Manual - PSA Products
COLOUR VIDEO DOORPHONE KIT
instruction manual
Choose
for intercoms
PAN780SK
PAN780FK
Version 2.0
fire • security • intercoms
psaproducts.com.au
1
CONTENTS
PAGE
1.
Features
3
2.
Kit Components
3
3.
Outdoor Camera Specifications
3
4.
Indoor Monitor Specifications
4
5.
Indoor Monitor Installation
5
6.
Outdoor Camera Installation
6
7.
Wiring & Maintenance Instructions
7
8.
Operating Instruction
11
9.
Warranty & Liability
12
2
1. FEATURES
1. 21mm slim indoor monitor with touch buttons
2. Weather and vandal resistant outdoor camera
3. 7” LED screen, no radiation, low power consumption and high definition.
4. Hands free communication to door.
5. Hands free internal paging communication to monitors
6. Surface touch function.
7. Unlock two doors respectively.
8. Monitoring the outside of house.
9. Fourteen polyphonic melodies.
.
10. Ring volume, talking volume, chroma and brightness adjustable.
2. KIT COMPONENTS
• One indoor monitor
• One outdoor camera
• One adapter
• One bracket for indoor monitor
•One Rain Hood
• Screws & Accessory Pack
(surface mount kit only)
3. OUTDOOR CAMERA SPECIFICATIONS
107【W】X 183【H】X 55【D】mm
1. IR distance approx 3m
Camera
2. Automatic gain control
High Intensity Lights
3. Working temperature: -20°C~50°C
Microphone
4. Resolution: More than 420TVL
123456
Name Plate
5.
Surface camera dimension:
Without rain hood:
98(W) x 173(H) x 35(D) mm
With optional rain hood:
105(W) x 183(H) x 55 (D) mm
Connection Terminals
Speaker
Call
6.Flush camera dimensions:
Plate: 131(W) x 190(H) x 2(D) mm
Wallbox: 111(W) x 170(H) x 45 (D) mm
Microphone
Power Indicator Light
7.
Door lock voltage output:
12VDC 500mA
Power
Socket
Talk/Intercom
Door Release
Gate Release
Monitor
speaker
3
High Intensity Lights
Microphone
123456
Name Plate
Connection Terminals
Speaker
Call
4. INDOOR MONITOR SPECIFICATIONS
Microphone
Power Indicator Light
Chroma Adjuster
Brightness Adjuster
Talking Volume Adjuster
Volume Adjuster
Selection Adjuster
Power
Socket
Talk/Intercom
Door Release
Monitor
Gate Release
speaker
1. Adapter input voltage: AC110-240V/ 60Hz-50Hz
2. Adapter output voltage, output current: DC15V 1200mA
3. Talking last time: 120S±10%
4. Monitoring last time: 40S±10%
5. Working distance: 30M (4 x 0.5mm2)
6. Power consumption: standby <0.5W, working <10W
7. Illumination intensity: 2 luces
8. Visual angle: 92° wide-angle
9. Working temperature: -5°C~40°C
10. Relative humidity: 10-90% (RH)
11. Indoor monitor dimension: 232 (W) X 140 (H) X 21 (D)
12. Lock B Contact Rating: 9 - 30Vdc 2A
PARAMETER
SPECIFICATIONS
UNIT
Screen Size
7.0
Inch
Resolution
480 x 3 x 234
Dot
Active Area
154.1 (H) X 86.58 (V)
mm
Pixel Size
0.107 (W) X 0.37 (H)
mm
Screen Figure Dimension
169.4 (W) X 100 (H) X 5.7 (D)
MM
4
5. INDOOR MONITOR INSTALLATION
Bracket
Picture 1.
Picture 2.
1. Fix the bracket of the video indoor monitor on the wall with screws (Picture 1).
2.Hang the monitor on the bracket after finishing the wire connection. Plug the
enclosed adapter into the sockets of AC power and the monitor (Picture 2).
5
6. OUTDOOR CAMERA INSTALLATION
SURFACE CAMERA WITHOUT RAINHOOD
SURFACE CAMERA WITH RAINHOOD
Rainhood
Door Camera
Door Camera
Front Cover
Front Cover
call within 30cm
150~160CM
FLUSH CAMERA
30.0CM
Wall Box
Flush Camera
N.B to label the nameplate, remove the
front cover to access the nameplate
6
7. WIRING & MAINTENANCE INSTRUCTIONS
Cable Specifications:
• 0 to 30m: minimum CAT 5 or 4 Core Stranded 0.50mm2
• 30 to 80m: minimum 4 core Stranded 0.75mm2
1.To avoid any interference, all intercom cables should maintain 50mm separation from 240VAC wires
2.Never install door camera directly facing sunlight. This will create a white image on indoor monitor
and may damage the camera lens over time.
3.Do not install the monitor or power supply in areas of high temperature or high humidity.
4.To clean the monitor or door camera, use only a damp soft cloth. Do not use cleaning agents,
chemicals or spray directly with water.
