HP | 589045-B21 | Datasheet | HP ProLiant 589045-B21 server

QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Overview
1.
2.
3.
4.
HP ProLiant BL680c Generation 5 (G5) Server Blade
Front view image
Cache battery modules
5. Two or four Intel® Xeon® 7400 series processors providing
up to 6 cores
Two small form factor (SFF) hot-plug drive bays
6. To 128 GB PC2-5300, DDR2 FB memory via 16 DIMMs
Power button
7. Three I/O expansion mezzanine slots
Local I/O connector
8. Four embedded Gigabit Ethernet adapter ports
At A Glance
This document covers the HP ProLiant BL680c G5 server blade only. For more information on the HP BladeSystem c-Class Enclosure
and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/12810_na.html
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
The HP ProLiant BL680c G5 Server Blade delivers no-compromise performance and expansion for a 4-core to 6-core
BladeSystem Server. With two or four Intel Xeon 7400 series processors, 128 GB of fully buffered memory, two hot-plug serial
attached SCSI (SAS) or serial ATA (SATA) hard drives, four embedded Gigabit Ethernet adapters (two multifunction) and three
I/O expansion slots, the HP ProLiant BL680c G5 delivers the density you want with the performance you need to handle the
most demanding enterprise class applications. The HP ProLiant BL680c G5 server blade includes:
DA - 12773
North America — Version 41 — August 30, 2011
Page 1
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Overview
Processor:
Two or four Intel Xeon 7400 series processors with up to 6 cores
NOTE: The BL680c G5 supports either two or four processors. One and three processors are not supported.
NOTE: All processors within the server must be identical.
Intel 7300 chip set supporting a 1066 MT/s Dedicated High-Speed Interconnect (DHSI)
Demand Based Switching (DBS) with Enhanced Intel SpeedStep® Technology on select models
Up to 16 MB of L3 cache
Intel® Virtualization Technology
Memory:
Sixteen (16) DIMM slots supporting:
128 GB PC2-5300, fully buffered DDR2-667MHz memory
64 GB PC2-5300, fully buffered DDR2-667MHz low power memory
Advanced ECC memory technology
Memory interleaving (2 x 1), memory mirroring, and online spare capacity
Storage Controller:
Integrated HP Smart Array P400i Controller with 256MB ECC protected cache and RAID 0 and 1
Upgrades include:
Battery-backed write cache (BBWC) for standard 256MB cache
512MB ECC protected cache upgrade with BBWC
Optional Storage Works P700m Controller with either 256MB cache, or 512MB cache with or without BBWC
Optional IO Accelerator cards for high I/O performance
Internal Drive Support:
Up to two (2) small form factor (SFF) SAS or SATA hot-plug hard drives
Support for the optional SB40c Storage Blade
Network Controller:
Four (4) embedded network adapter ports, plus one (1) additional management network adapter port:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP offload engine for Microsoft
Windows iSCSI boot, and optional accelerated iSCSI
One (1) NC326i Dual Port Gigabit Server Adapter
One (1) additional embedded 10/100 network adapter dedicated to iLO 2management
NOTE: The Gigabit Ethernet adapters transmit from the server at 2000 Mbps, full duplex per port. For more
information, see the "Network Controller" item in Standards Features section.
Mezzanine Support:
Three (3) mezzanine expansion slots; one Type I x4 PCIe (15 watts) and two x8 PCIe (25 watts). The expansion slots
provide a choice of for additional I/O mezzanine including:
Dual Port 4Gb Fibre Channel for SAN connectivity (choice of Emulex or QLogic)
Multiple dual port 10Gb Ethernet adapter options for high bandwidth network connectivity
Multiple dual and quad port Gigabit Ethernet network adapter options for increased bandwidth and additional
network ports
I/O Accelerators for high transaction rate local storage
4X DDR InfiniBand (20Gb) for low latency, high bandwidth server interconnectivity
For additional I/O expansion, the BL680c G5 supports the PCI Expansion Blade, see:
http://h18004.www1.hp.com/products/blades/expansion/index.html?jumpid=reg_R1002_USEN
Internal USB Support:
One (1) internal USB 2.0 connector for security key devices and USB drive keys
Infrastructure Management:
The server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also
require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades
Firmware Maintenance website at: http://h18004.www1.hp.com/products/blades/components/c-classcompmatrix.html.
HP Integrated Lights-Out 2 (iLO 2) management processor for simplified server setup, health monitoring and recovery,
power and thermal control, and lights-out remote administration.
DA - 12773
North America — Version 41 — August 30, 2011
Page 2
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Overview
HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money
by making it easy to deploy, monitor, control and optimize your IT infrastructure through a single, simple management
console. Insight Control supports both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to
continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data
center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's
changing business requirements.
Operating System Support:
Support
Microsoft Windows, RHEL, SLES, OEL, Sun Solaris, VMware ESX, and HP Essentials Citrix for XenServer
Form Factor:
The HP ProLiant BL680c G5 is a full height server blade that plugs into the HP BladeSystem c3000 and c7000
enclosures
Enclosures:
HP offers two different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 8 HP ProLiant BL680c servers plugged
vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 4 HP ProLiant BL680c servers plugged
horizontally.
Server blades, storage blades, and interconnect modules are all designed to fit into the c7000 and c3000 enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. Hard drives have
either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory
CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 12773
North America — Version 41 — August 30, 2011
Page 3
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
Processor
One of the following
depending on Model
Six-Core Processors
Intel® Xeon® E7458 (2.40GHz/6-core/16MB/90W) Processor
Intel® Xeon® E7450 (2.40GHz/6-core/12MB/90W) Processor
Intel® Xeon® L7455 (2.13GHz/6-core/12MB/65W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Four-Core Processors
Intel® Xeon® E7440 (2.40GHz/4-core/16MB/90W) Processor
Intel® Xeon® E7430 (2.13GHz/4-core/12MB/90W) Processor
Intel® Xeon® E7420 (2.13GHz/4-core/8MB/90W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Intel® Xeon® L7445 (2.13GHz/4-core/12MB/50W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
NOTE: All processors within the server must be identical.
