Man & Machine Simply Cool keyboard User manual
Below you will find brief information for keyboard Simply Cool. The Simply Cool keyboard is a full-size, water-resistant and contaminant proof keyboard with tactile feedback keys. The Simply Cool is value priced for industrial, marine, and medical use, as well as other applications where moisture and cleaning are a consideration. Because the Simply Cool is also quieter than "standard" keyboards, they are great for applications where noise generated from "key-clicks" is a problem. The Simply Cool is compatible with standard keyboard layouts and drivers are not needed.
advertisement
◉
Touch to zoom
SSiim mppllyy CCooooll KKeeyybbooaarrdd Cleaning Instructions for Waterproof Keyboards and Mice: • Clean the surface of the product by wiping, brushing, spraying or dipping it. Use only rags, sponges or soft bristle brushes. The Simply Cool is a full size water-resistant and contaminant proof DO NOT place the USB or PS/2 connector into the fluid. keyboard with tactile feedback keys. This sealed and rigid surface • Either wipe with dry cloth or allow to air dry. keyboard is value priced for industrial, marine, and medical use, as well as other applications where moisture and cleaning are a consideration. Because the Simply Cool is also quieter than "standard" keyboards, they Cleaning Instructions while the keyboard is plugged in: • Lock the keyboard by pressing both Left and Right Control keys are great for applications where noise generated from “key-clicks” is a for about three seconds. After you finished cleaning press both problem. The Simply Cool is compatible with standard keyboard layouts Left and Right Control keys for 3 seconds to unlock the keyboard. and drivers are not needed. Weight: 473.0 g (1.0 lb.) Dimensions: 381 mm x 135 mm x 10.0 mm 15” x 5.3” x 0.4” Cable length: 1.83 m (6’) Storage temperature: -20 °C - 70 °C -4 ° F - 158 °F Operating temperature: 0 °C - 70 °C 32 °F – 158 ° F Voltage: 5 Volt Current input: 26 mA Composition: 100% Silicone Rubber PVC Cable 100% Latex free System requirements: USB interface ( Not Compatible with PS/2) Number of keys: 104 US Layout keys with keypad. Warranty period: One year replacement warranty. Specifications subject to change without notice Installing Your Simply Cool Keyboard: USB: Attach the keyboard cable to a USB computer port. (You do not have to turn off your computer. There is no software to install.) You can email us at: [email protected] or call us at: (301) 341-4900 In Europe, contact +31-23-5450185 www.man-machine.com Disinfectants recommended by Man & Machine, Inc.: • Chlorine based (max 10% solution) – Chlorox, Novalsan, etc. • Formaldehyde based - Formaldehyde Solution 37%, Vinco Formaldegen, etc. • Glutaraldehyde based – Aldacide 200, Lysofume, Wavicide, etc. • Phenol based – Lysol I.C., Beaucoup, Magna Clean, Tek-Trol, etc. • Alcohol based – Cavicide, Isopropyl Alcohol, Medicide, etc. • Oxidizing – Hydrogen Peroxide 3% Solution, Lifegard Series, etc. • Quaternary Ammonium – Roccal-D, Bacto-Sep, Parvosol, etc. • Soap and water DO NOT USE: • Petroleum based cleaning fluids, such as Gasoline • Acetone • Over 10% bleach solutions • Temperature or pressure sterilization • Buffing pads or scrubbing pads THESE INSTRUCTIONS AND RECOMMENDATIONS HAVE BEEN PREPARED TO ADVISE THE PROPER METHODS FOR CLEANING YOUR PRODUCT. MAN & MACHINE, INC. OR THE LOCAL DISTRIBUTOR CANNOT ASSUME ANY RESPONSIBILITY FOR THE APPLICATION OF THEM. IF THERE ARE ANY QUESTIONS, PLEASE CONTACT PLACE OF PURCHASE OR MMI PRIOR TO CLEANING. Copyright Man & Machine, Inc. 2008
advertisement
Key Features
- Water-resistant
- Contaminant proof
- Tactile feedback keys
- Quiet operation
- Compatible with standard keyboard layouts
- USB interface
- One year warranty
Frequently Answers and Questions
How do I clean my Simply Cool keyboard?
To clean your Simply Cool keyboard, you can wipe it with a dry cloth, spray or dip it in cleaning solution, or allow it to air dry. Make sure to avoid placing the USB or PS/2 connector into any liquid.
What type of cleaning solution is safe to use on my Simply Cool keyboard?
You can use chlorine-based, formaldehyde-based, glutaraldehyde-based, phenol-based, alcohol-based, oxidizing, quaternary ammonium-based, or soap and water cleaning solutions.
What type of cleaning solution is not safe to use on my Simply Cool keyboard?
Avoid using petroleum-based cleaning fluids, acetone, bleach solutions over 10%, temperature or pressure sterilization, buffing pads, or scrubbing pads.
What are the system requirements for the Simply Cool keyboard?
The Simply Cool keyboard requires a USB interface and is not compatible with PS/2.
How do I install my Simply Cool keyboard?
To install your Simply Cool keyboard, simply attach the keyboard cable to a USB computer port. You do not need to turn off your computer and there is no software to install.
Related manuals
Download
PDF
advertisement