Tried, tested, perfected!

Tried, tested, perfected!
TM
TM
REMOTE
CONTROLS
INTERCOMS
SAFETY BEAMS
KEYPADS
TH AFRIC
OU
IN
N
GARAGE DOOR
MOTORS
A
SLIDING GATE
MOTORS
SWING GATE
MOTORS
AS
Tried,
tested,
perfected!
ITIATIVE
TM
They say you can't improve upon perfection. Well,
they obviously haven't seen the D5-Evo.
One of the most durable and reliable motors ever
made, the legendary D5 is renowned the world over.
Many years later, old 'tried and tested' gets perfected.
We borrowed what we learned from the D10 and
applied it to the D5-Evo.
TM
Incorporating a 12V version of the D10 controller, the
D5-Evo also offers a wide range of useful features,
which includes ChronoGuard timer functionality (a
world first).
Faster, smarter and easier to set up, old faithful even
got a facelift and now looks more like his D10 cousin.
Hard as nails and loyal to the end, you can sleep
easy, knowing that our D5-Evo is on guard.
You can even enjoy the amazing features and
functionality of our flagship motor if you don't have
mains power at your gate - thanks to the D5-Evo
Low-Voltage. Simply connect a transformer to this
cost-effective model's included rectifier, and enjoy the
freedom of fully DIY gate automation! No expensive
high-voltage cable runs, no costly isolators, no sweat!
Main features
Battery backup
We pioneered power failure protection in gate motors. So in line with all our other motors, the
D5-Evo carries on guarding your entrance even when the lights go out.
All important speed
The original D5 made a mark for itself being a quick motor, opening the gate swiftly when you
arrive at your entrance. The D5-Evo is now that little bit faster, opening your average four
metre gate in less than twelve seconds, adding even more security and convenience.
Fast
Slow
Open it the way you like it...
Rapid opening but a more tempered closing just in case a loved one is in the way, that’s the
sort of sophistication in motor control you can expect from the D5-Evo. Added to this, you can
vary the acceleration and deceleration of your gate and make it move so smoothly it will do so
for many years to come.
Pushes like a mule
Such a compact package but such a potent push force, it will reliably move almost any gate
weighing up to 500kg and do it for a very long time.
Wide awake all the time!
Incorporating the tried and tested DOSS position control system of its predecessors, the D3
and D5, the D5-Evo moves open and closed accurately, stopping in just the right spot each
and every time. It’s also wide awake to any obstruction that might cross its path, ensuring safe
and sensitive anti-crushing protection.
It will turn heads
The D5-Evo takes on a new and more attractive look compared to the original D5.
It’s nice to know that even your trusty gate guard will turn heads.
Plug and play
The LCD-based controller makes child’s play of setting up the gate.
It is literally plug and play - the D5-Evo’s controller does all the thinking for you.
It’s got it all
Feature
Feature
Feature
Feature
Feature
A
B
C
D
E...
What a pleasure to click through an almost endless list of really useful features - from multiple
Modes of Operation, gate operating parameters, Pillar Light control with Pre-flash, Alarm
functions, Positive Close Mode and Real Time Clock and Calendar to enable time-based
features - to helpful diagnostic feedback. It just stops short of making the coffee!
Forever yours
WARRANTY
We know that this compact companion will serve
you well - year, after year, after year. So just like all
other CENTURION products, your beautiful
D5-Evo motor also comes with an industry-leading
24 month warranty for added peace of mind.
Alarm features (a world first)1
Burglars have some nifty techniques to get into your
home. Fortunately, criminals can't outsmart the
D5-Evo. An Ambush Alarm will alert your security
company if the opening or closing beams are
interrupted for a predefined, but adjustable,
time. Similarly, a Break-in Alarm will go off if
the closing beam outside your house is
interrupted. Their gig is up.
1. Requires Infrared Safety Beams to be installed
SLIDING GATE
MOTORS
Operate wirelessly, thanks to
2
CENTURION
Besides its code-hopping technology offering the
highest level remote control security, this
multichannel and multi-user CENTURION onboard
receiver allows for a multi-button remote to operate
any combination of the system inputs, such as Gate
trigger, Pedestrian opening, Holiday Lockout, etc.
It stores up to 500 transmitter buttons, and amongst
other access control features, it provides the ability
to selectively add and delete transmitter buttons
saved into its memory.
2.CENTURION code-hopping technology
D5-Evo controller features
Hardware features






Fully-sealed plastic housing for controller to prevent ingress of dirt and insects
Easy setup of controller using LCD user interface
Removable connectors on controller for easy maintenance
Watchdog IC ensures full and safe operation of controller
Optional Backup Memory Module allows backing up of all the information that has been set up in the system
D5-Evo Low-Voltage includes an electronic rectifier - making it the ideal cost-effective solution for sites with no mains power at the gate
Electronic features

















Opening and Closing Safety Beam/Photocell inputs with beam circuit functional test
High-security cleared-beam Autoclose in conjunction with safety beam (PIRAC)
Break-in and Ambush Alarm (a world first) with configurable outputs via onboard buzzer, Pillar Light Relay, etc.
Multiple Modes of Operation: Standard Mode, Condominium Mode (multi-user), Reversing Mode, PLC and Deadman Control Mode
Automatic closing with adjustable time, pushbutton override and selectable according to gate
position
Remote Gate Status Indicator (gate position, power failure, low battery, multiple collision detection
and Pillar Light status indication)
Pedestrian Opening (adjustable opening and Autoclose time)
Free-exit facility
Holiday Lockout - configurable as Emergency Stop
Courtesy/Pillar Light Timer with adjustable time
Fully configurable pre-delays with multi-modal Pre-flash
Multiple Operating Profiles to suit region of installation - select between ZA, CE, etc.
Full configuration of gate operating parameters, including independent gate opening and
closing speeds, ramp-up and ramp-down distances and crawl speed
Positive Close Mode (e.g. ensure activation of electric fence contact switch)
Onboard multichannel CENTURION code-hopping receiver with the ability to:
 learn transmitter buttons to specific functions (e.g. Gate trigger, Pedestrian
Opening, Free-exit, Pillar Light Control, Holiday Lockout)
 selectively delete specific transmitters that have been lost or stolen
 automatically learn transmitters into the system (Autolearn)
 automatically delete transmitters that are no longer in use (Delete-Not-Present)
Integrated ChronoGuard (a world first) with Real Time Clock and Calendar timer
offering multichannel time-activated and time-barring functionality
Auxiliary output can be configured via the ChronoGuard timer to provide
timer functionality to external devices, such as security lights, entrance fountain, etc.
Infrared Safety Beams or detection device must be fitted
PLC: separate inputs to open, close and stop the gate
Deadman Control Mode: separate inputs to open and close the gate,
that must be held active to move the gate
Remote LED must be fitted
Onboard receiver must be used or external access control device such as keypad or
keyswitch must be fitted
Infrared Safety Beams or Inductive Loop Detector must be fitted
To use this feature, a normally-closed emergency stop pushbutton must be fitted
Pre-flash security/Pillar Lights must be fitted
SLIDING GATE
MOTORS
ChronoGuard timer technology (a world first)
The D5-Evo is so advanced that it no longer needs humans to look after it. With the CENTURION ChronoGuard timer
technology onboard, many of the D5-Evo's features can be set to operate automatically or be time-barred at any time you
choose.
Its built-in Real Time Clock and Calendar allows you to set up different exclusions, which can cater for public holidays, special
Time-periods, etc.
Once you’ve set up the D5-Evo’s ChronoGuard using the intuitive LCD screen on the controller, you’ll start feeling particularly
redundant. For instance:
Why not automatically have your Pillar Lights switch on when the sun goes down?
Let the D5-Evo take control. With ChronoGuard timer technology this is easy to set up and
you’ll never have to worry about it again.
Better still - automatically time-activate the Holiday Lockout feature when you go to bed,
ensuring that only specific, authorised remotes will be able to open the gate while you’re
sleeping, keeping teenagers at home and unwanted ‘visitors’ out.
Mon Tue Wed Thur Fri Sat
ChronoGuard gives you the ability to time-bar specific CENTURION code-hopping remote
controls. This gives you the flexibility to control when specific remote control holders can open
your gate.
For example, your domestic staff may be given access to your property during the week, but on
weekends you may prefer to limit their access to your property.
Sun
ChronoGuard technology allows for almost unlimited time-based functionality, all of which is very simply set up on the controller
via the intuitive menu system and LCD user interface. The following functionality is available:
 Time-activate many of the physical inputs and outputs of the controller (see table below)
 Time-bar many of the physical inputs and outputs of the controller, as well as particular remote buttons learned into the
onboard receiver (see table below)
 The Real Time Clock and Calendar timer has the following flexibility:
 It supports 100 Time-periods, that may be set according to:
 Weekdays (M + T + W + T + F)  Any day of the week (M, T, W, T, F, S, S)
 Every day of the week (M + T + W + T + F + S + S)
 Weekends (S + S)
 Special calendar events (family holiday, etc.) occurring on any date until the year 2100
 Annual calendar events (New Year’s Day, etc.)
 Allows for multiple Time-periods to be set during a 24-hour period
 The Real Time Clock and Calendar timer is backed up for at least one hour to maintain the current time and date in the event
that all power is removed from the controller
Physical inputs
Trg:
Gate trigger
Ped:
Pedestrian
opening
FRX:
Free-exit
Aux:
Pillar light
control
Lck/Stp:
Holiday
Lockout
Close:
Closing safety
beams
Physical outputs
Aux IO:
Light:
Auxiliary
Pillar light
output
relay
Time-activate
Phys
Phys
Phys
Phys
Phys
Phys
Phys
Time-bar
Phys
physical connection to an external device, e.g. Inductive Loop Detector, SMARTGUARD keypad, etc.
interfaces with onboard CENTURION code-hopping receiver
Aux IO - open collector output that can be used to drive an external relay for operating any external device, e.g. water feature, security lights, etc.
Phys
SLIDING GATE
MOTORS
Technical specifications
D5-Evo Low-Voltage
D5-Evo
90V - 240V AC
+/-10% @ 50Hz
170mA
Input voltage
Current consumption (mains)
D5
evo
Battery charger amperage output
(dependant on PSU input voltage)
Accessories
NYLON
ANGLE
STEEL
NYLON
RAZ
Steel, Nylon RAZ or Nylon
angle rack
A variety of rack available in
different lengths, for different
strengths
Infrared Gate Safety
Beams
P36
Passive sensitive edge
Always recommended on any provides additional protection
gate automation installation against crushing
Maximum numbers of operations per day
Duty cycle - mains present
Motor voltage
Motor power supply
Current consumption (motor at rated load)
Motor push force - starting
Motor push force - rated
Gate mass - maximum
Gate length - maximum
Gate speed (varies with load)
Manual Override
Operations in standby with 7Ah battery
Half day
Full day
Collision Sensing
Operating temperature range
Onboard receiver type
Receiver code storage capacity
Receiver frequency
Degree of protection
Mass of unit packed
(with standard kit, but excl. rack and battery)
15V -19V AC
NA
90V AC
input
1A
output
15V AC
input
400mA
output
240V AC
input
2.2A
output
19V AC
input
1A
output
150
50%
55
20%
12V DC
Battery-driven (standard capacity - 12V 7Ah)
10A
30kgf
17kgf
500kg
100m
18-22m/min
Lockable with key release
44
35
Electronic
-15°C to +50°C
CENTURION code-hopping multichannel
receiver with selective add and delete
500 transmitter buttons
433MHz
IP55
10kg
Packaging dimensions
(with standard kit, but excl. rack and battery) 303mm wide x 231mm deep x 432mm high
Theft-resistant cage
and padlock
SMARTGUARD or
Plug-in step-down
SMARTGUARDair keypad transformer The perfect
Retro-installable steel cage
that increases the resistance
of the motor against theft
Cost-effective and versatile wired
and wireless keypad, allowing
access to pedestrians
power solution for your
D5-Evo Low-Voltage
Can operate off a solar supply, consult your local dealer for assistance
Can increase battery capacity for longer standby times
Gate opening and closing speeds can be configured to run slower depending on the
requirements of individual installations
Based on 25°C ambient temperature and unit not in direct sunlight
Based on an motor push force of less than 50% of rated
Based on four metre gate, excluding infrared safety beams
TM
www.centsys.com
G-SPEAK GSM-based
intercom systems
POLOphone intercom
Allows visitors to communicate
with people inside in order to
Use your mobile phone as the
intercom handset! Open the gate gain access to the property
and operate other electrical
devices
G-SWITCH-22 devices
Allows for monitoring and
activating the motor, via your
phone, from anywhere in the
world that has GSM network
coverage
Cabling requirements for
D5-Evo Low-Voltage Motor
The diameter of the cable needed to supply power to the system will depend on
the distance between the transformer and the motor, as well as on the output
voltage of the transformer used.
The table below shows the typical cable thicknesses for corresponding distance
and assumes a 16V AC transformer output.
Distance from transformer to motor
1mm²
1.5mm²
2.5mm²
FLUX SA Loop Detector
Allows free-exit of vehicles
from the property - requires
ground loop to be fitted
CENTURION transmitters Backup Memory
Module
Available in one-, two-, threeand four-button variants.
Incorporates code-hopping
encryption
Back up all the transmitters
and operating details set up in
the controller
Minimum cable thickness required
Up to 20m
20m - 40m
40m - 60m
Overall dimensions
260mm
198mm
Wheel kits
Solar supply
Steel pole for mounting
intercom gate station or
access control reader
A variety of wheel kits are
available from your local
dealer
Alternative means of
powering the system - consult
your local dealer
0.07.A.0073_08042014
www.CentSys.com
Centurion Systems (Pty) Ltd • South Africa
Contact number: +27 11 699 2400
94mm
Gooseneck
60mm
338mm
D5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement