Null Multimedia LED Projector User manual

USER MANUAL

Please read this user manual carefully before using your unit.

CONTENTS

Contents..........................................................................................................................................................1

Caution............................................................................................................................................................. 2

What's in the box...............................................................................................................................................3

Product Introduction.........................................................................................................................................4

Remote Control Introduction..............................................................................................................................5

How To Use The Remote Control And Connect To Other Equipment........................................................................6

How to use the projector....................................................................................................................................7

How to extend the projector to be the second screen to PC....................................................................................8

Main Menu Introduction................................................................................................................................9 -14

Troubleshooting..............................................................................................................................................15

Specification...................................................................................................................................................16

-1-

CAUTION

Do not look into the lens, while the projector is in operation.

Do not use the projector under extremely hot, cold and high humidity condition.

Do not cover or block vents of the projector.

No user serviceable parts.

Do not use the projector at dusty and dirty places.

Unplug the projector if you are not going to use it for a while.

!

Note: If you want to unplug the projector, please at least leave 30 seconds cooling time after the power being turned off.

-2-

WHAT'S IN THE BOX

CHECKING ON THE ACCESSORIES

Note: the appearances of accessories may vary from country to country, please refer to the actual items in the box.

Projector

POWER OFF

Remote Control

(one piece of CR2025 Lithium

battery is included)

Yellow

White

Red

RCA AV Cable

User Manual

USB Cable

Adapter

-3-

PRODUCT INTRODUCTION

FRONT VIEW

1

13

12

11

10

9

8

2

4

5

6

7

TOP VIEW

REAR VIEW

3

-4-

1. Lens

2. Speaker

3. RESET

14

15 16 17

4. Power: Hold the button for three seconds to turn on/off the

projector

5. Power-saving button

6. USB port: connects USB equipment

7. Micro SD card slot

8. Direction Keys

(a) Move the cursor up

(b) Go previous track when playing video

(a) Move the cursor down

(b) Go next track when playing video

(a) Move the cursor left

(b) When playing music, use the button to choose function

operation or go fast backward when playing video

(a) Move the cursor right

(b) When playing music, use the button to choose function

operation or go fast forward when playing video

9. OK: Confirm/play

10. RETURN: To exit the current mode or return to the previous

11. MENU: Return to main menu

12. SOURCE: To switch between external AV signal mode and

internal signal mode

13. Power indicator

14. IR receiver

15. Mini USB port: Connects to PC, Notebook etc

16. Earphone socket

17. AV IN: connects to DVD player, STB etc

7

8

14

16

10

1

3

REMOTE CONTROL INTRODUCTION

POWER OFF

12

9

15

13

11

5

6

2

4

ITEM NAME

POWER OFF

FUNCTION

Turn off the projector

To switch between internal signal mode and external AV signal mode

SOURCE

PHOTO

MUSIC

To enter the photo browsing interface directly

To enter music list interface directly

VIDEO

SETUP

To enter video list interface directly

To enter setup menu

DOCUMENT

To enter document list interface directly

MENU

RETURN

Return to main menu

To exit the current mode or return to the previous

VOL-

VOL+

Decrease the volume

Increase the volume

(a) move the cursor up (b) go t o the previous track when playing video file

(a) move the cursor down (b) go to the next track when playing video file

(a) move the cursor left (b) when playing music, use the button to

choose function operation or go fast backward when playing video

16

(a) move the cursor right (b) when playing music, use the button to

choose function operation or go fast forward when playing video

Confirm/pause/play

-5-

HOW TO USE THE REMOTE CONTROL AND CONNECT TO OTHER EQUIPMENT

REMOTE CONTROL BATTERY INSTALLATION

Battery battery cover mobile phone

Coin

Note

Figure 1 Figure 2 Figure 3

Please use 3V CR2025 lithium battery or the same type battery

which manufacturer recommends .

Do not dispose the used battery in fire, otherwise, it may cause an explosion.

If the battery is dead or you do not use the remote control for a long time, please take out the battery to prevent battery leakage in the compartment.

OPERATION RANGE

For an effective operation, please point the remote control to the

IR sensor at the back of the projector. The maximum signal working range is shown as below:

The outer audio/video epuipment

Note:

When connecting to other equipment, the volume is controlled by outer equipment.

Connecting USB drive

Insert the USB drive into the USB socket at the back of projector.

Connecting Micro SD card

Insert the Micro SD card into the Micro SD card slot on the left side of the projector.

PO

WE R O

CONNECTING TO OTHER EQUIPMENT

Connecting AV equipment

Use RCA AV cable to input the audio/video signal from other equipment to the projector. Press SOURCE on the remote control to switch to AV channel after being connected correctly.

-6-

Micro SD

Connecting computer

Connecting computer as per the following image shown.

