Cisco | WS-C3560CG-8TC-S | Datasheet | Cisco WS-C3560CG-8TC-S network switch

Data Sheet
Cisco Catalyst 3560-C and 2960-C Series Compact Switches
®
®
The Cisco Catalyst 3560-C and 2960-C Series Compact Switches are small form-factor Fast Ethernet
and Gigabit Ethernet switches designed for deployments outside the wiring closet. Enterprise and
commercial customers can deliver advanced security services, unified communications, wireless, IP video
cameras, and other applications for the office workspace, micro branch office, classroom, cruise ship, and
other wiring-constrained environments.
The Cisco Catalyst 3560-C and 2960-C series compact switches are shown in Figure 1.
Cisco Catalyst 3560-C and 2960-C Series highlights:
●
PoE pass-through. An innovative feature and industry first for passing power from the compact switch to end
devices.
●
Media Access Control Security (MACsec) hardware-based encryption.
●
Power over Ethernet Plus (PoE+) up to 30 W per port.
●
USB and Console port for file backup, distribution, and simplified operations.
●
Fanless for silent operation.
●
Enhanced limited lifetime hardware warranty (E-LLW) with next business day (NBD) advance hardware
replacement and 90 day access to Cisco Technical Assistance Center (TAC) support.
Figure 1.
Cisco Catalyst 3560-C and 2960-C Series Compact Switches
Cisco Borderless Networks and Access Switching
Borderless Networks, a Cisco next-generation architecture, deliver the new workspace experience, connecting
anyone, anywhere, using any device, to any resource - securely, reliably, transparently. The Cisco Borderless
Networks architecture addresses primary IT and business challenges to help create a truly borderless experience by
bringing interactions closer to the employee and customer. Innovations in switching help organizations deliver ease
of operation, green efficiency, security, and performance to accelerate the way IT delivers and scales those services
on the network. Figure 2 depicts the Cisco Borderless Network benefits.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 1
Data Sheet
Figure 2.
Cisco Borderless Network Benefits
Cisco Borderless Networks Primary Capabilities
●
Sustainability: PoE pass-through to provide PoE to downlink ports using PoE or PoE+ switches in the wiring
closet; Cisco EnergyWise to measure, report, and reduce energy usage across the entire organization
●
Operational excellence: Cisco Catalyst Smart Operations
●
Secure business: Intelligent features at the network edge for sophisticated access control lists (ACLs) and
identity services with a wide range of authentication methods, data encryption, and Network Admission
Control (NAC)-based technology
●
Workspace experience: Network control and bandwidth optimization for granular rate limiting, ACLs, and
multicast video services
Switch Configurations
Table 1 shows the configuration information for the Cisco Catalyst 3560-C and 2960-C series compact products.
Table 1.
Configurations of Cisco Catalyst 3560-C and 2960-C series compact Switches
Switch Model
Uplinks
Description
WS-C2960CPD-8TT-L
2 10/100/1000 PoE input ports
Cisco Catalyst 2960-C PSE Switch 8 FE, 2 x 1G, PoE+ LAN Base
WS-C2960CPD-8PT-L
2 10/100/1000 PoE input ports
Cisco Catalyst 2960-C PD PSE Switch 8 FE PoE, 2 x 1G, PoE+ LAN Base
WS-C2960CG-8TC-L
2 dual-purpose port
(10/100/1000 or SFP)
Cisco Catalyst 2960-C Switch 8 GE, 2 x Dual Purpose Uplink, LAN Base
WS-C3560CG-8TC-S
2 dual-purpose port
(10/100/1000 or SFP)
Cisco Catalyst 3560-C Switch 8 GE, 2 x Dual Purpose Uplink, IP Base
WS-C3560CG-8PC-S
2 dual-purpose port
(10/100/1000 or SFP)
Cisco Catalyst 3560-C Switch 8 GE PoE, 2 x Dual Purpose, IP Base
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 15
Data Sheet
Cisco Catalyst 3560-C and 2960-C Compact Series Software
The Cisco Catalyst 3560-C Series Compact Switches come IP Base and the Cisco Catalyst 2960-C Series Compact
Switches come with LAN Base, neither switch can be upgraded.
The LAN Base feature set offers enhanced intelligent services that includes comprehensive Layer 2 features.
The IP Base feature set provides baseline enterprise services in addition to all LAN Base features. IP Base also
includes the support for routed access, MACSec, and OSPF.
Cisco Networked Sustainability: Good for Business, Better for Environment
Together, Cisco EnergyWise technology and Cisco Catalyst Compact switches enable greenhouse gas (GhG)
emissions reduction, increased energy cost savings, and sustainable business behavior.
●
PoE pass-through gives the ability to power PoE end devices through drawing PoE from the wiring closet.
The Cisco Catalyst 2960CPD-8PT-L has eight 10/100 ports with two PoE or PoE+ input ports to allow it to
be powered by another switch. This switch does not need a power supply and receives power over the uplink
from an upstream PoE device, providing deployment flexibility and availability. It is ideal for wiring and spaceconstraint applications.
