Machines for Natural Turf

Machines for Natural Turf
Machines for Natural Turf
1
Introduction
contents
Redexim develops and manufactures
References
3
Aeration
4-21
machines for the maintenance of the
turf at golfcourses, sportsfields, public
areas and horse race tracks. It started
for the company in 1978 with the
invention of the Verti-Drain deep
tine aeration machine, which was
revolutionary at that time.
Over time Redexim developed into
a company manufacturing a wide
range of specialized machines for
the maintenance of the turf, such as
overseeders, topdressers, sweepers,
scarifiers, brushes and of course
aerators. Furthermore, Redexim has
been producing machines for sports
fields made of artificial turf for a few
years now.
Redexim has a distribution network
over more than 100 countries, and has
its own offices in Australia, China,
page
Verti-Drain aerators
4-16
Vertical aerators
17-18
Linear aerators
19-21
QuakeMeter
21
Topdressing
Brush spreaders
22-27
22-24
Selfloading + Drum spreader 25
Disc spreaders
Sweeping + Verticutting
26-27
30-32
Turf-Tidy
30-31
Verti-Rake
31
Verticutters
32
Seeding + Overseeding
28-29
Spiked seeders
28
Disc seeders
29
the UK and the USA, aside from its
headquarters in the Netherlands.
Brushing
Brushes (several)
33-34
Dragmat
34
Renovation
The Verti-Drain in the early ninety-eighties
2
33-34
35-36
Vibra Sandmaster
35
Stone Burier
35
Turf-Stripper
36
Redexim machines are being used at the world’s most important venues:
Golf Courses
“I purchased the Verti-Drain about
3 years ago to replace an older model
which had provided good results
and reliability for over 10 years. As I
write this, the Verti-Drain is out on
the course aerating greens and tees as
part of the course preparations for the
2008 British Open Championship.”
Chris Whittle, Course Manager
Royal Birkdale Golf Club - UK
“In addition to hosting this year’s PGA
Championship, Oakland Hills CC
South Course also receives about 30.000
rounds of golf annually. The stress
we experience on our fairways from
this level of traffic has been reduced
because of the use of the Verti-Drain.
Our fairway turf has improved and the
disruption to our members is minimal.”
Steve Cook, CGCS.
Oakland Hills CC - USA
“Some members call me “Punch” and
my crew thinks that “my cure all” is
aerification. Adding oxygen to our soil
is one of the most important practices
we do as Turf Managers.
The Verti-Drain Aerifier is helping
Valhalla Golf Club prepare for the
Ryder Cup.”
Mark Wilson, CGCS.
Valhalla Country Club - USA
Sportsfields
European
Championships
Football
AustriaSwitzerland
2008:
Verti-Drain
Mustang at
work on the day
of the final Spain
- Germany*
* From Die Presse.
3
Shatter Tining
The use of the Verti-Drain as a cultivation
method to aerate soils is also known as
deep shatter tining. The Verti-Drain drives
solid tines into the grass and through the
ground up to 400mm (16”) deep, piercing
any pan which may exist. The tines then
heave the soil, cracking up the compaction
before they are withdrawn.
It breaks the side walls and adds pore space
to the soil profile.
Compaction is relieved and the soil is
opening, allowing water to drain and air to
move freely.
This heaving action lifts the soil in a
uniform manner. This lift represents the
amount of air that has been incorporated
into the ground.
The Art of the
Verti-Drain
Needle Tines
Extra fine Needle tines ensure minimal surface damage.
Ø8mm needle tines
4
Ø5mm needle tines
The tine angle lever allows easy adjustment
to the degree of ground shatter intensity,
and quick setting to the vertical position for
conventional coring.
Aeration
Hollow Coring
The Verti-Drain tines penetrate vertically when
the tine angle lever is positioned at 90˚. Perfectly
straight cores are being pulled on the surface.
Hollow coring is ideal for exchanging the soil,
or for removing thatch.
Cross Tines +
Chisel Tines
Cross Tines ensure an extra intensive aeration
treatment, while Chisel Tines will create more
space in the soil for oxygen.
Cross Tines
Chisel Tines
5
Aeration
Verti-Drain - selfpropelled series
The selfpropelled Verti-Drains contain their own engine and easy manoeuvring in tight areas is possible
Model
1513+Carrier
7007Mechanical
7007Hydro
Operation
Weight
Working width
Working depth max
Engine
Capacity at 55mm
(2 1/8”) forward hole pattern
Walk-in-front
950kg (430kg+520kg) (2090lbs)
1320mm (52”)
150mm (6”)
32hp
Walk-in-front+sit-on
520kg (1144lbs)
675mm (27”)
150mm (6”)
13hp
sit-on
745kg (1639lbs)
680mm (27”)
150mm (6”)
18hp
2388m2/h (25790sq.ft/h)
1060m2/h (11448sq.ft/h)
1114m2/h (12031sq.ft/h)
Optional
Solid tines from 5mmx125mm (3/16”x5”) to 12mmx150mm (1/2”x6”)
Hollow tines from 10mmx125mm (3/8”x5”)
Rear roller / Turf hold down fingers / Core Collector
Carrier only: Verti-Drain can be disconnected and connected to tractor.
Carrier +
Verti-Drain 1513
The Verti-Drain 1513 connected
to a Carrier functions as a
selfpropelled aerator. It is a high
production aerator, penetrating up
to 150mm deep into the soil with
both solid tines and hollow coring
tines.
Ground pressure is limited to a
minimum, since most of the weight
of the Verti-Drain 1513 and the
Carrier is carried and absorbed by
its wide tyres and the smooth front
roller of the Verti-Drain. Therefor
the ground pressure per square
centimeter amounts only 0.45kg.
Combination
Options
The Verti-Drain 1513 can be
decoupled from the Carrier,
and be hooked on a tractor,
while other tools can be
connected to the Carrier.
Carrier + Speed-Seed 1200
6
Carrier +
Verti-Cut 1200
Verti-Drain 1513
+ tractor
Verti-Drain 7007 Mechanical
The selfpropelled
Verti-Drain 7007
can be used either
as a sit-on aerator,
or as a walk-in-front
unit. This highly
manoeuvrable VertiDrain can quickly
and easily treat hard
to reach areas.
The 7007 can be equipped with solid (l) and hollow tines (r)
Verti-Drain 7007 Hydro
The sit-on 7007Hydro Verti-Drain is
hydrostatic driven, so that all speed
adjustments are simply done by means
of a foot pedal. The three wheeled
machine is highly manoeuvrable and has
a maximum speed of 5km/h (6.5mph).
A rear roller
smoothens
the turf surface
7
Aeration
Verti-Drain - conventional series
These Verti-Drains are the choice of championship courses and sportfields around the world, as the tines have a large
penetration depth, while they can work with relatively small tractors.
Model
7212
7215
7316
Weight:
Working width
Working depth max.
Capacity at 65mm (2 ½”)
forward hole pattern
Capacity at 165mm (6 ½”)
forward hole pattern
Tractor required
470kg (1034lbs)
1.2m (47”)
variable to 250mm (10”) max
550kg (1210lbs)
1.56m (61”)
variable to 250mm (10”) max
670kg (1474lbs)
1.6m (63”)
variable to 300mm (12”) max
1200m2/h (12960sq.ft/h)
1870m2/h (20196sq.ft/h)
1400m2/h (15120sq.ft/h)
3000m2/h (32400sq.ft/h)
17hp, lift cap 568kg (1250lbs)
4680m2/h (50544sq.ft/h)
23hp, lift cap 700kg (1540lbs)
3640m2/h (39312sq.ft/h)
27hp, lift cap 825kg (1815lbs)
Standard items
Solid tines 12mmx250mm (1/2”x10”), front & rear rollers with scrapers, PTO with slip clutch, storage stand,
central quick adjustment lever, tool box with tools.
Optional items
Multi tine heads
Solid tines: from Ø5mm to Ø18mm
Hollow tines: from Ø10mm x 125mm (3/8”x5”) to 24mm x 250mm (1”x10”)
Cross Tines/ Core collector/ Turf hold down fingers/ Rotating brush
Verti-Drain 7212
The popular Verti-Drain 7212 is ideal for use on greens and most
sports turf surfaces where limited access or tractor horsepower is
available.
8
Verti-Drain 7215
The Verti-Drain 7215 is
a lightweight Verti-Drain
model, fitting tractors
of 25hp. It contains
a multiple amount of
arms and tineholders
(8) ensuring increased
stability.
Verti-Drain 7316
The Verti-Drain 7316 is a very
effective machine for use on
sportfields and all areas of the
golf course. With a penetration
depth up to 300mm(12”) it will
aerate up to 4,200m2/h (45,360
sq ft/hr) on fairways.
Ø 5mm (1/6”) mini needle tines on
multi tine adapters
9
Verti-Drain - fast series
These high speed Verti-Drains are fast aerators, running at speeds of up to 4.3km/h (2.75mph). The new model 1513 can be
connected to the Redexim Carrier as well (see page 6).
Models
7110
1513
7113 Mustang
7117 Mustang
7120
Working width
Weight
Working depth max
Capacity at 55mm (2 ½”)
forward hole pattern
Capacity at 125mm (5”)
forward hole pattern
Tractor required
1.0m (39”)
340kg (748lbs)
150mm (6”)
1.3m (51”)
430kg (946lbs)
150mm (6”)
1.34m (53”)
520kg (1144lbs)
150mm (6”)
1.7m (67”)
575kg (1265lbs)
150mm (6”)
2.0m (79”)
915kg (2013lbs)
200mm (8”)
2040m2/h (22032sq.ft/h)
3320m2/h (35856sq.ft/h)
2650m2/h (28620sq.ft/h)
3400m2/h (36720sq.ft/h)
3215m2/h (34722sq.ft/h)
4380m2/h (47304sq.ft/h)
7120m2/h (76896sq.ft/h)
5690m2/h (61452sq.ft/h)
13hp, lift cap 410kg (902lbs)
20hp, lift cap 500kg (1100lbs)
23hp, lift cap 650kg (1430lbs)
7300m2/h (78840sq.ft/h)
25hp, lift cap 700kg (1540lbs)
7500m2/h (81000sq.ft/h)
45hp, lift cap 1000kg (2200lbs)
Standard items
Solid tines 1 set, front + rear rollers with scrapers (7110 + 1513 rear roller optional)
PTO with slip clutch, storage stand, central quick adjustment lever, toolbox with tools.
Optional items
Solid tines from 5mmx125mm (3/16”x 5”) to 12mm x 150mm (1/2”x 6”)
Hollow tines from 10mm x 125mm (3/8”x 5”) to 18mm x 150mm (3/4”x 6”)
Turf hold down fingers / Windrow kit / Rear roller (Rear roller standard for 7113, 7117 + 7120)
Verti-Drain 7110
The model
7110 is an
economically
priced
Verti-Drain
fitting low
hp compact
tractors.
Verti-Drain 1513
The rapid new model 1513 can be connected to a
tractor as well as to the Redexim Carrier (see page 6).
10
Aeration
Verti-Drain 7113 Mustang
The Verti-Drain
7113 contains a
3-speed gearbox
and has a working
width of 1.3m
Verti-Drain 7117 Mustang
The Verti-Drain 7117 has the same features as the
7113 model, but with a working width of 1.7m
Verti-Drain
7120
The fast Verti-Drain 7120
aerates compacted soils at
depths up to 200mm. With
its large working width
of 2.0m, it is aimed at
professionals managing large
open spaces.
Topdressing prior to
Verti-Drain
After the turf is topdressed with sand, the VertiDrain works the sand into the soil with solid tines.
Set at an ideal shatter angle of 5-10 degrees and a
close hole spacing, the tines then shatter the sand
backwards through the soil profile thus thoroughly
mixing it into the soil structure.
11
Aeration
Verti-Drain Concorde - fast + heavy series
The new Verti-Drain Concorde is able to work at high speed in hard soils, and can take solid tines with a diameter of up to
24mm(1”).
Models Concorde
2216
2220
Working width
Weight
Working depth max.
Capacity at 65mm (2 ½”) forward hole pattern
Capacity at 130mm (5 ½”) forward hole pattern
Tractor required
1.6m (63”)
840kg (1848lbs)
up to 225mm (9”)
2796m2/h (30196sq.ft/h)
5592m2/h (60394sq.ft/h)
45hp, lift cap 1050kg (2310lbs)
2.08m (82”)
1030kg (2266lbs)
up to 225mm (9”)
3728m2/h (40262sq.ft/h)
7456m2/h (80525sq.ft/h)
50hp, lift cap 1300kg (2860lbs)
Standard items
Solid tines Ø18x225mm
Adapters for tines with Ø24mm to Ø18mm
Verti-Drain 2216 Concorde
This tough model is designed for indulated areas
Depth adjustments of the tines are done
hydraulically from the tractor seat
Verti-Drain
2220 Concorde
For large, compacted
areas this Concorde
with a working width of
2.08m is ideal.
12
Verti-Drain - heavy series
The heavy series of Verti-Drain are designed to aerate soils up to a full 400mm (16”) deep, and four different models are
available with a three-speed gearbox that will match up to any tractor.
Models
7416
7516
7521
7526
Working width
Weight
Working depth max.
Capacity at 65mm (2 ½”)
forward hole pattern
Capacity at 195mm (…”)
forward hole pattern
Tractor required
1.6m (63”)
870kg (1914lbs)
up to 350mm (14”)
1.6m (63”)
1128kg (2482lbs)
up to 400mm (16”)
2.1m (83”)
1375kg (3025lbs)
up to 400mm (16”)
2.6m (102”)
1595kg (3509lbs)
up to 400mm (16”)
1360m2/h (14688sq.ft/h)
1120m2/h (12096sq.ft/h)
1470m2/h (15876sq.ft/h)
1820m2/h (19656sq.ft/h)
4200m2/h (45360sq.ft/h)
35hp, lift cap 1050kg (2310lbs)
3360m2/h (36288sq.ft/h)
4410m2/h (47628sq.ft/h)
5460m2/h (58968sq.ft/h)
45hp, lift cap 1350kg (2970lbs) 55hp, lift cap 1650kg (3630lbs) 65hp, lift cap 1900kg (4180lbs)
Standard items
Solid tines Ø18x300mm with adapter
Front & Rear roller
3-speed shuttle gearbox
Toolbox with tools
PTO with slip clutch
Storage stand integrated in machine
Solid tines Ø18x300mm (7521)
Solid tines Ø24x400mm (7526)
Front & Rear roller
3-speed shuttle gearbox
Toolbox with tools
PTO with slip clutch
Storage stand integrated in machine
Verti-Drain 7416
The Verti-Drain
7416 is light
enough for
application on
golf greens, and
strong enough
for hard soils.
It penetrates
the soil up to
350mm (14”)
Verti-Drain 7516
Verti-Drain model 7516 is a heavier model,
penetrating up to 400mm (16”) deep and is
designed for hard areas.
Less tractor
horsepower is needed
when the bogy wheel
system is added.
13
Aeration
Verti-Drain 7521
This unit with a 2.1m working width is widely
used by contractors and by golf clubs on
fairways.
Verti-Drain 7526
The Verti-Drain 7526
comes into its own in large
open spaces which includes
relatively flat fairways,
horse race tracks and large
sportfields.
14
Verti-Drain - extra heavy series
The heavy 76-series weighs considerably more than the 75-series, containing a heavier gearbox, PTO and rear roller support
and are the best choice when soils are really hard.
Models available
7621
7626
Working width
Weight
Working depth max.
Capacity at 65mm (2 ½”) forward hole pattern
Capacity at 195mm (8”) forward hole pattern
Tractor required
2.1m (83”)
1565kg (3443lbs)
400mm (16”)
1620m2/h (17496sq.ft/h)
4850m2/h (52380sq.ft/h)
55hp, lift cap 2000kg (4400lbs)
2.6m (102”)
1930kg (4246lbs)
400mm (16”)
2000m2/h (21600sq.ft/h)
6010m2/h (64908sq.ft/h)
65hp, lift cap 2300kg (5060lbs)
Standard items
Solid tines Ø24x400mm (1”x16”) / Front & Rear roller / 3-speed shuttle gearbox / Toolbox with tools /
PTO with slip clutch / Storage stand integrated in machine
Optional items
Multi tine heads: 8 (7621) 10 (7626) units / Solid tines: from Ø8mm to Ø24mm
Hollow tines: from Ø10x125mm to Ø32x300mm / Bogy wheel kit
Verti-Drain 7621
The 7621 has a 2.1m working width, requiring
a tractor of at least 55hp with a lift capacity of
2000kg.
For the 76 VertiDrain Series
the tine depth
adjustments
are made
comfortably from
the tractor seat
via the hydraulic
controls.
Verti-Drain 7626
The 7626 is the largest and heaviest model yet in the
Verti-Drain family.
For easy transport a bogy wheel kit can be added.
15
Aeration
Verti-Drain accessories
wheel kit – H-Models
A retro–fit bogy wheel system is available for
easy transport, and less tractor horsepower is
needed.
turf hold down fingers
core collector
The Core Collector uses a special two stage collecting system. A flexible
rubber flap gathers most of the cores. Behind this is a row of ground
following aluminium fingers to ensure that all material is collected
without the risk of damage to the turf.
The turf hold down fingers ensure that, when
vertidraining or coring, there is no danger of turf
damage even with a very shallow root system.
rotating brush
A rotating brush at the back of the Verti-Drain
incorporates sand into the holes, levels the ground
or breaks up the cores. The brushes are segmented,
so that it is ideally suited to process the material.
windrow kit
The Windrow kit aligns the cores for easy collection
16
Verti-Core + Easy-Core: vertical aerators - pulled
The tines of these aerators penetrate the soil perfectly vertical, and as the penetration depth is limited they run at high speed.
Model
Verti-Core 1600
Easy-Core 116
Working width
Working depth
Weight
Tractor recomm.
1.6m (63”)
125mm (5”)
820kg (1804lbs)
45hp with
1000kg lifting
capacity
5760m2 (62208sq.ft)
(at hole spacing
11x11cm)
1.1m (43”)
70mm (3”)
326kg (717lbs)
None:
own engine 12hp
7800m2 (84240sq.ft)
(at hole spacing
6½x17cm)
hollow+solid tines / core collector / windrow kit
hollow+solid tines
Max. capacity
Optional item
Verti-Core 1600
special core
deflectors
keep the cores
away from
the machine
The Verti-Core 1600 is a highly productive
and low maintenance turf aerator. Robust
construction combined with simple adjustments
make the Verti-Core reliable and easy to use.
A sturdy crank drives the tine arms
Support arms enable the Verti-Core to work in
extremely tough conditions.
Easy-Core 1600
The Easy-Core 116 is an economical aerator containing its
own 12hp engine, so that it can be operated behind virtually
any tow vehicle including riding mowers.
Operator friendly controls
17
Aeration
Easy-Core: vertical aerators - selfpropelled
These easily manoeuvrable walkbehind aerators produce perfectly vertical aeration holes.
Model
Easy-Core 104
Easy-Core 106
Easy-Core 108
Easy-Core 208
Working width:
Working depth:
Weight:
Engine:
Engine drive:
Standard Hollow Tines
Tine amount per set:
Capacity (max):
360mm (14”)
70mm (3”)
94kg (207lbs)
51/2hp B.&Stratton*
non-driven
Ø22x16x70mm
4
2043m2/h (22064sq.ft/h)
540mm (21”)
70mm (3”)
113kg (249lbs)
5hp Honda
non-driven
Ø22x16x70mm
6
2550m2/h (27540sq.ft/h)
520mm (20”)
70mm (3”)
136kg (299lbs)
5hp Honda
non-driven
Ø22x16x70mm
8
2550m2/h (27450sq.ft/h)
520mm (20”)
70mm (3”)
146kg (321lbs)
51/2hp Honda
driven
Ø22x16x70mm
8
2780m2/h (30024sq.ft/h)
Options
Hollow Tines
Ø16x91/2x70mm or Ø22x16x70mm or Ø45x38x70mm
Solid Tines
Ø91/2x70mm or Ø22x70mm
Chariot-ride behind kit (for model 208 only) / Special air-filled tyres
* 5hp Honda engine is optional for model 104
There are 4 models
of the walk-behind
Easy-Core, each with
a different amount of
arms equipped with
tines.
Soil compaction is
being relieved, leading
to better root growth
and improved drainage.
This aids thatch
control, and stimulates
the density of the turf.
Models 104, 106 and 108 are all non-driven, and contain respectively 4, 6, and 8 tine arms, while model 208 is driven and contains
8 tine arms.
Hole spacing:
Easy Core 104 + 106
A = 15cms, B = 9cms
Easy Core 108 + 208
A = 17cm, B 61/2cms
Options:
an optional
chariot transfers
the Easy Core 208
to a comfortable
ride-behind
aerator.
Wide air-filled
tyres are optional
18
Verti-Quake: linear aerators - driven
The Verti-Quake decompacts the soil via rotating off-set blades, shattering it laterally.
Model
2510
2516
2521
3822
Working Width
Working depth max.
Weight:
Tractor required
3-point connection
Capacity (max)
Number of blades
Blade thickness
1.1m (43”)
250mm (10”)
470kg (1034lbs)
25hp, liftcap
650kg (1430lbs)
cat 1 and 2
1510m2/h (16308sq.ft/h))
12
12mm (0,5”)
1.6m (63”)
250mm (10”)
575kg 1265lbs)
30hp, liftcap
750kg (1650lbs)
cat 1 and 2
2400m2/h (25920sq.ft/h))
18
12mm (0,5”)
2.1m (83”)
250mm (10”)
690kg (1518lbs)
35hp, lift cap
850kg (1870lbs)
cat 1 and 2
3150m2/h (34020sq.ft/h))
24
12mm (0,5”)
2.2m (87”)
380mm (15”)
1250kg (2750lbs)
70hp, lift cap.
1500kg (3300lbs)
cat 2
3300m2/h (00000sq.ft/h)
24
15mm (0.6”)
Optional:
Coulter knives for keeping the slits open.
Model 2521
The Verti-Quake vastly
improves drainage, root
development, plus the uptake
of moisture and nutrients.
4 Verti-Quake models are
available, with a working depth
up to 550mm.
Model 2510
How does it work?
Decompaction of the
soil takes place via offset blades. Their rotary
motion, combined with
the forward speed, sets up a
wave action. Thus the soil
is shattered laterally, and
decompacted consistently
from the surface to full
working depth without
surface damage.
19
Multi -Spike, Level-Spike + Verti-Knife: linear aerators - non driven
Keeping the surfaces of sports turf open and able to breathe is the prime function of the Verti-Knife, Level-Spike and
Multi-Spike systems.
Model
Multi-Spike 1200
Level-Spike 1700
Level-Spike 2200
Verti-Knife 1600
Working width
Road width
Weight
Tractor required
1.35m (53”)
1.45m (57”)
400kg (880lbs)
Min. 18hp
1.8m (71”)
1.86m (73”)
405kg (891lbs)
Min. 35hp
2.4m (94”)
2.47m (97”)
495kg (1089lbs)
Min. 45hp
1.6m (63”)
2.0m (79”)
400kg (880lbs)
Min. 25hp
surface intense deep
aeration surface aeration
aeration
Working depth
Number of mounting discs
up to 250mm (10”)
9
up to 250mm (10”)
12
up to 250mm (10”)
16
40mm(1.6”) 40mm(1.6”) 25-150mm (1”-6”)
15
30
6
Standard
Knives/coring tines number
Truckster knives
Deep Slit knives
Fine Slit knives
Twisted Deep Slit knives
Hollow Coring tine
36 truckster knives + rear roller
Standard/Maximum
36/154
36/154
192/192
36/154
54/108
48 deep slit knives
Standard/Maximum
48/ 72
48/ 72
264/264
48/ 72
72/104
64 deep slit knives
Standard/Maximum
64/196
64/196
360/360
64/196
96/192
discs + axles for intense
aeration + rear roller
Options
wheelframe for
weight transfer system
wheelframe + rear roller + weight transfer system
Deep aeration axle set
Multi-Spike 1200, Level-Spike 1700, Level-Spike 2200
The Multi-Spike
and Level-Spike
are slitting the
soil with different
size knife options,
and by locking
the rear roller the
maximum depth
is being set.
The Multi-Spike 1200 can
be utilised with 2 wheels for
transport (photo above left). In
this configuration the MultiSpike can be used in conjunction
with virtually any prime mover
which has basic flow and return
hydraulics.
Four knife sizes + spoon tines
Max. working depth
Deep Slit Knife
Truckster Knife
Fine Slit Knife
Twisted Deep Slit Knife
Hollow Tine
250mm
200mm
100mm
250mm
125mm
Thickness
5mm
3mm
3mm
5mm
26mm Ø
Twisted Deep Slit knives are designed in a twisted form
so that a more aggressive slicing job can be done.
The optional weight
transfer system ensures
that the weight of the
tractor is transferred on
to the knives in hard soil
conditions
20
Hollow tine option
Verti-Knife
The Verti-Knife runs round
discs of different diameters
and configurations through
the soil, up to a depth of
150mm. The movement of
air, water and nutrients is
encouraged throughout the
critical root zone area. This
results in vastly improved root
density and rooting depth
3 FUNCTIONS
The Verti-Knife has 3 basic functions and positions.
By interchanging the different axes with discs:
Position 1
Surface Aeration
Working depth
Disc diameter
Disc thickness
Number of Discs
Disc Spacing
10-40mm
200mm
3mm
15
The 15 minidiscs (working
depth up to 40mm) are ideally
used when roots are shallow,
and when minimal surface
disturbance is required.
