OFDM-PAL/SECAM receiver with ASI output

OFDM-PAL/SECAM receiver with ASI output
Channel processing equipment
Compact modular headend CMH3000
OFDM-PAL/SECAM receiver with ASI output
DVB-T receiver of MPEG2 coded programs
with video, audio and DVB-ASI outputs.

MPEG2 decoder 4:2:0 quality rate
input signal level measurement
BER monitor
teletext reinsertion

built-in CA interface

BISS mode decoder*
software/hardware watchdog timer
self dianostics and non-volatile event log

built-in video test generator
connectors:
CI port - PCMCIA
ASI output - BNC
video/audio, output - 15 pins Sub-D socket
Technical specifications
T Y P E
rt112
Ordering number
RF input
frequency range
level/impedance minimal S/N ratio
Channel bandwidth
Video output frequency range
level/impedance
video mode
Audio output
frequency range
level
02826
pr.
174-230 MHz, 470-862 MHz
30-88 dBµV/75 Ω**
19 dB*
pr.
7 MHz/8 MHz
20 Hz - 6 MHz
1 V/75 Ω
pr.
PAL/SECAM
20 Hz - 15 kHz
775 mV related to 10 kΩ
adjusting range
pr.
± 6 dB
audio mode
pr.
L&R/L/R/mute
ASI output
bit rate
impedance
up to 80 Mbps
75 Ω
packet length
Video test pr.
ON/OFF
Current consumption***
Dimensions/Weight (packed)
*
decoded program presents only on V/A output
** QEF receiving with test signal 8k, QAM64, 1/4 GI, 2/3 FEC
*** without LNB and CAM powering
pr. software control
188 bytes
0.3 A
54x265x160 mm/1.5 kg
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising