User manual | Totaline, K-119, K-102, K-130, K-178, K-75, K-76, K-115, K-496, K-100 refrigeration Catalog 517 Pages
User manual | Totaline, K-119, K-102, K-130, K-178, K-75, K-76, K-115, K-496, K-100 refrigeration Catalog
Add to My manuals517 Pages
Below you will find brief information for Filter Drier Standard, Filter Drier High Capacity, TXV, Solenoid Valve, Filter Drier Burnout, Filter Drier Premium Serie. TOTALINE brand parts come with an extensive warranty and are backed by a team of professionals. These parts are crucial for the proper function of your refrigeration system. Whether you need a replacement for a worn-out component or are looking for an upgrade, they offer a wide range of options to suit your needs. TOTALINE is known for its high quality and reliability.
advertisement
▼
Scroll to page 2
of
517
a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 1 K-1 Motors Electrical Heating Components Indoor Air Quality Thermostats Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments PAGE JOHNSON CONTROLS BULB & CAPILLARY CONTROLS K-271-K-275 & K-278-K282 HOT WATER TEMP CONTROL K-276 DUCT THERMOSTAT K-276 & K-279 HIGH RANGE TEMP CONTROL K-277 HAZARDOUS LOCATION THERMOSTAT K-278 PORTABLE HEATER T-STAT K-278 ELECTRONIC TEMP CONTROLS K-283 - K-284 TWO STAGE CONTROLS K-285 - K-287 TEMPERATURE SENSORS K-288 BULB WELLS K-289 THERMOSTAT AND HUMIDISTAT GAURDS K-290 - K-291 AIR CONDITIONER CUTOUT CONTROL K-292 STEAM PRESSURE CONTROL K-293 PRESSURE SWITCH K-294 & K-308 PRESSURE CONTROLS K-295 - K-297 DUAL PRESSURE CONTROLS K-298 ELECTRONIC PRESSURE CONTROLS K-299 OIL PRESSURE CONTROLS K-300 & K-302& K-304 SENSATIVE PRESSURE SWITCH K-301 DIFFERENTIAL PRESSURE CONTROL K-303 & K-305 ELECTRONIC LUBE CONTROL K-306 ELECTRONIC TRANSDUCERS K-309 CURRENT SENSOR SWITCH K-310 CAPILLARY TUBES K-311 LEAK DETECTORS K-312 - K-313 LIQUID LEVEL & FLOW CONTROLS K-314 - K-316 AIRFLOW SWITCH & CONTROLS K-315 - K-317 FAN SPEED CONTROLS K-318 - K-320 PRESSURE ACTAUTED WATER VALVE K-321 - K-326 REVERSE ACTING VALVE K-327 & K329 TEMP ACTUATED MODULATING VALVE K-328 THREE WAY WATER REGULATOR VALVE K-330 2-WAY PRESSURE ACTUATED WATER VLV K-331- K-332 ELECTRIC TRANSFORMERS K-333 - K-334 GENERAL USE PRESSURE SWITCH K-335 MUELLER CHECK VALVES K-336 - K-337 BALL VALVES K-338 LINE VALVES K-339 - K-341 DIAPHRAM VALVES K-342 PRESSURE RELIEF VALVES K-343- K-344 ANGLE VALVES K-345 CHANGEOVER MANIFOLD K-346 COMPRESSOR VALVES K-347 - K-351 FUSABLE CONNECTORS K-352 PARAGON REFRIGERATION DEFROST CONTROLS K-352 - K353 UNIVERSAL DEFROST TIMERS K-354 ELECTRONIC TIMERS K-355 - K-356 24 HOUR TIMERS K-357 REFRIGERATION DEFROST ACCESSORIES K-358 PARKER TXV’S K-360 - K-371 GAS DEFROST VALVES K-372 Refrigeration PAGE PART NUMBER INDEX.........................................K1-A - K1-T CARRIER ICE MAKING EQUIPMENT.................. K-2 - K-9 DANFOSS TXV’S.................................................. K-10 - K-21 SOLENOID VALVES........................... K-22 - K-27 PRESSURE REGULATORS............... K-28 - K-33 THERMOSTATS..................................K-34 PRESSURE CONTROLS....................K-35 - K-36 SIGHT GLASS INDICATORS..............K-37 - K-39 CHECK VALVES.................... K-40 - K-41 DANFOSS / MANEUROP COND UNITS.......................................K-42 - K-65 RECIPROCATING COMPRESSORS..K-66 - K-69 EMERSON CLIMATE TECH TXV’S.................................... K-70 - K-120 EX VALVES..........................................K-121 - K-127 SOLENOID VALVES & COILS.............K-128 - K-152 COILS FOR SOLENOID VALVES........K-153 - K-157 INDUSTRIAL SOLENOID VALVES .....K-158 - K-174 SYSTEM PROTECTORS....................K-175 - K-201 SIGHT GLASS/ INDICATORS.............K-202 - K-207 ACCUMULATORS...............................K-208 CHECK VALVES ................................K-209 BALL VALVES .................................... K-210 OIL SEPARATORS & RESERVOIRS..K-211 - K-215 OIL FILTERS & CONTROLS...............K-216 - K-220 TEMP PRESSURE CONTROLS.........K-221 - K- 229 FURNAS CONTACTORS................................... K-230 - K-231 GRASSLIN DEFROST TIMERS............................K-232 GENERAL PURPOSE TIMERS......... K-233 - K-234 24/7 TIMERS......................................K-235 - K-239 COUNTDOWN TIMERS.....................K-240 IN WALL TIMERS...............................K-241 PLUG IN TIMERS.............................. K-242 HENRY TECHNOLOGIES SIGHT GLASS/ INDICATORS............K-243 ACCUMULATORS & MUFFLERS...... K-243 - K-244 REFRIGERATION RECEIVERS......... K-245 - K-246 OIL SEPARATORS............................. K-247 - K-249 HEAT ELEMENTS...............................K-250 OIL LEVEL REGULATORS ................ K-251 - K-257 OIL FILTER DRIERS........................... K-258 CHECK VALVES................................. K-259 - K-260 PACKLESS VALVES........................... K-261 RECEIVER VALVES............................K-262 SEALED & DUAL SHUT OFF ............ K-263 - K-264 PRESSURE RELIEF VALVES.............K-265 - K-267 RUPTURE CONTROLS...................... K-268 - K-270 Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 2 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index PARKER SIGHT GLASSES LIQ LINE DRIERS BI-FLOW DRIERS SUCTION LINE DRIERS DRYER SHELLS & FILTER CORES RECOVERY MACHINE FILTERS LP GAS FILTERS OIL VAPOR SEPARATORS FILTER DRIER CORES SPUN COPPER DRIERS SPRING LOADED COPPER DRIERS COPPER SERVICE DRIERS COPPER LIQ LINE SOLID CORE DRIERS ACCUMULATORS OIL SEPARATORS COPPER STRAINERS PRESSURE REGULATING VALVES SOLENOID VALVES RANCO OIL PROTECTION CONTROLS REFRIGERANT HOSE HI - LOW PRESSURE LIMIT CONTROLS WIDE RANGE TEMP CONTROLS ICE MACHINE CONTROLS DEFROST FAN CONTROL ROOM AIR COND CYCLING CONTROL ICE BANK CONTROLS SINGLE FUNCTION PRESSURE CONTROL COMMERCIAL TEMP CONTROLS WATER COOLER CONTROL SPORLAN TXV’S SOLENOID VALVES CATCH-ALL DRIERS HEAT PUMP FILTER DRIERS BI-DIRECTIONAL DRIERS SUCTION FILTER SHELLS ACID TEST KITS SIGHT GLASSES/MOISTURE INDICATORS DISCHARGE BYPASS VALVES SUPERIOR BALL VALVES LINE VALVES GLOBE & ANGLE VALVES CHECK VALVES SIGHT GLASSES PRESSURE RELIEF VALVES ANGLE VALVES SUCTION LINE FILTERS (SHELLS & CORES) TOTALINE FILTER DRIERS BURNOUT DRIERS STANDARD & HIGH CAPACITY DRIERS K-373 K-374 K-377 K-379 K-382 K-383 K-384 K-385 K-386 K-387 K-389 K-392K-394K-396 K-398 K-399 K-402 K-419 - TOTALINE SUCTION LINE DRIERS w/CHARCOAL STND CAPACITY SUCTION DRIERS PREMIUM SERIESSUCTION DRIER HEAT PUMP DRIERS BI-DIRECTIONAL DRIERS REPLACEMENT FILTER DRIER SHELLS BRASS TAKE-A-PART SHELLS REPLACEMENT CORES & CARTRIDGES K-376 K-378 K-381 K-388 K-391 K-393 K-395 K-397 K-401 K-418 K-427 K-428 K-428 K-429 K-430 - K-431 K-432 - K-433 K-434 K-434 K-435 K-436 - K-438 K-439 K-440 K-441K-447 K-449 K-454 K-455 K-456 K-456 K-457 K-458 - K-446 K-448 K-453 K-459 K-460 K-461- K-462 K-463 K-464 K-465 K-465 - K-466 K-467 K-468- K-470 K-471- K-473 K-474- K-475 K-476 - K-478 K-1 K-479 K-481K-483 K-485 K-487 K-488K-491 K-494 - K-480 K-482 K-484 K-486 K-490 K-493 K-496 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 3 K-1A PAGE K-119 K-102 K-130 K-130 K-130 K-130 K-130 K-130 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-119 K-119 K-119 K-119 K-119 K-119 K-496 K-119 K-75 K-76 K-75 K-76 K-75 K-76 K-115 K-119 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 K-178 Motors PART NO. 047332 047358 047500 047501 047502 047503 047504 047505 047601 047602 047603 047604 047605 047606 047607 047608 047609 047610 047611 047612 047613 047614 047615 047616 047617 047618 047619 047651 047653 047654 047655 047657 047658 047664 047680 047752 047752 047753 047753 047758 047758 047759 047790 048210 048211 048212 048213 048214 048215 048216 048217 048218 048219 048220 048221 048222 048223 048224 048225 048228 Electrical PAGE K-100 K-100 K-100 K-100 K-100 K-100 K-100 K-102 K-171 K-170 K-166 K-100 K-170 K-167 K-114 K-102 K-170 K-104 K-170 K-170 K-170 K-170 K-170 K-102 K-104 K-114 K-170 K-171 K-139 K-170 K-170 K-107 K-107 K-107 K-107 K-107 K-105 K-496 K-101 K-107 K-114 K-101 K-107 K-114 K-101 K-167 K-167 K-114 K-115 K-102 K-104 K-119 K-119 K-119 K-119 K-119 K-119 K-119 K-119 K-119 Heating Components PART NO. 037039 037040 037041 037043 037045 037047 037049 037389 037558 037958 038629 038699 038879 038934 039130 039152 039834 039862 039917 039918 039930 039931 040532 040568 040569 040569 040582 040680 040846 041314 041518 041556 041560 041562 041566 041734 042426 043582 044733 044733 044733 044846 044846 044846 044984 045072 045083 045362 045527 046474 046692 046838 046839 046840 047101 047105 047280 047283 047284 047285 Indoor Air Quality PAGE K-101 K-107 K-114 K-101 K-107 K-114 K-103 K-103 K-103 K-103 K-103 K-170 K-103 K-171 K-171 K-167 K-171 K-101 K-103 K-151 K-167 K-174 K-114 K-166 K-166 K-166 K-166 K-166 K-166 K-166 K-166 K-173 K-173 K-173 K-171 K-171 K-105 K-105 K-102 K-166 K-166 K-166 K-171 K-102 K-101 K-114 K-171 K-171 K-102 K-104 K-105 K-102 K-105 K-104 K-114 K-100 K-100 K-100 K-100 K-100 Thermostats PART NO. 027770 027770 027770 027771 027771 027771 027918 027919 027926 028030 028032 028192 028849 028955 028956 028964 029235 029411 029429 029781 029856 030038 030071 030619 030620 030621 030623 030624 030625 030626 030627 030719 030722 030725 030765 031349 031654 032131 032207 032303 032304 032305 032334 032374 032988 033697 034047 034178 034803 035000 035083 035162 036616 036750 036750 037034 037035 037036 037037 037038 Oils & Chemicals PAGE K-262 K-262 K-262 K-262 K-262 K-270 K-90 K-90 K-90 K-91 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-103 K-114 K-103 K-160 K-162 K-171 K-114 K-115 K-115 K-115 K-115 K-115 K-115 K-115 K-115 K-115 K-104 K-114 K-104 K-114 K-104 K-114 K-114 K-114 K-114 K-191 K-101 K-107 K-114 K-88 K-192 K-104 K-114 K-101 K-107 K-114 K-101 K-107 K-114 K-101 K-107 K-114 Accessories, Supplies & Commodities PART NO. 9270 9271 9272 9273 9274 009290 009810 009811 009812 009955 013938 013938 013939 013939 015776 015776 015794 015794 020846 020871 021067 021103 021108 021109 021288 021985 021987 021991 021996 021997 022003 022005 022017 022018 023351 023357 024511 024511 025011 025011 025090 025100 025101 026570 027268 027268 027268 027385 027467 027579 027579 027764 027764 027764 027766 027766 027766 027769 027769 027769 Tools & Instruments PAGE K-465 K-264 K-264 K-264 K-263 K-263 K-263 K-263 K-263 K-466 K-466 K-466 K-466 K-466 K-466 K-466 K-466 K-466 K-466 K-466 K-466 K-466 K-466 K-466 K-466 K-466 K-266 K-267 K-267 K-266 K-267 K-268 K-268 K-267 K-266 K-267 K-266 K-267 K-266 K-267 K-266 K-267 K-268 K-268 K-268 K-268 K-465 K-262 K-262 K-262 K-262 K-262 K-262 K-262 K-264 K-264 K-263 K-263 K-263 K-263 Refrigeration PART NO. 819 923 925 927 2031 2032 2033 2034 2035 3000 3001 3002 3012 3014 3015 3016 3020 3030 3045 3060 3075 3212 3214 3215 3216 3220 5230 5230 5231 5232 5232 5525 5526 5600 5601 5601 5602 5602 5603 5603 5604 5604 5626 5627 5628 5629 006433 7830 7831 7832 7833 7834 7835 7836 8024 8025 9261 9263 9264 9265 Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 4 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index PART NO. 048229 048657 048803 049194 049204 049462 049483 049551 049632 049632 049633 049633 049634 049634 049638 049638 049881 050563 050563 050563 050842 050842 050842 050981 051176 051176 051176 052773 052912 052912 052940 052941 052942 052943 052944 052945 052951 052954 052955 052957 052958 053001 053060 053061 053069 053070 053071 053191 053215 053236 053266 053270 053271 053316 053317 053374 053416 053564 053763 053764 PAGE K-178 K-119 K-205 K-135 K-119 K-194 K-195 K-178 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-102 K-101 K-107 K-114 K-101 K-107 K-114 K-102 K-101 K-107 K-114 K-119 K-105 K-105 K-105 K-105 K-105 K-105 K-105 K-105 K-102 K-102 K-102 K-104 K-104 K-189 K-90 K-90 K-91 K-93 K-93 K-92 K-148 K-133 K-91 K-93 K-93 K-90 K-91 K-119 K-102 K-149 K-87 K-87 PART NO. 053766 053767 053769 053915 053916 054024 054024 054046 054079 054105 054134 054135 054136 054137 054138 054140 054141 054142 054143 054145 054226 054226 054231 054231 054232 054232 054233 054233 054243 054243 054246 054246 054247 054247 054249 054249 054250 054250 054258 054258 054360 054361 054364 054365 054366 054369 054370 054390 054395 054399 054401 054404 054413 054415 054569 054570 054571 054572 054573 054574 PAGE K-87 K-87 K-87 K-90 K-91 K-73 K-73 K-190 K-105 K-102 K-90 K-90 K-90 K-90 K-91 K-92 K-92 K-93 K-93 K-93 K-75 K-76 K-75 K-76 K-75 K-76 K-75 K-76 K-75 K-76 K-75 K-76 K-75 K-76 K-75 K-76 K-75 K-76 K-75 K-76 K-91 K-91 K-90 K-91 K-93 K-90 K-93 K-102 K-105 K-105 K-105 K-105 K-105 K-102 K-105 K-105 K-105 K-105 K-105 K-105 PART NO. 054723 054756 054768 054777 054778 054779 054780 054783 054784 054785 054793 054794 054795 054798 054838 054844 054892 054895 054905 054909 054914 054917 054921 054924 054925 054927 054928 054930 054931 054932 054933 054936 054937 054939 054940 054942 054943 054946 054947 054950 054964 054965 054966 054967 054968 054969 054976 054977 054979 054980 054981 054983 054984 054986 054988 054989 054990 054992 055092 055093 K-1B PAGE K-90 K-91 K-93 K-92 K-92 K-92 K-92 K-93 K-93 K-93 K-107 K-107 K-107 K-87 K-91 K-93 K-90 K-91 K-90 K-91 K-90 K-91 K-90 K-91 K-91 K-90 K-90 K-91 K-91 K-91 K-90 K-91 K-91 K-90 K-90 K-91 K-91 K-91 K-90 K-91 K-90 K-90 K-90 K-93 K-93 K-93 K-90 K-90 K-93 K-93 K-93 K-93 K-90 K-90 K-93 K-93 K-93 K-93 K-93 K-115 PART NO. 055096 055097 055104 055105 055109 055109 055111 055111 055125 055187 055490 055491 055493 055494 055495 055496 055497 055498 055501 055633 055652 055657 055702 055703 055704 055706 055708 055785 055792 055827 055863 055870 055873 055874 055881 055889 055924 055927 055928 055931 055932 055932 055936 055969 055991 055992 055993 055994 055996 056008 056013 056018 056021 056022 056024 056029 056031 056032 056039 056042 PAGE K-115 K-115 K-105 K-105 K-105 K-105 K-105 K-105 K-107 K-92 K-90 K-93 K-90 K-91 K-91 K-93 K-93 K-93 K-105 K-90 K-105 K-93 K-90 K-102 K-102 K-91 K-91 K-90 K-90 K-91 K-91 K-91 K-105 K-90 K-102 K-91 K-92 K-91 K-90 K-91 K-73 K-73 K-90 K-90 K-93 K-93 K-91 K-91 K-93 K-90 K-90 K-90 K-91 K-93 K-93 K-93 K-93 K-93 K-102 K-91 PART NO. 056045 056063 056119 056151 056169 056225 056228 056240 056294 056294 056294 056315 056315 056331 056352 056421 056508 056547 056547 056661 056662 056686 056686 056818 056819 056820 056821 056823 056824 056825 056835 056906 056932 056932 056932 057013 057027 057027 057028 057028 057029 057029 057047 057047 057153 057153 057153 057209 057210 057233 057235 057256 057260 057260 057261 057261 057291 057292 057293 057294 PAGE K-178 K-90 K-90 K-91 K-90 K-93 K-90 K-119 K-101 K-107 K-114 K-73 K-73 K-91 K-196 K-104 K-199 K-73 K-73 K-496 K-496 K-73 K-73 K-92 K-92 K-92 K-92 K-92 K-92 K-92 K-496 K-178 K-101 K-107 K-114 K-178 K-75 K-76 K-75 K-76 K-75 K-76 K-75 K-76 K-101 K-107 K-114 K-119 K-101 K-119 K-104 K-92 K-75 K-76 K-75 K-76 K-94 K-94 K-95 K-94 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 5 K-1C PAGE K-105 K-105 K-104 K-92 K-98 K-108 K-105 K-92 K-107 K-73 K-73 K-201 K-98 K-98 K-75 K-76 K-75 K-76 K-75 K-76 K-75 K-76 K-75 K-76 K-102 K-102 K-102 K-102 K-79 K-79 K-79 K-79 K-79 K-73 K-73 K-79 K-79 K-79 K-79 K-79 K-79 K-79 K-105 K-105 K-92 K-102 K-73 K-73 K-108 K-92 K-198 K-79 K-79 K-183 K-104 K-108 K-108 K-108 K-79 K-79 Motors PART NO. 061677 061677 061692 061694 061700 061710 061724 061730 061760 061805 061805 061862 061865 061866 061904 061904 061906 061906 061908 061908 061912 061912 061914 061914 061946 061948 061949 061951 061954 061955 061956 061957 061958 061960 061960 061962 061963 061964 061967 061968 061971 061980 062036 062036 062055 062078 062088 062088 062124 062151 062231 062289 062290 062300 062303 062347 062370 062371 062372 062373 Electrical PAGE K-178 K-178 K-178 K--185 K-140 K-146 K-73 K-73 K-213 K-213 K-213 K-105 K-105 K-208 K-105 K-105 K-105 K-105 K-105 K-75 K-76 K-213 K-213 K-213 K-213 K-213 K-213 K-213 K-213 K-213 K-213 K-213 K-213 K-213 K-213 K-115 K-93 K-105 K-496 K-496 K-496 K-73 K-73 K-73 K-73 K-108 K-108 K-108 K-108 K-496 K-75 K-76 K-105 K-105 K-105 K-105 K-105 K-105 K-105 K-105 Heating Components PART NO. 060012 060013 060014 060223 060626 060633 060643 060643 060759 060760 060761 060788 060788 060819 060854 060855 060856 060857 060858 060865 060865 060875 060876 060877 060878 060879 060930 060931 060933 060934 060974 060975 060978 060979 060980 061054 061196 061215 061235 061237 061238 061243 061243 061247 061247 061608 061609 061610 061611 061617 061646 061646 061673 061673 061674 061674 061675 061675 061676 061676 Indoor Air Quality PAGE K-91 K-102 K-105 K-105 K-94 K-93 K-93 K-94 K-91 K-119 K-91 K-109 K-111 K-88 K-98 K-93 K-93 K-93 K-92 K-92 K-73 K-73 K-73 K-73 K-92 K-105 K-91 K-92 K-102 K-102 K-93 K-90 K-104 K-91 K-193 K-496 K-496 K-102 K-73 K-73 K-75 K-76 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-75 K-76 K-90 K-94 K-73 K-73 K-181 K-178 K-178 K-178 Thermostats PART NO. 058546 058569 058582 058582 058595 058607 058608 058609 058648 058674 058681 058707 058707 058707 058707 058808 058875 058907 058976 058977 058985 058985 058986 058986 058995 059076 059079 059086 059130 059189 059291 059304 059333 059422 059541 059541 059542 059548 059565 059565 059575 059575 059582 059582 059603 059603 059605 059605 059607 059607 059625 059625 059653 059654 059683 059683 059874 060009 060010 060011 Oils & Chemicals PAGE K-75 K-76 K-91 K-91 K-90 K-90 K-90 K-156 K-88 K-94 K-87 K-119 K-94 K-91 K-73 K-73 K-87 K-75 K-76 K-102 K-91 K-91 K-91 K-91 K-91 K-75 K-76 K-75 K-76 K-92 K-92 K-92 K-73 K-73 K-105 K-105 K-95 K-94 K-87 K-87 K-87 K-87 K-90 K-91 K-95 K-95 K-95 K-95 K-93 K-104 K-94 K-90 K-92 K-75 K-76 K-92 K-187 K-75 K-76 K-90 Accessories, Supplies & Commodities PART NO. 057613 057613 057616 057617 057618 057619 057620 057669 057686 057748 057764 057771 057781 057784 057828 057828 057834 057853 057853 057878 057895 057896 057897 057903 057906 057950 057950 057951 057951 057958 057974 057976 057987 057987 058038 058038 058067 058069 058074 058082 058083 058085 058100 058152 058248 058249 058250 058252 058305 058336 058421 058430 058451 058484 058484 058490 058500 058536 058536 058545 Tools & Instruments PAGE K-92 K-92 K-92 K-92 K-92 K-92 K-94 K-94 K-101 K-102 K-104 K-92 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-102 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-94 K-95 K-95 K-95 K-95 K-95 K-95 K-95 K-95 K-95 K-95 K-75 K-76 K-75 K-76 K-94 K-94 K-94 K-95 K-75 K-76 K-75 K-76 Refrigeration PART NO. 057312 057313 057315 057316 057317 057318 057321 057322 057323 057370 057372 057378 057397 057398 057399 057409 057410 057411 057412 057428 057429 057430 057432 057433 057434 057436 057437 057438 057439 057440 057441 057446 057448 057454 057455 057456 057457 057458 057467 057468 057470 057482 057484 057485 057486 057487 057488 057489 057555 057555 057556 057556 057568 057570 057572 057573 057606 057606 057607 057607 Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 6 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index PART NO. 062374 062376 062376 062424 062437 062460 062616 062658 062718 062721 062722 062724 062725 062727 062728 062730 062733 062734 062736 062737 062754 062789 062790 062792 062828 062829 062830 062831 062838 062839 062852 062853 062884 062961 063006 063010 063015 063018 063019 063020 063069 063075 063100 063103 063114 063127 063128 063129 063132 063138 063141 063153 063200 063201 063348 063387 063388 063389 063390 063391 PAGE K-79 K-73 K-73 K-496 K-102 K-108 K-79 K-102 K-98 K-98 K-98 K-98 K-98 K-98 K-98 K-98 K-98 K-98 K-79 K-92 K-79 K-79 K-79 K-157 K-92 K-217 K-79 K-79 K-79 K-79 K-79 K-79 K-105 K-200 K-79 K-79 K-79 K-79 K-79 K-79 K-102 K-104 K-98 K-98 K-102 K-104 K-79 K-79 K-79 K-98 K-98 K-98 K-79 K-79 K-79 K-98 K-98 K-98 K-98 K-98 PART NO. 063392 063414 063414 063416 063416 063425 063452 063454 063464 063464 063465 063465 063501 063503 063504 063510 063511 063513 063541 063554 063585 063587 063644 063648 063648 063649 063649 063650 063702 063702 063869 063898 063898 063908 063925 063939 063940 063974 063978 064000 064018 064042 064072 064072 064137 064137 064138 064138 064139 064139 064140 064140 064141 064141 064142 064142 064144 064144 064145 064145 PAGE K-98 K-109 K-98 K-109 K-98 K-98 K-129 K-129 K-75 K-76 K-75 K-76 K-105 K-73 K-73 K-98 K-129 K-129 K-102 K-98 K-129 K-129 K-102 K-73 K-73 K-73 K-73 K-98 K-75 K-76 K-87 K-75 K-76 K-179 K-73 K-79 K-79 K-104 K-178 K-91 K-98 K-197 K-75 K-76 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 PART NO. 064146 064146 064166 064170 064195 064200 064219 064235 064235 064236 064236 064237 064237 064238 064238 064239 064239 064240 064240 064241 064241 064242 064242 064243 064243 064244 064244 064245 064245 064246 064246 064247 064247 064248 064248 064250 064250 064273 064273 064280 064280 064281 064281 064289 064290 064291 064295 064295 064383 064424 064424 064425 064425 064434 064434 064460 064460 064493 064497 064497 K-1D PAGE K-82 K-84 K-79 K-92 K-92 K-102 K-94 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-82 K-84 K-92 K-92 K-92 K-82 K-84 K-210 K-73 K-73 K-73 K-73 K-82 K-84 K-82 K-84 K-108 K-118 K-118 PART NO. 064499 064500 064501 064502 064503 064504 064537 064537 064538 064538 064569 064570 064581 064595 064595 064761 064780 064780 064805 064837 064857 064868 064869 064870 064871 064872 064873 064874 064875 064880 064881 064882 064883 064884 064885 064886 064887 064888 064889 064890 064891 064892 064895 064896 064897 064898 064899 064950 064952 064953 064954 064961 064961 064985 065087 065088 065090 065091 065092 065093 PAGE K-118 K-118 K-118 K-118 K-118 K-118 K-82 K-84 K-82 K-84 K-118 K-118 K-98 K-73 K-73 K-91 K-82 K-84 K-79 K-102 K-207 K-87 K-87 K-87 K-87 K-87 K-87 K-87 K-87 K-88 K-87 K-87 K-87 K-87 K-87 K-87 K-87 K-87 K-87 K-87 K-87 K-87 K-87 K-87 K-88 K-88 K-88 K-215 K-216 K-219 K-219 K-105 K-105 K-209 K-112 K-112 K-112 K-112 K-112 K-112 PART NO. 065094 065095 065123 065124 065125 065148 065149 065170 065183 065203 065226 065298 065298 065330 065336 065337 065338 065339 065340 065365 065391 065391 065458 065527 065527 065527 065579 065579 065580 065580 065586 065623 065623 065624 065624 065626 065626 065630 065630 065631 065631 065632 065632 065633 065633 065634 065634 065635 065635 065636 065637 065641 065643 065645 065646 065647 065649 065650 065651 065652 PAGE K-112 K-112 K-103 K-103 K-103 K-73 K-73 K-219 K-73 K-88 K-79 K-109 K-98 K-73 K-79 K-79 K-79 K-79 K-79 K-218 K-202 K-203 K-94 K-101 K-107 K-114 K-73 K-73 K-73 K-73 K-79 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-90 K-90 K-91 K-91 K-91 K-92 K-92 K-92 K-92 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 7 K-1E PAGE K-404 K-404 K-404 K-404 K-404 K-404 K-404 K-404 K-404 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 Motors PART NO. 101715 101716 101717 101718 101719 101720 101721 101722 101723 101724 101725 101726 101727 101728 101729 101730 101731 101732 101733 101734 101735 101736 101737 101738 101739 101740 101741 101742 101743 101744 101745 101746 101747 101748 101749 101750 101751 101752 101753 101754 101755 101756 101757 101758 101759 101760 101761 101762 101763 101764 101765 101766 101767 101768 101769 101770 101771 101772 101773 101774 Electrical PAGE K-409 K-409 K-409 K-409 K-409 K-409 K-409 K-409 K-410 K-410 K-410 K-410 K-410 K-410 K-410 K-410 K-409 K-409 K-409 K-409 K-409 K-409 K-409 K-409 K-410 K-410 K-410 K-410 K-410 K-410 K-410 K-410 K-410 K-410 K-410 K-410 K-410 K-410 K-409 K-409 K-409 K-410 K-409 K-409 K-410 K-409 K-409 K-409 K-404 K-404 K-404 K-404 K-404 K-404 K-404 K-404 K-404 K-404 K-404 K-404 Heating Components PART NO. 100911 100912 100913 100914 100915 100916 100917 100918 100922 100923 100924 100925 100926 100927 100928 100929 100930 100931 100932 100933 100934 100935 100936 100937 100938 100939 100940 100941 100942 100943 100944 100945 100946 100947 100948 100949 100950 100951 101386 101405 101421 101435 101463 101466 101545 101562 101622 101660 101703 101704 101705 101706 101707 101708 101709 101710 101711 101712 101713 101714 Indoor Air Quality PAGE K-496 K-107 K-114 K-114 K-114 K-114 K-229 K-229 K-229 K-229 K-225 K-125 K-125 K-124 K-125 K-126 K-124 K-125 K-126 K-125 K-125 K-127 K-124 K-125 K-127 K-124 K-125 K-127 K-122 K-122 K-122 K-122 K-122 K-122 K-124 K-125 K-127 K-228 K-228 K-227 K-227 K-227 K-221 K-221 K-223 K-223 K-223 K-223 K-223 K-223 K-223 K-223 K-221 K-221 K-221 K-221 K-224 K-228 K-228 K-227 Thermostats PART NO. 095762 095813 096091 096312 096425 096646 097308 097311 097312 097379 097456 097707 097709 097712 097712 097712 097713 097713 097713 097714 097715 097715 097716 097716 097716 097717 097717 097717 097718 097719 097720 097721 097722 097723 097728 097728 097728 097774 097775 097793 097815 097849 097882 097885 097894 097898 097901 097904 097908 097911 097914 097923 097926 097929 097932 097935 097954 097993 097995 097998 Oils & Chemicals PAGE K-421 K-102 K-421 K-421 K-421 K-421 K-421 K-421 K-421 K-421 K-421 K-421 K-103 K-421 K-421 K-421 K-104 K-103 K-103 K-104 K-101 K-107 K-114 K-421 K-421 K-372 K-372 K-372 K-102 K-107 K-421 K-421 K-421 K-421 K-421 K-421 K-103 K-103 K-102 K-101 K-107 K-114 K-107 K-102 K-100 K-100 K-114 K-496 K-102 K-496 K-107 K-102 K-100 K-105 K-101 K-107 K-114 K-101 K-114 K-107 Accessories, Supplies & Commodities PART NO. 070223 070346 070392 070393 070394 070561 070562 070563 070564 070712 070713 070714 070738 070777 070808 070810 070866 071155 071238 071421 071757 071757 071757 075520 075530 076051 076052 076053 077063 077201 077300 077310 077311 077320 077340 077360 077896 078117 079346 083378 083378 083378 083765 084768 088837 089058 089306 089338 089445 089559 089748 089975 093343 093565 094038 094038 094038 094289 094594 095534 Tools & Instruments PAGE K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-92 K-92 K-92 K-92 K-92 K-92 K-92 K-92 K-101 K-107 K-114 K-101 K-107 K-114 K-79 K-79 K-79 K-79 K-211 K-79 K-79 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-73 K-79 K-214 K-110 K-110 K-110 K-110 K-110 K-110 K-110 K-110 K-110 K-111 K-137 K-421 K-421 Refrigeration PART NO. 065675 065676 065676 065682 065685 065686 065687 065688 065689 065690 065691 065692 065693 065697 065698 065733 065734 065735 065736 065737 065738 065739 065740 065748 065748 065748 065861 065861 065861 065876 065877 065878 065880 065895 065977 065978 066079 066080 066081 066082 066083 066084 066085 066086 066087 066088 066135 066146 066147 066148 066149 066150 066151 066152 066153 066154 066155 066180 070221 070222 Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 8 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index PART NO. 101775 101776 101777 101778 101779 101780 101781 101782 101783 101784 101785 101786 101829 101830 101831 101832 101833 101834 101835 101836 101837 101838 101839 101840 101841 101842 101843 101844 101845 101846 101847 101848 101849 101892 101893 101894 101895 101896 101897 101898 101899 101900 101901 101902 101903 101904 101905 101906 101907 101908 101909 101910 101911 101912 101928 101950 101951 101952 101953 101954 PAGE K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-408 K-409 K-406 K-406 K-406 K-406 K-406 PART NO. 101955 101956 101957 101958 101959 101960 101961 101962 101963 101964 101965 101966 101967 101968 101969 101970 101983 101984 101986 101987 101997 102032 102055 102074 102099 102101 102133 102650 102661 102794 102810 102868 102869 102870 102893 102903 102920 102921 102921 102922 102923 102924 102925 102927 102928 102929 102934 102935 102936 102937 102938 102939 102940 102941 102942 102943 102944 102945 102946 102947 PAGE K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-408 K-408 K-410 K-409 K-404 K-409 K-409 K-410 K-407 K-406 K-409 K-409 K-408 K-410 K-409 K-409 K-409 K-409 K-410 K-409 K-404 K-404 K-404 K-404 K-404 K-404 K-404 K-404 K-404 K-410 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 K-405 PART NO. 102948 102949 102950 102951 102952 102953 102954 102955 102956 102957 102958 102959 102960 102961 102962 102963 102964 102965 102966 102969 102970 103004 103041 103115 103116 103117 103155 103270 103275 103276 103282 103283 103284 103285 103286 103293 103550 103551 103552 103553 103554 103555 103556 103557 103558 103559 103560 103561 103562 103563 103564 103565 103566 103567 103568 103569 103570 103571 103572 103573 K-1F PAGE K-405 K-405 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-407 K-408 K-408 K-408 K-409 K-404 K-409 K-409 K-409 K-404 K-408 K-408 K-408 K-404 K-405 K-407 K-406 K-405 K-409 K-415 K-415 K-415 K-415 K-415 K-415 K-415 K-415 K-415 K-415 K-415 K-415 K-415 K-413 K-413 K-413 K-413 K-413 K-413 K-413 K-413 K-413 K-413 K-413 PART NO. 103574 103575 103576 103577 103578 103579 103580 103581 103582 103583 103584 103585 103586 103587 103594 103599 103600 103601 103602 103603 103604 103605 103606 103607 103608 103609 103610 103611 103612 103613 103614 103615 103616 103617 103618 103619 103622 103623 103624 103625 103626 103627 103628 103629 103630 103631 103632 103633 103746 103795 103832 103833 103834 103835 103836 103837 103838 103839 103840 103841 PAGE K-413 K-413 K-416 K-416 K-416 K-416 K-416 K-416 K-416 K-416 K-416 K-416 K-416 K-416 K-409 K-415 K-415 K-415 K-415 K-415 K-415 K-415 K-413 K-413 K-413 K-413 K-413 K-413 K-413 K-416 K-416 K-416 K-416 K-416 K-416 K-416 K-415 K-415 K-415 K-415 K-413 K-413 K-413 K-413 K-416 K-416 K-416 K-416 K-409 K-410 K-413 K-413 K-413 K-413 K-413 K-413 K-413 K-413 K-413 K-415 PART NO. 103842 103843 103844 103845 103846 103847 103848 103849 103850 103851 103852 103853 103854 103855 103856 103857 103858 103901 103902 103903 103904 103905 103906 103907 103908 103909 103910 103911 103912 103913 103914 103915 103916 103917 103918 103919 103920 103921 104313 104314 104315 104317 104318 104321 104548 104549 104550 104551 104552 104553 104554 104555 104556 104557 104558 104559 104560 104561 104562 104563 PAGE K-415 K-415 K-415 K-415 K-415 K-415 K-415 K-415 K-416 K-416 K-416 K-416 K-416 K-416 K-416 K-416 K-416 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-406 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 9 K-1G PAGE K-41 K-41 K-40 K-41 K-41 K-41 K-41 K-40 K-40 K-40 K-40 K-40 K-40 K-40 K-40 K-40 K-40 K-41 K-40 K-40 K-40 K-41 K-41 K-40 K-40 K-41 K-40 K-40 K-40 K-41 K-41 K-55 K-55 K-55 K-55 K-55 K-55 K-368 K-386 K-378 K-378 K-379 K-380 K-379 K-380 K-379 K-380 K-379 K-380 K-379 K-380 K-379 K-380 K-379 K-380 K-379 K-380 K-379 K-380 K-379 Motors PART NO. 020-1020 020-1021 020-1023 020-1026 020-1029 020-1032 020-1034 020-1038 020-1039 020-1040 020-1041 020-1042 020-1043 020-1044 020-1046 020-1052 020-1054 020-1056 020-1057 020-1058 020-1059 020-1060 020-1061 020-1064 020-1066 020-1068 020-1069 020-1070 020-1071 020-1072 020-1073 023Z5023 023Z5032 023Z5033 023Z5058 023Z5064 023Z5067 031119-01 031367-00 031589-00 031589-00 031593-01 031593-01 031593-02 031593-02 031593-03 031593-03 031593-04 031593-04 031593-05 031593-05 031593-06 031593-06 031593-07 031593-07 031593-08 031593-08 031593-09 031593-09 031593-10 Electrical PAGE K-57 K-468 K-468 K-468 K-468 K-468 K-468 K-470 K-39 K-37 K-37 K-37 K-37 K-37 K-37 K-37 K-37 K-37 K-37 K-37 K-37 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-23 K-23 K-23 K-23 K-23 K-23 K-23 K-23 K-23 K-23 K-23 K-23 K-23 K-23 K-23 K-23 K-40 K-40 K-40 K-40 K-40 Heating Components PART NO. 740154601 4CFA-14S 4CFA-18S 4CFA-22S 4CFA-26S 4CFA-34S 4CFA-42S HC-48 014-0006 014-0009 014-0024 014-0060 014-0061 014-0063 014-0064 014-0065 014-0066 014-0067 014-0068 014-0069 014-0070 014-0119 014-0131 014-0132 014-0133 014-0137 014-0138 014-0139 014-0142 014-0143 014-0144 014-0145 014-0147 014-0152 014-0154 014-1091 014-1092 014-1096 014-1098 018F7681 018F7682 018F7683 018F7689 018F7691 018F7692 018F7693 018F7699 018Z7603 018Z7611 018Z7612 018Z7613 018Z7621 018Z7622 018Z7623 018Z7625 020-1010 020-1011 020-1012 020-1018 020-1019 Indoor Air Quality PAGE K-59 K-59 K-50 K-51 K-50 K-51 K-50 K-51 K-52 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-54 K-65 K-65 K-55 K-55 K-55 K-55 K-55 K-55 K-57 K-57 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-58 K-58 K-58 K-58 K-68 K-68 K-68 K-68 K-68 K-68 K-55 K-51 K-51 K-51 K-51 K-51 Thermostats PART NO. 7002002 7002503 7006501 7006501 7006506 7006506 7006507 7006507 7303507 7304519 7304519 7304522 7304522 7304523 7304523 7304528 7304528 7304533 7304533 7304533 7305503 7305504 7305505 7305513 7306500 7306506 7401563 7401566 7402501 7402501 7402503 7402503 7402504 7402504 7402505 7402505 7402506 7402506 7402510 7402510 7402511 7402511 7402512 7402512 7605513 7605518 7605521 7605524 7755001 7755002 7755003 8153003 8153012 8156009 8173024 680850801 680851001 680851101 680851201 680853601 Oils & Chemicals PAGE K-410 K-414 K-413 K-413 K-410 K-413 K-413 K-413 K-415 K-415 K-416 K-416 K-259 K-259 K-259 K-259 K-360 K-360 K-360 K-360 K-360 K-360 K-360 K-360 K-360 K-360 K-360 K-418 K-418 K-418 K-418 K-418 K-418 K-418 K-418 K-418 K-418 K-400 K-401 K-68 K-68 K-68 K-68 K-68 K-68 K-68 K-68 K-68 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-65 K-59 K-59 Accessories, Supplies & Commodities PART NO. 106491 106608 106609 106719 106879 106885 107489 107491 107494 107496 107499 107501 116003 116004 116005 116007 180376 180384 180394 180396 180406 180414 180416 180418 180420 180422 180424 202940 202940 202941 202941 202942 202942 202943 202943 202944 202944 441601 441901 6204001 6804500 6804501 6804502 6804503 6804504 6804505 6804506 6804510 6804527 6804527 6804530 6804531 6804532 6804546 6808507 6808510 6808517 6808517 7002000 7002001 Tools & Instruments PAGE K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-414 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-417 K-408 K-410 K-410 K-409 Refrigeration PART NO. 104564 104565 104566 104567 104568 104569 104570 104571 104572 104573 104574 104575 104576 104577 104578 104579 104580 104581 104582 104583 104584 104585 104586 104587 104588 104589 104590 104591 104592 104593 104594 104595 104596 104597 104598 104599 104600 104601 104602 104603 104604 104605 104606 104607 104608 104609 104610 104611 104612 104613 104614 104615 104616 104617 104618 104619 105760 106407 106408 106421 Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 10 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index PART NO. 031593-10 031593-11 031593-11 031593-12 031593-12 031593-13 031593-13 031593-14 031593-14 031593-15 031593-15 031653-01 031653-02 031653-03 031653-04 031653-05 031653-06 031653-07 031653-08 031653-09 031653-10 031653-11 031805-03 031805-03 031810-00 031812-00 031858-00 031868-00 031869-00 031889-00 031919-00 032040-00 032040-00 032055-10 032056-10 032057-10 032083-00 032083-00 032092-00 032099-00 032099-00 032099-00 032099-00 032104-00 032104-00 032104-01 032104-01 032133-00 032134-01 032142-00 032143-00 032144-00 032145-00 032145-00 032145-00 032159-00 032159-00 032169-00 032169-00 032200-00 PAGE K-380 K-379 K-380 K-379 K-380 K-379 K-380 K-379 K-380 K-379 K-380 K-378 K-378 K-378 K-378 K-378 K-378 K-378 K-378 K-378 K-378 K-378 K-391 K-391 K-386 K-386 K-386 K-385 K-385 K-385 K-386 K-391 K-391 K-394 K-394 K-394 K-388 K-388 K-392 K-387 K-387 K-387 K-387 K-378 K-378 K-378 K-378 K-392 K-392 K-392 K-392 K-392 K-391 K-391 K-392 K-387 K-387 K-387 K-387 K-387 PART NO. 032200-00 032231-00 032231-00 032F1004 032F1157 032F1162 032F1164 032F1165 032F1166 032F1168 032F1169 032F1171 032F1172 032F1174 032F1176 032F1177 032F1178 032F1185 032F1187 032F1188 032F1189 032F1190 032F1193 032F1194 032F2272 032F7100 032F7105 032F7110 032F7111 032F7115 032F7116 032F7117 032F7117 032F7120 032F7121 032F7122 032F7123 032F7125 032F7130 032F7135 032F7145 032F7146 032F8058 032F8071 032F8078 032F8087 032F8089 032F8106 032F8115 033000-032 033000-032 033000-0329 033000-0329 033000-052 033000-052 033000-0525 033000-0525 033000-0529 033000-0529 033000-053 PAGE K-387 K-389 K-389 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 PART NO. 033000-053 033000-0539 033000-0539 033000-082 033000-082 033000-0825 033000-0825 033000-0829 033000-0829 033000-083 033000-083 033000-0839 033000-0839 033000-084 033000-084 033000-0849 033000-0849 033000-162 033000-162 033000-1625 033000-1625 033000-1629 033000-1629 033000-163 033000-163 033000-1639 033000-1639 033000-164 033000-164 033000-1649 033000-1649 033000-165 033000-165 033000-1659 033000-1659 033000-303 033000-303 033000-3039 033000-3039 033000-304 033000-304 033000-3049 033000-3049 033000-305 033000-305 033000-3059 033000-3059 033000-3079 033000-3079 033000-413 033000-413 033000-414 033000-414 033000-4149 033000-4149 033000-415 033000-415 033000-4159 033000-4159 033000-4179 K-1H PAGE K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 K-375 K-376 PART NO. 033000-4179 033000-7569 033000-7569 033000-7579 033000-7579 033000-7599 033000-7599 033070-1639 033070-1639 033070-3039 033070-3039 034L0021 034L0022 034L0023 034L0025 034L0026 034L0029 034L0032 034L0041 034L0042 034L0043 034L0045 034L0046 034L0049 034L0052 034L0091 034L0091 034L0093 034L0094 034L0095 034L0097 034L0100 034L0141 034L0142 034L0143 034L0144 034L0147 034L0171 034L0172 034L0173 034L0177 034N0081 034N0082 034N0083 034N0084 040077-01 040077-06 040077-07 040077-08 040084-01 040206-05 040206-06 040206-16 040206-20 040206-21 040206-22 040206-28 040206-33 040206-35 040206-44 PAGE K-375 K-376 K-375 K-376 K-375 K-375 K-376 K-375 K-376 K-375 K-376 K-28 K-28 K-28 K-28 K-28 K-28 K-28 K-32 K-32 K-32 K-32 K-32 K-32 K-32 K-29 K-29 K-29 K-29 K-29 K-29 K-29 K-30 K-30 K-30 K-30 K-30 K-33 K-33 K-33 K-33 K-31 K-31 K-31 K-31 K-368 K-368 K-368 K-368 K-368 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 PART NO. 040206-46 040222-02 040222-04 040222-05 040222-06 040223-02 040223-04 040223-05 040223-06 040241-01 040241-02 040241-03 040241-04 040241-05 040242-01 040242-02 040242-04 040242-05 040246-10 040262-01 040262-02 040270-01 040279-01 040281-01 040281-02 040282-01 040282-02 040283-01 040283-02 040289-01 040289-02 040289-04 040289-05 040290-01 040290-02 040290-04 040290-05 040293-01 040293-03 040293-04 040294-01 040294-02 040295-01 040295-02 040296-01 040297-01 040298-01 040299-01 040299-03 040299-04 040299-05 040303-01 040311-01 040314-01 040315-01 040315-02 040316-01 040316-02 040317-01 040317-02 PAGE K-366 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-366 K-366 K-366 K-368 K-368 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-368 K-368 K-368 K-368 K-368 K-370 K-370 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-368 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 11 K-1i PAGE K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 Motors PART NO. 067L1031 067L1034 067L1035 067L1038 067L1039 067L1041 067L1045 067L1050 067L1053 067L1054 067L1075 067L1079 067L1084 067L1087 067L1088 067L1091 067L1092 067L1093 067L1094 067L1097 067L1103 067L1106 067L1121 067L1124 067L1128 067L1129 067L1130 067L1131 067L1134 067L1135 067L1138 067L1139 067L1141 067L1145 067L1150 067L1153 067L1154 067L1175 067L1179 067L1184 067L1187 067L1188 067L1191 067L1192 067L1193 067L1194 067L1197 067L1199 067L3005 067L3006 067L3009 067L3012 067L3015 067L3016 067L3019 067L3043 067L3044 067L3051 067L3054 067L3063 Electrical PAGE K-35 K-35 K-51 K-51 K-35 K-35 K-35 K-35 K-51 K-36 K-36 K-36 K-36 K-36 K-36 K-36 K-36 K-36 K-36 K-36 K-36 K-36 K-36 K-36 K-36 K-36 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-38 K-51 K-142 K-143 K-220 K-20 K-20 K-20 K-20 K-20 K-20 K-20 Heating Components PART NO. 060-5241 060-5242 060-5242 060-5246 060-5247 060-5248 060-5249 060-5250 060-5250 060B200166 060B200266 060B200366 060B200666 060B200766 060B200866 060B201266 060B205066 060B205166 060B205366 060B205466 060B205666 060B205766 060B205866 060B205966 060B210966 060B215066 060L5201 060L5202 060L5203 060L5204 060L5205 060L5206 060L5207 060L5208 060L5209 060L5210 060L5211 060L5212 060L5213 060L5214 060L5215 060L5216 060L5217 060L5218 060L5219 060L5220 060L5221 060L5222 060L5223 061F6050 063274 064268 064427 067L1003 067L1006 067L1021 067L1024 067L1028 067L1029 067L1030 Indoor Air Quality PAGE K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-22 K-390 K-389 K-401 K-400 K-389 K-401 K-400 K-399 K-400 K-399 K-400 K-400 K-400 K-391 K-391 K-389 K-390 K-390 K-391 K-391 K-399 K-400 K-400 K-388 K-388 K-393 K-393 K-388 K-388 K-388 K-388 K-392 K-392 K-401 K-145 K-35 K-35 K-35 K-51 K-35 K-35 K-35 K-35 K-35 K-35 Thermostats PART NO. 041426-05 041436-02 041436-06 041438-01 041439-03 041448-01 041449-03 042H1178 042H1179 042H1185 042H1186 042H1187 042H1187 042H1188 042H1188 053776-00 053817-01 053830-01 054139-00 054625-01 054745-01 054816-01 054-816-02 054816-02 054-816-03 054816-03 054816-06 054816-10 056156-01 056156-01 056242-03 056243-03 056243-04 056244-01 056244-01 056-822-00 056822-00 057073-01 057404-00 057404-00 057945-00 057945-02 058066-00 058066-00 058066-00 058066-00 058070-01 058198-01 058307-00 058573 060-5231 060-5232 060-5233 060-5233 060-5234 060-5235 060-5236 060-5237 060-5239 060-5240 Oils & Chemicals PAGE K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-362 K-366 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 K-364 Accessories, Supplies & Commodities PART NO. 040361-03 040362-03 040362-05 040363-05 040363-07 040364-07 040367-01 040368-01 040368-04 040374-01 040374-02 040374-04 040374-06 040374-07 040379-01 040379-02 040379-04 040379-05 040380-01 040380-02 040380-04 040380-05 040406-09 040406-13 040406-15 040407-09 040407-11 040407-15 040408-13 040413-05 040413-07 040414-01 040415-15 040416-09 040416-11 040416-13 040416-15 040417-09 040417-10 040417-11 040432-01 040587-01 040587-02 040588-01 040588-02 040634-01 040634-02 040635-01 040635-02 040725-01 040725-02 040726-01 040726-02 040727-01 040728-01 040769-01 040770-01 040771-01 040772-01 041426-01 Tools & Instruments PAGE K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-366 K-368 K-368 K-368 K-368 K-368 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-370 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-371 K-366 K-366 K-366 K-366 K-366 K-366 K-366 Refrigeration PART NO. 040318-01 040318-02 040320-01 040320-02 040322-01 040322-04 040322-05 040322-07 040326-01 040326-03 040326-05 040327-01 040328-01 040329-01 040329-02 040330-01 040330-02 040331-01 040331-02 040332-01 040332-02 040333-01 040333-02 040333-03 040333-04 040334-01 040334-02 040334-03 040334-04 040335-01 040335-02 040335-03 040335-04 040336-01 040336-02 040336-03 040336-04 040337-01 040337-02 040337-03 040337-04 040338-01 040338-02 040338-03 040338-04 040339-01 040339-02 040339-03 040339-04 040340-01 040340-02 040340-03 040340-04 040349-05 040349-07 040350-05 040350-07 040351-05 040351-07 040358-02 Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 12 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index PART NO. 067L3070 067L3073 067L3074 067L3075 067L3078 067L3079 067L3105 067L3106 067L3109 067L3112 067L3115 067L3116 067L3119 067L3124 067L3127 067L3143 067L3144 067L3147 067L3148 067L3151 067L3154 067L3170 067L3173 067L3174 067L3175 067L3178 067L3179 067L5856 067L5857 067L5858 067L5859 067L5955 067L5956 067L5957 068-2002 068-2002 068-2002 068-2002 068-2003 068-2003 068-2003 068-2003 068-2006 068-2006 068-2006 068-2006 068-2007 068-2007 068-2007 068-2007 068-2008 068-2008 068-2008 068-2008 068-2009 068-2009 068-2009 068-2009 068-2010 068-2010 PAGE K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-20 K-11 K-11 K-11 K-11 K-11 K-11 K-11 K-11 K-14 K-16 K-15 K-11 K-14 K-16 K-15 K-11 K-14 K-16 K-15 K-11 K-14 K-16 K-15 K-11 K-14 K-16 K-15 K-11 K-14 K-16 K-15 K-11 K-14 PART NO. 068-2010 068-2010 068-2015 068-2015 068-2015 068-2015 068-2089 068-2090 068-2091 068-2092 068-2093 068-2094 068-2095 068-2096 068H6100 068H6101 068H6102 068H6103 068H6104 068H6105 068H6134 068H6200 068H6201 068H6202 068H6203 068H6204 068H6205 068H6234 068H7100 068H7102 068H7104 068H7106 068H7108 068H7110 068H7112 068H7114 068H7116 068H7118 068H7120 068H7122 068H7124 068H7130 068H7132 068H7134 068H7136 068H7138 068H7140 068H7142 068H7144 068H7146 068H7148 068H7150 068H7152 068H7154 068U0015 068U1030 068U1030 068U1030 068U1031 068U1031 PAGE K-16 K-15 K-11 K-14 K-16 K-15 K-14 K-14 K-14 K-14 K-14 K-14 K-14 K-14 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-18 K-16 K-16 K-16 K-12 K-16 K-16 PART NO. 068U1031 068U1032 068U1032 068U1032 068U1033 068U1033 068U1033 068U1034 068U1034 068U1034 068U1035 068U1035 068U1035 068U1036 068U1036 068U1036 068U1037 068U1037 068U1037 068U1038 068U1038 068U1038 068U1039 068U1039 068U1039 068U1958 068U1959 068U1960 068U1961 068U1962 068U1963 068U1973 068U1974 068U1975 068U2020 068U2021 068U2022 068U2023 068U2024 068U2025 068U2026 068U2027 068U2028 068U2029 068U2030 068U2031 068U2032 068U2057 068U2058 068U2059 068U2060 068U2061 068U2062 068U2063 068U2064 068U2070 068U2071 068U2072 068U2073 068U2074 PAGE K-12 K-16 K-16 K-12 K-16 K-16 K-12 K-16 K-16 K-12 K-16 K-16 K-12 K-16 K-16 K-12 K-16 K-16 K-12 K-16 K-16 K-12 K-16 K-16 K-12 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-1J PART NO. 068U2075 068U2094 068U2095 068U2096 068U2097 068U2098 068U2099 068U2103 068U2104 068U2105 068U2106 068U2107 068U2108 068U2109 068U2110 068U2111 068U2157 068U2159 068U2160 068U2161 068U2162 068U2163 068U2164 068U2179 068U2180 068U2181 068U2182 068U2183 068U2204 068U2205 068U2205 068U2206 068U2207 068U2207 068U2212 068U2213 068U2214 068U2215 068U2234 068U2235 068U2235 068U2236 068U2237 068U2237 068U2242 068U2243 068U2244 068U2245 068U2284 068U2285 068U2285 068U2286 068U2287 068U2287 068U2292 068U2293 068U2294 068U2295 068U2316 068U2317 PAGE K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-13 K-12 K-12 K-16 K-12 K-12 K-16 K-12 K-12 K-12 K-12 K-12 K-12 K-16 K-12 K-12 K-16 K-12 K-12 K-12 K-12 K-12 K-12 K-16 K-12 K-12 K-16 K-12 K-12 K-12 K-12 K-12 K-12 PART NO. 068U2318 068U2319 068Z3206 068Z3206 068Z3207 068Z3208 068Z3209 068Z3209 068Z3210 068Z3211 068Z3224 068Z3225 068Z3228 068Z3229 068Z3346 068Z3346 068Z3347 068Z3348 068Z3348 068Z3349 068Z3392 068Z3393 068Z3400 068Z3400 068Z3401 068Z3402 068Z3403 068Z3403 068Z3404 068Z3405 068Z3406 068Z3407 068Z3410 068Z3411 069G4001 069G4002 069G4003 069G4004 06DA680063 070132-01 070132-02 070133-03 070135-01 070135-02 070135-03 070135-03 070276-01 070276-02 070276-03 070278-11 070280-17 070281-01 070282-02 070284-04 070289-13 070293-01 070294-02 070295-03 070296-04 085552-03 PAGE K-12 K-12 K-11 K-16 K-11 K-11 K-11 K-16 K-11 K-11 K-11 K-11 K-11 K-11 K-11 K-16 K-11 K-11 K-16 K-11 K-11 K-11 K-11 K-16 K-11 K-11 K-11 K-16 K-11 K-11 K-11 K-11 K-11 K-11 K-31 K-31 K-31 K-31 K-307 K-373 K-373 K-373 K-373 K-373 K-373 K-373 K-385 K-385 K-385 K-373 K-373 K-373 K-373 K-373 K-373 K-373 K-373 K-373 K-373 K-385 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 13 K-1K PAGE K-462 K-461 K-461 K-490 K-490 K-490 K-2 K-5 K-2 K-2 K-2 K-2 K-6 K-2 K-2 K-2 K-6 K-2 K-2 K-2 K-6 K-2 K-2 K-2 K-6 K-2 K-2 K-2 K-4 K-4 K-4 K-7 K-2 K-2 K-2 K-7 K-2 K-2 K-2 K-7 K-2 K-2 K-2 K-7 K-2 K-2 K-2 K-4 K-4 K-4 K-8 K-2 K-2 K-2 K-8 K-2 K-2 K-2 K-8 K-2 Motors PART NO. 217-N 234A-4 234A-6 26439-1 26446-1 26447-1 264CT554WC 26CAKD-125 26CAKD-125 26CB1254AC 26CB1254AHK 26CB1254AK 26CB1254R 26CB1254RC 26CB1254RHK 26CB1254RK 26CB1254W 26CB1254WC 26CB1254WHK 26CB1254WK 26CB1255R 26CB1255RC 26CB1255RHK 26CB1255RK 26CB1255W 26CB1255WC 26CB1255WHK 26CB1255WK 26CB230 26CB310 26CB400 26CB451A 26CB451AC 26CB451AHK 26CB451AK 26CB451W 26CB451WC 26CB451WHK 26CB451WK 26CB454A 26CB454AC 26CB454AHK 26CB454AK 26CB454W 26CB454WC 26CB454WHK 26CB454WK 26CB550 26CB650 26CB650D 26CB654A 26CB654AC 26CB654AHK 26CB654AK 26CB654R 26CB654RC 26CB654RHK 26CB654RK 26CB654W 26CB654WC Electrical PAGE K-51 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-56 K-463 K-463 K-246 K-246 K-263 K-263 K-259 K-259 K-259 K-259 K-259 K-259 K-461 K-461 K-461 K-461 K-461 K-461 K-462 K-462 K-462 K-462 K-260 K-260 K-260 K-260 K-461 K-461 K-461 K-461 K-461 K-461 K-462 K-462 Heating Components PART NO. 191U138110 191U196000 191U196100 191U196200 191U196300 191U196400 191U196500 191U196600 191U196700 191U196800 191U197000 191U197100 191U197200 191U197300 191U197400 191U197500 191U197600 191U197700 191U197800 191U197900 191U198000 191U198100 191U198200 191U198300 191U198500 191U198600 192C-13S 193C-15S 2-009-037 2-009-046 2030-AA 2030-BA 205-1-1/8 205-1-3/8 205-1-5/8 205-2-1/8 205-2-5/8 205-7/8 214-4 214-4S 214-4ST 214-6 214-6S 214-6ST 214X2-4 214X2-4S 214X2-6S 214X7-4S 215-1-1/8 215-1-3/8 215-1-5/8 215-7/8 215-8 215-8S 215-8ST 216-10 216-10S 216-10ST 216X7-10S 217-14S Indoor Air Quality PAGE K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-56 K-56 K-56 K-56 K-260 K-260 K-260 K-260 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-463 K-463 K-463 K-463 K-463 K-463 K-54 K-54 K-54 K-54 K-54 K-54 K-57 K-57 K-57 K-57 K-57 K-57 K-57 K-58 K-58 K-58 K-58 K-58 K-58 K-58 K-50 K-51 K-50 Thermostats PART NO. 119-7460 119-7461 119-7462 119-7463 119-7464 119-7465 119-7466 119-7467 119-7468 119-7469 119-7470 119-7471 119-8000 119-8001 119-8002 119-8003 120-1/2 120-3/8 120-5/8 120-7/8 125385-A 125426-A 125467-A 151370-A 151550-A 151555-A 151560-A 168718-A 168788-A 168792-A 168794-A 185C-14S 186C-11S 187C-13S 188C-15S 190C-14S 191C-11S 191U012501 191U012600 191U012800 191U012900 191U013601 191U013701 191U130701 191U131001 191U131101 191U131201 191U131301 191U131601 191U131701 191U137020 191U137120 191U137320 191U137420 191U137620 191U137820 191U137920 191U138101 191U138101 191U138110 Oils & Chemicals PAGE K-57 K-58 K-58 K-58 K-58 K-58 K-58 K-59 K-59 K-59 K-59 K-59 K-59 K-54 K-54 K-52 K-52 K-52 K-52 K-52 K-52 K-50 K-51 K-50 K-51 K-50 K-51 K-50 K-51 K-50 K-51 K-50 K-51 K-51 K-51 K-51 K-51 K-52 K-52 K-52 K-52 K-52 K-52 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 K-53 Accessories, Supplies & Commodities PART NO. 119-3183 119-3250 119-3256 119-3257 119-3260 119-3263 119-3264 119-3303 119-3305 119-3306 119-3309 119-3311 119-3313 119-3361 119-3362 119-3609 119-3609 119-3610 119-3610 119-3611 119-3611 119-3624 119-3624 119-3625 119-3625 119-3626 119-3626 119-3634 119-3634 119-3637 119-3637 119-3638 119-3638 119-3643 119-3644 119-3670 119-3671 119-3977 119-3977 119-3978 119-3978 119-5400 119-5401 119-7443 119-7444 119-7445 119-7446 119-7447 119-7448 119-7449 119-7450 119-7451 119-7452 119-7453 119-7454 119-7455 119-7456 119-7457 119-7458 119-7459 Tools & Instruments PAGE K-385 K-385 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-382 K-398 K-398 K-398 K-124 K-124 K-123 K-123 K-124 K-124 K-461 K-461 K-461 K-461 K-51 K-51 K-260 K-260 K-260 K-260 K-50 K-51 K-50 K-51 K-50 K-51 K-57 K-57 K-57 K-57 K-57 K-57 K-57 K-57 K-57 K-57 K-57 K-57 Refrigeration PART NO. 085638-01 088269-02 089021-01 089021-02 089021-03 089021-04 089021-05 089021-06 089021-07 089021-08 089021-09 089021-10 089021-11 089021-12 089021-13 089021-14 089021-15 089021-16 089021-17 089021-18 089021-19 089021-20 089021-21 089350-00 089351-00 089379-00 097708 097709 097710 097711 097714 097715 114-4B 114-6B 114-6S 115-8S 118U0522 118U0534 119-1/4 119-1/4 119-3/8 119-3/8 119-3094 119-3094 119-3095 119-3095 119-3096 119-3096 119-3152 119-3158 119-3160 119-3169 119-3170 119-3171 119-3172 119-3175 119-3176 119-3177 119-3181 119-3182 Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 14 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index PART NO. 26CB654WHK 26CB654WK 26CB950 26CB950D 26CK101A50 26CK101A50 26CRC114AP 26CRC214AP 26CRC314AP 26CRC524AP 26CT351A 26CT351AC 26CT351AHK 26CT351AK 26CT351W 26CT351WC 26CT351WHK 26CT351WK 26CT354A 26CT354AC 26CT354AHK 26CT354AK 26CT354W 26CT354WC 26CT354WHK 26CT354WK 26CT551A 26CT551AC 26CT551AHK 26CT551AK 26CT551R 26CT551W 26CT551WC 26CT551WHK 26CT551WK 26CT554A 26CT554AC 26CT554AHK 26CT554AK 26CT554W 26CT554WHK 26CT554WK 271-51 27394-1 290C-14S 291C-11S 292C-13S 293C-15S 294C-21S 295C-25S 296C-31S 297C-35S 2CFA-10S 2CFA-12S 2CFA-14S 2CFA-18S 3-009-308 3-019-908 3-019-910 3-019-912 PAGE K-2 K-2 K-4 K-4 K-4 K-2 K-4 K-4 K-4 K-4 K-5 K-2 K-2 K-2 K-5 K-2 K-2 K-2 K-5 K-2 K-2 K-2 K-5 K-2 K-2 K-2 K-9 K-2 K-2 K-2 K-9 K-9 K-2 K-2 K-2 K-9 K-2 K-2 K-2 K-9 K-2 K-2 K-311 K-490 K-463 K-463 K-463 K-463 K-463 K-463 K-463 K-463 K-468 K-468 K-468 K-468 K-246 K-246 K-246 K-246 PART NO. 3-030-140 3-030-141 3-030-142 3-030-143 3-030-150 3-033-201 3-033-202 3-033-203 3-033-204 3-033-205 3-033-206 3-033-207 3-033-208 3-033-209 3-033-212 3-033-218 3-033-219 3-033-226 3-033-228 3-033-242 3-033-244 3-033-245 3-033-246 3-033-253 3-044-001 3155W-D 3155W-E 3155W-F 3CFA-10S 3CFA-14S 3CFA-18S 3CFA-22S 3CFA-26S 3CFA-34S 3CFA-8S 4001-00 4001-00B 4001-00M 4002-71 4002-71B 4003-00 4003-00M 4003-00S 4003-00SB 4003-00SM 4004-06S 4004-71 4004-715 4004-71B 4004-71M 4005-00B 4005-00B 4005-00S 4006-71S 4007-06S 4007-06SB 4008-20S 4011-00 4011-00P 4013-00 PAGE K-246 K-246 K-246 K-246 K-246 K-255 K-255 K-255 K-255 K-255 K-255 K-255 K-255 K-255 K-255 K-255 K-255 K-256 K-255 K-255 K-255 K-257 K-255 K-255 K-257 K-465 K-465 K-465 K-468 K-468 K-468 K-468 K-468 K-468 K-468 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-357 PART NO. 4013-00P 4013-00S 4014-71 4014-71P 4014-71S 42BF15AF 42BF15AG 42BF15AJ 42BF25AG 42BF35AF 42BF35AG 42BF35AJ 42CF15AF 42CF15AG 42CF15AJ 42CF25AF 42CF25AJ 42CF35AF 42CF35AG 42CF35AJ 42DF35AF 42DF35AG 42DF35AJ 42EF35AF 42EF35AG 42EF35AH 42EF35AJ 42FE35AF106 42FE35AG106 42FE35AH106 42FE35AJ106 42GE35AF106 42GE35AG106 42GE35AH106 42GE35AJ106 42HF35AF 42HF35AG 42HF35AH 42IF35AF 42IF35AG 42IF35AH 45AF35AF 45AF35AG 45AF35AJ 45DG20AF 45DG20AG 45DG20AJ 45EG10AF 45EG10AG 45EG10AJ 45EG20AF 45EG20AG 45EG20AJ 45GG20AF 45GG20AG 45GG20AJ 49ACR6 49ACRC 49ACRO 49CE42SPDT K-1L PAGE K-357 K-357 K-357 K-357 K-357 K-230 K-230 K-230 K-230 K-230 K-230 K-230 K-230 K-230 K-230 K-230 K-230 K-230 K-230 K-230 K-230 K-230 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 K-231 PART NO. 49D22125001 49D22125002 49D36098001 49D36098003 49D54682NC 49D54682NO 5220N 5221N 5221N 5223N 5223N 5231AN 5231AN 5231BN 5231BN 5240N1/2 5240N1/25242N3/4 5242N3/4 5244-1 5244-1 5244N1 5244N1 5246N1 5246N1 5246N1-1/4 526E 526E 527E 527E 5340N1/2 5340N1/2 5342N3/4 5342N3/4 5344-1 5344-1 5344N1 5345N 5346N1-1/4 5525-235-CE 5525-300-CE 5525-350-CE 5525-400-CE 5525-450-CE 5526-150-CE 5526-250-CE 5526-300-CE 5526-350-CE 5526-375-CE 5526-400-CE 5526-450-CE 5527-150-CE 5527-250-CE 5527-300-CE 5527-350-CE 5527-400-CE 5527-450-CE 5528-150-CE 5528-250-CE 5528-300-CE 5528-350-CE PAGE K-231 K-231 K-231 K-231 K-231 K-231 K-266 K-266 K-267 K-266 K-267 K-266 K-267 K-267 K-266 K-266 K-267 K-266 K-266 K-267 K-266 K-267 K-266 K-267 K-266 K-266 K-267 K-266 K-267 K-267 K-266 K-266 K-267 K-266 K-267 K-266 K-266 K-266 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 K-268 PART NO. 5529-150-CE 5529-175-CE 5529-250-CE 5529-300-CE 5611N 5612N 5614N 5710058P01 5710058P02 5710058P03 5710058P04 5710058P05 586WA-10ST 586WA-4ST 586WA-6ST 586WA-8ST 586WAS-10ST 586WAS-6ST 586WAS-8ST 587WA-12ST 587WA-14ST 587WAS-14ST 591WA-11ST 591WAS-11ST 592WA-13ST 592WAS-13ST 593WA-15ST 593WAS-15ST 594WA-21ST 594WA-25ST 594WA-31ST 594WAS-21ST 595WA-25ST 595WAS-25ST 596WA-31ST 596WA-35ST 596WA-41ST 596WAS-31ST 5CFA-34S 5CFA-42S 5CFA-50S 600AX7-JB 600B-4U4 600B-6U6 617A-10S4 617A-10S6 617A-4S4 617A-6S4 617A-6S6 617A-8S4 617A-8S6 6231N 6232N 6233N 6234N 6261N 6263N 6264N 6265N 6266N PAGE K-268 K-268 K-268 K-268 K-266 K-266 K-266 K-68 K-68 K-68 K-68 K-68 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-460 K-468 K-468 K-468 K-467 K-467 K-467 K-467 K-467 K-467 K-467 K-467 K-467 K-467 K-261 K-261 K-261 K-261 K-261 K-261 K-261 K-261 K-261 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 15 K-1M PAGE K-337 K-337 K-338 K-338 K-344 K-344 K-337 K-337 K-337 K-337 K-337 K-337 K-337 K-337 K-337 K-337 K-337 K-337 K-337 K-337 K-346 K-346 K-346 K-346 K-277 K-277 K-277 K-271 K-277 K-271 K-271 K-273 K-271 K-271 K-271 K-272 K-271 K-273 K-277 K-277 K-273 K-273 K-271 K-271 K-271 K-271 K-271 K-271 K-271 K-271 K-273 K-271 K-272 K-278 K-278 K-274 K-274 K-274 K-278 K-274 Motors PART NO. A17545 A17546 A17810 A17811 A17834 A17840 A17859 A17860 A17861 A17862 A17863 A17864 A17865 A17866 A17867 A17868 A17869 A17870 A17871 A17872 A17921 A17922 A17923 A17924 A19AAB-10C A19AAB-4C A19AAB-7C A19AAC-4C A19AAC-9C A19AAD-12C A19AAD-5C A19AAE-3C A19AAF-12C A19AAF-20C A19AAF-21C A19AAF-4C A19ABA-40C A19ABB-2C A19ABB-2C A19ABB-7C A19ABC-11C A19ABC-12C A19ABC-24C A19ABC-36C A19ABC-37C A19ABC-4C A19ABC-74C A19ACA-14C A19ACA-15C A19ADB-1C A19ADB-2C A19ADN-1 A19ANC-1C A19AUC-1C A19AUC-1C A19BAB-3C A19BAC-1C A19BAF-1C A19BAG-1C A19BBC-2C Electrical PAGE K-336 K-336 K-336 K-336 K-336 K-336 K-336 K-336 K-336 K-336 K-347 K-351 K-347 K-351 K-347 K-351 K-348 K-351 K-348 K-351 K-348 K-351 K-348 K-351 K-348 K-351 K-348 K-351 K-348 K-351 K-348 K-351 K-348 K-351 K-348 K-351 K-348 K-351 K-349 K-351 K-349 K-351 K-349 K-351 K-349 K-351 K-349 K-351 K-349 K-351 K-349 K-351 K-341 K-344 K-341 K-349 K-351 K-341 K-341 K-339 Heating Components PART NO. A15622 A15623 A15628 A15629 A15630 A15631 A15632 A15633 A15634 A15635 A16302 A16302 A16303 A16303 A16304 A16304 A16307 A16307 A16308 A16308 A16309 A16309 A16310 A16310 A16311 A16311 A16312 A16312 A16313 A16313 A16314 A16314 A16315 A16315 A16316 A16316 A16317 A16317 A16321 A16321 A16324 A16324 A16365 A16365 A16366 A16366 A16367 A16367 A16493 A16493 A16496 A16496 A17429 A17430 A17474 A17496 A17496 A17502 A17503 A17506 Indoor Air Quality PAGE K-340 K-340 K-340 K-341 K-339 K-339 K-339 K-358 K-342 K-342 K-342 K-342 K-342 K-342 K-342 K-342 K-342 K-342 K-342 K-342 K-340 K-351 K-349 K-351 K-348 K-351 K-344 K-344 K-344 K-344 K-344 K-344 K-344 K-344 K-344 K-344 K-342 K-342 K-342 K-342 K-342 K-342 K-342 K-342 K-342 K-342 K-342 K-340 K-340 K-340 K-349 K-351 K-349 K-351 K-349 K-351 K-349 K-351 K-336 K-336 Thermostats PART NO. A13592 A13595 A13613 A13613 A13977 A13978 A13979 A1408-99 A14833 A14835 A14836 A14837 A14838 A14840 A14841 A14842 A-14848 A-14850 A-14851 A-14852 A15073 A15085 A15246 A15246 A15500 A15500 A15501 A15502 A15503 A15504 A15506 A15508 A15509 A15512 A15513 A15514 A15525 A15526 A15527 A15528 A15529 A15530 A15531 A15539 A15540 A15541 A15542 A15580 A15581 A15582 A15586 A15586 A15587 A15587 A15588 A15588 A15589 A15589 A15620 A15621 Oils & Chemicals PAGE K-463 K-464 K-463 K-464 K-352 K-352 K-352 K-352 K-352 K-352 K-463 K-464 K-463 K-463 K-463 K-463 K-463 K-353 K-353 K-353 K-353 K-353 K-353 K-353 K-353 K-353 K-463 K-463 K-463 K-464 K-464 K-464 K-464 K-464 K-464 K-464 K-464 K-464 K-464 K-464 K-340 K-340 K-68 K-68 K-68 K-340 K-341 K-340 K-341 K-340 K-341 K-271 K-349 K-351 K-339 K-339 K-341 K-340 K-341 K-340 Accessories, Supplies & Commodities PART NO. 802B-8S 802B-8ST 803B-10S 803B-10ST 8041-00 8041-20 8045-00 8045-20 8047-00 8047-20 804A-14S 804A-14ST 805C-14S 806C-11S 807C-13S 808C-15S 809C-21S 8141-00 8141-20 8143-00 8143-20 8145-00 8145-20 8245-00 8245-20 8247-20 884C-25S 885C-31S 886C-35S 900MA-10S 900MA-11S 900MA-12S 900MA-13S 900MA-14S 900MA-15S 900MA-21S 900MA-25S 900MA-4S 900MA-6S 900MA-8S A 04566 A 04597 A104174P01 A104174P02 A104174P03 A11030 A11030 A11031 A11031 A11042 A11042 A11A-1C A13166 A13166 A13183 A13220 A13502 A13503 A13503 A13591 Tools & Instruments PAGE K-261 K-261 K-261 K-261 K-261 K-261 K-261 K-261 K-261 K-261 K-465 K-465 K-465 K-261 K-261 K-261 K-261 K-261 K-261 K-261 K-52 K-52 K-52 K-52 K-52 K-52 K-52 K-52 K-52 K-52 K-52 K-52 K-65 K-65 K-357 K-357 K-357 K-357 K-357 K-357 K-357 K-262 K-262 K-262 K-262 K-262 K-262 K-262 K-262 K-262 K-262 K-264 K-264 K-463 K-463 K-464 K-463 K-463 K-464 K-463 Refrigeration PART NO. 6267N 6268N 6291N 6293N 6294N 6295N 6296N 6297N 6298N 6432N 6433-E 6433S-G 6433x1 6471N 6473N 6474N 6475N 6476N 6477N 6478N 6804501V06 6804501V06 6804502V09 6804502V09 6804503V04 6804503V04 6804504V05 6804504V05 6804505V07 6804505V07 6804506V02 6804506V02 6808507* 6808510* 7007-00 7007-06 7007-71 7008-00 7008-00B 7008-06 7008-71 7761-B 7763-B 7764-B 7766-B 7767-B 7768-AB 7768-B 7771-B 7792-B 7793-B 8021A 8022A 802B-4 802B-4S 802B-4ST 802B-6 802B-6S 802B-6ST 802B-8 Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 16 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index PART NO. A19BUC-2C A19CAC-1C A19CAC-2C A19DAC-1C A19KNC-1C A19PRC-1C A19ZBA-1C A19ZBC-2C A25 A25AN-1C A25AP-1C A25CN-1C A25CP-1C A28AA-4C A28AA-8C A28AA-8C A28AA-9C A28AA-9C A28AB-1C A28AB-2C(c) A28AK-1 A28AK-2 A28KA-1C A28MA-1C A28MA-2C A28PJ-1C A319ABC-12-01 A319ABC-24-01 A35 A350PS-1C A36AHA-50C(a) A36AHA-52C(a) A36AHA-58C(b) A36AHB-33C(b) A419ABC-1C A419ACE-IC A419GBF-1C A419GEF-1C A45 A454 A536 A537-W A55 A569 A70GA-1C(a) A70GA-2C A70HA-1C(a) A70HA-2C A70KA-1C A72AA-1C A72AA-2C A72AA-3C A72AA-4C A72AE-1C A72AP-1C A72CE-1C A99BA-200C A99BB-200C A99BB-25C A99BB-300C PAGE K-278 K-275 K-275 K-276 K-277 K-273 K-274 K-275 K-469 K-279 K-279 K-279 K-279 K-285 K-285 K-285 K-285 K-285 K-285 K-285 K-286 K-286 K-286 K-287 K-287 K-287 K-283 K-283 K-469 K-319 K-280 K-280 K-280 K-280 K-284 K-284 K-284 K-284 K-469 K-358 K-358 K-358 K-469 K-358 K-279 K-279 K-279 K-279 K-279 K-281 K-281 K-281 K-282 K-281 K-281 K-281 K-288 K-288 K-288 K-288 PART NO. A99BB-500C A99BB-600C A99BC-25C A99BC-300C A99-CLP-1 ADKS 40017T ADKS30013T ADKS30017T ADP11A-600R ADRHE-60/305ODF ADRHE-60/805ODF ADRHE-60/807ODF ADRHE-60/809ODF ADRP-30/304ODF ADRP-30/305ODF ADRP-30/804ODF ADRP-30/805ODF ADRPE-30/304ODF ADRPE-30/305ODF ADRPE-30/804ODF ADRPE-30/805ODF ADRS-20/305ODF ADRS-20/30ODF ADRS-20/804ODF ADRS-20/805ODF ADRSE-20/304ODF ADRSE-20/305ODF ADRSE-20/803ODF ADRSE-20/804ODF ADRSE-20/805ODF AG2 AG3 AG4 AG5 APD11A-600R AU17860 AU17861 AU17862 AU17863 AU17864 AU17865 AU17868 AU17871 AU17872 AY17861 AY17862 AY17863 AY17864 AY17865 AY17868 AY17871 AY17872 B32080 B32197 B32197 B32222 B32337 B32337 B32807 B32807 PAGE K-288 K-288 K-288 K-288 K-288 K-175 K-175 K-175 K-288 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-468 K-468 K-468 K-468 K-283 K-337 K-337 K-337 K-337 K-337 K-337 K-337 K-337 K-337 K-338 K-338 K-338 K-338 K-338 K-338 K-338 K-338 K-339 K-348 K-351 K-341 K-349 K-351 K-349 K-351 PART NO. B32808 B32808 B32930 B32930 B33367 B33367 B33568 B33568 B33569 B33569 B33572 B33572 B33746 B33752 B33753 B33754 B33755 B33770 B33770 B33771 B33784 B33784 B33788 B33788 B33793 B33793 B33794 B33794 B33813 B33813 B33837 B33842 B33842 B34183 B34183 B34235 B34236 B34237 B34238 B34239 B34240 B34241 B34254 B34287 B34314 B34314 B34315 B34315 B34412 B34413 B34414 B34415 B34416 B34417 B34418 B34429 B34429 B34444 B34479 B34497 K-1N PAGE K-349 K-351 K-349 K-351 K-348 K-351 K-349 K-351 K-349 K-351 K-349 K-351 K-344 K-344 K-344 K-344 K-344 K-349 K-351 K-351 K-349 K-351 K-349 K-351 K-350 K-351 K-350 K-351 K-349 K-351 K-341 K-349 K-351 K-350 K-351 K-336 K-336 K-336 K-336 K-336 K-336 K-336 K-341 K-341 K-349 K-351 K-349 K-351 K-345 K-345 K-345 K-345 K-345 K-345 K-345 K-349 K-351 K-344 K-345 K-350 PART NO. B34497 B34498 B34498 B34519 B34550 B34559 B34580 B34582 B34582 B34594 B34595 B34654 B34661 B34661 B34670 B34670 B34671 B34671 B34715 B34715 B34761 B34929 B34929 B34987 B34987 B34988 B34988 B35049 B35049 B35162 B35224 B35271 B35272 B35273 B35308 B35308 B35334 B35358 B35358 BKT287-1R BKT287-1R BKT287-2R BKT287-2R BKT38A-600R BKT38A-601R BOX10A-600R C-052-HH C-082-HH C-083-HH C-084-S-T-HH C102116901 C102120701 C102120703 C102122401 C102122402 C103100101 C-144-S-TT-HH C-145-S-TT-HH C-146-S-TT-HH C-147-S-TT-HH PAGE K-351 K-350 K-351 K-344 K-346 K-346 K-344 K-349 K-351 K-345 K-345 K-346 K-349 K-351 K-349 K-351 K-349 K-351 K-350 K-351 K-350 K-350 K-351 K-350 K-351 K-350 K-351 K-350 K-351 K-341 K-345 K-346 K-346 K-346 K-350 K-351 K-341 K-350 K-351 K-283 K-284 K-283 K-284 K-311 K-311 K-288 K-453 K-453 K-453 K-452 K-4 K-4 K-4 K-4 K-4 K-4 K-452 K-452 K-452 K-452 PART NO. C-149-S-TT-HH C-162-HH C-163-HH C-163-S-HH C-164-HH C-164-S-HH C-164-S-T-HH C-165-HH C-165-S-HH C-165-S-T-HH C-166-S-T-HH C-167-S-T-HH C-30013-G C-30017-G C-305-S-T-HH C-306-S-T-HH C-307-S-T-HH C-309-S-T-HH C-40017-G C-40021-G C-40025-G C-40029-G C-40033-G C-417-S-T-HH C-419-S-T-HH C-4311-S-T-HH C-4313-S-T-HH C-437-S-T-HH C-439-S-T-HH C-607-S-T-HH C-609-S-T-HH CD35 CD45 CD-48 CD55 CLEW100 CLEW22 CLEW28 CLEW44 CLEW50 CLEW88 CLK350-2C CLS1034P CLS2034P CLS3034P CLS4034P CLS5034P CMEW100 CMEW100 CMEW125 CMEW125 CMEW144 CMEW144 CMEW160 CMEW160 CMEW18 CMEW18 CMEW22 CMEW22 CMEW28 PAGE K-452 K-453 K-453 K-453 K-453 K-453 K-452 K-453 K-453 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-452 K-469 K-469 K-470 K-469 K-63 K-63 K-63 K-63 K-63 K-63 K-284 K-4 K-4 K-4 K-4 K-4 K-61 K-62 K-61 K-62 K-61 K-62 K-61 K-62 K-61 K-62 K-61 K-62 K-61 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 17 K-1O PAGE K-454 K-169 K-169 K-307 K-306 K-240 K-240 K-240 K-240 K-240 K-240 K-240 K-240 K-240 K-240 K-240 K-240 K-240 K-240 K-240 K-240 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-236 K-448 K-448 K-448 K-448 K-448 K-448 K-448 K-448 K-446 K-446 K-446 Motors PART NO. HPC-165-S-HH K-1112 K-1113 KITP545-82C KITP545-82C* KLT-12H KLT-12HH KLT-15M KLT-15MH KLT-2H KLT-2HH KLT-30M KLT-30MH KLT-4H KLT-4HH KLT-5M KLT-5MH KLT-60M KLT-60MH KLT-6H KLT-6HH KM2ST-2D KM2ST-2D KM2ST-2G KM2ST-2G KM2ST-2R KM2ST-2R KM2ST-3D KM2ST-3D KM2ST-3G KM2ST-3G KM2ST-4G KM2ST-4G KM2ST-CS KM2ST-CS KM2STST-2G KM2STST-2G KM2STu-1G KM2STu-1G KM2STu-2G KM2STu-2G KM2SW-1G KM2SW-2D KM2SW-2G KM2SW-2R KM2Sw-3D KM2SW-3G KM2SW-4G KM2SWSW-2G KM2SWu-1G KS-B10/E10 KS-B14/E14 KS-B19/E19 KS-B25/E25 KS-B34/E34 KS-B42/E42 KS-B6/E6 KS-B9/E9 KT-45-5-ZGA KT-45-ZGA KT-85-3-ZGA Electrical PAGE K-45 K-45 K-45 K-45 K-45 K-45 K-47 K-46 K-47 K-46 K-46 K-47 K-46 K-47 K-46 K-47 K-46 K-47 K-46 K-47 K-46 K-47 K-46 K-47 K-46 K-47 K-47 K-47 K-47 K-46 K-47 K-47 K-46 K-47 K-46 K-46 K-47 K-46 K-47 K-46 K-47 K-46 K-47 K-46 K-47 K-47 K-47 K-47 K-47 K-47 K-47 K-47 K-454 K-454 K-454 K-454 K-454 K-454 K-454 K-454 K-454 Heating Components PART NO. HCGC0055RW HCGC0055RW HCGC0075RW HCGC0075RW HCGC0100RW HCGC0100RW HCMC0025RW HCMC0025RW HCMC0033RW HCMC0033RW HCMC0050RW HCMC0050RW HCMC0060RW HCMC0060RW HCMC0075RW HCMC0075RW HCMC0100RW HCMC0100RW HCMC0150UW HCMC0150UW HCMC0225UW HCMC0225UW HCMC0275UW HCMC0275UW HCMC0300UW HCMC0300UW HCZC0225UW HCZC0275UW HCZC0300UW HGMC0200UW HGMC0200UW HGMC0400UW HGMC0400UW HGMC0500UW HGMC0500UW HGMC0700UW HGMC0700UW HGMC0900UW HGMC0900UW HGMC1000UW HGMC1000UW HGMC1200UW HGMC1200UW HGMC1350UW HGMC1350UW HGZC0400UW HGZC0500UW HGZC0700UW HGZC0900UW HGZC1000UW HGZC1200UW HGZC1350UW HPC-103 HPC-103-S HPC-104 HPC-104-S HPC-163-HH HPC-163-S-HH HPC-164-HH HPC-164-S-HH HPC-165-HH Indoor Air Quality PAGE K-316 K-316 K-316 K-316 K-317 K-317 K-470 K-352 K-352 K-352 K-352 K-352 K-352 K-352 K-352 K-269 K-233 K-233 K-233 K-233 K-237 K-237 K-237 K-237 K-237 K-237 K-237 K-237 K-237 K-237 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-234 K-290 K-290 K-290 K-290 K-290 K-290 K-45 K-45 Thermostats PART NO. F63BF-1C F92B-1C F92B-1C F92B-9C F93B-1C F93H-1C FC-48 FP-AFP-BFP-CFP-CFU-4BFU-4CFU-6CFU-6CG15 GM40 GM40Q GM40QW GM40W GMX digi 42-“X”-120 GMX digi 42-“X”-24 GMX digi 42-“X”-240 GMX digi20-“X”-120 GMX digi20-“X”-24 GMX digi20-“X”-240 GMX digi20-“X”-277 GMX2 digi 42-“X”-120 GMX2 digi 42-“X”-24 GMX2 digi 42-“X”-240 GMXQT-I-120 GMXQT-I-24 GMXQT-I-240 GMXQT-O-120 GMXQT-O-120 GMXQT-O-24 GMXQT-O-240 GMXQW-I-120 GMXQW-I-24 GMXQW-I-240 GMXQW-O-120 GMXST-I-120 GMXST-I-24 GMXST-I-240 GMXST-O-120 GMXST-O-24 GMXST-O-240 GMXSW-I-120 GMXSW-I-24 GMXSW-I-240 GMXSW-O-120 GMXSW-O-24 GMXSW-O-240 GRD10-1R GRD10A-600 GRD10A-601 GRD10A-606 GRD10A-608 GRD10A-609 HCGC0033RW HCGC0033RW Oils & Chemicals PAGE K-448 K-448 K-448 K-448 K-448 K-448 K-448 K-448 K-448 K-448 K-448 K-448 K-448 K-448 K-448 K-446 K-446 K-446 K-446 K-355 K-355 K-355 K-355 K-355 K-355 K-355 K-355 K-355 K-356 K-356 K-356 K-356 K-356 K-356 K-356 K-356 K-356 K-356 K-240 K-241 K-468 K-468 K-468 K-468 K-335 K-335 K-335 K-335 K-314 K-315 K-315 K-315 K-314 K-314 K-314 K-315 K-315 K-314 K-315 K-315 K-316 Accessories, Supplies & Commodities PART NO. E19S250 E19S270 E25S270 E25S290 E34S2110 E34S290 E3S120 E3S130 E42S2130 E42S2170 E5S120 E5S130 E6S130 E6S140 E9S240 EBSVE11CP1005/8X7/8O EBSVE-11-GA5/8X7/8OD EBSVE-8-CP1005/8X7/8 EBSVE-8-GA5/8X7/8ODF EC4000/120V EC4000/208-277V EC4000PC/120V EC4000PC/208EC4004/120V EC4004/208-277V EC4004PC/120V EC4004PC/208-277V EC4005PC/120,208-240V EC7000/120V EC7000/208-277V EC7000/24V EC7001/120V EC7001/208-277V EC7001/24V EC7001PC/12VDC EC7004/120V EC7004/208-277V EC7005PC/120V,208-240V ET616-CS ET724 F25A F35A F45A F55A F59A-1C F59A-2C F59D-5C F59H-1C F61KB-11C F61KD-3C F61KD-4C F61KD-8C F61LB-1C F61MB-1C F61MB-5C F61MD-1C F61MD-2C F61MG-1*C F62AA-8C F62AA-9C F63AC-1C Tools & Instruments PAGE K-62 K-61 K-62 K-61 K-62 K-61 K-62 K-61 K-62 K-61 K-62 K-60 K-60 K-60 K-60 K-60 K-60 K-60 K-60 K-60 K-60 K-60 K-60 K-307 K-358 K-468 K-468 K-468 K-468 K-237 K-237 K-237 K-238 K-238 K-238 K-238 K-238 K-238 K-238 K-238 K-238 K-238 K-238 K-238 K-238 K-238 K-459 K-459 K-232 K-232 K-232 K-232 K-232 K-232 K-232 K-232 K-232 K-232 K-448 K-448 K-448 Refrigeration PART NO. CMEW28 CMEW36 CMEW36 CMEW50 CMEW50 CMEW64 CMEW64 CMEW72 CMEW72 CMEW80 CMEW80 CMW100 CMW125 CMW144 CMW160 CMW18 CMW22 CMW28 CMW36 CMW50 CMW64 CMW72 CMW80 CST29A-600C D874-99 DF25A DF35A DF45A DF55A Digi 42/2-120 Digi 42/2-24 Digi 42/2-240 Digi 42A —120 Digi 42A —24 Digi 42A —240 Digi 42E —120 Digi 42E —24 Digi 42E —240 Digi20A —120 Digi20A —24 Digi20A —240 Digi20A —277 Digi20E —120 Digi20E —24 Digi20E —240 Digi20E —277 DRHE-6-55/70AR7X7 DRHE-6-55/70AR9X9 DT140Digi DT140Digi DTMV40 DTMV40-B DTMV40-M DTMV40-P DTQMV40 DTQMV40-B DTQMV40-M DTQMV40-P E10S240 E10S250 E14S250 Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 18 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index PART NO. PAGE KT-85-ZGA K-446 LCHC0060RW K-48 LCHC0060RW K-48 LCHC0075RW K-48 LCHC0075RW K-48 LCHC0100RW K-48 LCHC0100RW K-48 LCHC0150UW K-48 LCHC0150UW K-48 LCHC0200UW K-48 LCHC0200UW K-48 LCHC0300UW K-48 LCHC0300UW K-48 LGHC0400UW K-48 LGHC0400UW K-48 LGHC0600UW K-48 LGHC0600UW K-48 LGHC0750UW K-48 LGHC0750UW K-48 LT/LTZ100 K-69 LT/LTZ22 K-69 LT/LTZ28 K-69 LT/LTZ44 K-69 LT/LTZ50 K-69 LT/LTZ88 K-69 ME10S240 K-448 ME10S250 K-448 ME14S250 K-448 ME19S250 K-448 ME19S270 K-448 ME25S270 K-448 ME25S290 K-448 ME34S2110 K-448 ME34S290 K-448 ME42S2130 K-448 ME42S2170 K-448 ME6S130 K-448 ME6S140 K-448 ME9S240 K-448 MT/MTZ100 K-67 MT/MTZ125 K-67 MT/MTZ144 K-67 MT/MTZ160 K-67 MT/MTZ18 K-67 MT/MTZ22 K-67 MT/MTZ28 K-67 MT/MTZ32 K-67 MT/MTZ36 K-67 MT/MTZ40 K-67 MT/MTZ44 K-67 MT/MTZ50 K-67 MT/MTZ56 K-67 MT/MTZ64 K-67 MT/MTZ72 K-67 MT/MTZ80 K-67 OPTRONIC OP-02 K-254 OVE15CP1007/8X11/8O K-446 OVE15GA7/8X1-1/8ODF K-446 OVE20CP1007/8X1-3/8OD K-446 OVE20GA7/8X1-1/8ODF K-446 PART NO. OVE-20-GA7/8X7/8ODF OVE30CP1001-1/8X1-3/8O OVE30GA1-1/8X1-3/8OD OVE40CP10011/8X13/8O OVE40CP10011/8X15/8O OVE40GA1-1/8X1-3/8OD OVE40GA1-1/8X1-5/8OD OVE55CP10011/8X13/8O OVE55CP10011/8X15/8O OVE55GA1-1/8X1-3/8OD OVE55GA1-1/8X1-5/8OD OVE70CP10011/8X13/8O OVE70CP10011/8X15/8O OVE70GA1-1/8X1-3/8OD OVE70GA1-1/8X1-5/8OD OZE-20-GA OZE-35-GA P100AC-1C3 P100AC-2C3 P100AP-201C P100AP-2C P100AP-332C2 P100AP-3C P100AP-4C P100AP-9C1 P100CC-9C3 P100CP-1C P100CP-2C P100DA-1C P100DA-2C P100DA-35C P100DA-81C2 P100DC-3C 4 P128AA-17C(c) P128AA-1C(a) P128AA-2C(b) P12AA-3C P145NCA-12C(d) P145NCA-12C(d) P145NCA-82C(e) P145NCA-82C(h) P145NCB-12C(e) P145NCB-12C(f) P145NCB-82C(g) P145NCB-82C(I) P170AA-118C P170CA-3C P170DA-1C P170KA-1C P170LB-1 P170LB-6 P170MA-1 P170MA-18 P170NA-1 P170SA-1 P20BB-1C(a) P20DB-1C(b) P20EB-1C(c) P20EB-2C(d) P28AA-17C PAGE K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-308 K-308 K-308 K-308 K-308 K-308 K-308 K-308 K-308 K-308 K-308 K-308 K-308 K-308 K-308 K-308 K-304 K-304 K-304 K-305 K-302 K-304 K-304 K-302 K-302 K-304 K-304 K-302 K-296 K-297 K-297 K-297 K-298 K-298 K-298 K-298 K-298 K-298 K-292 K-292 K-292 K-292 K-300 PART NO. P28AA-18C P28AA-1C P28AA-2C P28DA-1C P28GA-2C P28NA-1C P28NA-5C P32AC-1 P32AC-2 P32AF-1 P32AF-2 P-34627 P352PN-3C P35AG-9200R P36532 P36533 P36534 P36535 P36536 P36537 P399AAA-1-200C P399AAA-1-200C P399AAA-1C P399AAA-1C P399AAA-1C P399AAC-1-200C P399AAC-1-200C P399AAC-1C P399AAC-1C P399AAC-1C P399BAA-1-200C P399BAA-1-200C P399BAA-1C P399BAA-1C P399BAA-1C P399BAC-1-200C P399BAC-1-200C P399BAC-1C P399BAC-1C P399BAC-1C P399CAA-1-200C P399CAA-1-200C P399CAA-1C P399CAA-1C P399CAA-1C P399CAC-1-200C P399CAC-1-200C P399CAC-1C P399CAC-1C P399CAC-1C P399GAA-1C1 P400AD-1C P400AD-1C P400AD-2C P400BD-1C P45NCA-12C(b) P45NCA-82C(f) P470EB-1C P470FB-1C P47AA-13C K-1P PAGE K-300 K-300 K-300 K-300 K-300 K-300 K-300 K-301 K-301 K-301 K-301 K-340 K-319 K-319 K-338 K-338 K-338 K-338 K-338 K-338 K-309 K-319 K-309 K-299 K-320 K-309 K-319 K-309 K-299 K-320 K-309 K-319 K-309 K-299 K-320 K-309 K-319 K-309 K-299 K-320 K-309 K-319 K-309 K-299 K-320 K-309 K-320 K-309 K-299 K-320 K-309 K-306 K-307 K-306 K-306 K-302 K-302 K-299 K-299 K-293 PART NO. P47AA-1C P47AA-4C P47BA-1C P47BA-6C P47GA-9C (a) P502-032MF P502-8032 P502-8032 P502-8032FM P502-8032FM P502-8032MF P502-8032S P502-8032S P502-8033S P502-8033S P502-8052 P502-8052 P502-8052S P502-8052S P502-8053 P502-8053 P502-8053MF P502-8053MF P502-8053S P502-8053S P502-8082 P502-8082 P502-8082S P502-8082S P502-8083 P502-8083 P502-8083S P502-8083S P502-8084 P502-8084 P502-8084S P502-8084S P502-8162 P502-8162 P502-8162S P502-8162S P502-8163 P502-8163 P502-8163S P502-8163S P502-8164 P502-8164 P502-8164S P502-8164S P502-8165 P502-8165 P502-8165S P502-8165S P502-8167S P502-8167S P502-8303 P502-8303 P502-8303S P502-8303S P502-8304 PAGE K-293 K-293 K-293 K-293 K-293 K-472 K-471 K-472 K-471 K-472 K-471 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 PART NO. P502-8304 P502-8304S P502-8304S P502-8305 P502-8305 P502-8305S P502-8305S P502-8306S P502-8306S P502-8307S P502-8307S P502-8309S P502-8309S P502-8413 P502-8413 P502-8414 P502-8414 P502-8414S P502-8414S P502-8415 P502-8415 P502-8415S P502-8415S P502-8417S P502-8417S P502-8419S P502-8419S P502-8757S P502-8757S P502-8759S P502-8759S P502-C032 P502-C032S P502-C033 P502-C033S P502-C052 P502-C052S P502-C053 P502-C053S P502-C082 P502-C082S P502-C083 P502-C083S P502-C084 P502-C084S P502-C162 P502-C162S P502-C163 P502-C163S P502-C164 P502-C164S P502-C165 P502-C165S P502-C167S P502-C303 P502-C303S P502-C304 P502-C304S P502-C305 P502-C305S PAGE K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-471 K-472 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 19 K-1Q PAGE K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-318 K-295 K-295 K-295 K-295 K-296 K-297 K-296 K-297 K-297 K-297 K-297 K-297 K-297 K-298 K-298 K-298 K-298 K-298 K-298 K-298 K-298 K-296 K-297 K-297 K-298 K-298 K-298 K-298 K-383 K-383 K-283 K-284 K-384 K-68 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 Motors PART NO. P66AAB-13C P66AAB-14C P66AAB-15C P66AAB-19C P66AAB-1C P66AAB-25C P66AAB-26C P66AAB-3C P66AAB-4C P66AAB-6C P66AAB-7C P66AAB-9C P66ABB-21C P66ABB-24C P66BAB-1C P66BAB-3C P66BAB-4C P66BAB-5C P67AA-1C P67CA-1C P67EA-5C P67FA-5C P70AA-118C P70AA-119C P70AA-2C P70CA-2(a) P70CA-3(a) P70CA-5C(a) P70DA-1C(a) P70DA-2C(a) P70KA-1C P70LA-2 P70LB-1 P70LB-6 P70MA-1 P70MA-18 P70MA-2 P70NA-1 P70SA-1 P72AA-27C P72CA-2(a) P72DA-1(a) P72LA-1 P72LB-1 P72MA-1 P72NA-1 PF 052 PF 052MF PLT344-1R PLT344-1R PRD-3 PTC R10 E22 R10 E22M R10 E23 R10 E23M R10 E32 R10 E32M R10 E33 R10 E33M Electrical PAGE K-492 K-492 K-493 K-493 K-492 K-492 K-492 K-492 K-492 K-492 K-492 K-493 K-493 K-492 K-492 K-492 K-495 K-495 K-495 K-495 K-495 K-495 K-495 K-495 K-495 K-495 K-483 K-483 K-483 K-483 K-483 K-483 K-483 K-474 K-474 K-474 K-474 K-474 K-474 K-474 K-474 K-474 K-474 K-474 K-474 K-474 K-474 K-474 K-474 K-306 K-306 K-307 K-306 K-294 K-294 K-294 K-294 K-318 K-318 K-318 Heating Components PART NO. P506-804F P506-804F P506-804F P506-804FD P506-804FD P506-804FD P506-804FD P506-804FD P506-805F P506-805F P506-805F P506-805F P506-805FD P506-805FD P506-805FD P506-805FD P506-8D48 P506-8F48 P506-8H100 P506-8H42 P506-8H48 P506-8RD48 P506-8RH48 P506-8RW48 P506-8W100 P506-8W48 P507-8284S P507-8355 P507-8355S P507-8456S P507-8457S P507-8509S P507-8711S P508-8082 P508-8083 P508-8162 P508-8163 P508-8163S P508-8164 P508-8164S P508-8165 P508-8165S P508-8303 P508-8304 P508-8304S P508-8305 P508-8305S P508-8415 P508-8417S P545NCB-22C1 P545NCB-25C1 P545NCB-82C P545NCB-82C1 P61AA-35C P61AA-6C P61NA-2C P61NA-4C P66AAB-10C P66AAB-11C P66AAB-12C Indoor Air Quality PAGE K-491 K-492 K-492 K-493 K-491 K-492 K-492 K-493 K-491 K-492 K-492 K-493 K-491 K-492 K-492 K-493 K-491 K-492 K-492 K-493 K-488 K-488 K-488 K-488 K-488 K-488 K-488 K-488 K-489 K-489 K-489 K-489 K-488 K-488 K-488 K-488 K-488 K-488 K-488 K-488 K-488 K-488 K-492 K-492 K-493 K-492 K-492 K-493 K-492 K-492 K-492 K-492 K-493 K-493 K-492 K-492 K-492 K-492 K-492 K-492 Thermostats PART NO. P505-80417 P505-80417 P505-80417 P505-80417 P505-80421 P505-80421 P505-80421 P505-80421 P505-80517 P505-80517 P505-80517 P505-80517 P505-80521 P505-80521 P505-80521 P505-80521 P505-80525 P505-80525 P505-80525 P505-80525 P505-814411 P505-814413 P505-814417 P505-81449 P505-819211 P505-819213 P505-819217 P505-81929 P505-830013 P505-830017 P505-840017 P505-840021 P505-84811 P505-84813 P505-84817 P505-8485 P505-8487 P505-8489 P505-89611 P505-89613 P505-8967 P505-8969 P506-802F P506-802F P506-802F P506-802FD P506-802FD P506-802FD P506-803F P506-803F P506-803F P506-803F P506-803F P506-803FD P506-803FD P506-803FD P506-803FD P506-803FD P506-804F P506-804F Oils & Chemicals PAGE K-476 K-476 K-476 K-476 K-476 K-476 K-476 K-485 K-485 K-485 K-485 K-485 K-485 K-485 K-485 K-485 K-485 K-485 K-485 K-487 K-487 K-487 K-487 K-487 K-487 K-487 K-487 K-487 K-487 K-487 K-488 K-492 K-491 K-493 K-492 K-492 K-491 K-492 K-492 K-493 K-491 K-492 K-492 K-493 K-491 K-492 K-492 K-493 K-491 K-492 K-492 K-493 K-491 K-492 K-492 K-493 K-491 K-492 K-492 K-493 Accessories, Supplies & Commodities PART NO. P503-C305 P503-C305S P503-C306S P503-C307S P503-C309S P503-C417S P503-C419S P504-8083 P504-8083S P504-8084 P504-8084S P504-8085 P504-8085S P504-8163 P504-8163S P504-8164 P504-8164S P504-8165 P504-8165S P504-H083 P504-H083S P504-H084 P504-H085 P504-H085S P504-H163 P504-H163S P504-H164 P504-H164S P504-H165 P504-H165S P505-4821 P505-8025 P505-8027 P505-8027 P505-8027 P505-8027 P505-80311 P505-80311 P505-80311 P505-80311 P505-80313 P505-80313 P505-80313 P505-80313 P505-80317 P505-80317 P505-80317 P505-80317 P505-8039 P505-8039 P505-8039 P505-8039 P505-80411 P505-80411 P505-80411 P505-80411 P505-80413 P505-80413 P505-80413 P505-80413 Tools & Instruments PAGE K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-473 K-481 K-481 K-481 K-481 K-481 K-481 K-481 K-479 K-479 K-479 K-481 K-481 K-478 K-477 K-478 K-477 K-478 K-479 K-479 K-479 K-477 K-478 K-477 K-478 K-477 K-478 K-477 K-478 K-477 K-478 K-481 K-481 K-477 K-478 K-477 K-478 K-476 K-476 K-476 K-476 K-476 K-476 K-476 K-476 K-476 K-476 K-476 K-476 Refrigeration PART NO. P502-C306S P502-C307S P502-C309S P502-C413 P502-C414 P502-C414S P502-C415 P502-C415S P502-C417S P502-C419S P502-C757S P502-C759S P503-8133FSFD P503-8133SSFD P503-8134SSFD P503-8135FSFD P503-8135SSFD P503-8136SSFD P503-8137SSFD P503-8165SVB P503-8166SVB P503-8167SVB P503-8277SSFD P503-8279SSFD P503-8283 P503-8283S P503-8283S P503-8284S P503-8284S P503-8306SVB P503-8307SVB P503-8309SVB P503-8355 P503-8355 P503-8355S P503-8355S P503-8456S P503-8456S P503-8457S P503-8457S P503-8509S P503-8509S P503-85411SSFD P503-85413SSFD P503-87511S P503-87511S P503-87513S P503-87513S P503-C083 P503-C083S P503-C084 P503-C084S P503-C085 P503-C085S P503-C164 P503-C164S P503-C165 P503-C165S P503-C166S P503-C167S Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 20 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index PART NO. R15 E22 R15 E22 R15 E23 R15 E23 R15 E32 R15 E32 R15 E33 R15 E33 R20 E42 R20 E42M R20 E43 R20 E43M R20 E62 R20 E62M R20 E63 R20 E63M R20 E83 R20 E83M R20 E84 R20 E84M R25 E42 R25 E42 R25 E43 R25 E43 R25 E62 R25 E62 R25 E63 R25 E63 R25 E83 R25 E83 R25 E84 R25 E84 R30 E103 R30 E103M R30 E104 R30 E104M R30 E105 R30 E105M R30 E124 R30 E124M R30 E125 R30 E125M R30 E154 R30 E154M R30 E155 R30 E155M R30 E157 R30 E157M R310AD-1C R310AE-2C R35 E103 R35 E103 R35 E104 R35 E104 R35 E105 R35 E105 R35 E124 R35 E124 R35 E125 R35 E125 R35 E154 PAGE K-424 K-425 K-424 K-425 K-424 K-425 K-424 K-425 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-424 K-425 K-424 K-425 K-424 K-425 K-424 K-425 K-424 K-425 K-424 K-425 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-310 K-310 K-424 K-425 K-424 K-425 K-424 K-425 K-424 K-425 K-424 K-425 K-424 PART NO. R35 E154 R35 E155 R35 E155 R35 E157 R35 E157 R40 E185 R40 E185M R40 E187 R40 E187M R40 E189 R40 E189M R40 E2811 R40 E2811M R40 E287 R40 E287M R40 E289 R40 E289M R45 E185 R45 E185 R45 E187 R45 E187 R45 E189 R45 E189 R45 E2811 R45 E2811 R45 E287 R45 E287 R45 E289 R45 E289 R50 E3211 R50 E3211M R50 E329 R50 E329M R50 E4013 R50 E4013M R50 E4017 R50 E4017M R50 E4021 R50 E4021M R55 E3211 R55 E3211 R55 E329 R55 E329 R55 E4013 R55 E4013 R55 E4017 R55 E4017 R55 E4021 R55 E4021 RAN-1290132-A18 RAN-1290132-A24 RAN-1290132-A36 RAN-1290132-A48 RAN-1290132-B18 RAN-1290132-B24 RAN-1290132-B36 RAN-1290132-B48 RAN-A12-1506 RAN-A12-1560 RAN-A12-700 RAN-A12-701 PAGE K-425 K-424 K-425 K-424 K-425 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-424 K-425 K-424 K-425 K-424 K-425 K-424 K-425 K-424 K-425 K-424 K-425 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-422 K-423 K-424 K-425 K-424 K-425 K-424 K-425 K-424 K-425 K-424 K-425 K-428 K-428 K-428 K-428 K-428 K-428 K-428 K-428 K-433 K-433 K-433 K-433 PART NO. RAN-A12-710 RAN-A12-711 RAN-A12-712 RAN-A22-1112 RAN-A22-1129 RAN-A22-2451 RAN-A22-2453 RAN-A22-391 RAN-A22-392 RAN-A30 x 450 RAN-A30 x 451 RAN-A30 x 452 RAN-A30 x 453 RAN-A30-1769 RAN-A30-180 RAN-A30-181 RAN-A30-1819 RAN-A30-182 RAN-A30-183 RAN-A30-184 RAN-A30-185 RAN-A30-1977 RAN-A30-2209 RAN-A30-2210 RAN-A30-2211 RAN-A30-2212 RAN-A30-2282 RAN-A30-2311 RAN-A30-260 RAN-A30-261 RAN-A30-262 RAN-A30-263 RAN-A30-301 RAN-A30-304 RAN-A30-307 RAN-A30-308 RAN-A30-310 RAN-A30-311 RAN-A30-313 RAN-A30-314 RAN-A30-323 RAN-A30-3618 RAN-A30-3620 RAN-A30-3723 RAN-A30-3725 RAN-A30-3734 RAN-A30-3737 RAN-A30-3755 RAN-A30-3769 RAN-A30-3815 RAN-A30-3842 RAN-A30-542 RAN-A30-543 RAN-A30-544 RAN-A30-X-204 RAN-ETC-111000 RAN-ETC-111100 RAN-ETC-112000 RAN-ETC-112100 RAN-ETC-141000 RAN-ETC-211000 K-1R PAGE K-433 K-433 K-433 K-432 K-435 K-434 K-434 K-432 K-432 K-434 K-434 K-434 K-434 K-433 K-432 K-432 K-433 K-432 K-432 K-432 K-432 K-433 K-433 K-433 K-433 K-433 K-433 K-434 K-432 K-432 K-432 K-432 K-432 K-432 K-432 K-432 K-432 K-432 K-432 K-432 K-433 K-433 K-433 K-433 K-433 K-433 K-433 K-433 K-433 K-435 K-435 K-433 K-433 K-433 K-434 K-439 K-439 K-439 K-439 K-439 K-439 PART NO. RAN-ETC-211100 RAN-ETC-212000 RAN-ETC-212100 RAN-ETC-241000 RAN-F25-107 RAN-F25-114 RAN-G20-4050 RAN-G20-4051 RAN-G20-4412 RAN-G23-5052 RAN-G23-5253 RAN-K-3001 RAN-K-3002 RAN-O10-1000 RAN-O10-1010 RAN-O10-1072 RAN-O10-1401 RAN-O10-1401H RAN-O10-1402 RAN-O10-1408 RAN-O10-1409 RAN-O10-1410 RAN-O10-1416 RAN-O10-1418 RAN-O10-1419 RAN-O10-1433 RAN-O10-1473 RAN-O10-1483 RAN-O10-1490 RAN-O10-1491 RAN-O10-1802 RAN-O10-1807 RAN-O10-1831 RAN-O10-1831H RAN-O10-1842 RAN-O10-1894 RAN-O10-1894H RAN-O10-2000 RAN-O10-2054 RAN-O11-1711 RAN-O11-1713 RAN-O11-1799 RAN-O11-3099 RAN-O11-3173 RAN-O12-1439 RAN-O12-1502 RAN-O12-1505 RAN-O12-1506 RAN-O12-1549 RAN-O12-1550 RAN-O12-1594 RAN-O12-4120 RAN-O12-4147 RAN-O12-4833 RAN-O12-4834 RAN-O12-4840 RAN-O12-4842 RAN-O12-4846 RAN-O16-104 RAN-O16-107 RAN-O16-111 PAGE K-439 K-439 K-439 K-439 K-434 K-434 K-429 K-429 K-429 K-429 K-429 K-440 K-440 K-430 K-431 K-430 K-435 K-435 K-435 K-430 K-431 K-431 K-431 K-431 K-430 K-430 K-431 K-435 K-431 K-431 K-431 K-438 K-435 K-435 K-435 K-438 K-438 K-438 K-438 K-438 K-438 K-436 K-436 K-436 K-437 K-437 K-437 K-437 K-437 K-437 K-437 K-437 K-437 K-437 K-437 K-437 K-437 K-437 K-431 K-436 K-431 PART NO. RAN-O16-120 RAN-O16-142 RAN-O16-166 RAN-O16-200 RAN-O16-209 RAN-O16-261 RAN-O16-263 RAN-O16-264 RAN-O16-503 RAN-O16-527 RAN-O16-557 RAN-O16-570 RAN-O16-585 RAN-O16-588 RAN-O16-601 RAN-O16-624 RAN-O18-100 RAN-O20-7002 RAN-O20-7006 RAN-O20-7041 RAN-O22-7702 RAN-O22-7706 RAN-O60-100 RAN-O60-101 RAN-O60-109 RAN-O60-200 RAN-P30-3601 RAN-P30-3701 RAN-P30-3801 RAN-P30-3803H RAN-P30-5628H RAN-P30-5629 RAN-P30-5826 RAN-P30-5827 RAN-P30-5827H RAN-P32-1201 RC-10098 RC-10098-HH RC35 RCVE-2-GA3/8X1/2ODF RCVE-3-GA3/8X1/2ODF RCVE-4-GA1/2X1/2ODF RCVE-4-GA1/2X5/8ODF RCVE-5-GA1/2X1/2ODF RCVE-5-GA1/2X5/8ODF RCVE-6-GA1/2X1/2ODF RCVE-6-GA1/2X5/8ODF RCZE-2-GA3/8X1/2ODF RCZE-2-GA3/8X1/2ODF RCZE-3-GA3/8X1/2ODF RCZE-3-GA3/8X1/2ODF RCZE-3-N3/8X1/2ODF RCZE-4-GA1/2X1/2ODF RCZE-4-GA1/2X1/2ODF RCZE-5-GA1/2X5/8ODF RCZE-5-GA4X5ODF RCZE-6-GA1/2X5/8ODF RK1001 RK12K RK1501 RK1B2 PAGE K-436 K-438 K-436 K-438 K-438 K-436 K-431 K-431 K-438 K-436 K-436 K-438 K-436 K-431 K-431 K-436 K-435 K-436 K-438 K-431 K-437 K-437 K-431 K-431 K-431 K-431 K-428 K-428 K-428 K-428 K-428 K-428 K-428 K-428 K-428 K-429 K-452 K-452 K-470 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-423 K-425 K-423 K-425 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 21 K-1S SVE10CP1005/8X7/8ODF SVE-10-GA5/8X7/8ODF SVE15CP1007/8X11/8OD SVE-15-GA7/8X1-1/8ODF SVE2-CP1001/2X5/8OD SVE-2-GA1/2/5/8ODF SVE3-CP1001/2X5/8OD SVE-3-GA1/2X5/8ODF SVE4-CP1001/2X7/8OD SVE-4-GA1/2X7/8ODF SVE5-CP1001/2X7/8OD SVE-5-GA1/2X7/8ODF SVE8CP1005/8X7/8ODF SVE-8-GA5/8X7/8ODF T240 T25/16 T35/16-CS T-800-1605 T-800-1606 T-800-1618 T-800-1620 T-800-1624 TA-1 TE-6300-608 TE-6300-610 TO10314P01 TO10314P01 TO10317P01 TO10317P01 UCGC0017RW UCGC0017RW UCGC0017RW UCGC0020RW UCGC0020RW UCGC0020RW UCGC0025RW UCGC0025RW UCGC0025RW UCGC0033RW UCGC0050RW UCGC0050RW UCGC0050RW UCGC0055RW UCGC0075RW UCGC0100RW PAGE K-175 K-175 K-175 K-175 K-175 K-175 K-175 K-175 K-175 K-175 K-175 K-175 K-175 K-175 K-175 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-446 K-242 K-242 K-242 K-289 K-289 K-289 K-289 K-289 K-456 K-283 K-283 K-50 K-51 K-50 K-51 K-46 K-45 K-45 K-45 K-46 K-45 K-46 K-45 K-45 K-46 K-45 K-46 K-45 K-46 K-46 K-46 Motors PART NO. STAS 485T STAS 487T STAS 489T STAS 9611T STAS 9613T STAS 967T STAS 969T STAS14411T STAS14413T STAS14417T STAS1449T STAS19211T STAS19213T STAS19217T STAS-9625S-V Electrical PAGE K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-455 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-243 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-459 K-288 K-288 K-283 K-383 K-383 K-383 K-175 Heating Components PART NO. SF-114 SF-114-F SF-114-F SF-115 SF-115 SF-115-F SF-115-F SF-283-F SF-283-F SF-285-T SF-285-T SF-286-T SF-286-T SF-287-T SF-287-T SF-289-T SF-289-T SF-4811-T SF-4811-T SF-4813-T SF-4813-T SF-489-T SF-489-T SF-6417-T SF-6417-T SF-6421-T SF-6421-T SG-1004 SG-1006 SG-1008 SG-1010 SG-1012 SG-1016 SG-1104 SG-1106 SG-1108 SG-1110 SG-1112 SG-1116 SG-1204 SG-1206 SG-1208 SG-1210 SG-1212 SG-1216 SHGB-15-0/7511ODF SHGB-15-0/759ODF SHGB-8-0/1009ODF SHGB-8-0/107ODF SHGBE-15-0/7511 ODF SHGBE-15-0/759ODF SHGBE-8-0/1007ODF SHGBE-8-0/1009ODF SHL10A-600R SHL10A-603R SHL10A-603R SPD-162 SPD-162MF SPD-163 STAS 4811T Indoor Air Quality PAGE K-251 K-250 K-256 K-256 K-256 K-256 K-256 K-253 K-253 K-253 K-250 K-250 K-250 K-250 K-250 K-250 K-251 K-246 K-246 K-246 K-246 K-246 K-246 K-246 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-457 K-311 K-311 K-311 K-311 K-311 K-311 K-311 K-311 K-455 Thermostats PART NO. S-9090 S-9101 S-9104 S-9104H S-9105 S-9106H S-9106V S-9108 S-9108U S-9109 S-9111 S-9112 S-9112J S-9113J S-9114J S-9115J S-9130 S-9450 S-9451 S-9452 S-9453 S-9454 S-9455 S-9456 SA-12 SA-12FM SA-12S SA-13 SA-13FM SA-13S SA-13SU SA-13U SA-13UU SA-13UU SA-14 SA-14FM SA-14S SA-14SU SA-14U SA-14UU SA-14UU SA-15 SA-15S SA-15SU SA-15U SA-15UU SA-17S SA-19S SA-211 SA-213 SA-217 SEC99AA-24C SEC99AA-36C SEC99AA-48C SEC99AA-60C SEC99AB-24C SEC99AB-36C SEC99AB-48C SEC99AB-60C SF-114 Oils & Chemicals PAGE K-247 K-247 K-247 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-248 K-244 K-244 K-244 K-244 K-244 K-244 K-244 K-244 K-244 K-244 K-244 K-244 K-244 K-244 K-244 K-243 K-243 K-243 K-243 K-243 K-245 K-245 K-245 K-245 K-245 K-245 K-245 K-245 K-245 K-245 K-245 K-245 K-245 K-245 K-245 K-245 K-245 K-251 Accessories, Supplies & Commodities PART NO. S-5290 S-5292 S-5294 S-5580 S-5581 S-5582 S-5585 S-5587 S-5588 S-5590 S-5687 S-5688 S-5690 S-5692 S-5694 S-5792 S-5794 S-5882 S-5885 S-5887 S-5888 S-5890 S-6304 S-6305 S-6307 S-6311 S-6405 S-6407 S-6411 S-6413 S-6415 S-6621 S-6625 S-6631 S-7615 S-7621 S-7625 S-7721 S-7725 S-7731 S-7741 S-7742 S-8060 S-8061 S-8062 S-8063 S-8064 S-8065 S-8066 S-8067 S-8068 S-8600 S-8600 S-8610 S-8610 S-8620 S-8620 S-8630 S-8630 S-9010 Tools & Instruments PAGE K-425 K-425 K-425 K-425 K-423 K-423 K-423 K-425 K-423 K-425 K-425 K-425 K-425 K-425 K-423 K-423 K-423 K-423 K-312 K-312 K-312 K-312 K-312 K-312 K-313 K-312 K-313 K-313 K-312 K-313 K-312 K-313 K-312 K-456 K-456 K-456 K-456 K-456 K-456 K-456 K-456 K-456 K-248 K-248 K-248 K-248 K-258 K-258 K-247 K-247 K-247 K-247 K-247 K-247 K-247 K-247 K-247 K-247 K-247 K-247 Refrigeration PART NO. RK1C1 RK1C2 RK1P3 RK1Q3 RK2001 RK2501 RK3001 RK32K RK3501 RK3B2 RK3C1 RK3C2 RK3P3 RK3Q3 RK4001 RK4501 RK5001 RK5501 RLD-H10-100 RLD-H10-101 RLD-H10-102 RLD-H10-103 RLD-H10-104 RLD-H10-105 RLD-H10-600R RLD-H10-601R RLD-H10-602R RLD-H10-603R RLD-H10-604R RLD-H10-606R RLD-H10-607R RLD-H10G-1 RLD-H10PM-1 RSF-4811-T RSF-4813-T RSF-4817-T RSF-4821-T RSF-487-T RSF-489-T RSF-9617-T RSF-9621-T RSF-9625-T S-1901 S-1902 S-1903 S-1904 S-4004 S-4005 S-5180 S-5181 S-5182 S-5185 S-5187 S-5188 S-5190 S-5192 S-5194 S-5202 S-5203 S-5204 Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 22 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Table of Contents/Part Number Index PART NO. UCHC0020RW UCHC0020RW UCHC0020RW UCHC0025RW UCHC0025RW UCHC0025RW UCHC0033RW UCHC0033RW UCHC0033RW UCHC0050RW UCHC0050RW UCHC0050RW UCHC0060RW UCHC0075RW UCHC0100RW UCZC0150UW UGZC0200UW V146AL-1C V148AL-1C V43AS-1C V43AS-2C V43AT-1C V43AT-2C V43AV-1C V43AV-2C V43AV-5C V43AW-2C V43BS-3C V43BS-6C V43BS-7C V43BT-3C V43BT-6C V43BT-7C V43BV-10C V43BV-4C V43BV-7C V43BW-2C V43BW-7C V43CS-1C V43CS-2C V43CT-2C V43CV-1C V43CV-2C V46AA-1C V46AB-1C V46AC-1C V46AC-8C V46AD-1C V46AD-4C V46AE-1C V46AE-4C V46AJ-2C V46AL-2C V46AM-2C V46AR-1C V46AR-2C V46AS-1C V46AS-2C V46AS-3C V46AT-1C PAGE K-47 K-48 K-48 K-47 K-48 K-48 K-47 K-48 K-48 K-47 K-48 K-48 K-47 K-47 K-47 K-47 K-47 K-331 K-332 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-321 K-325 K-325 K-325 K-326 K-325 K-326 K-325 K-326 K-325 K-325 K-325 K-325 K-326 K-325 K-325 K-326 K-325 PART NO. V46AT-2C V46AT-3C V46BA-2C V46BB-2C V46BC-2C V46BD-2C V46BR-2C V46BS-3C V46BS-4C V46BT-3C V46BT-4C V46CJ-2C V46CN-2C V46CP-2C V46CQ-2C V46CR-2C V46CS-3C V46CS-4C V46CT-3C V46CT-4C V46DA-2C V46EK-2C V46NA-1C V46NB-1C V46NB-2C V46NC-1C V46NC-2C V46ND-1C V46ND-2C V46NE-1C V46NE-2C V46VE-2C V47AA-1C V47AA-2C V47AA-3C V47AB-2C V47AB-3C V47AB-4C V47AB-5C V47AC-3C V47AC4C V47AC-6C V47AC-8C V47AD-1C V47AD-2C V47AD-3C V47AE-1C V47AE-2C V47AE-3C V47AR-1C V47AR-2C V47AR-3C V47AS-1C V47AS-2C V47AS-3C V47AT-1C V47AT-2C V47AT-3C V47NA-2 V47NA-2C PAGE K-325 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-326 K-325 K-325 K-327 K-327 K-327 K-327 K-327 K-327 K-327 K-327 K-327 K-326 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-328 K-329 K-329 PART NO. V47NA-8 V47NA-8C V47NB-1 V47NB-1C V47NC-1 V47NC-1C V47NR-1 V47NR-1C V48AB-1C V48AB-2C V48AC-1C V48AC-2C V48AD-1C V48AD-2C V48AE-1C V48AE-2C V48AF-1C V48AF-2C V48AJ-2C V48AL-2C V48AM-2C V48EK-2C VFD66-CVR-1C PAGE K-329 K-329 K-329 K-329 K-329 K-329 K-329 K-329 K-330 K-330 K-330 K-330 K-330 K-330 K-330 K-330 K-330 K-330 K-330 K-330 K-330 K-330 K-319 VVE100CP10013/8X13/8 K-446 VVE-100-GA13/8X13/8 K-446 VVE52CP10013/8X13/8 K-446 VVE-52-GA13/8X138OD K-446 VVE70CP10013/8X13/8O K-446 VVE-70-GA13/8X13/8OD K-446 WEL11A-601R K-288 WEL11A-601R K-289 WEL14A-600R (a) K-289 WEL14A-601R (a) K-289 WEL14A-602R (a) K-289 WEL14A-603R (a) K-289 WEL16A-600R K-289 WEL16A-601R K-289 WEL17A-600R(b) K-289 WEL17A-601R(b) K-289 WEL17A-602R(b) K-289 WEL17A-603R(b) K-289 WEL17A-604R(b) K-289 WEL17A-606R(b) K-289 WEL18A-600R(b) K-289 WEL18A-601R (b) K-289 WEL18A-602R(b) K-289 WHA-P399-200C K-309 WHA-P399-200C K-299 WHA-P399-200C K-320 WHA-P399-400C K-309 WHA-P399-400C K-299 WHA-P399-400C K-320 WHA-P399-600C K-309 WHA-P399-600C K-320 WHA-P400-100C K-306 WHA-P400-100C K-307 WHA-P400-125C K-306 WHA-P400-125C K-307 WHA-P400-250C K-306 WHA-P400-250C K-307 K-1T PART NO. WHA-P400-400C WHA-P400-430C WRENCH PAGE K-307 K-306 K-16 WVE135CP10015/8X21/8 K-446 WVE-135-GA15/8X21/8 K-446 WZ-1000-2 K-289 WZ-1000-4 K-289 WZ-1000-5 K-289 X11562-2 K-490 X11983-1 K-490 X11983-2 K-490 X12176-3 K-490 X25787-7 K-490 X27458-1 K-490 X27458-2 K-490 X27458-3 K-490 X27458-4 K-490 X2772 K-358 X28747-1 K-490 X3495 K-358 X3596 K-358 X4296 K-358 X4299 K-358 X8348 K-358 X9242 K-358 X9246 K-358 X9249 K-358 X9250 K-358 Y63F22-0 K-334 Y63T22-0 K-334 Y63T31-0 K-334 Y64T15-0 K-334 Y64T21-0 K-334 Y64T22-0 K-334 Y65A13-0 K-334 Y65A21-0 K-334 Y65F13-0 K-334 Y65F42-0 K-334 Y65G13-0 K-334 Y65S13-0 K-334 Y65T31-0 K-334 Y65T42-0 K-334 Y65T54-0 K-334 Y66F12-0 K-334 Y66F13-0 K-334 Y66T12-0 K-334 Y66T13-0 K-334 Y69T15-0 K-334 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 23 Refrigeration K-2 Motors Electrical Heating Components Indoor Air Quality Thermostats Oils & Chemicals MODEL NO. 26CT351 Cuber with 26CB400 Bin • Produces high-quality ice that is free from impurities and uniformly shaped • Engineered to provide maximum ice making capacity, greater water efficiency and reliable operation • Use of R-404A refrigerant for improved efficiency • Choose from 3 different cube sizes • Serviceability is from the front easy Access to controls • Carrier quality and reliability backed by our 3 year parts and labor limited warranty on the entire machine and 5 years on the compressor and evaporator parts Accessories, Supplies & Commodities DESCRIPTION Self-Contained Air Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp.Water Cooled Cuber 3/4 Hp.Water Cooled Cuber 3/4 Hp.Water Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp.Water Cooled Cuber 3/4 Hp.Water Cooled Cuber 3/4 Hp.Water Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp. Water Cooled Cuber 3/4 Hp. Water Cooled Cuber 3/4 Hp. Water Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp.Water Cooled Cuber 3/4 Hp.Water Cooled Cuber 3/4 Hp.Water Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp. Air Cooled Cuber 3/4 Hp Water Cooled Cuber 3/4 Hp Water Cooled Cuber 3/4 Hp Water Cooled Cuber 3/4 Hp Air Cooled Cuber 3/4 Hp Air Cooled Cuber 3/4 Hp Air Cooled Cuber 3/4 Hp Water Cooled Cuber 3/4 Hp Water Cooled Cuber 3/4 Hp Water Cooled Cuber 1 1/2 Hp. Air Cooled Cuber 1 1/2 Hp. Air Cooled Cuber 1 1/2 Hp. Air Cooled Cuber 1 1/2 Water Cooled Cuber 1 1/2 Water Cooled Cuber 1 1/2 Water Cooled Cuber 1 1/2 Remote Cooled Cuber 1 1/2 Remote Cooled Cuber 3 Hp. Air Cooled Cuber 3 Hp Water Cooled Cuber 3 Hp Water Cooled Cuber 1 1/2 Remote Cooled Cuber 3 Hp. Air Cooled Cuber 3 Hp. Air Cooled Cuber 3 Hp Water Cooled Cuber 3 Hp Remote Cooled Cuber 3 Hp Remote Cooled Cuber 3 Hp Remote Cooled Cuber 3 Hp Water Cooled Cuber 3 Hp Water Cooled Cuber 3 Hp Water Cooled Cuber 3 Hp Remote Cooled Cuber 3 Hp Remote Cooled Cuber 3 Hp Remote Cooled Cuber Kube Dispenser Tools & Instruments VOLTAGE 115-60-1 115-60-1 115-60-1 115-60-1 115-60-1 115-60-1 115-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 115-60-1 115-60-1 115-60-1 115-60-1 115-60-1 115-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 115-60-1 115-60-1 115-60-1 115-60-1 115-60-1 115-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-3 208/230-60-3 208/230-60-3 208/230-60-3 208/230-60-3 208/230-60-3 115-60-1 Refrigeration MODEL NUMBER 26CK101A50 26CT351AK 26CT351AHK 26CT351AC 26CT351WK 26CT351WHK 26CT351WC 26CT354AK 26CT354AHK 26CT354AC 26CT354WK 26CT354WHK 26CT354WC 26CT551AK 26CT551AHK 26CT551AC 26CT551WK 26CT551WHK 26CT551WC 26CT554AK 26CT554AHK 26CT554AC 26CT554WK 26CT554WHK 264CT554WC 26CB451AK 26CB451AHK 26CB451AC 26CB451WK 26CB451WHK 26CB451WC 26CB454AK 26CB454AHK 26CB454AC 26CB454WK 26CB454WHK 26CB454WC 26CB654AK 26CB654AHK 26CB654AC 26CB654WK 26CB654WHK 26CB654WC 26CB654RK 26CB654RHK 26CB654RC 26CB1254AK 26CB1254AHK 26CB1254AC 26CB1254WK 26CB1254WHK 26CB1254WC 26CB1254RK 26CB1254RHK 26CB1254RC 26CB1255WK 26CB1255WHK 26CB1255WC 26CB1255RK 26CB1255RHK 26CB1255RC 26CAKD-125 Compressors, Chillers, Condensers CARRIER ICE MAKING EQUIPMENT a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 24 CARRIER ICE MAKING EQUIPMENT Model Number Significance 26 CB 4 5 1 Electrical Indoor Air Quality Heating Components Electrical Characteristics 1 = 115 Volt-60 Hz.-1 Ph. (2-wire plus Ground) 4 = 208/230 Volt-60 Hz.-1 Ph. (2-wire plus Ground) 5 = 208/230 Volt-60 Hz.-3 Ph. (3-wire plus Ground) 7 = 220/240 Volt-50 Hz.-1 Ph. (2-wire plus Ground) Thermostats Modification Code 1 = R-502, Copeland Compressor except CB1224/CB1225 (Bristol) 2 = R-502, Bristol Compressor 3 = R-404a, Bristol Inertia Compressor/Polyolester Lubricant except CT341/CT344 (Bristol Reed Valve Compressor w/POE Lubricant) 5 = R-404a, Tecumseh Compressor w/POE Lubricant Cuber Series 3 = 300 Series 4 = 400 Series 5 = 500 Series 6 = 600 Series 12 = 1200 Series Oils & Chemicals Accessories, Supplies & Commodities HK Condenser Type A = Air Cooled Condenser-Self Contained W = Liquid Cooled Condenser-Self Contained R = For Remote Air Cooled Condenser Cabinet Width CB = Horizontal Unit (42" wide) CT3XX = Slimline Unit (28-1/2" wide) CT5XX = Slimline Unit (30" wide) Carrier Ice Maker Series Tools & Instruments Refrigeration W Cube Size C = Full Cube (1-1/4" 1-1/4" x 1-1/4") HK = Half Cube (1-1/4" x 1/1/4" x 5/8") K = Cubelet (5/8" x 5/8" x 1 -1/4") Motors Compressors, Chillers, Condensers Refrigeration K-3 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 25 Refrigeration Compressors, Chillers, Condensers CARRIER ICE MAKING EQUIPMENT ACCESSORIES Electrical Motors Description Optional Agitator Kit Factory Installed Water Option CT350 Series Stacking Kit CB Series Stacking Kit 230 Lb. S/S Ice Storage Bin w/ 6legs 400 Lb. S/S Ice Storage Bin w/ 6legs 310 Lb. S/S Ice Storage Bin w/ 6legs 550 Lb. S/S Ice Storage Bin w/ 6legs 650 Lb. S/S Ice Storage Bin w/ 6legs 650 Lb. S/S Divided Ice Storage Bin w/ 6legs 950 Lb. S/S Ice Storage Bin w/ 6legs 950 Lb. S/S Divided Ice Storage Bin w/ 6legs CB650 Divider Kit CB950 Divider Kit Precharged Remote Condenser Precharged Remote Condenser Precharged Remote Condenser Precharged Remote Condenser 10’ Pre-Charged Line Set - R404a 20’ Pre-Charged Line Set - R404a 30’ Pre-Charged Line Set - R404a 40’ Pre-Charged Line Set - R404a 50’ Pre-Charged Line Set - R404a Heating Components VOLTAGE 115-60-1 n/a n/a n/a CT Series CT Series CB Series CB Series CB Series CB Series CB Series CB Series n/a n/a 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 ******* ******* ******* ******* ******* Indoor Air Quality MODEL NUMBER C102116901 C103100101 C102120703 C102120701 26CB230 26CB400 26CB310 26CB550 26CB650 26CB650D 26CB950 26CB950D C102122402 C102122401 26CRC114AP 26CRC214AP 26CRC314AP 26CRC524AP CLS1034P CLS2034P CLS3034P CLS4034P CLS5034P Shipping Weight Receptacle Type 135 lbs. 61kg 15 Amps, 125 Volts 1 Production capacity at 50°F water and 70°F air. Please observe minimum circuit ampacity. We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice. * Receptacle Type: 15 Amps , 125 Volts K-4 Accessories, Supplies & Commodities Electrical Supply 6-Foot Power Cord Condenser Amps Characteristics, w/NEMA 5 - 15 Plug Unit Type V-HZ-PH 26CK101A50* 110 115-60-1 – 10 air-cooled MODEL NUMBER Tools & Instruments 26CT550 SERIES DAILY CAPACITIES: Refrigeration Recommended Operating Requirements Plumbing: Lbs. of ice per 24 hours per unit 3/4" IPS potable water inlet fitting Min Max. Ambient Temp. .875" Dia. flex tubing drain Incoming Water Exterior Finish: 70°F (21°C) 90°F (32°C) Temp Air Temperatures 50°F (10°C) 95°F (35°C) Stainless steel 50°F (10°C) 110 lbs (50kg) — Water Temperatures 41°F (5°C) 95°F (35°C) Refrigerant: 70°F (21°C) — 78 lbs. (35kg) Water Pressures 15 PSIG 73 PSIG R-404A HFC Clearance Requirements: Allow 2" (5cm) each side Products are designed for indoor use and for operation within the above listed limits. Any deviation may eliminate Ice Sizes: coverage of factory waranties. 1.4" x 1.3" Failures caused by operation on voltages other than indicated on model nameplates are not considered defects. Oils & Chemicals Thermostats General Specifications for Carrier’s Residential Ice Maker a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 26 Electrical Motors Compressors, Chillers, Condensers Refrigeration CARRIER ICE MAKING EQUIPMENT 1. Exterior: All stainless steel standard. 2. Interior: Rotationally-molded polyethylene. 3. Plumbing Connections: Two 3/4" I.D. flex tubing for drains. Bin drain is isolated for sanitation. 4. Electrical: 7/8" diameter opening for conduit fitting. Field connection access on rear panel. 5. Motor: PSC type with automatic thermal overload. 6. Storage Capacity: Approx. 125 lbs. (56.67 kg). 7. Insulation: Polyurethane foam. 8. Ice Agitation: We recommend agitation to keep the ice in small, dispensable pieces when the 26CAKD is not in use for long periods of time. The optional agitation kit is 102116901. 9. Mechanism: Motor-driven auger. 10. Loading: Installation must include Carrier 26CT Series Ice Cuber. 11. Spout: Universally sized for glass filling and bucket filling. 12. Operation: Dispensing is continuous when push button is held. 13. Water/Glass Filler Option: Requires a separate potable water line 1/2" F.P.T. connection. We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice. Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Model Refrigeration Ice Sizes: Full Cube: 11/4" x 11/4" x 11/4" Half Cube: 11/4" x 11/4" x5/8" Cubelet:5/8" x5/8" x 11/4" General Specifications for 26CAKD-125 Dispenser Voltage Number of Wires Ice Prod. Per 24 hrs. Characteristics Plus Ground FLA 26CAKD-125 – 115-60-1 2 1.9 HP Condenser Unit Type Shipping Weights 1/2 – 169 lbs. 77kg Note: Electrical specifications are sized for within 80 ft. or less. All 26CAKD-125’s should be wired on a separate circuit. General Specifications for 26CT350 Series Plumbing: 1/4" FPT potable water inlet Condenser water supply inlet: 3/8 " FPT 3/4" FPT bin drain Condenser drain: 1/2" FPT 3/4" I.D. flex tubing cuber drain Exterior Finish: Stainless steel Refrigeration System: 5100 BTU Compressor. Thermostatic expansion-valve controlled. R-404A. Clearance Requirements: Allow 6" minimum clearance at back, top, and sides for ventilation and utility connections Ice Sizes: Full Cube: 11/4" x 11/4" x 11/4" Half Cube: 11/4" x 11/4" x5/8" Cubelet:5/8" x5/8" x 11/4" Recommended Operating Requirements Min. 45° 45° 20-100 PSIG 104-127V/198-253V Air Temperatures Water Temperatures Water Pressures Voltage Max. 90°F 90°F The above capacities are based on (HK) Half Cube and can be increased or reduced between 5-15% depending on cube size or by adjusting the cuber to produce concave cubes. Ice machines are designed for indoor use and for operation within the above listed limits. Any deviation may eliminate coverage of factory warranties. Failures caused by operation on voltages other than indicated on model nameplates are not considered defects. Model 26CT351A* 26CT351W* 26CT354A* 26CT354W* 314 321 314 321 Electrical Supply Number of CharacteristicsV-HZ- Wires Plus PH Ground 115-60-1 2 15.6 115-60-1 2 14.4 208/230-60-1 2 9.3 208/230-60-1 2 8.6 26CT351W Water-Cooled Ambient Temp. Incoming Water Temp. 70°F (21°C) 90°F (32°C) 50°F (10°C) 321 (145kg) — 70°F (21°C) — 299 (136kg) Max. Fuse Size, A 25 20 15 15 Condenser Unit Type Shipping Weights air-cooled water-cooled air-cooled water-cooled 164 lbs. 159 lbs. 164 lbs. 159 lbs. 26CT351A Air-Cooled Incoming Water Temp. 50°F (10°C) 70°F (21°C) Ambient Temp. 70°F (21°C) 314 (143kg) 90°F (32°C) — 247 (112kg) *Carrier Ice: To specify described cube size place “K” cubelet, “HK” half-cube, or “C” full cube in place of *asterisk in model numbers. 1 Production capacity at 50°F water and 70°F air. 2 Use this value to determine minimum wire size per National Electric Code Requirements. Please observe minimum circuit ampacity and max. fuse size listed above. Fuse or HACR-type circuit breaker branch circuit protection within the range of min. ampacity and max. fuse size shall be provided or warranty may be voided. We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice. K-5 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 27 26CB1250 Series Water-Cooled Ambient Temp. Incoming Water Temp. 70°F (21°C) 90°F (32°C) 50°F (10°C) 70°F (21°C) Exterior Finish: Stainless steel Refrigeration System: 26CB1250 Series uses a nominal 24,000 BTU compressor with dual R-404A thermostatic expansion-valve controlled evaporators. Clearance Requirements: Allow 6" minimum clearance at back and top, 4" left side and 8" right side for ventilation and utility connections. 1229 (562kg) — — 1160 (527kg) 26CB1250 Series Air-Cooled Ambient Temp. Incoming 90°F (32°C) Water Temp. 70°F (21°C) Ice Sizes: Full Cube: 11/4" x 11/4" x 11/4" Half Cube: 11/4" x 11/4" x5/8" Cubelet:5/8" x5/8" x 11/4" 50°F (10°C) 1083 (492kg) 70°F (21°C) — — 1065 (483kg) 26CB1250 Series Remote Air-Cooled 1, 4 Ambient Temp. Incoming Water Temp. 70°F (21°C) 90°F (32°C) 50°F (10°C) 1215 (552kg) — 70°F (21°C) — 1160 (527kg) The above capacities are based on (HK) Half Cube and can be increased or reduced between 5-15% depending on cube size or by adjusting the cuber to produce concave cubes. Ice machines are designed for indoor use and for operation within the above listed limits. Any deviation may eliminate coverage of factory warranties. Failures caused by operation on voltages other than indicated on model nameplates are not considered defects. Model 26CB1254W* 26CB1254R* 26CB1255W* 26CB1255R* 1229 1215 1229 1215 Electrical Supply Characteristics, V-HZ-PH 208/230-60-1 208/230-60-1 208/230-60-3 208/230-60-3 Number of Wires Plus Ground 2 2 3 3 32 324 16.9 17.64 Max. Fuse Size, A Condenser Unit Type 55 55 25 25 water-cooled remote air-cooled water-cooled remote air-cooled Shipping Weights 333 lbs. 345 lbs. 333 lbs. 345 lbs. 151kg 156kg 151kg 156kg Tools & Instruments Accessories, Supplies & Commodities *Carrier Ice: To specify described cube size place “K” cubelet, “HK” half-cube, or “C” full cube in place of *asterisk in model numbers. 1 3 Condenser inlet temperature 70°. Use this value to determine minimum wire size per National Electric Code Requirements. 2 4 Production capacity at 50°F water and 70°F air. Condenser Remote Fan supplied separately. Please observe wire size listed above. Fuse or HACR-type circuit breaker of same rating, shall be provided on installation or warranty may be voided. We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice. Motors Max. 90°F 90°F Electrical 45° 45° 20-100 PSIG 198-253V Heating Components Min. Air Temperatures Water Temperatures Water Pressures Voltage Indoor Air Quality 26CB1250 SERIES DAILY CAPACITIES: Lbs. of ice per 24 hours per unit Recommended Operating Requirements K-6 Refrigeration Plumbing: 1/2" FPT potable water inlet. Condenser drain for 26CB1250 Series water cooled unit 1/2 " FPT, supply 3/8 " FPT. Two 3/4 " I.D. flexible tubes are provided for ice maker drains through the rear of the bin and cabinet. Thermostats General Specifications for 26CB1250 Series Oils & Chemicals CARRIER ICE MAKING EQUIPMENT Compressors, Chillers, Condensers Refrigeration a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 28 Motors Compressors, Chillers, Condensers Refrigeration CARRIER ICE MAKING EQUIPMENT General Specifications for 26CB450 Series Plumbing: 1/4" FPT potable water inlet Condenser water supply inlet: 3/8" FPT 1" FPT bin drain Condenser drain: 1/2" FPT 3/4" I.D. flex tubing cuber drain 26CB450 SERIES DAILY CAPACITIES: Lbs. of ice per 24 hours per unit Recommended Operating Requirements Min. Air Temperatures 45° Water Temperatures 45° Water Pressures 20-100 PSIG Voltage 104-126V/198-253V Heating Components Electrical Exterior Finish: Stainless steel Refrigeration System: 3/4 HP Compressor. Thermostatic expansion-valve controlled. R-404A HFC. Indoor Air Quality 50°F (10°C) 70°F (21°C) Ice Sizes: Full Cube: 11/4" x 11/4" x 11/4" Half Cube: 11/4" x 11/4" x5/8" Cubelet: 5 /8" x5/8" x 11/4" 26CB451A* 26CB451W* 26CB454A* 26CB454W* 460 460 460 460 Electrical Supply Characteristics, V-HZ-PH 115-60-1 115-60-1 208/230-60-1 208/230-60-1 460 (209kg) — — 443 (201kg) 26CB451A/CB454A Air-Cooled Ambient Temp. Incoming 90°F (32°C) Water Temp. 70°F (21°C) Number of Wires Plus Ground 2 2 2 2 19.9 16.4 11.9 11.3 Max. Fuse Size, A Condenser Unit Type 30 25 20 15 air-cooled water-cooled air-cooled water-cooled Shipping Weights 197 lbs. 195 lbs. 197 lbs. 195 lbs. 89kg 88kg 89kg 88kg *Carrier Ice: To specify described cube size place “K” cubelet, “HK” half-cube, or “C” full cube in place of *asterisk in model numbers. 1 Production capacity at 50°F water and 70°F air. 2 Use this value to determine minimum wire size per National Electric Code Requirements. Please observe minimum circuit ampacity and max. fuse size listed above. Fuse or HACR-type circuit breaker branch circuit protection within the range of min. ampacity and max. fuse size shall be provided or warranty may be voided. We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice. Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats 26CB451W/CB454W Water-Cooled Ambient Temp. Incoming Water Temp. 70°F (21°C) 90°F (32°C) Clearance Requirements: Allow 4" left side, 8" right side, and 6" 50°F (10°C) 314 (143kg) — back and top for ventilation and utility 70°F (21°C) — 393 (178kg) connections. The above capacities are based on (HK) Half Cube and can be increased or reduced between 5-15% depending on cube size or by adjusting the cuber to produce concave cubes. Ice machines are designed for indoor use and for operation within the above listed limits. Any deviation may eliminate coverage of factory warranties. Failures caused by operation on voltages other than indicated on model nameplates are not considered defects. Model Refrigeration Max. 90°F 90°F K-7 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 29 General Specifications for 26CB650 Series 26CB650 SERIES DAILY CAPACITIES: Lbs. of ice per 24 hours per unit Clearance Requirements: Allow 4" left side, 8" right side, and 6" back and top for ventilation and utility connections. 50°F (10°C) 70°F (21°C) 593 (269kg) — — 563 (255kg) 26CB654A Air-Cooled Ice Sizes: Full Cube: 11/4" x 11/4" x 11/4" Half Cube: 11/4" x 11/4" x5/8" Cubelet:5/8" x5/8" x 11/4" Ambient Temp. Incoming Water Temp. 70°F (21°C) 90°F (32°C) 50°F (10°C) 70°F (21°C) 597 (271kg) — — 498 (226kg) 26CB654R Remote Air-Cooled 1, 4 Ambient Temp. Incoming Water Temp. 70°F (21°C) 90°F (32°C) 50°F (10°C) 600 (273kg) — 70°F (21°C) — 592 (269kg) The above capacities are based on (HK) Half Cube and can be increased or reduced between 5-15% depending on cube size or by adjusting the cuber to produce concave cubes. Ice machines are designed for indoor use and for operation within the above listed limits. Any deviation may eliminate coverage of factory warranties. Failures caused by operation on voltages other than indicated on model nameplates are not considered defects. Model Electrical Supply Number of Wires Max. Fuse Size, A Condenser Unit Shipping Weights Characteristics, Plus Ground Type V-HZ-PH 26CB654A* 597 208/230-60-1 2 18.0 30 air-cooled 228 lbs. 103kg 26CB654W* 593 208/230-60-1 2 17.3 30 water-cooled 215 lbs. 98kg 26CB654R* 600 208/230-60-1 2 17.44 30 remote air-cooled 216 lbs. 98kg Tools & Instruments Accessories, Supplies & Commodities *Carrier Ice: To specify described cube size place “K” cubelet, “HK” half-cube, or “C” full cube in place of *asterisk in model numbers. 1 3 Condenser inlet temperature 70°. Use this value to determine minimum wire size per National Electric Code Requirements. 2 4 Production capacity at 50°F water and 70°F air. Condenser Remote Fan supplied separately. Please observe minimum circuit ampacity and max. fuse size listed above. Fuse or HACR-type circuit breaker branch circuit protection within the range of min. ampacity and max. fuse size shall be provided or warranty may be voided. We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice. Electrical Refrigeration System: 1 1/2 HP Compressor. Thermostatic expansion-valve controlled. R-404A HFC. 26CB654W Water-Cooled Ambient Temp. Incoming Water Temp. 70°F (21°C) 90°F (32°C) Heating Components Exterior Finish: Stainless steel Max. 90°F 90°F Indoor Air Quality 45° 45° 20-100 PSIG 198-253V Thermostats Min. Air Temperatures Water Temperatures Water Pressures Voltage Oils & Chemicals Recommended Operating Requirements K-8 Refrigeration Plumbing: 1/4" FPT potable water inlet Condenser water supply inlet: 3/8" FPT 1" FPT bin drain Condenser drain: 1/2" FPT 3/4" I.D. flex tubing cuber drain Motors CARRIER ICE MAKING EQUIPMENT Compressors, Chillers, Condensers Refrigeration a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 30 Motors Compressors, Chillers, Condensers Refrigeration CARRIER ICE MAKING EQUIPMENT General Specifications for 26CT551 Series: Plumbing: 1/4" FPT potable water inlet Condenser water supply inlet: 3/8" FPT 1" FPT bin drain Condenser drain: 1/2" FPT 3/4" I.D. flex tubing cuber drain Recommended Operating Requirements 26CT550 SERIES DAILY CAPACITIES: Lbs. of ice per 24 hours per unit Min. Air Temperatures Water Temperatures Water Pressures Voltage 45° 45° 20-100 PSIG 198-253V Refrigeration System: 3/4 HP Compressor. Thermostatic expansion-valve controlled. R-404A HFC. Clearance Requirements: Allow 4" left side, 4" right side, and 8" back and top for ventilation and utility connections. Refrigeration 26CT551W Series Water-Cooled Ambient Temp. Incoming Water Temp. 70°F (21°C) 90°F (32°C) 50°F (10°C) 70°F (21°C) Ice Sizes: Full Cube: 11/4" x 11/4" x 11/4" Half Cube: 11/4" x 11/4" x5/8" Cubelet:5/8" x5/8" x 11/4" 515 (234kg) — — 423 (192kg) 26CT551A Series Air-Cooled Ambient Temp. Incoming Water Temp. 70°F (21°C) 90°F (32°C) 50°F (10°C) 70°F (21°C) 520 (236kg) — — 423 (192kg) 26CT551R Series Remote Air-Cooled1, 4 Ambient Temp. Incoming Water Temp. 70°F (21°C) 90°F (32°C) 50°F (10°C) 539 (245kg) — 70°F (21°C) — 453 (206kg) The above capacities are based on (HK) Half Cube and can be increased or reduced between 5-15% depending on cube size or by adjusting the cuber to produce concave cubes. Ice products are designed for indoor use and for operation within the above listed limits. Any deviation may eliminate coverage of factory warranties. Failures caused by operation on voltages other than indicated on model nameplates are not considered defects. Model Electrical Supply Number of Wires Max. Fuse Size, A Condenser Unit Shipping Weights Characteristics, Plus Ground Type V-HZ-PH 26CT551A* 520 115-60-1 2 23.4 35 air-cooled 194 lbs. 88kg 26CT551W* 520 115-60-1 2 17.9 30 water-cooled 190 lbs. 86kg 26CT551R* 520 115-60-1 2 20.0 30 remote air-cooled 198 lbs. 90kg 26CT554A* 520 208/230-60-1 2 14.9 25 air-cooled 194 lbs. 88kg 26CT554W* 520 208/230-60-1 2 14.3 20 water-cooled 190 lbs. 86kg *Carrier Ice: To specify described cube size place “K” cubelet, “HK” half-cube, or “C” full cube in place of *asterisk in model numbers. 1 3 Condenser inlet temperature 70°. Use this value to determine minimum wire size per National Electric Code Requirements. 2 4 Production capacity at 50°F water and 70°F air. Condenser Remote Fan supplied separately. Please observe minimum circuit ampacity and max. fuse size listed above. Fuse or HACR-type circuit breaker branch circuit protection within the range of min. ampacity and max. fuse size shall be provided or warranty may be voided. We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice. Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Exterior Finish: Stainless steel Max. 90°F 90°F K-9 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 31 TDEB TE AKV TR6 R-22 R-410A R-134A R-404A/507 Straightway 1/4 X 3/8 1/4 X 1/2 3/8 X 3/8 3/8 X 1/2 1/2 X 5/8 0.19-3.50 Angleway/ Straightway Internal/ External 1/4 X 3/8 1/4 X 1/2 3/8 X 3/8 3/8 X 1/2 0.19-3.50 0.19-3.50 Angleway/ Straightway Internal/ External 1/4 X 3/8 1/4 X 1/2 3/8 X 3/8 3/8 X 1/2 0.11-3.00 0.11-2.60 Angleway Internal/ External Straightway External 0.13-3.50 0.13-3.50 Bi flow, Stainless Steel body/cap tube/bulb, Adjustable Superheat 0.174.50 0.19-3.50 Bi flow, Stainless Steel body/cap tube/bulb, NonAdjustable Superheat 0.174.50 0.154.50 Commercial HVAC Heat Pump Transport Refrigeration Take a part valve, High capacity capability Supermarket Cases Walk-In-Coolers Ice-Machines Residential A/C Electronic expansion valves Optimized for split system A/C & Heat Pump 0.203.00 3.0-7.5 7.5-40.0 TE 5 2.0-8.0 3.0-12.0 TE 12 3.0- 4.5-18.0 TE 20 12.0 30.0 TE 55 20.0 33.050.055.0 85.0 AKV 10 0.3-5.7 AKV 15 7.2-29.0 1-6 SAE X ODF X ODF ODF Internal/ External 0.174.50 Interchangeable orifice, available with or w/o Maximum Operating Pressure (MOP), Adjustable Superheat High capacity capability, Bi flow, available with or w/o Maximum Operating Pressure (MOP), adjustable superheat Commercial HVAC Balanced Port, High Heat Pump capacity capability, Transport Bi flow, available Refrigeration with or w/o MOP, Adjustable Superheat Connections SAE X SAE Straightway External 3.7-11.2 4.7-15.0 18.0 41.0-62.0 3.7-10.3 4.2-13.4 16.5 37.0-56.0 Angleway/ Straightway Straightway Straightway Straightway External External External External 0.2-4.4 6.0-24.0 0.2-4.8 5.6-22.2 Angleway Straightway Straightway Internal Internal Internal Sensor & Transducer 3-5 3/8 X 1/2 3/8 X 1/4 X 1/2 1/2 3/8 X 1/2 3/8 X 5/8 1/2 X 5/8 1/2 X 7/8 5/8 X 7/8 5/8 X 7/8 5/8 X 1-1/8 7/8 X 1-1/8 7/8 X 1-3/8 1/2 X 5/8 1-1/8 X 1-3/8 1/2 X 5/8 1/2 X 7/8 5/8 X 7/8 7/8 X 1-1/8 3/8 X 1/2 1/2 X 5/8 Motors Interchangeable orifice, Bi flow, Stainless Steel body/cap tube/bulb, Adjustable Superheat Pressure Equalization Electrical R-12 Supermarket Cases Walk-In-Coolers Residential A/C TUA(E) Ice-Machines Heat Pump Transport Refrigeration Food Dispensers Supermarket Cases Walk-In-Coolers Residential A/C Commercial HVAC TUB(E) Ice-Machines Heat Pump Transport Refrigeration Food Dispensers Supermarket Cases Walk-In-Coolers Residential A/C Commercial HVAC TUC(E) Ice-Machines Heat Pump Transport Refrigeration Food Dispensers Supermarket Cases Walk-In-Coolers Residential A/C IceT(E)2 Machines Heat Pump Transport Refrigeration Food Dispensers Commercial HVAC Heat Pump Transport TDE Refrigeration Body Type Heating Components Models Indoor Air Quality Features Tools & Instruments Applications K-10 Refrigeration Valve Thermostats Thermostatic Expansion Valves Nominal Capacity Ranges in TR for Range N -40 to 50°F Oils & Chemicals DANFOSS TYPE TUA(E), TUB(E), TUC(E), T(E)2, TDE, TDEB, TE, TXI 2, AKV Accessories, Supplies & Commodities DANFOSS THERMOSTATIC EXPANSION VALVES Compressors, Chillers, Condensers Refrigeration a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 32 Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration DANFOSS THERMOSTATIC EXPANSION VALVES DANFOSS TYPE T2 & TE2 Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments SYSTEM DANFOSS CONNECTIONS INCLUDED IN KIT CAPACITY (TR) CODE 3/8 X 3/8 ODF CHATLEFF AEROQUIP 3 067L5955 X X X 4 067L5956 X X X 5 067L5957 X X X 1, 1.5 , 2 067L5856 X X X 2.5, 3 067L5857 X X X 3.5 , 4 067L5858 X X X 5, 6 067L5859 X X X R410A UNIVERSAL TR 6 KIT FOR AIR CONDITIONING Upgrade for energy savings Patented, internal check valve For Air Conditioning and heat pump systems R-22 A complete it – easily retrofit existing systems 3 connection options in every kit o 3/8” x 3/8” ODF Patented double contact bulb o Chatleff • Fast and easy to install o Aeroquip • Good temperature transfer from pipe to bulb Adjustable superheat Anti-hunt sensing bulb Valves for special temperature ranges can be Stainless Steel power head, laser welded supplied. Stainless Steel cap tube resists vibration 5 ft. long capillary tube R-22 and R-410A versions • Chatleff and Aeroquip adapters Kit includes: •Valve body with 3/8” x 3/8” ODF con- • 35” foam insulating tape • PATENTED easy secure copper bulb strap nections • Built-in check valve for heat pumps • Instructions Adjustable Superheat Equilization line: 24” with flarenut: capillary tube: 31.5” Connections: 3/8” x 3/8” ODF, Aeroquip and chatleff adapters supplied Refrigerant Valve Type TX 2 TEX 2 TN 2 R-134a TEN 2 TS 2 R-404A/ R-507 TES 2 R-22 Refrigeration REFRIGERANT FEATURES: Large temperature range Equally applicable to freezing, refrigeration, and air conditioning applications. Interchangeable orifice assembly • Easier stocking • Easy capacity matching • Better service Can be supplied with MOP (Max. Operating Pressure) • Protects the compressor motor against excessive evaporating pressure during normal operation ORDERING Components with Flare x Flare Connections Thermostatic element and valve body with bulb strap (without orifice and filter) Pressure Equalization1) Capillary Tube (ft) Int. Ext. Int. Ext. Int. Ext. 5 5 5 5 5 5 Connection Range N –40 to +50° Inlet x Outlet F (in. x in.) Without With MOP MOP 3/8 x 1/2 068Z3206 068Z3208 3/8 x 1/2 068Z3209 068Z3211 3/8 x 1/2 068Z3346 068Z3347 3/8 x 1/2 068Z3348 068Z3349 3/8 x 1/2 068Z3400 068Z3402 3/8 x 1/2 068Z3403 068Z3405 PART NO. Range NM – Range NL –40 Range B –75 to –15° 40 to +25° F to +5° F F Without With MOP With MOP With MOP MOP 068Z3224 068Z3226 068Z3207 068Z3228 068Z3225 068Z3227 068Z3210 068Z3229 068Z3393 068Z3369 068Z3392 068Z3370 068Z3406 068Z3408 068Z3401 068Z3410 068Z3407 068Z3409 068Z3404 068Z3411 Orifice Assembly with Filter Rated capacity in nominal tons (TR) Range N: –40 to +50° F PART NO 068-2002 068-2003 068-2010 068-2015 068-2006 068-2007 068-2008 068-2009 ORIFICE SIZE 0X 0 1 2 3 4 5 6 R-22 0.15 0.3 0.7 1 1.5 2.3 3 4.5 R-407C 0.16 0.3 0.8 1.1 1.6 2.5 3.2 4.9 Rated capacity is based on: Evaporating temperature te = +40° F for range N and te = –20° F for range B Condensing temperature tc = +90° F Refrigerant liquid temperature ahead of valve tl = +80° F K-11 R-134A 0.11 0.25 0.5 0.8 1.3 1.9 2.5 3 R-404A/R-507 0.11 0.21 0.45 0.6 1.2 1.7 2.2 2.6 Range B: –75 to –15° F R-22 0.15 0.2 0.3 0.6 0.8 1.2 1.5 2 R-404A/R-507 0.11 0.21 0.45 0.6 1 1.4 1.7 1.9 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 33 ORIFICE NO. 0 1 2 3 4 5 6 7 8 9 R-22 0.17 0.25 0.36 0.50 0.75 1.00 1.5 2.0 3.0 4.5 RANGE N: -40 to 50°F R-134a R-404A 0.13 0.13 0.19 0.19 0.28 0.28 0.39 0.39 0.59 0.60 0.78 0.79 1.2 1.2 1.6 1.6 2.3 2.4 3.5 3.5 1) According to ARI 750-94. Rated capacities for range N are based on: Liquid temperature ahead of expansion valve tl = 100° F Evaporating temperature te = 40° F Pressure drop across valve Δp = 60 psi for R-134a Pressure drop across valve Δp = 100 psi for R-22, R-404A and R-507. Spare Parts Filter (24 pcs): 068U1706 (100 Mesh) (24 pcs): 068U0016 (50 Mesh) Gasket (24 pcs): 068U0015 NOTE: To secure tightness, the orifice gasket must be changed each time the orifice is disassembled. R-507 0.13 0.19 0.27 0.38 0.57 0.76 1.1 1.5 2.3 3.4 R-22 0.15 0.19 0.24 0.34 0.50 0.66 1.0 1.3 2.0 2.9 RANGE B: -60 to -15°F R-404A R-507 0.10 0.11 0.14 0.15 0.18 0.20 0.25 0.28 0.37 0.41 0.50 0.55 0.75 0.82 1.0 1.1 1.5 1.7 2.2 2.4 Rated capacities for range B are based on: Liquid temperature ahead of expansion valve tl = 100° F Evaporating temperature te = –40° F Pressure drop across valveΔ p = 100 psi for R-134a Pressure drop across valve Δp = 150 psi for R-22, R404A, R-507C and R-507. Metric conversions 1 psi = 0.07 bar 5/9 (t1° F – 32) = t2° C 1 ton = 3.5 kW 1 in. = 25.4 mm K-12 PART NO. 68U1030 68U1031 68U1032 68U1033 68U1034 68U1035 68U1036 68U1037 68U1038 68U1039 Heating Components Indoor Air Quality Thermostats Rated capacity in tons nominal (TR)1) Oils & Chemicals Orifice assembly with filter and gasket Accessories, Supplies & Commodities Pressure Capillary Tube CONNECTIONS Range N .40—50 F w/o Range N -40-50F Range B -60 - 15F Equalization1) (in) ODF x ODF (in) MOP MOP 60 F MOP .4 F Int. 59 1/4 x 1/2 068U2234 068U2242 . Int. 59 3/8 x 1/2 068U2235 068U2243 . Ext. 1/4 in. 59 1/4 x 1/2 068U2236 068U2244 . Ext. 1/4 in. 69 3/8 x 1/2 068U2237 068U2245 . Int. 59 1/4 x 1/2 068U2204 068U2212 . Int. 59 3/8 x 1/2 068U2205 068U2213 . Ext. 1/4 in. 59 1/4 x 1/2 068U2206 068U2214 . Ext. 1/4 in. 59 3/8 x 1/2 068U2207 068U2215 . Int. 59 1/4 x 1/2 068U2284 068U2292 068U2316 Int. 59 3/8 x 1/2 068U2285 068U2293 068U2317 Ext. 1/4 in. 59 1/4 x 1/2 068U2286 068U2294 068U2318 Ext. 1/4 in. 59 3/8 x 1/2 068U2287 068U2295 068U2319 Tools & Instruments Valve Type TUA TUA TUAE TUAE TUA TUA TUAE TUAE TUA TUA TUAE TUAE Refrigeration Refrigerant R-22 R-22 R-22 R-22 R-134a R-134a R-134a R-134a R-404A/ R-507 R-404A/ R-507 R-404A/ R-507 R-404A/ R-507 Electrical Ordering Thermostatic element and valve body with bulb strap (without orifice and filter) R-22, R-134a, R-404A, R-507 Motors DANFOSS THERMOSTATIC EXPANSION VALVES DANFOSS TYPE TUA/TUAE TUA-TUAE Range 1/6 to 41/2 TR (R-22) FEATURES • Type TUA/TUAE is available with interchangeable orifice assembly and removable strainer in a straightway design. • The valves are offered in rated capacities up to 4.5 TR (R-22) and can be used in a wide range of applications. • The TUA/TUAE is made of stainless steel and therefore is especially well-suited to refrigeration systems where aggressive environments exist. • The TUA/TUAE has been developed and designed especially for soldering into hermetic refrigeration systems. • Removable Strainer- Suitable for use with new POE oils • Maximum working pressure MWP=500 PSIG MWPR410A=615PSIG • Bi-Flow operation, with flow in opposite direction, the rated capacity is reduced by up to 15%. • TUAE Models (Except Orifice 9) can be used for Bi-Flow operation. Compressors, Chillers, Condensers Refrigeration a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 34 DANFOSS THERMOSTATIC EXPANSION VALVES DANFOSS TYPE TUB,TUBE INTRODUCTION Type TUB Range 1/4 to 41/2 (R-22) The TU series of thermostatic expansion valves is specifically developed for soldering into hermetic refrigeration systems. TU valves are offered in rated capacities up to 4.5 TR (R-22) and can be used in a wide range of applications. The TU is made of stainless steel and therefore is well-suited to refrigeration systems for aggressive environments and for the food industry. TUC, TUCE TUB, TUBE • Internal (TUC) or external (TUCE) • Internal (TUB) or external (TUBE) equalization equalization • Fixed orifice and strainer • Fixed orifice and strainer • Adjustable superheat • Fixed superheat • Angleway body (optional) • Angleway body Thermostatic charge options In addition to the standard range, TU is also available with the following range options: Range N: –40 to +50°F MOP +60°F Range NM: –40 to +25°F MOP +32°F Range B 1) –75 to –15°F Range B 1) –75 to –15° MOP –4°F 1) TU valves for range B are not supplied for R-134a. ORDERING Angleway Valve Body with 2.6 ft. cap. tube and bulb strap 1) Range N: –40 to +50°F (without MOP) Valve Type Accessories, Supplies & Commodities Tools & Instruments Refrigeration Connec Press Orifice R-22 . no. 2) -tion Range N –40 Solder equal. to +50°F ODF inlet Rated Part No. x outlet capacity in. TR 3) 1 0.25 068U2057 2 0.36 068U2058 1/4 x 1/2 TUB Int. 3/8 x 1/2 Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration 1/4 x 1/2 Ext. 1/4 in. solder ODF TUBE 3/8 x 1/2 R-134a Range N –40 to +50°F Rated Part No. capacity TR 3) 0.19 068U2027 0.28 068U2028 R-404A/R-507 R-410A Range N –40 Range N –40 to +50°F to +50°F Rated Part No. Rated Part No. capacity capacity TR 3) TR 3) 0.19 068U2094 0.40 068U1958 0.28 068U2095 0.60 068U1959 3 0.50 068U2059 0.39 068U2029 0.39 068U2096 0.80 068U1960 4 0.75 068U2060 0.59 068U2030 0.60 068U2097 1.30 068U1961 5 1.00 068U2061 0.78 068U2031 0.79 068U2098 1.70 068U1962 6 1.50 068U2062 1.20 068U2032 1.20 068U2099 2.50 068U1963 1 0.25 068U2157 2 0.36 068U2179 3 0.50 068U2180 4 5 0.75 1.00 068U2183 068U2181 6 1.50 068U2182 7 2.00 068U2063 8 1 2 3 4 5 6 1 2 3 4 3.00 068U2064 0.75 1.00 1.50 0.25 0.36 0.50 0.75 068U2070 068U2071 068U2072 068U2159 068U2160 068U2161 068U2162 0.39 0.59 0.78 1.20 068U2020 068U2021 068U2022 068U2023 0.19 0.28 0.39 0.60 0.79 1.20 068U2103 068U2104 068U2105 068U2106 068U2107 068U2108 5 6 7 1.00 1.50 2.00 068U2163 068U2164 068U2073 1.60 068U2024 1.60 068U2109 3.40 068U1973 8 9 3.00 4.50 068U2074 068U2075 2.30 3.50 068U2025 068U2026 2.40 3.50 068U2110 068U2111 5.00 7.50 068U1974 068U1975 1) The TUB series is also available with 5 ft. cap. tube. Please contact Danfoss for further information. 2) All TUB and TUBE valves with orifice #9 cannot be used for bi-flow operation. 3) According to ARI 750-01 Rated capacities for range N are based on: Liquid temperature ahead of expansion valve t1 = 100°F Evaporating temperature te = 40°F Pressure drop across valve Δp = 60 psi for R-134a Pressure drop across valve Δp = 100 psi for R-22, R-404A, & R-507 Pressure drop across valve Δp = 160 psi for R-410A K-13 Metric conversions 1 psi = 0.07 bar 5/9 (t1 °F – 32) = t2 °C 1 ton = 3.5 kW 1 in. = 25.4 mm a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 35 Refrigeration TS2 068Z3414 TES2 068Z3415 Nominal Capacity* 0X 068-2002 068-2089 1/5 1/10 1/10 00 068-2003 068-2090 1/5 01 068-2010 068-2091 1/3 1/5 1/3 1/4 1/5 1/3 7/10 1/2 02 068-2015 068-2092 1/2 1/3 1/2 1 3/4 1/2 03 068-2006 068-2093 1 1 11/2 11/4 1 04 068-2007 068-2094 11/2 11/2 21/3 13/4 11/2 05 068-2008 068-2095 2 2 3 2 1/4 2 06 068-2009 068-2096 3 3 4 1/2 3 3 Solder adapters for Sweat Style valves: 068-2062 for 1/4” OD pipe 068-2060 for 3/8” OD pipe * Valve capacity is rated at 40°F evaporating temperature, 90°F condensing temperature, and 80°F refrigerant temperature ahead of valve. Part No. T2 00MMKBOX01 TUA 00MMKBOX02 Accessories, Supplies & Commodities Service Kit Oils & Chemicals Capacity selection charts and a pressure–temperature slide rule are included in each kit. Create your own custom kits by ordering the case and your selection of valves separately. Motors TS2 068Z3400 TES2 068Z3403 Electrical TX2 068Z3281 TEX2 068Z3284 TN2 068Z3346 TEN2 068Z3348 TN2 068Z3383 TEN2 068Z3385 Heating Components Orifice No. Part No. (flare) Part No. (sweat) TX2 068Z3206 TEX2 068Z3209 Indoor Air Quality TY2 068Z3212 TEY2 068Z3215 TY2 068Z3282 TEY2 068Z3285 Thermostats TF2 068Z3202 TEF2 068Z3204 TF2 068Z3280 TEF2 068Z3283 Tools & Instruments Each case contains a valve capacity table. This case does not come with valves and orifices. K-14 Refrigeration Flare Style Valves (Internally Equalized) Flare Style Valves (Externally Equalized) Sweat Style Valves (Internally Equalized) Sweat Style Valves (Externally Equalized) Compressors, Chillers, Condensers DANFOSS THERMOSTATIC EXPANSION VALVES DANFOSS MINIMIZER EXPANSION VALVE SERVICE KITS T2 and TE2 Selection Chart for Thermostatic Expansion Valves Choose valve by refrigerant and style, then read down to the required capacity in tons and select orifice. a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 36 Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration DANFOSS MINIMIZER EXPANSION VALVE SERVICE KITS Minimizer-Sweat Select Valve Body and Orifice Size This Kit contains TU type expansion valves which have Sweat (ODF) connections Internally Equalized Valve Bodies Externally Equalized Valve Bodies Part No. Orifice size 068U1030 0 068U1031 1 068U1032 2 068U1033 3 068U1034 4 068U1035 5 068U1036 6 068U1037 7 068U1038 8 068U1039 9 R 22 R 134a R 404A/R 507 TUA 068U2235 TUA 068U2205 TUA 068U2285 TUAE 068U2237 TUAE 068U2207 TUAE 068U2287 Nominal Capacity (Tons) for –40 to +50°F Range 1/6 1/8 1/8 1/4 1/5 1/5 1/3 1/4 1/4 1/2 1/3 1/3 3/4 1/2 1/2 1 3/4 3/4 1 1/2 1 1 2 1 1/2 1 1/2 3 2 2 1/4 4 1/2 3 3 1/2 Select Valve Body and Orifice Size. Internally Equalized Externally Equalized Part No. Orifice size 068-2002 0X 068-2003 00 068-2010 01 068-2015 02 068-2006 03 068-2007 04 068-2008 05 068-2009 06 R 22 R 134a R 404A/R 507 TX2 068Z3206 TN2 068Z3346 TS2 068Z3400 TEX2 068Z3209 TEN2 068Z3348 TES2 068Z3403 Nominal Capacity (Tons) for –40 to –10°F Range 1/6 1/10 1/10 1/3 1/4 1/5 3/4 1/2 1/3 1 3/4 1/2 1-1/2 1-1/3 1 2-1/3 1-3/4 1-1/2 3 2-1/5 2 4-1/2 3 3 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Minimizer-Flare K-15 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 37 Refrigeration Compressors, Chillers, Condensers DANFOSS MAXIMIZER KIT Ordering TU Orifice no. 1 068U1032 TU Orifice no. 2 068U1033 TU Orifice no. 3 068U1034 TU Orifice no. 4 068U1035 TU Orifice no. 5 068U1036 TU Orifice no. 6 068U1037 TU Orifice no. 7 068U1038 TU Orifice no. 8 068U1039 TU Orifice no. 9 Orifice Selection-I Select Valve Body and Orifice Size—Flare. Internally Equalized Valve Bodies Externally Equalized Valve Bodies Part No. Orifice size 068-2002 0X 068-2003 00 068-2010 01 068-2015 02 068-2006 03 068-2007 04 068-2008 05 068-2009 06 R 22 R 134a R 404A/R 507 TX2 068Z3206 TN2 068Z3346 TS2 068Z3400 TEX2 068Z3209 TEN2 068Z3348 TES2 068Z3403 Nominal Capacity (Tons) for –40 to +50°F Range 1/6 1/10 1/10 1/3 1/4 1/5 3/4 1/2 1/3 1-1/2 3/4 1/2 1-1/2 1-1/4 1 2-1/3 1-3/4 1-1/2 3 2-1/4 2 4-1/2 3 3 Orifice Selection-II Select Valve Body and Orifice Size—Sweat. Internally Equalized Valve Bodies Externally Equalized Valve Bodies Part No Orifice size 068U1030 0 068U1031 1 068U1032 2 068U1033 3 068U1034 4 068U1035 5 068U1036 6 068U1037 7 068U1038 8 068U1039 9 R 22 R 134a R 404A/R 507 TUA 068U2235 TUA 068U2205 TUA 068U2285 TUAE 068U2237 TUAE 068U2207 TUAE 068U2287 Nominal Capacity (Tons) for –40 to +50°F Range 1/6 1/8 1/8 1/4 1/5 1/5 1/3 1/4 1/4 1/2 1/3 1/3 3/4 1/2 1/2 1 3/4 3/4 1-1/2 1 1 2 1-1/2 1-1/2 3 2 2-1/4 4-1/2 3 3-1/2 K-16 Electrical TU Orifice no. 0 068U1031 Heating Components 068U1030 Indoor Air Quality PRODUCT Thermostats PART NO Oils & Chemicals PRODUCT T/E Orifice no. 04 T/E Orifice no. 05 T/E Orifice no. 06 TU Metal Gasket Allen Wrench TUA R 22 TUAE R 22 TUA R 134a TUAE R 134a TUA R 404A/507 TUAE R 404A/507 Accessories, Supplies & Commodities PART NO 068-2007 068-2008 068-2009 068U0015 WRENCH 068U2235 068U2237 068U2205 068U2207 068U2285 068U2287 Tools & Instruments PRODUCT TX2 TEX2 TN2 TEN2 TS2 TES2 T/E Orifice no. 0X T/E Orifice no. 00 T/E Orifice no. 01 T/E Orifice no. 02 T/E Orifice no. 03 Refrigeration PART NO 068Z3206 068Z3209 068Z3346 068Z3348 068Z3400 068Z3403 068-2002 068-2003 068-2010 068-2015 068-2006 Motors INTRODUCTION Building on the success of the Minimizer Kit -- every TEV you need - both flare and sweat - in one convenient kit • 12 valves and 20 orifices = 105 size combinations from 1/10 to 41/2 TR • Cut out unnecessary supply house runs - the right valve is always on the truck • Sweat valves have bi-metal connections - no wet wrap required • Factory superheat setting - no adjustment after assembly • Sizing and selection chart • Durable fitted case • Easy to refill a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 38 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration DANFOSS TYPE TDE & TDEB (R22) TEV04 INTRODUCTION TDE Range 3 – 7 1/2 TR TDEB Range 8 – 40 TR The TDE series of thermostatic expansion valves is designed for use in: • Air conditioning systems • Heat pumps • Water chillers • Refrigerated containers • Traditional refrigeration systems The TDE product programs consist of two hermetic valve designs: • Single port (type TDE) and balanced port (type TDEB).Valve selection is determined by the application and the capacity required. Single port version (type TDE) • The single port’s simplified construction is designed for use on systems with small capacities (3 to 7.5 TR R 22). Single port design is effective because in smaller capacities condensing pressure is negligible. Type TDE single port valves can also be used for bi-flow applications in the same capacity range. Balanced port versions (type TDEB) • The balanced port design has been developed for large capacity systems (greater than 8 to 40 TR) where fluctuating condensing pressures are present. • The balanced port feature eliminates any influence by condensing pressure on the expansion valve function in the normal flow direction. • The TDEB design is unique in that it also provides a balance function in the reverse flow direction making it ideal for use in biflow applications. All TDE valves are available with a selection of bulb charges with or without maximum operating pressure (MOP) function. Single and industrial pack quantities are available. DANFOSS TYPE TDE & TDEB (R22) TEV05 IDENTIFICATION Essential valve data is given on the element label. TDEX = Type (X: refrigerant R 22) 8 TR = Rated capacity Qnom..in Tons of Refrigeration 28 kW = Rated capacity Qnom. in kW R 22 = Refrigerant –25/+10 °C = Evaporating temperature range (°C) –15/+50 °F = Evaporating temperature range (°F) 068H4112 = Code number BP 15 = Bleed 15% MOP 100 = Max. Operation Pressure PB 28 bar/ MWP 400 psig = Max. working pressure 288 = Date marking (week 28, 1998) DIMENSIONS and WEIGHT Type TDE 3-7.5 TDEB 8 - 19 TDEB 20 – 40- Connection ODF solder inlet x outlet Capillary Tube length H1 H2 H3 H4 L1 L2 L3 L4 L5 In. ft In. In. In. In. In. In. In. In. In. In. In. lbs 3/8 × 5/8 5 2.78 2.54 2.93 4.61 1.61 1.73 1.52 2.44 0.20 1.77 0.55 0.90 1/2 × 5/8 5 2.78 2.54 2.93 4.61 1.63 1.73 1.52 2.44 0.20 1.77 0.55 0.90 1/2 × 7/8 5 2.78 2.54 2.93 4.61 1.63 2.32 1.52 2.44 0.20 1.77 0.55 0.90 5/8 × 7/8 5 2.78 2.54 2.93 4.61 1.73 2.32 1.52 2.44 0.20 1.77 0.55 0.90 5/8 × 7/8 5 3.35 3.07 3.58 5.39 1.83 2.42 1.61 2.44 0.28 2.09 0.55 1.30 5/8 × 1-1/8 5 3.35 3.07 3.58 5.39 1.83 2.62 1.61 2.44 0.28 2.09 0.55 1.30 7/8 × 1-1/8 5 3.35 3.07 3.58 5.39 2.42 2.62 1.61 2.44 0.28 2.09 0.55 1.30 7/8 × 1-1/8 10 4.31 3.64 4.31 6.69 2.50 2.70 1.71 4.96 0.39 2.36 0.75 2.40 7/8 × 1-3/8 10 4.31 3.64 4.31 6.69 2.50 2.89 1.71 4.96 0.39 2.36 0.75 2.40 1-1/8 × 1-3/8 10 4.31 3.64 4.31 6.69 2.70 2.89 1.71 4.96 0.39 2.36 0.75 2.40 K-17 ØD1 ØD2 Weight a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 39 Port Type TDEX 3 - 7.5 Single port TDEX 3 - 7.5 Single port TDEX 3 - 7.5 Single port TDEX 3 - 7.5 Single port TDEX 3 - 7.5 Single port TDEX 3 - 7.5 Single port TDEX 3 - 7.5 Single port TDEBX 20 - 40 Balanced port TDEBX 20 - 40 Balanced port TDEBX 20 - 40 Balanced port TDEBX 20 - 40 Balanced port TDEBX 20 - 40 Balanced port TDEBX 8 - 19 Balanced port TDEBX 8 - 19 Balanced port TDEBX 8 - 19 Balanced port TDEBX 8 - 19 Balanced port TDEBX 8 - 19 Balanced port TDEBX 8 - 19 Balanced port TDEBX 8 - 19 Balanced port TDEBX 8 - 19 Balanced port Type and rated capacity*TR TDEX 3 TDEX 3 TDEX 4 TDEX 6 TDEX 6 TDEX 6 TDEX 7.5 TDEBX 20 TDEBX 26 TDEBX 30 TDEBX 30 TDEBX 40 TDEBX 8 TDEBX 11 TDEBX 11 TDEBX 12.5 TDEBX 12.5 TDEBX 16 TDEBX 16 TDEBX 19 * The rated capacity is based on: Evaporating temperature te = 40°F Liquid temperature tl = 80°F Condensing temperature tc = 90°F K-18 Connection solder ODF x ODF in 3/8 x 5/8 1/2 x 5/8 1/2 x 7/8 1/2 x 5/8 1/2 x 7/8 5/8 x 7/8 5/8 x 7/8 7/8 x 1 1/8 7/8 x 1 3/8 7/8 x 1 3/8 1 1/8 x 1 3/8 1 1/8 x 1 3/8 5/8 x 7/8 5/8 x 7/8 5/8 x 1 1/8 5/8 x 7/8 5/8 x 1 1/8 5/8 x 1 1/8 7/8 x 1 1/8 7/8 x 1 1/8 Part No 068H6100 068H6101 068H6102 068H6134 068H6103 068H6104 068H6105 068H7116 068H7118 068H7120 068H7122 068H7124 068H7100 068H7102 068H7104 068H7106 068H7108 068H7110 068H7112 068H7114 Motors Electrical Heating Components Indoor Air Quality Thermostats Range AC = 15 to 60°F with MOP 120 psig. Oils & Chemicals Ordering-II Part No 068H6200 068H6201 068H6202 068H6234 068H6203 068H6204 068H6205 068H7146 068H7148 068H7150 068H7152 068H7154 068H7130 068H7132 068H7134 068H7136 068H7138 068H7140 068H7142 068H7144 Accessories, Supplies & Commodities Port Type Type and rated capacity*TR Connection solder ODF x ODF in TDEX 3 - 7.5 Single port TDEX 3 3/8 x 5/8 TDEX 3 - 7.5 Single port TDEX 3 1/2 x 5/8 TDEX 3 - 7.5 Single port TDEX 4 1/2 x 7/8 TDEX 3 - 7.5 Single port TDEX 6 1/2 x 5/8 TDEX 3 - 7.5 Single port TDEX 6 1/2 x 7/8 TDEX 3 - 7.5 Single port TDEX 6 5/8 x 7/8 TDEX 3 - 7.5 Single port TDEX 7.5 5/8 x 7/8 TDEBX 20 - 40 Balanced port TDEBX 20 7/8 x 1 1/8 TDEBX 20 - 40 Balanced port TDEBX 26 7/8 x 1 3/8 TDEBX 20 - 40 Balanced port TDEBX 30 7/8 x 1 3/8 TDEBX 20 - 40 Balanced port TDEBX 30 1 1/8 x 1 3/8 TDEBX 20 - 40 Balanced port TDEBX 40 1 1/8 x 1 3/8 TDEBX 8 - 19 Balanced port TDEBX 8 5/8 x 7/8 TDEBX 8 - 19 Balanced port TDEBX 11 5/8 x 7/8 TDEBX 8 - 19 Balanced port TDEBX 11 5/8 x 1 1/8 TDEBX 8 - 19 Balanced port TDEBX 12.5 5/8 x 7/8 TDEBX 8 - 19 Balanced port TDEBX 12.5 5/8 x 1 1/8 TDEBX 8 - 19 Balanced port TDEBX 16 5/8 x 1 1/8 TDEBX 8 - 19 Balanced port TDEBX 16 7/8 x 1 1/8 TDEBX 8 - 19 Balanced port TDEBX 19 7/8 x 1 1/8 * The rated capacity is based on: Evaporating temperature te = 40°F Liquid temperature tl = 80°F Condensing temperature tc = 90°F Tools & Instruments Ordering-I Range K = –15 to 50°F with MOP 100 psig. Metric conversions 1 psi = 0.07 bar 5/9 (t1°F – 32) = t2°C 1 ton = 3.5 kW 1 in. = 25.4 mm Refrigeration DANFOSS TYPE TDE & TDEB (R22) Compressors, Chillers, Condensers Refrigeration a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 40 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration DANFOSS THERMOSTATIC EXPANSION VALVES DANFOSS TYPE TRE10, TRE20, TRE40, AND TRE80 INTRODUCTION TRE thermostatic expansion valves have been designed and developed for soldering into air-conditioning and refrigeration systems. Their hermetic tight design meets environmental demands for today and the future. They can be used in systems ranging in capacity from 8 to 70 TR (R 22). The TRE design incorporates a forged brass body with the entire power element, including the capillary tube and bulb, fabricated from stainless steel. The straight through bimetal solder connections are formed from deep drawn stainless steel and copper. The valve incorporates a 2-way balanced port orifice making it ideal for biflow operation. External superheat adjustment is a standard feature on all TRE valves. For non-adjustable OEM versions, a setting assembly is available for field retrofit. Contact Danfoss for further information. Two-way balanced port/bi-flow function • superheat unaffected by condensing pressure independent of flow direction • one valve for heat pump service FEATURES Bimetal connections • waterless soldering • quicker installation times • higher productivity Developed for R 410A • R 22, R 134a, R 410A, R 507 and other fluorinated refrigerants Laser-welded power element • longer diaphragm life • high pressure tolerance and working pressure Stainless steel power element, capillary tube and bulb • high corrosion resistance • high strength and vibration resistance • fast installation: self-aligning bulb • secures with one strap • good thermal contact and transmission Valve options Capillary tube length Connections TYPE TRE10 TRE20 TRE40 TRE80 Stainless steel double contact bulb • straightforward and fast installation • good thermal contact and heat transfer Adjustable/non- adjustable version • Setting spindle assembly can be retrofitted to non-adjustable version In addition to the standard program, TRE valves are also available with the following options: Refrigerants - Range - MOP: Contact Danfoss for information regarding different refrigerants and evaporator ranges. Internal bleed: 15% CAPILLARY TUBE LENGTH 3 or 5 ft 3 5 or 10 ft 5 or 10 ft 5 or 10 ft TYPE INLET ODF SOLDER OUTLET ODF SOLDER TRE10 1/2 -5/8 -7/8 in. 1/2 -5/8 -7/8 -1-1/8 in. TRE20 5/8 -7/8 -1-1/8 in. 5/8 -7/8 -1-1/8 -1-3/8 in. TRE40 7/8 -1-1/8 in. 7/8 -1-1/8 -1-3/8 in. TRE80 1-1/8 -1-3/8 in. Equalizing connection 1/4" or 6 mm ODF on all types. Sizes in bold type are standard sizes. 1-1/8 -1-3/8 -1-5/8 in. ORDERING Valve and bulb strap are supplied in mutipack. The numbers supplied are as follows: Overview of product range Refrigerant Type Code 8 -70 R 22 X 8-70 R 22 X 8 -85 R 410A L 8 -85 R 410A L 5 -56 R 134a N 5 -56 R 134a N K: -15 up to +50 N: -40 up to +50 Capacity TR Range MOP K N K N K N 60°F 60°F 60°F K-19 Type TRE 10 TRE 20 TRE 40 TRE 80 Multipack 12 pcs 8 pcs 6 pcs 4 pcs a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 41 R407C, R134a STANDARD PROGRAM RATED TYPE RATED CAPACITY CAPACITY Qnom 1) REFRIGERANT Qnom 1) TR TR R134a TRE10-5N TRE10-7N TRE20-7N TRE20-9N TRE20-11N TRE20-14N TRE20-14N TRE40-14N TRE40-14N TRE40-16N TRE40-16N TRE40-20N TRE40-25N 5 7 7 9 11 14 14 14 14 16 16 20 25 RANGE K CONNECTION ODF –15°/+50°F MOP 60°F –25°/+10°C MOP SOLDER 15°C Inlet Outlet Part No. in. in. 5/8 7/8 067L1003 5/8 7/8 067L1006 5/8 7/8 067L1041 5/8 7/8 067L1045 7/8 1 1/8 067L1050 7/8 1 1/8 067L1053 7/8 1 3/8 067L1054 7/8 1 1/8 067L3043 7/8 1 3/8 067L3044 7/8 1 3/8 -1 1/8 1 3/8 -1 1/8 1 3/8 067L3051 1 1/8 1 3/8 067L3054 K-20 RANGE N – 40°/+50°F – 40°/+10°C Part No. 067L1103 067L1106 067L1141 067L1145 067L1150 067L1153 067L1154 067L3143 067L3144 067L3147 067L3148 067L3151 067L3154 Pressure equalization = 1/4" ODF 1) According to ARI 750 Rated capacities for Range N are based on: Liquid temperature ahead of expansion valve t1 = 100°F Evaporating temperature te = 40°F Pressure drop across valve Δp = 60 psi for R134a Pressure drop across valve Δp = 100 psi for R22, R404A, and R507 Pressure drop across valve Δp = 160 psi for R410A. For connections, refrigerants, capillary tube lengths, etc. outside the standard program, see Valve options. Motors Electrical Heating Components Indoor Air Quality 067L1121 067L1124 067L1175 067L1179 067L1184 067L1187 067L1188 --067L3105 067L3106 067L3109 067L3112 --067L1128 067L1129 067L1130 067L1131 067L1134 067L1135 067L1138 067L1139 067L1191 067L1192 067L1193 067L1194 067L1197 067L1199 067L3115 067L3116 067L3119 067L3124 067L3127 067L3170 067L3173 067L3174 067L3175 067L3178 067L3179 Thermostats INLET (in) OUTLET (in) TRE10-8X 8 5/8 7/8 067L1021 TRE10-10X 10 5/8 7/8 067L1024 TRE20-10X 10 5/8 7/8 067L1075 TRE20-12.5X 12.5 5/8 7/8 067L1079 TRE20-15X 15 7/8 1 1/8 067L1084 TRE20-20X 20 7/8 1 1/8 067L1087 TRE20-20X 20 7/8 1 3/8 067L1088 R22 TRE40-20X 20 7/8 1 1/8 -TRE40-20X 20 7/8 1 3/8 -TRE40-25X 25 7/8 1 3/8 067L3005 TRE40-25X 25 1 1/8 1 3/8 067L3006 TRE40-30X 30 1 1/8 1 3/8 067L3009 TRE40-40X 40 1 1/8 1 3/8 067L3012 TRE80-55X 55 1 1/8 1 3/8 067L3063 TRE80-70X 70 1 1/8 1 5/8 -TRE10-8L 8 5/8 5/8 067L1028 TRE10-8L 8 5/8 7/8 067L1029 TRE10-10L 10 5/8 5/8 067L1030 TRE10-10L 10 5/8 7/8 067L1031 TRE10-12.5L 12.5 5/8 5/8 067L1034 TRE10-12.5L 12.5 5/8 7/8 067L1035 TRE10-15L 15 7/8 7/8 067L1038 TRE10-15L 15 7/8 1 1/8 067L1039 TRE20-15L 15 7/8 7/8 067L1091 TRE20-15L 15 7/8 1 1/8 067L1092 TRE20-20L 20 7/8 7/8 067L1093 TRE20-20L 20 7/8 1 1/8 067L1094 R410A TRE20-25L 25 7/8 1 1/8 067L1097 TRE20-25L 25 1 1/8 1 1/8 -TRE40-25L 25 7/8 1 1/8 067L3015 TRE40-25L 25 1 1/8 1 3/8 067L3016 TRE40-30L 30 1 1/8 1 3/8 067L3019 TRE40-40L 40 1 1/8 1 3/8 067L3024 TRE40-55L 55 1 1/8 1 1/8 -TRE80-55L 55 1 1/8 1 3/8 067L3070 TRE80-80L 80 1 1/8 1 3/8 067L3073 TRE80-80L 80 1 1/8 1 5/8 067L3074 TRE80-80L 80 1 3/8 1 3/8 067L3075 TRE80-100L 100 1 1/8 1 5/8 067L3078 TRE80-100L 100 1 3/8 1 5/8 067L3079 Pressure equalization = 1/4" ODF 1) The rated capacity is based on ARI Standard 750-97 For connections, refrigerants, capillary tube lengths, etc. outside the standard program, see Valve options. Oils & Chemicals K –15°/+50°F MOP 60F–25°/+10°C N –40°/+50°F–40°/+10°C MOP 15°C Part No Part No Accessories, Supplies & Commodities REFRIGERANT CONNECTION ODF SOLDER Tools & Instruments RANGE TYPE RATED CA- RATED CAPACITY Qnom 1) PACITY TR Qnom 1) TR Refrigeration DANFOSS THERMOSTATIC EXPANSION VALVES DANFOSS TYPE TRE10, TRE20, TRE40, AND TRE80 Ordering R22, R410A Compressors, Chillers, Condensers Refrigeration Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 42 Refrigeration DANFOSS THERMOSTATIC EXPANSION VALVES DANFOSS TYPE TRE10, TRE20, TRE40, AND TRE80 Ordering K-21 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 43 Ordering-II Separate valve bodies, normally open (NO) TYPE EVR 6 EVR 10 EVR 15 Rated capacity R22 (liquid) tons 5.8 13.8 18.9 Connection in Port size in 3/8 1/2 5/8 1/4 3/8 9/16 Coils, see next page. K-22 Cv value gal/min Solder ODF in 0.93 032F1164 2.20 032F1169 3.00 032F1174 Motors Electrical Heating Components Indoor Air Quality Thermostats Rated capacity Connection in Port size in R22 (liquid) tons EVR 2 1.17 1/4 3/32 EVR 3 2.03 1/4 1/8 EVR 3 2.03 3/8 1/8 EVR 4 4.15 3/8 5/32 EVR 4 4.15 1/2 5/32 EVR 6 5.83 3/8 15/64 EVR 6 5.83 1/2 15/64 EVR 6 5.83 5/8 15/64 EVR 6 5.83 5/8 15/64 EVR 8 8.01 3/8 9/32 EVR 8 8.01 1/2 9/32 EVR 8 8.01 5/8 9/32 EVR 10 13.8 3/8 3/8 EVR 10 13.8 1/2 3/8 EVR 10 13.8 5/8 3/8 EVR 15 18.9 5/8 9/16 EVR 15 18.9 7/8 1/4 EVR 18 24.6 7/8 19/32 EVR 18 24.6 1 1/8 19/32 EVR 20 36.4 7/8 7/8 EVR 20 36.4 1 1/8 7/8 EVR 22 43.7 1 1/8 9/16 EVR 22 43.7 1 3/8 9/16 EVR 25 72.8 1 1/8 1 EVR 25 72.8 1 3/8 1 EVR 32 116.5 1 5/8 7/8 EVR 40 182.0 1 5/8 1 EVR 40 182.0 2 1/8 1 EVR 40 182.0 2 1/8 1 Metric conversions 1 ton = 3.5 kW 1 psi = 0.07 bars 1 in. = 25.4 mm 5/9 (t1°F–32) = t2°C US gal/min = 8.6 m3/h Oils & Chemicals TYPE Part no.Valve body without coil type Part no.Valve body without coil type SolFlare der ODF With manual With manual Cv value Without manual Without manual stem stem operation stem operation gal/min stem operation in. operation in in. in. 0.19 -032F8058 -032F7100 0.32 -032F8106 -032F7105 0.32 -032F8115 -032F1157 0.66 -032F8087 -032F7110 0.66 -032F8089 -032F7111 0.93 032F1185 032F8071 032F7116 032F7115 0.93 -032F8078 -032F1162 0.93 ---032F7117 0.93 ---032F7117 1.30 ---032F7120 1.30 -032F7123 -032F7121 1.30 ---032F7122 2.20 ---032F7125 2.20 032F1187 032F1165 032F1188 032F1166 2.20 ---032F1168 3.00 --032F1172 032F1171 3.00 ---032F7130 3.90 --032F1004 032F7135 3.90 ----5.80 --032F1177 032F1176 5.80 --032F2272 032F1178 6.90 ---032F7145 6.90 ---032F7146 12.00 --032F1190 032F1189 12.00 --032F1194 032F1193 18.00 --042H1179 042H1178 29.00 --042H1186 042H1185 29.00 --042H1188 042H1187 29.00 --042H1188 042H1187 Accessories, Supplies & Commodities Ordering Separate valve bodies, normally closed (NC) Tools & Instruments INTRODUCTION EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines using fluorinated refrigerants. EVR valves are supplied as separate components; valve body and coil, if required, can be ordered separately. FEATURES • A complete range of solenoid valves for refrigeration, freezing and air conditioning systems. • Normally closed (NC) and normally open (NO) versions available. • AC and DC coils are interchangeable on all valve body versions. • Use with any fluorinated refrigerant. • Designed for media temperatures up to 220° F. • Flare connections up to 5/8”. • Solder connections up to 2-1/8”. • Solder versions have extended connections; there is no need to Dismantle the valve when soldering. APPROVALS NOTE: These approvals are only recognized when one of the EVR series of solenoid valves found in this leaflet is combined with a GP general purpose coil. • UL listed, file MH 7648. • CSA certified, LR 52727. Refrigeration DANFOSS SOLENOID VALVES DSV01 Compressors, Chillers, Condensers Refrigeration a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 44 DANFOSS TYPE EVR 2 TO 40 - SOLENOID VALVES GENERAL PURPOSE CLICK-ON COIL,TYPE GP INTRODUCTION General purpose Click-on coil, type GP sealed to protect against moisture, Easy click-on mounting system Approvals: Listed EVR MH7648 Motors Compressors, Chillers, Condensers Refrigeration Conformity with LV D 73/23/EC with amendments EN 60730-2-8 TECHNICAL DATA Electrical Design Power supply Permissible voltage variation Power consumption Heating Components Insulation of coil wire Connection Enclosure, IEC 529 Ambient temperature Cross reference list - GP Coils Old Part No. New Part No. 018Z7613 018F7683 018Z7612 018F7682 018Z7611 018F7681 018Z7603 018F7689 018Z7623 018F7693 018Z7622 018F7692 018Z7621 018F7691 018Z7625 018F7699 Indoor Air Quality Thermostats In accordance with UL 429 Alternating current (a.c) and direct current (d.c) Alternating current (a.c) : +10 to – 15% Direct current (d.c) : +10 to -10 Alternating current (a.c) : Inrush; 49 VA; Holding; 28VA,14W Direct current (d.c) ; 20 W Class H according to IEC 85 Junction box or Conduit boss Junction box NEMA 2 0- IP 12-32 Conduit boss NEMA 4 – IP 54 -40 to 140o F (-40 to + 50oC) Ordering Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Alternating Current(a.c) Valve Type Voltage V Frequency Hz EVR 24 50/60 EVM 110 50/60 EVRA/T 120 60 EVRS/T 208-240 60 AKV/A 230 50 Conduit Boss NEMA 4 018F7683 018F7693 018F7682 018F7692 018F7681 018F7691 Power Consumption Holding: 14W 20 VA Inrush: 49 V Direct Current (d.c) PART NO. Valve Type Voltage V 120 Refrigeration PART NO. Junction Box NEMA 2 Frequency Hz Junction Box NEMA 2 018F7689 K-23 Conduit Boss NEMA 4 018F7699 Power Consumption 20W a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 45 DANFOSS SOLENOID VALVES TYPE EVR 2 TO 40 EVR (NC) 2-15 FLARE CONNECTION EVR (NC) 2 – 15 FLARE CONNECTION EVR 6 EVR 10 EVR 15 L in. 2.33 2.33 2.50 2.75 3.00 3.31 3.65 4.10 B in. 1.30 1.30 1.30 1.50 1.50 1.80 1.80 2.25 K-24 Weight with coil lbs. 1.10 1.10 1.10 1.33 1.33 1.77 1.77 2.20 Tools & Instruments EVR 2 EVR 3 Connection Flare in. 1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 Refrigeration Type Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Dimensions and Weights Compressors, Chillers, Condensers Refrigeration a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 46 DANFOSS SOLENOID VALVES TYPE EVR 2 TO 40 EVR (NC) 2-15 FLARE CONNECTION EVR (NC) 2 – 22 SOLDER CONNECTION Dimensions and Weights Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Type EVR 2 EVR 3 EVR 6 EVR 15 EVR 20 EVR 22 L B in. 4.00 4.00 4.50 4.30 5.00 5.00 6.30 7.00 7.00 7.50 8.50 11.00 in. 1.30 1.30 1.30 1.50 1.50 1.80 1.80 2.25 2.25 2.90 2.90 2.90 Refrigeration Tools & Instruments Accessories, Supplies & Commodities EVR 10 Connection Solder in. 1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 7/8 7/8 1-1/8 1-3/8 K-25 Weight with coil lbs. 1.10 1.30 1.30 1.30 1.30 1.60 1.60 2.20 2.20 3.30 3.30 3.30 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 47 DANFOSS SOLENOID VALVES TYPE EVR 2 TO 40 EVR (NC) 2-15 FLARE CONNECTION EVR (NC) 25 – 40 SOLDER CONNECTION EVR 32 EVR 40 L B in. 10.00 11.00 11.00 11.00 11.00 11.00 in. 3.75 3.75 3.15 3.15 3.15 3.15 Weight with coil lbs. 28.75 29.35 32.00 32.25 32.25 32.25 K-26 Tools & Instruments EVR 25 Connection Solder in. 1-1/8 1-3/8 1-3/8 1-5/8 1-5/8 2-1/8 Refrigeration Type Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Dimensions and Weights Compressors, Chillers, Condensers Refrigeration a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 48 DANFOSS SOLENOID VALVES TYPE EVR 2 TO 40 EVR (NC) 2-15 FLARE CONNECTION EVR (NC) 6 – 22 FLARE CONNECTION Dimensions and Weights Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Type EVR 6 EVR 10 EVR 15 Type EVR 6 EVR 10 EVR 15 EVR 20 EVR 22 L in. 2.72 3.31 4.10 B in. 1.50 1.80 2.25 Weight with coil lbs. 1.33 1.60 2.00 L in. 4.30 5.00 7.00 7.50 11.00 B in. 1.50 1.80 2.25 2.90 2.90 Weight with coil lbs. 1.33 1.60 2.00 3.30 3.30 1) Applies to 7/8 in. connections. For 1-1/8 in. connections, L=8.43 in. K-27 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 49 Refrigeration Compressors, Chillers, Condensers DANFOSS EVAPORATOR PRESSURE REGULATORS ORDERING INTRODUCTION Electrical Motors KVP evaporator pressure regulators are mounted in the suction line of refrigeration and air conditioning systems. They are used to maintain a constant pressure corresponding to a constant temperature on the evaporator. They also protect against too low an evaporating pressure by throttling down when pressure falls below the set value. They are also used to differentiate the evaporating pressures in two or more evaporators in systems with one compressor. APPROVALS KVP 12 KVP 15 KVP 22 KVP 28 KVP 35 1.3 1.3 1.3 2.8 2.8 0.9 0.9 0.9 1.9 1.9 1.2 1.2 1.2 2.4 2.4 in FLARE CONNECTION† Part No 1/2 5/8 ---- 034L0021 034L0022 ---- SOLDER CONNECTION Part No 034L0023 034L0029 034L0025 034L0026 034L0032 in ODF 1/2 5/8 7/8 1-1/8 1-3/8 *Rated capacity is based on: Evaporating temperature te = 40° F Condensing temperature tc = 100° F Pressure drop across regulator p = 2 psi Offset (design evaporating pressure minus minimum allowable evaporator pressure) = 9 psi. †KVP supplied without flare nuts. Tools & Instruments NOTE: The connection dimensions chosen must not be too small, as gas velocities in excess of 130 ft/s at the inlet of the regulator can result in flow noise. Oils & Chemicals R22 K-28 Refrigeration TYPE Accessories, Supplies & Commodities ORDERING RATED CAPACITY*(Tons) R134a R404A/R507 Thermostats Indoor Air Quality Heating Components UL listed, file SA7200. CSA approved. a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 50 DANFOSS EVAPORATOR PRESSURE REGULATORS CONDENSER PRESSURE REGULATORS Ordering Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration ORDERING TYPE KVR 12 KVR 15 KVR 22 KVR 28 KVR 35 Rated Liquid Capacity1) Rated Hot Gas1) (Evaporator Capacity) tons (Evaporator Capacity) tons R22 R134a R404A/R507 R22 R134a R404A/R507 12.7 12.7 12.7 32.6 32.6 11.8 11.8 11.8 30.2 30.2 8.2 8.2 8.2 20.9 20.9 4.13 4.13 4.13 10.93 10.93 3.03 3.03 3.03 8.04 8.04 3.27 3.27 3.27 8.66 8.66 1) Rated capacity is based on: Evaporating temperature te = 40° F Condensing temperature tc = 100° F Pressure drop across valve p = 3 psi for liquid capacity p = 3 psi for hot gas capacity Refrigeration Flare Connection2) SOLDER CONNECTION in. Part No in. 1/2 5/8 ---- 034L0091 034L0091 ---- 1/2 5/8 7/8 1 1/8 1 3/8 2) KVR are delivered without flare nuts. NOTE: The connection dimensions chosen must not be too small, as gas velocities in excess of 130 ft/s at the inlet of the regulator can result in flow noise. Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality KVR condenser regulators can be mounted in either the gas or liquid side of the condenser in refrigeration and air conditioning systems. They are used to maintain a constant and sufficiently high condensing pressure with systems using air-cooled condensers. They can also be used with valve types NRD or KVD to assure that adequate pressure is maintained on the receiver. K-29 Part No 034L0093 034L0097 034L0094 034L0095 034L0100 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 51 DANFOSS HOT GAS BYPASS CAPACITY REGULATORS ORDERING INTRODUCTION Motors KVC capacity regulators are used to adapt compressor capacity to actual evaporator load by supplying a replacement capacity in form of hot/cool gas.It is installed in a bypass line between the high and low pressure sides of the refrigeration system and is designed for direct gas injection into the suction line. Compressors, Chillers, Condensers Refrigeration Approvals. 2.14 4.17 5.35 1.36 2.65 3.41 2.02 3.93 5.04 in FLARE CONNECTION† PART NO 1/2 5/8 -- 034L0141 034L0142 -- *Rated capacity is based on: Suction gas temperature ts = 10° F Liquid temperature tl = 100° F p = 10 psi Offset †KVC are delivered without flare nuts. NOTE: The connection dimensions chosen must not be too small, as gas velocities in excess of 130 ft/s at the inlet of the regulator can result in flow noise. If the temperature in the discharge gas line is too high according to the compressor specifications, it is recommended to install a liquid injection valve in a bypass from the liquid line to the suction line. 1/2 5/8 7/8 PART NO 034L0143 034L0147 034L0144 Tools & Instruments • For CFC, HCFC, and HFC Refrigerants • Regulating range: 3 to 85 PSIG. Factory setting -29 psig. SOLDER CONNECTION in ODF Thermostats KVC 12 KVC 15 KVC 22 RATED CAPACITY*(Tons) R134a R404A/R507 Oils & Chemicals R22 K-30 Refrigeration TYPE Accessories, Supplies & Commodities ORDERING Indoor Air Quality Heating Components Electrical UL listed, file SA7200. CSA approved a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 52 DANFOSS HOT GAS BYPASS CAPACITY REGULATORS TYPE CPCE/LG (LIQUID-GAS MIXERS) INTRODUCTION CPCE capacity regulators are used to adapt compressor capacity to actual evaporator load. They are installed in a bypass line between the high and low pressure sides of the refrigeration system and is designed for hot gas injection into the evaporator just after the expansion valve. Liquidgas mixer type LG can be used at the point of injection to assure a proper mixture TYPE EXPANSION VALVE (in) ODM CONNECTION FOR HOT-GAS (in) ODM LIQUID DISTRIBUTOR in) ODF PART NO 5/8 7/8 1 1/8 1 3/8 1/2 1/2 5/8 7/8 5/8 7/8 1 1/8 1 3/8 069G4001 069G4002 069G4003 069G4004 R22 RATED CAPACITY1) tons R134a R404A/R507 PART NO 6.2 6.2 9.2 12.2 4.3 4.3 6.3 8.4 6.3 6.3 9.1 12.1 034N0081 034N0082 034N0083 034N0084 LG 12/16 LG 12/22 LG 16/28 LG 22/35 Ordering Capacity regulator (Hot Gas capacity valve) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration TYPE CPCE 12 CPCE 12 CPCE 15 CPCE 22 Flare in 1/2 ---- CONNECTION SOLDER-ODF in -1/2 5/8 7/8 1) Rated capacity is based on: Minimum suction temperature ts = 15° F Condensing temperature tc = 100° F Superheat of expansion valve ǻ ts = 7° F • Provides protection against too low an evaporator temperature. • For use with CFC, HCFC, and HFC Refrigerants K-31 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 53 DCPR01 INTRODUCTION KVL crankcase pressure regulators are used to protect the compressor motor against overload experienced during startup after long off periods or just after defrost periods.They are installed in the suction line of refrigeration systems. • For use with CFC,HCFC and HFC Refrigerants • Refrigerants Range 3 to 85 PSIG (Factory Setting = 25 PSIG) APPROVALS Motors DANFOSS CRANKCASE PRESSURE REGULATORS Compressors, Chillers, Condensers Refrigeration Heating Components Electrical C US listed, file SA7200. CSA approved. TYPE KVL Metric conversions 1 psi = 0.07 bar 5/9 (t1°F – 32) = t2°C 1 ton = 3.5 kW 1 in. = 25.4 mm 0.22 0.22 0.22 0.74 0.74 in. Flare Connection2) PART NO 0.28 0.28 0.28 0.96 0.96 1/2 5/8 ---- 034L0041 034L0042 ---- 1) Rated capacity is based on: Maximum suction pressure Suction temperature Condensing temperature Press. drop across regulator Solder Connection in. PART NO 1/2 5/8 7/8 1 1/8 1 3/8 034L0043 034L0049 034L0045 034L0046 034L0052 ps = 70 psig ts = 10° F tc = 100° F = 2 psi Note: The connection dimensions chosen must not be too small, as gas velocities in excess of 130 ft/s at the inlet of the regulator can result in flow noise. Oils & Chemicals 0.34 0.34 0.34 1.60 1.60 R404A/R507 Accessories, Supplies & Commodities KVL 12 KVL 15 KVL 22 KVL 28 KVL 35 Rated Capacity1) TR R134a Tools & Instruments R22 K-32 Refrigeration TYPE Thermostats Indoor Air Quality Ordering a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 54 DANFOSS RECEIVER PRESSURE REGULATORS TYPE KVD INTRODUCTION KVD is a modulating pressure regulator. It opens on falling receiver pressure and bypasses hot gas to maintain the receiver pressure at the regulator setting (adjustable). KVD and KVR form a regulating system, used to maintain constant and adequately high condensing and receiver pressure in systems with heat-recovery, and in refrigeration and air conditioning systems with air-cooled condensers. • For use with CFC, HCFC and HFC Refrigerants. • Regulating range 45 to 290 PSIG (Factory setting = 145 PSIG.) Ordering Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Flare connection1) Solder connection Type in. PART NO in. PART NO KVD 12 KVD 15 1/2 5/8 034L0171 034L0172 1/2 5/8 034L0173 034L0177 1) KVD supplied without flare nuts. The size of connection must not be chosen too small since gas velocities of more than 40 m/s in the inlet can cause flow noise. K-33 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 55 DANFOSS REFRIGEATION THERMOSTATS, TYPE KPU K-34 Heating Components Refrigeration Tools & Instruments Accessories, Supplies & Commodities Regulating ranges in °F Indoor Air Quality Ambient Temperature Contact Load –40 to 122°F, 175°F up to 2 hours. Alternating current Cable Entry FLA = 24 A @ 120 Vac 24 A @ 240 Vac 7/8” cable entry for ½” male pipe thread LRA = 144 A @ 120 Vac 144 A @ 240 Vac Direct Current connection (conduit boss) Maximum Wire Dimension 12 W pilot duty @ 240 Vdc Alternating Current (acc. to EN 60947) 10 AWG Enclosure AC1: 16 A, 400 VA AC3: 16 A, 400 VA AC15: 10 A, 400V NEMA 1 Switch Direct Current SPDT - single pole double throw DC 13: 12 W, 220 V control current Thermostats FEATURES • Wide temperature regulating range allows use in low, medium, and high temperature refrigeration application and air-conditioning systems • SPDT switch allows NC or NO function option as well as alarm capability • Automatic and manual reset versions available Approvals UL listed for USA and Canada, file E31024 TECHNICAL DATA Oils & Chemicals INTRODUCTION KPU thermostats are temperature-controlled electrical switches, which are applied for regulation and safety monitoring of refrigeration and air conditioning systems. KPU sensors are available with vapor charge or with adsorption charge. Thermostats with adsorption charge are widely used to give frost protection, while vapor charged sensors are used where small differential is required. All KPU temperature controls have a single pole double throw (SPDT) contact system. The position of the switch depends on the thermostat setting and the bulb temperature. Electrical Motors DT-TKPU Compressors, Chillers, Condensers Refrigeration a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 56 DANFOSS PRESSURE CONTROLS, TYPE KPU Pressure controls for fluorinated refrigerant Ordering PRESSURE Control type Low Low Low Low Low Fan cycling Dual Dual KPU 1 KPU 1 KPU 1 KPU 2 KPU 2 KPU 5 KPU 15 KPU 15 Low pressure (LP) Range psig Differential psi 6 to 108 6 to 108 28 to 100 6 to 73 6 to 73 -6 to 108 6 to 108 10 to 60 10 to 60 10 fixed 6 to 30 6 to 30 -10 to 60 10 to 60 High pressure (HP) RESET PART NO Range psig Differential psi Low Pressure High Pressure Contact 1/4" male flare 36" cap Tube w 1/4" LP HP type flare nut --Auto -A 060-5231 060-5233 --Auto -B 060-5236 ---Man. -A 060-5232 060-5234 --Auto -B 060-5237 060-5235 --Auto -A 060-5239 060-5240 100 to 465 25 to 85 -Auto B 060-5241 060-5242 100 to 465 60 fixed Auto Auto C 060-5247 060-5248 100 to 465 60 fixed Auto Man. C 060-5249 060-5250 DANFOSS OIL DIFFERENTIAL PRESSURE CONTROLS DODPC01 INTRODUCTION MP54 and MP55 oil differential pressure controls are used as safety switches to protect refrigeration compressors against low lubricating oil pressure. If the oil pressure fails, the control will stop the compressor after a predetermined time period has elapsed.MP54 and 55 are used in refrigerating systems using CFC, HCFC, HFC MP 54 has a fixed differential pressure setting. It also incorporates a thermal time relay with a fixed release time setting. MP55 have adjustable differential pressure and are available with thermal time relay. APPROVALS • UL listed, file E31024. • CSA certified, LRA 6093. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-35 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 57 DIFFERENTIAL RANGE (PSI) TIME DELAY (SEC) 060B200866 060B205066 060B205866 060B205966 060B210966 060B200166 060B205166 060B200266 060B200366 060B205366 060B215066 060B205466 060B201266 060B200666 060B205666 060B200766 060B205766 MP54 MP54 MP54 MP54 MP54 MP54 MP54 MP54 MP54 MP54 MP54 MP55 MP55 MP55 MP55 MP55 MP55 Fixed 6.0 Fixed 6.0 Fixed 6.0 Fixed 6.0 Fixed 6.0 Fixed 9.0 Fixed 9.0 Fixed 9.0 Fixed 9.0 Fixed 9.0 Fixed 13 4.3 to 64 4.3 to 64 4.3 to 64 4.3 to 64 4.3 to 64 4.3 to 64 45 45 60 60 120 60 60 90 120 120 45 45 60 90 90 120 120 REGULATION RANGE LP SIDE IN HG TO PSIG) 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 29 in. to 170 PRESSURE CONNECTION 1/4 in Flare 36 in Capillary 88 in Capillary Tube Tube Yes --Yes Yes -Yes Yes -Yes -Yes Yes -Yes -- -Yes -Yes --Yes --Yes -Yes --Yes -Yes --Yes --------------- Motors TYPE K-36 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality PART NO Electrical ORDERING Heating Components DANFOSS OIL DIFFERENTIAL PRESSURE CONTROLS Compressors, Chillers, Condensers Refrigeration a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 58 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration DANFOSS SIGHT GLASSES DSG01 INTRODUCTION Sight glasses are used to indicate: 1. The condition of the refrigerant in the plant liquid line. 2. The moisture content in the refrigerant. 3. The flow in the oil return line from the oil separator. The SGI, SGN, SGR or SGRN can be used for CFC, HCFC and HFC refrigerants. The SGI and SGN are fitted with an indicator which changes color to show the moisture content in the refrigerant. The SGR is used to indicate the liquid level in a receiver or the oil level in a compressor crankcase. The SGRN is a sight glass like SGR, but supplied with a moisture indicator. The moisture indicators in the sight glasses are dirt repelling. APPROVALS UL listed, file SA 652. CSA Certified, LR 55874. TECHNICAL DATA Refrigerants: SGI/SGRI: CFC SGN/SGRN: HFC and HCFC Ambient Temperature: 175° F -60° F Maximum Working Pressure: 12: MWP = 500 psig SGI/SGN: 6 SGI/SGN: 16s (solder): MWP = 500 psig SGI/SGN: 16 (flare): MWP = 400 psig 22: MWP = 400 psig SGI/SGN 19 SGR/SGRI/SGRN: MWP = 500 psig DANFOSS SIGHT GLASSES, TYPES SGI, SGN, SGR, AND SGRN Ordering SGI = CFC refrigerants SGN = HFC, HCFC refrigerants PART NO TYPE VERSION Connection in LENGTH (IN) 014-0060 014-0061 014-0009 014-0024 SGI 6 SGI 10 SGI 12 SGI 16 Flare ext. × ext. Flare ext. × ext. Flare ext. × ext. Flare ext. × ext. 1/4 × 1/4 3/8 × 3/8 1/2 × 1/2 5/8 × 5/8 2.65 3.25 3.5 4.1 PART NO TYPE VERSION Connection in LENGTH (IN) 014-0063 014-0064 014-0065 SGI 6 SGI 10 SGI 12 Flare int. × ext. 1) Flare int. × ext. 1) Flare int. × ext. 1) 1/4 × 1/4 3/8 × 3/8 1/2 × 1/2 1.8 2.25 2.33 PART NO TYPE VERSION Connection in LENGTH (IN) 014-0066 014-0067 014-0068 014-0069 014-0070 SGI 6s SGI 10s SGI 12s SGI 16s SGI 22s ODF × ODF solder ODF × ODF solder ODF × ODF solder ODF × ODF solder ODF × ODF solder 1/4 × 1/4 3/8 × 3/8 1/2 × 1/2 5/8 × 5/8 7/8 × 7/8 4 4.7 5.75 5.75 6.82 K-37 WEIGHT (LB) 0.25 0.5 0.75 1 WEIGHT (LB) 0.25 0.5 0.75 WEIGHT (LB) 0.25 0.25 0.5 0.5 0.5 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 59 KPU 61 KPU 61 KPU 61 KPU 61 KPU 61 KPU 62 KPU 61 KPU 63 KPU 63 KPU 68 KPU 69 KPU 62 KPU 73 KPU 73 KPU 73 KPU 73 KPU 71 KPU 71 KPU 74 KPU 74 KPU 75 KPU 75 KPU 77 A A B B B C1 B A B C1 B C2 E3 E1 E3 D E2 E2 E1 E1 F E2 E3 í20 to 60 í20 to 60 í20 to 60 í20 to 60 í20 to 60 í20 to 60 í20 to 60 í60 to 15 í60 to 15 25 to 95 25 to 95 í20 to 60 í15 to 60 í15 to 60 í15 to 60 í15 to 60 25 to 70 25 to 70 0 to 80 0 to 80 30 to 95 30 to 95 60 to 140 DANFOSS SIGHT GLASSES, TYPES SGI, SGN, SGR, AND SGRN Ordering PART NO TYPE VERSION Connection in LENGTH (IN) 014-0119 SGI 10s ODF × ODM solder 3/8 × 3/8 4 PART NO TYPE VERSION Connection in LENGTH (IN) 014-0131 SGR 1/2 NPT 1/2 NPT -- PART NO TYPE VERSION Connection in LENGTH (IN) 014-0132 014-0133 SGN 6 SGN 10 Flare ext. × ext. Flare ext. × ext. 1/4 × 1/4 3/8 × 3/8 2.65 3.25 PART NO TYPE VERSION Connection in LENGTH (IN) 014-0137 014-0138 014-0139 SGN 6 SGN 10 SGN 12 Flare int. × ext. 1) Flare int. × ext. 1) Flare int. × ext. 1) 1/4 × 1/4 3/8 × 3/8 1/2 × 1/2 2.25 2.33 2.8 PART NO TYPE VERSION Connection in LENGTH (IN) 014-0142 014-0143 014-0144 014-0145 014-0147 SGN 6s SGN 10s SGN 12s SGN 16s SGN 22s ODF × ODF solder ODF × ODF solder ODF × ODF solder ODF × ODF solder ODF × ODF solder 1/4 × 1/4 3/8 × 3/8 1/2 × 1/2 5/8 × 5/8 7/8 × 7/8 3 4 4.7 5.75 6.82 TYPE VERSION Connection in LENGTH (IN) SGN 10s SGH 10s SGH 22s SGH 22s SGN 16s SGH 12s ODF × ODM solder ODF × ODF solder ODF × ODF solder ODF × ODF solder ODF × ODM solder ODF × ODF solder 3/8 × 3/8 3/8 × 3/8 7/8 x 7/8 1-1/8 x 1-1/8 5/8 × 5/8 1/2 x 1/2 4.7 ---5.75 -- PART NO 014-0152 014-1092 (R410A) 014-1096 (R410A) 014-1098 (R410A) 014-0154 014-1091 (R410A) K-38 Motors Vapour (1) Vapour (1) Vapour (1) Vapour (1) Vapour (1) Vapour (1) Vapour (1) Vapour (1) Vapour (1) Vapour (1) Vapour (1) Adsorption (2) Adsorption (2) Adsorption (2) Adsorption (2) Adsorption (2) Adsorption (2) Adsorption (2) Adsorption (2) Adsorption (2) Adsorption (2) Adsorption (2) Adsorption (2) Capillary tube Max bulb temp [°F] length [in] 80 250 200 250 80 250 80 250 200 250 room sensor 250 80 250 80 250 80 250 room sensor 250 80 250 room sensor 175 80 175 80 175 80 175 80 175 80 175 80 175 80 175 80 175 80 230 80 230 80 265 Indoor Air Quality 060L5201 060L5202 060L5203 060L5204 060L5205 060L5206 060L5210 060L5213 060L5214 060L5215 060L5217 060L5207 060L5208 060L5209 060L5211 060L5212 060L5218 060L5216 060L5219 060L5220 060L5221 060L5222 060L5223 DIFFERENTIAL At Lowest Temperature Highest Temperature Reset function Setting °F Setting °F 8 to 40 2.5 to 13 auto. 8 to 40 2.5 to 13 auto. 8 to 40 2.5 to 13 auto. fixed 10 fixed 3.5 man. (3) fixed 10 fixed 3.5 man. (3) 8 to 40 2.5 to 13 auto. 8 to 40 2.5 to 13 auto. (4) 18 to 125 5 to 15 auto. 18 to 125 5 to 15 auto. 8 to 45 3 to 13 auto. 8 to 45 3 to 13 auto. 9 to 36 3 to 14 auto. (4) 6 to 18 5 to 50 auto. 22 to 125 15 to 45 auto. fixed 6 fixed 6 man. (3) 6 to 35 5 to 32 auto. 5.5 to 18 4 to 6 auto. fixed 5 fixed 5 man. (3) 9 to 35 9 to 35 auto. fixed 10 fixed 10 man. (3) 6 to 29 4.5 to 21.5 auto. 6 to 30 4.5 to 22 auto. 6 to 18 6.3 to 18 auto. WEIGHT (LB) 0.25 WEIGHT (LB) -WEIGHT (LB) 0.25 0.5 WEIGHT (LB) 0.5 0.75 1 WEIGHT (LB) 1.33 0.25 0.25 0.5 0.5 WEIGHT (LB) 0.25 ---0.5 -- Thermostats Range [°F] Oils & Chemicals BULB TYPE Accessories, Supplies & Commodities TYPE Tools & Instruments CHARGE Refrigeration PART NO Electrical ORDERING Heating Components DANFOSS REFRIGEATION THERMOSTATS, TYPE KPU Compressors, Chillers, Condensers Refrigeration a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 60 Motors Compressors, Chillers, Condensers Refrigeration DANFOSS SIGHT GLASSES, TYPES SGI, SGN, SGR, AND SGRN Ordering PART NO TYPE VERSION Connection in LENGTH (IN) 014-0006 SGRN NPT 1/2 NPT -- Yellow wet Green dry 77°F Intermed. color > 65 > 230 < 10 10 - 50 > 500 > 430 > 250 > 560 > 280 < 30 < 30 < 20 < 30 < 15 Electrical Refrigerant CFC R12 R502 HCFC R22 R134a R404A R407C R507 Green dry 77°F Intermed. color < 10 < 70 10 - 25 70 - 140 < 150 < 130 < 90 < 170 < 80 150 - 300 130 - 270 90 - 170 170 - 350 80 - 160 SGN 110°F Intermed. color Yellow Green wet dry **SGI recommended > 25 < 35 35 - 65 > 140 < 110 110 - 230 > 300 > 270 > 170 > 350 > 160 < 250 < 210 < 125 < 280 < 140 250 210 125 280 140 - 500 430 250 560 280 Yellow wet Thermostats Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments K-39 Green dry > 50 < 20 **SGN recommended 30 - 120 > 120 < 50 30 - 100 > 100 < 45 20 - 70 > 70 < 25 30 - 140 > 140 < 60 15 - 60 > 60 < 30 This chart indicates the moisture content in parts per million for both types of Danfoss sight glasses for the given refrigerants. Indoor Air Quality Heating Components -- 1) Can be screwed directly into the filter drier. 2) ISO 228/1. SGI Refrigeration WEIGHT (LB) 110°F Intermed. color Yellow wet 20 - 90 > 90 50 45 25 60 30 - 200 170 100 225 110 > 200 > 170 > 100 > 225 > 110 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 61 Refrigeration Compressors, Chillers, Condensers DANFOSS CHECK VALVES PART NO TYPE Connection in WEIGHT (LB) 020-1040 020-1041 020-1042 020-1043 020-1044 NRV 6 NRV 10 NRV 12 NRV 16 NRV 19 1/4 3/8 1/2 5/8 3/4 0.2 0.4 0.4 0.7 0.9 PRESSURE DROP 2) Cv VALUE 3) gal/min ACROSS VALVE ¨p psi 1 0.65 1 1.65 0.7 2.37 0.7 4.16 0.7 5.78 Heating Components OVERALL LENGTH in 2.21 2.36 2.72 3.15 3.47 NRV / NRVH straightway, solder connection PART NO TYPE Connection in WEIGHT (LB) 020-1010 020-1057 020-1069 020-1011 020-1046 020-1058 020-1070 020-1012 020-1039 020-1052 020-1064 020-1018 020-1038 020-1059 020-1071 020-1019 020-1023 020-1054 020-1066 NRV 6s NRV 6s * NRVH 6s * NRV 10s NRVH 10s NRV 10s NRVH 10s * NRV 12s NRVH 12s NRV 12s * NRVH 12s * NRV 16s NRVH 16s NRV 16s * NRVH 16s * NRV 19s NRVH 19s NRV 19s * NRVH 19s * 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 7/8 7/8 0.2 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.7 0.7 0.7 0.7 0.9 0.9 0.9 0.9 K-40 PRESSURE DROP 2) Cv VALUE 3) gal/min ACROSS VALVE ¨p psi 1.0 0.65 1.0 0.65 1.0 0.65 1.0 1.65 4.3 1.65 1.0 1.65 4.3 1.65 0.7 2.37 4.3 2.37 0.7 2.37 4.3 2.37 0.7 4.16 4.3 4.16 0.7 4.16 4.3 4.16 0.7 5.78 4.3 5.78 0.7 5.78 4.3 5.78 OVERALL LENGTH in 3.62 3.62 3.62 4.29 4.29 4.29 4.29 5.16 5.16 5.16 5.16 5.43 5.43 5.43 5.43 6.50 6.50 6.50 6.50 Oils & Chemicals NRV straightway, flare connection Accessories, Supplies & Commodities Ordering Thermostats Indoor Air Quality Temperature of medium: +285°F -60 Maximum working pressure: MWP = 400 psig Maximum test pressure: p’ = 520 psig Tools & Instruments FEATURES Two Versions available •Type NRV: Requires a minimum P of 0.6 to1psi for 100% flow. •Type NRVH: Includes a stronger spring that requires a minimum P of 4.3 psi for 100% flow. Refrigerants: CFC, HCFC and HFC NRVH check valves can be used in liquid and hot gas lines in refrigeration and air conditioning systems using fluorinated refrigerants. They are supplied with a stronger spring than type NRV ( P = 4.3 psi) and are especially suitable for installation in the discharge line of systems with compressors connected in parallel. Refrigeration INTRODUCTION NRV check valves can be used in liquid, suction, and hot gas lines in refrigeration and air conditioning systems using fluorinated refrigerants. They allow flow in only one direction and have a built-in damping piston that makes the valve suitable for installation in lines where pulsation can occur. They are available in both angleway and straightway versions. Electrical Motors TYPES NRV AND NRVH a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 62 DANFOSS CHECK VALVES TYPES NRV AND NRVH Ordering NRV / NRVH angleway, solder connection PART NO TYPE Connection in WEIGHT (LB) 020-1020 020-1032 020-1060 020-1072 020-1021 020-1029 020-1056 020-1068 020-1026 020-1034 020-1061 020-1073 NRV 22s NRVH 22s NRV 22s * NRVH 22s * NRV 28s NRVH 28s NRV 28s * NRVH 28s * NRV 35s NRVH 35s NRV 35s * NRVH 35s * 7/8 7/8 1 1/8 1 1/8 1 1/8 1 1/8 1 3/8 1 3/8 1 3/8 1 3/8 1 5/8 1 5/8 1.1 1.1 1.1 1.1 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 Thermostats Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments Refrigeration PRESSURE DROP 2) ACROSS VALVE ¨p psi 0.6 4.3 0.6 4.3 0.6 4.3 0.6 4.3 0.6 4.3 0.6 4.3 * Oversize connections 2) p = the minimum pressure at which the valve is completely open. The NRVH with a stronger spring is used in the discharge line from compressors connected in parallel. 3) Cv value is the water flow in gal/min at a pressure drop across valve of 1 psi, ȡ= 10 lb/gal. Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-41 Cv VALUE 3) gal/min Metric Conversions 1 psi = 0.07 bar 1 in. = 25.4 mm US gal/min = 0.86 m3/h 9.83 9.83 9.83 9.83 21.96 21.96 21.96 21.96 33.52 33.52 33.52 33.52 a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 63 DANFOSS-MANEUROP REFRIGERATION HERMETIC CONDENSING UNITS Air Cooled: HCMC/HGMC/HCZC/HGZC/LCHC/LGHC/UCGC/HCGC/UCHC/HCHC Water Cooled: CMW/CMEW/CLW/CLEW 60 Hz Integral • Low pressure control on 1 hp units (OPTIONAL) • Dual pressure control on with universal Auto/ Manual reset on 1.5 hp and above • Self regulating PTC crank case heater on 1.5 hp and above • Versions available for indoor and outdoor applications • Compressor sight glass on 1.5hp and above • Receiver with liquid shut-off, and fuseable plug standard on all units (1.5 HP AND ABOVE) • Durable 12 gauge painted steel base plate • Pre-wired metal electrical box • Cartridge control on 1.5 HP to 3 hp single fan units • Units larger than 3hp use kpu fan cycling control Heating Components Fractional • Base mounted services values with access port • Durable 14 gauge painted steel base plate • Metal fan shroud and guard Indoor Air Quality Advantages • Complete line from 1/6-13.5hp • Units available for R134A, R22, R404A • Easy access service valves on all units • Universal high/medium/low range in R-404A fractional units Thermostats Air Cooled Condensing Units Include: Electrical Motors R-22, R-407C, R-134a, R-404A, R-507, R-502 Compressors, Chillers, Condensers Refrigeration Water Cooled Units High to Medium Temp. R-22 High to Medium Temp. R-134a Med. to Low Temp. R-404A/R-507 Extra Low Temp. R-404A/R-507 Tools & Instruments NOTE: The MANEUROP AIR COOLED CM/CL product line has been replaced by the NEW DANFOSS MODELS . however, we will continue to offer the CM/CL accessories along with the CM/CL WATER COOLED UNITS. K-42 Refrigeration CMW CMEW CMEW CLEW Accessories, Supplies & Commodities • Maneurop compressor with oil level sight glass and rotolock service valves. • Tube in tube water cooled condenser with water regulating valve mounted. • High capacity receiver with liquid shutoff valve. • Prewired electrical box with contactor and with start kit or transformer when appropriate. • Dual pressure control (prewired). Oils & Chemicals Water Cooled Condensing Units Type CM(E)W and CL(E)W include: a) REF pg 1 -44TEST_REFRIGERATION TEST 12/8/2010 5:56 PM Page 64 DANFOSS-MANEUROP REFRIGERATION HERMETIC CONDENSING UNITS Condensing Unit Nomenclature - Danfoss Air Cooled Models Condensing Unit Nomenclature - Water Cooled Units Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration How to Order: To order a condensing unit, the following is required: 1. Model series 2. Type of oil 3. Condenser type 4. Compressor size 5. Unit power supply 6. BOM Code Example: To order a 460/3/60 water cooled condensing unit with POE oil and a MT 50 compressor, the model number is: K-43 Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors HERMETIC CONDENSING UNITS Dimensions - New Danfoss Air Cooled Models Compressors, Chillers, Condensers DANFOSS-MANEUROP K-44 Refrigeration Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 1 Refrigeration Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 2 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats DANFOSS-MANEUROP UCG-HC AIR COOLED CONDENSING UNITS Model# HP Available Versions Condensing Unit R134a High/Medium Temperature Capacities 0 R134a Capacity (BHU/hr) @ 90 F ambient, rated at ARI conditions F 0 5 10 15 20 25 30 35 40 45 C -17.8 -15.0 -12.2 -9.4 -6.7 -3.9 -1.1 1.7 4.4 7.2 UCGC0017RW***** 1/6 A 527 614 701 799 897 1007 1117 1239 1361 1492 UCGC0020RW***** 1/5 A 1052 1196 1339 1505 1671 1860 2049 2260 2472 2699 UCGC0025RW***** 1/4 A,B 1193 1353 1514 1699 1884 2095 2306 2541 2776 3029 HCGC0033RW***** 1/3 A,B,C 1492 1709 1927 2179 2431 2717 3004 3324 3644 3986 UCGC0050RW***** 1/2 B,C 2339 2682 3025 3420 3815 4264 4713 5212 5712 6249 HCGC0055RW***** 1/2 B,C 3091 3466 3956 4446 5009 5573 6172 6771 7374 HCGC0075RW***** 3/4 C 4596 5079 5774 6470 7325 8180 9129 10077 11052 HCGC0100RW***** 1 D 6848 7448 8192 8936 9785 10634 11553 12471 13417 Rating Conditions (ARI) Application LBP Ambient Temp 90°F Return Gas 40°F Sub Cooling 5°F MBP/HBP 90°F 65°F 5°F Versions A= B= C= D= Powercord Powercord, receiver BX, receiver BX, receiver, low pressure control, 1 HP units use cartridge control HC AIR COOLED CONDENSING UNITS Condensing Unit R22 High/Medium Temperature Capacities Availables Versions Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration 0 R22 Capacity (BHU/hr) @ 90 F ambient, rated at ARI conditions Model# HP HCMC0025RW***** 1/4 A,B HCMC0033RW***** 1/3 A,B,C 2334 2590 2886 3182 3509 3837 HCMC0050RW***** 1/2 B,C 3322 3682 4117 4553 5044 5535 HCMC0060RW***** 5/8 B,C 3145 3736 4331 4925 5516 6108 6690 7273 7846 HCMC0075RW***** 3/4 C 3863 4603 5275 5947 6600 7252 7917 8583 9279 F 0 5 10 15 20 25 C -17.8 -15.0 -12.2 -9.4 -6.7 -3.9 -1.1 1.7 4.4 7.2 1959 2174 2440 2705 3009 3313 3644 3975 4320 4187 4537 4898 6061 6587 7129 HCMC0100RW***** 1 D HCMC0150UW**** 1 1/2 E,F HCMC0200UW**** 2 E,F HCMC0225UW**** 2 1/2 E,F HCMC0275UW**** 2 3/4 E,F 13477 15495 17513 19711 21909 24270 HCMC0300UW**** 3 E,F 14865 17222 19578 22225 24871 27827 30 35 40 45 4812 5333 5932 6531 7210 7890 8653 9417 10247 5810 6815 8035 9255 10707 12159 13787 15518 17432 7460 8919 10378 12042 13705 15575 17444 19468 21581 23848 10824 12557 14289 16210 18131 20243 22355 24596 26926 29352 26631 29077 31572 34127 30783 33990 37316 40861 4805 HCMC0400UW**** 4 E,F 17905 20868 23832 27120 30409 34069 37730 41686 45823 50282 HCMC0500UW**** 5 E,F 24237 27665 31093 35054 39016 43503 47990 52867 57998 63425 HCMC0700UW**** 7 E,F 30010 34312 38614 43622 48630 54327 60024 66208 72610 79392 HCMC0900UW**** 9 E,F 36271 42255 48240 55346 62451 70789 79127 88392 98310 109250 HCMC1000UW**** 10 E,F 47314 54823 62334 71115 79895 90002 100109 111258 123041 135855 HCMC1200UW**** 12 E,F 53238 61508 69778 79429 89079 100199 111318 123538 136389 150380 HCMC1350UW**** 13 1/2 E,F 58418 67360 76302 86712 97121 109115 121108 134212 148062 163039 Rating Conditions (ARI) Application LBP Ambient Temp 90°F Return Gas 40°F Sub Cooling 5°F MBP/HBP 90°F 65°F 5°F Versions A= Powercord B= Powercord, receiver C= BX, receiver D= BX, receiver, low pressure control, 1 HP units use cartridge control E= BX, receiver, dual pressure control, 1.5 HP- 3HP single fan units use cartridge control, larger then 3HP dual fan units use KPU fan cycling control F= WE+ filter driver, sight glass, fan cycling control, solenoid valve with coil, .5 HP – 3 HP KPU single fan units use cartridge control, larger than 3 HP dual fan units use KPU fan cycling control ***** Indicates model options (see nomenclature diagram (boxes 7 and 8). K-45 Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 3 DANFOSS-MANEUROP UCG-HC AIR COOLED CONDENSING UNITS MCA values for electrical code 1/4"F 1/4"S 14 9.1 8.7 9.5 26 1 POE 9.5 5/16"S 1/4"F 1/4"S 11.1 14 9.1 8.7 9.5 36 1 POE 10.8 6.1 UCGC0025RW***** 1/4 5/16"S 1/4"F 1/4"S 13 17 9.1 10.6 12.2 38 1 POE 10.8 6.4 UCGC0033RW***** 1/3 5/16"S 1/4"F 1/4"S 13 UCGC0050RW ***** 1/2 3/8"S 1/4"F 1/4"S 13.3 UCGC0055RW ***** 1/2 3/8"S 1/4"F 1/4"S 13.3 18 11.8 10.6 12.2 57 4 1 UCGC0075RW***** 3/4 3/8"S 1/4"F 1/4"S 16.9 19 13.4 9.3 14.8 85 4 1 UCGC0100RW***** 1 3/8"S 1/4"F 1/4"S 21 16.2 10.6 20.0 97 4 1 POE 11 2.16 Type Charge (oz) B 115V N Q R X 230V 220V 460V 575V (1) (3) (3) (3) 4.1 17 10.2 10.6 12.2 39 2.16 1 POE 10.8 11.7 17 11.8 10.6 12.2 53 2.16 1 POE 20.3 13.4 POE 19.6 15.4 POE 30.1 19.3 30.1 11 10.5 E1 E2 Weight (lbs) Receiver lbs @ 0 90 Figure Type Charge (oz) HCMC0025RW***** 1/4 5/16"S 1/4"F 1/4"S 13 17 10.2 10.6 12.2 40 2.16 1 AB 11.8 HCMC0033RW***** 1/3 5/16"S 1/4"F 1/4"S 13 17 10.2 10.6 12.2 41 2.16 1 AB 11.8 7.6 HCMC0050RW***** 1/2 5/16"S 1/4"F 1/4"S 13.3 17 11.8 10.6 12.2 47 2.16 1 AB 11.8 10.8 5.3 HCMC0060RW***** 5/8 3/8"S 1/4"F 1/4"S 13.3 18 11.8 10.6 12.2 57 4 1 AB 19.6 17.2 8.5 HCMC0075RW***** 3/4 3/8"S 1/4"F 1/4"S 16.9 19 14 9.3 14.8 64 4 1 AB 19.6 16.4 8.1 E1 HCMC0100RW***** 1 3/8"S 1/4"F 1/4"S 16.9 19 14 9.3 14.8 67 4 1 AB 19.6 9.5 E1 HCMC0150UW**** 1 1/2 1/2"S 1/4"F 3/8"S 19.6 24.8 16.1 16.5 16.0 130 10 1 MINERAL 28.7 14 9 6 HGMC0200UW**** 2 1/2"S 1/4"F 3/8"S 19.6 24.8 16.1 16.5 16.0 140 10 1 MINERAL 28.7 17 11 6 5 E3 HCMC0225UW**** 2 1/2 5/8"S 1/4"F 3/8"S 27.6 19.7 17.4 11.8 26.0 140 10 2 MINERAL 28.7 24 16 8 6 E3 HCMC0275UW**** 2 3/4 5/8"S 1/4"F 3/8"S 27.6 19.7 17.4 11.8 26.0 28 10 2 MINERAL 28.7 28 17 9 7 E3 HCMC0300UW**** 3 5/8"S 1/4"F 3/8"S 27.6 19.7 17.4 11.8 26.0 28 17.5 2 MINERAL 28.7 40 23 12 10 E4 10 B 115V N Q R X 230V 220V 460V 575V (1) (3) (3) (3) Oils & Chemicals Oil 6.2 E3 4 7/8"S 1/4"F 1/2"S 39.4 27.6 18.1 37.8 210 26 3 MINERAL 62.6 36 24 12 HGMC0500UW**** 5 7/8"S 1/4"F 1/2"S 47.2 31.5 26.4 19.7 45.7 300 26 3 MINERAL 62.6 52 32 16 HGMC0700UW**** 7 1 1/8"S 1/4"F 1/2"S 47.2 31.5 26.4 19.7 45.7 300 26 3 MINERAL 62.6 40 17 HGMC0900UW**** 9 1 1/8"S 1/4"F 5/8"S 59.1 34.3 34 22.4 56.7 500 36 3 MINERAL 131.9 50 26 21 E6 HGMC1000UW**** 10 1 1/8"S 1/4"F 5/8"S 59.1 34.3 34 22.4 56.7 500 36 3 MINERAL 131.9 60 30 24 E6 12 1 1/8"S 1/4"F 5/8"S 59.1 34.3 34 22.4 56.7 510 43 3 MINERAL 131.9 69 33 26 E6 13 1/2 1 1/8"S 1/4"F 5/8"S 59.1 34.3 34 22.4 56.7 540 43 3 MINERAL 131.9 75 38 31 E6 HGMC1350UW**** K-46 E5 E5 E5 Accessories, Supplies & Commodities B HGMC0400UW**** HGMC1200UW**** 22 A Tools & Instruments Liquid Process HP Suction Model# Refrigeration PORTS Height (in) Depth (in) MCA values for electrical code Width (in) Mounting holes Outdoor enclosure Condensing Units R22 High/Medium Dimensions and Specifications Thermostats Indoor Air Quality Heating Components 19 B Motors Height (in) 1/4"F 1/5 A Electrical Depth (in) 1/6 UCGC0020RW***** HP Figure Liquid UCGC0017RW ***** Model# Width (in) Process Oil Suction Weight (lbs) Receiver lbs @90 0 Mounting holes PORTS Outdoor enclosure Condensing Unit R134a High/Medium Dimensions and Specifications Compressors, Chillers, Condensers Refrigeration Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 4 Indoor Air Quality Heating Components Electrical Motors DANFOSS-MANEUROP UC-HC AIR COOLED CONDENSING UNITS Condensing Unit R404A High/Medium Temperature Capacities Availables versions Compressors, Chillers, Condensers Refrigeration 0 R404A Capacity (BHU/hr) @ 90 F ambient, rated at ARI conditions F 0 5 10 15 C -17.8 -15.0 -12.2 -9.4 -.07 -3.9 -1.1 1.7 4.4 7.2 961 1071 1181 1301 1422 1552 1682 1819 1956 2098 1625 1808 1992 2198 2405 2634 2864 3115 3367 3635 2915 3188 3461 3756 4052 4340 3878 4279 4679 5119 5560 6030 4925 5427 5928 6484 7039 7634 6998 7693 8388 9159 9931 10759 11829 Model# HP UCHC0020RW***** 1/5 A UCHC0025RW***** 1/4 A UCHC0033RW***** 1/3 A,B,C 1971 2194 2417 2666 UCHC0050RW***** 1/2 B,C 2519 2838 3158 3518 UCHC0060RW***** 5/8 B,C 3648 4035 4480 UCHC0075RW***** 3/4 C 5235 5768 6383 20 25 30 35 40 45 UCHC0100RW***** 1 D 6156 6880 7604 8327 9042 9757 10454 11150 UCZC0150UW**** 1 1/2 E,F 5653 6729 7806 9004 10202 11535 14374 14374 15859 17484 UGZC0200UW**** 2 E,F 8522 9930 11338 12941 14543 16344 18227 20253 22278 24528 HCZC0225UW**** 2 1/2 E,F 11258 12870 14483 16253 18023 19974 21992 24108 26223 28532 HCZC0275UW**** 2 3/4 E,F 13317 15265 17213 19325 21436 23728 26098 28531 30963 33558 HCZC0300UW**** 3 E,F 15374 17591 19808 22204 24600 27206 29855 32611 35366 38283 HGZC0400UW**** 4 E,F 20074 23089 26103 29451 32798 36521 40377 44475 48573 53103 HGZC0500UW**** 5 E,F 25329 29023 32717 36783 40850 45339 49965 54810 59725 64640 HGZC0700UW**** 7 E,F 32645 37020 41395 46220 51046 56330 61824 67524 73379 79234 HGZC0900UW**** 9 E,F 42317 48984 55651 63271 70891 79528 88902 98276 108411 118590 HGZC1000UW***** 10 E,F 50572 57395 64218 71795 79372 87743 96495 105668 115042 133677 HGZC1200UW***** 12 E,F 58238 65784 73330 81645 89960 99106 108643 118562 128799 150707 HGZC1350UW***** 13 1/2 E,F 62293 70102 77911 86496 95082 104476 114193 124446 134767 160773 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Conditioning Unit R404A Low Temperature Capacities Model# HP Availables versions Oils & Chemicals Thermostats UC-LC-LGH AIR COOLED CONDENSING UNITS UCHC0020RW***** 1/5 A UCHC0025RW***** 1/4 UCHC0033RW***** UCHC0050RW***** 0 R404A Capacity (BHU/hr) @ 90 F ambient, rated at ARI conditions F -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 C -40.0 -37.2 -34.4 -31.7 -28.9 -26.1 -23.3 -20.6 -17.8 -15.0 -12.2 327 387 447 520 593 679 764 862 961 1071 1181 A 595 693 791 909 1026 1165 1303 1464 1625 1808 1992 1/3 A,B,C 699 821 944 1090 1235 1406 1577 1774 1971 2194 2417 1/2 B,C 710 885 1060 1267 1474 1716 1959 2239 2519 2838 3158 LCHC0060RW***** 5/8 B,C 1274 1511 1748 2025 2303 2622 2941 3299 3658 4054 4450 LCHC0075RW***** 3/4 C 1380 1688 1996 2341 2686 3073 3460 3891 4322 4797 5272 LCHC0100RW***** 1 D 1779 2347 2915 3504 4093 4711 5329 5980 6630 7314 7998 LCHC0150UW**** 1-1/2 E,F 3651 4380 5110 5911 6768 7625 8562 9499 10565 LCHC0200UW**** 2 E,F 5231 6042 6852 7768 8770 9772 10893 12015 13299 LCHC0300UW**** 3 E,F 8231 9810 11389 13089 14844 16599 18399 20199 20606 LGHC0400UW**** 4 E,F 11218 13271 15326 17583 19984 22385 LGHC0600UW**** 6 E,F 17247 20270 23290 26663 30306 33950 LGHC0750UW**** 7-1/2 E,F 22340 26204 30068 34154 38282 42410 Rating Conditions (ARI) Application Ambient Temp Return Gas Sub Cooling LBP 90°F 40°F 5°F MBP/HBP 90°F 65°F 5°F Versions A= B= C= D= E= F= Powercord Powercord, receiver, BX, receiver BX, receiver, low pressure control, 1 HP units use cartridge control BX, receiver, dual pressure control, 1.5 HP- 3HP single fan units use cartridge control, larger then 3HP dual fan units use KPU fan cycling control WE+ filter driver, sight glass, fan cycling control, solenoid valve with coil, .5HP-3HP single fan units use cartridge control, larger then 3HP dual fan KPU fan cycling control K-47 Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 5 DANFOSS-MANEUROP UC-HC-HG-LC-LG AIR COOLED CONDENSING UNITS Figure 1/4"F 1/4"S 12.4 14 10.2 8.7 9.5 32 1 POE 9.5 5.1 5/16"S 1/4"F 1/4"S 13 17 10.2 10.6 12.2 41 2.16 1 POE 10.8 6.2 UCHC0033RW***** 1/3 5/16"S 1/4"F 1/4"S 13 17 10.2 10.6 12.2 39 2.16 1 POE 10.8 7.6 UCHC0050RW ***** 1/2 5/16"S 1/4"F 1/4"S 13.3 17 11.8 10.6 12.2 49 2.16 1 POE 18.6 11.6 4.2 HCHC0060RW ***** 5/8 5/16"S 1/4"F 1/4"S 16.2 19 14 9.3 14.8 59 2.16 1 POE 20.3 14.2 7.1 HCHC0075RW***** 3/4 3/8"S 1/4"F 1/4"S 16.9 19 13.4 9.3 14.8 76 4 1 POE 20.3 23.3 9.4 E1 HCHC0100RW***** 1 3/8"S 1/4"F 1/4"S 16.9 19 13.4 9.3 14.8 77 4 1 POE 19.6 10.6 E1 HCZC0150UW **** 1 1/2 1/2"S 1/4"F 3/8"S 19.6 24.8 16.1 16.5 16.0 130 10 1 POE 28.7 14 9 6 HGZC0200UW**** 2 1/2"S 1/4"F 3/8"S 19.6 24.8 16.1 16.5 16.0 140 10 1 POE 28.7 17 11 6 5 E3 HCZC0225UW**** 2 1/2 5/8"S 1/4"F 3/8"S 27.6 19.7 17.4 11.8 26.0 140 10 1 POE 28.7 24 16 8 6 E3 HCZC0275UW**** 2 3/4 5/8"S 1/4"F 3/8"S 27.6 19.7 17.4 11.8 26.0 28 10 1 POE 28.7 28 17 9 7 E3 HCZC0300UW**** 3 5/8"S 1/4"F 3/8"S 27.6 19.7 17.4 11.8 26.0 28 17.5 1 POE 28.7 40 23 12 10 E4 10 E5 N Q R X 4 7/8"S 1/4"F 1/2"S 39.4 27.6 18.1 37.8 210 26 1 POE 62.6 35 24 12 HGZC0500UW**** 5 7/8"S 1/4"F 1/2"S 47.2 31.5 26.4 19.7 45.7 300 26 1 POE 62.6 52 32 16 HGZC0700UW**** 7 1 1/8"S 1/4"F 1/2"S 47.2 31.5 26.4 19.7 45.7 300 26 1 POE 62.6 40 17 HGZC0900UW**** 9 1 1/8"S 1/4"F 5/8"S 59.1 34.3 34 22.4 56.7 500 36 1 POE 131.9 50 26 21 E6 HGZC1000UW***** 10 1 1/8"S 1/4"F 5/8"S 59.1 34.3 34 22.4 56.7 500 36 1 POE 131.9 60 30 24 E6 HGZC1200UW***** 12 1 1/8"S 1/4"F 5/8"S 59.1 34.3 34 22.4 56.7 510 43 1 POE 131.9 69 33 26 E6 13 1/12 1 1/8"S 1/4"F 5/8"S 59.1 34.3 34 22.4 56.7 540 43 1 POE 131.9 75 38 31 E6 10.2 8.7 9.5 32 1 POE 9.5 5.1 13 17 10.2 10.6 12.2 41 2.16 1 POE 10.8 6.2 UCHC0033RW ***** 1/3 5/16"S 1/4"F 1/4"S 13 17 10.2 10.6 12.2 39 2.16 1 POE 10.8 7.6 UCHC0050RW ***** 1/2 5/16"S 1/4"F 1/4"S 13.3 17 11.8 10.6 12.2 49 2.16 1 POE 18.6 11.6 4.2 Charge (oz) Height (in) Depth (in) Width (in) Liquid Process Suction LCHC0060RW ***** 5/8 3/8"S 1/4"F 1/4"S 13.3 17 11.8 10.6 12.2 48 2.2 1 POE 18.6 13.9 6.3 LCHC0075RW ***** 3/4 3/8"S 1/4"F 1/4"S 13.3 18 11.8 10.6 12.2 63 4 1 POE 19.6 11.9 5.5 LCHC0100RW ***** 1 3/8"S 1/4"F 1/4"S 16.9 19 13.4 9.3 14.8 90 4 1 POE 30.1 8.0 LCHC0150UW **** 1 1/2 1/2"S 1/4"F 3/8"S 19.6 24.8 16.1 16.5 16.0 130 10 1 POE 28.7 18 11 E1 E1 5 4 E3 LCHC0200UW **** 2 5/8"S 1/4"F 3/8"S 19.6 24.8 16.1 16.5 16.0 130 10 1 POE 28.7 24 19 6 4 E3 LCHC0300UW **** 3 7/8"S 1/4"F 1/2"S 19.1 25.4 150 10 2 POE 62.6 32 21 10 8 E4 LGHC0400UW **** 4 7/8"S 1/4"F 1/2"S 39.4 27.6 18.1 37.8 210 17.5 3 POE 62.6 36 78 12 10 E4 LGHC0600UW **** 6 1 1/8"S 1/4"F 1/2"S 47.2 31.5 26.6 19.7 45.7 300 26 3 POE 131.9 43 17 14 E5 LGHC0750UW **** 7 1/2 1 1/8"S 1/4"F 1/2"S 47.2 31.5 26.6 19.7 45.7 300 26 3 POE 131.9 53 22 18 E5 27 27.5 17.4 22 K-48 Thermostats 14 1/4"F 1/4"S 115V 230V 220V 460V 575V (1) (3) (3) (3) Oils & Chemicals 1/4"F 1/4"S 12.4 5/16"S B MCA values for electrical code B N Q R X Accessories, Supplies & Commodities 1/4"F 1/4 A Type Figure 1/5 UCHC0250RW ***** HP Weight (lbs) UCHC0203RW ***** Model# Outdoor enclosure 0 Oil Receiver lbs @ 90 Mounting holes Tools & Instruments E5 Indoor Air Quality E5 Conditioning Unit R404A Low Dimensions and Specifications PORTS Heating Components E3 Electrical Motors 115V 230V 220V 460V 575V (1) (3) (3) (3) Refrigeration Charge (oz) B Type Liquid Process Suction B MCA values for electrical code Oil HGZC0400UW**** HGZC1350UW***** 22 A Weight (lbs) 1/4"F 1/4 HP Height (in) 1/5 UCHC0025RW***** Model# Depth (in) UCHC0020RW***** PORTS Width (in) Receiver lbs@ 90 0 Mounting holes Outdoor enclosure Conditioning Unit R404A High/Medium Dimensions and Specifications Compressors, Chillers, Condensers Refrigeration Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 6 DANFOSS-MANEUROP AIR COOLED CONDENSING UNITS OUTDOOR ENCLOSURES Danfoss condensing units are available in lightweight, corrosive resistant outdoor enclosures to protect against the elements. Six enclosure options are available. • Innovative design for quick and assembly • Durable, sturdy 16 gauge galvanized steel • 6 models available to protect units up to 13.5 HP OUTDOOR ENCLOSURE Unit H L W MODEL CODE NUMBER 1 HP and below HCZC0150 HCZC0200 LCZC0150 LCZC0200 HCZC0250 HCZC0300 LCZC0300 15 18 22 E1 119-6040 19 26 22 E2 119-6041 19 29 29.5 E3 119-6042 23 30 42 E4 119-6043 27 33 48 E5 119-6044 33 36 62 E6 119-6045 HGZC0400 LGZC0400 HGZC0500 HGZC0600 HGZC0700 LGZC0600 LGZC0750 HGZC0900 HGZC1000 HGZC1200 HGZC1350 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-49 Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 7 7006507 FAN GUARD 18" HCZD0300; HGZD0550,0600, 0700; HGMC0400, 0550, 0600, 0700; HGZC0550, 0600, 0675, 0700; LGZC0600, 0750 _ _ _ _ TO10317P01 FAN GUARD 22" TO10314P01 FAN MOTOR SUPORT Needs to be assembly y fan guard 22" _ _ _ _ HGMC, HGZC0900, 1000, 1200, 1350; HGZD1050, 1200; _ _ _ _ HCMC, HGZC, HGZD0200 _ _ _ _ 7006501 FAN GUARD 11" 119-3094 FAN BASE 72mm LCHC0033 _ _ _ _ 119-3095 FAN BASE 94mm LCHC0050, 0060, 0065, 0075 _ _ _ _ 119-3096 FAN BASE 54mm LCHC0025,0026 _ _ _ _ FAN GUARD 9" FOR EBM MOTOR HCHC0020, 0025, 0033; MCGA0050; MCGB0040, 0045, 0050; MCHA0033, 0040; LCHB0040; LCHC0033; UCGC0033; UCHC0020, 0025, 0033; _ _ _ _ 119-3625 FAN GUARD 8" HCGC0020,0025; MCGA, MCGB0020, 0025, 0033; MCHA0020,0025; LCGC0020, 0025; LCHB0025, 0026, 0033; LCHC0020, 0025, 0026; UCGC0017, 0020 , 0025 _ _ _ _ 119-3626 FAN GUARD 7" SQR BLK 119-2041, 119-2051 119-3634 FAN GUARD 12" FOR EBM HCGC0065; HCHC0060, 0075, 0100; HCMC0075,0100; MCGB0075; MCHA0075, 0100; LCHB0100 _ _ _ _ 119-3637 FAN GUARD 10" HCGC0050,0055; HCHC0050; HCMC0050, 0060; MCHA0050, 0060; MCGB0055; LCHB0050, 0060,0075; LCHC0040,0050, 0060, 0065, 0075; UCGC, UCHC0050; _ _ _ _ 119-3638 FAN GUARD 12" HCGC75; HCHC75, 100; MCGB100; LCHC100 _ _ _ _ 191U138101 FAN GUARD 12" HCHC0101 _ _ _ _ 191U138110 FAN GUARD 12" HCGC0100 _ _ _ _ 119-3624 K-50 Motors _ _ _ _ 7006506 Electrical FAN GUARD 14" HCGC0200; HCGD0150,0200; HCMC0150, 0250, 0300; HCZC0150, 0225, 0250, 0275, 0300, 0400; HCZD0150, 0250; HGZC, HGZD0400; LCZB0150, 0200, 0300; LCZC0150, 0200, 0300; LGZC0400 Heating Components CU Voltages Indoor Air Quality Unit Used Thermostats Description Oils & Chemicals Danfoss Code Accessories, Supplies & Commodities Fan Guard Tools & Instruments OPTYMA Refrigeration DANFOSS-MANEUROP Compressors, Chillers, Condensers Refrigeration Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 8 Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration DANFOSS-MANEUROP OPTYMA Receiver Danfoss Code Description Unit Used CU Voltages RECEIVER 6" x 20" 17.5 Lb BLACK HGMC, HGZC, LGZC0400 _ _ _ _ 680851001 RECEIVER 8 5/8" x 18" 26 Lb BLACK HGMC, HGZC0550, 0600,HGMC0700; HGZC0675, 0700; HGZD0700 LGZC0600, 0750 _ _ _ _ 680851101 RECEIVER 8 5/8" x 21" 36 Lb BLACK 680851201 RECEIVER 8 5/8" x 25" 43 Lb BLACK 680850801 680853601 119-3643 119-3644 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats 119-3670 119-3671 HGMC, HGZC0900, 1000, 1200; HGZD1050, 1200; HGMC, HGZC, HGZD1350 RECEIVER 5" x 12" 10 Lb BLACK HCMC0150, 0200, 0250, 0300; HCZC0150, 0225, 0250, 0275, 0300; HGZC0200, 0300; LCZB, LCZC0150, 0200, 0300; Receiver 0.4 L UL BK 2.5"ODx5" UCGC0025, 0033, 0050; UCHC0025, 0033, 0050, 0060; HCHC, LCHC0060; HCMC0025, 0030, 0033, 0050 Receiver Receiver Receiver UL BK 3"ODx9" UCGC0025, 0033, 0050; UCHC0025, 0033, 0050, 0060; HCHC, LCHC0060; HCMC0025, 0030, 0033, 0050 UL BK 2.5"ODx5" UCGC0025, 0033, 0050; UCHC0025, 0033, 0050, 0060; HCHC, LCHC0060; HCMC0025, 0030, 0033, 0050 UL BK 3"ODx9" UCGC0025, 0033, 0050; UCHC0025, 0033, 0050, 0060; HCHC, LCHC0060; HCMC0025, 0030, 0033, 0050 _ _ _ _ _ _ _ _ _ _ _ _ 118U0522 RECEIVER TANK 2.2 Lb UCGC0025, 0033, 0050; UCHC0025, 0033, 0050, 0060; HCHC, LCHC0060; HCMC0025, 0030, 0033, 0050 _ _ _ _ 118U0534 RECEIVER TANK 4 Lb HCGC0055, 0075, 0100; HCHC, LCHC0075, 0100; HCMC0060, 0075, 0100 _ _ _ _ Description Unit Used CU Voltages Pressure Control Danfoss Code 060-5246 Kpu 7 (high pressure) Model Option Code "K"' _ _ _ _ 060-5233 Kpu 1 (Low pressure) Model Option Code "M"' _ _ _ _ 060-5242 Kpu 5 (Fan Cycl ) Model Option Code "9"' _ _ _ _ 060-5250 Pressure control Kpu 15 (dual) Model Option Code "J"' _ _ _ _ 061F6050 CARTRIDGE ACB-2UB2115W Model Option Code "P"' _ _ _ _ K-51 Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 9 OPTYMA Crankcase Heater Danfoss Code Description Unit Used CU Voltages 7303507 CRANKCASE HEATER 48" Including STOPPINGRING MA10109 1.5 Hp or larger N, Q, R & X 119-5400 Belt Heater 115 V 1.0 Hp and below Model Option Code "H"' B 119-5401 Belt Heater 220 V 1.0 Hp and below. Model Option Code "H"' N Motors DANFOSS-MANEUROP Compressors, Chillers, Condensers Refrigeration _ _ _ _ 6804503V04 Rotalock Service Valve V04 1 1/4"RX3/4"S MT(Z) 44, 50, 56, 64, 72, 80 LT(Z) 44, 50 Discharge _ _ _ _ 6804504V05 Rotalock Service Valve V05 1 1/4"RX7/8"S MT(Z) 100, 125, 144, 160 LT(Z) 88, 100 Discharge _ _ _ _ 6804501V06 Rotalock Service Valve V06 1"RX1/2"S MT(Z) 18, MT(Z) 22-3 & 4, MT(Z) 28-3 & 4, Suction MT(Z) 22, 28, 32, 36, 40 Discharge _ _ _ _ 6804505V07 Rotalock Service Valve V07 1 3/4"RX7/8"S MT(Z) 44, 50, 56, 64, 72, 80, 100, 125, 144, 160 LT(Z) 44, 50, 88, 100 _ _ _ _ 6804502V09 Rotalock Service Valve V09 1 1/4"RX5/8"S MT(Z) 22-1, 28-1, 32, 36,40 Suction LT(Z) 22, 28 Suction _ _ _ _ 119-3609 LIQUID STOP VALVE 1/4 HCMC25, 33, 50; UCGC17, 20, 25, 33; UCHC20, 25, 33 _ _ _ _ 119-3610 SUCTION STOP VALVE 3/8 HCHC60, 75; HCMC25, 33, 50; LCHC60; UCGC17, 20, 25, 33, 50; UCHC20, 25, 33, 50, 60 _ _ _ _ 119-3611 LIQUID STOP VALVE 1/4 HCGC55, 75, 100; HCHC75,100; HCMC25, 33, 50, 60, 75, 100; LCHC60, 75, 100; UCGC, UCHC25, 33, 50 _ _ _ _ 119-3977 SUCTION STOP VALVE 5/8 HCGC55; HCHC75, 100; HCMC60, 75, 100; LCHC75 _ _ _ _ 119-3978 SUCTION STOP VALVE 1/2 HCGC75, 100; LCHC100 _ _ _ _ Description Unit Used CU Voltages 014-0172 SIGHT GLASS SGN 10 All Units with Refigerant HFC _ _ _ _ 014-0173 SIGHT GLASS SGN 12 All Units with Refigerant HFC _ _ _ _ 014-0174 SIGHT GLASS SGN 16 All Units with Refigerant HFC _ _ _ _ 014-0182 SIGHT GLASS SGI 10 All Units with Refrigerant HCFC y CFC _ _ _ _ 014-0183 SIGHT GLASS SGI 12 All Units with Refrigerant HCFC y CFC _ _ _ _ 014-0184 SIGHT GLASS SGI 16 All Units with Refrigerant HCFC y CFC _ _ _ _ Sight Glass Danfoss Code K-52 Heating Components MT(Z) 44, 50, 56, 64, 72, 80, 100, 125, 144, 160 LT(Z) 44, 50, 88, 100 Indoor Air Quality Rotalock Service Valve V02 1 3/4"RX1 1/8"S Thermostats 6804506V02 Oils & Chemicals CU Voltages Accessories, Supplies & Commodities Compresor / Unit Used Tools & Instruments Description Refrigeration Danfoss Code Electrical Service Valves Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 10 DANFOSS-MANEUROP OPTYMA Aspera Electrical Accessories Kits Danfoss Code Unit Used Description CU Voltages 119-7443 191U196000 T6217Z1 115V HCGC60, HCGC65 119-7444 191U196100 T6217E 115V HCMC60 B 119-7445 191U196200 T6217E 220V HCMC60 N 119-7446 191U196300 J6220Z 115V HCGC, MCGB75 B 119-7447 191U196400 J6220Z 220V HCGC, MCGB75 N 119-7448 191U196500 T2168GK 220V LCHC65 N 119-7449 191U196600 T2168GK 115V LCHC65 B 119-7450 191U196700 T2178GK 115V LCHB,LCHC 75 B 119-7451 191U196800 T2178GK 220V LCHB,LCHC 75 N 119-7452 191U197000 T6220GK 220V HCHC, MCHA 75 N 119-7453 191U197100 J9226GK 220V HCMC101, MCHA100 N 119-7454 191U197200 T6222GK 220V HCHC100 N 119-7455 191U197300 J2192GK 220V LCHB,LCHC 100 N 119-7456 191U197400 J6226Z 220V HCGC, MCGB100 N 119-7457 191U197500 NE6181E 115V HCMC25 B 119-7458 191U197600 NE6210E 115V HCMC33 B 119-7459 191U197700 NE9213E 115V HCMC50 B 119-7460 191U197800 NE9213E 220V HCMC50 N 119-7461 191U197900 T6215Z 115V HCGC50, MCGB55 B 119-7462 191U198000 T6220E 115V HCMC75 B N 191U198100 T6220E 220V HCMC75 119-7464 191U198200 T6222E 115V HAM012E35B B 119-7465 191U198300 J7231F 220V HAM016E35N N N 119-7466 191U198500 J7225F 220V HAM10, HAM12 119-7467 191U198600 T6222E 115V HAM12,15 HCMC100 B 119-7468 119-8000 T6213A 115V HCBC50 B 119-7469 119-8001 T6215A 115V HCBC55 B 119-7470 119-8002 J6220A 115V HCBC75 B 119-7471 119-8003 J6220A 220V HCGC75 N Tools & Instruments Refrigeration B 119-7463 Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-53 Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 11 DANFOSS-MANEUROP OPTYMA Clips Unit Used CU Voltages 119-3361 COMPRESSOR CLIPS All units with steel base plate All 119-3362 COMPRESSOR CLIPS All units with plastic base plate All Description Compresor / Unit Used CU Voltages RUN CAPACITOR 25MFD 440VAC RUN HCZC, HCZD150 N RUN CAPACITOR 45 MFD 440 VAC HCMC250, 300; HCZC250, 275, 300; HCZD225, 250, 300, 400; HGZC400; LCZB300; LCZC300, 400 N 191U012501 RUN CAPACITOR 50 MFD 440VAC HCGC0200, 250 N 191U013701 RUN CAPACITOR 55 MFD 440 VAC HGZC,HGZD0550 N 191U012600 start capacitor 233-280 HGZC,HGMC0500 N 191U012800 CAPACITOR 145-175MF 330V START HCMC, HCZD, HCZC0250; HCGD0150; HCZC0520; LCZC0300; HGZC, HGMC, LGZC0400; LCZB, LCZC0200. N CAPACITOR 100 MFD LCZB, LCZC, HCZD, HCZC, HCMC0150; LCZC, HCGD, HCZC, HCMC0200; HCZC, HCMC0275; HCZD, HCZC, HCMC0300; N Accessories, Supplies & Commodities Tools & Instruments 191U012900 Oils & Chemicals 191U013601 Heating Components 7304533 Indoor Air Quality Danfoss Code Thermostats Capacitors Electrical Motors Description K-54 Refrigeration Danfoss Code Compressors, Chillers, Condensers Refrigeration Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 12 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration DANFOSS-MANEUROP OPTYMA Filter Danfoss Code Description Unit Used CU Voltages 023Z5023 FILTER DRIERS DCL083 s 3/8" Model Option Code "F"' _ _ _ _ 023Z5032 FILTER DRIERS DCL164s 1/2" Model Option Code "F"' _ _ _ _ 023Z5033 FILTER DRIERS DCL165 5/8" Model Option Code "F"' _ _ _ _ 023Z5058 FILTER DRIERS DML083 3/8" Model Option Code "F"' _ _ _ _ 023Z5064 FILTER DRIERS DCL163s 3/8" Model Option Code "F"' _ _ _ _ 023Z5067 FILTER DRIERS DML164 1/2" Model Option Code "F"' _ _ _ _ Relay Danfoss Code Description Unit Used CU Voltages START RELAY 35 A. _ _ _ _ _ _ All units 220 Volts Single phase Description Unit Used CU Voltages CONTACTOR 3P 40A 208-240V HGMC0400, 0550, 0600, 0700, 0900, 1000, 1200, 1350; HGZC0400, 0550, 0600, 0675, 0700, 0900, 1000, 1200, 1350; HGZD0400, 0550, 0600, 0700, 1050, 1200, 1350; LGZC0400, 0600, 0750 Q 7305504 CONTACTOR 3P 30A 208-240V HGMC0600, 0700, 0900, 1000; HGZC0400, 0550, 0600, 0675, 0700, 0900, 1000, 13500; HGZD0400, 0550, 0600, 0700, 1050, 1200, 1350; LGZC0400, 0600, 0750 R 7305505 CONTACTOR 3P 50A 208-240V HGMC, HGZC, HGZD0400, 0550; LGZC0400 N CONTACTOR 2P 30A 208-240V HCGD, HCMC, HGZC0150,0200; HCZC0150; HGZD0150, 0200; LCZB, LCZC0150, 0200, 0300 N Description Unit Used CU Voltages 7306500 TRANSFORMER 480/240V B050PU1519JJ 1.5 Hp and larger R 7306506 TRANSFORMER 230/460/575V PRI 1.5 Hp and larger X 8173024 Contactors Danfoss Code 7305503 7305513 Transformer Danfoss Code K-55 Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 13 CU Voltages 191U196000 T6217Z1 115V HCGC60, HCGC65 B 191U196100 T6217E 115V HCMC60 B 191U196200 T6217E 220V HCMC60 N 191U196300 J6220Z 115V HCGC, MCGB75 B 191U196400 J6220Z 220V HCGC, MCGB75 N 191U196500 T2168GK 220V LCHC65 N 191U196600 T2168GK 115V LCHC65 B 191U196700 T2178GK 115V LCHB,LCHC 75 B 191U196800 T2178GK 220V LCHB,LCHC 75 N 191U197000 T6220GK 220V HCHC, MCHA 75 N 191U197100 J9226GK 220V HCMC101, MCHA100 N 191U197200 T6222GK 220V HCHC100 N 191U197300 J2192GK 220V LCHB,LCHC 100 N 191U197400 J6226Z 220V HCGC, MCGB100 N 191U197500 NE6181E 115V HCMC25 B 191U197600 NE6210E 115V HCMC33 B 191U197700 NE9213E 115V HCMC50 B 191U197800 NE9213E 220V HCMC50 N 191U197900 T6215Z 115V HCGC50, MCGB55 B 191U198000 T6220E 115V HCMC75 B N 191U198100 T6220E 220V HCMC75 191U198200 T6222E 115V HAM012E35B B 191U198300 J7231F 220V HAM016E35N N N J7225F 220V HAM10, HAM12 191U198600 T6222E 115V HAM12,15 HCMC100 B 119-8000 T6213A 115V HCBC50 B 119-8001 T6215A 115V HCBC55 B 119-8002 J6220A 115V HCBC75 B 119-8003 J6220A 220V HCGC75 N K-56 Refrigeration Tools & Instruments Accessories, Supplies & Commodities 191U198500 Motors Unit Used Electrical Description Heating Components Danfoss Code Indoor Air Quality Aspera Compressors Thermostats OPTYMA Oils & Chemicals DANFOSS-MANEUROP Compressors, Chillers, Condensers Refrigeration Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 14 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration DANFOSS-MANEUROP OPTYMA Condenser Danfoss Code Description Unit Used CU Voltages 7401563 CONDENSER 13T, 3R, 10 app, S HCMC, HGZC, HGZD0200 _ _ _ _ 7401566 CONDENSER, 14T, 5R,10APP, S HCGC0200; HCGD0150, 0200 _ _ _ _ 740154601 CONDENSER, 14T, 4R,10APP, S HCMC, HCZC, HCZD0150; LCZB, LCZC0150, 0200 _ _ _ _ CONDENSER 20T, 4R, 10APP, L HGZC, HGZD, LGZC0400 _ _ _ _ 191U131001 CONDENSER 24T,3R,10 APP,L HGMC, HGZC, HGZD, 0550, 0600 _ _ _ _ 191U131101 CONDENSER 24T,4R,10 APP,L HGZD0700; LGZC0600, 0700, 0750 _ _ _ _ 191U131201 CONDENSER 24T,5R,10 APP,L HGMC0700; HGZC0675, 0700 _ _ _ _ 191U131301 CONDENSER 32T,4R,10 APP,L HGMC, HGZC0900, 1000, 1200, 1350; HGZD1050, 1200, 1350 _ _ _ _ 191U131601 CONDENSER 16T, 4R, 10APP, S HCMC250, 300; HCZC225, 250, 275, 300; HCZD250; LCZC, LCZB300 _ _ _ _ _ _ _ _ 191U130701 191U131701 CONDENSER 20T, 3R, 10APP, S HCMC, HCZC0300 119-3152 CONDENSER AC 014T/2R/5/16"S 07FPI 119-2041, 119-2051 119-3158 CONDENSER AC 026T/3R/3/8"S 07FPI 119-2017, 119-2047 119-3160 CONDENSER AC 024T/3R/3/8"S 07FPI 119-2019 119-3169 CONDENSER 24T/3R 7F 5/16" HCGC0020,0025; MCGA, MCGB0033; MCHA0025; LCHC0025, 0026, 0033; UCGC0020, 0025 _ _ _ _ 119-3170 CONDENSER 26T/3R 7F 5/16 HCHC0020; HCMC0025, MCGB0040,0045;MCHA0033; LCHB0040; LCHC0033, UCG0033; UCHC0020 _ _ _ _ 119-3171 CONDENSER 44T/4R 7F 5/16 RIFLE HCHC0025,0033; HCMC0033; MCGA, MCGB0050; UCHC0025, 0033 _ _ _ _ 119-3172 CONDENSER 44T4R7F5/16R HCGC0055; HCHC0050, HCMC0050, 0060; MCGB0055; MCHA0060; LCHC0060,0065,0075; UCGC,UCHC0050; _ _ _ _ 119-3175 CONDENSER 52T/4R 9F 5/16 RIFLE HCGC0065; HCHC0060; HCMC0075,0100; MCGB0075; MCHA0075, 0100; LCHB0100 _ _ _ _ 119-3176 CONDENSER 16T2H RIFLED 5/16" MCGA, MCGB0020, 0025; MCHA0020; LCGC0020, 0025; LCHC0020, LCHB0025; UCGC0017 _ _ _ _ 119-3177 CONDENSER 32T/3H RIFLED MCHA0050; LCHB0050, 0060, 0075; LCHC0040, 0050, 0060 _ _ _ _ 119-3181 CONDENSER 36T/34R/12F 3/8R HCGC0075; HCHC0075, 0100; MCGB0100; LCHC0100, _ _ _ _ 119-3182 CONDENSER 60T/4H/15F3/8R HCGC0100 _ _ _ _ 119-3183 CONDENSER 48T/4R/10F 5/16R HCHC0101 _ _ _ _ K-57 _ _ _ _ Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 15 OPTYMA Fan Motor Unit Used CU Voltages HCGD00150, 00200; HCZC,HCZD0150; HGZD0400; LCZB, LCZC0150,0200; N&Q 191U137120 MOTOR 1/5 HP 220 V, 50/60 Hz, 4P, 1/2" 191U137620 MOTOR 1/5Hp 460 V,50/60 Hz, 4P,1/2" 191U137320 MOTOR 1/2 Hp 230 V, 50/60Hz, 4P, 1/2" 191U137820 MOTOR 1/2 Hp 460V,50/60Hz,4P, 1/2" 191U137420 MOTOR 3/4 Hp 230 V, 50/60Hz, 6P, 1/2" HGMC0900, 1000, 1350; HGZC0900, 1000, 1350; HGZD1050, 1200, 1350; R 191U137920 FAN MOTOR 3/4HP 460V/50-60Hz/1PH 6P HGZD0900, 1000, 1200, 1250, 1350; HGMD0900, 1000, 1200, 1350; HGZC0700, 0900, 1000, 1200, 1350; HGMC0900, 1000, 1200, 1350 R 7605524 MOTOR 1/3 Hp, 220V 50/60 Hz, 6P, 1/2" 7605513 MOTOR 1/3 Hp, 460V 50/60 Hz, 6P, 1/2" 7605518 MOTOR 1/15 HP 220 V, 50/60 Hz, SP, 5/16" HCGC0075,0100; HCHC0075, 0100; HCMC,HGZC,HGZD0200; MCGB0100; LCHC0100 N&Q 7605521 MOTOR 1/15 Hp 115 V, 50/60 Hz, SP, 5/16" HCGC, HCHC0075 B 119-3250 MOTOR 5W EBM 50/60 Hz, 115V, 4P MCGA0020,0025; MCGB0020,0025; MCHA0020; LCGC0020,0025; LCHC0020; LCHB0025; B FAN MOTOR 9W EBM 1550RPM 50/60 Hz, 115V, 4P HCGC0020, 0025; HCMC0025; HCMC0033; MCGA0033, 0050; MCGB0033, 0040, 0045, 0050; MCHA0025, 0033, 0040; LCHB0026,0033,0040; LCHC0025,0026, 0033; UCGC, UCHC0020,0025, 0033; B 119-3257 FAN MOTOR 16W EBM1550RPM 50/60 Hz, 115V, 4P HCGC0050, 0055; HCHC0050; HCMC0050, 0060; MCGB0055; LCHB0050, 0060, 0075; LCHC0040, 0050, 0060, 0065, 0075; UCGC, UCHC0050; B 119-3260 MOTOR 16W EBM 50/60 Hz, 220V, 4P HCMC0050, 0060; LCHB0075; LCHC0060, 0065, 0075; UCHC0050 N 119-3263 FAN MOTOR 34W EBM 50/60 Hz, 115V, 4P HCGC0065; HCHC0060; MCGB, MCHA0075 B 119-3264 FAN MOTOR EBM220/34W 50/60 Hz, 220V, 4P HCHC0060; HCMC0075, 0100; MCGB075; MCHA0075, 100; LCHB0100; N MOTOR 1/6 230W 230/50-60/1D300 HCHC0101 N 191U137020 K-58 Thermostats R Indoor Air Quality N&Q Oils & Chemicals HGMC0400, 0550, 0600, 0700; HGZC0550, 0600, 0675, 0700; LGZC0600, 0750 Heating Components R Electrical N&Q Accessories, Supplies & Commodities 119-3256 HCZD0300, 0550; HGZD0550, 0600, 0700 R Tools & Instruments Description Refrigeration Danfoss Code Motors DANFOSS-MANEUROP Compressors, Chillers, Condensers Refrigeration Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 16 DANFOSS-MANEUROP OPTYMA Unit Used CU Voltages FAN BLADE 14", 33°, 4 B, 1/2" HCGC0200; HCGD0150, 0200; HCMC0150, 0250, 0300; HCZC0150, 0225, 0250, 0275, 0300, 0400; HCZD0150, 0250; HGZD0400, LCZB, LCZC0150, 0200, 0300; LGZCC0400 _ _ _ _ 7002001 FAN BLADE 18", 24°, 4 B, 1/2" HCZD0300; HGMC0400, 0550, 0600, 0700; HGZC0550, 0600, 0675, 0700; HGZD0550,0600, 0700; LGZC0600, 0750 _ _ _ _ 7002002 FAN BLADE 22", 32°, 4 B, 1/2" HGZC900, 1000, 1200, 1350; HGZD1050, 1200, 1350; HGMC900, 1000, 1200, 1350 _ _ _ _ 7002503 FAN BLADE 11", 32°, 5 B, 5/16" HCMC, HGZC, HGZD0200 _ _ _ _ 119-3303 FAN BLADE 9",30°,5 blades HCHC0020, 0025, 0033; HCMC0025, 0033; MCGB0040, 0045, 0050; MCHA0033, 0040, 0050; LCHB0040; LCHC0033; UCGC0033, UCHC0020, 0025, 0033 _ _ _ _ 119-3305 FAN BLADE AL 7"x29°x5 -1/4"ID CCW 119-2041, 119-2051 "FAN BLADE 8",5 BLADES" HCGC0020,0025; MCGA, MCGB0033; MCHA0025; LCHB0026, 0033; LCHC0025, 0026; UCGC0020, 0025 _ _ _ _ FAN BLADE 8" x 22 MCGA, MCGB0020, 0025; MCHA0020; LCGC0020,0025; LCHB0025; LCHC0020; UCGC0017 _ _ _ _ 119-3311 FAN BLADE 10", 34°, 5 HCGC0050,0055; HCHC0050; HCMC0050,0060; MCGB0055; MCHA0050, 0060; LCHB0060, 0075; LCHC0040, 0050, 0060, 0065, 0075; UCGC, UCHC0050; _ _ _ _ 119-3313 FAN BLADE 12",28° , 5 S/buje VA-12-285 HCGC0065; HCHC0060; HCMC0025, 0033, 0075, 0100; MCGB0075; MCHA0075, 0100; LCHB0100; UCHC0033 _ _ _ _ Danfoss Code 7002000 119-3306 119-3309 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Electrical Motors Description Heating Components Fan Blade Indoor Air Quality Compressors, Chillers, Condensers Refrigeration K-59 Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 17 CMW36 CMW50 CMW64 CMW72 CMW80 CMW100 CMW125 CMW144 CMW160 Btu/h = Capacity. kW = Input Power. GPM = Water Flow in gpm. PSI = Water Pressure Drop through condenser in psi. Rated Conditions: 65° F/*40° F Return Gas, 5° F Subcooling, 60 Hz operation, 105° F Condensing, 75° F Entering Water (30° ITD). For 20° ITD (ITD = condensing temperature - entering water temperature) allow 3 gpm/ton water flow. K-60 Motors Electrical -10* 2940 0.80 0.3 0.1 4230 0.98 0.4 0.2 7450 1.54 0.9 0.3 9940 2.05 1.1 0.4 12,450 2.41 1.1 0.3 15,200 3.15 1.3 0.5 16,900 3.66 1.9 0.2 19,280 4.12 2.2 0.3 23,200 5.05 1.9 0.3 32,270 6.64 4.1 0.6 37,030 7.47 4.0 0.4 41,400 8.41 4.5 0.4 Heating Components CMW28 EVAPORATING TEMPERATURE (°F) 25 20 10 0 11,000 9400 6700 4550 1.29 1.23 1.10 0.96 1.1 0.9 0.6 0.4 1.0 0.7 0.4 0.3 15,850 13,700 10,000 6850 1.69 1.61 1.42 1.21 1.8 1.5 1.0 0.7 2.1 1.6 0.9 0.5 22,250 19,600 15,000 10,900 2.31 2.23 2.03 1.79 2.2 1.9 1.5 1.2 0.9 0.8 0.6 0.4 28,350 25,100 19,400 14,300 2.99 2.87 2.61 2.33 3.2 2.7 2.0 1.5 1.7 1.3 0.8 0.6 35,450 31,000 23,400 17,250 3.80 3.62 3.23 2.82 2.9 2.4 1.8 1.4 1.0 0.8 0.6 0.4 46,200 40,400 30,500 22,100 4.97 4.75 4.26 3.72 4.3 3.6 2.5 1.8 1.4 1.1 0.8 0.6 50,920 44,740 33,850 24,620 5.46 5.22 4.71 4.19 5.1 4.5 3.5 2.7 1.2 0.9 0.6 0.4 58,060 51,030 38,620 28,090 6.16 5.80 5.30 4.71 6.1 5.2 4.0 3.1 1.5 1.2 0.7 0.5 69,760 61,000 45,830 33,320 7.34 7.09 6.49 5.80 6.8 5.5 3.7 2.6 1.2 0.9 0.5 0.3 91,680 80,550 61,250 45,270 9.51 9.15 8.37 7.52 10.2 8.6 6.4 5.0 1.8 1.4 1.0 0.7 104,070 91,420 69,560 51,560 10.66 10.26 9.39 9.45 9.6 8.3 6.4 5.3 1.3 1.0 0.6 0.5 115,050 101,140 77,100 57,330 11.96 11.51 10.54 9.49 11.2 9.6 7.2 5.6 1.7 1.3 0.8 0.5 Indoor Air Quality CMW22 30 12,800 1.34 1.3 1.3 18,150 1.77 2.2 2.8 25,050 2.38 2.5 1.2 31,800 3.11 3.7 2.1 40,400 3.97 3.5 1.3 52,450 5.17 5.3 1.8 57,590 5.70 5.9 1.4 65,660 6.43 7.1 2.0 79,340 7.56 8.4 1.8 103,820 9.84 12.2 2.4 117,910 11.03 11.2 1.7 130,280 12.37 13.2 2.3 Thermostats CMW18 Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI 40 17,000 1.43 1.9 2.2 23,350 1.88 3.1 4.8 31,250 2.48 3.3 1.8 39,350 3.30 5.2 3.7 51,950 4.28 5.2 2.4 66,750 5.50 8.1 3.4 72,600 6.14 7.9 2.4 82,750 6.94 9.9 3.5 101,240 7.85 13.4 4.2 131,510 10.39 17.8 4.6 149,580 11.65 15.7 3.1 165,160 13.06 19.1 4.4 Oils & Chemicals MODEL Accessories, Supplies & Commodities Performance Data — CMW High-to-Medium Temperature — R-22 Tools & Instruments CMW/CMEW/CLW/CLEW WATER COOLED CONDENSING UNITS Refrigeration DANFOSS-MANEUROP Compressors, Chillers, Condensers Refrigeration Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 18 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration DANFOSS-MANEUROP CMW/CMEW/CLW/CLEW WATER COOLED CONDENSING UNITS Performance Data — CMEW High-to-Medium Temperature — R-134a CMEW18 Btu/h kW GPM 50 15,561 1.07 1.5 EVAPORATING TEMPERATURE (°F) 40 30 25 20 10 12,146 9272 8075 6878 4905 1.00 0.92 0.87 0.82 0.73 1.1 0.8 0.7 0.6 0.4 0 3297 0.63 0.3 CMEW22 PSI Btu/h kW GPM 1.6 19,618 1.35 2.2 1.0 15,312 1.26 1.6 0.6 11,690 1.16 1.1 0.5 10,181 1.11 0.9 0.4 8672 1.05 0.8 0.2 6184 0.92 0.6 0.1 4156 0.80 0.5 CMEW28 PSI Btu/h kW GPM 2.8 24,738 1.70 2.3 1.7 19,308 1.59 1.7 1.0 14,740 1.46 1.4 0.8 12,838 1.39 1.2 0.6 10,935 1.31 1.1 0.4 7798 1.16 0.8 0.2 5240 1.00 0.6 CMEW36 PSI Btu/h kW GPM 1.0 31,123 2.13 3.2 0.7 24,291 2.00 2.3 0.5 18,544 1.84 1.7 0.4 16,151 1.75 1.5 0.4 13,757 1.65 1.3 0.3 9810 1.46 0.9 0.2 6593 1.26 0.7 CMEW50 PSI Btu/h kW GPM 1.6 44,079 3.03 3.5 1.0 34,403 2.84 2.5 0.7 26,264 2.60 1.9 0.6 22,874 2.47 1.6 0.5 19,484 2.34 1.4 0.3 13,894 2.07 1.1 0.3 9337 1.79 0.8 CMEW64 PSI Btu/h kW GPM 1.3 55,440 3.81 5.1 0.8 43,270 3.57 3.5 0.6 33,034 3.28 2.5 0.4 28,770 3.11 2.1 0.4 24,506 2.95 1.8 0.3 17,475 2.61 1.3 0.3 11,744 2.25 1.0 CMEW72 PSI Btu/h kW GPM 1.7 62,247 4.27 5.9 1.1 48,583 4.01 4.5 0.8 37,090 3.68 3.5 0.7 32,303 3.50 3.1 0.6 27,515 3.31 2.7 0.5 19,620 2.93 2.0 0.44 13,186 2.53 1.3 CMEW80 PSI Btu/h kW GPM 1.4 69,889 4.80 10.4 0.9 54,547 4.50 8.2 0.6 41,643 4.14 6.3 0.5 36,268 3.94 5.5 0.4 30,892 3.73 4.7 0.4 22,029 3.29 3.3 0.1 14,805 2.84 2.1 CMEW100 PSI Btu/h kW GPM 3.9 88,149 6.05 9.1 2.5 68,799 5.67 5.9 1.6 52,524 5.21 3.9 1.3 45,744 4.95 3.3 1.0 38,964 4.69 2.8 0.6 27,785 4.14 2.0 0.3 18,672 3.58 1.4 CMEW125 PSI Btu/h kW GPM 2.1 110,888 7.62 12.2 1.0 86,547 7.14 8.6 0.5 66,073 6.56 6.3 0.4 57,544 6.23 5.5 0.4 49,015 5.91 4.9 0.3 34,952 5.21 4.1 0.2 23,489 4.51 3.6 CMEW144 PSI Btu/h kW GPM 2.4 124,493 8.55 11.0 1.4 97,166 8.02 8.2 0.9 74,179 7.36 6.3 0.8 64,604 7.00 5.6 0.7 55,029 6.63 4.9 0.5 39,240 5.85 3.9 0.5 26,371 5.06 3.1 CMEW160 PSI Btu/h kW GPM 1.6 139,768 9.60 13.3 1.0 109,088 9.00 9.6 0.6 83,280 8.48 7.2 0.5 72,530 7.96 6.3 0.5 61,780 7.45 5.5 0.3 44,055 6.57 4.3 0.3 29,607 5.68 3.3 PSI 2.2 1.3 0.8 0.6 0.5 0.4 0.3 MODEL Btu/h = Capacity. kW = Input Power. GPM = Water Flow in gpm. PSI = Water Pressure Drop through condenser in psi. Rated Conditions: 20° F superheat, 5° F Subcooling, 60 Hz operation, 105° F Condensing, 75° F Entering Water (30° ITD). For 20° ITD (ITD = condensing temperature - entering water temperature) allow 3 gpm/ton water flow. K-61 Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 19 CMEW36 CMEW50 CMEW64 CMEW72 CMEW80 CMEW100 CMEW125 CMEW144 CMEW160 Btu/h = Capacity. kW = Input Power. GPM = Water Flow in gpm. PSI = Water Pressure Drop through condenser in psi. Rated Conditions: 20° F Superheat, 5° F Subcooling, 60 Hz operation, 105° F Condensing, 75° F Entering Water (30° ITD). For 20° ITD (ITD = condensing temperature - entering water temperature) allow 3 gpm/ton water flow. K-62 Motors Electrical -25 1672 0.67 0.2 0.1 2351 0.88 0.3 0.1 4297 1.39 0.6 0.2 5513 1.75 0.8 0.3 6971 2.33 0.8 0.3 8754 2.98 1.0 0.4 9809 3.43 1.2 0.1 11,025 3.88 1.5 0.2 19,941 4.80 1.7 0.2 25,128 6.15 3.8 0.5 28,128 6.95 3.5 0.3 31,614 8.00 3.9 0.3 Heating Components CMEW28 -20 2351 0.79 0.3 0.1 3323 1.07 0.4 0.2 5268 1.59 0.7 0.3 6810 2.00 0.9 0.3 10,700 2.55 1.0 0.3 13,376 3.25 1.2 0.4 15,077 3.75 1.8 0.2 16,858 4.25 2.1 0.3 24,073 5.10 1.9 0.3 30,237 6.55 4.0 0.6 35,000 7.40 4.0 0.4 38,098 8.50 4.3 0.4 Indoor Air Quality CMEW22 EVAPORATING TEMPERATURE (°F) 30 25 20 10 0 -10 14,590 12,647 11,023 8026 5674 3810 1.48 1.44 1.38 1.25 1.10 0.93 1.6 1.3 1.1 0.8 0.5 0.4 1.7 1.3 1.0 0.6 0.4 0.2 5432 20,509 17,834 15,564 11,348 8026 1.30 2.07 2.02 1.92 1.75 1.55 0.6 2.7 2.3 1.9 1.3 0.9 3.8 2.9 2.2 1.2 0.7 0.4 25,940 23,185 20,266 15,238 11,348 7622 2.84 2.72 2.62 2.36 2.08 1.85 2.8 2.4 2.1 1.6 1.3 0.9 1.4 1.1 0.9 0.6 0.4 0.3 32,749 29,182 25,534 19,293 14,348 9726 3.57 3.42 3.30 2.97 2.62 2.35 4.1 3.5 2.9 2.1 1.6 1.2 2.5 1.9 1.5 0.9 0.5 0.4 46,610 41,746 37.694 29,021 21,803 15,483 5.10 4.77 4.57 4.07 3.55 3.05 4.7 4.0 3.4 2.4 1.6 1.3 2.0 1.6 1.3 0.8 0.5 0.4 57,656 52,606 47,339 36,559 27,398 19,454 6.55 6.12 5.87 5.22 4.57 3.90 6.9 5.8 4.9 3.3 2.4 1.7 2.6 2.0 1.6 1.0 0.7 0.6 65,821 59,090 53,174 41,016 30,721 21,722 7.47 7.00 6.70 5.97 5.22 4.45 7.5 6.5 5.7 4.4 3.3 2.5 2.2 1.7 1.4 0.9 0.6 0.4 73,927 66,305 59,658 46,040 34,531 24,477 8.50 7.95 7.63 6.78 5.93 5.05 9.3 7.8 6.8 5.1 3.9 2.9 3.3 2.4 1.9 1.1 0.7 0.5 91,597 81,304 72,062 56,577 43,933 32,181 9.37 8.55 8.25 7.60 6.92 6.10 12.2 9.3 7.6 5.2 3.7 2.6 3.5 2.2 1.5 0.8 0.5 0.3 113,805 102,213 90,704 71,089 55,283 40,530 11.42 10.97 10.60 9.72 8.87 7.85 14.9 12.6 10.6 7.8 6.0 4.8 3.4 2.5 1.9 1.2 0.9 0.7 127,830 114,779 102,830 79,924 62,090 45,475 12.91 12.40 11.97 11.02 10.05 8.85 13.1 11.3 9.8 7.6 6.0 4.8 2.2 1.7 1.3 0.9 0.6 0.4 143,477 128,889 114,299 89,652 69,711 51,067 14.85 14.25 13.75 12.65 11.55 10.20 16.4 13.9 11.8 8.8 6.9 5.4 3.3 2.5 1.8 1.1 0.7 0.5 Thermostats CMEW18 Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI 40 18,402 1.51 2.1 2.6 25.859 2.12 3.7 6.5 32,504 3.04 3.8 2.2 41,016 3.82 5.9 4.5 57,228 5.50 7.1 3.9 71,982 7.06 10.6 5.3 80,815 8.07 10.3 3.9 90,787 9.18 13.2 6.2 114,131 9.15 18.3 7.2 139,870 12.27 21.2 6.4 157,092 13.87 18.2 4.0 176,385 15.95 23.4 6.3 Oils & Chemicals MODEL Accessories, Supplies & Commodities Performance Data — CMEW High-to-Low Temperature — R-404A, R-507 Tools & Instruments CMW/CMEW/CLW/CLEW WATER COOLED CONDENSING UNITS Refrigeration DANFOSS-MANEUROP Compressors, Chillers, Condensers Refrigeration Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 20 Compressors, Chillers, Condensers Refrigeration DANFOSS-MANEUROP CMW/CMEW/CLW/CLEW WATER COOLED CONDENSING UNITS Performance Data — CLEW — Extra Low Temperature — R-404A, R-507 MODELS Motors CLEW22 CLEW44 CLEW50 CLEW88 CLEW100 -10 kW 7833 1.71 0.9 0.7 11,619 2.54 1.6 1.8 19,872 4.34 1.8 0.6 25,301 5.52 2.5 0.8 37,706 8.05 4.5 1.5 49,353 10.01 6.5 1.7 EVAPORATING TEMPERATURE (°F) -15 -20 -25 -30 -35 -40 Btu/h kW Btu/h kW Btu/h kW 6755 5757 4831 3979 3199 2370 1.59 1.47 1.35 1.22 1.10 0.97 0.8 0.6 0.5 0.4 0.4 0.3 0.6 0.5 0.4 0.3 0.2 0.1 10,020 8550 7177 5907 4733 3495 2.37 2.19 2.00 1.82 1.63 1.45 1.4 1.1 0.9 0.8 0.6 0.5 1.3 1.0 0.8 0.5 0.4 0.3 16,808 14,119 11,778 9747 8009 6076 4.05 3.75 3.44 3.12 2.81 2.48 1.6 1.4 1.2 1.0 0.9 0.8 0.5 0.4 0.4 0.3 0.3 0.3 21,810 18,658 15,808 13,250 10,958 8489 5.20 4.86 4.51 4.17 3.81 3.46 2.1 1.8 1.6 1.4 1.2 1.0 0.7 0.6 0.5 0.4 0.4 0.3 32,120 27,120 22,639 18,641 15,103 11,258 7.57 7.06 6.51 5.92 5.31 4.69 3.7 3.0 2.5 2.0 1.7 1.4 1.1 0.9 0.8 0.6 0.6 0.5 42,197 35,734 29,904 24,653 19,957 14,.891 9.39 8.75 8.07 7.36 6.65 5.93 5.5 4.7 4.1 3.5 2.9 2.4 1.3 1.0 0.8 0.6 0.5 0.3 Btu/h = Capacity. kW = Input Power. GPM = Water Flow in gpm. PSI = Water Pressure Drop through condenser in psi Rated Conditions: 20° F Superheat, 5° F Subcooling, 60 Hz operation, 105° F Condensing, 75° F Entering Water (30° ITD). For 20° ITD (ITD = condensing temperature - entering water temperature) allow 3 gpm/ton water flow. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical CLEW28 Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI Btu/h kW GPM PSI -5 Btu/h 8997 1.83 1.1 0.9 13,331 2.71 2.0 2.3 23,349 4.61 2.1 0.7 29,158 5.83 2.9 1.0 43,900 8.46 5.6 1.9 57,245 10.58 7.7 2.3 K-63 Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 21 8.0 9.9 15.1 19.6 20.5 27.6 26.8 37.5 38.4 48.3 57.1 62.5 11.0 17.0 22.0 23.0 38.0 43.0 15 15 25 35 35 50 45 60 60 80 100 110 20 25 35 40 50 60 3.1 4.0 6.3 8.0 10.8 13.4 13.4 20.5 19.6 24.1 26.8 32.1 4.5 5.3 10.0 12.0 17.0 22.0 (460/3/60MFS) 15 15 15 15 15 20 20 35 35 40 45 50 15 15 15 20 25 35 *Voltage Code. MCA = Minimum Circuit Amps MFS = Maximum Fuse Size CMW/CMEW/CLW/CLEW WATER COOLED CONDENSING UNITS DIMENSIONS (in) CONNECTIONS (in) COMPRESSOR APPROX L W H Mounting Mounting Liquid(Flare) Suction(ODS) Water(FPT) MODEL SHIPPING WT CentersML CentersMW (lb) CM(E)W18* MT(Z)18JA 135 24 18 15-3/4 22 16 3/8 5/8 3/8 CM(E)W22* MT(Z)22JC 140 24 18 15-3/4 22 16 3/8 5/8 3/8 CM(E)W28* MT(Z)28JE 140 24 18 15-3/4 22 16 3/8 7/8 1/2 CM(E)W36* MT(Z)36JG 140 25-1/4 21 22 23-1/4 19 1/2 7/8 1/2 CM(E)W50* MT(Z)50HK 190 25-1/4 21 22 23-1/4 19 1/2 7/8 3/4 CM(E)W64* MT(Z)64HM 190 25-1/4 21 22 23-1/4 19 1/2 7/8 3/4 CM(E)W72* MT(Z)72HN 195 25-1/4 21 22 23-1/4 19 1/2 1-1/8 3/4 CM(E)W80* MT(Z)80HP 195 25-1/4 21 22 23-1/4 19 1/2 1-1/8 3/4 CM(E)W100* MT(Z)100HS 290 31-1/2 28-3/8 25 30-1/2 26-3/8 1/2 1-1/8 1 CM(E)W125* MT(Z)125HU 290 31-1/2 28-3/8 25 30-1/2 26-3/8 1/2 1-1/8 1 CM(E)W144* MT(Z)144HV 290 31-1/2 28-3/8 25 30-1/2 26-3/8 1/2 1-1/8 1 CM(E)W160* MT(Z)160HW 290 31-1/2 28-3/8 25 30-1/2 26-3/8 1/2 1-1/8 1 CL(E)W22* LT(Z)22JE 140 24 18 15-3/4 22 16 3/8 5/8 3/8 CL(E)W28* LT(Z)28JH 140 24 18 15-3/4 22 16 3/8 7/8 3/8 CL(E)W44* LT(Z)44HM 180 25-1/4 21 19-1/2 23-1/4 19 1/2 7/8 1/2 CL(E)W50* LT(Z)50HP 190 25-1/4 21 22 23-1/4 19 1/2 7/8 1/2 CL(E)W88* LT(Z)88HU 270 31-1/2 28-3/8 25 30-1/2 26-3/8 1/2 1-1/8 3/4 CL(E)W100* LT(Z)100HW 290 31-1/2 28-3/8 25 30-1/2 26-3/8 1/2 1-1/8 3/4 *Voltage Code. ML = distance between mounting holes on “L” side. MW = distance between mounting holes on “W” side. CONDENSING UNIT MODEL 10.0 10.0 10.0 10.0 16.0 16.0 16.0 16.0 26.0 26.0 26.0 26.0 10.0 10.0 16.0 16.0 26.0 26.0 Tools & Instruments NOTE: CMT(E)W indicates CMTW or CMTEW. CLT(E) indicates CLTW or CLTEW. RECEIVER CAPACITY(lb @ 90%) Motors 20 25 40 45 50 80 80 80 ----25 40 60 60 --- (460/3/60MCA) Electrical 11.6 15.1 22.4 26.8 33.0 47.4 47.4 47.4 ----17.0 26.0 34.0 37.0 --- VOLTAGE CODE (208-230/3/60MCA) (208-230/3/60MFS) Heating Components (208-230/1/60MFS) Indoor Air Quality (208-230/1/60MCA) Thermostats COMPRESSOR MODEL MT(Z)18JA MT(Z)22JC MT(Z)28JE MT(Z)36JG MT(Z)50HK MT(Z)64HM MT(Z)72HN MT(Z)80HP MT(Z)100HS MT(Z)125HU MT(Z)144HV MT(Z)160HW LT(Z)22JE LT(Z)28JH LT(Z)44HM LT(Z)50HP LT(Z)88HU LT(Z)100HW K-64 Refrigeration CONDENSING UNIT MODEL CM(E)W18* CM(E)W22* CM(E)W28* CM(E)W36* CM(E)W50* CM(E)W64* CM(E)W72* CM(E)W80* CM(E)W100* CM(E)W125* CM(E)W144* CM(E)W160* CL(E)W22* CL(E)W28* CL(E)W44* CL(E)W50* CL(E)W88* CL(E)W100* Oils & Chemicals CMW/CMEW/CLW/CLEW WATER COOLED CONDENSING UNITS Accessories, Supplies & Commodities DANFOSS-MANEUROP Compressors, Chillers, Condensers Refrigeration Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 22 DANFOSS-MANEUROP CONDENSING UNIT SPECIFICATIONS (cont) Water Cooled Condensing Unit Accessories Water Cooled Condensers Part No Description L x W x H (in.) 7402501 7402503 7402504 7402505 7402506 7402510 7402511 7402512 Condenser Only Condenser Only Condenser Only Condenser Only Condenser Only Condenser Only Condenser Only Condenser Only Low Temp CLW = R-502; CLEW = R-404A/R CMW CMW CMW CMW CMW CMW CMW CMW CMW CMW CMW CMW CLW CLW CLW CLW CLW CL CMEW CMEW CMEW CMEW CMEW CMEW CMEW CMEW CMEW CMEW CMEW CMEW CLEW CLEW CLEW CLEW CLEW CLE 18 22 28 36 50 64 72 80 100 125 144 160 22 28 44 50 88 10 X X X X X X X X X X X X X X X X X X Medium Temp: CMW = R-22; CMEW = R-134a Water Valves Part No 6804532 6804531 6804530 6804546 Description Medium Temp: CMW = R-22; CMEW = R-134a 3/8-in.Danfoss WVFX 10 1/2-in.Danfoss WVFX 15 3/4-in.Danfoss WVFX 20 1-in.Danfoss WVFX 25 X X X X X X X X Refrigeration X X X X Low Temp CLW = R-502; CLEW = R-404A/R X X X X X X Receivers Part No 6808517 6808507* 6808510* 6804527 Description Medium Temp: CMW = R-22; CMEW = R-134a Receiver 5x12 Receiver 6x18 Receiver 8-5/8x18 Receiver Value 1-in. Rx 1 / 2 in. SAE(*required) X X X X X X X X X X X X X X X X X X X X X Low Temp CLW = R-502; CLEW = R-404A/R X X X X X X X X X Run Capacitors Part No 7304533 7304519 7304522 7304523 7304528 Description Low Temp CLW = R-502; CLEW = R-404A/R Medium Temp: CMW = R-22; CMEW = R-134a 25 MFG 440 VAC 35 MFG 440 VAC 45 MFG 440 VAC 55 MFG 440 VAC 50 MFG 440 VAC X X X X X X X X X X X Pre-wired Start Relay and Capacitor Assembly Low Temp: CLW = R-502; CLEW = R-404A/R Medium Temp: CMW=R-22; CMEW=R-134a Part No 7305548 7305541 Description All Units Except Ones Using MT(Z) 18-1 For Units Using MT(Z) 18-1 CMW CMW CMW CMW CMW CMW CMW CMW CMW CMW CMW CMW CLW CLW CLW CLW CLW CLW CMEW CMEW CMEW CMEW CMEW CMEW CMEW CMEW CMEW CMEW CMEW CMEW CLEW CLEW CLEW CLEW CLEW CLEW 88 50 100 44 28 22 160 144 125 100 80 72 64 50 36 28 22 18 X X X X X X X X Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-65 X X X X X X X X X X X X Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 23 RECIPROCATING COMPRESSORS RECIPROCATING COMPRESSORS — TYPE MT/MTZ Heating Components Electrical INTRODUCTION Maneurop reciprocating compressors are designed for residential and light commercial air conditioning applications as well as refrigeration applications. Thanks to the very large internal volume, large oil sump, the sturdy design of compressor parts and its 100% suction gas cooled motor, the Maneurop reciprocating compressor has proven its ability to withstand the most harsh conditions where other compressors may fail. Motors DANFOSS-MANEUROP Compressors, Chillers, Condensers Refrigeration K-66 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Serial Number Nomenclature Format: AB CC DDDDDDD Where A = year built, B = month built, CC = Factory code, DDDDDDD = Serial number Example: MC 10 5264747 = compressor built in March 2001 at Trevoux factory Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 24 DANFOSS-MANEUROP RECIPROCATING COMPRESSORS RECIPROCATING COMPRESSORS — TYPE MT/MTZ(cont) PART NO MT/MTZ18 MT/MTZ22 MT/MTZ28 MT/MTZ32 MT/MTZ36 MT/MTZ40 MT/MTZ44 MT/MTZ50 MT/MTZ56 MT/MTZ64 MT/MTZ72 MT/MTZ80 MT/MTZ100 MT/MTZ125 MT/MTZ144 MT/MTZ160 MT-R 22 AVAILABLE DISCHARGE SUCTION HP LRA kW Btuh MOTOR CONN(in) CONN(in) CODES* 1,3,4 1 1 1.5 51 1.74 15,900 1,3,4 1 1-1/4 2 49.3 2.27 22,000 1,3,4 1 1-1/4 2.5 81 3.07 30,200 1,3,4 1 1-1/4 2.75 84 3.58 33,000 1,3,4 1 1-1/4 3 84 4.05 38,000 1,3,4 1 1-1/4 3.5 99 4.63 42,900 1,3,4 1-1/4 1-3/4 4 97 4.67 45,200 1,3,4 1-1/4 1-3/4 4.5 114 5.18 50,500 1,3,4,7 1-1/4 1 5 146 6.05 56,400 1,3,4 1-1/4 1-3/4 5.5 148 6.8 64,800 3,4 1-1/4 1-3/4 6 135 7.58 70,100 3,4 1-1/4 1-3/4 7 140 8.56 80,000 3,4,7 1-1/4 1-3/4 9 157 9.59 95,900 3,4,7 1-1/4 1-3/4 10 210 12.81 124,600 3,4,7 1-1/4 1-3/4 12 259 14.36 140,700 3,4,7 1-1/4 1-3/4 13.5 259 16.09 156,800 EER kW 9.15 9.68 9.86 9.22 9.38 9.27 9.69 9.74 9.32 9.53 9.26 9.35 10 9.73 9.8 9.75 1.67 2.17 2.83 3.21 3.75 4.33 4.37 4.96 5.67 6.36 7.22 8.24 9.9 12.62 14.47 16.67 Code 1 3 4 7 15,300 19,600 25,100 28,400 32,700 37,400 43,000 48,100 54,300 60,400 67,900 76,900 94,400 122,100 137,200 155,100 kW MTZ-R 134a Btuh EER 9.13 1.22 9 1.54 8.9 2.04 8.86 2.39 8.73 2.75 8.64 3.08 9.84 3.14 9.71 3.6 9.59 3.95 9.5 4.68 9.41 5.19 9.33 6 9.53 6.5 9.67 7.72 9.48 9.82 9.31 10.92 11,200 14,800 19,300 20,900 24,500 27,900 29,800 34,500 38,000 45,300 50,000 56,500 63,900 78,900 96,900 107,600 LEGEND LRA — Locked Rotor Amps MCC — Maximum Continuous Current (A) NOTES: Ratings at ARI conditions for R-134a/R-22/R-407C: 45°F evap, 130°F cond, 15°F subcooling, 20°F superheat. Ratings at ARI conditions for R-404A/R-507: 20°F evap, 120°F cond, 15°F subcooling, 20°F superheat Accessories, Supplies & Commodities K-67 MTZ-R 404A/507A kW Btuh EER MCC SHIP WT(lb) 9.2 1.76 10,300 9.63 2.05 14,100 9.42 2.68 18,300 8.76 2.99 20,100 8.91 3.34 23,200 9.03 3.77 26,400 9.51 4.18 27,800 9.57 4.83 32,500 9.62 5.44 36,500 9.66 6.12 41,500 9.63 6.91 46,500 9.42 8.03 52,500 9.84 8.72 60,800 10.22 11.37 78,400 9.87 13 92,300 9.85 14.74 100,300 Description 208-230V / 1ph / 60Hz 200-230V / 3ph / 60Hz 460V / 3ph / 60Hz 575V / 3ph / 60hz Tools & Instruments Refrigeration MTZ-R 407C Btuh EER *Motor Codes: Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration 5.1 13 6.01 17 5.96 25 5.85 26.5 6.05 30 6.11 34 6.65 31 6.73 36 6.71 46 6.78 53 6.72 31 6.54 36 6.07 43 6 54 6.19 64 5.93 70 50 50 55 60 60 60 85 85 90 90 90 90 145 150 155 165 Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 25 DANFOSS-MANEUROP RECIPROCATING COMPRESSORS RECIPROCATING COMPRESSORS — TYPE MT/MTZ(contt) Reciprocating Compressor Accessories Part No 18 22 28 32 36 COMPRESSOR TYPES AND SIZES Type MT / MTZ 40 44 50 56 64 72 80 100 125 144 160 22 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Description Type LT / LTZ 28 44 50 88 100 X X X X X X X X X X X X Compressors, Chillers, Condensers Refrigeration X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Type LT / LTZ X X X X X X X X Rotolock Solder Sleeves (non standard sizes) Part No 8153012 8153003 Description 1-1/4 in. R x 7/8 in. S 1-3/4 in. R x 1-3/8 in. S X X X X X Type MT / MTZ X X X X X X X X X X X X X X X X X X X X X X X X X Type MT / MTZ X X X X X X X X X X X X X X X X X X X X X X X X X Rotoluck Nuts Part No A104174P01 A104174P02 A104174P03 Description 1-1/4 in. Rotolock Nut 1-3/4 in. Rotolock Nut 1in. Rotolock Nut X X Type LT / LTZ X X X X X X X X X Type LT / LTZ X X X X Electrical X X X X X X X Heating Components Rotolock 1 in, R x 3/8 in. S Rotolock 1 in, R x 1/2 in. S Rotolock 1-1/4 in. R x 5/8 in. S Rotolock 1-1/4 in. R x 5/8 in. S Rotolock 1-1/4in.Rx7/8in.S Rotolock 1-3/4in.Rx7/8in.S Rotolock 1-3/4in.Rx1-1/8in.S Rotolock 1-3/4in.Rx1-3/8in.S Complete Teflon Gasket Kit Motors Rotolock valves 6804500 6804501 6804502 6804503 6804504 6804505 6804506 6804010 8156009 X X X X X X X X X X X X X X X X Crankcase Heaters Part No PTC Description 35 watt,200-600 volt X X X X X X Type MT / MTZ X X X X X X X X X X X Type LT / LTZ X X X X X X X X X X X Type MT / MTZ X X X X X X X X X X X Type LT / LTZ X X X X X X X X X X X Type LT / LTZ X X X X X Oil Sight Glass Part No 6204001 Description Oil sight glass(all models) Acoustic Hoods Type MT / MTZ X X X X X X X X X X X Accessories, Supplies & Commodities Description Acoustic Hoods Acoustic Hoods Acoustic Hoods Tools & Instruments Part No 7755001 7755002 7755003 Thermostats X X X Oils & Chemicals Type MT / MTZ X X K-68 Refrigeration Part No Description 5710058P01 Mounting kids include mounting grommets, 5710058P02 5710058P03 sleeves, nuts bolts washers, also included are solder 5710058P04 5710058P05 sleeves, te on gaskets and installation instructions Indoor Air Quality Installation / Mounting Kits (* some mounting kits are voltage specific) Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 26 DANFOSS-MANEUROP RECIPROCATING COMPRESSORS RECIPROCATING COMPRESSORS — TYPE LT/LTZ PART NO R-404A/R-507A LTZ R-502 LT –10° F Evap –30° F Evap –10° F Evap –30° F Evap Kw Btuh Kw Btuh Kw Btuh Kw Btuh 2 1-1/4 1.75 5,230 1.16 2,950 1.81 5,925 1.2 2.5 1-1/4 2.58 7,890 1.7 4,510 2.71 9,805 1.8 4 1-3/4 4.37 13,520 3.1 7,540 4.02 16,051 2.75 4.5 1-3/4 5.46 17,470 3.93 10,360 5.33 19,027 3.65 7.5 1-3/4 8.32 26,860 5.86 14,440 7.74 29,427 5.3 9 1-3/4 10.56 35,480 7.23 19,930 10.32 38,911 7.25 AVAILABLE MOTOR HP CODES* LT/LTZ22 LT/LTZ28 LT/LTZ44 LT/LTZ50 LT/LTZ88 LT/LTZ100 1,3,4 1,3,4 1,3,4 1,3,4 3,4 3,4 Code 1 3 4 LRA 2,720 5,385 7,820 10,420 16,000 22,615 49.3 81 103 143 157 210 Description 208-230V / 1ph / 60Hz 200-230V / 3ph / 60Hz 460V / 3ph / 60Hz LEGEND LRA — Locked Rotor Amps MCC — Maximum Continuous Current (A) *Rated Condition: R-404A/R-507, –10°F Evap, 130°F Cond, 15°F subcooling, 20°F superheat. **Rated Condition: R-404A/R-507, –30°F Evap, 120°F Cond, 15°F subcooling, 20°F superheat Thermostats Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments Refrigeration MCC *Motor Codes Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-69 DISCHARGE SUCTION SHIP WT CONN. CONN. (lb) (in.) (in.) 17 25 34 37 43 54 1 1 1-1/4 1-1/4 1-1/4 1-1/4 50 50 80 85 140 150 Sec#10b Refrigeration27pages_Fridge 12/9/2010 11:57 AM Page 27 1/4 to 5 1/2 1/4 to 5 1/2 8 to 20 1/3 to 5 Air 8 to 20 Conditioning 1/2 to 12 and 1/2 to 12 Refrigeration 11 and 14 14 and 18 22 to 45 55 70 and 85 100 10 to 40 50 to 70 Constant 1/2 to 5 Pressure Electrically 1 to 20 Driven 1/4 to 4 Ultra-Low 3/4 to 8 Temp De-Superheating ½ to 7 ½ ½ to 7 ½ ½ to 7 ½ 12 to 20 AA AN AAC ANC AFA BA BN C HFK HF HF EXT TI TF TL TCL TJL TJR TER TIR THR TMR TRAE+ TRAE ACP X X X X X X X X X X X X X X X X X X X X X X X ESVB EX2 ZZ X LA LCL X X X X X Connections Configuration Port SAE ODF Angle Straight Conventional Balanced X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Motors 1 ¼ to 5 1 ¼ to 5 1 ¼ to 5 1 ¼ to 5 Field Servic -able Thermostats 1/4 to 5 1/4 to 5 1/4 to 5 1/4 to 5 1/4 to 5 1/2 to 6 1/2 to 6 Style Hermetic Replaceable Power Element X X X X X X X X X X X Electrical Nominal Capacity Valve Adjustable Internal Check R-22 R-410A Family Superheat Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Charge Code Selector K-70 Refrigeration Application Heating Components Quick Select Guide Indoor Air Quality EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE QUICK SELECTION GUIDE Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 1 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE A-SERIES 410A The A-series is used for heat pump, air conditioning, food services and commercial applications. Features • Stainless steel power element eliminates corrosion and prev ents valve failure • Herm etic, leak-free construction • Compact size allows installation in limited spaces • Mass spectrom eter tested to ensure less than 0.10 oz/year external leakage rate Options Specifications • ZW195 charge available for R-410A systems Maximum working pressure: • Adjustable or non-adjustable superheat UL/CUL file number: • SAE or ODF connections standard – Chatleff or Aeroquip are available • External or internal equalizer • Internal check valve allows reverse flow for heat pum p applications, eliminating the need for external piping and external check valve • Bleed type pressure equalization to accomm odate PSC type com pressors • Pressure limiting charges (MOP) available Nomenclature example: AACEB 2 HC 30 IN 3/8 x 1/2 ODF ANG A A Valve Superheat Series Adjustment Hermetic A= Design Adjustable N = NonAdjustable C E B 2 H Refrigeration C 30 IN 3/8 x 1/2 700 psig SA 5312 ODF ANG Internal Equalizer Bleed Capacity Refrigerant Charge Code Capillary Inlet x Connection Configuration Check Hole Nominal Code Tube Outlet Type Valve E=External (optional) Rating in +F = R-12 C = medium Length Connection S/T = straight(optional) Tons • H = R-22 temp Sizes SAE=flare thru Reverse (Omit for (Omit for +M = R-134a CA = heat 30 IN ODF = ANG = 90° Flow Internal) no bleed (See • N = R-407C pump & 1/4 x 3/8 solder angle Bypass hole) nominal *P = R-507 W(MOP) = 5 FT (std) 3/8 x 1/2 Chatleff Applicacapacity *R = R-502 press. limiting 1/2 x 5/8 (optional) tion table *S = R-404A Z = low temp 5/8 x 7/8 Aeroquip below) Z = R-410A AA = wide (optional) range + = R-12 and R-134a are interchangeable refrigerant charges * = R-507, R-502 and R-404A are interchangeable refrigerant charges • = R-22 and R-407C are interchangeable refrigerant charges AA/AN Series – Nominal* Capacity Table in Tons (kW) R-12 – 1/8 (0.4) 1/4 (0.9) 1/2 (1.8) 1 (3.5) – 1½ (5.3) 2 (7.0) 2½ (9.0) 3 (11.0) R-134a 1/8 (0.4) 1/4 (0.9) 1/2 (1.8) 3/4 (2.7) 1 (3.5) 1½ (5.3) 2 (7.0) 2½ (9.0) 3 (11.0) 4 (14.0) R-22 1/5 (0.7) 1/4 (0.9) 1/2 (1.8) 1 (3.5) 1½ (5.3) 2 (7.0) 2½ (8.8) 3 (11.0) 4 (14.0) 5 (17.0) R-410A – 1/4 (0.9) 1/2 (1.8) 1 (3.5) 1½ (5.3) 2 (7.0) 3 (11.0) 4 (14.0) 5 (17.0) – R-502 – 1/8 (0.4) 1/4 (0.9) 1/2 (1.8) 1 (3.5) – 1½ (5.3) 2 (7.0) 2½ (8.8) 3 (11.0) R-507/R-404A 1/8 (0.4) 1/4 (0.9) 1/2 (1.8) 3/4 1 (3.5) 1¼ (4.4) 2 (7.0) 2¼ (8.0) 2½ (8.8) 3½ (12.0) All capacities shown are at 100°F condensing, 40°F evaporator temperature. *See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750. Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-71 R-407C 1/5 1/4 (0.9) 1/2 (1.8) 1 (3.5) 1¼ (4.4) 2 (7.0) 2½ (8.8) 3¼ (11.5) 4 (14.0) 5¼ (19.0) Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 2 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE A-SERIES ANCE SAE Dimensional Data A B 1.67 1.75 1.67 1.75 Connection Size Inlet Outlet A± .002 B± .002 C MIN 1/4 ODF 3/8 ODF 0.25 0.38 0.32 3/8 ODF 3/8 ODF 0.38 0.38 0.32 3/8 ODF 1/2 ODF 0.38 0.50 0.32 1/2 ODF 1/2 ODF 0.50 0.50 0.38 1/2 ODF 5/8 ODF 0.63 0.61 0.38 D MIN 0.32 0.32 0.38 0.38 0.50 E 1.70 1.70 1.73 1.73 1.75 F 1.73 1.73 1.73 1.73 1.75 D MIN 0.32 0.32 0.38 0.38 0.50 E 1.70 1.70 1.73 1.73 1.75 F 1.73 1.73 1.73 1.73 1.75 Oils & Chemicals B 1.67 1.75 Accessories, Supplies & Commodities A 1.67 1.75 Tools & Instruments Connection Size Inlet Outlet 3/8 SAE 3/8 SAE 1/2 SAE 1/2 SAE K-72 Refrigeration AACE SAE Dimensional Data Connection Size Inlet Outlet A± .002 B± .002 C MIN 1/4 ODF 3/8 ODF 0.25 0.38 0.32 3/8 ODF 3/8 ODF 0.38 0.38 0.32 3/8 ODF 1/2 ODF 0.38 0.50 0.32 1/2 ODF 1/2 ODF 0.50 0.50 0.38 1/2 ODF 5/8 ODF 0.63 0.61 0.38 Thermostats AACE ODF Dimensional Data Indoor Air Quality Heating Components Electrical Motors Connection Size Inlet Outlet 3/8 SAE 3/8 SAE 1/2 SAE 1/2 SAE ANCE ODF Dimensional Data Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 3 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE A-SERIES Without Internal Check Valve Ordering Information Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Refrigerant R-410A R-410A R-410A R-410A R-410A R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-404A R-507 R-502 Series Tons* Charge AAE AAE AAE AAE AAE AA AA AA AA AAE AAE AA AA AA AA AA AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAEB AAEB AAEB AAEB AA 3 3 3 5 5 1/4 1/2 1/2 1/2 1/2 1 1/4 1/4 1/2 1/2 1/2 1/2 1/2 1/2 1 1 1 1-1/2 2 2 2-1/2 2-1/2 2-1/2 3 3 3 3 4 4 4 5 5 5 5 5 5 5 3 4 5 5 1/4 ZW195 ZW195 ZW195 ZW195 ZW195 MC MC MC MZ MC MC HC HC HC HC HC HC HC HC HC HC HC HC HC HCA HAA HAA HCA HC HC HCA HCA HC HCA HCA HAA HAA HC HC HCA HCA HW100 HCA HCA HCA HCA SW45 Connections Cap Tube PCN 3/8 X 3/8 ODF S/T 3/8 X 1/2 ODF S/T CHATLEFF 1/2 X 5/8 ODF S/T CHATLEFF 1/4 X 1/2 ODF S/T 1/4 X 3/8 SAE S/T 1/4 X 1/2 ODF S/T 1/4 X 3/8 SAE S/T 1/4 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/4 X 3/8 ODF S/T 1/4 X 1/2 ODF S/T 1/4 X 1/2 ODF S/T 3/8 X 3/8 ODF S/T 3/8 X 1/2 SAE S/T 1/4 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE ST 1/4 X 3/8 ODF ST 1/4 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T CHATLEFF 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE S/T 3/8 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T CHATLEFF 1/2 X 5/8 ODF S/T 5/8 X 7/8 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 1/2 X 5/8 SAE S/T 1/4 X 3/8 ODF S/T 30 IN 30 IN 30 IN 30 IN 30 IN 5 FT 30 IN 5 FT 30 IN 5 FT 5 FT 5 FT 5 FT 5 FT 30 IN 5 FT 5 FT 5 FT 5 FT 30 IN 5 FT 5 FT 5 FT 5 FT 30 IN 30 IN 30 IN 30 IN 5 FT 5 FT 30 IN 30 IN 5 FT 30 IN 30 IN 30 IN 30 IN 5 FT 30 IN 30 IN 30 IN 5 FT 30 IN 30 IN 30 IN 30 IN 5 FT 064595 065579 015776 065580 015794 065623 058985 065624 058986 065630 065631 056315 055932 065626 056547 057828 065632 065633 057987 059582 065634 065635 064424 064425 049632 063648 013938 049633 062376 056686 049634 060643 061960 049638 061247 063649 013939 059565 061805 054024 059683 062088 059603 059605 059607 061243 065676 Chatleff Gasket Kit – KG 10045 (PCN: 066031) * For interchangeable refrigerant charges R-134a/R-12, R-404A/R-507/R-502, and R-22/R-407C, the tons of capacity shown in the table are for the first (primary) refrigerant listed. Consult the Nominal Capacity Table for determining the tons of capacity for the secondary refrigerants listed. Example: A 1/4 ton R-12 valve is required. W hat R-134a ton valve should be selected? Solution: From the Nominal Capacity Table, a 1/2 ton R-134a valve is equivalent to a 1/4 ton R-12 valve. K-73 Refrigerant Series Tons* Charge R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-532 AA AA AA AA AA AA AA AA AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE AAE 1/4 1/4 1/2 1/2 1/2 1/2 3/4 3/4 1/2 1/2 1/2 1/2 3/4 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 2 2 2 2-1/4 2-1/4 2-1/4 2-1/2 2-1/2 3 3 SC SZ SC SW45 SZ SZ SW45 SZ SC SW45 SW45 SZ SC SC SW45 SZ SC SW45 SZ SW45 SZ SC SW45 SZ SW45 SZ SC SW45 SZ SW45 SZ Connections Cap Tube PCN 1/4 X 1/2 ODF S/T 1/4 X 3/8 ODF S/T 1/4 X 1/2 ODF S/T 1/4 X 1/2 ODF S/T 1/4 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/4 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 30 IN 5 FT 30 IN 5 FT 5 FT 30 IN 30 FT 30 IN 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 30 IN 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 063503 065675 063504 065685 065682 063925 065686 065149 066085 065636 065688 065687 066086 066087 065637 065183 066081 066079 066080 065698 065697 065330 065690 065689 066082 066083 066084 065148 065691 065693 065692 With Internal Check Valve Refrigerant Series Tons* Charge Connections Cap Tube PCN R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C AACE AACE AACE AACE AACE AACE AACE AACE AACE AACE AACEB AACEB AACEB AACEB AACEB AACE AACE AACE AACE AACE AACE AACE AACE AACE AACE AACE AACEB AACEB AACEB AACEB 1-1/2 1-1/2 2 2 3 3 4 4 5 5 1-1/2 2 3 4 5 1-1/2 1-1/2 2 2-1/2 2-1/2 3 3 4 5 5 5 1-1/2 2 3 4 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 HCA HCA HCA HAA HAA HCA HCA HCA HAA HAA HCA HCA HCA HCA HCA 3/8 X 1/2 ODF S/T CHATLEFF 3/8 X 1/2 ODF S/T CHATLEFF 3/8 X 1/2 ODF S/T CHATLEFF 3/8 X 1/2 ODF S/T CHATLEFF 1/2 X 5/8 ODF S/T CHATLEFF 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T CHATLEFF 3/8 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T CHATLEFF 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 5/8 ODF S/T 5 FT 30 IN 5 FT 30 IN 5 FT 30 IN 5 FT 30 IN 5 FT 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 5 FT 5 FT 5 FT 30 IN 30 IN 5 FT 5 FT 5 FT 30 IN 30 IN 5 FT 30 IN 30 IN 30 IN 30 IN 065871 016432 065872 016615 065873 015795 065874 016433 065875 015796 065946 065942 065943 065944 065945 058923 065796 065865 064102 014091 065868 065797 065869 064103 014092 065870 065842 065959 065941 065844 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 4 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE AFA(E)-SERIES H C Valve Superheat Equalizer Capacity Refrigerant Code Series Adjustment Nominal +F = R-12 Hermetic A= E=External Rating • H = R-22 Design, Adjustable in Tons +M = R-134a Flare (Omit for • N = R-407C Connections Internal) (See *P = R-507 nominal capacity *R = R-502 *S = R-404A table Z = R-410A below) 5FT 3/8 x 1/2 SAE ANG Capillary Inlet x Outlet Connection Configuration Tube Connection Type C = medium temp Length Sizes ANG = 90° 30 IN CA = heat pump SAE=flare angle & W(MOP) = press. 1/4 x 3/8 5 FT (std) 3/8 x 1/2 limiting Z = low temp AA = wide range Charge Code Indoor Air Quality + = R-12 and R-134a are interchangeable refrigerant charges, * = R-507, R-502 and R-404A are interchangeable refrigerant charges, • = R-22 and R-407C are interchangeable refrigerant charges AFA Series – Nominal* Capacity Table in Tons (kW) R-134a 1/8 (0.4) 1/4 (0.9) 1/2 (1.8) 3/4 (2.7) 1 (3.5) 1½ (5.3) 2 (7.0) 2½ (9.0) 3 (11.0) 4 (14.0) R-22 1/5 (0.7) 1/4 (0.9) 1/2 (1.8) 1 (3.5) 1½ (5.3) 2 (7.0) 2½ (9.0) 3 (11.0) – 5 (17.0) R-502 – 1/8 (0.4) 1/4 (0.9) 1/2 (1.8) 1 (3.5) – 1½ (5.3) 2 (7.0) – 3 (11.0) R-507/R-404A 1/8 (0.4) 1/4 (0.9) 1/2 (1.8) 3/4 (2.7) 1 (3.5) 1¼ (4.4) 2 (7.0) 2¼ (8.0) 2½ (9.0) 3½ (12.0) R-407C 1/5 (0.7) 1/4 (0.9) 1/2 (1.8) 1 (3.5) 1¼ (4.4) 2 (7.0) 2½ (9.0) 3¼ (11.5) 4 (14.0) 5¼ (19.0) Thermostats R-12 – 1/8 (0.4) 1/4 (0.9) 1/2 (1.8) 1 (3.5) – 1½ (5.3) 2 (7.0) – 3 (11.0) All capacities shown are at 100°F condensing, 40°F evaporator temperature. *See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750. Dimensional Data Inlet 1/4 SAE elbow 3/8 SAE elbow AFA(E) Connections (in) Outlet A 3/8 SAE 1/2 SAE 1.56 5/8 SAE 3/8 – 1/2 SAE 3/8 SAE 1/2 SAE 5/8 SAE 3/8 – 1/2 SAE B 1.31 1.47 C 1.64 1.35 1.98 1.73 1.34 1.36 1.98 1.73 Tools & Instruments Remote Bulb Tubing Length 30” or 5’ Standard Electrical 1/2 Heating Components E Oils & Chemicals A K-74 Refrigeration AF 700 psig SA 5312 Accessories, Supplies & Commodities Features • Stainless steel power element eliminates corrosion and Options prevents valve failure • External or internal equalizer • External superheat adjustm ent Specifications • Replaceable inlet strainer • Maximum working pressure: • SAE connections only • UL/CUL file num ber: • Wrench flats on inlet and outlet Nomenclature example: AFAE 1/2 HC 5 FT 3/8 x 1/2 SAE ANG Motors The AFA series is designed f or air conditioning and commercial refrigeration applications requiring angle conf iguration SAE connections. The AFA is ideal f or those applications requiring com pact size com bined with stable and accurate control over wide load and ev aporator tem perature ranges. Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 5 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE AFA(E)-SERIES Ordering Information Internally Equalized Refrigerant Series Tons* Charge Connections Cap Tube PCN R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-404A R-507 R-502 AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA 1/4 1/4 1/4 1/2 1/2 1/2 1/2 1 1 1/4 1/4 1/2 1/2 1/4 1/4 1/2 1 1 1-1/2 2 1/4 FC FC FC FC FC FC FC FC FC MC MC MC MC HC HZ HC HC HZ HC HC SC 1/4 X 3/8 SAE 1/4 X 3/8 SAE 3/8 X 3/8 SAE 1/4 X 3/8 SAE 1/4 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 1/4 X 3/8 SAE 1/4 x 1/2 SAE 1/4 x 1/2 SAE 3/8 X 1/2 SAE 1/4 x 1/2 SAE 1/4 X 3/8-1/2 SAE 1/4 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 3/8-1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE 1/4 x 1/2 SAE 5 FT 30 IN 5 FT 5 FT 30 IN 5 FT 30 IN 5 FT 30 IN 5 FT 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 5 FT 5 FT 5 FT 5 FT 5 FT 047753 057047 054258 047752 057028 054226 057027 047758 057029 058536 057607 057606 059625 057261 059575 057260 054231 057555 054232 054233 064072 Refrigerant Series Tons* Charge Connections Cap Tube PCN R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE 1/4 1/2 1/2 1 1-1/2 2 3 1/2 1 1-1/2 1-1/2 2 3 3 5 5 1 1 1-1/2 1-1/2 2 2 MC MC MC MC MC MC MC HC HC HC HZ HZ HC HZ HC HZ SC SZ SC SZ SC SZ 3/8 X 3/8 SAE 1/4 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 1/2 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 1/4 X 3/8 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 3/8 SAE 3/8 X 1/2 SAE 3/8 X 3/8 SAE 3/8 X 1/2 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 30 IN 5 FT 30 IN 5 FT 30 IN 5 FT 063898 057853 061904 057613 060865 061906 061908 054243 054246 054247 057950 057951 054249 057556 054250 058484 061912 063464 063702 063465 061914 061646 Externally Equalized * For interchangeable refrigerant charges R-134a/R-12, R-404A/R-507/R-502, and R-22/R-407C, the tons of capacity shown in the table are for the first (primary) refrigerant listed. Consult the Nominal Capacity Table for determining the tons of capacity for the secondary refrigerants listed. Example: A 1/4 ton R-12 valve is required. What R-134a ton valve should be selected? Solution: From the Nominal Capacity Table, a 1/2 ton R-134a valve is equivalent to a 1/4 ton R-12 valve. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-75 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 6 Cap Tube PCN 1/4 X 3/8 SAE 1/4 X 3/8 SAE 3/8 X 3/8 SAE 1/4 X 3/8 SAE 1/4 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 1/4 X 3/8 SAE 1/4 x 1/2 SAE 1/4 x 1/2 SAE 3/8 X 1/2 SAE 1/4 x 1/2 SAE 1/4 X 3/8-1/2 SAE 1/4 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 3/8-1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE 1/4 x 1/2 SAE 5 FT 30 IN 5 FT 5 FT 30 IN 5 FT 30 IN 5 FT 30 IN 5 FT 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 5 FT 5 FT 5 FT 5 FT 5 FT 047753 057047 054258 047752 057028 054226 057027 047758 057029 058536 057607 057606 059625 057261 059575 057260 054231 057555 054232 054233 064072 Refrigerant Series Tons* Charge Connections Cap Tube PCN R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE AFAE 1/4 1/2 1/2 1 1-1/2 2 3 1/2 1 1-1/2 1-1/2 2 3 3 5 5 1 1 1-1/2 1-1/2 2 2 MC MC MC MC MC MC MC HC HC HC HZ HZ HC HZ HC HZ SC SZ SC SZ SC SZ 3/8 X 3/8 SAE 1/4 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 1/2 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 1/4 X 3/8 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 3/8 SAE 3/8 X 1/2 SAE 3/8 X 3/8 SAE 3/8 X 1/2 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 3/8 X 3/8 SAE 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 30 IN 5 FT 30 IN 5 FT 30 IN 5 FT 063898 057853 061904 057613 060865 061906 061908 054243 054246 054247 057950 057951 054249 057556 054250 058484 061912 063464 063702 063465 061914 061646 Externally Equalized K-76 Refrigeration Tools & Instruments * For interchangeable refrigerant charges R-134a/R-12, R-404A/R-507/R-502, and R-22/R-407C, the tons of capacity shown in the table are for the first (primary) refrigerant listed. Consult the Nominal Capacity Table for determining the tons of capacity for the secondary refrigerants listed. Example: A 1/4 ton R-12 valve is required. What R-134a ton valve should be selected? Solution: From the Nominal Capacity Table, a 1/2 ton R-134a valve is equivalent to a 1/4 ton R-12 valve. Motors Connections FC FC FC FC FC FC FC FC FC MC MC MC MC HC HZ HC HC HZ HC HC SC Electrical Charge 1/4 1/4 1/4 1/2 1/2 1/2 1/2 1 1 1/4 1/4 1/2 1/2 1/4 1/4 1/2 1 1 1-1/2 2 1/4 Heating Components Tons* AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA AFA Indoor Air Quality Series R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-404A R-507 R-502 Thermostats Refrigerant Oils & Chemicals Internally Equalized Accessories, Supplies & Commodities EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE AFA(E)-SERIES Ordering Information Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 5:27 PM Page 7 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE BA/BN SERIES-410A The BA/BN series is a balanced ported valve. Typical applications include: refrigerated cases, coolers, freezers, ice machines and air conditioning systems. BA/BN valves operate over widely varying operating conditions. Features • Stainless steel power element eliminates corrosion and prevents valve failure • Hermetic, leak-free construction • Compact size allows installation in limited spaces • Bi-Flow capability allows one v alve to control the superheat in both cooling and heating modes for heat pump applications • Balanced port construction compensates for changes in operating pressures due to varying ambient, gas defrost, heat reclaim, or widely varying evaporator loads Specifications • Maximum working pressure: 700 psig B Accessories, Supplies & Commodities A E B Valve Series 1/2 Superheat Equalizer Bleed Hole Capacity Adjustment (optional) Nominal A = Adjustable E=External Rating (Omit for in Tons Hermetic N = Non(Omit for no Balanced Adjustable Internal) bleed (See Port hole) nominal Design capacity table below) H CA Refrigerant Code +F = R-12 • H = R-22 +M = R-134a • N = R-407C *P = R-507 *R = R-502 *S = R-404A Z = R-410A 5 FT 3/8 x 1/2 ODF S/T Charge Code Capillary Inlet x Outlet Connection Configuration Tube Connection Type C = medium Length Sizes S/T = straight-thru temp SAE=flare CA = heat 30 IN 1/4 x 3/8 ANG = 90° angle pump & 3/8 x 1/2 ODF = solder W(MOP) = 5 FT (std) 1/2 x 5/8 press. 5/8 x 7/8 limiting Z = low temp + = R-12 and R-134a are interchangeable refrigerant charges * = R-507, R-502 and R-404A are interchangeable refrigerant charges • = R-22 and R-407C are interchangeable refrigerant charges BA/BN Series – Nominal* Capacity Table in Tons (kW) R-12 1/4 (0.9) 1/2 (1.8) 1 (3.5) 1¼ (4.4) 1½ (5.3) 2 (7.0) 2½ (9.0) 3 (11.0) 3½ (12.0) R-134a 1/2 (1.8) 3/4 1 (3.5) 1½ (5.3) 2 (7.0) 2¼ (8.0) 3 (11.0) 3½ (12.0) 3½ (12.0) R-22/R-407C 1/2 (1.8) 1 (3.5) 1½ (5.3) 2 (7.0) 2½ (9.0) 3 (11.0) 4 (14.0) 5 (17.0) 6 (21.0) R-410A 1/2 (1.8) 1 (3.5) 1½ (5.3) 2 (7.0) 3 (11.0) 3½ (12.0) 4½ (16.0) 6 (21.0) 7½ (26.0) [[[ All capacities shown are at 100°F condensing, 40°F evaporator temperature. *See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750 Tools & Instruments Refrigeration Options • ZW195 charge available f or R-410A systems • External or internal equalizer • Bleed type pressure equalization available to accommodate PSC type compressors • SAE or ODF connections standard – Chatleff or Aeroquip are available • Adjustable or non-adjustable superheat Nomenclature example: BAEB 1/2 HCA 5 FT 3/8 x 1/2 ODF S/T Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-77 R-502/R-404A/R-507 1/4 (0.9) 1/2 (1.8) 1 (3.5) 1¼ (4.4) 1½ (5.3) 2 (7.0) 2½ (9.0) 3 (11.0) 4 (14.0) Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 8 BA/BN Dimensional Data (in) BAE A B C MIN D MIN E F 0.25 0.38 0.38 0.50 0.50 0.63 0.63 0.38 0.38 0.50 0.50 0.63 0.61 0.88 0.31 0.32 0.32 0.41 0.41 0.50 0.50 0.32 0.32 0.41 0.41 0.50 0.50 0.62 1.70 1.73 1.73 1.73 1.73 1.75 1.75 1.73 1.73 1.73 1.73 1.75 1.75 1.73 B C MIN D MIN E F 0.25 0.38 0.38 0.50 0.50 0.63 0.63 0.38 0.38 0.50 0.50 0.63 0.61 0.88 0.31 0.32 0.32 0.41 0.41 0.50 0.50 0.32 0.32 0.41 0.41 0.50 0.50 0.62 1.70 1.73 1.73 1.73 1.73 1.75 1.75 1.73 1.73 1.73 1.73 1.75 1.75 1.73 Remote Bulb Tubing Length 30” or 5’ Standard Accessories, Supplies & Commodities Diameter 0.75 0.50 0.50 0.50 Tools & Instruments BA(E) & BN(E) Remote Bulb Dimensions Refrigerant Charge Length HCA, HAA 2.31 MC, MZ, MW (MOP), RW (MOP) 2.09 RC, SC, SZ, SW (MOP), 2.09 PC, PZ, PW (MOP) 2.09 Oils & Chemicals Thermostats A K-78 Refrigeration Connection Size Inlet Outlet 1/4 ODF 3/8 ODF 3/8 ODF 3/8 ODF 3/8 ODF 1/2 ODF 1/2 ODF 1/2 ODF 1/2 ODF 5/8 ODF 5/8 ODF 5/8 ODF 5/8 ODF 7/8 ODF Indoor Air Quality BN(E) Dimensional Data (in) Heating Components Electrical Connection Size Inlet Outlet 1/4 ODF 3/8 ODF 3/8 ODF 3/8 ODF 3/8 ODF 1/2 ODF 1/2 ODF 1/2 ODF 1/2 ODF 5/8 ODF 5/8 ODF 5/8 ODF 5/8 ODF 7/8 ODF Motors EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE BA/BN SERIES Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 9 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE BA/BN SERIES Ordering Information Refrigerant Series Tons* Charge Connections Cap Tube PCN R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C BAE BAE BAE BAE BAE BAE BAEB BAEB BAEB BAEB BAEB BAEB BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BAE BNE BNE BNE BNE BNE BNE BAEB BAEB BAEB BAEB BAEB BAEB BAEB BAEB BAEB BAEB BAEB BAEB BAEB 1-1/2 2 3 4-1/2 6 7-1/2 1-1/2 2 3 4-1/2 6 6 3/4 1 1-1/2 2 3 1 1-1/2 1-1/2 2 2 2-1/2 2-1/2 2-1/2 3 3 3 4 4 4 4 5 5 5 5 5 6 6 3 3 4 4 5 5 1-1/2 1-1/2 2 3 3 3 4 4 5 5 6 6 6 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 ZW195 MC MC MC MC MC HCA HCA HW100 HCA HCA HCA HCA HW100 HCA HCA HW100 HCA HCA HCA HW100 HCA HCA HCA HCA HW100 HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA HCA 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 3/8 ODF S/T 5/8 X 7/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 3/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 5/8 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 5/8 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 3/8 X 3/8 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 1/2 X 5/8 ODF S/T 5/8 X 5/8 ODF S/T 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 5 FT 30 IN 30 IN 30 IN 30 IN 5 FT 30 IN 30 IN 30 IN 5 FT 30 IN 5 FT 5 FT 5 FT 5 FT 30 IN 5 FT 5 FT 5 FT 5 FT 30 IN 30 IN 5 FT 5 FT 30 IN 30 IN 30 IN 30 IN 30 IN 5 FT 30 IN 5 FT 5 FT 30 IN 30 IN 5 FT 5 FT 065876 065877 065878 065880 065586 066088 065336 065337 065338 065339 065340 065978 062754 061967 063129 062830 063201 063200 061954 062831 061955 063018 061956 061962 062616 061957 063019 062372 061958 061963 063020 062373 062839 062852 061964 062838 062374 062853 062736 064166 062289 063132 061971 062290 065226 062789 063006 062790 061968 063015 063348 063939 063010 061980 063128 063940 064805 065977 * For interchangeable refrigerant charges R-134a/R-12, R-404A/R-507/R-502, and R-22/R-407C, the tons of capacity shown in the table are for the first (primary) refrigerant listed. Consult the Nominal Capacity Table for determining the tons of capacity for the secondary refrigerants listed. Example: A 1/4 ton R-12 valve is required. What R-134a ton valve should be selected? Solution: From the Nominal Capacity Table, a 1/2 ton R-134a valve is equivalent to a 1/4 ton R-12 valve. K-79 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 10 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE B SERIES w/Strainer The B-series with strainer series is a balanced ported valve. Typical applications include: refrigerated cases, coolers, freezers, ice machines and air conditioning systems that operate ov er widely varying operating conditions. This valve series also features a removable inlet strainer. Electrical Nomenclature example: BAESB 1/2 HC 5 FT 3/8 x 1/2 ODF B 1/2 H CA 5 FT 3/8 x 1/2 Bleed Capacity Refrigerant Charge Code Capillary Inlet x Valve Superheat Equalizer Strainer Hole Tube C = medium temp Outlet Nominal Series Adjustment Code E=External Removable (optional) Rating A= +F = R-12 CA = heat pump Length Connection Inlet Sizes in Tons Hermetic Adjustable • H = R-22 W(MOP) = press. Screen (Omit for (Omit for 30 IN (std) limiting Balanced +M = R-134a no bleed Internal) N = Non& 1/4 x 3/8 (See Port • N = R-407C Z = low temp hole) 5 FT (std) 3/8 x 1/2 nominal *P = R-507 Design Adjustable 1/2 x 5/8 capacity *R = R-502 5/8 x 7/8 table *S = R-404A below) ODF Connection Type ODF = solder + = R-12 and R-134a are interchangeable refrigerant charges * = R-507, R-502 and R-404A are interchangeable refrigerant charges • = R-22 and R-407C are interchangeable refrigerant charges B Series with Strainer – Nominal* Capacity Table in Tons (kW) R-12 1/4 (0.9) 1/2 (1.8) 1 (3.5) 1¼ (4.4) 1½ (5.3) 2 (7.0) 2½ (9.0) 3 (11.0) 3½ (12.0) R-134a 1/2 (1.8) 3/4 1 (3.5) 1½ (5.3) 2 (7.0) 2¼ (8.0) 3 (11.0) 3½ (12.0) 4¼ (15.0) R-22/R-407C 1/2 (1.8) 1 (3.5) 1½ (5.3) 2 (7.0) 2½ (9.0) 3 (11.0) 4 (14.0) 5 (17.0) 6 (21.0) R-502/R-507/R-404A 1/4 (0.9) 1/2 (1.8) 1 (3.5) 1¼ (4.4) 1½ (5.3) 2 (7.0) 2½ (9.0) 3 (11.0) 4 (14.0) Tools & Instruments All capacities shown are at 100°F condensing, 40°F evaporator temperature. *See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750. Indoor Air Quality S Thermostats E Oils & Chemicals A Accessories, Supplies & Commodities B Heating Components Specifications • Maximum Working Pressure: 450 psig K-80 Refrigeration Options • Adjustable and non-adjustable configurations • Ratings from 1/2 to 6 tons Motors Features • Stainless steel power element eliminates corrosion and prevents valve f ailure • Removable inlet strainer assembly • Balanced port design compensates for changes in operating pressures due to varying ambients or widely varying evaporator loads • Hermetic, leak-free construction • Solid copper ODF connections, angle style only Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 11 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE B SERIES w/Strainer BAES/BNES Dimensional Data (in) ODF Connections, Angle Style Only Connection Size Inlet Outlet 1/4 ODF 3/8 ODF 1/4 ODF 1/2 ODF 1/4 ODF 5/8 ODF 3/8 ODF 3/8 ODF 3/8 ODF 1/2 ODF 3/8 ODF 5/8 ODF 3/8 ODF 7/8 ODF 1/2 ODF 1/2 ODF 1/2 ODF 5/8 ODF 1/2 ODF 7/8 ODF A B C MIN D MIN E 0.25 0.25 0.25 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.38 0.50 0.63 0.38 0.50 0.63 0.88 0.50 0.63 0.88 0.31 0.31 0.31 0.32 0.32 0.32 0.32 0.41 0.41 0.41 0.32 0.41 0.50 0.32 0.41 0.50 0.62 0.41 0.50 0.62 1.73 1.73 1.75 1.73 1.73 1.75 1.73 1.73 1.75 1.73 Remote Bulb Tubing Length 30” or 5’ Standard BAES & BNES Remote Bulb Dimensions Refrigerant Charge Diameter HCA, NCA, HAA 0.75 MC, MZ, MW (MOP), 0.50 RW (MOP) RC, SC, SZ SW (MOP), PC, PZ, PW (MOP) Length 2.38 2.13 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-81 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 12 Connections Cap Tube PCN MC MC MC MC MC MC HC HC HC HC HC HC HC HC HC SC SZ SC SZ SC SZ SC SZ SC SZ SC SZ SC SZ SC SZ SC SZ 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 30 IN 064244 064245 064246 064247 064248 064250 064235 064236 064237 064238 064239 064240 064241 064242 064243 064137 064295 064138 064144 064139 064145 064140 064146 064141 064273 064142 064537 064280 064434 064281 064538 064460 064780 K-82 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals * For interchangeable refrigerant charges R-134a/R-12, R-404A/R-507/R-502, and R-22/R-407C, the tons of capacity shown in the table are for the first (primary) refrigerant listed. Consult the Nominal Capacity Table for determining the tons of capacity for the secondary refrigerants listed. Example: A 1/4 ton R-12 valve is required. What R-134a ton valve should be selected? Solution: From the Nominal Capacity Table, a 1/2 ton R-134a valve is equivalent to a 1/4 ton R-12 valve. Motors Charge 1/2 3/4 1 1-1/2 2 3 1/2 1 1-1/2 2 2-1/2 3 4 5 6 1/4 1/4 1/2 1/2 1 1 1-1/4 1-1/4 1-1/2 1-1/2 2 2 2-1/2 2-1/2 3 3 4 4 Electrical Tons* BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES BAES Heating Components Series Indoor Air Quality Refrigerant R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 Thermostats EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE B SERIES w/Strainer Ordering Information (BAES Only) Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 13 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE C SERIES R-410A The C series is a balanced ported valve designed for high efficiency R-410A air-conditioning and heat pump applications. C valves operate over widely varying operating conditions. Features • Precision superheat control optimized for R-410 A systems • Stainless steel power element eliminates corrosion and prevents valve failure • Laser etched identification markings for permanent legibility • Hermetic, leak-free construction of all joints • Compact size allows installation in limited spaces • Bi-Flow capability allows one valve to control the superheat in both cooling and heating modes for close- Options coupled or packaged heat pump applications • High flow internal check valve allows reverse flow for • Balance port construction compensates for changes in heat pump applications, eliminating the need for operating pressures due to varying ambients, gas defrost, external check valve and improving overall system heat recalim, or widely varying evaporator loads efficiency • External equalizer is standard • Adjustable or non-adjustable superheat • Screens on ODF inlet connections • Bleed type pressure equalization available to Specifications accommodate PSC type compressors • Maximum working pressure (MWP): 700 psig • ODF connections are standard - Chatleff, Aeroquip, or • R-410A operating range: -20°F to +50°F SAE connections are available • UL/CUL file number: SA 5312 • External equalizer 1/8” tube with 45° end cut is standard - terminations are available Nomenclature example: CA 24K ZAA B15% C Valve Series A Body Type A = Adjustable, With Check, Straight-Through B = Adjustable, No Check, Straight-Through C = Non-Adjustable, With Check, Straight-Through D = Non-Adjustable, No Check, Straight-Through E = Non-Adjustable, With Check, 90° Angle F = Non-Adjustable, No Check, 90° Angle 24K Capacity 18K = 1-1/2 Ton 24K = 2 Ton 36K = 3 Ton 48K = 4 Ton 60K = 5 Ton 72K = 6 Ton 84K = 7 Ton Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-83 ZAA Charge R-410A B15% Bleed % (optional) Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 14 Refrigeration Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE C SERIES 410A External Equalizer PCN 3/8 ODF x 1/2 ODF 3/8 ODF x 1/2 ODF Chatleff x Chatleff 3/8 ODF x 1/2 ODF 3/8 ODF x 1/2 ODF 3/8 ODF x 1/2 ODF 3/8 ODF x 1/2 ODF Chatleff x Chatleff 3/8 ODF x 1/2 ODF 3/8 ODF x 1/2 ODF 3/8 ODF x 1/2 ODF 3/8 ODF x 1/2 ODF Chatleff x Chatleff 3/8 ODF x 1/2 ODF 3/8 ODF x 1/2 ODF 3/8 ODF x 1/2 ODF 3/8 ODF x 1/2 ODF Chatleff x Chatleff 3/8 ODF x 1/2 ODF 3/8 ODF x 1/2 ODF 1/2 ODF x 5/8 ODF 1/2 ODF x 5/8 ODF Chatleff x Chatleff 1/2 ODF x 5/8 ODF 1/2 ODF x 5/8 ODF 1/2 ODF x 5/8 ODF 1/2 ODF x 5/8 ODF Chatleff x Chatleff 1/2 ODF x 5/8 ODF 1/2 ODF x 5/8 ODF 5/8 ODF x 7/8 ODF 5/8 ODF x 7/8 ODF Chatleff x Chatleff 5/8 ODF x 7/8 ODF 5/8 ODF x 7/8 ODF 1/4 ODF 1/4 ODF 5 ft With 1/4 SAE Flare Nut 1/4 ODF 1/4 ODF 1/4 ODF 1/4 ODF 5 ft With 1/4 SAE Flare Nut 1/4 ODF 1/4 ODF 1/4 ODF 1/4 ODF 5 ft With 1/4 SAE Flare Nut 1/4 ODF 1/4 ODF 1/4 ODF 1/4 ODF 5 ft With 1/4 SAE Flare Nut 1/4 ODF 1/4 ODF 1/4 ODF 1/4 ODF 5 ft With 1/4 SAE Flare Nut 1/4 ODF 1/4 ODF 1/4 ODF 1/4 ODF 5 ft With 1/4 SAE Flare Nut 1/4 ODF 1/4 ODF 1/4 ODF 1/4 ODF 5 ft With 1/4 SAE Flare Nut 1/4 ODF 1/4 ODF 093078 093007 093014 093021 093082 093072 093008 093015 093022 093083 093073 093009 093016 093023 093084 093074 093010 093017 093024 093081 093075 093011 093018 093025 093085 093076 093012 093019 093026 093079 093077 093013 093020 093027 093080 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes C-Series Dimensional Data (in) Connections Dimension B C 1.65 0.379 1.65 0.504 2.15 0.629 2.15 0.879 1.36 1.30 - D 0.34 0.48 0.75 0.75 - Tools & Instruments Accessories, Supplies & Commodities 3/8 ODF 1/2 ODF 5/8 ODF 7/8 ODF Chatleff Aeroquip A 1.65 1.65 2.15 2.15 1.80 1.71 K-84 Refrigeration Yes Yes Yes Electrical Inlet x Outlet 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% Heating Components Bleed Yes Yes Yes Indoor Air Quality Check Valve 1-1/2 (18K) 1-1/2 (18K) 1-1/2 (18K) 1-1/2 (18K) 1-1/2 (18K) 2 (24K) 2 (24K) 2 (24K) 2 (24K) 2 (24K) 3 (36K) 3 (36K) 3 (36K) 3 (36K) 3 (36K) 4 (48K) 4 (48K) 4 (48K) 4 (48K) 4 (48K) 5 (60K) 5 (60K) 5 (60K) 5 (60K) 5 (60K) 6 (72K) 6 (72K) 6 (72K) 6 (72K) 6 (72K) 7 (84K) 7 (84K) 7 (84K) 7 (84K) 7 (84K) Thermostats Tons (Btuh) R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A Oils & Chemicals Refrigerant Motors Ordering Information Adjustable, straight-through body style, individually packaged, 5 ft. remote bulb capillary tube Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 15 Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE HF/HFK SERIES The HF series is a balanced ported valve designed for refrigeration, air conditioning and heat pump applications. Features • Stainless steel replaceable power element eliminates corrosion and prevents valve failure • Two body sizes provide capacities from 1/4 to 20 tons Standard Body – HF & HFK • The HF is offered several ways: – Pre-packaged HFK service kits – Include a mix of bodies and power elements with a complete set of cages to serve the most applications with a minimum of parts – Individual components – Bodies, cages, & power elements may be ordered separately – Finished valves – Assembled valves ready for immediate installation • Bi-Flow capability up to 5-1/2 tons R-22 allows one valve to control the superheat in both cooling and heating modes Options Extended Body – HF • ODF or SAE connections • Capacity range from 8 to 20 tons (R-22) • Straight-through or angle flow • Finished valve only configurations • Removable inlet strainer (ODF only) NOTE: If the HF body is stamped HFK, then the cage is • Internal or external equalizer replaceable. Oils & Chemicals Thermostats Indoor Air Quality Nomenclature example: HFESC 2 HC 5 FT 3/8 x 1/2 ODF S/T HF N E Valve Superheat EqualiSeries Adjustment zer N = NonAdjustable E=Exter -nal Balanced Port (Omit Design for Omit for Adjustable Internal) S Conne ction Type S= Solder (Omit for SAE Flare) C B Removable Bleed Inlet Hole Strainer (optional) (optional) C = Inlet Strainer (ODF only) Omit for no bleed hole) 2 Capacity Nominal Rating in Tons (See nominal capacity table below) Specifications • Maximum working pressure: 450 psig H C 5FT Charge Code Capillary Refrigerant Code Tube Length C = medium +F = R-12 temp • H = R-22 +M = R-134a CA = heat pump 5 FT (std) W(MOP) = • N = Rpress. 407C limiting * P = R-507 Z = low temp * R = R-502 * S = RAA = wide range 404A 3/8 x 1/2 ODF Inlet x Outlet Connect Connection -ion Sizes Type 1/4 x 3/8 3/8 x 1/2 SAE = flare ODF = solder S/T Configuration ANG = 90° angle S/T = straight-thru + = R-12 and R-134a are interchangeable refrigerant charges * = R-507, R-502 and R-404A are interchangeable refrigerant charges • = R-22 and R-407C are interchangeable refrigerant charges HF Series-Nominal* Capacity Tables in Tons (kW) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Standard Body HF R-12 1/8 (0.4) 1/4 (0.9) 1/2 (1.8) 1 (3.5) – 1 1/2 (5.3) 2 (7.0) 3 1/2 (12.0) R-134a 1/4 (0.9) 1/2 (1.8) 3/4 (2.7) 1 (3.5) 1 1/2 (5.3) 1 3/4 (6.2) 2 1/2 (8.8) 4 (14.0) R-22/R-407C 1/4 (0.9) 1/2 (1.8) 1 (3.5) 1 1/2 (5.3) 2 (7.0) 2 1/2 (8.8) 3 (11.0) 5 1/2 (20.0) R-502/R- 404A/R-507 1/8 (0.4) 1/4 (0.9) 1/2 (1.8) 1 (3.5) – 1 1/2 (5.3) 2 (7.0) 3 1/2 (12.0) R-134a 6(21.0) 7 1/2 (27.0) 11 (39.0) 14 (50.0) R-22/R-407C 8 (28.0) 10 (35.0) 15 (53.0) 20 (70.0) R-502/R- 404A/R-507 5 (17.0) 7 (27.0) 10 (35.0) 13 (46.0) Extended Body HF R-12 5 (17.0) 6 (21.0) 9 (32.0) 12 (42.0) All capacities shown are at 100°F condensing, 40°F evaporator temperature. *See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750. K-85 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 16 Refrigeration Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE HF/HFK SERIES Dimensional Data Standard Body HF HF SAE A B C 3.11 2.72 1.27 1.27 1.83 1.83 Extended Body HF HF ODF A± .002 B± .002 C MIN D MIN E F 0.25 0.25 0.38 0.38 0.50 0.50 0.31 0.31 0.37 0.31 0.37 0.37 2.50 2.50 2.50 2.50 2.50 2.50 K-86 Refrigeration Tools & Instruments Connection Size Inlet Outlet 1/4 ODF 3/8 ODF 3/8 ODF 1/2 ODF 3/8 ODF 1/2 ODF Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Connection Size Inlet Outlet 1/4 SAE 1/2 SAE 3/8 SAE 1/2 SAE Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 17 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE HF/HFK SERIES Ordering Information Use the following tables to order individual components. HFK Body Selection Table Electrical Motors Compressors, Chillers, Condensers Refrigeration PCN Type Connections (Inlet x Outlet) Description 064881 064882 064883 064884 064885 064886 064887 064888 064889 064890 064891 064892 064895 064896 HFK HFK HFKE HFKE HFKSC HFKESC HFKS HFKS HFKS HFKS HFKES HFKES HFKES HFKES 1/4 x 1/2 SAE Ang Inlet 3/8 x 1/2 SAE Ang Inlet 1/4 x 1/2 SAE Ang Inlet 3/8 x 1/2 SAE Ang Inlet 3/8 x 1/2 ODF Ang Inlet w/ Strainer 3/8 x 1/2 ODF Ang Inlet w/ Strainer 3/8 x 1/2 ODF S/T 3/8 x 5/8 ODF S/T 1/2 x 5/8 ODF S/T 1/2 x 7/8 ODF S/T 3/8 x 1/2 ODF S/T 3/8 x 5/8 ODF S/T 1/2 x 5/8 ODF S/T 1/2 x 7/8 ODF S/T KT-20298-1 KT-20298-2 KT-20298-3 KT-20298-4 KT-20298-5 KT-20298-6 KT-20298-7 KT-20298-8 KT-20298-9 KT-20298-10 KT-20298-11 KT-20298-12 KT-20298-13 KT-20298-14 PCN System Refrigerant(s) Application Description 053769 054798 063869 053766 053763 058074 053767 057834 057764 053764 058085 058082 058083 R-134a/R-12 R-134a/R-12 R-134a/R-12 R-134a/R-12 R-134a/R-12 R-134a R-22/R-407C R-22/R-407C R-22/R-407C R-22/R-407C R-404/ R-507/ R-502 R-404/ R-507/ R-502 R-404/ R-507/ R-502 Low Temp MOP Low Temp MOP Low Temp MOP Low Temp Medium Temp Medium Temp Low Temp Heat Pump AC MOP A/C Med. Temp Low Temp MOP Low Temp Medium Temp X26300-FW15-1 X26300-FW35-1 X26300-FW55-1 X26300-FZ-1 X26300-FC-1 X26300-MC-1 X26300-HZ-1 X26300-HCA-1 X26300-HW100-1 X26300-HC-1 X26300-SW45-1 X26300-SZ-1 X26300-SC-1 HFK Cage Nominal* Capacity Table Oils & Chemicals Thermostats Indoor Air Quality Heating Components HF & HFK Power Element Table PCN Cage Code R-12 R-22 R-134a R-404 R-507 R-502 R-407C 064868 064869 064870 064871 064872 064873 064874 064875 0 1 2 3 4 5 6 7 ǩ ¼ ½ 1 1¼ 1½ 2 3½ ¼ ½ 1 1½ 2 2½ 3 5½ ¼ ½ ¾ 1 1½ 1¾ 2½ 4 ǩ ¼ ½ 1 1¼ 1½ 2 3½ ǩ ¼ ½ 1 1¼ 1½ 2 3½ ǩ ¼ ½ 1 1¼ 1½ 2 3½ ¼ ½ 1 1½ 2 2½ 3 5½ Refrigeration Tools & Instruments Accessories, Supplies & Commodities 1 Cage Kit includes Cage, Insertion Tool and ID Clips. *All capacities shown are at 100°F condensing, 40°F evaporator temperature. See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750. Cage Kit (PCN 064879) Item Size 0 Cage (1/4 ton R-22) Size 1 Cage (1/2 ton R-22) Size 2 Cage (1 ton R-22) Size 3 Cage (1 1/2 ton R-22) Size 4 Cage (2 ton R-22) Size 5 Cage (2 1/2 ton R-22) Size 6 Cage (3 ton R-22) Size 7 Cage (5 1/2 ton R-22) Insertion Tool Oil Bottle Cage ID Tags Qty 2 2 2 2 2 2 2 2 1 1 16 K-87 KT-20299-0 KT-20299-1 KT-20299-2 KT-20299-3 KT-20299-4 KT-20299-5 KT-20299-6 KT-20299-7 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 18 Part Number PCN Description X-11176-1 27676-1 027385 058707 Filter Screen Seal Cap Replacement Parts- HFSC & HFESC Only PCN Kit Number Description 057686 KT-20264 Includes seal cap, gasket o-ring, screen, spring HFK Accessories Description 064880 064897 064898 064899 065203 Service Box Cage Box (Empty) Insertion Tool Oil Bottle Cage Gasket Kit (12 sets) K-88 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components PCN Motors Replacement Parts – SAE Inlet Electrical EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE HF/HFK SERIES Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 19 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE HF/HFK SERIES HFK Pre-Packaged Kits Ordering Information The HFK is a pre-packaged kit consisting of a mix of popular bodies and power elements with a complete selection of cages. These kits provide great flexibility allowing valves to be assembled as needed for each application. Three kits are provided as shown below, along with the cage kit which s included in each prepackaged kit. In addition, custom kits can be assembled by stocking an empty kit case with desired components. SAE/ODF Kit (PCN 065135) Item Qty HFK 3/8 x 1/2 SAE ANG 1 HFKE 3/8 x 1/2 SAE ANG 1 HFKS 3/8 x 1/2 ODF S/T 1 SAE Kit (PCN 064876) Item Qty HFK 1/4 X ½ Body 1 HFK 3/8 X ½ Body 1 HFKE 3/8 X ½ Body 2 HFKES 3/8 x 1/2 ODF S/T Cage Kit (PCN 064879) Insertion Tool (PCN 065219) Service Box (PCN 064880) FC Power Element 1 1 1 FC Power Element 2 HC Power Element 1 HZ Power Element 1 1 1 SZ Power Element Cage Kit (PCN 064879) FZ Power Element HC Power Element HZ Power Element SC Power Element SW45 Power Element 1 1 1 1 1 2 1 ODF Kit (PCN 064877) Item HFKSC 3/8 X ½ Body HFKES 3/8 X ½ Body HFKESC 3/8 X ½ Body FC Power Element HC Power Element HZ Power Element Oils & Chemicals Accessories, Supplies & Commodities Item Size 0 Cage (1/4 ton R-22) Size 1 Cage (1/2 ton R-22) Size 2 Cage (1 ton R-22) 1. Remove adjusting stem assembly from body with 15/16” wrench. 4. Replace adjustment stem assembly to body and hand tighten. Use the 15/16” wrench to tighten adjustment stem assembly 60° or one wrench fl at. (300-360 inch lbs. - Do not overtighten) 2. Lubricate both o-rings on cage. 5. Attach cage identifcation clip on power element cap tube. K-89 Qty 2 2 2 2 1 1 Size 3 Cage (1 1/2 ton R-22) Size 4 Cage (2 ton R-22) Size 5 Cage (2 1/2 ton R-22) 2 2 2 2 1 Size 6 Cage (3 ton R-22) Size 7 Cage (5 1/2 ton R-22) 2 2 Insertion Tool Oil Bottle Cage ID Tags 1 1 16 HFK Assembly Procedure (see 6 assembly steps & diagrams below) Tools & Instruments Refrigeration Cage Kit (PCN 064879) Qty 1 1 2 SZ Power Element Cage Kit (PCN 064879) Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration 3. Insert cage into body with driver and insertion tool and hand tighten. (Do not over-tighten) 6. Screw power element to top of valve body and hand tighten. Use the 1” wrench to tighten power element 60° or one wrench fl at. (300-360 inch lbs. - Do not over- tighten) Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 5:17 PM Page 20 009811 054134 009810 056063 056013 054966 054892 056119 057619 054914 053060 058545 057618 058100 057620 065641 058430 055493 055633 054921 059653 056169 009812 054723 054136 054135 054364 055702 055928 054927 054928 055969 056018 054933 054939 054940 054947 053316 053915 065643 059304 055490 054137 055792 056228 054369 054964 055874 056008 054965 054976 054905 055785 054977 054984 054986 053061 055936 K-90 Motors PCN 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT Electrical Cap Tube 1/4 X 1/2 SAE ANG 3/8 X 1/2 SAE ANG 1/4 X 1/2 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE ANG 3/8 X 1/2 SAE ANG 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 SAE ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE ANG 3/8 X 1/2 ODF S/T 1/4 X 1/2 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 1/4 X 1/2 SAE ANG 3/8 X 1/2 ODF S/T 1/4 X 1/2 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE ANG 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 1/4 X 1/2 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 SAE 1/4 X 3/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE Heating Components Connections FC FC FC FC FC FC FC FC FC FC FC MC MC MC MC MC HC HC HC HC HZ HZ HC HC HC HC HZ HC HC HC HZ HC HC HC HC HZ HC HC HC SC RC RC RC RZ RZ RZ RC RZ RZ RZ RC RC RZ RZ RC RZ RC RC Indoor Air Quality Charge 1/4 1/4 1/2 1/2 1/2 1/2 1/2 1 1 1-1/2 2 1/4 1/4 1/2 1/2 1 1/4 1/4 1/4 1/4 1/4 1/4 1/2 1/2 1/2 1/2 1/2 1 1 1 1 1-1/2 1-1/2 1-1/2 2 2 2-1/2 3 3 1 1/4 1/4 1/4 1/4 1/4 1/4 1/2 1/2 1/2 1/2 1 1 1 1 1-1/2 1-1/2 2 3-1/2 Thermostats Tons* HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF HF Oils & Chemicals Series R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-404A R-507 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 Accessories, Supplies & Commodities Refrigerant Tools & Instruments HF Series - Internally Equalized Ordering Information Use the following tables to order factory assembled valves. Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Refrigeration EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE HF/HFK SERIES Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 21 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE HF/HFK SERIES HF Series – Externally Equalized (continued) Ordering Information (continued) Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Refrigerant Series Tons* Charge Connections Cap Tube PCN R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE 1/4 1/2 1/2 1/2 1/2 1 1 1 1-1/2 1-1/2 2 2 3-1/2 1/2 1/2 3/4 3/4 1 1 1 1-1/2 1-3/4 1-3/4 1-3/4 4 6 11 11 14 1/4 1/4 1/4 1/2 1/2 1/2 1/2 1/2 1/2 1 1 1 1 1 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 FC FC FC FC FC FC FC FC FC FC FC FC FC MC MC MC MC MC MC MC MC MC MC MC MC MC MC MC MC HC HC HZ HC HC HC HC HZ HZ HC HC HC HW 35 HZ HC HC HC HZ HZ HC HC HC HZ HC HC HC HC HC HC HC HCA 3/8 X 1/2 SAE ANG 1/4 X 1/2 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 SAE ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE ANG 3/8 X 1/2 SAE ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE ANG 3/8 X 1/2 SAE ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE ANG 38 X 1/2 ODF ANG 5/8 X 7/8 ODF S/T 5/8 X 7/8 ODF S/T 7/8 X 1 1/8 ODF S/T 7/8 X 1 3/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE 1/4 X 1/2 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE ANG 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 1/2 X 5/8 ODF ANG 3/8 X 1/2 ODF S/T 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 054360 009955 056021 056331 054895 055993 056151 054909 055994 054917 053266 053069 054138 065645 057616 057784 059422 058546 065646 057617 057895 065647 058152 057896 057897 057903 057906 058681 064000 055927 054924 054925 059079 054838 055827 054361 055889 054365 055494 055708 054930 054932 054931 055495 055863 054936 055870 054937 055706 054942 054946 054943 056042 055931 054950 054756 053916 053317 064761 058648 K-91 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 22 061730 055924 053191 054141 054140 054778 055187 054779 065649 057378 054780 054777 057312 057313 056818 056819 057315 057256 057316 056820 056821 062737 057317 057318 056824 056823 056825 062055 058490 065734 065733 058976 065736 058995 065735 065650 059086 065651 064289 058977 057976 065737 057974 065738 064290 057958 065740 065739 065652 062151 061694 064170 058451 064291 064195 062828 K-92 Motors PCN 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT Electrical Cap Tube 1/2 X 5/8 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 1/2 X 5/8 ODF ANG 1/2 X 7/8 ODF S/T 5/8 X 7/8 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 5/8 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 1/2 X 5/8 ODF S/T 5/8 X 1 1/8 ODF S/T 1/2 X 7/8 ODF S/T 5/8 X 1 1/8 ODF S/T 1/2 X 5/8 ODF S/T 5/8 X 7/8 ODF S/T 7/8 X 1 1/8 ODF S/T 5/8 X 7/8 ODF S/T 5/8 X 1 1/8 ODF S/T 5/8 X 1 1/8 ODF S/T 5/8 X 7/8 ODF S/T 7/8 X 1 1/8 ODF S/T 5/8 X 1 1/8 ODF S/T 5/8 X 7/8 ODF S/T 7/8 X 1 1/8 ODF S/T 7/8 X 1 1/8 ODF S/T 7/8 X 1 1/8 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF S/T 5/8 X 7/8 ODF S/T 1/2 X 5/8 ODF S/T 5/8 X 7/8 ODF S/T 5/8 X 7/8 ODF S/T 5/8 X 7/8 ODF S/T 5/8 X 7/8 ODF S/T 5/8 X 7/8 ODF S/T Heating Components Connections HCA HZ HZ HC HC HC HC HC HCA HCA HZ HZ HC HC HCA HCA HC HC HC HCA HCA HC HC HC HCA HCA HCA HC HCA SW 45 SZ SC SW 45 SZ SZ SC SW 45 SW 45 SZ SC SW 45 SZ SC SW 45 SZ SC SW 45 SZ SC SC SZ SW 45 SZ SZ SW 45 SZ Indoor Air Quality Charge 3 3 3 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 5-1/2 8 8 8 8 10 10 10 10 10 12 15 15 15 15 15 20 20 1/4 1/4 1/2 1/2 1/2 1/2 1 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 2 2 2 3-1/2 3-1/2 3-1/2 5 5 7 10 10 Thermostats Tons* HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE Oils & Chemicals Series Accessories, Supplies & Commodities Refrigerant R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 Tools & Instruments HF Series – Externally Equalized (continued) Ordering Information (continued) Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Refrigeration EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE HF/HFK SERIES Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 23 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE HF/HFK SERIES HF Series – Externally Equalized (continued) Ordering Information (continued) Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Refrigerant Series Tons* Charge Connections Cap Tube PCN R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE HFE 1/4 1/4 1/4 1/4 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1 1 1 1 1 1 1 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2 2 2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 5 5 5 5 7 7 10 RC RC RZ RZ RC RC RC RW 45 RW 45 RZ RZ RZ RC RC RC RW 45 RZ RZ RZ RC RC RC RW 45 RW 45 RW 45 RZ RZ RC RC RC RW 45 RZ RZ RZ RC RC RC RW 45 RZ RZ RZ RC RC RW 45 RZ RC RW 45 RC 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 SAE 3/8 X 1/2 ODF S/T 3/8 X 1/2 ODF ANG 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF S/T 3/8 X 1/2 SAE 3/8 X 1/2 ODF S/T 5/8 X 7/8 ODF S/T 5/8 X 7/8 ODF S/T 1/2 X 5/8 ODF ANG 5/8 X 7/8 ODF S/T 5/8 X 7/8 ODF S/T 5/8 X 7/8 ODF S/T 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 054366 055092 055491 054370 055992 056022 054967 055996 054969 055497 056024 054968 054983 056029 054979 054981 055496 056225 054980 055657 056031 054988 055991 056032 054990 055498 054989 054768 053270 053070 054992 053271 054844 053071 054783 054143 054142 058907 054785 054784 054145 058875 058608 058305 061196 058607 059291 058808 * For interchangeable refrigerant charges R-134a/R-12, R-404A/R-507/R-502, and R-22/R-407C, the tons of capacity shown in the table are for the first (primary) refrigerant listed. Consult the Nominal Capacity Table for determining the tons of capacity for the secondary refrigerants listed. Example: A 1/4 ton R-12 valve is required. What R-134a ton valve should be selected? Solution: From the Nominal Capacity Table, a 1/2 ton R-134a valve is equivalent to a 1/4 ton R-12 valve. K-93 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 24 PCN 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 057397 057398 057399 057572 058069 057570 057568 058421 057409 057428 057291 057429 057410 057430 057292 057321 057433 057294 057411 057434 057412 057748 057781 058609 057436 057454 057437 057455 057438 057446 057456 057439 057448 057322 057440 057457 057441 057458 058595 059654 065458 064219 Motors Cap Tube 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 5/8 X 7/8 ODF ANG 5/8 X 7/8 ODF ANG Electrical Connections FC FC FC MC MC MC MC MC HC HZ HC HZ HC HZ HC HZ HZ HC HC HZ HC HZ HC HC RC RZ RC RZ RC RW 45 RZ RC RW 45 RZ RC RZ RC RZ RC RZ SC SC Heating Components Charge 1/2 1 1-1/2 1/4 1/2 1 1-1/2 2-1/2 1/4 1/4 1/2 1/2 1 1 1-1/2 1-1/2 2 2 2-1/2 2-1/2 3 3 5-1/2 8 1/4 1/4 1/2 1/2 1 1 1 1-1/2 1-1/2 1-1/2 2 2 2-1/2 2-1/2 5 5 7 10 Indoor Air Quality Tons* HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC HFESC Thermostats Series R-12 R-12 R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-134a R-12 R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 K-94 Refrigeration Tools & Instruments Refrigerant Oils & Chemicals HFESC Series – Externally Equalized (continued) Ordering Information (continued) Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Accessories, Supplies & Commodities EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE HF/HFK SERIES Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 25 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE HF/HFK SERIES HFSC Series – Internally Equalized Ordering Information (continued) Refrigerant Series Tons* Charge Connections Cap Tube PCN R-134a R-12 R-134a R-12 R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-404A R-507 R-502 R-502 R-502 R-502 R-502 R-502 R-502 HFSC HFSC HFSC HFSC HFSC HFSC HFSC HFSC HFSC HFSC HFSC HFSC HFSC HFSC HFSC HFSC HFSC 1/4 1/2 1/4 1/2 1/2 1 2 1/8 1/4 1/2 1-1/4 1/4 1/4 1/2 1/2 1 1 MC MC HC HC HZ HC HC SC SC SC SC RC RZ RC RZ RC RZ 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 3/8 X 1/2 ODF ANG 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 057573 058067 057467 057293 057482 057468 057470 058248 058249 058250 058252 057487 057484 057488 057485 057489 057486 * For interchangeable refrigerant charges R-134a/R-12, R-404A/R-507/R-502, and R-22/R-407C, the tons of capacity shown in the table are for the first (primary) refrigerant listed. Consult the Nominal Capacity Table for determining the tons of capacity for the secondary refrigerants listed. Example: A 1/4 ton R-12 valve is required. What R-134a ton valve should be selected? Solution: From the Nominal Capacity Table, a 1/2 ton R-134a valve is equivalent to a 1/4 ton R-12 valve. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-95 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 26 Refrigeration Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE TRAE Plus Options • Cages (For available cage kits, see page 26.) Electrical Specifications • Maximum working pressure: 450 psig • Torque Power Assembly: 375 - 425 in. lb. Nomenclature example: TRAE+ 30 HC 10 FT 7/8 x 1 1/8 ODF S/T Double Balanced Port Design E + Equalizer Replaceable Components E=External 1/4”SAE 30 Capacity Nominal Rating in Tons Cage and Power Assembly (See nominal capacity table below) H C 10 FT Refrigerant Code +F = R-12 • H = R-22 +M = R-134a • N = R-407C *P = R-507 *R = R-502 *S = R-404A Charge Code Capillary Tube Length C = medium temp CA = heat pump W(MOP) = press. limiting Z = low temp 10 FT (std) 7/8 x 1 1/8 ODF S/T Inlet x Outlet Connection Configuration Connection Type Sizes 5/8 x 7/8 7/8 x 1 1/8 1 1/8 x 1 3/8 ODF = solder (Only) S/T = straightthru (Only) Indoor Air Quality TRA Valve Series Heating Components Features • Stainless steel power element eliminates corrosion and prevents valve failure • Suitable for Bi-Flow applications • Replaceable power element and cage assembly for full serviceability • Double balanced port design improves operation and stability over wide loads and evaporator temperature ranges • Square body with straight-thru connections • Solid copper connections • External superheat adjustment • Large diaphragm provides superior stability • Permanent inlet strainer Motors The TRAE Plus series is a large capacity valve designed for refrigeration, air conditioning, heat pump, and chille applications. + = R-12 and R-134a are interchangeable refrigerant charges * = R-507, R-502 and R-404A are interchangeable refrigerant charges • = R-22 and R-407C are interchangeable refrigerant charges R-507/R-404A/R-502 8 (28) 12 (42) 14 (50) 20 (71) 30 (106) All capacities shown are at 100°F condensing, 40°F evaporator temperature. *See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750. TRAE+ Dimensional Data (in) TRAE+ 10-40 Tons Nominal Inlet (B) 5/8 5/8 7/8 7/8 7/8 1-1/8 1-1/8 5/8 Sizes (ODF) Outlet (E) 7/8 1-1/8 7/8 1-3/8 1-3/8 1-1/8 1-3/8 7/8 A 1.57 1.57 2.09 2.09 2.09 2.21 2.21 1.57 Inlet B C 0.50 2.09 0.50 2.21 0.75 2.09 0.75 2.21 0.75 2.39 0.91 2.21 0.91 2.39 0.50 2.09 D 0.75 0.91 0.75 0.91 0.97 0.97 0.97 0.75 Tools & Instruments TRAE Valve Type Oils & Chemicals R-22/R-407C 10 (35) 15 (53) 20 (71) 30 (106) 40 (142) Accessories, Supplies & Commodities R-134a 9 (32) 13 (46) 14 (50) 22 (78) 30 (106) K-96 Refrigeration R-12 7½ (27) 10 (35) 12 (42) 18 (64) 25 (88) Thermostats TRAE+ Series – Nominal* Capacity Table in Tons (kW) Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 27 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE TRAE SERIES The TRAE series is a large capacity valve for chiller, heat pump, refrigeration, and air conditioning applications. Features • Suitable for Bi-Flow applications • External superheat adjustment • Integral body with straight-thru connections • Balanced port design improves valve operation and stability over wide loads and evaporator temperature range • Solid copper connections • Large diaphragm provides superior stability Specifications • Maximum Working Pressure: 450 psig Nomenclature example: TRAE+ 50 HC 10 FT 7/8 x 1 1/8 ODF S/T TRA E 50 H Refrigerant Code +F = R-12 •H = R-22 +M = R-134a •N = R-407C (See *P = R-507 nominal *R = R-502 capacity table below) *S = R-404A Valve Series Equalizer Capacity Hermetic Nominal Balanced Port E=External Rating in Design 1/4”SAE Tons C 10 FT Charge Code Capillary Tube Length C = medium temp 10 FT (std) CA = heat pump W(MOP) = press. limiting Z = low temp Tools & Instruments Refrigeration 7/8 x 1 1/8 Inlet x Outlet Connection Sizes ODF S/T Connection Type Configuration ODF = solder (Only) S/T = straightthru (Only) 1/4 x 3/8 3/8 x 1/2 + = R-12 and R-134a are interchangeable refrigerant charges * = R-507, R-502 and R-404A are interchangeable refrigerant charges • = R-22 and R-407C are interchangeable refrigerant charges TRAE Series – Nominal* Capacity Table in Tons (kW) R-12 30 (106) 35 (124) 40 (142) R-134a 40 (142) 45 (159) 50 (177) R-22/R-407C 50 (177) 60 (212) 70 (248) R-507/R-404A/R-502 35 (124) 40 (142) 50 (177) All capacities shown are at 100°F condensing, 40°F evaporator temperature. *See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750. Dimensional Data (in) Remote Bulb Tubing Length 10’ Standard Connection Size Inlet Outlet 7/8 ODF 7/8 ODF 7/8 ODF 1-1/8 ODF 7/8 ODF 1-3/8 ODF 1-1/8 ODF 1-1/8 ODF 1-1/8 ODF 1-3/8 ODF 1-3/8 ODF 1-3/8 ODF A 0.88 0.88 0.88 1.13 1.13 1.38 B 0.88 1.13 1.38 1.13 1.38 1.38 C MIN 0.75 0.75 0.75 0.91 0.91 0.91 D MIN 0.75 0.91 0.97 0.91 0.97 0.97 E 2.09 2.90 2.90 2.21 2.21 2.39 F 2.09 2.21 2.39 2.21 2.39 2.39 Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Remote Bulb Table Remote Bulb Tubing Length 5, 10, 15 ft. 20, 30 ft. 40, 50 ft. Bulb Length 4-7/8 6-3/16 K-97 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 28 Cap Tube PCN 5/8 X 7/8 ODF S/T 5/8 X 7/8 ODF S/T 7/8 X 1-1/8 ODF S/T 7/8 X 1-1/8 ODF S/T 7/8 X 1-1/8 ODF S/T 5/8 X 7/8 ODF S/T 7/8 X 1-1/8 ODF S/T 7/8 X 1-3/8 ODF S/T 5/8 X 7/8 ODF S/T 7/8 X 1-3/8 ODF S/T 7/8 X 1-1/8 ODF S/T 1/8 X 1-1/8 ODF S/T 7/8 X 1-1/8 ODF S/T 7/8 X 1-1/8 ODF S/T 7/8 X 1-1/8 ODF S/T 1-1/8 X 1-3/8 ODF S/T 1-1/8 X 1-3/8 ODF S/T 7/8 X 1-3/8 ODF S/T 1-1/8 X 1-3/8 ODF S/T 1-1/8 X 1-3/8 ODF S/T 1-1/8 X 1-3/8 ODF S/T 1-1/8 X 1-3/8 ODF S/T 1-1/8 X 1-3/8 ODF S/T 1-1/8 X 1-3/8 ODF S/T 5 FT 10 FT 10 FT 15 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 15 FT 10 FT 10 FT 10 FT 10 FT 5 FT 10 FT 15 FT 10 FT 10 FT 10 FT 10 FT 062718 063138 063554 063100 062721 063510 062722 063141 063103 063650 062725 064581 064018 062724 062727 062728 062730 063425 062733 063153 062734 061700 061865 061866 (+) Replaceable Power Assembly Cage Replacement Kits for TRAE+ Series Valves Cage kits are cross referenced by capacity and tonnage in the table below. Each cage kit consists of a replacement cage and cage removal wrench. In addition, the cage removal wrench (KT-20294) can be ordered as a separate item. PCN TRAE+ KIT R-22 063387 063388 063389 063390 063391 063392 KT-20289 CAGE KIT KT-20290 CAGE KIT KT-20291 CAGE KIT KT-20292 CAGE KIT KT-20293 CAGE KIT KT-20294 CAGE WRENCH KIT 10 15 20 30 40 All tonnages Nominal Capacity - Tons R-12/R-134a 9 13 14 22 30 All tonnages Replacement Parts Part Number Description X-28458 HCA-2 X-28458 HW100-2 X-28458 SW45-2 27676-1 Power Assembly Power Assembly Power Assembly Seal Nut 8 12 14 20 30 All tonnages K-98 Refrigeration Tools & Instruments PCN 063414 063416 065298 058707 R-507/R-404A/ R-502 Motors Connections HC HCA HCA HC HC HCA HCA HCA HW100 HC HCA HCA HW90 HC HC HC HCA HW100 HC HC HCA HC HC HC Electrical Charge 10 10 10 10 15 15 15 15 15 20 20 20 20 20 30 30 30 30 40 40 40 50 60 70 Heating Components Tons* Indoor Air Quality Series TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE+ TRAE TRAE TRAE Thermostats Refrigerant R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C R-22 R-407C Oils & Chemicals Ordering Information Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Accessories, Supplies & Commodities EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE TRAE / TRAE+ SERIES Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 29 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE T SERIES TAKE-Apart The T-series Take-Apart valves, with adjustable superheat and replaceable, interchangeable components are ideal for original equipment and field replacements in air conditioning, heat pump, and refrigeration applications. Features • Take-Apart construction for easy field service • External superheat adjustment • Bi-Flow capability • Stainless steel power assembly up to 18 tons Specifications • Maximum working pressure: 450 psig Options • Torque Bolts: 300 in. lb. • Interchangeable, replaceable cages • Interchangeable body flanges • Interchangeable power assemblies • 1/4 to 100 tons capacity Nomenclature example: TCLEB 5 HC 5 FT 3/8 X 1/2 SAE ANG TCL E B 5 H C 5 FT Valve Series Equalizer Bleed Hole Capacity Refrigerant Code Charge Code Capillary +F = R-12 Tube Take-Apart E=External (optional) Nominal • H = R-22 C = medium Length Adjustable (Omit for B=Bleed Rating in Tons +M = R-134a temp Internal) Hole (See Cage • N = R-407C CA = heat (Omit for no Assembly pump *P = R-507 bleed hole) Interchange*R = R-502 W(MOP) = ability Tables) *S = R404A press. limiting Z = low temp Various sizes are available (valve is also available less flange) 1 Bleed Hole Diameter for % Capacity Bypass Valve Type 10% Oils & Chemicals Accessories, Supplies & Commodities SAE ANG Connection Configuration Type ANG = 90° SAE=flare angle ODF=solder S/T=straightthru Single Outlet “T” Series Body Flanges with Bleed Hole for Use with PSC Compressors R-12/R-134a R-22/R-407C R-507/R502/R-404A TCL1/4F TCL1/2H TCL1/2R – TCL1/2F TCL1H TCL1/2R 0.02 Dia. (In) 15% Drill Size 20% 25% 30% 40% Dia. (In) Drill Size Dia. (In) Drill Size Dia. (In) Drill Size Dia. (In) Drill Size Dia. (In) Drill Size – 0.02 1/64 0.02 77 0.02 76 0.02 74 0.03 72 77 0.02 75 0.02 73 0.03 71 0.03 69 0.04 65 TCL1F TCL2H TCL1R 0.03 71 0.03 1/32 0.04 64 0.04 60 0.05 56 0.05 55 TCL2F TCL3H TCL2R 0.03 70 0.04 65 0.04 60 0.04 57 0.05 3/4 0.06 54 TCL3F TCL5H TCL3R 0.04 65 0.04 57 0.05 55 0.06 54 0.06 1/16 0.07 50 TCL4F TCL7-1/2H TCL4-1/2R 0.04 57 0.05 55 0.06 53 0.07 51 0.08 48 0.09 44 TCL6-1/2F TCL10H TCL7R 0.05 55 0.06 53 0.07 50 0.08 47 0.09 44 0.10 39 TCL7-1/2F TCL12H TCL8R 0.05 55 0.06 53 0.07 50 0.08 47 0.09 44 0.10 39 1 Bleed hole sizes shown above are based on a percent of full effective port area of the valve. This does not necessarily indicate the percent of valve capacity that will be bypassed. The hole sizes shown above should be used for reference only. Normal industry practice is to equalize systems 3 to 5 minutes. Tools & Instruments Refrigeration 3/8 x 1/2 Inlet x Outlet Connection Sizes + = R-12 and R-134a are interchangeable refrigerant charges * = R-507, R-502 and R-404A are interchangeable refrigerant charges • = R-22 and R-407C are interchangeable refrigerant charges Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-99 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 30 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE T SERIES Take A-Part Small Capacity ½ to 18 tons (R-22 Nominal – Bi Flow) 1/4 1/4 1/2 1/2 1 1 2 2 3 4 6-1/2 7-1/2 7 8 8 11 1/4 1/4 3/4 3/4 1-1/2 1-1/2 2-1/2 2-1/2 3-1/2 5-1/2 7-1/2 9 9 11 11 13 R-502 R-407C PCN Description 1/4 1/4 1/2 1/2 1 1 2 2 3 4-1/2 7 8 7 9 9 12 1/2 1/2 1 1 2 2 3 3 5 7-1/2 10 12 11 14 14 18 037034 037035 037036 037037 037038 037039 037040 037041 037043 037045 037047 037049 093343 038699 088837 089058 X22440B1A X22440B1B X22440B2A X22440B2B X22440B3A X22440B3B X22440B4A X22440B4B X22440B5B X22440B6B X22440B7B X22440B8B XC724B4B XC724B5B X11873B4B X11873B5B 1 Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Gaskets included on cage. Gasket strip X13455-1 (PCN: 027579) replaces all older T-Series Gasket kits. Electrical TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TJLE TJLE TJR TJR Nominal Capacity - Tons R-22 R-404A R-507 1/2 1/4 1/2 1/4 1 1/2 1 1/2 2 1 2 1 3 2 3 2 5 3 7-1/2 4-1/2 10 7 12 8 11 7 14 9 14 9 18 12 Heating Components R-134a Indoor Air Quality R-12 K-100 Refrigeration Valve Type Motors Step 1: Select Cage from Capacity Table Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 31 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE T SERIES Take A-Part Small Capacity ½ to 18 tons (R-22 Nominal – Bi Flow) Step 2: Select Flange Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Valve Type Flow TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TCL TCLE TJLE TJLE TJLE TJLE Angle Angle Angle Angle Angle Angle Angle Straight-Thru Straight-Thru Straight-Thru Straight-Thru Straight-Thru Straight-Thru Straight-Thru Straight-Thru Straight-Thru Straight-Thru Straight-Thru Straight-Thru Straight-Thru Angle Straight-Thru Straight-Thru Straight-Thru Angle Straight-Thru Size & Style Connections Inlet Outlet 3/8 SAE 3/8 SAE 1/2 SAE 3/8 ODF 3/8 OFD 1/2 ODF 5/8 ODF or 7/8 ODM 3/8 SAE 3/8 SAE 1/2 SAE 1/2 SAE 3/8 ODF 3/8 ODF 1/2 ODF 1/2 ODF 1/2 ODF 5/8 ODF 5/8 ODF 5/8 ODF 7/8 ODF 5/8 ODF or 7/8 ODM 5/8 ODF 7/8 ODF 7/8 ODF 5/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 1/2 SAE 5/8 SAE 4/8 SAE 1/2 ODF 5/8 ODF 5/8 ODF 7/8 ODF or 1-1/8 ODM 1/2 SAE 5/8 SAE 1/2 SAE 5/8 SAE 1/2 ODF 5/8 ODF 1/2 ODF 5/8 ODF 7/8 ODF 5/8 ODF 7/8 ODF 1-1/8 ODF 1-1/8 ODF 7/8 ODF or 1-1/8 ODM 1-1/8 ODF 1-1/8 ODF 1-3/8 ODF 7/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM Tools & Instruments Refrigeration PCN C500-4 C500-5 C500-6 C501-4 C501-5 C501-7 A576 X6669-4 X6669-1 X6669-5 X6669-2 9761-5 9761-3 9761-6 9761-4 9761-2 X6346-16 X6346-17 X6346-18 X6346-34 B504 X6347-2 X6347-6 X6347-7 10331 10332 056932 057153 056294 065527 065748 065861 027764 051176 050563 083378 050842 027769 027771 027766 027268 027770 044733 044846 094038 071757 044984 094289 057210 057323 029411 032988 TJR is balanced ported. TJR flange includes extended length cap screws. NOTE: Nominal capacities shown here are based on 40°F evaporator temperature and 100°F vapor-free liquid refrigerant entering the valve. R-12 and R-134a rated at 60 PSID. All other refrigerants rated at 100 PSID. Accessories, Supplies & Commodities Oils & Chemicals 2 Body Flange Part Number K-101 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 32 3 4 5 Internal 1/4 SAE Internal 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE Internal 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE Internal 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 5 FT 5 FT 10 FT 10 FT 15 FT 5 FT 5 FT 10 FT 5 FT 5 FT 5 FT 10 FT 5 FT 5 FT 5 FT 5 FT 5 FT 20 FT 10 FT 5 FT 10 FT 5 FT 5 FT 5 FT 5 FT 5 FT 5 FT 10 FT 5 FT 5 FT 5 FT 10 FT 5 FT 5 FT 5 FT 10 FT 5 FT 5 FT 10 FT 5 FT 5 FT 5 FT 10 FT 5 FT 5 FT 5 FT 5 FT 5 FT -20 to +50 -20 to +50 -20 to +50 -20 to +50 -20 to +50 -50 to +50 -50 to +50 -50 to +50 -50 to 0 -20 to +50 -20 to +50 -20 to +50 -20 to +50 -50 to +5 -50 to +20 -50 to +30 -50 to +50 -10 to +50 -50 to +50 -50 to +10 -50 to +10 -20 to +50 -20 to +50 -20 to +50 -50 to 0 -50 to +10 -20 to +50 -20 to +50 -50 to +50 -50 to +10 -20 to +50 -20 to +50 -50 to +20 -50 to +5 -50 to +5 -50 to +5 -50 to +25 -50 to +10 -50 to +10 -20 to +50 -50 to 0 -50 to +25 -50 to +10 Liquid Injection Liquid Injection Liquid Injection Liquid Injection Liquid Injection Capscrews included with Power Assembly Maximum Operating Pressure Limit to prevent motor overload Power Assembly final character: A=Internally Equalized, B=Externally Equalized PCN NONE NONE NONE NONE NONE 35 55 55 15 NONE NONE NONE NONE 35 55 65 100 NONE 100 NONE NONE NONE 100 NONE 40 NONE NONE NONE 55 NONE NONE NONE 15 35 45 45 65 NONE NONE NONE 40 65 NONE NONE NONE NONE NONE NONE XB-1019FC1A XB-1019FC1B XB-1019FC2A XB-1019FC2B XB-1019FC3B XB-1019FW351B XB-1019FW551B XB-1019FW552B XB-1019FW151B XB-1019HC1A XB-1019HC1B XB-1019HC2B XB-1019HCA1B XB-1019HW351B XB-1019HW551B XB-1019HW651B XB-1019HW1001B XB-1019HW4B XB-1019HW1002B XB-1019HZ1B XB-1019HZ2B XB-1019NC1B XB-1019NW1001B XB-1019PC1B XB-1019PW401B XB-1019PZ1B XB-1019MC1B XB-1019MC2B XB-1019MW551B XB-1019MZ1B XB-1019RC1B XB-1019RC2B XB-1019RW151B XB-1019RW351B XB-1019RW451B XB-1910RW452B XB-1019RW651B XB-1019RZ1B XB-1019RZ2B XB-1019SC-1B XB-1019SW401B XB-1019SW651B XB-1019SZ2B XB-1019A-1A XB-1019A-1B XB-1019B-1B XB-1019C-1B XB-1019CW-1B 052951 049881 032374 052954 058569 079346 057432 050981 077063 062078 053416 054390 056039 089975 039152 089445 062437 055703 062658 040568 054105 064837 063069 061949 064200 061951 057878 059548 057370 061946 052955 054415 070346 063644 055881 055704 063114 046474 047358 059189 059130 063541 061948 037389 034803 032207 035162 084768 NOTE: Nominal capacities shown here are based on 40°F evaporator temperature and 100°F vapor-free liquid refrigerant entering the valve. R-12 and R-134a rated at 60 PSID. All other refrigerants rated at 100 PSID. K-102 Motors R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-12 R-22 R-22 R-22 R-22 R-22 R-22 R-22 R-22 R-22 R-22 R-22 R-22 R-407C R-407C R-507 R-507 R-507 R-134a R-134a R-134a R-134a R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-502 R-404A R-404A R-404A R-404A Misc. Misc. Misc. Misc. Misc. Electrical Temp. Range Heating Components Cap Tube Length Indoor Air Quality Equalizer Type Thermostats Application Refrigerant Oils & Chemicals TCL-TCLE-TJLE-TJR Power Assemblies3 Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Accessories, Supplies & Commodities Step 3: Select Power Assembly Tools & Instruments Small Capacity ½ to 18 tons (R-22 Nominal – Bi Flow) Refrigeration EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE T SERIES Take A-Part Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 33 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE T SERIES Take-Apart Large Capacity 22 to 100 tons (R22 Nominal – Balanced Ported and Bi Flow) Step 1: Select Cage from Capacity Table Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Motors Compressors, Chillers, Condensers Refrigeration R-12 R-134a TER TER TER TER TIR THR THR THR TMR 13 15 20 25 35 35 45 55 55 16 19 25 31 45 45 55 68 68 1 Nominal Capacity - Tons R-22 R-404A R-507 22 14 26 16 35 21 45 27 55 37 55 37 70 48 85 60 100 60 R-502 R-407C PCN Description 14 16 21 27 37 37 48 60 -- 22 26 35 45 55 55 70 85 100 077896 078117 071155 029429 070738 071238 020846 021067 065123 X9117B6B X9117B7B X9117B8B X9117B9B X9166B10B X9144B10B X9144B11B X9144B13B X9144B14B Gaskets included on cage. Gasket strip X13455-1 (PCN: 027579) replaces all older T-Series Gasket kits. Step 2: Select Flange Valve Type Style TIR TIR THR THR TMR2 TMR2 ANGLE STRAIGHT-THRU ANGLE STRAIGHT-THRU ANGLE STRAIGHT-THRU ANGLE STRAIGHT-THRU Size & Style Connections Inlet Outlet 7/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 1-1/8 ODM 1-1/8 ODM 1-1/8 ODM 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 7/8 ODF or 1-1/8 ODM 1-1/8 ODM 1-1/8 ODM 1-1/8 ODM 1-1/8 ODM 2 Refrigeration Body Flange Part Number PCN 9153 9152 9151 9150 9149 9148 9149-1 9148-1 027919 027918 027926 028849 028030 028032 065124 065125 TER-TMR Flange includes extended length cap screws. NOTE: Nominal capacities shown here are based on 40°F evaporator temperature and 100°F vapor-free liquid refrigerant entering the valve. R-12 and R-134a rated at 60 PSID. All other refrigerants rated at 100 PSID. Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Valve Type K-103 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 34 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE T SERIES Take-Apart Large Capacity 22 to 100 tons (R22 Nominal – Balanced Ported and Bi Flow) Step 3: Select Power Assembly Motors TER-TIR-THR-TMR Power Assemblies3 Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Compressors, Chillers, Condensers Refrigeration 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT 10 FT -20 to +40 -50 to +50 -20 to +50 -50 to +50 -50 to +30 -20 to +50 -50 to +50 -50 to +10 -20 to +50 -50 to +50 -50 to +10 -20 to +50 -50 to +20 -50 to +50 -50 to +25 -50 to +10 -20 to +50 -50 to +10 -50 to +25 -50 to +10 NONE 55 NONE 35 65 NONE 100 NONE NONE 55 NONE NONE 15 35 65 NONE NONE 40 65 NONE Power Assembly PCN XC-726FC2B XC-726FW552B XC-726HC2B XC-726HW352B XC-726HW652B XC-726HCA2B XC-726HW1002B XC-726HZ2B XC-726MC2B XC-726MW552B XC-726MZ2B XC-726RC2B XC-726RW152B XC-726RW352B XC-726RW652B XC-726RZ2B XC-726SC2B XC-726SW402B XC-726SW652B XC-726SZ2B 052957 035000 056421 024511 025011 059333 036750 040569 057235 057372 063075 052958 023351 070866 071421 046692 062303 063127 061692 063974 Capscrews included with Power Assembly Maximum Operating Pressure Limit to prevent motor overload Additional Parts PCN Description 039862 027579 058336 Packing Nut Wrench Gasket Strip Superheat Adjustment Plug Tools & Instruments Accessories, Supplies & Commodities NOTE: Nominal capacities shown here are based on 40°F evaporator temperature and 100°F vapor-free liquid refrigerant entering the valve. R-12 and R-134a rated at 60 PSID. All other refrigerants rated at 100 PSID. Heating Components 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE 1/4 SAE Indoor Air Quality R-12 R-12 R-22 R-22 R-22 R-22 R-22 R-22 R-134A R-134A R-134A R-502 R-502 R-502 R-502 R-502 R-404A R-404A R-404A R-404A Thermostats Temp. Range Oils & Chemicals 4 Cap Tube Length K-104 Refrigeration 3 Equalizer Type Electrical Application Refrigerant Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 35 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE T SERIES Take-Apart Ordering Information Valves less flange – (VLF) TCLE, TJLE & TJRE SAE External 5 FT. Cap Tube Length Replacement Cap Screw Kits PCN 054569 054570 054571 054572 054573 054574 Refrigeration Contains Pcs. Per Screw # Pkg. PS-286-5 10 PS-168-5 10 PS-259 10 PS-370 10 PS-514-5 10 PS-517-5 10 Description KT-30021 KT-30022 KT-30023 KT-30024 KT-30025 KT-30026 Valve Description Note: When Ordering Apply ALC –As Prefix to PCN Number. TCLE/TJLE/TJRE Rapid Response Power Assemblies Example ALC -054366 PCN PCN R-12 054413 052940 052941 052942 052943 052944 052945 055104 055105 062884 061724 054395 054399 054401 054079 054404 059076 060854 060855 060856 060857 060858 061215 055501 063501 TCLE 1/2 FC TCLE 1 FC TCLE 2 FC TCLE 3 FC TCLE 4 FC TCLE 6-1/2 FC TCLE 7-1/2 FC TJLE 8 FC TJRE 11 FC R-22 R-502 TCLE 1 HC TCLE 2 HC TCLE 3 HC TCLE 5 HC TCLE 7-1/2 HC TCLE 7-1/2 HW100 TCLE 10 HC TCLE 10 HW100 TCLE 12 HC TJLE 11 HC TJLE 14 HC TJRE 14 HC TJRE 18 HC PCN Description 035083 093565 036616 X-7726 FWS 2B X-7726 HWS 2B X-7726 RWS 2B TER, TIR & THR 10 FT. Cap Tube Length Valve Description PCN R-12 TER 20 FC TER 25 FC R-22 Old TJLE800 TJLE1100 TJLE1400 TJLE1800 TJLE900 TJLE1200 TER/TIR/THR Rapid Response Power Assemblies TCLE 2 RC TCLE 3 RC TCLE 8 RC 055109 055111 061673 058582 061674 061675 058038 061676 061677 064961 062036 052912 060788 Description 031654 X-8019 FWS 1B 055652 X-8019 HWS 1B 055873 X-8019 HWS 2B 032131 X-8019 RWS 1A 042426 X-8019 RWS 2B Nomenclature Cross-Reference Refrigerant New TJLE7 R-12 TJLE8 TJLE11 R-22 TJLE14 TJLE7 R-502 TJLE9 R-502 TER 22 HC TER 22 HW100 TER 26 HC TER 35 HC TER 35 HW100 TER 45 HC TIR 55 HC THR 75 HC THR 100 HC THR 100 HW100 TER 14 RC Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-105 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 36 Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE TLE SERIES ¼” SAE Standard ¼” ODF Available B Bleed Hole (optional) B=Bleed Hole (Omit for no bleed hole) 5 Capacity Nominal Rating in Tons (See Cage Capacity Table) H Refrigerant Code +F = R-12 •H = R-22 +M = R-134a •N = R-407C *P = R-507 *R = R-502 *S = R-404A C Charge Code C = medium temp CA = heat pump W(MOP) = press. limiting Z = low temp 5 FT Capillary Tube Length 5 FT (std) 3/8 x 1/2 Inlet x Outlet Connection Sizes Various sizes are available (valve is available also less flange) ODF S/T Connection Configuration Type ANG = 90° angle SAE=flare S/T = straightODF=solder thru (Omit for Internal) Indoor Air Quality + = R-12 and R-134a are interchangeable refrigerant charges * = R-507, R-502 and R-404A are interchangeable refrigerant charges • = R-22 and R-407C are interchangeable refrigerant charges Electrical E Equalizer E=External Heating Components TL Valve Series* TakeApart Motors The TLE series is designed for air conditioning, heat pumps, transportation and commercial refrigeration. Take-Apart construction improves serviceability with replaceable/interchangeable parts. TLE valves do not have an external superheat adjustment. Features • Stainless steel power element eliminates corrosion and prevents valve failure • Non-adjustable superheat to maintain factory setting • Bi-Flow capability for heat pump applications (external equalizer required) • Take-Apart construction for easy field service Specifications Options • Interchangeable capacity cages, • Maximum working pressure: 450 psig • Capscrew Torque: 300 in. lbs. power assemblies and flanges Nomenclature example: TLEB 5 HCA 5 FT 3/8 x 1/2 ODF S/T Dimensional Data (in) A B 0.63 0.88 C MIN D MIN 0.81 1.00 TLE Straight Thru Connection Size Inlet Outlet 5/8 ODF 1-1/8 ODF 7/8 ODF 1-1/8 ODF 7/8 ODF 1-3/8 ODF A B C MIN D MIN E F 0.63 0.88 0.88 1.13 1.13 1.38 0.53 0.75 0.75 0.91 0.91 0.97 1.63 1.94 1.94 2.50 2.50 2.69 K-106 Refrigeration Tools & Instruments Allow 2-1/8” above valve for removal of power assembly. Accessories, Supplies & Commodities Oils & Chemicals Connection Size Inlet Outlet ODF:ODM ODF:ODM 5/8:7/8 7/8:1-1/8 Thermostats TLE Angle Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 37 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE TLE SERIES Valve Less Flange (VLF) Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 TLE 1/2 HW TLE 1 HW TLE 2 HW TLE 3 HW TLE 5 HW TLE 7-1/2 HW TLE 10 HW TLE 12 HW Motors Compressors, Chillers, Condensers Refrigeration 1 PCN Equalizer Type Refrigerant ---041734 054793 054794 055125 054795 1/4 SAE External 1/4 SAE External 1/4 SAE External 1/4 SAE External 1/4 SAE External 1/4 SAE External 1/4 SAE External 1/4 SAE External R-22 R-22 R-22 R-22 R-22 R-22 R-22 R-22 Also available with “HCA” charge for heat pump and air conditioning applications. Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Cage Capacities in Tons PCN R-12 R-134A 041556 041560 041562 041566 1 2 3 6-1/2 1-1/2 2-1/2 3-1/2 7-1/2 R-22/R-407C R-404/R-507/R-502 2 3 5 10 Description 1 2 3 7 X-22517 B3B X-22517 B4A X-22517 B5B X-22517 B7B Flanges PCN Connections Description 027770 027771 027268 027769 027766 027764 056932 057153 056294 065527 065748 065861 044733 044846 094038 071757 050563 050842 051176 083378 1/2 X 7/8 ODF S/T 3/8 X 5/8 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 5/8 X 7/8 ODF ANG 3/8 X 1/2 SAE ANG 3/8 X 5/8 SAE ANG 1/2 X 5/8 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 5/8 ODF ANG 1/2 X 5/8 ODF ANG 5/8 X 5/8 ODF S/T 5/8 X 7/8 ODF S/T 5/8 X 1-1/8 ODF S/T 7/8 X 1-1/8 ODF S/T 3/8 X 5/8 SAE S/T 1/2 X 5/8 SAE S/T 3/8 X 1/2 SAE S/T 1/2 X 1/2 SAE S/T 9761-2 9761-3 9761-4 9761-5 9761-6 A-576 C-500-4 C-500-5 C-500-6 C-501-4 C-504-5 C-504-7 X-6346-16 X-6346-17 X-6346-18 X-6346-34 X-6669-1 X-6669-2 X-6669-4 X-6669-5 Replacement Power Assemblies Refrigeration Tools & Instruments Accessories, Supplies & Commodities PCN 083765 061760 077201 089748 095534 095813 Power Assembly Nomenclature Description XB-1033 XXX-YZ xxx = charge code y = cap tube length code z = internal (A) or external (B) equalizer Description XB1033 FW25-1B XB1033 HW-1B XB1033 HW-15A XB1033 HW-75B XB1033 HW100-15B XB1033 HW100-1B K-107 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 38 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE TFE R-22 SERIES *See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750 Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Nomenclature example: TFES 10 HCA 5/8 x 7/8 ODF S/T ¼” ODF S = solder (Only) (See nominal capacity table below) H Refrigerant Code CA Charge Code •H = R-22 M = R-134a •N = R-407C *P = R-507 *R = R-502 *S = R-404A C = medium temp CA = heat pump 5/8 x 7/8 Inlet x Outlet Connection Sizes ODF Connection Type S/T Configuration ODF=solder S/T = Straight-thru Indoor Air Quality E=External 10 Capacity Nominal Rating in Tons (See ordering information table below) * = R-507, R-502 and R-404A are interchangeable refrigerant charges, • = R-22 and R-407C are interchangeable refrigerant charges Ordering Information Valve Series Capacity Tons* (R-22 Nominal) 8 TFES 10 12 20 Connections 1/2 X 5/8 ODF S/T 6A 5/8 X 5/8 ODF S/T 6A 5/8 X 7/8 ODF S/T 6A ODF EE 5/8 X 7/8 ODF S/T 6A SAE EE 1/2 X 7/8 ODF S/T 6A 5/8 X 7/8 ODF S/T 6A 5/8 X 7/8 ODF S/T 6A ODF EE 5/8 X 7/8 ODF S/T 6A SAE EE 5/8 X 7/8 ODF S/T 6A 5/8 X 7/8 ODF S/T 12A 5/8 X 7/8 ODF S/T 6A PCN HCA Charge (R-22 Heat Pump) 061710 061611 061608 062370 062124 062347 061610 062371 061609 062460 064493 Inlet/Outlet Fittings Dimensional Data (in) Connections Inlet Outlet 3/8 ODF 1/4 ODF 1/2 ODF 5/8 ODF 3/8 ODF 1/2 ODF 3/8 ODF 5/8 ODF 7/8 ODF 1/2 ODF 1/2 ODF 5/8 ODF 7/8 ODF 5/8 ODF 5/8 ODF 7/8 ODF 1-1/8 ODF 7/8 ODF 7/8 ODF 1-1/8 ODF Inlet A 0.25 0.25 0.25 0.38 0.38 0.38 0.38 0.50 0.50 0.50 0.63 0.63 0.63 0.88 0.88 Outlet B 0.38 0.50 0.63 0.38 0.50 0.63 0.88 0.50 0.63 0.88 0.63 0.88 1.13 0.88 1.13 C MIN 0.31 0.37 0.37 0.37 0.50 0.50 0.50 0.76 0.76 K-108 Equalizer D MIN 0.31 0.37 0.50 0.31 0.37 0.50 0.76 0.37 0.50 0.76 0.50 0.76 0.91 0.76 0.91 1/4 ODF SAE 1.70 1.65 Thermostats S Connection Type Oils & Chemicals E Equalizer Accessories, Supplies & Commodities TF Valve Series Balanced Port, Replaceable Power Assembly Heating Components Electrical R-502 , R-404a/R-507 5 7 9 14 Tools & Instruments R-22/R-407C 8 10 12 20 Refrigeration R-134a 6 8 10 15 Motors The TFE R-22 series is designed for large tonnage heat pump, air conditioning, and commercial refrigeration applications. Features • Stainless steel power element eliminates corrosion and prevents valve failure • Replaceable power element • External superheat adjustment • ODF connections • Balanced port construction compensates for changes in operating pressures due to varying ambients, or widely varying evaporator loads • Bi-Flow capability for heat pump applications • External equalizer Specifications • Maximum working pressure: 450 psig TFE Nominal* Capacity Table in Tons Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 39 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE TFE R-22 SERIES Dimensional Data (in) Electrical Motors Compressors, Chillers, Condensers Refrigeration Remote Bulb C,A,Z CA, AA Tubing Length (Ft) 2, 2-1/2, 5 10 15, 20, 30 40, 50 2-1/2, 5, 10 F 3.06 3.56 4.81 6.19 2.31 Power Assembly Power Assembly Power Assembly Seal Nut 0.63 0.76 PCN Description 063414 063416 065298 058707 X-28458 HCA-2 X-28458 HW100-2 X-28458 SW45-2 27676-1 Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments Refrigeration G Replacement Parts Thermostats Indoor Air Quality Heating Components Charge K-109 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 40 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE TFE R-410A SERIES AA Charge Code Z = R-410A AA = wide range Electrical 5/8 x 7/8 ODF Connection Inlet x Outlet Type Connection Sizes (See ordering information table ODF=solder below) S/T Configuration S/T = Straightthru Ordering Information Refrigerant Tons Bleed Inlet x Outlet Sensing Bulb Capillary Tube Length PCN R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A R-410A 12 12 12 16 16 16 20 20 20 15% 15% 15% - 5/8 ODF x 7/8 ODF 5/8 ODF x 7/8 ODF 7/8 ODF x 1-1/8 ODF 5/8 ODF x 7/8 ODF 5/8 ODF x 7/8 ODF 7/8 ODF x 1-1/8 ODF 5/8 ODF x 7/8 ODF 5/8 ODF x 7/8 ODF 7/8 ODF x 1-1/8 ODF 5 ft. 5 ft. 10 ft. 5 ft. 5 ft. 10 ft. 5 ft. 5 ft. 10 ft. 066146 066147 066148 066149 066150 066151 066152 066153 066154 Inlet/Outlet Fittings Dimensional Data (in) 1/2 ODF 5/8 ODF 7/8 ODF Outlet 1/2 ODF 5/8 ODF 7/8 ODF 5/8 ODF 7/8 ODF 1-1/8 ODF 7/8 ODF 1-1/8 ODF Inlet A 0.50 0.50 0.50 0.63 0.63 0.63 0.88 0.88 Outlet B MIN 0.37 0.37 0.37 0.50 0.50 0.50 0.76 0.76 C 0.50 0.63 0.88 0.63 0.88 1.13 0.88 1.13 D MIN. 0.37 0.50 0.76 0.50 0.76 0.91 0.76 0.91 Tools & Instruments Connections Inlet Heating Components Z Refrigerant Code Indoor Air Quality 16 Capacity Nominal Rating in Tons Accessories, Supplies & Commodities TF E S Valve Series Equalizer Connection Type Balanced E=External Port, Replaceable S = solder Power ¼” ODF Assembly Thermostats *See Extended Capacity Tables for ratings at a wide range of conditions per ARI standard 750 Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Nomenclature example: TFES 16 ZAA 5/8 x 7/8 ODF S/T Oils & Chemicals Typical System Application 10-13 Tons 14-17 Tons 18-20 Tons K-110 Refrigeration Model TFE 12 TFE 16 TFE 20 Motors The TFE R-410A series is designed for large tonnage heat pump, air conditioning, and commercial refrigeration applications. Features • Stainless steel power element eliminates corrosion and prevents valve failure • Replaceable power element • External superheat adjustment • ODF connections • Balanced port construction compensates for changes in operating pressures due to varying ambient, or widely varying evaporator loads • Bi-Flow capability for heat pump applications • External equalizer • ZAA charge for R-410A systems Specifications • Maximum working pressure: 630 psig TFE Nominal* Capacity Table in Tons Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 41 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE TFE R-410A SERIES Dimensional Data (in) Electrical Motors Compressors, Chillers, Condensers Refrigeration Replacement Parts PCN Description 066155* 058707 R-410A Power Assembly (10 ft.)* Seal Nut Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components *Approved for use only on TFE-Series R-410A valves (with ZAA charge) K-111 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 42 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE TI SERIES w/ Interchangeable Cartridges Electrical W Charge Code W = medium temp W(MOP) = press. limiting Heating Components (Omit for internal) H Refrigerant Code •H = R-22 M = R-134a •N = R-407C *P = R-507 *S = R-404A * = R-507 and R-404a are interchangeable refrigerant charges • = R-22 and R-407C are interchangeable refrigerant charges Interchangeable Cages Cage Size Type PCN R-134a Nominal Capacity (kW) R-22/R-407C R-404A/R-507 00 0 1 2 3 4 5 6 TIO-00X TIO-000 TIO-001 TIO-002 TIO-003 TIO-004 TIO-005 TIO-006 065087 065088 065090 065091 065092 065093 065094 065095 0.03 0.08 1.90 3.10 5.00 8.30 10.10 11.70 0.05 1.30 3.20 5.30 8.50 13.90 16.90 19.50 0.04 1.00 2.30 3.90 6.20 10.10 12.30 14.20 NOTE: Nominal capacities shown on pages at the end of this section are based on European standards of +38°C condensing temperature, +4°C evaporating temperature and 1°K liquid subcooling at the inlet of the expansion valve. This methodology varies from the rest of the capacity tables in this catalog. TI(E) Series – Valve bodies, Flare type Evaporating Temp Range °F PCN Equalizer Type -10 to +40 -10 to +40 -10 to +40 -10 to +40 -10 to +40 -10 to +40 065016 065017 065020 065021 065028 065031 internal external internal external internal external Refrigerant R-134a Valve R-22/R-407C Valve R-404A/R-507 Valve TI-MW TIE-MW TI-HW TIE-HW TI-SW TIE-SW K-112 Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Dimensional Data (in) Indoor Air Quality E=External 4 Orifice Size Valves sold less cage (Select proper cage from inter-changeability table below) Thermostats E Equalizer Refrigeration TI Valve Series Motors The TI series has interchangeable cages capable of changing valve capacity in the field. Features • Stainless steel power element eliminates corrosion and prevents valve failure • Wrench flats on inlet and outlet • Forged brass valve body • Inlet strainer assembly Options Specifications • Interchangeable capacity • Inlet connection size: 3/8” SAE, Outlet 1/2” SAE cages • Maximum working pressure: 450 psig • Maximum bulb temperature: 165°F Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Nomenclature example: TIE4 HW Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 43 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE ZZ SERIES for Ultra Low Temperatures The ZZ series is designed for ultra low temperature applications such as environmental test chambers and other applications where the desired evaporator temperature is below -40°F. Features • Take-Apart construction for easy field service • Improved internal construction extends valve life • External equalizer standard • Exclusive cage bellows eliminates friction at low temperatures • External superheat adjustment Specifications Options • Interchangeable cages, power assemblies, and flanges for Maximum working pressure: 450 psig maximum flexibility Nomenclature example: ZZC 6 B G125 10 FT 3/8 x 5/8 ODF ANG ZZC Valve Series Ultra Low Temperature 6 Capacity (nominal @ -40°F) Tons B Refrigerant Code B = R-13/R-23 H = R-22 R = R-502 G125 Charge Code Z = low temp G(MOP) = press.limiting 10 FT Capillary Tube Length ODF Connection Type SAE = flare ODF=solder 10 FT (std) R-13/R-23 Valve Type ZZC 1BG ZZC 2-1/2BG ZZC 4BG ZZC 6BG ZZC 9BG ZZC 13BG ZZ ER 20BG R-22 Valve Type ZZC 3/4HZ ZZC 1-1/2HZ ZZC 2-1/2HZ ZZC 4HZ ZZC 6HZ ZZC 8HZ -- Standard Connections 3/8 ODF x 5/8 ODF 1/2 ODF x 5/8 ODF 7/8 ODF x 1-1/8 ODM NOTE: Nominal capacities shown here are based upon the following conditions: Refrigerant R-23 R-22 Evaporator Temperature -40°F -40°F Liquid Temperature at Valve Inlet 0°F 20°F Accessories, Supplies & Commodities Tools & Instruments Refrigeration 3/8 x 5/8 Inlet x Outlet Connection Sizes Take-Apart Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-113 Pressure Drop Across Valve 150 psig 150 psig ANG Configuration ANG = 90° angle S/T = straightthru Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 44 PCN Description 021288 020871 096091 096312 096425 096646 045362 033697 030071 025100 025101 025090 089306 X10110-B1B X10110-B2B X10110-B3B X10110-B4B X10110-B5B X10110-B6B X10059-B4B X10059-B5B X10059-B6B X10059-B7B X10059-B8B X10060-B10B X10111-B5B PCN Description XC-726 BG 30-2B 10FT. SAE EE XC-726 BG 125-2B 10 FT. SAE EE XC-726 HW 35-2B 10 FT. SAE EE XC-726 HW 65-2B 10 FT. SAE EE XC-726 HW 85-3B 15 FT. SAE EE XC-726 HW 100-2B 10FT. SAE EE XC-726 HZ-2B 10FT. SAE EE Indoor Air Quality Power Assemblies 094594 039130 024511 025011 023357 036750 040569 Thermostats Replacement Power Assembly consists of: power assembly, and bulb clamps Replacement Gasket Set PCN Description 027579 X-13455-1 9761-2 9761-3 9761-4 9761-5 9761-6 A-576 C-500-4 C-500-5 C-500-6 C-501-4 C-501-5 C-501-7 X-6346-16 X-6346-17 X-6346-18 X-6346-34 X-6669-1 X-6669-2 X-6669-4 X-6669-5 Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Gasket Set includes necessary body flange gasket & seat gasket K-114 Refrigeration Valve ZZC1BG, ZZC3/4RHW, ZZC3/4RW ZZC2-1/2BG, ZZC1-1/2HW, ZZC1-1/2RW ZZC4BG, ZZC2-1/2HW, ZZC2-1/2RW ZZC6BG, ZZC4HW, ZZC3-1/2RW ZZC9BG, ZZC6HW, ZZC5RW ZZC13BG, ZZC8HW, ZZC8RW ZZER6BG, ZZER4HW, ZZC3-1/2RW ZZER9BG, ZZER6HW, ZZER5RW ZZER20BG, ZZER12HW, ZZER11RW ZZER21BG, ZZER13HW, ZZER13RW ZZER29BG, ZZER18HW, ZZER18RW ZZIR48BG, ZZIR30HW, ZZIR29RW ZZJR16BG, ZZJR10HW, ZZJR9RW 1/2 X 7/8 ODF S/T 3/8 X 5/8 ODF S/T 1/2 X 5/8 ODF S/T 3/8 X 1/2 ODF S/T 1/2 X 1/2 ODF S/T 5/8 X 7/8 ODF ANG 3/8 X 1/2 SAE ANG 3/8 X 5/8 SAE ANG 1/2 X 5/8 SAE ANG 3/8 X 1/2 ODF ANG 3/8 X 5/8 ODF ANG 1/2 X 5/8 ODF ANG 5/8 X 5/8 ODF S/T 5/8 X 7/8 ODF S/T 5/8 X 1-1/8 ODF S/T 7/8 X 1-1/8 ODF S/T 3/8 X 5/8 SAE S/T 1/2 X 5/8 SAE S/T 3/8 X 1/2 SAE S/T 1/2 X 1/2 SAE S/T Heating Components Ordering Information Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 027268 027769 027766 027764 056932 057153 056294 065527 065748 065861 044733 044846 094038 071757 050563 050842 051176 083378 Description Motors Cage Assemblies & Gaskets Connections Electrical Flanges EMERSON CLIMATE PCN TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE ZZ SERIES for Ultra Low Temperatures 027770 027771 Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 45 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE LCL Take-Apart-DeSuperheating The LCL Take-Apart series is a desuperheating (Liquid Injection) valve used in conjunction with hot gas bypass to prevent excessive suction line superheat. LCL valves can be used for interstage cooling in compound systems. Features • Stainless steel power element eliminates corrosion and prevents valve failure • Take-Apart construction for easy field service Specifications Options • Interchangeable, replaceable cages for Maximum working pressure: 450 psig versatility • External superheat adjustment • Interchangeable body flanges • Interchangeable power assemblies Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Nomenclature example: LCLE 2 B 5 FT 3/8 x 1/2 ODF S/T LCL Valve Series DeSuperheating Liquid Injection Take-Apart E Equalizer E=External (Omit for Internal) 2 Capacity Nominal NOTE: This is not system capacity (See hot gas bypass charts for valve sizing) B Refrigerant Code 5 FT Capillary Tube Length 3/8 x 1/2 Inlet x Outlet Connection Sizes ODF Connection Type (See hot gas bypass charts for valve selection) 5 FT (std) (see table below) SAE = flare LCL (LA) Charge Codes Saturated Suction TEMP 40°F 30°F 20°F 10°F 0°F -10°F -20°F -30°F -40°F R-134A Required Suction Gas 45°F 65°F -B (GL) B (GL) B (GL) B (GL) C (UL) B (GL) C (UL) C (UL) C (UL) C (UL) C (UL) C (UL) C (UL) C (UL) C (UL) C (UL) C (UL) ODF=solder S/T Configuration ANG = 90° angle S/T = straightthru Ordering Information Refrigerant R-22 Required Suction Gas 45°F 65°F -A (CL) -A (CL) A (CL) B (GL) B (GL) B (GL) B (GL) B (GL) B (GL) C (UL) B (GL) C (UL) C (UL) C (UL) C (UL) C (UL) ( ) Denotes LA Series valve charge code. PCN By Charge R-404A/R-507 Required Suction Gas 45°F 65°F ---A (CL) -A (CL) A (CL) B (GL) A (CL) B (GL) B (GL) B (GL) B (GL) C (UL) B (GL) C (UL) B (GL) C (UL) Equalizer Description Type LCL 1 LCL 2 LCL 3 LCL 6 LCLE 1 LCLE 2 LCLE 3 LCLE 4 Internal 1/4””SAE External Select From Table Below A 022018 022005 055093 047759 055096 022003 021991 -- B 022017 021996 021987 --021997 021985 061054 C -045527 -----055097 Connections Same as TCL & TCLE NOTE: Add charge suffix symbol “A”, “B”, or “C” based on the following table. Example: LCLE4-A Replacement Valve Guide If have: LA(E)S 1/2 LA(E)S 1 LA(E)S 2 LA(E)S 3 LA(E)S 5 LCL 5 LCLE 5 LCL 8 LCLE 8 Replace with: LCL 1 LCL 2 LCL 3 LCL 4 LCL 6 LCL 6 LCLE 6 LCL 9 LCLE 9 Note: Valve sizes LCL5, LCL8, LCLE5 and LCLE8 are OBSOLETE. K-115 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 46 LCL(E) Dimensional Data (in) LCL Angle A 0.25 0.38 0.38 0.50 0.63 B 0.38 0.50 0.63 0.63 0.88 C MIN. 0.31 0.31 0.31 0.38 0.50 D MIN. E F G H J 0.31 0.38 0.50 0.50 0.75 3.06 3.19 3.19 2.91 3.03 3.16 3.16 3.56 1.50 1.63 1.63 1.34 1.47 1.59 1.59 2.00 1.13 1.13 1.38 0.94 1.06 1.06 1.90 1.69 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 4.14 4.14 4.39 3.95 4.11 4.11 4.20 4.83 E 1.78 1.78 1.97 1.41 1.41 1.41 1.59 1.59 1.59 1.59 1.94 F 1.98 2.16 1.56 1.58 1.63 1.56 1.63 1.63 1.94 2.38 2.38 G 3.70 3.70 3.70 3.69 3.69 3.70 3.69 3.70 3.70 3.70 3.81 Connection Size Inlet Outlet 3/8 SAE 1/2 SAE 3/8 SAE 5/8 SAE 1/2 SAE 1/2 SAE 3/8 ODF 1/2 ODF 3/8 ODF 5/8 ODF 1/2 ODF 1/2 ODF 1/2 ODF 5/8 ODF 5/8 ODF 5/8 ODF 5/8 ODF 7/8 ODF 5/8 ODF 1-1/8 ODF 7/8 ODF 1-1/8 ODF A B C MIN. D MIN. 0.38 0.38 0.50 0.50 0.63 0.63 0.88 0.88 0.50 0.63 0.50 0.63 0.63 0.88 1.13 1.13 0.31 0.31 0.38 0.38 0.50 0.50 0.50 0.75 0.38 0.50 0.38 0.50 0.50 0.75 0.91 0.91 J 0.69 0.69 0.69 0.69 0.67 0.69 0.67 0.69 0.69 0.69 0.69 Remote Bulb Dimensions 5 10 15 or 20 Standard Remote Bulb Diameter Length 3-1/16 3-9/16 4-13/16 5/8 Tools & Instruments [ K-116 Refrigeration Capillary Tubing Length (Ft) Accessories, Supplies & Commodities Oils & Chemicals Allow 2-1/8” above valve for removal of power assembly. H 0.38 0.38 0.38 0.38 0.36 0.38 0.36 0.38 0.38 0.38 0.38 Thermostats LCL Straight Thru Indoor Air Quality Heating Components Electrical Connection Size Inlet Outlet 3/8 SAE 1/2 SAE 3/8 SAE 5/8 SAE 1/2 SAE 5/8 SAE 1/4 ODF 3/8 ODF 3/8 ODF 1/2 ODF 3/8 ODF 5/8 ODF 1/2 ODF 5/8 ODF 5/8 ODF 7/8 ODF Motors EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE LCL Take-Apart-DeSuperheating Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 47 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE LA(E) Series DeSuperheating SAE Connection Size Inlet 1/4 SAE 3/8 SAE 3/8 SAE 1/4 SAE 1/4 SAE 3/8 SAE Outlet 3/8 SAE 3/8 SAE 1/2 SAE 1/2 SAE 5/8 SAE 5/8 SAE A MIN 1.50 1.64 1.64 1.50 1.50 1.64 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-117 B MIN 1.64 1.64 1.72 1.72 1.98 1.98 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 48 Refrigeration Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE EX2 Pulse Modulated Electric Electrical Motors The EX2 is an electrically driven expansion valve designed for use with R-12, R-22, R-134a, R-404A, R-407C, and R-502. Features • Pulse width modulation provides very precise temperature control • Dampened plunger reduces noise and effects of “water hammer” • Shut off function eliminates the necessity of a separate solenoid valve Options • One valve body can be combined with 6 orifices to make 6 capacity ranges up to 2.7 tons R-22. Specifications • Designed for 15 year life or 80 million cycles at 15 sec. duty cycle • Maximum Working Pressure: 400 psig MOPD, 500 psig • ASC2X Coils: 24V/60Hz, 120V/60Hz • UL/CUL file number: MP604 NOTE: This valve requires a ASC2X type coil assembly. ASC2X type coil requires cable assembly PCN:059261. Nomenclature example: EX2 1/4 x 3/8 EXO-001 ASC2X 120V 1/4 Inlet Connection 3/8 Outlet Connection EXO-001 Orifice ASC2X 120V Coil Heating Components EX2 Valve Series Thermostats Indoor Air Quality Dimensional Data Liquid Capacity Table in Tons @ 100% Duty Cycle The liquid capacity table below quotes capacities at 100% duty cycle (i.e. the valve is open continuously). However, it is recommended to operate the valve at partial load (50-80%) to allow for system load fluctuations. The valve operates with a 6 second pulse width cycle. Partial capacity can be calculated by proportioning the actual pulse time relative to 6 seconds (i.e. 3 second pulse width cycle time = 50% valve capacity). PCN Orifice # R-134a Tons (kW) R-22 Tons (kW) 064570 064569 064499 064500 064501 064502 064497 EXO-00X EXO-000 EXO-001 EXO-002 EXO-003 EXO-004 No Orifice Used 0.2 (0.7) 0.3 (1.2) 0.7 (2.5) 0.9 (3.3) 1.6 (5.6) 2.4 (8.5) 3.7 (13.3) 0.2 (0.9) 0.4 (1.6) 0.9 (3.2) 1.2 (4.3) 2.0 (7.2) 3.1 (10.9) 4.8 (17.2) R-404A / R-507 Tons (kW) 0.17 (0.6) 0.3 (1.1) 0.65 (2.3) 0.85 (3.0) 1.45 (5.1) 2.19 (7.7) 3.44 (12.1) R-407C Tons (kW) R-744 Tons (kW) 0.28 (1.0) 0.48 (1.7) 1.0 (3.5) 1.34 (4.7) 2.22 (7.8) 3.36 (11.8) 5.32 (18.7) 0.51 (1.8) 0.94 (3.3) 1.85 (6.5) 2.47 (8.7) 4.15 (14.6) 6.31 (22.2) 9.95 (35.0) Nominal capacities shown in this table are based on 40°F evaporating temperature, 100°F condensing temperature and 100 psig pressure drop across the valve. K-118 Accessories, Supplies & Commodities Description EX2 3/8 x 1/2 ASC2X 24/60 ASC2X 120/60 Tools & Instruments PCN 064497 064503 064504 Refrigeration Device Electronic Expansion Valve 24V/60Hz Coil 120V/60Hz Coil Oils & Chemicals Ordering Information Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 49 Motors EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE ACP(E) Automatic The ACP is designed for small cooling units where the heat load is reasonably constant. The ACP is ideal for room air conditioners, domestic refrigerators, drink dispensers, food dispensers, ice cream cabinets, bottle coolers, home freezers, ice cube makers, ice cream freezers, and milk coolers. Features • Friction-free floating design • Can be used as a small capacity hot gas bypass valve • Fully adjustable from 0-80 psig (factory setting 40 psig) Specifications • Wrench flats on inlets and outlets • Maximum working pressure: 450 psig Options • Maximum working temperature: 300°F • Internal or external equalizer • UL/CUL file number: SA5312 • SAE or ODF connections • Adjustable or non-adjustable REFRIGERATION Compressors, Chillers, Condensers Refrigeration Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Note: When Ordering Apply ALC –As Prefix to PCN Number. Example ALC -054366 Nomenclature example: ACPE 6 SAE EE 1/4 x 3/8 ODF ANG ACP Valve Series E Equalizer E=External (optional) 6 Port Size (diameter) SAE EE External Equalizer Type 1/4 x 3/8 Inlet x Outlet Connection Sizes see table below ODF Connection Type ODF or SAE ANG Body Style ANG = Angle S/T = Straight-thru Ordering Information PCN Description 046838 057233 047680 056240 046839 047651 047283 046840 047105 047101 047284 047332 053374 049204 047653 047654 047285 047655 047657 057209 057771 052773 047658 047280 047790 048657 058674 ACP 1 IE 1/4 x 3/8-1/2 SAE ANG ACP 1 IE 1/4 x 3/8 ODF S/T ACP 1 IE 1/4 x 3/8 ODF ANG ACP 1 IE 1/4 X 3/8 SAE ANG ACP 2 IE 1/4 X 3/8 SAE ANG ACP 2 IE 1/4 x 3/8 ODF ANG ACP 3 IE 1/4 X 3/8 ODF ANG ACP 3 IE 1/4 x 3/8 SAE ANG ACP 4 IE 1/4 x 3/8 ODF ANG ACP 4 IE 1/4 X 3/8 SAE ANG ACP 5 IE 1/4 x 3/8 ODF ANG ACP 5 IE 1/4 X 3/8 SAE ANG ACP 5 IE 3/8 x 3/8 ODF ANG ACP 5 IE 3/8 X 3/8-1/2 SAE ANG ACP 6 IE 1/4 x 3/8 SAE ANG ACP 7 IE 3/8 x 1/2 ODF ANG ACP 7 IE 3/8 x 3/8-1/2 SAE ANG ACP 8 IE 3/8 x 1/2 ODF ANG ACP 9 IE 3/8 X 1/2 ODF ANG ACP 9 IE 3/8 X 3/8 ODF ANG ACP 9 IE 1/2 x 5/8 ODF ANG ACP 9 IE 1/4 X 3/8 ODF ANG ACP 9 IE 3/8 x 3/8-1/2 SAE ANG ACPE 1 SAE EE 1/4 x 3/8 SAE S/T ACPE 7 SAE EE 3/8 x 1/2 ODF ANG ACPE 9 SAE EE 3/8 x 1/2 ODF S/T ACPE 9 SAE EE 1/2 x 5/8 ODF S/T ACP(E)- Nominal* Capacity Table in Tons Valve ACP(E)1 ACP(E)2 ACP(E)3 ACP(E)4 ACP(E)5 ACP(E)6 ACP(E)7 ACP(E)8 ACP(E)9 Port Diameter (in) 0.05 0.06 0.10 0.11 0.13 0.14 0.17 0.20 0.23 R-12/R-134a R-407C/R-22 Pressure Drop Across Valve – PSI 100 0.44 0.57 0.91 1.30 1.96 2.67 3.28 3.75 5.32 60 0.31 0.41 0.65 0.90 1.40 1.90 2.30 2.70 3.80 R-502/R404A/R-507 100 0.29 0.38 0.61 0.87 1.31 1.78 2.19 2.50 3.55 *All capacities shown are at 100°F Condensing, 40°F Evaporator Temperature, with a solid column of liquid at the valve inlet. K-119 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 50 EMERSON CLIMATE TECHNOLOGIES-THERMOSTATIC EXPANSION VALVE ACP(E) Automatic Electrical Motors ACP Dimensional Data Compressors, Chillers, Condensers Refrigeration F MIN. — — — — — — 0.32 3/8 0.37 3/8 0.37 1/2 Angle ODF ACP(E) Valve Type Straight-Thru SAE 5/8 1/2 7/8 1.38 1.25 1.19 1.25 1.19 Inlet Outlet A 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1.50 1.64 1.72 1.50 1.64 1.72 1.25 3/8 - 1/2 5/8 3/8 3/8 1/2 Straight-Thru ODF 0.50 — B 1/2 7/8 4.50 2.13 4.61 2.23 4.55 2.17 0.32 0.38 0.62 0.50 0.62 0.25 0.37 0.25 0.50 0.50 0.32 0.32 0.32 0.38 0.50 0.87 E DIA. F MIN. G DIA. H MIN. — — — 1.72 1.98 1.19 0.25 0.32 0.37 0.32 0.37 0.50 1.19 1.38 1.25 1.19 1.25 1.19 L 0.38 0.50 5/8 — K 0.38 0.75 4.73 4.55 5.11 2.36 2.17 2.73 K L M 4.25 1.88 1.48 1.64 1/2 5/8 1/4 3/8 1/4 1/2 3/8 0.50 H MIN. 0.32 1.19 1/2 5/8 1/4 3/8 1/4 1/2 G DIA. — — — — — — Indoor Air Quality — E DIA. — — — — — — 0.25 Thermostats 5/8 B Oils & Chemicals 3/8 - 1/2 A 1.50 1.64 1.72 1.50 1.64 1.72 1.25 1.38 1.19 0.32 0.38 0.38 0.62 0.25 0.37 0.25 0.50 0.37 0.50 0.32 0.32 0.32 0.38 0.32 K-120 0.62 0.50 0.87 0.87 0.50 0.38 0.75 0.75 Accessories, Supplies & Commodities Outlet 3/8 Tools & Instruments Angle SAE Inlet 1/4 3/8 1/2 1/4 3/8 1/2 1/4 Refrigeration ACP(E) Valve Type Heating Components Dimensional Data (in) Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 51 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-EX Valves & Controls EX4-EX8 Electrical Control Valve The EX4-EX8 are stepper motor driven valves that are optimized for the control of liquid or gaseous mass flow in refrigeration systems. Multifunction capability as expansion valve, hot gas bypass, suction gas throttling, head pressure, liquid line actuator and other applications systems. Features • Fully hermetic design • Fast full stroke time • Applicable to all common refrigerants (HCFC, HFC), for subcritical CO2 applications • High resolution and excellent repeatability • Bi-flow versions for heat pump applications • Positive shut-off function to eliminate the use of an additional solenoid valve • Linear flow capacity • Wide capacity range (10 - 100%) • Continuous modulation of mass flow, no stress (liquid hammering) in the refrigeration circuit • Direct coupling of motor and valve for high reliability (no gear mechanism) • Ceramic slide and port for accurate flow and minimal wear • Balanced force design • Corrosion resistant stainless steel body, and connections Specifications EX4/EX5: not required • CE marking: EX6-EX8: required, Cat I, Module A EX4-EX7: 505 psid, EX8: 435 psid • MOPD: 650 psig • MWP: -40°F to +130°F • Ambient temperature: 5 to 95% R.H. • Humidity: • External leakage: ≤ 0.1 oz/yr (R-22) Bi-polar, phase current by chopper control • Stepper motor type: (constant current) 4 pin terminal via plug • Electrical connection: Recommended: 24 VDC • Driver supply voltage: Range: 18-36 VDC EX4-EX6: 500 mA max • Phase current (operating): EX7: 750 mA EX8: 800 mA EX4-EX6: 100 mA • Holding current: EX7: 250 mA EX8: 500 mA EX4-EX6: 3.5W • Nominal input power per phase: EX7-EX8: 5W EX4-EX6: 30 mH ±25% • Phase inductance: EX7: 20 mH ±25% EX8: 22 mH ±25% 2 phase full step • Step mode: 1.8° per step ±8% • Step angle: EX4-EX6: 750 full steps • Total number of steps: EX7: 1600 full steps EX8: 2600 full steps 500 Hz • Stepping rate: EX4-EX6: 13 ohm ±10% • Winding resistance per phase: EX7: 8 ohm ±10% EX8: 6 ohm ±10% EX4-EX6: 1.5 seconds • Full travel time: EX7: 3.2 seconds EX8: 5.2 seconds K-121 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 52 EMERSON CLIMATE TECHNOLOGIES-EX Valves & Controls EX4-EX8 Electrical Control Valve Dimensional Data (in) Inlet x Outlet (ODF) 3/8” x 5/8” 5/8” x 7/8” 7/8” x 1-1/8” 1-1/8” x 1-3/8” 1-5/8” x 1-5/8” B 0.3 0.4 0.6 0.8 0.8 C 1.8 2.2 2.6 3.1 3.1 D 2.2 2.6 3.0 3.2 3.1 E 0.4 0.6 0.7 0.9 0.8 H1 4.4 4.4 4.4 6.2 7.9 H2 1.0 1.0 1.0 1.7 2.2 R-134a .3 – 3.6 1.1 – 11.1 2.8 – 26.4 7.1 – 72.5 19.9 – 193.4 R-404A .3 – 3.3 1.1 – 10 2.8 – 23.9 7.1 – 65.4 17.1 – 174.3 R-410A .6 – 5.5 1.7 – 16.5 4.3 – 39.8 11.4 – 109.5 28.4 – 292 R-23 .6 – 5.1 1.4 – 15.4 3.7 – 37 – – R-124 .3 – 2.6 .9 – 8 2 – 19.1 – – R-744 .9 – 9.5 2.8 – 29 6.8 – 69.4 19.9 – 190.5 51.2 – 508.7 Note 1: EX Bi-flow versions are not released for use with R-124 and R-23 refrigerants. Note 2: EX Bi-flow versions have identical capacity in both flow direction Refrigerant Evaporating Temperature Condensing Temperature Subcooling R-22, R-134a, R-404A, R-410A +40 °F +100°F 2°F R-407C +40°F dew point +100°F bubble 2°F R-124 +68°F +176°F 2°F R-23 -76°F -13°F 2°F R-744 -40°F 14°F 2°F The nominal capacity is based on the following conditions: Ordering Information Inlet Connection (in) Outlet Connection (in) Reference # PCN Description 3/8 5/8 7/8 1 1/8 1 5/8 N/A 5/8 7/8 1 1/8 1 3/8 1 5/8 N/A 800615 800618 800620 800624 804631 804652 097719 097720 097721 097722 097723 097718 EX4 Electrical Control Valve EX5 Electrical Control Valve EX6 Electrical Control Valve EX7 Electrical Control Valve EX8 Electrical Control Valve Valve Connector Cable Tools & Instruments Type EX4-I21 EX5-U21 EX6-I21 EX7-I21 EX8-I21 EX5-N60 Indoor Air Quality R-22 .6 – 4.7 1.4 – 14.2 4.3 – 34.1 10 – 93.8 25.6 – 250.2 Thermostats R-407C .6 – 5 1.4 – 15.1 4.3 – 35.8 10 – 98.7 28.4 – 263 K-122 Refrigeration Valve Type EX4 EX5 EX6 EX7 EX8 Oils & Chemicals Nominal Capacities in Tons (10% - 100%) Nominal capacities as expansion valves and liquid injection valves Accessories, Supplies & Commodities EX4/EX5/EX6/EX7/EX8 Heating Components Electrical Motors Valve Type EX4-I21 EX5-U21 EX6-I21 EX7-I21 EX8-I21 Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 53 Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-EX Valves & Controls EXD-U00 Universal Driver Module The EXD-U00 is a universal driver that enables the operation of Emerson stepper motor driven valves used in applications such as solenoid valves, electronic expansion valves, hot gas bypass or evaporator pressure regulator as capacity control, crankcase pressure regulator, heat reclaim regulator, and liquid level control. Features • Valve opening is proportional to 4-20mA or 0-10V analog input signal • Plug and play, no parameter settings required • Digital input can be used to force valve closing • Dip-switches for selection of EX control valve type, analog input and start mode Specifications 24V AC ±10%, 50-60HZ, 24V DC ±10% • Supply voltage: To be protected by a 0.8A external fuse • Supply current: 10VA in conjunction with EX valve • Power consumption: Storage: -5°F to +150°F • Temperature: Operating: 32°F to +140°F < 90% R.H. non condensing • Humidity: EMC EN 61326-1, EN50081, EN50082 • Approvals: CE • Marking: 4-20 mA • Input analogue signal: Burden 364 ǡ 0-10V Impedence 27Kǡ 24V AC ±10%, 50-60Hz, 24V DC ±10% • Digital input: Via 4 wires cable, maximum 6m length AWG • Connection to EX4-8: 20/22 Screw terminals for wire size 12/20 AWG • Connector: DIN rail mounted • Mounting: Aluminum • Housing: Type Reference # PCN Description EXD-U00 K09-U00 804557 804559 097710 097711 Universal Driver Module Electrical Terminal Kit Dimensional Data (in) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Ordering Information K-123 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 54 Motors Electrical Heating Components Indoor Air Quality Thermostats EMERSON CLIMATE TECHNOLOGIES-EX Valves & Controls EC3-X32 Superheat Controller The EC3 is a stand-alone universal superheat controller for stable superheat control with stepper motor driven electronic control valves and is used for air conditioning, refrigeration and industrial applications such as chillers, industrial process cooling rooftops, heat pumps, package units, close controls, cold room, food process and air driers. With the EC3-X32, parameters can be downloaded through ECD-002 or through TCP/IP compatible interface. Features • Superheat control in conjuction with Emerson stepper motor driven electrical control valves EX4-EX8 • Limitation of evaporating pressure (MOP) • Low and high superheat alarm • Low pressure switch function/alarm • Freeze protection function/alarm • Pump down function • Monitoring of sensors and sensor wiring and detection of sensor and wiring failures • Intelligent alarm management to protect the compressor, i.e fail safe operation • Integral rechargeable battery to close EX control valves in case of power loss. • Support of TCP/IP Ethernet technology with WebServer functionality allows monitoring and configuration of controllers through a standard WebBrowser • Electrical connection via plug-in type screw terminal • Aluminum housing for DIN rail mounting Specifications 24VAC ± 10%, 50/60 Hz • Supply voltage: 24VAC ± 10%, 50-60 Hz, 24VDC ± 10% • Digital input: 25 VA max. including connected EX valve and display/keyboard • Power consumption: Approx. 2 hours if battery is fullly empty • Internal battery charging time: Removable screw version, wire size 12-20 AWG • Plug-in connector size: 1/4 in. spade earth connector • Ground connection: EMC, LVD, RoHS (EN 61326, • Applied directive: EN 50081, EN 61000-6-2, EN 61000-4-2, EN 61000-4-3, EN 610004-4, EN61000-4-5, EN 61000-4-6, EN 61000-4-11) CE • Marking: Storage, -5°F, to +150°F • Temperatures: Operating, 32°F, to +140°F 0 – 80% R.H. non condensing • Humidity: Compressors, Chillers, Condensers Refrigeration Reference # PCN Description 807782 807644 804497 ** 802332 802333 802334 804805 807657 807861 097708 097709 097714 ** 097715 097716 097728 097717 097712 097713 Superheat Controller Terminal Kit Temperature Sensor Electrical Control Valve Pressure Sensors (R-22/F-124/ R-134a/R-404A/R-407C/R507C) Pressure Sensor (R-410A) Pressure Sensor (R-744) Plug and Cable Assembly for Pressure Sensor Optional Display/Keypad Cable Connection between EC3-X32 and ECD-002 **For further details refer to the EX4-EX8 product page. K-124 Refrigeration Tools & Instruments Dimensional Data Accessories, Supplies & Commodities Type EC3-X32 K03-X32 ECN-N60 EX4-EX8** PT4-07M PT4-18M PT4-30M PT4-M60 ECD-002 ECC-N30 or any standard Cat 5 patch cord with RJ45 connectors Oils & Chemicals Ordering Information Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 55 EMERSON CLIMATE TECHNOLOGIES-EX Valves & Controls EC3-X33 Superheat Controller The EC3 is a stand-alone universal superheat controller for stable superheat control with stepper motor driven electronic control valves and is used for air conditioning, refrigeration and industrial applications such as chillers, industrial process cooling rooftops, heat pumps, package units, close controls, cold room, food process and air driers. The EC3-X33 requires the use of the ECD-002 display key pad unit for setting up the controller. Features • Superheat control in conjuction with Emerson stepper motor driven electrical control valves EX4-EX8 • Limitation of evaporating pressure (MOP) • Low and high superheat alarm • Monitoring of sensors and sensor wiring and detection of sensor and wiring failures • Intelligent alarm management to protect the compressor, i.e fail safe operation • Integral rechargeable battery to close EX control valves in case of power loss. • Electrical connection via plug-in type screw terminal • Aluminum housing for DIN rail mounting Specifications • Supply Voltage: • Digital Input: • Power Consumption: • • • • 24VAC ± 10%, 50/60 Hz 24VAC ± 10%, 50-60 Hz, 24VDC ± 10% 25 VA max. including connected EX valve and display/keyboard Approx. 2 hours if battery is fullly empty Removable screw version wire size 12-20 AWG 1.4 in. spade earth connector EMC, LVD, RoHS EN 61326, EN 50081, EN 61000-6-2, EN 61000-4-2, EN 61000-4-3, EN 610004-4, EN61000-4-5, EN 61000-4-6, EN 61000-4-11) CE Storage: -5°F to +150°F Operating: 32°F to +140°F 0 – 80% R.H. non condensing Internal battery charging time: Plug-in connector size: Ground connection: Applied Directive: • Marking: • Temperatures: • Humidity: Ordering Information Type Reference # PCN Description EC3-X33 K03-X32 ECN-N60 EX4-EX8** PT4-07M PT4-18M PT4-30M PT4-M60 ECD-002 ECC-N30 or any standard Cat 5 patch cord with RJ45 connectors 807783 807644 804497 ** 802332 802333 802334 804805 807657 807861 097707 097709 097714 ** 097715 097716 097728 097717 097712 097713 Superheat Controller Terminal Kit Temperature Sensor Electrical Control Valve Pressure Sensors (R-22/F-124/ R-134a/R-404A/R-407C/R507C) Pressure Sensor (R-410A) Pressure Sensor (R-744) Plug and Cable Assembly for Pressure Sensor Optional Display/Keypad Cable Connection between EC3-X33 and ECD-002 **For further details refer to the EX4-EX8 product page. Dimensional Data Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-125 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 56 • Connecting cable: with RJ45 connectors • Temperatures: • Humidity: • Mounting: Ordering Information Device Reference # PCN Description ECD-002 ECC-N30 or any standard Cat 5 patch cord with RJ45 connectors 807657 807861 097712 097713 Optional Display/Keypad Cable Connection between EC3-X33 and ECD-002 Motors • Display LED: From EC3 Series controller via connecting cable Valve opening, valve closing, alarm, demand Segmented display, 2-1/2 digits with automatic decimal point between ±19.9, switchable between °C and °F ECC-N30 or standard CAT5 patch cord Storage, -5°F to +150°F Operating, 32°F to +140°F 0 - 80% R.H. non condensing Panel mount (2.8 x 1.1 inch cutout) Electrical Specifications • Supply: • LED indicators: Heating Components EMERSON CLIMATE TECHNOLOGIES-EX Valves & Controls EDC-002 Display Unit The EDC-002 is a display/keypad unit necessary for setting up controllers. Features • Front panel mounted interface for parameter and status read-out and for controller setup via keypad • Indicator LEDs for valve opening/closing, demand and alarm Compressors, Chillers, Condensers Refrigeration K-126 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Dimensional Data Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 57 EMERSON CLIMATE TECHNOLOGIES-EX Valves & Controls PT4 Pressure Transmitters The PT4 Pressure Transmitters convert a pressure into a linear electric output signal. At the heart of the transmitter there is a piezo resistive chip enclosed in an oil capsule. Features • Pressure senstive piezo-based cell with strong primary output signal for precise operation • Compact dimensions • Vibration, shock and pulsation resistant • Reduced full scale error over complete temperature range • Sealed gauge absolute pressure reference for increased accuracy independent of atmospheric pressure variation • Output signal is 4 to 20 mA • Calibrated for specific temperature and pressure ranges to fulfill application demands in air conditioning and refrigeration systems • Easy-to-install M12 electrical connection with pre-assembled cable assembly • Pressure connector 7/16-20 UNF with Schrader valve Specifications Nominal 24 VDC • Supply voltage: Range (polarity protected) 8 – 30 VDC < 1 Vp-p • Permissible noise & ripple: < 0.02 % FS/V • Influence of supply voltage: • Operating current: 4 to 20 mA ouput, Max. ≤ 24 mA • Load resistance: RL ≤ Ub-8.0V 0.02A Non-position sensitive • Mounting position: 1 ms • Response time: Ambient: -40°F to +176°F • Temperatures: Medium: -58°F to +275°F Storage: -40°F to +185°F • Sensor Life: PT4-07/-18/-30/-50 : ≥5,000,000 cycles full stroke at 77°F • Burst Pressure: • Electrical connection: • Approvals: ≥2176 psi PT4-M60 CE marking according to PED, not allowed (SEP) CE marking according to EMC, CE marked HFC, HCFC, CFC (not suitable for ammonia and flammable refrigerants!) Max. 4 g Stainless steel housing, pressure connector and diaphragm in contact with sensed medium • Medium compatibility: • Vibration at 10 – 2000 Hz: • Materials: Ordering Information Type Reference # PCN Description PT4-07M PT4-18M PT4-30M PT4-M60 802332 802333 802334 804805 097715 097716 097728 097717 Pressure Transmitter Pressure Transmitter Pressure Transmitter Plug/Cable Assemblies Dimensional Data (in) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-127 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 58 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils Quick Select Guide – Refrigeration Applications * 3 psi pressure drop per ARI Standard 760. Quick Select Guide – Specialty Applications Motors Tools & Instruments Application Pressure Differential – Liquid Line Direct Acting – Three Way Low Pressure Water Solenoid (Dump Valve) Unloader Valve 15.6 23.3 30.5 34.9 58.0 95.4 3.1 4.8 5.6 8.2 10.0 15.6 15.6 23.3 30.5 34.9 58.0 95.4 K-128 Refrigeration Valve 710/713RA 702RA 207CB 703RC 2.3 2.3 4.2 4.2 4.2 7.3 7.3 7.3 8.1 8.1 8.1 8.6 8.6 Electrical 50RB 100RB2 200RB2 200RB3 200RB4 200RB5 200RB6 200RB7 200RB9 200RB12 200RD 2T2 200RD 2T3 200RD 3T2 200RD 3T3 200RD 3T4 200RD 4T3 200RD 4T4 200RD 4T5 200RD 5T3 200RD 5T4 200RD 5T5 200RD 6T4 200RD 6T5 240RA8 240RA9 (5/8) 240RA9 (1-1/8) 240RA12 240RA16 240RA20 500RB2 500RB3 500RB4 500RB5 500RB6 500RB7 540RA8 540RA9 (5/8) 540RA9 (1-1/8) 540RA12 540RA16 540RA20 Heating Components Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Closed Solenoid Valve Two Way, Normally Open Solenoid Valve Two Way, Normally Open Solenoid Valve Two Way, Normally Open Solenoid Valve Two Way, Normally Open Solenoid Valve Two Way, Normally Open Solenoid Valve Two Way, Normally Open Solenoid Valve Two Way, Normally Open Solenoid Valve Two Way, Normally Open Solenoid Valve Two Way, Normally Open Solenoid Valve Two Way, Normally Open Solenoid Valve Two Way, Normally Open Solenoid Valve Two Way, Normally Open Solenoid Valve Nominal Liquid Capacity R-410A (in tons)* Indoor Air Quality Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Liquid Line Discharge Gas Suction Line Nominal Liquid Capacity R-22 (in tons)* .54 1.3 3.1 4.8 5.6 8.2 10.0 15.6 30.5 34.9 Thermostats Valve Oils & Chemicals Feature Accessories, Supplies & Commodities Application Compressors, Chillers, Condensers Refrigeration Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 59 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 50RB The 50RB is a direct-acting, 2-way, normally closed valve. 50RB valves are used for liquid or discharge gas refrigerant service. Features Specifications • Long-life molded coils • PTFE seat material • 30” leads • Extended ends for easy installation (standard) • Maximum fluid • Screw-on coil temperature: 250°F • 100 mesh inlet screen standard • Maximum working Options pressure: 500 psig • Connection sizes to fit your system 300 psig • MOPD: • Straight-thru or right angle design MH25894 • UL/CUL file number: • Replace with RMF coil NOTE: Mounting enclosing tube more than 90o off vertical up position is not recommended. Nomenclature example: 50RB 4T22 SML 120/50-60 50R B 4 Basic Valve Type Design Series Port Size (in 1/64”) T Connection Type T = ODF straight thru B = ODF right angle 2 Inlet Connection Size (in 1/8”) PCN CONNECTION SIZE COIL VOLTAGE/HZ R-12 R-134a R-22 063452 063511 063585 063587 063454 063513 1/4” ODF 1/4” ODF 1/4” ODF 1/4” ODF 1/4” ODF 1/4” ODF 120/50-60 220/50-60 24/50-60 24/50-60 120/50-60 220/50-60 1/4 (1.5) 1/4 (1.5) 1/4 (1.5) 1/4 (1.5) 1/4 (1.5) 1/4 (1.5) 0.5 (1.8) 0.5 (1.8) 0.5 (1.8) 0.5 (1.8) 0.5 (1.8) 0.5 (1.8) .54 (1.9) .54 (1.9) .54 (1.9) .54 (1.9) .54 (1.9) .54 (1.9) SML Coil (RMF as replacement) R-407C R-404A/R-507 .51 (1.8) .51 (1.8) .51 (1.8) .51 (1.8) .51 (1.8) .51 (1.8) .34 (1.2) .34 (1.2) .34 (1.2) .34 (1.2) .34 (1.2) .34 (1.2) 120/50-60 Coil Voltages R-502 Description .35 (1.2) .35 (1.2) .35 (1.2) .35 (1.2) .35 (1.2) .35 (1.2) 50RB 4 B 2 2 SML 50RB 4 B 2 2 SML 50RB 4 B 2 2 SML 50RB 4 T 2 2 SML 50RB 4 T 2 2 SML 50RB 4 T 2 2 SML Capacities based on 100°F liquid and 40°F saturated evaporator per ARI standard 760-87. *See Extended Capacity Tables for ratings at a wide range of conditions. Dimensional Data (in) Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments Refrigeration 2 Outlet Connection Size (in 1/8”) Ordering Information and Nominal* Liquid Capacity Table – Tons (kW) Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-129 Sec#10c Refridge 60pages 2011_Fridge 12/9/2010 3:16 PM Page 60 Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 100RB Motors The 100RB is a direct-acting, 2-way, normally closed valve. 100 RB valves are used for liquid or discharge gas refrigerant service. Features Specifications • One coil fits all valve sizes • Maximum fluid temperature: 250°F • Extended ends for easy installation (standard) • Maximum working • Long-life molded coils pressure: 500 psig • PTFE O-ring for superior external sealing • MOPD: 300 psig Options • UL/CUL file number: MP 604 • SAE or ODF connection sizes in 1/4” and 3/8”, 1/4” NPTF 2 VLC Valve Series Design Series Port Size (in 1/16”) Connection Type F = SAE S = ODF P = NPTF Connection Size (in 1/8”) Coil* *NOTE: Valves are shipped without the solenoid coils (VLC = Valve Less Coil). See coil assemblies for availability. Ordering Information and Nominal* Liquid Capacity Table – Tons (kW) PCN Product Description Connection Size R-12 R-134a R-22 R-407C R-404A/R-507 R-502 047503 047504 047505 047500 047501 047502 100RB 2S2 VLC 100RB 2S3 VLC 100RB 2S4 VLC 100RB 2F2 VLC 100RB 2F3 VLC 100RB 2P2 VLC 1/4” ODF 3/8” ODF 1/2” ODF 1/4” SAE 3/8” SAE 1/4” NPTF 1.0 (3.5) 1.0 (3.5) 1.0 (3.5) 1.0 (3.5) 1.0 (3.5) 1.0 (3.5) 1.2 (4.2) 1.2 (4.2) 1.2 (4.2) 1.2 (4.2) 1.2 (4.2) 1.2 (4.2) 1.27 (4.5) 1.27 (4.5) 1.27 (4.5) 1.27 (4.5) 1.27 (4.5) 1.27 (4.5) 1.21 (4.3) 1.21 (4.3) 1.21 (4.3) 1.21 (4.3) 1.21 (4.3) 1.21 (4.3) .85 (3.0) .85 (3.0) .85 (3.0) .85 (3.0) .85 (3.0) .85 (3.0) .83 (2.9) .83 (2.9) .83 (2.9) .83 (2.9) .83 (2.9) .83 (2.9) Capacities based on 100°F liquid and 40°F saturated evaporator per ARI standard 760-87. *See Extended Capacity Tables for ratings at a wide range of conditions. Dimensional Data (in) CONNECTION SIZE A B 1/4 ODF 3/8 ODF 1/2 ODF 1/4 SAE 3/8 SAE 4.63 4.63 4.63 3.10 3.47 0.31 0.31 0.38 - 100RB 2P2 VLC 1/4 NPTF 1.56 - K-130 Refrigeration Tools & Instruments Accessories, Supplies & Commodities VALVE 100RB 2S2 VLC 100RB 2S3 VLC 100RB 2S4 VLC 100RB 2F2 VLC 100RB 2F3 VLC Heating Components F Indoor Air Quality 2 Thermostats B Oils & Chemicals 100R Electrical NOTE: Mounting enclosing tube more than 90° off vertical up position is not recommended. Nomenclature example: 100RB 2F2 VLC Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 1 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 100RB Exploded View & Parts Kit Data Valve Repair Kit “K” indicates part is supplied in valve repair kit KS30112 (PCN 049191) Note: Universal (2/3 hole) spanner wrench X11981-1 (PCN 027451) included in complete repair kit. Coil Assembly See coil assemblies for availability. Parts Kit KG-10041 PCN: 054812 (Contains 12 pieces each of PTFE and neoprene O-rings.) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-131 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 2 Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 200RB The 200RB is a pilot-operated, 2-way, normally closed valve. 200RB valves are used for liquid, discharge, or suction gas refrigerant service. Features • One coil fits all valve sizes • Extended ends for easy installation (standard) • Long-life molded coils • PTFE O-ring for superior external sealing Electrical Heating Components 250°F 500 psig 2 psi 300 psig MP604 NOTE: Mounting enclosing tube more than 90o off vertical up position is not recommended. Nomenclature example: 200RD 4T3M VLC T 3 Valve Series Design Series Port Size (in 1/16”) Connection Type T = Copper Extended Ends Connection Size (In 1/8”) M M = manual stem T = mounting stud (optional) VLC Coil* *NOTE: Valves are shipped without the solenoid coils (VLC = Valve Less Coil). See available coil assemblies. Ordering Information and Nominal * Liquid Capacity - Tons (kW) o NOTE: Mounting enclosing tube more than 90 off vertical up position is not recommended. Nomenclature example: 200RB 4T3M VLC 200R Valve Series B Design Series 4 Port Size (in 1/16”) T Connection Type F = SAE S = ODF P = NPTF T = Copper Extended Ends 3 M VLC Connection Size (In 1/8”) M = manual stem T = mounting stud (optional) Coil* Tools & Instruments Accessories, Supplies & Commodities *NOTE: Valves are shipped without the solenoid coils (VLC = Valve Less Coil). See coil assemblies for availability. Indoor Air Quality 4 Thermostats D Oils & Chemicals 200R K-132 Refrigeration Specifications • Maximum fluid temperature: • Maximum working pressure: • Minimum operating pressure drop: • MOPD: • UL/CUL file number: Motors Options • Available in 8 orifice sizes • Manual stem or mounting stud • Bi-Flow operation-conversion either factory assembled or with kit (except 200RB 7,9 & 12) Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 3 Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 200RB Ordering Information and Nominal* Liquid Capacity Table – Tons (kW) PCN Standard Valve 053104 062611 053105 053106 052725 052726 052727 049608 049609 049692 047506 059728 047511 047516 047517 047518 058950 047519 059729 047524 049201 061227 057206 059730 059731 059732 059733 047537 047540 047544 056766 064037 064062 064063 064282 064762 064645 064767 064818 064821 --053236 054170 -056438 055855 -049585 -047508 047510 047513 047515 049162 049163 058045 047521 047523 047526 047528 054323 049164 049165 047531 047534 047536 047539 047542 047546 047548 --064562 064284 064764 064766 064769 064820 064823 N/A N/A N/A N/A 065620 065621 047507 047509 047512 047514 049186 049187 056518 047520 047522 047525 047527 049188 049189 047530 047533 047535 047538 047541 047545 047547 064267 064283 064763 064765 064768 064819 064822 Connection Size R-12 R-134a R-22 R-407C R-404A/R-507 R-502 Description 1/4 SAE 3/8 SAE 1/4 ODF 3/8 ODF 1/4 SAE 3/8 SAE 1/2 SAE 1/4 ODF 3/8 ODF 1/2 ODF 3/8 SAE 3/8 NPTF 3/8 ODF X 1/2 ODM 1/2 ODF X 5/8 ODM 3/8 ODF 1/2 ODF 5/8 ODF 1/2 SAE 5/8 ODF 1/2 ODF X 5/8 ODM 5/8 ODF 3/8 ODF 1/2 ODF 5/8 ODF 1/2 SAE 5/8 SAE 3/8 NPTF 1/2 ODF X 5/8 ODM 5/8 ODF 1/2 ODF 5/8 ODF 5/8 ODF X 7/8 ODM 1/2 ODF 5/8 ODF 7/8 ODF 5/8 ODF 7/8 ODF 1 1/8 ODF 7/8 ODF 1 1/8 ODF 2.4 (8.7) 2.4 (8.7) 2.4 (8.7) 2.4 (8.7) 3.7 (13.0) 3.7 (13.0) 3.7 (13.0) 3.7 (13.0) 3.7 (13.0) 3.7 (13.0) 4.4 (15.6) 4.4 (15.6) 4.4 (15.6) 4.4 (15.6) 4.4 (15.6) 4.4 (15.6) 4.4 (15.6) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 12.2 (43.4) 12.2 (43.4) 12.2 (43.4) 12.2 (43.4) 18.2 (65.6) 24.0 (85.0) 24.0 (85.0) 27.6 (97.6) 27.6 (97.6) 2.9 (10.4) 2.9 (10.4) 2.9 (10.4) 2.9 (10.4) 4.4 (15.6) 4.4 (15.6) 4.4 (15.6) 4.4 (15.6) 4.4 (15.6) 4.4 (15.6) 5.3 (18.6) 5.3 (18.6) 5.3 (18.6) 5.3 (18.6) 5.3 (18.6) 5.3 (18.6) 5.3 (18.6) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 9.4 (33.3) 9.4 (33.3) 9.4 (33.3) 9.4 (33.3) 9.4 (33.3) 9.4 (33.3) 9.4 (33.3) 14.8 (52.5) 14.8 (52.5) 14.8 (52.5) 14.8 (52.5) 22.0 (78.0) 28.9 (102.3) 28.9 (102.3) 33.2 (117.5) 33.2 (117.5) 3.1 (11.0) 3.1 (11.0) 3.1 (11.0) 3.1 (11.0) 4.8 (17.0) 4.8 (17.0) 4.8 (17.0) 4.8 (17.0) 4.8 (17.0) 4.8 (17.0) 5.6 (19.8) 5.6 (19.8) 5.6 (19.8) 5.6 (19.8) 5.6 (19.8) 5.6 (19.8) 5.6 (19.8) 8.2 (29.0) 8.2 (29.0) 8.2 (29.0) 8.2 (29.0) 8.2 (29.0) 8.2 (29.0) 8.2 (29.0) 10.0 (35.4) 10.0 (35.4) 10.0 (35.4) 10.0 (35.4) 10.0 (35.4) 10.0 (35.4) 10.0 (35.4) 15.6 (55.2) 15.6 (55.2) 15.6 (55.2) 15.6 (55.2) 23.3 (92.5) 30.5 (108.0) 30.5 (108.0) 34.9 (124.0) 34.9 (124.0) 2.9 (10.3) 2.9 (10.3) 2.9 (10.3) 2.9 (10.3) 4.5 (16.0) 4.5 (16.0) 4.5 (16.0) 4.5 (16.0) 4.5 (16.0) 4.5 (16.0) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 7.8 (27.7) 9.5 (33.6) 9.5 (33.6) 9.5 (33.6) 9.5 (33.6) 9.5 (33.6) 9.5 (33.6) 9.5 (33.6) 14.8 (52.4) 14.8 (52.4) 14.8 (52.4) 14.8 (52.4) 22.2 (78.6) 29.0 (103.0) 29.0 (103.0) 33.2 (128.0) 33.2 (128.0) 2.1 (7.4) 2.1 (7.4) 2.1 (7.4) 2.1 (7.4) 3.2 (11.3) 3.2 (11.3) 3.2 (11.3) 3.2 (11.3) 3.2 (11.3) 3.2 (11.3) 3.7 (13.1) 3.7 (13.1) 3.7 (13.1) 3.7 (13.1) 3.7 (13.1) 3.7 (13.1) 3.7 (13.1) 5.4 (19.1) 5.4 (19.1) 5.4 (19.1) 5.4 (19.1) 5.4 (19.1) 5.4 (19.1) 5.4 (19.1) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 10.3 (36.5) 10.3 (36.5) 10.3 (36.5) 10.3 (36.5) 15.3 (54.2) 20.1 (71.1) 20.1 (71.1) 23.0 (81.4) 23.0 (81.4) 2.0 (7.1) 2.0 (7.1) 2.0 (7.1) 2.0 (7.1) 3.1 (11.0) 3.1 (11.0) 3.1 (11.0) 3.1 (11.0) 3.1 (11.0) 3.1 (11.0) 3.6 (10.6) 3.6 (10.6) 3.6 (10.6) 3.6 (10.6) 3.6 (10.6) 3.6 (10.6) 3.6 (10.6) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 10.1 (35.8) 10.1 (35.8) 10.1 (35.8) 10.1 (35.8) 15.1 (53.0) 19.8 (70.1) 19.8 (70.1) 22.7 (80.4) 22.7 (80.4) 200RB 2 F 2 200RB 2 F 3 200RB 2 T 2 200RB 2 T 3 200RB 3 F 2 200RB 3 F 3 200RB 3 F 4 200RB 3 T 2 200RB 3 T 3 200RB 3 T 4 200RB 4 F 3 200RB 4 P 3 200RB 4 S 3 200RB 4 S 4 200RB 4 T 3 200RB 4 T 4 200RB 4 T 5 200RB 5 F 4 200RB 5 F 5 200RB 5 S 4 200RB 5 S 5 200RB 5 T 3 200RB 5 T 4 200RB 5 T 5 200RB 6 F 4 200RB 6 F 5 200RB 6 P 3 200RB 6 S 4 200RB 6 S 5 200RB 6 T 4 200RB 6 T 5 200RB 7 S 5 200RB 7 T 4 200RB 7 T 5 200RB 7 T 7 200RB 9 T 5 200RB 9 T 7 200RB 9 T 9 200RB 12 T 7 200RB 12 T 9 Refrigeration Tools & Instruments Accessories, Supplies & Commodities 1 Add “T” to the end of description for Mounting Stud Add “M” to the end of the description for Manual Stem Capacities based on 100°F liquid and 40°F saturated evaporator per ARI standard 760-87. *See Extended Capacity Tables for ratings at a wide range of conditions. 2 Ordering Information and Nominal Liquid Capacity Table for Bi-Flow Solenoids - Tons (kW) Standard Valve 009689 009690 009692 009693 009694 PCN Mounting Stud ------ Manual Stem ------ Connection Size 3/8 ODF 3/8 ODF 1/2 ODF 5/8 ODF 5/8 ODF R-12 3.7 (13.0) 4.4 (15.6) 6.5 (23.0) 6.5 (23.0) 7.8 (27.7) R-134a R-22 4.4 (15.6) 4.8 (17.0) 5.3 (18.6) 5.6 (19.8) 7.8 (27.7) 8.2 (29.0) 7.8 (27.7) 8.2 (29.0) 9.4 (33.4) 10.0 (35.4) K-133 R-407C R-404A/R-507 R-502 Description 4.5 (16.0) 5.3 (18.8) 7.8 (27.6) 7.8 (27.6) 9.5 (33.6) 3.2 (11.3) 3.7 (13.1) 5.4 (19.1) 5.4 (19.1) 6.5 (23.0) 3.1 (11.0) 3.6 (12.7) 5.3 (18.8) 5.3 (18.8) 6.5 (23.0) 200RB GS-1925 3 T 3 200RB GS-1926 4 T 3 200RB GS-1928 5 T 4 200RB GS-1929 5 T 5 200RB GS-1930 6 T 5 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 4 Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 200RB 200RB2-6 Dimensional Data (in) Without Extended Ends 0.56 – 0.56 3.12 Motors – 2.37 2.37 3.50 3.75 2.37 Electrical 0.50 0.56 – 3.50 3.75 A B 2.42 4.62 2.50 3.25 2.31 2.50 3.25 2.31 2.50 3.25 5.00 6.50 4.62 5.00 6.50 4.62 5.00 6.50 0.50 0.31 0.38 0.50 0.31 0.38 0.50 A 2.98 6.88 7.13 6.88 7.38 7.13 B C 3.69 0.53 4.05 0.68 With Extended Ends 1/8 3/16 Conn. Size & Style 1/4 ODF 3/8 ODF 1/4 ODF 3/8 ODF 1/2 ODF 1/4 5/16 3/8 5/8 ODF 3/8 ODF 1/2 ODF 5/8 ODF 3/8 ODF 1/2 ODF 5/8 ODF C 0.25 0.31 0.25 0.31 0.38 200RB7, 9 and 12 Dimensional Data (in) Valve 200RB7S5 200RB7T5 200RB7T7 200RB9T5 200RB9T6 200RB9T7 200RB9T9 200RB12T7 8.50 7.50 8.50 K-134 Refrigeration Tools & Instruments 200RB12T9 Port Size Conn. Size & Style 5/8 ODF x 7/8 ODM 5/8 ODF x 5/8 ODF 7/16 7/8 ODF x 7/8 ODF 5/8 ODF x 5/8 ODF 3/4 ODF x 3/4 ODF 9/16 7/8 ODF x 7/8 ODF 1 1/8 ODF x 1 1/8 ODF 7/8 ODF x 7/8 ODF 1 1/8 ODF x 1 1/8 3/4 ODF Heating Components 3/8 B – Indoor Air Quality Port Size 5/16 A Thermostats Valve 200RB 2T2 200RB 2T3 200RB 3T2 200RB 3T3 200RB 3T4 200RB 4T4 200RB 4T5 200RB 5T3 200RB 5T4 200RB 5T5 200RB 6T3 200RB 6T4 200RB 6T5 1/4 Conn. Size & Style 1/4 NPTF 3/8 NPTF 3/8 ODF x 1/2 ODM 1/2 ODF x 5/8 ODM 3/8 SAE (male flare) 3/8 NPTF 1/2 ODF x 5/8 ODM 5/8 ODF 1/2 SAE (male flare) 5/8 SAE (male flare) 3/8 NPTF 1/2 ODF x 5/8 ODM 5/8 ODF 1/2 SAE (male flare) 5/8 SAE (male flare) Oils & Chemicals Port Size Accessories, Supplies & Commodities Valve 200RB 4P2 200RB 4P3 200RB 4S3 200RB 4S4 200RB 4F3 200RB 5P3 200RB 5S4 200RB 5S5 200RB 5F4 200RB 5F5 200RB 6P3 200RB 6S4 200RB 6S5 200RB 6F4 200RB 6F5 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 5 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 200RB Valve Kits Exploded View & Parts Kit Data Valve Repair Kit “K” indicates part is supplied in valve repair kit KS30115. (PCN 049194) Gasket Kit Gasket Kit KG10025 (PCN 049190) (contains 12 pieces - each of PTFE and neoprene O-rings) Coil Assembly See coil assemblies for availability. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-135 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 6 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 200RB Valve Kits Valve Kits Motors N/A KS30377 KS30117 KS30117 KS30117 KS30361 KS30364 KS30364 Electrical KS30115 KS30115 KS30115 KS30115 KS30115 KS30354 KS30362 KS30365 Gasket Kit KS30293 KS30293 KS30293 KS30293 KS30293 N/A N/A N/A Heating Components 200RB2 200RB3 200RB4 200RB5 200RB6 200RB7 200RB9 200RB12 200RB2 200RB3 200RB4 200RB5 200RB6 200RB7 200RB9 200RB12 200RB2 200RB3 200RB4 200RB5 200RB6 200RB7 200RB9 200RB12 200RB2 200RB3 200RB4 200RB5 200RB6 200RB7 200RB9 200RB12 Bi-Flow Kit KG10025 KG10025 KG10025 KG10025 KG10025 KG00002 KG00003 KG00004 200RB Bi-Flow Conversion Tools & Instruments Accessories, Supplies & Commodities Standard 200RB uni-directional valves can be converted to Bi-Flow operation by replacing the internal parts with the components in kit KS30293 (PCN 056431). Unlike the standard valve which permits flow in one direction only when energized, the Bi-Flow version allows the valve to flow in either direction, depending on differential pressures, when energized. If the valve is not energized when flowing in the reverse direction, valve “flutter” will occur. Also, with the valve de-energized, a higher downstream pressure than upstream (back-flow) will force the valve open. NOTE: A 200RB7, 200RB9 and 200RB12 cannot be converted to a Bi-Flow valve. Indoor Air Quality 049194 049194 049194 049194 049194 064263 064825 064826 N/A 065695 053959 053959 053959 064831 064832 064832 056431 056431 056431 056431 056431 N/A N/A N/A 049190 049190 049190 049190 049190 064262 064830 064833 Manual Opening Kit Thermostats Complete Kit Oils & Chemicals Valve K-136 Refrigeration PCN Compressors, Chillers, Condensers Refrigeration Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 7 Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 200RD - R-410A The 200RD is a pilot-operated, 2-way, normally closed, R-410A valve. 200RD valves are used for liquid, discharge, or suction gas refrigerant service. Features • One coil fits all valve sizes • Extended ends for easy installation (standard) • Long-life molded coils • PTFE O-ring for superior external sealing Specifications • Maximum fluid temperature: • Maximum working pressure: • Minimum operating pressure drop: • MOPD: • UL/CUL file number: 250°F 680 psig 2 psi 550 psig MP604 Options • Available in 5 orifice sizes • Manual stem or mounting stud • Bi-Flow operation-conversion either factory assembled or with kit except 200RD 7,9 & 12 Oils & Chemicals 200R D 4 T 3 Valve Series Design Series Port Size (in 1/16”) Connection Type T = Copper Extended Ends Connection Size (In 1/8”) PCN Standard Valve 066158 066159 066160 066161 066162 066163 066164 066165 066166 066167 066168 066169 066170 066179 066180 – 066182 066183 066184 066185 066186 066187 066188 066189 066190 066191 – – – 066203 066204 066205 066206 006207 066208 066209 066210 066211 066212 Connection Size R-410A Description 1/4 ODF 3/8 ODF 1/4 ODF 3/8 ODF 1/2 ODF 3/8 ODF 1/2 ODF 5/8 ODF 3/8 ODF 1/2 ODF 5/8 ODF 1/2 ODF 5/8 ODF 3.2 (11.3) 3.2 (11.3) 4.5 (15.8) 4.5 (15.8) 4.5 (15.8) 7.3 (25.7) 7.3 (25.7) 7.3 (25.7) 7.7 (27.1) 7.7 (27.1) 7.7 (27.1) 8.8 (30.9) 8.8 (30.9) 200RD 2 T 2 200RD 2 T 3 200RD 3 T 2 200RD 3 T 3 200RD 3 T 4 200RD 4 T 3 200RD 4 T 4 200RD 4 T 5 200RD 5 T 3 200RD 5 T 4 200RD 5 T 5 200RD 6 T 4 200RD 6 T 5 1 Add “T” to the end of description for Mounting Stud Add “M” to the end of the description for Manual Stem Capacities based on ARI standard. *See Extended Capacity Tables for ratings at a wide range of conditions. Tools & Instruments Accessories, Supplies & Commodities 2 Refrigeration M M = manual stem T = mounting stud (optional) *NOTE: Valves are shipped without the solenoid coils (VLC = Valve Less Coil). See available coil assemblies. Ordering Information and Nominal * Liquid Capacity - Tons (kW) Thermostats Indoor Air Quality Heating Components o NOTE: Mounting enclosing tube more than 90 off vertical up position is not recommended. Nomenclature example: 200RD 4T3M VLC K-137 VLC Coil* Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 8 With Extended Ends Port Size Conn. Size & Style 1/4 ODF 1/8 3/8 ODF 1/4 ODF 3/16 3/8 ODF 1/2 ODF 1/4 5/16 3/8 5/8 ODF 3/8 ODF 1/2 ODF 5/8 ODF 3/8 ODF 1/2 ODF 5/8 ODF A B 2.42 4.62 2.50 3.25 2.31 2.50 3.25 2.31 2.50 3.25 5.00 6.50 4.62 5.00 6.50 4.62 5.00 6.50 C 0.25 0.31 0.25 0.31 0.38 0.50 0.31 0.38 0.50 0.31 0.38 0.50 Electrical Valve 200RD 2T2 200RD 2T3 200RD 3T2 200RD 3T3 200RD 3T4 200RD 4T4 200RD 4T5 200RD 5T3 200RD 5T4 200RD 5T5 200RD 6T3 200RD 6T4 200RD 6T5 Motors EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 200RD Compressors, Chillers, Condensers Refrigeration Coil Assembly See coil assemblies for availability. Bi-Flow Conversion Kit KS30387 (PCN 066224) K-138 Tools & Instruments Gasket Kit Gasket Kit KG10025 (PCN 049190) (contains 12 pieces - each of PTFE and neoprene O-rings) Refrigeration Valve Repair Kit “K” indicates part is supplied in valve repair kit KS30386. (PCN 066223) Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Exploded View & Parts Kit Data Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 9 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 240RA The 240RA is a 2-way, normally closed diaphragm valve. 240RA valves are used for liquid, suction, and hot gas service. Features Specifications • One coil fits all valve sizes • Maximum fluid temperature: 250°F • Can be brazed into the line without • Maximum working disassembly pressure: 500 psig • Reinforced PTFE diaphragm for high • MOPD: 300 psig temperature applications MP604 • Extended ends for easy installation (standard) • UL/CUL file number: • Long-life molded coils • Mounting stud models can be field converted to manual stem Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Options • Manual stem or mounting stud o NOTE: Mounting enclosing tube more than 90 off vertical up position is not recommended. Nomenclature example: 240RA 8T5M VLC 240R A** 8 T 5 Valve Series Design Series Port Size (in 1/16”) Connection Type T = copper entended ends Connection Size (in 1/8”) M M = manual stem T = mounting stud (optional) VLC Coil* * NOTE: Valves are shipped without the solenoid coils (VLC = Valve Less Coil). See coil assemblies for availability. **NOTE: Letter “H” is no longer used since all 240RA valves now contain the high temperature diaphragm for hot gas. Ordering Information and Nominal* Liquid Capacity Table – Tons (kW) Indoor Air Quality PCN 040846 044860 040848 043205 044861 040850 043959 042549 044428 047761 047747 054297 040845 045753 040847 043204 045752 040849 045549 042548 044788 046636 046637 046638 Connection Size 5/8 ODF 7/8 ODF 5/8 ODF 7/8 ODF 1 1/8 ODF 7/8 ODF 1 1/8 ODF 1 1/8 ODF 1 3/8 ODF 1 3/8 ODF 1 5/8 ODF 2 1/8 ODF R-12 R-134a R-22 R-407C R-404A/R-507 R-502 Description 12.2 (43.4) 12.2 (43.4) 18.2 (64.6) 24.0 (85.0) 24.0 (85.0) 27.6 (97.6) 27.6 (97.6) 37.3 (132.0) 37.3 (132.0) 58.8 (208.0) 58.8 (208.0) 58.8 (208.0) 14.8 (52.5) 14.8 (52.5) 22.0 (78.0) 28.9 (102.3) 28.9 (102.3) 33.2 (117.5) 33.2 (117.5) 55.1 (195.1) 55.1 (195.1) 86.8 (307.4) 86.8 (307.4) 86.8 (307.4) 15.6 (55.2) 15.6 (55.2) 23.3 (82.5) 30.5 (108.0) 30.5 (108.0) 34.9 (124.0) 34.9 (124.0) 58.0 (205.0) 58.0 (205.0) 95.4 (338.0) 95.4 (338.0) 95.4 (338.0) 14.8 (52.4) 14.8 (52.4) 22.1 (78.2) 29.0 (103.0) 29.0 (103.0) 33.2 (118.0) 33.2 (118.0) 55.2 (195.0) 55.2 (195.0) 90.8 (321.0) 90.8 (321.0) 90.8 (321.0) 10.3 (36.5) 10.3 (36.5) 15.3 (54.2) 21.0 (71.1) 21.0 (71.1) 23.0 (81.4) 23.0 (81.4) 38.3 (135.0) 38.3 (135.0) 65.7 (230.0) 65.7 (230.0) 65.7 (230.0) 10.1 (35.0) 10.1 (35.0) 15.1 (53.5) 19.8 (70.1) 19.8 (70.1) 22.7 (80.4) 22.7 (80.4) 37.3 (133.0) 37.3 (133.0) 62.0 (219.0) 62.0 (219.0) 62.0 (219.0) 240RA 8 T 5 240RA 8 T 7 240RA 9 T 5 240RA 9 T 7 240RA 9 T 9 240RA 12 T 7 240RA 12 T 9 240RA 16 T 9 240RA 16 T 11 240RA 20 T 11 240RA 20 T 13 240RA 20 T 17 1 Add “T” to the end of description for Mounting Stud Add “M” to the end of the description for Manual Stem Capacities based on 100°F liquid and 40°F saturated evaporator per ARI standard 760-87. *See Extended Capacity Tables for ratings at a wide range of conditions. 2 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Standard Valve 060374 060375 060376 060377 060378 060379 060380 060381 060382 060383 060384 060385 K-139 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 10 Valve Kits 060626 060627 060628 060629 060630 044657 044658 044658 044491 047723 240RA8 240RA9 240RA12 240RA16 240RA20 240RA8 240RA9 240RA12 240RA16 240RA20 KS30321 KS30322 KS30323 KS30324 KS30325 7/8 ODF 5/8 ODF 9/16 7/8 ODF 1-1/8 ODF 7/8 ODF 3/4 1-1/8 ODF 1-1/8 ODF 1 1-3/8 ODF 1-3/8 ODF 1-1/4 1-5/8 ODF 2-1/8 ODF 4.80 5.28 4.80 5.28 5.08 5.56 5.08 5.56 5.08 5.56 5.08 5.56 5.08 5.56 5.34 5.80 5.34 5.80 5.45 6.47 5.45 6.47 5.45 6.47 1.34 1.83 1.34 1.83 1.50 2.08 1.50 2.08 1.50 2.08 1.50 2.08 1.50 2.08 1.66 2.23 1.66 2.23 1.31 2.33 1.31 2.33 1.31 2.33 C D E 3.28 6.88 0.50 3.41 7.13 0.75 3.20 6.88 0.50 3.33 7.13 0.75 4.02 8.50 0.91 3.52 7.50 0.75 4.02 8.50 4.13 9.06 0.91 5.13 11.06 0.97 5.11 10.81 5.89 12.38 1.09 6.58 13.75 1.34 Manual Opener Kit Thermostats Complete Kit 1/2 B KS30066 KS30067 KS30067 KS30068 KS30098 Oils & Chemicals Valve 5/8 ODF A Tools & Instruments Accessories, Supplies & Commodities Gasket Kit for all 240RA valves is KG10028 (PCN 054356) K-140 Refrigeration PCN Conn. Size Motors 240RA8T5T 240RA8T5M 240RA8T7T 240RA8T7M 240RA9T5T 240RA9T5M 240RA9T7T 240RA9T7M 240RA9T9T 240RA9T9M 240RA12T7T 240RA12T7M 240RA12T9T 240RA12T9M 240RA16T9T 240RA16T9M 240RA16T11T 240RA16T11M 240RA20T11T 240RA20T11M 240RA20T13T 240RA20T13M 240RA20T17T 240RA20T17M Port Size Electrical Valve Heating Components Dimensional Data (in) Indoor Air Quality EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 240RA Compressors, Chillers, Condensers Refrigeration Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 11 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 240RA Exploded View & Parts Kit Data Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Valve Repair Kit “K” indicates part is supplied in complete valve repair kit. Manual Stem Kit “M” indicates part is supplied in manual stem kit. Gasket Kit “G” indicates gasket is supplied in gasket kit. Note: Spanner wrench (X11981-1 service tool) included in complete valve kit. Coil Assembly See coil assemblies for availability. K-141 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 12 Refrigeration Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 500RB Motors The 500RB is a pilot-operated, 2-way, normally open valve. 500RB valves are used for liquid, suction or discharge gas refrigerant service. Features Specifications • One coil fits all valve sizes • Maximum fluid temperature: 250°F • Extended ends for easy installation • Maximum working pressure: 500 psig • Can be positioned in remote locations • MOPD: 275 psig MP604 • Long-life molded coils • UL/CUL file number: • Low pressure differential required for full opening • PTFE O-ring for superior external sealing Options • Connection types: SAE, ODF, NPTF and ODF inlet with ODM outlet o NOTE: Mounting enclosing tube more than 90 off vertical u position is not recommended. * NOTE: Valves are shipped without the solenoid coils (VLC = Valve Less Coil). See coil assemblies for availability. Ordering Information and Nominal* Liquid Capacity Table – Tons (kW) PCN Connection Size R-12 R-134a R-22 R-407C R-404A/R-507 063274 1/4 SAE 2.4 (8.7) 2.9 (10.4) 3.1 (11.0) 2.9 (10.3) 2.1 (7.4) 063276 3/8 SAE 2.4 (8.7) 2.9 (10.4) 3.1 (11.0) 2.9 (10.3) 2.1 (7.4) 063278 1/4 ODF 2.4 (8.7) 2.9 (10.4) 3.1 (11.0) 2.9 (10.3) 2.1 (7.4) 063280 3/8 ODF 2.4 (8.7) 2.9 (10.4) 3.1 (11.0) 2.9 (10.3) 2.1 (7.4) 063282 1/4 SAE 3.7 (13.0) 4.4 (15.6) 4.8 (17.0) 4.5 (16.0) 3.2 (11.3) 063284 3/8 SAE 3.7 (13.0) 4.4 (15.6) 4.8 (17.0) 4.5 (16.0) 3.2 (11.3) 063286 1/2 SAE 3.7 (13.0) 4.4 (15.6) 4.8 (17.0) 4.5 (16.0) 3.2 (11.3) 063288 1/4 ODF 3.7 (13.0) 4.4 (15.6) 4.8 (17.0) 4.5 (16.0) 3.2 (11.3) 063290 3/8 ODF 3.7 (13.0) 4.4 (15.6) 4.8 (17.0) 4.5 (16.0) 3.2 (11.3) 063292 1/2 ODF 3.7 (13.0) 4.4 (15.6) 4.8 (17.0) 4.5 (16.0) 3.2 (11.3) 063294 3/8 SAE 4.4 (15.6) 5.3 (18.6) 5.6 (19.8) 5.3 (18.8) 3.7 (13.1) 063296 1/4 NPTF 4.4 (15.6) 5.3 (18.6) 5.6 (19.8) 5.3 (18.8) 3.7 (13.1) 063298 3/8 NPTF 4.4 (15.6) 5.3 (18.6) 5.6 (19.8) 5.3 (18.8) 3.7 (13.1) 063300 3/8 ODF x 1/2 ODM 4.4 (15.6) 5.3 (18.6) 5.6 (19.8) 5.3 (18.8) 3.7 (13.1) 063302 1/2 ODF x 5/8 ODM 4.4 (15.6) 5.3 (18.6) 5.6 (19.8) 5.3 (18.8) 3.7 (13.1) 063304 1/4 ODF 4.4 (15.6) 5.3 (18.6) 5.6 (19.8) 5.3 (18.8) 3.7 (13.1) 063306 3/8 ODF 4.4 (15.6) 5.3 (18.6) 5.6 (19.8) 5.3 (18.8) 3.7 (13.1) 063308 1/2 ODF 4.4 (15.6) 5.3 (18.6) 5.6 (19.8) 5.3 (18.8) 3.7 (13.1) 063310 5/8 ODF 4.4 (15.6) 5.3 (18.6) 5.6 (19.8) 5.3 (18.8) 3.7 (13.1) 063312 1/2 SAE 6.5 (23.0) 7.8 (27.7) 8.2 (29.0) 7.8 (27.6) 5.4 (19.1) 063314 5/8 SAE 6.5 (23.0) 7.8 (27.7) 8.2 (29.0) 7.8 (27.6) 5.4 (19.1) 063316 3/8 NPTF 6.5 (23.0) 7.8 (27.7) 8.2 (29.0) 7.8 (27.6) 5.4 (19.1) 063318 1/2 ODF x 5/8 ODM 6.5 (23.0) 7.8 (27.7) 8.2 (29.0) 7.8 (27.6) 5.4 (19.1) 063320 5/8 ODF 6.5 (23.0) 7.8 (27.7) 8.2 (29.0) 7.8 (27.6) 5.4 (19.1) 063322 3/8 ODF 6.5 (23.0) 7.8 (27.7) 8.2 (29.0) 7.8 (27.6) 5.4 (19.1) 063323 1/2 ODF 6.5 (23.0) 7.8 (27.7) 8.2 (29.0) 7.8 (27.6) 5.4 (19.1) 063325 5/8 ODF 6.5 (23.0) 7.8 (27.7) 8.2 (29.0) 7.8 (27.6) 5.4 (19.1) 063327 1/2 SAE 7.8 (27.7) 9.4 (33.4) 10.0 (35.4) 9.5 (33.6) 6.5 (23.0) 063329 5/8 SAE 7.8 (27.7) 9.4 (33.4) 10.0 (35.4) 9.5 (33.6) 6.5 (23.0) 063331 3/8 NPTF 7.8 (27.7) 9.4 (33.4) 10.0 (35.4) 9.5 (33.6) 6.5 (23.0) 063333 1/2 ODF x 5/8 ODM 7.8 (27.7) 9.4 (33.4) 10.0 (35.4) 9.5 (33.6) 6.5 (23.0) 063335 5/8 ODF 7.8 (27.7) 9.4 (33.4) 10.0 (35.4) 9.5 (33.6) 6.5 (23.0) 063337 3/8 ODF 7.8 (27.7) 9.4 (33.4) 10.0 (35.4) 9.5 (33.6) 6.5 (23.0) 063339 1/2 ODF 7.8 (27.7) 9.4 (33.4) 10.0 (35.4) 9.5 (33.6) 6.5 (23.0) 063341 5/8 ODF 7.8 (27.7) 9.4 (33.4) 10.0 (35.4) 9.5 (33.6) 6.5 (23.0) 064038 5/8 ODF x 7/8 ODM 12.2 (43.4) 14.8 (52.5) 15.6 (55.2) 14.8 (52.4) 10.3 (36.5) 064064 1/2 ODF 12.2 (43.4) 14.8 (52.5) 15.6 (55.2) 14.8 (52.4) 10.3 (36.5) 064065 5/8 ODF 12.2 (43.4) 14.8 (52.5) 15.6 (55.2) 14.8 (52.4) 10.3 (36.5) Capacities based on 100°F liquid and 40°F saturated evaporator per ARI standard 760-87. *See Extended Capacity Tables for ratings at a wide range of conditions. K-142 R-502 Description 2.0 (7.1) 2.0 (7.1) 2.0 (7.1) 2.0 (7.1) 3.1 (11.0) 3.1 (11.0) 3.1 (11.0) 3.1 (11.0) 3.1 (11.0) 3.1 (11.0) 3.6 (12.7) 3.6 (12.7) 3.6 (12.7) 3.6 (12.7) 3.6 (12.7) 3.6 (12.7) 3.6 (12.7) 3.6 (12.7) 3.6 (12.7) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 5.3 (18.8) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 6.5 (23.0) 10.1 (35.8) 10.1 (35.8) 10.1 (35.8) 500RB 2 F 2 500RB 2 F 3 500RB 2 T 2 500RB 2 T 3 500RB 3 F 2 500RB 3 F 3 500RB 3 F 4 500RB 3 T 2 500RB 3 T 3 500RB 3 T 4 500RB 4 F 3 500RB 4 P 2 500RB 4 P 3 500RB 4 S 3 500RB 4 S 4 500RB 4 T 2 500RB 4 T 3 500RB 4 T 4 500RB 4 T 5 500RB 5 F 4 500RB 5 F 5 500RB 5 P 3 500RB 5 S 4 500RB 5 S 5 500RB 5 T 3 500RB 5 T 4 500RB 5 T 5 500RB 6 F 4 500RB 6 F 5 500RB 6 P 3 500RB 6 S 4 500RB 6 S 5 500RB 6 T 3 500RB 6 T 4 500RB 6 T 5 500RB 7 S 5 500RB 7 T 4 500RB 7 T 5 Heating Components VLC Coil* Indoor Air Quality 3 Connection Size (in 1/8”) Thermostats T Connection Type F = SAE T = ODF (copper entended fittings) P = NPTF S = ODF inlet/ODM outlet Oils & Chemicals 4 Port Size (in 1/16”) Accessories, Supplies & Commodities B Design Series Tools & Instruments 500R Valve Series Refrigeration Nomenclature example: 500RB 4T3 VLC Electrical NOTE: This valve requires a DM, MM or ASC2-Type coil assembly. ASC2-Type Coil requires cable assembly (PCN:059261). Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 13 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 500RB Dimensional Data (in) Without Extended Ends Valve 500RB 4P2 500RB 4P3 500RB 4S3 500RB 4S4 500RB 4F3 500RB 5P3 500RB 5S4 500RB 5S5 500RB 5F4 500RB 5F5 500RB 6P3 500RB 6S4 500RB 6S5 500RB 6F4 500RB 6F5 500RB 7S5 Valve 500RB 2T2 500RB 2T3 500RB 3T2 500RB 3T3 500RB 3T4 500RB 4T4 500RB 4T5 500RB 5T3 500RB 5T4 500RB 5T5 500RB 6T3 500RB 6T4 500RB 6T5 500RB 7T5 Thermostats Oils & Chemicals Accessories, Supplies & Commodities Valve Kits Valve Complete Kit PCN 500RB 2-6 500RB 7 KS-30353 KS-30355 064268 064264 Tools & Instruments Refrigeration Port Size 1/4 5/16 3/8 7/16 Conn. Size & Style 1/4 NPTF 3/8 NPTF 3/8 ODF X 1/2 ODM 1/2 ODF X 5/8 ODM 3/8 SAE (male flare) 3/8 NPTF 1/2 ODF X 5/8 ODM 5/8 ODF 1/2 SAE (male flare) 5/8 SAE (male flare) 3/8 NPTF 1/2 ODF X 5/8 ODM 5/8 ODF 1/2 SAE (male flare) 5/8 SAE (male flare) 5/8 ODF X 7/8 ODM A 0.50 0.56 0.56 0.56 0.63 With Extended Ends Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-143 Port Size 1/8 3/16 1/4 5/16 3/8 7/16 Conn. Size & Style 1/4 ODF 3/8 ODF 1/4 ODF 3/8 ODF 1/2 ODF 1/2 ODF 5/8 ODF 3/8 ODF 1/2 ODF 5/8 ODF 3/8 ODF 1/2 ODF 5/8 ODF 5/8 ODF X 5/8 ODF A B 2.42 4.67 2.50 3.25 2.31 2.50 3.25 2.31 2.50 3.25 - 5.00 6.50 4.63 5.00 6.50 4.63 5.00 6.50 6.88 B 2.37 2.37 2.37 2.37 3.12 2.37 2.37 2.37 3.50 3.75 2.37 2.37 2.37 3.50 3.75 2.98 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 14 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 500RB Thermostats Indoor Air Quality Heating Components Electrical Motors Exploded View & Parts Kit Data Compressors, Chillers, Condensers Refrigeration Coil Assembly Accessories, Supplies & Commodities DM, MM or ASC-Type style only Oils & Chemicals Gasket Kit Gasket Kit KG10025 - PCN 049190 (contains 12 pieces - each of PTFE and Neoprene O-rings). K-144 Refrigeration Tools & Instruments Use MagMax style coil for operation on DC voltage. No other DC coil may be used. Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 15 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 540RA The 540RA is a 2-way, normally open diaphragm valve. 540RA valves are used for liquid, suction and hot gas service. Features • Can be brazed into the line without disassembly • PTFE diaphragm • Extended ends for easy installation • Long-life molded coils • Low pressure differential required for full opening Specifications 250°F • Maximum fluid temperature: 500 psig • Maximum working pressure: 250 psig • MOPD: MP604 • UL/CUL file number: o NOTE: Mounting enclosing tube more than 90 off vertical up position is not recommended. NOTE: This valve requires a DM, MM or ASC2-Type coil assembly. ASC2-Type Coil requires snap cap and cable assembly (PCN:059261). Nomenclature example: 540RA 8T5 VLC A 8 T 5 VLC Design Series Port Size (in 1/16”) Connection Type T = copper entended ends Connection Size (in 1/8”) Coil* PCN Standard Valve Thermostats 060391 060392 060393 060394 060395 060396 060397 060398 060399 060400 060401 060402 060403 058573 046265 046989 046266 046268 047497 046269 047498 046270 047214 047953 047954 047955 Connection Size 1/2 ODF 5/8 ODF 7/8 ODF 5/8 ODF 7/8 ODF 1 1/8 ODF 7/8 ODF 1 1/8 ODF 1 1/8 ODF 1 3/8 ODF 1 3/8 ODF 1 5/8 ODF 2 1/8 ODF R-12 R-134a R-22 R-407C R-404A/R-507 R-502 Description 12.2 (43.4) 12.2 (43.4) 12.2 (43.4) 18.2 (64.6) 24.0 (85.0) 24.0 (85.0) 27.6 (97.6) 27.6 (97.6) 37.3 (132.0) 37.3 (132.0) 58.8 (208.0) 58.8 (208.0) 58.8 (208.0) 14.8 (52.5) 14.8 (52.5) 14.8 (52.5) 22.0 (78.0) 28.9 (102.3) 28.9 (102.3) 33.2 (117.5) 33.2 (117.5) 55.1 (195.1) 55.1 (195.1) 86.8 (307.4) 86.8 (307.4) 86.8 (307.4) 15.6 (55.2) 15.6 (55.2) 15.6 (55.2) 23.3 (82.5) 30.5 (108.0) 30.5 (108.0) 34.9 (123.0) 34.9 (123.0) 58.0 (205.0) 58.0 (205.0) 95.4 (338.0) 95.4 (338.0) 95.4 (338.0) 14.8 (52.4) 14.8 (52.4) 14.8 (52.4) 22.1 (78.2) 29.0 (103.0) 29.0 (103.0) 33.2 (118.0) 33.2 (118.0) 55.2 (195.0) 55.2 (195.0) 90.8 (321.0) 90.8 (321.0) 90.8 (321.0) 10.3 (36.5) 10.3 (36.5) 10.3 (36.5) 15.3 (54.2) 20.1 (71.1) 20.1 (71.1) 23.0 (81.0) 23.0 (81.0) 38.3 (136.0) 38.3 (136.0) 65.7 (233.0) 65.7 (233.0) 65.7 (233.0) 10.1 (35.6) 10.1 (35.6) 10.1 (35.6) 15.1 (53.4) 19.8 (70.1) 19.8 (70.1) 22.7 (80.0) 22.7 (80.0) 37.7 (133.0) 37.7 (133.0) 62.0 (219.0) 62.0 (219.0) 62.0 (219.0) 540RA 8 T 4 540RA 8 T 5 540RA 8 T 7 540RA 9 T 5 540RA 9 T 7 540RA 9 T 9 540RA 12 T 7 540RA 12 T 9 540RA 16 T 9 540RA 16 T 11 540RA 20 T 11 540RA 20 T 13 540RA 20 T 17 1 Add “T” to the end of description for Mounting Stud Capacities based on 100°F liquid and 40°F saturated evaporator per ARI standard 760-87. *See Extended Capacity Tables for ratings at a wide range of conditions. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals 540R Valve Series * NOTE: Valves are shipped without the solenoid coils (VLC = Valve Less Coil). See coil assemblies for availability. Ordering Information and Nominal* Liquid Capacity Table – Tons (kW) Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-145 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 16 Dimensional Data (in) Valve Port Size 1/2 9/16 3/4 1 1-1/4 Conn. Size 5/8 ODF 7/8 ODF 5/8 ODF 7/8 ODF 1 1/8 ODF 7/8 ODF 1 1/8 ODF 1 1/8 ODF 1 3/8 ODF 1 3/8 ODF 1 5/8 ODF 2 1/8 ODF A B 4.80 1.34 5.08 1.50 5.34 1.66 5.45 1.31 C D 3.28 3.41 3.20 3.33 4.02 3.52 4.02 4.25 5.25 5.11 5.89 6.58 6.88 7.13 6.88 7.13 8.50 7.50 8.50 9.06 11.06 10.81 12.38 13.75 Electrical 540RA8T5-T 540RA8T7-T 540RA9T5-T 540RA9T7-T 540RA9T9-T 540RA12T7-T 540RA12T9-T 540RA16T9-T 540RA16T11-T 540RA20T11-T 540RA20T13-T 540RA20T17-T Motors EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 540RA Compressors, Chillers, Condensers Refrigeration Kit # PCN KS30328 KS30329 KS30330 KS30331 KS30332 060633 060634 060635 060636 060637 K-146 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Gasket Kit for all 540RA valves is KG10028 (PCN 054356) Indoor Air Quality Valve 540RA8 540RA9 540RA12 540RA16 540RA20 Heating Components 540RA Valve Kits Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 17 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 540RA Exploded View & Parts Kit Data Valve Repair Kit “K” indicates part is supplied in complete valve repair kit. Gasket Kit “G” indicates gasket is supplied in gasket kit. Note: Spanner wrench (X11981-1 service tool) used to remove and replace enclosing tube collar, is included in complete valve kit. Coil Assembly See coil assemblies for availability. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-147 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 18 Refrigeration A Design Series 16 Port Size (in 1/16”) T Connection Type T = copper entended ends 11 Connection Size (in 1/8”) VLC Coil* * NOTE: Valves are shipped without the solenoid coils (VLC = Valve Less Coil). See coil assemblies for availability. Ordering Information and Nominal* Liquid Capacity Table - Tons (kW) PCN Connection Size 053215 052825 052915 048411 1 1/8 ODF 1 1/8 ODF 1 3/8 ODF 1 3/8 x 1 5/8 ODF 1 5/8 ODF 2 1/8 ODF 1 3/8 ODF 1 5/8 x 1 5/8ODF 049901 054153 053099 053220 R-12 R-134a R-407C R-404A/R-507 R-502 Description 25.3 (89.6) 3.4 (107.6) 32.9 (116) 34.9 (123.5) 42.0 (148.7) 45.4 (161.0) 34.9 (123.5) 42.0 (148.7) 45.4 (161.0) 34.9 (123.5) 42.0 (148.7) 45.4 (161.0) 31.3 (111.0) 43.2 (153.0) 43.2 (153.0) 43.2 (153.0) 21.9 (77.5) 30.3 (107.0) 30.3 (107.0) 30.3 (107.0) 21.4 (75.8) 29.5 (104.0) 29.5 (104.0) 29.5 (104.0) 710RA 12 T 9 VLC 710RA 16 T 9 VLC 710RA 16 T 11 VLC 710RA 16 T 11-13 VLC 53.1 (188.0) 76.4 (270.5) 34.9 (123.5) 53.1 (188.0) 66.3 (235.0) 95.2 (230.0) 43.2 (153.0) 66.3 (235.0) 46.5 (165.0) 66.7 (236.0) 30.3 (107.0) 46.5 (165.0) 45.2 (160.0) 65.0 (230.0) 29.5 (104.0) 45.2 (160.0) 710RA 20 T 13 VLC 710RA 24 T 17 VLC 713RA 16 T 11 VLC 713RA 20 T 13 VLC 64.0 (226.6) 92.0 (325.7) 42.0 (148.7) 64.0 (226.6) R-22 69.6 (246.0) 100.0 (354.0) 45.4 (161.0) 69.6 (246.0) Tools & Instruments Accessories, Supplies & Commodities Capacities based on 100°F liquid and 40°F saturated evaporator per ARI standard 760-87. *See Extended Capacity Tables for ratings at a wide range of conditions. Indoor Air Quality 710R Valve Series Electrical Features Specifications • Differential adjustable from 8-40 psi • Maximum fluid temperature: 250°F • Angle style construction eliminates the need • Maximum working pressure: 500 psig for an elbow fitting at the liquid header • MOPD (710): 300 psig • Long-life molded coils MOPD (713): 250 psig MP604 • These valves eliminate the need for an • UL/CUL file number: external check valve and the associated piping needed on supermarket racks with gas defrost • Can be brazed into the line without disassembly o NOTE: Mounting enclosing tube more than 90 off vertical up position is not recommended. NOTE: All valves require AM coil except 710RA24 valves which require either an AMCN/AMGN or ASC2 coil. Nomenclature example: 710RA 16T11 VLC Thermostats 713 Operation Differential Mode Full Open Full Open Differential Mode Oils & Chemicals 710 Solenoid De-Energized Energized De-Energized Energized K-148 Refrigeration Model Heating Components The 710/713RA are 2-way, diaphragm valves. The 710RA is a normally closed valve. The 713RA is a normally open valve. These valves are used for liquid pressure differential control for gas defrost. Motors Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 710/713RA Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 19 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 710/713RA Dimensional Data (in) Valve Conn. Size 710/713RA12T9 710/713RA12T11 710/713RA16T9 710/713RA16T11 710/713RA16T11-13 710/713RA20T11 710RA20T13 710RA24T17 1-1/8 ODF (1.13) 1-3/8 ODF (1.38) 1-1/8 ODF (1.13) 1-3/8 ODF (1.38) 1-3/8 x 1-5/8 ODF (1.38 x 1.63) 1-3/8 ODF (1.38) 1-5/8 ODF (1.63) 2-1/8 ODF (2.13) A 3.92 4.56 4.62 4.59 B C 4.01 5.29 4.23 3.56 4.84 3.39 4.39 4.38 4.26 4.76 5.73 5.23 5.09 5.59 6.56 D E 3.48 2.28 3.73 3.38 4.14 5.46 Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Valve Kits Valve Kit # PCN 710RA12 710RA16 710RA20 710RA24 KS30154 KS30155 KS30156 KS30279 053564 053565 053566 054994 Gasket Kit for all 540RA valves is KG10028 (PCN 054356) Typical Application Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Liquid Pressure Differential Control for Hot Gas Defrost K-149 4.06 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 20 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 710/713RA Valve Repair Kit “K” indicates part is supplied in valve repair kit. Gasket Kit “G” indicates part is supplied in gasket kit KG10028 [PCN-054356]. Note: Spanner wrench (X11981-1 [PCN-027451] service tool) included in complete valve kit. K-150 Refrigeration Tools & Instruments Coil Assembly See coil assemblies for availability. Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Exploded View & Parts Kit Data Compressors, Chillers, Condensers Refrigeration Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 21 EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 702RA The 702RA is a direct-acting, 3-way, normally open valve. 702RA valves are compatible with all CFC HCFC and HFC refrigerants. These valves are used in conjunction with externally equalized expansion valves to provide positive shut-off. Features • 3-way pilot • High capacity, less pressure drop, higher system efficiency • Rugged internal construction with bar stock brass body • Long-life molded coils • Rulon seat disc • Space-saving coil design • Operates in any position Specifications • Maximum fluid temperature: • Maximum working pressure: • MOPD: 250° F 500 psig 300 psi NOTE: 702RA valves require coil type AMGN or ASC2. Nomenclature example: 702RA 01 VLC 702R A 01 VLC` Valve Series Design Series Port Size (in 1/16”) Coil* * NOTE: Valves are shipped without the solenoid coils (VLC = Valve Less Coil). See coil assemblies for availability Dimensional Data (in) Ordering Information PCN Valve Connection Size Port Size Service Coil Type 029781 702RA01 1/4 SAE MALE FLARE 1/16 Common Refrigerants AMGN or ASC2 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-151 Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Flow Directional Diagrams K-152 Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils 702RA Refrigeration Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 22 Refrigeration Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 23 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Coils for Solenoid Valves Features • Compact designs • Coil windings are insulated to provide shock and vibration protection • ASC2 is designed to provide weather protection • Interchangeable housings Voltage Options • 24V 50/60 Hz • 120V 50/60 Hz (standard) • 208-220/208-240V 50/60 Hz • 480V 50/60 Hz • 120-240V 50/60 Hz • 12V D.C. (MM Series recommended) • 24V D.C. (MM Series recommended) Nomenclature MAGMAX Coil (Type MM): For Use On DC Applications Only Coil Code M A Series A = 12 Watt B = 15 Watt C = 18 Watt D = 7 Watt M = 4 Watt Insulation B or G = Class B M = Class F H = Class H Voltage G Enclosure C = Conduit Connection E = Explosion Proof F = Open Frame Leads G = Junction Box L = Grommet 18” Leads S = Spade Connection 12VDC 24VDC Amperes Holding 0.4 0.4 Watts Holding 4 4 Solenoid Coil Prefix Selection Table 1) Select Prefix 2) Select Voltage 3) Select PCN Valve Type 50RB 100RB 200RB 222CB (Steam) 401 500RB 540RA 222CB (Water) Special DC Application J-Box Conduit Leads Spades Molded-DIN With Connector AMG AMG AHG AMG DMG AMG MMG AMC AMC AHC AMC AMC - SML* AMF AMF AMF DMF AMF MMF AMS AMS AMS DMS DMS AMS - ASC2 ASC2 ASC2 ASC2 ASC2 - * SML is OEM - RMF is W holesale replacement Note - All coils NEMAI except ASC2 NEMA2 AM/EM Coil:240CD, 214CA, 211CA, 222CB, 210CA Nominal Voltage and Frequency 121 201 211 Applied Voltage and Frequency Inrush Holding Inrush Holding Inrush 231 Holding Inrush 241 Holding Inrush Holding 24/60 24/60 1.23 0.61 1.17 0.61 0.92 0.61 1.00 0.74 0.92 0.61 120/60 120/60 0.23 0.14 0.22 0.14 0.17 0.14 0.19 0.16 0.17 0.14 240/60 240/60 0.13 0.08 0.12 0.08 0.10 0.08 0.11 0.08 0.10 0.08 480/60 480/60 0.06 0.04 0.05 0.04 0.05 0.04 0.05 0.04 0.05 0.04 See the M M (MAGMAX) Series Coil for DC Applications K-153 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 24 AM Coil:702RA Nominal Voltage and Frequency 24-50/60 24-50/60 120-50/60 120-50/60 208-220/50 208-240/60 208-220/50 208-240/60 208-220/50 208-240/60 208-220/50 208-240/60 480-50/60 480-50/60 Applied Voltage and Frequency 24/50 24/60 120/50 120/60 208/50 208/60 220/50 240/60 480/50 480/60 Amperes Inrush 1.70 1.41 0.38 0.32 0.17 0.15 0.20 0.22 0.10 0.09 Holding 1.00 0.64 0.24 0.16 0.10 0.06 0.14 0.09 0.07 0.04 VA Holding 24 15 29 19 21 13 33 22 33 22 Watts Max. Coil Insulation 17/12 Class F Molded Motors EMERSON CLIMATE TECHNOLOGIES-Coils for Solenoid Valves Compressors, Chillers, Condensers Refrigeration Applied Voltage and Frequency 24/50 24/60 120/50 120/60 208/50 208/60 220/50 240/60 480/50 480/60 Amperes Inrush 1.20 1.0 .25 .19 .14 .12 .16 .13 .06 .05 Holding .96 .74 .21 .16 .08 .06 .10 .08 .05 .04 VA Holding 23 18 25 19 17 12 24 19 24 19 Watts Max. Coil Insulation 17/12 Class F Molded VA Holding Watts Max. Coil Insulation 23 18 25 19 17 12 24 19 24 19 17/12 Class F Molded Indoor Air Quality Nominal Voltage and Frequency 24-50/60 24-50/60 120-50/60 120-50/60 208-220/50 208-240/60 208-220/50 208-240/60 208-220/50 208-240/60 208-220/50 208-240/60 480-50/60 480-50/60 Heating Components AM Coil:100RB, 240RA, 710/713RA, EPRB(S) Electrical See the MM (MAGMAX) Series Coil for DC Applications See the MM (MAGMAX) Series Coil for DC Applications 24/50 24/60 120/50 120/60 208/50 208/60 220/50 240/60 480/50 480/60 Holding .96 .74 .21 .16 .08 .06 .10 .08 .05 .04 Tools & Instruments See the MM (MAGMAX) Series Coil for DC Applications Oils & Chemicals 24-50/60 24-50/60 120-50/60 120-50/60 208-220/50 208-240/60 208-220/50 208-240/60 208-220/50 208-240/60 208-220/50 208-240/60 480-50/60 480-50/60 Amperes Inrush 2.00 1.6 .45 .36 .19 .15 .24 .19 .11 .09 Accessories, Supplies & Commodities Applied Voltage and Frequency K-154 Refrigeration Nominal Voltage and Frequency Thermostats AM Coil:200RB Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 25 Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Coils for Solenoid Valves ASC2 Coil:200RB, 540RA Nominal Voltage and Frequency 24-50/60 24-50/60 120-50/60 120-50/60 240-50/60 240-50/60 Applied Voltage and Frequency 24/50 24/60 120/50 120/60 240/50 240/60 Inrush 2.18 1.90 .43 .38 .24 .21 Applied Voltage and Frequency 24/50 24/60 120/50 120/60 240/50 240/60 Inrush 1.80 1.56 .36 .31 .19 .17 Holding 1.07 .81 .21 .16 .12 .09 VA Holding 26 19 25 19 30 22 Watts Max. Coil Insulation 12 Class F Molded Holding .71 .52 .14 .10 .08 .06 VA Holding 17 12 17 12 19 14 Watts Max. Coil Insulation 10 Class F Molded Holding 1.10 .83 .22 .16 .13 .10 VA Holding 26 20 26 20 31 23 Watts Max. Coil Insulation 12 Class F Molded VA Holding Watts Max. Coil Insulation 17 13 17 12 20 14 10 Class F Molded Amperes DM Coil:500RB Nominal Voltage and Frequency 24-50/60 24-50/60 120-50/60 120-50/60 240-50/60 240-50/60 Amperes ASC2 Coil:100RB, 240RA, 710/713RA, EPRB(S) Nominal Voltage and Frequency 24-50/60 24-50/60 120-50/60 120-50/60 240-50/60 240-50/60 Applied Voltage and Frequency 24/50 24/60 120/50 120/60 240/50 240/60 Amperes Inrush 1.67 1.41 .31 .26 .17 .15 Nominal Voltage and Frequency Applied Voltage and Frequency 24-50/60 24-50/60 120-50/60 120-50/60 240-50/60 240-50/60 24/50 24/60 120/50 120/60 240/50 240/60 Amperes Inrush 1.21 1.02 .24 .20 .13 .11 Holding .72 .52 .14 .10 .08 .06 RMS/RMF Coil:50RB Nominal Voltage and Frequency Applied Voltage and Frequency 24-50/60 24-50/60 120-50/60 120-50/60 208-50/60 220-50/60 240-50/60 240-50/60 24/50 24/60 120/50 120/60 208/60 220/50 240/50 240/60 Amperes Inrush .87 .90 .19 .17 .08 .10 .11 .10 Holding .50 .40 .19 .09 .03 .05 .06 .04 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats DM Coil:100RB, 240RA, 710/713RA, EPRB(S) K-155 VA Holding Watts Max. Coil Insulation 12 10 22 10 7 11 14 11 7 Class F Molded Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 26 Voltage/Frequency Description 24V 50/60 Hz 24V 50/60 Hz 24V 50/60 Hz 120V 50/60 Hz 120V 50/60 Hz 120V 50/60 Hz 208-220/208-240V 50/60 Hz 208-220/208-240V 50/60 Hz 208-220/208-240V 50/60 Hz 480V 50/60 Hz 120-240V 50/60 Hz 277V 60 Hz 12V DC 24V DC AHG 24V 50/60 Hz AMG 24V 50/60 Hz DMG 24V 50/60 Hz AHG 120V 50/60 Hz AMG 120V 50/60 Hz DMG 120V 50-60 Hz AHG 208-220/208-240 50/60 Hz AMG 208-220/208-240 50/60 Hz DMG 208-220/208-240 50/60 Hz AMG 480V 50/60 Hz AMG 120-240V 50/60 Hz AMG 277V 60 Hz AMG 12V DC AMG 24V DC AMC - 1/2” Conduit 18” Leads PCN Voltage/Frequency Description 057631 057736 057598 057743 057741 057594 057730 057596 057633 24V 50/60 Hz 24V 50/60 Hz 120V 50/60 Hz 120V 50/60 Hz 208-220/208-240V 50/60 Hz 208-220/208-240V 50/60 Hz 120-240V 50/60 Hz 12V DC 24V DC AMC 24V 50/60 Hz AHC 24V 50/60 Hz AMC 120V 50/60 Hz AHC 120V 50/60 Hz AHC 208-220/208-240 50/60 Hz AMC 208-220/208-240 50/60 Hz AMC 120-240V 50/60 Hz AMC 12V DC AMC 24V DC PCN Voltage/Frequency Description 057539 057538 065677 057603 065680 065678 057349 065204 057540 065679 057531 065681 062013 057534 062410 057533 057714 24V 50/60 Hz 24V 50/60 Hz 24V 50/60 Hz 24V 50/60 Hz 24V 50/60 Hz 120V 50/60 Hz 120V 50/60 Hz 120V 50/60 Hz 208-220/208-240V 50/60 Hz 208-220/208-240V 50/60 Hz 208-220/208-240V 50/60 Hz 208-220/208-240V 50/60 Hz 208-220/208-240V 50/60 Hz 480V 50/60 Hz 120-240V 50/60 Hz 277V 60 Hz 277V 60 Hz AMF 24V 50/60 Hz AMF 24V 50/60 Hz RMF 24V 50/60 Hz AMS 24V 50/60 Hz RMS 24V 50/60 Hz RMF 120V 50/60 Hz AMS 120V 50/60 Hz RMS 120V 50/60 Hz AMF 208-220/208-240 50/60 Hz RMF 208-220/208-240 50/60 Hz AMS 208-220/208-240 50/60 Hz RMS 208-220/208-240 50/60 Hz DMS 208-220/208-240 50/60 Hz AMF 480V 50/60 Hz AMF 120-240V 50/60 Hz AMF 277V 50/60 Hz AMS 277V 50/60 Hz PCN Voltage/Frequency Description 062792 063542 062462 015384 062463 015383 064375 24V 50/60 Hz 24V 50/60 Hz 120V 50/60 Hz 120V 50/60 Hz 208-220/208-240 50-60 Hz 208-220/208-240 50-60 Hz 24V ASC2 24/50-60 ASC2L 24/50-60 ASC2 120/50-60 ASC2 GS-2562-1 ASC2 208-240/50-60 ASC2 GS-2562-2 ASC2 24V DC Motors PCN 057669 057341 055129 057673 057331 054762 057671 057342 054764 057527 057343 057528 057521 057523 Electrical 6” Leads Heating Components AMG - Junction Box Indoor Air Quality EMERSON CLIMATE TECHNOLOGIES-Coils for Solenoid Valves Ordering Information Compressors, Chillers, Condensers Refrigeration K-156 Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments ASC2 - DIN Refrigeration 18” Leads or 1.4” Spades Thermostats AMS - Open Frame Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 27 EMERSON CLIMATE TECHNOLOGIES-Coils for Solenoid Valves MMG - Special DC PCN Voltage/Frequency Description 063524 062972 063526 12V 12V 24V MMG 12V DC MMF 12V DC MMG 24V DC AM and ASC 2 style DC coils should not be used for direct replacements on OEM equipment. The use of this coil on new applications may result in the valve not opening. New applications should use the MM coil because of the signifi cant increase in opening power of the MM Coil over the standard AM and ASC 2 style DC coil. Options Junction Box Conduit - 18” Leads Open Frame - 18” Leads Open Frame - Spades Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality A 120 240 Tools & Instruments Refrigeration Coil Enclosure Options Code G C F S Dual Voltage Wiring Diagram Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-157 B 240 480 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 28 EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves In addition to air, water and steam, the following is a listing of secondary loop fluids that are compatible with our valves: Manufacturer Spauschus Associates (Distributor) Siltherm XLT DOW 3M Dowfrost Dow Pekasol Unknown Dynalene Dynalene Nomenclature example: 222CB 1/2 B 1/2 B B 1/2 B 1/2 B Body Elastomer Orifice Code 3/65” thru B = Buna-N 2” Thermostats Indoor Air Quality Body Material B = Brass S = Stainless Steel T = Stainless Steel with Silver Shading Band Oils & Chemicals Product Group Two digits to Define Group C Form of Flow Design Series Pipe N.P.T. C = Normally Closed Letter will be 1/8” thru 2” GS O = Normally Open advanced to identify indicates nonstandard U = Universal product changes Accessories, Supplies & Commodities Valve Type 2 = 2 Way 3 = 3 Way 22 Tools & Instruments 2 Electrical HFE Motors Various Tyfoxit Heating Components Fluid Name Ethylene & Propylene Glycol K-158 Refrigeration Our Industrial Solenoid Valves are approved for use with the fluid utilized in secondary loops such as Ethylene and Propylene Glycol and Tyfoxit. The recommended seat material is Buna-N. These valves referenced above are as follows: 202CB 211CA 214CA 203CA 204CD 222CB 210CA 314UB When ordering valves for the above stated application, be sure to mention the Elastomer Code “B” which designates Buna-N. Compressors, Chillers, Condensers Refrigeration Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 29 Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 202CB The 202CB is a direct-acting, normally closed valve for control of air, water, and steam applications. Specifications • 1/8” NPT Solenoid Valve • Watts: • VA Inrush: • VA Holding: • Maximum working pressure: Features • Superior life with stainless steel enclosing tube • Repair kits available Options • Brass or stainless steel bodies • Optional Voltages: 12 or 24 VDC & 120-240,480 & 240-480/50-60 Hz • Weight: • Standard Voltages: • UL/CUL file number: 12 A.C., 15 D.C. 28 19 500 psi (1000 psi - 3/64’ orifice only) 1 lb 24, 120, 208-240/50-60Hz MP604 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Ordering Information* Brass General Purpose Pipe Size Orifice Size AC DC Cv Size 1/8 3/64 500 500 0.05 180°F 1/8 1/16 500 500 0.12 180°F 1/8 3/32 300 125 0.22 180°F 1/8 1/8 150 75 0.34 180°F 1/8 5/32 100 40 0.48 180°F Recommended Coils Insulation Enclosure A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded Elastomer Description G Junction Box PCN BUNA-N 202CB1/8B3/64B G Junction Box BUNA-N 202CB1/8B1/16B G Junction Box BUNA-N 202CB1/8B3/32B G Junction Box 030113 BUNA-N 202CB1/8B1/8B G Junction Box 030114 BUNA-N 202CB1/8B5/32B PCN Elastomer Description BUNA-N 202CB1/8S3/64B BUNA-N 202CB1/8S1/16B G Junction Box BUNA-N 202CB1/8S3/32B G Junction Box BUNA-N 202CB1/8S1/8B G Junction Box BUNA-N 202CB1/8S5/32B Stainless Steel General Purpose Pipe Size Orifice Size AC DC Cv Size 1/8 3/64 500 500 0.05 180°F 1/8 1/16 500 500 0.12 180°F 1/8 3/32 300 125 0.22 180°F 1/8 1/8 150 75 0.34 180°F 1/8 5/32 100 40 0.48 180°F Recommended Coils Insulation Enclosure A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded G Junction Box G Junction Box 064756 Brass Steam Pipe Size Orifice Size AC DC Cv Size Recommended Coils Insulation Enclosure 1/8 1/16 150 – 0.12 400°F A 12 Watts H Class H Molded G Junction Box 1/8 3/32 150 – 0.22 400°F A 12 Watts H Class H Molded G Junction Box 1/8 1/8 150 – 0.34 400°F A 12 Watts H Class H Molded G Junction Box 1/8 5/32 100 – 0.48 400°F A 12 Watts H Class H Molded G Junction Box Pipe Size Orifice Size 1/8 1/8 AC DC Cv 150 – 0.34 Size 400°F Recommended Coils Insulation Enclosure A 12 Watts H Class H Molded K-159 G Junction Box PCN Elastomer PTFE w/Ethylene Propylene Gaskets 030122 PTFE w/Ethylene Propylene Gaskets 030123 PTFE w/Ethylene Propylene Gaskets PTFE w/Ethylene Propylene Gaskets Description 202CB1/8B1/16T 202CB1/8B3/32T 202CB1/8B1/8T 202CB1/8B5/32T PCN Elastomer Description 030118 Ethylene Prop. 202CB1/8B1/8P Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 30 EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 202CB Pipe Size Orifice Size 1/8 5/32 AC DC Cv 100 – 0.48 Size 400°F Recommended Coils Insulation Enclosure A 12 Watts G Junction Box H Class H Molded PCN Elastomer Description 056954 Ethylene Prop. 202CB1/8B5/32V 1 With an ambient temperature of 77°F. Maximum Operating Pressure Differential. * VLC -See coil assemblies for availability. 2 Heating Components Electrical Motors Dimensional Data (in) Compressors, Chillers, Condensers Refrigeration Change body material code. Example: Change standard 204CD1/4S to non-standard 204CD1/4T (silver shading band) Valve Kit Repairs Seat Material Kit # PCN Buna-N Viton Rulon Ethylene Propylene K-1063 K-1065 K-1068 K-1064 021103 032955 032396 021104 Coil Assembly See coil assemblies for availability.. K-160 Refrigeration Valve Repair Kit “K” indicates part is supplied in valve repair kit. Tools & Instruments Accessories, Supplies & Commodities Exploded View Thermostats To Order Add suffix “M” to catalog number. Add suffix “A” to catalog number. Oils & Chemicals Options Manual Override (not for steam) Minimum order qty. 100 Adjustable Metering (not for steam) 500 psi SWP for All orifice sizes. Silver Shading Band (on stainless steel valves) Indoor Air Quality Valve Options Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 31 EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 203CA The 203CA is a direct-acting, 2-way normally closed valve for air, water and steam applications. Features • Superior life with stainless steel enclosing tubes • Forged brass body with large wrench flats • Repair kits available Options • Optional Voltages: 120-240, 480 & 240-480/50-60 Hz Specifications • 3/8” NPT Solenoid Valve 12 A.C. • Watts: 37 for 5/32 & 1/8 orifices 47 for 1/4 + orifices • VA Inrush: 19 • VA Holding: 500 psi • Maximum working pressure: 1 lb. 4 oz. • Weight: 24, 120, 208-240/50-60 Hz • Standard Voltages: MP604 • UL/CUL file number Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Ordering Information* Brass General Purpose Pipe Size Orifice Size 3/8 3/8 3/8 3/8 3/8 1/8 5/32 1/4 5/16 3/8 Cv 125 75 25 15 10 Size 0.3 0.5 1.0 1.5 1.7 180°F 180°F 180°F 180°F 180°F Recommended Coils Insulation Enclosure A 12 Watts AC A 12 Watts AC A 12 Watts AC A 12 Watts AC A 12 Watts AC M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded Thermostats Cv Size 3/8 1/4 15 1.0 250°F 3/8 5/16 15 1.5 250°F 3/8 3/8 10 1.7 250°F Recommended Coils Insulation Enclosure A 12 Watts AC M Class F Molded G Junction Box PCN Elastomer Ethylene Propylene Gaskets A 12 Watts AC M Class F Molded G Junction Box Ethylene Propylene Gaskets A 12 Watts AC M Class F Molded G Junction Box 030614 Ethylene Propylene Gaskets 1 With an ambient temperature of 77°F. Maximum Operating Pressure Differential. *VLC - See coil assemblies for abailability. 2 Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Description 203CA3/8B1/8B 203CA3/8B5/32B 203CA3/8B1/4B 203CA3/8B5/16B 203CA3/8B3/8B Stainless Steel General Purpose Pipe Size Orifice Size Refrigeration PCN Elastomer G Junction Box BUNA-N G Junction Box BUNA-N G Junction Box 030603 BUNA-N G Junction Box BUNA-N G Junction Box 030605 BUNA-N K-161 Description 203CA3/8B1/4P 203CA3/8B5/16P 203CA3/8B3/8P Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 32 Refrigeration Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 203CA Valve Repair Kits Orifice Size Seat Material Kit # PCN 1/4, 5/16, 3/8 1/4, 5/16, 3/8 Buna-N Ethylene Propylene K-1104 K-1106 021108 040598 K-162 Refrigeration Tools & Instruments Valve Repair Kit “K” indicates part is supplied in valve repair kit. Coil Assembly See coil assemblies for availability. Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Exploded View Heating Components Electrical Motors Dimensional Data (in) Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 33 Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 204CD The 204CD is a direct-acting unidirectional, normally closed valve for air, water and steam applications. Features • Superior life with stainless steel enclosing tubes • Repair kits available Options • Brass or stainless steel bodies • Optional Voltages: 12 or 24 VDC & 120-240, 480 & 240-480/50-60 Hz Brass General Purpose Heating Components Indoor Air Quality AC DC Recommended Coils Size Insulation Enclosure Cv 1/4 3/64 500 500 0.05 180°F 1/4 1/16 500 500 0.12 180°F 1/4 3/32 300 125 0.22 180°F 1/4 1/8 150 75 0.34 180°F 1/4 5/32 100 40 0.48 180°F 1/4 3/16 60 30 0.56 180°F 1/4 1/4 20 10 0.70 180°F A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded G Junction Box G Junction Box G Junction Box G Junction Box G Junction Box G Junction Box G Junction Box PCN Elastomer Description 030731 BUNA-N 204CD1/4B3/64B BUNA-N 204CD1/4B1/16B 030733 BUNA-N 204CD1/4B3/32B 056110 BUNA-N 204CD1/4B1/8B 030735 BUNA-N 204CD1/4B5/32B 030736 BUNA-N 204CD1/4B3/16B 030737 BUNA-N 204CD1/4B1/4B PCN Elastomer Description BUNA-N 204CD1/4S3/64B BUNA-N 204CD1/4S1/16B 030870 BUNA-N 204CD1/4S3/32B 030871 BUNA-N 204CD1/4S1/8B BUNA-N 204CD1/4S5/32B BUNA-N 204CD1/4S3/16B BUNA-N 204CD1/4S1/4B Stainless Steel General Purpose DC Recommended Coils Size Insulation Enclosure Cv 500 500 0.05 180°F 1/4 1/16 500 500 0.12 180°F 1/4 3/32 300 125 0.22 180°F 1/4 1/8 150 75 0.34 180°F 1/4 5/32 100 40 0.48 180°F 1/4 3/16 60 30 0.56 180°F 1/4 1/4 20 10 0.70 180°F A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC A 12 Watts AC 15 Watts DC M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded G Junction Box G Junction Box G Junction Box G Junction Box G Junction Box G Junction Box G Junction Box Tools & Instruments 3/64 Oils & Chemicals AC Accessories, Supplies & Commodities Pipe Size Orifice Size 1/4 Refrigeration 12 A.C., 15 D.C. 31 19 500 psi 1 lb. 3 oz. 24, 120, 208-240/50-60 Hz MP604 Ordering Information* Pipe Size Orifice Size Thermostats Specifications • 1/4” NPT Solenoid Valve • Watts: • VA Inrush: • VA Holding: • Maximum working pressure: • Weight: • Standard Voltages: • UL/CUL file number: K-163 030874 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 34 EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 204CD Brass Steam 0.05 400°F 1/4 1/16 150 – 0.12 400°F 1/4 3/32 150 – 0.22 400°F 1/4 1/8 150 – 0.34 400°F 1/4 5/32 100 – 0.48 400°F 1/4 3/16 60 – 0.56 400°F 1/4 1/4 20 – 0.70 250°F A 12 Watts AC A A 12 Watts AC A A 12 Watts AC A A 12 Watts AC A A 12 Watts AC A A 12 Watts AC A A 12 Watts AC A H Class H Molded M H Class H Molded M H Class H Molded M H Class H Molded M H Class H Molded M H Class H Molded M H Class H Molded M G Junction PTFE w/Ethylene Box G Propylene Gaskets G Junction PTFE w/Ethylene Box G Propylene Gaskets G Junction 030748 PTFE w/Ethylene Box G Propylene Gaskets G Junction 030749 PTFE w/Ethylene Box G Propylene Gaskets G Junction 030750 PTFE w/Ethylene Box G Propylene Gaskets G Junction PTFE w/Ethylene Box G Propylene Gaskets E.P. Seat G Junction Box G 204CD1/4B3/64T 204CD1/4B1/16T 204CD1/4B3/32T 204CD1/4B1/8T 204CD1/4B5/32T 204CD1/4B3/16T 204CD1/4B1/4P Stainless Steel Steam Recommended Coils Size Insulation Enclosure Pipe Size 1/4 Orifice Size AC DC Cv 3/64 150 – 0.05 400°F 1/4 1/16 150 – 0.12 400°F 1/4 3/32 150 – 0.22 400°F 1/4 1/8 150 – 0.34 400°F 1/4 5/32 100 – 0.48 400°F 1/4 3/16 60 – 0.56 400°F 1/4 1/4 20 – 0.70 250°F A 12 Watts AC A A 12 Watts AC A A 12 Watts AC A A 12 Watts AC A A 12 Watts AC A A 12 Watts AC A A 12 Watts AC A H Class H Molded M H Class H Molded M H Class H Molded M H Class H Molded M H Class H Molded M H Class H Molded M H Class H Molded M PCN Elastomer G Junction 030883 PTFE w/Ethylene Box G Propylene Gaskets G Junction PTFE w/Ethylene Box G Propylene Gaskets G Junction PTFE w/Ethylene Box G Propylene Gaskets G Junction 030886 PTFE w/Ethylene Box G Propylene Gaskets G Junction PTFE w/Ethylene Box G Propylene Gaskets G Junction 030888 PTFE w/Ethylene Box G Propylene Gaskets E.P. Seat G Junction Box G Description 204CD1/4S3/64T 204CD1/4S1/16T 204CD1/4S3/32T 204CD1/4S1/8T 204CD1/4S5/32T 204CD1/4S3/16T 204CD1/4S1/4P Stainless Steel Steam Pipe Size Orifice Size 1/4 5/32 AC DC Cv 100 – 0.48 AC DC Cv 100 – 0.48 Recommended Coils Size Insulation Enclosure 400°F PCN A 12 Watts H Class H G Junction 053492 Molded Box Elastomer Description E.P. Seat 204CD1/4S5/3P Brass Steam Pipe Size Orifice Size 1/4 5/32 Recommended Coils Size Insulation Enclosure 400°F PCN A 12 Watts H Class H G Junction 064682 Molded Box 1 With an ambient temperature of 77°F. Maximum Operating Pressure Differential. *VLC -See coil assemblies for availability. Elastomer Description E.P. Seat 204CD 1/4 B 5/32 P Tools & Instruments 2 Motors – Description Electrical 150 Elastomer Heating Components 3/64 PCN Indoor Air Quality Cv Thermostats DC Oils & Chemicals AC K-164 Refrigeration Orifice Size Accessories, Supplies & Commodities Recommended Coils Size Insulation Enclosure Pipe Size 1/4 Compressors, Chillers, Condensers Refrigeration Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 35 EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 204CD Dimensional Data (in) Valve Options Options Manual Override (not for steam) Minimum order qty. 100 Adjustable Metering (not for steam) 500 psi SWP for All orifice sizes. Silver Shading Band (on stainless steel valves) To Order Add suffix “M” to catalog number. Add suffix “A” to catalog number. Change body material code. Example: Change standard 204CD1/4S to non-standard 204CD1/4T (silver shading band) Valve Kit Repairs Seat Material Kit # Buna-N Viton Rulon Ethylene Propylene Buna-N (1/4 orifi ce only) K-1072 K-1074 K-1077 K-1076 K-1162 Exploded View Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Valve Repair Kit “K” indicates part is supplied in valve repair kit. Coil Assembly For available coil assemblies, see page 126. K-165 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 36 Refrigeration Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 210CA/211CA The 210CA/211CA is a 2-way normally closed valve used in air, water and steam applications. The 210CA valve is pilot-operated and the 211CA valve is direct-acting. Features • Unique captive diaphragm and seal • Superior life with stainless steel enclosing tube • Repair kits available Motors Options • Optional Voltages: 12 or 24 VDC & 120-240, 480 & 240-480/50-60 Hz Specifications • Watts: • VA Inrush: • VA Holding: • Maximum working pressure: • Weight • Standard Voltages: • Diaphragm Operated Solenoid Valve: 210CA - from 5 to 150 psi. 3/8” to 1” NPT 211CA - from 0 to 100 psi. 3/8” to 3/4” NPT • UL/CUL file number: 5/8 5/8 3/4 1 150 150 125 125 Recommended Coils Insulation Enclosure Size 2.8 3.6 5.5 13 180°F 180°F 180°F 180°F A 12 Watts AC A 12 Watts AC A 12 Watts AC A 12 Watts AC M Class F Molded M Class F Molded M Class F Molded M Class F Molded G Junction Box G Junction Box G Junction Box G Junction Box PCN Elastomer Description 030619 030620 030621 038629 BUNA-N BUNA-N BUNA-N BUNA-N 210CA3/8B5/8B 210CA1/2B5/8B 210CA3/4B3/4B 210CA1B1B Brass-Hot Water (210°F) or Steam (TO 250°) M.O.P.D AC Pipe Size Orifice Size 3/8 1/2 3/4 Cv 5/8 5/8 3/4 2.8 3.6 5.5 Recommended Coils Insulation Enclosure Size 250°F 250°F 250°F A 12 Watts AC M Class F Molded G Junction Box A 12 Watts AC M Class F Molded G Junction Box A 12 Watts AC M Class F Molded G Junction Box PCN Elastomer Description 030623 030624 Ethylene Propylene Ethylene Propylene Ethylene Propylene 210CA3/8B5/8P 210CA1/2B5/8P 210CA3/4B348P 211CA Ordering Information* Brass General Purpose. Pipe Size Orifice Size 3/8 1/2 3/4 M.O.P.D AC Cv 3/8 1/2 3/4 100 100 100 Recommended Coils Insulation Enclosure Size 2.8 3.6 5.5 180°F 180°F 180°F A 12 Watts AC M Class F Molded G Junction Box A 12 Watts AC M Class F Molded G Junction Box A 12 Watts AC M Class F Molded G Junction Box PCN Elastomer Description 030625 030626 030627 BUNA-N BUNA-N BUNA-N 211CA3/8B5/8B 211CA1/2B5/8B 211CA3/4B3/4B Brass-Hot Water (210°F) or Steam (TO 250°). Pipe Size Orifice Size 3/8 1/2 3/4 5/8 5/8 3/4 M.O.P.D AC Cv 2.8 3.6 5.5 Recommended Coils Insulation Enclosure Size 250°F 250°F 250°F A 12 Watts AC M Class F Molded G Junction Box A 12 Watts AC M Class F Molded G Junction Box A 12 Watts AC M Class F Molded G Junction Box 1 3 2 * With an ambient temperature of 77°F. MOPD-Hot Water MOPD VLC K-166 PCN Elastomer Description 032303 032304 032305 Ethylene Propylene Ethylene Propylene Ethylene Propylene 211CA3/8B5/8P 211CA1/2B5/8P 211CA3/4B348P Thermostats 3/8 1/2 3/4 1 M.O.P.D AC Cv Oils & Chemicals Pipe Size Orifice Size Accessories, Supplies & Commodities Brass General Purpose Tools & Instruments 210CA Ordering Information* Refrigeration MP604 Indoor Air Quality Heating Components Electrical 12 A.C. 31 19 300 psi (250 psi on 1” 210C only) 1 lb. 3 oz. 24, 120, 208-240/50-60 Hz Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 37 EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 210CA/211CA Dimensional Data (in) Pipe Size 3/8 1/2 3/4 1* A B C 3.56 2.75 0.53 3.83 4.55 2.81 4.16 0.66 0.84 D 2.29 4.31 * 1” Pipe available on 210C valve only. 210CA Valve Repair Kits Seat Material PCN Buna-N Ethylene Propylene Buna-N Ethylene Propylene Buna-N 028964 029856 045072 045083 038934 Connection Size 3/8 & 1/2 3/4 1 K-1155 K-1156 K-1231 K-1232 K-1177 211CA Valve Repair Kits Seat Material Kit # Buna-N Ethylene Propylene K-1157 K-1158 Exploded View Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Valve Repair Kit “K” indicates part is supplied in valve repair kit. Coil Assembly See coil assemblies for availability. K-167 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 38 Refrigeration Brass General Purpose Pipe Size AC Cv 1/4 Orifice Size 1/4 Size 200 1.2 180°F 1/4 5/16 200 1.6 180°F 1/4 3/8 200 2.2 180°F 3/8 1/4 200 1.2 180°F 3/8 5/16 200 1.6 180°F 3/8 3/8 200 2.2 180°F 3/8 3/8 200 2.2 400°F A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz Recommended Coils Insulation Enclosure M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded Elastomer Description G Junction Box 030540 BUNA-N 214CB1/4B1/4B G Junction Box 030541 BUNA-N 214CB1/4B5/16B G Junction Box BUNA-N 214CB1/4B3/8B G Junction Box BUNA-N 214CB3/8B1/4B G Junction Box BUNA-N 214CB3/8B5/16B G Junction Box 030545 BUNA-N 214CB3/8B3/8B G Junction Box 030557 EP Seat 214CB 3/8B3/8P 1 With an ambient temperature of 77°F. Maximum Operating Pressure Differential. *VLC - See coil assemblies for availability. PCN Electrical Ordering Information* Heating Components 12 @ 60Hz 44 2 350 psi 1 lb. 4 oz. 24, 120, 208-240/50-60 Hz 2 to 200 P.S.I. MP604 Indoor Air Quality Specifications • 1/4” & 3/8” NPT Solenoids • Watts: • VA Inrush: • VA Holding: • Maximum working pressure: • Weight: • Standard Voltages: • Pilot Operated: • UL/CUL file number: Thermostats Options • Optional Voltages: 480, 120-240 & 240-480/50-60 Hz Motors Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 214CB The 214CB is a 2-way normally closed valve for air, water, and steam applications. Features • Superior life with stainless steel enclosing tube • Forged brass body with large wrench flats • PTFE O-ring for superior external leakage • Repair kits available K-168 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals 2 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 39 EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 214CB Dimensional Data (in) Valve Options Options Manual Override To Order Add suffix “M” to catalog number. Valve Repair Kits Seat Material Kit # Buna-N Ethylene Propylene K-1112 K-1113 Exploded View Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Refrigeration Tools & Instruments Valve Repair Kit Valve Repair “K” indicates part is supplied in valve repair kit. Coil Assemblies See coil assemblies for availability. K-169 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 40 Refrigeration Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 222CB The 222CB is a 2-way normally closed valve for air, water, and steam applications. Electrical Heating Components Pipe Size 3/8, 1/2 1 lb. 8 oz. 3/4 3 lbs. 1 4 lbs. 4 oz. 1-1/4 6 lbs. 2 oz. 1-1/2 8 lbs. 6 oz. 1/2 1/2 3/4 1 1-1/4 1-1/2 Cv 250 250 250 250 250 250 3.5 3.5 7.0 13.0 16.0 25.0 Size 180°F 180°F 180°F 180°F 180°F 180°F Recommended Coils Insulation A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded M Class F Molded Enclosure PCN Elastomer Description G Junction Box G Junction Box G Junction Box G Junction Box G Junction Box G Junction Box 039917 028192 039931 039918 038879 BUNA-N BUNA-N BUNA-N BUNA-N BUNA-N BUNA-N 222CB3/8B1/2B 222CB1/2B1/2B 222CB3/4B3/4B 222CB1B1B 222CB1-1/4B1-1/4B 222CB1-1/2B1-1/2B Brass Steam Pipe Size Orifice Size AC Cv Size 3/8 1/2 150 3.5 400°F 1/2 1/2 150 3.5 400°F 3/4 3/4 150 7.0 400°F 1 1 150 13.0 400°F 1-1/4 1-1/4 150 16.0 400°F 1-1/2 1-1/2 150 25.0 400°F Recommended Coils Insulation A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz A 12 Watts @ 60 Hz PCN Elastomer Description H Class F Molded G Junction Box Enclosure 041518 222CB3/8B1/2T H Class F Molded G Junction Box 037958 H Class F Molded G Junction Box 039930 H Class F Molded G Junction Box 039834 H Class F Molded G Junction Box 040532 H Class F Molded G Junction Box 040582 Rulon with Ethylene Propylene Gaskets Rulon with Ethylene Propylene Gaskets Rulon with Ethylene Propylene Gaskets Rulon with Ethylene Propylene Gaskets Rulon with Ethylene Propylene Gaskets Rulon with Ethylene Propylene Gaskets 222CB1/2B1/2T 222CB3/4B3/4T 222CB1B1T 222CB1-1/4B1-1/4T 222CB1-1/2B1-1/2T Brass Steam Pipe Size Orifice Size AC Cv 3/4 3/4 150 7.0 1 Size 400’F With an ambient temperature of 77°F. Maximum Operating Pressure Differential. 2 Recommended Coils Insulation A 12 Watts @ 60 Hz H Class F Molded Enclosure PCN G Junction Box 041314 *VLC - See coil assemblies for availability. K-170 Elastomer Description Ethylene Prop. 222CB- 3/4 B-3/4 P Accessories, Supplies & Commodities 3/8 1/2 3/4 1 1-1/4 1-1/2 AC Tools & Instruments Pipe Size Orifice Size Oils & Chemicals Brass General Purpose Thermostats Indoor Air Quality Ordering Information* Refrigeration • Weights: Motors Features • Forged brass body with large wrench flats • Repair kits available Options • Optional Voltages: 480, 120-240 & 240-480/50-60 Hz Specifications • 3/8” & 1 1/2” NPT Solenoids • Rulon Seat Material • Watts: 12 @ 60Hz • VA Inrush: 38 • VA Holding: 19 • Maximum working pressure: 300 psi • Minimum Operating Pressure Differential : 5 psi • Standard Voltages: 24, 120, 208-240/50-60 Hz • UL/CUL file number: MP604 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 41 EMERSON CLIMATE TECHNOLOGIES-Industrial Exploded View Solenoid Valves 222CB 222CB Dimensional Data (in) Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Orifice Size 1/2 3/4 1 1 1/4 1 1/2 A* 4.59 4.91 5.38 5.66 6.16 B 2.47 3.25 4.06 4.56 5.25 C 1.63 2.06 2.63 3.00 3.44 Indoor Air Quality * Add 0.97 for Manual Override Valve Options Options Manual Override (not for steam) Field Installed To Order Add suffix “M” to catalog number Seat Material PCN 3/8 & 1/2 Buna-N Rulon Buna-N Rulon Ethylene Propylene Buna-N Rulon Buna-N Rulon Buna-N Rulon 030765 029235 037558 021109 040680 028955 034178 031349 034047 028956 032334 K-1116 K-1118 Orifice Size - NPT 3/4 1 1-1/4 1-1/2 Valve Repair Kit “K” indicates part is supplied in valve repair kit. K-1120 K-1122 K-1121 Coil Assembly See coil assemblies for availability. K-1124 K-1126 K-1128 K-1130 K-1132 K-1134 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats 222CB Valve Repair Kits K-171 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 42 EMERSON CLIMATE TECHNOLOGIES-Industrial Exploded View Solenoid Valves 222CB Electrical Motors 222CB Dimensional Data (in) Compressors, Chillers, Condensers Refrigeration A* 4.59 4.91 5.38 5.66 6.16 B 2.47 3.25 4.06 4.56 5.25 C 1.63 2.06 2.63 3.00 3.44 Heating Components Orifice Size 1/2 3/4 1 1 1/4 1 1/2 * Add 0.97 for Manual Override Options Manual Override (not for steam) Field Installed Indoor Air Quality Valve Options To Order Add suffix “M” to catalog number 030765 029235 037558 021109 040680 028955 034178 031349 034047 028956 032334 K-1116 K-1118 1-1/4 1-1/2 Valve Repair Kit “K” indicates part is supplied in valve repair kit. K-1120 K-1122 K-1121 Coil Assembly See coil assemblies for availability. K-1124 K-1126 K-1128 K-1130 K-1132 K-1134 Oils & Chemicals Buna-N Rulon Buna-N Rulon Ethylene Propylene Buna-N Rulon Buna-N Rulon Buna-N Rulon Orifice Size - NPT 3/4 1 Accessories, Supplies & Commodities 3/8 & 1/2 Tools & Instruments PCN K-172 Refrigeration Seat Material Thermostats 222CB Valve Repair Kits Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 43 EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 314UB The 314UB is a direct-acting, 3-way universal valve for air and water applications. Features • Rugged industrial construction • Both seat discs are spring loaded • Superior life with stainless steel enclosing tube Options • Brass or stainless steel bodies • Optional Voltages: 480, 120-240 & 240480/50-60 Hz Specifications • 1/4” NPT Solenoids • Watts: • VA Inrush: • VA Holding: • Maximum working pressure: • Weight: • Standard Voltages: • UL/CUL file number: NOTE: 314U valves require an AMGN, EM or ASC-Type coil. Ordering Information* 12 @ 60Hz 36 24 500 psi 1 lb. 24, 120, 208240/50-60 Hz MP604 Brass General Purpose PCN Pipe Size Orifice Size 030722 1/4 3/64 030719 1/4 3/32 AC 125 40 Cv Port 2 Port 3 .05 .22 .06 .17 Size 180°F 180°F Recommended Coils Insulation Enclosure Elastomer A 12 Watts @ 60 Hz M Class F Molded GN Junction Box BUNA-N A 12 Watts @ 60 Hz M Class F Molded GN Junction Box BUNA-N Description 314UB1/4B3/64B3/64B 314UB1/4B3/32B3/32B Stainless Steel General Purpose PCN Pipe Size Orifice Size 030725 1/4 3/64 AC 125 Cv Port 2 Port 3 .05 .06 Size 180°F Recommended Coils Insulation Enclosure Elastomer A 12 Watts @ 60 Hz M Class F Molded GN Junction Box BUNA-N Description 314UB1/4S3/64B3/64B 1 With an ambient temperature of 77°F. Maximum Operating Pressure Differential. *VLC - See coil assemblies for availability. 2 EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves 314UB Dimensional Data (in) Valve Options Valve Repair Kit “K” indicates part is supplied in valve repair kit. Coil Assembly See coil assemblies for availability. Options Silver Shading Band (on stainless steel valves) To Order Change body material code. Example: Change standard 314UB1/8S to nonstandard 314UB1/bT (silver shading band) Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Accessories, Supplies & Commodities Exploded View Refrigeration Tools & Instruments Valve Repair Kit K-173 Seat Material Kit # PCN Buna-N K-1093 037054 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 44 Hermetic Filter Driers Type Liquid Liquid Liquid Liquid Suction Suction Suction Suction Suction Filter Drier EK ADK BOK-HH BFK SFD CSFD ASD ASK-HH ASF Recommended Use CFC, HCFC, HFC CFC, HCFC, HFC CFC, HCFC, HFC CFC, HCFC, HFC CFC, HCFC, HFC CFC, HCFC, HFC CFC, HCFC, HFC CFC, HCFC, HFC CFC, HCFC, HFC Function Premium Universal Replacement High Acid and Water Removal Burnout Cleanup with Charcoal Bi-Flow Heat Pump Suction Line Filter Drier Compact Suction Line Filter Drier Premium Suction Line Filter Drier Burnout Cleanup with Charcoal Filter Only Liquid X X Suction X X X Take-Apart Filter Driers Type Take-Apart Take-Apart Take-Apart Filter Drier STAS ADKS BTAS Replaceable Cores/Filters for Take-Apart Shells Core/Filter D-42/48 H-42/48/100 W-42/48/100HH UK-48/100 F-48/100 RH-48 RW -48 Recommended use CFC, HCFC CFC, HCFC CFC, HCFC, HFC CFC, HCFC, HFC CFC, HCFC, HFC Reclaim Use Only Reclaim Use Only Function High Acid Removal High Acid and W ater Removal Burnout Cleanup w/Charcoal Premium Universal Replacement Filter Only High Acid and W ater Removal Burnout Cleanup Motors Electrical Tools & Instruments Type Core Core Core Core Filter Core Core Heating Components EMERSON CLIMATE TECHNOLOGIES-System Protectors Quick Select Guide Indoor Air Quality New PCN 030735 030736 030737 030750 030540 064854 030545 039917 028192 039931 039918 038879 037958 039930 039834 040532 040582 030619 030620 030621 038629 Thermostats New Model 204CD 1/4B 5/32 B VLC 204CD 1/4B 3/16 B VLC 204CD 1/4B 1/4 B VLC 204CD 1/4B 5/32 T VLC 214CB 1/4B 1/4 B VLC 214CB 3/8B 5/16 B VLC 214CB 3/8B 3/8 B VLC 222CB 1/2 B 1/2 B VLC 222CB 3/4 B 3/4 B VLC 222CB 1 B 1 B VLC 222CB 1-1/4 B 1-1/4 B VLC 222CB 1-1/2 B 1-1/2 B VLC 222CB 1/2 B 1/2 T VLC 222CB 3/4 B 3/4 T VLC 222CB 1 B 1 T VLC 222CB 1-1/4 B 1-1/4 T VLC 222CB 1-1/2 B 1-1/2 T VLC 210CA 3/8 B 5/8 B VLC 210CA 1/2 B 5/8 B VLC 210CA 3/4 B 3/4 B VLC 210CA 1 B 1 B VLC Oils & Chemicals Old PCN 030038 040412 040337 040300 091876 040758 065610 030051 039987 034211 040283 040021 034171 040069 030048 040365 040366 035073 035023 035022 038857 K-174 Refrigeration Old Model 121WB5CP02 121WB03P02 121WB04P02 121SB5CP02 201WB04P02 201WB05P02 201WB06P02 231WB08P04 231WB12P06 231WB16P08 231WB20P10 231WB24P12 231SB08P04 231SB12P06 231SB16P08 231SB20P10 231SB24P12 241WA10P03 241WA10P04 241WA12P06 241WA16P08 Accessories, Supplies & Commodities EMERSON CLIMATE TECHNOLOGIES-Industrial Solenoid Valves Old to New Cross Reference Compressors, Chillers, Condensers Refrigeration Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 45 EMERSON CLIMATE TECHNOLOGIES-System Protectors Recommended System Tonnage Take-Apart Liquid Line Filter Driers in Tons* Refrigeration, Low Temp. & Commercial Installations Description STAS 485T STAS 487T STAS 489T STAS 4811T STAS 967T STAS 969T STAS 9611T STAS 9613T STAS-9625S-V STAS 1449T STAS 14411T STAS 14413T STAS 14417T STAS 19211T STAS 19213T STAS 19217T ADKS 30013T ADKS 30017T ADKS 40017T ADKS 40021T R-12/R-134a 8 10 10 13 20 25 30 35 40 30 40 45 60 50 60 65 50 60 65 75 R-22 10 13 15 20 25 30 35 40 45 40 50 55 50 70 80 85 65 80 85 100 R-404A/R-502/R-507A 8 10 10 13 15 20 25 30 35 30 35 40 45 45 55 60 45 50 55 65 * For kW, multiply tons by 3.5 + Consult product catalog pages for R-410A suitability. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-175 Air Conditioning Field Replacement & Field Installations R-12/R-134a 8 10 10 13 20 25 30 35 40 30 40 45 50 50 60 65 50 60 65 75 R-22/R-407C/R-410A+ 10 12 1/2 15 20 25 30 35 40 45 40 50 55 60 70 80 85 65 80 85 100 Sec#10d Refridge 46pages 2011_Fridge 12/9/2010 4:54 PM Page 46 EMERSON CLIMATE TECHNOLOGIES-System Protectors Recommended System Tonnage Hermetic Liquid Line Filter Driers (EK, ADK, BFK, BOK) (Recommended Capacities at 2 psi drop (See catalog page showing ARI data for capacity at 1 psi drop.) Refrigeration Low Temp. & Commercial Installations 1/2 1 1-1/2 033 033S 052 052S 053 053S 3/4 3/4 1-1/2 2 1-1/2 3 4 1 3/4 1-1/2 2 2 1 3 4 4 5 5 7-1/2 082 082S 1 0825S 083 083S 084 3 2 4 084S 162 162S 1625S 2 1-1/2 2 1 1-1/2 2 2 3 2 3 4 4 5 5 10 7-1/2 7-1/2 12 5 4 6 7-1/2 10 10 15 18 24 20 26 4 5 5 5 7-1/2 12 12 18 163 163S 164 164S 5 3 3 165 165S 303 303S 304 4 7-1/2 304S 4 305 305S 307S 7-1/2 309S 10 5 15 413 414 4 5 7-1/2 7-1/2 414S 417S 419S 757S 759S 10 20 22 7-1/2 10 18 25 12 10 20 27 25 30 15 20 22 25 30 34 Tools & Instruments 415 415S Heating Components 032 032S Electrical Motors R-22/R-407C/R-410A Indoor Air Quality 1/2 R-12/R-134a Thermostats 1/2 R-404A/R-502/R-507 Oils & Chemicals R-22 Accessories, Supplies & Commodities R-12/R-134a K-176 Refrigeration Description Air Conditioning Field Replacement & Field Installations Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 1 EMERSON CLIMATE TECHNOLOGIES-System Protectors EK Liquid Line Filter Drier The EK Liquid Line Filter Drier is a premium compacted bead Filter Drier with a fine 20 micron fine outlet pad for maximum filtration. The EK is a premium universal replacement liquid line Filter Drier for CFC, HCFC and HFC refrigerants including R-12, R-134a, R-22, R-404A, R-407C, R-410A, R-500, R-502, and R-507. Features • Filtration first for more effective use of surface area of desiccant • High moisture and acid removal capacity • Solid copper connections • Corrosion resistant epoxy powder paint finish • Copeland® brand products approved for POE Oils • Shock resistant steel shell construction Specifications • Desiccant blend - optimized for high water capacity and acid capacity • Filtration: 20 microns • Maximum working pressure: 680 psig • UL/CUL file number: SA 3124 Nomenclature example: EK-083S EK 08 Drier Series Unit Size (in cu. in.) 3 Connection Size (in 1/8”) S S = ODF connections (omit for SAE) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-177 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 2 3.13 3.19 0.32 3.69 3.63 4.50 4.38 4.44 4.38 5.44 5.31 5.44 5.31 5.31 5.63 8.13 8.13 8.06 8.44 8.38 8.44 8.25 8.19 8.50 8.50 13.94 13.88 2.56 2.56 2.56 2.56 2.56 2.56 3.00 3.00 3.02 3.00 3.00 3.00 3.81 3.81 3.81 3.81 3.81 3.81 3.81 3.81 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 7.50 7.50 7.50 7.50 7.50 7.50 7.50 7.50 7.50 7.63 7.63 7.63 7.63 7.63 7.63 7.63 13.06 13.06 EK 032 EK 032S EK 032FM EK 032MF EK 033 EK 033S EK 052 EK 052MF EK 0525S EK 052S EK 053 EK 053S EK 082 EK 082S EK 0825S EK 083MF EK 083 EK 083S EK 084 EK 084S EK162 EK 162S EK 1625S EK 163 EK 163S EK 164 EK 164S EK 165 EK 165S EK 167S EK 303 EK 303S EK 304 EK 304S EK 305 EK 305S EK 306S EK 307S EK 309S EK 413 EK 414 EK 414S EK 415 EK 415S EK 417S EK 419S EK 757S EK 759S Tools & Instruments Does not include weld bead 1.63 1.63 1.63 1.63 1.63 1.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 3.06 3.06 3.06 3.06 3.06 3.06 3.06 3.06 3.06 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 K-178 Refrigeration 1 0.38 0.44 2.64 0.38 0.44 0.38 0.50 0.44 0.50 0.38 0.31 0.44 0.50 0.63 0.75 0.44 0.50 0.63 0.63 0.75 0.94 0.50 0.63 0.75 0.75 0.75 0.94 Description Motors 4.38 3.88 3.50 3.50 4.69 4.06 4.81 4.50 3.57 4.44 5.13 4.50 5.63 5.25 5.38 5.94 5.94 5.31 6.19 5.38 6.56 6.19 5.94 6.88 6.25 7.06 6.31 7.50 6.56 7.50 9.63 9.00 9.88 9.13 10.31 9.31 9.69 9.88 10.25 9.75 10.00 9.25 10.44 9.44 10.00 10.94 15.44 15.75 Weight (lbs) 0.50 0.50 0.50 0.50 0.50 0.50 0.88 0.88 0.88 0.88 0.88 0.88 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 3.75 3.75 3.75 3.75 3.75 3.75 3.75 3.75 3.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 7.50 7.50 Electrical 060009 060012 060011 060010 060013 060014 047601 057013 063978 047602 047603 047604 047605 047606 049551 056906 047607 047608 047609 047610 047611 047612 056045 047613 047614 047615 047616 047617 047618 047619 048210 048211 048212 048213 048214 048215 048216 048217 048218 048219 048220 048221 048222 048223 048224 048225 048228 048229 F Heating Components B Indoor Air Quality A Thermostats Dimensions (in) D E PCN Oils & Chemicals Ordering Information Accessories, Supplies & Commodities EMERSON CLIMATE TECHNOLOGIES-System Protectors EK Liquid Line Filter Drier Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 3 EMERSON CLIMATE TECHNOLOGIES-System Protectors EK Contractor’s Choice Filter Drier The EK Contractor’s Choice filter drier is designed for foodservice and residential air conditioning applications. Features • Extended solid copper connections • Dual access valves for faster and easier system diagnosis • Incorporates all the internal features of the premium EK Specifications • Desiccant blend – optimized for high water capacity and acid capacity • Filtration: 20 microns • Maximum working pressure: 680 psig • UL/CUL file number: SA 3124 Ordering Information PCN Description 063908 065966 065963 065964 065965 EK 032S VV EK 052S VV EK 053S VV EK 083S VV EK 163S VV EMERSON CLIMATE TECHNOLOGIES-System Protectors EK Cap Tube Filter Drier The EK Cap Tube filter drier is designed for foodservice refrigera- tion systems. Features • Schrader valve on the inlet side acts as a maintenance and charging port • Outlet is designed to accept capillary tubing without the need for crimping • Extended solid copper 1/4 ODF connection inlet by cap tube • Incorporates all the internal features of the premium EK Specifications • Desiccant blend - optimized for high water capacity and acid capacity • Filtration: 20 microns • Maximum working pressure: 680 psig • UL/CUL file number: SA 3124 Ordering Information PCN Description 063208 065846 EK 032 SV CAP (3 cubic inch) EK 052 SV CAP (5 cubic inch) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-179 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 4 EMERSON CLIMATE TECHNOLOGIES-System Protectors EK Filter Driers Capacity Tables 2 1 All ratings in accordance with ARI Standard 710-04. 