●
Cisco EnergyWise is an innovative architecture, added to the Cisco Catalyst 3560-C and 2960-C series
compact switches, that enables the measurement of power consumption in the network infrastructure and
network-attached devices. EnergyWise encompasses a highly intelligent network-based approach to
communicate messages that measure and control energy between network devices and endpoints. The
network discovers Cisco EnergyWise-manageable devices, monitors their power consumption, and takes
action based on business rules to reduce power consumption.
●
Efficient switch operation: Cisco Catalyst 3560-C and 2960-C series compact switches use hardware
components created by Cisco providing optimum power saving, low-power operations for industry best-inclass power management, and power consumption capabilities. The Cisco Catalyst 3560-C ports are capable
of reduced power modes so that ports not in use can move into a lower power utilization state.
●
IEEE 802.3at or PoE+ available on the Cisco Catalyst 3560-C is the latest in PoE technology, allowing
capable devices to be powered with power output up to 30 watts per port. Table 2 outlines switch models and
power capacity for the Cisco Catalyst 3560-C and 2960-C series compact switches.
Table 2.
Switch PoE and PoE+ Power Capacity
Switch Model
Powering Options
Available POE Power(W)
WS-C2960CPD-8PT-L
1 P0E Uplink
0
WS-C2960CPD-8PT-L
2 PoE Uplinks
7
WS-C2960CPD-8PT-L
1 PoE+ Uplinks
7
WS-C2960CPD-8PT-L
1 POE+ and 1 POE Uplinks
15.4
WS-C2960CPD-8PT-L
2 PoE+ Uplinks
22.4
WS-C2960CPD-8PT-L
Auxiliary Input
22.4
WS-C3560CG-8PC
Internal Power Supply
124
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 15
Data Sheet
Cisco Operational Excellence: Reducing Operating Costs
Cisco Catalyst 3560-C and 2960-C series compact switches make deployment easy: reduce switch installation,
configuration, troubleshooting time, and operational costs.
●
Cisco Catalyst Smart Operations is a set of features to enhance operational excellence
◦
®
Cisco Smart Install is a transparent plug-and-play technology to configure the Cisco IOS Software image
and switch configuration without user intervention. Smart Install utilizes dynamic IP address allocation and
the assistance of other switches to facilitate installation, providing transparent network plug and play.
◦
Cisco Auto SmartPorts provides automatic configuration as devices connect to the switch port, allowing
autodetection and plug and play of the device onto the network. It configures the port with predefined
configurations encapsulating years of Cisco networking expertise, including security, IP telephony,
availability, QoS, and manageability features with minimal effort and expertise.
◦
Cisco Smart Configuration provides a single point of management for a group of switches and in addition
adds the ability to archive and back up configuration files to a file server or switch. A group of switches can
be upgraded or configured from a single point in the network.
◦
USB file storage and console for file backup, distribution, and simplified operations allow the user to back
up and boot from a USB device and allow for Mini USB console access along with traditional RS-232
console connectivity.
◦
Cisco Smart Troubleshooting is an extensive array of debug diagnostic commands and system health
checks within the switch including Generic Online Diagnostics (GOLD).
●
Easy-to-Use Deployment and Control Features
◦
Automatic QoS (AutoQoS) simplifies QoS configuration in voice over IP (VoIP) networks by issuing
interface and global switch commands to detect Cisco IP phones, classify traffic, and help enable egress
queue configuration.
◦
Dynamic Host Configuration Protocol (DHCP) autoconfiguration of multiple switches through a boot
server eases switch deployment.
◦
Auto-Negotiation on all ports automatically selects half- or full-duplex transmission mode to optimize
bandwidth.
◦
Dynamic Trunking Protocol (DTP) facilitates dynamic trunk configuration across all switch ports.
◦
Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel groups or
®
Gigabit EtherChannel groups to link to another switch, router, or server.
◦
Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that
conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP.
◦
Automatic Media-Dependent Interface Crossover (MDIX) automatically adjusts transmit and receive
pairs if an incorrect cable type (crossover or straight-through) is installed.
◦
Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow unidirectional links caused
by incorrect fiber-optic wiring or port faults to be detected and disabled on fiber-optic interfaces.
◦
Switching Database Manager (SDM) templates for access, routing, and VLAN deployment allow the
administrator to easily maximize memory allocation to the desired features based on deployment-specific
requirements.
◦
Local Proxy Address Resolution Protocol (ARP) works in conjunction with Private VLAN Edge to
minimize broadcasts and maximize available bandwidth.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 15
Data Sheet
◦
Internet Group Management Protocol (IGMP) Snooping for IPv4 and IPv6 MLD v1 and v2 Snooping
provide fast client joins and leaves of multicast streams and limit bandwidth-intensive video traffic to only
the requestors.
◦
Multicast VLAN Registration (MVR) continuously sends multicast streams in a multicast VLAN while
isolating the streams from subscriber VLANs for bandwidth and security reasons.
◦
Per-port Broadcast, Multicast, and Unicast Storm Control prevents faulty end stations from degrading
overall systems performance.
◦
Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier
administration and troubleshooting.
◦
Cisco VLAN Trunking Protocol (VTP) supports dynamic VLANs and dynamic trunk configuration across
all switches.
◦
Remote Switch Port Analyzer (RSPAN) allows administrators to remotely monitor ports in a Layer 2
switch network from any other switch in the same network.
◦
For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON)
software agent supports four RMON groups (history, statistics, alarms, and events).
◦
Layer 2 Traceroute eases troubleshooting by identifying the physical path that a packet takes from source
to destination.
◦
Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by
downloading from a centralized location.
◦
Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches.
Advanced, Intelligent Network Management Tools
The Cisco Catalyst 3560-C and 2960-C Series Compact Switches offer both the traditional Cisco CLI for detailed
configuration and Cisco Network Assistant software, a PC-based tool for quick configuration based on preset
templates. In addition, CiscoWorks LAN Management Solution (LMS) supports the Cisco Catalyst 3560-C and 2960C Series Compact Switches for networkwide management.
CiscoWorks LAN Management Solution
CiscoWorks LAN Management Solution (LMS) is a comprehensive network lifecycle management solution. It
provides an extensive library of easy-to-use features to automate the initial and day-to-day management of your
Cisco network infrastructure. CiscoWorks LMS uniquely uses Cisco hardware and software platform knowledge and
operational experience into a powerful set of workflow-driven configuration, monitoring, troubleshooting, reporting,
and administrative tools. Including:
●
Support for new Cisco hardware platforms the day they ship
●
Support for new technologies and services from initial deployment to day-to-day administration and
management, such as EnergyWise, Identity, Cisco Auto Smartports, Cisco Smart Install, and much more
●
Configuration management tools built from Cisco experience and Cisco Validated Design recommendations
●
Monitoring and troubleshooting capabilities that incorporates Cisco hardware best practices and diagnostics
features
●
Automation in managing hardware inventories, security vulnerabilities (PSIRTS), and platform end-of-life and
support cycles
●
For detailed information about CiscoWorks LMS, go to
http://www.cisco.com/en/US/products/sw/cscowork/ps2425/index.html.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 15
Data Sheet
Enhanced Work Space Experience for End Users
Borderless Security
The Cisco Catalyst Compact Series Switches provide superior Layer 2 threat defense capabilities for mitigating manin-the-middle attacks (such as MAC, IP, and ARP spoofing). TrustSec, a primary element of Borderless Security
Architecture, helps enterprise customers secure their networks, data and resources with policy-based access
control, identity and role-aware networking, pervasive integrity, and confidentiality.
The borderless security is enabled by the following feature sets in the Cisco Catalyst 3560-C and 2960-C Compact
Series Switches:
●
Threat defense
●
Cisco TrustSec
●
Other advanced security features
Threat Defense
Cisco Integrated Security Features is an industry-leading solution available on Cisco Catalyst Switches that
proactively protects your critical network infrastructure. Delivering powerful, easy-to-use tools to effectively prevent
the most common and potentially damaging Layer 2 security threats, Cisco Integrated Security Features provides
robust security throughout the network. Cisco Integrated Security Features include Port Security, DHCP Snooping,
Dynamic ARP Inspection, and IP Source guard.
●
Port Security secures the access to an access or trunk port based on MAC address. It limits the number of
learned MAC addresses to deny MAC address-flooding.
●
DHCP Snooping prevents malicious users from spoofing a DHCP server and sending out bogus addresses.
This feature is used by other primary security features to prevent a number of other attacks such as ARP
poisoning.
●
Dynamic ARP Inspection (DAI) helps ensure user integrity by preventing malicious users from exploiting the
insecure nature of the ARP protocol (3560-C Only).
●
IP source guard prevents a malicious user from spoofing or taking over another user's IP address by
creating a binding table between the client's IP and MAC address, port, and VLAN (3560-C Only).
Cisco TrustSec
TrustSec secures access to the network, enforces security policies, and delivers standard based security solutions
such as 802.1X enabling secure collaboration and policy compliance. TrustSec capabilities reflect Cisco thought
leadership, innovations, and commitment to customer success. These new capabilities include:
●
IEEE 802.1AE MACsec with prestandard 802.1X-REV Key management: industry's first fixed switches with
prestandard 802.1X-Rev key management. Available on Cisco Catalyst 3560-C Series Switches, MACsec
provides Layer 2, line rate Ethernet data confidentiality and integrity on host facing ports, protecting against
man-in-the-middle attacks (snooping, tampering, and replay).
●
Flexible authentication that supports multiple authentication mechanisms including 802.1X, MAC
Authentication Bypass and web authentication using a single, consistent configuration.
●
Open mode that creates a user friendly environment for 802.1X operations.
●
Integration of device profiling technology and guest access handling with Cisco switching to significantly
improve security while reducing deployment and operational challenges.
●
RADIUS Change of Authorization and Downloadable Calls for comprehensive policy management
capabilities.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 15
Data Sheet
●
802.1X Supplicant with Network Edge Access Transport (NEAT) enables extended secure access where
compact switches in the conference rooms have the same level of security as switches inside the locked
wiring closet.
Other Advanced Security Features
Other Advanced Security features include but are not limited to:
●
Private VLAN Edge provides security and isolation between switch ports, which helps ensure that users
cannot snoop on other users' traffic.
●
Multidomain Authentication allows an IP phone and a PC to authenticate on the same switch port while
placing them on appropriate voice and data VLAN.
●
Port-Based ACLs for Layer 2 interfaces allow security policies to be applied on individual switch ports.
●
Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3
(SNMPv3) provide network security by encrypting administrator traffic during Telnet and SNMP sessions.
SSH Protocol, Kerberos, and the cryptographic version of SNMPv3 require a special cryptographic software
image because of U.S. export restrictions.
●
Bidirectional data support on the Switched Port Analyzer (SPAN) port allows Cisco Intrusion Detection
System (IDS) to take action when an intruder is detected.
●
TACACS+ and RADIUS Authentication facilitates centralized control of the switch and restricts
unauthorized users from altering the configuration.
●
MAC Address Notification allows administrators to be notified of users added to or removed from the
network.
●
Multilevel Security on Console Access prevents unauthorized users from altering the switch configuration.
●
Bridge Protocol Data Unit (BPDU) Guard shuts down Spanning Tree PortFast-enabled interfaces when
BPDUs are received to avoid accidental topology loops.
●
Spanning Tree Root Guard (STRG) prevents edge devices not in the network administrator's control from
becoming Spanning Tree Protocol root nodes.
●
IGMP Filtering provides multicast authentication by filtering out nonsubscribers and limits the number of
concurrent multicast streams available per port.
●
Dynamic VLAN Assignment is supported through implementation of VLAN Membership Policy Server client
capability to provide flexibility in assigning ports to VLANs. Dynamic VLAN facilitates the fast assignment of
IP addresses.
Table 3 shows switch hardware information.
Table 3.
Description
Cisco Catalyst 3560-C and 2960-C Series Compact Switch Hardware
Specification
Performance
Cisco Catalyst 3560-C
Cisco Catalyst 2960-C
Forwarding Bandwidth
10 Gbps
10 Gbps
Flash memory
64 MB
64 MB
Memory DRAM
128 MB
128 MB
Max VLANs
255
255
VLAN IDs
4K
4K
Maximum transmission unit (MTU)
Up to 9000 bytes
Up to 9000 bytes
Jumbo frames
9018 bytes
9018 bytes
Forwarding rate 64 Byte Packet Cisco Catalyst 3560-C
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 15
Data Sheet
Description
Specification
WS-C3560CG-8TC-S
13.2 mpps
WS-C3560CG-8PC-S
13.2 mpps
Forwarding rate 64 Byte Packet Cisco Catalyst 2960-C
Connectors and
cabling
WS-C2960CG-8TC-L
13.2 mpps
WS-C2960CPD-8PT-L
3.8 mpps
WS-C2960CPD-8TT-L
3.8 mpps
Resource Cisco Catalyst 3560-C, 2960-C
Default
Routing
Unicast MAC addresses
8000
4000
IGMP groups and multicast routes
250
250
Unicast routes
750
875
Directly connected hosts
250
750
Indirect routes
750
875
QoS classification ACEs
125
375
Security ACEs
375
375
VLANs
255
255
Cisco Catalyst 3560-C and 2960-C with SFP-based ports:
● 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
● 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
● 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
● 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
● 1000BASE-SX -LX/LH, -ZX, -BX, -T*, -FX*, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
● 100BASE-LX, -BX, -FX: SFP-based ports: LC fiber connectors (single/multimode fiber)
*
GLC-T and GLC-GE-100FX are not supported
For the complete list of SFP's supported please see:
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html
Power connectors
● Customers can provide power to a switch only by using the internal power supply (2960CPD-8TT-L and 2960CPD-8PT-L
do not require a power supply). The connector is located at the back of the switch. The internal power supply is an
autoranging unit.
● The internal power supply supports input voltages between 100 and 240VAC.
● Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
Note: The Cisco Catalyst 2960CPD-8TT-L and 2960CPD-8TT-L has an option for an external power adapter if desired.
Indicators
Dimensions
(H x W x D)
Weight
● Per-port status: Link integrity, disabled, activity, speed, full-duplex
● System status: System, RPS, link status, link duplex, link speed
Cisco Catalyst 2960-C
Inches
Centimeters
WS-C2960CPD-8TT-L
1.75x10.6x6.8
44.4x269x172
WS-C2960CPD-8PT-L
1.75x10.6x6.8
44.4x269x172
WS-C2960CG-8TC-L
1.75x10.6x8.4
44.4x269x213
Cisco Catalyst 3560-C
Inches
Centimeters
WS-C3560CG-8TC-S
1.75x10.6x8.4
44.4x269x213
WS-C3560CG-8PC-S
1.75x10.6x9.4
44.4x269x238
Cisco Catalyst 2960-C
Pounds
Kilograms
WS-C2960CPD-8TT-L
2.4
1.08
WS-C2960CPD-8PT-L
2.4
1.08
WS-C2960CG-8TC-L
3.0
1.35
Cisco Catalyst 3560-C
Pounds
Kilograms
WS-C3560CG-8TC-S
3.0
1.35
WS-C3560CG-8PC-S
4.25
1.92
Cisco Catalyst 3560-C
Cisco Catalyst 2960-C
Environmental ranges
Operating* temperature up to
5000 ft (1524 m)
-5°C to + 40°C
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
+23°F to + 104°F
-5°C to +40°C
+23°F
to +104°F
Page 8 of 15
Data Sheet
Description
Specification
Operating* temperature up to
10,000 ft (3048 m)
-5°C to +40°C
+23°F to +104°F
-5°C to +40°C
+23°F t
o +104°F
Storage temperature up to
15,000 ft (4572 m)
-25°C to +70°C
-13°F to +158°F
-25°C to +70°C
-13°F
Operating altitude
Up to 3048 m
Up to 10,000 ft
Up to 3048 m
Up to 10,000 ft
Storage altitude
Up to 4000 m
Up to 15,000 ft
Up to 4000 m
Up to 15,000 ft
Operating relative humidity
5% to 95% noncondensing
5% to 95% noncondensing
Storage relative humidity
5% to 95% noncondensing
5% to 95% noncondensing
to +158°F
* Minimum ambient temperature for cold start is 0°C (+ 32°F).
Acoustic noise
Mean time between
failure (MTBF)
ISO 7779 and ISO 9296: Bystander positions operating to an ambient temperature of 25°C
Model
Sound pressure LpA
(Typical)
Model
Sound pressure LpA
(Typical)
Cisco Catalyst 3560-C
0dB (fanless)
Cisco Catalyst 2960-C
0dB (fanless)
Cisco Catalyst 3560-C
MTBF
Cisco Catalyst 2960-C
MTBF
3560CG-8PC-S
355,830
2960CPD-8PT-L
346,590
3560CG-8TC-S
488,549
2960CPD-8TT-L
471,888
2960CG-8TC-L
542,482
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 15
Data Sheet
Table 4 shows switch power specifications.
Table 4.
Power Specifications for Cisco Catalyst 3560-C and 2960-C Series Compact Switch
Description
Specification
Measured 100%
throughput power
consumption
Cisco Catalyst 3560-C
Switch Power
Consumption Watts
Cisco Catalyst 2960-C
Switch Power
Consumption Watts
3560CG-8PC-S
23.9W
2960CG-8TC-L
17.6W
3560CG-8TC-S
18.4W
2960CPD-8PT-L
Single Uplink = 12W
Dual Uplink = 15W
2960CPD-8TT-L
Single Uplink = 12W
Dual Uplink = 15W
Measured 5%
throughput power
consumption
Switch Power
Consumption Watts
Cisco Catalyst 2960-C
Switch Power
Consumption Watts
3560CG-8PC-S
23.9W
2960CG-8TC-L
18W
3560CG-8TC-S
18.4W
2960CPD-8PT-L
Single Uplink = 12W
Dual Uplink = 15W
Power rating
1
1
Single Uplink = 12W
Dual Uplink = 15W
AC/DC input voltage
and current
1
1
Cisco Catalyst 3560-C
2960CPD-8TT-L
Measured 100%
throughput power
consumption (with
maximum possible
PoE loads)
1
1
1
1
Cisco Catalyst 3560-C
Switch Power
Consumption Watts
Cisco Catalyst 2960-C
Switch Power
Consumption Watts
3560CG-8PC-S
158W
2960CPD-8TT-L
43W
Cisco Catalyst 3560-C
Cisco Catalyst 2960-C
I/P Voltage
I/P Current
3560CG-8PC-S
100-240 VAC
1.7-0.9A
3560CG-8TC-S
100-240 VAC
0.3-0.15A
Cisco Catalyst 3560-C
I/P voltage
I/P Current
2960CG-8TC-L
100-240 VAC
0.3-0.15A
2960CPD-8PT-L
100-240 VAC
.01-.6A
2960CPD-8TT-L
100-240 VAC
.01-.6A
KVA
BTU
Cisco Catalyst 2960-C
Watts
KVA
BTU
Watts
3560CG-8PC-S
158
0.2
539
2960CG-8TC-L
17.6
0.02
60
3560CG-8TC-S
18.4
0.02
63
2960CPD-8PT-L
51
.05
174
2960CPD-8TT-L
51
.05
174
Power measurement are best and worst case. Best Case is 1 PoE Connection. Worst case is 2 PoE+
connections.
PoE and PoE+
● Maximum power supplied per Port for PoE+ is 30 W
● Maximum power supplied per port for PoE: 15.4 W
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 15
Data Sheet
Table 5 shows switch management and standards support.
Table 5.
Description
Management
Management and Standards Support for Cisco Catalyst 3560-C and 2960-C Series Compact Switch
Specification
● BRIDGE-MIB
● CISCO-CABLE-DIAG-MIB
● CISCO-TC-MIB
● CISCO-TCP-MIB
● CISCO-CDP-MIB
● CISCO-CLUSTER-MIB
● CISCO-UDLDP-MIB
● CISCO-VLAN-IFTABLE
● CISCO-CONFIG-COPY-MIB
● CISCO-CONFIG-MAN-MIB
● RELATIONSHIP-MIB
● CISCO-VLAN-MEMBERSHIP-MIB
● CISCO-DHCP-SNOOPING-MIB
● CISCO-ENTITY-VENDORTYPE-OID-MIB
● CISCO-VTP-MIB
● ENTITY-MIB
● CISCO-ENVMON-MIB
● CISCO-ERR-DISABLE-MIB
● ETHERLIKE-MIB
● IEEE8021-PAE-MIB
● CISCO-FLASH-MIB
● CISCO-FTP-CLIENT-MIB
● IEEE8023-LAG-MIB
● IF-MIB
● CISCO-IGMP-FILTER-MIB
● CISCO-IMAGE-MIB
● INET-ADDRESS-MIB
● OLD-CISCO-CHASSIS-MIB
● CISCO-IP-STAT-MIB
● CISCO-LAG-MIB
● OLD-CISCO-FLASH-MIB
● OLD-CISCO-INTERFACES-MIB
● CISCO-MAC-NOTIFICATION-MIB
● CISCO-MEMORY-POOL-MIB
● OLD-CISCO-IP-MIB
● OLD-CISCO-SYS-MIB
● CISCO-PAGP-MIB
● CISCO-PING-MIB
● OLD-CISCO-TCP-MIB
● OLD-CISCO-TS-MIB
● CISCO-POE-EXTENSIONS-MIB
● CISCO-PORT-QOS-MIB
● RFC1213-MIB
● RMON-MIB
● CISCO-PORT-SECURITY-MIB
● CISCO-PORT-STORM-CONTROL-MIB
● RMON2-MIB
● SNMP-FRAMEWORK-MIB
● CISCO-PRODUCTS-MIB
● CISCO-PROCESS-MIB
● SNMP-MPD-MIB
● SNMP-NOTIFICATION-MIB
● CISCO-RTTMON-MIB
● CISCO-SMI-MIB
● SNMP-TARGET-MIB
● SNMPv2-MIB
● CISCO-STP-EXTENSIONS-MIB
● CISCO-SYSLOG-MIB
● TCP-MIB
● UDP-MIB
● ePM MIB
Standards
● IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS Prioritization
● 100BASE-BX (SFP)
● 100BASE-FX (SFP)
● IEEE 802.1Q VLAN
● IEEE 802.1s
● 100BASE-LX (SFP)
● 1000BASE-BX (SFP)
● IEEE 802.1w
● IEEE 802.1x
● 1000BASE-SX (SFP)
● 1000BASE-LX/LH (SFP)
● IEEE 802.1AB (LLDP)
● IEEE 802.3ad
● 1000BASE-ZX (SFP)
● 1000BASE-CWDM SFP 1470 nm
● IEEE 802.3af
● IEEE 802.3ah (100BASE-X single/multimode fiber only)
● 1000BASE-CWDM SFP 1490 nm
● 1000BASE-CWDM SFP 1510 nm
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and
1000BASE-T ports
● IEEE 802.3 10BASE-T specification
● 1000BASE-CWDM SFP 1530 nm
● 1000BASE-CWDM SFP 1550 nm
● IEEE 802.3u 100BASE-TX specification
● IEEE 802.3ab 1000BASE-T specification
● IEEE 802.3z 1000BASE-X specification
● 1000BASE-CWDM SFP 1570 nm
● 1000BASE-CWDM SFP 1590 nm
● 1000BASE-CWDM SFP 1610 nm
● RMON I and II standards
● SNMPv1, SNMPv2c, and SNMPv3
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 11 of 15
Data Sheet
Description
Specification
RFC compliance
● RFC 768: UDP
● RFC 783: TFTP
● RFC 1812: IP Routing
● RFC 1901: SNMPv2C
● RFC 791: IP
● RFC 792: ICMP
● RFC 1902-1907: SNMPv2
● RFC 1981: MTU Path Discovery IPv6
● RFC 793: TCP
● RFC 826: ARP
● FRC 2068: HTTP
● RFC 2080: RIP for IPv6
● RFC 854: Telnet
● RFC 951: Bootstrap Protocol
● RFC 2131: DHCP
● RFC 2138: RADIUS
● RFC 1542: BOOTP Extensions
● RFC 959: FTP
● RFC 2233: IF MIB
● RFC 2236: IP Multicast
● RFC 1058: RIP Routing
● RFC 1112: IP Multicast and IGMP
● RFC 2328: OSPFv2
● RFC 2362: PIM Sparse Mode
● RFC 1157: SNMPv1
● RFC 1163: BGP Routing
● RFC 2273-2275: SNMPv3
● RFC 2373: IPv6 Aggregatable Addrs
● RFC 1166: IP Addresses
● RFC 1253: OSPF Routing
● RFC 2453: RIPv2 Routing
● RFC 2460: IPv6 protocol
● RFC 1256: ICMP Router Discovery
● RFC 1267: BGP Routing
● RFC 2461: IPv6 Neighbor Discovery
● RFC 2462: IPv6 Autoconfiguration
● RFC 1305: NTP
● RFC 1492: TACACS+
● RFC 2463: ICMP IPv6
● RFC 2474: DiffServ Precedence
● RFC 1493: Bridge MIB
● RFC 1542: Bootstrap Protocol
● RFC 2597: Assured Forwarding
● RFC 2598: Expedited Forwarding
● RFC 1583: OSPFv2
● RFC 1643: Ethernet Interface MIB
● RFC 2571: SNMP Management
● RFC 2740: OSPF for IPv6
● RFC 1723: RIPv2 Routing
● RFC 1757: RMON
● RFC 3046: DHCP Relay Agent Information Option
● RFC 3101, 1587: NSSAs
● RFC 3376: IGMPv3
● RFC 3580: 802.1x RADIUS
● RFC 4271, 1771: BGP Routing
Table 6 shows switch safety and compliance information.
Table 6.
Safety and Compliance
Description
Safety standards
Specification
● UL 60950-1
● CAN/CSA 22.2 No. 60950-1
● EN 60950-1
● IEC 60950-1
● CE Marking
● GB 4943
● IEC 60825
Electromagnetic
emissions
certifications
● FCC Part 15, CFR 47, Class A, North America
● EN 55022 (CISPR22) and EN 55024 (CISPR24), CE marking, European Union
● AS/NZS, Class A, CISPR22:2004 or EN55022, Australia and New Zealand
● VCCI Class A, V-3/2007.04, Japan
KCC (formerly MIC, GB17625.1-1998) Class A, KN24/KN22, Korea
● ANATEL, Brazil
● CCC, China
● GOST, Russia
Environmental
Reduction of Hazardous Substances (ROHS) 6
Telco
Common Language Equipment Identifier (CLEI) code
Safety Compliance and Product Approval Status
For further information on safety and compliance documentation, visit the Product Approval Status tool at
http://tools.cisco.com/cse/prdapp/jsp/externalsearch.do?action=externalsearch&page=EXTERNAL_SEARCH.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 12 of 15
Data Sheet
Cisco Enhanced Limited Lifetime Hardware Warranty
Cisco Catalyst 2960-C and 3560-C Series Switches come with an enhanced limited lifetime hardware warranty (ELLW) that includes 90 days of Cisco Technical Assistance Center (TAC) support and next-business-day hardware
replacement.
Your formal warranty statement, including the warranty applicable to Cisco software, appears in the Cisco
information packet that accompanies your Cisco product. We encourage you to review carefully the warranty
statement shipped with your specific product before use. Cisco reserves the right to refund the purchase price as its
exclusive warranty remedy. For additional information on warranty terms, visit http://www.cisco.com/go/warranty.
Adding a Cisco technical services contract to your device coverage provides access to the Cisco TAC beyond the
90-day period allowed by the E-LLW. It also can provide a variety of hardware replacement options to meet critical
business needs, as well as updates for licensed premium IOS software, and registered access to the extensive
Cisco.com knowledge base and support tools.
Footnotes:
1
. Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the
licensed feature set.
2
. Advance hardware replacement is available in various service-level combinations. For example, 8x5xNBD indicates that shipment
will be initiated during the standard 8-hour business day, 5 days a week (the generally accepted business days within the relevant
region), with next business day (NBD) delivery. Where NBD is not available, same day ship is provided. Restrictions apply; please
review the appropriate service descriptions for details.
Table 7.
Enhanced Limited Lifetime Hardware Warranty
Cisco Enhanced Limited Lifetime Hardware Warranty
Device covered
Applies to Cisco Catalyst 2960-C and 3560-C Series compact switches
Warranty duration
As long as the original end user continues to own or use the product, provided that and power supply warranty is limited
to 5 years.
EoL policy
In the event of discontinuance of product manufacture, Cisco warranty support is limited to 5 years from the
announcement of discontinuance.
Hardware replacement
Cisco or its service center will use commercially reasonable efforts to ship a replacement for next business day delivery,
where available. Otherwise, a replacement will be shipped within 10 working days after receipt of the RMA request.
Actual delivery times might vary depending on customer location.
Effective date
Hardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller, not
more than 90 days after original shipment by Cisco).
TAC support
Cisco will provide during business hours, 8 hours per day, 5 days per week basic configuration, diagnosis, and
troubleshooting of device-level problems for up to a 90-day period from the date of shipment of the originally purchased
Cisco Catalyst 2960 and 3560 product. This support does not include solution or network-level support beyond the
specific device under consideration.
Cisco.com access
Warranty allows guest access only to Cisco.com.
Software Policy for Cisco Catalyst 3560-C and 2960-C Series Compact Switches
Customers with Cisco Catalyst LAN Base and IP Base software feature sets will be provided with maintenance
updates and bug fixes designed to maintain the compliance of the software with published specifications, release
notes, and industry standards compliance as long as the original end user continues to own or use the product or up
to one year from the end-of-sale date for this product, whichever occurs earlier. Customers with licenses for our
®
premium software images require a service support contract such as Cisco SMARTnet Service to download
updates.
This policy supersedes any previous warranty or software statement and is subject to change without notice.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 13 of 15
Data Sheet
Cisco and Partner Services for Next-Generation Cisco Catalyst Fixed Switches
Enable the innovative, secure, intelligent edge in the Borderless Network Architecture using personalized services
from Cisco and our partners. Through a discovery process that begins with understanding your business objectives,
we help you integrate the next-generation Cisco Catalyst fixed switches into your architecture and incorporate
network services onto that platform. Sharing knowledge and leading practices, we support your success every step
of the way as you deploy, absorb, manage, and scale new technology. Choose from a flexible suite of support
services designed to meet your business needs and help you maintain high-quality network performance while
controlling operational costs. (See Table 8.)
Table 8.
Technical Services Available for Cisco Catalyst 3560-C and 2960-C Series Compact Switches
Technical Services
Cisco SMARTnet Service
● Around-the-clock, global access to the Cisco Technical Assistance Center (TAC)
● Unrestricted access to the extensive Cisco.com knowledge base and tools
● Next-business-day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement and onsite parts replacement and installation available
● Ongoing operating system software updates within the licensed feature set
● Proactive diagnostics and real-time alerts on Smart Call Home enabled devices
Cisco Smart Foundation Service
● Next business day advance hardware replacement as available
● Business hours access to SMB TAC (access levels vary by region)
● Access to Cisco.com SMB knowledge base
● Online technical resources through Smart Foundation Portal
● Operating system software bug fixes and patches
Cisco Focused Technical Support Services
● 3 levels of premium, high-touch services are available:
● Cisco High-Touch Operations Management Service
● Cisco High-Touch Technical Support Service
● Cisco High-Touch Engineering Service
● Valid Cisco SMARTnet or SP Base contracts on all network equipment are required.
Ordering Information
Tables 9 and 10 give ordering information for the Cisco Catalyst 3560-C and 2960-C Series Compact Switches and
accessories.
To place an order, visit the Cisco Ordering homepage at
http://www.cisco.com/en/US/ordering/or13/or8/order_customer_help_how_to_order_listing.html.
Table 9.
Ordering Information for Cisco Catalyst 3560-C and 2960-C Series Compact Switches
Product Name (Part Number)
Description
WS-C2960CPD-8TT-L
Cisco Catalyst 2960-C PSE Switch 8 FE, 2 x 1G, PoE+ LAN Base
WS-C2960CPD-8PT-L
Cisco Catalyst 2960-C PD PSE Switch 8 FE PoE, 2 x 1G, PoE+ LAN Base
WS-C2960CG-8TC-L
Cisco Catalyst 2960-C Switch 8 GE, 2 x Dual Purpose Uplink, LAN Base
WS-C3560CG-8TC-S
Cisco Catalyst 3560-C Switch 8 GE, 2 x Dual Purpose Uplink, IP Base
WS-C3560CG-8PC-S
Cisco Catalyst 3560-C Switch 8 GE PoE, 2 x Dual Purpose, IP Base
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 14 of 15
Data Sheet
Table 10.
Ordering Information for Cisco Catalyst 3560-C and 2960-C Series Compact Switch Accessories
Part Number
CMP-CBLE-GRD=
*
Description
*
Cable guard for the 3560-C and 2960-C Compact switches
CMP-MGNT-TRAY =
MAGNET AND MOUNTING TRAY FOR 3560-C AND 2960-C
PWR-ADPT=
Power Adapter for the 3560-C and 2960-C Compact switches
PWR-CLP=
Power Clip for the 3560-C and 2960-C Compact switches
Available after FCS
For more information about Cisco products, contact:
●
United States and Canada: (toll free) 800 553-NETS (6387)
●
Europe: 32 2 778 4242
●
Australia: 612 9935 4107
●
Other: 408 526-7209
●
Internet: http://www.cisco.com
Printed in USA
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-639705-02
02/11
Page 15 of 15
Download PDF

advertising