Olympus R5 DSS Player Pro Installation Guide

Olympus R5 DSS Player Pro Installation Guide
Add to My manuals

Below you will find brief information for R5 DSS Player Pro. DSS Player Pro R5 is a Dictation/Transcription system that supports assignments of various sizes, from individual users to multiple users. It can be used to capture audio data highly compressed with an Olympus VoiceTrek series IC recorder (hereinafter referred to as “the recorder”), and allows for real-time playback, editing, and insertion of index information. DSS Player Pro R5 and the recorder support the playback of DSS, an international standard for audio recording, Microsoft-promoted WMA, and MP3.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Olympus DSS Player Pro R5 Installation Guide | Manualzz

DSS Player Pro R5

Installation Guide

Contents

1 I I N T R O D U

C T I I O N · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

4

1.1

DSS Player Pro R5 Outline ········································································5

1.1.1 System Configurations of DSS Player Pro ··················································· 6

1.1.2 Modules and Tools ·················································································· 8

1.2

Operating Conditions················································································9

1.3

Trademarks and Copyrights····································································· 10

1.4

Supported Devices················································································· 11

1.5

Contents of the Installation CD································································ 12

2 S Y S T E M C O N F I I

G U R A T I I O N · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

1 3

2.1

Stand-alone System··············································································· 14

2.2

Workgroup System ················································································ 15

3 P R E P A R A T I I O N B E F O R

E I I N S T A L L A T I I O N · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

1 6

3.1

Licenses ······························································································· 17

3.1.1 Other License Keys ··············································································· 18

4 I I N S T A L L A T I I O N

M E T H O D S · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

1 9

4.1

Determining the System Configuration ····················································· 20

4.2

Installing from a CD··············································································· 21

4.3

Installation for a Stand-alone System······················································· 22

4.4

Installation for a Workgroup System························································· 23

4.4.1 If not performing application sharing ······················································· 23

4.4.2 If performing application sharing ···························································· 24

5 P R O C E D U R E F O R I I N S T A

L L I I N G F R O M A C D · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

2 5

5.1

Installing DSS Player Pro for Stand-alone Systems ····································· 26

5.1.1 Starting the programs ··········································································· 29

5.2

Installing DSS Player Pro for Workgroup Systems······································· 30

5.2.1 Starting the programs ··········································································· 34

5.3

Installing Manager Tool ·········································································· 35

5.3.1 Starting the programs ··········································································· 38

5.4

Installing License Manager ······································································ 39

5.4.1 Starting the programs ··········································································· 42

5.5

Upgrading Installation ············································································ 43

5.6

Installing through the Maintenance Mode ·················································· 44

5.7

Installing Citrix/Terminal Service Virtual Driver ·········································· 45

5.7.1 When using Citrix Presentation Server ····················································· 45

5.7.2 When using Terminal Service·································································· 46

6 I I N S T A L L A T I I O N R E G A R D I I N G

S E R V E R A D M I I N I I S T R A T O R · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·

4

7

6.1

User Group Setting ················································································ 48

6.2

Auto Distribution by MSI Packages (Silent Installation) ······························· 49

6.2.1 If registering applications to be distributed, with a group policy··················· 50

6.2.2 Registering applications to be automatically distributed, with the log-in script 53

2 / 70

6.3

Installation Options Regarding MSI ·························································· 54

6.3.1 Method for specifying installation options ················································· 54

6.3.2 Installation option list regarding DPro5.msi ·············································· 54

6.3.3 Installation option list regarding DSS Citrix Client Driver ···························· 55

6.3.4 Installation option list regarding DSS Terminal Client Driver························ 56

6.3.5 Specification examples of installation options············································ 56

7 O T H E R M A T T E R S · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5 7

7.1

Repository Setting ················································································· 58

7.1.1 Repository setting procedure·································································· 58

7.2

How To Open a Port of the Firewall··························································· 60

8 T R O U B L E S H O O T I I N G · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6 1

8.1

Launcher Not Starting ············································································ 62

8.2

In cases where the default port number has already been used by IIS or others63

8.3

Starting Dictation Module or Transcription Module Not Allowed ····················· 64

9 S U P P O R T C O N T A C T S · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6 5

1 0 G L O S S A R I I E S · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6 6

3 / 70

1

Introduction

This section describes the outline of DSS Player Pro.

4 / 70

1.1 DSS Player Pro R5 Outline

DSS Player Pro R5 is a Dictation/Transcription system that supports assignments of various sizes, from individual users to multiple users. It can be used to capture audio data highly compressed with an Olympus

VoiceTrek series IC recorder (hereinafter referred to as "the recorder"), and allows for real-time playback, editing, and insertion of index information.

DSS Player Pro R5 and the recorder support the playback of DSS, an international standard for audio recording, Microsoft-promoted WMA, and MP3.

With peripheral devices connected, such as a DirectRec or foot switch, it provides a variety of additional functions, including audio streaming recording and remote control playback.

It also supports the Terminal Service, allowing this product to be used via the Terminal Service with the DSS

Terminal Service Client Driver.

It also supports the Terminal Service, so using the DSS Terminal Service Client Driver allows this product to be used via the Terminal Service.

In addition to the Release 4 features, Release 5 offers the following functions:

Support for playback, editing, and encryption of DSS Pro files

Improved dictation comments, such as instructional comments and verbal comments

Support for the Microsoft

®

DirectShow

®

Filter

Support for Citrix Presentation Server/Terminal Service

Easy-to-see and intuitive graphical user interfaces

Option dialog boxes that allow for centralized management of settings

Button customization to link device buttons with commands, and to edit their details

Administrative functions (with System Configuration Program) and settings of users, devices, and updates

For installation procedures of DSS Player Pro R5, please consult this Install Guide.

For the functions of DSS Player Pro R5, please consult Help of the individual applications after installation.

For the latest information, visit Olympus’s website at http://www.olympus-global.com/en/global/.

5 / 70

1.1.1 System Configurations of DSS Player Pro

DSS Player Pro offers two system variants with different administrative configurations.

Stand-alone System

With this configuration, an individual user enters the supplied license ID (for a single license), installs the system, and configures applications. User profiles (various settings for each user) are located on local PCs and managed by individual users.

About silent installation with a multi-license ID

Silent installation with a multi-license ID can standardize the settings of multiple users. For information on how to achieve this, refer to “ 6.2 Auto

Distribution by MSI Packages (Silent Installation) ”.

6 / 70

Workgroup System

With this system configuration, an administrator installs and configures the modules for each user, and centrally manages and operates them under a multi-license.

This system requires License Manager to be installed to manage the multi-license.

User profiles are placed in a shared folder on the file server. The administrator uses System

Configuration Program to assist each user in configurations and installations. A significant part of the user profile settings can be configured and locked in with System Configuration Program.

7 / 70

1.1.2 Modules and Tools

Dictation Module

This is an application for an author. It is mainly used to download an Dictation file recorded with a

DVR (Digital Voice Recorder), or to record an Dictation file directly onto a PC. It can automatically send a downloaded or directly recorded Dictation file via email or FTP. It also has the ability to automatically receive a transcribed document file and to manage it with a link to the corresponding

Dictation file.

Transcription Module

This is an application for a Transcriptionist. The application can notify the Transcriptionist of the arrival of a new Dictation file and switch to a smaller screen at the onset for easier transcription. It automatically receives and captures Dictation files, via email or FTP, for transcription. It has document management capability that can automatically start your word processor software before transcription, and can manage a document with a link to the corresponding Dictation file. In addition, if the original Dictation file was received via email or FTP, the application can automatically send a document file to a specified destination immediately after transcription has been completed.

System Configuration Program

This is an application for an administrator. It is used to deploy and manage DSS Player Pro R5 in an organization. System Configuration Program consists of System Customization Program and Device

Customization Program.

System Customization Program facilitates installation and updates of modules for end users

(Dictation Module and Transcription Module), manages application settings for end users (author and Transcriptionist), and updates firmware management.

Device Customization Program can customize, import, and export device settings.

License Manager

This is an application to manage licenses. It manages the licenses and accounts of Dictation Module and Transcription Module in a workgroup system.

The application can change each license account by grouping multiple single licenses as a multi-license.

8 / 70

1.2 Operating Conditions

The following table lists the operating conditions.

Item Condition

OS Microsoft

Microsoft

®

®

Windows

Windows

®

®

2000 Professional Operating System SP4

Microsoft ® Windows ®

XP Professional Edition SP2 / Home Edition SP2

Microsoft ®

XP 64-bit Professional Edition SP2 / Home Edition SP2

Windows Vista ® Ultimate / Enterprise / Business / Home Premium / Home

Basic

Microsoft ® Windows Vista ® Ultimate 64-bit edition / Enterprise 64-bit edition /

Memory

Business 64-bit edition / Home Premium 64-bit edition / Home Basic 64-bit edition

Microsoft

Microsoft

CPU Microsoft

®

®

®

Microsoft ®

2000/XP: Intel Pentium III 550MHz or higher

Windows Vista

Microsoft ® Windows ®

Microsoft ®

Windows

Windows

Windows

® Server 2003 Operating System

®

®

Server 2003 Operating System x64 edition

® : 800 MHz or higher

Windows ®

Server 2003: 550MHz or higher

Microsoft ®

Microsoft ® Windows ®

2000/XP: 128MB or more (256MB or more recommended)

Windows Vista ® : 500MB or more (1GB or more recommended)

Server 2003: 256MB or more

HDD’s free space

Drive

Display

Browser

USB

70MB or more

(700MB or more with .NET Framework 2.0 not installed)

CD-ROM drive installed

Resolution : 800 x 600 pixels or higher

65,536 colors or more (16.77 milion colors or more recommended)

Microsoft ® Internet Explorer 6.0 or later (with the latest Service Pack applied)

Audio device

Others

Supported

Languages

With the Dictation Module and Transcription Module:

One or more USB ports available

With the Dictation Module and Transcription Module:

A Microsoft WDM- or MME-compliant and Windows-compatible sound device

With Citrix Presentation Server:

Citrix Presentation Server 4.0/4.5 (A Citrix License separately required)

With Terminal Service:

Microsoft ® required)

Windows ® Server 2003 Terminal Service (* A TS CAL license separately

English, French, German, Italian, Spanish, and Russian

Installing DSS Player Pro R5 requires the privileges of Administrator.

Currently supported OSes are listed on our Web page. For the latest information, please visit the Olympus Web site at http://www.olympus-global.com/en/global/.

9 / 70

1.3 Trademarks and Copyrights

Microsoft, Windows, Windows Media, Windows Server, Outlook, DirectX, Active Directory, and

DirectShow are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Citrix, ICA (Independent Computing Architecture), MetaFrame, and Program Neighborhood are trademarks or registered trademarks of Citrix Systems, Inc. in the United States and/or other countries.

Crystal Reports and Crystal Enterprise are trademarks or registered trademarks of Business Objects

SA. and/or its affiliates in the United States and/or other countries.

Nuance, Dragon, and NaturallySpeaking are trademarks or registered trademarks of Nuance

Communucations Inc. and/or its affiliates in the United States and/or other countries.

GroupWise, Netware, and Novell are trademarks or registered trademarks of Novell, Inc. and/or its affiliates in the United States and/or other countries.

Lotus Domino and Lotus Notes are trademarks or registered trademarks of IBM Corporation and/or its affiliates in the United States and/or other countries.

Baltech Transponder is a trademark or registered trademark of BALTECH AG and/or its affiliates in the United States and/or other countries.

Inner Media, DynaZip, and Active Delivery are trademarks or registered trademarks of Inner Media

Inc. and/or its affiliates in the United States and/or other countries.

SocketTools is a trademark or registered trademark of Catalyst Development Corporation.

Other company and product names mentioned in this document are trademarks or registered trademarks of their respective owners.

10 / 70

1.4 Supported Devices

For supported devices, consult Help of Dictation Module and Transcription Module of DSS Player Pro R5.

11 / 70

1.5 Contents of the Installation CD

The installation CD automatically starts a launcher.

After the launcher has started, you can install the following applications:

8.3 Starting Dictation Module or Transcription Module Not Allowed

Folder Name Description

DSSProR5

LicenseManager

ManagerTool

Citrix

TerminalService

Manuals

Redist

Folder which consists of Dictation Module and Transcription Module.

Depending on the license key type, one or both Dictation Module and

Transcription Module can be installed.

Folder which contains the License Manager installer.

When building up a workgroup system, it is necessary to install License

Manager.

Folder which contains the System Configuration Program’s installer.

This allows users and updates to be managed for a workgroup system.

Installing System Configuration Program needs the repository (shared folder) setting enabled beforehand.