86°F liquid refrigerant temperature 5°F saturated vapor temperature 3.1 lbs./min./ton for R-134a 2.9 lbs./min./ton for R-22 and R-407C 4.0 lbs./min./ton for R-404A/507 and R-12 2.7 lbs./min./ton for R-410A R-410A 37 40 33 33 25 21 19 38 37 42 37 116 106 114 97 95 75 64 58 109 106 120 107 237 218 235 200 195 155 159 118 224 217 245 371 341 368 313 305 240 206 186 350 340 306 664 611 657 561 548 434 515 355 627 608 536 919 785 765 607 938 2159 854 715 465 876 850 991 03 05 08 16 30 41 75 R-12 75°F 2.9 6.5 8.3 10.2 28.7 40.0 72.4 125°F 2.6 5.9 7.6 9.4 26.3 36.4 66.3 R-134a 75°F 2.6 6.0 7.6 9.4 26.4 36.9 66.7 125°F 2.3 5.4 6.9 8.6 23.9 33.1 60.3 Water Capacities are based on: Equilibrium Point Dryness (EPD) of: 50 parts per million for R-134a, R404A/507, R-410A and R-407C 60 parts per million for R-22 15 parts per million for R-12 R-22 75°F 2.6 5.9 7.5 9.3 26.1 36.4 65.8 125°F 2.3 5.3 6.8 8.4 23.5 32.5 59.2 R-407C 75°F 2.5 5.6 7.2 8.9 24.9 34.7 62.8 K-180 125°F 2.1 4.9 6.3 7.8 21.9 30.3 55.2 272 477 884 2019 2159 1880 1810 1460 1460 1111 2019 2019 2229 2019 2 3 20 drops of water = 1 gram = 1 cc 4 For 2 PSI ǻP, Multiply values by 1.4 Liquid Refrigerant Holding Capacity-Ounces Unit Size 217 Heating Components Electrical Motors 40 Indoor Air Quality 1.6 1.6 1.6 2.2 2.2 2.5 2.5 1.7 1.7 1.7 2.7 2.9 2.9 3.6 1.9 1.9 1.9 2.5 2.9 3.3 3.3 3.7 5.5 5.8 1.9 1.9 2.5 2.5 3.2 3.6 7.0 8.0 8.3 12.7 3.5 5.2 6.6 8.2 8.7 12.1 13.8 16.1 3.5 8.5 8.9 9.8 16.6 22.7 18.2 26.8 125° 75°F F R-407C Thermostats 1/4 Fem/1/4 Male SAE 1/4 Male/1/4 Fem SAE 1/4 SAE 1/4 ODF 1/4 ODF 3/8 SAE 3/8 ODF 1/4 Fem/1/4 Male SAE 1/4 Male/1/4 Fem SAE 1/4 SAE 1/4 ODF 3/8 Male/3/8 Fem SAE 3/8 SAE 3/8 ODF 1/4 Fem/1/4 Male SAE 1/4 Male/1/4 Fem SAE 1/4 SAE 1/4 ODF 5/16 ODF 3/8 Male/3/8 Fem SAE 3/8 SAE 3/8 ODF 1/2 SAE 1/2 ODF 1/4 Male/1/4 Fem SAE 1/4 SAE 1/4 ODF 5/16 ODF 3/8 SAE 3/8 ODF 1/2 ODF 5/8 SAE 5/8 ODF 7/8 ODF 3/8 SAE 3/8 ODF 1/2 SAE 1/2 ODF 5/8 SAE 3/4 ODF 7/8 ODF 1 1/8 ODF 3/8 SAE 1/2 SAE 1/2 ODF 5/8 SAE 7/8 ODF 1 1/8 ODF 7/8 ODF 1 1/8 ODF 75°F RR-502 404A/507 125° 125° 125° 125° 125° 75°F 75°F 75°F 75°F F F F F F R-22 Oils & Chemicals EK 03 2 FM EK 03 2 MF EK 03 2 EK 03 2 S EK 032 SV EK 03 3 EK 03 3 S EK 05 2 FM EK 05 2 MF EK 05 2 EK 05 2 S EK 05 3 MF EK 05 3 EK 05 3 S EK 08 2 FM EK 08 2 MF EK 08 2 EK 08 2 S EK 08 25 S EK 08 3 MF EK 08 3 EK 08 3 S EK 08 4 EK 08 4 S EK 16 2 MF EK 16 2 EK 16 2 S EK 16 25 S EK 16 3 EK 16 3 S EK 16 4 S EK 16 5 EK 16 5 S EK 16 7 S EK 30 3 EK 30 3 S EK 30 4 EK 30 4 S EK 30 5 EK 30 6 S EK 30 7 S EK 30 9 S EK 41 3 EK 41 4 EK 41 4 S EK 41 5 EK 41 7 S EK 41 9 S EK 75 7 S EK 75 9 S 125° R- R-22/R- R-407 R-04A/ 75°F F 134a 410A C R-507 2.0 2.2 2.1 1.4 2.0 2.2 2.1 1.4 2.0 2.2 2.1 1.4 47 41 2.7 2.9 2.9 2.0 2.7 2.9 2.9 2.0 3.0 3.3 3.2 2.2 3.0 3.3 3.2 2.2 2.1 2.3 2.2 1.5 2.1 2.3 2.2 1.5 2.1 2.3 2.2 1.5 133 119 3.3 3.6 3.5 2.4 3.5 3.8 3.7 2.5 3.5 3.8 3.7 2.5 4.4 4.8 4.7 3.2 2.3 2.5 2.4 1.7 2.3 2.5 2.4 1.7 2.3 2.5 2.4 1.7 3.1 3.4 3.3 2.2 3.5 3.8 3.7 2.5 274 240 4.0 4.3 4.3 2.9 4.0 4.3 4.3 2.9 4.5 4.9 4.8 3.3 6.7 7.3 7.1 4.9 7.1 7.7 7.5 5.1 2.3 2.5 2.4 1.7 2.3 2.5 2.4 1.7 3.1 3.4 3.3 2.2 3.1 3.4 3.3 2.2 3.9 4.2 4.1 2.8 347 301 4.4 4.8 4.7 3.2 8.5 9.2 9.0 6.2 9.7 10.5 10.3 7.0 10.1 10.9 10.7 7.3 15.5 16.8 16.5 11.2 4.3 4.7 4.6 3.1 6.3 6.8 6.7 4.6 8.1 8.8 8.6 5.9 10.0 10.8 10.6 7.2 10.6 11.5 11.3 7.7 601 526 14.8 16.0 15.7 10.7 16.8 18.2 17.9 12.2 19.6 21.2 20.8 14.2 4.3 4.7 4.6 3.1 10.4 11.3 11.1 7.5 10.8 11.7 11.5 7.8 12.0 13.0 12.8 8.7 1104 971 20.3 22.0 21.6 14.7 27.7 30.0 29.4 20.1 22.2 24.1 23.6 16.1 2368 2159 32.7 35.4 34.8 23.7 R-134a R-410A 75°F 2.3 5.3 6.7 8.3 23.3 32.5 58.7 125°F 1.9 4.4 5.7 7.0 19.6 27.2 49.5 R-404A/R-507 75°F 2.3 5.2 6.6 8.2 22.9 31.9 57.7 125°F 1.9 4.4 5.6 6.9 19.4 26.8 48.9 R-502 75°F 2.7 6.0 7.7 9.5 26.7 37.2 67.2 125°F 2.3 5.3 6.8 8.4 23.4 32.4 59.0 Accessories, Supplies & Commodities R-12 R-12 Tools & Instruments Connections Inlet/Outlet Refrigeration Description 3 Water Capacity Drops of Water 1.4 Flow Capacity Tons @ 1 psi ǻP (For kW, multiply tons by 3.5 ) Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 5 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-System Protectors ADK Core Style Liquid Line Filter Drier The ADK is a solid core liquid line Filter Drier ideal for use with CFC, HCFC, and HFC refrigerants. Features • Solid copper connections • High moisture and acid removal capacity • Corrosion resistant epoxy powder paint finish • Copeland® products approved for POE oils Specifications • Desiccant Blend: optimized for high water capacity and acid capacity • Filtration: 40 microns • Maximum working pressure: 680 psig • UL/CUL file number: SA 3124 Nomenclature example: ADK 083S ADK 08 3 S Series Unit Size (in cu. in.) Connection Size (in 1/8”) S = ODF connections (omit for SAE) Ordering Information PCN 059874 052451 023157 053172 060125 060126 060127 060128 060129 060130 060131 060132 060133 060134 059838 059820 059839 060795 059840 059841 059842 059843 060172 058507 060173 060176 060174 060177 060178 060179 060182 060183 060185 060184 060186 060187 060188 060190 060191 1 Connection Size 1/4 SAE 1/4 ODF 3/8 SAE 3/8 ODF 1/4 SAE 1/4 ODF 3/8 SAE 3/8 ODF 1/4 SAE 1/4 ODF 3/8 SAE 3/8 ODF 1/2 SAE 1/2 ODF 1/4 ODF 1/4 SAE 3/8 SAE 3/8 ODF 1/2 SAE 1/2 ODF 5/8 SAE 5/8 ODF 3/8 SAE 5/8 ODF 1/2 SAE 1/2 ODF 5/8 SAE 5/8 ODF 7/8 ODF 1-1/8 ODF 3/8 SAE 1/2 SAE 1/2 ODF 5/8 SAE 5/8 ODF 7/8 ODF 1-1/8 ODF 7/8 ODF 1-1/8 ODF A Dimensions (in) B D E 4.38 3.88 3.13 4.69 4.06 3.25 4.88 4.44 3.69 5.13 4.50 3.69 5.63 5.00 4.31 5.94 5.38 4.06 6.19 5.38 4.06 6.94 5.25 6.56 6.75 6.25 5.00 7.13 6.38 5.00 7.56 6.56 5.13 9.63 8.94 8.13 9.81 9.06 8.06 10.31 9.25 8.00 9.88 8.38 10.19 8.38 9.75 10.00 9.19 8.19 10.44 9.44 8.19 10.00 8.50 10.38 8.50 15.50 14.94 15.88 14.17 Does not include weld bead K-181 0.38 0.44 0.38 0.44 0.38 0.63 0.75 0.25 0.63 0.75 0.63 0.44 0.50 0.63 0.75 0.94 0.50 0.63 0.75 0.94 0.75 0.94 2.56 2.56 2.56 2.56 3.00 3.00 3.00 3.00 3.81 3.81 3.81 3.81 3.81 3.81 4.75 4.75 4.75 4.75 4.75 4.75 4.75 4.75 7.50 7.50 7.50 7.50 7.50 7.50 7.50 7.50 7.63 7.63 7.63 7.63 7.63 7.63 7.63 13.13 13.13 1.75 1.75 1.75 1.75 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 2.63 3.13 3.13 3.13 3.13 3.13 3.13 3.13 3.13 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 Weight (lbs) 0.50 0.50 0.50 0.50 1.00 1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25 1.25 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 4.75 4.75 4.75 4.75 4.75 4.75 4.75 7.75 7.75 Description ADK-032 ADK-032S ADK-033 ADK-033S ADK-052 ADK-052S ADK-053 ADK-053S ADK-082 ADK-082S ADK-083 ADK-083S ADK-084 ADK-084S ADK-162S ADK-162 ADK-163 ADK-163S ADK-164 ADK-164S ADK-165 ADK-165S ADK-303 ADK-303S ADK-304 ADK-304S ADK-305 ADK-305S ADK-307S ADK-309S ADK-413 ADK-414 ADK-414S ADK-415 ADK-415S ADK-417S ADK-419S ADK-757S ADK-759S Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 6 Capacity Tables 2 2.1 2.5 2.9 3.3 2.2 3.1 4.0 4.9 2.2 3.4 4.7 4.6 7.3 7.6 2.2 4.8 5.3 9.0 9.3 12.8 14.2 17.3 5.1 9.3 9.5 15.0 15.7 17.1 18.9 27.0 5.1 10.6 11.6 16.9 17.9 22.0 27.3 37.1 40.4 2.1 2.5 2.9 3.3 2.2 3.1 4.0 4.9 2.2 3.4 4.7 4.6 7.3 7.6 2.2 4.8 5.3 9.0 9.3 12.8 14.2 17.3 5.1 9.3 9.5 15.0 15.7 17.1 18.9 27.0 5.1 10.6 11.6 16.9 17.9 22.0 27.3 37.1 40.4 2.0 2.4 2.9 3.2 2.1 3.1 3.9 4.8 2.1 3.3 4.6 4.5 7.1 7.4 2.1 4.7 5.2 8.8 9.1 12.5 13.9 17.0 5.0 9.1 9.4 14.7 15.4 16.8 18.5 26.5 5.0 10.4 11.4 16.6 17.5 21.7 26.8 36.3 39.6 57 47 36 76 72 71 63 70 74 68 69 63 46 185 195 180 180 130 150 120 125 95 200 190 185 165 250 265 245 250 225 205 165 170 130 275 260 255 230 365 390 360 265 330 300 240 250 190 400 380 375 335 820 865 800 810 740 675 540 555 420 895 845 835 745 1100 1140 1010 945 740 780 580 1260 1156 1170 1020 1985 2100 1940 1956 1800 1635 1310 1350 1030 2170 2050 2025 1800 Electrical 1.9 2.3 2.7 3.0 2.0 2.9 3.7 4.5 2.0 3.1 4.3 4.2 6.7 7.0 2.0 4.4 4.9 8.3 8.6 11.8 13.1 16.0 4.7 8.6 8.8 13.8 14.5 15.8 17.4 24.9 4.7 9.8 10.7 15.6 16.5 20.3 25.2 34.2 37.3 R-410A Heating Components 1.6 1.9 2.2 2.5 1.6 2.4 3.0 3.7 1.6 2.5 3.5 3.4 5.5 5.7 1.6 3.6 4.0 6.8 7.1 9.7 10.7 13.1 3.9 7.1 7.2 11.3 11.9 13.0 14.3 20.4 3.9 8.0 8.8 12.8 13.5 16.6 20.7 28.0 30.6 125° 75°F F R-407C Indoor Air Quality 1/4 SAE 1/4 ODF 3/8 SAE 3/8 ODF 1/4 SAE 1/4 ODF 3/8 SAE 3/8 ODF 1/4 SAE 1/4 ODF 3/8 SAE 3/8 ODF 1/2 SAE 1/2 ODF 1/4 SAE 1/4 SAE 3/8 ODF 1/2 SAE 1/2 ODF 5/8 SAE 5/8 ODF 7/8 ODF 3/8 SAE 1/2 SAE 1/2 ODF 5/8 SAE 4/8 ODF 3/4 ODF 7/8 ODF 1 1/8 ODF 3/8 SAE 1/2 SAE 1/2 ODF 5/8 SAE 5/8 ODF 7/8 ODF 1 1/8 ODF 7/8 ODF 1 1/8 ODF 125°F 75°F RR-502 404A/507 125° 125° 125° 125° 125° 75°F 75°F 75°F 75°F F F F F F R-22 1120 1210 1 All ratings in accordance with ARI Standard 710-04. 86°F liquid refrigerant temperature 5°F saturated vapor temperature 3.1 lbs./min./ton for R-134a 2.9 lbs./min./ton for R-22 and R- 407C 4.0 lbs./min./ton for R-404A/507 and R-12 2.7 lbs./min./ton for R-410A 2 Water Capacities are based on: Equilibrium Point Dryness (EPD) of: 50 parts per million for R-134a, R404A/507, R-410A and R-407C 60 parts per million for R-22 15 parts per million for R-12 3 20 drops of water = 1 gram = 1 cc 4 For 2 PSI ǻP, Multiply values by 1.4 Liquid Refrigerant Holding Capacity-Ounces R-22 75°F 125°F 2.2 2.0 5.4 5.4 7.3 6.6 13.2 11.2 19.8 17.8 26.6 23.9 48.0 43.1 R-407C 75°F 125°F 2.1 1.9 5.2 5.0 7.0 6.2 12.6 10.4 18.9 16.6 25.4 22.3 45.8 40.2 R-410A R-404A/R-507 R-502 75°F 125°F 75°F 125°F 75°F 125°F 2.0 1.7 1.9 1.7 2.7 2.3 4.8 4.5 4.7 4.5 6.0 5.3 6.5 5.5 6.4 5.5 7.7 6.8 11.7 9.4 11.6 9.3 9.5 8.4 17.4 14.9 17.4 14.7 26.7 23.4 23.7 20.0 23.3 19.7 37.2 32.4 42.8 36.0 42.1 35.6 67.2 59.0 Tools & Instruments R-12 R-134a Unit Size 75°F 125°F 75°F 125°F 03 2.4 2.2 2.2 2.0 05 5.9 6.0 5.5 5.5 08 8.0 7.4 7.4 6.7 16 14.5 12.5 13.4 11.4 30 21.8 19.9 20.1 18.1 41 29.3 26.8 26.9 24.4 75 52.8 48.3 48.6 43.9 Thermostats ADK 032 ADK 032S ADK 033 ADK 033S ADK 052 ADK 052S ADK 053 ADK 53S ADK 082 ADK 082S ADK 083 ADK 083S ADK 084 ADK 084S ADK 162 ADK 163 ADK 163S ADK 164 ADK 164S ADK 165 ADK 165S ADK 167S ADK 303 ADK 304 ADK 304S ADK 305 ADK 305S ADK 306S ADK 307S ADK 309S ADK 413 ADK 414 ADK 414S ADK 415 ADK 415S ADK 417S ADK 419S ADK 757S ADK 759S R404A /507 1.4 1.7 2.0 2.2 1.4 2.1 2.7 3.3 1.4 2.2 3.1 3.0 4.9 5.1 1.4 3.2 3.6 6.0 6.2 8.6 9.5 11.8 3.4 6.2 6.4 10.0 10.5 11.5 12.6 18.0 3.4 7.1 7.8 11.3 12.0 14.7 18.3 24.8 27.0 R-134a Oils & Chemicals R-12 R-134a R-22 R-410A R-407C R-12 Accessories, Supplies & Commodities Connections K-182 Refrigeration Description 3 Water Capacity Drops of Water 1.4 Flow Capacity Tons @ 1 psi ǻP (For kW, multiply tons by 3.5 ) Motors EMERSON CLIMATE TECHNOLOGIES-System Protectors ADK Filter Driers Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 7 Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-System Protectors BFK Liquid Line Bi-Directional Filter Drier The BFK is a solid core, bi-directional, liquid line Filter Drier for heat pump applications for use with CFC, HCFC, and HFC refrigerants. Features • Available 5 to 30 cu. in. size • Internal check valves allow flow and filtration in either direction, eliminates need for external check valves • High moisture and acid removal capacity • Corrosion resistant epoxy powder paint finish • Copeland® brand products approved for POE oils Specifications • Desiccant Blend: optimized for high water capacity and acid capacity • Filtration: 40 microns • Maximum working pressure: 680 psig • UL/CUL file number: SA 3124 Nomenclature example: BFK 165S Heating Components BFK Series Indoor Air Quality Thermostats Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments 5 S Unit Size (in cu. in.) Connection Size (in 1/8”) S = ODF connections (omit for SAE) Ordering Information PCN Refrigeration 16 062300 062425 062254 062255 058584 058597 043321 043323 043325 043327 043728 043730 043330 043333 043335 043337 043732 043734 058589 063076 063077 063078 063079 063080 063081 063082 063083 063084 063451 Connection A Size 1/4 SAE 4.82 1/4 ODF 4.44 3/8 SAE 5.13 3/8 ODF 4.48 1/4 ODF 5.27 5/16 ODF 5.02 3/8 SAE 5.94 3/8 ODF 5.29 1/2 SAE 6.16 1/2 ODF 5.38 5/8 SAE 6.62 5/8 ODF 5.60 3/8 SAE 6.74 3/8 ODF 6.08 1/2 SAE 6.96 1/2 ODF 6.17 5/8 SAE 7.41 5/8 ODF 6.39 7/8 ODF 6.99 3/8 SAE 9.63 3/8 ODF 8.97 1/2 SAE 9.84 1/2 ODF 9.02 5/8 SAE 10.31 5/8 ODF 9.31 3/4 SAE 10.61 3/4 ODF 9.72 7/8 ODF 9.91 1 1/8 ODF 10.22 Dimensions (in) B C D 3.00 3.00 3.00 3.00 3.82 3.82 3.82 3.82 3.82 3.82 3.82 3.82 4.61 4.61 4.61 4.61 4.61 4.61 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 3.69 3.67 4.52 4.38 4.48 4.38 4.35 5.28 5.17 5.14 5.49 5.49 5.49 5.49 5.49 5.49 5.49 5.49 5.49 5.49 5.49 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 E 0.38 0.40 0.38 0.32 0.40 0.50 0.63 0.40 0.50 0.63 0.25 0.40 0.50 0.63 0.75 0.91 Weight (lbs) 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 3.75 3.75 3.75 3.75 3.75 3.75 3.75 3.75 3.75 Description BFK-052 BFK-052S BFK-053 BFK-053S BFK-082S BFK-0825S BFK-083 BFK-083S BFK-084 BFK-084S BFK085 BFK-085S BFK-163 BFK-163S BFK-164 BFK-164S BFK-165 BFK-165S BFK-167S BFK303 BFK-303S BFK-304 BFK-304S BFK-305 BFK-305S BFK-306 BFK-306S BFK-307S BFK-309S K-183 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 8 EMERSON CLIMATE TECHNOLOGIES-System Protectors BFK Liquid Line Bi-Directional Filter Drier 1 4 1.6 1.6 1.6 2.2 2.2 2.2 BFK-05 3 3/8 SAE 3.5 3.5 3.4 BFK-05 3S 3/8 ODF 4.0 4.0 3.9 BFK-08 3 3/8 SAE 4.5 4.5 4.4 BFK-08 3S 3/8 ODF 5.1 5.1 5.0 BFK-08 4 1/2 SAE 6.4 6.4 6.3 BFK-08 4S 1/2 ODF 6.7 6.7 6.6 BFK-08 5 5/8 SAE 7.2 7.2 7.0 BFK-08 5S 5/8 ODF 8.1 8.1 7.9 BFK-16 3 3/8 SAE 4.6 4.6 4.5 BFK-16 3S 3/8 ODF 5.2 5.2 5.1 BFK-16 4 1/2 SAE 7.7 7.7 7.6 BFK-16 4S 1/2 ODF 8.1 8.1 7.9 BFK-16 5 5/8 SAE 8.3 8.3 8.1 BFK-16 5S 5/8 ODF 8.7 8.7 8.5 BFK-30 3S 3/8 ODF 5.8 5.8 5.7 BFK-30 4 1/2 SAE 7.6 7.6 7.5 BFK-30 4S 1/2 ODF 9.7 9.7 9.5 BFK-30 5 5/8 SAE 10.3 10.3 10.1 BFK-30 5S 5/8 ODF 14.2 14.2 13.9 BFK-30 6S 3/4 ODF 16.0 16.0 15.7 BFK-30 7S BFK-30 9S 7/8 ODF 1 1/8 ODF 16.7 18.0 16.7 18.0 16.4 17.5 73 66 58 42 39 35 159 144 106 79 85 75 323 294 237 179 178 160 585 532 452 345 415 Motors 1/4 SAE 1/4 ODF R-407C R-410 75°F C 125°F A 75°F A 125°F Electrical BFK-05 2 BFK-05 2S R-22 75°F 125°F Heating Components R-407C 293 1 2 3 Water Capacities are based on: Equilibrium Point Dryness (EPD) of: 50 parts per million for R-134a, R404A/507, R-410A and R-407C 60 parts per million for R-22 15 parts per million for R-12 4 20 drops of water = 1 gram = 1 cc For 2 PSI ǻP, Multiply values by 1.4 Oils & Chemicals All ratings in accordance with ARI Standard 710-04. 86°F liquid refrigerant temperature 5°F saturated vapor temperature 3.1 lbs./min./ton for R-134a 2.9 lbs./min./ton for R-22 and R-407C 4.0 lbs./min./ton for R-404A/507 and R12 2.7 lbs./min./ton for R-410A Liquid Refrigerant Holding Capacity-Ounces R-22 Unit Size 05 75°F 4.6 R-407C 125°F 4.2 75°F 4.4 R-410A 125°F 3.9 75°F 4.1 Indoor Air Quality R-410A Thermostats R-22 3 125°F 3.5 7.7 6.9 7.3 6.4 6.9 5.8 16 14.2 12.7 13.5 11.8 12.6 10.6 30 21.0 18.7 20.0 17.4 19.6 16.5 Tools & Instruments 08 Accessories, Supplies & Commodities Connection Water Capacity Drops of Water K-184 Refrigeration Description 2 Flow Capacity Tons @ 1 psi ǻP , (For kW, multiply tons by 3.5 ) Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 9 EMERSON CLIMATE TECHNOLOGIES-System Protectors BOK-HH Liquid Line Burnout Filter Drier The BOK-HH is a liquid line Filter Drier for burnout clean-up and wax removal. The BOK-HH incorporates an activated carbon blended solid core for the effective clean-up of systems following a severe burnout. Features • Designed for maximum effectiveness in the clean-up of systems following a severe burnout • Corrosion resistant epoxy powder paint finish • Activated carbon blend for soluble contaminant and wax removal • Solid copper connections Specifications • Filtration: • Maximum working pressure: • UL/CUL fi le number: 40 microns 680 psig SA 3124 Nomenclature example: BOK 305S-HH BOK Series 30 5 S HH Unit Size (in cu. in.) Connection Size (in 1/8”) S = ODF connections (omit for SAE) Activated carbon Blend Ordering Information PCN 060223 064591 060224 057995 060240 064592 060241 060242 060228 060229 060230 060231 060232 060233 060234 060235 060236 060237 060238 060239 064593 1 Connection Size 1/4 SAE 1/4 ODF 3/8 SAE 3/8 ODF 1/4 SAE 1/4 ODF 3/8 SAE 3/8 ODF 1/2 SAE 1/2 ODF 5/8 SAE 5/8 ODF 3/8 SAE 1/2 SAE 1/2 ODF 5/8 SAE 5/8 ODF 1/2 SAE 5/8 SAE 7/8 ODF 5/8 ODF A B 5.63 5.00 5.94 5.38 6.44 6.03 6.75 6.13 6.94 6.19 7.44 6.38 9.63 9.88 9.13 10.31 9.31 10.00 9.25 10.44 9.25 -4.31 -4.06 -5.29 -5.25 -5.16 -5.13 --8.13 -8.06 -8.25 -8.25 Refrigeration Dimensions (in) D E -0.38 -0.63 -0.38 -0.94 -0.50 -0.63 --0.50 -0.63 -0.50 -0.50 Does not include weld bead Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-185 3.94 3.81 3.94 3.81 3.94 4.63 3.94 4.63 4.63 4.63 4.63 7.50 7.50 7.50 7.50 7.50 7.50 7.63 7.63 7.63 7.63 2.94 2.63 2.94 2.63 2.94 3.13 2.94 2.88 2.88 2.88 2.88 3.06 3.06 3.06 3.06 3.06 3.06 3.69 3.69 3.69 3.69 Weight (lbs) 1.00 1.00 1.00 1.00 1.00 1.00 1.00 2.00 2.00 2.00 2.00 3.75 3.75 3.75 3.75 3.75 3.75 4.75 4.75 4.75 4.75 Description BOK-082-HH BOK-082S BOK-083-HH BOK-083S BOK-162-HH BOK-162S-HH BOK-163-HH BOK-163S-HH BOK-164-HH BOK-164S-HH BOK-165-HH BOK-165S-HH BOK-303-HH BOK-304-HH BOK-304S-HH BOK-305-HH BOK-305S-HH BOK-414-HH BOK-415-HH BOK-417S-HH BOK-415S-HH Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 10 1/4 SAE 1/4 ODF 3/8 SAE 3/8 ODF 1/4 SAE 3/8 SAE 3/8 ODF 1/4 SAE 1/4 ODF 5/8 SAE 5/8 ODF 3/8 SAE 1/2 SAE 1/2 ODF 5/8 SAE 5/8 ODF 1/4 SAE 5/8 SAE 5/8 ODF 7/8 ODF 1.2 3.2 1.2 3.6 4.8 7.0 8.4 10.5 10.5 3.6 8.1 8.9 11.1 12.0 8.4 13.4 13.4 16.3 1.5 3.1 3.9 4.2 1.5 4.3 5.8 8.6 10.2 12.8 12.8 4.3 9.9 10.8 13.5 14.6 10.2 16.3 16.3 19.8 1.6 3.4 4.2 4.6 1.6 4.7 6.3 9.3 11.1 13.9 13.9 4.7 10.7 11.7 14.6 15.8 11.1 17.7 17.7 21.5 1 All ratings in accordance with ARI Standard 710-04. 86°F liquid refrigerant temperature 5°F saturated vapor temperature 3.1 lbs./min./ton for R-134a 2.9 lbs./min./ton for R-22 and R-407C 4.0 lbs./min./ton for R-404A/507 and R12 2.7 lbs./min./ton for R-410A 1.6 3.4 4.2 4.6 1.6 4.7 6.3 9.3 11.1 13.9 13.9 4.7 10.7 11.7 14.6 15.8 11.1 17.7 17.7 21.5 1.6 3.3 4.1 4.5 1.6 4.6 6.2 9.1 10.9 13.6 13.6 4.6 10.5 11.5 14.3 15.5 10.9 17.4 21.1 21.1 R-22 R-407C R-410A R-12 R-134a 180 180 - 118 118 - 88 71 78 59 74 45 66 38 93 71 109 79 209 143 171 141 153 117 91 56 77 41 182 141 135 100 552 367 300 245 267 204 234 146 160 94 318 247 342 249 623 410 427 344 379 282 256 155 220 125 454 342 380 274 2 Water Capacities are based on: Equilibrium Point Dryness (EPD) of: 50 parts per million for R-134a, R404A/507, R-410A and R-407C 60 parts per million for R-22 15 parts per million for R-12 R-22 R-502 75°F 125°F 75°F 125°F 75°F 125°F 75°F125°F 75°F 125°F 75°F 125°F 75°F 125°F 3 20 drops of water = 1 gram = 1 cc 4 For 2 PSI ǻP, Multiply values by 1.4 Liquid Refrigerant Holding Capacity - Ounces Unit Size R404A/507 Indoor Air Quality BOK 08 2-HH BOK 082S BOK 08 3-HH BOK 083S BOK 16 2-HH BOK 16 3-HH BOK 16 3S-HH BOK 16 4-HH BOK 16 4S-HH BOK 16 5-HH BOK 16 5S-HH BOK 30 3-HH BOK 30 4-HH BOK 30 4S-HH BOK 30 5-HH BOK 30 5S-HH BOK 41 4-HH BOK 41 5-HH BOK 41 5S-HH BOK 41 7S-HH R404A /507 1.1 2.2 2.8 3.0 1.1 3.1 4.2 6.2 7.4 9.3 9.3 3.1 7.2 7.8 9.8 10.6 7.4 11.8 14.4 14.4 R-134a Motors R-12 R-134a R-22 R-410A R-407C R-12 R-407C R-410A 125°F 6.6 75°F 6.7 125°F 6.0 75°F 6.6 125°F 5.9 75°F 6.3 125°F 5.5 75°F 5.9 16 13.9 12.7 12.8 11.5 12.6 11.3 12.0 10.5 30 21.8 19.9 20.1 18.1 19.8 17.8 18.9 16.6 41 29.3 26.8 26.9 24.4 26.6 23.9 25.4 22.3 R-404A/ R-507 125°F 4.9 75°F 5.8 11.2 9.4 11.7 14.9 23.7 20.0 R-502 125°F 4.9 75°F 6.7 125°F 5.9 11.1 9.3 12.9 11.3 17.4 14.7 20.2 17.7 23.3 19.7 27.2 23.8 Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals 08 75°F 7.3 Thermostats Connections K-186 Refrigeration Description Electrical 2 Water Capacity 3 Drops of Water 1.4 Flow Capacity Tons @ 1 psi ǻP (For kW, multiply tons by 3.5 ) Heating Components EMERSON CLIMATE TECHNOLOGIES-System Protectors BOK-HH Liquid Line Burnout Filter Drier Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 11 Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-System Protectors ALF Liquid Filter The ALF is a liquid line refrigerant filter for recovery, recycle and reclaim usage. The ALF is also used for protecting solenoid and expansion valve parts from debris. 03 Series Unit Size 3 S Connection Size Inlet (in 1/8”) Connection Style S = ODF Omit for SAE Ordering Information Heating Components PCN 058500 056618 057193 057193 1 Does not include weld bead Recovery, Recycle and Reclaim Refrigerant Flow Capacity (lbs./min. liquid) R-134A R-22/R-410A R-404A/R-507 7.6 8.0 8.0 Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality 057140 056645 064777 Dimensions (in) Connection Size A Inlet/Outlet 1/4 SAE 2.56 1.63 1/4 ODF 2.56 1.63 1/4 SAE Male In 2.56 1.63 1/4 SAE Female 2.56 1.63 Out 3/8 ODF 2.56 1.63 1/2 ODF 2.56 1.63 1/4 SAE 3.00 2.63 Tools & Instruments Refrigeration 40 microns 680 psig SA 3124 Nomenclature example: ALF 033S ALF Electrical Specifications • Filtration: • Maximum working pressure: • UL/CUL file number: Features • Filtering media that maximizes removal of finer particles • Corrosion resistant epoxy powder paint finish K-187 C Description 4.38 3.88 4.00 4.00 ALF-032 ALF-032S ALF-032MF ALF-032MF 4.00 4.13 4.88 ALF-033S ALF-034S ALF-052 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 12 EMERSON CLIMATE TECHNOLOGIES-System Protectors Spun Copper Liquid Line Filter Drier The CU series is a high capacity spun copper solid core Filter Drier ideal for superior corrosion resistance in ocean going vessels and coastal applications. Features • All copper construction for extreme corrosion resistance • 100% molecular sieve solid core drier • For use with CFC, HCFC and HFC refrigerants S Series Unit Size Connection Size (in 1/8”) ODF Specifications • Maximum working pressure: • Filtration: • UL/CUL file number: 500 psig 40 microns SA 7175 Ordering Information and Capacity Tables 1 R-12 R-134a 125°F 75°F 87 93 87 93 101 108 101 108 191 205 191 205 191 205 257 277 257 277 257 277 All ratings in accordance with ARI Standard 710-04. 86°F liquid refrigerant tem perature 5°F saturated vapor temperature 3.1 lbs./min./ton for R-134a 2.9 lbs./min./ton for R-22 and R-407C 4.0 lbs./min./ton for R-404A/507 and R-12 2.7 lbs./min./ton for R-410A R-134a 125°F 87 87 101 101 191 191 191 257 257 257 R-22 R-22 R-407C R-407C R-404A/R-5 R-404A/R-5 75°F 125°F 75°F 125°F 07 75°F 07 125°F 87 81 72 57 96 93 87 81 72 57 96 93 101 93 82 63 112 108 101 93 82 63 112 108 191 177 156 122 212 205 191 177 156 122 212 205 191 177 156 122 212 205 257 237 207 158 287 277 257 237 207 158 287 277 257 237 207 158 287 277 2 Water Capacities are based on: Equilibrium Point Dryness (EPD) of: 50 parts per million for R-134a, R404-A/507, R-410A and R-407C 60 parts per million for R-22 15 parts per million for R-12 3 4 R-502 75°F 90 90 104 104 198 198 198 267 267 267 R-502 125°F 81 81 93 93 177 177 177 237 237 237 Description CU 03 2 S CU 03 3 S CU 05 2 S CU 05 3 S CU 08 2 S CU 08 3 S CU 08 4 S CU 16 3 S CU 16 4 S CU 16 5 S 20 drops of water = 1 gram = 1 cc For 2 PSI ǻP, Multiply values by 1.4 Thermostats PCN Connection R-12 R-134a R-22 R-407CR-404A/ R-12 R-507 75°F 064388 1/4 ODF 1.4 1.7 1.8 1.8 1.2 96 064389 3/8 ODF 2.1 2.6 2.8 2.7 1.9 96 064390 1/4 ODF 1.5 1.8 2.0 2.0 1.3 112 064391 3/8 ODF 2.1 2.6 2.8 2.7 1.9 112 064392 1/4 ODF 1.6 1.9 2.1 2.1 1.4 212 064393 3/8 ODF 2.9 3.5 3.8 3.7 2.5 212 064394 1/2 ODF 3.5 4.2 4.6 4.5 3.1 212 064395 3/8 ODF 3.3 4.0 4.3 4.2 2.9 287 064396 1/2 ODF 3.9 4.7 5.1 5.0 3.4 287 064397 5/8 ODF 4.4 5.4 5.8 5.7 3.9 287 Electrical 3 Heating Components 16 Indoor Air Quality CU Motors Nomenclature example: CU 163S Compressors, Chillers, Condensers Refrigeration Diameter 1.63 1.63 2.00 2.00 Description CU 03 CU 05 CU 08 CU 16 K-188 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Overall Length (A) Lay-In Dimension (B) 3.94 3.25 5.19 4.50 6.06 5.38 6.63 6.00 Oils & Chemicals Dimensional Data (in) Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 13 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-System Protectors STAS Steel Liquid and Suction Filter Drier The STAS is a replaceable core Filter Drier for CFC, HCFC, and HFC refrigerants for use in large commercial air conditioning and refrigerant system s. Features • Slotted cover/unique internal hardware for hassle-free installation • Full flow fittings for low pressure drop • Corrosion resistant epoxy powder paint finish • Sturdy steel shells for long life • Solid copper connections • 100 mesh outlet screen Nomenclature example: STAS 489T STAS Steel Take-Apart Series 48 9 Unit Size Connection Size (in cu. in.) (in 1/8”) T System Service T = Liquid Line Service SV = Suction Line Service Specifications • Filtration (with core): • Maximum working pressure: • UL/CUL file number: 40 microns SV version = 500 psig T version = 680 psig SA7175 STAS M odels are shipped without filter or filter drier cores. See filter or filter drier cores for availability. Ordering Information PCN 053001 053003 053005 053007 053043 053044 053045 053375 053938 053010 053012 053014 053017 053018 053047 053048 059739 053020 053022 053024 053025 053028 053030 053031 056213 Connection Size *5/8 ODF *7/8 ODF *1 1/8 ODF *1 3/8 ODF 1 5/8 ODF 2 1/8 ODF 2 5/8 ODF 1 5/8 ODF 1 3/8 ODF *7/8 ODF *1 1/8 ODF *1 3/8 ODF *1 5/8 ODF *2 1/8 ODF 2 1/8 ODF 2 5/8 ODF 3 1/8 ODF 1 1/8 ODF 1 3/8 ODF 1 5/8 ODF 2 1/8 ODF 1 3/8 ODF 1 5/8 ODF 2 1/8 ODF 7/8 X 5/8 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 4 4 4 4 Desiccant Volume (Cu. In.) 48 48 48 48 48 48 48 48 48 96 96 96 96 96 96 96 96 144 144 144 144 192 192 192 192 A 9.94 9.69 9.75 9.84 9.88 10.06 10.44 9.88 9.84 15.19 15.22 15.31 15.38 15.56 15.56 15.94 16.54 21.25 21.34 21.38 21.56 26.91 26.94 27.13 26.50 Dimensions (in) B C D 6.00 6.25 6.31 6.44 6.02 6.56 7.03 6.50 6.44 11.72 11.78 11.91 11.97 12.03 12.03 12.50 12.63 17.38 17.53 17.59 17.63 23.00 23.17 23.13 6.00 3.78 3.75 3.84 3.97 4.03 4.56 4.75 4.03 3.97 3.75 3.84 3.97 4.03 4.56 4.56 4.75 5.44 3.84 3.97 4.03 4.56 3.97 4.03 4.56 3.69 0.63 0.78 0.94 0.94 1.13 1.34 1.04 1.13 0.94 0.78 0.94 1.03 1.13 1.34 1.34 1.50 1.66 0.94 1.03 1.13 1.34 1.03 1.13 1.34 0.78/0.63 Description STAS-485T STAS-487T STAS-489T STAS-4811T STAS-4813S-V* STAS-4817S-V* STAS-4821S-V* STAS-4813T STAS-4811SV STAS-967T STAS-969T STAS-9611T STAS-9613T STAS-9617T STAS-9617S-V* STAS-9621S-V* STAS-9625 SV STAS-1449T STAS-14411T STAS-14413T STAS-14417T STAS-19211T STAS-19213T STAS-19217T STAS-1927/5T * “SV” style include stainless steel bolts and access v alve. NOTE: “T” style can be used for suction by removing pipe plug and installing X-11562-2. K-189 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 14 5/8 ODF 7/8 ODF 1 1/8 ODF 1 3/8 ODF 1 5/8 ODF 7/8 ODF 1 1/8 ODF 1 3/8 ODF 1 5/8 ODF 1 1/8 ODF 1 3/8 ODF 1 5/8 ODF 2 1/8 ODF 1 3/8 ODF 1 5/8 ODF 2 1/8 ODF 1 Indoor Air Quality All ratings in accordance with ARI Standard 710-04. 86oF liquid refrigerant tem perature • 5°F saturated vapor tem perature • 3.1 lbs./min./ton for R-134a • 2.9 lbs./min./ton for R-22 and R-407C • 4.0 lbs./min./ton for R-404A/507 and R-12 2 For 2 PSI ǻP, M ultiply values by 1.4 3 For kW, m ultiply by 3.5 Thermostats Replacement Parts For STAS PCN Flange Cover Assembly Description All STAS Driers - Include Flange Cover, Compression Spring, Pipe Plug, and Grade 5 Bolts X12176-3 Oils & Chemicals Flange Cover Assembly 054046 PCN Shell Strainer Assembly Description STAS-48 STAS-96 STAS-144 STAS-192 X27458-1 X27458-2 X27458-3 X27458-4 Accessories, Supplies & Commodities Shell Strainer Assembly 060274 060275 060276 060277 Miscellaneous Parts PCN Miscellaneous Parts Description 053121 Cover Bolts (Stainless Steel – suction line service) Access Valve (V Option) Cover Gasket (Includes felt set) Handle Inlet Retainer Spring Felt Set (1 Core Set) Gasket Set Mounting Bracket X25787-7 X11562-2 X11983-1 26446-1 26477-1 26439-1 27394-1 X11983-2 X28747-1 Tools & Instruments 037409 027453 053812 053813 060258 060278 027454 061715 Motors STAS-485T STAS-487T STAS-489T STAS-4811T STAS-4813T STAS-967T STAS-969T STAS-9611T STAS-9613T STAS-1449T STAS-14411T STAS-14413T STAS-14417T STAS-19211T STAS-19213T STAS-19217T Liquid Flow Capacity Tons @ 1 psi ǻP 1, 2, 3 RR- R-404A RRR-22 R-12 134a 407C /507 502 410A 16 21 22 21 15 14 22 29 38 41 39 27 25 41 Mounting Backet for STAS 48* 42 53 58 56 38 36 58 48 75 81 78 53 41 80 *More than one m ounting bracket may be required 67 81 89 85 58 58 87 for shell sizes 96 and above. 33 42 45 43 30 27 45 Exploded View 49 65 71 68 47 42 71 62 80 87 83 57 54 86 67 92 100 95 65 58 99 48 66 72 69 47 41 71 69 92 100 96 65 60 99 77 93 101 97 66 66 100 88 110 120 115 78 76 119 75 94 102 98 67 64 101 81 103 113 108 74 69 111 91 113 123 117 80 78 121 Electrical Connections K-190 Refrigeration Description Heating Components EMERSON CLIMATE TECHNOLOGIES-System Protectors STAS Steel Liquid and Suction Filter Drier Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 15 EMERSON CLIMATE TECHNOLOGIES-System Protectors ADKS Liquid and Suction Line Filter Drier The ADKS is a replaceable core Filter Drier for use with CFC, HCFC, and HFC refrigerants in very large com mercial air conditioning and refrigerant systems. Features • Full flow fittings for low pressure drop • Corrosion resistant epoxy powder paint finish • Sturdy steel shells for long life durability Nomenclature example: ADKS 30013T Specifications ADKS 300 13 T • Filtration (with core): 40 microns • Maxim um working pressure: 500 psig* System Unit Size Connection Size T = Tap Access Protector • UL/CUL file num ber: SA 3124 (in cu. in.) (in 1/8”) Connection Series • Bolt Torque: 35 ft-lbs *Note: Not suitable for R-410A applications above 500 psig Dimensional Data Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Ordering Information PCN Connection Size 026570 037978 032105 037570 1 5/8 ODF 2 1/8 ODF 2 1/8 ODF 2 5/8 ODF 3 3 4 4 A B C 25.50 25.59 32.09 33.13 19.47 19.00 25.50 26.72 4.19 3.78 3.78 4.81 Dimensions (in) D E 1.13 1.69 1.66 1.47 23.19 23.19 29.97 29.97 F* G H** Weight (lbs) Description 6.00 6.00 6.00 6.00 7.56 7.56 7.56 7.56 22.25 22.25 28.88 28.88 39.00 39.00 46.00 46.00 ADKS-30013T ADKS-30017T ADKS-40017T ADKS-40021T * Does not include weld bead ** “H” Dim ension is the clearance required to change the internal hardware assembly T = 1/4” FPT access connection ADKS Models are shipped without filter cores or filter drier cores. See filter or filter drier cores for availability. K-191 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 16 Liquid Line for Replaceable Block Type ADKS Filter Driers 1 2 ADKS ADKS ADKS ADKS 30013T 30017T 40017T 40021T 1 5/8 ODF 2 1/8 ODF 2 1/8 ODF 2 5/8 ODF Flow Capacity In Tons @ 1 psi Δ P , R-12 R-134a R-22/R-410A R-407C 83 121 128 136 102 148 157 166 110 160 170 180 108 157 167 177 R-404/507 R-502 73 107 114 120 49 59 63 71 1 All ratings in accordance with ARI Standard 710-04. 86°F liquid refrigerant temperature o 5 F saturated vapor tem perature 3.1 lbs./min./ton for R-134a 2.9 lbs./min./ton for R-22 and R-407C 4.0 lbs./min./ton for R-404A/507 and R-12 2 For 2 PSI ǻP. Multiply values by 1.4 Replacement Parts PCN Flange Cover 027467 ADKS-300, ADKS-400 Description X12176-2 PCN Shell Strainer Assembly Description 039967 038315 ADKS-300 ADKS-400 X10574-5 X10574-6 Heating Components Description Connection Motors Capacity Tables (in Tons) Electrical EMERSON CLIMATE TECHNOLOGIES-System Protectors ADKS Liquid and Suction Line Filter Drier Compressors, Chillers, Condensers Refrigeration K-192 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Exploded View Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 17 Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-System Protectors Filter Drier Cores and Filters Universal replacement cores and filter cores for use in our ADKS and STAS shells and sim ilar competitive Take-Apart type Filter Drier shells. May not be used for BTAS. Features • Water capacities to suit specific system conditions • Exceptional acid capacities for norm al system protection, or to effectively clean-up f ollowing a compressor burnout • Activated carbon blend f or soluble contaminant and wax removal (W-HH Series) Nomenclature example: H 48 Specifications H 48 48 • Interchangeable with competitive products Heating Components Electrical Series Cubic Inch Ordering Information and Capacity Tables PCN Recommended Refrigerant Type 059541 059542 CFC, HCFC CFC, HCFC 061235 CFC, HCFC, HFC 061617 CFC, HCFC, HFC 089338 CFC, HCFC 043582 CFC, HCFC, HFC 089559 CFC, HCFC, HFC 047664 CFC, HCFC, HFC 095762 CFC, HCFC, HFC 061237 CFC, HCFC 061238 CFC, HCFC 1 Function R-12 R-12 R-134a R-134a R-22 R-22 R-407C R-407C R-404A/ R-404A/ R-410A R-410A R-502 R-502 75°F 125°F 75°F 125°F 75°F 125°F 75°F 125°F R-507 R-507 75°F 125°F 75°F 125°F 75°F 125°F High Acid Removal 810 453 415 340 363 254 225 95 457 343 210 86 388 225 High Acid and Water 1020 688 676 538 597 436 445 285 721 535 380 226 643 475 Removal Burnout Cleanup 772 488 387 294 335 226 290 165 417 289 249 130 444 306 1579 1319 1272 1168 1181 1072 1033 786 1319 1241 976 707 1332 1150 Universal Replacement 418 1199 839 672 364 1109 758 High Acid and Water 1958 1225 1112 834 962 673 726 Removal 3204 2740 2769 2550 2574 2345 2182 1682 2868 2710 2787 2437 Universal Replacement Burnout Cleanup 1668 1054 1077 812 938 621 629 363 1162 792 573 307 960 663 Filter (Suction Only) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Filter (Suction Only) N/A N/A N/A Reverse Flow Filter (Suction Only)) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Removal 1020 688 1096 920 1037 790 750 530 1090 940 650 420 643 475 Cleanup 772 488 583 493 532 380 380 230 600 482 350 197 444 306 Water Capacities are based on: Equilibrium Point Dryness (EPD) of: 50 parts per million for R-134a, R404-A/R-410A and R-407C 60 parts per million for R-22 15 parts per million for R-12 2 3 Dimensional Data Tools & Instruments Refrigeration Filter Drier Block Size 42 48 100 Dimensions A B C 6.00 1.58 3.12 5.50 1.77 3.72 6.50 2.06 4.81 Weight (lbs) 1.00 1.50 4.00 D-48 H-48 W-48-HH UK-48 H-100 UK-100 W-100-HH F-48 F-48R F-100 RH-48 RW-48 20 drops of water = 1 gram = 1 cc D-42, H-42 and W-42 include one neoprene com posite lid Gasket and one core gasket. All other cores include a universal neoprene composite gasket kit which includes 2 sizes of replacement lid gaskets, and gaskets f or the top and bottom of the core or filter. Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality 062424 CFC, HCFC, HFC NOTE: Filter Drier cores are suitable for use with R-11 AND R-123 but filters are NOT. Catalog Number F-48/F-48R F-100 K-193 Dimensions A B C 5.50 2.81 3.88 6.50 3.75 4.81 Weight (lbs) 0.75 1.50 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 18 EMERSON CLIMATE TECHNOLOGIES-System Protectors BTAS Brass Take-Apart Suction Line Filter Drier Nomenclature example: BTAS 311SV BTAS Brass Take-Apart Series 3 11 Connection Size (in 1/8”) Unit Size Specifications • Filtration: • Maximum working pressure: • UL/CUL f ile num ber: SV Suction Line Service Motors The BTAS is a suction line, replaceable core Filter Drier for suction line services ideal for comm ercial ref rigeration applications. Features • Full flow fittings for low pressure drop • Corrosion resistant brass body with stainless steel bolts • Special cartridge design exclusive to brass shell Compressors, Chillers, Condensers Refrigeration 40 microns 400 psig SA 3124 Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Dimensional Data Nominal Shell Size (in) A B Dimensions (in) C 049462 7/8 ODF 2 9.75 6.57 2.19 049465 1 1/8 ODF 3 10.31 6.81 3.31 049466 1 3/8 ODF 3 11.06 6.94 3.44 049467 1 5/8 ODF 3 11.25 7.13 3.63 049468 2 1/8 ODF 3 11.50 7.38 3.88 064169 1 3/8 ODF 4 11.41 7.81 4.13 049470 1 5/8 ODF 4 12.03 7.81 4.13 049471 2 1/8 ODF 4 12.28 8.06 4.13 049472 2 5/8 ODF 4 12.41 8.19 4.94 049473 2 1/8 ODF 5 13.44 8.41 4.19 049474 2 5/8 ODF 5 13.56 8.47 4.94 049475 3 1/8 ODF 5 13.25 8.16 4.63 BTAS models are shipped without filter cartridge or Filter Drier cartridge. D E Weight (lbs) Description 3.75 4.63 4.63 4.63 4.63 5.75 5.75 5.75 5.75 7.09 7.09 7.09 0.75 0.91 0.97 1.09 1.34 0.78 1.09 1.34 1.47 1.34 1.47 1.66 6.75 10.25 10.50 11.00 11.20 16.20 16.75 17.20 18.00 28.75 29.00 29.25 BTAS-27 S-V BTAS-39 S-V BTAS-311 S-V BTAS-313 S-V BTAS-317 S-V BTAS-411 S-V BTAS-413 S-V BTAS-417 S-V BTAS-421 S-V BTAS-517 S-V BTAS-521 S-V BTAS-525 S-V Type A-F Replaceable Filter Cartridges PCN Filter Core For Shell No. Core O.D. Core Length Filter Area (Sq. In.) Weight (lbs) 049479 049480 049481 049482 A2F A3F A4F A5F BTAS-2 BTAS-3 BTAS-4 BTAS-5 1 29/32 2 3/4 3 3/4 4 5/16 6 3/8 6 7/8 7 1/2 8 1/2 66 115 189 270 0.33 0.50 0.88 1.00 K-194 Tools & Instruments Connection Size Refrigeration PCN Accessories, Supplies & Commodities Ordering Information Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 19 EMERSON CLIMATE TECHNOLOGIES-System Protectors BTAS Brass Take-Apart Suction Line Filter Drier Type A-F-D Replaceable Filter Drier Cartridges PCN Filter Drier Cartridge For Shell No. Cartridge O.D. Cartridge Length Desiccant Volume (Cu. In.) Weight (lbs) 049483 049484 049485 049486 A2F-D A3F-D A4F-D A5F-D BTAS-2 BTAS-3 BTAS-4 BTAS-5 1 29/32 2 3/4 3 3/4 4 5/16 6 3/8 6 7/8 7 1/2 8 1/2 4.2 13.3 26.0 36.5 0.50 0.88 1.20 1.20 Replacement Parts* PCN Misc. Parts Description 037409 065970 065971 065972 065973 Access Valve BTAS 2 Repair Kit BTAS 3 Repair Kit BTAS 4 Repair Kit BTAS 5 Repair Kit X11562-2 KD-30519-2 KD-30519-3 KD-30519-4 KD-30519-5 * Repair kits contain cover bolts, cover, spring and seal ring. Exploded View BTAS models are shipped without filter cartridge or Filter Drier cartridge. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-195 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 20 EMERSON CLIMATE TECHNOLOGIES-System Protectors ASD Premium Suction Line Filter Drier The ASD is a prem ium suction line Filter Drier for use with CFC, HCFC and HFC refrigerants. The ASD is optimized for high m oisture, acid, and solid contaminant remov al. 35 Series Unit Size (in cu. in.) S Connections S = ODF F = SAE 5 Connection Size (in 1/8”) VV Dual Access Valves 40 microns 500 psig SA 3124 Ordering Information PCN Connection Size A B Dimensions (in) C D E Weight (lbs) Description 056352 049168 049169 049170 049171 049172 049173 049174 049175 049176 3/8 SAE 3/8 ODF 1/2 ODF 5/8 SAE 5/8 ODF 3/4 ODF 7/8 ODF 1 1/8 ODF 1 3/8 ODF 1 5/8 ODF 5.59 5.59 5.69 7.56 6.22 7.75 7.94 8.84 12.25 12.16 -4.72 4.69 -5.28 6.50 6.44 7.03 10.31 9.91 0.44 0.44 0.50 -0.63 0.63 0.75 0.91 0.97 1.13 4.13 4.13 4.13 4.75 4.75 5.56 5.56 6.13 8.25 8.25 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 2.00 2.00 2.00 2.50 2.50 3.00 3.00 3.50 5.00 5.00 ASD 28F3 ASD 28S3-W ASD 28S4-W ASD 35F5-W ASD 35S5-W ASD 45S6-W ASD 45S7-W ASD 50S9-W ASD 75S11-W ASD 75S13-W Heating Components ASD Indoor Air Quality Specifications • Filtration: • Maximum working pressure: • UL/CUL f ile num ber: Nomenclature example: ASD 35S5VV Electrical Motors Features • Outstanding filtration for ultimate compressor protection • Dual access v alves for easy pressure readings • Solid copper connections • Corrosion resistant epoxy powder paint finish Compressors, Chillers, Condensers Refrigeration K-196 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Dimensional Data Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 21 EMERSON CLIMATE TECHNOLOGIES-System Protectors SFD Suction Line Filter Drier The SFD is a standard suction line Filter Drier for use after a burnout or when major work has been perf ormed. It is f or use with CFC, HCFC and HFC refrigerants. Features • Solid copper connections • Dual access v alves for easy pressure readings • Corrosion resistant epoxy powder paint finish Nomenclature exam ple: SFD 13S5-VV SFD 13 Series Unit Size (in cu. in.) S Connections S = ODF F = SAE 5 Connection Size (in 1/8”) VV Dual Access Valves Specifications • Filtration: • Maximum working pressure: • UL/CUL file number: PCN Connection Size A B 064042 064044 064043 064045 064046 064047 060244 060245 060246 060247 060248 060249 060250 060262 056505 060251 060252 060253 060254 3/8 SAE 3/8 ODF 1/2 SAE 1/2 ODF 5/8 ODF 3/4 ODF 3/8 SAE 3/8 ODF 1/2 ODF 1/2 SAE 5/8 SAE 5/8 ODF 3/4 ODF 7/8 ODF 3/4 ODF 7/8 ODF 1 1/8 ODF 1 3/8 ODF 1 5/8 ODF 5.31 3.94 3.91 4.31 3.97 3.94 3.91 4.00 4.25 5.75 6.00 5.81 10.31 9.91 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 3.38 5.13 5.13 5.13 12.16 12.16 Dimensions (in) C D 5.50 6.19 5.75 5.00 5.16 5.56 5.50 4.84 5.75 4.94 6.13 5.16 5.25 5.75 7.00 7.50 7.63 12.25 12.16 Dimensional Data Accessories, Supplies & Commodities Tools & Instruments Refrigeration 40 m icrons 500 psig SA 3124 Ordering Information Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-197 3.13 3.13 3.13 3.13 3.13 3.13 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 3.69 Weight (lbs) Description 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 3.00 3.00 3.00 4.50 4.50 SFD 08F3-W SFD 08S3-W SFD 08F4-W SFD 08S4-W SFD 08S5-W SFD 08S6-W SFD 13F3-W SFD 13S3-W SFD 13S4-W SFD 13F4-W SFD 13F5-W SFD 13S5-W SFD 13S6-W SFD 13S7-W SFD 27S6-W SFD 27S7-W SFD 27S9-W SFD 54S11-W SFD 54S13-W Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 22 EMERSON CLIMATE TECHNOLOGIES-System Protectors CSFD Compact Suction Line Filter Drier The CSFD has a compact solid desiccant core perfect for short lay-in applications. The CSFD is used for m oisture, acid and solid contaminant removal. It is for use with CFC, HCFC and HFC refrigerants. 14 Series Unit Size S Connections S = ODF 4 Connection Size (in 1/8”) Specifications • Filtration: • Maximum working pressure: • UL/CUL file number: VV Dual Access Valves 40 m icrons 500 psig** SA 3124 Ordering Information PCN Connection Size A Dimensions (in) B C Description 062231 062232 062233 062234 062235 1/2 ODF 5/8 ODF 3/4 ODF 7/8 ODF 1 1/8 ODF 4.25 4.50 4.38 4.56 4.88 2.75 2.75 2.75 2.75 2.75 4.63 4.63 4.63 4.63 4.63 CSFD-14S4-W CSFD-14S5-W CSFD-14S6-W CSFD-14S7-W CSFD-14S9-W** Electrical CSFD Heating Components Nomenclature exam ple: CSFD 14S4-VV Motors Features • Dual access valves for easy pressure readings • High acid rem oval capacity • Solid copper fittings for easiest brazing • Corrosion resistant epoxy powder paint finish Compressors, Chillers, Condensers Refrigeration ** 400 psig Maximum Working Pressure K-198 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Dimensional Data Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 23 EMERSON CLIMATE TECHNOLOGIES-System Protectors ASK-HH Suction Line Filter Drier The ASK utilizes a solid core with an activated carbon blend to maximize acid, moisture and wax removal. It is for use with CFC, HCFC and HFC refrigerants. Features • Dual access valves for easy pressure readings • Corrosion resistant epoxy powder paint finish • Activated carbon blend for soluble contaminant and wax • Solid copper connections Specifications • Filtration: • Maximum working pressure: • UL/CUL file number: 40 microns 500 psig SA 3124 Nomenclature example: ASK 165S-VV-HH ASK Series 16 Unit Size (in cu. in.) 5 Connection Size (in 1/8”) S VV Connection Dual Access S = ODF Valves HH Charcoal Blend Ordering Information PCN Connection Size A B Dimensions (in) C D Weight (lbs) Description 056508 056509 056510 056511 056512 056513 5/8 ODF 3/4 ODF 7/8 ODF 3/4 ODF 7/8 ODF 1 1/8 ODF 6.38 6.75 6.94 9.69 9.88 10.19 5.13 5.50 5.26 8.56 8.38 8.38 0.63 0.38 0.75 0.63 0.75 0.94 4.63 4.63 4.63 7.50 7.50 7.50 2.00 2.00 2.00 3.75 3.75 3.75 ASK 165S-W-HH ASK 166S-W-HH ASK 167S-W-HH ASK 306S-W-HH ASK 307S-W-HH ASK 309S-W-HH * Dimension does not include weld bead Dimensional Data Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-199 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 24 5 VV Connection Size Dual Access (in 1/8”) Valves Specifications • Filtration: 40 microns • Maximum working pressure: 500 psig • UL/CUL file number: SA 3124 Ordering Information PCN Connection Size A B Dimensions (in) C D E* Weight (lbs) Description 062961 062962 062963 062964 049177 049178 049179 049180 059999 049181 049182 049183 063113 063115 049184 049185 1/2 ODF 5/8 ODF 7/8 ODF 1 1/8 ODF 3/8 ODF 1/2 ODF 5/8 SAE 5/8 ODF 3/8 SAE 3/4 ODF 7/8 ODF 1 1/8 ODF 2 1/8 ODF 2 5/8 ODF 1 3/8 ODF 1 5/8 ODF 4.38 4.63 6.50 7.41 5.59 5.69 7.56 6.53 7.69 7.75 7.94 8.84 11.75 13.00 12.25 12.16 3.38 3.38 5.00 5.61 4.72 4.69 – 5.28 – 6.50 6.44 7.03 9.06 10.00 10.31 9.91 0.50 0.63 0.75 0.91 0.44 0.50 – 0.63 – 0.63 0.75 0.91 1.31 1.50 0.97 1.13 2.88 2.88 4.13 4.13 4.13 4.13 4.75 4.75 5.56 5.56 5.56 6.13 7.63 7.88 8.25 8.25 2.63 2.63 3.06 3.06 3.69 3.69 3.69 3.69 3.69 3.69 3.69 5.00 5.00 5.00 5.00 5.00 1.50 1.50 2.00 2.00 2.00 2.00 2.50 2.50 3.00 3.00 3.00 3.50 3.50 3.50 5.00 5.00 ASF 11S4 ASF 11S5 ASF 28S7 ASF 28S7-VV ASF 28S3-VV ASF 28S4-VV ASF 35FS-VV ASF 35S5-VV ASF 45F3-VV ASF 45S6-VV ASF 45S7-VV ASF 50S9-VV ASF 64S17-V ASF 64S21-V ASF 75S11-VV ASF 75S13-VV * Dimension does not include weld bead Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Dimensional Data Motors Series S Connections S = ODF F = SAE K-200 Refrigeration 35 Unit Size (in cu. in.) Electrical Nomenclature example: ASF 35S5-VV ASF Heating Components Features • Dual access valves for easy pressure readings • Solid copper connections • Corrosion resistant epoxy powder paint finish Indoor Air Quality The ASF is a specifically designed filter to protect the compressor from dirt and all solid contaminants. Thermostats EMERSON CLIMATE TECHNOLOGIES-System Protectors ASF Suction Line Filter Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 25 Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-System Protectors APD Pulsation Dampener/Muffler The APD series is designed to reduce noise and vibration on the compressor discharge lines. Features • Compact size • Full flow fittings • Solid copper connections • Corrosion resistant epoxy powder paint finish • Rugged steel shells for vibration resistance • Shock resistant steel shell construction APD 05 Pulsation Cubic Dampener Inches 3 S Fitting Size in 1/8” ODF Fittings Indoor Air Quality Fitting Size 1/4 3/8 1/2 5/8 7/8 1 1/8 Ordering Information PCN A B 061862 049651 059144 049623 060119 056989 6.00 4.56 6.25 6.25 6.56 10.25 5.00 3.56 5.38 5.38 5.31 8.44 Dimensions (in) C D 4.47 3.00 4.75 4.75 4.75 7.50 3.02 2.63 2.63 2.63 2.63 3.13 Dimensional Data Accessories, Supplies & Commodities Tools & Instruments Refrigeration 680 psig -40°F to +250°F SA 5760 Tons 1-5 5-10 10-20 15-25 25-35 35+ Oils & Chemicals Thermostats Specifications • Maximum working pressure: • Operating Range: • UL/CUL f ile number: B With Baffles (omit for standard) Flow Capacity Heating Components Electrical Nomenclature exam ple: APD 053 SB K-201 E F Description 0.50 0.50 0.38 0.38 0.63 1.13 0.50 0.50 0.38 0.38 0.63 0.88 APD 1R APD 054 S-B APD 163 S APD 163 S-B APD 165 S-B APD 309 S Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 26 EMERSON CLIMATE TECHNOLOGIES-System Protectors HMI-Hermetic Moisture Indicators Ordering Information PCN Series Connection Size Description 065391 065392 065393 065394 065395 065405 065406 065407 065408 065409 065410 065411 065396 065397 065398 065622 065814 065979 065980 Male Flare x Male Flare Male Flare x Male Flare Male Flare x Male Flare Male Flare x Male Flare Male Flare x Male Flare Sweat x Sweat (ODF) Sweat x Sweat (ODF) Sweat x Sweat (ODF) Sweat x Sweat (ODF) Sweat x Sweat (ODF) Sweat x Sweat (ODF) Sweat x Sweat (ODF) Female Flare x Male Flare Female Flare x Male Flare Female Flare x Male Flare Sweat x Sweat (ODM x ODF) Sweat x Sweat (ODM x ODF) Sweat x Sweat (ODM x ODF) Sweat x Sweat (ODM x ODF) 1/4 3/8 1/2 5/8 3/4 1/4 3/8 1/2 5/8 3/4 7/8 1 1/8 1/4 3/8 1/2 1/4 3/8 1/2 5/8 HMI-1MM2 HMI-1MM3 HMI-1MM4 HMI-1MM5 HMI-1MM6 HMI1-1TT2 HMI1-1TT3 HMI1-1TT4 HMI1-1TT5 HMI1-1TT6 HMI1-1TT7 HMI1-1TT9 HMI-1FM2 HMI-1FM3 HMI-1FM4 HMI-1TT2MF HMI-1TT3MF HMI-1TT4MF HMI-1TT5MF Moisture Content Color Code (ppm H2O) 1.4 20 25 26 30 15 2.5 35 35 40 55 25 4 60 50 64 75 45 Caution (Purple) 75°F 100°F 125°F 5 35 40 42 50 33 9 55 65 68 85 50 15 85 90 109 120 80 Electrical Wet (Salmon) 75°F 100°F 125°F 25 130 145 150 165 120 43 160 205 230 290 150 70 190 290 370 420 180 Tools & Instruments Indication Liquid Temperature R-12 R-134A R-22 R-407C R-410A R-404A/507 Dry (Dark Blue) 75°F 100°F 125°F Heating Components Specifications • M axim um working pressure: 680 psig • UL/CUL file number: SA 4876 Indoor Air Quality Series 4 Connection Size (in 1/8”) Thermostats TT Connection Style TT = Sweat x Sweat Oils & Chemicals 1 Accessories, Supplies & Commodities HMI Hermetic Moisture Indicator K-202 Refrigeration Features • Highest sensitivity moisture indicator available • Herm etic, leak-free construction • Single indicator for all common refrigerants • Accurate color calibration at low ppm levels and higher tem peratures • Wide angle viewing/high visibility window for ease of monitoring • All brass corrosion resistant body for fewer leaks • Solid copper connections Nomenclature example: HMI 1TT4 Motors The HMI is designed to provide an accurate method of determining the moisture content of a system ’s refrigerant. The HMI has a unique high accuracy m oisture indicator for CFC, HCFC, and HFC refrigerants. Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 27 EMERSON CLIMATE TECHNOLOGIES-System Protectors HMI-Hermetic Moisture Indicators The HMI is designed to provide an accurate method of determining the moisture content of a system ’s refrigerant. The HMI has a unique high accuracy m oisture indicator for CFC, HCFC, and HFC refrigerants. Features • Highest sensitivity moisture indicator available • Herm etic, leak-free construction • Single indicator for all common refrigerants • Accurate color calibration at low ppm levels and higher tem peratures • Wide angle viewing/high visibility window for ease of monitoring • All brass corrosion resistant body for fewer leaks • Solid copper connections Nomenclature example: HMI 1TT4 HMI Hermetic Moisture Indicator 1 TT Connection Style TT = Sweat x Sweat Series 4 Connection Size (in 1/8”) Specifications • M axim um working pressure: 680 psig • UL/CUL file number: SA 4876 Ordering Information PCN Series Connection Size Description 065391 065392 065393 065394 065395 065405 065406 065407 065408 065409 065410 065411 065396 065397 065398 065622 065814 065979 065980 Male Flare x Male Flare Male Flare x Male Flare Male Flare x Male Flare Male Flare x Male Flare Male Flare x Male Flare Sweat x Sweat (ODF) Sweat x Sweat (ODF) Sweat x Sweat (ODF) Sweat x Sweat (ODF) Sweat x Sweat (ODF) Sweat x Sweat (ODF) Sweat x Sweat (ODF) Female Flare x Male Flare Female Flare x Male Flare Female Flare x Male Flare Sweat x Sweat (ODM x ODF) Sweat x Sweat (ODM x ODF) Sweat x Sweat (ODM x ODF) Sweat x Sweat (ODM x ODF) 1/4 3/8 1/2 5/8 3/4 1/4 3/8 1/2 5/8 3/4 7/8 1 1/8 1/4 3/8 1/2 1/4 3/8 1/2 5/8 HMI-1MM2 HMI-1MM3 HMI-1MM4 HMI-1MM5 HMI-1MM6 HMI1-1TT2 HMI1-1TT3 HMI1-1TT4 HMI1-1TT5 HMI1-1TT6 HMI1-1TT7 HMI1-1TT9 HMI-1FM2 HMI-1FM3 HMI-1FM4 HMI-1TT2MF HMI-1TT3MF HMI-1TT4MF HMI-1TT5MF Moisture Content Color Code (ppm H2O) Indication Liquid Temperature R-12 R-134A R-22 R-407C R-410A R-404A/507 Dry (Dark Blue) 75°F 100°F 125°F 1.4 20 25 26 30 15 2.5 35 35 40 55 25 4 60 50 64 75 45 Caution (Purple) 75°F 100°F 125°F 5 35 40 42 50 33 9 55 65 68 85 50 15 85 90 109 120 80 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-203 Wet (Salmon) 75°F 100°F 125°F 25 130 145 150 165 120 43 160 205 230 290 150 70 190 290 370 420 180 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 28 EMERSON CLIMATE TECHNOLOGIES-System Protectors HMI-Hermetic Moisture Indicators C D 1.56 1.69 1.81 1.94 2.50 1.19 1.31 1.41 0.34 0.34 0.47 0.47 0.59 0.34 0.47 0.47 0.94 0.94 1.19 1.19 1.53 0.94 1.19 1.19 E F Min G 1/4 SAE 3/8 SAE 1/2 SAE 5/8 SAE 3/4 SAE 1/4 SAE FM 3/8 SAE FM 1/2 SAE FM 3.13 3.38 3.62 3.88 5.00 2.75 3.00 3.22 1/4 ODF 5.56 0.34 0.94 0.25 0.38 HMI - 1TT3 3/8 ODF 5.61 0.34 0.94 0.38 0.40 HMI - 1TT4 1/2 ODF 5.87 0.47 1.19 0.50 0.50 HMI - 1TT5 5/8 ODF 5.87 0.61 1.19 0.63 0.63 HMI - 1TT6 3/4 ODF 6.56 0.61 1.50 0.75 0.63 HMI - 1TT7 7/8 ODF 6.31 0.61 1.50 0.88 0.75 HMI - 1TT9 1 1/8 ODF 6.59 0.67 1.37 1.13 0.90 HMI - 1TT2MF 1/4 ODM x 1/4 ODF 5.56 0.34 0.94 0.25 0.38 0.25 HMI - 1TT3MF 3/8 ODM x 3/8 ODF 5.61 0.34 0.94 0.38 0.38 0.38 HMI - 1TT4MF 1/2 ODM x 1/2 ODF 5.87 0.47 1.19 0.50 0.50 0.50 HMI - 1TT5MF 5/8 ODM x 5/8 ODF 5.87 0.61 1.19 0.63 0.50 0.62 Thermostats Indoor Air Quality HMI - 1MM2 HMI - 1MM3 HMI - 1MM4 HMI - 1MM5 HMI - 1MM6 HMI - 1FM2 HMI - 1FM3 HMI - 1FM4 HMI - 1TT2 Oils & Chemicals B Tools & Instruments Accessories, Supplies & Commodities A K-204 Refrigeration Dimensional Data (in) Type Number Connection Size Heating Components Electrical Motors Dimensional Data Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 29 EMERSON CLIMATE TECHNOLOGIES-System Protectors AMI-Moisture Indicators The AMI is designed to provide an accurate method of determining the m oisture content of a system’s refrigerant. The AMI has a unique high accuracy moisture indicator for CFC, HCFC and HFC ref rigerants. For the AMI-2 Series, see the bottom of the following page. Features • Highest sensitivity moisture indicator available • Take-Apart design for easy repair • Single indicator for all common refrigerants • Accurate color calibration at low ppm levels and higher tem peratures • Wide angle viewing/high visibility window for ease of monitoring • Solid copper connections Specifications • Maximum working pressure: • UL/CUL file number: Refrigeration 650 psig SA 4876 Nomenclature example: AMI 1SS4 AMI Moisture Indicator Series 1 Design Series 1 = standard connection 2 = bushing style SS Connection Style TT = Sweat x Sweat 4 Connection Size (in 1/8”) Ordering Information PCN Series Connection Size Description 048803 048804 048805 048806 048811 048812 048813 048814 048815 048816 047298 042771 022302 031136 031357 031578 048800 048801 048802 Male Flare x Male Flare Male Flare x Male Flare Male Flare x Male Flare Male Flare x Male Flare Sweat x Sweat (OD Female) Sweat x Sweat (OD Female) Sweat x Sweat (OD Female) Sweat x Sweat (OD Female) Sweat x Sweat (OD Female) Sweat x Sweat (OD Female) Sweat x Sweat (OD Female) Sweat x Sweat (OD Female) Sweat x Sweat (OD Female) Sweat x Sweat (OD Female) Sweat x Sweat (OD Female) Sweat x Sweat (OD Female) Female Flare x Male Flare Female Flare x Male Flare Female Flare x Male Flare 1/4 3/8 1/2 5/8 1/4 3/8 1/2 5/8 7/8 1 1/8 1/4 3/8 1/2 5/8 7/8 1 1/8 1/4 3/8 1/2 AMI-1MM2 AMI-1MM3 AMI-1MM4 AMI-1MM5 AMI-1SS2 AMI-1SS3 AMI-1SS4 AMI-1SS5 AMI-1SS7 AMI-1SS9 AMI-1TT2 EXTENDED ENDS AMI-1TT3 EXTENDED ENDS AMI-1TT4 EXTENDED ENDS AMI-1TT5 EXTENDED ENDS AMI-1TT7 EXTENDED ENDS* AMI-1TT9 EXTENDED ENDS* AMI-1FM2 AMI-1FM3 AMI-1FM4 *500 PSIG MWP Replacement Parts For AMI PCN Part Number 021371 020877 027511 Lenscap “O” Ring Lens Assembly Kit (Consists of lens assembly, lens cap and “O” ring) 12740-1 PS1525-2 X12978-1 Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-205 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 30 Moisture Content Color Code (ppm H2O) Dry (Dark Blue) Caution (Purple) Wet (Salmon) Indication Liquid Temperature 75°F 100°F 125°F 75°F 100°F 125°F 75°F 100°F 125°F R-12 R-134A R-22 R-407C R-410A R-404A/507 1.4 20 25 26 30 15 2.5 35 35 40 55 25 4 60 50 64 75 45 5 35 40 42 50 33 9 55 65 68 85 50 15 85 90 109 120 80 25 130 145 150 165 120 43 160 205 230 290 150 70 190 290 370 420 180 Connection Size A B C D E F Min G HMI - 1MM2 HMI - 1MM3 HMI - 1MM4 HMI - 1MM5 HMI - 1MM6 HMI - 1FM2 HMI - 1FM3 HMI - 1FM4 HMI - 1TT2 HMI - 1TT3 HMI - 1TT4 HMI - 1TT5 HMI - 1TT6 HMI - 1TT7 HMI - 1TT9 HMI - 1TT2MF HMI - 1TT3MF HMI - 1TT4MF HMI - 1 TT5MF 1/4 SAE 3/8 SAE 1/2 SAE 5/8 SAE 3/4 SAE 1/4 SAE FM 3/8 SAE FM 1/2 SAE FM 1/4 ODF 3/8 ODF 1/2 ODF 5/8 ODF 3/4 ODF 7/8 ODF 1 1/8 ODF 1/4 ODM x 1/4 ODF 3/8 ODM x 3/8 ODF 1/2 ODM x 1/2 ODF 3.13 3.38 3.62 3.88 5.00 2.75 3.00 3.22 5.56 5.61 5.87 5.87 6.56 6.31 6.59 5.56 5.61 5.87 5.87 1.56 1.69 1.81 1.94 2.50 1.19 1.31 1.41 0.34 0.34 0.47 0.47 0.59 0.34 0.47 0.47 0.34 0.34 0.47 0.61 0.61 0.61 0.67 0.34 0.34 0.47 0.61 0.94 0.94 1.19 1.19 1.53 0.94 1.19 1.19 0.94 0.94 1.19 1.19 1.50 1.50 1.37 0.94 0.94 1.19 1.19 0.25 0.38 0.50 0.63 0.75 0.88 1.13 0.25 0.38 0.50 0.63 0.38 0.40 0.50 0.63 0.63 0.75 0.90 0.38 0.38 0.50 0.50 0.25 0.38 0.50 0.62 K-206 Accessories, Supplies & Commodities Tools & Instruments Refrigeration 5/8 ODM x 5/8 ODF Oils & Chemicals Type Number Thermostats Indoor Air Quality Heating Components Electrical Dimensional Data Motors EMERSON CLIMATE TECHNOLOGIES-System Protectors AMI-Moisture Indicators Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 31 EMERSON CLIMATE TECHNOLOGIES-System Protectors AMI-Moisture Indicators AMI-2 Series Dimensions (in) PCN 064857 064167 064168 022303 028388 031219 Connection Size 5/8 ODM 7/8 ODM 1 1/8 ODM 1 3/8 ODM 1 5/8 ODM 2 1/8 ODM A Dia. B C Description 0.63 0.88 1.13 1.38 1.63 2.13 1.40 1.34 1.25 1.56 1.69 1.94 1.17 1.00 1.00 1.94 1.44 1.69 AMI-2S5 AMI-2S7 AMI-2S9 AMI-2S11 AMI-2S13 AMI-2S17 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-207 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 32 Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-System Protectors A-AS Suction Accumulators Ordering Information and Dimensional Data (in) PCN 060819 060963 060812 060813 060964 060965 060967 060821 060966 060820 060824 060818 060822 060823 060814 060815 060817 060816 060825 060826 060968 060827 060969 060828 060970 A Fitting Size (nominal) 1/2 5/8 5/8 3/4 5/8 3/4 1/2 5/8 5/8 3/4 3/4 7/8 3/4 7/8 7/8 1-1/8 1-1/8 1-3/8 7/8 7/8 1-1/8 1-3/8 1-5/8 1-5/8 1-5/8 B Diameter C Height 3.00 3.00 3.00 3.00 3.00 3.00 4.00 4.00 4.00 4.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 5.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 8.00 10.00 12.00 12.00 15.00 14.00 6.00 6.00 10.00 10.00 9.00 9.00 12.00 12.00 13.00 13.00 17.00 17.00 11.00 13.00 13.00 14.00 17.00 20.00 25.00 D Fitting Separation 1.63 1.63 1.63 1.63 1.63 1.63 2.50 2.50 2.50 2.50 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.75 2.94 2.94 2.94 2.94 2.94 2.94 2.94 Weight (lbs) Tons R-22 (+40°F) 2.00 2.40 2.90 2.90 3.30 3.30 2.80 2.80 4.60 4.60 5.10 5.10 6.60 6.60 7.10 7.10 8.40 8.40 10.00 11.70 11.70 12.10 15.40 18.10 22.60 *Not supplied with a fusible plug Description A-AS 3 84* A-AS 3 105* A-AS 3 125* A-AS 3 126* A-AS 3 145* A-AS 3 146* A-AS 4 64 A-AS 4 65 A-AS 4105 A-AS 4 106 A-AS 5 96 A-AS 5 97 A-AS 5 126 A-AS 5 127 A-AS 5 137 A-AS 5 139 A-AS 5 179 A-AS 5 1711 A-AS 6 117 A-AS 6 137 A-AS 6 139 A-AS 6 1411 A-AS 6 1713 A-AS 6 2013 A-AS 6 2513 Tools & Instruments Dimensional Data 2.00 3.00 3.00 4.00 3.00 4.00 2.00 3.00 3.00 4.00 4.00 7.30 4.00 7.30 7.30 11.80 11.80 18.80 7.30 7.30 11.80 18.80 28.50 28.50 28.50 Holding Capacity (lbs) 50% Full 40°F Liquid 40°F Liquid R-22/R-134a R-404A/R-507 1.50 1.50 2.00 2.00 3.00 2.50 3.00 2.50 3.50 3.00 3.50 2.75 2.50 2.00 2.50 2.00 4.00 3.50 4.00 3.50 6.00 5.50 6.00 5.50 8.00 7.50 8.00 7.50 8.50 8.00 8.50 8.00 12.00 10.00 12.00 10.00 10.00 9.00 12.84 11.49 12.84 11.49 14.05 12.57 17.32 15.49 20.62 18.44 25.81 23.08 Heating Components Electrical Specifications • Maximum working pressure: 300 psig • Fusible plug tem perature: 430°F • UL/CUL file num ber: SA 10225 5 Fitting Size in 1/8” Indoor Air Quality 12 Height (in) Thermostats 3 Diameter (in) Oils & Chemicals Series AS Accumulator Suction K-208 Refrigeration A Accessories, Supplies & Commodities Nomenclature example: A-AS 3 125 Motors The A-AS protects the compressor from liquid slugging and is used with CFC, HCFC, and HFC refrigerants. It is av ailable for systems through 28 tons nominal capacity. Features • Designed to operate in a range of +40°F to -40°F evaporator temperature • Fusible plug on larger diameter units • Solid copper connections • Corrosion resistant epoxy powder paint finish • Inlet deflector directs refrigerant flow to prev ent internal splashing and aid in the collection of refrigerant oil Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 33 Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Shut Off Valves ACK Check Valves The ACK check valve is a normally closed magnetic check valve that prevents reverse ref rigerant flow in liquid lines and compressor discharge lines. Features • Copper Connection Sizes 1/4” through 2-5/8” • Herm etic Spun Copper Design • Near Zero Internal Leak Rate • Magnetic Checking Action • Built-In 30 Mesh Stainless Steel Strainer • Can Be Installed In Any Position Specifications • UL/CUL File num ber: SA 5312 Electrical Nomenclature exam ple: ACK-4 ACK Check Valve Series 4 Copper ODF Connection Size (in 1/16”) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Dimensional Data Ordering Information and Dimensional Data (in) PCN Connection Size A B C D 064985 064986 064987 064988 064989 064990 064991 064992 064993 064994 064995 1/4 ODF 3/8 ODF 1/2 ODF 5/8 ODF 3/4 ODF 7/8 ODF 1-1/8 ODF 1-3/8 ODF 1-5/8 ODF 2-1/8 ODF 2-5/8 ODF 4.00 4.00 5.00 5.00 7.00 7.00 8.38 9.38 10.50 12.00 13.00 0.88 0.88 1.13 1.13 1.63 1.63 2.13 2.63 3.13 3.63 4.13 0.254 ± 0.002 0.379 ± 0.002 0.504 ± 0.002 0.629 ± 0.002 0.754 ± 0.002 0.879 ± 0.003 1.130 ± 0.003 1.380 ± 0.003 1.630 ± 0.003 2.130 ± 0.003 2.630 ± 0.003 0.19 0.40 0.31 0.50 0.63 0.42 0.94 1.04 1.07 1.34 1.50 Opening Opening Pressure Pressure (oz/sq in) (psig) 1.20 0.08 1.30 0.08 3.50 0.22 3.50 0.22 3.80 0.24 3.80 0.24 6.80 0.43 10.20 0.64 11.40 0.71 18.10 1.13 23.00 1.44 MWP Leak Rate Nominal Tons Nominal Tons (psig) CIM @ 60 psi R-22 Suction R-22 Liquid 40°F @ 1 psi 40°F @ 1 psi 800 0.015 0.40 2.60 800 0.015 0.60 3.10 680 0.034 1.20 9.40 680 0.034 1.40 13 680 0.074 3.30 27 680 0.074 3.70 29 680 0.122 6 51 680 0.172 9.50 79 680 0.272 17 102 680 0.386 30 213 680 0.512 50 375 Cross Reference (Identical Lay-In) Emerson A-1 Components Superior ACK-4 ACK-6 ACK-8 ACK-10 ACK-12 ACK-14 ACK-18 ACK-22 ACK-26 ACK-34 ACK-42 MS-4 MS-6 MS-8 MS-10 MS-12 MS-14 MS-18 MS-22 MS-26 MS-34 MS-42 900M-4S 900M-6S 900M-8S 900M-10S 900M-12S 900M-14S N/A N/A N/A N/A N/A K-209 Cv Description 0.9 1.0 3.1 3.6 8.0 9.2 15.4 23.8 24.2 38.7 71.7 ACK-4 ACK-6 ACK-8 ACK-10 ACK-12 ACK-14 ACK-18 ACK-22 ACK-26 ACK-34 ACK-42 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 34 Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Shut Off Valves ABV Refrigeration Ball Valve-R-410A Specifications • Body: • Extensive Stubs: • Maximum Working Pressure: • Not for use with R-123 • Fluid tem perature range: • UL/CUL f ile number: Forged Brass 100% Copper Connections 680 psig except as noted below +300°F to -40°F SA 5312 Electrical Features • Forged brass body • Herm etic design • Compatible with new refrigerants/lubricants • Full internal ports through 2 1/8” • Bi-directional flow characteristics • Valve stem cap retained by strap attached to m ain body • Integrated access port available on all sizes Motors The ABV isolates suction, discharge, and liquid line pipework during maintenance shutdown periods. Nomenclature example: ABV 5A BV Ball Valve 5 Connection Size (in 1/8”) A Access Valve (optional) Heating Components A Series PCN with Access Valve Valve Port Size Connection Size A B 064383 062104 062105 062106 064385 062107 062108 062109 062110 062111 062112 062113 064384 062114 062115 062116 064386 062117 062118 062119 062120 062121 062122 062123 ABV2 ABV3 ABV4 ABV5 ABV6 ABV7 ABV9 ABV11 ABV13 ABV17 ABV21* ABV25* 1/2 1/2 1/2 1/2 3/4 3/4 1 1 1/4 1 1/2 2 2 2 1/4 ODF 3/8 ODF 1/2 ODF 5/8 ODF 3/4 ODF 7/8 ODF 1 1/8 ODF 1 3/8 ODF 1 5/8 ODF 2 1/8 ODF 2 5/8 ODF 3 1/8 ODF 5.47 5.47 6.35 6.35 7.42 7.42 9.11 9.97 10.98 11.72 11.72 11.81 2.55 2.55 2.97 2.97 3.49 3.49 4.47 4.84 5.38 5.77 5.77 5.82 *500 psig maxim um work pressure K-210 Tools & Instruments Dimensions (in) PCN without Access Valve Refrigeration Selection & Ordering Information Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Dimensional Data Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 35 Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Oil Controls High Efficiency Centrifugal Oil Separator The High Efficiency Centrifugal Oil Separator is used in ultra-low temperature system s with long refrigerant lines or inherent oil return problem s. It is also used on multiple com pressor racks for supermarkets and air conditioning system s for use with CFCs, HCFCs, HFCs, and their lubricants. Suitable for use with R-410A. Features • Internal oil collection screen • Herm etic welded or accessible bolted flange construction • Corrosion resistant epoxy powder paint • High efficiency (99%) centrif ugal separation • R-410A pressure rated Nomenclature example: A-FC 8241717H Indoor Air Quality Heating Components A Thermostats Oils & Chemicals C F F = Flanged Series W = Welded Centrifugal 17 Outlet Connection in 1/8” 17 24 8 Inlet Diameter Length Connection (in) (in) in 1/8” PCN Part Contains 065847 065849 Float Assembly Kit* Gasket Kit Flange w/intergral float ass’y and flange gasket Flange gasket *Repairs AC & R series S1900 Standard and 5200 Helical Oil Separators Ordering Information 065895** 065896** 066094** 066095** 066096** 065930 065931 065362 065932 065933 065934 065276 065935 065936 065937 065938 Solder Connection Size 7/8 1 1/8 1 3/8 1 5/8 2 1/8 1 3/8 1 3/8 1 5/8 1 5/8 2 1/8 2 1/8 2 1/8 2 1/8 2 5/8 2 5/8 3 1/8 A B C D Description 17.01 19.02 18.00 18.00 18.13 17.00 17.00 17.00 17.00 17.13 17.13 19.06 19.06 22.10 22.10 25.10 2.95 3.07 3.94 4.53 4.65 3.94 3.94 4.53 4.53 4.65 4.65 6.83 6.83 6.11 6.11 7.05 4.00 4.00 4.25 4.25 4.38 6.00 6.00 6.00 6.00 6.00 6.00 5.38 5.38 10.00 10.00 12.00 5.00 10.00 5.00 10.00 5.00 10.00 5.00 10.00 5.00 10.00 10.00 A-WC 41777 A-WC 41999 A-WC 6181111 A-WC 6181313 A-WC 6181717 A-FC 6221111 A-FC 6221111H A-FC 6221313 A-FC 6221313H A-FC 6221717 A-FC 6221717H A-FC 8241717 A-FC 8241717H A-FC 10272121 A-FC 10272121H A-FC 12302525H Tools & Instruments Refrigeration H 5” Legs Standard H = 10” Legs Replacement Parts PCN Accessories, Supplies & Commodities Specifications • Maximum working pressure: 450 psi - flanged models 600 psi - welded models SA8547 • UL/CUL file num ber: K-211 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 36 R-134a -40F +40F R-22/407C +40F +40F R-404A/507 -40F +40F R-410A -40F +40F Oil Pre-Charge Tons kW Tons kW Tons kW Tons kW Tons kW Tons kW Tons kW Tons kW Amount(oz.) 4.5 5.3 8.5 12 14 12 12 14 14 14 14 23 23 16 19 30 42 48 42 42 48 48 50 50 80 80 5.6 6.5 10 15 17 15 15 17 17 17 17 28 28 19 23 37 51 58 51 51 58 58 61 61 97 97 7.1 25 8 8.3 29 9.4 13 46 15 19 65 21 21 74 24 19 65 21 19 65 21 21 74 24 21 74 24 22 77 25 22 77 25 35 124 40 35 124 40 28 33 53 74 84 74 74 84 84 88 88 140 140 6.3 7.4 12 16 19 16 16 19 19 20 20 31 31 22 26 41 58 66 58 58 66 66 69 69 110 110 8.3 9.7 16 22 25 22 22 25 25 26 26 41 41 29 34 54 76 87 76 76 87 87 91 91 145 145 71 280 63 220 83 290 3 10” 45 159 56 195 2 5/8" 3 1/8" 3 3 10” 12” 45 72 159 253 56 88 195 71 248 80 280 63 220 83 290 309 112 393 127 445 100 349 131 460 - 12 43 14 50 23 80 32 112 37 129 - 14 14 25 25 25 25 25 25 25 25 25 25 25 A-WC 41777 A-WC 41999 A-WC 6181111 A-WC 6181313 A-WC 6181717 A-FC 6221111 A-FC 6221111H A-FC 6221313 A-FC 6221313H A-FC 6221717 A-FC 6221717H A-FC 8241717 A-FC 8241717H - - - 25 A-FC 10272121 - - - 25 25 A-FC 10272121H A-FC 12302525H Thermostats Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments 248 80 38 45 71 100 114 - Indoor Air Quality 2 5/8" 11 13 20 28 32 - Description K-212 Refrigeration Solder Syle Shell Connection Number O.D. Size (ODF) 7/8" 1 4” 1 1/8" 1 4” 1 3/8" 4 6” 1 5/8" 4 6” 2 1/8" 4 6” 1 3/8" 2 6” 1 3/8" 2 6” 1 5/8" 2 6” 1 5/8" 2 6” 2 1/8" 2 6” 2 1/8" 2 6” 2 1/8" 3 8” 2 1/8" 3 8” Motors Maximum Capacity of Refrigeration at Evaporator Temperature Electrical Capacity Table Heating Components EMERSON CLIMATE TECHNOLOGIES-Oil Controls High Efficiency Centrifugal Oil Separator Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 37 Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Oil Controls A-W & A-F Oil Separators The A-W and A-F are used for multiple compressor racks in superm arkets and air conditioning systems for use with HCFCs,HFCs and their lubricants. Specifications Features • Maxim um working pressure: 450 psi • Herm etic welded or accessible bolted flange construction • UL/CUL file num ber: SA10468 • Solid copper connections • Corrosion resistant epoxy powder paint Nomenclature example: AW 5582 4 A Series W W = Welded F = Flanged 5582 Model Number 4 Connection Size (in 1/8”) Ordering Information* and Capacity Table Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical FLANGED R-12 PCN -40 F/C -40 40F Tons F/C (4C) kW Tons 060877 1 3.5 1.5 060878 3 10.6 4 060879 4.5 15.9 5.5 060759 6 21.2 7.5 060760 7.5 26.6 10 060761 9 31.9 11.5 060875 11 38.9 14 060876 17 60.2 22 40F -40 F/C (4C) Tons kW 5.3 1.5 14.2 4.5 19.5 7 26.6 9 35.4 11.5 40.7 14 49.6 16 77.9 25 R-22/R-407C -40 40F F/C (4C) kW Tons 5.3 2 15.9 5.5 24.8 8 31.9 11 40.7 14 49.6 18 56.6 18 88.5 30 40F -40 F/C (4C) Tons kW 7.1 1.5 19.5 4.8 28.3 7.5 37.2 9.5 47.8 12 62 16 63.7 20 106 30 R-502 -40 40F F/C (4C) kW Tons 5.3 2 16.8 5.8 26.6 8.5 33.6 11.5 42.5 14.5 56.6 17.5 70.8 24 106 35 40F -40 F/C (4C) Tons kW 7.08 1 20.4 3.3 30.1 4.8 40.7 6.5 51.3 8 62 9.5 85 11.8 124 18 R-134a -40 40F F/C (4C) kW Tons 3.5 1.8 11.5 4.5 16.8 6.5 23 8.5 28.3 11.5 33.6 13.3 41.6 16 63.7 25.6 40F -40 F/C (4C) Tons kW 6.2 1.5 15.9 4 23 6.5 30.1 8.5 40.7 10.5 46.9 14 56.6 17.5 89.4 26 40F -40 F/C (4C) Tons kW 5.3 1.5 14.2 4.5 19.5 7 26.6 9 35.4 11.5 40.7 14 42.3 13 49.6 16 77.9 25 R-22/R-407C -40 40F F/C (4C) kW Tons 5.3 2 15.9 5.5 24.8 8 31.9 11 40.7 14 49.6 18 45.8 14 56.6 18 88.5 30 40F -40 F/C (4C) Tons kW 7.1 1.5 19.5 4.8 28.3 7.5 37.2 9.5 47.8 12 62 16 49.8 15 63.7 20 106 30 R-502 -40 40F F/C (4C) kW Tons 5.3 2 16.8 5.8 26.6 8.5 33.6 11.5 42.5 14.5 56.6 17.5 52.8 20 70.8 24 106 35 40F -40 F/C (4C) Tons kW 7.08 1 20.4 3.3 30.1 4.8 40.7 6.5 51.3 8 62 9.5 70.4 9.5 85 11.8 124 18 R-134a -40 40F F/C (4C) kW Tons 3.5 1.8 11.5 4.5 16.8 6.5 23 8.5 28.3 11.5 33.6 13.3 33.4 13.7 41.6 16 63.7 25.6 40F (4C) kW 6.2 15.9 23 30.1 40.7 46.9 48.2 56.6 89.4 R-404A/R-507 -40 40F F/C (4C) kW Tons 5.3 2 14.2 5.5 23 8.5 30.1 11 37.2 14 49.6 17 62 23 92 34 40F (4C) kW 7.0 19.0 30.0 38.0 49.0 60.0 81 121 Description A-F 58824 A-F 58855 A-F 58877 A-F 58889 A-F 589011 A-F 589213 A-F 579213 A-F 579417 SEALED R-12 PCN -40 F/C -40 40F Tons F/C (4C) kW Tons 060933 1 3.5 1.5 060934 3 10.6 4 060931 4.5 15.9 5.5 060974 6 21.2 7.5 060930 7.5 26.6 10 060975 9 31.9 11.5 060978 9 31.7 12 060979 11 38.9 14 060980 17 60.2 22 R-404A/R-507 -40 -40 F/C 40F 40F F/C kW (4C) (4C) Tons Tons kW 1.5 5.3 2 7.0 4 14.2 5.5 19.0 6.5 23 8.5 30.0 8.5 30.1 11 38.0 10.5 37.2 14 49.0 14 49.6 17 60.0 11 38.7 19 66.9 17.5 62 23 81 26 92 34 121 *See replacement parts page. Repair kits for style 2 only. Dimensional Data Seal Units: A-W Description Style No. A-W 55824 A-W 55855 A-W 55877 A-W 55889 A-W 559011 A-W 569011 A-W 569213 A-W 569417 1 Connection Dimensions (in) Size A B 1/2 ODF 10.75 5/8 ODF 13.2 7/8 ODF 15.0 4.0 1-1/8 ODF 16.25 1-3/8 ODF 19.5 1-3/8 ODF 15.75 1-5/8 ODF 19.0 6.0 2-1/8 ODF 19.5 Flanged Units: A-F Description Style No. A-F 58824 A-F 58855 A-F 58877 A-F 58889 A-F 589011 A-F 589213 A-F 579213 A-F 579417 K-213 3 2 Connection Size 1/2 ODF 5/8 ODF 7/8 ODF 1 1/8 ODF 1 3/8 ODF 1 5/8 ODF 1 5/8 ODF 2 1/8 ODF Dimensions (in) A B C 10.5 15.0 18.0 4.0 5.5 21.25 21.37 21.75 20.12 4.37 6.0 20.31 4.63 Description A-W 55824 A-W 55855 A-W 55877 A-W 55889 A-W 559011 A-W 559213 A-W 569011 A-W 569213 A-W 569417 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 38 Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Oil Controls A-WZ Oil Separators The A-WZ is used for multiple compressor racks in supermarkets and air conditioning system s for use with HCFCs, HFCs and their lubricants. Suitable for use with R-410A. Motors Features • Hermetic welded construction • Nickel plated steel connections • Corrosion resistant epoxy powder paint Electrical Specifications • Maximum working pressure: 600 psi • UL/CUL f ile number: SA8547 • CE marked per PED 97/23EC Nomenclature example: A-WZ 55824 A WZ 5582 Series W = Welded Model Number 4 Connection Size (in 1/8”) R-22/R-407C R-404A/R-507 R-410A 40F -40F/C -40F/C 40F 40F -40F/C -40F/C 40F 40F -40F -40F +40F +40F Oil (4C) Tons kW (4C) (4C) Tons kW (4C) (4C) Tons kW Tons kW Pre-charge kW Tons kW Tons kW Amount (oz.) 6.2 1.5 5.3 2 7.1 1.5 5.3 2 7.0 2.7 9 3.1 11 17 15.9 4.5 15.9 5.5 19.5 4 14.2 5.5 19.0 7.4 26 8.4 29 17 23 7 24.8 8 28.3 6.5 23 8.5 30.0 11 38 12 43 17 30.1 9 31.9 11 37.2 8.5 30.1 11 38.0 15 52 17 59 17 40.7 11.5 40.7 14 47.8 10.5 37.2 14 49.0 19 66 21 75 17 46.9 14 49.6 18 62 14 49.6 17 60.0 18 62 20 70 20 48.2 13 45.8 14 49.8 11 38.7 19 66.9 19 66 21 75 20 56.6 16 56.6 18 63.7 17.5 62 23 81 18 64 21 72 20 89.4 25 88.5 30 106 26 92. 34 121 24 85 28 96 20 A-WZ 55824 A-WZ 55855 A-WZ 55877 A-WZ 55889 A-WZ 559011 A-WZ 56909 A-WZ 569011 A-WZ 56929 A-WZ 569213 Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Dimensional Data Description Indoor Air Quality 066135 066136 066137 066138 066139 066140 066141 066142 066143 R-134a Solder Shell Length -40F/C -40F/C 40F Connection OD (in.) (in.) Tons kW (4C) Size (ODF) Tons (in.) 1/2 4 10.88 1 3.5 1.8 5/8 4 13.31 3.3 11.5 4.5 7/8 4 15.13 4.8 16.8 6.5 1 1/8 4 16.38 6.5 23 8.5 1 3/8 4 19.63 8 28.3 11.5 1 1/8 6 15.50 9.5 33.6 13.3 1 3/8 6 15.75 9.5 33.4 13.7 1 1/8 6 18.50 11.8 41.6 16 1 5/8 6 18.50 18 63.7 25.6 K-214 Refrigeration PCN Thermostats Maximum Capacity of Refrigeration at Evaporator Temperature Heating Components Ordering Information and Capacity Table Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 39 Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Oil Controls AOR Oil Reservoirs The AOR oil reservoir is a holding vessel for stand-by oil necessary for the operation of com mercial refrigeration systems. It is a direct replacem ent of popular com petitive models. Features • Two sight glasses with floating ball indicators - 2 gallon model • Three sight glasses with floating ball indicators - 4 gallon model • 3/8” flare rotolock valves on top and bottom • Corrosion resistant epoxy powder paint finish • Standard m ounting stud 3/8 x 16 TPI Specifications • M axim um working pressure: 450 psi • UL/CUL file number: SA8547 Nomenclature example: AOR-3 AOR Series 3 Gallons Electrical Ordering Information PCN Total Volume Gallons 064950 065981 064951 2 3 4 A Level Volume (gals) 3/4 2/3 1-1/2 B Level Volume (gals) 1-2/3 2-2/3 3-3/4 Length (in) Number of sight glasses Description 20” 31” 38” 2 3 3 AOR-2 AOR-3 AOR-4 PCN Part Contains 066002 Mounting Kit Mounting brackets, self-tapping bolts and mounting stud nuts Dimensional Data Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Replacement Parts for AOR Oil Reservoirs K-215 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 40 EMERSON CLIMATE TECHNOLOGIES-Oil Controls AOF High Efficiency Oil Filter Highly Recommended for Scroll Compressors The AOF is designed to protect the compressor f rom dirt and all solid contaminants including metallic magnetic particles. It is ideal for use with compressors that require a 4 micron or higher filtration rating. PCN Lay-in Diameter Description 064952 9.63 3.06 AOF 303 EMERSON CLIMATE TECHNOLOGIES-Oil Controls AOF High Efficiency Take-Apart Oil Filter The AOF is designed to protect the compressor from dirt and all solid contam inants including metallic magnetic particles. It is ideal for burnout/clean-up situations. Thermostats 500 psig SA 7175 Description AOF 023S* FO23 Cartridge Accessories, Supplies & Commodities PCN 062784 064799 Oils & Chemicals Specifications • Maximum working pressure: • UL/CUL file number: Ordering Information Indoor Air Quality Features • Compatible with all oils • Solid copper connections • Quick change filter cartridge • Corrosion resistant epoxy powder paint finish • 100% efficient to 4 micron particles; 99% efficient to 3 micron particles • 3/8 ODF connections • Quick removal cover design sim plifies filter replacement • High debris capacity with low pressure drop Heating Components Electrical 680 psig SA 3124 Tools & Instruments *Cartridge not included K-216 Refrigeration Specifications • M axim um working pressure: • UL/CUL file number: Ordering Information Motors Features • Corrosion resistant epoxy powder paint finish • 3/8” SAE connections for easy installation in oil lines • 100% efficient to 4 micron particles; 99% efficient to 3 micron particles • Com patible with all oils • High debris capacity with low pressure drop Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 41 Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Oil Controls AOFD 553 Oil Filter Drier The AOFD is designed specifically for refrigerant system s that use POE oil. POE oil is hygroscopic in nature, which m eans that it attracts and absorbs water. M oisture in a closed system can produce acid and will harm the com pressor. The AOFD protects compressors by removing moisture and trapping contaminants. Features • Designed to clean and dry POE Oil • 3/8” male flare connections for easy replacement • Large filter surface area to provide m axim um filtration • Contains desiccant for m oisture removal • Designed to operate at a very low pressure drop • 10 micron filtration for optimum oil cleaning • Dual access valves f or pressure drop m onitoring Specifications • UL/CUL file number: SA3124 Refrigerant Type R-22 R-134A R-404A R-407C Drops @ 125°F 497 518 518 435 Ordering Information PCN Description 062829 AOFD 553 Oil Filter Drier Dimensional Data Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components AOFD Water Capacity Table K-217 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 42 Refrigeration JB1 - Junction Box MO1 - Series Relief Connector Ordering Information Solenoid Coil Model Number, Voltage, Frequency (included) Motors Electrical 5-10 seconds 5-10 seconds 120 seconds SPDT 10A @ 125; 5A @ 220 V AC 50/60 Hz • Refrigerant compatibility: HFC, HCFC, CFC • Oil temperature: 180°F Max. • Storage and transport temperature: 140°F Max. • Operating am bient temperature: 120°F Max. • Oil supply fitting: 1/4” Male SAE SA8547 • UL/CUL f ile num ber: • Transformer VA requirem ents* 25” *NOTE: Field supplied transformer should always be of the same prim ary voltage as the electrical supply Heating Components Oil Management Control 640 psi 350 psi 24 V AC, 50/60 Hz ASC 2L 24 V AC, 50/60 Hz Indoor Air Quality The OMB is a com pressor crankcase oil level protective control ideal for use with Copeland Scroll® models ZF, ZB, ZR and ZS. It is also recomm ended for Copeland® brand products, Carlyle, Bitzer, and other semi-herm etic com pressors. Features • Precision oil lev el measurement for m axim um Specifications protection • Maximum working pressure: • Easy monitoring with alarm and status lights • Solenoid MOPD: • Foam resistant design prevents nuisance trips unlike optical sensor designs • Supply voltage: • Contaminant proof operation ensures accurate control • Solenoid coil: • Only approv ed oil level control for Copeland Scroll® • Current consumption: 0.6A Compressors • Time delay for low level signalling: • 5-time lockout feature protects compressor from repeated low oil level condition • Time delay for after setpoint recovery: • Alarm delay tim e: Nomenclature example: OMB-JB1 ASC2 24 50/60 • Alarm switch: OMB JB1 ASC2 24 50/60 • Alarm contact rating: Compressors, Chillers, Condensers EMERSON CLIMATE TECHNOLOGIES-Oil Controls OMB PCN Description 065365 065366 OMB-JB1 ASC 2 24/50-60 - STD OMB-MO1 ASC 2 24/50-60 - STD Adapters Thermostats Oil Management Control OMB-ACA ADAPTER (3/4” x 14 NPTF) Copeland® Glacier, ZF, ZS, ZB OMB-ACB ADPATER (1 1/8” x 12 UNF) Copeland® A/C ZR OMB-ACD ADAPTER (1 1/4” x 12 UNF) Copeland® A/C Summit Series OMB-ACE ADAPTER (1 3/4” x 12 UNF) Copeland® Specter Series OMB-AUA ADAPTER Copeland® 6D semi-hermetic Service Parts PCN Description 048638 020877 064812 049191 Inlet Flare Screen Sight Glass O-Ring Mounting O-Rings (3 pieces) KS-30112 Solenoid Repair Kit Dimensional Data Unit must be mounted horizontally for correct operation. K-218 Accessories, Supplies & Commodities 065668 065667 066077 066078 - Tools & Instruments Description Refrigeration PCN Oils & Chemicals (to attach OMB to Copeland Scroll® compressor for new installation only) Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 43 EMERSON CLIMATE TECHNOLOGIES-Oil Controls W-OLC Mechanical Oil Level Regulator The W-OLC controls the oil level in the compressor crankcase Specifications with a fl oat operated valv e and keeps the oil level at the compressor manufacturer’s recomm ended level. It is a direct • Maxim um working pressure: • UL/CUL file number: replacem ent of popular com petitive m odels. • Max. OPD: Features • Corrosion resistant epoxy powder paint finish • Universal m ounting pattern f or standard semi herm etic com pressors 450 psi SA8547 30 psi Nomenclature exam ple: W-OLC-2 W-OLC 2 Series Sight Glass* * 2 = 1/2, 4 = 1/4, 2 -4 = adjustable Ordering Information PCN Sight Glass Level Description 064953 064954 065170 1/2 sight glass 1/4 sight glass 1/4 to 1/2 level (adjustable) W-OLC-2 W-OLC-4 W-OLC-2-4 Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration 0 Note: Data Obtained using POE lubricant of 86 F with a 1 inch diameter sight glass Refrigeration Tools & Instruments Accessories, Supplies & Commodities The Oil Level factory setting is in the middle of the Oil Level factory setting is in the middle of the Sight Glass at 30 PSI for the Oil Level Control. Located on the top of the control is the seal cap. Remove this to adjust the oil level. To adjust the stem, turn it clockwise and counterclockwise, respectively, to lower and raise the stem. One can determine the adjustment needed from the OLC-2-4 Oil Level Chart. One eighth of an inch increments are used to illustrate the oil level at a selection of differential pressure conditions. Unlike our Competitors Controls no damage will occur when attempting to adjust beyond 7 turns. Our Design has a hard Stop to prevent damage. In the case of an unexpected system defrost or load increase, large amounts of oil will return through the suction line. Consequently, the oil control will not be able to keep the oil level from rising beyond the control point. See adapters page. K-219 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 44 Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Oil Controls Universal Acid Test Kit The Universal Acid Alert Test Kit provides a reliable indication as to the acid level of the refrigeration oil. EMERSON CLIMATE TECHNOLOGIES-Temperature Pressure Controls Quick Select Guide Application Feature Type Accessories, Supplies & Commodities Oils & Chemicals Thermostats Temperature Control, Adjustable Set Point and Differential TS1 Single Pressure Control, Adjustable Set Point and Differential PS1 Dual Pressure Control, Adjustable Set Point and Differential PS2 Differential PressureControl FD113 Mini-Pressure Control PSC Electronic Fan Speed Control FSX Industrial Pressure Control, U.L. Approved FF444 Tools & Instruments Controls Controls Controls Controls K-220 Refrigeration Commercial Refrigeration Air Conditioning Commercial Refrigeration Air Conditioning Commercial Refrigeration Air Conditioning Commercial Refrigeration Air Conditioning Mini-Pressure Controls Mini-Pressure Controls Industrial Pressure Controls Heating Components Description AA Kit Universal Indoor Air Quality PCN 064427 Electrical Motors Features • Quick and easy test kit • Univ ersal acid test kit for use with all refrigeration lubricants • By changing the percentage of oil sample taken, the acid number of the oil can be accurately determined • Phase separation of the chemicals elim inates interference from discolored oil Ordering Information Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 45 Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Temperature Pressure Controls TS1 Series Single Control The TS1 series adjustable thermostats are designed for application in refrigeration and heat pump system s. In these systems, therm ostats serve control and monitoring functions, such as space temperature control, high/low temperature alarming or defrost termination. By operating a set of electrical contacts, a tem perature value is kept inside a certain limit. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Sev eral housing variants and sensors are provided in order to suit a control to a specific application. Features • Adjustable temperature and differentials • Range and differential individually lockable by wire seal • Captive terminal and cover screws • Manual toggle for system checkout and override • Bellows heater for thermostats with vapour charge • Room thermostats with insulation console • Standard accessories include mounting brackets and knob with lockplate on all individually packed controls • Non-ambient sensitive • Heavy-duty SPDT switch allows handling of most loads directly without the use of relays Specifications • Ambient tem perature ranges -50°C to +70°C (-58°F to +158°F) • SPDT switch rated for 120 VAC/240VAC at 24FLA and 144 LRA • Agency approvals include: UL/CUL file num ber E85974, VDE 0631/0660, TÜV, CE 73/23/EWG, CE 93/68/EWG Options • Vapor, liquid and cross-ambient charges • Sensor shape f or various applications • Factory set to customer specification • Different types of mounting brackets • Sensor bulb wells and capillary tube holders • Special approvals • Range and differential pointer in units °C and °F Nomenclature example: TS1 B1E TS1 Product Name TS1 = Adjustable thermostat TSA = Customer specials B 1 E Temperature Range Housing Variant/function A = Wall mount design, top adjustment B = Wall mount design, top adjustment, off-switch C = Frost monitor, auto reset D = Frost monitor, manual reset X = Wall mount design, top adjustment, 0 = +40 to +68°F (+4.5 to +20°C) 1 = -50 to +14°F (-45 to -10°C) 2= -22 to +50°F (-30 to +10°C) 3= +14 to +77°F (-10 to +25°C) 4= -13 to +86°F (-25 to +30°C) 5= +68 to +140°F (+20 to +60°C) 6 = +122 to +212°F (+50 to +100°C) NOTES Temp ranges 0-4: manual reset for falling temperature Temp ranges 5 and 6: manual reset for rising temperature. Sensor Type A = Vapor Charge, 2 m. capillary C = Liquid Charge, 2 m. bulb E = Vapor Charge, 0 m. coil F = Adsorption Charge, 2 m. bulb P = Vapor Charge, 2 m. capillary for housing variant A/B. 6 m. capillary for housing variant C/D/X. Ordering Information Top Operated Thermostats Without Off-Switch (Capillary Type Sensor) Type PCN TS1-X2A TS1-X4F 097926 097929 Adjustment Range Upper Setpoint °F (°C) Different Setpoint °F (°K) -22 TO 59 (-30...+15) -22 TO 95 (-30...+35) 3 TO 29 (2 TO 16) 5 TO 36 (3...20) Factory Setting °F (°C) 30/21 (-1/-6) 41/32 (+5/0) Temperature Sensor Charge Type VAPOR ADSORPTION 6 FT. (2 m.) capillary 6 FT. (2 m.) cap. & bulb Room Thermostats Top Operated Without Off-Switch (Includes Insulation Console and Coil Type Sensor) Type PCN TS1-X2E TS1-X3E 097932 097935 Adjustment Range Upper Setpoint °F (°C) Different Setpoint °F (°K) -22 TO 59 (-30...+15) 14 TO 95 (-10...+35) 3 TO 29 (2 to 16) 3 TO 29 (2 TO 16) Factory Setting °F (°C) 39/35 (+4/+2) 68/64 (+20/+18) Temperature Sensor Charge Type VAPOR VAPOR Coil Coil Freeze-Stat, Top Operated Without Off-Switch (Capillary Type Sensor) Type PCN Upper Setpoint °F (°C) Different Setpoint °F (°K) Factory Setting °F (°C) Charge Type TS1-C0P TS1-D0P 097882 097885 40 TO 68 (+4.5...+20) 40 TO 68 (+4.5...+20) 5 (3) fi x man. reset ca. 5 (3) fi x 40/36 (4.5/+2) 36 (+2) VAPOR VAPOR 20 FT. (6 m.) capillary 20 FT. (6 m.) capillary K-221 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 46 EMERSON CLIMATE TECHNOLOGIES-Temperature Pressure Controls TS1 Series Single Control Sensor type E Vapor charge Sensor type F Absorption charge 2m (6.56 ft) Sensor type C Liquid charge 2m (6.56 ft) TS1-E/F Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals TS1-A/B/C/D Thermostats Indoor Air Quality Heating Components Sensor type P Vapor charge 2m (6.56 ft) K-222 Refrigeration Sensor type A Vapor charge 2m (6.56 ft) Electrical Motors Dimensional Diagrams (in) Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 47 EMERSON CLIMATE TECHNOLOGIES-Temperature Pressure Controls PS1 Series Single Control PS1 Single Pressure Controls are designed for use on high and low pressure applications in refrigeration and heat pump system s. By operating a set of electrical contacts, pressure is kept inside a certain limit. Features • Adjustable pressures and differentials • Narrow adjustable diff erential depending on model • Range and differential pointer in units bar and psig • Range and differential individually lockable by wire seal • High rated SPDT contacts for all versions • Captive terminal and cover screws • Manual toggle for system checkout and override • Factory installed wire bridge for reduced installation effort Options • Different pressure connections • Automatic and manual reset versions • Factory set to customer specification • Different types of mounting brackets Specifications • SPDT switch rated for 120 VAC/240VAC at 24FLA and 144 LRA • Agency approv als include: UL/CUL file number E85974, VDE 0631/0660, TÜV, CE 73/23/EWG, CE 93/68/EWG • Low and high pressure versions av ailable with TÜV approv al according to EN 12263 (supercedes DIN 32733) to meet requirements of DIN 8901 and EN378 (supercedes DIN 8975) Nomenclature example: PS1-A5K PS1 A Product Name PS1 = Adjustable single Pressure Contol PSA = Customer specials 5 Pressure Range Housing Variant/function A = Pressure control, automatic reset, internal range & differential adjustments W = Pressure control, automatic reset, DIN/TUV approved, internal range and differential adjustments X = Pressure control, automatic reset, external range and differential adjustments Refrigeration K Sensor Type 1 = 24” Hg to 42 psig (-0.75 to 3 bar) A = 7/16” - 20 UNF male for 3 = 15” Hg to 100 psig (-0.5 to 7 bar) 1/4” SAE male fl are 4 = 15 to 290 psig (1 to 20 bar) K* = 7/16” - 20 UNF fl are nut 5 = 90 to 450 psig (6 to 31 bar) with 1 meter (3 ft.) cap tube *Controls with housing variant X have extended copper ends, without Schrader valve depressor. All other housing variants have Schrader valve depressor and brass end fitting with copper gasket. Ordering Information Low Pressure Controls Adjustment Range Upper Setpoint (psig) Different Setpoint (psig) Single Pressure Control PCN Factory Setting (psig) Pressure Connection PS1-X1K PS1-X1A PS1-X3A PS1-X3K 097898 097894 097914 097904 24” Hg to 42 psig 24” Hg to 42 psig 15” Hg to 100 psig 15” Hg to 100 psig 4 to 29 4 to 29 7 to 73 7 to 73 7/15 7/15 50/65 50/65 Capillary Nut 7/16” -20 UNF, 1/4” SAE male 7/16” -20 UNF, 1/4” SAE male Capillary Nut Single Pressure Control PCN PS1-X4K PS1-X5K PS1-Y5A PS1-Y5K 097901 097908 097923 097911 Upper Setpoint (psig) Different Setpoint (psig) Factory Setting (psig) Pressure Connection 15” Hg to 290 psig 90” Hg to 450 psig 90” Hg to 450 psig 90” Hg to 450 psig 15 to 100 29 to 217 Ext. Manual Reset Ext. Manual Reset 145/115 230/290 50 50 Capillary Nut Capillary Nut 7/16” -20 UNF, 1/4” SAE male Capillary Nut High Pressure Contols Dimensional Diagram (in) Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-223 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 48 EMERSON CLIMATE TECHNOLOGIES-Temperature Pressure Controls PS2 Series Dual Control PS2 Dual Pressure Controls are designed for use on high and low pressure applications in refrigeration and heat pum p systems. By operating a set of electrical contacts, pressure is kept inside certain lim its. PS2 = Adjustable Dual Pressostat PSB = Customer special Version Function A =Both sides: Pressure controls, Automatic reset, Internal range and differential adjustments. L = Left side: Pressure control, Automatic reset, Internal range and differential adjustments. Right side: Pressure cut out, External manual reset, Internal range and differential adjustments. X = Both sides: Pressure controls, Automatic reset, External range and differential adjustments. Y = Left side: Pressure control, Automatic reset, External range and differential reset, External range and differential adjustments. Pressure Ranges 7 = Left side: 15” Hg to 100 psig (-0.5 to 7 bar) Right side: 90 to 450 psig (6 to 31 bar) 9 = Left side: 24” Hg to 45 psig (-.75 to 3 bar) Right side: 90 to 450 psig (6 to 31 bar) LOW PRESSURE MANUAL RESET: Cut outs with manual reset function and in combination with the low pressure side of Pressure Ranges 7 & 9 have a low pressure manual reset function (15 psig differential). HIGH PRESSURE MANUAL RESET: Cut outs with manual reset function and in combination with the high pressure side of Pressure Ranges 7 & 9 have a high pressure manual reset function (60 psig differential). A Pressure Connector Type A = 7/16” -20 UNF male for 1/4” SAE flare fitting K* = 7/16” -20 UNF flare nut with 1 meter (3 ft.) cap tube L = 1/4” ODM solder with 1 meter (3 ft.) cap tube * Controls with housing variants X/Y have extended copper ends, without Schrader valve depressor. All other housing variants have Schrader valve depressors and brass end fitting with copper gasket Ordering Information Continued Pressure Limiter/Pressure Cut Out for Low Pressure/High Pressure Protect 097954 Upper Setpoint Left psig 15” Hg to 100 PS2-Y7K 097943 15” Hg to 100 90 to 450 7 to 72 PS2-Y9K 097950 24” Hg to 45 90 to 450 4 to 29 Different Setpoint Right (psig) Convertible Auto/Manual Reset Convertible Auto/Manual Reset Convertible Auto/Manual Reset Factory Setting PSIG Left psig Right (psig) 50/65 290 Pressure Connection 7/16” -20 UNF 50/65 290 Capillary Nut 7/15 290 Capillary Nut Electrical Tools & Instruments PCN Adjustment Range Upper Setpoint Different Setpoint Right (psig) Left psig 90 to 450 7 to 72 Dual Pressure Control PS2-Y7A Heating Components 7 Oils & Chemicals Product Name Y Accessories, Supplies & Commodities PS2 Indoor Air Quality Nomenclature example: PS2-Y7A Thermostats Specifications • SPDT switch rated for 120 VAC/240VAC at 24FLA and 144 LRA • Agency approvals include: UL/CUL file number E85974, VDE 0631/0660, TÜV, CE 73/23/EWG, CE 93/68/EWG • Low and high pressure versions av ailable with TUV approval according to DIN 32733 to meet requirements of DIN 8901 and DIN 8975 K-224 Refrigeration Options • Different pressure connections • Automatic and m anual reset versions • Factory set to custom er specification • Different types of mounting brackets Motors Features • Adjustable pressures and differentials • Narrow adjustable diff erential depending on model • Range and differential pointer in units bar and psig • Range and differential individually lockable by wire seal • High rated SPDT contacts for all versions • Captive terminal and cover screws • Manual toggle for system checkout and override • Factory installed wire bridge for reduced installation effort Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 49 EMERSON CLIMATE TECHNOLOGIES-Temperature Pressure Controls FD113-ZUK Oil Pressure Safety The FD113 Oil Pressure Safety Control senses the effective oil pressure on pressure lubricate com pressors. If inadequate oil pressure exists, a time delay is energized. If the oil pressure does not recover to safe levels within the time delay setting, the compressor is shut down. The time delay allows the compressor adequate time to establish oil pressure on start up and av oids nuisance shutdowns on pressure drop of short duration during the run cycle. Maximum application flexibility is assured by providing an adjustable differential pressure switch which can be adjusted to the compressor’s minimum required oil pressure needs and an adjustable electronic time delay which allows the selection of the length of time the compressor runs below the minimum pressure before shutdown. The minim um pressure setting and time delay values specified by the compressor m anufacturer should be used when installing the FD113 control. Features • Pressure range adjustable from 4 to 65 psid; Timer start pressure - timer stop pressure is 3 psid above timer start pressure • A SPDT switch is used in the pressure portion of the control which allows the addition of a “safe-light” when desired • Electronic Tim er is Tim e-Adjustable from 20 to 150 seconds Supply voltage - 24 to 240 Volt AC/DC; Timing unaffected by voltage or ambient tem perature variations • A SPDT M anual Reset Switch is used in the Timer Module; Upon tim e-out, the com pressor is stopped and an alarm circuit is energized; To restart the com pressor and deenergize the alarm circuit, the reset button is pushed • A factory installed Jumper allows the FD113 to be powered from a single source power; Should separate circuits be desired for the timer and “Lockout” switch, the Jumper can be removed Specifications • Agency approvals include: UL/CUL file number E85974, VDE 0631/0660, TÜV, CE 73/23/EWG, CE 93/68/EWG Ordering Information PCN Part Number Adjustable Pressure Range Adjustable Time Delay Supply Voltage Pressure Connection 097456 FD113–ZUK 4-65 psid 20 to 150 seconds Factory-set at 120 seconds 24 to 240V AC/DC (2) 36’’ capillary with 1/4’’ flare nu Dimensional Data (in) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-225 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 50 W 6 Function Pressure Range/Contacts A = Pressure control, automatic, high or low pressure applications (Single diaphragm option, 158° F rating, Range 1-5 only, without snubber) (Bellows option, 300° F rating, with snubber, Range 6 only) B = Pressure cut-out, external manual reset, DIN/TUV approved (Double diaphragm option,158° F, without snubber, Range 1-5) (Bellows option, 300° F rating, with snubber, Range 6 only) R = Pressure control, external manual reset, high or low pressure applications (Single diaphragm option, 158° F rating, Range 1-5 only, without snubber) (Bellows option, 300° F rating,with snubber, Range 6 only) W = Pressure limiter, automatic, DIN/TUV approved (Double diaphragm option, 158° F, without snubber, Range 1-5) (Bellows option,300° F rating, with snubber, Range 6 only) K-226 S Pressure Connections Standard Contacts K = 1 m cap tube w/fl are nut 1 = Low pressure 15” Hg to 90 psig 7/16”-20 UNF (range 1-5) 5 = High pressure 100 to 465 psig L = 1/4” ODM solder w/1 m cap 6 = High pressure 145 to 623 psig tube (range 1-5) S = 7/16”-20 UNF female, Microswitch Contacts Schrader depressor J = Low pressure 15” Hg to 90 psig (range 1-6) Motors Electrical Heating Components Indoor Air Quality Thermostats Oils & Chemicals Accessories, Supplies & Commodities PSC Product Name Tools & Instruments The PSC Mini Pressure Control provides the ultim ate in reliability and flexibility in a comm ercial grade mini pressure control. A standard plug connectable design simplifies installation and service. The SPDT switch allows the addition of alarm circuits on high or low pressure applications. Models with high temperature bellows and built-in pressure pulsation snubbers m ake the PSC ideally suited for compressor head mounting high pressure limit control applications—automatic or manual reset versions are available. Pressure Ranges/Differential also make the PSC controls ideally suited for condenser fan cycling applications. Low Pressure versions with standard or narrow differential switches make these controls ideally suited low pressure limit or back-up safety controls on electronically controlled syst ems. Num erous options, such as panel mount or capillary connections are available on high volume applications. Standard on all m odels are worldwide agency approvals. Specifications Typical Applications • Worldwide Approvals: UL/CUL/VDE/TÜV • High Pressure Limit/Alarm • UL/CUL file num ber: E85974 • Condenser Fan Cycling Electrical Ratings–SPDT Switch • Low Pressure Limit/Alarm • Standard Switch – High/Low Pressure • Low Pressure Cycling (Back-Up) – Load Contact: 6 FLA – 36 LRA – 120/240 VAC • Defrost Termination/Fan Delay Pilot Duty: 240VA @ 120, 480VA @ 240 VAC • Rupture Guard Alarm – Back Contact 0.5 Amp 120/240 VAC Pilot Duty Features • Micro Switch – Low Pressure • Commercial Grade High/Low/Condenser Fan Cycling – 2.5 FLA – 15 LRA – 120/240 VAC Pressure Controls for use on Ref rigeration/AC Applications Pilot Duty: 120VA @ 120, 240VA @ 240 VAC • Mini-Size 2’’ x 1-1/2’’ x 2-3/4’’ – Back Contact 0.5 Amp 120/240 VAC Pilot Duty • Standard SPDT Switch Action • Ambient Temperature • Automatic or Manual Reset – Storage: –30° to +160°F Operating: –20° to +140°F • Models av ailable with high tem perature bellows and built• Low Pressure in pressure pulsation snubber for direct head m ount high – Single diaphragm pressure sensing/lim it applications Maximum media temperature 150°F • Plug Connectable with hub f or 1/2’’ flexible conduit • High Pressure • Factory preset to customer’s desired pressure – Bellows design specifications Maxim um m edia temperature 300°F • Precise, repeatable settings – Internal Pressure Pulsation Snubber • Narrow differential ‘‘Micro’’ switch available on low available for direct head mount pressure models Protection – Protect from rain, direct sunlight and exterior damag Switch Action Weight • SPDT Standard – Approxim ately 0.25 pound, depending upon • 1–2 Open on Rise configuration Close on Fall Compatibility • 1–4 Close on Rise – HFC, HCFC, CFC Open on Fall Agency Approvals – UL/CUL/DIN/TÜV, depending upon configuration Nomenclature exam ple: PSC-W6S Refrigeration EMERSON CLIMATE TECHNOLOGIES-Temperature Pressure Controls PSC Mini Pressure Control Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 51 Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Temperature Pressure Controls PSC Mini Pressure Control Specification Selection Table Low Pressure Controls PCN 097815 Motors 097849 Electrical PSC-A1S 15” to 90 9 Low / 15 High 5/15 Auto Pressure Connection 1/4” SAE Female with Valve Depressor 1/4” SAE Female with Valve Depressor Electrical Connetion Electrical Maximum Over Ratings Pressure DIN Plug with 1/2” NPTF Hub 2.5 FLA/15 LRA 360 PSIG for Flex Conduit Connection 36” Cable 360 PSIG DIN Plug with 1/2” NPTF Hub 6 FLA/36 LRA for Flex Conduit Connection 36” Cable PCN 097998 1 2 Type and High Event Differential Setting Reset Pressure Connection Electrical Connetion Electrical Maximum Over Description Range (PSIG) Range (PSID) Function Ratings Pressure PSC-W6S 145 to 623 72 Low / 87 320/395 Auto 1/4” SAE Female with Valve DIN Plug with 1/2” NPTF 6 FLA/36 LRA 695 PSIG High Depressor, plus stainless steel Hub for Flex Conduit bellows with snubber Connection 36” Cable PSC-B6S 145 to 623 395 Manual 1/4” SAE Female with Valve DIN Plug with 1/2” NPTF 6 FLA/36 LRA 695 PSIG 72 Low / 87 High Depressor, plus stainless steel Hub for Flex Conduit bellows with snubber Connection 36” Cable Free Standing Direct Mount Mounting Free Standing Direct Mount Free Standing Direct Mount EMERSON CLIMATE TECHNOLOGIES-Temperature Pressure Controls PSC Setting Capabilities Thermostats Indoor Air Quality T he PSC is factory preset. F or special applications, these controls can be f actory preset to other val ues as ill ustrated on the appropri ate graphs. Micro-Switch Setting Cap ability Standard Switch Setting Capability Pressure Rang e = 6 Pressure Range = J Standard -Switch Setting Cap ability Pressure Ran ge = 1 Stand ard-Switch Setting Capability Pressure Rang e = 5 Accessories, Supplies & Commodities Oils & Chemicals Free Standing Direct Mount Micro-Switch Construction. All switches SPDT ratings stated are 1 side only 120/240 VAC. Opposite switch side – 1/2 am p pilot duty 120/240. Tools & Instruments Refrigeration Mounting High Pressure Contols 097793 Heating Components Type and High Event Differential Setting Reset Description Range (PSIG) Range (PSID) Function 15” to 90 4 Low / 7 High 1.5/6 Auto K-227 Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 52 Nomenclature example: FSX-41S X Fan Speed Series Control 4 1 Pressure Range Max. Current Rating 4 = 4 Amps maximum at 104°F ambient temperature S Pressure Range Modulating Band Factory Setting 1 = 6.5 to 15 bar (95 to 220psig) 2 = 13 to 25 bar (190 to 360 psig) 3 = 12.4 to 28.4 (180 to 411 psig) 35 psig 55 psig 66 psig 11 bar (160 psig) 16.2 bar (235 psig) 21.8 bar (316 psig) Pressure Connection S = 1/4” SAE female (7/16” -20 UNF) with Schrader Depressor Ordering Information PCN Adjustable Range (PSI) Modulating Band (PSI) Factory Setting (PSI) Pressure Connection 097993 097774 190 to 360 180 to 411 55 66 235 316 7/16” -20 UNF Female 7/16” -20 UNF Female Parts/Accessories TYPE 097995 097775 FSF-N15 Cable (EMC) FSO-N15 Cable (standard) Motors Electrical Heating Components Indoor Air Quality Tools & Instruments PCN K-228 Refrigeration FS Thermostats The FSX is designed for use with permanent split capacitor and shaded pole fan motors, approved for use by motor/equipment manufacturers for variable voltage, phase angle (triac) speed control. Features Specifications 0.2 to 4 Amp max up to 104°F (40°C) • Connector includes 2 m. cable installed (FSF and • Nominal current: 0.2 to 2.5 Amp max up to 140°F (60°C) FSO) Starting current: max. 8 Amp • Connector turnable (in 90° steps) • Temperature Range • Compact Design Storage and • State–of–the–Art Electronics transportation: -30°C to 70°C • Direct mount—Easily retrofit to suitable motor Ambient temperature: -20°C to 55°C • Low Pressure “Turn Off” Operation Medium temperature: -20°C to 70°C • Adjustable Pressure Setting Control • Pressure Operated Fan Speed • Multiple FSX controls can be used in parallel on • Supply Voltage: 230V AC + 15-20%. multi–circuit condensers • Protection: Provide an ultimate enclosure to • 2 Cable types: protect from direct rain, sunlight and FSF-N15 with internal circuit design to comply external damage. with EC-Directive 89/336/EC (Electromagnetic • Weight: 3-1/2 ounces compatibility requirements for Europe) • Approvals: UL/CUL file number E183816 FSO-N15, standard with internal voltage spike and CE Low Voltage Directive 72/23/EC over current protection Connector per DIN 43650 Options • Custom Calibration • Other Operating Voltages/Pressure Ranges Oils & Chemicals The FSX Fan Speed Control controls the head pressure in air– cooled condensers by reducing the fan speed to maintain head pressure as the outside temperatures/condenser pressure drops. As the motor speed drops under lower ambient/load condition fan noise is also reduced. Accessories, Supplies & Commodities EMERSON CLIMATE TECHNOLOGIES-Temperature Pressure Controls FSX Electric Fan Speed Control Compressors, Chillers, Condensers Refrigeration Sec#10 Refridge 53pages 2011_Fridge 12/10/2010 12:32 PM Page 53 Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EMERSON CLIMATE TECHNOLOGIES-Temperature Pressure Controls FF444 Industrial Pressure Control The FF444 Industrial Pressure Controls are general purpose switches suitable for oil, water and air at pressures up to 465 psig. Typical Applications • Industrial Pressure Control • Pneumatic and Hydraulic System s • Oil Lubrication Systems • Pump/Compressor Control Features • SPDT snap-action contacts • Independent adjustable upper and lower switching pressures • Diaphragm-type control for low pressure applications (Buna N diaphragm): • resistant to mineral oils • medium tem peratures up to 160°F • Transparent polyamide hood – U.V. resistant • Surface mounted Type 4 enclosure • Optional manual reset locking on pressure rise Options • Optional manual reset locking on pressure rise Description Maximum motor rating single phase Motor rated, FLA Motor rated, LRA Thermostats Industrial Pressure Control V1 V4 Oils & Chemicals V5 Lower Switch Point Range 0.5-27 psig 0.04-1.89 bar 6-217 psig 0.4-15 bar 12-435 psig 0.8-30 bar V2 Upper Switch Smallest Differential @ Point Range Lower-Higher end of Range 1.5-29 psig 1-1.5 psig 0.11-2 bar 0.07-0.11 bar 15-232 psig 9-14 psig 1-16 bar 0.6-1 bar 29-464 psig 17-29 psig 2-32 bar 1.2-2 bar 120VAC 240VAC 1/2 hp 1 -1/2 hp 10 A 60 A 10 A 60 A Standard Settings 7/22 psig 0.5/1.5 bar 58/174 psig 4/12 bar 145/290 psig 10/20 bar D R Valve Design Reset Type D = Diaphragm Ordering Information PCN Description 097308 097311 097312 097379 FF444-V1-DAF FF444-V4-DAF FF444-V5-DAF FF444-V4-DRF Dimensional Data (in) Tools & Instruments Refrigeration 5 A (B300) 300 VAC maximum –10°F to +120°F + 160°FMax. (4 Hz to 1000 Hz) 4g 1.1 lbs. E85974 Nomenclature example: FF444-V2-DRF FF444 Accessories, Supplies & Commodities Specifications • Control circuit rating: • Rated voltage: • Ambient operating temperature: • Medium temp. at pressure element: • Resistance to vibration: • Weight: • UL/CUL f ile number: K-229 F Pressure Connection A = Auto R = Manual, A = 7/16”-20 UNF male Locking on Pressure F = 1/4”-18 NPTF Rise Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 1 Refrigeration Compressors, Chillers, Condensers FURNAS CONTACTORS Power Terminations options: Lugs SEMS Clamp Binding Head Screws (standard) Indoor Air Quality Thermostats FEATURES & BENEFITS: • Compact Size • Welded resistant Silver Cadmium Oxide contacts • Reinforced Thermoset Polyester Housing • Low VA Coils Standard 25-40 FLA • Snap-On Electrical/Mechanical Interlocks • DC and Dual Voltage coils available • Dual Quick Connects on the coil Meets: ARI-780 UL File E 14900 CSA File LR6535 CE Approved PART NO POLES FULL LOAD AMPS 42BF15AF 42BF15AG 42BF15AJ 42BF25AG 42BF35AF 42BF35AG 42BF35AJ 42CF15AF 42CF15AG 42CF15AJ 42CF25AF 42CF25AJ 42CF35AF 42CF35AG 42CF35AJ 42DF35AF 42DF35AG TWO POLE TWO POLE TWO POLE FOUR POLE THREE POLE THREE POLE THREE POLE TWO POLE TWO POLE TWO POLE FOUR POLE FOUR POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE 30 30 30 30 30 30 30 40 40 40 40 40 40 40 40 50 50 K-230 Oils & Chemicals Meets: ARI-780 UL File E 14900 CSA File LR6535 CE Approved thru 60A COIL VOLTAGE 110 208/240 24 208/240 120 208/240 24 120 208/240 24 110 24 120 208/240 24 120 208/240 Accessories, Supplies & Commodities FEATURES & BENEFITS: • Compact Size • Welded resistant Silver Cadmium Oxide contacts • Reinforced Thermoset Polyester Housing • Quiet Operation • Contact covers and taped coils standard on all Class 45’s Tools & Instruments Definite Purpose Contactors Class 42 Refrigeration Definite Purpose Contactors Class 45 Heating Components Electrical Motors DEFINITE PURPOSE CONTACTORS CLASS 42 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 2 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration FURNAS CONTACTORS DEFINITE PURPOSE CONTACTORS CLASS 42 PART NO 42DF35AJ 42EF35AF 42EF35AG 42EF35AH 42EF35AJ 42FE35AF106 42FE35AG106 42FE35AH106 42FE35AJ106 42GE35AF106 42GE35AG106 42GE35AH106 42GE35AJ106 42HF35AF 42HF35AG 42HF35AH 42IF35AF 42IF35AG 42IF35AH POLES FULL LOAD AMPS THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE THREE POLE 50 60 60 60 60 75 75 75 75 90 90 90 90 120 120 120 150 150 150 COIL VOLTAGE 24 120 208/240 480 24 120 208/240 480 24 120 208/240 480 24 120 208/240 480 120 208/240 480 DEFINITE PURPOSE CONTACTORS CLASS 45 PART NO POLES FULL LOAD AMPS 45EG10AF 45EG10AG 45EG10AJ 45DG20AF 45DG20AG 45DG20AJ 45GG20AF 45GG20AG 45GG20AJ 45EG20AF 45EG20AG 45EG20AJ 45AF35AF 45AF35AG 45AF35AJ SINGLE POLE SINGLE POLE SINGLE POLE TWO POLE TWO POLE TWO POLE TWO POLE TWO POLE TWO POLE TWO POLE TWO POLE TWO POLE THREE POLE THREE POLE THREE POLE 30 30 30 25 25 25 40 40 40 30 30 30 25 25 25 COIL VOLTAGE 120 208/240 24 120 208/240 24 120 208/240 24 120 208/240 24 120 120 24 ACCESSORIES ACCESSORIES DESCRIPTION 49ACRO 49ACRC 49ACR6 49D36098001 49D36098003 49D22125001 49D22125002 49CE42SPDT 49D54682NO 49D54682NC AUX. CONTACTS 20-60A 1NO AUX. CONTACTS 20-60A 1NC AUX. CONTACTS 20-60A 1NO & 1NC AUX. CONTACTS 20-60A 1 SPDT AUX. CONTACTS 20-60A 2 SPDT AUX. CONTACTS 75-90A 1NO AUX. CONTACTS 75-90A 1NC AUX. CONTACTS 75-90A 1SPDT AUX. CONTACTS 120-150A 1NO AUX. CONTACTS 120-150A 1NC * This listing represents the most popular models. There are numerous variations in application. If you require models not listed please contact RCD Commercial Refrigeration for assistance. K-231 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 3 Compressors, Chillers, Condensers Refrigeration GRASSLIN - DEFROST TIMER GRASSLIN DTMV SERIES Motors SPECIFIERS GUIDE Furnish and install a Grasslin DTMV40 defrost control which is field adjustable for 120V or 240V operation and shall have defrost initiation times settable to the quarter hour via captive trippers at 15 minute intervals. The defrost timer shall be housed in a NEMA 3R indoor/outdoor plastic enclosure. The relay output will be rated for 40A Resistive, 2HP @ 250VAC. Defrost termination to be by time (and by a remote temperature or pressure switch). 120V, 208/240V, 60Hz 120V, 208/240V, 60Hz 120V, 208/240V, 60Hz 120V, 208/240V, 60Hz 120V, 208/240V, 60Hz 120V, 208/240V, 60Hz 120V, 208/240V, 60Hz 120V, 208/240V, 60Hz 120V, 50/60Hz 208/240V, 50/60Hz NEMA 3R Outdoor Enclosure Mechanism Only Bracket Mount Panel Mount NEMA 3R Outdoor Enclosure Mechanism Only Bracket Mount Panel Mount NEMA 3R Outdoor Enclosure NEMA 3R Outdoor Enclosure Synchronous Synchronous Synchronous Synchronous Quartz Quartz Quartz Quartz Electronic* Electronic* BATTERY BACK-UP Duration N/A N/A N/A N/A 1 week 1 week 1 week 1 week 1 week 1 week DEFROST FREQUENCY DURATION NO/DAY 1 to 24 1 to 24 1 to 24 1 to 24 1 to 24 1 to 24 1 to 24 1 to 24 1 to 8 1 to 8 15-180 min. 15-180 min. 15-180 min. 15-180 min. 15-180 min. 15-180 min. 15-180 min. 15-180 min. 1-180 min. 1-180 min. MINIMUM DURATION INTERVAL 15 minutes 15 minutes 15 minutes 15 minutes 15 minutes 15 minutes 15 minutes 15 minutes 1 minute 1 minute Standard models are also available with 50Hz input in 208/240V *Rated at 30 Amps Universal Replacement GRASSLIN = DTMV 40 8141-00 8143-00 8145-00 8041-00 8043-00 8045-00 8046-00 8047-00 8141-20 8143-20 8145-20 8041-20 8043-20 8045-20 8046-20 8047-20 8245-20* 8243-20* 8247-20* PRECISION 6141-00 6143-00 6145-00 6041-00 6043-00 6045-00 Recommended Pressure Switches: Johnson/Penn P170, Ranco 010 series, or Danfoss KP1 series. Pressure range approximately 35-110psi, Cut-in on pressure rise 6047-00 6141-20 6143-20 6145-20 6041-20 6043-20 6045-20 Tools & Instruments PARAGON Indoor Air Quality TIMER Thermostats MOUNTING Oils & Chemicals DTMV40 DTMV40-M DTMV40-B DTMV40-P DTQMV40 DTQMV40-M DTQMV40-B DTQMV40-P DT140 Digi 20-120 DT140 Digi 20-240 VOLTAGE 6047-20 6245-20 6243-20 6247-20 K-232 Refrigeration PART NO Accessories, Supplies & Commodities Ordering Data Time Initiated, Remote Temperature, Pressure, or Time Terminated Heating Components Electrical SPECIFICATIONS Switch Rating: 40A Resistive @ 120VAC, 208~240VAC 2HP @ 208~240VAC; 1HP @ 120VAC 16FLA, 90LRA @ 120VAC 12FLA, 52LRA @ 240VAC “F” Terminal: 30A Resistive @ 120~240VAC 1HP @ 120VAC; 2HP @ 208~240VAC Wiring Connections: Screw box lug terminals accommodate up to four #8 AWG wires. Environmental Ratings: Operating Temperature Range: –40°F to 131°F (–40°C to 55°C) Operating Humidity: 0 to 95% non-condensing Dimensions: 8.795” x 6.631” x 2.935” (H x W x D) Shipping Weight: 2 lbs. Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 4 GRASSLIN - GENERAL PURPOSE TIMER GM40 Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration • • • • • • • • • • • PART NO GM40 GM40QW GM40W DESCRIPTION VOLTAGE OUTPUT 24-HOUR ELECTROMECHANICAL, MULTI-VOLTAGE, SPDT, NEMA 3R OUTDOOR ENCLOSURE 24-HOUR ELECTROMECHANICAL, MULTI-VOLTAGE, SPDT, NEMA 3R OUTDOOR ENCLOSURE 7-DAY (SKIP-A-DAY/WEEKLY) ELECTROMECHANICAL MULTI-VOLTAGE, SPDT/DPDT, NEMA 3R OUTDOOR ENCLOSURE 7-DAY (SKIP-A-DAY/WEEKLY) ELECTROMECHANICAL MULTI-VOLTAGE, SPDT/DPDT, NEMA 3R OUTDOOR ENCLOSURE 120, 208-240, 277VAC 40A DPDT BATTERY BACKUP NO 120, 208-240, 277VAC 40A DPDT YES 120, 208-240, 277VAC 40A DPDT YES 120, 208-240, 277VAC 40A DPDT NO Refrigeration Tools & Instruments Accessories, Supplies & Commodities GM40Q Amber and Green LED Lights Indicate Power and Status Easy Multi-Voltage Field Adjustable DIP Switch for 120, 208/240 or 277 VAC New Compact VALOX® NEMA 3R Outdoor Enclosure Replaces All Metal Enclosures Large Screw Terminals for Easy Wiring #8 AWG Ground Lug Termination Captive Trippers Can’t Be Lost Independently Adjustable Trippers at 15 Minute Intervals Real Time Clock Face NO TOOLS REQUIRED! Our “GUTS” simply snap into existing Grasslin or Intermatic enclosures 40 Amp Rated Contacts Moisture Resistant Conformal Coated Board K-233 WILL REPLACE GM1ST-I-MV & GMDST-I-MV GM1QT-I-MV & GMDQT-I-MV GM1QW-I-MV & GMDQW-I-MV GM1SW-I-MV & GMDSW-I-MV Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 5 Part Number Voltage Output Battery Backup GMXQT-I-120 120VAC, 50/60 Hz 21A SPDT Yes GMXQT-I-24 24VAC, 50/60 Hz; 12 - 24 VDC 21A SPDT Yes GMXQT-I-240 240VAC, 50/60 Hz 21A SPDT Yes GMXQT-O-120 120 VAC, 50/60 Hz 21A SPDT Yes GMXQT-O-120 120 VAC, 50/60 Hz 21A SPDT Yes GMXQT-O-24 24 VAC, 50/60 Hz; 12 - 24 VDC 21A SPDT Yes GMXQT-O-240 240 VAC, 50/60 Hz 21A SPDT Yes GMXQW-I-120 120 VAC, 50/60 Hz 21A SPDT Yes GMXQW-I-24 24 VAC, 50/60 Hz; 12 - 24 VDC 21A SPDT Yes GMXQW-I-240 240 VAC, 50/60 Hz 21A SPDT Yes GMXQW-O-120 120 VAC, 50/60 Hz 21A SPDT Yes GMXST-I-120 120VAC, 60 Hz 21A SPDT No GMXST-I-24 24VAC, 60 Hz 21A SPDT No GMXST-I-240 240VAC, 60 Hz 21A SPDT No GMXST-O-120 120 VAC, 60 Hz 21A SPDT No GMXST-O-24 24 VAC, 60 Hz 21A SPDT No GMXST-O-240 240 VAC, 60 Hz 21A SPDT No GMXSW-I-120 120VAC, 60 Hz 21A SPDT No GMXSW-I-24 24 VAC, 60 Hz 21A SPDT No GMXSW-I-240 240 VAC, 60 Hz 21A SPDT No GMXSW-O-120 120 VAC, 60 Hz 21A SPDT No GMXSW-O-24 24 VAC, 60 Hz 21A SPDT No GMXSW-O-240 240 VAC, 60 Hz 21A SPDT No K-234 Motors Electrical Heating Components Indoor Air Quality FEATURES • 21 Amp. Rating • NEMA 1 Indoor or 3R Outdoor Enclosure • SPDT Switch • Captive trippers with intervals of 15 minutes on 24-hour models (2hours on 7-day models) • True clock face, easy to set • Finger safe terminals • Enclosure provides space for field added contactor or other accessories. Thermostats APPLICATION The GMX is a light duty commercial time switch ideal for 24, 120, or 277 VAC single phase applications such as: • Lighting Control • Access Control • Heating, Air-Conditioning • Agricultural Facilities • Pumps/Motors/Fan Control • General Electrical Circuits Oils & Chemicals The GMX Series Time Controls are universal, electromechanical time switches. They are a low cost alternative for applications that do not require more than 21A or 2HP @240VAC. The unit is mounted in a NEMA 1 Indoor or NEMA 3R Outdoor enclosure. Accessories, Supplies & Commodities GMX Series (24-Hour / 7-Day) Tools & Instruments 24-Hour Refrigeration GRASSLIN - GMX SERIES (24-Hour, 7-Day) Compressors, Chillers, Condensers Refrigeration Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 6 GRASSLIN - MIL 72 SERIES (24-Hour, 7-Day) 24-HOUR TIME CONTROL Time based control of lighting, ventilating, heating, cooling or other electrical loads in commercial and industrial applications. The MIL 72 time switches are available with a 24-hour or 7-day program dial with a SPDT switch (form “C” contact). The MIL 72A series is intended for surface mounting. The control is completely enclosed in a plastic housing and includes a terminal cover and sub-base for installation and hard wiring. The MIL 72E is intended for flush (panel) mounting. All units are supplied with a clear plastic cover. Motors Compressors, Chillers, Condensers Refrigeration Complete Part Number = MIL 72A or E Followed by Suffix Code and Voltage. Example: MIL 72A STuZ-24 SYNCHRONOUS WITHOUT OVERRIDE WITH 3-WAY OVERRIDE STuZ-24 STuZ-120 STuZ-240 STuZH-24 STuZH-120 STuZH-240 STuZH-277 QUARTZ 7-DAY CARRY-OVER**With 3-Way Override QTuZH-24 QTuZH-120 QTuZH-240 -- INPUT VOLTS Refrigeration SWITCH RATING 240 V MINIMUM ON/OFF TIME RES 24 VAC 120 VAC 208/240 VAC 277 VAC SPDT 21A SPDT 21A SPDT 21A SPDT 21A 15 min. 15 min. 15 min. 15 min. EVENT ON/OFF TIME ON 1/4 hr. ON 1/4 hr. ON 1/4 hr. ON 1/4 hr. 7-DAY TIME CONTROL MIL 72A — Surface Mount SYNCHRONOUS WITHOUT OVERRIDE WITHOUT 3-WAY OVERRIDE SWuZ-24 SWuZ-120 SWuZ-240 -- SW7ZH-24 SWuZH-120 SWuZH-240 SWuZH-277 MIL 72E — Flush Mount QUARTZ 7-DAY CARRY-OVER**With 3-Way Override QWuZH-24 QWuZH-120 QWuZH-240 -- INPUT VOLTS 24 VAC 120 VAC 208/240 VAC 277 VAC **Quartz units also operate on DC voltages down to 12 VDC. Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical FEATURES • Synchronous drive or quartz drive with battery backup • 21A SPDT switch • Captive trippers with interval as low as 15 minutes • With or without 3-way override • Real clock face • Surface, flush, or DIN rail mount K-235 SWITCH RATING 240 V MINIMUM ON/OFF TIME RES SPDT 21A SPDT 21A SPDT 21A SPDT 21A 2 hr. 2 hr. 2 hr. 2 hr. EVENT ON/OFF TIME ON 2 hr. ON 2 hr. ON 2 hr. ON 2 hr. Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 7 PART NO KM2 ST-CS KM2 STu-1G KM2 ST-2G KM2 STu-2G KM2 ST-3G KM2 ST-4G KM2 ST-2D KM2 ST-3D KM2 ST-2R KM2 STST-2G WALLPLATE CONFIGURATION SWITCH 1 Gang 1 Gang, 3 Way 2 Gang, Toggle 2 Gang, Toggle, 3 Way 3 Gang, Toggle 4 Gang, Toggle 2 Gang, Decorator 3 Gang, Decorator 2 Gang, Receptacle 2 Gang, Dual Timers SPST SPDT SPST SPDT SPST SPST SPST SPST SPST (2) SPST WALLPLATE CONFIGURATION SWITCH 1 Gang 1 Gang, 3 Way 2 Gang, Toggle 3 Gang, Toggle 4 Gang, Toggle 2 Gang, Decorator 3 Gang, Decorator 2 Gang, Receptacle 2 Gang, Dual Timers SPST SPDT SPST SPST SPST SPST SPST SPST (2) SPST 7-DAY PART NO KM2 SW-1G KM2 SWu-1G KM2 SW-2G KM2 SW-3G KM2 SW-4G KM2 SW-2D KM2 Sw-3D KM2 SW-2R KM2 SWSW-2G K-236 Electrical Heating Components Indoor Air Quality SPECIFICATIONS • SWITCH RATING: o 20A @ 120VAC, 60Hz o 2400W Resistive o 8A Inductive o 1HP @ 120VAC o 1350W Tungsten • ENVIRONMENTAL RATINGS: o Operating Temperature Range: –40°F to 180°F (–40°C to 85°C) o Operating Humidity: 0 to 95% noncondensing • WIRING CONNECTIONS: o (3) #14AWG color coded lead wires o Hot – Black o Switched – Red o Neutral – White Thermostats FEATURES • Captive trippers with 20 minute switching interval (2-1/3 hr. for 7 day) • SPST 20A, 1HP @ 120V switch • Replaces standard wall switches • Multiple plates available • Reliable synchronous timer motor • Easy wiring and installation • Works with fluorescent and compact fluorescent lights Oils & Chemicals Replaces standard wall switch (toggle) to provide automatic control of outdoor or indoor lighting, fans, pumps, office machines, and other types of circuits. Captive trippers are easy to set, can’t be lost. 72 trippers provide up to 36 ON/OFF events in 24 hour period. Three way, OFF/AUTO/ON override switch provides continuous ON or OFF positions. UL Listed. Accessories, Supplies & Commodities KM2 In-Wall Timer 24-Hour, 7 Day Tools & Instruments 24-HOUR Refrigeration GRASSLIN - KM2 IN-WALL TIMER (24-Hour, 7-Day) Motors Compressors, Chillers, Condensers Refrigeration Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 8 GRASSLIN - GMX digi SERIES (24-Hour, 7-Day) • 16A @ 240V switch. • Indoor or outdoor enclosure. • Rechargeable battery backup with 1 week or more carryover. • Optional clear cover allows viewing timer clock face without opening cover. Enclosure Options, Substitute the Following for “X”: “I” = NEMA 1 Indoor Enclosure “IC” = NEMA 1 Indoor Enclosure with Clear Cover “O” = NEMA 3R Outdoor Enclosure “OC” = NEMA 3R Outdoor Enclosure with Clear Cover “IM” = NEMA 1 Indoor Metal Enclosure NOTE: 6 V and 12 VDC Models Available PART NO GMX digi 20-“X”-120 GMX digi 20-“X”-240 GMX digi 20-“X”-24 GMX digi 20-“X”-277 GMX digi 42-“X”-120 GMX digi 42-“X”-240 GMX digi 42-“X”-24 GMX2 digi 42-“X”-120† GMX2 digi 42-“X”-240† GMX2 digi 42-“X”-24† SWITCH AMPS 120 V, 50/60 Hz 208/240 V, 50/60 Hz 24 V, 50/60 Hz 277 V, 50/60 Hz 120 V, 50/60 Hz† 208/240 V, 50/60 Hz† 24 V, 50/60 Hz† 120 V, 50/60 Hz 208/240 V, 50/60 Hz 24 V, 50/60 Hz SPDT SPDT SPDT SPDT SPDT SPDT SPDT (2) SPDT (2) SPDT (2) SPDT 16 16 16 16 16 16 16 16 16 16 PROGRAMS 20 20 20 20 42 42 42 42 42 42 Digi 42/2 Series 24-Hour and/or 7-Day Application: This unit can be used to control 240VAC two-phase loads such as pumps, compressors, etc. It can also be used to provide time based control of two circuit lighting, ventilating, heating, cooling or other electrical loads in commercial and industrial applications. The Digi 42/2 time switches are programmable for 24-hour or 7-day schedules as well as an “8th day” or holiday schedule. Each channel can operate independently or combined. Features: • 24 hour or 7 day programming with resolution to the minute and accuracy to the second • Large keys ease programming • Unique circular programming pattern and minimal steps simplify programming • Automatic Daylight Saving Time changeover in Spring and Fall eliminates need to manually change the time • Holiday, or “8th day” program may be scheduled a week in advance for one or more days • Each channel may be programmed separately, or both together • Automatically recharged NiCad battery maintains program and display for two weeks or more • Manual override for each channel provides for either temporary or continuous ON or OFF state, with status displayed in large LCD Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments Refrigeration TIMER VOLTAGE GRASSLIN - digi 42/2 (24 HOUR, 7-DAY) Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration PART NO Digi 42/2-120†† Digi 42/2-240† Digi 42/2-24† TIMER VOLTAGE MOUNTING* SETPOINT PROGRAMS 120 V, 50/60 Hz 240 V, 50/60 Hz 24 V, 50/60 Hz Flush or Surface Flush or Surface Flush or Surface 42 42 42 K-237 MAXIMUM WEEKLY ON/OFF RELAY OUTPUT GENERAL EVENTS PURPOSE RATING 294 (2) SPDT, 16 A, 240 VAC 294 (2) SPDT, 16 A, 250 VAC 294 (2) SPDT, 16 A, 250 VAC Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 9 GRASSLIN - digi 20, digi 42 SERIES (24-Hour, 7-Day) • Automatic Daylight Time changeover with Digi 42 • Holiday program with Digi 42. • Rechargeable battery backup with 1 week or more carryover. • 16 amp, SPDT switching. ] 120 V, 50/60 Hz 208/240 V, 50/60 Hz 24 V, 50/60 Hz 277 V, 50/60 Hz 120 V, 50/60 Hz 208/240 V, 50/60 Hz 24 V, 50/60 Hz 120 V, 50/60 Hz 208/240 V, 50/60 Hz 24 V, 50/60 Hz 277 V, 50/60 Hz 120 V, 50/60 Hz 208/240 V, 50/60 Hz 24 V, 50/60 Hz Surface or DIN Rail Surface or DIN Rail Surface or DIN Rail Surface or DIn Rail Surface or DIN Rail Surface or DIN Rail Surface or DIn Rail Flush Panel Flush Panel Flush Panel Flush Panel Flush Panel Flush Panel Flush Panel 20 20 20 20 42 42 42 20 20 20 20 42 42 42 MAXIMUM WEEKLY ON/OFF RELAY OUTPUT GENERAL EVENTS PURPOSE RATING 140 SPDT, 16 A, 250 V 140 SPDT, 15 A, 250 V 140 SPDT, 16 A, 250 V 140 SPDT, 16 A, 250 V 294 SPDT, 16 A, 250 V 294 SPDT, 16 A, 250 V 294 SPDT, 16 A, 250 V 140 SPDT, 16 A, 250 V 140 SDPT, 16 A, 250 V 140 SPDT, 16 A, 250 V 140 SPDT, 16 A, 250 V 294 SDPT, 15 A, 250 V 294 SDPT, 16 A, 250 V 294 SPDT, 16 A, 250 V GRASSLIN - FM/1 SERIES (24-Hour, 7-Day) Oils & Chemicals Thermostats The FM/1 series modules are designed to be placed inside a machine control panel, circuit board, or other equipment. It offers up to 21A switching designed for control of heating, ventilating, air conditioning, refrigeration, lighting, security, circulating pumps, spas or any electrical load requiring 24-hour or 7-day scheduling. • Authentic clock face. • 21 A SPDT switch. • Captive Trippers. SWITCH OUTPUT PART NO FM/1 StuZ (synchronous) FM/1 SWuZ (synchronous) FM/1 QtuZ (quartz) FM/1 QWuZ (quartz) MINIMUM ON/OFF TIME SWITCH PROGRAM CARRY-OVER 15 minutes 2 hours 21 A Res. 21 A Res. 15 minutes 2 hours 21 A Res. 21 A Res. NOTES: 1. Available with 24 V, 120 V, 240 V, 277 VAC input. Type Rating No No PROGRAM ON/OFF EVERY 15 minutes 2 hours SPDT SPDT 21 A Res. 21 A Res. 7 day 7 day 15 minutes 2 hours SPDT SPDT 21 A Res. 21 A Res. 2. Quartz also available with 12 V, 30 V, 60 V, or 120 VDC input. K-238 Heating Components SETPOINT PROGRAMS Accessories, Supplies & Commodities MOUNTING* Tools & Instruments Digi 20A — 120 Digi 20A — 240 Digi 20A — 24 Digi 20A — 277 Digi 42A — 120† Digi 42A — 240† Digi 42A — 24† Digi 20E — 120 Digi 20E — 240 Digi 20E — 24 Digi 20E — 277 Digi 42E — 120† Digi 42E — 240† Digi 42E — 24† TIMER VOLTAGE Refrigeration PART NO Indoor Air Quality ON ALL MODELS MARKED WITH “†” Electrical Motors C.E.C. CERTIFIED TITLE 24, PART 6 Compressors, Chillers, Condensers Refrigeration Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 10 GRASSLIN - FM/1 digi 20-120 (24 Hour, 7-Day) The FM/1 digi 20 is a compact electronic 24 hour/ 7 day time switch module with heavy duty relay contacts for switching low or line voltage loads. Applicable for time of day control of pumps, fans, heaters, HVAC control circuits, lighting, machinery and many other types of commercial, industrial,and agricultural equipment. The FM/1 digi 20 features large keys with unique “circular pattern” for easy programming, an easy-to-read LCD display and capacitor backup to retain program memory during power outages. • 20 programs, up to 140 events per week. • Easy to program with large keys. • 16 Amp @ 277 V SPDT switching. • Capacitor backup with 5-day carryover. • Manual override. GRASSLIN - FM/1 digi 42-120 (24 Hour, 7-Day) The FM/1 digi 20 is a compact electronic 24 hour/ 7 day time switch module with heavy duty relay contacts for switching low or line voltage loads. Applicable for time of day control of pumps, fans, heaters, HVAC control circuits, lighting, machinery and many other types of commercial, industrial,and agricultural equipment. The FM/1 digi 20 features large keys with unique “circular pattern” for easy programming, an easy-to-read LCD display and capacitor backup to retain program memory during power outages. • 20 programs, up to 140 events per week. • Easy to program with large keys. • 16 Amp @ 277 V SPDT switching. • Capacitor backup with 5-day carryover. • Manual override. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-239 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 11 Refrigeration Compressors, Chillers, Condensers GRASSLIN - KLT SERIES COUNTDOWN/TWIST TIMERS SPRING WOUND INTERVAL/COUNTDOWN TIME SWITCH HOLD MODELS WITH IVORYKNOB & PLATE TIME CYCLE KLT-5MH KLT-15MH KLT-30MH KLT-60MH KLT-2HH KLT-4HH KLT-6HH KLT-12HH 0-5 Minutes 0-15 Minutes 0-30 Minutes 0-60 Minutes 0-2 Hours 0-4 Hours 0-6 Hours 0-12 Hours Indoor Air Quality Example: KLT-30M-W — Add “-W” to above for white knob and plate. Example: KLT-30MH-A — Add “-A” to above for aluminum plate and plastic knob. GRASSLIN - ET 616 ELECTRONIC COUNTDOWN TIMER Electronic version of the manual countdown timer. Operates on 120 V or 277 VAC — No neutral wire required. Mounts in standard wallbox. Single button On/Off operation. Backlighted LCD display. Preset time countdown; 5, 15, 30, 60 minutes, 3, 6, 9, 12 hours. Switch holds position during a power failure (on or off), restarts at preset time when power is restored. • UL and cUL listed. SWITCH RATING 120 or 277 VAC, 50/60 Hz 1000 W (Tung.) @ 120 V;800 W (Bal.) @ 120 V;1500W (Tung.) @ 277 V;1200W (Bal.) @ 277 V COUNTDOWN TIMING 5, 15, 30, 60 Min.3, 6, 9, 12 Hr. Oils & Chemicals VOLTAGE ET616-CS Tools & Instruments PART NO Thermostats • • • • • • • Accessories, Supplies & Commodities KLT-5M KLT-15M KLT-30M KLT-60M KLT-2H KLT-4H KLT-6H KLT-12H Heating Components PART NO NO-HOLD MODELS WITH IVORYKNOB & PLATE Electrical Motors Timing ranges from 5 minutes to 12 hours. SPST 20 A, 2 HP switch. Decorator style dial plate fits both standard and decorator wallplates. Aluminum wallplate available. Fits in single or multigang wallboxes. May be flush panel mounted. Normally closed version (15 and 30 min. only) K-240 Refrigeration • • • • • • • Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 12 GRASSLIN - ET724 Electronic In-Wall Timer 24 Hour, 7 Day Replaces standard wall switch (toggle) to provide automatic control of outdoor or indoor lighting, fans, pumps, office machines, and other types of circuits. The unit can be programmed for 7-ON and 7-OFF events daily or weekly. AUTO and Manual Modes are clearly displayed along the time of day. The ET724 is designed to be mounted in a standard decorator plate for a sleek modern look. FEATURES • Sleek profile • Easy to program • Single push-button control • Mounts in standard wallbox • Built-in rechargeable battery never needs replacement Electrical Motors Compressors, Chillers, Condensers Refrigeration Heating Components SPECIFIERS GUIDE: Furnish and install a Grasslin model ET724 electronic in-wall 7 day time control. The timer shall fit into a standard 2-1/2” deep single or multigang wall box and decorator style wallplate. It shall not protrude from the wall more than 1/8” and have a captive cover plate over the programming keys. The unit shall be capable of switching a 20 amp ballast or general purpose load or 1 HP motor and have seven independently programmable events. The battery backup will be a rechargeable NiMh type that does not require replacement. ORDERING DATA PART NO ET724 DESCRIPTION WALLPLATE CONFIGURATION SWITCH Electronic 24-hr./7-day (White) 1 Gang Decorator (Not Included) SPST Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality SPECIFICATIONS Input: 120VAC, 60 Hz Switch Rating: 20A Ballast Switch Rating @ 120VAC, 20A Inductive Switch Rating @ 120VAC,2400W Resistive, 1HP Motor Operating Temperature: 32° to 122°F (0° to 50°C) Faceplate Color: White Timing Accuracy: Less Than 1% Deviation Wiring Connections: 6” Leadwires Tools & Instruments Refrigeration • LCD display • Flush mounted design • Non-volatile memory • Captive cover plate • UL Listed and CSA Approved K-241 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 13 Refrigeration Compressors, Chillers, Condensers GRASSLIN - T25/16 PLUG-IN TIMER FEATURES • 24 hour electromechanical plug-in timer • Captive trippers • Programming resolution of 15 minutes • Easy to program • Manual override ORDERING DATA SWITCH PROGRAM RESERVE PROGRAM ON/OFF EVERY 24 hour No 15 minutes SHORTEST SWITCHING TIME 15 minutes SPECIFICATIONS: Voltage: 110-120VAC Switch Rating: 15A Resistive Ambient Temperature Range: 14°F to 122°F Grounded 3-conductor plug and receptacle ORDERING DATA PART NO SWITCH PROGRAM RESERVE PROGRAM ON/OFF EVERY T35/16-CS 24 hour No 15 minutes SHORTEST SWITCHING TIME 15 minutes FEATURES • 24 hour electromechanical plug-in timer • Captive trippers • Programming resolution of 15 minutes • Heavy Duty 20A, 4800W • Manual override SPECIFICATIONS: Voltage: 240VAC, 60Hz Switch Rating: 20A Resistive Ambient Temperature Range: 14°F to 122°F Grounded 3-conductor plug and receptacle ORDERING DATA T240 SWITCH PROGRAM RESERVE PROGRAM ON/OFF EVERY 24 hour No 15 minutes K-242 SHORTEST SWITCHING TIME 15 minutes Accessories, Supplies & Commodities Oils & Chemicals GRASSLIN - T240 PLUG-IN TIMER PART NO Thermostats FEATURES • 24 hour electromechanical plug-in timer • Captive trippers • Programming resolution of 15 minutes • Easy to program • Manual override Indoor Air Quality Heating Components GRASSLIN - T35/16CS PLUG-IN TIMER Tools & Instruments T25/16 Refrigeration PART NO Electrical Motors SPECIFICATIONS: Input Voltage: 120VAC Switch Rating: 15A @ 125VAC Tungsten: 1250W, TV-4 1/3HP Polarized 2-conductor plug and receptacle Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 14 HENRY TECHNOLOGIES - SIGHT GLASSES (BULLS EYE TYPE) - MOISTURE LIQUID INDICATORS These sight glasses are available in three basic styles; Clear Lens; Reflex Lens; and Clear Lens with Floating Ball. All sight glasses feature a nickel plated steel body, hermetically sealed viewing lens, American standard tapered pipe thread, 500 PSI maximum working pressure. These sight glasses are suitable for most standard refrigerants, and other industrial fluids non-corrosive to glass and steel (for R-11 applications, an aluminum ball is available for the SG-1200’s add “C” suffix i.e. SG-1206C). Motors Compressors, Chillers, Condensers Refrigeration Clear PART NO Reflex Clear/With Ball A DIMENSIONS (in) B C THREAD SIZE (in) MPT SG-1004 SG-1006 SG-1008 SG-1010 SG-1012 SG-1016 SG-1104 SG-1106 SG-1108 SG-1110 SG-1112 SG-1116 SG-1204 SG-1206 SG-1208 SG-1210 SG-1212 SG-1216 .94 1.12 1.38 1.75 2 2.50 .90 1.06 1.32 1.25 1.41 1.28 .56 .75 .94 1.19 1.31 1.63 1/2 3/4 1 1-1/4 1-1/2 1 HENRY TECHNOLOGIES - VERTICAL ASME SUCTION LINE ACCUMULATORS - MOISTURE LIQUID INDICATORS HE: Heat Exchange models available by ordering with an HE suffix (i.e. S-7721HE). Heat Exchange models feature a boil out coil to boil off liquid refrigerant in the bottom of the accumulator. The ODS connection size of the boil out coil is shown in column E. Thermostats Indoor Air Quality Heating Components Electrical The SG-1000’s & SG-1100’s are rated for a maximum temperature of 500°F (260°C). The SG-1200's are rated for a maximum temperature of 300°F (148°C). The SG-1100’s (Reflex Lens) look dark when liquid is present and light when liquid is absent. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals *Optional: 1" FPT connection is available on S-7700 series for installation of a S-9400-1 type Liquid Level Switch. Consult factory. 1-in FPT Model* S-7722 S-7726 S-7732 PART NO Std Heat Exchanger ODS CONN A B DIMENSIONS (in) C D ODS E S-7721 S-7725 S-7731 S-7721HE S-7725HE S-7731HE 2-1/8 2-5/8 3-1/8 8-5/8 10-3/4 12-3/4 23.13 22.75 25 3.50 4.63 5.50 5.50 5.50 5.88 7/8 1-3/8 1-3/8 REFRIGERANT HOLDING REFRIGERANT RECOMMENDED TONS REFRIGERATION AT SUCTION EVAPORATING TEMPERATURE (°F) CAP. (lb 0°F sat) R-134a R-22 R-404A/R-507 R-404a/ R-134a R-22 +40°F +20°F +0°F -20°F -40°F +40°F +20°F +0°F -20°F -40°F +40°F +20°F +0°F -20°F -40°F R-507 S-7721 32.5 30 27 MAX 43.0 25.1 15.6 9.3 5.2 60.4 41.8 27.6 17.7 10.8 64.7 42.5 27.6 17.1 10.1 MIN 7.7 4.5 2.8 1.7 0.9 10.9 7.5 5.0 3.2 1.9 11.7 7.7 5.0 3.1 1.8 S-7725 48.5 44 40 MAX 64.0 37.4 23.2 13.8 7.8 90.0 62.2 41.1 26.3 16.1 96.5 63.4 41.1 25.5 15.1 MIN 12.8 7.5 4.6 2.8 1.6 17.9 12.4 8.2 5.3 3.2 19.2 12.6 8.2 5.1 3.0 S-7731 80 73 66 MAX 95.0 55.5 34.5 20.5 11.6 133.5 92.4 60.9 39.1 23.8 143.1 94.0 61.0 37.8 22.4 MIN 19.1 11.1 6.9 4.1 2.3 26.8 18.6 12.2 7.9 4.8 28.8 18.9 12.8 7.6 4.5 S-7741 136 135 122 MAX 149.4 87.2 54.2 32.2 18.2 209.9 145.2 95.8 61.4 37.5 225.1 147.9 95.9 59.4 35.3 MIN 48.2 28.1 17.5 10.4 5.9 67.7 46.9 30.9 19.8 12.1 72.6 47.7 31.0 19.2 11.4 S-7742 297 277 251 MAX 149.4 87.2 54.2 32.2 18.2 209.9 145.2 95.8 61.4 37.5 225.1 147.9 95.9 59.4 35.3 MIN 48.2 28.1 17.5 10.4 5.9 67.7 46.9 30.9 19.8 12.1 72.6 47.7 31.0 19.2 11.4 PART NO K-243 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 15 Refrigeration Compressors, Chillers, Condensers HENRY TECHNOLOGIES - ACCUMULATORS AND MUFFLERS HORIZONTAL ACCUMULATORS RECOMMENDED TONS OF REFRIGERANT AT SUCTION EVAPORATING TEMPERATURE (°F) R-134a R-22 R-404A/R-507 C R-134a R-22 6 28 36.75 50 21.50 30.25 43.50 23.3 31.6 46.7 21.3 29 42.6 R-404A/ R-507 19.3 26.2 38.6 +40°F +20°F +0°F +40°F +20°F +0°F 15 28.6 50 10 19.5 35 6.25 12.5 23 29 50 95 20 30 65 12.5 25 45 +40°F +20°F +0°F 28.5 49.1 93.2 19 33.2 61.7 11.5 22.9 41.2 Electrical B Heating Components A DISCHARGE LINE MUFFLERS Selecting the Size of a Muffler Indoor Air Quality Select a muffler with a connection size that matches or exceeds the line size of the compressor discharge line. There are no tonnage ratings for mufflers, since the muffler will remove pulsations from the discharge regardless of flow. S-6300 Series: Maximum working pressure 500 psig. S-6400 and S-6600 Series: Maximum working pressure 450 psig. DIMENSIONS (in) SIZE CONN A B S-6304 S-6305 S-6307 S-6311 S-6405 S-6407 S-6411 S-6413 S-6415 S-6621 S-6625 S-6631 1/2 ODS 5/8 ODS 7/8 ODS 1-1/8 ODS 5/8 ODS 7/8 ODS 1-1/8 ODS 1-3/8 ODS 1-5/8 ODS 2-1/8 ODS 2-5/8 ODS 3-1/8 ODS 3 3 3 3 4 4 4 4 4 6 6 6 7.75 7.75 9.69 9.69 6.75 7 13.25 13.75 18.25 21 21 22.38 Tools & Instruments PART NO Thermostats REFRIGERANT HOLDING CAP. (lbs 0° F SAT.) Oils & Chemicals 1-5/8 ODS 2-1/8 ODS 2-5/8 ODS DIMENSIONS (in) Accessories, Supplies & Commodities S-7615 S-7621 S-7625 SIZE CONN K-244 Refrigeration PART NO Motors Liquid accumulators of this design should not be used when the temperature of the liquid refrigerant is less than +15°F in the accumulator. These accumulators have a 1/2" FPT connection for liquid injection and a 3/4" FPT connection for hot gas bypass. These connections can also be used for a relief device as required by UL 207. Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 16 HENRY TECHNOLOGIES - LIQUID REFRIGERANT RECEIVERS S-8060 SERIES VERTICAL RECEIVERS Receivers should be selected based on the operating charge for all system components, including the liquid lines. It is usual to add a small percentage to cover the refrigerant in long runs of suction and discharge lines, etc. It is essential that the maximum operating charge be determined, e.g., winter charge in air cooled condenser having flooded head pressure control, this being much greater than the normal summer charge. Electrical Motors Compressors, Chillers, Condensers Refrigeration S-8060 SERIES VERTICAL RECEIVERS *PUMP DOWN CAPACITY (lbs) R-134a R-22 R404A/R-507 S-8060 S-8061 S-8062 S-8063 S-8064 S-8065 S-8066 S-8067 S-8068 2.4 2.4 3.3 4.3 6.7 11.6 17.6 23.5 29.4 2.4 2.4 3.3 4.2 6.6 11.5 17.3 23.2 29.1 DIMENSIONS (in) B C A 2.0 2.1 2.8 3.7 5.7 10.0 15.0 20.1 25.2 3.00 3.50 3.50 4.00 5.00 6.00 6.00 6.00 6.00 10 7.5 10 10 10 12 18 24 30 D 7 5 7.63 7.25 6.75 8 15 21.25 27.25 7 5 7.63 7.25 6.75 8 15 14.88 14.88 CONNECTIONS Inlet Outlet 1/4 FLARE 1/4 FLARE 1/4 FLARE 1/4 FLARE 1/4 FLARE 3/8 FLARE 3/8 FLARE 1/2 FLARE 5/8 FLARE 1/4 FLARE 1/4 FLARE 1/4 FLARE 1/4 FLARE 1/4 FLARE 3/8 FLARE 1/2 FLARE 1/2 FLARE 5/8 FLARE WT(lb) 2 2 3 4 6 10 16 21 26 Maximum WP 450 PS *All Pump Down Capacities are calculated @ 90% of receiver volume @ 90° F. S-8600 SERIES HORIZONTAL RECEIVERS Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components PART NO S-8600 SERIES HORIZONTAL RECEIVERS PART NO *PUMP DOWN CAPACITY (lbs) R-134a R-22 R404A/R-507 S-8600 S-8610 S-8620 S-8630 18.8 24.3 29.2 35.0 18.6 24.0 28.8 34.6 16.2 20.9 25.0 30.1 A DIMENSIONS (in) B C Inlet CONNECTIONS Outlet FPT 5.00 5.00 6.00 6.00 28 36 30 36 3.00 3.00 3.63 3.63 5/8 ODS 5/8 ODS 5/8 ODS 5/8 ODS 5/8 ODS 5/8 ODS 5/8 ODS 5/8 ODS 3/8 3/8 3/8 3/8 SHIP WEIGHT (lb) 19 25 24 28 S-8600V SERIES HORIZONTAL RECEIVERS WITH BRACKETS & VALVES PART NO S-8600V S-8630V *PUMP DOWN CAPACITY (lbs) R-134a R-22 R404A/R-507 18.8 35.0 18.6 34.6 16.2 30.1 A B C 5.00 6.00 28 36 3.00 3.63 DIMENSIONS (in) D E 14 18 5.50 5.50 *Pump Down Capacities are calculated @ 90% of receiver volume @ 90° F. K-245 CONNECTIONS Outlet FPT F G Inlet .44 .44 7.00 7.00 1/2 ODS 1/2 ODS 1/2 ODS 1/2 ODS 3/8 3/8 SHIP WEIGHT (lb) 19 28 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 17 PART NO RECEIVER DIA S-9450 S-9451 S-9452 S-9453 S-9454 S-9455 S-9456 8-5/8 10-3/4 12-3/4 14 16 18 20 Mating flanges for level gauges not included on most receivers. BRACKET KITS RECEIVER DIA 3-019-908 3-019-910 3-019-912 8-5/8 10-3/4 12-3/4 ROTO-LOC VALVES PART NO THREAD ODS 3-030-140 3-030-141 3-030-142 3-030-143 3-030-150 1Ǝ - 14 1-1/4Ǝ - 12 1-1/4Ǝ - 12 1-3/4Ǝ - 12 1Ǝ - 14 1/2 7/8 1-1/8 1-3/8 5/8 Thermostats NOTE: Designed for horizontal mounting use only. Indoor Air Quality Heating Components PART NO Motors LIQUID LEVEL GAUGES Electrical HENRY TECHNOLOGIES - LIQUID REFRIGERANT RECEIVER ACCESSORIES Compressors, Chillers, Condensers Refrigeration ROTO-LOC/ODS ADAPTERS THREAD ODS 2-009-037 3-009-308 2-009-046 1Ǝ - 14 1-1/4Ǝ - 12 1-3/4Ǝ - 12 5/8 7/8 1-3/8 K-246 Refrigeration Tools & Instruments PART NO Accessories, Supplies & Commodities Oils & Chemicals Includes gasket. Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 18 HENRY TECHNOLOGIES - HELICAL OIL SEPARATORS The helical oil separator features a centrifugal flow path achieving approximately 99% efficiency of oil separation with low pressure drop. PART NO SIZE CONN S-5180 S-5181 S-5182 S-5185 S-5187 S-5188 S-5190 S-5192 S-5194 S-5290 S-5292 S-5294 S-5202 S-5203 S-5204 1/4 ODS 3/8 ODS 1/2 ODS 5/8 ODS 7/8 ODS 1-1/8 ODS 1-3/8 ODS 1-5/8 ODS 2-1/8 ODS 1-3/8 ODS 1-5/8 ODS 2-1/8 ODS 2-1/8 ODS 2-5/8 ODS 3-1/8 ODS DIMENSIONS (in.) A 2.50 2.50 4 4 4 4 6 6 6 6 6 6 8 10 12 B 6.38 7.50 13 15 17 19 15 17 17 15 17 17 24 27 30 C 1.75 1.75 2.75 2.75 3 3 4.25 4.25 4.38 4.25 4.25 4.38 5.38 6.50 7.75 D .44 .50 2.44 2.50 2.94 3.06 3.69 3.95 4.19 3.69 3.95 4.19 5.06 5.63 6.45 MAX. CAPACITY IN TONS OF REFRIGERATION AT EVAPORATOR TEMPERATURE NOMINAL PRE-CHARGED AMOUNT R-134a R-22 R-404A/R-507 DISCHARGE CFM (oz) -40°F +40°F -40°F +40°F -40°F +40°F .50 .75 .75 1.00 .75 1.00 .75 14 .75 1.00 1.00 1.50 1.00 1.50 1.00 14 1.00 1.50 1.50 2.00 1.50 2.00 1.50 14 3.00 4.00 4.50 5.50 4.00 5.50 4.00 14 4.50 5.50 7.00 8.00 6.50 8.50 6.00 14 6.00 7.50 9.00 10.50 8.50 11.00 8.00 14 8.00 10.00 13.00 14.00 12.00 15.00 11.00 40 11.00 13.00 16.00 18.00 15.00 19.00 14.00 40 18.00 21.00 25.00 30.00 24.00 31.00 22.00 40 8.00 10.00 13.00 14.00 12.00 15.00 11.00 25 11.00 13.00 16.00 18.00 15.00 19.00 14.00 25 18.00 21.00 25.00 30.00 24.00 31.00 22.00 25 22.00 27.00 35.00 39.00 31.00 41.00 29.00 25 46.00 56.00 71.00 80.00 64.00 83.00 60.00 25 72.00 88.00 112.00 127.00 100.00 131.00 94.00 25 S-5100’s - Connections are nickel plated steel. S-5200’s - Connections are copper plated steel. All the capacities shown are based on 100° F condensing. Minimum tonnage is 33% of rated capacity, oversizing is not acceptable. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-247 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 19 1/2 ODS 5/8 ODS 7/8 ODS 1-1/8 ODS 1-3/8 ODS 1.00 3.00 4.50 6.00 8.00 1.50 4.00 5.50 7.50 9.50 1.50 4.50 7.00 9.00 11.50 2.00 5.50 8.00 10.50 13.50 1.50 4.00 6.50 8.50 10.50 S-5687 S-5688 S-5690 S-5692 S-5694 7/8 ODS 1-1/8 ODS 1-3/8 ODS 1-5/8 ODS 2-1/8 ODS 6 8 9 11 13 7 10 12 13 21 9 11 13 16 25 10 12 14 18 30 S-5792 S-5794 1-5/8 ODS 2-1/8 ODS 11 18 13 21 16 25 S-1901 S-1902 S-1903 S-1904 1-5/8 ODS 2-1/8 ODS 2-5/8 ODS 3-1/8 ODS 14 21 37 52 17 25 46 64 20 30 50 75 12 12 12 12 12 12 12 2.00 5.50 8.50 11.00 14.00 1.50 4.00 6.00 8.00 10.00 12 12 12 12 12 8 9 12 15 24 10 13 15 19 31 7.50 9.00 11.00 14.00 22.50 30 30 30 30 30 18 30 15 24 19 31 14.00 22.50 20 20 24 35 65 90 19 28 48 72 25 37 68 94 18.00 27.00 49.00 56.00 20 20 20 20 S-5500’s, S-5800’s, S-5600’s, S-5700’s - Connections are nickel plated steel. S-1900’s - Connections are copper plated steel. Oil Flow Rate @ 175 psi differential = 80 gal/min. K-248 Refrigeration Tools & Instruments Accessories, Supplies & Commodities All the capacities shown are based on 100°F condensing temperature and on connection size being the same as the compressor discharge valve we recommend for parallel compressor systems application for our S-5700 and S-1900 series oil separators. For low temperature applications, we recommend our S-1900 series oil separators. If operating horsepower is larger than the systems cooling load, size oil separator to the operating horsepower. Motors S-5882 S-5885 S-5887 S-5888 S-5890 .75 1.00 1.50 4.00 6.00 8.00 10.00 Electrical 1/4 ODS 3/8 ODS 1/2 ODS 5/8 ODS 7/8 ODS 1-1/8 ODS 1-3/8 ODS Heating Components S-5580 S-5581 S-5582 S-5585 S-5587 S-5588 S-5590 MAXIMUM PRE-CHARGED DISCHARGE AMOUNT CFM (oz) Indoor Air Quality SIZE CONN Thermostats CAPACITY IN TONS OF REFRIGERATION AT EVAPORATOR TEMPERATURE (nominal) R-134a R-22 R-404A/R-507 -40°F +40°F -40°F +40°F -40°F +40°F .50 .75 .75 1.00 .75 1.00 .75 1.00 1.00 1.50 1.00 1.50 1.00 1.50 1.50 2.00 1.50 2.00 3.00 4.00 4.50 5.50 4.00 5.50 4.50 5.50 7.00 8.00 6.50 8.50 6.00 7.50 9.00 10.50 8.50 11.00 8.00 9.50 11.50 13.50 10.50 14.00 PART NO Oils & Chemicals HENRY TECHNOLOGIES - CONVENTIONAL OIL SEPARATORS Compressors, Chillers, Condensers Refrigeration Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 20 Refrigeration HENRY TECHNOLOGIES - CONVENTIONAL OIL SEPARATORS K-249 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 21 Refrigeration Compressors, Chillers, Condensers HENRY TECHNOLOGIES - HEAT ELEMENTS 240V 120V 240V 120V 110V 220V 220V HENRY TECHNOLOGIES - OIL SEPARATORS - REPLACEMENT COMPONENTS The A-1900-30 Replacement Float Assembly is used on the S-5200 & S-1900 series Oil Separators, and the A-5700-30 is used on the S-5700 series Oil Separators. Both Replacement Assemblies include the gasket which can also be ordered separately (Part Number 2-023-001). The S-5700 series screen cartridge can also be ordered as a replacement part (Part Number 3-010-301). A 3/8" ODS oil return connection is available by ordering with an "X" suffix (i.e. A-1900-30X). The A-5000-30 Replacement Float Assembly is used on the S5800 series Oil Separators. The Replacement Assembly includes the gasket (Part Number 2-023-001). K-250 Refrigeration Tools & Instruments Part No A-1900-30 A-5700-30 A-5000-30 Heating Components VOLTS Indoor Air Quality 50W 25W 25W 25W 25W 25W 50W Thermostats WATTAGE 6 4 4 2-1/2 4 4 6 Oils & Chemicals DIAMETER (in) S-9112J S-9113J S-9114J S-9115J S-9101 S-9111 S-9112 Accessories, Supplies & Commodities PART NO Electrical Motors Heat elements add heat to oil separators to prevent migration of refrigerant to the vessel during off cycles of the compressor. Heat elements can also be used on suction line accumulators to warm the oil and allow oil return to the compressor on low temperature applications. Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 22 HENRY TECHNOLOGIES - OIL LEVEL REGULATORS (CONVENTIONAL) The oil level regulator controls the oil level in the compressor crankcase with a float operated valve. Oil level regulators are designed to attach directly to the sight glass housing on compressor crankcases. Adapter kits are available for compressors that have a different sight glass configuration. The sight glass from the compressor or supplied with an adapter kit, bolts to the second regulator flange for visual observation of the oil level. S-9010 FIXED LEVEL REGULATOR The S-9010 regulator maintains the oil level in the compressor crankcase at 1/8-in. sight glass. The S-9010 maintains the level at any pressure differential* between 5 and 30 psi. Motors Compressors, Chillers, Condensers Refrigeration S-9090 ADJUSTABLE REGULATOR One oil level regulator for all applications The S-9090 regulator allows the oil level in the compressor crankcase to be maintained at any level between 1/4 and 1/2 sight glass. Indoor Air Quality Heating Components Electrical The S-9010 oil level regulator is designed to bolt directly to the 3 bolt sight glass housing found on many compressor crankcases. Do not use on Satellite Compressor. Part No S-9010 S-9130 ADJUSTABLE REGULATOR The S-9130 maintains the level at any pressure differential* between 5 and 90 psi. If the oil level in the crankcase is too high or too low, the level can be adjusted by turning the adjustment screw on top of the regulator. This can be done while the system is in operation. Our exclusive design eliminates the need of shutting down the system and disconnecting the oil feed lines in order to adjust the regulator. Part No S-9130 *Operating Pressure Differential — The difference between the oil fed to the oil regulator and its compressor crankcase, where the regulator is controlling oil level. Refrigeration Accessories, Supplies & Commodities The S-9130 regulator allows the oil level in the compressor crankcase to be maintained at any level between 1/4 and 1/2 sight glass. Tools & Instruments Oils & Chemicals Thermostats The S-9090 maintains the level at any pressure differential* between 5 and 90 psi. If the oil level in the crankcase is too high or too low, the level can be adjusted by turning the adjustment screw on top of the regulator. This can be done while the system is in operation. Our exclusive design eliminates the need of shutting down the system and disconnecting the oil feed lines in order to adjust the regulator. Part No S-9090 K-251 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 23 S-9030 Adjustable Regulator The S-9030 Oil Level Regulator is designed to bolt directly to the three bolt sight glass housing found on many compressor crankcases. Adapter kits are available for compressors that have a different sight glass configuration. The sight glass from the compressor or supplied with an adapter kit, bolts to the second regulator flange for visual observation of the oil level. K-252 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats FEATURES: • Complete oil level control without variations in pressure drop. • 3/8" Flare normally closed solenoid valve. • Adjustable between 1/4" and 1/2" glass. • Low level alarm circuit. • 24 VAC .25 amp. No UL considerations. • Equalization connection 3/8" Flare. • Operating differential 5 to 300 psig. • Reliable float switch operation, 20 VA pilot duty. • All major components replaceable. • One oil level regulator for all applications Motors The oil level is adjustable by loosening the compression nut and manually adjusting the position of the float switch. A low level alarm is also provided, for oil safety on hermetic and scroll compressors. If the oil level drops 1/8" below the set point, a second magnetic reed switch closes activating a customer supplied alarm. This alarm circuit may also be used to disconnect power from the compressor. While the regulator is in alarm the solenoid valve remains open trying to re-establish the oil level. Electrical The Electro-Mechanical Oil Level Regulator S-9030 provide a simplistic means for controlling oil level for hermetic, semi-hermetic, reciprocating and scroll compressors, through the use of a float switch and solenoid valve. A magnetic reed float switch closes upon the reduction of oil level in the oil regulator body. This action energizes the solenoid valve thereby feeding oil into the regulator body. Heating Components S-9030 Adjustable Regulator Indoor Air Quality HENRY TECHNOLOGIES - ELECTRO-MECHANICAL OIL LEVEL REGULATORS Compressors, Chillers, Condensers Refrigeration Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 24 HENRY TECHNOLOGIES - OIL RESERVOIR Due to system design, loads & defrost cycles, varying amounts of oil can be returned by the oil separator. Because of this, a safety reserve of oil is required for the operation of our oil control system. The oil reservoir is the holding vessel for this standby oil. It has sight glass ports to observe the oil level inside the vessel. The valve on top of the Oil Reservoir receives oil from the Oil Separator, and the bottom valve distributes oil to the Oil Level Regulators. The valves are backseating and have a 1/4" flare connection, allowing the addition or removal of oil from the reservoir. High pressure gas returns with the oil from the Oil Separator to the Oil Reservoir. Pressure could build up in the Oil…. Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration New System Start-Up On system start-up of a new parallel system, oil should be added to the OIL RESERVOIR to the upper sight glass port, NOT ABOVE IT. It is commonly accepted that in a new refrigeration system, some oil will be absorbed by the refrigerant as the system becomes balanced out. After two hours of operation, the OIL RESERVOIR, if necessary, should again be filled to the upper sight glass, and also after two days, by which time the entire refrigeration system should be balanced out. Then the OIL RESERVOIR must be observed on each service call. No oil should be added again until the oil level falls below the lower sight glass port. Oils & Chemicals Existing System Start-Up When installing this OIL CONTROL SYSTEM, on a parallel system that has been in operation for some time, the amount of oil should be added cautiously. With the efficiency of the new OIL SEPARATOR, the oil return could likely be sufficient to fill the OIL RESERVOIR to the lower sight glass port only. Observe for one day. After the second day, if the oil level has not risen to the upper sight glass, add oil. If the oil level has risen above the upper sight glass port, remove the excess oil from the OIL RESERVOIR. Accessories, Supplies & Commodities Tools & Instruments Refrigeration ….Reservoir to adversely affect the Oil Regulators. To prevent this, a vent line is installed from the top of the Oil Reservoir to the suction line. This line permits the pressure in the Oil Reservoir to be approximately the same as the suction line and the compressor crankcases. The 4 gallon model Cat. No. S-9108 should be used on very large systems, or systems with excessive oil charges, long line runs or any case where suction oil return may be impeded. PART NO NO OF SIGHT GLASSES A CAPACITY (IN GALLONS) B C DIMENSIONS (in) D S-9108 S-9108U S-9109 3 2 2 4 3 2 2.5 1-3/4 1-1/4 3/4 3/4 3/4 37.94 28.94 19.94 K-253 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 25 Refrigeration The stand alone regulator is suitable for both high pressure and low pressure oil management control systems. The oil is regulated at 1/2 Sight Glass using a pulse timer. When a low condition is detected , there is a 15 second time delay prior to oil feed to ensure stability and prevent overfill. Oil is then pulsed into the compressor at 3 second on/off intervals. If demand is not satisfied after 2 minutes of continuous oil feed, a low level alarm is initiated by means of a fail-safe electrical contact. During the alarm condition the regulator will continue to pulse feed oil. The alarm will reset automatically if the oil returns to 1/2 glass. The alarm contact may be used to shut down the compressor in the event of a low level condition. Max Ambient Temp 113°F Max Fluid Temp 176°F Supply Voltage (Conns 1 & 2) 24V AC 50 / 60 HZ Rated Operating Current 0.5 Amps Alarm contacts (Conns 3 & 4) Volt Free, N/O The Optronic Regulator is fitted to the sight glass housing of the compressor and has an internal sight glass that allows the visual inspection of the crankcase oil level. Alarm Contact Rating 24V DC@ 2A, 120V AC@2A Electrical Connection 4 Pin M12 Circular, IEC60947-5-2 Protection Class IP54 Status LED’s 4 Oil Supply Line 1/4” FLARE Weight 2.6 LBS Approved Refrigerants/Oils HFC/POE (For other refrigerant/Oil combinations contact Henry Technologies) *Utilizing patented technology-Patent #5,278,426. Part No. OPTRONIC OP-02 The Optronic Regulator meets the requirements of UL and bears the UR symbol. The regulator is CE marked in accordance with the EMC directive. K-254 Indoor Air Quality 350 PSIG Thermostats Max Differential Pressure Oils & Chemicals 500 PSIG Accessories, Supplies & Commodities Max Working Pressure Tools & Instruments SPECIFICATIONS Refrigeration The Optronic Oil Level Regulator* is designed to control the oil level in the compressor crankcase using proven optical sensor technology. Heating Components Electrical Motors Compressors, Chillers, Condensers HENRY TECHNOLOGIES - ELECTRONIC OIL LEVEL CONTROL Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 26 HENRY TECHNOLOGIES - OIL LEVEL REGULATOR ADAPTER KIT All kits include necessary hardware, gaskets and sight glasses to mount Oil Level Regulators to various compressors shown in this table. *KIT 3-033-201 INCLUDED WITH ALL OIL LEVEL REGULATORS NOTE: For compressors not listed above, a universal adapter kit is available Part No. 3-033-217. This adapter kit has a 3-hole flange to mount to the regulator. The compressor end of the kit is a 1-1/4" OD steel tube. The existing compressor sight glass gland or flange must be bored out or bushed down to accept the 1-1/4” tube. The tube is then brazed or welded to the reworked gland or flange and installed on the compressor. ADAPTER KIT PART NO 3-033-201* 3-033-201* 3-033-201* 3-033-201* 3-033-201* 3-033-202 3-033-202 3-033-203 3-033-204 3-033-205 3-033-206 3-033-207 3-033-208 3-033-209 3-033-212 3-033-218 3-033-218 3-033-219 3-033-228 3-033-242 3-033-244 3-033-246 3-033-253 SIGHT GLASS OIL LEVEL COMPRESSOR MANUFACTURER 1/2 1/2 1/2 1/4 1/4 1/2 1/2 1/2 1/4 1/2 1/2 1/4 1/2 1/2 1/4 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Dunham-Bush Big 4 Trane York Carrier (models EA & ER) Copeland (over 5 tons) Copeland (under 5 tons) Prestcold (model “K”) Dunham-Bush (model “D”) Carrier (DA,DR,5F,5H & 06D) Schnacke-Grasso Trane Copeland (older model) Vilter Vilter Copeland (model “8R”) Prestcold (C,E,R,L, & LG) Trane (model “K”) Schancke-Grasso Grasso Thermtrol Bristol Bock Maneurop Bitzer Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-255 SIGHT GLASS CONFIGURATION 3 Bolt 1-7/8 B.C. 3 Bolt 1-7/8 B.C. 3 Bolt 1-7/8 B.C. 3 Bolt 1-7/8 B.C. 3 Bolt 1-7/8 B.C. 1-1/8 - 12 Thread 1-1/8 - 12 Thread 4 Bolt 2-1/8 B.C. 1-1/2 - 18 Thread 2” x 16 Thread 5 Bolt 2-1/2 B.C. 4 Bolt 2-1/8 B.C. 1-1/2 NPT Thread 2Ǝ NPT Thread 3 Bolt 1-7/8 B.C. 42mm Thread 3/4 NPT Thread 1-1/4 NPT Thread 1Ǝ NPT Thread 15/16 - 20 Thread 4 Bolt 1-31/32 B.C. 1-1/8 - 18 thread 4 Bolt 2Ǝ B.C. Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 27 HENRY TECHNOLOGIES - OIL LEVEL CONTROL COMPONENTS PRESSURE VALVE PART NO PRESSURE SETTING S-9104 S-9104H 5 lbs 20 lbs SIZE CONNECTION Motors 3/8" Female x 3/8" Male Flare 3/8" Female x 3/8" Male Flare Compressors, Chillers, Condensers Refrigeration Used with oil reservoir. A B S-9106H S-9106V 3/8" Flare 3/8" Flare 3/8" Fem. Flare 3/8" Fem. Flare TYPE Vertical Horizontal Used to protect oil regulators by removing foreign matter. 3/8” ODS connections available by ordering with an “X” suffix (i.e., S-9105X) PART NO SIZE CONNECTION S-9105 3/8" Flare EQUALIZATION ADAPTER KIT 100 Mesh x 11 sq. in. K-256 Refrigeration Tools & Instruments PART NO 3-033-226 SCREEN DATA Accessories, Supplies & Commodities OIL LINE STRAINER Oils & Chemicals Thermostats Indoor Air Quality PART NO Heating Components Electrical SHUT-OFF BRASS VALVES Sec#10f Refridge 49pages_Fridge 12/10/2010 1:56 PM Page 28 HENRY TECHNOLOGIES - ELECTRONIC OIL LEVEL CONTROL AND ACCESSORIES 3-033-245 Sight Glass Adapter Kit Sight Glass Adapter Kit is for compressors with only one crankcase sight glass. The 3-Bolt flange Oil Level Transducer (S-9330) does not allow for a visual observation of the oil level in compressors. This adapter kit provides an additional sight glass and a 1/4" flare equalization/oil fill connection. Motors Compressors, Chillers, Condensers Refrigeration PART NO 3-033-245 Solenoid Valve is used with the S-9310 Electronic Oil Level Controller. The 3-044-001 solenoid valve is piped directly in the oil return line to the compressor. PART NO 3-044-001 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical 3-044-001 Solenoid Valve K-257 Sec#10f Refridge 49pages_Fridge 12/10/2010 2:18 PM Page 29 HENRY TECHNOLOGIES - OIL FILTER — POE OIL FILTER-DRIER K-258 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals S-4005 POE Oil Filter & Drier was designed to clean and dry POE oil as it is returned to the compressor crankcase or Oil Reservoir in parallel systems. Clean and dry POE oil assures the proper operation of the float assemblies in the Oil Separator and the Oil Level Regulators. Heating Components S-4005 POE Oil Filter & Drier for POE oil return on systems using Oil Separators and Oil Control Systems. This is not a refrigerant Filter Drier. It is designed to operate at a very low pressure drop in a 100% oil environment. Indoor Air Quality Our S-4004 Oil Filter removes foreign material from the oil as it passes through the filter. The filter easily captures any debris that may be in the system, such as dirt, metal chips, etc. (particle retention 10 micron). The S-4004 is required on all Electronic Oil Level Controllers to protect the solenoid manifold. Thermostats PART NO S-4004 S-4005 Electrical Motors Our Oil Line Strainer protects the Oil Level Regulator by removing foreign matter such as dirt, metal chips, etc. so the foreign material will not plug the small orifice of the Oil Level Regulator. It will also prevent foreign material from entering the compressor. The strainer’s 100 mesh screen provides adequate straining with low pressure drop. Compressors, Chillers, Condensers Refrigeration Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 30 Electrical Motors Compressors, Chillers, Condensers Refrigeration HENRY TECHNOLOGIES - CHECK VALVES (Globe Design) FORGED BRASS BODY — TYPE 116 • Temperature rating –40° F to +300° F • Maximum working pressure 500 psi Teflon® synthetic seat, with fully guided piston and stainless steel spring. Will operate in any position except bonnet down. Internal parts can be easily removed to prevent damage when soldering valve into line. Suitable for highside or lowside installation and hot gas applications, refrigerants and other industrial fluids, non-corrosive to brass and steel. 116003 116004 116005 116007 SIZE CONN A 3/8 ODS 1/2 ODS 5/8 ODS 7/8 ODS 2.94 2.94 2.94 3.88 DIMENSIONS (in) B C D WT(lb) .41 .14 .14 .63 .31 .38 .50 .88 .53 .51 .48 2.04 D WT(lb) .75 .94 1.00 1.13 1.50 1.69 2.73 4.41 6.04 9.32 17.10 27.43 2.06 2.06 2.06 2.94 FORGED BRASS BODY — TYPE 205 • Maximum working pressure 500 psi • Temperature rating –20°F to +300°F PART NO SIZE CONN A 205-7/8 205-1-1/8 205-1-3/8 205-1-5/8 205-2-1/8 205-2-5/8 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8 4.25 4.88 5.38 6.50 8.50 11.00 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components PART NO K-259 DIMENSIONS (in) B C .97 1.14 1.25 1.50 2.00 2.25 3.16 3.88 4.25 5.06 5.88 6.88 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 31 Refrigeration Compressors, Chillers, Condensers HENRY TECHNOLOGIES - CHECK VALVES (Straight Through Design) BRASS BODY — TYPE 119 Compact, sturdy and noiseless in operation, with minimum pressure drop. A DIMENSIONS (in) B C WT(lb) 1/4 FL 3/8 FL 2.26 2.51 — — .81 .81 .22 .26 WT(lb) BRASS BODY — TYPE 120 Indoor Air Quality Heating Components • Brass construction with synthetic rubber seat • Complete Piston Guidance • Stainless Steel Spring • Operates in any position • Temperature Rating –20° F to 200° F • Maximum Working Pressure 500 PSI Compact, sturdy and noiseless in operation, with minimum pressure drop. PART NO 120-3/8 120-1/2 120-5/8 120-7/8 SIZE CONN A DIMENSIONS (in) B C 3/8 ODS 1/2 ODS 5/8 ODS 7/8 ODS 5.25 6.34 6.28 6.44 .31 .38 .50 .75 .81 1.25 1.25 1.50 .28 .57 .64 1.06 Center to Height SIZE CONN Center to Bottom DIMENSIONS (in) Center to Side 215-7/8 215-1-1/8 215-1-3/8 215-1-5/8 7/8 ODS 1-1/8 ODS 1-3/8 ODS 1-5/8 ODS 1-1/2 1-3/4 1-15/16 2-5/32 1-3/4 2-3/16 2-7/16 2-3/4 K-260 3-3/16 3-7/16 4-3/8 5-1/16 Refrigeration PART NO Tools & Instruments Accessories, Supplies & Commodities HENRY TECHNOLOGIES - ANGLE CHECK VALVES Thermostats 119-1/4 119-3/8 SIZE CONN Oils & Chemicals PART NO Electrical Motors • Brass Construction with Synthetic Rubber Seat • Complete Piston Guidance • Stainless Steel Spring • Operates in Any Position • Temperature Rating –20° F to +200° F • Maximum Working Pressure 500 PSI Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 32 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration HENRY TECHNOLOGIES - PACKLESS VALVES — Standard Type • Forged Brass Cored Body and Bonnet • Recommended for vacuum applications and service pressures up to 500 PSI • Non-Directional Flow • Backseating lower stem • Diaphragms are changeable under line pressure • Temperature Rating–20°F to +275°F Standard Globe Valves — O.D. Solder PART NO SIZE CONN A 6261N 6263N 6264N 6265N 6266N 6267N 6268N 1/4 ODS 3/8 ODS 1/2 ODS 5/8 ODS 3/4 ODS 7/8 ODS 1-1/8 ODS 2.63 2.63 3.13 3.50 4.38 4.88 6.00 DIMENSIONS (in) B C .63 .63 .63 .75 .75 .75 1.00 Mtg Hole Ctrs 3.38 3.38 3.63 3.75 5.00 5.38 6.50 1.63 1.63 1.75 2.00 2.25 2.50 3.25 WT(lb) 1.00 1.00 1.25 1.13 2.75 3.25 5.50 Standard Angle Valves — O.D. Solder PART NO SIZE CONN A DIMENSIONS (in) B C 6471N 6473N 6474N 6475N 6476N 6477N 6478N 1/4 ODS 3/8 ODS 1/2 ODS 5/8 ODS 3/4 ODS 7/8 ODS 1-1/8 ODS 1.38 1.38 1.50 1.50 1.88 2.13 2.50 1.13 1.13 1.25 1.38 1.50 1.88 2.25 3.50 3.50 3.50 3.88 4.88 5.38 6.50 WT(lb) .75 .75 1.00 1.25 2.25 3.75 4.25 Hand Expansion Valves — Standard Type PART NO SIZE CONN Ori Dia A DIMENSIONS (in) B C Mtg Hole Ctrs 6291N 6293N 6294N 6295N 6296N 6297N 6298N 1/4 ODS 3/8 ODS 1/2 ODS 5/8 ODS 3/4 ODS 7/8 ODS 1-1/8 ODS .22 .22 .22 .28 .34 .38 .44 2.63 2.63 2.63 3.38 3.88 4.38 4.88 .63 .63 .63 .63 .75 .75 .75 3.38 3.38 3.38 3.50 3.75 5.00 5.38 1.63 1.63 1.63 1.75 2.00 2.25 2.50 WT(lb) 1.00 1.00 1.00 1.25 1.38 2.75 1.00 Charging and Purging Valves — Globe Standard Type PART NO 6231N 6232N 6233N 6234N SIZE CONN A DIMENSIONS (in) B C 1/2 ODS x 1/4 Flare 3/8 ODS x 3/8 Flare 1/2 ODS x 1/2 Flare 5/8 ODS x 5/8 Flare 2.63 2.63 3.25 3.75 .63 .63 .63 -- 3.38 3.38 3.63 3.75 WT(lb) 1.00 1.25 1.38 -- Charging and Purging Valves — Single Standard Type PART NO SIZE CONN (in) Bottom Side 6432N 3/8 ODS 3/8 Flare K-261 A DIMENSIONS (in) B C 1.38 1.13 3.38 WT(lb) .75 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 33 Refrigeration Compressors, Chillers, Condensers HENRY TECHNOLOGIES - RECEIVER VALVES — Packed, Angle Type Forged Brass — Non-Back-Seating • Temperature Rating: –20° F to +300° F • 500 PSI Maximum Working Pressure • Forged Brass Body PART NO SIZE CONN (in) BOTTOM Side A DIMENSIONS IN INCHES B C D E WT (Lb) 1/4 MPT 1/4 MPT 1/4 MPT 3/8 MPT 3/8 MPT 3/8 MPT 1/2 MPT 1/2 MPT 1/4 FL 1/4 FPT 3/8 FL 1/4 FL 3/8 FL 1/2 FL 3/8 FL 5/8 FL 3.80 3.80 3.80 3.80 3.80 3.80 3.94 4.56 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.62 1.25 1.25 1.25 1.25 1.25 1.25 1.38 1.38 .31 .31 .31 .31 .31 .31 .31 .31 1/4 ODS 5/16 ODS 5/16 ODS 3/8 ODS 3/8 ODS 3/8 ODS 1/2 ODS 1/2 ODS .35 .35 .35 .35 .35 .40 .59 .91 1/2 1/2 .62 .69 Electrical 7761-B 7771-B 7763-B 7764-B 7766-B 7767-B 7768-AB 7768-B Motors Forged Brass — Non-Back-Seating 7792-B 7793-B 1/2 MPT 1/2 MPT 1/2 FL 5/8 FL 4.88 4.88 1.28 1.53 1.69 1.69 .38 .38 Heating Components Forged Brass — Back-Seating Forged Brass — Back-Seating* 4.34 4.47 4.58 5.44 7.10 7.42 9.14 1.28 1.28 1.25 1.75 1.75 2.00 2.13 1.16 1.25 1.41 1.69 2.00 2.25 2.44 .31 .38 .50 .75 .94 1.00 1.09 — — — — — — — .54 .54 .54 1.06 1.83 2.40 3.53 Indoor Air Quality 3/8 ODS 1/2 ODS 5/8 ODS 7/8 ODS 1-1/8 ODS 1-3/8 ODS 1-5/8 ODS Thermostats 7830 7831 7832 7833 7834 7835 7836 PART NO SIZE CONN (in) Bottom Side 9270 9271 9272 9273 9274 1/4 ODS 3/8 ODS 3/8 ODS 1/2 ODS 1/2 ODS 1/4 Flare 1/4 Flare 3/8 Flare 1/4 Flare 3/8 Flare K-262 A 3.88 3.88 3.88 3.88 3.88 DIMENSIONS (in) B C 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 D WT(lb) .31 .31 .31 .38 .38 .40 .40 .46 .40 .46 Tools & Instruments • Forged Brass Body, Plated Black Oxided Steel Stem and Molded Valox Seal Cap, Brass Flare Caps. • Temperature Rating: –20° F (–29° C) to +300° F (+149° C). • Maximum Working Pressure: 500 PSI, (35 Kg/cm2) • Valves Furnished Disassembled to Avoid Excessive Heating of Internal Parts During Brazing. Refrigeration HENRY TECHNOLOGIES - PACKED ANGLE TYPE, CHARGING AND PURGING Accessories, Supplies & Commodities Oils & Chemicals *Furnished with 1/4-in. flare capped charging and testing connection above back-seat. Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 34 Compressors, Chillers, Condensers Refrigeration HENRY TECHNOLOGIES - SEAL CAP VALVES — Backseating Design • Forged Brass Body with Integral Mounting Flange, Plated Steel Stem; Brass Bonnet and Molded Valox Seal Cap. • Backseating: Can Be Repacked Under Pressure. • Temperature Rating: –20° F (–29° C) to +300° F (+149° C) • Maximum Working Pressure: 500 PSI, (35 Kg/cm2) • Recommended for Hot Gas Service or Other High Temperature Applications. 9261 9263 9264 9265 SIZE CONN A B C D E F WT(lb) 1/4 ODS 3/8 ODS 1/2 ODS 5/8 ODS 2.69 3.00 3.19 3.19 .66 .66 .66 .66 4.35 4.35 4.35 4.35 .31 .38 .44 .52 1.63 1.63 1.63 1.63 .28 .28 .28 .28 .79 .81 .80 .79 HENRY TECHNOLOGIES - SEAL CAP VALVES — GLOBE DESIGN Thermostats Indoor Air Quality Heating Components Electrical Motors DIMENSIONS (in) PART NO Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals • Valve Bodies: Cast Bronze. • Backseating: Can Be Repacked Under Pressure. • Temperature Rating: –40° F (–40° C) to +325° F (+163° C) • Maximum Working Pressure: 450 PSI, (31 Kg/cm2). DIMENSIONS (in) PART NO SIZE CONN A B C D WT(lb) 2030-AA 2030-BA 2031 2032 2033 2034 2035 7/8 ODS 1-1/8 ODS 1-3/8 ODS 1-5/8 ODS 2-1/8 ODS 2-5/8 ODS 3-1/8 ODS 4.25 4.88 5.38 6.50 8.50 11.00 12.00 .97 1.14 1.25 1.50 2.00 2.25 2.63 5.62 5.88 8.75 9.94 10.63 11.94 13.25 .75 .94 1.00 1.13 1.50 1.69 1.75 3.00 4.68 7.35 10.40 16.69 28.12 44.00 K-263 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 35 HENRY TECHNOLOGIES - THREE-WAY DUAL SHUT-OFF VALVES B C D E 2.75 2.75 2.75 3.63 3.63 5.81 5.81 2.06 2.06 2.06 2.31 2.31 3.68 3.68 2.50 2.50 2.81 3.88 3.88 3.88 3.88 1.25 1.25 1.40 1.75 1.75 2.00 2.00 3.60 3.60 3.88 5.75 5.75 7.50 7.50 WT (Lb) 1.15 1.05 1.67 3.21 3.00 7.87 6.92 Accessories, Supplies & Commodities Oils & Chemicals Thermostats A Indoor Air Quality DIMENSIONS (in) Tools & Instruments 923 925 927 8021A 8022A 8024 8025 SIZE CONNECTIONS (in) 3/8 NPTF 1/2 NPTF 3/4 NPTF 1/2 NPTF 3/4 NPTF 1 NPTF 1-1/4 NPTF K-264 Refrigeration PART NO Heating Components Electrical Motors • Bodies: 92 Series: Forged Brass; 802 Series: Forged Steel; Painted. 2 • Maximum Working Pressure: 450 PSIG (31.5 Kg/Cm ) • Temperature Rating: –20° F (–29° C) to +300° F (+149° C) • Recommended for Use with Relief Valve Types. • 802A Series is Suitable for Refrigerants Including Ammonia and Other Industrial Fluids Non-Corrosive to Steel. Compressors, Chillers, Condensers Refrigeration Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 36 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration HENRY TECHNOLOGIES - PRESSURE RELIEF VALVES — Atmospheric, Angle & Straight-Thru Types ATMOSPHERIC RELIEF VALVES FEATURES • Brass Construction Set and Sealed at the Factory; All NPTF Connections are American Standard Dryseal Tapered Pipe Threads. • Valves are Stamped with Catalog Number, Size, Pressure Setting, Capacity and ASME-UV National Board Symbol; CRN Number and Flow Arrow. • All NPTF Connections are American Standard Dryseal Tapered Pipe Threads • Positive Pressure Relief • Consistent operation at marked pressure setting • These relief valves are designed with HENRY’s new “Center Leading Pivot” concept allowing the piston to reseat squarely to the body seat, thus reducing the possibilities of leakage. • Suitable for Refrigerants 12, 22, 500, 502, 12, 134a, and other Industrial Fluids Non-Corrosive to Brass, Monel, Steel and Teflon • Temperature Rating: –40°F (–40°C) to +225°F (+107°C) • Orders Must Specify Catalog Number, Pressure Setting, and Type of Refrigerant or Fluid with which the Valve is to be used; UV/NB Certified Setting Range 150-450 PSI. Contact Henry for Non-Certified Setting Range Information. • Bodies: 5600 Series, Ductile Iron; 5300 Series, Stainless Steel; 5200 Series, Brass • Cap: Steel • Seat inserts, seat discs and main guides, piston Stainless steel • Seat material: Teflon® or Neoprene where “N” • Connections: (NPTF) pipe threaded • Other component metal parts are steel • Set and sealed at the factory and furnished with nameplates stamped with catalog no., size, pressure setting, capacity and ASME-UV National Board symbol. • Temp. rating: -20°F (-28°C) to +275°F (+135°C) • Protective lacquer finish • Suitable for ammonia, HFC’s and CFC’s, refrigerants and other industrial fluids non-corrosive to steel and Teflon as indicated. • Each valve has unique serialization for tagging requirements Relief Valves in the types and sizes shown are constructed in accordance with the requirements of the ASME. These valves are also approved by many Selection of Relief Valves. Most states and municipalities local refrigeration and air conditioning codes in the which have refrigeration safety codes conform to the USA and Canada for relief of excess pressure. In “American Standard Safety Code for Mechanical addition, these valves are stamped with ASME- UV Refrigeration (ANSI/ASHRAE 15).” This code provides for a symbol & NB to indicate National Board certification relief valve setting not to exceed the design working pressure of capacities between 150 P.S.I. and 450 P.S.I. of the vessel on which the relief valve is installed. The Whenever conditions permit, it is advisable to have discharge capacity required is based on the size of the vessel the relief valve pressure setting (which must not and the refrigerant used. The discharge capacity of relief exceed the design working pressure of the vessel) at valves varies with the pressure setting. The capacities of least 25 percent higher than the normal maximum Henry Relief Valves at various pressure settings are shown operating pressure for the refrigerant used. on Data Sheet No. AE 1303, copies of which are available by calling the Engineering and Technical Assistance line 1-800627-5148. Whenever conditions permit it is advisable to have the relief valve pressure setting (which must not exceed the design working pressure of the vessel) at lease 25% higher than the normal maximum operating pressure for the refrigerant used. • Standard Settings Are: 235 PSI, 300 PSI, 350 PSI, 400 PSI, 425 PSI, 450 PSI Important: Orders must specify pressure setting Certification: Available if requested on purchase order K-265 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 37 170 190 Standard Pressure Setting - PSIG 200 235 250 280 300 325 350 360 400 450 2.9 4.3 4.6 5.2 5.7 6.0 7.0 7.4 8.2 8.8 9.5 10.2 10.5 11.6 13.0 3.2 4.7 5.0 5.6 6.3 6.6 7.6 8.1 9.0 9.6 10.4 11.2 11.5 12.7 14.3 5.6 8.2 8.8 9.9 10.9 11.5 13.4 14.2 15.8 16.8 18.2 19.5 20.4 22.2 24.9 8.0 11.8 12.6 14.1 15.7 16.4 19.1 20.3 22.6 24.2 26.1 28.0 28.8 31.9 35.7 8.3 12.2 13.1 14.7 16.3 17.1 19.9 21.1 23.5 25.1 27.1 29.2 30.0 33.2 37.2 13.9 20.7 22.0 24.7 27.4 28.8 33.5 35.5 39.5 42.2 45.6 49.0 50.3 55.7 62.5 21.0 31.2 33.2 37.3 41.4 43.4 50.5 53.6 59.7 63.8 68.8 79.9 76.0 84.1 94.3 28.2 41.8 44.6 50.0 55.5 58.2 67.8 71.9 80.0 85.5 92.3 99.1 101.9 112.8 126.4 9.3 13.9 14.8 16.6 18.4 19.3 22.4 23.8 26.5 28.3 30.6 32.8 33.7 37.3 41.8 5601* 5602* 22.7 33.6 35.8 40.2 44.6 46.8 54.4 57.7 64.3 68.7 74.2 79.6 81.8 90.6 101.6 5603* 5614N* 5604* 33.8 45.6 23.7 50.1 67.6 35.2 53.4 72.0 37.5 59.9 80.8 42.1 66.4 89.6 46.6 69.7 94.1 48.9 81.1 86.0 95.8 102.4 110.5 118.7 122.0 109.5 116.1 129.3 138.1 149.2 160.2 164.6 57.0 60.4 67.3 71.9 77.6 83.3 85.6 135.0 182.2 94.8 151.4 204.3 106.3 Motors 150 Electrical 140 Oils & Chemicals 90 Heating Components Relief Valve Capacity Ratings (#air/min.) Tools & Instruments Accessories, Supplies & Commodities * Valves suitable for Ammonia use K-266 Refrigeration PART No 5220N 5221N 5223N 526E 5230 5231AN 5231BN 527E 5232 5240N1/2 5242N3/4 5340N1/2 5342N3/4* 5244N1 5344N1* 5244-1 5344-1* 5246N1 5246N1-1/4 5345N* 5346N1-1/4* 5611N* 5612N* Indoor Air Quality ATMOSPHERIC RELIEF VALVES Thermostats HENRY TECHNOLOGIES - PRESSURE RELIEF VALVES — Atmospheric, Angle & Straight-Thru Types Compressors, Chillers, Condensers Refrigeration Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 38 Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration HENRY TECHNOLOGIES - PRESSURE RELIEF VALVES — Atmospheric, Angle & Straight-Thru Types ANGLE RELIEF VALVES Atmospheric Relief Valves PART NO 5221N 5223N Connection Size Inlet Outlet 1/4” NPT Male 3/8” Flare 3/8” NPT Male 1/2” Flare 3/8” NPT Male 1/2” NPT Male 3/4” NPT Male 1” NPT Male 1” NPT Male 1” NPT Male 1/2” NPT Male 3/4” NPT Male 1” NPT Male 5/8” Flare 3/4” NPT Female 1” NPT Female 1” NPT Female 1-1/4” NPT Female 3/4” NPT Female 1” NPT Female Orifice Dia. (in) Weight Lbs. 0.188 .033 Dimension (in) A B C 3.16 3.28 3.58 3.94 3.74 4.16 5.7 3.74 Orifice Dia. (in) Weight Lbs. .038 .039 .041 4.16 - - 0.25 0.44 0.5 .085 .095 1.03 1.46 1.46 2.5 0.95 1.03 1.46 Orifice Dia. (in) 0.25 0.44 Weight Lbs. .06 1.25 0.312 0.375 0.5 0.531 0.312 Angeled Relief Valves PART NO 526E 527E 5600 5602 1/2” NPT Female 1/2” NPT Female 3/4” NPT Female Dimension (in) A B C 2.96 1.41 3.81 1.72 - 3/4” NPT Female 4.97 2.69 1.63 1/2” NPT Female 1/4” NPT Female 1-1/4” NPT Female 1-1/2” NPT Female Accessories, Supplies & Commodities K-267 3 .05 1” NPT Female Oils & Chemicals 5603 5604 Connection Size Inlet Outlet 3/8” NPT Male 3/8” Flare 1/2” NPT Male 5/8” Flare Tools & Instruments Refrigeration Dimension (in) A B C 2.5 - Straight Through Relief Valves PART NO 5230 5231 5231AN 5231BN 5232 5240N1/2 5242N3/4 5244N1 5244-1 5246N1 5340N1/2 5342N3/4 5344-1 5601 Thermostats Connection Size Inlet Outlet 1/4” NPT Male 3/8” NPT Male - 5.53 7.38 2.88 4.13 2.00 2.31 .07 4.75 6.50 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 39 A Rupture disc devices may be installed between a pressure relief and the vessel provided: The combination of the spring loaded safety relief valve and the rapture disc device is ample in capacity to prevent the pressure in the vessel from rising more than 10% above its design pressure. Since the capacity of a relief device pressure of the vessel. Use of a Rapture disc device in combination with a safety relief valve shall be carefully evaluated to ensure that the media being handled & the vales operational characteristics will result in pop action of the Relief Valve coincident with the busing of Rupture Disc. The stamped capacity of a spring loaded safety valve when installed with a rupture disc device between the inlet of the valve and the vessel shall be multiplied by a factor 0.90 of the rated relieving capacity of the Relief Valve alone. The space between capacity a Rupture Disc Device and a safety valve shall be provided with a pressure gauge, or suitable Telltale Indicator. This arrangement permits detection of Disc rupture or leakage. Be warned that a Rupture Disc will not burst at its design pressure if back up in the space between the disc and the safety relief valve which will occur should leakage develop in the Rupture Disc due to corrosion or other causes. K-268 The “Sentry” Rupture Disc Assembly/Relief Valve is shown with the Disc ruptured by High System Pressure. Note the System Pressure in the Chamber beneath the Relief Valve. (See bottom pressure gauge). The Relief Valve has discharged but reclosed, preventing the entire refrigerant charge from escaping into the atmosphere. Note: Relief valve, pressure gauge and pipe plug not included with “SENTRY” Rupture Disc Assembly. PART NO 5525-235-CE 5525-300-CE 5525-350-CE 5525-400-CE 5525-450-CE 5526-150-CE 5526-250-CE 5526-300-CE 5526-350-CE 5526-375-CE 5526-400-CE 5526-450-CE 5527-150-CE 5527-250-CE 5527-300-CE 5527-350-CE 5527-400-CE 5527-450-CE 5528-150-CE 5528-250-CE 5528-300-CE 5528-350-CE 5529-150-CE 5529-175-CE 5529-250-CE 5529-300-CE Size Conn. Inlet Outlet M.P.T F.P.T 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/4 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/4 D 2.55 2.55 2.55 2.55 2.55 2.85 2.85 2.85 2.86 2.86 2.86 2.86 3.19 3.19 3.19 3.19 3.19 3.19 3.67 3.67 3.67 3.67 3.75 3.75 3.75 3.75 Rupture Disc Setting 72°F PSI 235 300 350 400 450 150 250 300 350 375 400 450 150 250 300 350 400 450 150 250 300 350 150 175 250 300 Wt. Lbs. .61 .61 .61 .61 .61 .44 .44 .44 .44 .44 .44 .44 .76 .76 .76 .76 .76 .76 1.24 1.24 1.24 1.24 1.6 1.6 1.6 1.6 Motors Electrical The “Sentry” Rupture Disc Assembly/Relief Valve Combination is shown in its Normal operating condition with System Pressure only under the Rupture Disc [See top pressure gauge]. FEATURES • 5525 & 5526 brass series; 5626, 5627, 5628 & 5629 stainless steel series. • Tested, certified & ‘UD’ stamped to ASME Section VIII Div I. • Certified to conform to the PED 97/23/EC and bears the CE mark. • Prevent leakage or weeping of fluids through the relief Valve. • Extra gauge part for installation of a pressure switch to warn of a refrigerant release coursed by a system malfunction • A non- fragmenting rupture disc NOTES: The ASME Code, Section VIII, Division I guidelines for the application of Rupture Disc Devices in combination with pressure relief valves. The following excerpt is from the ASME Code, Section VIII, and Division I UG 127. 0.61 0.44 0.44 0.76 1.24 1.6 Heating Components 3/8 1/2 1/2 3/4 1 1 1/4 Indoor Air Quality 3/8 1/2 1/2 3/4 1 1 1/4 Wt. Lbs. Thermostats 5525 5526 5626 5627 5628 5629 Dimensions in Inches Orifice C D E F 2.55 0.77 1.25 AF 0.38 2.85 0.89 1.25 AF 0.50 2.86 0.90 1.13 0.50 3.19 1.13 1.50 0.75 3.67 1.25 1.75 1.00 3.75 1.31 2.00 AF 1.312 Oils & Chemicals B Outlet Accessories, Supplies & Commodities A Inlet Tools & Instruments Size Conn. PART NO Refrigeration HENRY TECHNOLOGIES - RUPTURE DISC ASSEMBLIES Compressors, Chillers, Condensers Refrigeration Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 40 HENRY TECHNOLOGIES - RUPTURE ASSEMBLY PRESSURE SWITCH Pressure Switch SW57 FEATURES: • Type: Direct action blade contact • Contacts: Silver alloy, gold plated • Set point: Factory set and sealed • Pressure Setting: 5 PSI • Switch Burst Pressure: 750 PSI • Ratings: 4 AMP- 24 VAC • Diaphragm: Teflon • Temperature Range: -40°F to +250°F • Connector: 1/8-27 NPT male thread • Terminals: Metri-Pack. ¼” blade • Circuitry: Normally opened • Base: Steel • Cover: Glass reinforced polyester Electrical Motors Compressors, Chillers, Condensers Refrigeration NOTES: The addition of the Pressure Switch provides inexpensive means of providing an electrical signal to warn of a refrigerant please caused by a system modification. An extra gauge part is provided on our Sentry Rupture Disc Assembly for the Pressure Switch. Furnished with Metri-Pack Connector and 10 ft. of wire Pressure Switch SW58 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components FEATURES: • Type: Single pole double throw • Contacts: General Purpose • Set Point: Factory set & sealed • Pressure setting: 5 PSI • Switch Burst Pressure: 9000 PSI • Ratings: 5AMP-12/24 VDC and 120/240 VAC • Diaphragm: Neoprene • Temperature Range: -40°F to +176°F • Connector: 1/8-27 NPT male thread • Terminals: 1/4" blade • Circuitry: Normally opened • Base: Stainless-steel • Cover: Glass reinforced polyester • Furnished with 10 ft. of wire HENRY TECHNOLOGIES - RUPTURE ASSEMBLY PRESSURE INDICATOR • Dial: 1-3/8” (35 mm), White Aluminum Dial with Red Marking • Dial: Maximum Working Pressure: 600 PSI • Case: AISI 304 Stainless Steel • Lens: Plexiglass, Watertight • Pointer: AISI 304 Stainless Steel • Socket: AISI 304 Stainless Steel • Ambient Temperature: –40°F / +150°F (–40°C / +65°C) NOTES: The Pressure Indicator (Item A) can be used with our Sentry Rupture Disc Assembly (Item B), which helps prevent leakage of both halocarbon and ammonia refrigerants by indicating whether the relief valve had discharged. The Sentry Rupture Disc Assembly, as required by ANSI/ASME Code, provides a chamber between the rupture disc and the relief valve, and a connection to install the new pressure indicator. This arrangement permits a positive indication that the disc has ruptured and the relief valve has discharged. The “Sentry” Rupture Disc Assembly/Relief Valve Combination is shown in its Normal operating condition with System Pressure only under the Rupture Disc. (See first pressure gauge.) NOTE: Relief valve, pressure gauge and pipe plug not included with “Sentry” Rupture Disc Assembly. PART NO G15 K-269 SIZE CONNECTION 1/8-in. MPT, Back Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 41 Refrigeration Compressors, Chillers, Condensers HENRY TECHNOLOGIES - TRANSDUCER VALVE - RUPTURE ASSEMBLY PRESSURE SWITCHES/INDICATORS SIZE CONN (in) Bottom Side 9290 1/4 MPT 2.38 DIMENSIONS (in) B C 1.19 1.56 D 4.16 WT(lb) .52 K-270 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components 1/8 FPT-1/4 FL A Electrical PART NO Motors • Forged Brass • Temperature Rating: –20°F (–29°C) to +300°F (+149°C) • Maximum Working Pressure: 500 PSI (35 kg/cm2) • Connector: 1/4" Flare Access with Schrader Core • Provides access to systems and mounting of a Transducer to monitor systems performance • Provides Schrader Valve port for checking Transducer output with a pressure gauge • Provides isolation from system for replacement of Transducer • Suitable for refrigerants and other industrial fluids non-corrosive to Brass and Steel Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 42 Motors Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS The A11 Series low temperature cutout controls incorporate a 20-ft long, vapor charged sensing element. The A11 reacts to the coldest 18-in. section of the controls sensing element. The A11 is suitable for monitoring the face temperature of hot water coils for freeze protection. SELECTION CHART PART NO SWITCH ACTION RANGE °F(°C) DIFF F°(C°) BULB AND CAPILLARY A11A-1C SPST - Open Low 35 to 45(2 to 7) Manual Reset 20 ft of 1/8-in.O.D. Tubing, 4 ft Cap. RANGE ADJUSTER Screwdriver Slot JOHNSON CONTROLS - A19 REMOTE BULB CONTROL SELECTION CHART Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Manual Reset DESCRIPTION The A19 Series are single stage temperature controls that incorporate liquid filled sensing elements. FEATURES • Wide temperature ranges available • Constant differential throughout the entire range • Compact enclosure ACCESSORIES A packing nut is available for closed tank application. Specify the part number FTG13A-600R, bulb wells (WEL14A Series) are available for liquid immersion applications. APPLICATIONS The A19 is suitable for temperature control in heating, ventilating, and refrigeration. SELECTION CHART PART NO SWITCH ACTION RANGE °F (°C) DIFF F° (C°) BULB AND CAPILLARY BULB WELL NO. (Order Separately) RANGE ADJUSTER MAX. BULB TEMP °F (C° WIDE RANGE - ADJUSTABLE DIFFERENTIAL SPST Open A19ABA-40C* Low A19ABC-4C SPDT +A19ABC-24C† SPDT +A19ABC-36C SPDT A19ABC-37C SPDT A19ABC-74C SPDT A19AAF-12C SPDT A19AAC-4C SPDT SPST Open Low A19AAD-12C –30 to 100 (–34 to 38) 3 to 12 (1.7 to 6.7) 3/8 in. x 4 in., 6 ft Cap. WEL14A-602R Screwdriver Slot 140 (60) WEL14A-603R Knob WEL14A-602R Convertible WEL14A-602R Convertible WEL14A-602R Screwdriver Slot WEL14A-602R Screwdriver Slot 170 (77) 140 (60) 140 (60) 140 (60) 140 (60) WEL14A-602R Screwdriver Slot 275 (135) WEL14A-602R Screwdriver Slot 140 (60) WEL14A-602R Screwdriver Slot 140 (60) 3/8 in. x 2-5/8 in., 6 ft Cap. WEL16A-601R Screwdriver Slot 190 (88) 2-1/2 (1.4) 3/8 in. x 4 in., 6 ft Cap. WEL14A-602R Screwdriver Slot 1-1/2 (0.8) 3/8 in. x 5-3/4 in., 6 ft Cap. WEL14A-603R Screwdriver Slot MANUAL RESET 140 (60) 140 (60) 50 to 130 (10 to 55) –30 to 100 (–34 to 38) –30 to 100 (–34 to 38) –30 to 100 (–34 to 38) –30 to 100 (–34 to 38) 3-1/2 to 14 (1.9 to 8) 3/8 in. x 5 in., 8 ft Cap. 3 to 12 (1.7 to 6.7) 3/8 in. x 4 in., 8 ft Cap. 3 to 12 (1.7 to 6.7) 3/8 in. x 4 in., 20 ft Cap. 3 to 12 (1.7 to 6.7) 3/8 in. x 4 in., 10 ft Cap. 3 to 12 (1.7 to 6.7) 3/8 in. x 4 in., 6 ft Cap. FIXED DIFFERENTIAL 25 to 225 (–4 to 107) 3-1/2 (1.9) 3/8 in. x 3 in., 10 ft Cap. CASE COMPENSATED — FIXED DIFFERENTIAL 0to80(–18 to27) 5(2.8) 3/8 in. x 4 in., 6ft Cap. –30 to 50 (–34 to 10) 2-1/2 (1.4) 3/8 in. x 4 in., 7 ft Cap. CLOSE DIFFERENTIAL A19AAD-5C** A19AAF-20C A19AAF-21C A19ACA-14C A19ACA-15C A19ADB-1C A19ADN-1 Refrigeration • Fixed or adjustable differential available • Variety of sensing element styles • Unaffected by cross-ambient conditions SPST Open 30 to 50 (–1 to 10) Low (Bulk Milk Cooler) SPDT –30 to 100 (–34 to 38) SPDT 40 to 90 (4 to 32) SPST Open Low SPST Open Low SPST Open High SPST Open HIgh 2-1/2 (1.4) –30 to 100 (–34 to 38) Manual Reset 3/8 in. x 4 in., 6 ft Cap. WEL14A-602R Screwdriver Slot 140 (60) –30 to 100 (–34 to 38) Manual Reset 3/8 in. x 4 in., 10 ft Cap. WEL14A-602R Screwdriver Slot 140 (60) 100 to 240 (38 to 116) Manual Reset 3/8 in. x 3-1/2 in. 6 ft Cap. WEL14A-602R 290 (143) 100 to 240 (38 to 116) Manual Reset 3/8 in. x 4 in., 6 ft Cap. K-271 Knob WEL14A-602R Screwdriver Slot 290 (143) Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 43 Refrigeration SELECTION CHART Manual Reset *Replaces White-Rodgers 1609-101. **Case-Compensated. †Replaces White-Rodgers 1609-12, -13; Ranco O10-1408, -1409, -1410, -1490, O60-110; + Universal Replacement Honeywell L6018C-1006, L6021A-1005, T675-1011, -1508, -1516, -1821, T4301A-1008, T6031A-1011, T6031A-1029. JOHNSON CONTROLS - SPECIAL PURPOSE THERMOSTAT (Rubber-Coated Bulb and Capillary) Motors Compressors, Chillers, Condensers JOHNSON CONTROLS - A19 REMOTE BULB CONTROL A19Series Electrical SELECTION CHART SELECTION CHART PART NO A19AAF-4C SWITCH ACTION RANGE °F(°C) DIFF F°(C°) SPDT 40 to 90 (4 to 32) 1-1/2 (0.8) Bulb and capillary Range Adjuster 3/8 in. * 5-3/4 in.Rubber-Coated 6 ft.Cap ScrewDriver slot Visible scale Max. Bulb Temp °F(°C) 140(60) Indoor Air Quality Heating Components DESCRIPTION This thermostat’s rubber-coated bulb is designed for direct immersion. FEATURES The rubber-coated bulb and capillary provide corrosion resistance APPLICATION • Designed for use in cooling towers SPECIFICATIONS • Maximum bulb temperature: 140°F (60°C) SELECTION CHART SPDT DIFF F°(C°) 0 to 150(-16 to 66) 5 (2.8) Fixed Bulb and capillary Bulb Well No.(order separately) 0.290 x 2 1/2 in.10 ft.Cap. WEL11A-601R Range Adjuster Max. Bulb Temp °F(°C) ScrewDriver slot 190(88) Tools & Instruments A19ANC-1C SWITCH ACTION RANGE °F(°C) K-272 Refrigeration PART NO Oils & Chemicals DESCRIPTION This is a remote bulb temperature control with a rainproof (NEMA type 3R) enclosure. FEATURES • Rainproof gasketed enclosure SPECIFICATIONS • Maximum bulb temperature 190°F (88°C) • Maximum ambient temperature: 140°F APPLICATION • Control of cooling tower sump heaters Accessories, Supplies & Commodities SELECTION CHART Thermostats JOHNSON CONTROLS - TEMPERATURE CONTROL WITH RAINPROOF ENCLOSURE Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 44 JOHNSON CONTROLS - THERMOSTAT FOR CROP DRYING SELECTION CHART A19 Series DESCRIPTION SPECIFICATIONS • Maximum bulb temperature The A19 series are single stage temperature controls that incorporate liquid filled sensing - A19AAE- 200ºF (93ºC) elements. - A19ABB- 240ºF (118ºC) FEATURES • Designed for high temperature applications • Narrow (2ºF fixed) or wide adjustable differentials. APPLICATION Crop drying thermostat energizes gas valve to maintain temperature. SELECTION CHART PART NO SWITCH ACTION RANGE °F(°C) A19AAE-3C A19ABB-2C SPST Open High SPST Open High 80 to 180(27 to 82) 50 to 200(10 to 93) Thermostats Oils & Chemicals Range Adjuster 1/8 in. 1 ¼ in.Copper-coiled 10ft cap. 0.290 in. x 2 1/2 in.10 ft. Cap. KnobExt.Scale KnobExt.Scale Max. Bulb Temp °F(°C) 200(93) 240(116) SELECTION CHART DESCRIPTION This is a universal replacement control for open high or SPDT applications. The control is furnished with a well assembly for ½ inch dappling. FEATURES • Liquid-filled element provides rapid response to temperature change • Adjustable differential • Universal replacement APPLICATIONS Operating control for water boilers. SELECTION CHART PART NO A19ABC-12C A19ADB-2C APPLICATION SWITCH ACTION Open High (R-B) SPDT Open Low (R-Y) Open High (R-B) SPDT Open Low (R-Y) High Temp Lockout Open High with Lockout RANGE °F(°C) DIFF °F(C°) RANGE ADJUSTER Convertible MAX BULB TEMP °F (°C) 6 to 24 (3 to 13) WELL CONN.SIZE-NPT 1/2 in. 100 to 240 (38 to 116) 100 to 240 (38 to 116) 6 to 24 (3 to 13) 1/2 in.8 ft. Cap. Convertible 290 (143) 100 to 240 (38 to 116) Manual Reset(locks out high) 1/2 in. Knob 250 (121) 250 (121) JOHNSON CONTROLS - AGRICULTURAL/INDUSTRIAL THERMOSTATS with NEMA 4X Enclouser A19 SELECTION CHART DESCRIPTION The A19PRC is a single stage electromechanical thermostat designed for heating and ventilation application. It features a rain tight enclosure for use in agricultural and industrial applications that require compliance with Article 547 of the National Electrical Code. The A19PRC has a rugged plastic enclosure that meets NEMA 4X specifications. FEATURES • An O-ring sealed set point adjustment Knob • Exposed portion of the liquid filled sensing elements are plated and plastic coated to resist damage inn corrosive atmospheres. APPLICATIONS Typical Application includes neither controlling ventilation nor heating equipment in animal confinement or industrial buildings. SELECTION CHART Tools & Instruments Accessories, Supplies & Commodities Bulb and capillary HOT WATER TEMPERATURE CONTROL (Well Immersion) A19ABC-11C Refrigeration DIFF F°(C°) (Factory SET) 2(1.1)Fixed 6 to 24(3 to 13) Adjustable JOHNSON CONTROLS - A19 SERIES HOT WATER TEMPERATURE CONTROL (Well Immersion) Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration PART NO A19PRC-1C SWITCH ACTION RANGE °F(°C) DIFF F°(C°) Bulb and Capillary SPDT 30 to 110(1 to 43) 3 to 12 1.7 to 6.7) 1 3/8 in. x 2 1/4 in. coiled K-273 Range Adjuster Knob Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 45 Refrigeration Compressors, Chillers, Condensers JOHNSON CONTROLS - A19 SERIES COILED BULB SPACE THERMOSTAT SELECTION CHART VENTILATING, HEATING SPST, Open High SPDT SPDT 35 to 95(0 to 35) 30 to 110(–1 to 43) 30 to 110(–1 to 43) 3.0 (1.7) Fixed 3.5 (1.9) Fixed 1.5 (0.9) Fixed 1-3/8 in. x 2-1/4 in. Coiled 1-3/8 in. x 2-1/4 in. Coiled 1-3/8 in. x 2-1/4 in. Coiled Knob Convertible Knob 140 (60) 140 (60) 140 (60) COOLING PART NO A19BBC-2C* SWITCH ACTION RANGE °F(°C) DIFF F°(C°) BULB AND CAPILLARY RANGE ADJUSTER SPDT –30 to 100(–34 to 38) 3 to 12 (1.7 to 7) 1-3/8 in. x 2-1/4 in. Coiled Convertible MAX BULB TEMP °F (°C) 140 (60) *Replaces White-Rodgers 201-16, -8, 2A37-1; Ranco 010-1418, -1802, 016-594, C30-C1101; Honeywell T631A, T696A, T6054 A1005. Universal Replacement JOHNSON CONTROLS - A19 SERIES WATER CHILLER CONTROL (With Locked Cutout/Adjustable Cut-in) SELECTION CHART DESCRIPTION Remote bulb temperature control with limited set point range, adjustable differential, and adjustable cut-out. FEATURES • Adjustable cut-out (38° to 47°F) • Wide differential adjustment range. ACCESSORIES • Include Part No. FTG13A-600R packing nut as standard. • Replacement cover: CVR61A-600R APPLICATIONS • Water chillers SPECIFICATIONS Maximum bulb temperature: 140°F (60°C) SELECTION CHART PART NO A19ZBA-1C SWITCH ACTION RANGE °F(°C) DIFF F°(C°) BULB AND CAPILLARY SPST Close High, Open Low 38 to 80(3 to 27) 8 to 40 (4 to 22) Adjustable 3/8-in. x 3-7/16 in., 6 ft Cap. K-274 BULB WELLNO (Order Separately) WEL14A-602R RANGE ADJUSTER Knob Heating Components A19BAB-3C A19BAC-1C A19BAF-1C MAX BULB TEMP °F (°C) Indoor Air Quality RANGE ADJUSTER Thermostats BULB AND CAPILLARY Oils & Chemicals DIFF F°(C°) Accessories, Supplies & Commodities RANGE °F(°C) Tools & Instruments SWITCH ACTION Refrigeration SELECTION CHART PART NO Electrical Motors DESCRIPTION Wide range temperature control with air coil sensing element. FEATURES • Wide temperature range • NEMA1 enclosure. APPLICATION • Return air or space temperature sensing To Order Specify the code number from the following selection chart. Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 46 JOHNSON CONTROLS - A19 DEFROST DURATION AND FAN DELAY CONTROL DEFROST DURATION AND FAN DELAY CONTROL SELECTION CHART DESCRIPTION Remote bulb control with adj. defrost termination temperature & preset fan delay temperature. FEATURES • Sensing element unaffected by barometer pressure & cross-ambient temperature problems. • Limited adjustment range. APPLICATION • Defrost termination control for refrigerated display cases. SPECIFICATIONS • Maximum bulb temperature: 140°F (60°C). • Fan delay temperature: factory set at 25°F (-4°C). Electrical Motors Compressors, Chillers, Condensers Refrigeration A19ZBC-2C DEFROST TERMINATION °F (°C) BULB AND CAPILLARY SPDT 45 to 85 (7 to 29) 19/64 in. x 3-1/8 in. 6 ft Cap. Knob SELECTION CHART DESCRIPTION This is a changeover control for use with combination heating and cooling thermostats. FEATURES • Automatically select the correct thermostat function APPLICATION Recommended for convertors, fan coils, and blast coil units, and similar devices. The A19CAC-2 can be mounted directly on either a vertical or a horizontal pipe, using the can mounting strap supplied with control. The A19CAC-1 has a remote bulb for greater mounting convenience. SPECIFICATIONS • Maximum case ambient temperature: 131°F (55°C) • Maximum bulb temperature: 250°F (121°C). Oils & Chemicals Refrigeration RANGE ADJUSTER AUTOMATIC CHANGEOVER WITH STRAP-ON MOUNTING SELECTION CHART PART NO A19CAC-1C A19CAC-2C SWITCH ACTION RANGE °F(°C) DIFF F°(C°) SPDT SPDT 60 to 90 (16 to 32) 60 to 90 (16 to 32) 10 (5.6) 10 (5.6) Tools & Instruments Accessories, Supplies & Commodities SWITCH ACTION JOHNSON CONTROLS - A19 SERIES AUTOMATIC CHANGEOVER WITH STRAP-ON MOUNTING Thermostats Indoor Air Quality Heating Components SELECTION CHART PART NO K-275 MOUNTING 42 in. cap. Direct Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 47 JOHNSON CONTROLS - A19 HOT WATER TEMPERATURE CONTROL WITH STRAP-ON MOUNT HOT WATER TEMPERATURE CONTROL WITH STRAP-ON MOUNT SELECTION CHART 100 to 240 (38 to 116) 10 (5.6) Clamp-on Strap Supplied NOTE: Replaces White -Rodgers 1127-2. A19DAC-1 not for use as a limit control. JOHNSON CONTROLS - FLANGE MOUNTED DUCT THERMOSTAT SELECTION CHART DESCRIPTION A wide-range temperature control with a special air coil sensing element and an adjustable mounting flange. FEATURES • SPDT snap-action switch • Unaffected by barometric pressure or cross-ambient temperatures • Flat flange mounting with the coil element permits positioning the sensing bulb in the appropriate portion of the air stream. APPLICATIONS These ducts thermostats are used on rooftop units, makeup-heaters, duct heaters, and air handling systems of all types. SELECTION CHART A19EAF-1C A19EAF-2C SWITCH ACTION RANGE °F(°C) DIFF F°(C°) SPDT SPDT 60 to 130 (16 to 54) 30 to 110 (–1 to 43) 2 (1.1) 2 (1.1) MAXIMUM BULB 200 (93) 140 (60) Tools & Instruments PART NO Indoor Air Quality SPDT MOUNTING Thermostats DIFF F°(C°) Oils & Chemicals RANGE °F(°C) K-276 Refrigeration A19DAC-1C SWITCH ACTION Accessories, Supplies & Commodities SELECTION CHART PART NO Heating Components Electrical Motors DESCRIPTION A SPDT, Strap-on, surface type hot water control for reverse action. Can be used as either an open high control or an open low control. FEATURES • Terminals are color-coded to simplify installation • Can be mounted on either a horizontal or a vertical rise pipe. • The insulated back portion of the case minimizes the effects of ambient temperature. • The SPDT switch action for high or low temperature detection. • Supplied with convertible range adjuster which provides either knob or screwdriver adjustment. Compressors, Chillers, Condensers Refrigeration Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 48 JOHNSON CONTROLS - HIGH RANGE TEMPRATURE CONTROL A19Series SELECTION CHART DESCRIPTION The A19 Series controls are single stage temperature controls that incorporate liquid-filling elements. Motors Compressors, Chillers, Condensers Refrigeration Heating Components Electrical FEATURES • Wide temperature ranges available • Constant differential throughout the entire range • SPST or SPDT snap-acting switches • Fixed or adjustable differential available • Unaffected by barometric pressure changes • Unaffected by cross-ambient conditions • Compact enclosure • Variety of sensing element styles APPLICATIONS The A19’s are suitable for temperature control in heating, ventilating, and refrigeration applications. Thermostats Indoor Air Quality SELECTION CHART PART NO A19AAB-4C A19AAB-7C A19AAB-10C A19AAC-9C Oils & Chemicals A19ABB-2C A19ABB-7C SWITCH ACTION RANGE °F(°C) DIFF F°(C°) (Factory SET) Bulb and capillary Bulb Well No. Range Adjuster 3 1/2(1.9) 3/8 in. x 5 in.copper 6 ft.Cap 3/16 in. x 9 1/2 in.copper 6 ft. Cap 3/16 in. x 6in.copper 8 ft.Cap 3/8 in. x 3-1/2 in.copper 6 ft.Cap 0.290 in x 2 1/2 in.10 ft cap 7.4 x 64 mmcopper 3m Cap WEL14A-602R WEL14A-602R ScrewDriver slotVisible scale KnobVisible scale WEL14A-602R Convertible 620(327) WEL14A-602R 290(143) WEL14A-602R ScrewDriver slotVisible scale KnobExt.Scale WEL14A-602R KnobVisible scale 240(116) SPST, Open High Remote Bulb 30 to 110(-1 to 43) Thermostat SPST ,Open High Oven 100 to 300(38 to 149) Thermostat SPST ,Open High Oven 200 to 550(93 to 288) Thermostat SPDT 100 to 240(38 to 116) SPST, Open High Remote Bulb Thermostat SPST, Open High Remote Bulb Thermostat 7 (3.9) 10(5.6) 6(3.3) 50 to 200(10 to 93) adj.6 to 24 (3 to 13) 60 to 201(10 to 94) adj.6 to 24 (3 to 13) Max. Bulb Temp °F(°C) 140(60) 350(177) 240(116) JOHNSON CONTROLS - INDUSTRIAL THERMOSTAT (Watertight and Dusttight) Refrigeration Tools & Instruments Accessories, Supplies & Commodities A19 SELECTION CHART DESCRIPTION Wide range temperature control with rainproof enclosure. SPDT switch, and 5°F fixed differential. APPLICATIONS Refrigeration, air conditioning and heating applications that require a NEMA 4 watertight and dusttight enclosure. SELECTION CHART PART NO A19KNC-1C SWITCH ACTION RANGE °F(°C) DIFF F°(C°) Bulb and capillary Bulb Well No. Range Adjuster SPDT 0 to 150(-15 t0 66) 5(2.8)Fixed 0.290*2 1/2 in.10ft. Cap WEL16A-600R Knob K-277 Sec#10f Refridge 49pages_Fridge 12/10/2010 1:57 PM Page 49 SELECTION CHART SWITCH ACTION RANGE °F(°C) DIFF F°(C°) Bulb and capillary SPDT SPDT SPDT -30 to 50 (-34 to 10) 20 to 80 (-7 to 27) 20 to 80 (-7 to 27) 5 (2.8) 3-1/2(1.9) 3-1/2(1.9) 3/8 in. * 4-1/16 in. 6 ft. Cap. 3/8 in.* 4-31/32 in.6 ft.Cap. Coiled Range Adjuster Bulb Well (if required) Knob Knob Knob WEL14A-602R WEL14A-603R WEL14A-603R Max. Bulb Temp °F(°C) 140(60) 140(60) 140(60) JOHNSON CONTROLS - THERMOSTAT FOR PORTABLE HEATERS(Chain Mount and Drop Cord Elecrical Connection) SELECTION CHART Thermostats Indoor Air Quality DESCRIPTION Sturdy compact thermostat designed especially for temporary installations. FEATURES • 6 foot extension cord with piggyback style plug • NEMA 1 enclosure • Chain mount APPLICATIONS • On/Off control of portable space heaters • Agriculture SELECTION CHART RANGE °F(°C) DIFF F°(C°) SPST Open High No Heat position 35 to 95 (2 to 35) 3 (1.7)Non-Adj. Max. Bulb Temp °F(°C) 140(60) Accessories, Supplies & Commodities A19BAG-1C SWITCH ACTION Tools & Instruments PART NO Oils & Chemicals A19AUC-1C A19AUC-1C A19BUC-2C K-278 Refrigeration PART NO Motors DESCRIPTION This thermostat provides remote bulb or coiled bulb sensing for hazardous environments. FEATURES • A precision enclosed switch and a liquid filled sensing element provides repeat accuracy that is unaffected by barometric pressure and cross-ambient temperature fluctuations. • The SPDT switch provides open high or close high action for heating or cooling • The electrical rating permits direct control of most equipment APPLICATIONS These thermostats are designed for use in grain elevators, chemical and powder plants, mines, oil refineries, and similar sites. For use in Class l, Group D and Class ll, Groups E, F, and G hazardous locations. Electrical SELECTION CHART Heating Components JOHNSON CONTROLS - THERMOSTAT FOR HAZARDOUS LOCATIONS Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 1 JOHNSON CONTROLS - Warm Air Limit Control with Manual Reset A25 Series SELECTION CHART DESCRIPTION The A25 warm air control locks out on temperature increase to the control set point. Manual reset is required before the electrical contacts can be enclosed. The A25 is normally located in a return air duct and is wired to shut down A/C or ventilating fans when the temperature of the air becomes excessively hot. FEATURES • TRIP-tree reset lever does not permit restarting unit until the reset lever is manually released. • The rod and tube type sensing element provides positive control action APPLICATIONS • High temperature out-put SPECIFICATIONS • Maximum element temperature: 300°F (149°C) Electrical Motors Compressors, Chillers, Condensers Refrigeration SWITCH ACTION RANGE °F(°C) DIFF F°(C°) Range Adjuster A25AN-1C A25CN-1C SPST Open High SPDT 25 to 215(-4 to 102) 25 to 216 (-4 to 102) Knob Knob High Limit Set at 125(52) High Limit Set at 125(52) Factory Manual approved Models PART NO SWITCH ACTION RANGE °F(°C) DIFF F°(C°) Range Adjuster A25AP-1C A25CP-1C SPST Open High SPDT 25 to 216 (-4 to 102) 25 to 216 (-4 to 102) Concealed ScrievDriver Slot Concealed ScrievDriver Slot High Limit Set at 125(52) High Limit Set at 125(52) JOHNSON CONTROLS - FOUR WIRE, TWO-CIRCUIT TEMPERATURE CONTROL A70 Series SELECTION CHART DESCRIPTION The A70 Series temperature control incorporates a vapor-charged sensing element. The A70G, A70H, A70K have a 4-wire, 2-circuit contact block that contains two isolated sets of contacts. The contacts are designed so that when the main contact opens, the auxiliary contact closes. FEATURES • Long-life, snap-acting contacts • Automatic or manual reset models APPLICATIONS Typical applications include energizing an indicator light and a low temperature cutout on a ventilating system. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components SELECTION CHART PART NO SELECTION CHART PART NO A70GA-1C(a) SWITCH ACTION MAIN CONTACTS AUXILIARY CONTACTS Open Low Close Low Range F°(C°) Diff F°(C°) 15 to 55(-1 to 15) 5(2.8) A70GA-2C Open Low Close Low 35 to 80(0 to 25) A70HA-1C(a) Open Low Close Low 15 to 55(-10 to 15) 3 to 30,Factory set at 12 (-11.1) Manual Reset A70HA-2C A70KA-1C Open Low Open High Close Low Close High 35 to 80(0 to 25) 100 to 770(38 to 77) Manual Reset Manual Reset BULB AND CAPILLARY 20 ft of 1/8 in.O.D. Tubing 3/8 in.*3 in.6 ft.Cap Max Bulb Temp F°(C°) 400 (260) Range Adjuster ScrewDriver Slot 250(121) ScrewDriver Slot 20 ft.of 1/8 O.D. Tubing 3/8 in.*3 in.6 ft. Cap 3/8 in.*10 in.6 ft. Cap 400(260) ScrewDriver Slot 250(121) 240(116) ScrewDriver Slot ScrewDriver Slot (a) The low cutout stop is set and sealed at 35°F (1.6°C). The control responds only to the lowest temperature along any one ft. of the entire 20ft. element or bellows cup. K-279 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 2 PART NO SWITCH ACTION Range F°(C°) Diff F°(C°) BULB AND CAPILLARY A36AHA-50C(a) 4 SPDT-Switches 65 to 95 (13 to 35) A36AHA-52C(a) 4 SPDT-Switches 65 to 95 (13 to 35) A36AHA-58C(b) 4 SPDT-Switches 0 to 70 (-18 to 21) A36AHB-33C(b) 4 SPDT-Switches 0 to 70 (-18 to 21) 2 Each Stage 1-1/2 Between Stages 2 Each Stage 1-1/2 Between Stages 2 Each Stage 1-1/2 Between Stages 2 Each Stage 1-1/2 Between Stages 3/8 in. x 5 1/4 in.w/12 in.Nylon Armor 3/8 in. x 5 1/4 in.w/12 in.Nylon Armor 3/8 in. x 4 3/4 in.15ft.Braid Armor Cap 3/8 in. x 4 3/4 in.15ft.Braid Armor Cap Range Adjuster WEL14A-603R Screw Driver Slot Calibrated Dia. Screw Driver Slot WEL14A-502R Screw Driver Slot WEL14A-502R Screw Driver Slot K-280 Motors Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals (a) Calibrated at mid switching point...computer room or comfort control. (b) Calibrated at low switching point...special close control chiller applications. Bulb Well No.(Order Separetely) WEL14A-603R Electrical DESCRIPTION The A36 series are four stage thermostats with open construction for use in panel mounting. FEATURES • Screwdriver slot adjustment w/calibrated dial enables movement of entire staging band within the range. ACCESSORIES • Enclosure: CSE57A-600 APPLICATIONS • Cycling control for multiple refrigeration compressors or unloading type compressors. SPECIFICATIONS • Maximum bulb temperature: - 120°F (49°C) in operation - 140°F (60°C) when sniping SELECTION CHART Heating Components SELECTION CHART Indoor Air Quality A36 Series Thermostats JOHNSON CONTROLS - FOUR STAGE REMORE BULB THERMOSTATS Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 3 JOHNSON CONTROLS - COOLING TOWER OR EVAPORATIVE CONDENSER CONTROLS (Single Stage Temperature Contr withOutdoor Enclosure) A72 Series SELECTION CHART DESCRIPTION The A72AE and A72CE are wide range temperature controls with heavy duty DPST contacts and neoprene coated sensing elements. APPLICATIONS • Control of cooling tower fans; motorized valves or solenoid operated valves. SPECIFICATIONS • Ambient temperature limits: -65 to 150°F (-54 to 66°C). • Maximum bulb temperature: 170°F (77°C). SELECTION CHART PART NO SWITCH ACTION RANGE °F(°C) DIFF F°(C°) BULB AND CAPILLARY A72AE-1C DPST Close High 25 to 90 (–5 to 30) 4 to 25 (2.2 to 14) A72CE-1C DPST Close High 25 to 90 (–5 to 30) 4 to 25 (2.2 to 14) 1-1/16 in. x 6-3/4 in. Neoprene Coated 6 ft. Cap. 1-1/16 in. x 6-3/4 in. Neoprene Coated 6 ft. Cap. RANGE Adjuster Internal Screwdriver Slot Internal Screwdriver Slot JOHNSON CONTROLS - TWO POLE HEAVY DUTY TEMPERATURE CONTROL(Adjustable Differential) SELECTION CHART DESCRIPTION The A72 Series temperature controls incorporate a vapor charged sensing element and heavy duty contacts. FEATURES • Double pole single throw contact block contain two isolated sets of contacts that make or break simultaneously. APPLICATIONS • Automatic control of heavy electrical loads. Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Refrigeration Tools & Instruments Accessories, Supplies & Commodities SELECTION CHART PART NO SWITCH ACTION RANGE °F(°C) DIFF F°(C°) BULB AND CAPILLARY Max Bulb Temp F°(C°) Range Adjuster A72AA-1C A72AA-2C A72AA-3C DPST Close High Open Low DPST Close High Open Low DPST Close High Open Low -30 to 30 (-34 to -1) 15 to 55 (-9 to 13) 50 to 90 (10 to 32) 4 to 25 (2 to 14) 3 to 30 (1.7 to 17) 3 to 30 (1.7 to 17) 200(93) 200(93) 135(57) ScrewDriver Slot ScrewDriver Slot ScrewDriver Slot A72AP-1C DPST Close High Open Low -10 to 65 (-23 to 18) 4 to 40 (2 to 22) 3/8 in.* 3in. C ft. Cap 3/8 in.* 3in. C ft. Cap 11/16 in.*6-3/4 in.Cross Ambient 6 ft. Cap 11/16 in.*6-3/4 in.Cross Ambient 6 ft. Cap 130(54) ScrewDriver Slot (a) Packing nut assembly available for direct immersion applications, Part No, FTG13A-800R. (b) Equipped with manual “PUSH TO START” button. Manual start feature is especially dose between closing and opening setting of switch. K-281 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 4 Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS - A72AA SERIES COILED BULB SPACE THERMOSTAT (Cooling) SELECTION CHART SELECTION CHART SWITCH ACTION RANGE °F(°C) DIFF F°(C°) BULB AND CAPILLARY RANGE Adjuster A72AA-4C DPST Close High Open Low 15 to 55 (–9 to 13) 3 to 30 (1.7 to 17) Coiled Copper Bulb ScrewDriver Slot K-282 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality PART NO Heating Components Electrical Motors DESCRIPTION The A72 is a space sensing thermostat with heavy-duty contacts APPLICATION Compressor cycling for walk-in coolers and freezers. Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 5 JOHNSON CONTROLS - A319 ELECTRONIC TEMPERATURE CONTROL ELECTRONIC TEMPERATURE CONTROL SELECTION CHART DESCRIPTION The A319 Series is a line voltage, single-stage electronic temperature control with Single-Pole, Double-Throw (SPDT) relay output and LED indication. The A319 features heating or cooling modes of operation, adjustable cut-in, adjustable differential, and an interchangeable temperature sensor. The A319 couples electronic accuracy with remote sensing capability in a NEMA 1 high-impact plastic enclosure suitable for surface or DIN rail mounting. FEATURES • Operates on 120 or 208/240 volts, which eliminates need for a separate transformer, saving installation time and cost. • Electronic circuitry improves accuracy and provides higher reliability than equivalent electromechanical controls. • Solid-state sensor handles remote sensing applications without the need for ambient compensation or other limitations of electromechanical temperature controls. • Interchangeable temperature sensors and mounting accessories allow flexibility in application; increasing versatility and serviceability. • Two models cover temperature ranges from -20 to 220°F (-30 to 105°C), reducing inventory by encompassing the temperature ranges required to support the majority of refrigeration and HVAC applications. • Wide adjustable differential of 1 to 30°F (0.5 to 17°C) enables the user to match equipment cycle rate for a given applications; maintains a tighter differential than typical electromechanical controls. • Field selectable mode jumpers work to control either heating or cooling equipment with LED indication of relay energization status. APPLICATIONS The A319 can be used to control a wide variety of single stage refrigeration or HVAC equipment. Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Typical applications include: • Frozen/refrigerated food cases. • Compressor lockout. • Beverage/milk coolers. • Condenser fan cycling. • Pump control (cooling lowers). • Boiler control. • Space and return-air temperature control • Immersion sensing for actuation of hot water and steam values in heating applications. SELECTION CHART PART NO DESCRIPTION A319ABC-12-01 A319ABC-24-01 A319 Temperature Control with Sensor(100 to 200 F range) A319 Temperature Control With Sensor(20 to 100 F range) ACCESSORIES PART NO DESCRIPTION TE-6300-608 TE-6300-610 SHL10A- 603R APD11A-600R BKT287-1R BKT287-2R PLT344-1R NTC Thermistor sensor with 8 ft (2.4 m) leads NTC Thermistor sensor with 12 ft (3.7 m) leads Sun shield for use with TE- 6300-608 And BOX10A-600R 1/2 in,dia, EMT conduit Adapter (box of 10)for use with BOX10A-600R 35 X 7.5 MM,0.305m(12 in)long D/N rail for use with A319 35 X 7.5 MM,0.914m(36 in)long D/N rail for use with A319 End clamps,(2) for DIN rail mounting of A319 controls K-283 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 6 SELECTION CHART DESCRIPTION The A419 series controls are line voltage, single-stage, electrical temperature controls with a SPDT output relay. They feature a lockable front-panel touched for setup and adjustment, and a Liquid Crystal Display for viewing the temperature and status of other functions. The A419 controls have heating and cooling modes, adjustable set point and differential, an adjustable anti-short cycle delay, and a temperature offset (setback) function. APPLICATIONS The A419 is used to control a wide variety of single-stage refrigeration or HVAC equipment. A419GBF-1C A419GEF-1C Line Voltage,NEMA 1 Enclousure A419 Series Electronic Temperature Control with Display, A99 Sensor included Line Voltage,NEMA 4X Enclousure A419 Series Electronic Temperature Control with Display, A99 Sensor included 24 VAC,NEMA 1 Enclousure A419 Series Electronic Temperature Control with Display, A99 Sensor included 24 VAC,NEMA 4X Enclousure A419 Series Electronic Temperature Control with Display, A99 Sensor included Supply Voltage:120 or 240 VAC RANGE :-30 to 212 F(-34 TO 100 C ) Diffrential:1 to 3CF(1 to 30 C) Supply Voltage:120 or 240 VAC RANGE :-30 to 212 F(-34 TO 100 C ) Diffrential:1 to 3CF(1 to 30 C) Supply Voltage:24 VAC,Class 2 RANGE :-30 to 212 F(-34 TO 100 C ) Diffrential:1 to 3CF(1 to 30 C) Supply Voltage:24 VAC,Class 2 RANGE :-30 to 212 F(-34 TO 100 C ) Diffrential:1 to 3CF(1 to 30 C) ACCESSORIES ITEM DESCRIPTION BKT287-1R BKT287-2R PLT344-1R CLK350-2C Accessory Mounting Hardware Accessory Mounting Hardware Accessory Mounting Hardware Digital Clock 12 in (305 mm)long DIN Rail 36 in (914 mm)long DIN Rail Two End Clams for DIN Rail Mounting 7 Days Programmable Digital Clock for controlling Temperature Offset Tools & Instruments PART NO Thermostats A419ACE-IC DESCRIPTION Oils & Chemicals A419ABC-1C ITEM K-284 Refrigeration PART NO Accessories, Supplies & Commodities SELECTION CHART Indoor Air Quality Heating Components Electrical Typical applications include: • Freezer control in convenience stores • Reach-in coolers • Supermarket display cases for produce or meats • Restaurant or convenience store walk-in coolers • Boiler control • Compressor lockout (display exceeds limits) • Condenser fan cycling • Pump control for cooling towers • Space and return air temperature Motors JOHNSON CONTROLS - A319 ELECTRONIC TEMPERATURE CONTROL Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 7 JOHNSON CONTROLS - TWO STAGE TEMPERATURE CONTROL A28 Series SELECTION CHART Coild Bulb-Fixed Differential Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration DESCRIPTION The A28 Series are two stage temperature controls that incorporate a liquid filled sensing element. FEATURES • Wide temperature ranges available • Constant differential throughout the entire range • SPDT snap action switches • Unaffected by changes in barometric pressure • Unaffected by cross ambient conditions • Compact enclosure • Variety of sensing element styles COILED BULB-FIXED DIFFERENTIAL PART NO SWITCH ACTION RANGE °F(°C) DIFF F°(C°) Bulb and capillary A28AA-4C 2-SPDT 30 to 110 (-1 to 43) 3 1/2(1.9) Ea.Stage 3(1.7)Fixed Between Stages 1 3/8 in.* 2 1/4 in.Coiled Accessories, Supplies & Commodities Tools & Instruments Bulb Well No.(order separately) -- Range Adjuster Convertible Case Compensated-Fixed differential PART NO SWITCH ACTION RANGE °F(°C) DIFF F°(C°) Bulb and capillary Bulb Well No. Range Adjuster A28AA-8C 2-SPDT -30 to 50(34 to 10) 3/8 in. * 4 in.6 ft.Cap. WEL14A-602R Knob A28AA-9C 2-SPDT(b) 20 to 80(-7 to 27) 5(2.8) Ea.Stage 3(1.7)Fixed Between Stages 3 1/2(1.9) Ea.Stage 3(1.7)Fixed Between Stages 3/8 in. * 5 in.6 ft.Cap(a). WEL14A-603R Knob Bulb and capillary Bulb Well No. (order seprately) -- Wide Range-Adjustible interstage differential PART NO Refrigeration APPLICATIONS Temperature sensing applications requiring two stage control of HVAC/ Refrigeration equipment. SPECIFICATIONS Maximum bulb temperature: • A28AA-37, 230°F (110°C) • All others, 140°F (60°C) ACCESSORIES • Packing nut assembly available for direct immersion applications • (Part No. FTG13A-600R) Remote bulb models include 5/8 in. mounting clip. SWITCH ACTION RANGE °F(°C) A28AA-28C 2-SPDT(d) 30 to 110(-1 to 43) A28AA-29C A28AA-36C A28AA-37C A28AJ-4C 2-SPDT(b) 2-SPDT 2-SPDT 2-SPDT -30 to 100(-34 to 38) 40 to 90(4 to 32) 60 to 140(16 to 60) 20 to 80 (-7 to 27) DIFF F°(C°) 3 1/2 (1.9)Ea.Stage 2 to 7 Adj.Between 12 ft averaging bulb 6 ft. Cap. Stages 5(2.8)Ea.Stages 2 to 7 Adj.Between Stages 3/8 in.**4 in. 6 ft.Cap. 3 Ea.Stages 2 to 7 Adj. Between Stages 3/8 in.*5 3/4 in.6 ft. Cap. 5 Ea.Stage 2 to 7 Adj. Between Stges 3/8 in.*4 in.6 ft.CAP. 2 Ea.Stage 2 TO 7 adj. Between Stages 3/16 in.*22 in.6 ft.Cap. WEL14A-502R -WEL14A-602R -- Range Adjuster ScrewDriver Slot Convertible Knob Knob Knob ChangeOver Control PART NO A28AB-1C A28AB-2C(c) (a) (b) (c) (d) SWITCH ACTION RANGE °F(°C) DIFF F°(C°) Bulb and capillary 2-SPDT(b) 2-SPDT(d) 20 to 80 (-7 to 27) 60 to 90(16 to 32) 3 1/2 (1.9) 6(2.8) 3/8 in.*5 in.6 ft. Cap. Strap-on Grid Blue 42 in.Cap. Bulb Well No. (order seprately) WEL14A-603R -- Packing not assembly available for direct immersion applications (Par No.FTG13A-600R) Switches with in 1°F (0.6°C) of each other. Maximum sensing element temperature is 250°F (121°C) Switches within 5°F (3°C). K-285 Range Adjuster ScrewDriver Slot ScrewDriver Slot Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 8 Refrigeration Compressors, Chillers, Condensers JOHNSON CONTROLS - A28 SERIES TWO-STAGE FLANGE MOUNTED DUCT THERMOSTAT TWO-STAGE FLANGE MOUNTED DUCT THERMOSTAT SELECTION CHART SELECTION CHART SWITCH ACTION RANGE °F(°C) NUMBER OF STAGES A28AK-1 A28AK-2 2-SPDT Switches 2-SPDT Switches 30 to 110 (–1 to 43) 60 to 130 (16 to 54) 2 2 DIFFERENTIAL F° (C°) FIXED Each Stage FIXED Between Stage 2 (1.1) 2 (1.1) 3 (1.7) 3 (1.7) MAXIMUM ALLOWABLE TEMPERATURE AT BULB °F (°C) 140 (60) 200 (93) Indoor Air Quality JOHNSON CONTROLS - TWO STAGE INDUSTRIAL THERMOSTAT(Watertight and Dusttight) A28 SELECTION CHART Oils & Chemicals Thermostats DESCRIPTION The A28KA is a wide range temperature control with gasketed enclosure and two SPDT switches. APPLICATIONS This control is for refrigeration, air conduction and heating applications. This control incorporates gasketed enclosures that can be used in a range of industrial and general purpose applications. FEATURES • Rugged steel enclosure • Liquid filled sensing element that provides uniform control SELECTION CHART SWITCH ACTION Range Diff Bulb and Capillary A28KA-1C 2-SPDT 0 to 150 (-15 t0 65) 5 (2.5) Ea.Stage 3(1.7) Fixed Between stages 8.290 *2/1/2 in 10ftCap Bulb Well No. (order separately) WEL16A-600R Range Adjuster Knob K-286 Refrigeration Tools & Instruments PART NO Accessories, Supplies & Commodities PART NO Heating Components Electrical Motors DESCRIPTION The A28AK is a two-stage temperature control with special air coil sensing element and adjustable mounting flange. APPLICATIONS These duct thermostats are used on the roof top unit make up heaters, and air handling systems of all types. FEATURES • Flat flange mounting with special coils elements permits positioning of sensing bulb in the appropriate portion of the air stream. • 2 SPDT snap acting switches. • Unaffected by barometric pressure or cross ambient temperatures. Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 9 JOHNSON CONTROLS - TWO STAGE TEMPERATURE CONTROL WITH WEATHERPROOF ENCLOSURE A28 SELECTION CHART DESCRIPTION The A28MA controls are wide range temperature controls with rainproof NEMA 3R Enclosure and SPDT switches. APPLICATIONS • Sump water temperature control for cooling towers and evaporative condensers • Fan cycling control to air cooled condensers FEATURES • Rugged steel enclosure • Liquid filled sensing element (provides uniform control) Electrical Motors Compressors, Chillers, Condensers Refrigeration SELECTION CHART A28MA-2C Range F°(C°) BULB AND CAPILLARY Range Adjuster SELECTION CHART DESCRIPTION The A28PJ is a two stage electromechanical thermostat with rain tight & dust tight enclosure. FEATURES • Rugged thermoplastic gasketed enclosures that meet NEMA 4X specifications. • O-ring sealed set point adjustment knobs. • Range scale with oversized white markings for easy readability in low light. • Exposed portion of liquid filled sensing elements are plated and plastic coated to resist damage in corrosive atmospheres. Oils & Chemicals Refrigeration Diff F°(C°) A28 APPLICATIONS Designed for use in agricultural and industrial applications that require compliance with Article 547 of the National Electrical Code. SELECTION CHART PART NO SWITCH ACTION Range F°(C°) Diff F°(C°) BULB AND CAPILLARY Range Adjuster A28PJ-1C 2-SPDT 30 to 110(-1 to 43) 2(1.1) Ea. Stage2-7 (1.1-3.9) Adj. Between Stages 1 3/8 in.*2 1/4 in. Coiled Knob Tools & Instruments Accessories, Supplies & Commodities SWITCH ACTION 2 Stage 2-SPDT Switches 40 to 120 (4 t0 49) Factory set 5(2.8) Each Stage 3/8 in.*4in.Neaoprene Screw Driver Slot 8 (4.4) Between Stages Coated 6ft Cap 2 Stage 2 SPDT Switches 40 to 120 (4 t0 49) 3/8 in* 4 1/6 in. 6 ft Cap. Screw Driver Slot JOHNSON CONTROLS - TWO STAGE AGRICULTURAL THERMOSTAT WITH NEMA 4X ENCLOSURE Thermostats Indoor Air Quality Heating Components PART NO A28MA-1C K-287 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 10 Refrigeration Compressors, Chillers, Condensers JOHNSON CONTROLS A99B Series Temperature Sensor Description Motors provides configurations for many variety of control applications • stainless steel sensing bulb allows use in A99B Temperature Sensors more applications than other types of bulbs without corrosion • lead length may be extended up to 800 ft Selection Chart Applications Description A99BA-200C PTC Silicon Sensor with Shielded Cable; Cable length 6-1/2 ft (2 m); Range: -40 to 212°F (-40 to 100°C) PTC Silicon Sensor with PVC Cable; Cable length 9-3/4 in. (0.25 m); Range: -40 to 212°F (-40 to 100°C) A99BB-25C A99BB-200C A99BB-300C A99BB-500C A99BB-600C A99BC-25C PTC Silicon Sensor with PVC Cable; Cable length 6-1/2 ft (2 m); Range: -40 to 212°F (-40 to 100°C) PTC Silicon Sensor with PVC Cable; Cable length 9-3/4 ft (3 m); Range: -40 to 212°F (-40 to 100°C) PTC Silicon Sensor with PVC Cable; Cable length 16-3/8 ft (5 m); Range: -40 to 212°F (-40 to 100°C) PTC Silicon Sensor with PVC Cable; Cable length 19-1/2 ft (6 m); Range: -40 to 212°F (-40 to 100°C) The A99B temperature sensor line offers an economical solution for a wide variety of temperature sensing needs in refrigeration and HVAC applications. Typical temperature sensing applications and environments include: • freezers • display cases • walk-in coolers • reach-in coolers • defrost termination temperature sensing • condenser fan cycling • space and return air temperature sensing • outdoor air sensing • process cooling and heating Technical Specifications A99B Series Temperature Sensor PTC Silicon Sensor with High Temperature Silicon Cable; Sensing Range Cable length 9-3/4 in. (0.25 m); Range: -40 to 248°F (-40 to 120°C) A99BC-300C PTC Silicon Sensor with High Temperature Silicon Cable; Cable length 9-3/4 ft (3 m); Range: -40 to 248°F (-40 to 120°C) A99BC-500C A99BC-1500C A99BA -40 to 212°F (-40 to 100°C) A99BB A99BC -40 to 248°F (-40 to 120°C) Reference Resistance 1035 ohms at 77°F (25°C) Accuracy 0.9°F ( 0.5°C) PTC Silicon Sensor with High Temperature Silicon Cable; between 5 and 167°F (-15 and 75°C) Cable length 16-3/8 ft (5 m); Range: -40 to 248°F (-40 to 120°C) Sensor Construction Stainless Steel Probe Sensor Lead A99BA Shielded PVC Cable PTC Silicon Sensor with High Temperature Silicon Cable; Wire Insulation A99BB PVC Cable A99BC High Temperature Silicon Cable Cable length 49 ft (15 m); Range: -40 to 248°F (-40 to 120°C) Accessories Lead Wire Gauge 22 AWG Maximum Allowable Bulb Temperature 257°F (125°C) Part Number Description A99-CLP-1 Surface Mounting Clip for the A99B Temperature Sensor Ambient Operating A99BA A99BB -40 to 212°F (-40 to 100°C); 0 to 100% RH, Condensing ADP11A-600R 1/2 in. diameter EMT Conduit Adapter (box of 10) for use Conditions with BOX10A-600R PVC Enclosure A99BC BOX10A-600R SHL10A-600R Sun Shield for Single Sensor Ambient Storage Conditions A99BA A99BB -40 to 248°F (-40 to 120°C); 0 to 100% RH, Condensing 40 to 221°F (-40 to 105°C); 0 to 100% RH, Condensing SHL10A-603R Sun Shield for Two Sensors WEL11A-601R Immersion Well Indoor Air Quality Part Number Thermostats cycling. Heating Components provides excellent performance in a wide Electrical applications • exceptional accuracy of sensing element Oils & Chemicals Applications include temperature sensing for freezers and coolers, as well as in defrost termination sensing, space and return air temperature sensing, and condenser fan • an assortment of mounting hardware K-288 A99BC -40 to 266°F (-40 to 130°C); 0 to 100% RH, Condensing Accessories, Supplies & Commodities applications. Several accessories allow easy tailoring of the temperature sensor to various mounting configurations. encompass most application requirements and simplify wiring sensors Tools & Instruments temperature in a variety of refrigeration Features • variety of lead lengths available to Refrigeration The A99B Series Temperature Sensors are passive PTC (Positive Temperature Coefficient) sensors. The A99B sensors are splashproof and are designed to measure Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 11 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS - Bulb Wells Selection Chart (WEL Series Bulb Wells) DESCRIPTION Bulb Wells are used in conjunction with Remote Bulb Temperature Controls where bulb insertion into a vessel or container to sense temperature is required. WZ Series wells are used with TE-6000 and TE-6300 sensors. A variety of shapes, sizes, and materials are available for a wide range of applications. Refer to the appropriate temperature control for the exact bulb well required. The Code No. FTG13A-600R packing nut assembly is used in applications where the temperature does not fall below -35°F (-37°C). The maximum liquid pressure limit is 150 psig (1034 kPa). Use with Style 1, 3/8” diameter bulb for direct immersion application. A19 require models with support tube, A70 and A72 do not need support tubes. PART NO WEL11A-601R WZ-1000-2 WZ-1000-4 WZ-1000-5 WEL14A-600R (a) WEL14A-601R (a) WEL14A-602R (a) WEL14A-603R (a) WEL16A-600R WEL16A-601R WEL17A-600R(b) WEL17A-601R(b) WEL17A-602R(b) WEL17A-603R(b) WEL17A-604R(b) WEL17A-606R(b) WEL18A-600R(b) WEL18A-601R (b) WEL18A-602R(b) See Figure A (in) 2 1 1 2 3 3 3 3 2 2 1 1 1 1 1 1 1 1 1 Dimension B (in) C (in) 2-3/8 5-1/4 5-1/4 2-3/8 4-3/4 7-9/16 4-15/16 5 13/16 2-3/8 2-13/16 10-7/16 8-11/16 10-7/16 10-7/16 14-13/32 8-11/16 3-1/2 3-1/2 3-1/2 2-5/16 1-1/4 1-1/4 2-5/16 1-13/16 1-13/16 1-13/16 1 13/16 1-5/16 1-13/16 3/4 3/4 3/4 3/4 3/4 1-3/32 3/4 3/4 3/4 Material Connector Max. Temp Material Tube Max. °F Pressure PSIG .299 Brass 250 Copper 300 .500 Stainless steel 300 Stainless steel 400 .500 Stainless steel 600 Stainless steel 400 .299 Malleable 250 Brass 300 .444 Monel 700 Monel 1000 .430 Brass 250 Copper 300 .430 Brass 250 Copper 300 .430 Brass 250 Copper 300 .299 Brass 250 Copper 300 .375 Brass 250 Copper 300 .763 Malleable 250 Copper 250 .763 Malleable 250 Copper 250 .753 Malleable 250 Steel 540 .753 Monel 700 Monel 1000 .763 Malleable 250 Copper 250 .755 Monel 700 Monel 1000 .773 Malleable 250 Steel 150 .773 Monel 700 Monel 1000 .773 Malleable 250 Brass 150 (a) For 3/8” style 1 bulbs (b) For 11/16” diameter style 4 bulbs. Style 1 can be used, but is not fastened into well. Pipe Thread Inside D Outside E (in) (in) -1/2 1/2 -------1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Plating -----Brite-Dip Brite-Dip Brite-Dip --Tin Tin Tin -Tin -Tin -Tin See Note Figure 1 3 -3 2 2 2 2 1 2 ---------- 2 1 1 2 3 3 3 3 2 2 1 1 1 1 1 1 1 1 1 Type of Solder Joint Soft ---TIG weld Silver Silver Silver Soft Soft Silver Silver Silver TIG weld Silver TIG weld Silver TIG weld Silver NOTE 1: With phenolic bushing; 0.093” slot NOTE 2: With phenolic bushing; 0.125” slot NOTE 3: Includes thermal compound Selection Chart (T-800 Wells) PART NO DESCRIPTION T-800-1605 T-800-1606 T-800-1618 Brass well, 6-1/2 inch Stainless steel well, 5-1/4 inch Brass well, 9-1/2 inch T-800-1620 T-800-1624 Brass well, 9-1/2 inch Dual brass well, 6-1/2 inch K-289 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 12 Refrigeration Compressors, Chillers, Condensers JOHNSON CONTROLS G Series GRD10A-609 Rectangular Clear Plastic Guard Features Applications The G Series guards protect thermostats and humidistats from damage, vandalism, tampering, and unauthorized adjustment. They are available in plastic, cast aluminum, or wire construction. • clear plastic guards have tumbler-type key locks • GRD10A-608 and -609 include a mounting ring for mounting to a wall or flat surface • plastic baseplate and plastic mounting ring available • the baseplate mounts to a flat surface or to a single or double outlet box • the mounting ring permits mounting over a thermostat or humidistat already installed Ideal for locations where locked protection is required, such as schools, warehouses, churches, hospitals, or offices. Selection Chart Thermostat or Humidistat Series Number Part Number Description GRD10-1R GRD10A-600 GRD10A-601 GRD10A-606 GRD10A-608 GRD10A-609 Wire guard only Wire guard and baseplate Aluminum guard and baseplate Plastic guard with baseplate Plastic guard with baseplate, mounting ring Plastic guard with baseplate, mounting ring 122 126 ----- 128 No Switches --- T91 Tools & Instruments Repair Parts Replacement key KEY12A-600 (set of two) is available. 125 Oils & Chemicals Thermostats Description Indoor Air Quality GRD10A-608 Large Clear Plastic Guard Accessories, Supplies & Commodities GRD10A-601 Cast Aluminum Guard K-290 Refrigeration GRD10-1R Wire Guard Heating Components Electrical Motors Thermostat and Humidistat Guards Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 13 JOHNSON CONTROLS Thermostat and Humidistat Guards (Continued) Technical Specifications Motors Compressors, Chillers, Condensers Refrigeration 5.00 127 Electrical 3.38 86 6.19 157 4.75 121 1.41 36 Heating Components Indoor Air Quality 6.75 171 3.63 92 2.53 64 4.19 2.69 106 68 7.69 Thermostats 6.38 162 4.75 121 3.31 84 6.75 171 Accessories, Supplies & Commodities 1.63 41 Tools & Instruments 2.69 68 4.19 106 5.31 135 5.81 4.69 119 148 Refrigeration 1.63 41 3.69 94 195 Oils & Chemicals 2.88 73 1.63 41 6.56 167 3.31 84 G Series Dimensions, in. (mm) K-291 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 14 Selection Chart Factory Setting – psig (kPa) PART NO Max. Temperature Switch Action Range psig (kPa) Differential psi (kPa) P20BB-1C(a) P20DB-1C(b) P20EB-1C(c) P20EB-2C(d) 140°F 140°F 140°F 140°F Open On Fall Open On Rise SPDT SPDT 7 to 150(48 to 1034) 100 to 425(690 to 2930) 7 to 150(48 to 1034) 100 to 425(690 to 2930) Manual Reset Manual Reset 30 (172)Fixed 75 (483)Fixed Opens Closes 40(276) 400(2758) 40(276) 400(2758) Lockout Lockout 70(448) 324(2275) Max Bellows Pressure psig (kPa) 250(1724) 450(3103) 250(1724) 450(3103) K-292 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals (a) Replaces Ranco G20-4412; Robertshaw 3126-216, 3160-212 (b) Replaces Ranco G23-5253; Robertshaw 3127-220, 3161-205; Honeywell P430X-1250, 1268, 1292, 1300 (c) Replaces Ranco G20-4050; Robertshaw 3126-116, 3160-012, 3160-014; Honeywell P431X-1092, 1100 (d) Replaces Ranco G23-5052; Robertshaw 3127-140, 3127-414, 3161-009; Honeywell P430X, 1235, 1243, 1276, 1284 Universal Replacement Thermostats SELECTION CHART Indoor Air Quality Heating Components DESCRIPTION The P20 Series are field replacement high and low pressure controls for non-corrosive refrigerants. They include a dust-tight contact unit with quick connect connectors and a 36” capillary with the ¼” sweat section. The set point is screwdriver adjustable. FEATURES • Accurate repeatability • Compact size • Trip-free manual reset APPLICATIONS • Air conditioning high/low pressure control • Refrigeration high/low pressure control • Head pressure control Motors P20 Series Electrical JOHNSON CONTROLS - Air Conditioning/Pressure Cutout Control Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 15 Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS - Steam Pressure Limit Control P47 Series Selection Chart Contacts Open On Rise – Automatic Reset DESCRIPTION The P47 controls are available with SPST, DPST, or 4-wire, two-circuit contacts for line voltage or low voltage. The pressure connector is 1/4 in. male NPT (0-15 psig only) or 1/4 in. female NPT (for all other ranges). FEATURES • Long-life contact structure with high contact force • Easy-to-adjust single sight set scales show both cut-in and cut-out settings APPLICATIONS P47 steam pressure controls are designed for high limit or operating control applications. A typical use is as a limit control on steam heating systems. Models that close on a pressure increase are used on steam unit heaters to avoid blower operation when steam pressure is below the point required for adequate heating. The P47 can be used with steam, water, air, or noncombustible gases that do not harm iron or copper. ACCESSORIES Part No. TBG16A-600R Siphon is supplied with all controls except models with 0 to 15 psig range. SELECTION CHART P47AA-1C P47AA-4C P47AA-13C Range Min 1 1 1 0 to 15 psig(0 to 103 kPa) 20 in. Hg to 50 psig(-68 to 345 kPa) 0 to 150 psig(0 to 1034 kPa) 2 (14) 5 (34) 12 (83) 8 (55) 35(241) 50(345) Max Overpressure psig (kPa) 50 (345) 180 (1241) 325 (2241) Contacts Close On Rise – Automatic Reset Differential psi (kPa) Max PART NO Number of Poles Range Min P47BA-1C P47BA-6C 1 1 0 to 15 psig(0 to 103 kPa) 0 to 150 psig(0 to 1034 kPa) 2 (14) 12 (83) Number of Poles Range Min MainOpen HighAuxiliaryOpen Low 0 to 150 psig(0 to 1034 kPa) 12 (83) 8 (55) 50(345) Max Overpressure psig (kPa) 50 (345) 325 (2241) SPDT – 4-Wire Two Circuit(a) – Automatic Reset PART NO P47GA-9C (a) Differential psi (kPa) Max (a) The main contacts (Line-M2) open on rise, as the auxiliary contacts (Line-M1) close. Tools & Instruments Refrigeration Differential psi (kPa) Max Number of Poles Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality PART NO K-293 50(345) Max Overpressure psig (kPa) 325 (2241) Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 16 Selection Chart DESCRIPTION The P61 Series Pressure Switches automatically control residential water pumps, small air compressors (not requiring mechanical release valves), and other electrically-operated pressure equipment. They use a Double-Pole/Single-Throw (DPST) switch that opens on pressure rise. The P61 switches are enclosed in a compact NEMA 1 case and are available with a choice of four standard ranges. FEATURES • Small size, narrow design, and small turning radius allow control to fit in tightly-spaced applications • Nylon-reinforced Buna-N diaphragm provides long life and trouble-free operation • Large screw-type terminals allow quick and easy wiring Motors P61 Series Electrical JOHNSON CONTROLS - Pressure Switch Compressors, Chillers, Condensers Refrigeration 15 (103) 4 (28) 16 (110) 25 (172) 30 (206) 11 (76) 38 (262) 40 (276) (a) Cut-in = Cut-out - Diff. SPECIFICATIONS Tools & Instruments P61 SERIES PRESSURE SWITCH 120 VAC 240 VAC 32 VDC (1, 2, 3 Phase) (1, 2, 3 Phase) Horsepower 1 1 1/4 Contact Ratings Full Load Amps 16 8 8.6 Locked Rotor Amps 96 48 86.0 Contact Unit Snap-acting High Contact Force Diaphragm Nylon Reinforced Buna-N Case 0.062 in. (1.57 mm) Cold Rolled Steel Material Cover 0.032 in. (0.8 mm) Cold Rolled Steel Finish Gray Baked Enamel Conduit Openings Two 0.88 in. (22 mm) Diameter Holes for 1/2 in. Conduit Enclosure NEMA 1 Wiring Connections Screw Type Terminals UL Guide No. NKPZ, NKPZ7, File EZ9374 Agency Listings CSA Class 3211 06, File LR948 Ambient Operating Conditions 0 to 77°F (-18 to 25°C) Dimensions (H x W x D) 3.98 X in. (101 x 74 x 50 mm) x 2.92 x 1.97 Yes(Snap-in) Yes(Snap-in) Yes(Snap-in) Yes(Snap-in) Max Overrun Pressure 175 psi 175 psi 250 psi 250 psi Indoor Air Quality 15 to 70 (103 to 483) 6 to 30 (41 to 207) 40 to 100 (276 to 700) 90 to 150 (600 to 1000) Pulsation Orifice Thermostats 20 (138) 8 (55) 60 (414) 95 (655) PRESSURE CONNECTOR 1/4 in. NPTF 1/4 in. NPTF 1/4 in. NPTF 1/4 in. NPTF Oils & Chemicals 40 (276) 15 (103) 85 (585) 125 (860) Differential psi (kPa) Min Max Accessories, Supplies & Commodities P61AA-6C P61AA-35C P61NA-2C P61NA-4C Cut-out Range psig (kPa) K-294 Refrigeration PART NO Heating Components SELECTION CHART Factory Setting psig (kPa) Cut-in Opens Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 17 JOHNSON CONTROLS - Low Pressure Control P67 Series Selection Chart DESCRIPTION P67 pressure controls are used to close or open an electrical circuit, based on a predetermined air pressure signal. The operating point of the control and the differential, are easy to adjust with the externally-located adjustment screws on the top of the control enclosure. The pressure controls incorporate a non-metallic diaphragm that is positioned by air pressure changes. The diaphragm, in turn, actuates a heavy-duty electrical contact block using a lever mechanism. Motors Compressors, Chillers, Condensers Refrigeration APPLICATIONS Typical applications include the control of air compressors, fans, pilot lights, resistance heating elements, and other devices. SELECTION CHART PART NO P67AA-1C Scale Range psig(a) (kPa) DPST opens on pressure drop 3 to 30(21 to 207) P67CA-1C DPST opens on pressure rise 3 to 30(21 to 207) P67EA-5C L-M2 contacts connect on pressure rise and simultaneously the L-M1 contacts break L-M2 contacts break on pressure rise and simultaneously the L-M1 contacts make 3 to 30(21 to 207) P67FA-5C Control Action 3 to 30(21 to 207) Differential psi (kPa) 1 1/2-20(10 to 138)Adjustable 1 1/2-20(10 to 138)Adjustable 1 1/2-20(10 to 138)Adjustable 1 1/2-20(10 to 138)Adjustable Accessories, Supplies & Commodities Tools & Instruments Refrigeration Temperature Range MAXIMUM OVERPRESSURE psig (kPa) 32 to 140°F 0 to 60°C 50 (345) Angle Barbed Fitting 32 to 140°F 0 to 60°C 50 (345) Angle Barbed Fitting 32 to 140°F 0 to 60°C 50 (345) 1/8 in.Male NPT 32 to 140°F 0 to 60°C 50 (345) 1/8 in.Male NPT (a) Range is minimum cut-out to maximum cut-in on Open Low controls. It is minimum cut-in to maximum cut-out on Open High controls. Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical FEATURES • Long-life contact structure, high contact force • Easy-to-adjust settings: single sight-set scales show both cut-in and cut-out settings K-295 Connector Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 18 APPLICATIONS • P70C, P70D P170C and P170D models With Single-Pole Single-Throw (SPST) Open-high switch action are the most popular models, and are typically used for high-pressure cutout. The C models are automatic reset. The D models have a manual reset lockout mechanism. Some P70C, P70D P170C and P170D models are UL Listed as refrigeration pressure limiting controls. • P70A and P170A models are available with SPST Open-low switch action, and typically are used for condenser fan cycling control. • P70 and P170 models with Single-Pole Double-Throw (SPDT), or 4-wire, 2-circuit switch action allow users to install alarm devices or other control circuits. • P72 models have a Double-Pole Single- Throw (DPST) switch with load-carrying contacts that can provide direct control of 208-240 V single-phase motors up to 3 hp, and 208-220 V 3-phase motors up to 5 hp Refer to DPST Electrical Ratings (P72A, B, C, and D Models) on Page 3. NEMA 1 Enclosures are standard on most models. NEMA 3R Enclosures are also available. Motors Electrical Heating Components FEATURES • All-steel case and cover provides long lasting, rugged protection for internal components • “Sight-Set” calibrated pressure adjustment displays a visible pressure scale, fully adjustable through the range without removing the cover (on NEMA 1 enclosure models) • Manual reset lockout option provides “tripfree” lockout that cannot be overridden or reset until pressure returns to specified level • Variety of available pressure connection styles allows greater flexibility when mounting control and adapting pressure connections to field application requirements Indoor Air Quality DESCRIPTION The P70, P72, and P170 controls for high pressure applications are designed primarily for high pressure cut-out control, head pressure control, and condenser fan cycling control on commercial refrigeration and air conditioning applications. Controls are available in several pressure ranges and are compatible with most common refrigerants. They may also be used on other non-corrosive fluid applications. Ammonia compatible models are also available. Several different electrical ratings and switch configurations are available. The P72 models provide direct control of 208-240 volt single phase motors up to 3 hp, and 208-220 volt 3-phase motors up to 5 hp. Thermostats P70, P72, and P170 Series Oils & Chemicals JOHNSON CONTROLS - Controls for High Pressure Applications Compressors, Chillers, Condensers Refrigeration SWITCH ACTION Range psig (kPa) P70AA-118C SPST Open-low 100 to 400 (690 to 2758) P70AA-2C SPST Open-low P72AA-27C DPST Open-low P170AA-118C SPST Open-low Differential psi (kPa) Max Overpressure Max Working Pressure 475 psig (3275 kPa) 400 psig (2758 kPa) 525 psig (3620 kPa) 150 psig (1034 kPa) 475 psig (3275 kPa) 400 psig (2758 kPa) 475 psig (3275 kPa) 400 psig (2758 kPa) Tools & Instruments Minimum 35 (241) Maximum 200 (1379) 0 to 150 Minimum 12 (83) Maximum 70 (482) 0 to 1034 Minimum 35 (241) Maximum 200 (1379) 100 to 400 (690 to 2758) Minimum 35 (241) Maximum 200 (1379) PRESSURE CONNECTION 36 in. Capillary with 1/4 in. Flare Nut 36 in. Capillary with 1/4 in. Flare Nut 36 in. Capillary with 1/4 in. Flare Nut 1/4 in. Male Flare Connector K-296 Refrigeration PART NO Accessories, Supplies & Commodities SELECTION CHART - Condenser Fan Cycling Controls (for Non-Corrosive Refrigerants) Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 19 Motors Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS - Controls for High Pressure Applications P70, P72, and P170 Series All Range Controls (for Non-Corrosive Refrigerants) PART NO PRESSURE CONNECTION P70CA-2(a) 1/4 in. Male Flare Connector P70CA-3(a) P70DA-1C(a) P70KA-1C Electrical P72CA-2(a) P72DA-1(a) P170CA-3C P170DA-1C Heating Components P170KA-1C SWITCH ACTION Minimum 60 (414) SPST Open-high Maximum 150 (1034) 36 in. Capillary with 1/4 in. Flare Nut Minimum 60 (414) SPST Open-high Maximum 150 (1034) 36 in. Capillary with 1/4 in. Flare Nut Manual Reset Lockout SPST Open-high 36 in. Capillary with 1/4 in. Flare Nut Manual Reset Lockout 4-wire, 2-circuit Line-M1 Close-high Line-M2 Open-high 36 in. Capillary with 1/4 in. Flare Nut Minimum 60 (414) DPST Open-high Maximum 150 (1034) 36 in. Capillary with 1/4 in. Flare Nut Manual Reset Lockout DPST Open-high SPST Open-high 50 to 500 (345 to 3448) Minimum 60 (414) Maximum 150 (1034) SPST Open-high 50 to 500 (345 to 3448) Manual Reset Lockout 4-wire, 2-circuit Line-M1 Close-high, 50 to 500 (345 to 3448) Line-M2 Open-high Manual Reset Lockout Range psig (kPa) Max Overpressure 500 psig (3448 kPa) 50 to 500 (345 to 3448) 525 psig (3620 kPa) 500 psig (3448 kPa) 50 to 500 (345 to 3448) 525 psig (3620 kPa) 500 psig (3448 kPa) 500 psig (3448 kPa) 50 to 500 (345 to 3448) 50 to 500 (345 to 3448) 525 psig (3620 kPa) 525 psig (3620 kPa) 500 psig (3448 kPa) 50 to 500 (345 to 3448) 525 psig (3620 kPa) 500 psig (3448 kPa) 1/4 in. Male Flare Connector 1/4 in. Male Flare Connector 1/4 in. Male Flare Connector 50 to 500 (345 to 3448) 500 psig (3448 kPa) 525 psig (3620 kPa) 525 psig (3620 kPa) 500 psig (3448 kPa) 525 psig (3620 kPa) 500 psig (3448 kPa) 525 psig (3620 kPa) Ammonia Compatible Models PART NO P70CA-5C(a) P70DA-2C(a) Differential psi (kPa) Max Working Pressure Range psig (kPa) SWITCH ACTION MaxOverrun Pressure Minimum 20 (138) Maximum 120 (827) Minimum 60 (414) Maximum 150 (1034) Lockout (requires manual reset) 300 psig (2068 kPa) 50 to 300 (345 to 2068) SPST Open Low 400 psig (2758 kPa) PRESSURE CONNECTION 1/4 in. SS Female NPT 300 psig (2068 kPa) 50 to 500 (345 to 3448) SPST Open-high 525 psig (3620 kPa) 1/4 in. SS Female NPT 300 psig (2068 kPa) 50 to 500 (345 to 3448) SPST Open-high 525 psig (3620 kPa) 1/4 in. SS Female NPT Accessories, Supplies & Commodities Oils & Chemicals Thermostats (a) UL Listed as Refrigeration Pressure Limiting Controls Tools & Instruments Refrigeration Max Working Pressure (a) UL Listed as Refrigeration Pressure Limiting Controls P70AA-119C Indoor Air Quality Differential psi (kPa) K-297 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 20 Refrigeration Compressors, Chillers, Condensers JOHNSON CONTROLS - CONTROLS FOR DUAl PRESSURE APPLICATIONS P70,P72,AND P170 SERIES MICRO-SET CONTROLS FOR NON-CORROSIVE REFRIGERANTS SELECTION CHART Motors The P70, P72, and P170 controls for dual pressure applications are designed primarily for use as combination high and low pressure controls on commercial refrigeration and air conditioning applications. 100 to 500 100 to 500 100 to 500 (690 to 3447) 100 to 500 (690 to 3447) 100 to 500 (690 to 3447) 100 to 500 (690 to 3447) PRESSURE CONNECTOR LIMITED KNOB ADJ Fixed at 65 (448) orLockout 36 in.Cap.With 1/4 in. Flare requires, manual reset Nut Lockout(Requires Manual Reset) 36 in.Cap.With 1/4 in. Flare Nut Fixed at 65 (448) orLockout 36 in.Cap.With 1/4 in. Flare requires, manual reset Nut Fixed Approx: 65 (448) 1/4 in.Male Flane Connector Lockout(Requires Manual Reset) 1/4 in.Male Flane Connector Fixed at 65(448) or Lockout 1/4 in.Male Flane (Requires Manual Reset) Connector LOW CUT OUT None None LOW CUT OUT None None ALL RANGE CONTROLS FOR NON-CORRISIVE REFRIGERANTS SELECTION CHART PART NO SWITCH ACTION P70LB-1 SPST P70MA-1 SPST P70NA-1 SPST P72LA-1 DPST P72LB-1 DPST P72MA-1 DPST P72NA-1 DPST P170LB-1 SPST P170MA-1 SPST P170NA-1 SPST P70MA-2 SPST LOW PRESSUREpsig (kPa) Range Diff 20 in. to 100 Min 6 (41) Max 50 (–68 to 690) (345) 20 in. to 100 Min 6 (41) Max 50 (–68 to 690) (345) 20 in. to 100 Fixed(Manual Reset) (–68 to 690) 20 in. to 100 Min 7 (48) Max 50 (–68 to 690) (345) 20 in. to 100 Min 7 (48) Max 50 (–68 to 690) (345) 20 in. to 100 Min 7 (48) Max 50 (–68 to 690) (345) 20 in. to 100 Fixed(Manual Reset) (–68 to 690) 20 in. to 100 Min 7 (48) Max 50 (–68 to 690) (345) 20 in. to 100 Min 7 (48) Max 50 (–68 to 690) (345) 20 in. to 100 Fixed(Manual Reset) (–68 to 690) 20 in. to 100 Min 7 (48) Max 50 (–68 to 690) (345) HIGH PRESSURE psig (kPa) Range Diff (Non-Adj) PRESSURE CONNECTOR LIMITED KNOB ADJ Fixed Approx: 65 (448) 100 to 500 (690 to 36 in. Cap. With 1/4 in. 3447) Flare Nut 100 to 500 (690 to Lockout (Requires Manual Reset) 36 in. Cap. With 1/4 in. 3447) Flare Nut 100 to 500 (690 to Lockout (Requires Manual Reset) 36 in. Cap. With 1/4 in. 3447) Flare Nut Fixed Approx: 65 (448) 100 to 500 (690 to 36 in. Cap. With 1/4 in. 3445) Flare Nut Fixed Approx: 65 (448) 100 to 500 (690 to 36 in. Cap. With 1/4 in. 3447) Flare Nut 100 to 500 (690 to Lockout (Requires Manual Reset) 36 in. Cap. With 1/4 in. 3447) Flare Nut 100 to 500 (690 to Lockout (Requires Manual Reset) 36 in. Cap. With 1/4 in. 3447) Flare Nut Fixed Approx: 65 (448) 100 to 500 (690 to 36 in. Cap. With 1/4 in. 3445) Flare Nut 100 to 500 (690 to Lockout (Requires Manual Reset) 36 in. Cap. With 1/4 in. 3447) Flare Nut 100 to 500 (690 to Lockout (Requires Manual Reset) 36 in. Cap. With 1/4 in. 3447) Flare Nut 100 to 500(690 to Lockout (3620 High) (Requires 1/4 in. Female NPT Conn. 3445) Manual Reset) LOW CUT OUT None None None LOW CUT OUT None None LOW CUT OUT None None None Tools & Instruments ALL RANGE AMMONIA COMPATABLE CONTROLS SELECTION CHART SELECTION CHART PART NO SWITCH ACTION P70LA-2 SPST LOW PRESSUREpsig (kPa) Range Diff 20 in. to 100 (–68 to 690) Min 7 (48) Max 50 (345) HIGH PRESSURE psig (kPa) Range Diff (Non-Adj) PRESSURE CONNECTOR LIMITED KNOB ADJ 100 to 500(690 to 65 psi < 300 psig 75 psi 300-400 1/4 in. Female NPT Conn. 3445) psig 95 psi > 400 psig K-298 Heating Components Min 5 (34) Max 35 (241) Min 5 (34) Max 35 (241) Min 5 (34) Max 35 (241) Min 5 (34) Max 35 (241) Min 5 (34) Max 35 (241) Min 5 (34) Max 35 (241) Indoor Air Quality 12 in. to 80 (–41 to 552) P70MA-18 SPST 12 in. to 80 (–41 to 552) P70SA-1 Two IndependentSPDT 12 in. to 80 (–41 to 552) P170LB-6 SPST 12 in. to 80 (–41 to 552) P170MA-18 SPST 12 in. to 80 (–41 to 552) P170SA-1 Two IndependentSPDT 12 in. to 80 (–41 to 552) Thermostats SPST HIGH PRESSURE psig (kPa) Range Diff (Non-Adj) Oils & Chemicals P70LB-6 LOW PRESSURE psig (kPa) Range Diff Accessories, Supplies & Commodities SWITCH ACTION None Refrigeration PART NO Electrical SELECTION CHART Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 21 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS - Electronic Pressure Control with Display P470 Selection Chart DESCRIPTION The P470 Electronic Pressure Control with Display is a single-stage, On/Off, electronic pressure control with an SPDT (Single-Pole Double-Throw) output relay. The control may be field set to operate in one of three pressure ranges (0 to 100 psi, 0 to 500 psi, or 50 to 750 psi), as either an open-high or open-low control. The P470 control features a large LCD that displays the sensed pressure and other system-status indicators, as well as the adjustable set points in the programming mode. The P470 control has a lockable, 3-button touchpad for adjusting set points, and a front-panel LED (Light-Emitting Diode) that indicates the output relay status. The P470 control uses a P399 Electronic Pressure Transducer to generate a pressure signal and WHA-P399 Wiring Harness, which eliminates many of the constraints of capillary tube control applications. FEATURES • Easy-to-read liquid crystal display (LCD) clearly displays the sensed pressure (and other control information), and in many situations pressure may be monitored without applying gauges to the controlled equipment. • Three field-selectable pressure ranges between 0-750 psi provide the flexibility to cover most HVAC/R pressure applications. • 24 VAC, and 120 or 208/2 4 0VAC models increase application options, with two controls that cover most common voltages. • Lockable, 3-button, front-panel touchpad deters tampering and over adjustment of control settings by unauthorized personnel. • Built-in, adjustable, anti-short cycle time-delay reduces compressor short cycling and nuisance lockouts, which can extend compressor life. • Economical, versatile transducer & wiring harness eliminate many constraints of capillary control applications & allow up to a 100ft (30.5m) cable between control & transducer SELECTION CHART PART NO DESCRIPTION P470FB-1C Low Voltage (<30 VAC) Electronic Pressure Control with Display Supply Voltage: 24 VAC Class 2 Transformer Line Voltage Electronic Pressure Control with Display Supply Voltage:120 or 208/240 VAC P470EB-1C Note: P470 controls do not include a transducer or wiring harness. Transducer and wiring harness must be purchased separately. P399 transducer must be matched to the selected pressure range. ACCESSORIES PART NO P399AAA-1C P399AAC-1C DESCRIPTION 0 to 100 psi Pressure Transducer with 1/8 in. NPT Male Fitting 0 to 100 psi Pressure Transducer with 1/4 in. SAE (Schrader) Female Fitting with integral valve depressor P399BAA-1C 0 to 500 psi Pressure Transducer with 1/8 in. NPT Male Fitting P399BAC-1C 0 to 500 psi Pressure Transducer with 1/4 in. SAE (Schrader) Female Fitting with integral valve depressor P399CAA-1C 0 to 750 psi Pressure Transducer with 1/8 in. NPT Male Fitting P399CAC-1C WHA-P399-200C WHA-P399-400C 0 to 750 psi Pressure Transducer with 1/4 in. SAE (Schrader) Female Fitting with integral valve depressor 6 ft 6-1/2 in. (2m) 3-Wire Cable with Plug-in Connector for P399 Transducer 13 ft 3 in. (4m) 3-Wire Cable with Plug-in Connector for P399 Transducer K-299 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 22 P28GA-2C P28NA-5C 90 sec 60 sec 120 sec 45 sec 90 sec 90 sec with Runlight and Alarm Terminals 90 sec 120 sec TIME DELAY HEATERCIRCUIT VAC 120/240 120/240 120/240 120/240 120/240 120/240 TYPE OF RESET REFRIGERANT ® PRESSURE CONNECTION Manual Manual Manual Manual Manual Manual Non-Corrosive** Non-Corrosive** Non-Corrosive** Non-Corrosive** Ammonia Non-Corrosive** 36 in. Cap. With 1/4 in.Flare Nut 36 in. Cap. With 1/4 in.Flare Nut 36 in. Cap. With 1/4 in.Flare Nut 36 in. Cap. With 1/4 in.Flare Nut 1/4 in. Female NPT 36 in. Cap. With 1/4 in.Flare Nut 120/240 24 VAC or VDC Automatic Manual Non-Corrosive** Non-Corrosive** 36 in. Cap. With 1/4 in.Flare Nut 36 in. Cap. With 1/4 in.Flare Nut Motors Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals *Switch differential approximately 5 psi (34 kPa). Time Delay relay energizes @ 9 psi (61 kPa) pressure difference, de-energized @ 14psi (97 kPa) difference. †Replaces Ranco P30-3701. ** Non-corrosive refrigerants include R-12, R-22, R-134a, R-500, R-502(R). ††Replaces Ranco P30-3601. *** Replaces Ranco P30-3801. • Universal Replacement. K-300 Refrigeration P28AA-1C† P28AA-2C†† P28AA-17C*** P28AA-18C P28NA-1C P28DA-1C TIME DELAY Electrical SELECTION CHART PART NO Heating Components DESCRIPTION The P28 series provides dependable shutdown on pressure of lubricated refrigeration compre by sensing low lube oil pressure. A built-in time Delay switch, accurately compensated for am temperature, allows for pressure pick up on start and avoids nuisance shutdowns on pressure of short duration during the running cycle. APPLICATIONS • Semi-hermetic compressors • The P28 control measures pressure available to circulate oil through the lubrication system (Net oil pressure is the difference between oil gauge and crankcase pressure.) SPECIFICATIONS • Maximum bellows pressure is 180 psig (2241 kPa) Indoor Air Quality SELECTION CHART Thermostats JOHNSON CONTROLS - P28 SERIES LUBE OIL PRESSURE CUTOUT CONTROL (With Time Delay) Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 23 JOHNSON CONTROLS - 32 SERIES SENSITIVE PRESSURE SWITCH SELECTION CHART DESCRIPTION This differential pressure switch is used to sense airflow in ducts. APPLICATIONS • Airflow proving with electric duct heaters, humidifiers, and other equipment. • Maximum airflow control for variable volume systems • Reheat duct powered systems • Clogged filter detection • Detection of icing of air conditioning coils and initiation of defrost cycle Electrical Motors Compressors, Chillers, Condensers Refrigeration SELECTION CHART PART NO P32AC-2† –40°F (–40° C) min.; 167°F (75° C) max. P32AF-1 –40°F (–40° C) min.; 167°F (75° C) max. P32AF-2† –40°F (–40° C) min.; 167°F (75° C) max. PRESSURE CONNECTOR MAXIMUM CONTACT RANGE in WC SENSITIVITY AT SET POINT OVERPRESSURE ACTION (kPa) MIN SET POINT in psig (kPa) WC (kPa) High Pressure 1 (6.895) SPDT 0.15 to 12(0.037 to 0.07 (0.017) Adjustable connectors are metal 2.99) 1/8 in. female NPT inside, 1/2 in. NPSM outside for mounting.;Low Pressure connectors are molded, 1/8 in.female NPT 1 (6.895) SPDT 0.04 (0.01) Adjustable High Pressure 0.05 to 5 (0.012 to connectors are metal 1.24) 1/8 in. female NPT inside, 1/2 in. NPSM outside for mounting.;Low Pressure connectors are molded, 1/8 in.female NPT Low Pressure 1 (6.895) SPDT 0.05 to 5 (0.012 to 0.025 (0.006) Adjustable connectors are 1.24) molded ,1/8 in.female NPT Low Pressure 1 (6.895) SPDT 0.05 to 5 (0.012 to 0.025 (0.006) Adjustable connectors are 1.24) molded ,1/8 in.female NPT Supplied with 1/4 in. compressor fitting, 4 in. extension tube, two mounting screws, and ‘O’ gasket (angle bared fitting insulated) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components P32AC-1 AMBIENT TEMPERATURE Min/Max –40°F (–40° C) min.; 167°F (75° C) max. K-301 SCALE PLATE Yes MOUNTING BRACKET INCLUDED BKT182R Yes BKT229-1R Yes BKT182-1R Yes BKT229-1R Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 24 TYPE OF RESET PRESSURE CONNECTION HEATER CIRCUIT VAC 120 sec Manual 120/240 P145NCA-12C(d) P145NCB-12C(e) 9(62)(c) 9(62)(c) 120 sec 120 sec Manual Manual 36 in. Cap. With 1/4 in. Flare Nut style 5 style 5 MAXIMUM ALLOWABLE PRESSURE, psig (kPa) 425(2360) 120/240 120/240 425(2360) 425(2360) FACTORY SET OPENING POINT TIME DELAY(a) TYPE OF RESET PRESSURE CONNECTION HEATER CIRCUIT VAC (g) P45NCA-82C(f) 6.5(45)(g) 45 Manual 120/240 P145NCA-82C(h) 6.5(45)(g) 45 Manual 36 in. Cap. With 1/4 in. Flare Nut style 5 MAXIMUM ALLOWABLE PRESSURE, psig (kPa) 425(2360) 120/240 425(2360) P145NCB-82C(I) 6.5(45)(g) 45 Manual style 5 120/240 425(2360) Carlyle compressors PART NO (a) Relay is not field replaceable (b) Replaces Ranco P30-5826 (c) Switch differential is approximately 5 psi (34kpa). Time relay energizes at: 9 psi (61 kpa) pressure difference, de-energizes at 14 psi (97kpa) difference (d) Replaces Ranco P30-5827 (e) Replaces Ranco P30-5827 (includes alarm wire) (f) Replaces Carlyle/Carrier part no. HKA-600, 6342060 (g) Switch differential is approximately 4.5 psi (34kpa). Time delay relay energizes at: 6.5 psi (45kpa) pressure difference de-energizes at: 11 psi (76kpa) difference (h) Replaces Carlyle/ Carrier paer no. HKA-600.6342060 36” SEC99A UltraCap (i) Replaces Carlyle/ Carrier paer no. HKA-600.6342060 36” SEC99A UltraCap (includes alarm wire) K-302 Motors Electrical Heating Components Indoor Air Quality TIME DELAY(a) P45NCA-12C(b) FACTORY SET OPENING POINT psig (kpa) 9(62)(c) Thermostats SELECTION CHART PART NO Oils & Chemicals DESCRIPTION The P45 control provides dependable, low lube oil pressure protection for refrigeration compressors. The factory set pressure setting provides operation to the compressor manufacturer’s specification. A built in time delay relay, compensated for ambient temperature, allows for pressure pick-up on short duration pressure losses during the running cycle. SPECIFICATIONS • For all non-corrosive refrigerants. FEATURES • Universal mounting. • Trip-free manual reset • Ambient compensated time delay ACCESSORIES These controls are supplied without mounting brackets but are required, order kit number BKT38A600R, which contains (5) 271-51 angle mounting brackets with screws. APPLICATIONS • Semi-hermetic compressors. • The P45 control measures pressure available to circulate oil through the lubrication system. (net oil pressure is the difference between oil pump pressure and the crank case pressure). Accessories, Supplies & Commodities Copeland compressors Tools & Instruments LUBE OIL PRESSURE CUTOUT CONTROL ( With Time Delay) Refrigeration JOHNSON CONTROLS - P45 SERIES Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 25 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS P74 Series Differential Pressure Control Description Series P74 measures the pressure difference between two sources: supply lines and return lines. A change in differential pressure will reposition the switching mechanism to cause corrective action of the supplementary control equipment. Features • field-proven Penn switch with a completely enclosed contact mechanism • pressure differential setting is easily changed without removing the cover Applications • differential pressure sensing on chillers or water-cooled condensers • lube oil failure cutout for refrigeration compressors (same as the P28, but does not incorporate time delay) • positioning M100 Series motor-actuated valves (P74JA-2) • to prove pump operation Accessories All models on this page include a universal mounting bracket. Selection Chart Code Number P74EA-8 Switch Action Range Pressure Differential Switch Pressure psi (kPa) 1 Differential Connections FOR ALL NON-CORROSIVE LIQUIDS P74AA-1C SPST Closes On Decreases in Pressure Difference 8 to 30 36 in. Cap. with 8 to 70 Adjustable (55 to 483) Adjustable 1/4 in. Flare Nut P74BA-1C SPST Opens On Decrease in Pressure Difference 36 in. Cap. with P74EA-8C 2 to 26 Adjustable 1/4 in. Flare Nut 3.5 Fixed (14 to 207) P74EA1/4 in. Male 10C Flare SPDT (Snap-Acting) P74FA-1C 8 to 60 Adjustable (55 to 414) P74FA-5C 1/4 in. FNPT 1.5 Fixed 2 to 26 Adjustable 36 in. Cap. with P74FA-10C (14 to 207) 1/4 in. Flare Nut 8 to 60 Adjustable 1/4 in. Male P74JA-2C SPDT (Floating) 2.5 Fixed (55 to 414) Flare 1. Maximum continuous pressure to low pressure bellows - 180 psig (1241 kPa) Technical Specifications Electrical Ratings Motor Ratings AC Full Load Amp AC Locked Rotor Amp AC Non-Inductive Amp Pilot Duty AC Full Load Amp AC Locked Rotor Amp AC Non-Inductive Amp Pilot Duty AC Full Load Amp AC Locked Rotor Amp AC Non-Inductive Amp Pilot Duty 120 V 208 V 240 V 277 V P74AA, P74BA - 1 Phase 20.0 18.7 17.0 — 120.0 112.2 102.0 — 22.0 22.0 22.0 — 125 VA, 120 to 600 VAC; 57.5 VA, 120 to 300 VDC P74EA 16.0 9.2 8.0 — 96.0 55.2 48.0 — 16.0 16.0 16.0 16.0 125 VA, 120 to 600 VAC P74FA 6.0 3.4 3.0 — 36.0 20.4 18.0 — 10.0 10.0 10.0 10.0 125 VA, 120 to 277 VAC P74JA 1 Amp; 24 VAC Class 2; 50/60 Hz K-303 Bellows Material Stainless Steel Brass Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 26 SELECTION CHART REFRIGERANT P128AA-1C(a) 8 to 70 (55 to 483) -- 90 sec Manual Non-Corrosive P128AA-2C(b) 8 to 70 (55 to 483) -- 60 sec Manual Non-Corrosive P128AA-17C(c) 8 to 70 (55 to 483) -- 120 sec Manual Non-Corrosive P145NCA-12C(d) Factory Set 9 (62) Factory Set 9 (62) 120 sec Manual Non-Corrosive P145NCA-82C(e) -- 45 sec Manual Non-Corrosive P145NCB-12C(f) -- Factory Set 6.5 (45) Factory Set 9 (62) 120 sec Manual Non-Corrosive P145NCB-82C(g) -- 45 sec Manual Non-Corrosive Factory Set 6.5 (45) HEATER CIRCUIT VAC 120/240 120/240 120/240 120/240 120/240 120/240 120/240 Tools & Instruments (a) Replacement for P28AA-1-. Replaces Ranco P30-3701. (b) Replacement for P28AA-2-. Replaces Ranco P30-3601. (c) Replacement for P28AA-17-. Replaces Ranco P30-3801. (d) Replacement for P45NCA-12-. (Copeland Model). Replaces Ranco P30-5826. (e) Replacement for P45NCA-82-. (f) Copeland model with alarm circuit. (g) Carlyle model alarm circuit. NOTE: SEC99 UltraCap hose must be ordered separately. PRESSURE CONNECTION 1/4 in. Male Flared Conn. 1/4 in. Male Flared Conn. 1/4 in. Male Flared Conn. 1/4 in. Male Flared Conn. 1/4 in. Male Flared Conn. 1/4 in. Male Flared Conn. 1/4 in. Male Flared Conn. Thermostats TYPE OF RESET Oils & Chemicals TIME DELAY Accessories, Supplies & Commodities Range PSI (ICPA) Adjustable Non-Adjustable K-304 Refrigeration PART NO Indoor Air Quality Heating Components DESCRIPTION The P128 and P145 Series controls provide dependable low pressure lube oil cut-out for pressure lubricated refrigeration compressors. The P128 Series offer adjustable range settings. The P128 and P145 controls feature a 1/4-in. male flare pressure connection which may be used with a refrigerant hose or cap tube such as SEC99 Ultra Cap. FEATURES • Ambient compensated time delay relay • Trip-free manual reset • Industry standard • P128 is fully adjustable throughout its range • P145 is factory set to compressor manufacturer’s specifications APPLICATIONS Lube oil cutout on hermetic and semi-hermetic compressors used in commercial air conditioning and commercial and industrial refrigeration systems. Motors SELECTION CHART Electrical JOHNSON CONTROLS - P128 AND P145 SERIES LUBE OIL PRESSURE CONTROLS Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 27 JOHNSON CONTROLS - P12 SERIES DIFFERENTIAL PRESSURE CONTROLS SELECTION CHART DESCRIPTION The P12 Series Differential Pressure Controls are suitable for use with oil and/or noncorrosive refrigerants. The switch is actuated by a difference in pressure between the two sensing elements. The control is factory-set to open the switch (COM to 1) at a differential pressure of 18 psi (124 kPa) and close the switch (COM to 1) at a differential pressure of 12 psig (82 kPa). The control is not field-adjustable. This control may be connected to a P28 oil failure cutout control, with time delay, to give complete monitoring of lubrication on two refrigeration compressors driven by one motor. Motors Compressors, Chillers, Condensers Refrigeration PART NO P12AA-3C DIFFERENTIAL PRESSURE COM to 1 Opens Closes 18 psi (124 kPa) 12 psi (821 kPa) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical SELECTION CHART K-305 MAXIMUM ALLOWABLE PRESSURE, psig (kPa) 425 (2390) Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 28 FEATURES • Single-pole double-throw (SPDT) relay contacts for liquid line solenoid and alarm application – allows liquid line solenoid to be closed if the P545 control shuts off the compressor due to low oil pressure; provides alarm indication, including circuits that use neon lights. • Relay contact output for compressor - provides reliable, long-lasting operation. • Build in test circuit - verifies proper control operation quickly, without additional tools or equipment. • Improved noise immunity - exceeds immunity requirements of UL 991 for radiated Radio Frequency (RF) and (IEC) 6100-4-6 for RF-induced conducted disturbances. • Selection of anti-short cycle time delay - allows choice of anti-short cycle strategy for a wide range of equipment. Requirements; possible elimination of external short-cycle timer. • User-friendly display panel-display the status of the compressor lubrication system continuously. • Backwards compatibility - allows easy replacement of existing electronic lube oil control. SELECTION CHART Product PART NO Fit Compressors Manufactured by Lube oil delay (second) P400switch Wiring Harness 120 90 120 P400AD-2 P400BD-1 P400AD-1 WHA-P400-100 WHA-P400-125 WHA-P400-100 P545NCB-22C1 copeland(R) P545NCB-25C1 Bitzer P545NCB-82C1 Carlyle(R) 1. Switch and wiring harness included Motors The P545 series electronic lube oil control is designed for refrigeration compressors equipped with an oil pump that accepts a single point differential pressure switch. The P400 switch continuously monitors net lube oil pressure and the P545 control locks out the compressor if lube oil pressure falls below the manufacturer’s recommended net pressure for longer than the recommended lube oil time delay. Front-mount Light-Emitting diodes (LEDs) indicate the status of lubrication system, and can be set to minimize compressor short cycling. A Johnson Controls/PENN(R) R310AD current sensing switch, sold separately, may be used to disable the P545 control lockout circuit during abnormal compressor shutdowns. Electrical DESCRIPTION Heating Components P545 SERIES ELECTRONIC LUBE OIL CONTROL Indoor Air Quality JOHNSON CONTROLS Compressors, Chillers, Condensers Refrigeration Test switch 6-8 second delay P545 control and P400 sensor WHA-300-XXX only Immediate WHA-300-XXX only or WHA-400-XXX Immediate 1. WHA-P300-XXX is the 3-wire harness supplied with the P345 or P445 control and the P300 sensor. WHA-P400-XXX is the line 2-wire harness supplied with the P545 control and the P400 switch. 2. When the P445 control is wired to a P400 switch, the test button may operate when powered up; however, after a couple minutes of operation, the test switch function no longer works. All other control functions operate normally. Accessories PART NO Open point(differential pressure) P400AD-1C 7.0 ± 1.0 Psid P400AD-2C 12.75 ± 0.75 Psid P400BD-1C 10.0 ± 1.5 Psid 1. W iring harness included. Close point(Differential above open point) Threads Wiring Harness less than or equal to 2.0 Psid less than or equal to 1.5 Psid less than or equal to3.0 Psid 3/4-16UNF 3/4-16UNF M20x1.5 WHA-P400-100 WHA-P400-100 WHA-P400-125 P545 SERIES ELECTRONIC LUBE OIL CONTROL(continued) wiring harness and other accessories Product PART NO DESCRIPTION KITP545-82C* WHA-P400-100C WHA-P400-125C WHA-P400-250C WHA-P400-430C CST29A-600C sensor block; P545NCB-82 control;P400AD-1C switch WHA-P400-100C wiring harness 3-1/3 ft(1m)length wiring harness 4 ft(1-1/4m)length wiring harness 8 ft(2-1/2m)length wiring harness 14 ft(4-1/3m)length wiring harness K-306 Oils & Chemicals WHA-300-XXX only P545 control and P300 sensor Accessories, Supplies & Commodities Wiring Harness1 P345 or P445 control with P300 sensor WHA-300-XXX only or WHA-400-XXX Does not function2 Tools & Instruments P345 or P445 control with P300 sensor Refrigeration Test Thermostats Control and Sensor/switch Compatibility Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 29 JOHNSON CONTROLS CST29A Adapter Block for Carlyle® Compressors Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Description The Johnson Controls/PENN® CST29A Adapter Block is designed for use on Carlyle® compressors (models O6CC, O6D, and O6E) equipped with an oil pump. The adapter block allows for the installation of the P400 single point differential pressure switch for use with the P545NCB-82 electronic lube oil control. Features • simple installation - provides easy conversion of electromechanical lube oil control system to electronic equivalent • designed specifically for Carlyle applications - applies to Carlyle compressor models O6CC, O6D, and O6E Selection Chart Part Number CST29A-600C Description Adapter Block for Carlyle Compressor Series O6CC, O6D, and O6E; Includes Allen-head bolts. Accessories Part Number P545NCB-82C P400AD-1C KITP545-82C WHA-P400-100C WHA-P400-125C WHA-P400-250C WHA-P400-400C Description Electronic Lube Oil Pressure Control, 120 Second Delay Before Lockout, with P400AD-1 switch and WHA-P400-100 switch cable Replacement Differential Pressure Switch with WHA-P400-100 Wire Harness Open at 7 ±1.0 psid, Close Less than or Equal to 2.0 psi above Open Point Single Pack P545 with Adapter Block and Allen-head Bolts 3 1/3 ft (1 m) Length Wiring Harness 4 ft (1 1/4 m) Length Wiring Harness 8 ft (2 1/2 m) Length Wiring Harness 14 ft (4 1/3 m) Length Wiring Harness Carlyle Supplied Parts 06DA680063 Adapter Block Gasket for Carlyle Compressor Series O6CC, O6D, and O6E Note: . Order 06DA680063 from a Carlyle distributor. For information on the nearest Carlyle distributor, visit www.carlylecompressor.com. K-307 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 30 Refrigeration Compressors, Chillers, Condensers JOHNSON CONTROLS P100 Series Encapsulated Pressure Switches Motors Applications • low limit, high limit, and fan cycling control in commercial refrigeration • ice machines • food service equipment Replaces: Gemline – – – – – – – – PC151 PC100 – PC103 – – – – Ranco MPL-7011 MPF-7004 – MPF-7008 – – MPL-7001 MPL-7002 MPH-7107 MPH-7108 – – – – – – Robertshaw 3100-050 3100-004 – – – – – – 3100-151 3100-100 3100-112 3100-103 3100-106 – – – Saginomiya – – – ABC-AA01 – – – – – – – – – – – – Accessories, Supplies & Commodities Setting – psig (kPa) Opens Closes 10 (69) 32 (221) 35 (241) 60 (414) 25 (172) 80 (52) 150 (1034) 225 (1551) 170 (1172) 250 (1724) 300 (2068) 400 (2758) 5 (34) 20 (138) 15 (103) 30 (207) 400 (2758) 300 (2068) 425 (2930) 325 (2241) 275 (1896) 175 (1207) 410 (2827) 475 (3275) Lockout 350 (2413) Manual Reset 630 (4344) 375 (2586) Tools & Instruments Part Switch Application Numbe Action P100AP-201C Low Cutout P100AP-2C 1 P100AP-9C Open On P100AP-3C Pressure Fan Cycling P100AP-4C Drop 2 P100AP-332C 3 P100AC-1C Low Cutout 3 P100AC-2C P100CP-1C High Cutout P100CP-2C 3 P100CC-9C Open On P100DA-1C Pressure P100DA-2C Rise High Limit P100DA-35C 2 P100DA-81C 4 P100DC-3C 1. 18 in. wire leads 2. Commpatible with R410A refrigerant 3. Includes conduit clamp (shown above) 4. In conduit box Indoor Air Quality Selection Chart Thermostats • electrical connections are made to 48 in. Heating Components P100 Oils & Chemicals Features 120 240 Ratings • compact size and light weight allow VAC VAC for direct mounting AC Full Load Amps (FLA) 5.8 2.9 • trip-free manual reset (manual reset AC Locked Rotor Amps (LRA) 34.8 15.0 models)...contacts cannot be overridden Pilot Duty – 375 VA at 120/240/277 VAC; 2 amps at 28 VAC/VDC by continued depression of the reset button • use with all non-corrosive refrigerants • 1/4 in. female flare fitting with built-in • encapsulated switch, dust tight Schrader type depressor is standard Electrical Technical Specifications Electrical Ratings K-308 Refrigeration Description P100 Series switches are encapsulated, nonadjustable, SPST, direct mount switches for use with noncorrosive refrigerants. The switches are available with automatic reset in both open low and open high configurations and manual reset with open high action. Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 31 Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS P399 Electronic Pressure Transducer Description Pressure connections are available in one of The P399 Series Electronic Pressure Transducer is a compact, economical, rugged, direct-mount pressure transducer designed to produce a low voltage analog signal two standard styles: • 1/4 in. SAE female flare fitting (with Schrader valve depressor) • 1/8 in. NPT male fitting (0.5 to 4.5 VDC nominal ) based on the The wiring harness is purchased separately or sensed pressure. They are designed for use in commercial refrigeration and airconditioning applications. included with the P399xxx-1-200C. The P399 Transducer features welded stainless steel construction with environmentally sealed electronics. They are resistant to the effects of wide temperature swings, high humidity, condensation, and icing. They are suitable for use with all noncorrosive refrigerants as well as ammonia. • affordable • rugged stainless steel construction P399 Transducers are available in several pressure ranges (up to 750 psis), covering most common refrigeration and air conditioning applications. • environmentally sealed electronics Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments P399 Series Electronic Pressure Transducers provides a durable assembly and eliminates potential refrigerant loss due to O-ring failures - resists Electromagnetic • reliable, repeatable performance and long operating life minimizes service and replacement costs Interference (EMI) and damage due to • available in several pressure ranges (up to shock, vibration, and pressure pulsations 750 psis) to provide a single line of transducers for all refrigeration and air conditioning application needs withstand the effects of adverse conditions found in typical equipment rooms Selection Chart Accessories Part Number Description Part Number Description P399AAA-1C Pressure Transducer, 0-100 psis, 1/8 in. NPTM pressure WHA-P399-200C Wire Harness, 6 1/2 ft (2.0 m.) length with pigtails connection WHA-P399-400C Wire Harness, 13 ft (4.0 m.) length with pigtails Pressure Transducer, 0-100 psis, 1/4 in. SAE female flare pressure connection with valve depressor WHA-P399-600C Wire Harness, 19-5/8 ft (6.0 m.) length with pigtails P399AAC-1C P399BAA-1C Pressure Transducer, 0-500 psis, 1/8 in. NPTM pressure Note: Wiring harness must be ordered separately. connection P399BAC-1C Pressure Transducer, 0-500 psis, 1/4 in. SAE female flare Technical Specifications pressure connection with valve depressor Pressure Transducer, 0-750 psis, 1/8 in. NPTM pressure P399CAA-1C Refrigeration Features P399CAC-1C P399GAA-1C 1 P399 Electronic Pressure Transducer connection Overpressure 3x upper range limit, short term Pressure Transducer, 0-750 psis, 1/4 in. SAE female flare pressure connection with valve depressor Burst Pressure Vacuum 5x upper range limit 30 microns max (0.03 mm Hg) short term Pressure Transducer, 0-200 psis, 1/8 in. NPTM pressure Media Compatibility Noncorrosive refrigerants, refrigeration Supply Voltage lubricating oils, ammonia 5.00 ± 0.25 VDC ratiometric range, 6.0 VDC maximum connection P399AAA-1-200C Pressure Transducer, 0-100 psis, 1/8 in. NPTM pressure connection, with 6-1/2 ft (2m) wire harness with pigtails P399AAC-1-200C Pressure Transducer, 0-100 psis, 1/4 in. SAE female flare pressure connection with valve depressor, with 6-1/2 ft (2m) wire harness with pigtails P399BAA-1-200C Pressure Transducer, 0-500 psis, 1/8 in. NPTM pressure connection, with 6-1/2 ft (2m) wire harness with pigtails P399BAC-1-200C Pressure Transducer, 0-500 psis, 1/4 in. SAE female flare pressure connection with valve depressor, with 6-1/2 ft (2m) wire harness with pigtails P399CAA-1-200C P399CAC-1-200C Current Draw 5 mA maximum @ 5.0 VDC Output Signal Ratiometric, 10% to 90% of supply voltage Pressure Connections 1/8 in. NPT male, direct mount (0.5 to 4.5 VDC nominal) 1/4 in. SAE female flare with Schrader valve depressor, direct mount Temperature Storage and Humidity o Pressure Transducer, 0-750 psis, 1/8 in. NPTM pressure Ambient connection, with 6-1/2 ft (2m) wire harness with pigtails Refrigerant Pressure Transducer, 0-750 psis, 1/4 in. SAE female flare pressure connection with valve depressor, with 6-1/2 ft (2m) wire harness with pigtails Materials Vibration K-309 o o -40 to 158 F (-40 to 70 C) o o Connector -40 to 300 F (-40 to 149 C); 0 to 100% RH o o ±1.5% Span, -4 to 212 oF (-20 to 70 C); o ±2.0% Span, -40 to -4 F (-40 to -20 C) Nylon, 30% glass filled Main Body Stainless steel all welded construction Accuracy 1. Not applicable to System 350™ Pressure Controls o -40 to 257 F (-40 to 125 C) (304L) 10G, 20-2000 Hz maximum Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 32 JOHNSON CONTROLS - Current Sensing Switch DESCRIPTION The R310A Series Current Sensing Switch detects alternating current (AC) flow in a single circuit without being connected to that circuit. It may be used in any application where current detection is required. The R310A replaces the R10A used with Johnson controls/PENN time delay oil failure cutout controls such as the P28, P45, and P445. These applications incorporate internal line breaking overload protection, where lockout due to overload cycling is unacceptable or undesirable. The R310A switch is not intended to detect breakage of belts. The R310A is molded in a high dielectric material, which permits mounting inside a starter or contactor. FEATURES R310AD-1C R310AE-2C DESCRIPTION Current Sensing Switch Voltage Switching Capacity: 0-30 VAC Used With: P445 Electronic Lube Oil Control Current Sensing Switch Voltage Switching Capacity: 120-240 VAC Used With: P28 and P45 Electromechanical Lube Oil Controls SPECIFICATIONS R310A Series Current Sensing Switch SPST, Normally Open R310AD-1C 0.5-200 Amperes R310AE-2C 0.75-200 Amperes R310AD-1C 0.5 Amperes Switch Threshold R310AE-2C 0.75 Amperes Sensor Supply Voltage Induced from Monitored Conductor, Isolation 600 VAC RMS Switching Capacity (General R310AD-1C 0.1A @ 30 VAC/DC Purpose) R310AE-2C 0.5 @ 250 VAC/DC Output Polarity Non-polarity Sensitive Output Enclosure NEMA 1 Ambient Operating Conditions 5 to 140°F (-15 to 60°C); 0-95% RH, Non-condensing -40 to 158°F (-40 to 70°C); Ambient Storage Conditions 0-95% RH 2.34 x 1.85 x 0.875 in. Dimensions (H x W x D) (59 x 46 x 22 mm) Sensor Hole Size 0.70in. (17 mm) Diameter UL Guide NRNT Agency Listings cul Guide NRNT7 Switch Action Current Sensing Range K-310 Indoor Air Quality Thermostats Oils & Chemicals PART NO Accessories, Supplies & Commodities Selection Chart Tools & Instruments The R310A current sensing switch is designed to sense alternating current in a conductor that passes through its opening. The R310A Sensor closes an electronic switch if the alternating current in the conductor exceeds 0.5 amperes. Thus, the R310A switch may be used for several purposes: • Switch a pilot circuit • Energize a "run" signal on a device such as a fan, motor, or pump • Monitor motors and electrical loads for proper operation • Monitor on/off status of process motors. The R310A series current sensing switch is available in two models. The R310AD-1 switch is used in lowvoltage applications, such as with the P445 Electronic Lube Oil Control. The R310AE-2 switch is used in high-voltage applications, such as with the P28 and P45 Electromechanical Lube Oil Controls. The R310A switch avoids nuisance lockouts by sensing the lack of current flow to the motor. Regardless of the reason for motor shutdown, the lube oil control time delay circuit is de-energized when the current flow in the moto supply line drops below 0.5 amperes. In a typical application, the lube oil control does not lock out when the control circuit shuts off the compressor. However, if the compressor overheats and the internal thermal overload circuits open, the compressor shuts itself down, which causes the oil pressure to drop. This drop in oil pressure will energize the lube oil control heater (P28, P45) or timer (P445), causing a nuisance lockout. In this situation, the R310 switch senses the lack of current to the motor, and is used to deenergize the time delay heater (P28, P45) or electronic timer (P445) before a nuisance lockout occurs. Refrigeration APPLICATIONS Heating Components Electrical • Small size allows mounting in small enclosure • Solid-state switching contains no moving parts to fail • Low 0.5 ampere activation allows monitoring of most small equipment circuit loads • High 200 ampere monitoring capacity allows monitoring of heavy duty equipment • Large 0.70 in. (18 mm) diameter sensor hole accepts large diameter wire sizes and multiple coilings of smaller diameter wire sizes Motors JOHNSON CONTROLS Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 33 JOHNSON CONTROLS - UltraCap Armored Capillary Schrader Depressor in One End DESCRIPTION The SEC99A UltraCap Armored Capillary is designed for use as a pressure connection in refrigeration and A/C applications. This small orifice capillary minimizes pressure pulsation, and the brass armor sleeve improves resistance to abrasion caused by vibration. The copper capillary inside the armored sleeve allows no effusion of refrigerant to the environment. UltraCap is designed for use with 1/4 in. SAE male flare fitting connectors, such as those found on the Johnson Controls/PENN lines of pressure-actuated controls. Integral Schrader valve depressors are available. UltraCap Armored Capillary is compatible with all common noncorrosive refrigerants. The UltraCap capillary is available in a variety of lengths, and in models with two straight fittings or with one straight fitting and one 90° elbow fitting. Schrader Depressor in One End PART NO DESCRIPTION SEC99AA-24C SEC99AA-36C SEC99AA-48C SEC99AA-60C Two straight fittings Length: 24 in. (610 mm) Two straight fittings Length: 36 in. (914 mm) Two straight fittings Length: 48 in. (1219 mm) Two straight fittings Length: 60 in. (1524 mm) Schrader Depressor in Both Ends PART NO DESCRIPTION SEC99AB-24C SEC99AB-36C SEC99AB-48C SEC99AB-60C Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration One straight and one 90° fitting Length: 24 in. (610 mm) One straight and one 90° fitting Length: 36 in. (914 mm) One straight and one 90° fitting Length: 48 in. (1219 mm) One straight and one 90° fitting Length: 60 in. (1524 mm) SPECIFICATIONS Capillary Diameters SEC99A UltraCap Armored Capillary Inside: 0.062 in. (1.5 mm); Outside: 0.125 in. (3 mm) Thermostats Temperature Range Burst Pressure Maximum Working Pressure Suggested Torque to Seal 8 to 10 Oils & Chemicals Fittings: Straight 90° Elbow Material Agency Listings -50 to 350°F (-46 to 177°C) 3000 psig (20685 kPa) 600 psig (4137 kPa) Lb/ft (10.9 to 13.6 N.m) 1/4 in. Female Flare Connector with Schrader Depressor 1/4 in. Female Flare Connector with Schrader Depressor Forged Brass Nut with Copper Stem UL Recognized: File SA9457, CCN SFCS2 UL Recognized for Canada: SA9457, CCN SFCS8 Description The 271-51 is the universal mounting bracket used with many Johnson Controls/PENN products. PART NO DESCRIPTION 271-51 BKT38A-601R BKT38A-600R Universal Mounting Bracket Universal Mounting Bracket with 2 screws 5 Universal Mounting Brackets with 10 screws Refrigeration Tools & Instruments Accessories, Supplies & Commodities Selection Chart K-311 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 34 PART NO DESCRIPTION RLD-H10PM-1 Refrigerant leak detector and charger Accessories PART NO DESCRIPTION 14 inch flexible probe extension 120 VAC power supply adapter Cigarette lighter adapter Replacement battery charger Replacement battery pack recharger (included in RLD-H10-105) Rechargeable 12 V battery belt pack Replacement sensor Spare battery for RLD-H10P Replacement probe assembly SPECIFICATIONS RLD-H10PM Refrigerant Leak Detector 12 VDC, charger 13.5 VDC. An adaptor is available to allow unit to run from 120 VAC power (RLDH10-101). Power Requirements Sensing Element Type Approximate Sensitivity Positive Ion Emission Heated Diode Switch Position Small Medium Large Alarm Sensitivity (moving probe) >0.05 oz per year CFC and HCFC >0.5 oz per year HFC >0.5 oz per year CFC and HCFC >1.0 oz per year HFC >2.0 oz per year CFC and HCFC >5.0 oz per year HFC Leak Alarm Response Time Audible alarm, visible Approximately 1 second Warmup Time Approximately 2 minutes Accuracy Meets SAE J1627 test requirements Probe Length Approximately 4.5 ft ( 1.4m) Ambient Operating Conditions Ambient Storage Conditions Case 32 to 104°F (0 to 40°C); 5-90% RH, non-condensing Rugged high-density polyethylene Dimensions (H x W x D) 5.5 x 10.5 x 8.5 in. (140 x 267 x 216 mm) Shipping Weight Agency Listings lamp neon 14 to 140°F (-10 to 60°C); 5-90% RH, non-condensing 5 lb (2.3 kg) Motors Electrical UL and cUL Listed, File SA9717 CE Approved K-312 Refrigeration RLD-H10-100 RLD-H10-101 RLD-H10-102 RLD-H10-103 RLD-H10-104 RLD-H10-105 RLD-H10-601R RLD-H10-604R RLD-H10-607R Heating Components Repair Parts Contact Johnson Controls application engineering at (414) 524-5535 for repair information. Indoor Air Quality FEATURES • Positive ion emission heated diode sensor provides the most sensitivity available today, while still detecting all halogenated refrigerant gases. • Rechargeable battery w/low & full charge LED’s enhances portability - no external power req. • Switchable for manual or automatic balance to allow user to chose preferred method compensation for background refrigerant levels. • Exceeds SAE J1627 moving probe specification, which minimizes call-backs because the leak is found the first time, is verifiable, and the fix can be confirmed. • External calibration source and calibration indicators indicate when the sensor is working properly and serves as a reference point to judge leak size. Thermostats DESCRIPTION The RLD-H10PM is a professional grade leak detector used by refrigeration and A/C technicians. This detector senses all CFC, HCFC, & HFC refrigerants and blends, such as R12, R502, R22, R404a, R507, and R134a among others. The RLD- H10PM is self-powered with a rechargeable battery & provides both manual and automatic compensation for background levels of refrigerant. A full line of accessories and maintenance kits are also available, including replacement sensors, tune-up kits, probe extensions, battery chargers, and leak vial bottles. The RLD-H10PM is a direct replacement for the RLD-H10P. Oils & Chemicals Selection Chart Accessories, Supplies & Commodities RLD-H10PM Tools & Instruments JOHNSON CONTROLS - Refrigerant Leak Detector Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 35 JOHNSON CONTROLS - Refrigerant Leak Detector RLD-H10G Selection Chart DESCRIPTION The RLD-H10G is a professional grade leak detector for use by refrigeration and air conditioning technicians. This detector senses all CFC, HCFC, and HFC refrigerants and blends, such as R12, R502, R22, R404a, R507 and R134a, among others. The RLD-H10G plugs into a 120 VAC outlet. Motors Compressors, Chillers, Condensers Refrigeration Heating Components Electrical FEATURES • Positive ion emission heated diode sensor provides the most sensitivity available today, while still detecting all halogenated refrigerant gases. • Halogen selective sensing eliminates many sources of possible false alarms due to background contamination. • High quality air pump supplies constant air flow to sensor so it responds quickly to leaks; also helps sensor recover quickly after exposure to refrigerant so leak can be verified. • Visual and audible signal facilitates sensing in noisy equipment rooms with 360° visibility and piercing tone; frequency of noise/light indicates magnitude of leak. • Exceeds SAE J1627 moving probe specification; minimizes service time because the leak is found the first time, is verifiable, and the fix can be confirmed. • External calibration source indicates when the sensor is working properly and serves as a reference point to judge leak size. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality PART NO RLD-H10G-1 DESCRIPTION Refrigerant Leak Detector control unit with a manual balancing circuit, a probe with a 4.5 ft cable, and a 6 ft power cord Accessories PART NO RLD-H10-600R RLD-H10-602R RLD-H10-603R RLD-H10-606R DESCRIPTION Tune-up kit includes: sensor, 100 filters, 3 airflow indicator balls, 3 probe tips and leak vial Maintenance kit includes:100 replacement filters,3 airflow indicator balls, and 3 probe tips Replacement leak vial Replacement clear plastic probe tip SPECIFICATIONS Power Requirements Sensing Element Type Approximate Sensitivity Leak Alarm Response Time Warm-up Time Accuracy Probe Length Ambient Operating Conditions Ambient Storage Conditions Case Dimensions (H x W x D) hipping Weight Agency Listings RLD-H10G Refrigerant Leak Detector 120 VAC at 60 Hz Positive Ion Emission Heated Diode Switch Position Alarm Sensitivity (moving probe) Small >0.05 oz per year CFC or HCFC; >0.5 oz per year HFC Medium >0.5 oz per year CFC or HCFC; >1.0 oz per year HFC Large >3.0 oz per year CFC or HCFC; >5.0 oz per year HFC Audible alarm, visible neon lamp Approximately 1 second Approximately 2 minutes Meets SAE J1627 test requirements Approximately 4.5 ft (1.4 m) 32 to 113° F (0 to 45° C); 5 to 90% RH, non-condensing 14 to 140° F (-10 to 60° C); 5 to 90% RH, non-condensing Vinyl 2.8 x 8.8 x 5.0 in. (71 x 224 x 127 mm) 3.2 lbs (1.4 kg) UL listed, file SA 9717 K-313 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 36 DESCRIPTION The F61 Series Flow Switches are Single-Pole, Double-Throw (SPDT) flow switches used on fluid lines carrying water, ethylene glycol, or other fluids not classified as hazardous. They can be wired to energize one device and de-energize another device powered from the same source when fluid flow either exceeds or drops below the set flow rate. The F61MG type flow switches are used for low- energy loads to operate small relays, solenoid valves, and electronic control circuits. These flow switches have gold-plated contacts for improved electrical performance in low voltage, low current circuits. FEATURES • Stainless steel paddle w/3 segments for use in pipes from 1” to 3” (25-75 mm) diameter • Paddle segments can be removed or trimmed as needed • F61KB-11 and F61MB-1 include a 6” (152 mm) paddle for pipes 4” to 6” (102-152 mm) • Gold-plated contacts on F61MG-1 reduce intermittent contact problems in low-voltage and low-current circuits APPLICATIONS • Use on lines carrying water or ethylene glycol • Not for use with hazardous fluids or in hazardous atmospheres Motors SELECTION CHART Electrical F61 SERIES FLOW SWITCH (Standard Flow Rate — SPDT) Heating Components JOHNSON CONTROLS - LIQUID LEVEL AND FLOW CONTROLS Compressors, Chillers, Condensers Refrigeration ENCLOSURE BELLOWS PADDLE F61KB-11C NEMA 1 Phosphor Bronze F61LB-1C F61MB-1C NEMA 1 NEMA 3R Phosphor Bronze Phosphor Bronze F61MB-5C NEMA 3R Stainless Steel F61MG-1*C NAME 3R Phosphor Bronze Stainless Steel; 3-piece Paddle (3 in., 2 in., and 1 in. Segments)Installed; 6 in. Paddle Supplied Uninstalled Stainless Steel; 3-piece Paddle (3 in., 2 in. and 1 in. Segments)Installed Stainless Steel; 3-piece Paddle (3 in., 2 in., and 1 in. Segments)Installed; 6 in. Paddle Supplied Uninstalled Stainless Steel; 3-piece Paddle (3 in., 2 in., and 1 in. Segments)Installed; 6 in. Paddle Supplied Uninstalled Stainless Steel; 3-piece Paddle (3 in., 2 in., and 1 in. Segments)Installed; 6 in. Paddle Supplied Uninstalled Thermostats PART NO Indoor Air Quality SELECTION CHART K-314 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals *Gold plated Contact Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 37 JOHNSON CONTROLS - LIQUID LEVEL AND FLOW CONTROLS F61 SERIES FLOW SWITCH (Low Flow Rate — SPDT) SELECTION CHART DESCRIPTION For use on liquid lines using water, ethylene glycol solutions, or other liquids not injurious to the brass and phosphor bronze parts. The SPDT contact switch is activated by a low flow rate however, it has a large flow capacity with a minimum pressure drop. APPLICATIONS Typical applications include: • Water purification and treatment systems • Booster pumps • Fast shutdown on high input boilers to guard against circulation failure • Cooling systems for electronic tubes, bearings and compressors Electrical Motors Compressors, Chillers, Condensers Refrigeration SELECTION CHART PART NO F61KD-4C 3/4 x 3/4 in. (19 x 19 mm) 1 F61KD-8C 3/4 x 3/4 in. (19 x 19 mm) 1 F61MD-1C 1/2 x 1/2 in. (13 x 13 mm) 3R F61MD-2C 3/4 x 3/4 in. (19 x 19 mm) 3R Minimum 0.6 (2.27);Maximum 1.1 (4.17) Minimum 0.6 (2.27);Maximum 1.1 (4.17) Minimum 8.5 (32.2);Maximum 9.0 (34.1) Minimum 0.6 (2.27);Maximum 1.1 (4.17) Minimum 0.6 (2.27);Maximum 1.1 (4.17) Minimum 0.3 (1.14);Maximum 0.9 (3.4) Minimum 0.3 (1.14);Maximum 0.9 (3.4) Minimum 4.5 (17.1);Maximum 6.3 (23.9) Minimum 0.3 (1.14);Maximum 0.9 (3.4) Minimum 0.3 (1.14);Maximum 0.9 (3.4) 250° F (121° C) 32° F (0° C) MAXIMUM LIQUID PRESSURE 150 psig (1034 kPa) 250° F (121° C) 32° F (0° C) 150 psig (1034 kPa) 250° F (121° C) 32° F (0° C) 150 psig (1034 kPa) 250° F (121° C) –20° F (–29° C) 150 psig (1034 kPa) 250° F (121° C) –20° F (–29° C) 150 psig (1034 kPa) DESCRIPTION This control detects airflow or the absence of airflow in ducts, responding only to the velocity of air movement. The one-piece stainless steel paddle can be trimmed, if necessary. The control is supplied with mounting plate gasket. The range adjusting screw permits field adjustment of flow rate setting. SELECTION CHART PART NO PADDLE SIZE (in) DIMENSION MAX AMBIENTTEMP °F (°C) MAX AIR VELOCITY F62AA-8C F62AA-9C 2-1/8 in. x 6-7/8 in 3-1/8 in. x 6-7/8 in. 10-3/8 in. H (including paddle),4 in. W, 2-13/16 in. D 10-3/8 in. H (including paddle),4 in. W, 2-13/16 in. D 100 (40) 100 (40) 2000 FPM (10 m/sec.) 2000 FPM (10 m/sec.) Tools & Instruments Refrigeration LIQUID TEMP MAXIMUM MINIMUM SELECTION CHART Accessories, Supplies & Commodities Oils & Chemicals ADJUSTMENT RANGE — GPM (L/Min) R to Y Closes Flow Increase Opens Flow Decrease F62 SERIES AIRFLOW SWITCH (SPDT — Contact Unit) Thermostats Indoor Air Quality Heating Components F61KD-3C INLET AND OUTLET SIZE ENCLOSURE NEMA FEMALE NPT TYPE 1/2 x 1/2 in. (13 x 13 mm) 1 K-315 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 38 SELECTION CHART (For Closed Tanks) DESCRIPTION The F63 can be wired to close one circuit and open another circuit when liquid level rises above or falls below the required level. The F63AC-1 has a NEMA 1 general purpose enclosure. The F63BF-1 has a NEMA 3R rain tight enclosure. Not for use with hazardous fluids or in hazardous atmosphere. FEATURES • SPDT snap-acting switch • Rugged steel enclosure SELECTION CHART (For Closed Tanks) SPDT SPDT MAXIMUM LIQUID PRESSURE MAX AMBIENT TEMP °F (°C) General Purpose NEMA 1 Vaportight/ Raintight NEMA 3R 180 (40) 180 (40) MAXMUM LIQUID TEMP MINIMUM 32 (0)* –20 (–29)** 100 (690) 100 (690) Heating Components F63AC-1C F63BF-1C TYPE OF ENCLOSURE 250 (121) 250 (121) *Or Ambient Dew Point. **Or Liquid Freezing Point. F92 SERIES AIR VOLUME CONTROL (For Shallow Wells) SELECTION CHART (For Shallow Wells) DESCRIPTION Shallow well air volume control prevents water logged or air bound tanks by maintaining proper air volume. FEATURES • Internal parts are constructed of brass to minimize corrosion • High impact plastic body is resistant to mechanical damage and corrosion APPLICATIONS • Air volume control for shallow well tanks Indoor Air Quality SWITCH ACTION Thermostats PART NO Motors F63 SERIES LIQUID LEVEL FLOAT SWITCH Electrical JOHNSON CONTROLS - LIQUID LEVEL AND FLOW CONTROLS Compressors, Chillers, Condensers Refrigeration TANK CONNECTOR SUPPLY TANK F92B-1C F92B-1C F92B-9C 1/4 in. Tap for Gauge 0.016 in. Brass Orifice 1/4 in. Tap for Gauge 0.016 in. Brass Orifice 1/4 in. Tap for Gauge 1-1/4 in. (32 mm) Male NPT 1-1/4 in. (32 mm) Male NPT 1-1/4 in. (32 mm) Male NPT 80 lbs (552 kPa) Max Pressure Min Diameter 9 in. (229 mm) 80 lbs (552 kPa) Max Pressure Min Diameter 9 in. (229 mm) 80 lbs (552 kPa) Max Pressure Min Diameter 9 in. (229 mm) K-316 Refrigeration Tools & Instruments Accessories, Supplies & Commodities GAUGE TAPPING Oils & Chemicals SELECTION CHART (For Shallow Wells) PART NO Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 39 Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS - LIQUID LEVEL AND FLOW CONTROLS F93 Series Air Volume Control (For Deep Wells) Features • internal parts are constructed of brass to tanks from becoming air bound by minimize corrosion maintaining proper air volume. Float • high impact plastic body is resistant to operation opens the air valve on water mechanical damage and corrosion level drop (increase in tank air), and permits air to bleed from the tank to Applications the atmosphere as the tank refills. The F93 Series controls are designed for air volume control for deep well tanks. This Deep Well Air Volume Control prevents Selection Chart (For Deep Wells) Part Number F93B-1C F93H-1C Gauge Tapping 1/4 in. Tap for Gauge Minimum Pressure Release — Set at 25 lb Non adjust. Tank Connector 1 1/4 in. National Pipe Thread Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Description K-317 Supply Tank 80 lb Maximum Pressure Minimum Diameter 9 inches F93B-1 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 40 PART NO P66AAB-1C P66AAB-3C P66AAB-6C P66AAB-9C P66AAB-10C P66AAB-11C P66AAB-12C P66AAB-14C P66AAB-15C P66AAB-25C P66AAB-26C OPERATING RANGE EFFECTIVE PRESSURE RANGE MAXIMUM psig (kPa) THROTTLING RANGE (Adjustable) OVERPRESSURE psig (Factory Setting) psig (kPa) (Fixed) (kPa) 190-250 (1310-1724) 60 (414) 140-350 (965-2413) 450 (3103) 180-240 (1241-1655) 60 (414) 140-350 (965-2413) 450 (3103) 170-230 (1172-1586) 60 (414) 140-350 (965-2413) 450 (3103) 170-230 (1172-1586) 60 (414) 140-350 (965-2413) 450 (3103) 190-250 (1310-1724) 60 (414) 140-350 (965-2413) 450 (3103) 140-200 (965-1379) 60 (414) 140-350 (965-2413) 450 (3103) 220-280 (1517-1931) 60 (414) 140-350 (965-2413) 450 (3103) 220-280 (1517-1931) 60 (414) 140-350 (965-2413) 450 (3103) 190-250 (1310-1724) 60 (414) 140-350 (965-2413) 450 (3103) 180-240 (1241-1655) 60 (414) 140-350 (965-2413) 450 (3103) 220-280 (1517-1931) 60 (414) 140-350 (965-2413) 450 (3103) CONTROL VOLTAGE START VOLTAGE % OF LINE CAPILLARY LENGTH (in) 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 10 16 16 40 16 16 16 40 40 10 40 60 60 60 60 120 60 120 120 60 120 60 CONTROL VOLTAGE START VOLTAGE % OF LINE CAPILLARY LENGTH (in) 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 24 VAC, 1 VA, Class 2 10 16 16 40 60 60 60 60 START VOLTAGE % OF LINE CAPILLARY LENGTH (in) 16 16 10 16 16 40 120 60 80 60 120 60 P66AAB Low Pressure Models PART NO P66AAB-4C P66AAB-7C P66AAB-13C P66AAB-19C OPERATING RANGE EFFECTIVE PRESSURE RANGE MAXIMUM psig (kPa) THROTTLING RANGE (Adjustable) OVERPRESSURE psig (Factory Setting) psig (kPa) (Fixed) (kPa) 135-165 (931-1138) 30 (207) 80-200 450 (3103) 85-115 (586-793) 30 (207) 80-200 450 (3103) 60-90 (414-621) 30 (207) 60-180 450 (3103) 115-145 (9793-998) 30 (207) 80-200 450 (3103) P66ABB All General Application Models PART NO P66ABB-21C P66ABB-24C P66BAB-1C P66BAB-3C P66BAB-4C P66BAB-5C OPERATING RANGE EFFECTIVE PRESSURE RANGE MAXIMUM CONTROL VOLTAGE psig (kPa) (Factory THROTTLING RANGE (Adjustable) OVERPRESSURE psig Setting) psig (kPa) (Fixed) (kPa) 220-280 (1517-1931) 60 (414) 140-350(965-2413) 450 (3103) 24 VAC, 1 VA Class 2 190-250 (1172-1724) 60 (414) 140-350(965-2413) 450 (3103) 24 VAC, 1 VA Class 2 190-250(1310-1724) 60(414) 140-350(965-2413) 450 (3103) 24 VAC, 1 VA Class 2 170-230(1172-1586) 60(414) 140-350(965-2413) 450 (3103) 24 VAC, 1 VA Class 2 190-250(1310-1724) 60(414) 140-350(965-2413) 450 (3103) 24 VAC, 1 VA Class 2 190-250(1310-1724) 60(414) 140-350(965-2413) 450 (3103) 24 VAC, 1 VA Class 2 K-318 Motors Electrical Heating Components Indoor Air Quality The P66 is a pressure-actuated electronic motor speed controller. By directly sensing pressure, this device electronically varies the speed of a fan motor. This control can be used with a single-phase permanent split capacitor and shaded pole motors that are approved by the motor and equipment manufacturer for speed control applications. To prevent overheating, use a ball bearing motor with a service factor of at least 1.25. Thermostats DESCRIPTION APPLICATIONS Oils & Chemicals FEATURES • Air conditioning for computer rooms, head • Exclusive Johnson Controls/Penn pressure sensor rapidly responds to changes in air delivery pressure control. • Commercial air conditioning, head pressure requirements. • Soft start provides a smooth start-up. This control • Commercial air refrigeration, head pressure significantly reduces motor starting noise and abrupt changes in motor speed that could occur control. • Use only with ball bearing motors that have between zero and full output voltage time delay and bypass circuitry are not required because of a service factor of 1.25 or greater the soft start feature. • This universal model can be used on a wide This control is designed to replace on/off fan range of voltage applications (208-240/277/480 cycling controls, multiple speed motors, condenser volt, 60 Hz motor control) flood back systems, temperature fan speed • Available with one or two pressure sensors for controls, and modulating louver systems. single and dual compressor systems the control selects the input with the greatest demand. ELECTRICAL RATING • Choice of two effective throttling ranges (ETR)= 30 or 60 psi (207 or 414 kpa). Motor Rating VAC 208 240 277 480 • NEMA 1 case for versatile mounting. AC Full Loading Amp 8.0 8.0 6.9 4.0 • Built in radio frequency interference (RFI) Suppression 60 psi AC locked Rotor Amp 16.5 16.5 14.3 10.5 • Built in voltage surge protection. Accessories, Supplies & Commodities P66AAB High-Pressure Models Tools & Instruments SELECTION CHART Refrigeration JOHNSON CONTROLS - P66 SERIES ELECTRONIC FAN SPEED CONTROL Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 41 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS - Condenser Fan Speed Control VFD66 Description The VFD66 Series Condenser Fan Speed Controls are designed for speed control of 3-phase condenser fan motors in refrigeration and HVAC systems. The VFD66 controls regulate condenser fan motor speed by varying the frequency and voltage of the power supplied to the motor the VFD66 controls use input signals from various devices to adjust fan speed and optimize condenser head pressure, especially during low ambient conditions. Condenser fan speed may be controlled by pressure or temperature. The VFD66 controls accept input signals from the P35 Pressure Transducer, P399 Electronic Pressure Transducer, System 350™ controls or any other device that provides a 0-5 VDC or 0-10 VDC analog input signal. The VFD66 controls have a simple interface, and are easy to understand and use. Minimal end-user setup is required because of the application-specific design. Features • Permits application with 0-5 VDC or 0-10 VDC controllers, sensors, and transducers including Johnson Controls System 350TM • Allows use on dual refrigeration circuits cooled by a single fan • Provides installation ease and flexibility • Handles 3-phase motors ranging from fractional to multiple hp at 208/230 VAC or 400/460 VAC • Provides fast, easy installation and setup • NEMA 1 or NEMA 4 enclosures Applications The VFD66 controls are intended for air-cooled condenser fan speed control in refrigeration and HVAC applications: • Commercial air-cooled condensers • Cooling tower fans • Fans in evaporative condensing units. The VFD66 controls allow the system to: • Maintain optimum condenser head pressure in low ambient temperature conditions • Eliminate short cycling in low ambient or changing load conditions • Match the condenser fan speed to the load on the condenser, which increases the efficiency of the refrigeration system, reduces electricity cost, and helps maintain a constant evaporator temperature. Other advantages of using the VFD66 controls are: • Stabilized condenser head pressures help optimize compressor operation, which may reduce wear & extend compressor life • Eliminating condenser fan short cycling may result in reduced motor repair and replacement costs • Stable evaporator temperatures extend refrigerated product life and provide more consistent comfort cooling Selection Chart NEMA 1 Enclosure without Alarm Output Kit = VFD66 Model Packaged VFD66 Model with P35AG-9200 VFD66AAA-1C VFD66AAA-100C VFD66BAA-1C VFD66BAA-100C VFD66CAA-1C VFD66CAA-100C VFD66DAA-1C VFD66DAA-100C VFD66EBA-1C VFD66EBA-100C VFD66FBA-1C VFD66FBA-100C NEMA 1 Enclosure with Alarm Output VFD66AAE-1C VFD66BAE-1C VFD66CAE-1C VFD66DAE-1C VFD66EBE-1C VFD66FBE-1C Voltage 230 VAC 50 Hz, 208/230 VAC 60 Hz 400 VAC 50 Hz, 460 VAC 60 Hz 230 VAC 50 Hz, 208/230 VAC 60 Hz 400 VAC 50 Hz, 460 VAC 60 Hz 230 VAC 50 Hz, 208/230 VAC 60 Hz 400 VAC 50 Hz, 208/230 VAC 60 Hz Max Amp 4.0 1.8 7.5 3.6 10.6 5.5 ACCESSORIES PART NO P35AG-9200R VFD66-CVR-1C A350PS-1C P352PN-3C P399AAA-1-200C P399AAC-1-200C P399BAA-1-200C P399BAC-1-200C P399CAA-1-200C DESCRIPTION Pressure Transducer, 0-350 psi range External Potentiometer Replacement Cover (NEMA 1 models only) Proportional Plus Integral Temperature Control Proportional Plus Integral Pressure Control Pressure Transducer, 0-100 psis, 1/8 in. NPTM pressure connection, with 6-1/2 ft (2m)wire harness with pigtails Pressure Transducer, 0-100 psis, 1/4 in. SAE female flare pressure connection with valve depressor, with 6-1/2 ft (2m) wire harness with pigtails Pressure Transducer, 0-500 psis, 1/8 in. NPTM pressure connection, with 6-1/2 ft (2m)wire harness with pigtails Pressure Transducer, 0-500 psis, 1/4 in. SAE female flare pressure connection with valve depressor, with 6-1/2 ft (2m) wire harness with pigtails Pressure Transducer, 0-750 psis, 1/8 in. NPTM pressure connection, with 6-1/2 ft (2m)wire harness with pigtails K-319 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 42 Pressure Transducer, 0-750 psis, 1/4 in. SAE female flare pressure connection with valve depressor, with 6-1/2 ft (2m) wire harness with pigtails Electronic Pressure Transducer, 0-100 psi range; 1/8 in. NPT male connector Electronic Pressure Transducer, 0-100 psi range; 1/4 in. SAE female connector Electronic Pressure Transducer, 0-500 psi range; 1/8 in. NPT male connector Electronic Pressure Transducer, 0-500 psi range; 1/4 in. SAE female connector Electronic Pressure Transducer, 0-750 psi range; 1/8 in. NPT male connector Electronic Pressure Transducer, 0-750 psi range; 1/4 in. SAE female connector Wire Harness, 6 1/2 ft (2.0 m.) length with pigtails Wire Harness, 13 ft (4.0 m.) length with pigtails Wire Harness, 19-5/8 ft (6.0 m.) length with pigtails SPECIFICATIONS 230 VAC 50 Hz, 208/230 VAC 60Hz, or 400 VAC 50 Hz / 460 VAC, 60 Hz, continuous duty Johnson Controls/PENN(A350P, P35, P352P, P399, Performer Rack Controllers) Johnson Controls/Metasys(AHU, DME, DX9100, UNT, VAV) Also works with rack controllers, electronic pressure transducers, and other 0-5 VDC or 0-10 VDC input signal devices made by various manufacturers. Pulse Width Modulation Carrier Frequency 2.3 kHz Motor Requirements Service Factor 1.0, VFD rated motors required 460 VAC, 60 Hz, continuous duty Overload Capacity 110% of ampere rating for 1 minute Maximum Output Ampere Limit 110% of ampere rating, non-adjustable Start/Stop Line starting with single auto-restart 30 seconds after fault (500 second cycle) Storage Temperature -40 to 158°F (-40 to 70°C) Operating Temperature Altitude -40 to 140°F (-40 to 60°C) 3300 feet (1,000 meters) (a) maximum without derating (a) Relative Humidity 0 to 95% non-condensing (storage and operating) Available Enclosures NEMA 1, UL Type 1 convection cooled (3 hp is fan cooled). NEMA 4 convection and internal fan cooled Enclosures have three 1/2 in. trade size conduit openings. Lead Length Agency Listings Emissions Compliance Dimensions (H x W x D) Shipping Weight Thermostats Output Voltage/Frequency / Maximum lead length between motor and VFD66 is 50 ft (15 meters) UL Listed, File E184521, Guide NMMS cUL Listed, File E184521, Guide NMMS7 FCC (US), DOC (Canada), CE (With additional components, see product literature) NEMA 1, 1-3 hp 7-1/2 x 7-1/4 x 6-1/4 in. (190 x 184 x 159 mm) NEMA 4, 1 hp 8-13/16 x 7-7/16 x 9-1/16 in. (224 x 189 x 230 mm) NEMA 4, 2 hp 11-13/16 x 7-7/16 x 9-1/16 in. (300 x 189 x 230 mm) NEMA 1 Enclosure models – 5.6 lb (2.5 kg) NEMA1 Enclosure models with Optional Alarm Board – 5.8 lb (2.6 kg) NEMA 4 Enclosure (1 hp nominal) models – 5.6 lb (2.5 kg) NEMA 4 Enclosure (2 hp nominal) models – 7.2 lb (3.3 kg) Tools & Instruments (a) Maximum Output Ampere Ratings affected by altitudes over 3300 ft (1000m) and by temperatures over 122°F (50°C). See Product Literature for more information. Oils & Chemicals Input Devices VFD66 Condenser Fan Speed Control 230 VAC 50 Hz, 208/230 VAC 60Hz, or 400 VAC 50 Hz Accessories, Supplies & Commodities Input Power Voltage/Frequency K-320 Refrigeration P399CAC-1-200C P399AAA-1C P399AAC-1C P399BAA-1C P399BAC-1C P399CAA-1C P399CAC-1C WHA-P399-200C WHA-P399-400C WHA-P399-600C DESCRIPTION Motors PART NO Electrical Accessories (Continued) Heating Components VFD66 Condenser Fan Speed Control (Continued) Indoor Air Quality JOHNSON CONTROLS - Condenser Fan Speed Control Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 43 JOHNSON CONTROLS - Pressure Actuated Water Valve Repair Parts V43 Series Description The V43 is a pilot pressure actuated modulating valve for use on water cooled condensers that require a large flow capacity. Valves open on pilot pressure increase. Motors Compressors, Chillers, Condensers Refrigeration Features • field proven to give long lasting, trouble-free service on the job • easy to adjust and service • simple and efficient manual flushing Applications Electrical • water cooled refrigeration condensers that require a large flow capacity Selection Charts V43 Series Pressure Actuated Water Valves (except NAVSEA valves, see below) Inlet and Ship Part Pipe Size Opening Point Adjustment Range 1 Outlet Wt. Lb. Number (in.) psig (kPa) V43AS-2 Commercial Type – Non-Corrosive RefrigerantsS (R) Heating Components V43AS-1C V43AT-1C V43AV-1C 70 to 150 (483 to 1034) 4 Hole ASME Flanged 3 V43AV-2C V43AW-2C Indoor Air Quality Thermostats Oils & Chemicals 160 to 260 (1103 to 1793) 2 1/2 V43AT-2C 4 8 Hole ASME Flanged 160 to 260 (1103 to 1793) 3 65 70 to 150 (483 to 1034) 90 160 to 260 (1103 to 1793) 90 142 160 to 260 (1103 to 1793) 90 Maritime Type – Non-Corrosive Refrigerants (R) V43BS-6C 70 to 150 (483 to 1034) 2 V43BT-6C 160 to 260 (1103 to 1793) 70 to 150 (483 to 1034) 2 1/2 V43BT-7C V43BV-10C 3 V43BV-7C 4 Hole ASME Flanged 160 to 260 (1103 to 1793) 70 to 150 (483 to 1034) 140 to 260 (1103 to 1793) 59 65 90 1. Refer to the V 43 V alv e Capaci ty and S el ec ti on Di agrams on the foll ow ing page. V43 Series Pressure Actuated Water Valves, Navy NAVSEA Certified Part Number Inlet and Outlet Pressure Connector Pipe Size (in.) Opening Point Adjustment Range – psig (kPa) Ship Wt. Lb. Navy NAVSEA Certified – Non-Corrosive Refrigerants (R) V43BS-3C V43CS-1C 4 Hole ASME Flange 2 V43CS-2C V43BT-3C V43CT-2C 2 1/2 V43BV-4C V43CV-1C V43BW-7C 4 Hole ASME Flange 6 Hole Navy Flange 4 Hole ASME Flange 3 V43CV-2C V43BW-2C 6 Hole Navy Flange 4 8 Hole Navy Flang 8 Hole ASME Flange 1/4 in. Male Flared Conn. 59 Female Sweat Conn. 1/4 in. Male Flared Conn. 70 to 150 (483 to 1034) 65 Female Sweat Conn. 90 1/4 in. Male Flared Conn. Female Sweat Conn. 1/4 in. Male Flared Conn. Note: Flan ges ha ve NPT (National Pip e T hread) Tools & Instruments Refrigeration 59 Commercial Type - Ammonia (R) V43AV-5C V43BS-7C Accessories, Supplies & Commodities 70 to 150 (483 to 1034) 2 V43AS-2C K-321 160 to 260 (1103 to 1793) 142 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 44 JOHNSON CONTROLS - Pressure Actuated Water Valve Selection Charts K-322 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors COMMERCIAL TYPE – NON-CORROSIVE REFRIGERANTS (R) Compressors, Chillers, Condensers Refrigeration Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 45 JOHNSON CONTROLS - Pressure Actuated Water Valve Selection Charts MARITIME TYPE – NON-CORROSIVE REFRIGERANTS (R) Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-323 Sec10g refridge 46pages_Fridge 12/10/2010 3:15 PM Page 46 JOHNSON CONTROLS - Pressure Actuated Water Valve Selection Charts K-324 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors NAVY NAVSEA Certified – NON-CORROSIVE REFRIGERANTS (R) Compressors, Chillers, Condensers Refrigeration Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 1 JOHNSON CONTROLS - V46 SERIES PRESSURE ACTUATED WATER REGULATING VALVE SELECTION CHART COMMERCIAL TYPE, LOW FLOW — NON-CORROSIVE REFRIGERANTS (R)** DESCRIPTION The V46 is a pressure actuated, modulating valve that is suitable for use either on closed or open systems. Direct acting valves open on pressure increase. This type of valve is primarily used to regulate the flow of water or glycol to a water cooled condenser on refrigeration system. Reverse acting valves open on pressure decrease and are generally used in parallel with a direct-acting valve or for bypass operation. FEATURES • no close fitting or sliding parts in water passages • minimizes chatter or water hammer • free movement of all parts provides smooth pressure modulation • refrigerant adjustment is not affected by water pressure • withstands high hydraulic shock without damage • range spring does not come in contact with cooling water • easy manual flushing, if required • 3/8, 1/2, and 3/4-in. valves may be disassembled and reassembled without detaching from the refrigeration system or without pumping down APPLICATIONS Modulates flow of water or glycol to a water cooled condenser on a refrigeration system. Examples include: • Ice machines • Computer room air conditioning units • Ice cream machines • Refrigeration cases SPECIFICATIONS V46 SERIES PRESSURE ACTUATED WATER REGULATING VALVES Maximum Water Temperature 170° F (77° C) 3/8 to 3/4-in. cast brass1 in. and larger Valve Commercial: cast iron with a special finish Body Navy and Maritime: Cast naval bronze with monel interior parts Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration COMMERCIAL TYPE, LOW FLOW – NON CORROSIVE REFRIGERANTS (R)** PART NO PIPE SIZE (in) INLET AND OUTLET Threaded OPENING POINT RANGE psig (kPa) 70 to 250 (483 to 1793) V46AA-1C 3/8 NPT V46AB-1C PRESSURE ELEMENT STYLE 30 in. Capillary 1/4-in. Flare Nut (Style 45) 1/2 NPT Threaded 70 to 250 (483 to 1793) 30 in. Capillary 1/4-in. Flare Nut (Style 45) V46AC-1C 3/4 NPT Threaded 70 to 250 (483 to 1793) 30 in. Capillary 1/4-in. Flare Nut (Style 45) V46AD-1C 1 NPT Threaded 70 to 250 (483 to 1793) 30 in. Capillary 1/4-in. Flare Nut (Style 45) V46AE-1C 1-1/4 NPT Threaded 70 to 250 (483 to 1793) 30 in. Capillary 1/4-in. Flare Nut (Style 45) V46AJ-2C V46EK-2C V46AL-2C V46AM-2C V46AR-1C 1/2 3/4 1 1-1/4 1-1/2 Union Union Union Union 4-Hole ASME Flange 70 to 250 (483 to 1793) 70 to 250 (483 to 1793) 70 to 250 (483 to 1793) 70 to 250 (483 to 1793) 70 to 250 (483 to 1793) 30 in. Capillary 1/4-in. Flare Nut (Style 45) 30-in. Capillary 1/4in. Flare Nut (Style 46) 30-in. Capillary 1/4in. Flare Nut (Style 46) 30-in. Capillary 1/4in. Flare Nut (Style 46) 30-in. Capillary 1/4-in. Flare Nut (Style 45) V46AS-1C V46AS-2C V46AT-1C V46AT-2C V46DA-2C 2 2 2-1/2 2-1/2 3/8 NPT 4-Hole ASME Flange 4-Hole ASME Flange 4-Hole ASME Flange 4-Hole ASME Flange Threaded 70 to 170 (483 to 1172) 160 to 250(1103 to 1793) 70 to 170 (483 to 1172) 160 to 260(1103 to 1793) 70 to 260 (483 to 1793) 1/4-in. Male Flare Fitting (Style 5) 1/4-in. Male Flare Fitting (Style 5) 1/4-in. Male Flare Fitting (Style 5) (Note 1) 30-in. Capillary 1/4-in. Flare Nut (Style 45) K-325 SEAT REPAIR KIT REPLACEMENT POWER ELEMENTS STT14A-600R SEP91A-600R and SEC37A-601R* STT15A-602R SEP91A-602R and SEC37A-602R* STT16A-601R SEP91A-601R and SEC37A-602R* STT17A-609R SEP91A-603R and SEC37A-600R* STT17A-610R SEP91A-603R and SEC37A-600R* STT15A-602R SEP77A-605R STT16A-601R SEP127A-600R STT17A-609R SEP107A-602R STT17A-610R SEP107A-602R STT17A-610R SEP91A-603R and SEC37A-600R* STT18A-600R SEP81A-602R STT18A-600R SEP81A-601R STT81A-601R SEP81A-602R STT81A-601R SEP81A-601R STT14A-630R SEP91A-600R and SEC37A-601R† Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 2 SELECTION CHART COMMERCIAL TYPE — AMMONIA (R) PART NO PIPE SIZE (in) V46AC-8C V46AD-4C V46AE-4C V46AR-2C V46AS-3C V46AT-3C 3/4 NPT 1 NPT 1-1/4 NPT 1-1/2 2 2-1/2 INLET AND OUTLET OPENING POINT RANGE psig (kPa) Threaded 100 to 200 (690 to 1379) Threaded 100 to 200 (690 to 1379) Threaded 100 to 200 (690 to 1379) 4 Hole ASME Flange 100 to 200 (690 to 1379) 4 Hole ASME Flange 100 to 200 (690 to 1379) 4 Hole ASME Flange 100 to 200 (690 to 1379) PRESSURE ELEMENT STYLE SEAT REPAIR KIT 1/4-in. Female NPT (Style 15) 1/4-in. Female NPT (Style 15) 1/4-in. Female NPT (Style 15) 1/4-in. Female NPT (Style 15) 1/4-in. Female NPT (Style 15) 1/4-in. Female NPT (Style 15) STT16A-601R STT17A-609R STT17A-610R STT18A-610R STT18A-600R STT18A-601R REPLACEMENT POWER ELEMENTS SEP70A-601R SEP70A-604R SEP70A-604R SEP70A-604R SEP70A-605R SEP70A-605R Motors JOHNSON CONTROLS - V46 SERIES PRESSURE ACTUATED WATER REGULATING VALVE Compressors, Chillers, Condensers Refrigeration 3/4 NPT V46BD-2C 1 NPT V46VE-2C 1-1/4 NPT V46BS-4C 2 V46BT-4C 2-1/2 SEP13A-600R STT17A-613R SEP13A-603R STT17A-611R SEP50A-600R STT17A-612R SEP50A-600R STT18A-602R SEP50A-601R STT18A-602R SEP50A-601R NAVSEA CERTIFIED — NON-CORROSIVE REFRIGERANTS (R) PART NO PIPE SIZE (in) V46CJ-2C 1/2 V46CN-2C 3/4 V46CP-2C 1 V46CQ-2C 1-1/4 V46BR-2C 1-1/2 V46CR-2C 1-1/2 V46BS-3C 2 V46CS-3C 2 V46CS-4C 2 V46BT-3C 2-1/2 V46CT-3C 2-1/2 V46CT-4C 2-1/2 INLET AND OUTLET OPENING POINT RANGE PRESSURE ELEMENT STYLE psig (kPa) Sweat Connector 70 to 260 (483 to 1793) 30-in. Capillary with Sweat Connection (Style 34) 4 Hole Navy Flange 70 to 260 (483 to 1793) 30-in. Capillary with Sweat Connection (Style 34) 4 Hole Navy Flange 70 to 260 (483 to 1793) 30-in. Capillary with Sweat Connection (Style 34) 4 Hole Navy Flange 70 to 260 (483 to 1793) 30-in. Capillary with Sweat Connection (Style 34) 4 Hole ASME Flange 70 to 260 (483 to 1793) 30-in. Capillary with Sweat Connection (Style 34) 6 Hole Navy Flange 70 to 260 (483 to 1793) 30-in. Capillary with Sweat Connection (Style 34) 4 Hole ASME Flange 70 to 170 (483 to 1172) 30-in. Capillary with Sweat Connection (Style 34) 6 Hole Navy Flange 70 to 170 (483 to 1172) 30-in. Capillary with Sweat Connection (Style 34) 6 Hole Navy Flange 160 to 260 (1103 to 1793) 30-in. Capillary with Sweat Connection (Style 34) 4 Hole ASME Flange 70 to 170 (483 to 1172) 30-in. Capillary with Sweat Connection (Style 34) 6 Hole Navy Flange 70 to 170 (483 to 1172) 30-in. Capillary with Sweat Connection (Style 34) 6 Hole Navy Flange 150 to 260 (1103 to 1793) 30-in. Capillary with Sweat Connection (Style 34) SEAT REPAIR KIT STT15A-603R REPLACEMENT POWER ELEMENTS SEP13A-600R STT17A-613R SEP13A-603R STT17A-611R SEP50A-600R STT17A-612R SEP50A-600R STT17A-612R SEP50A-600R STT17A-612R SEP50A-600R STT18A-602R SEP50A-601R STT18A-602R SEP50A-601R STT18A-602R SEP50A-601R STT18A-602R SEP50A-601R STT18A-602R SEP50A-601R STT18A-602R SEP50A-601R *Replacement element supplied with ¼” male SAE connector. Order SEC37A capillary kit w/2 flare nuts separately, if needed. **Low water flow valve — 2.5 GPM max. †Maximum opening point: 70 - 300 psi (483 to 2068 kPa), maximum permissible pressure: 440 psi (3034 kPa). NOTES: 1. Use only on valves specified. 2. Standard capillary length: Style 45 & Style 34 elements is 30”. K-326 Heating Components V46BC-2C STT15A-603R Indoor Air Quality 1/2 NPT Thermostats V46BB-2C STT14A-601R REPLACEMENT POWER ELEMENTS SEP13A-602R Oils & Chemicals 3/8 NPT SEAT REPAIR KIT Accessories, Supplies & Commodities V46BA-2C INLET AND OUTLET OPENING POINT RANGE PRESSURE ELEMENT STYLE psig (kPa) Threaded 70 to 260 (483 to 1793) 30-in. Capillary with Sweat Connection (Style 34) Threaded 70 to 260 (483 to 1793) 30-in. Capillary with Sweat Connection (Style 34) Threaded 70 to 260 (483 to 1793) 30-in. Capillary with Sweat Connection (Style 34) Threaded 70 to 260 (483 to 1793) 30-in. Capillary with Sweat Connection (Style 34) Threaded 70 to 260 (483 to 1793) 30-in. Capillary with Sweat Connection (Style 34) 4 Hole ASME Flange 160 to 260 (1103 to 1793) 30-in. Capillary with Sweat Connection (Style 34) 4 Hole ASME Flange 160 to 260 (1103 to 1793) 30-in. Capillary with Sweat Connection (Style 34) Tools & Instruments PIPE SIZE (in) Refrigeration PART NO Electrical MARITIME TYPE — NON-CORROSIVE REFRIGERANTS (R) Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 3 JOHNSON CONTROLS - V46N SERIES REVERSE ACTING VALVE SELECTION CHART DESCRIPTION The V46N Series are reverse acting pressure actuated modulating valves used on either open or closed loop coolant systems. Reverse acting valves open on a refrigerant pressure decrease. They are generally used in parallel with a direct acting valve for heat pump applications or for bypass operation. APPLICATIONS • Bypass systems • Water cooled heat pumps in parallel with direct acting valve SELECTION CHART PART NO PIPE SIZE (in) V46NA-1C 3/8 NPT V46NB-1C 1/2 NPT V46NB-2C 1/2 NPT V46NC-1C 3/4 NPT V46NC-2C 3/4 NPT V46ND-1C 1 NPT V46ND-2C 1 NPT V46NE-1C 1-1/4 NPT V46NE-2C 1-1/4 NPT INLET AND OUTLET OPENING POINT RANGE PRESSURE ELEMENT STYLE psig (kPa) Threaded 90 to 280 (621 to 1931) 30-in. Capillary with 1/4-in.Flare Nut + Schrader Valve Depressor(Style 45) Threaded 90 to 280 (621 to 1931) 30-in. Capillary with 1/4-in.Flare Nut + Schrader Valve Depressor(Style 45) Threaded 40 to 100** (276 too 690) 30-in. Capillary with 1/4-in.Flare Nut + Schrader Valve Depressor(Style 45) Threaded 90 to 280 (621 to 1931) 30-in. Capillary with 1/4-in.Flare Nut + Schrader Valve Depressor(Style 45) Threaded 40 to 100** (276 to 690) 30-in. Capillary with 1/4-in.Flare Nut + Schrader Valve Depressor(Style 45) Threaded 90 to 280 (621 to 1931) 30-in. Capillary with 1/4-in.Flare Nut + Schrader Valve Depressor(Style 45) Threaded 40 to 100** (276 to 690) 30-in. Capillary with 1/4-in.Flare Nut + Schrader Valve Depressor(Style 45) Threaded 90 to 280 (621 to 1931) 30-in. Capillary with 1/4-in.Flare Nut + Schrader Valve Depressor(Style 45) Threaded 40 to 100** (276 to 690) 30-in. Capillary with 1/4-in.Flare Nut + Schrader Valve Depressor(Style 45) Accessories, Supplies & Commodities Tools & Instruments Refrigeration SEAT REPAIR KIT STT14A-600R STT15A-602R STT15A-602R STT16A-601R STT16A-601R STT17A-609R STT17A-609R STT17A-610R STT17A-610R REPLACEMENT POWER ELEMENTS SEP91A-600R & SEC37A-601R* SEP91A-602R & SEC37A-602R* SEP91A-602R & SEC37A-602R* SEP91A-601R & SEC37A-602R* SEP91A-601R & SEC37A-602R* SEP91A-601R & SEC37A-602R* SEP91A-601R & SEC37A-602R* SEP91A-603R & SEC37A-600R* SEP91A-603R & SEC37A-600R* *Maximum bellows overpressure is 320 psig. Replacement element provided with 1/4 in. male SAE connector. Order SEC 37A capillary kit with 2 flare nuts, separately if needed. Use only on valves specified. ** For heat pump application. Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-327 Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 4 JOHNSON CONTROLS - V47 SERIES TEMPERATURE ACTUATED MODULATING VALVE SELECTION CHART Motors DESCRIPTION The V47 is a temperature actuated modulating valve that regulates the flow of water or glycol to maintain a desired temperature. Three Temperature ranges for each valve size are available. Many valves come with a removable bypass plug that can be replaced by the bypass Orifice provided separately with each valve. Valve action is open on temperature increase. For open on temperature decrease models, Contact Application Engineering. Compressors, Chillers, Condensers Refrigeration STD BYPASS ORIFICE DIA (in) REPLACEMENT SENSING ELEMENT V47AA-1C V47AA-2C V47AA-3C V47AB-2C V47AB-3C V47AB-4C V47AB-5C V47AC-3C V47AC4C V47AC-6C V47AC-8C V47AD-1C V47AD-2C V47AD-3C V47AE-1C V47AE-2C V47AE-3C V47AR-1C V47AR-2C V47AR-3C V47AS-1C V47AS-2C V47AS-3C V47AT-1C V47AT-2C V47AT-3C 3/8 3/8 3/8 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4** 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2** 1-1/2** 1-1/2** 2** 2** 2** 2-1/2** 2-1/2** 2-1/2** STT14A-600R STT14A-600R STT14A-600R STT15A-602R STT15A-602R STT15A-602R STT15A-602R STT16A-601R STT16A-601R STT16A-601R STT16A-601R STT17A-609R STT17A-609R STT17A-609R STT17A-610R STT17A-610R STT17A-610R STT17A-610R STT17A-610R STT17A-610R STT18A-600R STT18A-600R STT18A-600R STT18A-601R STT18A-601R STT18A-601R 115 to 180 Heating 160 to 230 Heating 75 to 135 Cross Ambient 75 to 135 Cross Ambient 115 to 180 Heating 160 to 230 Heating 75 to 135 Cross Ambient 115 to 180 Heating 160 to 230 Heating 75 to 135 Cross Ambient 75 to 135 Heating 75 to 135 Cross Ambient 115 to 180 Heating 160 to 230 Heating 75 to 135 Cross Ambient 115 to 180 Heating 160 to 230 Heating 75 to 135 Cross Ambient 115 to 180 Heating 160 to 230 Heating 115 to 160 Heating 160 to 205 Heating 75 to 115 Cross Ambient 15 to 160 Heating 160 to 205 Heating 75 to 115 Cross Ambient 11/16 x 3-1/4 11/16 x 3-1/4 11/16 x 6 11/16 x 10* 11/16 x 3-1/4 11/16 x 3-1/4 11/16 x 10 11/16 x 3-1/4 11/16 x 3-1/4 11/16 x 10 11/16 x 3-1/4 11/16 x 16-1/4 11/16 x 6 11/16 x 6 11/16 x 16-1/4 11/16 x 6 11/16 x 6 11/16 x 16-1/4 11/16 x 6 11/16 x 6 11/16 x 10 11/16 x 10 11/16 x 43 11/16 x 10 11/16 x 10 11/16 x 43 0.062 0.062 0.062 — 0.062 0.062 0.062 0.062 0.062 0.062 — 0.093 0.093 0.093 0.093 0.093 0.093 0.093 0.093 0.093 0.125 0.125 0.125 0.125 0.125 0.125 SET29A-622R SET29A-623R SET29A-601R SET29A-602R SET29A-624R SET29A-625R SET29A-602R SET29A-627R SET29A-627R SET29A-604R SET98A-621R SET29A-605R SET29A-629R SET29A-630R SET29A-605R SET29A-629R SET29A-630R SET29A-605R SET29A-629R SET29A-630R SET29A-632R SET19A-633R SET29A-606R SET29A-632R SET29A-633R SET29A-606R K-328 Refrigeration Tools & Instruments Accessories, Supplies & Commodities *Style 1 bulb (does not include 1/2-in. male NPT fitting). **ASME Flange. BULB WELL NUMBER (Order Separately) WEL18A-602R WEL18A-602R WEL17A-601R WEL17A-600R WEL18A-602R WEL18A-602R WEL17A-600R WEL18A-602R WEL18A-602R WEL17A-600R WEL18A-602R — WEL17A-601R WEL17A-601R — WEL17A-601R WEL17A-601R — WEL17A-601R WEL17A-601R WEL17A-600R WEL17A-600R — WEL17A-600R WEL17A-600R — Heating Components BULB SIZE (in) (Dia Length) Indoor Air Quality RANGE (Opening Point) °F Thermostats SEAT REPAIR KIT Oils & Chemicals PIPE SIZE (in) Electrical SELECTION CHART PART NO Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 5 Motors Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS - V47N SERIES REVERSE ACTING VALVE SELECTION CHART DESCRIPTION The V47N Series are reverse-acting, temperature-actuated, modulating valves that regulate the flow of water or glycol to maintain a desired temperature. Reverse-acting valves open on a drop in temperature. They are generally used in parallel with direct-acting valves for hand pump applications or for bypass operation. APPLICATIONS • Bypass systems • Water-cooled heat pumps in parallel with a direct-acting valve PART NO V47NA-2C V47NA-8C V47NB-1C V47NC-1C V47NR-1C BULB SIZE (in) (Dia Length) PIPE SIZE & CONNECTOR 11/16 x 3-1/4 1-1/4 x 5 11/16 x 3-1/4 11/16 x 3-1/4 11/16 x 16-1/4 OPENING POINT RANGE 3/8-in. Screw 3/8-in. Screw 1/2-9n. Screw 3/4-in. Screw 1-1/2-in. Flange 85 to 155° F 215 to 265° F 85 to 155° F 85 to 155° F 45 to 85° F PARTS FOR: P/N Seat Repair Kit P/N Replacement Sensing Element V47NA-2 V47NA-8 V47NB-1 V47NA-2 V47NA-8 V47NB-1 — — — V47NC-1 V47NC-1 — V47NR-1 V47NR-1 SET29A-605R Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments Refrigeration FACTORY SET OPENING POINT 105° F 240° F 105° F 105° F 55° F STANDARD BYPASS ORIFICE — 0.04 in. — — — REPAIR PARTS AND ACCESSORIES Thermostats Indoor Air Quality Heating Components Electrical SELECTION CHART K-329 P/N Bulb Well Number (Order Separately) WEL18A-601R (Monel) — WEL18A-601R (Monel) WEL18A-602R (Brass) WEL18A-601R (Monel) WEL18A-602R (Brass) — Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 6 JOHNSON CONTROLS - V48 SERIES THREE-WAY WATER REGULATING VALVE DESCRIPTION V48 Series valves are designed specifically for condensing units cooled either by atmospheric or forced draft cooling towers. APPLICATIONS Motors V48 Series valves are used on single or multiple condenser hook-ups to the tower to provide the most economical and efficient use of the tower. SELECTION CHART Threaded V48AC-2C 3/4 Threaded V48AD-1C 1 Threaded V48AD-2C 1 Threaded V48AE-1C 1-1/4 Threaded V48AE-2C 1-1/4 Threaded V48AF-1C 1-1/2 Threaded V48AF-2C 1-1/2 Threaded V48AJ-2C 1/2 Union V48EK-2C 3/4 Union V48AL-2C 1 Union V48AM-2C 1-1/4 Union *Replacement element supplied with 1/4-in male SAE connector, Order SEC37A capacity lot with two nuts separately if needed. Use only on valves specified. 150 psig (1034 kPa) 320 psig(2206 kPa) 150 psig (1034 kPa) 230 psig(1586 kPa) 150 psig (1034 kPa) 320 psig(2206 kPa) 150 psig (1034 kPa) 230 psig(1586 kPa) 150 psig (1034 kPa) 320 psig(2206 kPa) 150 psig (1034 kPa) 230 psig(1586 kPa) 150 psig (1034 kPa) 320 psig(2206 kPa) 150 psig (1034 kPa) 320 psig(2206 kPa) 150 psig (1034 kPa) 370 psig(2551 kPa) 150 psig (1034 kPa) 320 psig(2206 kPa) 150 psig (1034 kPa) 320 psig(2206 kPa) Tools & Instruments NOTE: Standard capacity length on Style 45 and Style 34 elements is 30 inches. 150 psig (1034 kPa) 230 psig(1586 kPa) Electrical 3/4 150 psig (1034 kPa) 320 psig(2206 kPa) Heating Components V48AC-1C 150 psig (1034 kPa) 230 psig(1586 kPa) Indoor Air Quality Threaded MAX BELLOWS OVERPRESSURE Thermostats 1/2 WATER SUPPLY PRESSURE Oils & Chemicals V48AB-2C Threaded PRESSURE ELEMENT SEAT REPAIR KIT REPLACEMENT RANGE OPENING POINT STYLE SENSING OF NORMALLY CLOSED ELEMENT SIDE (psig (kPa) STT15A-605R 85 to 110 (586 to 758) 30-in. Capillary with SEP91A-602R 1/4-in.Flare Nut (Style 45) SEC37A-602R* STT15A-605R 30-in. Capillary with SEP91A-602R 145 to 190 (1000 to 1310) 1/4-in.Flare Nut (Style 45) SEC37A-602R* STT16A-604R 85 to 110 (586 to 758) 30-in. Capillary with SEP91A-602R 1/4-in.Flare Nut (Style 45) SEC37A-602R* STT16A-604R 30-in. Capillary with SEP91A-602R 145 to 190 (1000 to 1310) 1/4-in.Flare Nut (Style 45) SEC37A-602R* STT17A-616R 85 to 110 (586 to 758) 30-in. Capillary with SEP91A-602R 1/4-in.Flare Nut (Style 45) SEC37A-602R* STT17A-616R 30-in. Capillary with SEP91A-602R 145 to 190 (1000 to 1310) 1/4-in.Flare Nut (Style 45) SEC37A-602R* STT17A-617R 85 to 110 (586 to 758) 30-in. Capillary with SEP91A-602R 1/4-in.Flare Nut (Style 45) SEC37A-602R* STT17A-617R 30-in. Capillary with SEP91A-602R 145 to 190 (1000 to 1310) 1/4-in.Flare Nut (Style 45) SEC37A-602R* STT17A-604R SEP81A-602R 85 to 110 (586 to 758) 1/4-in. Male Flare Fitting(Style 5) STT17A-604R SEP81A-601R 145 to 190 (1000 to 1310) 1/4-in. Male Flare Fitting(Style 5) STT15A-605R SEP77A-605R 145 to 190 (1000 to 1310) 30-in. Capillary with 1/4-in.Flare Nut (Style 45) STT16A-604R SEP77A-605R 145 to 190 (1000 to 1310) 30-in. Capillary with 1/4-in.Flare Nut (Style 45) STT17A-616R SEP127A-600R 145 to 190 (1000 to 1310) 30-in. Capillary with 1/4-in.Flare Nut (Style 45) STT17A-617R SEP107A-602R 145 to 190 (1000 to 1310) 30-in. Capillary with 1/4-in.Flare Nut (Style 45) Accessories, Supplies & Commodities INLET AND OUTLET V48AB-1C PIPE SIZE (in) 1/2 K-330 Refrigeration PART NO Compressors, Chillers, Condensers Refrigeration Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 7 JOHNSON CONTROLS - High Water Pressure Two-Way Pressure-Actuated Water-Regulating Valves V146 Series DESCRIPTION The V146 Series 2-Way Pressure-Actuated Water-Regulating Valves are designed to regulate water flow and control refrigerant head pressure in systems with water-cooled condensers. The V146 valves are ideal for applications with system water pressures of up to 350 psi (2413 kPa), such as high-rise buildings. V146 valves may be used with standard non-corrosive refrigerants. V146 valves have a monel (nickel-copper alloy) seat and disc holder. FEATURES • No close-fitting or sliding parts in water passages provides control in less-than ideal water conditions • High-pressure design allows use in systems with up to 350 psi (2413 kPa) water pressure • Pressure-balanced design resists changes to setpoint caused by gradual or sudden water pressure changes • Corrosion-resistant material for internal parts promotes long valve life • Accessible range spring allows easy manual flushing • Take-apart construction allows access to valve interior without removing valve from refrigeration system or pumping down APPLICATIONS V146 valves are designed to regulate flow in systems with water pressures up to 350 psi (2413 kPa). The valves have an adjustable opening point in a refrigerant pressure range of 70-260 psi (483-1793 kPa). V146 valves may be used with standard non-corrosive refrigerants. Internal valve parts that come into contact with water are constructed of monel (nickel-copper alloy) and brass to resist corrosion. SELECTION CHART PART NO Inlet and Outlet Ports Nominal Valve Size V146AL-1C Union(Sweat) 1 in. Accessories, Supplies & Commodities Tools & Instruments 46 V146 Series 2-Way Pressure-Actuated Water-Regulating Valves Nominal Valve Size 1 in. Maximum Refrigerant Pressure at Bellows Opening Point Adjustment Range Factory-Set Opening Point 320 psig (2206 kPa) Maximum Water Pressure 350 psi (2413 kPa) 70-260 psig (483-1793 kPa) 165 psig (1138 kPa) Maximum 170°F (77°C) Temperature Refrigeration Pressure Connection Style SPECIFICATIONS Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Minimum 40°F (4°C) Body 1 in. - Cast Iron with Corrosion-resistant Finish Disc Stud, Valve Stem Brass Disc Cup, Valve Seat Model (Nickel-Copper Alloy) Valve Disc Buna-N Sensing Element Brass and Phosphor Bronze Bellow in Brass Cup Diaphragm Nylon Reinforced Buna-N Material V146 Valve Dimensions, inches (Millimeters) and Shipping Weight, pounds (kilograms) Valve Code Number V146AL-1C Callout Nominal Valve Size A B C D E Shipping Weight 1 in. 4-3/4 (121) 2-3/4 (71) 10 (254) 5-5/16 (151) 4-1/16 (103) 9.3 (4.0) K-331 Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 8 V148 Valve Dimensions, inches (millimeters), and Shipping Weight, pounds (kilograms) Valve Code Number V148AL-1C Nominal Valve Size 1in. Callout A 4-3/4 (121) B 2-3/4 (71) C 12 (305) D 5-15/16 (151) K-332 E 2 (51) F 4-1/16 (103) Shipping Weight 12 (5.4) Motors Accessories, Supplies & Commodities Tools & Instruments V148 Series 3-Way Pressure-Actuated Water-Regulating Valves Nominal Valve Size 1 in. Maximum Refrigerant Pressure at Bellows 320 psi (2206 kPa) Opening Point 145-190 psi (1000-1310 kPa) Adjustment Range Factory-Set Opening 165 psi (1138 kPa) Point Port 1 to Port 2) Throttling Range 70 psi (483 kPa) Maximum Pressure 350 psi (2413 kPa) Minimum Temperature 40°F (4°C) Maximum 170°F (77°C) Temperature Body 1 in. - Cast Iron with Corrosion-resistant Finish Disc Stud, Valve Stem Brass Disc Cup, Valve Seat Monel (Nickel-Copper Alloy) Valve Disc Buna-N Sensing Element Brass Bellows in Brass Cup Material Diaphragm Nylon-Reinforced Buna-N Refrigeration SPECIFICATIONS Oils & Chemicals Thermostats Indoor Air Quality DESCRIPTION V148 Series 3-Way Pressure-Actuated Water-Regulating Valves are designed to regulate water flow and control refrigerant head pressure in systems with single or multiple water-cooled condensers. The V148 valves are ideal for applications with system water pressures of up to 350 psi (2413 kPa), such as highrise buildings. V148 valves may be used with standard non-corrosive refrigerants. V148 valves have a monel (nickel-copper alloy) seat and disc holder. FEATURES APPLICATIONS • No close-fitting or sliding parts in water passages V148 valves regulate water flow to water provides control in less-than ideal water conditions cooled condensers (and may be applied to • High-pressure design allows use in systems with hydronic systems) with water pressures up to up to 350 psi (2413 kPa) water pressure 350 psi (2413 kPa). The V148 valves have an • Pressure-balanced design resists changes to setpoint adjustable opening point in a refrigerant caused by gradual or sudden water pressure changes pressure range of 145-190 psi (1000-1310 • Corrosion-resistant material for internal parts promotes kPa). V148 valves may be used with standard long valve life non-corrosive refrigerants. Internal valve parts • Accessible range spring allows easy manual flushing that come into contact with water are • Take-apart construction allows access to valve interior constructed of monel (nickel copper alloy) without removing valve from refrigeration system or and brass to resist corrosion. pumping down Electrical V148 Series Heating Components JOHNSON CONTROLS - High Water Pressure 3-Way Pressure-Actuated Water-Regulating Valves Compressors, Chillers, Condensers Refrigeration Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 9 Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration JOHNSON CONTROLS - Transformers Y63, Y64, Y65, Y66 and Y69 Series DESCRIPTION: The series Y63, Y64, Y65, Y66, and Y69 transformers handle 24 VAC power requirements from 40 VA through 300 VA. These transformers are designed for use with digital controllers, gas controls, ignition systems, motor actuators, staging controls, and most other 24 VAC Heating, Ventilating, Air Conditioning (HVAC) and Refrigeration control systems. The Y6x Series meets the national requirements of the United States and Canada. The Y63, Y64, Y65, and Y66 transformers are Underwriters Laboratories Inc. (UL) listed as Class 2 transformers (UL 1585, CSA C22.2 No. 66). The Y69 is listed as a general-purpose transformer (UL 506, CSA C22.2 No. 66). FEATURES: • Split-bobbin design provides best primary/secondary isolation. • Mutate primaries reduce stocking requirements and offer application flexibility. • Choice of plate, foot, or conduit hub mounting provides mounting flexibility. • Choice of primary voltages meets a wide range of power requirements from 24 VAC through 480 VAC. • Color-coded lead wires for simplicity and standardization. • Built-in circuit breakers allow for easy reset, and avoid the replacement cost after a burnout (Y63, Y64, Y66, and Y69) To Order Specify the code number from the following selection chart. Input Power Requirements Full Load Secondary Voltage Open Circuit Secondary Voltage (No Load) Full Load Secondary VA Rating Finish Ambient Operating Temperature Ambient Storage Temperature Shipping Weight Agency Compliance Y63, Y64, Y65, Y66, Y69 SERIES TRANSFORMERS 24-480 VAC at 60 Hz 23.5 VAC (Nominal) 27.0 VAC (Nominal) Series Volt-Amperes Y63 50 VA Y64 92 VA 40 VA Y65 Y66 75 VA Y69 300 VA Endbells, frame, feet, and mounting plates are zinc plated. -40 to 104°F (-40 to 40°C) -40 to 140°F (-40 to 60°C) Y63 3.0 lb/1.4 kg Y64 4.0 lb/1.8 kg Y65 2.0 lb/0.9 kg Y66 3.0 lb/1.4 kg Y69 11.0 lb/5.0 kg UL Listed Y63, Y64, Y65, Y66; File E25482 or E95575, CCN's XOKV (US) and XOKV7 (Canada) UL Recognized Y63, Y64, Y65, Y66; File E25482 or E95575, CCN's XOKV2 (US) and XOKV8 (Canada) UL Listed Y69; File E37177 or E95138, CCN's XPTQ (US) and XPTQ7 (Canada) All transformers are Class 2 except the Y69 (300 VA), which is listed as a power transformer. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Specifications: K-333 Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 10 Voltage VAC Y65G13-0 Y65A13-0 Y65A21-0 Y65T31-0 Y65T42-0 Y65T54-0 Y65S13-0 Y65F13-0 Y65F42-0 24 120 120 120/208/240 120/208/240 120/208/240 208/240 277/480 277/480 Male Fitting 8 in. prim. leads Male Fitting 8 in. prim. leads Endbell holes 8 in. prim. leads Male Fitting 8 in. prim. leads Male Fitting 8 in. prim. leads 8 in. primary leads Male Fitting 8 in. prim. leads Male Fitting 8 in. prim. leads Male Fitting 8 in. prim. leads 24 24 24 24 24 24 24 24 24 MOUNTING Male Fitting 30 in. sec. leads Foot Male Fitting 30 in. sec. leads Foot Three screw terminals (one is blind) 4 in. x 4 in. plate Three screw terminals (one is blind) Foot 4 in. x 4 in. plate (a) Male Fitting 8 in. sec. leads Hub 4 in. x 4 in. plate (a) 8 in. secondary leads Foot-skeleton Male Fitting 30 in. sec. leads Foot Male Fitting 30 in. sec. leads Foot Male Fitting 8 in. sec. leads Hub 4 in. x 4 in. plate (a) 50 VA Capacity Transformers with Circuit Breakers Primary PART NO Agency Requirement Voltage VAC Connection Voltage VAC Y63T22-0 Y63T31-0 Y63F22-0 120/208/240 120/208/240 277/480 End Bell Hole 8 in. prim. leads Male Fitting 8 in. prim. leads End Bell Hole 8 in. prim. leads 24 24 24 UL, cUL Class 2 UL, cUL Class 2 UL, cUL Class 2 Secondary Connection MOUNTING End Bell Hole 8 in. sec. leads 4 in. x 4 in. plate Three screw terminals (one is blind) Foot 4 in. x 4 in. plate (a) End Bell Hole 8 in. sec. leads 4 in. x 4 in. plate 75 VA Capacity Transformers with Circuit Breakers Primary PART NO Agency Requirement Voltage VAC Connection Voltage VAC Y66T12-0 Y66T13-0 Y66F12-0 Y66F13-0 120/208/240 120/208/240 277/480 277/480 Male Fitting 8 in. prim. leads Male Fitting 8 in. prim. leads Male Fitting 8 in. prim. leads Male Fitting 8 in. prim. leads 24 24 24 24 UL, cUL Class 2 UL, cUL Class 2 UL, cUL Class 2 UL, cUL Class 2 Secondary Connection Male Fitting 30 in. sec. leads Male Fitting 30 in. sec. leads Male Fitting 8 in. sec. leads Male Fitting 30 in. sec. leads MOUNTING Foot Foot Foot Foot 92 VA Capacity Transformers with Circuit Breakers Primary PART NO Agency Requirement Voltage VAC Connection Voltage VAC Y64T15-0 Y64T21-0 Y64T22-0 120/208/240 120/208/240 120/208/240 Male Fitting 8 in. prim. leads Endbell holes 8 in. prim. leads End Bell Hole 8 in. prim. leads 24 24 24 UL, cUL Class 2 UL, cUL Class 2 UL, cUL Class 2 Secondary Connection Female Fitting 30 in. sec. leads Three screw terminals (one is blind) End Bell Hole 8 in. sec. leads MOUNTING Foot Plate Plate 300 VA Capacity Transformers with Circuit Breakers Primary PART NO Agency Requirement Voltage VAC Connection Voltage VAC Y69T15-0 120/208/240 Male Fitting 8 in. prim. leads 24 cULus Power Trans Female Fitting 30 in. sec. leads MOUNTING Foot Tools & Instruments (a) 4 in. x 4 in. plate and nut packed with transformer Secondary Connection K-334 Refrigeration UL, cUL Class 2 UL, cUL Class 2 UL, cUL Class 2 UL, cUL Class 2 UL, cUL Class 2 UL, cUL Class 2 UL, cUL Class 2 UL, cUL Class 2 UL, cUL Class 2 Secondary Connection Motors Connection Electrical Voltage VAC Accessories, Supplies & Commodities Primary PART NO Agency Requirement Heating Components 40 VA Capacity Transformers with Energy Limiting Type Overload Protection Indoor Air Quality Selection Chart Thermostats Y63, Y64, Y65, Y66 and Y69 Series Transformers (Continued) Oils & Chemicals JOHNSON CONTROLS - Transformers Compressors, Chillers, Condensers Refrigeration Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 11 JOHNSON CONTROLS - F59 SERIES SUMP PUMP SWITCH SELECTION CHART DESCRIPTION The F59 Series controls are designed to start an electric motor on liquid level rise and stop th motor on liquid level drop. The control cuts in when upper weight is submerged approximately halfway, and cuts out when lower weight is approximately half-exposed. Each switch includes 36 in. cable and (2) two weights. FEATURES F59D-5 is equipped with a power cord and a piggyback style plug. The male prongs plug into the wall outlet, and the sump pump cord plugs into the female end of the plug. APPLICATIONS On/Off control of sump pumps. SELECTION CHART PART NO MOUNTING CONTACT ACTION RANGE ADJUSTER F59A-1C F59A-2C* External mounting bracket External mounting — includes universal mounting bracket and 24 in. strap for quick, easy mounting on the motor, on the pedestal or on the discharge pipe. External mounting — includes clamp for mounting on the pedestal or on the discharge pipe. External mounting bracket DPST DPST Drop cord wiring Drop cord wiring SPST 8 ft power cord with 3-prong piggyback plug DPST Conduit Wiring — 7/8-in. conduit openings in case. F59D-5C* F59H-1C *Universal Replacement JOHNSON CONTROLS - DPC (a) Relay is not field-replaceable (b) Replaces Ranco P30-5826 (c) Switch differential is approximately 5 psi (34 kpa). Time delay relay energizes at: 9 psi (61 kpa) pressure difference, de-energizes at: 14 psi (97 kpa) difference. (d) Replaces Ranco P30-5827. (e) Replaces Ranco P30-5827(includes alarm wire). (f) Replaces Carlyle/Carrier part no. HKA-600, 6342060 (g) Switch differential is approximately 4.5 psi (34 kpa). Time delay relay energizes at: 6.5 psi (45 kpa) pressure difference de-energizes at: 11 psi (76 kpa) difference. (h) Replaces Carlyle/Carrier part no. HKA-600.6342060 with 36” SEC99A Ultracap (i) Replaces Carlyle/Carrier part no. HKA-600.6342060 with 36” SEC99A Ultracap (includes alarm wire). Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-335 Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 12 • Available in 1/4” thru 5/8” flare sizes and 1/4” thru 7/8” solder sizes. • Recognized under the component program of Underwriters Laboratories for use in the USA and Canada. • Maximum working pressure: 500 PSIG. • Maximum temperature rating at +200° F. Flare to Flare PART NO A 15620 A 15621 A 15622 A 15623 SIZE Flare A 1/4 3/8 1/2 5/8 B 2-3/16 2-13/32 3 3-5/16 C 13/16 Hex 13/16 Hex 1-1/4 Oct 1-1/4 Oct WT/ EA .14 .18 .44 .52 PART NO A 15628 A 15629 A 15630 A 15631 SIZE OD A 1/4 3/8 1/2 5/8 B 1-3/16 1-5/32 1-7/16 1-7/16 C 13/16 Hex 13/16 Hex 1-1/4 Oct 1-1/4 Oct WT/ EA .13 .13 .36 .37 Motors MUELLER - CHECK VALVES TECHNICAL DATA Compressors, Chillers, Condensers Refrigeration SIZE OD A 1/4 3/8 1/2 5/8 B 4-7/16 4-9/16 4-29/32 5-13/64 C 13/16 Hex 13/16 Hex 1-1/4 Oct 1-1/4 Oct WT/ EA .17 .17 .42 .48 Heating Components PART NO A 15632 A 15633 A 15634 A 15635 Indoor Air Quality SOLDER TO SOLDER EXTENDED ENDS Electrical SOLDER TO SOLDER Thermostats MUELLER - FOUR-BOLT CHECK VALVES Specifications Recommended Bolt Torques Oils & Chemicals Accessories, Supplies & Commodities Pressure Required to Open All fluorinated types 500 psig 2500 psig -40° F/300° F <1 psi B 34235 <1 psi B 34236 2 psi B 34237 2 psi B 34238 2 psi B 34239 2 psi B 34240 2 psi B 34241 8-15 ft-lb B 34235 8-15 ft-lb B 34236 10-20 ft-lb B 34237 10-20 ft-lb B 34238 10-20 ft-lb B 34239 15-25 ft-lb B 34240 15-25 ft-lb B 34241 PART NO B 34235 B 34236 B 34237 B 34238 B 34239 B 34240 B 34241 SIZE 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8 3-1/8 A 3-19/32 3-19/32 4-9/16 4-9/16 5-7/8 8 8 B 3-11/16 3-11/16 4-3/4 4-3/4 6-3/8 8-7/8 8-7/8 C 31/32 31/32 1-5/16 1-5/16 1-11/16 2 2 D 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8 3-1/8 K-336 E 15/16 1 1-1/16 1-1/16 1-1/2 1-7/8 1-7/8 Cv 5.05 6.70 8.71 10.06 36 70 * Weight 2.46 2.31 5.42 5.04 12.6 * * Tools & Instruments NOTE: Not to be installed with the bonnet facing down. *Consult Factory. Refrigeration Refrigerants Maximum Working Pressure Burst Pressure Working Temperature Range Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 13 Electrical Motors Compressors, Chillers, Condensers Refrigeration MUELLER - CYCLEMASTER BALL VALVES Specifications PART NO A 17859* A 17860* A 17861* A 17862* A 17863 A 17864 A 17865 A 17866 A 17867 A 17868 A 17869 A 17870 A 17871* A 17872* SIZE 1/4 3/8 1/2 5/8 3/4 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8 3-1/8 2-5/8 3-1/8 A (in) B (in) C (in) 5-7/16 2-15/16 5/16 5-1/2 3 5/16 6-3/8 3-7/16 3/8 6-3/8 3-7/16 1/2 7-7/16 3-7/8 5/8 7-7/16 3-7/8 3/4 8-7/16 4-5/16 7/8 10 5 1 11 5-1/2 1-1/8 12 6 1-3/8 13-1/2 6-13/16 1-1/2 16 8 1-3/8 12 6 1-3/8 12 6 1-11/16 D (in) 7/8 7/8 7/8 7/8 1-1/4 1-1/4 1-9/16 1-1/2 1-11/16 2-1/8 *** 3 2-1/8 2-1/8 E (in) 2-3/4 2-3/4 2-3/4 2-3/4 3-1/2 3-1/2 3-13/16 4-3/16 4-7/8 5-9/16 *** 7-3/8 5-5/8 5-5/8 F** (in) G**(mm) H** NA 14 M4 x .07 15/16 14 M4 x .07 1-3/16 14 M4 x .07 1-3/8 14 M4 x .07 1-1/2 20 M4 x .07 1-5/8 20 M4 x .07 1-3/4 25 M4 x .07 2-1/16 30 M6 x 1.0 2-1/4 34 M6 x 1.0 2-7/16 34 M6 x 1.0 *** 34 M6 x 1.0 3-1/8 34 M6 x 1.0 2-3/8 34 M6 x 1.0 3-1/16 34 M6 x 1.0 SEAL CAP KIT**** A 17842 A 17842 A 17842 A 17842 A 17843 A 17843 A 17844 A 17844 A 17845 A 17845 A 17846 A 17846 A 17845 A 17845 Cv 1.02 4.29 6.20 11.20 18.95 29.30 59.55 84.58 225.04 291.59 423.47 *** 184.85 127.99 Weight .70 .63 .62 .64 1.15 1.53 2.92 3.48 5.02 8.60 14.00 23.50 9.20 11.00 Refrigerants HFC, CFC, HCFC Maximum Working Pressure 700 psig Working Temperature Range -40° F/300° F CYCLEMASTER Mueller 3-Way Ball Valves with Access Ports Prefixed for Ball Valve Options: A = Standard AC = Standard with access AP = Drilled & tapped APM = Drilled & tapped with 1 piece seal cap AQ = Drilled & tapped with access AQM = Drilled & tapped with access & 1 piece seal cap AU = 3-way with access Examples: A 17865: 1-1/8” without access AC17865: 1-1/8” with access AP17865: 1-1/8” drilled & tapped APM17865: 1-1/8” drilled & tapped with 1 piece seal cap AQ17865: 1-1/8” drilled & tapped with access AQM17865: 1-1/8” drilled & tapped with access & 1 piece seal cap AU17865: 1-1/8” 3-way with access * Reduced port **Where Applicable ***Consult factory for details ****Seal Cap Kit includes Seal Cap, Seal Cap Gasket, Anti-Friction Ring, Cap Nut. . Sizes not available in “Standard, A” or “ Standard with Access, AC” options substitute “AP” for “A” and “AQ” for “AC”. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Technical Data PART NO AU17860 AU17861 AU17862 AU17863 AU17864 AU17865 A 17545 A 17546 AU17868 AU17871 AU17872 SIZE 3/8 1/2 5/8 3/4 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8 3-1/8 A (in) 4-7/8 5-3/8 5-3/8 6-1/4 5-31/32 6-39/64 8-1/16 8-7/8 9-5/16 9-1/16 8-11/16 B (in) 2-21/32 3-3/64 2-59/64 3-57/64 3-5/32 3-3/16 4-7/64 4-7/16 4-39/64 4-15/32 4-9/32 C (in) 2-19/64 2-43/64 2-35/64 3 2-29/32 3-7/64 3-61/64 4-23/64 4-23/32 4-19/32 4-11/32 D (in) 3-21/32 4-7/32 4-7/64 5-1/4 4-7/8 5-31/64 6-57/64 7-33/64 8-13/32 8-9/32 8-3/32 E (in) F** (in) 5/16 1/2 3/8 1/2 1/2 1/2 5/8 3/4 3/4 3/4 29/32 1 31/32 1-1/4 1-3/32 1-1/2 1-11/32 2 1-15/32 2 1-21/32 2 K-337 G**(mm) 41/64 53/64 27/32 55/64 27/32 53/64 1-5/64 1-5/32 1-5/64 1-1/64 1-27/64 Cv 2.23 3.94 4.63 11.90 10.89 19.33 31.06 44.69 76.32 69.85 58.19 Weight .67 .70 .70 NA 1.44 2.76 4.97 7.17 13.80 14.66 15.48 Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 14 Refrigeration Compressors, Chillers, Condensers MUELLER - CYCLEMASTER ACTUATED BALL VALVES SPECIFICATIONS PART NO SIZE A B C D AW17861 AW17862 AW17863 AW17864 AW17865 AW17866 AW17867 AW17868 AW17871 AW17872 1/2 5/8 3/4 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8 3-1/8 4.05 4.05 4.36 4.36 4.89 5.12 5.84 6.50 6.50 6.50 3.71 3.71 3.71 3.71 5.75 5.75 5.75 8.25 8.25 8.25 NA NA NA NA .65 .65 .65 .67 .67 .67 2.69 2.69 2.69 2.69 3.18 3.18 3.18 3.93 3.93 3.93 Prefixed for Actuator Options: Indoor Air Quality AWS = Straight actuated ball valve with auxiliary switch AYS = 3-way actuated ball valve with auxiliary switch AS = 3-way actuated ball valve with auxiliary switch BS = Actuator kit with auxiliary switch Warnings: * Reduced Port MUELLER - CYCLEMASTER ACTUATED BALL VALVES3-WAY PART NO AY17861 AY17862 AY17863 AY17864 AY17865 A 17810 A 17811 AY 17868 AY 17871 AY 17872 SIZE 1/2 5/8 3/4 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8 3-1/8 A 4.05 4.05 4.36 4.36 4.89 5.70 6.19 6.50 6.50 6.50 B 3.71 3.71 3.71 3.71 5.75 5.75 5.75 8.25 8.25 8.25 C NA NA NA NA .65 .65 .65 .67 .67 .67 D 2.69 2.69 2.69 2.69 3.18 3.18 3.18 3.93 3.93 3.93 Acutated 3 Way Kits B 34437 B 34437 B 34438 B 34438 B 34439 B 34440 B 34441 B 34442 B 34442 B 34442 K-338 ACTUATED BALL VALVES ACCESSORIES PART NO Accessories For Use with Actuator P 36532 Housing Series II P 36533 Heater Series II P 36534 Heated Housing Series II P 36535 Housing Series III P 36536 Heater Series III P 36537 Heated Housing Series III Oils & Chemicals Accessories, Supplies & Commodities Nominal Hot Gas Capacity Tons R12 R134a R404a R410a 3.72 2.97 2.86 4.34 6.73 5.38 5.16 7.85 11.38 9.08 8.73 13.27 17.59 14.04 13.49 20.52 33.96 27.10 26.04 39.61 50.79 40.53 38.95 59.24 135.13 107.83 103..62 157.62 175.09 139.72 134.26 204.24 111.00 88.57 85.12 129.47 76.86 61.33 58.93 89.65 Tools & Instruments Cv 6.20 11.20 18.95 29.30 56.55 84.58 225.04 291.59 184.85 127.99 Suction Vapor Capacity Tons R12 R134a R404a R410a 2.00 1.47 1.57 2.36 3.61 2.65 2.83 4.27 6.10 4.49 4.78 7.22 9.44 6.94 7.40 11.17 18.22 13.40 14.27 21.55 27.24 20.04 21.35 32.23 72.49 53.33 56.80 85.75 93.93 69.10 73.59 111.11 59.24 43.80 46.65 70.44 41.23 30.33 32.30 48.77 Refrigeration Size 1/2 5/8 3/4 7/8 1-1/8 1-3/8 1-5/8 2-1/8 2-5/8* 3-1/8* Nominal Liquid Capacity Tons R12 R134a R404a R410a 20.13 18.25 12.62 19.62 36.36 32.97 22.80 35.44 61.52 55.78 38.57 59.96 95.11 86.24 59.64 92.70 183.57 166.45 115.10 178.92 274.56 248.95 172.15 267.61 730.53 662.37 458.03 712.02 946.45 858.25 593.48 922.58 600.06 544.08 376.23 584.86 415.48 376.72 260.50 404.96 Thermostats Motors not for use in wet or condensing applications. Heater assembly required in low temperature applications. Conditions: Tonnage calculations are based on the following conditions; Evaporator temperature = 10°F Vapor temperature exiting evaporator = 10°F superheated Liquid temperature entering evaporator = 100°F Hot gas temperature = 140°F Pressure drop across valve = 1 psi Straight Heating Components STRAIGHT Electrical Motors TECHNICAL DATA Actuator Series I Series II Series III Sizes 1/2 -7/8 1-1/8 -1-5/8 2-1/8 -3-1/8 Torque (in.-lb) 44 132 310 Power Supply (VAC) 24 24 24 Power Consumption (W ) 2.3 3 7 Running Time (seconds) 90 125 125 Ambient Temperature (°F) –22 to 130 –22 to 130 –22 to 130 Ball Valve Refrigerants All Fluorinated Types Maximum W orking Pressure (psig) 700 psig W orking Temperature Range (°F) -40 to 300° F Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 15 MUELLER - PACKED LINE VALVES TECHNICAL DATA • Non-back seating service valves • Forged brass body with integral mounting bracket • Plated steel stem suitable for refrigerants and other industrial fluids non-corrosive to brass and steel • Asbestos-free packing material • UL Recognized • Maximum temperature rating at +300° F Angle Backseating - NPTFE Inlet to Flare Refrigeration COUNTERBORE DIMENSION (F*) Dia Depth SIZE PART NO NPTFE A Flare B C D E A 13220 A 13183 1/2 1/2 1/2 5/8 1-13/16 1-13/16 1-5/16 1-1/2 4-1/8 4-11/16 .504 .504 WT/ EA MWP .53 .64 500 500 WT/ EA MWP .51 .61 1.27 500 500 700 3/8 3/8 Angle Backseating - NPTFE Inlet to Solder COUNTERBORE DIMENSION (F*) Dia Depth SIZE PART NO NPTFE A B C D E A 13977 A 13978 A 13979 1/2 1/2 3/4 1/2 5/8 7/8 1-13/16 1-13/16 2-3/32 1 1 1 4-3/32 4-11/16 6 .504 .504 .754 3/8 3/8 5/8 Angle Backseating - Solder to Solder PART NO A B C D E WT/ EA MWP A 17506 B 32080 5/8 7/8 5/8 7/8 29/32 2-9/32 1 1-3/4 3-3/4 6-13/64 .66 .99 500 700 Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-339 Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 16 Replacement Caps Cap Material A 04566 A 04597 P-34627 Steel Brass Plastic Two Way - Flare to Flare SIZE A B C D WT/ EA MWP A 13591 A 13595 A 13592 1/4 3/8 1/2 3-13/32 3-13/32 3-13/32 1 1-1/8 1-1/4 29/32 29/32 15/16 1-13/32 1-13/32 1-7/16 .50 .55 .56 500 500 500 Electrical PART NO *Copper gasket included Two Way - Solder to Solder SIZE A B C D WT/ EA MWP A 15580 A 15581 A 15582 1/4 3/8 1/2 3-13/32 3-13/32 3-13/32 3/4 15/16 7/8 15/16 29/32 29/32 1-7/16 1-13/32 1-13/32 .49 .51 .52 500 500 500 PART NO MPT A A 11031 A 11030 A 13613 A 13503 A 11042 Flare B FPT B A B C D E 1/4 3/8 1/4 3/8 1/2 ------ ------ ------ 1 1-1/16 1-1/8 1-1/8 1-3/8 15/16 1-1/8 1-1/16 1-1/8 1-3/8 3-3/64 3-3/32 3-3/16 3-3/32 3-3/4 1/4 1/4 3/8 3/8 3/8 COUNTERBORE DIMENSION (F*) Dia Depth .254 .317 .379 .379 .379 5/16 3/8 3/8 5/16 3/8 WT/ EA MWP .26 .31 .31 .33 .51 700 700 700 700 700 * Machined to accept O.D. size tube as indicated. † Recognized under the component program of UL for use in the USA & Canada. Angle Non-Backseating - Flare to NPTFE PART NO Flare A MPT B C D E COUNTERBORE DIMENSION (F*) Dia Depth A 15073 1/4 1/4 15/16 1 3 .254 SIZE K-340 3/8 WT/ EA MWP 27 700 Accessories, Supplies & Commodities SIZE Tools & Instruments Angle Non-Backseating - NPTFE Inlet to Flare† Refrigeration *Copper gasket included Oils & Chemicals Thermostats Indoor Air Quality PART NO Heating Components PART NO Motors MUELLER - PACKED LINE VALVES Compressors, Chillers, Condensers Refrigeration Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 17 MUELLER - PACKED LINE VALVES Angle Non-Backseating - Internal Swivel Flare to Flare One soft copper gasket included with each assembly. Motors Compressors, Chillers, Condensers Refrigeration PART NO INTERNAL FLARE A B A 17429 A 17474 1/4 3/8 1/4 3/8 C D E WT/ EA MWP 1-15/32 1-1/2 1-1/16 1-1/8 3-29/32 3-9/16 .33 .27 700 700 Angle Non-Backseating - Solder To Flare With Seal Cap PART NO SOLDER A FLARE B A 17502 A 17503 1/4* 3/8** 1/4 3/8 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical *Copper gasket included *Also 3/8 FTG. C D E 23/32 1-1/32 2-3/4 11/16 1-1/2 2-23/32 **Also 1/2 FTG. F WT/ EA MWP 3/8 1/2 .58 .49 700 700 ***Copper gasket included Transducer Valve PART NO A B C D E F G B 33837 B 34254 B 34287 B 35162 B 35334 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2 1 1 1 1 1 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1/8 NPTFI 1/8 NPTFI 1/4 NPTFI 1/8 NPTFI 1/4 NPTFI 1/4 NPTFE 1/4 NPTFE 1/4 NPTFE 3/8 ODS 1/4 NPTFE 1/4 Flare Access 1/4 Flare Access 1/4 Flare Access 1/4 Flare Access 1/4 Flare Access Valve Core Loosely STEM CAP installed Assembled MATERIAL No No Steel No No Brass No No Plastic No No Steel Yes Yes Plastic MWP 700 700 700 700 700 Angle Non-Backseating PART NO MPT A Size Flare B FPT B C D A 11030 A 11031 A 11042 A 13502 A 13503 A 13613 B 32222 1/4 1/4 3/8 1/4 NPTFE 3/5 3/8 1/4 NPTFI 3/8 1/4 1/2 1/4 NPTFI 3/8 1/4 1/4 NPTFE 1/4 - 1-1/16 1 1-3/8 1-3/8 1-1/8 1-1/8 1-1/4 1-1/8 15/16 1-3/8 1 1/16 1-1/8 1-1/16 1-1/8 *Machined to accept O.D. size tube as indicated. K-341 Size Counterbone Dimensions(F*) E 3-3/32 3-3/64 3-3/4 3 25/32 3-5/32 3-3/16 3-43/64 MWP 700 700 700 700 700 700 500 Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 18 Refrigeration Compressors, Chillers, Condensers MUELLER - PACKLESS DIAPHRAGM VALVES SPECIFICATIONS TECHNICAL DATA All fluorinated types Motors Straight Thru - Flare to Flare - Type I - Class IV D 1-5/16 1-3/8 1-5/8 1-11/16 1-3/8 1-27/64 1-27/32 1-15/16 5/8 5/8 27/32 27/32 WT/ EA .75 .76 1.25 1.27 Straight Thru - Solder to Solder - Type I - Class II PART NO A 14838 A 14840 A 14841 A 14842 SIZE OPEN A 2-11/16 2-11/16 3-1/2 3-1/2 1/4 3/8 1/2 5/8 B C D 1-1/32 1-1/32 1-5/16 1-13/64 1-3/32 1-3/32 1-9/16 1-7/16 5/8 5/8 27/32 27/32 B C D 2-21/36 2-13/16 3-1/32 3-7/64 2-23/32 2-7/8 3-11/32 3-11/32 5/8 5/8 27/32 27/32 WT/ EA .72 .71 1.22 1.22 Extended End - Solder to Solder - Type I - Class II PART NO SIZE A-14848 A-14850 A-14851 A-14852 1/4 3/8 1/2 5/8 OPEN A 2-11/16 2-11/16 3-1/2 3-1/2 WT/ EA .75 .76 1.28 1.34 Angle - NPTFE to Flare - Type I SIZE PART NO MPT Flare A 15525 A 15526 A 15527 A 15528 A 15529 A 15530 A 15531 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/4 3/8 1/4 3/8 1/2 1/2 5/8 OPEN A 2-13/16 2-13/16 2-7/8 2-7/8 3-9/16 3-11/16 3-11/16 B C 1-19/64 1-27/64 1-19/64 1-27/64 1-27/32 1-27/32 1-15/16 1-3/64 1-3/64 1-5/64 1-5/64 1-19/64 1-7/16 1-7/16 WT/ EA .61 .63 .62 .64 1.06 1.06 1.08 Angle - Solder to Solder - Type I - Class I SIZE PART NO OD O-D A 15539 A 15540 A 15541 A 15542 1/4 3/8 1/2 5/8 1/4 3/8 1/2 5/8 K-342 OPEN A 2-17/32 2-17/32 3-5/16 3-13/64 B C 1-3/32 1-3/32 1-3/16 5/16 3/4 3/4 1-1/16 15/16 WT/ EA .69 .71 1.14 1.14 Electrical C Heating Components 1/4 3/8 1/2 5/8 B Indoor Air Quality OPEN A 2-11/16 2-11/16 3-15/32 3-15/32 Thermostats A 14833 A 14835 A 14836 A 14837 SIZE Oils & Chemicals PART NO Accessories, Supplies & Commodities Burst Pressure -40° F/+300° F 500 psig with flow in the direction of the arrow on the body 350 psig with flow against the direction of the arrow 2500 psig Tools & Instruments W orking Temperature Range Maximum Working Pressure Refrigeration Refrigerants Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 19 MUELLER - System Protection Devices Pressure Relief Valves Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Mueller pressure relief valves are designed primarily for use on liquid receiver applications, above the liquid Refrigerant level, and it is recommended that the factory be consulted before the valves are used on other applications. These valves are designed to operate according to ASHRAE Standard 15, they should be applied According to this safety code. Application information can also be found in the ASHRAE Guide and Data Book. How to select a relief valve: (a) Determine the minimum discharge capacity required. (b) Determine pressure setting. This relief setting cannot exceed the design pressure of the liquid receiver. However, the relief valve setting should be at least 25% higher than the maximum system operating pressure. (c) Determine the size connection required. (d) Select valve from chart below. Discharge Capacity The minimum required discharge capacity of the pressure relief device or fusible plug for each pressure vessel is Determined by the following formula, specified by the ASHRAE Standard 15, Safety Code for Mechanical Refrigeration: C = kfDL where: C = minimum required discharge capacity of the relief device, lb. air/min (kg air/min) D = outside diameter of vessel, ft (m) L = length of the vessel, ft (m) k = factor dependent on units used (k = 1 for l-P units, k = 4.88 for Sl units) f = factor dependent on the kind of refrigerant from the chart below DISCHARGE CAPACITY A PSIG Prefix 235 300 350 400 425 450 AD AE AG AH AI AJ lb air/ min 4.3 5.4 6.3 7.1 7.6 8.0 B kg air/ min 2.0 2.4 2.9 3.2 3.4 3.6 lb air/ min 9.1 11.5 13.3 15.2 16.1 17.0 C kg air/ min 4.1 5.2 6.0 6.9 7.3 7.7 lb air/ min 20.1 25.4 29.5 33.5 35.6 37.6 D kg air/ min 9.1 11.5 13.4 15.2 16.1 17.1 lb air/ min 33.7 42.5 49.3 56.1 59.5 62.9 E kg air/ min 15.3 19.3 22.4 25.4 27.0 28.5 lb air/ min 55.9 70.5 81.8 93.0 98.6 104.3 F kg air/ min 25.4 32.0 37.1 42.2 44.7 47.3 lb air/ min 91.8 115.8 134.3 152.7 162.0 171.2 Type of Refrigerant Value of ƒ When used on the lowside of a limited-charge cascade system (Value in parentheses is metric) R-23, R-170, R-744, R-1150, R-508, R-508B R-13, R-13B1, R-503 R-14 Other Applications: R-718 R-717 R-11, R-32, R-113, R-123, R-142b ,R-152a, R-290, R-600, R-600a, R-764 R-12, R-22, R-114, R-124, R-134a, R-410A, R-104B, R-401C, R-405A, R-406A, R-407C, R-407D, R-407E, R-409A, R-409B, R-411A, R-411B, R-411C, R-412A, R-414A, R-414B, R-500, R-1270 R-143a, R-402B, R-403A, R-407A, R-408A, R-413A R-115, R-402A, R-403B, R-404A, R-407B, R-410A, R-410B, R-502, R-507A, R-509A K-343 1.0(0.082) 2.0(0.163) 2.5(0.203) 0.2(0.016) 0.5(0.041) 1.0(0.082) 1.6(0.131) 2.0(0.163) 2.5(0.203) kg air/ min 41.6 52.5 60.9 69.3 73.5 77.7 Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 20 C ASME VALVE A 15501 A 15502 A 15503 A 15504 B 33752 B 33753 WT/ EA INLET (A) (in) OUTLET (B) (in) (in) (cm) 1⁄4 3⁄8 3⁄8 1⁄2 1⁄4 1⁄4 3⁄8 3⁄8 1⁄2 5⁄8 3⁄8 1⁄2 2-21/32 2-13/16 3 4-3/16 2-13/16 3 6.75 7.14 7.62 10.64 7.14 7.62 DISCHARGE TABLE A B B C B B (lb) (kg) 0.19 0.33 0.36 0.84 0.32 NA 0.09 0.15 0.16 0.38 0.14 NA Angle - NPTFE to Flare C ASME VALVE B 33746 B 33754 A 15512 A 15513 A 15514 INLET (A) (in) OUTLET (B) (in) 1⁄4 1⁄4 3⁄8 3⁄8 1⁄2 3⁄8 1⁄2 3⁄8 1⁄2 5⁄8 (in) D (cm) 2-3/8 6.03 2-7/16 6.19 2-3/8 6.03 2-3/8 6.03 4-3/32 10.40 (in) (cm) 1-1/8 1-5/16 1-3/8 1-11/32 1-9/16 2.86 3.33 3.49 3.41 3.97 WT/ EA (lb) (kg) DISCHARGE TABLE B B B B C 0.30 NA 0.36 0.38 0.98 0.14 NA 0.16 0.17 0.45 Motors Straight Thru - NPTFE Inlet to Flare Electrical Pressure Relief Valves Heating Components MUELLER - System Protection Devices Compressors, Chillers, Condensers Refrigeration B (in) (in) (cm) 1⁄8 1⁄4 3⁄8 1⁄4 1-7/8 2 2-1/8 2-1/8 3⁄4 3⁄4 1 1 1.91 1.91 2.54 2.54 INLET (A) (in) OUTLET (B) (in) (in) (cm) 1 1-1/4 3⁄4 1 1-1/4 3⁄4 4-9/16 5 5 11.59 12.70 12.70 INLET (A) (in) OUTLET (B) (in) (in) (cm) 7⁄8 -14 UNF 2A 1-5/16 -12UNF2A 1-5/8 -12UNF-2A 3⁄4 1 1-1/4 5 4-3/8 5 12.70 11.11 12.70 DISCHARGE TABLE A A B B (lb) (kg) 0.12 0.13 0.24 NA 0.05 0.06 0.11 NA Straight Thru - NPTFE Inlet to NPTFI Outlet (kg) 1.95 2.00 1.49 0.88 0.91 0.68 Straight Thru-Straight Thread Inlet to NPTFI Outlet C ASME VALVE B 34444 B 34519 B 34580 WT/ EA DISCHARGE TABLE D E F Prefixes for standard settings are: AD/BD= 235 psig. AH/BH = 400 psig. AE/BE = 300 psig. AI/BI = 425 psig. AG/BG = 350 psig. AJ/BJ = 450 psig. For valves furnished at non-standard settings, use part numbers as listed in specification charts and indicate exact pressure setting. K-344 (lb) (kg) 1.53 1.37 2.00 0.69 0.62 0.91 Oils & Chemicals (lb) Accessories, Supplies & Commodities A 17840 A 17834 A 15506 WT/ EA DISCHARGE TABLE E F D Tools & Instruments C ASME VALVE Refrigeration A 15508 A 15509 A 17430 B 33755 WT/ EA INLET (A) (in) Thermostats C ASME VALVE Indoor Air Quality Atmospheric - NPTFE Inlet Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 21 MUELLER - ANGLE ISOLATION VALVES SPECIFICATIONS B34413 PART NO. TECHNICAL DATA BBB-34412 B-35224 B-34594 B-34418 B-34416 34595 34417 TORQUES TO SEAL (ft-lb) 22-40 22-40 22-40 22-40 16-18 22-40 22-40 25-45 25-45 25-45 25-45 16-18 25-45 25-45 15-25 15-25 15-25 15-25 8-12 15-25 15-25 8-10 15-25 15-25 15-25 8-10 8-10 15-25 NA NA NA NA 40-50 60-80 60-80 Finger Tight 40-50 40-50 Finger Tight B-34415 B34414 22-40 25-45 15-25 15-25 60-80 40-50 22-40 25-45 15-25 15-25 80-100 40-50 Front Seat Back Seat Pack Gland Flare Seal Cap Rotolock Nut Seal Cap Maximum Working Pressure (psig) 16-18 16-18 8-12 8-10 NA 500 500 500 500 500 500 500 500 500 500 Burst Pressure (psig) Working Temperature Range (°F) 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 -40/300 -40/300 -40/300 -40/300 -40/300 -40/300 -40/300 -40/300 -40/300 Refrigerants -40/300 All Fluorinated Types Solder X Solder Angle Isolation Valve PART NO B 34413 B 34412 B 35224 B 34594 B 34595 B 34479 SIZE SIZE Flare A B C D E F Cv 5/8 ODS x 5/8 ODS 7/8 ODS x 7/8 ODS 1-1/8 ODS x 1-1/8 ODS 1-3/8 ODS x 1-3/8 ODS 1-5/8 ODS x 1-5/8 ODS 1-1/8 ODS x 1-3/8 ODS 1/4 1/4 3/8 3/8 1/4 1/4 5-27/64 6-9/16 7-19/32 9-31/64 10-3/64 7-19/32 2-21/32 3-3/32 3-63/64 4-3/16 4-11/16 3-3/4 27/32 29/32 1-5/16 1-1/2 1-3/4 1-1/4 1-11/64 1-17/64 1-1/2 1-29/32 2-3/16 1-1/2 1/2 3/4 15/16 1 1-3/32 1 1/2 3/4 15/16 1 1-3/32 15/16 6 15 25 38 53 -- Solder X Rotolock Angle Isolation Valve Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration PART NO B 34418 B 34417 B 34416 B 34415 B 34414 SIZE SIZE Flare A B C D E F G Cv 5/8 ODS x 1 THD 7/8 ODS x 1-1/4 THD 1-1/8 ODS x 1-1/2 THD 1-3/8 ODS x 1-3/4 THD 1-5/8 ODS x 2-1/4 THD 1/4 1/4 3/8 3/8 3/8 5-27/64 6-9/16 7-19/32 9-33/64 10-3/64 2-1/4 2-31/64 3 3-17/64 3-35/64 35/64 3/4 1 1-1/4 1-1/2 15/16 1-3/64 1-1/4 1-13/32 1-9/16 35/64 3/4 1 1-1/4 1-1/2 11/64 1-17/64 1-35/64 1-29/32 2-3/16 1/2 3/4 15/16 1 1-3/32 6 15 25 38 53 K-345 Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 22 Refrigeration Electrical Motors Compressors, Chillers, Condensers MUELLER - CHANGEOVER MANIFOLD SPECIFICATIONS 34550 B 35271 A 17923 A 17924 B 34559 B 34654 B 35272 B 35273 Torque to seal: Front seat (ft.-lbs) 16-18 22-40 Back seat (ft.-lbs) 16-18 25-45 Pack Gland (ft.-lbs.) 8-12 Finger Tight 500 psig. 2500 psig. Working Temperature Range o All Fluorinated Type INLET OUTLETS 1/2 NPTFE 1/2 NPTFI 3/4 NPTFE 3/4 NPTFI 1 NPTFE 1 NPTFI 1-1/4 NPTFE 1-1/4 NPTFE 7/8-14 UNF 2A 7/8-14 UNF 2B 1-5/16-12 UNF 2A 1-5/16-12 UNF 2B 1-5/8-12 UNF 2A 1-5/8-12 UNF 2B 1 NPTFI 1 NPTFI 1-1/4 NPTFI 1-1/4 NPTFI 3/4 NPTFI 3/4 NPTFI A (in) B (in) C (in) D (in) E (in) F (in) 6 6 8-11/16 8-7/8 6 8-9/16 8-9/16 11-13/32 11-13/32 7-23/32 1-3/4 1-3/4 2-7/16 2-7/16 1-3/4 2-7/16 2-7/16 5-13/32 5-13/32 3-17/32 1-3/4 1-7/8 2-3/8 2-7/16 1-5/8 2-1/8 2-1/8 1-15/16 1-15/16 1-11/16 1-3/8 1-3/8 1-7/8 2-1/8 1-3/8 1-3/4 1-13/16 1-31/32 1-31/32 1-11/16 2-1/16 2-1/16 3-1/8 3-1/8 2-1/16 3-1/8 3-1/8 1-7/8 1-7/8 3-5/8 3/4 3/4 1-7/16 1-7/16 3/4 1-7/16 1-7/16 1-7/16 1-7/16 3/4 Tools & Instruments A 17921 A 17922 A 17923 A 17924 B 34550 B 34559 B 34654 B 35272 B 35273 B 35271 Thermostats -40/+300 F Refrigerants PART NO Indoor Air Quality 15-25 Seal cap Maximum working pressure Burst Pressure Oils & Chemicals A 17922 Accessories, Supplies & Commodities A17921 K-346 Refrigeration Manifold Heating Components TECHNICAL DATA Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 23 MUELLER - COMPRESSOR VALVES & KITS THE INDUSTRY STANDARD Mueller’s compressor valves demonstrate a backseating design, constructed so that the stem forms a seal against a seat whether the stem is full forward or backward. This design allows complete isolation of service when the valve is either fully open or fully closed. In the intermediate position, specialized packing allows gauge and charging port caps and plugs to be accessed without refrigerants loss. Cross reference information is provided to assist in the selection process for all major compressor manufacturers in the industry. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration Copeland No. Kit Copeland No. Kit 998-0510-04 A 17510 998-0510-14 A 17517 998-0510-05 A 17511 998-0510-15 A 17518 998-0510-06 A 17512 998-0510-16 A 17519 998-0510-07 A 17513 998-0510-17 A 17520 998-0510-09 A 17525 998-0510-18 A 17521 998-0510-10 A 17527 998-0510-19 A 17522 998-0510-11 A 17526 998-0510-20 A 17523 998-0510-12 A 17515 998-0510-21 A 17524 998-0510-13 A 17516 ADVANTAGES: • • • • • Complete service kit including valve body, mounting bolts, cap, and gaskets. Compatible with all new refrigerants and oils. 700 psig maximum working pressure All valves 100% tested. Recognized under component program of underwriters laboratories for use in the USA and Canada. BRASS COMPRESSOR VALVES Double Port - 45º Flare Type - Steel Cap PART NO A 16302 A 16303 A 16304 Kit A C D E F BOLT CENTERS DIA BOLT HOLES PIPE PLUG SIZE A 17518 A 17519 A 17520 3⁄8 1⁄2 5⁄8 1-3/4 1-7/8 2 4-7/16 4-11/16 4-13/16 9⁄16 9⁄16 9⁄16 5⁄8 5⁄8 5⁄8 1-5/8 1-5/8 1-5/8 11⁄32 11⁄32 11⁄32 1⁄8 1⁄8 1⁄8 K-347 FLANGE THICKNESS 7⁄8 7⁄8 7⁄8 Valve Wt 1.20 1.17 1.23 Kit Wt 1.24 1.20 1.27 Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 24 Refrigeration Compressors, Chillers, Condensers MUELLER - COMPRESSOR VALVES & KITS BRASS COMPRESSOR VALVES Kit A 16307 A 16308 A 16309 A 17510 A 17511 A 17512 A B C D 3⁄8 5⁄16 1-1/4 4-5/64 1⁄2 3⁄8 1-13/32 4-13/64 5⁄8 1⁄2 1-1/2 4-1/2 E F BOLT CENTERS DIA BOLT HOLES PIPE PLUG SIZE 9⁄16 9⁄16 9⁄16 5⁄8 5⁄8 5⁄8 1-5/8 1-5/8 1-5/8 11⁄32 11⁄32 11⁄32 1⁄8 1⁄8 1⁄8 FLANGE THICKNESS 7⁄8 7⁄8 7⁄8 Valve Wt 0.69 0.86 0.88 Kit Wt 0.73 0.89 0.92 Kit A B C D E F A 16310 A 16311 A 16317 B 32197 A 15500 A 16312 B 33367 A 17517 A 17515 A 17528 A 17529 -A 17516 A 17530 3⁄4 7⁄8 7⁄8 7⁄8 1-1/8 1-1/8 1-1/8 5⁄8 3⁄4 3⁄4 3⁄4 29⁄32 29⁄32 29⁄32 1-29/32 1-31/32 1-31/32 1-31/32 2-1/16 2-1/16 2-17/64 6-9/16 6-9/16 6-1/2 6-9/16 6-9/16 6-9/16 6-9/16 13⁄16 13⁄16 13⁄16 13⁄16 13⁄16 13⁄16 1-1/8 7⁄8 7⁄8 7⁄8 7⁄8 7⁄8 7⁄8 7⁄8 BOLT CENTERS DIA BOLT HOLES PIPE PLUG SIZE FLANGE THICKNESS Valve Wt 1-5/8 1-5/8 1-5/8 1-3/4 1-5/8 1-5/8 1-3/4 11⁄32 11⁄32 11⁄32 11⁄32 11⁄32 11⁄32 11⁄32 1⁄8 1⁄8 1⁄8 1⁄8 1⁄8 1⁄8 1⁄4 1-21/64 1-21/64 1-21/64 1-21/64 1-21/64 1-21/64 1-21/64 1.64 1.63 1.63 1.42 1.66 1.66 -- Kit Wt 1.69 1.67 1.68 1.69 -1.71 -- A 16313 A 16314 A 16315 A 16316 Kit A B C D E F -3⁄4 5⁄8 2-5/16 7-11/32 1-1/4 1-1/4 A 17527 7⁄8 3⁄4 2-5/16 7-11/32 1-1/4 1-1/4 A 17525 1-1/8 29⁄32 2-15/32 7-1/2 1-1/4 1-1/4 A 17526 1-3/8 31⁄32 2-15/32 7-1/2 1-1/4 1-1/4 BOLT CENTERS 2-3/4 2-3/4 2-3/4 2-3/4 DIA BOLT HOLES 17⁄32 17⁄32 17⁄32 17⁄32 K-348 PIPE PLUG SIZE 1⁄8 1⁄8 1⁄8 1⁄8 Flange Bolt Centers 1-5/8 1-5/8 1-5/8 1-5/8 FLANGE THICKNESS 1 1 1 1 Valve Wt 3.93 3.90 3.88 3.66 Kit Wt -4.05 4.03 3.80 Refrigeration PART NO Tools & Instruments Accessories, Supplies & Commodities Flange Union - Solder Type - Brass Cap Oils & Chemicals PART NO Thermostats Indoor Air Quality Straight Port - Solder Type - Plastic Cap Heating Components PART NO Electrical Motors Double Port - Solder Type - Steel Cap Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 25 Motors Compressors, Chillers, Condensers Refrigeration MUELLER - COMPRESSOR VALVES & KITS BRASS COMPRESSOR VALVES Straight Port - 45° Flare Type - Plastic Cap PART NO A C D E F BOLT CENTERS DIA BOLT HOLES PIPE PLUG SIZE FLANGE THICKNESS A 13166 3⁄4 2-3/8 7 13⁄16 7⁄8 1-5/8 11⁄32 1⁄8 1-1/4 Valve Wt 1-7/8 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical 4-Bolt Mounting Style - Solder Type - Flat Gasket Surface - Plastic Cap PART NO B 32807 B 32808 B 32930 Kit A A 17532 A 17533 A 17534 B C 1-1/8 29⁄32 1-3/8 31⁄32 1-5/8 1-3/32 D E F 2-23/32 7-5/8 1-9/16 1 2-23/32 7-5/8 1-9/16 1 2-7/8 7-5/8 1-9/16 1-1/32 BOLT CENTERS DIA BOLT HOLES PIPE PLUG SIZE Valve Wt 2-1/2 2-1/2 2-1/2 17⁄32 17⁄32 17⁄32 1⁄4 1⁄4 1⁄4 3.88 3.66 3.90 Kit Wt 4.03 3.80 4.05 CAST IRON COMPRESSOR VALVES 4-Bolt - Cast Iron Compressor Valves PART NO B 33813 A 15246 A 16321 A 16367 A 16496 B 32337 B 33770 B 33842 B 33784 A 15586 A 16324 A 16493 B 33572 B 34429 B 34671 A 15587 A 16366 B 33568 B 34314 B 34582 B 34661 A 15588 A 16365 B 33569 A 17496 B 33788 B 34315 B 34670 A 15589 Kit A B C D E F --A 17513 A 17524 -----A 17535 A 17523 -----A 17522 -----A 17521 ------- 1-3/8 1-5/8 1-5/8 1-5/8 1-5/8 1-5/8 1-5/8 1-5/8 2 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8 3-1/8 3-1/8 3-1/8 3-5/8 3-5/8 3-5/8 3-5/8 4-1/8 31⁄32 1-3/32 1-3/32 1-3/32 1-3/32 1-3/32 1-3/32 1-3/32 1-9/32 1-5/16 1-5/16 1-5/16 1-5/16 1-5/16 1-5/16 1-9/32 1-15/32 1-9/32 1-15/32 1-17/64 1-15/32 1-7/32 1-7/32 1-7/32 2-1/16 2-1/16 2-1/16 2-1/16 1-31/32 4-13/32 3-61/64 4-19/32 5-1/4 3-61/64 3-61/64 4-19/32 5-1/4 5-1/64 5-1/16 5-1/16 5-1/16 5-1/16 5-1/16 5-1/16 5-1/64 6-1/2 5-1/64 6-1/2 5-3/64 6-1/2 5-15/16 5-15/16 5-15/16 7 7 7 7 7-7/32 9-29/32 9-15/32 10-3/64 11-29/32 9-15/32 9-15/32 10-1/64 11-29/32 11-55/64 11-61/64 11-61/64 11-61/64 11-61/64 11-61/64 11-61/64 12-1/16 15-1/8 11-29/32 15-1/8 11-29/32 15-1/8 14-39/64 14-39/64 14-39/64 16-19/64 16-19/64 16-19/64 16-19/64 17-1/2 2-1/8 2-1/8 2-1/8 2-17/32 2-1/8 2-1/8 2-1/8 2-17/32 2-17/32 2-17/32 2-17/32 2-17/32 2-17/32 2-17/32 2-33/64 2-17/32 3-11/32 2-17/32 3 11⁄32 2-17/32 3-11/32 3-11/32 3-11/32 3-11/32 3-7/8 3-7/8 3-7/8 3-7/8 4-3/8 2-3/4 2-3/4 2-3/4 3-7/32 2-3/4 2-3/4 2-3/4 3-7/32 3-7/32 3-7/32 3-7/32 3-7/32 3-7/32 3-7/32 3-7/32 3-7/32 4-5/32 3-7/32 4-5/32 3-7/32 4-5/32 4-5/32 4-5/32 4-5/32 4-35/64 4-35/64 4-35/64 4-9/64 5-1/8 BOLT CENTERS 2-1/2 2-1/2 2-1/2 3-1/16 2-1/2 2-1/2 2-1/2 3-1/16 3-1/16 3-1/16 3-1/16 3-1/16 3-1/16 3-1/16 3-1/16 3-1/16 3-7/8 3-1/16 3-7/8 3-1/16 3-7/8 3-7/8 3-7/8 3-7/8 4-1/4 4-1/4 4-1/4 4-1/4 4-3/16 K-349 DIA BOLT HOLES 17⁄32 17⁄32 17⁄32 11⁄16 17⁄32 17⁄32 17⁄32 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 13⁄16 PIPE PLUG SIZE 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 Flange Bolt Centers 2-1/8 2-1/8 2-1/8 3-1/16 2-1/8 2-1/8 2-1/8 3-1/16 3-1/16 3-1/16 3-1/16 3-1/16 3-1/16 3-1/16 3-1/16 3-1/16 3-7/8 3-1/16 3-7/8 3-1/16 3-7/8 3-7/8 3-7/8 3-7/8 4-1/4 4-1/4 4-1/4 4-1/4 4-13/16 Seal Cap Material Valve Wt Cast Iron 9.43 Valox 9.37 Valox 8.72 Valox 18.20 Valox 8.74 Valox 9.07 Cast Iron 8.46 Cast Iron 18.97 Valox 16.42 Valox 18.28 Valox 18.28 Valox 17.71 Valox 17.49 Valox 17.28 Valox 17.28 Valox 20.30 Cast Iron 33.18 Valox 20.23 Cast Iron 30.80 Valox -Cast Iron 30.80 Cast Iron 33.22 Cast Iron 33.22 Cast Iron 32.38 Cast Iron 34.01 Cast Iron 34.01 Cast Iron 40.51 Cast Iron 40.51 Cast Iron 49.80 Kit Wt --8.92 18.61 -----6.69 18.69 -----3.73 -----33.77 ------- Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 26 Compressors, Chillers, Condensers Refrigeration MUELLER - COMPRESSOR VALVES & KITS CAST IRON COMPRESSOR VALVES Motors 4-Bolt - Cast Iron Compressor Valves Without Flange D E F BOLT CENTERS DIA BOLT HOLES PIPE PLUG SIZE Flange Bolt Centers Seal Cap Material B 33793 B 33794 B 34183 B 34497 B 34498 B 34715 B 34761 B 34929** B 35049 3-9/32 3-25/32 2-11/16 3-63/64 3-9/32 3-25/32 3-9/32 4-9/16 3-9/32 10-11/64 12-7/16 8-3/32 13-1/4 10-1/8 13 10-11/64 14-53/64 10-1/8 2-17/32 3-11/32 2-1/8 3-7/8 2-17/32 3-11/32 2-17/32 4-3/8 2-17/32 3-7/32 4-5/32 2-3/4 4-35/64 3-7/32 4-5/32 3-1/32 5-1/8 3-7/32 3-1/16 3-7/8 2-1/2 4-1/4 3-1/16 3-7/8 3-1/16 4-13/16 3-1/16 11⁄16 11⁄16 17⁄32 11⁄16 11⁄16 11⁄16 11⁄16 13⁄16 11⁄16 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 1⁄4 3-1/16 3-7/8 2-1/8 4-1/4 3-1/16 3-7/8 3-1/16 4-13/16 3-1/16 Valox Cast Iron Valox Cast Iron Valox Steel Valox Cast Iron Valox Valve Wt 12.58 22.05 6.91 34.00 17.28 22.05 13.00 37.00 12.97 ** Does not include coupling and bolts D E F BOLT CENTERS DIA BOLT HOLES B 34987* B 34988* 2-5/8 3-5/8 1-15/32 2-1/16 6-1/2 7 12 35⁄64 13 39⁄64 3-11/32 3-7/8 4-5/32 4-9/16 3-7/8 4-1/4 11⁄16 11⁄16 PIPE PLUG SIZE Flange Bolt Centers Valve Wt 1⁄4 1⁄4 3-7/8 4-1/4 28.50 33.50 * Does not include Seat and Stem Ammonia Valves PART NO C D E F BOLT CENTERS DIA BOLT HOLES Flange Bolt Centers Seal Cap Material B 35308 B 35358 3-9/32 3-25/32 10-11/64 12-7/16 2-17/32 3-11/32 3-7/32 4-5/32 3-1/16 3-7/8 11⁄16 11⁄16 3-1/16 3-1/16 Valox Cast Iron K-350 Valve Wt 13.02 22.05 Oils & Chemicals C Accessories, Supplies & Commodities B Tools & Instruments A Refrigeration PART NO Thermostats Indoor Air Quality 4-Bolt - Cast Iron Flanges Electrical C Heating Components PART NO Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 27 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration MUELLER - COMPRESSOR VALVES & KITS CAST IRON COMPRESSOR VALVES Ammonia Valves Torques To Seal (ft. - lbs.) PART NO A 13166 A 15085 A 15246 A 15500 A 15586 A 15587 A 15588 A 15589 A 16302 A 16303 A 16304 A 16307 A 16308 A 16309 A 16310 A 16311 A 16312 A 16313 A 16314 A 16315 A 16316 A 16317 A 16321 A 16324 A 16365 A 16366 A 16367 A 16493 A 16496 A 17496 B 32197 B 32337 B 32807 B 32808 B 32930 B 33367 B 33568 B 33569 B 33572 B 33770 B 33771 B 33784 B 33788 B 33793 B 33794 B 33813 B 33842 B 34183 B 34314 B 34315 B 34429 B 34497 B 34498 B 34582 B 34661 B 34670 B 34671 B 34715 B 34929 B 34987 B 34988 B 35049 B 35308 B 35358 Front Seat Back Seat Pack Gland Pipe Plug Plastic Cap Brass Cap Steel Cap Cast Iron 25 - 45 45 - 65 25 - 45 45 - 65 45 - 65 45 - 65 15 - 25 25 - 35 15 - 25 35 - 45 35 - 45 55 - 70 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight 40 - 50 NA NA NA NA NA NA NA NA NA NA NA NA NA NA Hand Tight Hand Tight Hand Tight 22 - 40 45 - 65 22 - 40 45 - 65 45 - 65 45 - 70 Max 70 14 - 18 14 - 18 14 - 18 14 - 18 14 - 18 14 - 18 22 - 40 22 - 40 22 - 40 30 - 40 30 - 40 30 - 40 30 - 40 22 - 40 45 - 65 45 - 65 45 - 70 45 - 70 45 - 65 45 - 65 45 - 65 Max 70 22 - 40 45 - 65 22 - 40 22 - 40 22 - 40 22 - 40 45 - 65 45 - 70 45 - 65 45 - 65 45 - 65 45 - 65 50 - 70 45 - 65 Max 70 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 50 - 70 45 - 65 45 - 65 45 - 65 485 - 65 45 - 65 Max 70 50 - 70 14 - 18 14 - 18 14 - 18 14 - 18 14 - 18 14 - 18 25 - 45 25 - 45 25 - 45 22 - 45 22 - 45 22 - 45 22 - 45 25 - 45 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 8 -12 8 -12 8 -12 8 -12 8 -12 8 -12 15 - 25 15 - 25 15 - 25 15 - 25 15 - 25 15 - 25 15 - 25 15 - 25 25 - 35 35 - 45 55 - 70 55 - 70 35 - 45 35 - 45 25 - 35 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed NA NA NA NA NA NA Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight 20 - 30 20 - 30 20 - 30 20 - 30 20 - 30 20 - 30 NA NA NA 40 - 50 40 - 50 40 - 50 40 - 50 NA NA NA NA NA NA NA NA 3-5 3-5 3-5 3-5 3-5 3-5 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight 25 - 45 45 - 65 25 - 45 25 - 45 25 - 45 25 - 45 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 50 - 65 45 - 65 Max 65 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 50 - 65 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 Max 65 50 - 65 15 - 25 25 - 35 10 - 15 10 - 15 10 - 15 15 - 25 35 - 45 55 - 70 35 - 45 25 - 35 35 - 45 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 45 - 65 Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight NA Hand Tight NA Hand Tight Hand Tight Hand Tight NA NA Hand Tight NA Hand Tight Hand Tight NA NA Hand Tight NA NA NA NA Hand Tight Hand Tight Hand Tight 40 - 50 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA Hand Tight NA Hand Tight NA NA NA Hand Tight Hand Tight NA Hand Tight NA NA Hand Tight Hand Tight NA Hand Tight NA NA NA NA NA NA NA Hand Tight Hand Tight Hand Tight Hand Tight NA Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight Hand Tight NA NA NA NA NA 35 - 45 25 - 35 2 - 3 Threads Exposed 2 - 3 Threads Exposed 2 - 3 Threads Exposed K-351 Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 28 Fusible Connectors — Half Union — Flare to NPTFE Listed by Underwriters Laboratories, Inc., for use in the USA and Canada C D 1-1/4 1-5/16 1-7/16 1-1/4 1-5/16 1-7/16 1-1/4 1-5/16 1-7/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 3/16 1/4 1/4 3/16 1/4 1/4 3/16 1/4 1/4 Melting Temp* (°F) Per Ctn 283 283 283 210 210 210 168 168 168 WT/ EA 10 10 10 10 10 10 10 10 10 .07 .09 .12 .06 .09 .12 .06 .09 .13 Electrical B 3/16 3/16 9/32 3/16 3/16 9/32 3/16 3/16 9/32 Fusible Pipe Plugs Listed by Underwriters Laboratories, Inc., for use in the USA and Canada PART NO Part- No Size NPTFE Size Hex A B FP-A-* FP-B-* FP-C-* FP-A-* FP-B-* FP-C-* FP-A-* FP-B-* FP-C-* A 14058 A 14059 A 14060 A 14017 A 14018 A 14021 A 15214 A 14019 A 14022 1/8 1/4 3/8 1/8 1/4 3/8 1/8 1/4 3/8 7/16 9/16 11/16 7/16 9/16 11/16 7/16 9/16 11/16 7/32 1/4 3/8 7/32 1/4 3/8 7/32 1/4 3/8 19/32 25/32 27/32 19/32 25/32 27/32 19/32 25/32 27/32 Melting Temp* (°F) 283 283 283 210 210 210 168 168 168 Pcs, Per Ctn WT/ EA 10 15 15 10 15 15 10 15 15 .02 .05 .08 .03 .05 .06 .02 .04 .06 *Melting Temperature Equivalents — 283° F (139° C), 210° F (99° C), 168° F (76 ° C).ex) FP-A-283 PARAGON® - COMMERCIAL REFRIGERATION DEFROST CONTROLS 8040 SERIES • Frequency of defrost initiation is adjustable from 1-6 cycles per day. Minimum of 4 hours between successive operations. • Duration of defrost cycle is adjustable from 4-110 minutes in 2 minute increments. • Accuracy of defrost duration ± 2 minutes. • Choice of 4 contact arrangements for electric heat, hot gas or compressor shutdown defrost. • Positive switch action slider bar. • Heavy duty synchronous motor. • Heavy steel enclosure. Grey finish. Knockouts on bottom, back and sides. Hasp and staple for padlock. Available on bracket for sub-panel mounting. PART NO 8041-00 8041-20 8045-00 8045-20 8047-00 8047-20 AC LINE 60 HZ VOLTS 2-4 SWITCH ARRANGEMENT CONTACTS 1-3 3-N ADJ LENGTH OF DEFROST 120 208-240 120 208-240 120 208-240 Closed Closed Closed Closed Open Open Open Open Open Open Open Open Closed Closed None None Closed Closed 4-110 Min. 4-110 Min. 4-110 Min. 4-110 Min. 4-110 Min. 4-110 Min. K-352 Heating Components A 9/16 11/16 11/16 9/16 11/16 11/16 9/16 11/16 11/16 Indoor Air Quality Size Hex 1/4 3/8 3/8 1/4 3/8 3/8 1/4 3/8 3/8 Thermostats 1/4 1/4 3/8 1/4 1/4 3/8 1/4 1/4 3/8 Oils & Chemicals SIZE Flare Size NPTFE Accessories, Supplies & Commodities A 14062 A 14063 A 14064 A 14023 A 14025 A 14026 A 14024 A 14050 A 14027 Tools & Instruments Part- No FU-4B-* FU-4C-* FU-6C-* FU-4B-* FU-4C-* FU-6C-* FU-4B-* FU-4C-* FU-6C-* Refrigeration PART NO Motors MUELLER - FUSIBLE CONNECTORS Compressors, Chillers, Condensers Refrigeration Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 29 PARAGON® - COMMERCIAL REFRIGERATION DEFROST CONTROLS 8140 SERIES • Frequency of defrost is 1-6 cycles per day. Minimum of 4 hours between successive defrost cycles. • Adjustable back-up defrost termination from 4-110 minutes in 2 minute increments. • Control works with an external temperature or pressure sensor. • Choice of 3 contact arrangements for electric heat, compressor shutdown defrost or hot gas defrost. • Positive switch action slider bar. • Heavy duty synchronous industrial type motor. • Heavy steel enclosure. Grey finish. Knockouts on bottom, back and sides. Hasp and staple for padlock. Available on bracket for sub-panel mounting. PART NO Thermostats 120 208-240 120 208-240 120 208-240 Closed Closed Open Open None None Closed Closed Open Open Closed Closed • Frequency of defrost is 1-6 cycles per day. Minimum of 4 hours between successive defrost cycles. • Adjustable back-up defrost termination from 4-110 minutes in 2 minute increments. • Choice of 3 contact arrangements for electric heat, compressor shutdown defrost or hot gas defrost. • Positive switch action slider bar. • Heavy duty synchronous industrial type motor. • Heavy steel enclosure. Grey finish. Knockouts on top. Available on bracket for sub-panel mounting. • Time Initiated, Pressure Terminated, 40 Amp PART NO 8245-00 8245-20 8247-20 UPC NO79046 AC LINE 60 HZ VOLTS 00580 00590 00610 120 208-240 208-240 NORMAL POSITION OF CONTACTS DURING REFRIGERATION CYCLE CONTACT N-3 CONTACT 1-3 CONTACT 2-4 Closed Closed Open Tools & Instruments Refrigeration Open Open Closed Closed Open Open 8240 SERIES Accessories, Supplies & Commodities Oils & Chemicals NORMAL POSITION OF CONTACTS DURING REFRIGERATION CYCLE CONTACT N-3 CONTACT 1-3 CONTACT 2-4 AC LINE 60 HZ VOLTS 8141-00 8141-20 8143-00 8143-20 8145-00 8145-20 Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-353 Open Open Open None None Closed Sec#10h Refridge 30pages_Fridge 12/10/2010 4:01 PM Page 30 145 Terminal Data* C Terminal A B D E F Relay SPDT SPDT SPDT SPST SPST L2/N Contact NC Contact NO Contact COMM Contact NO Contact COMM Contact Power in to timer Relay 15A resistive @ 120 VAC to 240 VAC G Defrost Termination Device Input Motors Electrical GENERAL INFORMATION Input power 120/208–240 VAC 60 Hz (+10, -15%) Power consumption 6VA max, Defrost termination switch (terminal "G") input impedance to terminal C: 85kȍ +/- 5% Operating voltage 102 VAC min to 132 VAC max @ 60 Hz 176.8 VAC min to 264 VAC max @ 60Hz NOTE: No user-required adjustments to switch between the high and low voltage. Ambient operating conditions -40°F to 131°F (-40°C to 55°C); 0 to 95% RH (non condensing) Storage temperature -40°F to 140°F (-40°C to 60°C) Outside dimensions Individual unit 4.40"W x 7.82"H x 3.80"D Individual unit (in shipping box) 4.75"W x 8.875"H x 4.75"D Individual case shipping weight 3.2 lbs Agency approvals c-UR-us Recognized Component – Models 9045-00M & 9145-00M c-UR-us Listed Product – Models 9045-00 & 9145-00 Heating Components 9145-9045 SERIES - MULTI-VOLTAGE 120/208-240 VAC Indoor Air Quality PARAGON® - UNIVERSAL DEFROST TIMER Compressors, Chillers, Condensers Refrigeration L2/N side Compressor (Typical) (Optional) Thermostats Connections L1 Power to timer and to Defrost Termination Device Compressor Defrost (Typical) Termination Fan (Optional) Switch * 9145 is a general purpose defrost timer & can be used for both Time Initiate/Time Terminate & Time Initiate/Temperature, Pressure Terminate 9045 Terminal Data C Terminal A B D E F Relay SPST #1 SPST #1 L1 SPST #2 SPST #2 L2/N Contact NC Contact COMM Contact Power in to timer NO Contact COMM Contact Power in to timer Relay 30A resistive @ 120VAC to 240 VAC Rating 1HP @ 120 VAC, Device Connections 2HP @208 VAC to 240VAC Compressor (Typical) 30A resistive @ 120 VAC to 240 VAC 1HP @ 120 VAC, 2HP @208 VAC to 240 VAC Defrost Device (Typical) Ordering Information: 9145-00 Time Initiate/Temperature, Pressure Terminate Defrost Timer with Metal Enclosure 9045-00 Time Initiate/Time Terminate Defrost Timer with Metal Enclosure K-354 G No Connection Oils & Chemicals Defrost Device Accessories, Supplies & Commodities Fan (Typical) 1/4HP @ 120 VAC, 1/2HP @ 208 VAC Tools & Instruments Device Rating 30A resistive @ 120 VAC to 240 VAC 1HP @ 120 VAC, 2HP @ 208 VAC to 240 VAC Refrigeration to 240 VAC 30A resistive @ 120 VAC to 240 VAC 1HP @ 120 VAC, 2HP @ 208 VAC to 240 VAC Sec#10i Refridge 52pages_Fridge 12/10/2010 5:07 PM Page 1 PARAGON® - ELECTRONIC TIME CONTROLS EC4000 SERIES 24-HOUR OR 7-DAY Motors Compressors, Chillers, Condensers Refrigeration Indoor Air Quality Heating Components Electrical EC4000 Series - 24-hour, single-channel, capacitor carry-over The EC4000 Series are 24-hour, single-channel, electronic time controls that provide simple, inexpensive control of electrical loads with a time-of-day schedule. As a 24-hr. control, the same ON/OFF schedule is utilized each day Saturday and/or Sunday, or any other day(s) of the week may be skipped. The skipped day(s) can be either load on all day or load OFF all day, depending upon application. Sixteen events are available to provide programming versatility. An event defines an activity either load ON or load OFF. The EC4000 Series are available in either a NEMA 1 steel enclosure or a NEMA Type 3R non-metallic enclosure for indoor or outdoor use. • 24-hr. programming with skip-a-day. • Four-day minimum power outage carry-over without the use of a battery. • 20 amp ballast switch rating on DPST model (UL only). • 16 ON or OFFs per day. • SPST, SPDT and DPST switching. • NEMA 1 or NEMA Type 3R enclosure. • Large display & simple programming with just 4 keys. EC4000/120V EC4000PC/120V EC4000/208-277V EC4000PC/208-277V PC/240V EC4004/120V EC4004PC/120V EC4004/208-277V EC4004PC/208-277V EC4005PC/120, 208-240V RATING PER POLE TYPE OF OUTPUT ENCLOSURE TYPE NEMA WGT Lb WGT Kg 20A 20A 20A 30A SPDT SPDT SPDT SPDT 1 3R 1 3R 2 2-1/2 2 2-1/2 0.9 1.1 0.9 1.1 30A 30A 30A 30A 30A SPST SPST SPST SPST DPST 1 3R 1 3R 3R 2 2-1/2 2 2-1/2 2-1/2 0.9 1.1 0.9 1.1 1.1 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats SHIPPING PART NO K-355 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:07 PM Page 2 Compressors, Chillers, Condensers Refrigeration PARAGON® - ELECTRONIC TIME CONTROLS EC7000 SERIES 24-HOUR OR 7-DAY EC7000/24V EC7000/120V EC7000/208-277V EC7001PC/12VDC EC7001/24V EC7001/120V EC7001/208-277V EC7004/120V EC7004/208-277V EC7005PC/120V, 208-240V RATING PER POLE TYPE OF OUTPUT ENCLOSURE TYPE NEMA WGT Lb WGT Kg 20A 20A 20A 10A 20A 20A 20A 30A 30A 30A SPDT SPDT SPDT SPDT SPDT SPDT SPDT SPST SPST DPST 1 1 1 3R 1 1 1 1 1 3R 2 2 2 1-1/2 2 2 2 2 2 2 0.9 0.9 0.9 0.7 0.9 0.9 0.9 0.9 0.9 0.9 K-356 Heating Components Indoor Air Quality Thermostats Oils & Chemicals SHIPPING PART NO Accessories, Supplies & Commodities NOTE: • Also available in 50 amp. • Contact your nearest branch for details and other available models. • PC= Non Metallic Enclosure NEMA 3R may be used Indoor or Outdoor. Tools & Instruments • 24-hr. or 7-day programming - 7-day programming allows greater flexibility thus added energy savings by allowing loads to remain on only when needed. • 4-day minimum power outage carry-over without the use of batteries. Eliminates the need to replace batteries and the environmental concerns of battery disposal. 16 set points, 30 amp heavy duty relay-output allows switching most electrical loads without the use of contactors. • To-the-minute programming with just four keys and a large easy to read display that uses visual prompts for ease of programming. • SPST, SPDT, DPST switching designed for high immunity to electrical noise. Momentary feature available. • Recessed reset button • Available in NEMA Type 3R (EC7005) or NEMA 1 enclosures. Refrigeration EC7000 Series are single-channel, electronic time controls that provide simple, inexpensive control of electrical loads with a time-of-day schedule. When schedules vary from day to day, the 7-day programming capability allows a different schedule for each day of the week. With 16 set points available, the EC7000 Series provides programming versatility. Models are also available to provide two individually programmable durations of one to 59 seconds in addition to the maintained ON and OFF set points. This provides ideal control for bell or chime ringing in schools and factories. The EC7000 Series Controls are ideal for indoor and outdoor lighting, billboard and security lighting, school crossing lights, heating, ventilating, bell, chime and buzzer ringing, water heater and security system control. Electrical Motors EC7000 Series - 24-hour and 7-day, single-channel, capacitor carry-over Sec#10i Refridge 52pages_Fridge 12/10/2010 5:07 PM Page 3 PARAGON® - 24-HOUR TIME SWITCHES 4000 & 4000S SERIES 24-HOUR 4000, 4010 AND 4210 SERIES The 4000 series has a 24-hour dial with 2 to 14 replaceable trippers for 1 to 7 “On” and “Off” operations per day. The 4000-S series is the same as the 4000 series but with “Skip-A-Day” feature to allow skipping operations on any day or days of the week without disturbing the preset schedule. • 1/2 hour minimum On or Off time; 22-1/2 hour maximum On or Off time. • Manual On/Off lever transfers switch operation without disturbing preset schedule. • Switch slider bar assures positive switching. • Heavy duty terminals accommodate up to AWG #8 wire. • NEMA type 1 indoor case with combination 1/2-3/4 in. knockouts in bottom and sides; hasp for padlock or seal. Oils & Chemicals Accessories, Supplies & Commodities Tools & Instruments Refrigeration With skip-a-day, allows schedule to be omitted on any day(s) without permanently disturbing preset schedule 1-1/2 Hour Minimum On or Off Time, 1 to 7 On/Off Operations Per Day SHIPPING WEIGHT PART NO 4001-00 4001-00B 4001-00M 4002-71 4002-71B 4003-00 4003-00M 4004-71 4004-71B 4004-71M 4005-00B SWITCH TYPE SPST SPST SPST SPST SPST DPST DPST DPST DPST DPST SPDT HP 1 1 1 1 1 1 1 1 1 1 1 AC LINE VOLTS 120 120 120 208-277 208-277 120 208-277 208-277 208-277 208-277 120 ENCLOSURE TYPE NEMA 1 --1 -1 --1 --- Kg 1.1 1.1 0.5 1.1 1.1 1.1 0.5 1.1 1.1 0.5 1.1 AC LINE ENCLOSURE VOLTS TYPE NEMA Lb Kg 4003-00S DPST 1 120 1 2-1/2 1.1 4003-00SB DPST 1 120 -- 2-1/2 1.1 4003-00SM DPST 1 120 -- 1-1/8 0.5 4004-06S DPST -- 24 1 2-1/2 1.1 4004-715 DPST 1 208-277 1 2-1/2 1.1 4005-00S SPDT 1 120 1 2-1/2 1.1 4005-00B SPDT 1 120 -- 2-1/2 1.1 4006-71S SPDT 1 208-277 1 2-1/2 1.1 4007-06S SPDT -- 24 1 3-1/2 1.6 4007-06SB SPDT -- 24 -- 2 1.1 PART NO Lb 2-1/2 2-1/2 1-1/8 2-1/2 2-1/2 2-1/2 1-1/8 2-1/2 2-1/2 1-1/8 2-1/2 SWITCH TYPE HP Leaves load on during day(s) scheduled to be skipped Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration PART NO 4008-20S SWITCH TYPE DPST HP 1 AC LINE VOLTS 208-240 ENCLOSURE TYPE NEMA 1 Lb 2-1/2 Kg 1.1 4010 Series -Standard NEMA 3 indoor/outdoor metal or NEMA type 3R plastic enclosure PART NO SWITCH TYPE HP AC LINE ENCLOSURE VOLTS TYPE NEMA Lb Kg 4011-00 SPST 1 120 3 4-3/4 2.2 4011-00P SPST 1 120 3R 1-3/8 0.6 4013-00 DPST 1 120 3 4-3/4 2.2 4013-00P DPST 1 120 3R 1-3/8 0.6 4014-71 DPST 2 208-277 3 4-3/4 2.2 PARAGON® - 7-DAY TIME SWITCHES 7000 SERIES 4-Pole, 3 Hour Minimum On or Off Time, 4 On/Off Operations per Day, 28 per Week SWITCH RATING PER POLE PART NO SWITCH AMP AC LINE 60 ENCLOSURE AMP T VA HP HZ VOLTS TYPE NEMA Lb TYPE 4014-71P DPST 2 208-277 3R 1-3/8 0.6 4013-00S DPST 1 120 3 4-3/4 2.2 7007-06 4PST-4 NO 40 -- 345 -- 24 1 6-1/2 2.9 2.2 7007-71 4PST-4 NO 40 40 690 -- 208-277 1 6-1/2 2.9 7008-00 2 NO-2 NC 40 -- 690 1 120 1 6-1/2 2.9 7008-00B 2 NO-2 NC 40 -- 690 1 120 -- 6-1/2 2.9 7008-06 2 NO-2 NC 40 -- 345 -- 24 1 6-1/2 2.9 7008-71 2 NO-2 NC 40 -- 690 1 208-207 1 6-1/2 2.9 4014-71S DPST 1 208-277 3 4-3/4 40 690 -- Kg 7007-00 4PST-4 NO 40 120 1 6-1/2 2.9 *Not UL or CSA listed. Hp rating one pole only. Furnished with 7 sets of on/off trippers. Switch rating per pole = 40 amp. Hertz = 60. K-357 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:07 PM Page 4 Refrigeration Compressors, Chillers, Condensers PARAGON® - REFRIGERATION DEFROST CONTROLS/ACCESSORIES USE WITH SERIES QUANTITY PER SET 4000 4010 4210 47017 47217 4000-S 4000-SZ 4210-S 4210-SZ 47017-S 47017-SZ 8025þ 8040 8140 8240 4000-S 4210-S 47017-S 47217-S 7000 7210 4008-S P100 P100-S 4008-S P100-S 1 ON, 1 OFF 6 cutout pins 5 trippers Cutout index tripper (ON) 1 ON, 1 OFF 1 ON, 1 OFF 1 ON, 1 OFF Cutout pins (6) Cutout Index tripper (OFF) Cutout Index tripper (ON) Heating Components X2772 X3495 X3596 X4296 X4299 X8348 X9242 X9246 X9249 X9250 Indoor Air Quality PART NO Electrical Motors DIAL TRIPPERS, PINS A537-W (X3967) A569 (X5815) D874-99 Intermatic Adapter Bracket A1408-99* NOTES 8025 8040 8041 4000 4000-S 4000-SZ 4010 4010-S 4010-SZ 41010 EC4000 P100 EC7000 623 1015 42010 1015-40TS 47017 47217 7000 7010 7210 4000 4000-S 4010 4010-S P100 EC4000 EC7000 EC4000 EC4004 4010PC EC7000 EC7001 EC7004 -not for carry-over models 1-1/2 1-1/2 0.7 0.7 not for carry-over models may be used with carry-over models not for carry-over models -- 1-1/2 1-1/2 3 oz. 3oz. 0.7 0.7 0.1 0.1 *Must be used with 4010PC. K-358 Tools & Instruments A454 (X2626) A536 (X4105) SHIPPING WGT LB KG USE WITH SERIES Refrigeration PART NO Accessories, Supplies & Commodities Oils & Chemicals Thermostats Brackets For Panel Mounting Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Sec#10i Refridge 52pages_Fridge 12/10/2010 5:07 PM Page 5 Refrigeration PARKER - THERMOSTATIC EXPANSION VALVES TXV MODEL NUMBER SELECTION K-359 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:07 PM Page 6 Refrigeration Compressors, Chillers, Condensers PARKER - THERMOSTATIC EXPANSION VALVES TXV MODEL NUMBER SELECTION Parker TEV Model Visual C(E) Series TEV SC(E) Series TEV Applications: Low Profile Coolers, Ice Machines, Beverage Dispensers Applications: Rail and Transport Refrigeration, Supermarket Cases, Walk-in Coolers Applications: Supermarket Cases, Walk-in Freezers, Ice Machines EC(E) Series TEV H Series TEV HC Series TEV Applications: Supermarket Cases, Transport Refrigeration, Walk-in Coolers Applications: Air Conditioning, Heat Pumps, Bi-flow (Package Systems) Applications: Air Conditioning, Heat Pumps Refrigerant R12, R134A R12, R134A R22, R407C R22, R407C R22, R407C R22, R407C R22, R407C R502, R404A, R507 R502, R404A, R507 R502, R404A, R507 R502, R404A, R507 Cap. tube length (inches) 60 60 60 60 60 60 60 60 60 60 60 K-360 Evaporator Temperature Range Used from -40 to +60 degrees F Used from +10 to +60 degrees F Used from -40 to 0 degrees F Used from -40 to +60 degrees F Used from -40 to +10 degrees F Used from -40 to +10 degrees F Used from +10 to +60 degrees F Used from -40 to +60 degrees F Used from -40 to +10 degrees F Used from +10 to +60 degrees F Used from -40 to 0 degrees F Heating Components Indoor Air Quality Thermostats Oils & Chemicals Accessories, Supplies & Commodities Model Number KT-46-JW KT-46-JX60 KT-46-VZ KT-46-VW KT-46-VX35 KT-46-VX75 KT-46-VX100 KT-46-SW KT-46-SX35 KT-46-SX110 KT-46-SZ Tools & Instruments Part Number 180376 180384 180424 180416 180418 180420 180422 180394 180396 180406 180414 Refrigeration OWER ELEMENTS FOR MODEL SC(E), EC(E), AND C(E) SERIES VALVES Electrical Motors N Series TEV Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Sec#10i Refridge 52pages_Fridge 12/10/2010 5:07 PM Page 7 Refrigeration PARKER - EG AND EGE SERIES - THERMOSTATIC EXPANSION VALVES K-361 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:07 PM Page 8 R-12, R-134a, R-401A, R-401B SC & SCE Series (Replaces EG and EGE Series) Refrigerants R-12, R-134a, R-401A, R-401B PART NO 040413-05 040413-07 040414-01 MODEL NO SCE-AA-JW SCE-A-JW SCE-B-JW NOMINAL TONS 1/2 1 1-2 INLET in ODF) 3/8 3/8 3/8 OUTLET (in ODF) 1/2 1/2 1/2 EQUALIZER (in ODF) 1/4 1/4 1/4 NOMINAL TONS 1/4 1/2 1/2 1 1 2 2 INLET (in ODF) 3/8 3/8 3/8 3/8 3/8 3/8 3/8 OUTLET (in ODF) 1/2 1/2 1/2 1/2 1/2 1/2 1/2 EQUALIZER (in ODF) 1/4 1/4 1/4 1/4 1/4 1/4 1/4 OUTLET (in ODF) 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 EQUALIZER (in ODF) 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Motors PARKER - EG AND EGE SERIES - THERMOSTATIC EXPANSION VALVES Compressors, Chillers, Condensers Refrigeration INLET (in ODF) 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Heating Components Indoor Air Quality NOMINAL TONS 1/4 1/2 1/2 1 1 1-1/2 1-1/2 1-1/2 Accessories, Supplies & Commodities MODEL NO SCE-AAA-SZ SCE-AA-SW SCE-AA-SZ SCE-A-SW SCE-A-SZ SCE-B-SW SCE-B-SX35 SCE-B-SZ Tools & Instruments PART NO 040415-15 040416-09 040416-11 040416-13 040416-15 040417-09 040417-10 040417-11 Thermostats Refrigerants R-402A, R-402B, R-404A, R-502, R-507 Oils & Chemicals MODEL NO SCE-AAA-VW SCE-AA-VW SCE-AA-VZ SCE-A-VW SCE-A-VZ SCE-B-VW SCE-B-VZ K-362 Refrigeration PART NO 040406-09 040406-13 040406-15 040407-09 040407-11 040408-13 040407-15 Electrical Refrigerants R-22, R407C Sec#10i Refridge 52pages_Fridge 12/10/2010 5:07 PM Page 9 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration PARKER - HAE SERIES AND HCAE SERIES - THERMOSTATIC EXPANSION VALVES The H series balanced port valve is designed specifically for air conditioning and heat pumps used in both air or water source systems. It offers features such as select indoor and/or outdoor thermostatic Rainbow Charges™, bleeds, and a variety of connection styles for the inlet, outlet, and external equalizer. The HC series adds a built-in 5 ton check valve for R-22, R-407C and R-410A heat pump applications with either factory set or field adjustable superheat. APPLICATIONS: • Air Conditioning Systems • Heat Pump Systems • Bi-flow (package) Systems P4059 FEATURES: • Stainless steel power element • Bypass bleeds available • Bi-directional metering available • Weight: 10.7 oz. (.30 kg) • Factory set or field adjustable superheat • Low pressure drop internal check valve P4060 P4061 PARKER - THERMOSTATIC EXPANSION VALVES H Series and HC Series Refrigerant Refrigerant Capacity Designation Range Nominal Capacity Exterior Equalized Internal Equalized 1/2 - 1 1/2 1 – 1/2 HA 1-1/2V HAE 1-1/2V 1-1/2 – 3 3 HA 3V HAE 3V 3-1/2 – 5 5 HA 5V HAE 5V 5-1/2 - 77-1/2 HAE 7-1/2V 1/2 8 - 10 10 HAE 10V models with internal check valves - “C” designation R-22 R-407C R-410A V K HCAE 1-1/2V HCAE 3V HCAE 5V Rainbow Charges X-100A, X100 Bleed for Off cycle Operation B B B B 1/4, 3/8, 1/2 & 5/8”_ ODF flo-rater 3/8, 1/2, 5/8 & 7/8”_ ODF flo-rater 1/4, 3/8, 1/2 & 5/8”_ ODF flo-rater 3/8, 1/2, 5/8 & 7/8”_ ODF flo-rater 1/4, 3/8, 1/2 & 5/8”_ ODF flo-rater 3/8, 1/2, 5/8 & 7/8”_ODF flo-rater 1/4, 3/8, 1/2 & 5/8”_ODF flo-rater 3/8, 1/2, 5/8 & 7/8”_ODF flo-rater B 1/2 - 1-1/2 1-1/2 – 3 3-1/2 – 5 1-1/2V 3 5 HCA 1-1/2V HCA 3V HCA 5V 1/2 - 1-1/2 1-1/2 – 3 3-1/2 – 5 5-1/2 – 7 7-1/2 – 9 1-1/2V 3 5 7 9 1/2 - 1-1/2 1–2 1-1/2 – 3 3-1/2 – 5 1-1/2 5 5 5 HA 1-1/2K HAE 1-1/2K B HA 3K HAE 3K B X200 HA 5K HAE 5K B HAE 7K B HAE 9K B specific models with internal check valves - “C” designation HCA 1-1/2K HCAE 1-1/2K B HCA 2K HCAE 2K B X200 HCA 3K HCAE 3K B HCA 5K HCAE 5K B X100A, X100 NOTES: 1. U.L. recognized for maximum operational pressure of 650 psig (45 bars). 2. Maximum storage temperature 130° F (55° C). 3. Consult Parker for pressure and temperature exceptions. K-363 Inlet Outlet Connections Connections B B B Sec#10i Refridge 52pages_Fridge 12/10/2010 5:07 PM Page 10 PARKER - H AND HC SERIES - THERMOSTATIC EXPANSION VALVES R-22, R-407C Dimensions (inches) Connections (ODF) 0.375 1.69 1.69 0.500 1.46 1.46 0.625 1.57 1.57 0.875 — 2.07 Electrical 1.46 Indoor Air Quality Heating Components Connections: flo-rater Inlet: 3/4”-20 UNF2A Outlet: 3/4”-20 UNF2A PARKER H AND HC SERIES Refrigerants R-22, R-407C PART NO 040587-01 040587-02 040725-02 040727-01 041439-03 041438-01 040725-01 040588-01 040588-02 040726-02 040728-01 041449-03 041448-01 040726-01 MODEL NO HAE-3-VX100 HAE-3-VX100B15 HAE-3-VX100A HCAE-3-VX100 HCAE-3-VX100B20 HCAE-3-VX100A HCAE-3-VX100A HAE-5-VX100 HAE-5-VX100B15 HAE-5-VX100A HCAE-5-VX100 HCAE-5-VX100B20 HCAE-5-VX100A HCAE-5-VX100A NOMINAL TONS 11/2 - 3 11/2 - 3 11/2 - 3 11/2 - 3 11/2 - 3 11/2 - 3 11/2 - 3 31/2 - 5 31/2 - 5 31/2 - 5 31/2 - 5 31/2 - 5 31/2 - 5 31/2 - 5 INLET (in ODF) 3/8 3/8 Aeroquip fitting 3/8 3/8 Aeroquip fitting Chatliff fitting 3/8 3/8 Aeroquip fitting 3/8 3/8 Aeroquip fitting Chatliff fitting OUTLET (in ODF) 1/2 1/2 Aeroquip fitting 1/2 1/2 Aeroquip fitting Chatliff fitting 5/8 5/8 Aeroquip fitting 5/8 5/8 Aeroquip fitting Chatliff fitting EQUALIZER (in) 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT NOMINAL TONS 11/2 - 3 11/2 - 3 11/2 - 3 11/2 - 3 11/2 - 3 11/2 - 3 31/2 - 5 31/2 - 5 31/2 - 5 31/2 - 5 31/2 - 5 31/2 - 5 INLET (in ODF) 3/8 3/8 3/8 3/8 Aeroquip fitting Chatliff fitting 3/8 3/8 3/8 3/8 Aeroquip fitting Chatliff fitting OUTLET (in ODF) 1/2 1/2 1/2 1/2 Aeroquip fitting Chatliff fitting 5/8 5/8 5/8 5/8 Aeroquip fitting Chatliff fitting EQUALIZER (in) 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT 1/4 FL NUT Refrigerant R-410A PART NO 040635-01 040635-02 040771-01 041426-05 041426-01 040769-01 040634-01 040634-02 040772-01 041436-06 041436-02 040770-01 MODEL NO HAE-3-ZX200 HAE-3-ZX200B15 HCAE-3-ZX200 HCAE-3-ZX200B20 HCAE-3-ZX200 HCAE-3-ZX200A HAE-5-ZX200 HAE-5-ZX200B15 HCAE-5-ZX200 HCAE-5-ZX200B20 HCAE-5-ZX200 HCAE-5-ZX200A K-364 Thermostats 1.46 Oils & Chemicals 0.250 Accessories, Supplies & Commodities B Tools & Instruments A Refrigeration INLET/OUTLET Motors NOTE: For adjustable add .66 inch. Compressors, Chillers, Condensers Refrigeration Sec#10i Refridge 52pages_Fridge 12/10/2010 5:07 PM Page 11 PARKER - EC AND ECE SERIES - THERMOSTATIC EXPANSION VALVES The EC Series features extended ODF solder connections, brass body, and balanced port design. The new stainless steel power element makes it suited for both refrigeration and air conditioning applications. Rainbow Charges™ are indicated in the chart below for medium temperature “W” charges, low temperature “Z” charges or MOP “X” charge for those applications. APPLICATIONS: • Small Chillers • Heat Pump Units • Air Conditioning Units • Freezers • Walk-in Boxes • Refrigerated Cases • Mobile Refrigeration FEATURES: • Extended ODF connections • Balanced port design • 30 inch capillary tube with shock loop • Stainless steel power element • Field adjustable superheat • 1/4 inch ODF external equalizer • Rainbow charges available • Weight: 1.0 lbs/0.45 kg PARKER - THERMOSTATIC EXPANSION VALVES EC Series Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration EC Series Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Refrigerant R-12 R-134a R-401A R-401B R-402A R-402B R-404A R-502 R-507 R-22 R-407C Refrigerant designation Orifice Capacity designation range Internally equalized External equalized Rainbow charges™ Inlet connection Outlet connection (optional) W, X60 3/8” ODF 1/2" ODF 5/8” ODF) 1/4" ODF Equalizer connection J AA A B C 1/8 -1/2 1/4 -1 1-2 1-1/2 -3 EC-AA-J EC-A-J EC-B-J EC-C-J ECE-AA-J ECE-A-J ECE-B-J ECE-C-J S AA A B C 1/8 -1/2 1/4 -1 1-2 1-1/2 -4 EC-AA-S EC-A-S EC-B-S EC-C-S ECE-AA-S ECE-A-S W, Z, X110 ECE-B-S X35 ECE-C-S 3/8” ODF 1/2" ODF (5/8” ODF) 1/4" ODF V AA A B C 1/5 -3/4 1/2 -1-1/2 1-1/2 -3 3-1/2 -5 EC-AA-V EC-A-V EC-B-V EC-C-V ECE-AA-V ECE-A-V W, Z, X100 ECE-B-V X35 ECE-C-V 3/8” ODF 1/2" ODF (5/8” ODF) 1/4" ODF NOTES: 1. Maximum operational pressure 500 psig (35 bars) high side and 275 psig (19 bars) low side. 2. Maximum storage temperature 130° F (55° C). 3. Consult Parker for pressure and temperature exceptions. 4. Do not use “W” or “Z” liquid charges in applications where bulb temperatures can exceed 130° F (55° C). For these applications use type “X” MOP gas charge only. K-365 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 12 PART NO 040311-01 040296-01 040358-02 040297-01 040314-01 040298-01 040299-05 040432-01 040299-01 040299-03 040299-04 MODEL NO EC-AA-JW EC-A-JW EC-A-JX60 ECE-A-JW ECE-B-JW EC-C-JW ECE-C-JW ECE-C-JW ECE-C-JW ECE-D-JW ECE-D-JX60 NOMINAL TONS 1/8 - 1/2 1/4 -1 1/4 -1 1/4 -1 1 -2 11/2 -3 11/2 -3 11/2 -3 11/2 -3 31/2 -5 31/2 -5 INLET (in ODF) 1/4 3/8 3/8 3/8 1/2 1/2 3/8 1/2 1/2 5/8 5/8 OUTLET (in ODF) 1/2 1/2 1/2 1/2 5/8 7/8 5/8 5/8 7/8 7/8 7/8 EQUALIZER (in) ---1/4 1/4 -1/4 1/4 1/4 1/4 1/4 MODEL NO EC-AA-VW ECE-AA-VW ECE-AA-VW ECE-AA-VX100 ECE-AA-VZ ECE-A-VW ECE-A-VX100 ECE-A-VZ ECE-B-VW ECE-B-VW ECE-B-VZ ECE-B-VX35 ECE-B-VX100 ECE-B-VX100 ECE-B-VX100 ECE-B-VX100 ECE-C-VW ECE-C-VX35 ECE-C-VX100 ECE-C-VX100 ECE-C-VX100 ECE-C-VX100 ECE-C-VX100 ECE-C-VX100B15 ECE-D-VW ECE-D-VX100 ECE-D-VX100 ECE-D-VX100B15 NOMINAL TONS 1/5 - 3/4 1/5 - 3/4 1/5 - 3/4 1/5 - 3/4 1/5 - 3/4 1/2 - 11/2 1/2 - 11/2 1/2 - 11/2 11/2 -3 11/2 -3 11/2 -3 11/2 -3 11/2 -3 11/2 -3 11/2 -3 11/2 -3 31/2 -5 31/2 -5 31/2 -5 31/2 -5 31/2 -5 31/2 -5 31/2 -5 31/2 -5 51/2 -71/2 51/2 -71/2 51/2 -71/2 51/2 -71/2 INLET (in ODF) 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 3/8 1/2 3/8 3/8 1/2 1/2 1/2 1/2 3/8 3/8 1/2 1/2 5/8 1/2 5/8 1/2 5/8 5/8 OUTLET (in ODF) 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 1/2 5/8 1/2 5/8 5/8 5/8 7/8 7/8 1/2 5/8 5/8 7/8 7/8 5/8 7/8 7/8 7/8 7/8 EQUALIZER (in) -1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 NOMINAL TONS 1/8 - 1/2 1/8 - 1/2 1/8 - 1/2 1/8 - 1/2 1/8 - 1/2 1/4 - 1 1/4 - 1 1/4 - 1 1/4 - 1 1/4 - 1 1/4 - 1 1 -2 1 -2 1 -2 11/2 -4 11/2 -4 11/2 -4 11/2 -4 41/2 -6 41/2 -6 INLET (in ODF) 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 3/8 1/2 5/8 5/8 OUTLET (in ODF) 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 7/8 1/2 7/8 7/8 7/8 EQUALIZER (in) Motors R-12, R-134a, R-401A, R-401B Compressors, Chillers, Condensers Refrigeration PARKER - EC AND ECE SERIES - THERMOSTATIC EXPANSION VALVES MODEL NO EC-AA-SW EC-AA-SX35 EC-AA-SZ ECE-AA-SW ECE-AA-SX35 EC-A-SW EC-A-SX35 EC-A-SZ ECE-A-SW ECE-A-SW ECE-A-SX35 ECE-B-SW ECE-B-SX35 ECE-B-SZ ECE-C-SW ECE-C-SW ECE-C-SZ ECE-C-SX110 ECE-D-SW ECE-D-SZ K-366 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Heating Components Indoor Air Quality Thermostats Oils & Chemicals Accessories, Supplies & Commodities PART NO 040315-01 040315-02 040361-03 040316-01 040316-02 040317-01 040317-02 040362-03 040318-01 040362-05 040318-02 040363-05 040320-02 040363-07 040320-01 040322-01 040364-07 040322-04 040322-05 040322-07 Tools & Instruments R-402A, R-402B, R-404A, R-502, R-507 Refrigeration PART NO 040367-01 040368-01 040349-05 040368-04 040349-07 040350-05 040246-10 040350-07 040351-05 040374-01 040351-07 040374-02 040206-35 040374-06 040374-07 040374-04 040206-05 040206-06 040206-33 040206-21 040206-44 040206-22 040206-28 040262-01 040206-46 040206-16 040206-20 040262-02 Electrical R-22, R-407C Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 13 Compressors, Chillers, Condensers Refrigeration PARKER - N AND NE SERIES - THERMOSTATIC EXPANSION VALVES This small flare brass valve series is ideally suited where space is at a premium. Its stainless steel power element and compact body has always made it the first choice for installation in commercial refrigeration systems. External equalized models are provided with a 30”capillary and 1/4’’SAE flare nut, eliminating the need to run a separate equalizer line. Medium, low & MOP (X) charges are available as noted below. Applications: Electrical Motors • Low Profile Coolers • Beverage Dispensers • Beverage Boxes • Small Chillers • Ice Machines • Small Freezers • Compact body • Removable inlet screen • Factory set superheat • Accurate and stable control • Right angle configuration • 30” capillary tube • Weight: 5.0 oz/.14 kg PARKER - THERMOSTATIC EXPANSION VALVES N Series Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Features: N SERIES Refrigerant Refrigerant designation R-12 R-134a J R-401A R-401B R-402A R-402B R-404A R-502 S Nominal Capacity Internally capacity range equalized 1/4 1/2 2 1/4 -1/2 1/4 -3/4 1-2 N1/4 J N1/2 J N2J 1/4 1/2 2 1/4 -1/2 1/4 -3/4 1-2 N1/4 S N1/2 S N2S 1/4 1/2 1 3 1/4 -1/2 1/4 -3/4 1/2 -1 1-1/2 -3 N 1/4 V N 1/2 V N1V N3V Externally equalized Rainbow Inlet Outlet charges™ connection connection 1/4” SAE NE 2 J W, X60 NE 2 S W, Z, X110 X35 1/4” SAE 3/8” SAE 1/4” SAE 1/4” &3/8” SAE 1/2” SAE 1/2” SAE 3/8” SAE R-507 R-22 R-407C V NE 3 V 1/4” SAE W, Z, X100 1/4” or 3/8” X35 SAE 3/8” SAE 1/2” SAE NOTES: 1. Maximum operational pressure 500 psig (35 bars) high side and 275 psig (19 bars) low side. 2. Maximum storage temperature 130° F (55° C). 3. Consult Parker for pressure and temperature exceptions. 4. Do not use “W” or “Z” liquid charges in applications where bulb temperatures can exceed 130° F (55° C). For these applications use type “X” MOP gas charge only. K-367 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 14 Equalizer Internal Internal Internal Internal Internal Internal External Refrigerants R-22, R-407A Part Number Model Number 040077-07 N-1/4-VW 040270-01 N-1/2-VW 040077-08 N-1-VW 040077-06 N-1-VW 040077-01 N-1-VX100 040084-01 NE-2-VX100 031119-01 N-3-VX100B10 Inlet (inches) 1/4 SAE 1/4 SAE 1/4 SAE 3/8 SAE 3/8 SAE 3/8 SAE 3/8 SAE Outlet (inches) 1/2 SAE 1/2 SAE 1/2 SAE 1/2 SAE 1/2 SAE 1/2 SAE 1/2 SAE Equalizer Internal Internal Internal Internal Internal External Internal Refrigerants R-402A, R-402B, R-404A, R-502, R-507 Part Number Model Number Nominal Tons Inlet (inches) 040326-05 N-1/2-SW 1/4 - 3/4 1/4 SAE 040326-01 N-1/2-SW 1/4 - 3/4 3/8 SAE 040326-03 N-1/2-SZ 1/4 - 3/4 3/8 SAE 040327-01 N-2-SW 1-2 3/8 SAE 040328-01 NE-2-SW 1-2 3/8 SAE Outlet (inches) 1/2 SAE 1/2 SAE 1/2 SAE 1/2 SAE 1/2 SAE Equalizer Internal Internal Internal Internal External Accessories, Supplies & Commodities Tools & Instruments K-368 Refrigeration Nominal Tons 1/4 - 1/2 1/4 - 3/4 1/2 - 1 1/2 - 1 1/2 - 1 1-2 11/2 - 3 Motors Outlet (inches) 1/2 SAE 1/2 SAE 1/2 SAE 1/2 SAE 1/2 SAE 1/2 SAE 1/2 SAE Electrical Inlet (inches) 1/4 SAE 3/8 SAE 3/8 SAE 3/8 SAE 3/8 SAE 3/8 SAE 3/8 SAE Oils & Chemicals Refrigerants R-12, R-134A, R-401A, R-401B Part Number Model Number Nominal Tons 040293-01 N-1/2-JW 1/4 - 3/4 040293-03 N-1/2-JW 1/4 - 3/4 040293-04 N-1/2-JX60 1/4 - 3/4 040279-01 N-1-JW 1/2 - 1 040294-01 N-2-JW 1-2 040294-02 N-2-JX60 1-2 040303-01 NE-2-JW 1-2 Heating Components THERMOSTATIC EXPANSION VALVES N & NE Series Indoor Air Quality R-12 R-134a, R-401A, R-401B Thermostats PARKER - N AND NE - THERMOSTATIC EXPANSION VALVES Compressors, Chillers, Condensers Refrigeration Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 15 PARKER - C AND CE SERIES - THERMOSTATIC EXPANSION VALVES The C Series incorporates a brass body with SAE flare fittings using balanced port construction, allowing operation over varying load conditions. Designed for use on small refrigeration and or air conditioning systems, the external equalized models are provided with a ¼ inch SAE male connection. The new stainless steel power element and shock loop provides added benefits to all installations. A variety of Rainbow Charges™ add further flexibility for operation and selection. APPLICATIONS: • Small Refrigeration Systems • Slush Machines • Air Conditioning Units • Freezers • Walk-in Coolers • Refrigerated Cases • Rail & Transport Refrigeration Electrical Motors Compressors, Chillers, Condensers Refrigeration FEATURES: • Balanced port • Stainless steel power element • Inlet strainer • 30” capillary tube with shock loop • Field adjustable superheat • 1/4" SAE external equalizer • Weight: 1.0 lbs/0.45 kg PARKER - THERMOSTATIC EXPANSION VALVES Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components C Series C SERIES REFRIGERANT R-12 R-134a R-401A R-401B R-402A R-402B R-404A R-502 R-507 REFRIGERANT DESIGNATION J S R-22 R-407C V ORIFICE DESIGNATION CAPACITY RANGE INTERNALLY EQUALIZED EXTERNALLY EQUALIZED RAINBOW CHARGES™ AA A B C 1/8 - 1/2 1/4 - 1 1-2 1-1/2 - 3 C-AA-J C-A-J C-B-J C-C-J CE-AA-J CE-A-J CE-B-J CE-C-J AA A B C 1/8 -1/2 1/4 - 1 1-2 1-1/2 - 4 C-AA-S C-A-S C-B-S C-C-S CE-AA-S CE-A-S CE-B-S CE-C-S W, Z, X110 X-35 AA A B C 1/5 - 3/4 1/2 - 1-1/2 1-1/2 - 3 3-1/2 - 5 C-AA-V C-A-V C-B-V C-C-V CE-AA-V CE-A-V CE-B-V CE-C-V W, Z, X100 X-35 INLET CONNECTION OUTLET CONNECTION EQUALIZER CONNECTION 1/4" SAE (3/8” optional) 1/2" SAE 1/4” SAE W, X60 3/8” SAE 1/4" SAE (3/8” optional) 1/4” SAE 1/2" SAE 3/8” SAE 1/4" SAE (3/8” optional) 1/2" SAE 1/2” SAE 3/8” SAE NOTES: 1. Maximum operational pressure 500 psig (35 bars) high side and 275 psig (19 bars) low side. 2. Maximum storage temperature 130° F (55° C). 3. Consult Parker for pressure and temperature exceptions. 4. Do not use “W” or “Z” liquid charges in applications where bulb temperatures can exceed 130° F (55° C). For these applications use type “X” MOP gas charge only. K-369 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 16 1/8 - 1/2 1/8 - 1/2 1/8 - 1/2 1/8 - 1/2 1/4 - 1 1/4 - 1 1/4 - 1 1/4 - 1 1-2 1-2 1-2 1-2 1-1/2 - 3 1-1/2 - 3 1-1/2 - 3 1-1/2 - 3 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 PART NO MODEL NO NOMINAL TONS INLET (in ODF) OUTLET (in ODF) 040289-01* 040289-02 040289-05* 040289-04* 040290-01* 040290-02* 040290-05 040290-04* 040241-01* 040241-02* 040241-03* 040241-05 040241-04* 040242-01* 040242-02* 040242-05 040242-04* 040379-01* 040379-02 040379-05 040379-04* 040380-01* 040380-02* 040380-05 040380-04* 040222-06* 040222-02 040222-05 040222-04* 040223-06* 040223-02 040223-05 040223-04* C-AA-VW C-AA-VX35 C-AA-VZ C-AA-VX100 CE-AA-VW CE-AA-VX35 CE-AA-VZ CE-AA-VX100 C-A-VW C-A-VX35 C-A-VX65 C-A-VZ C-A-VX100 CE-A-VW CE-A-VX35 CE-A-VZ CE-A-VX100 C-B-VW C-B-VX35 C-B-VZ C-B-VX100 CE-B-VW CE-B-VX35 CE-B-VZ CE-B-VX100 C-C-VW C-C-VX35 C-C-VZ C-C-VX100 CE-C-VW CE-C-VX35 CE-C-VZ CE-C-VX100 1/5 - 3/4 1/5 - 3/4 1/5 - 3/4 1/5 - 3/4 1/5 - 3/4 1/5 - 3/4 1/5 - 3/4 1/5 - 3/4 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 1/2 - 1-1/2 --------3-1/2 - 5 3-1/2 - 5 3-1/2 - 5 3-1/2 - 5 3-1/2 - 5 3-1/2 - 5 3-1/2 - 5 3-1/2 - 5 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 --1/4 1/4 --1/4 1/4 --1/4 1/4 --1/4 1/4 EQUALIZER (in) Heating Components C-AA-JW C-AA-JX60 CE-AA-JW CE-AA-JX60 C-A-JW C-A-JX60 CE-A-JW CE-A-JX60 C-B-JW C-B-JX60 CE-B-JW CE-B-JX60 C-C-JW C-C-JX60 CE-C-JW CE-C-JX60 ----1/4 1/4 1/4 1/4 -----1/4 1/4 1/4 1/4 ----1/4 1/4 1/4 1/4 ----1/4 1/4 1/4 1/4 R-22, R-407C *Normally stocked items. All others are special order and require a 4-week delivery. K-370 Indoor Air Quality 040329-01* 040329-02* 040330-01* 040330-02 040281-01* 040281-02 040282-01* 040282-02* 040331-01* 040331-02 040332-01* 040332-02* 040295-01* 040295-02* 040283-01* 040283-02* EQUALIZER (in) Thermostats OUTLET (in ODF) Oils & Chemicals INLET (in ODF) Accessories, Supplies & Commodities NOMINAL TONS Tools & Instruments MODEL NO Refrigeration PART NO Motors R-12, R-134a, R-401A, R-401B Electrical PARKER - C AND CE SERIES - THERMOSTATIC EXPANSION VALVES Compressors, Chillers, Condensers Refrigeration Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 17 PARKER - C AND CE SERIES - THERMOSTATIC EXPANSION VALVES R-402A, R-402B, R-404A, R-502, R-507 PART NO MODEL NO NOMINAL TONS INLET (in ODF) OUTLET (in ODF) 040333-01 040333-02* 040333-03 040333-04 040334-01* 040334-02* 040334-03* 040334-04 040335-01* 040335-02* 040335-03 040335-04 040336-01* 040336-02* 040336-03 040336-04 040337-01* 040337-02 040337-03 040337-04 040338-01* 040338-02* 040338-03* 040338-04 040339-01* 040339-02 040339-03* 040339-04 040340-01* 040340-02* 040340-03* 040340-04* C-AA-SW C-AA-SX35 C-AA-SZ C-AA-SX110 CE-AA-SW CE-AA-SX35 CE-AA-SZ CE-AA-SX110 C-A-SW C-A-SX35 C-A-SZ C-A-SX110 CE-A-SW CE-A-SX35 CE-A-SZ CE-A-SX110 C-B-SW C-B-SX35 C-B-SZ C-B-SX110 CE-B-SW CE-B-SX35 CE-B-SZ CE-B-SX110 C-C-SW C-C-SX35 C-C-SZ C-C-SX110 CE-C-SW CE-C-SX35 CE-C-SZ CE-C-SX110 1/8 - 1/2 1/8 - 1/2 1/8 - 1/2 1/8 - 1/2 1/8 - 1/2 1/8 - 1/2 1/8 - 1/2 1/8 - 1/2 1/4 - 1 1/4 - 1 1/4 - 1 1/4 - 1 1/4 - 1 1/4 - 1 1/4 - 1 1/4 - 1 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-1/2 - 4 1-1/2 - 4 1-1/2 - 4 1-1/2 - 4 1-1/2 - 4 1-1/2 - 4 1-1/2 - 4 1-1/2 - 4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 *Normally stocked items. All others are special order and require a 4-week delivery. Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-371 EQUALIZER (in) ----1/4 1/4 1/4 1/4 ----1/4 1/4 1/4 1/4 ----1/4 1/4 1/4 1/4 ----1/4 1/4 1/4 1/4 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 18 VALVE TYPE 76053 76052 76051 RS-55 RS-65 RS-70 EVAPORATOR SECTION LINE LINE 1-1/8" ODF 1-1/8" ODF 1-3/8" ODF 1-3/8" ODF 1-3/8" ODF 1-3/8" ODF DISCHARGE LINE 7/8" ODF 7/8" ODF 7/8" ODF RS65, RS70 Suction Line Capacities — Tons CAPACITIES TONS @ 1 PSI PRESSURE DROP Capacities TONS @ 1PSIG Pressure drop R-12 R-22 R-502 R-134a R-404A (HP-62)* R-507 (AZ-50)* 20 2.9 4.4 3.5 4.2 3.9 3.9 Evaporator temperatures in °F 10 0 -10 -20 2.6 2.3 2.0 1.7 4.0 3.5 3.1 2.7 3.1 2.8 2.4 2.1 3.7 3.2 2.8 2.4 3.5 3.1 2.8 2.4 3.5 3.1 2.8 2.4 -40 1.3 2.0 1.6 1.7 1.8 1.8 R-12 R-22 R-502 R-134a R-404A (HP-62)* R-507 (AZ-50)* 20 10 0 -10 -20 -40 6.9 10.5 8.4 10.0 9.4 9.4 6.1 9.4 7.4 8.8 8.4 8.4 5.4 8.4 6.6 7.6 7.4 7.4 4.7 7.4 5.8 6.6 6.6 6.6 4.0 6.5 5.0 5.6 5.8 5.8 3.0 4.9 3.7 4.0 4.3 4.3 *AZ-50 & HP-62 are products of Allied signal & DuPont respectively. Heating Components RS55 Suction Line Capacities — Tons Evaporator Temperatures in °F Motors PART NO Electrical CONNECTIONS 3-WAY HOT GAS DEFROST VALVES Compressors, Chillers, Condensers Refrigeration *AZ-50 & HP-62 are products of Allied Signal & DuPont respectively. APPLICATION Oils & Chemicals Thermostats Indoor Air Quality Designed for hot gas defrost from the suction side of the evaporator coil, these valves are commonly used with modern multiplex systems. K-372 Refrigeration Tools & Instruments Accessories, Supplies & Commodities P4141 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 19 Motors Compressors, Chillers, Condensers Refrigeration PARKER - SIGHT GLASS AND MOISTURE INDICATORS KEY FEATURES AND BENEFITS • Available in all popular end connections up to 2-1/8 inch • Solid copper extended sweat fittings permit solder installation without disassembly. • Flare models feature forged brass body and fittings. • Compact design, low silhouette, short laying in length. • Extremely accurate. • Easy viewing. • U.L. listed File No. SA4744. Sight Glass Moisture Indicator Dimensions Thermostats Indoor Air Quality Heating Components Electrical PSG-10T Replacement indicator element and o-ring. PART NO MODEL NO FITTING SIZE (in) FITTING TYPE 070293-01 070294-02 070295-03 070296-04 070281-01 PSG-2 PSG-3 PSG-4 PSG-5 PSG-2MF 1/4 3/8 1/2 5/8 1/4 070282-02 PSG-3MF 3/8 070133-03 PSG-4MF 1/2 070284-04 PSG-5MF 5/8 070135-01 070135-02 070135-03 070135-03 070132-01 070132-02 070278-11 070289-13 070280-17 PSG-2S PSG-3S PSG-4S PSG-5S PSG-7S PSG-9S PSG-11S PSG-13S PSG-17S 1/4 3/8 1/2 5/8 7/8 1-1/8 1-3/8 1-5/8 2-1/8 SAE Male Flare SAE Male Flare SAE Male Flare SAE Male Flare SAE Male x Female Flare SAE Male x Female Flare SAE Male x Female Flare SAE Male x Female Flare Sweat Sweat Sweat Sweat Sweat Sweat Sweat Sweat Sweat OVERALL LENGTH (in) 3.42 3.56 3.82 4.06 3.05 CUT OUT LENGTH (in) ------ 3.17 -- 3.39 -- 3.69 -- 4.88 4.88 4.88 4.88 6.25 6.25 7.97 7.97 7.97 4.19 4.12 3.87 3.62 4.73 4.45 6.03 5.79 5.47 SYSTEM REFRIGERANT LIQUID LINE TEMPERATURE SYSTEM INDICATOR CONDITIONS COLOR Dry Caution Wet Green 12 22 134a 401A 401B/C 404A 410A 502 507A 75° F 75° F 75° F 75° F 75° F 75° F 75° F 75° F 75° F below 50 below 40 below 69 69-240 above 240 below 10 10-50 above 50 below 33 33-115 above 115 below 5 below 30 Yellow/Green 5 -15 above Yellow 15 30-110 above 110 below 35 35-120 above 120 below 120 120-420 above 420 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Moisture Color Indications in PPM at Liquid Specific Temperatures: K-373 50-175 above 175 40-140 above 140 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 20 PARKER STEEL LIQUID LINE FILTER DRIERS (LLD SERIES) KEY FEATURES AND BENEFITS • High moisture and acid capacity. Maximum filtration capacity. • Exceptional compatibility with new polyolester oils. • Compatible with all existing and new refrigerants and blends including 134a, 401A/B, 402A/B, 404A, 407A/B/C, 410A, 502, 507A. • Spring loaded 100% molecular sieve. For 410A, Parker recommends XH11 (consult Parker). • Solid copper sweat fittings. • Powder paint exterior coating surpasses 500 hour ASTM salt spray test and resists corrosion. • Eliminates concern of additive stripping. • 032 MF liquid line drier features 1/4inch SAE steel flare male inlet and 1/4 inch SAE steel female flare outlet. Consult Parker for other sizes. • 500 psig design pressure (600 psig available on all models designed for R-410A applications with XH11 desiccant. • Extended copper ends available (select models). • Available with other desiccant combinations including charcoal and activated alumina (consult Parker). • Various inlet/outlet fitting combinations available. • U.L. listed SA3441, CSA certified LR46423. Model Series 030 050 080 160 300 410 750 R-12 (15 ppm) 75° F/ 125° F 79/76 162/157 245/237 476/461 835/808 1164/1127 1776/1720 R-22 R-134a R-401A/B (60 ppm) (150 ppm) 60 ppm) 75° F/ 75° F/125° F 75° F/125°F 125° F 71/66 78/74 76/69 147/135 160/153 157/142 222/205 243/231 237/215 430/398 471/448 461/418 755/698 826/786 808/733 1053/ 973 1151/1096 1127/1022 1607/1485 1757/1673 1720/1560 R-401C (60 ppm) 75° F/ 125° F 74/68 153/141 231/213 448/413 786/724 1096/1010 1673/1541 R-402A/B (60 ppm) 75° F/ 125° F 77/70 159/144 241/218 467/423 819/742 1142/1034 1743/1579 R-404A (50 ppm) 75° F/ 125° F 78/73 160/150 241/227 468/441 822/773 1145/1078 1748/1645 R-407A/B (50 ppm) 75° F/ 125° F 51/46 105/95 159/144 309/280 543/491 757/684 1156/1044 R-407C (50 ppm) 75° F/ 125° F 55/49 112/101 170/153 330/297 579/521 806/726 1231/1109 R-410A* R-502 R-507A (50 ppm) (30 ppm) (50 ppm) 75°F/ 75°F/ 75° F/ 125° F 125°F 125° F 42/37 73/68 78/73 86/77 149/141 161/151 131/117 226/213 244/228 254/226 438/413 473/443 446/397 769/724 830/777 622/554 1071/1010 1158/1084 949/846 1635/1541 1767/1654 Indoor Air Quality Steel Liquid Line Driers — Water Drop Capacity at ARI Conditions Thermostats NOTE: For R-410A applications, Parker recommends XH11 desiccant. See pages 9-11 for R-410A drier information. Heating Components Electrical Motors P4112 Compressors, Chillers, Condensers Refrigeration R-22 R-134a 1.92 5.60 7.97 8.87 26.73 37.33 71.32 1.74 5.07 7.21 8.02 24.17 33.75 64.48 1.76 5.13 7.30 8.12 24.47 34.17 65.29 R-401A/B R-401C 1.71 4.99 7.10 7.89 23.79 33.22 63.47 1.51 4.39 6.24 6.94 20.92 29.21 55.81 R-402A R-402B 1.59 4.62 6.58 7.31 22.04 30.78 58.81 1.42 4.31 6.10 6.28 20.43 28.53 55.62 R-404A R-407A 1.49 4.35 6.18 6.88 20.73 28.95 55.31 1.64 4.78 6.81 7.57 22.82 31.86 60.88 R-407B R-407C R-410A R-502 R-507A 1.46 4.44 6.27 6.46 21.01 29.34 57.20 1.45 4.38 6.20 6.38 20.75 28.98 56.49 1.52 4.42 6.28 6.99 21.07 29.42 56.21 1.76 5.12 7.28 8.10 24.42 34.10 65.15 1.50 4.35 6.19 6.89 20.77 29.00 55.41 Tools & Instruments R-12 K-374 Refrigeration Model Series 030 050 080 160 300 410 750 Accessories, Supplies & Commodities Refrigerant Holding Capacities for Steel Liquid Line Driers (in oz. of refrigerant @ 100° F) Oils & Chemicals *See Parker RAC-1 catalog pages 9-11 for R-410A specific driers and applications. Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 21 PARKER STEEL LIQUID LINE FILTER DRIERS (LLD SERIES) STEEL LIQUID LINE DRIER DIMENSIONS PART NO. 033000-0329 MODEL CONNECTIONS SYSTEM NO. CUTOUT I.D. O.D. LENGTH (C) (A) (B) 032S 1/4 3/8 2-9/16 DIAMETER OVERALL PART NO. (D) (in.) LENGTH (in.) 1-11/16 3.77 033000-032 032 1/4 SYSTEM CUTOUT LENGTH (B) (in.) 4-1/8 Accessories, Supplies & Commodities DIAMETER (C) (in.) 2-1/2 4.39 033000-052 052 1/4 4-3/4 2-1/2 4.39 033000-053 053 3/8 5-3/16 2-1/2 5.27 033000-082 082 1/4 5-5/8 2-1/2 1-11/16 052S 1/4 3/8 033000-0525 0525S 5/16 7/16 033000-0539 053S 3/8 1/2 2-1/2 033000-0829 082S 1/4 3/8 2-1/2 033000-0825 0825S 5/16 7/16 033000-0839 083S 3/8 1/2 2-1/2 5.27 033000-083 083 3/8 6-1/16 2-1/2 033000-0849 084S 1/2 5/8 2-1/2 5.41 033000-084 084 1/2 6-5/16 2-1/2 2-1/2 5.92 033000-162 162 1/4 6-5/16 2-1/2 033000-163 163 3/8 6-3/4 2-1/2 033000-1629 162S 1/4 3/8 033000-1625 1625S 5/16 7/16 033000-1639 163S 3/8 1/2 033070-1639 163S 033000-1649 164S 1/2 033000-1659 165S 5/8 033000-3039 303S 033070-3039 303S 033000-3049 033000-3059 3-1/4 4-1/8 4.39 5.27 5.92 2-1/2 5.92 5/8 2-1/2 6.06 033000-164 164 1/2 7 2-1/2 3/4 2-1/2 6.3 033000-165 165 5/8 7-1/4 2-1/2 3/8 1/2 3 8.86 033000-303 303 3/8 9-11/16 3 304S 1/2 5/8 3 9 033000-304 304 1/2 9-15/16 3 305S 5/8 3/4 3 9.24 033000-305 305 5/8 10-3/16 3 033000-3079 307S 7/8 1 3 9.3 033000-4149 414S 1/2 5/8 3-1/2 9.19 033000-413 413 3/8 9-7/8 3-1/2 033000-4159 415S 5/8 3/4 033000-4179 417S 7/8 1 033000-7569 756S 3/4 7/8 033000-7579 757S 7/8 1 033000-7599 759S 1-1/8 1-1/4 4-3/4 7-3/4 7-3/4 13-9/16 3 3-1/2 9.43 033000-414 414 1/2 10-1/8 3-1/2 3-1/2 9.49 033000-415 415 5/8 10-3/8 3-1/2 3-1/2 15.11 3-1/2 15.11 3-1/2 15.99 P4113 Tools & Instruments Refrigeration MODEL SAE FLARE NO. (A) 033000-0529 Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration K-375 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 22 033000-304 033000-3049 033000-305 033000-3059 033000-3079 033000-413 033000-414 033000-4149 033000-415 033000-4159 033000-4179 033000-7569 033000-7579 033000-7599 1.74 1.93 1.93 2.03 3.38 4.06 4.83 1.93 2.13 3.58 4.54 5.12 7.25 7.35 2.22 2.42 4.16 5.41 5.99 -- 1.75 1.95 1.95 2.04 3.40 4.08 4.86 1.95 2.14 3.60 4.57 5.15 7.29 7.39 2.24 2.43 4.18 5.45 6.03 -- 1.55 1.72 1.72 1.80 3.01 3.61 4.30 1.72 1.89 3.18 4.04 4.55 6.44 6.53 1.98 2.15 3.69 4.81 5.33 -- 1.14 1.27 1.27 1.34 2.23 2.67 3.18 1.27 1.40 2.35 2.99 3.37 4.77 4.83 1.46 1.59 2.74 3.56 3.94 -- 1.34 1.48 1.48 1.56 2.60 3.12 3.71 1.48 1.63 2.74 3.49 3.93 5.56 5.64 1.71 1.85 3.19 4.15 4.60 -- 1.10 1.22 1.22 1.29 2.14 2.57 3.06 1.22 1.35 2.27 2.88 3.25 4.59 4.65 1.41 1.53 2.63 3.43 3.80 -- 1.48 1.65 1.65 1.73 2.88 3.46 4.12 1.65 1.81 3.05 3.87 4.37 6.18 6.26 1.89 2.06 3.54 4.61 5.11 -- 1.19 1.32 1.32 1.39 2.31 2.78 3.31 1.32 1.46 2.45 3.11 3.51 4.96 5.03 1.52 1.65 2.84 3.70 4.10 -- 1.64 1.82 1.82 1.91 3.19 3.83 4.56 1.82 2.01 3.37 4.28 4.83 6.84 6.93 2.10 2.28 3.92 5.10 5.65 -- 1.67 1.86 1.86 1.95 3.25 3.90 4.64 1.86 2.04 3.43 4.36 4.92 6.96 7.05 2.13 2.32 3.99 5.20 5.75 -- 1.11 1.23 1.23 1.29 2.15 2.58 3.07 1.23 1.35 2.27 2.89 3.26 4.61 4.67 1.41 1.54 2.64 3.44 3.81 -- 1.10 1.23 1.23 1.29 2.15 2.57 3.06 1.23 1.35 2.27 2.88 3.25 4.60 4.66 1.41 1.53 2.64 3.43 3.80 -- 34 34 34 34 34 61 61 61 6.72 9.05 7.28 9.83 9.40 12.58 9.69 13.01 11.03 14.78 4.03 5.44 4.60 6.15 --- 8.15 8.83 11.40 11.75 13.38 4.89 5.57 -- 9.18 9.96 12.86 13.24 15.08 5.51 6.28 -- 9.24 10.02 12.94 13.32 15.17 5.54 6.32 -- 8.16 8.85 11.43 11.77 13.40 4.90 5.59 -- 6.04 6.55 8.46 8.71 9.92 3.63 4.13 -- 7.05 7.64 9.87 10.16 11.57 4.23 4.82 -- 5.82 6.31 8.15 8.39 9.55 3.49 3.98 -- 7.83 8.49 10.96 11.29 12.85 4.70 5.35 -- 6.28 6.81 8.80 9.06 10.32 3.77 4.30 -- 8.66 9.39 12.12 12.49 14.22 5.19 5.92 -- 8.81 9.56 12.34 12.71 14.47 5.29 6.03 -- 5.84 6.33 8.17 8.42 9.59 3.50 3.99 -- 5.82 6.31 8.15 8.40 9.56 3.49 3.98 -- 61 61 61 61 61 80 80 80 80 80 80 131 131 131 7.99 9.26 10.96 12.09 14.99 4.03 8.06 9.26 10.96 12.09 17.18 14.63 18.17 20.01 9.69 11.23 13.29 14.66 18.18 4.89 9.78 11.23 13.29 14.66 20.84 17.75 22.04 24.27 10.92 12.66 14.98 16.53 20.49 5.51 11.02 12.66 14.98 16.53 23.49 20.01 24.84 27.36 10.99 12.74 15.07 16.63 20.62 5.54 11.09 12.74 15.07 16.63 23.63 20.13 24.99 27.52 9.71 11.26 13.32 14.69 18.22 4.90 9.80 11.26 13.32 14.69 20.88 17.79 22.08 24.32 7.19 8.33 9.86 10.88 13.48 3.63 7.25 8.33 9.86 10.88 15.46 13.17 16.35 18.00 8.38 9.72 11.50 12.69 15.73 4.23 8.46 9.72 11.50 12.69 18.03 15.36 19.07 20.99 6.92 8.02 9.49 10.47 12.98 3.49 6.98 8.02 9.49 10.47 14.88 12.68 15.74 17.33 9.31 10.79 12.77 14.09 17.46 4.70 9.39 10.79 12.77 14.09 20.02 17.05 21.17 23.31 7.47 8.66 10.25 11.31 14.02 3.77 7.54 8.66 10.25 11.31 16.07 13.69 17.00 18.72 10.30 11.94 14.13 15.58 19.32 5.19 10.39 11.94 14.13 15.58 22.15 18.87 23.42 25.79 10.48 12.15 14.38 15.86 19.67 5.29 10.58 12.15 14.38 15.86 22.54 19.20 23.84 26.26 6.94 8.05 9.52 10.51 13.03 3.50 7.01 8.05 9.52 10.51 14.93 12.72 15.79 17.39 6.93 8.03 9.50 10.48 13.00 3.49 6.99 8.03 9.50 10.48 14.90 12.69 15.75 17.35 10.75 12.44 14.71 16.26 20.15 5.44 10.82 12.44 14.71 16.26 23.12 19.65 24.32 26.80 Motors 1.54 1.72 1.72 1.80 3.00 3.60 4.29 1.72 1.89 3.17 4.03 4.54 6.43 6.52 1.97 2.14 3.69 4.80 5.32 -- Electrical 1.70 1.84 1.84 2.05 3.32 3.96 4.74 1.84 2.12 3.46 4.45 5.02 7.14 7.21 2.19 2.40 4.03 5.30 5.94 -- Heating Components 1.27 1.41 1.41 1.48 2.47 2.97 3.54 1.41 1.56 2.62 3.32 3.75 5.30 5.37 1.63 1.77 3.04 3.96 4.38 -- Indoor Air Quality R-22 R-134a R-401A R-401B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A R-502 R-507A Thermostats 033000-303 033000-3039 033070-3039 R-12 Oils & Chemicals 033000-164 033000-1649 033000-165 033000-1659 032 032S 052 052S 0525S 053 053S 082 082S 0825S 083 083S 084 084S 162 162S 1625S 163 163S 163S (R-410A) 164 164S 165 165S 166 303 303S 303S (R-410A) 304 304S 305 305S 307S 413 414 414S 415 415S 417S 756S 757S 759S FILTER AREA 10 10 17 17 17 17 17 27 27 27 27 27 27 27 34 34 34 34 34 34 Tools & Instruments 033000-032 033000-0329 033000-052 033000-0529 033000-0525 033000-053 033000-0539 033000-082 033000-0829 033000-0825 033000-083 033000-0839 033000-084 033000-0849 033000-162 033000-1629 033000-1625 033000-163 033000-1639 033070-1639 MODEL NO K-376 Refrigeration PART NO Accessories, Supplies & Commodities PARKER STEEL LIQUID LINE FILTER DRIERS (LLD SERIES) Compressors, Chillers, Condensers Refrigeration Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 23 Refrigeration Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration PARKER BI-FLOW FILTER DRIERS — BF SERIES-M The “BF” Series bi-flow drier is designed specifically for heat pump or reverse cycle application. External check valves are not required since they are incorporated within the filter drier shell. The core design filters out contaminant particles down to 25 microns. KEY FEATURES AND BENEFITS • 100% copper sweat or nickel plated flare fittings. • Desiccant core provides reliable and effective removal of solid contaminants, acid and moisture. • Core is cushioned in fiber gaskets to protect core and to insure trouble-free performance. • Powder paint exterior coating surpasses 500 hour ASTM salt spray test and resists corrosion. • U.L. listed file SA3441, CSA certified LR46423 P4115 Bi-Flow Driers — DIMENSIONS MODEL Flare BF083 BF084 BF163 BF164 Sweat FITTING SIZE (in.) BF082S 1/4 BF083S BF084S 3/8 1/2 BF162S 1/4 BF163S BF164S 3/8 1/2 BF165S 5/8 SYSTEM CUTOUT LENGTH “A” 6.09 6.35 6.75 7.00 “D” “B” “C” 4.10 5.27 2.50 4.10 4.10 5.27 5.41 2.50 2.50 4.10 5.92 2.50 4.75 4.75 5.92 6.06 2.50 2.50 4.75 6.30 2.50 Refrigerant Holding Capacities for Bi-Flow Driers (in oz. of refrigerant @ 100° F) MODEL SERIES BF080 BF160 R-12 R-22 R-134a R-401A R-401B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A R-502 R-507A 8.17 9.54 7.39 8.63 7.48 8.74 7.27 8.49 7.27 8.49 6.39 7.47 6.74 7.87 6.87 8.03 6.34 7.40 6.97 8.14 7.07 8.26 6.98 8.16 6.44 7.52 7.46 8.72 6.34 7.41 Bi-Flow Drier Water Crop Capacity at ARI Conditions MODEL SERIES BF080 BF160 MODEL SERIES BF080 BF160 R-12 (15 ppm) 75° F/125° F 105/102 148/144 R-22 (60 ppm) 75° F/125° F 95/88 134/124 R-134a (150 ppm) 75° F/125° F 104/ 99 147/140 R-401A/B 50 ppm) 75° F/125° F 102/ 92 144/130 R-401C (50 ppm) 75° F/125° F 99/91 140/129 R-402A (50 ppm) 75° F/125° F 103/ 93 146/132 R-402B (50 ppm) 75° F/125° F 103/ 93 146/132 R-404A (50 ppm) 75° F/125° F 103/97 146/137 R-407A (50 ppm) 75° F/125° F 68/62 97/87 R-407B (50 ppm) 75° F/125° F 68/62 97/87 R-407C (50 ppm) 75° F/125°F 73/65 103/93 R-410A (50 ppm) 75° F/125° F 56/50 79/71 R-502 (50 ppm) 75° F/125° F 97/91 137/129 R-507A (50 ppm) 75° F/125° F 104/98 148/138 K-377 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 24 1.6 2.1 2.7 2.1 2.7 1.6 2.2 2.7 3.7 2.1 2.7 2.1 2.8 3.5 2.8 3.5 2.1 2.9 3.5 4.9 2.8 3.5 R-134a R-401A R-401B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A R-502 R-507A 1.9 2.6 3.2 2.6 3.2 1.9 2.6 3.2 4.5 2.6 3.2 2.2 2.9 3.6 2.9 3.6 2.2 3.0 3.6 5.1 2.9 3.6 2.2 2.9 3.6 2.9 3.6 2.2 3.0 3.6 5.1 2.9 3.6 1.9 2.6 3.2 2.6 3.2 1.9 2.6 3.2 4.5 2.6 3.2 1.4 1.9 2.4 1.9 2.4 1.4 2.0 2.4 3.3 1.9 2.4 1.7 2.2 2.8 2.2 2.8 1.7 2.3 2.8 3.9 2.2 2.8 1.4 1.8 2.3 1.8 2.3 1.4 1.9 2.3 3.2 1.8 2.3 1.9 2.5 3.1 2.5 3.1 1.9 2.5 3.1 4.3 2.5 3.1 1.5 2.0 2.5 2.0 2.5 1.5 2.0 2.5 3.5 2.0 2.5 2.0 2.7 3.4 2.7 3.4 2.0 2.8 3.4 4.8 2.7 3.4 2.1 2.8 3.5 2.8 3.5 2.1 2.9 3.5 4.9 2.8 3.5 1.4 1.8 2.3 1.8 2.3 1.4 1.9 2.3 3.2 1.8 2.3 1.4 1.8 2.3 1.8 2.3 1.4 1.9 2.3 3.2 1.8 2.3 Electrical PARKER COPPER SUCTION LINE DRIER (Cu SLD SERIES) Copper Suction Line Dryer Data Heating Components • High-acid solid core design. • Flow capacities from 1/6 through 2-1/2 tons. • Access valve to check system pressure or charge through. • Applications include refrigerators, freezers, ductless A/C and PTAC units. NOTE: Model Cu SLD 5/16 is 100% XH6 molecular sieve. Models Cu SLD-3S & 4S are 50% molecular sieve and 50% activated alumina. MAXIMUM FLOW RATE 401A/B 404A, 502, 507 PART NO DESCRIPTION 22/ 402 134a 031589-00 CuSLD 5/16 Copper Solid Core Suction Line Dryer CuSLD-3S Copper Solid Core Suction Line Dryer CuSLD-4S Copper Solid Core Suction Line Dryer 1/3 1/4 1/4 2-1/2 2 2-1/2 2 032104-00 032104-01 407A/B 410A 1/3 1/3 1/2 SYSTEM OA LENGTH (in) 5.31 CUTOUT LENGTH (in) 4.63 2 2 2-1/2 2-1/2 6.71 6.00 2 1-1/2 2-1/2 2-1/2 6.71 6.00 FITTING TYPE R-12 R-22 R-134a R-401A/B R-401C R-402A/B R-404A & SIZE CuSLD 5/16 Copper Solid 5/16 Sweat 69.4 62.8 68.7 67.2 65.4 68.1 68.3 Core Suction Line Dryer CuSLD-3S Copper Solid 3/8 Sweat 107.8 97.5 106.6 104.3 101.5 105.8 106 Core Suction Line Dryer CuSLD-4S Copper Solid 1/2 Sweat 107.8 97.5 106.6 104.3 101.5 105.8 106 Core Suction Line Dryer R-407A/B R-407C R-410A R-502 R-507A 45.2 48.1 37.1 63.9 69 70.1 74.7 57.6 99.2 107.2 70.1 74.7 57.6 99.2 107.2 Copper Suction Line Dryer Water Capacity in Drops at 75° F 031589-00 032104-00 032104-01 DESCRIPTION Tools & Instruments PART NO Indoor Air Quality R-22 Thermostats BF082S BF083S BF084S BF083 BF084 BF162S BF163S BF164S BF165S BF163 BF164 R-12 Oils & Chemicals 031653-01 031653-02 031653-03 031653-04 031653-09 031653-05 031653-06 031653-07 031653-11 031653-08 031653-10 FILTER AREA 10.4 10.4 10.4 10.4 10.4 14.4 14.4 14.4 14.4 14.4 14.4 Accessories, Supplies & Commodities MODEL NO K-378 Refrigeration PART NO Motors PARKER BI-FLOW FILTER DRIERS — BF SERIES Compressors, Chillers, Condensers Refrigeration Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 25 PARKER - STEEL SUCTION LINE FILTER DRIERS — “The Original SLD” Parker Hannifin developed and introduced the solid-core clean-up drier for use in a system suction line. The compact design incorporates a large outside diameter shell, which results in a shorter lay-in length, and a larger core, which provides a greater filtration area for maximum operating efficiency. The core material has controlled porosity which effectively removes and holds a maximum amount of contaminants with a minimum of pressure drop. In addition, the core material collects and holds inorganic acids and other harmful contaminants present after a motor burnout. The special binding process protects the core from acid decomposition. Access valves on both the inlet and outlet sides make it easy to measure pressure accurately. Occasionally, enough contaminant matter may collect in the filter core to cause a slight pressure drop. The access valves on the SLD make it easy to determine if a pressure drop exists and to measure the amount of the drop. Electrical Motors Compressors, Chillers, Condensers Refrigeration Refrigeration • 500 hours salt spray protection. • Shortest system cut-out lengths allow installation in tight areas. • Two access valves simplify pressure drop measurement. • Flare or solid copper sweat fittings. • UL listed - File No. SA3441. CSA listed LR46423. Steel Suction Line Drier Dimensions PART NO DESCRIPTION A OVERALL LENGTH (in) 031593-01 031593-03 031593-02 031593-04 031593-05 031593-14 031593-09 031593-06 031593-07 031593-08 031593-15 031593-10 031593-11 031593-12 031593-13 SLD 8-3VHH Steel Suction Line Filter Drier SLD 8-3SVHH Steel Suction Line Filter Drier SLD 8-4VHH Steel Suction Line Filter Drier SLD 8-4SVHH Steel Suction Line Filter Drier SLD 8-5SVHH Steel Suction Line Filter Drier SLD 8-6SVHH Steel Suction Line Filter Drier SLD 13-5VHH Steel Suction Line Filter Drier SLD 13-5SVHH Steel Suction Line Filter Drier SLD 13-6SVHH Steel Suction Line Filter Drier SLD 13-7SVHH Steel Suction Line Filter Drier SLD 13-9SVHH Steel Suction Line Filter Drier SLD 27-7SVHH Steel Suction Line Filter Drier SLD 27-9SVHH Steel Suction Line Filter Drier SLD 54-11SVHH Steel Suction Line Filter Drier SLD 54-13SVHH Steel Suction Line Filter Drier 5.13 4.31 5.38 4.44 4.66 4.72 5.82 4.91 4.97 4.97 5.72 6.97 7.72 12 12 Tools & Instruments Accessories, Supplies & Commodities Oils & Chemicals Thermostats Indoor Air Quality Heating Components KEY FEATURES AND BENEFITS • The original SLD®, solid core, activated alumina suction line filter drier. • High acid capacity. • Low pressure drop - exceptionally high flow rates. • Designed for system clean-up. K-379 B SYSTEM CUTOUT LENGTH (in) -3.13 -3.13 3.16 3.16 -3.45 3.45 3.47 3.47 5.47 5.36 9.17 9.17 SHELL DIAMETER (in) 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 26 Refrigeration Compressors, Chillers, Condensers PARKER - STEEL SUCTION LINE FILTER DRIERS — “The Original SLD” 168 168 168 168 168 168 284 284 284 284 284 568 568 1136 1136 168 168 168 168 168 168 284 284 284 284 284 568 568 1136 1136 R-401A & 410A R-502 & 507A 200 200 200 200 200 200 338 338 338 338 338 676 676 1352 1352 185 185 185 185 185 185 312 312 312 312 312 624 624 1248 1248 Heating Components R-22 & 404A R-134a & 407 Indoor Air Quality FILTER AREA 17.25 17.25 17.25 17.25 17.25 17.25 26 26 26 26 26 49 49 88 88 Accessories, Supplies & Commodities Oils & Chemicals Thermostats FITTING SIZE (in) DESICCANT (cu in) SLD 8-3VHH Steel Suction Line Filter Drier 3/8 SAE Flare 8 SLD 8-3SVHH Steel Suction Line Filter Drier 3/8 Sweat 8 SLD 8-4VHH Steel Suction Line Filter Drier 1/2 SAE Flare 8 SLD 8-4SVHH Steel Suction Line Filter Drier 1/2 Sweat 8 SLD 8-5SVHH Steel Suction Line Filter Drier 5/8 Sweat 8 SLD 8-6SVHH Steel Suction Line Filter Drier 3/4 Sweat 8 SLD 13-5VHH Steel Suction Line Filter Drier 5/8 SAE Flare 13-1/2 SLD 13-5SVHH Steel Suction Line Filter Drier 5/8 Sweat 13-1/2 SLD 13-6SVHH Steel Suction Line Filter Drier 3/4 Sweat 13-1/2 SLD 13-7SVHH Steel Suction Line Filter Drier 7/8 Sweat 13-1/2 SLD 13-9SVHH Steel Suction Line Filter Drier 1-1/8 Sweat 13-1/2 SLD 27-7SVHH Steel Suction Line Filter Drier 7/8 Sweat 27 SLD 27-9SVHH Steel Suction Line Filter Drier 1-1/8 Sweat 27 SLD 54-11SVHH Steel Suction Line Filter Drier 1-3/8 Sweat 54 SLD 54-13SVHH Steel Suction Line Filter Drier 1-5/8 Sweat 54 Tools & Instruments 031593-01 031593-03 031593-02 031593-04 031593-05 031593-14 031593-09 031593-06 031593-07 031593-08 031593-15 031593-10 031593-11 031593-12 031593-13 DESCRIPTION K-380 Refrigeration PART NO Electrical Motors Steel Suction Line Drier Water Drop Capacities at 65° F Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 27 Heating Components Electrical Motors Compressors, Chillers, Condensers Refrigeration PARKER - STEEL SUCTION LINE FILTER DRIERS — “The Original SLD” Steel Suction Line Drier Water Drop Capacities at 65° F Steel Suction Line Filter Dryer Ratings and Capacities Refrigerant Evaporator Temp Pressure Drop PSI R-22 40° F 20° F 0° F Indoor Air Quality Thermostats Oils & Chemicals -40° F 40° F R-134a 20° 0° F F -20° F 40° F 20° F R-404A -40° F 40° F R-407A & R-407C 20° -20° 0° F F F -40° F 0.5 3 2 1.5 1 0.5 2.0 1.5 1.0 0.5 3.0 2.0 1.5 1.0 0.5 3.0 2.0 1.5 1.0 1.1 0.8 0.6 0.4 0.2 0.7 0.6 0.5 0.4 1.0 0.7 0.5 0.3 0.3 1.1 0.8 0.6 0.4 0.2 SLD 8-3SV-HH 1.2 0.9 0.7 0.5 0.3 0.8 0.7 0.6 0.5 1.0 0.8 0.6 0.4 0.5 1.2 0.9 0.7 0.5 0.3 SLD 8-4V-HH 2.3 1.6 1.1 0.7 0.4 1.5 1.2 0.9 0.7 2.0 1.4 0.9 0.6 0.6 2.2 1.6 1.1 0.7 0.4 SLD 8-4SV-HH 2.6 1.8 1.2 0.8 0.5 1.7 1.4 1.0 0.8 2.3 1.5 1.0 0.6 0.8 2.5 1.8 1.2 0.8 0.5 SLD 8-5SV-HH 3.9 2.6 1.8 1.2 0.6 2.5 2.0 1.5 1.1 3.4 2.2 1.5 1.0 1.0 3.8 2.6 1.8 1.2 0.6 SLD 8-6SV-HH 4.2 2.8 1.9 1.3 0.6 2.7 2.1 1.6 1.2 3.6 2.4 1.6 1.0 1.0 4.1 2.8 1.9 1.3 0.6 SLD 13-5V-HH 4.1 2.7 2.0 1.3 0.8 2.6 2.0 1.7 1.2 3.6 2.3 1.6 1.0 1.3 4.0 2.7 2.0 1.3 0.8 SLD 13-5SV-HH 5.0 3.0 2.5 1.5 1.0 3.2 2.3 2.1 1.4 4.3 2.5 2.1 1.2 1.6 4.9 3.0 2.5 1.5 1.0 SLD 13-6SV-HH 7.0 4.5 3.0 2.0 1.0 4.5 3.4 2.5 1.9 6.1 3.8 2.5 1.6 1.6 6.8 4.5 3.0 2.0 1.0 SLD 13-7SV-HH 7.0 4.5 3.0 2.0 1.0 4.5 3.4 2.5 1.9 6.1 3.8 2.5 1.6 1.6 6.8 4.5 3.0 2.0 1.0 SLD 13-9SV-HH 7.2 4.6 3.1 2.1 1.0 4.6 3.5 2.6 2.0 6.3 3.9 2.5 1.7 1.6 7.0 4.6 3.1 2.1 1.0 SLD 27-7SV-HH 10.0 8.0 5.0 3.0 2.0 6.4 6.0 4.2 2.9 8.7 6.8 4.1 2.4 3.2 9.7 7.9 5.0 3.1 2.1 SLD 27-9SV-HH 13.0 9.0 6.0 4.0 2.0 8.3 6.8 5.1 3.8 11.3 7.6 4.9 3.2 3.2 12.7 8.3 6.0 4.1 2.1 SLD 54-11SV-HH 20.0 13.5 9.5 6.5 3.5 12.8 10.2 8.0 6.2 17.4 11.4 7.8 5.2 5.7 19.5 13.4 9.5 6.6 3.6 SLD 54-13SV-HH 23.0 16.0 11.0 7.0 4.0 14.7 12.1 9.3 6.7 20.0 13.5 9.0 5.6 6.5 22.4 15.8 11.1 7.1 4.1 R-407B Evaporator Temp 40° F 20° F Pressure Drop PSI 3.0 SLD 8-3V-HH 0.1 SLD 8-3SV-HH R-410A 0° -20° F F 20° F R-502 0° F 3 2 0.9 0.6 1.0 0.3 0.6 0.9 1.4 2.1 6.2 1.0 1.0 2.0 2.9 0° F -20° F -40° F 40° F 20° F -40° F 2.0 1.5 1.0 0.5 3.0 2.0 1.5 1.0 0.5 0.8 0.6 0.4 0.2 1.4 0.6 0.5 0.3 0.1 1.1 0.8 0.7 0.5 0.3 1.5 0.7 0.5 0.4 0.2 SLD 8-4V-HH 2.1 1.5 1.0 0.7 0.4 2.9 1.2 0.8 0.5 SLD 8-4SV-HH 2.4 1.7 1.1 0.8 0.5 3.2 1.4 0.9 SLD 8-5SV-HH 3.6 2.4 1.7 1.2 0.6 4.8 2.0 1.4 SLD 8-6SV-HH 3.9 2.6 1.8 1.3 0.6 5.2 2.1 SLD 13-5V-HH 3.8 2.5 1.9 1.3 0.8 5.1 SLD 13-5SV-HH 4.6 2.8 2.4 1.4 1.0 SLD 13-6SV-HH 6.5 4.2 2.9 1.9 SLD 13-7SV-HH 6.5 4.2 2.9 1.9 SLD 13-9SV-HH 6.7 4.3 2.9 SLD 27-7SV-HH 9.3 7.5 4.8 40° F 40° F 20° F R-507A 0° -20° F F -20° F -40° F 1.5 1 0.5 3 2 1.5 1 0.5 0.4 0.3 0.2 1.0 0.7 0.5 0.3 0.2 0.7 0.5 0.4 0.2 1.1 0.8 0.6 0.4 0.2 1.8 1.2 0.9 0.6 0.3 2.1 1.4 0.9 0.6 0.3 0.4 2.0 1.3 1.0 0.7 0.4 2.3 1.6 1.0 0.7 0.4 0.4 3.1 2.1 1.5 1.0 0.5 3.5 2.3 1.5 1.0 0.5 1.0 0.4 3.3 2.3 1.6 1.1 0.5 3.8 2.5 1.6 1.1 0.5 1.5 1.0 0.6 3.2 2.3 1.6 1.0 0.6 3.7 2.4 1.7 1.1 0.6 2.3 1.9 1.1 0.7 4.0 2.5 2.0 1.0 0.6 4.5 2.7 2.1 1.2 0.8 8.7 3.4 2.3 1.5 0.7 5.0 3.5 2.5 1.5 1.0 6.3 4.0 2.6 1.7 0.8 8.7 3.4 2.3 1.5 0.7 5.0 3.5 2.5 1.5 1.0 6.3 4.0 2.6 1.7 0.8 1.0 8.9 3.5 2.3 1.6 0.7 5.1 3.6 2.6 1.5 1.0 6.4 4.1 2.6 1.7 0.8 1.9 12.4 6.1 3.8 2.2 1.5 8.0 5.0 4.0 2.5 1.5 8.9 7.2 4.3 2.5 1.6 -40° F SLD 27-9SV-HH 12.1 8.5 5.7 3.9 1.9 16.1 6.9 4.5 3.0 1.5 10.0 7.0 5.0 3.0 2.0 11.6 8.1 5.1 3.3 1.6 SLD 54-11SV-HH 18.6 12.7 9.0 6.3 3.4 24.8 10.3 7.2 4.8 2.6 15.0 10.5 7.5 5.0 3.0 17.9 12.1 8.1 5.4 2.8 SLD 54-13SV-HH 21.4 15.1 10.5 6.7 3.9 28.5 12.2 8.3 5.2 2.9 18.0 12.5 9.0 6.0 3.0 20.6 14.3 9.4 5.8 3.2 Tools & Instruments Refrigeration 0° F -20° F SLD 8-3V-HH Refrigerant Accessories, Supplies & Commodities -20° F K-381 Sec#10i Refridge 52pages_Fridge 12/10/2010 5:08 PM Page 28 Refrigeration Compressors, Chillers, Condensers PARKER - REPLACEMENT DRYER SHELLS AND FILTER CORES A B 089021-01 089021-02 089021-09 089021-10 089021-13 089021-15 089021-16 089021-03 089021-04 089021-11 089021-12 089021-17 089021-18 089021-19 089021-05 089021-06 089021-14 089021-20 089021-07 089021-08 089021-21 P-485 Replaceable Core Filter Drier Shell P-487 Replaceable Cor