100mm
Position 2
Intense Surface Aeration
Working depth
Disc diameter
Disc thickness
Number of Discs
Disc Spacing
40mm
200mm
3mm
30
A cassette of 30 minidiscs can
be adjusted to a working depth
up to 40mm,
for very intense aerification.
Disc spacing is only 50mm.
50mm
Position 3
Deep Aeration
Working depth
Disc diameter
Disc thickness
Number of Discs
Disc Spacing
25-150mm
450mm
4mm
Six discs with a large diameter
of 450mm, at 300mm spacings,
penetrate the soil up to 150mm.
Disc spacing is 300mm.
6
300mm
The double axle with discs for intense surface aeration
Quake Meter
The Quake Meter is a penetrometer which is the perfect
scientific instrument for measuring compaction levels in
the soil at all depths down to 600mm (24”). High quality
stainless steel and aluminium alloy for durability and
accuracy.
Hydraulic action gives steady and consistent read out in
all conditions.
21
Topdressers: Rink brush spreaders
The Rink brush topdressers most accurately “shoots” the material with force between the grass blades.
Model
Spreading width
Spreading thickness
Weight
Hopper capacity
level
Tractor size
Optional:
Rink SP950 Rink TB950 Rink 1005
Rink 1205
Selfpropelled
utility vehicle
version
Walk-in-front
Tow Behind
3-point
hitch version
Rink 1010
Rink 1210
Rink 1520
0.95m (37”)
0.95m (37”)
1.50m (59”)
1.80m (71”)
1.50m (59”)
1.80m (71”)
1.40m (55”)
2.0m (79”)
0.3 to 10mm
0.3 to 10mm
0.3 to 10mm
0.3 to 10mm
0.3 to 10mm
0.3 to 10mm
0.3 to 40mm
0.3 to 40mm
280kg (616lbs) 190kg (418lbs) 200kg (440lbs) 300kg (660lbs) 270kg (594lbs) 370kg (814lbs) 950kg (2090lbs) 1950kg (4290lbs)
0.33m3
selfpropelled
6.5hp engine
0.33m3
0.75m3
Any pull vehicle 25hp +:
1.0m3
0.75m3
1.0m3
2.0m3
4.5m3
for utility vehicle 20hp +:
20hp+:
25hp+:
65hp +:
double acting hydraulic valve and min. oil supply of:
12ltr/[email protected]
20ltr/[email protected]
25ltr/[email protected]
40ltr/[email protected]
120bar
140bar
140bar
175bar
Auxiliary tank and pump unit (Rink 1010,1210, 1520)
Own 13hp engine (Rink 1010, 1520)
4 pivoting wheels (Rink 1520)
Rink SP950
The Rink SP950
contains a 6,5hp
engine, and
the weight of
the machine
is evenly
distributed over
6 wheels in order
to minimize
ground pressure.
The Rink TB950
is a wheel drive
topdresser and
can be pulled
by virtually
any vehicle.
The brush and
conveyor belt
are driven by
the 4 wheels (or
optional by 2
wheels), ensuring
a consistant
application rate.
22
Rink 3045
A Quad or ATV
easily operates the
Rink TB950 pulled
Rink TB950 Pulled
Topdressing
Rink 1005
The lightweight
Rink 1005
can easily be
connected to
different vehicles
The Rink 1005 on the Kubota RTV (l) or as a 3-point hitch version (r)
Rink 1205
for Utility
Vehicle
The Rink 1205
contains a hopper
made of aluminium
and is placed on
utility vehicles. It
covers the tyremarks
of the vehicle due
to its large working
width of 1.8m.
Rink 1010
The floating
tyres
minimize
ground
pressure
and the
lightweight
hopper is
made of
aluminium
to avoid
rusting.
23
Topdressing
Rink 1210
The Rink 1210
is low to the
ground, for easy
refilling and
ensuring the
operator a good
rear view.
The Dry-sand plate ensures
extra accurate spreading
Rink 1520
The Rink 1520 can
spread extremely
accurately.
Optional: the Rink 1520
can be equipped with
4 small pivoting tyres .
Rink 3045
The Rink 3045
has a capacity
of 4,5mtr3.
24
Topdressers: Easy-Spread selfloading spreaders + Rink drumspreader
The Easy-Spread loads itself by a one man operation, while the Rink 2020 is ideal for spreading coarse material.
Model
1300
Operation
Working width:
Spreading thickness:
Weight (empty):
Hopper capacity:
Tractor required:
3-point hitch
1.43m(56”)
1600
3-point hitch
1.73m (68”)
0-10mm (0-0.4”)
265kg (583lbs)
325kg (715lbs)
0.5m3 (17.6qu.ft)
0.75m3 (26.5qu.ft)
28hp+1000kg (2200lbs) 38hp+1400kg (3080lbs)
lift capacity + double
lift capacity + double
acting hydraulic outlet. acting hydraulic outlet.
1500TR
2000TR
Rink 2020
pulled, on tyres
1.5m (59”)
pulled, on tyres
2.0m (79”)
pulled, PTO driven
1.4m (55”)
3.25mm
950kg (2090lbs)
2.0m3 (71qu.ft)
25hp
635kg (1397lbs)
900kg (1980lbs)
1.35m3 (47.7qu.ft)
1.85m3 (65.3qu.ft)
45hp+
50hp+
double acting hydraulic outlet
Easy-Spread 1300 + 1600
The Easy-Spread models 1300+1600 are carried
in the 3-point hitch of the tractor and are very
manoeuvrable
Easy-Spread 1500TR + 2000TR
The Easy-Spread 2000TR
carries the load over 7 tyres
The Easy-Spread TR series
is a 1 man and tractor
operation. The large
hopper is hydraulically
raised or lowered by
powerful hydraulic
cylinders for loading and
spreading. A wheel transfer
frame then takes the
weight when transporting
the heavy load.
Rink 2020
The PTO driven
Rink 2020 contains
a drum at the
rear and is ideal
to spread coarse
material.
25
Topdressers: Rink disc spreaders
The Rink twin-disc topdressers spread material up to 15m (49ft) wide, and work fine when wet sand is applied.
Model
DS800
Spreading width:
Spreading thickness:
Weight:
Hopper capacity level:
Tractor size:
2 to 12m (6½-40ft) variable
2 to 15m (6½-49ft) variable
0.5 to 15mm (0.02-0.60”)
0.5 to 15mm (0.02-0.60”)
460kg (1012lbs)
490kg (1078lbs)
820kg (1804lbs)
1800kg (3960lbs)
0.8cu.m (28cu.ft)
1.2cu.m (42cu.ft)
2.0cu.m (70cu.ft)
3.8cu.m (125cu.ft)
25hp+:
25hp+:
35hp+:
60hp+ single acting
Double acting hydraulic valve and min.
valve or brake valve
oil supply of 25lt/min by 140 bar (2031psi)
Optional:
towed
DS1200
towed
Conveyor belt
DS2000
towed
DS3800
towed
Conveyor belt
DS800
on utility vehicle
2 to 12m (6½-40ft) variable
0.5 to 15mm (0.02-0.60”)
440kg (968lbs) incl subframe
0.8cu.m (28cu.ft)
utility vehicle
with OEM oil pump
with min.oil supply
of 25lt/min at 140 bar
(2031psi)
Conveyor belt
DS800 + DS1200 towed
The Rink DS800 + DS1200 disc spreaders
have a hopper capacity of 0.8m3 and 1.2m3
(level). The operation of the belt and spinners
is done from the tractor seat.
Option:
An electrical
control panel,
carried to the
operator seat,
controls the belt
and spinner
speed
The Cross Conveyor weighs
150kg and has a length of 3m;
the width of the belt is 30cm.
26
Aeration
DS2000
The 2.0m3 capacity
DS2000 evenly spreads
wet topdressing material.
DS3800
The large DS3800 contains 2 large balloon tyres
to minimize ground pressure.
DS800
for utility vehicle
The DS800 can be placed on utility
vehicles (John Deere Progator + Toro
Workman) and the operation of the belt
and spinners is done from the seat, by
switching the hydraulic levers.
27
Seeding + Overseeding
Speed-Seed: spiked seeders
The Speed-Seed uses spiked rollers, spreading seed in thousands of tiny holes.
Model
Speed-SeedWB
Speed-Seed1200
Speed-Seed1600
Speed-Seed2100
Speed-Seed2400
Working width:
Weight:
Number of holes:
Hopper capacity:
Seed-density:
Tractor required:
Ground speed:
0.61m (24”)
1.2m (47.2”)
1.6m (63”)
2.1m (83”)
2.4m (94”)
225kg (495lbs)
370kg (814lbs)
450kg (990lbs)
625kg (1375lbs)
750kg (1650lbs)
940 per m2 (1124 per sq.yd) or 1840 per m2 (2201 per sq.yd) with optional 2nd spiked roller
10kg (22lbs)
168ltr (6cu.ft)
225ltr (8cu.ft)
300ltr (10.7cu.ft)
336ltr (12cu.ft)
fully adjustable for any type of seed
own engine, 5hp, Honda 20hp+450kg (990lbs) lift. 30hp+550kg (1210lbs) lift. 35hp+800kg (1760lbs) lift. 40hp+850kg (1870lbs) lift.
up to 10km/h (6mph)
Optional:
2nd spiked roller (all models except Speed-SeedWB) / Dirt scraper for spiked roller (all models)
Speed-Seed WB
The selfpropelled Speed-Seed WB carries
out all the overseeding works on fine turf
areas, and is fitted with a Honda engine of
5hp and hydrostatic transmission, which
produces an infinite range of forward
and reverse speeds up to 7km/h for all
conditions.
A rear brush sweeps the seed into the mass
of holes – leaving a groomed finish.
Speed-Seed pulled
The pulled Speed-Seed models are ideal to (over-) seed large areas
quickly. When both the front- and rear roller are equipped with the
individual cast rings, a total of 1840 holes per m2 can be achieved.
Sept 11, 2007 –
The Olympic
Grass, for the
Beijing Olympics
in august 2008,
first being
planted with
the Speed-Seed,
producing 1840
holes/m2 for the
seed to drop in.
Options:
An optional scraper is available for the Speed-Seed to keep the spikes
clean from soil. Extra weights can be added for hard grounds.
28
Verti-Seed + Overseeder : disc seeders
The disc seeders bury the seed accurately in grooves into the soil.
Model
Verti-Seed
Verti-Seed
Overseeder
Overseeder
Overseeder
Overseeder
004.804
004.1204
1275
1575
1575LV
2075
PTO driven
PTO driven
pulled
pulled
pulled (light version) pulled
Working width:
Weight:
Disc spacing:
Cutting depth:
Hopper Capacity:
Seed density per
100m2:
Tractor required:
0.84m (33”)
1.24m (49”)
1.2m (47”)
450kg (990lbs)
590kg (1298lbs)
685kg (1507lbs)
40mm (1 9/16”)
40mm (1 9/16”)
75mm (3”)
0-30mm (0-1 1/4”)
0-30mm (0-1 1/4”)
0-20mm (0-0.8”)
95ltr (21 gallon)
145ltr (32 gallon)
168ltr (37 gallon)
fully adjustable
fully adjustable
idem als OS1575
for any type of seed, up to 2grm/m2 (1/4lbs/1000sq.ft)
17hp, 600kg
22hp, 750kg
35hp, 900kg
(1320lbs) lift cap.
(1650lbs) lift cap.
(1980lbs) lift cap.
1.58m (62”)
1.58m (62”)
2.08m (82”)
1160kg (2552lbs)
825kg (1815lbs)
1480kg (3256lbs)
75mm (3”)
75mm (3”)
75mm (3”)
0-20mm (0-0.8”)
0-20mm (0-0.8”)
0-20mm (0-0.8”)
225ltr (49 gallon))
225ltr (49
( gallon))
300ltr (66
( gallon)
*0.2-2.8kg (0.4-6lbs) in 10 steps for fine seed
*0.2-4kg (0.4-9lbs) in 10 steps for course seed
40hp, 1300kg
35hp, 950kg
50hp, 1600kg
(2860lbs) lift cap.
(2090lbs) lift cap.
(3520lbs) lift cap.
Ground Speed:
Capacity:
up to 10km/h (6mph)
up to 6000m2/h
(7176sq.yd/h)
up to 12km/h (7.5mph) up to 12km/h (7.5mph) up to 12km/h (7.5mph)
up to 18900m2/h
up to 18900m2/h
up to 24909m2/h
Optional:
up to 10km/h (6mph)
up to 10000m2/h
(11960sq.yd/h)
up to 10km/h (6mph)
up to 14400m2/h
(17222sq.yd/h)
(22604sq yd/h)
(22604sq yd/h)
(29791sq yd/h)
Verti-Seed: Fine dosing kit for seeding up to 2grm/m2 (0.4lbs/11sq.ft)
Verti-Seed
The Verti-Seed is
designed for the
professional user who
wants precision control
of dosage and depth,
ensuring maximum
germination for all seed
types. The Verti-Seed’s
unique action provides
direct seed contact with
the soil which ensures
good germination rates.
Direction of travel
The Verti-Seed’s unique action first opens the turf
using special oval shaped discs followed by small
chisels. The seed is then fed through the seeding
funnel and released just above the slit where the
wind cannot blow it away. The seed is deposited
in the furrow accurately and can be precisely
adjusted to give you exact rates even for very fine
seed, like bents and fescues. The furrow is then
sealed by the seeding shoe. Each seeding element
is independently sprung enabling the Verti-Seed
to accurately seed on any ground contour.
The Overseeder
The Overseeder buries the seed up to 20mm(3/4”)
deep in the ground, safe from the beaks of hungry birds
and out to the way of the wind. The amount of seed
is controllable to a highly accurate degree and the
The seed drops
Overseeder takes the most undulating ground firmly
between the blades
in its stride. This is thanks to individually mounted
into the groove
coulters that allow the to ‘float’ over contours.
Overseeder
1275 equipped
with the
optional bogy
wheel kit.
29
Sweeping
Turf-Tidy: sweeper, verticutter + mower
The Turf-Tidy is a versatile sweeping machine, incorporating de-thatching verticutting and flail cutting as well.
Model
1310
1710
3000
Working width:
Hopper capacity:
Weight:
Recommend min. tractor size:
-as sweeper:
-as scarifier:
-as flail mower:
Tractor hitch:
Tractor hydraulic requirements:
1.3m (51”)
1.8m3 (64”)
890kg (1958lbs)
1.7m (67”)
2.3m3 (81cu.ft)
990kg (2178lbs)
1.8m (71”)
3.0m3 (106cu.ft)
1275kg (2805lbs)
20hp
28hp
35hp
Trailed ring and pin
single acting outlet
25hp
32hp
40hp
Trailed ring and pin
single acting outlet
PTO Speed:
Tipping height:
up to 540rpm
1680mm (66”)
up to 540rpm
1680mm (66”)
25hp
35hp
45hp
Trailed ring and pin
double acting outlet
+single acting valves.
up to 540rpm
2170mm (85”)
Standard items: Set of scarifier blades, PTO shaft, front roller, draw bar.
Optional items: Brush kit, front wheels, 2 extra rear wheels (to make total of 4) brush system (model 3000 only)
Turf-Tidy 1310 + 1710
The Turf-Tidy’s fully floating head follows the
grounds’ contours ensuring accurate cutting
and pick up. The unique turbo fan makes a
clean sweep of leaves, pine needles, paper
and grass clippings.
The diagonal highlift of the hopper
enables it to empty into trailers.
The Turf-Tidy is standard supplied with scarifier blades, but can also be
equipped with different flail blades.
Blade options:
Scarifier
blade
30
Plain
flail knife
Back to back
flail knife
Turf-Tidy 3000
The new Turf-Tidy
3000 sweeps, verticuts and mows very
accurate due to
the extremely fast
speed of the rotor
(2600rpm when
mowing or/and
scarifying; 750rpm
for sweeping).
The front and back
roller are easy to
adjust, and access
to the main rotor is
comfortable so that
the blades can be
changed quickly.
Its new design with
special wind paddles
ensures a better pick
up of the debris and
a better cut with its
blades.
Verti-Rake: verticutters + dethatchers
The Verti-Rake decompacts the turf surface using thin spring-loaded and flexible tines.
Model
Pro 200
Pro 300
Pro 450H
Pro 600H
Weight:
Tractor required:
Number of rakes:
Foldable:
175kg (385lbs)
10hp
168
no
230kg (506lbs)
20hp
200
no
380kg (836lbs)
25hp
360
hydraulically
550kg (1210lbs)
40hp
480
hydraulically
Options: (Pro 200 only): - Brushkit / - Towed version (mechanically) including drawbar
Verti-Rake
The Verti-Rake tines scratch between the turfblades and loosen up the
thatch. The tines are integrated in a special protection device that will
prevent the loss of tines during operation.
Oxygen and nutrients can be more easily introduced into the surface
area resulting in a healthier playing field.
The Verti-Rake can also be used to create a seed bed before overseeding.
Verti-Rake Pro 450H unfolded (l) and folded (r)
Model Pro 200 with brushes
31
Verti-Cut 1200 + Pedestrian Scarifier: verticutters
The robust verticutting machines remove thatch up to a depth of 40mm(1.6”)
Model
S510 Pedestrian
Model
Verti-Cut 1200 PTO
Verti-Cut 1200 Pulled
Weight:
Working width:
Working depth:
Spacing:
48kg (106lbs)
460mm (18”)
30mm (1,2”)
- with 15 blades 30 mm
- with 29 blades 15 mm
Weight:
Working width:
Working depth:
Tractor required:
130kg (286lbs)
1200mm (47”)
40mm (1.57”)
18hp at 540rpm PTO
187kg (411lbs)
1200mm (47”)
40mm (1.57”)
Wheels rear
4.10/3.50-4 Pneumatic with
Standard items:
inner tube, heavy duty steel
rims and greasable 1” bearings
8 x 1.75 semi-pneumatic
Taper lock bearings
on blade shaft
3/8” heavy duty positive
Options:
drive edge
Honda, 5.0 hp, 4 cycle
Storage stand
PTO
Set of knives 2mm carbite tip
Storage stand
18hp engine
Bogy kit with elect cylinder +
remote control.
Set of knives 2mm carbite tip
Set of knives 3mm carbite tip
Set of knives 3mm carbite tip
Wheels front
Bearings
Drive belt
Engine
S510 Pedestrian
Scarifier
The S510 Pedestrian Scarifier is a
professional verti-cutting machine
on a welded robust steel frame.
Blade types:
Straight blade (standard)
Thickness
Function:
Number of blades
Optional:
1.2mm (1/16”)
oil tempered blade
for fine scarifying
like golfgreens.
15 blades
14 extra blades
Diamond blade
Thickness
Function:
Number of blades
2.8mm (1/8”)
oil tempered blade.
for hard conditions.
14 blades
Blade with offset cutting tips
Function: for aggressive scarifying.
Verti-Cut 1200
The towed Verti-Cut 1200 scarifier
comes as a PTO driven version (r), or
as a unit containing its own engine (l).
32
Brushing
Brushes
A variety of brushes is on offer for spreading material, or for combing the grass blades.
Model:
Verti-Comb
1800
Verti-Comb
4000
Precision
Brush
Straight
Brush
Verti-Brush
Verti-Broom
185
Working width:
Weight:
Tractor required:
1.8m (71”)
104kg (229lbs)
18hp+200kg
lift cap.
4.0m (157”)
220kg (484lbs)
25hp+450kg
lift cap.
2.0m (79”)
150kg (330lbs)
18hp+200kg
lift cap.
2.0m (79”)
17kg (37lbs)
12hp+30kg
lift cap.
1.7m (67”)
1.85m (73”)
170kg (374lbs)
50kg (110lbs)
13hp with double
10hp
acting valve + 10ltr
per min. at 70bar
Verti-Broom
240
Pedestrian
Brush
2.4m (94”)
75kg (165lbs)
10hp
2.12m (83”)
18kg (40lbs)
-
Options Verti-Comb: Magnetic kit / Steel pins section front + rear / Drawbar + transport wheel kit (lift: mechanical or hydraulical or electrical) / Hydraulic lift kit
Model 1800
The VertiComb 4000
is foldable
resulting in
a total
width of
1.22m in
transport
position.
Verti-Comb
Model 4000
Magnet*
ear*
l
Stee
sr
rake
*=optional
items
Drawbar*
Steel rakes front*
Transport
wheel kit*
The Verti-Comb is designed for brushing and decompacting large areas of turf fast and efficiently. Foldable side wings can be added to
the standard Verti-Comb 1800 model (1.8m working width) converting it into the model 4000 (4.0m working width).
Several options can be added, like steel front or rear pins for decompaction, a magnet strip for picking up steel debris, and a transport
wheel kit with drawbar makes it possible to pull the Verti-Comb with any vehicle.
Precision
Brush
The Precision Brush
can be equipped with
brushes containing
different types of
bristles. The height
can be accurately
adjusted.
Straight Brush
The Straight Brush contains special
soft elastic bristles and removes dew
from the grass blades, in order to
prevent damage.
33
Brushing
Verti-Brush
The Verti-Brush levels and distributes topdressing material with powerful hydraulic brushes. The 5
counter-rotating brushes easily reach to the base of the turf to loosen and evenly redistribute fill or can be
applied to mix and level a new application. The durable poly brushes can be accurately set to a specific
depth to achieve a light surface brush-in or aggressively mix and loosen the deepest fill.
The 5 rotating brushes turn at high speed.
Verti-Broom
Pedestrian Brush
For brushing and striping of turf, nothing beats the proven Verti-Broom.
The highly effective triangular arrangement of the brushes will straighten
and groom each grass blade. The soft, long wearing brushes quickly and
efficiently brush surface infill to an even and level finish.
The Pedestrian Brush weights 18kg and is
ideal to take the dew off the grass blades and
to pull them up vertically.
Dragmat
Size
120x180cm
180x240cm
240x240cm
34
Weight
12kg (26lbs)
35kg (77lbs)
47kg (103lbs)
Stainless
steel
scraper
wire mats
are being
used to
evenly
distribute
topdressing
material.
Renovation
Vibra-Sandmaster
The Vibra-Sandmaster injects sand into the soil, and upgrades its profile.
Model
1000
1500
Weight:
Working width:
Working depth:
Hopper capacity:
Capacity/hour
Tractor requirements:
1650kg (3630lbs)
1.0m (39”)
5-25cm
1100kg (2420lbs)
500-1000m2/h (5400-10800sq.ft/h)
40-60hp+30-30ltrs min. hydr. oilflow+
12V 10amps+elect. connector + creepgear
2786kg (6129lbs)
1.5m (59”)
5-25cm
1650kg (3630lbs)
1000-1500m2/h (10800-16200sq.ft/h)
65-90hp+ 25-40ltrs min. hydr. oilflow+
12V 10 amps+elect. connector + creepgear
The Vibra-Sandmaster will efectively decompact and
surface drain the soil all in one pass. Mounted in the
front of the Vibra Sandmaster is the Verti-Quake,
which decompacts and slits the turf down to 25cms
deep. Vibrating coulter blades open up the slits and
inject sand down to between 1520cms. A rear set of flotation tyres
gently firm up the ground leaving
a level ready-to-play surface. The
Vibra Sandmaster works with wet
or dry sand or gravel and shows
very little surface disturbance.
Stone Burier
Finely tilled soil is the result after treatment with the Stone Burier.
Model
Stone Burier
105
135
170
210
180HD
210HD
250HD
300HD
Working width
Weight (in kg)
Working depth (cm)
HP required
1.5m (61”)
581 (1278)
15 (0.6”)
35hp
1.7m (67”)
708 (1408)
15 (0. 6”)
60hp
2.1m (83”)
787 (1731)
15 (0. 6”)
65hp
1.8m (71”)
1371 (3016)
20 (0. 8”)
80hp
2.1m (83”)
1511 (3324)
20 (0. 8”)
90hp
2.5m (98”)
1736 (3819)
20 (0. 8”)
100hp
3.0m (118”)
1997 (4393)
20 (0. 8”)
110hp
1.35m (53”)
640 (1408)
15 (0. 6”)
40hp
The Redexim Stone Burier buries
stones, grass and other materials
deep into the ground, leaving finely
tilled soil on the surface. It prepares
the seed-bed on any type of soil,
including hard and clayey soil,
both in the presence of stones or of
cultivation residues.
The soil is pressed through the fingers, while stones and sods are blocked and drop in the newly
created holespace.
Rotation
direction
of the blades
35
Renovation
Turf-Stripper
Renovation of the turf surface can take place with the Turf-Stripper equipped with frase blades or verti-cut blades.
Model
1200
2000
Weight:
Working width:
Working depth:
Operational speed:
Capacity/hour
Tractor required:
400kg (880lbs)
1.2m (47”)
up to 50mm
0 – 3km/h
500-1000m2/h
35hp with 2x double acting hydraulic valve
1080kg (2376lbs)
2.0m (79”)
up to 50mm
0 – 3km/h
1000-1500m2/h
40-50hp with 2x double acting hydraulic valve
Optional: - extra frase blades / - verti-cutting blades / - extra combi rotor
The TurfStripper is a
frase-mower,
removing
turf, weeds
and thatch
off a field.
A side arm
conveyor
transports
the debris
into a trailer.
Optional a
separate rotor
containing
verti-cut
blades can be
installed.
Frase blades (l) and verti-cut blades (r)
The side-arm conveyor is folded over the machine during transport
Redexim BV, Kwekerijweg 8, 3709 JA, Zeist, Holland, Tel: (31) 30 6 933 227, Fax: (31) 30 6 933 228,
E-mail: [email protected], http://www.redexim.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement