PROPANE GRIDDLE OPPERATNG INSTRUCTIONS

PROPANE GRIDDLE OPPERATNG INSTRUCTIONS
OPERATION
1. Big John products are designed FOR OUTDOOR USE ONLY.
2. Prior to opening main cylinder valve, and lighting grill, place all control knobs in the "CLOSED"
position (turned to the left).
3. Open main cylinder valve. Hold a lit butane gun next to a burner and turn the burner control
knob to "OPEN" (pointing at you). The burner will ignite instantly. The second burner in each
section will instantly light by simply turning it on. Since each section is ignited separately, only
light the section required.
Please Note: If flame is not strong enough, you will need to restart the Griddle by first
turning off all burner valves, then turning off propane tank. Check to make sure that the
regulator is securely fastened to the propane tank, and there are no leaks in the line going to
the Griddle. Wait 30 seconds, then open propane tank before opening any burner valves.
Then light one burner at a time.
4. Once burners are lit, adjust the control knobs to desired temperature.
5. When finished cooking close all control knobs, close main cylinder valve and disconnect
propane cylinder.
6. Clean griddle surface with non-metallic pad or rag while grates are still hot. DO NOT USE A
WIRE BRUSH ON STAINLESS STEEL GRATES.
7. Griddles returned NOT cleaned will be subject to $40 cleaning charge.
Download PDF