Intronics | DX253 | Datasheet | Intronics DX253 cable network tester

256300 Hobbes PoEfinder™
PoE (Power over Ethernet) technology is
increasingly being used in many network
equipments such as: IP phone, Access Points,
Network Hubs, Network Cameras, and many
other types of equipment.
Hobbes has announced a new and easy to use
tool for professional network administrators
and installers in identifying the existence of PoE
in a matter of a second! You simply connect the
POEfinder to an active network and the
POEfinder will “light up” when it detects the
voltage from the existing network. It will identify
the type of PSE (power sourcing equipment)
• Check the existence of PoE in a second.
• Identifies the type of PSE, whether the PoE
Voltage is detected on the pair 12-36 (Endspan),
or on the 45-78 (Midspan).
• Compliant with IEEE802.3af standard.
• Compact design, easy to plug and read.
• The POEfinder is designed with both jack
and plug, so no extra cable is needed.
• Easy to read with indicators on both sides.
Indications Two LEDs indicate the PoE voltage (48V) is detected on pair 12-36, or 45-78
Connectors 8 Pin modular jack and plug
Voltage detected IEEE802.3af standard, and unsolicited voltage> 24VDC on pair 12-36, or 45-78
Voltage protection 63VDC
Order information
Hobbes PoEfinder™
Download PDF