Fujitsu PRIMERGY SX960 S1 Datasheet

Add to my manuals
5 Pages

advertisement

Fujitsu PRIMERGY SX960 S1 Datasheet | Manualzz

Data Sheet Fujitsu PRIMERGY SX960 S1 Storage Blade Disk

Data Sheet

Fujitsu PRIMERGY SX960 S1 Storage Blade Disk

Simple and low-priced direct-attached and shared-storage solution for PRIMERGY BX Blade Servers

PRIMERGY SX storage blades are installed together with PRIMERGY server blades in the PRIMERGY BX chassis. The introduction of storage blades is a simple and low-priced way to consolidate servers.

Above all, small and medium-sized companies usually have rack and tower servers which offer a high degree of capcity regarding local hard disks.

The use of storage blades equipped with tape drives is a simple and quick method to backup system data locally. Having local access to large amounts of data is often necessary, for example, in the world of computer-aided engineering

(CAE), where smaller local workgroups have to access and create very large models. Examples for using storage blades are operation within limited environments as a file server or for Microsoft®

SharePoint portals.

PRIMERGY SX960 S1

The Fujitsu PRIMERGY SX960 Storage Blade offers direct-attached and shared-storage for the

PRIMERGY BX Blade Server with support of up to

10 hot-plug SAS or SATA hard disks. The storage blade can be inserted, like a server blade, in the front of the blade server housing. It can be hot-plugged and used with various types of server blades. The BX Blade Server midplane offers a PCI

Express connection to the adjacent server blades, enabling top-quality memory access without using additional cables. The PRIMERGY SX960 Storage

Blade has an onboard MegaRAID controller with

512 MB Battery Backed Write Cache, for top performance and data security.

blades in the PRIMERGY BX400. This virtual storage solution consists of a storage control blade with an installed Hypervisor plus the Data ONTAP-vTM software from NetApp and a PRIMERGY SX960

Storage Blade which provides the shared storage capacity. The PRIMERGY VSX960 is completely integrated in the ServerView Appliance and supports up to 10 hard disks in a RAID array.

The ServerView Installation Manager ensures a simple installation option directly on the customer premises. The VSX storage solution supports iSCSI, CIFS and NFS protocols and supports Data

ONTAP-vTM functions, such as Snapshot, FlexVol,

SnapRestore and FilerView.

Use NetApp Data ONTAP-vTM software to convert the PRIMERGY SX960 Storage Blade into a SAN within the PRIMERGY BX housing. The so-called

PRIMERGY VSX960 is a flexible solution which provides a shared-storage drive for all other server

Page 1 / 5 http://ts.fujitsu.com/Primergy

Data Sheet Fujitsu PRIMERGY SX960 S1 Storage Blade Disk

Features and Benefits

Main Features

Operational diversity

„ PRIMERGY SX960 S1 supports up to 10 hot-plug SAS or SATA hard disks with a half-height and double-wide form factor.

Shared storage

„ PRIMERGY VSX960 uses NetApp Data ONTAP-v software in order to convert the PRIMERGY SX960 storage blade into a SAN within the

PRIMERGY BX400.

„ A flexible solution providing a shared-storage drive for all other server blades in the blade server housing.

Fast interconnect

„ Midplane connection via PCIe x4 interface

Benefits

„

„

High capacity with up to 5 TB SATA HDDs, 3 TB with top-quality

2.5-inch SAS drives and up to 640 GB with power-saving 2.5-inch

SATA SSDs.

The Virtual Storage Solution offers an optimal, easy-to-handle datacenter-in-the-box solution which is ideally suitable for mediumsized customers.

„ Avoidance of additional cabling due to the direct connection to

Server Blade(s) via the high performance midplane, no need for additional disk controller slots in Server Blade(s)

Enhanced speed plus secure data transmission

„ High-performance RAID controller within the storage blade, secured for RAID levels 0, 1, 5 and 6, with 512 MB cache module with ECC and with BBU.

„ The write-back cache comprehensively enhances the speed of write operations and in the event of power failures, the integrated

Battery Backup Unit guarantees data integrity.

Page 2 / 5 http://ts.fujitsu.com/Primergy

Data Sheet Fujitsu PRIMERGY SX960 S1 Storage Blade Disk

Technical details

Enclosure

Type

Number of hard disk drives

Storage architecture

Status LEDs

Hard disk drives

RAID Controller

Dimensions / Weight

Dimensions (W x D x H)

Weight

Weight notes

Environmental

Temperature note

Operating environment

Operating environment Link

Power supply configuration

Active power (min. configuration)

Active power (max. configuration)

Heat emission

Compliance

Germany

Europe

USA/Canada

Global

Japan

Taiwan

Storage extension unit for BX92x and BX96x Server Blades

1 - 10

Direct Attached Storage (DAS)

Power (green)

Identification (blue)

SSD SATA, 3 Gb/s, 64 GB, SLC, hot-plug, 2.5-inch, enterprise

SSD SATA, 3 Gb/s, 32 GB, SLC, hot-plug, 2.5-inch, enterprise

HDD SATA, 3 Gb/s, 500 GB, 7200 rpm, hot-plug, 2.5-inch, business critical

HDD SATA, 3 Gb/s, 320 GB, 5400 rpm, hot-plug, 2.5-inch, economic

HDD SATA, 3 Gb/s, 160 GB, 7200 rpm, hot-plug, 2.5-inch, business critical

HDD SATA, 3 Gb/s, 160 GB, 5400 rpm, hot-plug, 2.5-inch, economic

HDD SAS, 6 Gb/s, 300 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise

HDD SAS, 6 Gb/s, 146 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise

HDD SAS, 6 Gb/s, 146 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise

HDD SAS, 6 Gb/s, 73 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise

HDD SAS, 3 Gb/s, 300 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise

HDD SAS, 3 Gb/s, 146 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise

HDD SAS, 3 Gb/s, 146 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise

HDD SAS, 3 Gb/s, 73 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise

Integrated RAID 5/6 Ctrl., HDD SAS 6 Gb, Fujitsu , 8 ports int.

RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache, optional BBU (based on LSI SAS2108)

90 x 508 x 204 (chassis height 210,5) mm max. 8 kg (fully equipped)

Actual weight may vary depending on configuration

In accordance with the corresponding PRIMERGY BX400 system unit

FTS 04230 – Guideline for Data Center (installation locations) http://docs.ts.fujitsu.com/dl.aspx?id=e4813edf-4a27-461a-8184-983092c12dbe

70 W

110 W

396.0 kJ/h (375.3 BTU/h)

GS

CE Class A *

CSA us

CSA c

CB

RoHS (Restriction of hazardous substances)

WEEE (Waste electrical and electronical equipment)

VCCI

BSMI

Page 3 / 5 http://ts.fujitsu.com/Primergy

Data Sheet Fujitsu PRIMERGY SX960 S1 Storage Blade Disk

Compliance

Compliance notes

Compliance link

In combination with corresponding PRIMERGY BX system unit

There is general compliance with the safety requirements of all European countries and North America. National approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.

* Warning:

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

https://sp.ts.fujitsu.com/sites/certificates/default.aspx

Page 4 / 5 http://ts.fujitsu.com/Primergy

Data Sheet Fujitsu PRIMERGY SX960 S1 Storage Blade Disk

More information

Fujitsu platform solutions

In addition to Fujitsu PRIMERGY SX960 S1,

Fujitsu provides a range of platform solutions.

They combine reliable Fujitsu products with the best in services, know-how and worldwide partnerships.

Dynamic Infrastructures

With the Fujitsu Dynamic Infrastructures approach, Fujitsu offers a full portfolio of IT products, solutions and services, ranging from clients to datacenter solutions, Managed

Infrastructure and Infrastructure as-a-

Service. How much you benefit from Fujitsu technologies and services depends on the level of cooperation you choose. This takes IT flexibility and efficiency to the next level.

Computing Products www.fujitsu.com/global/services/computing/

Software www.fujitsu.com/software/

More information

Learn more about Fujitsu PRIMERGY SX960

S1, please contact your Fujitsu sales representative or Fujitsu Business partner, or visit our website.

http://ts.fujitsu.com/Primergy

Fujitsu green policy innovation

Fujitsu Green Policy Innovation is our worldwide project for reducing burdens on the environment.

Using our global know-how, we aim to resolve issues of environmental energy efficiency through IT.

Please find further information at http://www.

fujitsu.com/global/about/environment/

Copyrights

All rights reserved, including intellectual property rights. Changes to technical data reserved. Delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded.

Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner.

For further information see http://ts.fujitsu.

com/terms_of_use.html

Copyright © Fujitsu Technology Solutions

Disclaimer

Technical data are subject to modification and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner

Contact

FUJITSU LIMITED

Mies-van-der-Rohe-Straße 8

80807 München

Germany

Website: www.ts.fujitsu.com

2011-02-02 CE-EN

Page 5 / 5

All rights reserved, including intellectual property rights. Changes to technical data reserved. Delivery subject to availability.

Any liability that the data and illustrations are complete, actual or correct is excluded.

Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner.

For further information see http://ts.fujitsu.com/terms_of_use.html

Copyright © Fujitsu Technology Solutions http://ts.fujitsu.com/Primergy

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Questions and Answers

What type of Storage Solution is this?
It is a direct-attached and shared-storage solution.
What type of interface does it use to connect to server blades?
It uses a PCIe x4 interface.
How many hard disk drives can it hold?
It can hold up to 10 hot-plug SAS or SATA hard disk drives.
What type of RAID levels does it support?
It supports RAID levels 0, 1, 10, 5, 50, 6, 60.
Does it have an integrated RAID controller?
Yes, it has an integrated RAID 5/6 Ctrl., HDD SAS 6 Gb, Fujitsu, 8 ports int.
What is the maximum cache size for the RAID controller?
The maximum cache size is 512 MB.
Does it support hot-plugging of hard disk drives?
Yes, it supports hot-plugging of hard disk drives.
What is the maximum capacity of storage?
The maximum capacity is 5 TB SATA HDDs, 3 TB with top-quality 2.5-inch SAS drives and up to 640 GB with power-saving 2.5-inch SATA SSDs.
What is the maximum active power consumption?
The maximum active power consumption is 110 W.
What is the weight of the device when fully equipped?
The weight is a maximum of 8 kg when fully equipped.

Related manuals

Download PDF

advertisement