Folder which contains client drivers for use with Citrix Presentation Server.

This is the driver installation for client PCs when DSS Player Pro is used as an open application in a Citrix Presentation Server environment.

Folder which contains client drivers for the use of a terminal service.

This is the driver installation for client PCs when DSS Player Pro is used as a terminal service application.

Folder which contains Install Guides provided in the individual languages.

Folder which contains components needed for individual modules.

12 / 70

2

System Configuration

While DSS Player Pro R5 can be used on a single PC, it also allows selection of various system configurations depending on network environments and scales.

13 / 70

2.1 Stand-alone System

With this configuration, an individual user enters the supplied license ID (for a single license), installs the system, and configures applications. User profiles (various settings for each user) are located on local PCs and managed by individual users.

Dictation Module or Transcription Module can be installed on a single PC.

As necessary, a shared folder can be created on a network allowing for data to be shared with other people.

The number of users of Dictation Module and Transcription Module can be increased by purchasing a multilicense key separately.

About silent installation with a multi-license ID

Silent installation with a multi-license ID can standardize the settings of multiple users. For information on how to achieve this, refer to “ 6.2 Auto

Distribution by MSI Packages (Silent Installation) ”.

Required License

Dictation Module single license

Transcription Module single license

Modules to be installed

Dictation Module

Transcription Module

14 / 70

2.2 Workgroup System

With this system configuration, an administrator installs and configures the modules for each user, and centrally manages and operates them under a multi-license.

A workgroup system is suitable to build a mid-sized Dictation/Transcription system, which is used by several groups of people. Using System Configuration Program allows user profile management, device setting, and updates management.

For a Citrix Presentation Server or Terminal Service environment, a server-client environment can be built by installing drivers in the servers and clients.

User profiles are placed in a shared folder on the file server. The administrator uses System Configuration

Program to assist each user in configurations and installations. A significant part of the user profile settings can be configured and locked in with System Configuration Program.

This system requires License Manager to be installed to manage the multi-license. Moreover, a multi-license key for Dictation Module or Transcription Module is needed. For a multi-license key, see “ 9 Support

Contacts ”.

Required License

Dictation Module multi-user license

Transcription Module multi-user license

Modules to be installed

Dictation Module

Transcription Module

License Manager

System Configuration Program

15 / 70

3

Preparation before Installation

This section describes the preparation needed before installation.

16 / 70

3.1 Licenses

A license is required to use DSS Player Pro. DSS Player Pro is provided under the following two types of licenses:

Single License

This is the license ID, issued with a recorder or foot switch, that allows single licensing of DSS Player

Pro. A recorder license allows Dictation Module and Transcription Module to be installed on a PC. A foot switch license allows only Transcription Module to be installed on a PC.

Multi-license

This is the combined license ID that groups several single licenses into one license ID for both

Dictation Module and Transcription Module. A multi-license is managed as a floating license.

Decoder License

This is the license for redistribution of DSS and DSS Pro decoders. A redistribution contract allows acquisition of a decoder license ID and redistribution of the decoder. To enable the decoder, the license ID needs to be registered when installing it.

About the multi-license key

With License Manager, only the multi-license key can be registered. The single license and other licenses are not available.

Purchasing an Initial or Additional Multi-license

In exchange for a corresponding number of single licenses, a multi-license is available without charge.

Please see “ 9 Support Contacts ” for contact details.

Other License Keys

DSS Player Pro R5 license keys vary depending on the system.

Use the appropriate license for each system.

See “ 9 Support Contacts ” for information on re-issuance or replacement of a license.

The following table shows the licensing scheme for DSS Player Pro R5 system configurations.

System Name

Stand-alone System

Workgroup System

Required License

Dictation Module single license

Transcription Module single license

Multi-license *1

Dictation Module multi-license

Transcription Module multi-license

License Server

Not required

License Manager

*1 :If not using centralized user management with System Configuration Program and sharing data only, a stand-alone system can be configured under a multi-license (DSS Player Pro R4.10 compatible).

Please see “ 9 Support Contacts ” for contact details.

About purchase of a license key

In exchange for a corresponding number of single licenses, a multi-license is available without charge.

For add-on licenses, product versions need to be purchased separately. Please see “ 9

Support Contacts ” for contact details.

17 / 70

3.1.1 Other License Keys

The licenses needed depending on the server configuration are listed below.

Required licenses differ depending on the system configuration. You can fully use the functions of DSS Player

Pro R5 by purchasing the following licenses and building up proper environments. For the license key purchase method, contact the relevant issuer.

System Name Required License Issuer

Terminal Service

Citrix Presentation

Server

License needed to use a terminal service.

(TS-CAL)

The same amount of licenses needs to be purchased as the number of users accessing the system at any one time.

License needed to use Citrix Presentation

Server.

The same amount of licenses needs to be purchased as the number of users accessing the system at any one time.

Microsoft Corporation

Citrix Systems

18 / 70

4

Installation Methods

You can install DSS Player Pro and the other modules using a CD or Active Directory service.

Installation using a CD needs to be performed on individual PCs.

In cases where Active Directory service is used, distributed installers are automatically started when individual client’s Pcs are started and installation is executed.

For other installers, use CDs for installation.

19 / 70

4.1 Determining the System Configuration

Before installing DSS Player Pro R5, determine the system configuration to be used for the installation.

For the configurable systems, see “ 2 System Configuration” .

After determining the system configuration, confirm the modules to be installed on individual PCs.

System Name Modules to be installed PC needed at least

Stand-alone System

Workgroup System

DSS Player Pro

DSS Player Pro

License Manager

Manager Tool

- System Configuration Program

- Device Customization Program

One or more client PCs

One or more client PCs

One client PC

One or more client PCs

A stand-alone system needs one or more client PCs.

A workgroup system needs a license server PC which manages licenses and a manager PC which manages user profiles and others.

20 / 70

4.2 Installing from a CD

After inserting the CD, the following launcher screen appears:

Select the appropriate button depending on the intended system configuration.

Button name

Language Selection

Installation Guide

DSS Player Pro Installation

Function

Switches languages of programs to be installed.

Starts this Install Guide.

Performs installation for a stand-alone system.

For procedural information, see

“ 4.3 Installation for a Stand-alone System”.

Installation for a Workgroup System

To install a workgroup system, you need to refer directly to the inside of the CD and specify an installation option; you cannot use the launcher.

For details, see “ 5.2 Installing DSS Player Pro for Workgroup Systems ”.

Starting the launcher

If the launcher screen does not appear after inserting the CD, select [My Computer] from Windows’ [Start] menu, click the CD-ROM icon, then double-click “Launcher.exe”.

21 / 70

4.3 Installation for a Stand-alone System

Follow the procedure in “ 5.1 Installing DSS Player Pro for Stand-alone Systems ” to install from the CD.

22 / 70

4.4 Installation for a Workgroup System

The installation procedure for the server and client differs depending on whether performing application sharing through Citrix Presentation Server and Terminal Service or not.

4.4.1 If not performing application sharing

If not performing application sharing, use the following procedure to install:

Procedure

1.

Create a shared folder on the network.

Create a shared folder (repository) on the server connected with the network, so that user profiles can be managed through the folder.

7.1 Repository Setting

2.

Install Manager Tool.

Follow the procedure in “ 5.3 Installing Manager Tool ” to install Manager Tool.

3.

Install License Manager.

Follow the procedure in “ 5.4 Installing License Manager ” to install License Manager.

Installing with the Active Directory service

To automate the installation of Dictation Module and Transcription Module with the

Active Directory service, see “ 6.2 Auto Distribution by MSI Packages (Silent

Installation) ”.

4.

Install Dictation Module and Transcription Module.

Follow the procedure in “ 5.2 Installing DSS Player Pro for Workgroup Systems ” to install.

23 / 70

4.4.2 If performing application sharing

Procedure

1.

Create a shared folder on the network.

Create a shared folder (repository) on the server connected with the network, so that user profiles can be managed through the folder.

7.1 Repository Setting

2.

Install Manager Tool.

Follow the procedure in “ 5.3 Installing Manager Tool ” to install Manager Tool.

3.

Install License Manager.

Follow the procedure in “ 5.4 Installing License Manager ” to install License Manager.

Installing with the Active Directory service

To automate the installation of Dictation Module and Transcription Module with the

Active Directory service, see “ 6.2 Auto Distribution by MSI Packages (Silent

Installation) ”.

4.

Install DSS Player Pro.

Install Dictation Module and Transcription Module on a server PC on which Citrix

Presentation Server or Terminal Service has already been set up.

If you possess a multi-license ID, follow the procedure in “ 5.2 Installing DSS Player Pro for Workgroup Systems ”to install.

5.

Install Citrix/Terminal Service Virtual Driver.

If you intend application sharing, you need to install Virtual Driver on a client PC.

5.7 Installing Citrix/Terminal Service Virtual Driver

24 / 70

5

Procedure for Installing from a CD

Using the CD allows the following programs to be installed:

DSS Player Pro for Stand-alone Systems

DSS Player Pro for Workgroup Systems

Manager Tool

License Manager

Citrix Client Virtual Driver

Terminal Service Client Virtual Driver

For installation from the administration server to a client, see “ 6 Installation Regarding Server

Administrator ”.

25 / 70

5.1 Installing DSS Player Pro for Stand-alone Systems

Use the following procedure to install DSS Player Pro for Stand-alone Systems:

Procedure

1.

In the launcher screen shown after inserting the CD, click [DSS Player Installation].

The installation program automatically starts and Welcome Dialog appears.

2.

Click

License Agreement Dialog appears.

26 / 70

27 / 70

3.

Accept the license agreement, and click [Next].

Customer Information Dialog appears.

4.

Enter a user name, a company name, and a license ID for a stand-alone system, and then click [Next].

Destination Folder Dialog appears.

5.

Specify a program folder for installation, and then click [Next].

Select Basic Setting Dialog appears.

28 / 70

6.

Specify the storage location of the data folder for user information, and then click

[Next].

If you intend shared use of audio data on the PC, check the “All User Settings” checkbox.

Ready to Install the Program Dialog appears.

7.

Check installation settings.

A progress dialog appears during the installation.

When the installation is complete, Complete Dialog appears.

8.

5.1.1 Starting the programs

After restarting, you can launch Dictation Module and Transcription Module from the Start menu using the following procedures:

[All Programs] - [Olympus DSS Player Pro] - “Dictation Module”

[All Programs] - [Olympus DSS Player Pro] - “Transcription Module”

29 / 70

5.2 Installing DSS Player Pro for Workgroup Systems

Use the following procedure to install SS Player Pro for Workgroup Systems:

Procedure

1.

Open DSS Player Pro R5’s folder and execute the following command with an administrator privilege.

Setup.exe /v”SYSTEM=WORKGROUP”

The installer for DSS Player Pro for Workgroup Systems starts.

2.

In the language selection dialog box, select a language to be installed.

The installation program automatically starts and Welcome Dialog appears.

30 / 70

3.

Click

License Agreement Dialog appears.

4.

Accept the license agreement, and click [Next].

Customer Information Dialog for Workgroup System appears.

31 / 70

Enter a user name, company name, License Manager’s server name (or IP address), and port number.

5.

Enter a user name, a company name, and a license ID for a stand-alone system, and then click [Next].

Custom Setup Dialog appears.

32 / 70

6.

Check either Dictation Module or Transcription Module, and then click [Next].

If installing Citrix Server Virtual Driver and Terminal Service Virtual Driver, check the respective checkboxes.

Destination Folder Dialog appears.

7.

Specify a program folder for installation, and then click [Next].

Select Basic Settings Dialog for Workgroup System appears.

8.

Specify the storage location of a data folder for installation, and then click [Next].

For workgroup settings, specify a repository.

Ready to Install the Program Dialog appears.

33 / 70

9.

Check installation settings.

A progress dialog appears during the installation.

A progress dialog appears during the installation. When the installation is completed,

Complete Dialog appears.

10.

Click [Finish].

5.2.1 Starting the programs

After restarting, you can launch Dictation Module and Transcription Module from the Start menu, using the following procedures:

・ [All Programs] - [OLYMPUS DSS Player Pro] – [Dictation Module]

・ [All Programs] - [OLYMPUS DSS Player Pro] – [Transcription Module]

34 / 70

5.3 Installing Manager Tool

Use the following procedure to install Manager Tool:

Procedure

1.

Double-click Setup.exe in the ManagerTool folder.

The installation program for Manager Tool is executed.

2.

Select the language to install in the Choose Setup Language Dialog.

The installation program automatically starts and Welcome Dialog appears.

35 / 70

36 / 70

3.

Click

License Agreement Dialog appears.

4.

Accept the license agreement, and click [Next].

Custom Information Dialog appears.

5.

Enter a user name, a company name, and then click [Next].

Repository location Dialog appears.

6.

Use the [Change] button to specify a folder for repository, and then click [Next].

Ready to Install the Program Dialog appears.

37 / 70

7.

Check installation settings.

A progress dialog appears during the installation.

A progress dialog appears during the installation. When the installation is completed,

Complete Dialog appears.

8.

5.3.1 Starting the programs

After restarting, you can launch the individual modules from the Start menu using the following procedures:

[All Programs] - [Olympus DSS Player Pro] - [Manager Tool]

- “System Configuration Program”

[All Programs] - [Olympus DSS Player Pro] - [Manager Tool]

- “Device Customization Program”

38 / 70

5.4 Installing License Manager

Use the following procedure to install License Manager:

Procedure

1.

Double-click Setup.exe in the LicenseManager folder.

The installation program automatically starts and Welcome Dialog appears.

39 / 70

2.

Click

License Agreement Dialog appears.

40 / 70

3.

Accept the license agreement, and click [Next].

Customer Information Dialog appears.

4.

Enter a user name, company name, Dictation Module’s multi-license ID, and

Transcription Module’s multi-license ID, and then click [Next].

License Server Information Dialog appears.

The license IDs can be updated with the License Manager’s management console after the installation.

5.

Specify an address or PC name, and a port number, then click [Next].

Ready to Install Program Dialog appears.

6.

A progress dialog appears during the installation.

41 / 70

When the installation is completed, Complete Dialog appears.

7.

Click

5.4.1 Starting the programs

After restarting, you can launch the individual modules from the Start menu using the following procedures:

[All Programs] - [Olympus DSS Player Pro] – “License Manager”

42 / 70

5.5 Upgrading Installation

If the PC has DSS Player Pro R4 already installed, you can upgrade it to DSS Player Pro R5 by executing the installer of DSS Player Pro R5 on the PC.

You cannot upgrade from an older version than DSS Player Pro R4 to DSS Player Pro R5.

Also note that upgrading to the Workgroup System version needs a separate license key.

Procedure

Use the following procedure to upgrade to R5:

1.

Start the installer of DSS Player Pro R5.

With DSS Player Pro R4 installed, start the installer of DSS Player Pro R5.

For the installation procedure, see “ 4 Installation Methods ”.

Follow the wizard to proceed.

2.

In the Upgrade Confirmation dialog box, click [Yes].

3.

Follow the wizard to finish upgrading.

To restore DSS Player Pro R4 after upgrading to R5, uninstall R5, and then reinstall R4.

43 / 70

5.6 Installing through the Maintenance Mode

In cases where either Dictation Module or Transcription Module of DSS Player Pro R5 has already been installed, you can additionally install the other one through the maintenance mode.

To install modules in the stand-alone system or workgroup system environment, the modules’ license keys are needed.

For details about license keys, see “ 3.1 Licenses ”.

Procedure

Use the following procedure to install:

1.

From Windows Start menu, select [Control Panel] → [Add/Remove Programs].

2.

Start the maintenance mode of DSS Player Pro.

From the list of “Add/Remove Programs”, select DSS Player Pro, and then click

[Change/Delete].

3.

Start the maintenance mode of DSS Player Pro.

Selecting “Change” causes the installer for maintenance to start.

Follow the wizard to enter the license key and install the module you want to add.

44 / 70

5.7 Installing Citrix/Terminal Service Virtual Driver

For a system where Citrix Presentation Server or Terminal Service has been setup, you may install DSS

Player Pro R5 on a server PC and then install Client Driver on client PCs, so that the applications on the server are shared among multiple clients.

Before installing Client Driver in the client PC, install DSS Player Pro (Dictation Module and Transcription

Module) on the server PC.

The installation procedure differs depending on the server's environment.

You cannot install the Client Drivers of both Citrix Presentation Server and Terminal

Service on the same client PC. Choose and install the appropriate Client Driver depending on the server environment.

For the installation of DSS Player Pro, see “ 4 Installation Methods ”.

5.7.1 When using Citrix Presentation Server

Use the following procedure to set up on a client PC:

Procedure

1.

Uninstall DSS Player Pro.

If DSS Player Pro R5 or R4 has been installed on the client PC, DSS Citrix

Client Driver and Terminal Service Client Driver cannot be installed. Be sure to uninstall DSS Player Pro R5/R4.

2.

Check Citrix Presentation Server Client (Citrix Neighborhood).

Confirm that the client PC has Citrix Presentation Server Client (Citrix Neighborhood) installed.

If not, it has to be installed before continuing.

3.

Install Citrix Client Virtual Driver.

Double-click Setup.exe in the “Citrix” folder on the CD to install.

4.

Execute Dictation Module and Transcription Module.

Start Citrix Presentation Server Client (Citrix Neighborhood), and start the Dictation

Module and Transcription Module.

45 / 70

5.7.2 When using Terminal Service

Use the following procedure to set up on the client:

Procedure

1.

Uninstall DSS Player Pro.

If DSS Player Pro R5 or R4 has been installed on the client PC, DSS Citrix

Client Driver and Terminal Service Client Driver cannot be installed. Be sure to uninstall DSS Player Pro R5/R4.

2.

Install Citrix Presentation Server Client (Citrix Neighborhood).

Confirm that the client PC has Citrix Presentation Server Client (Citrix Neighborhood) installed.

If not, it has to be installed before continuing.

3.

Install Terminal Service Virtual Driver.

Double-click Setup.exe in the “TerminalService” folder on the CD to install.

4.

Execute Dictation Module and Transcription Module.

Connect to the server with Terminal Service, and execute Dictation Module and

Transcription Module on the server.

46 / 70

6

Installation Regarding Server Administrator

This section describes the installation method regarding the Server Administrator.

47 / 70

6.1 User Group Setting

If DSS Player Pro’s users and other uses are present when the network’s user management is performed with Active Directory, we recommend that a user group of DSS Player Pro users is created for management purposes.

For user group settings, see the manual of the relevant operating system.

48 / 70

6.2 Auto Distribution by MSI Packages (Silent Installation)

DSS Player Pro R5 can download software (updates) from the OLYMPUS download server and holds it in its own repository folder.

Normally, like updating through the Internet, the client’s PC searches the repository folder for updates. If the client PC detects an update, it downloads the update data and performs updating according to the user’s instructions. Also, this task can be forcibly performed by a server through auto distribution by MSI packages

(silent installation).

An administrator can forcibly install applications (updates) on client PCs by disclosing MSI, with OS’s group policy setting.

Auto distribution by MSI packages can be performed for users managed through Active Directory, with

Windows Server 2003.

Auto distribution by MSI packages requires the following files:

File Description

DSSPlayer.msi license.dat

DSSPlayer.mst

Installers and updates of Dictation Module and Transcription Module

Installer and updates of Management Module

Multi-license data file of multi-licenses

For the license key purchase method, see “ 9 Support Contacts ” for contact information.

File that defines msi installation options

This can be generated with System Configuration Program.

Only installers and updates of DSSPlayer.msi can be automatically distributed with MSI. Other supplied applications are not capable of this function.

- For the construction and set-up methods of Active Directory, consult Help of your OS

(Windows Server 2003).

- If .mst file is missing, installation is performed with the MSI’s default setting.

Two distribution methods using the Active Directory are available.

Select whichever is appropriate depending on your situation.

49 / 70

6.2.1 If registering applications to be distributed, with a group policy

Use the following procedure to register:

Procedure

1.

Open “Active Directory User and Computer”.

From Window’s Start menu on the server PC, select [Program], [Administration Tool], then “Active Directory User and Computer” to open the administration window.

2.

Create a new organization (OU).

Select and right-click the domain name in the Tree View.

From the menu, select [New], then [Organization unit], enter an organization name (e.g.,

“Distribution”), and then click [OK].

50 / 70

3.

Create a new group.

Select the created organization name (“Distribution”), and then select [New], then

[Group].

Enter a group name (e.g., “Group 1”), and then specify a group range.

Check the group type’s “Distribution” checkbox and then follow the wizard to create a group.

4.

Register group members.

Select the created group (Group1), and then select “Properties” from the context menu.

Select the “Member” tab, and then click [Add] to specify a computer or user to be registered under the group.

5.

Create a new group policy.

Select the created organization name (“Distribution”), and then select “Properties” from the context menu.

Distribution’s property dialog box appears.

51 / 70

6.

In the Property dialog box, select the “Group policy” tab and then create a new group policy object with the [New] button. Open the group policy window with the [Edit] button.

7.

Register software to be automatically distributed.

In the tree, select “Software setting”, then “Software installation”.

In the context menu, select [New], then [Package].

In the file dialog box, select msi to be automatically distributed, and then select

“Allocate” in the software deployment dialog box.

8.

Registration is complete.

Registration is complete. For allocated client PCs, installation is automatically performed during the startup, at the timing set by the group policy.

52 / 70

6.2.2 Registering applications to be automatically distributed, with the log-in script

Use the following procedure to register applications to be automatically distributed with the log-in script:

Procedure

1.

Open “Active Directory User and Computer”.

From Window’s Start menu on the server PC, select [Program], [Administration Tool], then “Active Directory User and Computer” to open the administration window.

2.

Open a user’ property.

Select a “User” folder in the tree view, and from the list, select a user or user group to be distributed to.

Then select [Property] from the context menu to open the user’s property dialog.

3.

Select a user with the Environment tab.

Select the “Environment” tab in the dialog box, and then check “Start the following program when logging on”.

Enter the program’s file name, command option, and the startup directory, and then click

[OK].

Specify the file name and command option as follows: msiexec *****msi /q OPTION1=1 OPTION2=2 etc...

Specifying a command option

For the method for specifying a command option when executing with MSI, see “ 6.3 Installation

Options Regarding MSI ”.

53 / 70

6.3 Installation Options Regarding MSI

The installers that support installation options of DSS Player Pro R5 are as follows:

DSSPlayer.msi

CitrixClientVD.msi

: msi image of Dictation Module / Transcription Module

: msi image of DSS Citrix Client Driver

TerminalClientVD.msi : msi image of DSS Terminal Service Client Driver

6.3.1 Method for specifying installation options

When specifying an install option to install, use one of the following methods:

Specification method Description

Specifying with a command line msiexec /I <msi full path name> SYSTEM=STANDALONE…

By adding options, you can execute installation through application of options from the command line.

Specifying with an MST file

Specifying with Setup.ini

You can specify an option with an MST file generated with System

Configuration Program. msiexec /I <. msi full path name > TRANSFORMS= < msi full path name >

For the method for generating an MST file, see System

Configuration Program Help.

Adding options to the [Startup] section with Setup.ini causes options to be automatically applied when installation is executed.

Example:

[Setup]

SYSTEM=STANDALONE

:

6.3.2 Installation option list regarding DSSPlayer.msi

The table below provides the list of installation options available through the installer of DSS Player Pro R5.

The MSI’s installation options are described with “option name = value”.

Option

USER

COMPANYNAM

E

LICENSE

Value

WORKGROUP }

User name set on the PC

Company name set on the

PC

License file name

Description

Select a system type to be installed.

Specify a user name for installation.

Specify a company name for installation.

System

Stand-alone

Workgroup

Stand-alone

Workgroup

Stand-alone

Workgroup

Stand-alone

CITRIXSVD INST

TERMINALSVD INST

Specify a license file name for installation.

Specify this option when installing as an open application in a Citrix Presentation Server environment.

Specify this option when installing applications on the server with Terminal Service.

Stand-alone

Workgroup

Stand-alone

Workgroup

54 / 70

SETTING

LM

DCT destination specifying an application installation destination.

If not specified, the applications are installed in the %Program

Files%\Olympus\DSS Player Pro folder.

{ INDIVIDUAL | ALLUSER } Specify whether the environment setting and audio data are to be applied according to each PC user who logs in or they are to be shared among all users.

License manager name number

(Default: 80)

INST

Specify the PC that has License

Manger installed.

Specify an HTTP port number.

DM INST

Specify this option when installing Direct Configuration

Tool.

Without “DM=INST” selected, installation is not performed.

Specify this option when installing Dictation Module.

TM INST Specify this option when installing Transcription Module.

Specify with \\{repository’s PC name}\{repository’s folder name}

Stand-alone

Workgroup

Stand-alone

Workgroup

Workgroup

Workgroup

Stand-alone

Workgroup

Stand-alone

Workgroup

Stand-alone

Workgroup

Workgroup

6.3.3 Installation option list regarding DSS Citrix Client Virtual Driver

Option Value

DEST Application destination

Description

Specify this option when specifying an application installation destination.

If not specified, the applications are installed in the %Program

Files%\Olympus\CitrixClientVD folder.

System

Stand-alone

Workgroup

55 / 70

6.3.4 Installation option list regarding DSS Terminal Client Virtual

Driver

Option Value

DEST Application destination

Description

Specify this option when specifying an application installation destination.

If not specified, the applications are installed in the %Program

Files%\Olympus\ TerminalClientVD folder.

System

Stand-alone

Workgroup

6.3.5 Specification examples of installation options

The following are specification examples of installation options:

When installing Work Group System’s Dictation Module with the command line msiexec /i DSSPlayer.msi SYSTEM=WORKGROUP LICENSE=LICENSE.DAT DCT=INST DM=INST

REPOSITORY=\\ShareServer\Repository

When installing Work Group System’s Transcription Module with an MST file generated with System Configuration Program msiexec /i {Full path} DSSPlayer.msi TRANSFORMS={Full path } DSSPlayer.mst

If you specfy an MSI or MST file in the command fine,give the full path.

56 / 70

7

Other Matters

This section provides reference information.

57 / 70

58 / 70

7.1 Repository Setting

For Workgroup System, a shared folder which is called a repository needs to be created. The shared folder is managed with a management tool and is used to store profiles and updates.

Note for repository setting

A repository folder will contain the profiles of all users and module updates, so specify a drive that has a sufficient amount of empty space.

7.1.1 Repository setting procedure

Use the following procedure to set a repository:

■ Procedure

1.

From the Windows’ menu, select [Start], and then right-click [My Computer].

2.

Form the context menu, select “Manage” to open the computer’s management tree.

3.

From the computer’s management tree, select “System tool”, “Shared folder”, then

“Share”.

4.

From the computer’s management menu, select [Action] then [New Share].

5.

Open "Share a Folder” wizard, and then click [Next].

6.

Enter the name of a shared folder, and then click [Next].

7.

For the access privilege, check the [Use custom share and folder permissions] checkbox, and then click [Customize].

8.

For the access privilege, assign read and write privileges to DSS Player Pro R5 users.

9.

Click [Finish] to complete the setting.

59 / 70

7.2 How To Open a Port of the Firewall

In cases where the firewall is managed with the Active Directory’s group policy, the firewall has to be set on the server. For networks not managed with Active Directory, settings have to be made on each individual PC.

When creating settings with the Active Directory service’s group policy

■ Procedure

1.

From the Windows’ Start menu, select [Control Panel], [Network and Internet

Connections], then “Windows Firewall”.

2.

Click the “Exception” tab, and then click [Add port].

3.

Set the name, TCP/UDP, and port number of the exception port.

When creating settings on client PCs

■ Procedure

1.

From the Windows’ Start menu, select [Control Panel], [Network and Internet

Connections], then “Windows Firewall”.

2.

Click the “Exception” tab, and then click [Add port].

3.

Set the name, TCP/UDP, and port number of the exception port.

60 / 70

8

Troubleshooting

Read this section when you encounter any problems.

61 / 70

8.1 Launcher Not Starting

When inserting the CD, if the launcher does not start, it means that the auto start CD setting has not been made.

Use the following procedure to manually start the launcher.

■ Procedure

1.

In the Windows’ Start menu, select [My Computer], and then open the CD-ROM drive.

2.

Open the “DSSProR5” folder in the CD, and then double-click “Launcher.exe”.

How to make auto start CD work

To make auto start of CD work for the next time, make the following setting:

■ Procedure

1.

From the Window’s Start menu, select [Run], and then enter “GPEDIT.MSC”.

2.

In the Group Policy, select “Local computer policy”, “Management template”, then

“System”, and then select “Disable auto play function”.

3.

Right-click the CD and select “Property” in the context menu.

4.

Select “Enable” in the dialog, and then click [OK].

62 / 70

8.2 In cases where the default port number has already been used by IIS or others

When installing a workgroup system, the standard port number may have already been used by IIS

(Internet Information Service) or others.

If this is the case, specify a port number other than the standard port numbers (for HTTP, 80; for HTTPS,

443) during installation.

If specifying another port number, be sure to open the specified port number through the firewall setting on the OS.

63 / 70

8.3 Starting Dictation Module or Transcription Module Not

Allowed

After Dictation Module and/or Transcription Module have been installed, they can be used for 60 days without connection to the license server. However, if 60 days passes without connection, they cannot be started.

The server administrator needs to check that settings regarding connection to the license sever, the license server name, port number, firewall settings, and others are appropriate.

64 / 70

9

Support Contacts

For Purchasing License Keys

To purchase the following license keys, please contact your dealer or distributor.

Dictation Module multi-license key

Transcription Module multi-license key

Asking about Malfunctions

When submitting a query, the information below needs to be provided to our support staff along with the details of your problem. Please keep the following data handy.

Type of PC (manufacturer and model)

Amount of memory

Hard disk space

Name and version of the OS

Connected peripheral devices

For assistance in solving a problem such as a malfunction, please contact your dealer or distributor.

Please note that it may take a some time to answer your query, depending on our investigations.

Other Support

Various types of information, including product specifications, PC connections, support for OSes, and FAQs, is available on our Web site. For the latest information, please visit the Olympus Web site at http://www.olympus-global.com/en/global/ .

These descriptions are subject to change.

65 / 70

1 0

Glossaries

Backup

With a folder configured for backup, the audio files dropped into that folder can be automatically backed up to a specified folder.

Citrix Presentation Server

A client/server system that allows a shared server application to be started from multiple client

OSes including Windows, Macintosh, and Linux.

Clean

A folder attribute and a way to delete files. Old files can be deleted through one of two methods: by directly deleting them or by moving them to the Recycle Box and then deleting them with the delete option of the box. Setting the Clean attribute enables automatic cleanup of old files.

Composite Mode

This mode supports multiple device classes. Recorders support the Audio and HID classes (note that DS-5000 supports the Audio, HID, and Storage classes).

Direct Record

A recording method that records audio data directly onto the hard disk drive in a PC with a connected DirectRecording device. DR-1000 and DR-2000 are the devices specialized for direct recording. Some DVR models also support direct recording.

DRM

This stands for Digital Rights Management. It is a general term for the technologies that protect the copyrights of digitally-created contents and regulate the use and replication of them.

DSS

This stands for Digital Speech Standard.

This voice encoding standard has been developed by Olympus and two other companies. It can downsize audio data while maintaining sound quality. All of Olympus recorder models support

DSS. DSS-compliant audio files have the "DSS" extension.

DSS Pro

An audio standard enhanced from the classic DSS.

Key differences from the DSS standard include QP (Quality Play) mode for high-grade recording, an increase from 16 to 32 in the number of settable index marks, support for audio file encryption, and support for verbal comment recording. DSS-compliant audio files have the

"DS2" extension.

FTP

This stands for File Transfer Protocol. This is a protocol used for transferring a file over the

TCP/IP network.

Hot Key

A function that allows an application's operation or a button operation on the device to be assigned to a key on the keyboard and to be executed simply by pressing the key. It can be

66 / 70

67 / 70 customized and enables the user to work more efficiently by registering frequently used functions.

HTTPS

A protocol that integrates SSL (Secure Sockets Layer) encrypted communication into HTTP.

Instruction Comment

An Instruction Comment is an instruction or other message recorded for a Transcriptionist. It can be recorded only with DirectRecord and cannot be created when making a recording with a standalone recorder. It is maintained as a file separately from an audio file and is recorded to provide a Transcriptionist with instructions.

Job Data

A collective term for several basic settings, e.g. Author ID, Worktype, Option Items, and

Comments.

By centrally managing these settings as Job Data on the application side, each dictation can be edited and configured more easily.

Noise Cancel

An operation that reduces noise output by extracting and filtering out noise components from an audio file. The cancellation effect can be adjusted to three different levels.

MP3

An MPEG-1-based audio compression method. Like other major audio compression techniques, it uses a lossy compression method that achieves a high compression rate by deducting less audible portions from sound data. DSS Player supports it only for playback. The file extension is .MP3.

MSI Package

A Windows Installer-compliant package for installation. DSS Player Pro R5 executes the MSI packages of modules when performing installations and upgrades.

OLE

When dragging and dropping an audio file to a document file, it can be configured to be an embedded object or a linked object.

An embedded object brings all audio data into the file, resulting in a larger amount of data, while the file with audio data embedded can be played on another PC that has DSS Player installed. A file linked with audio data only retains the file name and path of the audio file, resulting in a smaller amount of data, while the file may not be able to be played if it cannot refer to the audio data path.

Option Item

An item associated with a Worktype. Up to 10 items can be registered with combinations of values.

Option Items can be input with such tools as Baltech Transponder and a barcode reader.

Ownership

An attribute that, based on an Author's privilege, prevents an audio file from moving to the

Finished folder in Transcription Module after the file has been transcribed. It inhibits audio files from automatically moving to the finished folder of Transcription Module just when transcription is finished.

68 / 70

Priority Level

This is represented by the 16 priority levels of 0 to 15, and allows the user to prioritize dictations.

Proxy

This is a boundary that separates an internal network from the external Internet. It is a computer or software that connects to the Internet on behalf of an internal computer that cannot directly access the external network. A proxy centrally controls the access traffic between the Internet and the internal network, and blocks unauthorized accesses.

Repository

A hierarchically structured database that stores shared data managed by System Configuration

Program. It stores user profiles, profiles of groups, and Update information.

Stand-alone System

The basic system of DSS Player Pro R5. It represents a system environment in which Dictation

Module and Transcription Module run on local PCs and management tools such as System

Configuration Program are not used.

Storage Mode

In this mode, the device is recognized as large storage media when connected to a PC.

The memory or memory card installed in the recorder is recognized as a removable drive, and the files stored there can be accessed like those on a hard disk drive.

Terminal Service

This is a client service provided by Windows Server. It can execute applications and services provided by the server on the client side. A separate license such as TS-CAL is required to use this function.

VCVA

A capability that enables sound-initiated recording (called Variable Control Voice Actuator) in order to improve usability and efficiency for prolonged recording. It halts recording after a certain period of silence and resumes it in response to sound. The sound level to initiate recording can be adjusted. A level setting optimized for a recording environment ensures efficient recording. For recording intended for voice recognition, it is recommended to disable the VCVA function.

Verbal Comment

A voice comment that is embedded in audio file data. A verbal comment can be recorded with a supported recorder. It is provided to transcribe audio data immediately after commentary. A verbal comment is recorded at any position in an audio file based on the need for instructions.

WAV

A standard audio file format for Windows. It is also referred to as the WAVE format. The specifications include the saving format for recording a digitally converted audio signal. The file extension is .WAV.

WMA

A standard audio format for Windows. This technology is a component of Windows Media, a multimedia technology incorporated in Windows, and is a standard audio compression technique. The file extension is .WMA.

69 / 70

Workgroup System

The middle-class system of DSS Player Pro R5. It represents a multi-user system environment in which multiple licenses are managed by License Manager and user settings can be maintained with System Configuration Program.

Worktype

This is the data used to classify dictations. The user can classify the types and Authors of dictations with the application by selecting a Worktype on the recorder when making a new recording.

Using Option Items associated with a Worktype, additional attributes can be provided.

Copyright © 2008 OLYMPUS IMAGING CORP.

advertisement

Key Features

  • Supports various sizes of assignments
  • Captures audio data highly compressed
  • Real-time playback, editing, and index insertion
  • Supports DSS, WMA, and MP3 playback
  • Provides a variety of additional functions
  • Supports Terminal Service
  • Supports Citrix Presentation Server
  • Easy-to-see and intuitive graphical user interfaces
  • Option dialog boxes allow centralized management of settings
  • Button customization to link device buttons with commands

Frequently Answers and Questions

What are the system configurations of DSS Player Pro?
DSS Player Pro offers two system variants with different administrative configurations: Stand-alone System and Workgroup System.
What are the operating conditions for DSS Player Pro R5?
The supported operating systems are Microsoft Windows 2000 Professional Operating System SP4, Microsoft Windows XP Professional Edition SP2 / Home Edition SP2, Microsoft Windows XP 64-bit Professional Edition SP2 / Home Edition SP2, Microsoft Windows Vista Ultimate / Enterprise / Business / Home Premium / Home Basic, Microsoft Windows Vista Ultimate 64-bit edition / Enterprise 64-bit edition / Business 64-bit edition / Home Premium 64-bit edition / Home Basic 64-bit edition, Microsoft Windows Server 2003 Operating System, Microsoft Windows Server 2003 Operating System x64 edition.
What are the supported languages for DSS Player Pro R5?
The supported languages are English, French, German, Italian, Spanish, and Russian.

Related manuals