5. Please note, nearby wireless devices may cause fuzzy pictures due to interference from radio waves.
Door Station Terminal Legend:
1 = Audio Wire
2 = Ground Wire
3 = Video Wire
4 = Power Wire
5 = Lock + (12VDC 500mA)
6 = Lock 7 = ID (used only for door station with proximity reader)
Indoor Monitor Terminal Legend:
1 = Audio Wire
2 = Ground Wire
3 = Video Wire
4 = Power Wire
5=G
round Wire (used with 2 Door Controller Only)
6=M
onitoring Wire (used with 2 Door Controller Only)
7 = ID (used only for door station with proximity reader)
Lock = Normally Open Contact (9 - 30VDC 2A)
7
Lock
12vdc
500mA
1
2
3
4
5
6
MONITOR OUT
1
2
3
4
5
DOOR
1
2
3
4
5
6
7
MONITOR IN
POWER
1
2
3
4
5
6
MONITOR OUT
Indoor Monitor A
DC 15V
1
2
3
4
5
DOOR
1
2
3
4
5
6
7
MONITOR IN
POWER
Lock B
+ -
Power
supply
1
2
3
4
5
6
MONITOR OUT
DC 15V
PAN780SK/FK: One Door to Three Monitors Wiring Diagram
Outdoor Camera
1
2
3
4
5
6
7
MONITOR IN
POWER
LOCK
Indoor Monitor C
LOCK
1
2
3
4
5
DOOR
Indoor Monitor B
DC 15V
1. Audio wire
2. Ground wire
3. Video wire
4. Power wire
8
LOCK
2 Door
Controller
1
2
3
4
5
DOOR
1
2
3
4
5
6
7
B
MONITOR IN
1
2
3
4
5
6
MONITOR OUT
DC 15V
IN
1 2 3 4 5 1 2 3 4 5 6 5 43 2 1+ -
DOOR
Indoor Monitor C
Indoor Monitor A
POWER
LOCK
A
1
2
3
4
5
6
MONITOR OUT
1
2
3
4
5
POWER
MONITOR IN
1
2
3
4
5
6
7
1
2
3
4
5
6
MONITOR OUT
Lock B
+ -
Power
supply
PAN780SK/FK: Two Doors to Three Monitors Diagram
Lock
12vdc
500mA
1
2
3
4
5
6
7
MONITOR IN
POWER
DC 15V
LOCK
Outdoor Camera A
1. Audio wire
2. Ground wire
3. Video wire
4. Power wire
1
2
3
4
5
DOOR
DC Power
Indoor Monitor B
LOCK
Outdoor Camera B
DC 15V
Lock
12vdc
500mA
9
8. OPERATING INSTRUCTION
1.Rings/chimes will be heard & images of visitors will be seen on the monitor once the
CALL button of door camera is pressed.
2.To talk to the visitor, touch TALK
.
3.If the system is connected to an electric strike, touch DOOR UNLOCK
4.If the system is connected to a motorised gate, touch GATE UNLOCK
5.To end the conversation, touch TALK
again. Talk mode will automatically shut down
after approximately 120 seconds if not ended.
6.To call internal monitor, when in standby mode, touch the TALK
button. Other
monitors in the system will ring/ chime (no video). To talk to calling monitor, touch the
TALK
button on receiving monitor.
Please Note: This intercom feature is a general paging intercom. If a system has more than 2 monitors, other monitors can hear the conversation.
7. To manually view or monitor the front door, touch MONITOR
8.To end monitoring, touch MONITOR
.
again. Monitoring mode will automatically end
after approximately 40 seconds.
9.To adjust brightness, colour & talking volume, use the dials on the right side of monitor.
10.To adjust ring tones & volume, use the buttons on the right side of monitor.
10
9. WARRANTY & LIABILITY
1PSA Products Pty Ltd (ABN: 99 076 468 703) of 17 Millicent Street, Burwood 3125 Victoria, Australia
warrants this product for a period of two years from the date of purchase, as reflected on the Authorised
Reseller’s or Distributor’s invoice / receipt provided to you. PSA Products Pty Ltd will repair or replace the
product (at the option of PSA Products) due to any manufacturing defect, at the cost of PSA Products Pty
Ltd (excluding any labour costs relating to removal or re-installation of product, and transport costs).
2 This warranty shall not apply to the product if it has been damaged, modified, abused or altered after the
date of purchase, or if it fails to operate due to improper maintenance.
3To the extent permitted by law, the liability of PSA Products Pty Ltd arising from the sale or under the
terms of this limited warranty shall not in any case exceed the cost of replacement and subject to this
clause. In no case shall PSA Products Pty Ltd be liable for consequential loss or damages resulting from the
failure of the product or breach of this, or: Any other warranty, express or implied, loss or damage caused
by failure to abide by the instructions supplied in the leaflets.
4To the extent permitted by law, PSA Products Pty Ltd., makes no warranty, expressed or implied, written
or oral, including that of merchantability or fitness for any particular purpose, with respect to the
consumer replaceable battery if any. A product with non-serviceable built-in battery is covered under
warranty of the product as per point 1.
5This warranty is provided in addition to other rights and remedies you have under law: Our goods come
with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. What constitutes a major failure is set out in
the Australian Consumer Law.
6To make a claim under warranty, take the product (with a proof of purchase) to the store where you
purchased the product or contact PSA Products Pty Ltd. Phone (03) 9888 9889. or Email: enquiry@
psaproducts.com.au with details, proof of purchase or expense claim in writing.
11
12
psaproducts.com.au
1300 772 776
enquiry@psaproducts.com.au
Choose
for intercoms
fire • security • intercoms
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising