- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Power supply units
- LevelOne
- RPS-04A2
- Data Sheet
LevelOne RPS-04A2 power supply unit Datasheet
Add to my manuals3 Pages
LevelOne RPS-04A2 is a redundant power supply unit designed to provide reliable power to four switch units with 11.5 VDC outputs of up to 150W each. It features indicator LEDs for each port, power, fan, and thermal status, ensuring easy monitoring of the system's health. The RPS-04A2 offers enhanced protection against thermal overload, over-voltage, over-current, and short-circuits, ensuring the safety and longevity of connected devices.
advertisement
2
Redundant Power
Supply Unit, 4 supplies of 150W
H/W Version: 1
RPS-04A2
1 2 2 3
1. LED Indicators
2. RPS Output Power
3. Internal Power Socket
Key Features
- Supports four switch units with 11.5 VDC outputs of up to 150 W
- Indicator LEDs located on the front panel
- RPS AC line cord can draw power from a different supply circuit
- DC line cords provide backup power to attached devices
- Thermal overload protection prevents the RPS from overheating if a thermal overload occurs
- Over-voltage protection shuts down an output channel if the voltage exceeds a preset threshold
(12.3 V)
- Over-current protection shuts down the RPS if the output load exceeds a preset threshold. (14.5 A)
- Short-circuit protection prevents the RPS from being damaged from a short circuit on any output channel
- The RPS will operate under a no-load condition
Related Product
GTL-2690
20 GE + 4 GE Combo SFP + 2
10GE XFP Module slot L3 SNMP
Stackable Switch
GTL-2691
20 GE + 4 GE Combo SFP + 2
10G Slots L3 Managed Stackable
Switch
www.level1.com I one world_one brand_one level_ Ethernet Switches 3
Technical Specifications
Ports
4 RPS DC power outlets
LEDs
Port: Link, Activity
System: Power, Fan, Thermal
Weight
7.38kg
Dimensions (W x D x H mm):
440 x 323 x 43 mm
Temperature (°C):
Operating: 0 to 45 °C (32 to 110°F)
Storage: -40 to 70 °C (-40 to 158 °F)
Humidity (Non-condensing):
Operating: 5% to 95%
AC Input
100 to 240 V, 50 to 60 Hz
DC Power Cable Connector
14-pin P-Type connector
Power Supply
Internal, auto-ranging transformer: 100 to 240 VAC, 50 to 60 Hz
Output 11.5 VDC
Power Consumption
644 W (Maximum)
161 W (Maximum per port)
Maximum Current
7.8 A @ 110 VAC
3.5 A @ 240 VAC
Overcurrent Protection
Ports are shutdown when output exceeds 14.5 A
Over-voltage Protection
Ports are shutdown when output exceeds 12.3 V
Power Supply
+11.5 VDC
Initial accuracy: +/- 1%
Current: 2 A (minimum), 10 A (maximum)
Line regulation: +/- 1%
Load regulation: +/- 10%
Overshoot and undershoot: 5%
Approval and Compliance:
CE Mark Class B
FCC Class B
VCCI Class B
CISPR Class B
Product Diagram
RPS Power Cable
Power Cable
RPS input port
RPS output port
RPS-04A2
AC Power Supply No.1
AC Power Supply No.2
Note: For International use, you may need to change the AC line cord. You must use a line cord set that has been approved for the receptacle type in your country.
Order Information
Package Contents
RPS-04A2: Redundant Power Supply Unit, 4 supplies of 150W
RPS Power Cable x 4
User Manual
Power Cord
19” Rackmount Kit
4
All mentioned brand names are registered trademarks and property of their owners. Technical specifications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
V1.0
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Power supply
- LED indicators
- Black