Page 1 Page 2 CATALOG 4. SINGLE CHANNEL RECEIVER

Page 1 Page 2 CATALOG 4. SINGLE CHANNEL RECEIVER
SERIES
PREMIER
MICROPHONE > PYLE
«>»
SYSTEM <
URF
PLL
| В
PDWM1902 PDWM3375
PDWM1904 PDWM3400
PYLE
www.pyleaudio.com www. pyleaudio.com
CATALOG
2. SYST EM | EAT A a ay ay”
4. SINGLE CHANNEL RECEIVER FEATURES ua a e As
о. DUAL CHANNEL RECEIVER FEATURES... ....ccimmnsmssmossonsismmonsussnsssansusossonsunsssmnsnnns
6. HAND-HELD TRANSMITTER FUNCTION 6 FEATURES.........................eeeeeeemeeono.
7. BODY-PACK TRANSMITTER FUNCTION 8 FEATURES..................eereneccerennecrennos
ara e ONE UN e AAN a
9. TRANSMITTER CONNECTION eek on ooo ti
10. RECEIVER OPERATING INSTRUCTION................eeemnrecrerecrerenreneer ener ane
11. TRANSMITTER OPERATING INSTRUC HON. naan
Thank you for purchasing the Premier Series Wireless Microphone
System. Please read the instructions carefully to ensure proper use and opera-
tion of the product. Also, keep the instructions for future reference.
This professional wireless microphone system uses a super steady
PPL-synthesized control technic and operates on high-efficiency,
low-consumption discharging techniques. Performance features include
independent developed mobile frequency compression, expander circuitry,
image frequency limiting circuits, a multiple checked silent and noise-free
circuits, antenna diversity receiving circuit & switch impact noise defeat circuits.
Resist reverberation circuit and changed output control. Passes Q.C. code
standards.
5. Battery Nl AA RE ee Pas
De
SYSTEM COMPOSITION
Ey nn os eS a Ss ssi]
2. Wireless hand-held or body-pack microphone............ ATK
SO CDE emo a E Nor ere ms SE ANT
4. AC power adapter of special receiver..............-.. e ——-=-.— ==... ...e.e.e=. reee. ni
iia dul A
.X1
FOREWORD
Your new series of wireless system is designed to give you the best of both sound
reinforcement worlds:the freedom of wireless system, and the excellent quality. This
manual covers each of the series system: The Vocal Artist-UHF, The Presenter-UFH,The
Headset-UHF.
SYSTEM FEATURE
1. PLL-Synthesized control technic, 8selectable UHF channels.
2. The UHF frequency range is 673-697.975 MHz, avoiding the frequency interruption.
3. LED information display.
4. Double noise squelch operation circuit and system will be higher efficient and much
more steady.
5. Use the dynamic type and Uni-directional cartridge, clear to show the sound.
. High efficient and low consumption design.
7. Use the high extension antennas, the operating distance will reach 50m.
an
SYSTEM TYPE
The Vocal Artist-UHF is a hand-held system designed for singers who desire the high
quality microphones and the freedom of wireless performance.
The Presenter-UHF is a body-pack system designed for public speakers who prefer
an inconspicuous, hands-free lavalier microphone.
The Headset-UHF is a body-pack system designed for users in physically active
applications, who desire the freedom of hand-free microphone.
SINGLE CHANNEL RECEIVER FEATURES
10.
11.
Power Button: Power ON/OFF the receiver.
Power Indicator: Indicate the power ON/OFF.
Channel Display: Indicates the frequency data of the selected channel
group.
SET Function Button: Sets channel data.
"AF"Audio Level Indicator: Indicate the wireless system audio signal level.
"RF" signal Indicator:It glows when the Receiver receive RF signal from
Transmitter.
Antenna.
Volume Knob: Adjust the volume output of receiver.
XLR Balanced Output Jack: Connect the audio cable from this jack to
the input port of amplifier, mixer.
1/4" Audio Output Jack: Connect the audio cable from this jack to the
input port of amplifier, mixer.
Power Jack: Connect the AC/DC adapter to receiver.
DUAL CHANNEL RECEIVER FEATURES
1. Power Button: Power ON/OFF the receiver.
2. Power Indicator: Indicate the power ON/OFF.
3. Channel Display: Indicates the frequency data of the selected channel
group.
4. SET Function Button: Sets channel data.
5. "AF"Audio Level Indicator: Indicate the wireless system audio signal level.
6. "RF" signal Indicator:it glows when the Receiver receive RF signal from
Transmitter.
7. Antenna.
8. Volume Knob: Adjust the volume output of receiver.
9. XLR Balanced Output Jack: Connect the audio cable from this jack to
the input port of amplifier, mixer.
10. 1/4" Audio Output Jack: Connect the audio cable from this jack to the
input port of amplifier, mixer.
11. Power Jack: Connect the AC/DC adapter to receiver.
TRANSMITTER FUNCTION & FEATURES
i
1. Grille: Protects the cartridge and help reducing the breath sounds and wind
noise.
2. Channel Display: Indicates the frequency data of the selected channel
group.
3.Down Function Button: Sets channel data.
4.Up Function Button: Sets channel data.
5.Power and Audio Mute Switch.
6.Battery Cover: Openitto install the battery.
кк
® 0 © |
=
j— SP
—
—_ ol
|
[x
1. Power and Audio Mute Switch.
2. Antenna: Transmit the RF signal of transmitter.
3. Belt Clip: Attach the transmitter to the belt.
4. Audio Input Jack: it is suitable for lavalier system/headset system.
5. Channel Display: Indicates the frequency data of the selected channel
group.
6. Gain Adjusting Volume: Adjust the transmitter audio input gain.
7.State Setting Switch: Set the using state of lavalier system(L)/headset
system(H).
8.Up Function Button: Sets channel data.
9.Down Function Button: Sets channel data.
RECEIVER CONNECTIONS
1. Receiver Power Connection: Connect the AC adapter into the DC power connector
on the back of the receiver. Plug the AC adapter into a AC 120V/220V 50Hz outlet.
2. Antenna: Keep the position of antenna at a 45 angle from vertical, .(5hown
as below)
3. Audio Connection: Connect the audio cable from the audio output on the receiver
to the input on your amplifier equipment.
BODYPACK TRANSMITTER CONNECTION
1. Lavalier Microphone Connection: Connecttheconnecterofsupplied
Lavalier microphone to the connecting jack of transmitter (Shown as below)
Set the transmitter work state in wireless lavalier system.
2. Headset Microphone Connection: Connectthe connecterofsupplied
Headset microphone to the connecting jack of transmitter(Shown as below)
TRANSMITTER BATTERY INSTALLATION
1. Battery Installation of Transmitter: Push open the battery cover, Insert the
supplied batteries into battery jar in polarity and cover the battery Cover.
MATCHING WIRELESS FREQUENCY
(RECEIVER / TRANSMITTER CONNECTION):
1. Press and hold the “SET” button on the receiver --- thenrelease the button
once the receiver display begins to flash.
2. When itis flashing, continue to press the “SET” button again to select the
desired channel, the selected channel will save automatically without any action
for 5 seconds.
3. Power on your microphone/transmitter, press and holdthe “UP” and “DOWN”
arrow keys once the CH number on display begins toflash.
4. When itis flashing, press “UP” and “DOWN” arrow keys toselect the same
channel as chosen on receiver, then, the selected channel will save automatically
without any action for5 seconds.
5. Repeat steps 1-4 to connect an additional microphone / transmitter (For models
PDWM3375, PDWM3400)
TROUBLESHOOTING
PROBLEM INDICATOR STATUS SOLUTION
Slide transmitter POWER OMMOFF swilch to ON
cid Red transmitier position. Make sure battery Is inserted property,
indicates bs nat fnsh observing battery ["+/-"). If battery is inserted
properly, replace with fresh battery
Fed transmitter ; ; :
No sound Indicaler ls Nach Slide transmitter MUTE/ON switch to ON position
Make sure ac adapter is securely plugged into
No sound. Red receiver POWER light off. | outlet and into dc input connecto
electrica г.
Make sure ac electrical outlet works and supplies
proper voltage.
Receiver signal Indicators
Tum up receiver volume control.
Mo sound. Confirm that the output connections from the
AJB lights glowing. receiver to the external equipment are secure
Receiver signal Nir das Confim transmitter's and receiver'sfrequencies
lights off. Transmitter and
NOAA ver POWER lights | "=
de gs Move transmitter closer to receiver
glowing
Sound level differs from level Receiver signal Indicators Adjust transmitter gain level to compessary.
of a cabled instrument.
AJB lights glowing.
Adjust receiver volume as necessary.
Sound level differs with
differant guitars.
Receiver signal indicators A/B
lights glowing.
Readjust transmitter gain level to compensate for
differences in guitar outputs
Distortion level increases
gradually
Receiver Signal Indicators
AJB lights and transmitter
LOW BATTERY light glowing
Replace transmitter battery
Bursts of noise or other
audibleradio signals present.
Signal Indicators A/B lights on
Identify potential sources of interference (other RF-
sources) and tum off, remove or use a wireless
system operating on a different frequency.
Momentary loss of sound as
Receiver signal Indicators A/B
Repositeon receiver and perform walk-through test
transmitter is moved around lights off when sound is lost again. If audio dropouts persist, mark "dead® spots
performing area. and avoid them during performance
SYSTEM SPECIFICATIONS
RF Carrier Frequency Range: Approximately 673to697.975MHZ (Available
frequencies depend on applicable regulations in country where system is used).
Operating Range: 50 m(approximately 1 64ft)under typical conditions
Audio Frequency Response: 100 to 18,000Hz,+3dB
THD: <1%
Mobile stste Range:> 100dB
Operating Temperature Range
-29” to 74 °C (-20°to 165°F)NOTE:Battery characteristics may limit this
range.
PDWM1902
Premier Series Professional UHF Wireless Handheld Microphone System
with Selectable Frequencies
LED Power Indicator & Channel Display
Operation Range: Up to 164 ft.
Audio Level Indicator for wireless system audio signal level
Includes one handheld wireless dynamic microphone
RF Signal Indicator for transmitter signal strength
UHF Signal for wider range and less obstruction
SET function for channel selection
8 separate channels to choose from
Adjustable volume control
1/4" audio output jack
XLR balanced output jack
AC/DC adapter power jack
Power Supply: 110/220V
Receiver Specifications
RF Frequency Range: 673-697.975 MHz
Image & Spurious Rejection: >70 dB
Receiving Sensitivity: -105 dB
Signal / Noise Ratio: -105dB
Border Upon Channel Rejection: > 70 dB
THD.:<1%
Audio Output Level: 0-300 mV
Power Requirements: 13-15V DC nominal 300 mA
Dimensions 6.8 x 5.3 x 1.7 in
Handheld Transmitter Specifications
Displays channel and selection data
RF Frequency Range: 673-697.975 MHz
RF Output: =10 dBm
Modulation Type: FM
Max Deviation: + 40 KHz
Spurious Emission: > 55 dBc
Nominal Current Drain: < 40mA
Power Requirements: 2 x 1.5V AA
Dimensions: 9.25x1.9x1.9in
The Pyle PREMIER Series Wireless Microphone System will provide you with the
performance you've been looking for. Whether used for work or play, this cordless
microphone system is easy to setup, easy to use, and best of all, will give you an
amazing high-quality audio experience. Choose from 8 different channels to tran
smit over. Enjoy hassle-free and reliable wireless sound transmission with today's
latest system technology with this all-in-one package. Excellent sound production
for vocals or speech and perfect for just about any event on stage, in the office or
even at home. Comes with everything you need to perform. No matter what you use
it for, the Pyle PREMIER Series Wireless Microphone System will take your sound
and style to the next level.
PDWM1904
Premier Series Professional UHF Microphone System with Body-Pack
Transmitters, Headset & Lavalier Microphones with Selectable Frequencies
LED Power Indicator & Channel Display
Operation Range: Up to 164 ft.
Audio Level Indicator for wireless system audio signal level
Includes one handheld wireless dynamic microphone
RF Signal Indicator for transmitter signal strength
UHF Signal for wider range and less obstruction
SET function for channel selection
8 separate channels to choose from
Adjustable volume control
1/4" audio output jack
XLR balanced output jack
AC/DC adapter power jack
Power Supply: 110/220V
Receiver Specifications
RF Frequency Range: 673-697.975 MHz
Image & Spurious Rejection: >70 dB
Receiving Sensitivity: -105 dB
Signal / Noise Ratio: -105dB
Border Upon Channel Rejection: > 70 dB
THD.:<1%
Audio Output Level: 0-300 mV
Power Requirements: 13-15V DC nominal 300 mA
Dimensions 6.8 x 5.3 x 1.7 in
Body-Pack Transmitter Specifications
Includes wireless body-pack transmitters, headsets & lavaliers
RF Frequency Range: 673-697.975 MHz
RF Output: >10 dBm
Modulation Type: FM
Max Deviation: +40 KHz
Spurious Emission: > 55 dBc
Nominal Current Drain: < 40mA
Power Requirements: 2 x 1.5V AA
Dimensions: 9.25x1.9x1.9in
The Pyle PREMIER Series Wireless Microphone System will provide you with the
performance you've been looking for. Whether used for work or play, this cordless
microphone system is easy to setup, easy to use, and best of all, will give you an
amazing high-quality audio experience. Choose from 8 different channels to tran
smit over. Enjoy hassle-free and reliable wireless sound transmission with today's
latest system technology with this all-in-one package. Excellent sound production
for vocals or speech and perfect for just about any event on stage, in the office or
even at home. Comes with everything you need to perform. No matter what you use
it for, the Pyle PREMIER Series Wireless Microphone System will take your sound
and style to the next level.
10
PDWM3375
Premier Series Professional 2-Channel UHF Wireless Handheld Microphone System
with Selectable Frequencies
LED Power Indicator Channel Display
Operation Range: Up to 164 ft.
Audio Level Indicator for wireless system audio signal level
RF Signal Indicator for transmitter signal strength
Independent & adjustable channel volume controls
UHF Signal for wider range and less obstruction
Up to eight separate channels to choose from
1/4" audio output jack
XLR balanced output jack
AC/DC adapter power jack
Power Supply: 110/220V
Receiver Specifications
RF Frequency Range: 673-697.975 MHz
Image & Spurious Rejection: >70 dB
Receiving Sensitivity: -105 dB
Signal / Noise Ratio: -105dB
Border Upon Channel Rejection: > 70 dB
T.H.D.:<1%
Audio Output Level: 0-300 mV
Power Requirements: 13-15V DC nominal 500 mA+
Dimensions 6.8 x 5.3 x 1.7 in
Handheld Transmitter Specifications
Includes (2) wireless Dynamic microphones
RF Frequency Range: 673-697.975 MHz
RF Output: >10 dBm
Modulation Type: FM
Max Deviation: + 40 KHz
Spurious Emission: > 55 dBc
Nominal Current Drain: < 40mA
Power Requirements: 2 x 1.5V AA
Dimensions: 9.25 x 1.9 x 1.9 in
The Pyle PREMIER Series 2-Channel Wireless Microphone System will provide you with
the performance you've been looking for. Whether used for work or play, this dual cordless
microphone system is easy to setup, easy to use, and best of all, will give you an amazing
high-quality audio experience. Choose from 8 different channels to transmit over. Enjoy
hassle-free and reliable wireless sound transmission with today's latest system technology
with this all-in-one package. Excellent sound production for vocals or speech and perfect
for just about any event on stage, in the office or even at home. Comes with everything you
need to perform including 2 wireless handheld transmitter microphones. No matter what
you use it for, the Pyle PREMIER Series 2-Channel Wireless Microphone System will take
your sound and style to the next level.
11
PDWM3400
Premier Series Professional UHF Microphone System with (2) Body-Pack
Transmitters, (2) Headset & (2) Lavalier Microphones with Selectable
Frequencies
LED Power Indicator & Channel Display
Operation Range: Up to 164 ft.
Audio Level Indicator for wireless system audio signal level
Includes two handheld wireless dynamic microphones
Independent & adjustable channel volume controls
RF Signal Indicator for transmitter signal strength
UHF Signal for wider range and less obstruction
Up to eight separate channels to choose from
1/4" audio output jack
XLR balanced output jack
AC/DC adapter power jack
Power Supply: 110/220V
Receiver Specifications
RF Frequency Range: 673-697.975 MHz
Image & Spurious Rejection: >70 dB
Receiving Sensitivity: -105 dB
Signal / Noise Ratio: -105dB
Border Upon Channel Rejection: > 70 dB
T.H.D.: < 1%
Audio Qutput Level: 0-300 mV
Power Requirements: 13-15V DC nominal 500 mA+
Dimensions 6.8 x 5.3 x 1.7 in
Body-Pack Transmitter Specifications
Includes (2) wireless body-pack transmitters, headsets & lavaliers
RF Frequency Range: 673-697.975 MHz
RF Output: >10 dBm
Modulation Type: FM
Max Deviation: +40 KHz
Spurious Emission: = 55 dBc
Nominal Current Drain: < 40mA
Power Requirements: 2 x 1.5V AA
Dimensions: 9.25x1.9x1.9in
The Pyle PREMIER Series Wireless Microphone System will provide you with
the performance you've been looking for. System comes with 2 body-pack
transmitters, 2 headset & 2 lavalier microphones. Whether used for work or play,
this microphone system is easy to setup, easy to use, and best of all, will give
you an amazing high-quality audio experience. Choose from 8 different channels
to transmit over. Enjoy hassle-free and reliable wireless sound transmission with
today's latest system technology with this all-in-one package. Excellent sound
production for vocals or speech and perfect for just about any event on stage, in
the office or even at home. Comes with everything you need to perform. No matter
what you use it for, the Pyle PREMIER Series Wireless Microphone System will
take your sound and style to the next level.
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement