APart MB150
The MB150 is a compact monoblock power amplifier that can be used as a stand-alone or
modular amplifier. It can either be used as an extra amplifier for separate rooms (e.g.
kitchen, bathroom, office,...), as a monitor amplifier or as an amplifier for a matrix or
multiroom system.
The amplifier accepts 2 ohm loads what allows you to connect up to 8 pieces of 16 ohm
loudspeakers in parallel. The front pannel of the amplifier has a volume control, headphone
jack input for monitoring and a signal, protection and limit led indication. The 0/180°
phase switch and 100 Hz low cut switch are some of the useful installer features on the rear
As no compromises were accepted on the component quality, the MB150 will guarantee
you a perfect sound quality.
Output Link
Output Power (RMS Program)
Frequency Response
Low cut
Power Supply
Dimensions (H x W x D)
XLR Balanced 775mV, 20 kOhm
RCA Cinch, 775 mV, 10 kOhm
Parallel to input RCA Cinch
8 Ohm: 100 watt / 140 watt Max
4 Ohm: 150 watt / 180 watt Max
2 Ohm: 170 watt / 200 watt Max
20 Hz - 30 kHz
100 Hz, 12 dB/oct
140 x 70 x 335 mm
3.6 Kg