USAI® BeveLED® - USAI Lighting

USAI® BeveLED® - USAI Lighting
®
BeveLEDmini
PROJECT INFORMATION
Covered By US Patents 8,684,570 and 9,671,091
DATE
2221
PROJECT
DOWNLIGHT
TYPE
BeveLED mini Recessed Downlight - Good things come in small packages. BeveLED mini is the smallest member of the BeveLED family
with an aperture of only 3”, and is now available with more BeveLED trim finishes, innovative housings, and dimming driver options than ever before.
BeveLED mini is perfect for residential, hospitality, and corporate projects.
1” REGRESS DOWNLIGHT
DELIVERED PERFORMANCE
14 Watts
BeveLEDmini
DOWNLIGHT
1" Regress
1" Regress
20 Watts
90+
90+
80+
HIGH
80+
HIGH
CRI
CRI
CRI
CRI
61
50
51
42
1100
825
1500
1050
850
700
1100
900
2-Step MacAdam Ellipse
Color Rendering Index
Lumens per Watt
Source Lumens
Delivered Lumens
Color Consistency
Performance based on 3000K
CCT MULTIPLIER
2700K
Bevel Finish
Flange Finish
Color Rendering Index
Multiplier for
Lumen Output
3000K
80+
CRI
90+
HIGH
CRI
1.00
0.73
3500K 4000K
80+
CRI
90+
HIGH
CRI
80+
CRI
80+
CRI
1.00
.80
1.15
1.07
13⁄4"Ø
3"Ø
4"Ø
DEEP REGRESS DOWNLIGHT
DELIVERED PERFORMANCE (Projected)
14 Watts
BeveLEDmini
DOWNLIGHT
Color Rendering Index
Lumens per Watt
Source Lumens
Delivered Lumens
Color Consistency
Deep Regress
15⁄8" Regress
Performance based on 3000K
CCT MULTIPLIER
55º Cutoff
Bevel Finish
20 Watts
90+
90+
80+
HIGH
80+
HIGH
CRI
CRI
CRI
CRI
47
39
43
35
1100
825
1500
1050
675
550
850
700
2-Step MacAdam Ellipse
Color Rendering Index
Multiplier for
Lumen Output
2700K
80+
CRI
90+
HIGH
CRI
1.00
0.73
3000K
3500K 4000K
80+
CRI
90+
HIGH
CRI
80+
CRI
80+
CRI
1.00
.80
1.15
1.07
Flange Finish
13⁄4"Ø
3"Ø
4"Ø
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2013. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 06/15/2017
®
BeveLEDmini
2221
DOWNLIGHT
ORDERING INFORMATION
DEEP REGRESS
1”REGRESS
HOW TO SPECIFY
Ordering Example: Specify trim code and housing code to order: 2221W - B1- S - 10 - LRTD3 - 9020 - M2 - 27KS - 50 - NC1 - 277V - DIML2 - CB27
TRIM ORDERING INFORMATION
TRIM
2221
BEVEL STYLE
OPTION
LENS
–
______
FLANGE FINISH
–
–
1” REGRESS DOWNLIGHT
2221
Round
Downlight
1" Regress
W
TZ
Wet location 1
6” TechZone
ceiling compatible
(NCSL only)
N/A with 01 or 02
flange finishes.
2221
Round
Downlight
Deep
Regress
W
Wet location 1
01
02
10
13
21
28
RAL
B1 1" Regress Bevel, Painted S Solite
Die Cast Matches
(provided
Flange Finish
standard)
AB1 1" Regress Bevel,
F Frosted
Black Anodized
AC1 1" Regress Bevel,
Clear Matte Anodized
DEEP REGRESS DOWNLIGHT
Clear Matte (AC Bevel only)
Black Anodized (AB Bevel Only)
White
Statuary Bronze
Black
Metalized Grey
Custom Color
(specify RAL #)
B2 Deep Regress Bevel,
Painted Die Cast
Matches Flange Finish
AB2 Deep Regress Bevel,
Black Anodized
AC2 Deep Regress Bevel,
Clear Matte Anodized
1 Wet location, use with B1 and
B2 trims only.
HOUSING ORDERING INFORMATION
HOUSING CODE
WATTAGE
–
LRTD3
LRTD3
ENGINE
CODE
COLOR
– M2 –
9014 14W LED
9020 20W LED
M2
REFLECTOR
–
27KS
30KS
35KS
40KS
27KH
30KH
HOUSING TYPE
–
SELECT ONE
VOLTAGE
–
2700K, 80+ CRI
1” REGRESS DOWNLIGHT
FT BabyLED Flat Housing
3000K, 80+ CRI 25 25° beam
New Construction2
3500K, 80+ CRI 35 35° beam
FTIC
BabyLED
Flat Housing
4000K, 80+ CRI 50 50° beam
IC-Rated/Airtight2
2700K, 90+ CRI
(up to 14W maximum)
3000K, 90+ CRI
FTA BabyLED Flat
Adjustable Housing2
NCSL New Construction
Narrow Width2
NC1 New Construction,
all in one
CP Chicago Plenum2
IC Insulation-Contact
Rated / Airtight2
–
120V
277V
DEEP REGRESS DOWNLIGHT
See performance
chart for precise
lumen information.
USAI
Lighting
®
2 Step MacAdam
ellipse is standard
for all
www.usailighting.com
[email protected]
C20
20° beam
Comfort Cutoff
C30
30° beam
Comfort Cutoff
C40
40° beam
Comfort Cutoff
NC1 New Construction,
all in one
CP Chicago Plenum2
IC Insulation-Contact
Rated / Airtight2
120V
347V
2
N/A with EM
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
DIMMING DRIVER
OPTIONS
ACCESSORIES
–
For use with 120V or 277V
1” REGRESS DOWNLIGHT
DIML2 0-10V dim, 10%
CB27 27" C-Channel Bars 7
(provided standard)
CB52 52" C-Channel Bars 7
DIML4 Lutron A 3-wire/ECO, 1% 3
CM27 27” C-Channel Bars
DIML4E Lutron 5 ECO, 5% 3
(use with FT or FTIC housing only)
DIML4H Lutron H ECO, 1% Fade 3
CM52 52” C-Channel Bars
(use with FT or FTIC housing only)
DIML6A EldoLED 0-10V, 0.1%,
3
logarithmic / Lutron controls
EML Emergency battery 5
DIML6B EldoLED 0-10V, 0.1%,
EMLW Emergency battery,
3
linear controls
wet location 5
DIML6E EldoLED 0-10V, 1%,
TZ 6” TechZone ceiling
3
logarithmic/Lutron controls
compatible 6
DIML6F EldoLED 0-10V, 1%, linear
3
controls
DIML7 EldoLED DALI, 0.1% 3
DEEP REGRESS DOWNLIGHT
For use with 120V only
CB27 27” C-Channel Bars
DIML3 Lutron A 2-wire, 1%
CB52 52” C-Channel Bars
3
120V only
EML Emergency battery 5
DIML19 Phase 2-wire dimming,
EMLW Emergency battery,
1% 120V only
wet location 5
For use with 347V only
DIML15 0-10V dim, 1% 347 only3, 4
5 EM requires above ceiling access.
For use with NC1 housing only.
3
N/A with FT or FTIC housings
6
4
With NCSL housing only
N/A with FTA housing
7
Not available wit FT or FTIC housings
© 2013. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 06/15/2017
®
BeveLEDmini
2221
DOWNLIGHT
HOUSING INFORMATION
NC1, IC AND CP HOUSINGS BELOW ARE FOR USE WITH 1” REGRESS TRIMS & DEEP REGRESS TRIMS
New Construction Housing - NC1
IC / Airtight - IC
Chicago Plenum - CP
51/2"
71/2"
1"
1"
191/8"
6 /8"
7
8 /2"
1
101/8"
12"
151/2"
11/2"
175/8" (Plan View)
HOUSINGS BELOW ARE FOR USE WITH 1” REGRESS TRIMS ONLY (FT, FTIC, FTA AND NCSL ARE NOT AVAILABLE FOR USE WITH DEEP REGRESS)
BabyLED Flat Housing - FT
BabyLED Flat Adjustable- FTA
BabyLED Flat IC-Rated/Airtight - FTIC
(14W Maximum)
2”
1"
3”
2”
1"
4”
3”
1"
53/4”
53/4”
10”
107/8 (Plan View)
107/8 (Plan View)
141/2 (Plan View)
141/2 (Plan View)
141/2 (Plan View)
183/16 (Plan View)
55/8"
71/2"
Narrow Width - NCSL
61⁄2"
plenum
depth
required 5
4 /8"
for
service
Field
Rotatable 90°
115/8"
85/8"
/8”-11/2"
5
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2013. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 06/15/2017
2221
®
BeveLEDmini
DOWNLIGHT
SPECIFICATIONS
TRIM: 3” round aperture with a 1” regress or deep regress bevel and 1/2” flange, retained by two mounting clips. Die cast aluminum bevel is available
in white, statuary bronze, black, and metalized gray painted finishes, with flange painted to match. Also available in black or clear matte anodized
finishes, with self-finish or contrasting painted flange. Custom colors are available (provide RAL#). Trim is shipped with a solite lens provided standard.
Some examples of standard trim finish options for 2221 are shown below:
B1 - Painted Die Cast Trim
10 - White Bevel & Flange
B1 - Painted Die Cast Trim
13 - Statuary Bronze Bevel
& Flange
B1 - Painted Die Cast Trim
21 - Black Bevel & Flange
AB1 - Black Anodized Bevel
13 - Statuary Bronze Flange
AB1 - Black Anodized Bevel
28 - Metalized Grey Flange
AC2 - Clear Matte
Anodized Bevel
01 - Clear Matte Flange
B1 - Painted Die Cast Trim
28 - Metalized Grey Bevel
& Flange
AC2 - Clear Matte
Anodized Bevel
10 - White Flange
AC1 - Clear Matte
Anodozed Bevel
01 - Clear Matte Flange
AC1 - Clear Matte
Anodized Bevel
10 - White Flange
AB1 - Black Anodized Bevel
02 - Black Anodized Flange
AB2 - Black Anodized Bevel
02 - Black Anodized Flange
AB2 - Black Anodized Bevel
13 - Statuary Bronze Flange
AB2 - Black Anodized Bevel
28 - Metalized Grey Flange
FIELD REPLACEABLE LED LIGHT ENGINE: is serviceable through the aperture without tools. All USAI Lighting Classic White light engines feature
industry leading color consistency within a 2-Step MacAdam’s ellipse.
FIELD REPLACEABLE DIMMING DRIVER: 0-10V, 100%-10% solid state electronic constant current DIML2 dimming driver with a high power factor
provided standard and sources 2mA. Specify 120V or 277V. Driver complies with IEEEC62.41 surge protection. Multiple dimming driver options are
available; some on-time delay may be experienced, depending on control system used.
EMERGENCY: BeveLED mini emergency lighting battery pack requires above ceiling access for service. Fixtures are provided with a remote test
switch with a 24” lead length for location of the test switch. Bodine 17C provides 200mA for 90 minutes; delivers ~450 lumens. EMLW wet location
option is available with B1 or B2 trim only. EM option is available with NC1 housings only. Fixtures that have no USAI EM option may be connected to
an inverter (by others) for emergency lighting.
HOUSING: 1” regress fixture housing options are NC1, IC, CP, FT, FTIC, FTA and NCSL. DEEP regress fixture housing options are NC1, IC, and CP only.
FT, FTIC, FTA and NCSL housings are not available with DEEP regress trims. Fabricated of 20 ga. galvanized steel with thru wire J-box, 4 in 4 out at
min. 90°C, #12 AWG thru branch circuit wiring. NCSL housing is field rotatable 90° for best fit installation. NCSL with TZ option is compatible with 6”
TechZone ceiling systems. IC-rated housings for use with 14W light engines only are rated for direct contact with insulation of R-42 or less. IC-rated
housings for use with 20W light engines are rated for direct contact with insulation of R-30 or less. FT housing not for use with through-branch circuit
wiring.
MOUNTING: Butterfly brackets and adjustable nailer bars with integral nails provided. Nailer bars are extendible from 14” to 24” centers. C-channel
bars are optionally available for acoustical ceiling applications. If channel bars are specified for FT or FTIC housing, special reduced height channel
bars (CM27 or CM52) will be provided.
MAXIMUM CEILING THICKNESS: As noted on housing drawings.
CEILING CUT OUT: 3-1/2ӯ
NCSL: 3-5/8ӯ
WARRANTY: Based on IESNA LM80-2008, BeveLED Mini has a 50,000 hour rated life at 70% lumen maintenance (L70). USAI Lighting Warranty covers
replacement parts for 5 years from date of shipment.
LISTINGS: Dry/Damp. Wet location option available with B1 and B2 trims only. NRTL/CSA-US tested to UL standards. IBEW union made.
NOTES:
• Not for use in corrosive environment.
• Use of pressure washer voids warranty.
PHOTOMETRICS: Consult factory or website for IES files. Tested in accordance with IESNA LM79.
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2013. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 06/15/2017
DOWNLIGHT
®
BeveLEDmini
2221
DELIVERED PERFORMANCE
2221 / 2321 14W 30KS 25° 1” Regress
2221 / 2321 20W 30KS 25° 1” Regress
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2013. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 06/15/2017
DOWNLIGHT
®
BeveLEDmini
2221
DELIVERED PERFORMANCE
2221 / 2321 14W 30KS 35° 1” Regress
2221 / 2321 20W 30KS 35° 1” Regress
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2013. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 06/15/2017
DOWNLIGHT
®
BeveLEDmini
2221
DELIVERED PERFORMANCE
2221 / 2321 14W 30KS 50° 1” Regress
2221 / 2321 20W 30KS 50° 1” Regress
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2013. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 06/15/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D2 / DIML2
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D2 / DIML2 LED: 0-10V Dimming Driver Wiring (Dims down to 10%)
Manufacturer
120V / 277V
Crestron
Crestron
Crestron
Crestron
Crestron
Leviton
Lightolier (Philips)
Lutron
Product
D2 / DIML2 Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
iLux dimmer expansion module
DIN Rail dimmer
DIN Rail analog output module
8 Channel dimmer module
8 Channel dimmer module
IllumaTech dimmer
Vega
Diva
CLS-EXP-DIMFLV
DIN-4DIMFLV4
DIN-A08
GLX-DIMFLV8
GLXP-DIMFLV8
IP710-DLX
V2000FAMU
DVTV-XX
Qty Fixtures
Per Dimmer*
Use source current per
fixture specification
sheet to determine
number of fixtures per
dimmer. Max number
of fixtures is limited by
dimmer load rating.
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D2 / DIML2
0-10V DIMMING W/RELAY TO SWITCH POWER
FIXTURE
DIMMER: 0-10V
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GND
CLASS 2 CONTROL WIRES
LINE
RELAY
(BY OTHERS)
NEUTRAL
DIMMER: 0-10V w/
POWER SWITCHING
D2 / DIML2
0-10V DIMMING (NO RELAY)
FIXTURE
(BY OTHERS)
LINE
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GROUND
GND
NEUTRAL
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-2 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D3 / DIML3
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D3 / DIML3 LED: Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / LED Dimming Driver Wiring (Dims down to 1%) 120V
D3 / DIML3 Dimmer Compatibility Chart
Manufacturer
120V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Product
Part Number
Dimmed Light
Output Range
Sensor+ Cabinet
Unison DRd Cabinet
Maestro Wireless® 600W dimmer
Maestro Wireless® 1000W dimmer
HomeWorks® QS adaptive dimmer
HomeWorks® QS 600W dimmer
HomeWorks® QS 1000 W dimmer
Caseta Wireless® Pro 1000W dimmer
Stanza® dimmer
RadioRA® 2 adaptive dimmer
RadioRA® 2 1000 W dimmer
myRoom DIN power module
HomeWorks® QS wallbox power module
Homeworks® DIN power module
HomeWorks® wallbox power module
GRAFIK Eye® QS control unit
GRAFIK Eye® 3000 control unit
RPM-4U module
RPM-4A module
GP dimming panels
Ariadni CL 250W dimmer
Diva CL 250W dimmer
Grafik T CL or RF CL dimmer
Nova T CL 250W dimmer
ELV10
ELV10
MRF2-6ND-120MRF2-10ND-120HQRD-6NAHQRD-6NDHQRD-10NDPD-10NXDSZ-6NDRRD-6NARRD-10NDMQSE-4A1-D
HQRJ-WPM-6D-120LQSE-4A1-D
HWI-WPM-6D-120
QSGR-, QSGRJGRX-3100-, GRX-3500HW-RPM-4U-120, LP-RPM-4U-120
HW-RPM-4A-120, LP-RPM-4A-120
Various
AYCL-253PDVCL-253P-, DVSCCL-253PGT-250M-, GTJ-250MNTCL-250-
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100%-1%
100%-1%
100%-1%
100%-1%
Qty Fixtures Per Dimmer*
Fixture Wattage
39W and Less 40W - 80W
1 – 26
1 – 13
1 – 26
1 – 13
1–8
1–4
1 – 13
1–6
1–8
1–4
1–8
1–4
1 – 13
1–6
1 – 13
1–6
1–8
1–4
1–8
1–4
1–6
1–3
1–6
1–3
1 – 26
1 – 13
1–6
1–3
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1–8
1–4
1–8
1–4
1–8
1–4
1 – 10
1–5
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D3 / DIML3
2 WIRE PHASE DIMMING
FIXTURE
DIMMER: 2 WIRE PHASE
(BY OTHERS)
LED
LINE
SWITCHED HOT
NEUTRAL
GROUND
BLACK
WHITE
DRIVER
V+
RED
V-
BLACK
GREEN
GND
ONLY FOR SWITCHES WITH NEUTRAL
NEUTRAL
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-3 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D4 / DIML4
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%)
Manufacturer
120V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
277V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Product
D4 / DIML4 3-Wire Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
Sensor+ Cabinet
Unison DRd Cabinet
Nova T
Nova T
Nova
Nova
Vareo
Skylark
Diva
Ariadni
Vierti
Maestro
Maestro Wireless
RadioRA 2
HomeWorks QS
Interfaces
GP Dimming Panels
D20 Dimming module
D20F Dimming module
NTF-10NTF-103PNF-10NF-103PVF-10SF-10P-, SF-103PDVF-103P-, DVSCF-103PAYF-103PVTF-6AMAF-6AM-, MSCF-6AMMRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV
PHPM-3F-120, PHPM-3F-DV
Various
100% - 1%
100% - 1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
Sensor+ Cabinet
Unison DRd Cabinet
Nova T
Nova T
Nova
Nova
Skylark
Diva
Ariadni
Vierti
Maestro
Maestro Wireless
RadioRA 2
HomeWorks QS
Interfaces
GP Dimming Panels
D20 Dimming module
D20F Dimming module
NTF-10-277NTF-103P-277NF-10-277NF-103P-277SF-12P-277-, SF-12P-277-3
DVF-103P-277-, DVSCF-103P-277AYF-103P-277VTF-6AMAF-6AM-277-, MSCF-6AM-277MRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV
PHPM-3F-DV
Various
100% - 1%
100% - 1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–53
1–26
1–53
1–26
1–41
1 – 20
1–20
1 – 10
1–41
1 – 20
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–15
1–7
1–15
1–7
1–15
1–7
1–15
1–7
1–15
1–7
1–41
1 – 20
1–41
1 – 20
40W and Less 41W - 80W
1–53
1–26
1–53
1–26
1–44
1 – 22
1–33
1 – 16
1–44
1 – 22
1–33
1 – 16
1–33
1 – 16
1–33
1 – 16
1–44
1 – 22
1–33
1 – 16
1–20
1 – 10
1–33
1 – 16
1–33
1 – 16
1–33
1 – 16
1–88
1 – 44
1–88
1 – 44
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
DIML4 wiring diagrams continued on next page
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-4 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D4 / DIML4 Continued
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%)
D4 / DIML4
3 WIRE PHASE DIMMING
FIXTURE
DIMMER: 3 WIRE PHASE
(BY OTHERS)
CAP UNUSED
ECOSYS WIRES
DIMMED HOT
SWITCHED HOT
NEUTRAL
LINE
LED
PURPLE GRAY
PURPLE
ORANGE
BLACK
WHITE
GREEN
GROUND
DRIVER
V+
RED
V-
BLACK
GND
NEUTRAL
D4 / DIML4 LED: Lutron Hi-Lume A-Series LED Driver with EcoSystem Control / LED Dimming Driver Wiring (Dims down to
Manufacturer
120V / 277V
Lutron
Lutron
Lutron
Lutron
D4 / DIML4 EcoSystem Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
Product
PowPak dimming module
Energi Savr Node
GRAFIK Eye QS (120V ONLY)
Quantum
RMJ-ECO32-DV-B
QSN-1ECO-S, QSN-2ECO-S
QSGRJ-_E, QSGR-_E
Various
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–32
1 – 16
1–64
1 – 32
1–64
1 – 32
1–64
1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
D4 / DIML4
EcoSystem CONTROLS
ECOSYS BUS
E2
E1
E2
FIXTURE
E1
WALL CONTROL
(BY OTHERS)
LINE
NEUTRAL
CAP
UN-USED
ORANGE
WIRE
PURPLE GRAY
PURPLE
ORANGE
BLACK
WHITE
GREEN
LED
DRIVER
V+
RED
V-
BLACK
GND
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-4 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D4E / DIML4E and D4H /DIML4H
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D4E / DIML4E LED: Lutron 5 Series EcoSystem LED Driver / LED Dimming Driver Wiring (Dims down to 5%)
Manufacturer
120V / 277V
Lutron
Lutron
Lutron
Lutron
D4E / DIML4E EcoSystem Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
Product
PowPak dimming module
Energi Savr Node
GRAFIK Eye QS (120V ONLY)
Quantum
RMJ-ECO32-DV-B
QSN-1ECO-S, QSN-2ECO-S
QSGRJ-_E, QSGR-_E
Various
100%–5%
100%–5%
100%–5%
100%–5%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–32
1 – 16
1–64
1 – 32
1–64
1 – 32
1–64
1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
D4H / DIML4H LED: Lutron H Series EcoSystem LED Driver with Fade to Black (dims down to 1%)
Manufacturer
120V / 277V
Lutron
Lutron
Lutron
Lutron
D4H / DIML4H EcoSystem Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
Product
PowPak dimming module
Energi Savr Node
GRAFIK Eye QS (120V ONLY)
Quantum
RMJ-ECO32-DV-B
QSN-1ECO-S, QSN-2ECO-S
QSGRJ-_E, QSGR-_E
Various
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Fixture Wattage
39W and Less 40W - 80W
1–32
1 – 16
1–64
1 – 32
1–64
1 – 32
1–64
1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
D4E / DIML4E and D4H / DIML 4H
EcoSystem CONTROLS
ECOSYS BUS
E2
E1
E2
FIXTURE
E1
WALL CONTROL
(BY OTHERS)
LED
PURPLE GRAY
PURPLE
LINE
BLACK
NEUTRAL
WHITE
DRIVER
V+
RED
V-
BLACK
GREEN
GND
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-4EH Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D6A / DIML6A and D6E / DIML6E
D6B / DIML6B and D6F / DIML6F
®
USAI
Lighting
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D6A / DIML6A and D6E / DIML6E LED Dimming Compatibility Table
D6A / DIML6A and D6E / DIML6E are linearly programmed dimming drivers for use with logarithmic-style dimming controls (e.g., Lutron and others listed in the table below)
D6A / DIML6A = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1%
D6E / DIML6E = EldoLED ECOdrive 0-10V control dims from 100% to 1%
D6A / DIML6A and D6E / DIML6E Dimmer Compatibility Chart
Dimmed Light
Qty Fixtures
Manufacturer Product
Part Number
Output Range
Per Dimmer*
120V & 277V
DIML6A 6E Refer to manufacturer's
Lutron
Diva
DVTV/NFTV/NTFTV with PP-20
99% - 0.1% 1% dimmer load rating for
Lutron
Energi Savr Node
QSN-4T16-S
100% - 0.1% 1% maximum and minimum
Lutron
GP Dimming Panels TVM2 Module
99% - 0.1% 1% fixture quantities per
Lutron
Interfaces
GRX-TVI w/ GRX3503
100% - 0.1% 1% dimmer.
Sensor Switch nIO
nIO EZ
100% - 0.1% 1% Enlighted compatible.
enlighted
Control Unit
CU-3E-1R
100% - 0.1% 1%
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D6B / DIML6B and D6F / DIML6F LED Dimming Compatibility Table
D6B / DIML6B and D6F / DIML6F are logarithmic-programmed dimming drivers for use with linear-style dimming controls (e.g., Crestron, non-Lutron and others listed in
the table below)
DIMMER:SOLOdrive
0-10V
D6B / DIML6B = EldoLED
0-10V control dims from 100% to 0.1%
(BY OTHERS)
D6F / DIML6F = EldoLED ECOdrive 0-10V control dims from 100% to 1%
LED
0-10V (-)
GRAY
D6B / DIML6B and D6F / DIML6F Dimmer Compatibility Chart
0-10V (+)
PURPLE
Dimmed Light
Qty Fixtures
V+
RED
SWITCHED HOT
SWITCHED
HOTNumber DRIVER
Manufacturer
Product
Part
Output Range
Per Dimmer*
VBLACK
NEUTRAL
WHITE
120V & 277V
DIML6B 6F Refer to
GREEN 2112U-101
Bush-Jaeger
Electronic potentiometer
100% - 0.1% 1% manufacturer's
Jung
Electronic potentiometer
100% - 0.1% 1% dimmer load
GND 240-10
CLASS 2 CONTROL WIRES
Leviton
IllumaTech dimmer
IP710-DLX
100% - 0.1% 1% rating for
LINE
Lightolier
(Philips) Momentum (120V ONLY)
ZP600FAM120
100% - 0.1% 1% maximum and
RELAY
Merten
Electronic
potentiometer
5729
100% - 0.1% 1% minimum fixture
(BY OTHERS)
DIML6A,
6B
Pass & Seymour Titan
CD4FB-W
100% - 0.1% 1% quantities per
NEUTRAL
TO SWITCH POWER
Watt Stopper
Miro 0-10V DIMMING W/RELAY
DCLV1
100% - 0.1% 1% dimmer.
Synergy
Wallbox Dimmers
ISD BC
100% - 0.1% 1% Enlighted
ABB
i-bus
SD/S 2.16.1
100% - 0.1% 1% compatible.
Crestron
Modules
GLX-DIMFLV8, GLXP-DIMFLV8
100% - 0.1% 1%
Crestron
Green Light
GLPAC-DIMFLV4-, GLPAC-DIMFLV8100% - 0.1% 1%
DIML6A, 6B
0-10V (-)
Crestron
Green Light Power Pack
GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM,
GLPP-1DIMFLV3EX-PM
100% - 0.1% FIXTURE
1%
0-10V DIMMING
W/RELAY TO GRAY
SWITCH POWER
0-10V (+)
PURPLE
DIMMER: 0-10V
Crestron
DIN Rail Analog Output Module
DIN-A08
100% - 0.1% 1% V+ RED
SWITCHED HOT
BLACK
Crestron
DIN Rail 0-10V Fluorescent Dimmer
DIN-4DIMFLV4
100% - 0.1% 1% LEDV- BLACK
NEUTRAL
WHITE
GREEN
Crestron
iLux 0-10V Dimmer Expansion Module CLS-EXP-DIMFLV
100% - 0.1% 1%
DRIVER
GND
enlighted
Control Unit
CU-3E-1R
100% - 0.1% 1%
CLASS 2 CONTROL WIRES
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and
LINEcircuit details.
(BY OTHERS)
RELAY
(BY OTHERS)
DIMMING DRIVER WIRING SCHEMES:
NEUTRAL
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
D6 / DIML6
0-10V DIMMING W/RELAY TO SWITCH POWER
D6 / DIML6
0-10V DIMMING (NO RELAY)
FIXTURE
DIMMER: 0-10V
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
(BY OTHERS)
LINE
GREEN
GROUND
GND
CLASS 2 CONTROL WIRES
LINE
FIXTURE
DIMMER: 0-10V w/
POWER SWITCHING
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
GREEN
GND
RELAY
(BY OTHERS)
NEUTRAL
NEUTRAL
USAI
Lighting
®
www.usailighting.com
DIML6A, 6B
[email protected]
1126 River Road
New Windsor, NY 12553
0-10V DIMMING (NO RELAY)
DIMMER: 0-10V w/
POWER SWITCHING
(BY OTHERS)
FIXTURE
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-6 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D7 / DIML7
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D7 / DIML7 LED: EldoLED DALI Dimming Driver Wiring (Dims down to 0.1%)
D7 / DIML7
DALI CONTROLS
DALI BUS
DA
DA
FIXTURE
WALL CONTROL
(BY OTHERS)
LINE
NEUTRAL
LED
ORANGE (-)
ORANGE/WHITE (+)
BLACK
WHITE
GREEN
DRIVER
V+
RED
V-
BLACK
GND
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-7 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D15 / DIML15
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D15 / DIML15 LED: 0-10V, 347V Dimming Driver Wiring (Dims down to 1%) 347V Only
Manufacturer
347
Acuity
Douglas Lighting
Hubbell
Leviton
Leviton
Lutron
Lutron
Product
D15 / DIML15 Dimmer Compatibility Chart
Dimmed Light
Output Range
Synergy ISD-BC
WPN-5721, WPN-5822
Light Hawk2 LHD-IRS3-N347-xx
Illumatech IP710-DLZ with 347V relay
Centura Fluorescent Control System
Nova NFTV-* dimmer plus 347V relay
Diva DVTV-* dimmer plus 347V relay
Qty Fixtures
Per Dimmer*
Use source current per
fixture specification
sheet to determine
number of fixtures per
dimmer. Max number
of fixtures is limited by
dimmer load rating.
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D15 / DIML15
0-10V DIMMING W/RELAY TO SWITCH POWER
FIXTURE
DIMMER: 0-10V
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GND
CLASS 2 CONTROL WIRES
LINE
RELAY
(BY OTHERS)
NEUTRAL
DIML2
0-10V DIMMING (NO RELAY)
FIXTURE
DIMMER: 0-10V w/
POWER SWITCHING
(BY OTHERS)
LINE
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
USAI
Lighting
NEUTRAL
DRIVER
RED
V-
BLACK
GREEN
GROUND
®
LED
V+
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
GND
T 845–565–8500
F 845–561–1130
NOTE:
Quickship fixtures are shipped prewired for
0-10V dimming controls. If switched, nondimming operation is desired, cap off purple
and gray wires separately at installation. Do
NOT cap purple and gray wires together.
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-15 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D19 / DIML19
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D19 / DIML19 LED: Hatch XTC series or equivalent - Forward and Reverse Phase Dimming Driver.
Dims down to 1% contingent upon dimmer specification and load. 120V only.
D19 / DIML19
2 WIRE PHASE DIMMING
FIXTURE
DIMMER: 2 WIRE PHASE
(BY OTHERS)
LED
LINE
SWITCHED HOT
NEUTRAL
GROUND
BLACK
DRIVER
WHITE
V+
RED
V-
BLACK
GREEN
GND
ONLY FOR SWITCHES WITH NEUTRAL
NEUTRAL
D19 / DIML19 Dimmer Compatibility Chart
120V ONLY
Forward Phase / TRIAC Dimming
Manufacturer
Product
Qty Fixtures Per Dimmer
Leviton
IPL06-10Z
Use fixture wattage per
6613-xxx
fixture specification
Lutron
S-600P
sheet to determine
S-603P
number of fixtures
DV-600P
per dimmer. Max number
DV-603P
of fixtures is limited by
DVSC-603P
dimmer load rating.
CT-600P
CT-603P
120V ONLY
Reverse Phase / ELV Dimming
Manufacturer
Product
Leviton
6615
IPE04-xxx
Lutron
NTELV-300
NTELV-600
SELV-300P
SELV-303P
DVELV-300P
DVELV-303P
USAI
Lighting
®
www.usailighting.com
[email protected]
Qty Fixtures Per Dimmer
Use fixture wattage per
fixture specification
sheet to determine
number of fixtures
per dimmer. Max number
of fixtures is limited by
dimmer load rating.
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-19 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D2 / DIML2
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D2 / DIML2 LED: 0-10V Dimming Driver Wiring (Dims down to 10%)
Manufacturer
120V / 277V
Crestron
Crestron
Crestron
Crestron
Crestron
Leviton
Lightolier (Philips)
Lutron
Product
D2 / DIML2 Dimmer Compatibility Chart
Dimmed Light
Part Number
Output Range
iLux dimmer expansion module
DIN Rail dimmer
DIN Rail analog output module
8 Channel dimmer module
8 Channel dimmer module
IllumaTech dimmer
Vega
Diva
CLS-EXP-DIMFLV
DIN-4DIMFLV4
DIN-A08
GLX-DIMFLV8
GLXP-DIMFLV8
IP710-DLX
V2000FAMU
DVTV-XX
Qty Fixtures
Per Dimmer*
Use source current per
fixture specification
sheet to determine
number of fixtures per
dimmer. Max number
of fixtures is limited by
dimmer load rating.
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
D2 / DIML2
0-10V DIMMING W/RELAY TO SWITCH POWER
FIXTURE
DIMMER: 0-10V
(BY OTHERS)
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GND
CLASS 2 CONTROL WIRES
LINE
RELAY
(BY OTHERS)
NEUTRAL
DIMMER: 0-10V w/
POWER SWITCHING
D2 / DIML2
0-10V DIMMING (NO RELAY)
FIXTURE
(BY OTHERS)
LINE
0-10V (-)
GRAY
0-10V (+)
PURPLE
SWITCHED HOT
BLACK
NEUTRAL
WHITE
LED
DRIVER
V+
RED
V-
BLACK
NOTE:
If switched, non-dimming operation is desired,
cap off purple and gray wires individually at
installation. Do NOT cap purple and gray wires
together.
GREEN
GROUND
GND
NEUTRAL
USAI
Lighting
®
www.usailighting.com
[email protected]
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-2 Revised 03/22/2017
DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
D19 / DIML19
®
USAI
Lighting
DIMMING DRIVER WIRING SCHEMES:
NOTES:
Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are
not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
IMPORTANT SAFETY INSTRUCTIONS
- SAVE THESE INSTRUCTIONS
1. Keep these instructions in a safe place for future reference.
2. Only qualified electricians in accordance to local codes should install these fixtures.
3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing.
4. Make sure all connections are in accordance with the National Electrical Code and any local regulations.
5. Cap any wires not used separately (not together).
D19 / DIML19 LED: Hatch XTC series or equivalent - Forward and Reverse Phase Dimming Driver.
Dims down to 1% contingent upon dimmer specification and load. 120V only.
D19 / DIML19
2 WIRE PHASE DIMMING
FIXTURE
DIMMER: 2 WIRE PHASE
(BY OTHERS)
LED
LINE
SWITCHED HOT
NEUTRAL
GROUND
BLACK
DRIVER
WHITE
V+
RED
V-
BLACK
GREEN
GND
ONLY FOR SWITCHES WITH NEUTRAL
NEUTRAL
D19 / DIML19 Dimmer Compatibility Chart
120V ONLY
Forward Phase / TRIAC Dimming
Manufacturer
Product
Qty Fixtures Per Dimmer
Leviton
IPL06-10Z
Use fixture wattage per
6613-xxx
fixture specification
Lutron
S-600P
sheet to determine
S-603P
number of fixtures
DV-600P
per dimmer. Max number
DV-603P
of fixtures is limited by
DVSC-603P
dimmer load rating.
CT-600P
CT-603P
120V ONLY
Reverse Phase / ELV Dimming
Manufacturer
Product
Leviton
6615
IPE04-xxx
Lutron
NTELV-300
NTELV-600
SELV-300P
SELV-303P
DVELV-300P
DVELV-303P
USAI
Lighting
®
www.usailighting.com
[email protected]
Qty Fixtures Per Dimmer
Use fixture wattage per
fixture specification
sheet to determine
number of fixtures
per dimmer. Max number
of fixtures is limited by
dimmer load rating.
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2016. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-264-19 Revised 03/22/2017
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement