POWER BANK KSIX 3000 MAH WITH RUBBER SUCTION + CABLE MICRO USB-USB DE 15CM BLACK Brand: KSIX SKU: BXBA3000UV EAN: 8427542056470 Capacity: 3000mAh Do you want to have extra battery on your Smartphone? The new POWERLIFE+ battery is what you need. Ksix POWERLIFE+ Rubber Suction and Micro USB cable you keep your Smartphone always operating. Their rubber suction cup brings a great usability slip, so you can set your Smartphone safely. Incorporates a LED smart indicator status who inform you when your device is fully charged. Is compatible with any Smartphone with Micro USB conector. Get their 3000 mAh power in your pocket and get a full charge while on the move, and very fast. It also has Multiple safety protection system to ensure devices safety: protection for overcharge, overvoltage, overcurrent and short circuit. Lightweight design, ideal for long trips or longer events. Product Information. Power Bank POWERLIFE+ + cable Micro USB-USB. External battery with rubber suction cup for great usability. LEDs display of remaining power. Slim design, high capacity. Battery type: Li-Polymer Battery. Capacity: 3000mAh-11.1 Wh. Input: Micro USB 5V-1.5A. Input: Micro USB 5V-1.5A. Dimension: 107 x 58 x 13.5mm. Weight: - + 10g. Length cable Micro USB-USB: 15cm. Fit for: smartphones, MP3, MP4, PSP, NDS and other 5V devices. How to use How to use the suction POWERLIFE+. 1- Turn on the Suction Powerlife+: short press the power button until the LED power indicator is on. 2- Press the power button to check the remaining power. The LED indicators will light indicating the power status. 3- Turn off the Suction Powerlife+: If no device is connected (no-load), the LED indicators will turn off after 10 seconds and the Suction Powerlife+: will automatic turn off after 120 seconds. How to charge the suction POWERLIFE+. 1- Charge by computer or adapter using the micro-USB port. 2- The LED indicators will flash when charging the Suction Powerlife+. 3- The led indicators will all light when charge is completed. How to test the remaining power. 1- Press the power button to check the remaining power. The LED indicators will light indicating the power status. 2- LED - 25% remaining power. 3- LED - 50% remaining power. 4- LED - 75% remaining power. 5- LED - 100% remaining power. NO LED - 0% remaining power How to charge your device. 1- Use your original USB data cable. Use the built-in USB plug. 2- Connect the device and the POWERLIFE+. 3- Turn on the POWERLIFE+. 4- While charging your device, the LED power indicators will lit up constantly. 5- Disconnect your device after fully charged.