NOTE: The BL680c G5 supports either two or four processors. One and three processors are not
supported.
NOTE: The letter preceding the model number indicates the performance/wattage of the processor. The
"E" denotes enterprise performance/wattage and the "L" denotes lower wattage.
NOTE: If upgrading an existing BL680c G5 server to a different processor, the server's ROM must be
flashed to the latest BIOS prior to the upgrade.
Upgradeability
Upgradeable to four processors
NOTE: The server supports two or four processors. One and three processors are not supported.
NOTE: All processors within the server must be identical.
NOTE: If upgrading an existing BL680c G5 server to a different processor, the server's ROM must be
flashed to the latest BIOS prior to the upgrade.
Cache Memory
Up to 16 MB level 3 cache memory
Chipset
Intel® 7300 chipset
Memory
Type
Standard
Maximum
PC2-5300 Fully Buffered DIMMs operating at 667 MHz
8GB (2 x 4GB)
128GB (16 x 8GB DIMMs)
64GB (16 x 4GB Low Power DIMMs)
NOTE: See the "DIMM installation guidelines" section for memory installation rules.
DA - 12773
North America — Version 41 — August 30, 2011
Page 4
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
Network Controllers
Four (4) embedded Gigabit Ethernet network adapter ports, plus (1) additional management network
adapter port:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP offload engine for
Microsoft Windows, iSCSI boot, and optional accelerated iSCSI
One (1) NC326i Dual Port Gigabit Server Adapter
One (1) additional embedded 10/100 network adapter dedicated to iLO 2 management
NOTE: The Gigabit Ethernet adapters transmit from the server at 2000 Mbps, full duplex per port.
However, within a Linux environment, the speed can be reduced or "throttled" using a feature available
within the Linux operating system.
Once the adapter signal reaches the interconnect within the blade enclosure and communicates outside
the blade enclosure to the LAN, the blade interconnect uplink types and settings determine the cable
media, speed, duplex mode, and auto negotiation mode. Interconnects are available with Ethernet
uplinks supporting 10/100/1000T, 10/100/1000 SFP, 1000 SX fiber, and 10Gb speeds.
Multifunction Networking The embedded multifunction NC373i combines standard Gigabit Ethernet networking, TCP/IP offload
engine (TOE) acceleration for Windows, iSCSI boot, and optional accelerated iSCSI into a single
adapter.
TOE moves the processing of data in the TCP protocol stack from the server CPU to the network
card, freeing CPU cycles for other activities. With TOE, network communications are improved,
and server efficiency is increased. The NC373i offers TOE for Microsoft® Windows.
The iSCSI boot allows the BL680c G5 to boot from a remote operating system (OS) image
located on a storage area network (SAN) within a Red Hat or SUSE Linux environment. The
BL680c G5 uses an iSCSI firmware image (iSCSI boot option ROM) making the remote disk drive
appear as a local, bootable C: drive. The BL680c G5 is configured to connect to and boot from
the iSCSI target disk on the network and download the OS image from the iSCSI target disk. The
iSCSI boot option ROM is supplied by HP at no cost. The additional cost and mezzanine slot
usage of an add-in iSCSI HBA card is not required. Additionally, the HP iSCSI boot solution
includes scripts to significantly simplify the installation process.
I/O Expansion Slots
Three I/O expansion mezzanine slots; one Type I x4 PCIe (15 watts) and two x8 PCIe (25 watts).
Integrated Manageability HP Integrated Lights-Out 2 (iLO 2) - (includes but not limited to functionality in Integrated Lights-Out 2
Standard Blade Edition (iLO 2)
DA - 12773
North America — Version 41 — August 30, 2011
Page 5
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
Storage Controller
The BL680c G5 includes an integrated Smart Array P400i Controller. The P400i is an x8 PCI Express
serial attached SCSI (SAS) v1.0 embedded RAID controller and provides server performance and
reliability through its support of advanced SCSI technology and RAID capabilities. The P400i includes
256MB of 40-bit ECC protected cache and supports RAID levels 0 (striping) and 1 (mirroring).
The controller supports both SAS and SATA hard drives letting you deploy drive technology as needed to
fit your computing environment. The BL680c G5 provides two hot-plug drive bays for up to 1.0TB of SAS
and 500GB of SATA storage.
Providing high availability data cache retention, the Smart Array P400i supports two battery backed write
cache (BBWC) options:
BBWC for the existing 25MB cache.
Upgrade to 72-bit 512MB ECC protected cache with BBWC.
If additional direct or shared storage SAS or SATA drives are desired within the server blade enclosure,
the BL680c G5 supports the SB40c Storage Blade through use of the HP PCI Express Mezzanine PassThru Card installed in mezzanine slot 3. For additional information see the "Additional Options" section
below and http://h18006.www1.hp.com/products/storageworks/sb40c/index.html
Maximum Internal
Storage
One of the following
depending on Model
Hot Plug Serial Attach
SCSI (SAS)
Hot Plug Serial Attach
(SATA)
1.0TB SAS
2 x 500GB SAS
1.0TB SATA
2 x 500GB SATA
Graphics
Integrated ATI RN-50 1280 x 1024 x 16M color (32 MB DDR1 memory)
Resolution Color Depths 1280 x 1024, 16.7M , 64k, 256,16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
Fibre Channel
Up to three 4 Gb Fibre Channel HBA mezzanines are supported ordered separately:
Emulex LPe1105-HP 4Gb FC HBA for HP c-Class BladeSystem (403621-B21)
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem (403619-B21)
NOTE:
NOTE For additional information on the optional 4 Gb Fibre Channel HBA mezzanines, see:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
Compatible SAN
HP ProLiant BL680c G5 server blades are optimized for HP MSA, EVA, and XP
HP ProLiant BL680c G5 server blades are compatible with select third party SANs (please see blade
storage page for more details: http://h18004.www1.hp.com/products/blades/components/c-classsans.html
HP Insight management
software
HP Insight Foundation
DA - 12773
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
North America — Version 41 — August 30, 2011
Page 6
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
with tools that meet the challenges of managing today's complex
Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: www.hp.com/go/foundation.
The foundation pack includes:
HP SmartStart
HP Management DVD
HP ProLiant Smart Update Firmware DVD
Minimum SmartStart version supported is SmartStart 7.60, see:
http://www.hp.com/servers/smartstart
HP Integrated Lights-Out
(iLO)
HP Insight Control
NOTE: In an effort to support reducing our environmental impact, the HP
Insight Foundation Suite for ProLiant media will be available as a selectable
option for this server at time of order of a CTO SKU. This will allow
customers to order the number of media kits that best meet their needs and
eliminate receiving unnecessary duplicate media.
HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring,
power and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP iLO functions without additional software and
can be accessed from any location via a web browser. HP iLO works handin-hand with HP Systems Insight Manager, Insight Control, and Insight
Dynamics for ProLiant, helping customers unleash the value of the ProLiant
platform and deliver the highest possible quality of IT service. For more
information, visit: www.hp.com/go/iLO
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, monitor, remote control, and optimize your IT infrastructure through
a single, simple management console.
Two versions of Insight Control are available, to serve environments requiring
either a Linux-based or a Windows-based central management server: HP
Insight Control for Linux, and HP Insight Control. See
www.hp.com/go/insightcontrol
HP Insight Dynamics for
ProLiant
DA - 12773
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff and
proactive delivery of software updates. For more information about this
service, please visit: http://www.hp.com/services/insight
HP Insight Dynamics for ProLiant, a product option, is an integrated
command center that enables IT Staff personnel to continuously analyze and
optimize a converged infrastructure, while automating and reducing the cost
of common data center tasks by as much as 40 percent. As a powerfully
integrated by design toolkit to accelerate complex technology projects and
simplify daily operations that ultimately enable IT Staff personnel to
dynamically keep pace with the organizations changing business
requirements. It enables them to plan capacity and power continuously,
balance across physical and virtual resources, and ensure cost-effective high
North America — Version 41 — August 30, 2011
Page 7
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
availability. It also enables IT organizations to provision infrastructure
consistently and automatically from pools of shared resources using a selfservice portal. Resources provisioned can range from a single virtual
machine to complex multi-tier environments and their associated physical
and virtual resource requirements. In addition to the previous functional
benefits, it also provides a cost-effective disaster recovery for physical and
virtual environments that works with HP Continuous Access software for both
the Enterprise Virtual Array and the XP storage array allowing application
environments to be reactivated in minutes with the touch of a button to a
remote location.
NOTE: For more information, visit:
http://www.hp.com/go/insightdynamics
High Performance
Clusters
HP Cluster Platforms
HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a
choice of servers, networks and software. Operating system options include
specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster
Platform Configurator simplifies ordering. http://www.hp.com/go/clusters
HP HPC Interconnects
High Performance Computing (HPC) interconnect technologies are available
for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when
integrated within an HP cluster. Flexible, validated solutions can be defined
with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Cluster Management HP Cluster Management Utility (CMU) is an HP-licensed and HP-supported
Utility
suite of tools that are used to manage large-scale Linux ProLiant systems.
CMU includes software for the centralized provisioning, management and
monitoring of nodes. CMU makes the administration of clusters user friendly,
efficient, and effective. http://www.hp.com/go/cmu
HP HPC Linux Value Pack HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported
specially priced software bundle for the development and deployment of
applications on HPC Cluster Platforms. Value Pack includes the Platform
HPC Enterprise Edition suite of tools including the LSF workload scheduler,
the HP-MPI parallelization library. Also included are the HP Unified Parallel
C compiler and the HP Shmem library, as well as the execution environments
for the libraries and compiler. HP HPC Linux Value Pack
DA - 12773
North America — Version 41 — August 30, 2011
Page 8
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Microsoft Windows Server Hyper V
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Enterprise Linux (OEL)
Sun Solaris 10 for x86/x64 based Systems
VMware ESX Server
HP Citrix Essentials for XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, including how to purchase from
HP, please visit our OS Support Site at: http://www.hp.com/go/ossupport and our driver download
page: http://www.hp.com/support/BL680cG5
Availability
Optional dual-port 4Gb Fibre Channel mezzanine cards for redundant SAN connection
Four (4) embedded Gigabit Ethernet adapters for redundant LAN connections
Multiple mezzanine I/O expansion slots each routed to redundant interconnect modules
Two (2) hot-plug SAS/SATA hard drive bays
Integrated Smart Array P400i Controller with ECC protected cache and battery backed write
cache options
Advanced ECC Memory that can correct a multi-bit error (up to 4 bits) that occurs within one
memory chip
Memory mirroring with memory online spare capacity
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load
balancing)
Industry Standard
Compliance
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
PXE 2.1
IEEE (see the Technical Specifications section)
Security
One (1) internal USB 2.0 connector for security key devices and USB drive keys
Power-on password
Administrator's password
Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
Integrated Lights-Out 2 can be disabled via a global setting
DA - 12773
North America — Version 41 — August 30, 2011
Page 9
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Standard Features
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services on your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
valued customers. If you require "custom" rack configuration, please contact HP's Customer Business
Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator.
DA - 12773
North America — Version 41 — August 30, 2011
Page 10
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who
understands your increasingly complex business technology environment. That's why it makes sense to
team up with the people who know HP infrastructure hardware and software best - the experienced
professionals at HP Services.
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and manage
IT and infrastructure solutions. This way, HP proposes services solutions that include more than just uplift
of base warranty. You can get the support you need by choosing from one of a number of service
packaged solutions we have designed to address wider set of customer support needs.
HP Technology Services meets business challenges with services offered in three packages
Optimized Care Package, Standard Care Package, and Basic Care Package - available for each
product group. Such packaged solutions enable customers to optimize technology operations, minimize
risk and drive better business outcomes with easy-to-buy, easy-to-use scalable support packages for
servers, storage, networking and software.
Optimized Care Package Supports maintaining servers at optimum performance availability
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000
enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and
VPM. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW
3-Year HP Critical Advantage L3 for c3000/c7000 enclosure + 3-Year HP Critical Advantage for
Blade server
Provides end-to-end infrastructure support solution for business critical applications running on
virtualized/x86 infrastructures, enabling the customers to cost effectively build, operate, and continuously
improve their IT environment.
http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA3-1772ENW
Additional Services:
Services Virtualization Services - Strategy, Design, Transition, Operation, Continual Service
Improvement.
DA - 12773
North America — Version 41 — August 30, 2011
Page 11
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Service and Support
Standard Care Package
Package that maintains high level of server availability
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000
enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and
VPM. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to facilitate
proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW
3-Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for c3000/c7000 enclosure + 3Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for Blade server
Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the
system to help return the hardware to operating condition within 6 hours of the initial service request to
the HP Global Solution Center. http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EN.pdf
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL
series servers or HP BladeSystem servers.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
1-Year HP Proactive Select 30 Credit
Provides a flexible way to purchase HP best-in-class consultancy and technical services.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-3842ENN.pdf
Additional Services:
Services Software OS (Microsoft, Linux (SUSE/Red Hat) & VMware Installation & Start Up
and Software Support); Microsoft or Linux or VMware education courses; +60 Proactive Select Credits,
Factory Express.
Basic Care Package
Delivers minimum recommended support service level
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000
enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and
VPM. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW
3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for c3000/c7000 enclosure +
3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for Blade server
Provides you with rapid remote support and if required an HP authorized representative who will arrive
on site any time and day of the year to begin hardware maintenance service within 4 hours of the service
request being logged. http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL
series servers or HP BladeSystem servers.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
DA - 12773
North America — Version 41 — August 30, 2011
Page 12
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Service and Support
1-Year HP Proactive Select 10 Credit
Provides a flexible way to purchase HP best-in-class consultancy and technical services.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-3842ENN.pdf
Additional Services:
Services Startup Blade System c-Cass Enhanced Network Service; Software OS (Microsoft,
Linux (SUSE/Red Hat) & VMware Installation & Start Up and Software Support); +30 Proactive Select
Credits, Factory Express.
Insight Remote Support
The packages include HP Insight Remote Support that uses proven technology to deliver secure, reliable
24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional cost to all
warranty, HP Care Pack Service, and service agreement customers.
For more information
To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales
representative or HP Authorized Channel Partner. Or visit: www.hp.com/services/bladesystem
DA - 12773
North America — Version 41 — August 30, 2011
Page 13
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Models
4 or 6-Core 7400 Series Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
(2) Intel® Xeon® E7458 (2.40GHz/6-core/16MB/90W) Processor
HP ProLiant BL680c G5 Processor(s)
E7458 2P 8GB-R
Two of the following
(2) Intel® Xeon® E7450 (2.40GHz/6-core/12MB/90W) Processor
P410i/256 SAS/SATA 2 depending on Model
(2) Intel® Xeon® E7440 (2.40GHz/4-core/16MB/90W) Processor
SFF Server
(2) Intel® Xeon® E7430 (2.13GHz/4-core/12MB/90W) Processor
517409-B21
16 MB Level 3 cache memory
Cache Memory
One of the following
12 MB Level 3 cache memory
HP ProLiant BL680c G5 depending on Model
8 MB Level 3 cache memory
E7450 2P 8GB-R
8 GB (2x4 GB) PC2-5300, FBD DDR2-667
Memory
P410i/256 SAS/SATA 2
Four (4) embedded Gigabit Ethernet network adapter ports, plus one (1)
Network Controllers
SFF Server
additional management network adapter port:
492334-B21
HP ProLiant BL680c G5
E7440 2P 8GB-R
P410i/256 SAS/SATA 2
SFF Server
492335-B21
HP ProLiant BL680c G5
E7430 2P 8GB-R
P410i/256 SAS/SATA 2
SFF Server
492336-B21
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
DA - 12773
Two (2) embedded NC373i Multifunction Gigabit Server Adapters
with TCP/IP offload engine for Microsoft Windows, iSCSI boot, and
optional accelerated iSCSI
One (1) NC326i Dual Port Gigabit Server Adapter
One (1) additional embedded 10/100 network adapter dedicated to
iLO 2 management
Integrated HP Smart Array P400i Controller with 256MB cache and RAID 0
and 1. Optional battery-backed write cache upgrades.
No drives included; supports up to two (2) SFF SAS/SATA drives
SAS: 1TB; SATA: 1TB
None
Up to 4 full-height blades in the HP BladeSystem c3000 enclosure
Up to 8 full-height blades in the HP BladeSystem c7000 enclosure
North America — Version 41 — August 30, 2011
Page 14
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
NOTE: Configure-to-order servers must start with a CTO Blade.
NOTE: FIO indicates that this option is a factory installable option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
HP Models
HP ProLiant BL680c G5 Configure-to-order Server
Configurable model ships with:
1. Four (4) embedded Gigabit Ethernet network adapter ports, plus one (1)
additional management network adapter port:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with
TCP/IP offload engine for Microsoft Windows, iSCSI boot, and optional
accelerated iSCSI
One (1) NC326i Dual Port Gigabit Server Adapter
One (1) additional embedded 10/100 network adapter dedicated to iLO
2 management
2. Integrated HP Smart Array P400i Controller with RAID 0 and 1.
NOTE: A controller cache module selection is required. In the "HP Storage
Controllers" section of step 2 below, select either the 256 MB module (with or
without optional BBWC) or the 512 MB module with BBWC.
3. Two (2) small form factor (SFF) SAS/SATA hot-plug hard drive bays
4. Three I/O expansion slots: one Type I x4 PCIe (15 watts) and two x8 PCIe (25
watts)
5. Integrated Lights-Out 2 Standard Blade Edition
443527-B21
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted):
HP Processors
NOTE: The BL680c G5 supports either two or four processors. One and three
processors are not supported.
NOTE: All processors within the server must be identical.
NOTE: All processor kits contain two (2) processors.
NOTE: If 4 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
Six-Core Processors
HP BL680c G5 Intel® Xeon® E7458 (2.40GHz/6-core/16MB/90W) FIO Processor
Kit
HP BL680c G5 Intel® Xeon® E7450 (2.40GHz/6-core/12MB/90W) FIO 2processor Kit
HP BL680c G5 Intel® Xeon® L7455 (2.13GHz/6-core/12MB/65W) FIO 2-processor
Kit
Four-Core Processors
HP BL680c G5 Intel® Xeon® E7440 (2.40GHz/4-core/16MB/90W) FIO 2processor Kit
HP BL680c G5 Intel® Xeon® E7430 (2.13GHz/4-core/12MB/90W) FIO 2processor Kit
DA - 12773
North America — Version 41 — August 30, 2011
517411-L21
492344-L21
492348-L21
492345-L21
492346-L21
Page 15
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Configuration Information - Factory Integrated Models
HP Memory
HP Storage Controller
Cache Options
HP BL680c G5 Intel® Xeon® E7420 (2.13GHz/4-core/8MB/90W) FIO 2-processor
Kit
HP BL680c G5 Intel® Xeon® L7445 (2.13GHz/4-core/12MB/50W) FIO 2-processor
Kit
HP 4GB Fully Buffered DIMM PC2-5300 2x2GB Low Power DDR2 Memory Kit
HP 8GB Fully Buffered DIMM PC2-5300 2x4GB DDR2 Memory Kit
HP 8GB Fully Buffered DIMM PC2-5300 2x4GB Low Power DDR2 Memory Kit
HP 16GB Fully Buffered DIMM PC2-5300 2x8GB DDR2 Memory Kit
HP 64GB Fully Buffered DIMM PC2-5300 8x8GB DDR2 Memory Kit
NOTE: For more information low power memory option kits and other ProLiant
energy efficient features, see:
http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: Two-way memory interleaving is enabled when an identical pair of DIMMs is
installed.
NOTE: For additional HP Storage Controller Cache options see the Additional
Options section of this Quickspec.
HP Smart Array P400 256MB FIO Cache Module
NOTE: Supports Smart Array P400 Controller and Smart Array P400i Controller.
492347-L21
493577-L21
461828-B21
397415-B21
466440-B21
413015-B21
495604-B21
405139-B21
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, including server blade enclosures interconnect and mezzanine options and power subsystem options;
please see the Core Options and Additional sections below and the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/12810_na.html
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
DA - 12773
North America — Version 41 — August 30, 2011
Page 16
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Core Options
NOTE: For additional "Core Options" and "Additional Options" please see the options sections below.
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use
of an HP approved configurator. Contact your local sales representative for additional information.
HP Ethernet Mezzanine
Gigabit Ethernet Mezzanines
Options
HP NC325m PCI Express Quad Port Gigabit Server Adapter
416585-B21
HP NC360m Dual Port 1GbE BL-c Adapter
445978-B21
HP NC364m Quad Port 1GbE BL-c Adapter
447883-B21
HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter
453246-B21
10 Gigabit Ethernet Mezzanines
HP NC532m Dual Port 10GbE Multifunction BL-c Adapter
467799-B21
NOTE: The NC532m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or
bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m will downspeed to 1Gb if paired with a 1GbE interconnect.
HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
581204-B21
NOTE: The NC550m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or
bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC550m requires a minimum of 2 GB of server memory.
NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 device. The NC550m will only support 1000Mbps when
connected to a 1Gb Ethernet interconnect.
HP Fibre Channel
Mezzanine Options
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
HP Processors
NOTE: The BL680c G5 supports either two or four processors. One and three
processors are not supported.
NOTE: All processors within the server must be identical.
NOTE: All processor kits contain two (2) processors.
NOTE: If upgrading an existing BL680c G5 server to a different processor, the server's
ROM must be flashed to the latest BIOS prior to the upgrade.
Six-Core Processors
HP BL680c G5 Intel® Xeon® E7458 (2.40GHz/6-core/16MB/90W) Processor Kit
HP BL680c G5 Intel® Xeon® E7450 (2.40GHz/6-core/12MB/90W) 2-processor Kit
HP BL680c G5 Intel® Xeon® L7455 (2.13GHz/6-core/12MB/65W) 2-processor Kit
Four-Core Processors
HP BL680c G5 Intel® Xeon® E7440 (2.40GHz/4-core/16MB/90W) 2-processor Kit
HP BL680c G5 Intel® Xeon® E7430 (2.13GHz/4-core/12MB/90W) 2-processor Kit
HP BL680c G5 Intel® Xeon® E7420 (2.13GHz/4-core/8MB/90W) 2-processor Kit
HP BL680c G5 Intel® Xeon® L7445 (2.13GHz/4-core/12MB/50W) 2-processor Kit
DA - 12773
North America — Version 41 — August 30, 2011
403621-B21
403619-B21
517411-B21
492344-B21
492348-B21
492345-B21
492346-B21
492347-B21
493577-B21
Page 17
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Core Options
HP Memory
HP 4GB Fully Buffered DIMM PC2-5300 2x2GB Low Power DDR2 Memory Kit
HP 8GB Fully Buffered DIMM PC2-5300 2x4GB DDR2 Memory Kit
HP 8GB Fully Buffered DIMM PC2-5300 2x4GB Low Power DDR2 Memory Kit
HP 16GB Fully Buffered DIMM PC2-5300 2x8GB DDR2 Memory Kit
HP 64GB Fully Buffered DIMM PC2-5300 8x8GB DDR2 Memory Kit
HP Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 146GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 72GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard
Drive
NOTE: SAS Enterprise drives have a 3 year warranty.
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
HP 160GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for additional information:
http://h18004.www1.hp.com/products/quickspecs/13021_na/13021_na.html
DA - 12773
North America — Version 41 — August 30, 2011
461828-B21
397415-B21
466440-B21
413015-B21
495604-B21
507127-B21
512547-B21
507125-B21
512545-B21
507610-B21
507750-B21
530888-B21
Page 18
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use
of an HP approved configurator. Contact your local sales representative for additional information.
HP Insight Software
Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic
T9074BAE
License
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server
452148-B22
License
HP Insight Software Media Kit
436222-B21
NOTE: Insight Software DVD media without licenses. Contains HP Systems Insight
Manager, HP Insight Control, HP Insight Dynamics, HP Insight Control for Microsoft
System Center, and Virtual Connect Enterprise Manager software. Uses an integrated
installer to perform quick and accurate software installation and updates.
NOTE: Licenses ship without media. The Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Insight Control for Linux
HP Insight Control for Linux including 1yr 24x7 Support Single Server License
TC209A
HP Insight Control for Linux including 1yr 24x7 Support Electronic License
TC213AAE
NOTE: This part number can be purchased as a single license or as multiple licenses
with a single activation key. Customer will receive a license entitlement certificate via
e-mail. The license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service.
HP Insight Control for Linux Media Kit
TC208A
NOTE: This optional Media pack DVD contains the ISO image for HP Insight Control
for Linux, HP Systems Insight Manager, HP Insight Control power management, HP
Insight Control virtual machine management, and an integrated installer. Servers must
be acquired separately.
NOTE: This Media pack is optional because the latest ISO image and latest updates
may be downloaded at no cost from: http://www.hp.com/go/ic-linux (click on
Download button).
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be
ordered separately, or can be downloaded at: http://www.hp.com/go/ic-linux (click
on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
DA - 12773
North America — Version 41 — August 30, 2011
Page 19
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Additional Options
HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Management
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Electronic License
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server License
NOTE: This license allows 1 server to be managed via HP iLO Advanced for
BladeSystem. Customer will receive a printed license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online or via
fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support Service.
NOTE: For additional license kits, including electronic delivery options, please see the
iLO QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12362_na/12362_na.html
HP Insight Control server deployment
HP Insight Control Server Deployment including 1yr 24x7 Support Electronic License
HP Insight Control Server Deployment including 1yr 24x7 Support Single Server
License
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be
ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html
High Performance
Clusters
HP Cluster Management Utility
HP Cluster Management Utility Compute Node Flexible License
NOTE: This part number can be used to purchase one certificate for multiple licenses
with a single activation key. Each license is for one node (server). Customer will
receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in
order to obtain a license key.
HP Cluster Management Utility License and Media
NOTE: Order a minimum of one license per cluster to purchase media including
software and documentation, which will be delivered to the customer, and also
licenses CMU management. No license key is delivered or required.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_na/12612_na.html
HP HPC Linux Value Pack
HP High Performance Computing Linux Value Pack 1 Processor Flexible License
NOTE: This part number can be used to purchase one certificate for multiple licenses
with a single activation key. Each license is for one socket (a.k.a. processor).
Customer will receive a printed end user license agreement and license entitlement
certificate via physical shipment. The license entitlement certificate must be redeemed
online in order to obtain a license key.
DA - 12773
North America — Version 41 — August 30, 2011
TA851AAE
512488-B21
T9082AAE
452151-B21
QL803A
433257-B21
TC293B
Page 20
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Additional Options
HP Storage Controllers
HP High Performance Computing Linux Value Pack Media Kit
NOTE: This part number can be used to purchase media including software and
documentation, which will be delivered to the customer.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_na/13485_na.html
TC294A
HP Smart Array P700m/256 4-ports Ext PCIe x8 SAS Controller
HP Smart Array P700m/512 4-ports Ext PCIe x8 SAS Controller
Optional Upgrades
HP 512MB w/Battery Smart Array Battery Back Write Cache Enabler
NOTE: Supports Smart Array P400 Controller and Smart Array P400i Controller.
507925-B21
508226-B21
HP Smart Array Cache Battery Kit
NOTE: Supports Smart Array P400 Controller and Smart Array P400i Controller.
HP Smart Array P-Series Low Profile Battery
383280-B21
HP I/O Expansion
Options
HP 320GB IO Accelerator for BladeSystem c-Class
HP 640GB IO Accelerator for BladeSystem c-Class
NOTE: Please see the QuickSpecs for technical specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13220_na/13220_na.html
HP c-Class Mezzanines
HP Pass Thru Card for HP BladeSystem c-Class
HP BL c-Class SB40c PCI Express Mezzanine Pass Thru Option Kit
NOTE: Required to support the HP SB40c Storage Blade (P/N 411243-B21), PCI
expansion Blade (P/N 448018-B21), and Ultrium tape blades with HP c-Class
BladeSystem full-height server blades. The PCI Express Mezzanine Pass-Thru Card
must be installed in mezzanine slot 3.
HP Tape Blades
HP SB1760c Tape Blade
HP LTO-5 SB3000c Tape Blade
NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem c-Class
(P/N 431643-B21) is required to support the HP Tape Blades. The PCI Express
Mezzanine Pass-Thru Card must be installed in mezzanine slot 3 of the BL680c G5.
Please see the QuickSpecs for technical specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
DA - 12773
North America — Version 41 — August 30, 2011
405148-B21
452348-B21
AJ878B
BK836A
431643-B21
AQ697A
BS580A
Page 21
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Additional Options
HP SB40c Storage Blade HP SB40c Storage Blade
NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem c-Class
(P/N 431643-B21) is required to support the HP SB40c Storage Blade. The PCI
Express Mezzanine Pass-Thru Card must be installed in mezzanine slot 3 of the
BL680c G5. Please see the QuickSpecs for technical specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12587_na/12587_na.html
411243-B21
HP Expansion Blade
448018-B21
HP BLc PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe
connect board which requires installation.
NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem c-Class
(P/N 431643-B21) is required to support the HP PCI Expansion Blade with HP c-Class
BladeSystem full-height server blades. The PCI Express Mezzanine Pass-Thru Card
must be installed in mezzanine slot 3. Please see the QuickSpecs for Technical
Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/12753_na/12753_na.html
HP USB and SD Options HP USB 2-Button Optical Scroll Mouse
HP USB 04 Standard Keyboard
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the
VMware virtualization environment and other HP value-add software like SmartStart.
HP recommends this industry standard USB flash device for use with VMware ESXi.
USB device must be installed in the internal slot of the ProLiant server for use with
VMware ESXi. Refer to HP VMware Getting Started Guide for installation instructions.
HP Care Pack Services
NOTE:
NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server
blades, cover the server blade and all HP branded hardware options qualified for the
server, purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
HP 3 year 4 hour 13x5 BL6xxc Server Blade Hardware Support
HP 3 year 4 hour 24x7 BL6xxc Server Blade Hardware Support
HP 3 year 6 hour 24x7 Call to Repair BL6xxc Server Blade Hardware Support
DA - 12773
North America — Version 41 — August 30, 2011
DC172B
DT528A#ABA
608447-B21
UK108E
UK109E
UK110E
Page 22
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
NOTE: For a specific memory level, the best performance is achieved using a homogenous memory configuration.
DIMM installation guidelines:
1.
2.
3.
4.
5.
All memory must be PC2-5300 fully buffered DDR2 DIMMs operating at 667 MHz.
Both DIMM slots in a memory bank must be populated.
Banks must be populated in sequential alphabetic order, starting with bank A.
Both DIMMs in a memory bank must be identical. Install identical DIMMs as pairs only, starting with DIMM socket 1, bank A.
Standard memory and lower power DIMMs may be mixed within the same server, but not within the same memory bank (see
#4 above).
6. Low power DIMM kits save approximately 2 watts per server DIMM, plus any datacenter power savings resulting from reduced
cooling of heat dissipated from the lower server watt usage.
7. Multiple advanced memory protection (AMP) modes are supported based on fully buffered DIMM population and RBSU
selection. The server blade defaults to advanced ECC.
Standard Memory
8GB (2 x 4GB) of PC2-5300, FBD DDR2-667 ECC DIMMs
Standard Memory Plus Optional Memory
Up to 116GB of memory is available with the installation of optional PC2-5300, FBD DDR2-667 DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 128GB of memory is available with the removal of standard memory and the installation of optional PC2-5300, FBD DDR2667 DIMM memory expansion kits.
Memory
Standard
Optional
Maximum
Slot
8GB
1A
4 GB
9B
Empty
2C
Empty
10D
Empty
3E
Empty
11F
Empty
4G
Empty
12H
Empty
5A
4 GB
13B
Empty
6C
Empty
14D
Empty
7E
Empty
15F
Empty
8G
Empty
16H
Empty
116GB
1A
4 GB
9B
8 GB
2C
8 GB
10D
8 GB
3E
8 GB
11F
8 GB
4G
8 GB
12H
8 GB
5A
4 GB
13B
8 GB
6C
8 GB
14D
8 GB
7E
8 GB
15F
8 GB
8G
8 GB
16H
8 GB
128GB
1A
8 GB
9B
8 GB
2C
8 GB
10D
8 GB
3E
8 GB
11F
8 GB
4G
8 GB
12H
8 GB
5A
8 GB
13B
8 GB
6C
8 GB
14D
8 GB
7E
8 GB
15F
8 GB
8G
8 GB
16H
8 GB
DA - 12773
North America — Version 41 — August 30, 2011
Page 23
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Memory
HP ProLiant BL680c G5 memory options:
Following are memory options available from HP:
HP Memory
HP 4GB Fully Buffered DIMM PC2-5300 2x2GB Low Power DDR2 Memory Kit
HP 8GB Fully Buffered DIMM PC2-5300 2x4GB DDR2 Memory Kit
HP 8GB Fully Buffered DIMM PC2-5300 2x4GB Low Power DDR2 Memory Kit
HP 16GB Fully Buffered DIMM PC2-5300 2x8GB DDR2 Memory Kit
HP 64GB Fully Buffered DIMM PC2-5300 8x8GB DDR2 Memory Kit
DA - 12773
North America — Version 41 — August 30, 2011
461828-B21
397415-B21
466440-B21
413015-B21
495604-B21
Page 24
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Storage
1-2
2 x SFF SAS or SATA hot-plug hard drives
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should
operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Quantity
Position
Supported
Supported
Controller
300GB 6G SAS 10K
2
1-2
Smart Array P400i Controller
146GB 6G SAS 10K
146GB 6G SAS 15K
72GB 6G SAS 15K
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
Controller
500GB 6G SAS 7.2K
2
1-2
HP Smart Array P400i Controller
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
500GB 3G SATA 7.2K
2
1-2
160GB 3G SATA 7.2K
DA - 12773
Controller
HP Smart Array P400i Controller
North America — Version 41 — August 30, 2011
Page 25
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Technical Specifications
System Unit
Dimensions
(H x W x D)
Weight
(approximate)
Power Specifications
Full height server blade:
14.42 x 2.03 x 20.06 in (36.17 x 5.16 x 50.95 cm)
Maximum
21 lb (9.5 kg)
(all hard drives and
processors installed)
Minimum
19 lb (8.6 kg)
(one hard drive and
processor installed)
For power specifications including input requirements, BTU rating, and
power supply output, please see the HP BladeSystem c-Class Enclosures
QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/
12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/
12810_na.html
To review typical system power ratings use the HP BladeSystem Power Sizer
available at: http://www.hp.com/go/bladesystem/powercalculator.
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed. System performance may be reduced if
operating with a fan fault or above 30°C (86°F).
Non-Operating
-30° to 60°C (-22° to 140°F), maximum rate of
change is 20°C/hr (36°F/hr).
Relative Humidity
Operating
10 to 85% relative humidity (Rh), 28°C (82.4°F)
(non-condensing)
maximum wet bulb temperature, noncondensing.
Non-Operating
10 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, noncondensing.
Altitude
Operating
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
For acoustic noise specifications, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/
12790_na.html
DA - 12773
North America — Version 41 — August 30, 2011
Page 26
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Technical Specifications
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/
12810_na.html
Smart Array P400i
Controller
Disk Drive and Enclosure 3G SAS (Serial Attached SCSI)
Interface
1.5G SATA (Serial Advanced Technology Attachment)
2 internal (SFF8484) x4 wide port connectors
SAS Connectors
DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
Cache Memory Speed
maximum bandwidth.
x8 2.5G PCIe provides 2 GB/s maximum bandwidth.
Server Interface
x8 3G SAS provides 2.4 GB/s maximum bandwidth.
SAS Speed
40-bit 256 MB cache (72-bit 512MB module upgrades available); ECC
Cache Memory
protection, battery-backed, and transportable
Logical Drives Supported Up to 32 logical drives
Maximum Logical Drive 1.0 TB (2 x 500 GB) SAS
Capacity
1.0 TB (2 x 500 GB) SATA
Host Memory Addressing 64-bit, supporting greater than 4 GB server memory space
RAID 1 (Mirroring), RAID 0 (Striping)
RAID Support
Upgradeable firmware with recovery ROM feature
Upgradeable Firmware
Embedded NC326i Dual Network Processor
Port Gigabit Server
Data Transfer Method
Adapter
Network Transfer Rate
IEEE Compliance
Standard Features
DA - 12773
Broadcom 5715S
Four lane (x4) PCI Express
Two ports, each at 2000 Mb/s full duplex only (theoretical maximum)
802.1p, 802.1Q, 802.3, 802.3ad, and 802.3x
9K Jumbo frames
TCP/IP checksum offload (TCO)
Large send offload (LSO)
Interrupt coalescence
Dual address cycles (DAC)
Wake-on-LAN (WOL)
Pre-boot execution environment (PXE) v2.1
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
IPv6 packet transmit and receive (excluding all offload capabilities);
IPv6 aware SNMPv1 agents for Windows
North America — Version 41 — August 30, 2011
Page 27
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Technical Specifications
Embedded NC373i
Multifunction Gigabit
Server Adapters
Network Processor
Data Transfer Method
Network Transfer Rate
IEEE Compliance
Standard Features
HP Integrated Lights-Out Architecture
2 (iLO 2)
Processor
integrated on system
Upgradeability
board
Operating System
Support
Client Browser Support
Command Line Support
DA - 12773
Broadcom 5708S
Four lane (x4) PCI Express
2000 Mb/s per port full duplex only (theoretical maximum value)
802.1p, 802.1Q, 802.3, 802.3ad, and 802.3x
TCP/IP offload engine (TOE) for Microsoft Windows
iSCSI boot
Optional accelerated iSCSI
9K Jumbo frames
TCP/IP checksum offload (TCO)
Large send offload (LSO)
Interrupt coalescence
Dual address cycles (DAC)
Wake-on-LAN (WOL)
Pre-boot execution environment (PXE) v2.1
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
IPv6 packet transmit and receive (excluding all offload capabilities);
IPv6 aware SNMPv1 agents for Windows
32-bit PCI-based health and remote management ASIC
32-bit RISC processor core running at 66MHz
Option firmware upgradeable via Flash ROM
Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)
Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)
Microsoft Windows Server 2003 and Windows Server 2003 R2, and
Windows Server 2003 for Extended Systems Standard Edition, Enterprise
Edition
Red Hat Enterprise Linux 5.4 (32bit and 64bit)
SUSE LINUX Enterprise Server 11 (32bit and 64bit)
SUSE LINUX Enterprise Server 10 (32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Microsoft Windows XP Professional Edition
Microsoft Windows Vista Business and Ultimate Editions
Red Hat Enterprise Linux Desktop 5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows and Linux systems)
Firefox 3.0 (on supported Windows and Linux systems)
Telnet, Secure Shell and serial port access
Secure Socket Layer
Secure Shell version 2 (Password and certificate)
North America — Version 41 — August 30, 2011
Page 28
QuickSpecs
HP ProLiant BL680c Generation 5 (G5) Server Blade
Technical Specifications
Security
Advanced Encryption Standard (AES) and Triple Data Encryption Standard
(3DES) on browser, CLP and XML scripting interface
RC4 encryption of video
Directory Support Services Active Directory v1.0 (Windows 2003)
Driver Support
Health Driver (HP ProLiant iLO 2 Management Controller Driver)
iLO Management Channel Interface Driver
SNMP 2, IPMI 2.0 (KCS interface), DMTF Server Management Command
Management protocols
supported
Line Protocol Specification
(SM CLP), DMTF Web Services Management Specification (WS Management)
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft is a US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes (1,000 MB). Actual formatted capacity is less.
DA - 12773
North America — Version 41 — August 30, 2011
Page 29
Download PDF

advertising