CompactFlash Card
Product
:
CompactFlash Card
Part Number:
6ACX-XXXXXRXXX
Description :
CompactFlash Card
Release Date
Customer
:
2010.07.19
:
Customer approve:
Approved
Prepared by
LEVEL
DSC10007
Person
Rev. A.1
July. 2010
CompactFlash Card
說明事項:
1、 此交貨規格書,請簽名或蓋章承認後,將正本寄回本公司。
2、 此交貨規格書若需變更內容,請與本公司協議後標示變更處後送回,本公司將發行更正版供簽署
承認。
3、 若待承認產品使用於非本公司先前同意之用途及條件時,請先通知我方對應窗口。
4、 本公司努力提升產品品質及可靠度,惟半導體產品有其故障發生之或然率,因此本公司半導體產
品之設計,係以不造成人身傷害事故、火災事故、公共安全事件的考量為設計前提。
5、 此產品為一般半導體應用製品、電化產品(個人電腦、一般事務性機器、測量機器、一般家電等)
之使用設定,因此不建議使用在偶發之故障或錯誤動作將可能造成人體危害或致命傷害危險性之
用途(如:原子力控制機器、航空宇宙控制機器、運輸控制機器、醫療機器及各種安全裝置等),
若產品使用於以上機器或裝置,本公司不負保證責任。
6、 此交貨規格書說明承認產品之規格、使用、內容等各項資訊,惟對於任何第三人之智慧財產權,
不負使用承諾及內容保證之責。
7、 本產品不得使用在與國內外法令、規則及命令禁止使用及販賣的產品上。
8、 對於因購買、使用或無法操作本產品所造成之損害、費用或財產、利潤喪失及其他不論偶發的、
必然的損害本公司不負責任。本公司的保證,僅限於對該產品的修理及退換服務或退款。
Note:
1. Please sign-off or stamp with company-seal on the Delivery Specification and return
the original copy back to PQI.
2. To change Delivery Specification contents or descriptions must be negotiated with PQI in
advance. Any changes made will be result in the issuing of a revised version to be signed-off
or stamp with company-seal.
3. Products that are not in agreement of prior conditions or purposes, please notify your PQI
contact window in advance.
4. PQI strives to provide quality products and excellent reliability but nevertheless, malfunction
is a nature of semi-conductor. Therefore, in addition to product quality, all designs are aimed to
provide protection from causing personal harm, fire, endangering the public, etc.
5. This is a general semi-conductor / electronic product (personal computer, general purpose
stationary goods, quantitative machine, general household electronics, etc.). Therefore, its
intended purposes is not for use when it is damaged or incorrectly operated (human error)
which may result in bodily harm (eg. intended use not for medical equipments, nuclear, aviation
and transportation controllers). PQI shall not be held liable if the product is used coincide with
machineries described not for intended use.
6. The “Delivery Notice” states product specifications, instruction manual, etc. PQI does not
guarantee the violation of third party intellectual property rights.
7. This product is not to be use or sold in overseas countries where legislations states such
products may be banned or restricted.
PQI shall not be held liable for any damages, expenses, loss of profit as a result from the purchase,
use or incorrect operation, whether it may be accidental or consequential. PQI’s guarantee only
extends to the repair, exchange or refund of the purchased product.
DSC10007
Rev. A.1
July. 2010
CompactFlash Card
CompactFlash Card
6ACX-XXXXXRXXX
DSC10007
Rev. A.1
July. 2010
CompactFlash Card
General Description:
6ACX-XXXXX is CompactFlash™ based on flash memory controller technology. This card complies with
CompactFlash™ specification; it is suitable for the usage of data storage memory for PC or other electric equipment
and digital still camera. This card is equipped with NAND flash memory. By using this card it is possible to operate
stability for the system that have CompactFlash™ slots.
Features:
1. True IDE Mode supports:
Ultra DMA Modes: 0, 1, 2, 3, 4, and 5
PIO Modes: 0, 1, 2, 3, 4, 5, and 6
Multi-Word DMA Modes 0, 1, 2, 3 and 4
2. High reliability based on the internal 13/24-bits ECC function
3. Variations of access mode:
Memory Card Mode
I/O Card Mode
True-IDE Mode
Capacities:
ltem
Capacities
CompactFlash
2G , 4G , 8G , 16G , 32G ,
64G
CompactFlash Dimensions:
ltem
Length
Width
Height
CompactFlash (Type 1)
36.4 mm
42.8 mm
3.3 mm
Physical outline:
Rev. A.0
1/2
Juen. 2009
CompactFlash Card
Speed Type: 150X , 233X , 300X ,
Power Supply: 3.3V or 5V
Reliability: MTBF:3,000,000 Hours
Environment:
(1) Shock:
Operating
:1,000G Max
(2) Relative Humidity(non-condensing): 8% ~ 95%
(3) Temperature:
Operation Temperature range: 0 to 70 ℃
Storage Temperature range: -40 to 85 ℃
Compliance:
(1) Fully Compliant with RoHS directive
(2) CE and FCC compatibility
Rev. A.0
2/2
Juen. 2009
Download PDF

advertising