Mini USB

USB adapter

USB

HOW TO USE THE PROJECTOR

1. Connect power supply 3. Place the projector and align it with the screen

2. Turn on video equipment and projector

Press and hold the button for 3 seconds to turn on the projector.

4. Adjust the focus

Lens adjusting knob: turn the knob to adjust the focus to

make the image clear.

-7-

HOW TO EXTEND THE PROJECTOR TO BE THE SECOND SCREEN TO PC

SUB DISPLAY FUNCTION

EzDisplay is a PC software, which is easy to operate and can extend the projector to be a second screen to PC.

Install and Drive The Application

Turn on the projector, use USB adapter to connect computer and the unit.

Select My Computer.

Please open the removable disk “Ezdisplay".

Double click "Ezdisplay-xxx.exe" to pop-up Setup Wizard, and then follow the prompts to install, please restart the computer after the installation is done .

Note:

Before the driver installation, please turn on the projector and

connect the unit with com puter c orrectly to allow the projector

detecting the connection of other equipment and start the

installation of the driver automatically; otherwise, you need

to install the driver manually.

Do not insert the USB device and Mini

USB into the unit at the same time.

Ez Display Application Configuration

On the Desktop, click the right button of mouse to select Display Properties

Setting select "(default monitor)"on

EZ Display from Display (D), as per the right image shown.

After "EZ Display's (default monitor)" is selected, tick off "Extend the desktop of Windows to the mo

nitor” option, and then click “ confirm" and "applications", save and exit.

Ez Display Program Application

Run the application: click Start Application EzDisplay Ez Display.

-8-

Full Screen Mirror:

Extend the monitor to the projector directly, the display output is 1024x768

Compatibility Mode:

Extend the display to projector and switch display output to be 640 x 480.

Exit: Exit the application

Display status: after the application has run, the shortcut icon appears on the right corner of the tool bar, as the image shown on the right .

Double click the shortcut icon on the tool bar to display

EZ Display Control Window .

Use the right button of mouse to click the icon to display the Control Window .

Disconnected

Connected

MAIN MENU INTRODUCTION

VIEWING PHOTOS

memory.

2. Use / to select

Photo

, press

OK

to enter p hoto

playing list, or press

PHOTO

to enter directly.

INTERNAL

4. Press OK to enter photo browsing mode

PHOTO MUSUIC

VIDEO

DOCUMENT SETTING FILE

3. Use / to select your desired p hoto .

Micro SD

You can use / to select the function, and then press

OK

to operate. OSD function menu explains as below.

Rotate

0

90

180

270 previous Full-screen display Copy Exit

-9-

Zoom

0

1

2

3

4

Next Delete Photo information

Viewing Slideshow

After entering the full-screen display mode, the unit starts the slideshow as per the set duration of each photo.

5. Press

RETURN

exit the current mode or return to the previous.

MAIN MENU INTRODUCTION

PLAYING MUSIC

memory.

2. Use / to select Music, press

OK

to enter music

playing list, or press

MUSIC

to enter directly.

INTERNAL

PHOTO

MUSUIC

VIDEO

Micro SD

You can use / to select the function, and then press

OK

to operate. OSD function menu explains as below.

VOLUME Fast backward Fast forward

A

VOLUME+ Play

Pause

Repeat all

Repeat one

Random

4. Press

RETURN

exit the current mode or return to the previous.

DOCUMENT SETTING FILE

3. Use / to select your desired music, press

OK

to play.

Music 1

Michal Jackson

BEYOND

MariahCarey

BarbieGirl

Miss You Finally

Forever Love

-10-

MAIN MENU INTRODUCTION

PLAYING VIDEO

memory.

2. Use / to select Video, press

OK

to enter video

playing list, or press

VIDEO

to enter directly.

INTERNAL

4. Press OK to view full-screen.

Micro SD

PHOTO

MUSUIC VIDEO

DOCUMENT SETTING FILE

3. Use / to select your desired video.

Video 1 5

[640x480]StarCraft2Ci

[640x480]dragon.AVI

[800x600]Teacher.AVI

[640x480]Superman.A

[800x600]Big bowl.AVI

-11-

9

2

5

Projector

6

4

1

3

Remote control

9

1

2

5

7

4

6

3

8

1

4

5

2

3

6

7

8

9

OK

RETURN

MENU

Confirm/pause/play

Go fast backward

Go fast forward

Go to the previous video play

Go to the next video play

Exit current mode or return to the previous

Volume -

Volume+

Return to main menu

MAIN MENU INTRODUCTION

READING DOCUMENT

memory.

2. Use / to select DOCUMENT, press

OK

to enter

DOCUMENT playing list,

directly.

or press

DOCUMENT

to enter

INTERNAL

PHOTO

MUSUIC

VIDEO

DOCUMENT SETTING FILE

3. Use / to select your desired DOCUMENT, p ress

OK

to play.

Document

AllBooks

BarbieGirl.txt

2 6

SilentNight.txt

Twins.txt

Say forever.txt

Big World.txt

Feeling .txt

1

2

3

4

5

OK

RETURN

Select / confirm exit the current mode or return to the previous

Hold the button down for a few seconds to zoom out on the page, press the button to move the page left

Hold the button down for a few seconds to zoom in on the page, press the button to move the page right

Hold the button down for a few seconds to go fast backward, press the button to go previous

6

Hold the button down for a few seconds to go fast forward, press the button to go next

4. Press

RETURN

to exit current mode or return to

the previous.

-12-

MAIN MENU INTRODUCTION

SYSTEM SETUP

1. Use / to select SETTING, press

OK

to enter setting

playing list, or press

SETTING

to enter directly.

INTERNAL

PHOTO MUSUIC

DOCUMENT SETTING

VIDEO

FILE

2. Use / to select the sub-menu, press

OK

to

enter setting

System Setup

Language

Version

Set Default

System Setup

Item

Language

Version

Set Default

Function

Setting display language

Display version information

Restore factory setting

Setting value

English/Japanese/Simplified

Chinese/Traditional Chinese

/Spanish

Display software version information

ON/OFF

Photo Setup

Item

Background Music

Display ratio

Slide show Duration

Function

Setting the background music

Setting value

ON/OFF

Setting display ratio Original /Full Screen

Setting the duration of each photo

3 Sec./5 Sec./10 S ec/

15 S e c/20 Se c

Video Setup

Item Function

Display ratio Setting display ratio

Repeat mode Setting playing mode

Setting value

Original / Auto Zoom / Full Screen

Sequence / Random / Single

Music Setup

Item Function

Repeat mode Setting playing mode

Setting value

Sequence / Random / Single

4. Press

RETURN

exit the current mode or return to the previous.

Music Setup

the value, press OK to confirm and exit.

-13-

MAIN MENU INTRODUCTION

FILE MANAGEMENT

memory.

2. Use / to select File, press

OK

to enter file

4. Press to go to the center information area, press

OK to delete or copy.

INTERNAL

Copy

PHOTO MUSUIC

VIDEO

DOCUMENT SETTING FILE

3. Use / to select your desired file.

5. Press

RETURN

exit the current mode or return to the previous.

-14-

TROUBLESHOOTING

Make sure the unit is connected to video equipment or computer correctly.

Make sure all equipment is connected to the outlet and the power is on.

Make sure the unit is operated within the operation temperature.

No image appears when operating the unit with computer, please restart the computer.

Problems

No display

No image

Possible Solutions

1. Check if the power cord of projector is connected to the outlet correctly.

2. Check if the power is turned on.

1. Check if the unit is connected to video equipment and computer.

2. Check if the unit is switched to the correct channel.

3. Check if the input signal from computer is correct (The computer's resolution is usually set to be 1024 x768,

refresh rate 60Hz).

4. When connecting with portable computer, you usually need to change the output setting of the monitor.

No sound

No photos display while USB device has been inserted

No video while memory card or USB stick has been inserted

Remote control doesn't work

1. Check if the audio cable is connected.

2. Adjust audio source.

3. Adjust the volume of projector.

1. Remove and insert the USB or internal memory and make sure they are inserted in the place properly or check

if there are photos stored in USB or internal memory.

2. Check if photo function is turned on in USB using format.

3. Make sure the photo files are in correct format.

Note: You may use Microsoft Paint program to display the wrong-format image and save the image in

correct format before displaying on this Frame.

1. Remove and insert the USB or internal memory and make sure they are inserted in the place properly, or check

if there are correct video files in the memory card/USB.

2. Check if the unit is switched to the correct channel and the video function is turned on.

1. Install new batteries.

2. Make sure there are no obstacles between you and the projector.

3. Make sure the remote control is within the operating range.

-15-

SPECIFICATIONS

Dimension

Weight

Resolution

Adapter

Total power

Battery life

Brightness

Audio / Video input

Item

Audio output

The best projection distance/dimension

Supported outer equipment

Memory capacity

Readable memory card

Operation temperature

Storage temperature

Photo format

Specification

122x69.5x13mm

140g

640 x 480 Pixels

Output: DC 5V/1.5A

<15W

60 Min

Full 25LM / Half 16LM

USB x 1

MINI USB x 1

AV Interface

Micro SD card

Built-in speaker, earphone

2.03M/80”

USB device, PC, Micro SD card

4GB

SD/TF (the max. is 32G)

Temperature 5 35 Humidity 20 80%

Temperature -10 35 Humidity 10 95%

JPG, BMP

-16-

317-09-V01