iHM50R User Manual

iHM50R User Manual
Model: iHM50R
Instruction manual - US English
Size: 102 x 150 mm
Date: May 15, 2013
Mat’l: 128gsm matte finish paper
Color: Black text on white background
Warranty
Cover
W E L C O M E
Thank you for choosing the iHM50R featuring 1 docking insert to rest
Model iHM50R
Charging Stereo FM
Alarm Clock Radio for
Your Smartphone
your audio device in any position. This user guide will get you up and
running quickly and provide helpful hints to maximize enjoyment.
For more information about this and other iHome products, please
visit www.ihomeaudio.com
G E T T I N G
S T A R T E D
This unit ships with the following items. Please check to see that all
items are present.
1 iHM50R speaker system
2 1x backrest insert
3 1x 3.5mm audio cable
4 1x USB to micro-USB cable
5 100-240V Universal AC power adaptor
1
2
QUESTIONS? Visit www.ihome.com
3
4
5
1
Model: iHM50R
Instruction manual - US English
Size: 102 x 150 mm
Date: May 15, 2013
Mat’l: 128gsm matte finish paper
Color: Black text on white background
Warranty
Cover
W E L C O M E
Thank you for choosing the iHM50R featuring 1 docking insert to rest
Model iHM50R
Charging Stereo FM
Alarm Clock Radio for
Your Smartphone
your audio device in any position. This user guide will get you up and
running quickly and provide helpful hints to maximize enjoyment.
For more information about this and other iHome products, please
visit www.ihomeaudio.com
G E T T I N G
S T A R T E D
This unit ships with the following items. Please check to see that all
items are present.
1 iHM50R speaker system
2 1x backrest insert
3 1x 3.5mm audio cable
4 1x USB to micro-USB cable
5 100-240V Universal AC power adaptor
1
2
QUESTIONS? Visit www.ihome.com
3
4
5
1
F E A T U R E S
&
CONNE CT ING
F U N C T I O N S
TO
AC
POW E R
This unit operates on AC power
TOP PANEL
using the included 100V-240V
Backrest insert
universal AC adaptor for charging
Connection
compartment
and playing devices.
USB port
Aux line-in Jack
Place unit on a stable surface. Plug
the power adaptor into the DC jack
USB Mode Switch
7.5V 2.5A
on back of the unit and the other
Power On/Off
button
Sleep button
end into a working wall socket. You
Alarm button
can now charge devices connected
Mode button
Reverse & Forward
buttons
to the USB port.
Volume control buttons
B A C K - U P
Snooze/Dimmer button
BACK PANEL
DST Button
FM antenna
The iHM50R ships with a CR2450 battery installed for back-up to provide
Time set button
DC Jack
B A T T E R Y
continuous alarm operation and clock settings in the event of a power failure.
Remove the pull tab from the battery compartment on the bottom of the unit
before use. If a power failure occurs or the AC cord is accidentally
disconnected, the display backlight will not remain lit, but current time and
DISPLAY
Volume Indicator
alarm time settings will be temporarily maintained. Otherwise, you must reset
Time Display
the time and alarm settings.
Alarm
Indicator
PM Indicator
Note: The
AUX-In
Indicator
FM Radio
Indicator
Battery Low icon is located at the right side of clock display.
When the backup battery is low and needs to be replaced, the Battery
Low icon will flash. To replace, follow steps below:
Buzzer/Radio
Indicator
Sleep Indicator
Low Backup Battery Indicator
DST Indicator
2
3
F E A T U R E S
&
CONNE CT ING
F U N C T I O N S
TO
AC
POW E R
This unit operates on AC power
TOP PANEL
using the included 100V-240V
Backrest insert
universal AC adaptor for charging
Connection
compartment
and playing devices.
USB port
Aux line-in Jack
Place unit on a stable surface. Plug
the power adaptor into the DC jack
USB Mode Switch
7.5V 2.5A
on back of the unit and the other
Power On/Off
button
Sleep button
end into a working wall socket. You
Alarm button
can now charge devices connected
Mode button
Reverse & Forward
buttons
to the USB port.
Volume control buttons
B A C K - U P
Snooze/Dimmer button
BACK PANEL
DST Button
FM antenna
The iHM50R ships with a CR2450 battery installed for back-up to provide
Time set button
DC Jack
B A T T E R Y
continuous alarm operation and clock settings in the event of a power failure.
Remove the pull tab from the battery compartment on the bottom of the unit
before use. If a power failure occurs or the AC cord is accidentally
disconnected, the display backlight will not remain lit, but current time and
DISPLAY
Volume Indicator
alarm time settings will be temporarily maintained. Otherwise, you must reset
Time Display
the time and alarm settings.
Alarm
Indicator
PM Indicator
Note: The
AUX-In
Indicator
FM Radio
Indicator
Battery Low icon is located at the right side of clock display.
When the backup battery is low and needs to be replaced, the Battery
Low icon will flash. To replace, follow steps below:
Buzzer/Radio
Indicator
Sleep Indicator
Low Backup Battery Indicator
DST Indicator
2
3
B AC K- U P B AT T E R Y ( C O N T I N U E D )
USING THE BACKREST INSERT
This unit features a backrest insert which allows you to safely rest your audio
1.
Please make sure the AC adaptor is connected. Otherwise all settings
device while charging and playing it using the included audio cable and USB to
may be lost during battery replacement.
micro USB cable (if your device does not use micro USB,
2. Use a Phillips screwdriver to open the back-up battery compartment
please use the charging cable that came with it).
door located on the bottom of the unit.
1.
3. Remove the exhausted battery. Insert a
new CR2450 battery by easing it under the
tabs in the battery well and pressing down.
Plug the included audio cable
into the audio jack inside the
connection compartment,
leaving one end trailing out
the center rear of the unit.
2.
Plug the included USB cable
into the USB port inside the
connection compartment,
leaving one end trailing out
the center rear of the unit.
Make sure the USB Mode
Switch is in the default
position.
NOTE: If your device does
NOT have a micro USB port,
please use the charging cable
that came with your device.
4.
Place your audio device on
the backrest and connect the
audio cable to the
headphone jack on your
audio device.
Connect the included USB
cable (or your device’s USB
cable) to the USB port on
your device.
Make sure the side marked + is facing up.
Close the compartment door.
4. Close the battery compartment door and
tighten the battery door screw.
Note: Make sure you dispose of battery
properly (see your local regulations).
WARNING: Lithium batteries can explode or cause burns if disassembled,
3.
shorted, recharged, exposed to water, fire, or high temperatures. Do not
place loose batteries in a pocket, purse, or other container containing metal
objects, mix with used or other battery types, or store with hazardous or
combustible materials. Store in cool, dry, ventilated area. Follow applicable
laws and regulations for transport and disposal.
4
Gently snap the Backrest
Insert into place, making sure
the cables are free.
5
B AC K- U P B AT T E R Y ( C O N T I N U E D )
USING THE BACKREST INSERT
This unit features a backrest insert which allows you to safely rest your audio
1.
Please make sure the AC adaptor is connected. Otherwise all settings
device while charging and playing it using the included audio cable and USB to
may be lost during battery replacement.
micro USB cable (if your device does not use micro USB,
2. Use a Phillips screwdriver to open the back-up battery compartment
please use the charging cable that came with it).
door located on the bottom of the unit.
1.
3. Remove the exhausted battery. Insert a
new CR2450 battery by easing it under the
tabs in the battery well and pressing down.
Plug the included audio cable
into the audio jack inside the
connection compartment,
leaving one end trailing out
the center rear of the unit.
2.
Plug the included USB cable
into the USB port inside the
connection compartment,
leaving one end trailing out
the center rear of the unit.
Make sure the USB Mode
Switch is in the default
position.
NOTE: If your device does
NOT have a micro USB port,
please use the charging cable
that came with your device.
4.
Place your audio device on
the backrest and connect the
audio cable to the
headphone jack on your
audio device.
Connect the included USB
cable (or your device’s USB
cable) to the USB port on
your device.
Make sure the side marked + is facing up.
Close the compartment door.
4. Close the battery compartment door and
tighten the battery door screw.
Note: Make sure you dispose of battery
properly (see your local regulations).
WARNING: Lithium batteries can explode or cause burns if disassembled,
3.
shorted, recharged, exposed to water, fire, or high temperatures. Do not
place loose batteries in a pocket, purse, or other container containing metal
objects, mix with used or other battery types, or store with hazardous or
combustible materials. Store in cool, dry, ventilated area. Follow applicable
laws and regulations for transport and disposal.
4
Gently snap the Backrest
Insert into place, making sure
the cables are free.
5
C H A R G I N G
1.
S E T T I N G
D E V I C E S
T I M E
The unit features a Daylight Saving Time (DST) Button located on the
Make sure the unit is connected to a working power outlet using the
back of the unit for quickly adjusting the time at the start or end of
included AC adaptor.
2.
T H E
Daylight Saving Time. Press and release the DST Button at any time to
Connect the included USB to micro-USB cable to the USB port in
toggle between On (adds one hour) and Off (subtracts one hour). When
the connection compartment. (If your audio device does not have a
set to On, a DST icon
micro USB port, use the USB charging cable that came with your
appears on the display.
device.)
3.
1.
Connect the USB cable to your audio device. Observe the charging
Press and hold the Time Set Button located on the back of the unit until
the hour flashes in the display.
status of your device. If it does not appear to charge, move the USB
2. Press the + or – Buttons to set the hour. Make sure you are setting the time
Mode Switch inside the connection compartment to the other
to the correct AM or PM time. The PM indicator appears at the upper left
position. One of the positions should charge most devices, but
of the display; there is no AM indicator. NOTE: The time can be set to
certain devices use proprietary charging standards. If your device
standard 12 hour time (AM and PM) or to 24 hour time (sometimes called
does not charge, you must use the charger that came with it.
“military time”). To toggle between 12 and 24 modes, press and release the
Alarm Button (located on top of the unit) at any time during time
setting mode.
USB Mode switch
3. Press and release the Time Set Button to confirm the hour setting. The
P L AY I N G
minutes will begin flashing. Press the + or – Buttons to set the minutes,
M U S I C
then press and release the Time Set Button to confirm the current setting
and exit time setting mode.
Connect your audio device and place the Backrest Insert as described
on page 5.
Press the
SETTING AND USING THE ALARM
Power Button on the unit. Next, press the Mode Button as
needed until the
SETTING THE ALARM
audio icon appears on the display. Put your audio
device in play mode and use its controls to select audio sources and
This unit lets you wake to FM radio or built-in buzzer alarm. The alarm
adjust playback volume. Press the
will sound for 60 minutes or until reset/turned off.
Volume Buttons on the unit to
adjust listening level. When you are through listening, stop or pause play
1.
on your audio device. In about 3 minutes, the
2. Press the + or – Buttons to adjust the display to the desired alarm time (hold
icon will disappear and
Press and hold the
Alarm Button until the alarm time display flashes.
for rapid adjustment). Remember to set the correct AM or PM alarm time.
the unit will shut off.
6
7
C H A R G I N G
1.
S E T T I N G
D E V I C E S
T I M E
The unit features a Daylight Saving Time (DST) Button located on the
Make sure the unit is connected to a working power outlet using the
back of the unit for quickly adjusting the time at the start or end of
included AC adaptor.
2.
T H E
Daylight Saving Time. Press and release the DST Button at any time to
Connect the included USB to micro-USB cable to the USB port in
toggle between On (adds one hour) and Off (subtracts one hour). When
the connection compartment. (If your audio device does not have a
set to On, a DST icon
micro USB port, use the USB charging cable that came with your
appears on the display.
device.)
3.
1.
Connect the USB cable to your audio device. Observe the charging
Press and hold the Time Set Button located on the back of the unit until
the hour flashes in the display.
status of your device. If it does not appear to charge, move the USB
2. Press the + or – Buttons to set the hour. Make sure you are setting the time
Mode Switch inside the connection compartment to the other
to the correct AM or PM time. The PM indicator appears at the upper left
position. One of the positions should charge most devices, but
of the display; there is no AM indicator. NOTE: The time can be set to
certain devices use proprietary charging standards. If your device
standard 12 hour time (AM and PM) or to 24 hour time (sometimes called
does not charge, you must use the charger that came with it.
“military time”). To toggle between 12 and 24 modes, press and release the
Alarm Button (located on top of the unit) at any time during time
setting mode.
USB Mode switch
3. Press and release the Time Set Button to confirm the hour setting. The
P L AY I N G
minutes will begin flashing. Press the + or – Buttons to set the minutes,
M U S I C
then press and release the Time Set Button to confirm the current setting
and exit time setting mode.
Connect your audio device and place the Backrest Insert as described
on page 5.
Press the
SETTING AND USING THE ALARM
Power Button on the unit. Next, press the Mode Button as
needed until the
SETTING THE ALARM
audio icon appears on the display. Put your audio
device in play mode and use its controls to select audio sources and
This unit lets you wake to FM radio or built-in buzzer alarm. The alarm
adjust playback volume. Press the
will sound for 60 minutes or until reset/turned off.
Volume Buttons on the unit to
adjust listening level. When you are through listening, stop or pause play
1.
on your audio device. In about 3 minutes, the
2. Press the + or – Buttons to adjust the display to the desired alarm time (hold
icon will disappear and
Press and hold the
Alarm Button until the alarm time display flashes.
for rapid adjustment). Remember to set the correct AM or PM alarm time.
the unit will shut off.
6
7
SETTING AND USING THE ALARM
(CONTINUED)
F M
3. Press the
Fully extend the FM radio antenna on the back of the unit. Do not alter,
Alarm Button to confirm the alarm time. The wake-to
R A D I O
indicator will flash on the display. Press the + or – Buttons to toggle
strip or attach to other antennas.
between wake to buzzer and wake to radio settings.
Press the Mode Button to access FM radio mode. If off, the unit will
Wake to Buzzer:
If wake to Buzzer is selected, press the + or – Buttons to
power on. The currently tuned station frequency will appear in the
choose HI or LO buzzer alarm volume.
display.
Press the + or – Buttons to tune to a desired FM radio station; press and hold
Wake to Radio: If wake to Radio is selected, press the + or – Buttons to select
the desired radio station (press and hold to scan to next clear
to scan rapidly to the next clear station. Press the
station). Press the
the unit to adjust listening level. When you are through listening, turn the
Alarm Button to confirm radio station
unit off by pressing the
selection. Next, press the + or – Buttons to adjust the wake-up
Volume Buttons on
Power Button.
radio volume (can be set from 5- 40).
4. Press the
USING THE RADIO IN OTHER COUNTRIES
Alarm Button to exit and confirm alarm settings. An alarm
Different regions of the world use different FM radio frequency steps and
icon will appear on the display, indicating that the alarm is set and armed.
TIP: Download the FREE iHome Sleep app from the App Market (Apple store
ranges. You will need to select the one that matches the standards in your
or Android market, etc.) to enable your smart phone or device music as
region (USA, EUROPE, JAPAN, AUSTRALIA,or CHINA). The default setting is
wake to alarm source when connected via aux-in jack!
USA; if you live in the US, you may skip this section.
1.
Reviewing and Resetting the Alarm
Press the
Alarm Button at any time to review the current alarm settings.
To toggle the alarm on or off, press the
display. Press the + or – Buttons as needed to set the display to your region:
Alarm Button as needed. When
USA, EU (Europe), JPN (Japan), AUS (Australia), or CHN (China).
the alarm icon is displayed, the alarm is armed/on.
Press the
Power Button or
Make sure the unit is OFF (not playing in any mode). Press and hold the
Mode Button for about 5 seconds until “FM” and the region flashes in the
2. Press and release the Mode Button again (or no button within 10 seconds)
Alarm Button when the alarm is sounding
to exit the radio frequency setting mode. Two beeps will confirm radio
to reset it to come on again at the same time the next day. Press the
Alarm Button again to turn off/disarm the alarm. The alarm icon
frequency setting.
will
disappear.
S L E E P
M O D E
SNOOZE FEATURE
You can interrupt the alarm by pressing the Snooze/Dimmer Button while
the alarm is sounding. The alarm will resume at the end of the set snooze
Sleep mode lets you sleep to the current FM radio station. Press the Mode
time. The snooze duration time is adjustable. To change the snooze time
Button to access FM radio mode. Press the Sleep Button as needed to
from the default (9 minutes), press and hold the Snooze/Dimmer Button
cycle to the desired sleep duration: 120, 90, 60, 30 or 15 minutes or OFF
during normal operation (when alarm is not sounding) until the snooze time
(turns sleep mode off). Press the
flashes in the display. Press the + or – Buttons to adjust the time between 1 and
adjust sleep listening level. The unit will revert to normal volume level
29 minutes), then press the Snooze/Dimmer Button to confirm.
when sleep mode ends. Press the Sleep Button during sleep to view the
Volume Buttons on the unit to
remaining sleep time; press again to set sleep to next (lower) sleep
8
duration.
9
SETTING AND USING THE ALARM
(CONTINUED)
F M
3. Press the
Fully extend the FM radio antenna on the back of the unit. Do not alter,
Alarm Button to confirm the alarm time. The wake-to
R A D I O
indicator will flash on the display. Press the + or – Buttons to toggle
strip or attach to other antennas.
between wake to buzzer and wake to radio settings.
Press the Mode Button to access FM radio mode. If off, the unit will
Wake to Buzzer:
If wake to Buzzer is selected, press the + or – Buttons to
power on. The currently tuned station frequency will appear in the
choose HI or LO buzzer alarm volume.
display.
Press the + or – Buttons to tune to a desired FM radio station; press and hold
Wake to Radio: If wake to Radio is selected, press the + or – Buttons to select
the desired radio station (press and hold to scan to next clear
to scan rapidly to the next clear station. Press the
station). Press the
the unit to adjust listening level. When you are through listening, turn the
Alarm Button to confirm radio station
unit off by pressing the
selection. Next, press the + or – Buttons to adjust the wake-up
Volume Buttons on
Power Button.
radio volume (can be set from 5- 40).
4. Press the
USING THE RADIO IN OTHER COUNTRIES
Alarm Button to exit and confirm alarm settings. An alarm
Different regions of the world use different FM radio frequency steps and
icon will appear on the display, indicating that the alarm is set and armed.
TIP: Download the FREE iHome Sleep app from the App Market (Apple store
ranges. You will need to select the one that matches the standards in your
or Android market, etc.) to enable your smart phone or device music as
region (USA, EUROPE, JAPAN, AUSTRALIA,or CHINA). The default setting is
wake to alarm source when connected via aux-in jack!
USA; if you live in the US, you may skip this section.
1.
Reviewing and Resetting the Alarm
Press the
Alarm Button at any time to review the current alarm settings.
To toggle the alarm on or off, press the
display. Press the + or – Buttons as needed to set the display to your region:
Alarm Button as needed. When
USA, EU (Europe), JPN (Japan), AUS (Australia), or CHN (China).
the alarm icon is displayed, the alarm is armed/on.
Press the
Power Button or
Make sure the unit is OFF (not playing in any mode). Press and hold the
Mode Button for about 5 seconds until “FM” and the region flashes in the
2. Press and release the Mode Button again (or no button within 10 seconds)
Alarm Button when the alarm is sounding
to exit the radio frequency setting mode. Two beeps will confirm radio
to reset it to come on again at the same time the next day. Press the
Alarm Button again to turn off/disarm the alarm. The alarm icon
frequency setting.
will
disappear.
S L E E P
M O D E
SNOOZE FEATURE
You can interrupt the alarm by pressing the Snooze/Dimmer Button while
the alarm is sounding. The alarm will resume at the end of the set snooze
Sleep mode lets you sleep to the current FM radio station. Press the Mode
time. The snooze duration time is adjustable. To change the snooze time
Button to access FM radio mode. Press the Sleep Button as needed to
from the default (9 minutes), press and hold the Snooze/Dimmer Button
cycle to the desired sleep duration: 120, 90, 60, 30 or 15 minutes or OFF
during normal operation (when alarm is not sounding) until the snooze time
(turns sleep mode off). Press the
flashes in the display. Press the + or – Buttons to adjust the time between 1 and
adjust sleep listening level. The unit will revert to normal volume level
29 minutes), then press the Snooze/Dimmer Button to confirm.
when sleep mode ends. Press the Sleep Button during sleep to view the
Volume Buttons on the unit to
remaining sleep time; press again to set sleep to next (lower) sleep
8
duration.
9
T R O U B L E S H O O T I N G
T R O U B L E S H O O T I N G
Symptom
Possible reason
Solution
Symptom
Possible reason
Solution
Erratic
performance
External interference
Move unit away from potential sources of
external interference such as computers,
modems, wireless devices (routers) or
fluorescent light.
Unit won’t turn on
AC adaptor isn't plugged into
a working wall socket or not
plugged into the power jack
on back of the unit
No sound
Volume is too low
Turn volume up on your device
Plug the AC adaptor into a
working wall socket and plug the
connector into the supply jack on
the unit. Make sure any associated
wall switch that controls the outlet
the is ON.
Sound distorted
Volume is too high
Turn volume down on your device
If the original sound file (MP3) is old or of
poor quality, distortion and noise are
easily noticed with high-power speakers.
Try upgrading file from a trusted source
such as iTunes.
Device does not
respond to the
unit and/or
device is playing
but no sound
comes out
Audio cable and device are
not connected properly
Sound source is distorted
Check the volume setting on your
device. Make sure your device is
working properly before
connecting. Check that the audio
cable is firmly connected to both
the line-in jack and to the
headphone/audio out jack on your
device
Unit is not connected to
AC power
Please make sure the unit is connected
to a working power outlet. The unit will
not charge while operating on batteries
Unit is not properly connected
to power source an/or Power
Button is not ON
Make sure the unit is properly
connected to AC power source.
Check that the Power Button is lit
up, indicating the unit is ON.
Device uses a proprietary
charging protocol
Move the USB Circuit Switch found next
to the USB port to the other position and
monitor the charging status on your
device. If it still does not charge, your
device may require you to use the
charging accessory that came with it.
This unit uses audio detect
circuitry to enable alarm apps
to function properly. The
power button is disabled
when playing audio from a
device.
To turn off the unit when done
playing audio via the line in jack,
stop or pause play on your audio
device. The unit will power off
automatically in about 3 minutes.
USB cable is not
connected properly
Check that the USB plug is firmly and
correctly connected to the USB port
inside the cable compartment of the unit
and that the other end is properly
connected to your device
Device doesn’t
charge up
Unit won’t turn off
M A I N T E N A N C E
•
Place the unit on a level surface away from sources of direct sunlight or
excessive heat.
•
Protect your furniture when placing your unit on a natural wood and
lacquered finish. A cloth or other protective material should be placed
between it and the furniture.
•
Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as Benzene, thinner or similar materials
10
can damage the surface of the unit.
11
I M P O R TA N T S A F E T Y T I P S
I M P O R TANT SAF E T Y T I P S (CO NT ’ D)
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in
potential electrical shock or fire hazards. Please read all safety and operating
instructions carefully before installation and use, and keep these instructions
handy for future reference. Take special note of all warnings listed in these
instructions and on the unit.
12. Periods of Non use – If the unit is to be left unused for an extended period
of time, such as a month or longer, the power cable should be unplugged
from the unit to prevent damage or corrosion.
13. Servicing – The user should not attempt to service the unit beyond those
methods described in the user’s operating instructions. Service methods
not covered in the operating instructions should be referred to qualified
service personnel.
14. Magnetic Interference: This product’s speakers contain powerful magnets
which could cause interference or damage to sensitive equipment such as
hard drives, CRT televisions and monitors, as well as medical, scientific,
and navigational devices. Keep this unit away from these products at all
times.
1. Water and Moisture – The unit should not be used near water. For example:
near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a
wet basement.
2. Ventilation – The unit should be situated so that its location or position does
not interfere with its proper ventilation. For example, it should not be
situated on a bed, sofa, rug or similar surface that may block ventilation
openings. Also, it should not be placed in a built-in installation, such as a
bookcase or cabinet, which may impede the flow of air through the
ventilation openings.
3. Heat – The unit should be situated away from heat sources such as
radiators, heat registers, stoves or other appliances (including amplifiers)
that produce heat.
4. Power Sources – The unit should be connected to a power supply only of
the type described in the operating instructions or as marked on the
appliance.
5. Power-Cable Protection – Power supply cables should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them. It is always best to have a clear area from where the cable
exits the unit to where it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only as recommended. See the
Maintenance section of this manual for cleaning instructions.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall
and liquids are not spilled into any openings or vents located on the
product.
8. Attachments – Do not use attachments not recommended by the product
manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall
socket and disconnect the antenna or cable system during a lightning
storm or when it is left unattended and unused for long periods of time. This
will prevent damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified
service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate
normally.
12
A GUIDE TO PRODUCT SAFETY
This device complies with Part 15 of the FCC Rules, operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
•
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
•
13
L I M I T E D 1 Y E A R WA R R A N T Y
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI),
warrants this product to be free from defects in workmanship and materials, under
normal use and conditions, for a period of one (1) year from the date of original
purchase.
Should this product fail to function in a satisfactory manner, it is best to first return
it to the store where it was originally purchased. Should this fail to resolve the matter
and service still be required by reason of any defect or malfunction during the
warranty period, SDI will repair or, at its discretion, replace this product without
charge. This decision is subject to verification of the defect or malfunction upon
delivery of this product to the Factory Service Center authorized by SDI Customer
Service. The product must include proof of purchase, including date of purchase. An
out-of-warranty fee for service will be charged for units that are received without
proof of purchase.
Before returning this product for service, please first replace the batteries (if applicable)
with fresh ones, as exhausted or defective batteries are the most common cause of
problems encountered.
If service is still required:
1. Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the
address of the Factory Service Center.
2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy
corrugated box. SDI is not responsible for damage that occurs during shipping to
the Factory Service Center.
3. Enclose a photocopy of your sales receipt, credit card statement, or other proof
of the date of purchase, if within the warranty period. Also include your name and
address information, a brief description for why the unit is being returned, and the
return authorization number. No unit can be processed without a return authorization
number.
4. Write the return authorization number on the side of the shipping package and
send the unit prepaid and insured to the Factory Service Center address authorized
by SDI Customer Service.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it
was designed. It does not cover (i) products which have been damaged by negligence
or willful actions, misuse or accident, or which have been modified or repaired by
unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive
heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv)
the cost of shipping this product to the Factory Service Center and its return to the
owner.
This warranty is valid only in the United States of America and does not extend to
owners of the product other than to the original purchaser. In no event will SDI or
any of its affiliates, contractors, resellers, their officers, directors,
shareholders, members or agents be liable to you or any third party for any
consequential or incidental damages, any lost profits, actual, exemplary or punitive
damages. (Some states do not allow limitations on implied warranties or exclusion
of consequential damages, so these restrictions may not apply to you.) This warranty
gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above
mentioned disclaimer of warranty is contractually binding to you upon your transfer
of currency (money order, cashier's check, or credit card) for purchase of your SDI
product.
iHM50R-05152013-A
Printed in China
T R O U B L E S H O O T I N G
T R O U B L E S H O O T I N G
Symptom
Possible reason
Solution
Symptom
Possible reason
Solution
Erratic
performance
External interference
Move unit away from potential sources of
external interference such as computers,
modems, wireless devices (routers) or
fluorescent light.
Unit won’t turn on
AC adaptor isn't plugged into
a working wall socket or not
plugged into the power jack
on back of the unit
No sound
Volume is too low
Turn volume up on your device
Plug the AC adaptor into a
working wall socket and plug the
connector into the supply jack on
the unit. Make sure any associated
wall switch that controls the outlet
the is ON.
Sound distorted
Volume is too high
Turn volume down on your device
If the original sound file (MP3) is old or of
poor quality, distortion and noise are
easily noticed with high-power speakers.
Try upgrading file from a trusted source
such as iTunes.
Device does not
respond to the
unit and/or
device is playing
but no sound
comes out
Audio cable and device are
not connected properly
Sound source is distorted
Check the volume setting on your
device. Make sure your device is
working properly before
connecting. Check that the audio
cable is firmly connected to both
the line-in jack and to the
headphone/audio out jack on your
device
Unit is not connected to
AC power
Please make sure the unit is connected
to a working power outlet. The unit will
not charge while operating on batteries
Unit is not properly connected
to power source an/or Power
Button is not ON
Make sure the unit is properly
connected to AC power source.
Check that the Power Button is lit
up, indicating the unit is ON.
Device uses a proprietary
charging protocol
Move the USB Circuit Switch found next
to the USB port to the other position and
monitor the charging status on your
device. If it still does not charge, your
device may require you to use the
charging accessory that came with it.
This unit uses audio detect
circuitry to enable alarm apps
to function properly. The
power button is disabled
when playing audio from a
device.
To turn off the unit when done
playing audio via the line in jack,
stop or pause play on your audio
device. The unit will power off
automatically in about 3 minutes.
USB cable is not
connected properly
Check that the USB plug is firmly and
correctly connected to the USB port
inside the cable compartment of the unit
and that the other end is properly
connected to your device
Device doesn’t
charge up
Unit won’t turn off
M A I N T E N A N C E
•
Place the unit on a level surface away from sources of direct sunlight or
excessive heat.
•
Protect your furniture when placing your unit on a natural wood and
lacquered finish. A cloth or other protective material should be placed
between it and the furniture.
•
Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as Benzene, thinner or similar materials
10
can damage the surface of the unit.
11
T R O U B L E S H O O T I N G
T R O U B L E S H O O T I N G
Symptom
Possible reason
Solution
Symptom
Possible reason
Solution
Erratic
performance
External interference
Move unit away from potential sources of
external interference such as computers,
modems, wireless devices (routers) or
fluorescent light.
Unit won’t turn on
AC adaptor isn't plugged into
a working wall socket or not
plugged into the power jack
on back of the unit
No sound
Volume is too low
Turn volume up on your device
Plug the AC adaptor into a
working wall socket and plug the
connector into the supply jack on
the unit. Make sure any associated
wall switch that controls the outlet
the is ON.
Sound distorted
Volume is too high
Turn volume down on your device
If the original sound file (MP3) is old or of
poor quality, distortion and noise are
easily noticed with high-power speakers.
Try upgrading file from a trusted source
such as iTunes.
Device does not
respond to the
unit and/or
device is playing
but no sound
comes out
Audio cable and device are
not connected properly
Sound source is distorted
Check the volume setting on your
device. Make sure your device is
working properly before
connecting. Check that the audio
cable is firmly connected to both
the line-in jack and to the
headphone/audio out jack on your
device
Unit is not connected to
AC power
Please make sure the unit is connected
to a working power outlet. The unit will
not charge while operating on batteries
Unit is not properly connected
to power source an/or Power
Button is not ON
Make sure the unit is properly
connected to AC power source.
Check that the Power Button is lit
up, indicating the unit is ON.
Device uses a proprietary
charging protocol
Move the USB Circuit Switch found next
to the USB port to the other position and
monitor the charging status on your
device. If it still does not charge, your
device may require you to use the
charging accessory that came with it.
This unit uses audio detect
circuitry to enable alarm apps
to function properly. The
power button is disabled
when playing audio from a
device.
To turn off the unit when done
playing audio via the line in jack,
stop or pause play on your audio
device. The unit will power off
automatically in about 3 minutes.
USB cable is not
connected properly
Check that the USB plug is firmly and
correctly connected to the USB port
inside the cable compartment of the unit
and that the other end is properly
connected to your device
Device doesn’t
charge up
Unit won’t turn off
M A I N T E N A N C E
•
Place the unit on a level surface away from sources of direct sunlight or
excessive heat.
•
Protect your furniture when placing your unit on a natural wood and
lacquered finish. A cloth or other protective material should be placed
between it and the furniture.
•
Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as Benzene, thinner or similar materials
10
can damage the surface of the unit.
11
I M P O R TA N T S A F E T Y T I P S
I M P O R TANT SAF E T Y T I P S (CO NT ’ D)
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in
potential electrical shock or fire hazards. Please read all safety and operating
instructions carefully before installation and use, and keep these instructions
handy for future reference. Take special note of all warnings listed in these
instructions and on the unit.
12. Periods of Non use – If the unit is to be left unused for an extended period
of time, such as a month or longer, the power cable should be unplugged
from the unit to prevent damage or corrosion.
13. Servicing – The user should not attempt to service the unit beyond those
methods described in the user’s operating instructions. Service methods
not covered in the operating instructions should be referred to qualified
service personnel.
14. Magnetic Interference: This product’s speakers contain powerful magnets
which could cause interference or damage to sensitive equipment such as
hard drives, CRT televisions and monitors, as well as medical, scientific,
and navigational devices. Keep this unit away from these products at all
times.
1. Water and Moisture – The unit should not be used near water. For example:
near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a
wet basement.
2. Ventilation – The unit should be situated so that its location or position does
not interfere with its proper ventilation. For example, it should not be
situated on a bed, sofa, rug or similar surface that may block ventilation
openings. Also, it should not be placed in a built-in installation, such as a
bookcase or cabinet, which may impede the flow of air through the
ventilation openings.
3. Heat – The unit should be situated away from heat sources such as
radiators, heat registers, stoves or other appliances (including amplifiers)
that produce heat.
4. Power Sources – The unit should be connected to a power supply only of
the type described in the operating instructions or as marked on the
appliance.
5. Power-Cable Protection – Power supply cables should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them. It is always best to have a clear area from where the cable
exits the unit to where it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only as recommended. See the
Maintenance section of this manual for cleaning instructions.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall
and liquids are not spilled into any openings or vents located on the
product.
8. Attachments – Do not use attachments not recommended by the product
manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall
socket and disconnect the antenna or cable system during a lightning
storm or when it is left unattended and unused for long periods of time. This
will prevent damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified
service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate
normally.
12
A GUIDE TO PRODUCT SAFETY
This device complies with Part 15 of the FCC Rules, operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
•
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
•
13
I M P O R TA N T S A F E T Y T I P S
I M P O R TANT SAF E T Y T I P S (CO NT ’ D)
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in
potential electrical shock or fire hazards. Please read all safety and operating
instructions carefully before installation and use, and keep these instructions
handy for future reference. Take special note of all warnings listed in these
instructions and on the unit.
12. Periods of Non use – If the unit is to be left unused for an extended period
of time, such as a month or longer, the power cable should be unplugged
from the unit to prevent damage or corrosion.
13. Servicing – The user should not attempt to service the unit beyond those
methods described in the user’s operating instructions. Service methods
not covered in the operating instructions should be referred to qualified
service personnel.
14. Magnetic Interference: This product’s speakers contain powerful magnets
which could cause interference or damage to sensitive equipment such as
hard drives, CRT televisions and monitors, as well as medical, scientific,
and navigational devices. Keep this unit away from these products at all
times.
1. Water and Moisture – The unit should not be used near water. For example:
near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a
wet basement.
2. Ventilation – The unit should be situated so that its location or position does
not interfere with its proper ventilation. For example, it should not be
situated on a bed, sofa, rug or similar surface that may block ventilation
openings. Also, it should not be placed in a built-in installation, such as a
bookcase or cabinet, which may impede the flow of air through the
ventilation openings.
3. Heat – The unit should be situated away from heat sources such as
radiators, heat registers, stoves or other appliances (including amplifiers)
that produce heat.
4. Power Sources – The unit should be connected to a power supply only of
the type described in the operating instructions or as marked on the
appliance.
5. Power-Cable Protection – Power supply cables should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them. It is always best to have a clear area from where the cable
exits the unit to where it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only as recommended. See the
Maintenance section of this manual for cleaning instructions.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall
and liquids are not spilled into any openings or vents located on the
product.
8. Attachments – Do not use attachments not recommended by the product
manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall
socket and disconnect the antenna or cable system during a lightning
storm or when it is left unattended and unused for long periods of time. This
will prevent damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified
service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate
normally.
12
A GUIDE TO PRODUCT SAFETY
This device complies with Part 15 of the FCC Rules, operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
•
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
•
13
L I M I T E D 1 Y E A R WA R R A N T Y
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI),
warrants this product to be free from defects in workmanship and materials, under
normal use and conditions, for a period of one (1) year from the date of original
purchase.
Should this product fail to function in a satisfactory manner, it is best to first return
it to the store where it was originally purchased. Should this fail to resolve the matter
and service still be required by reason of any defect or malfunction during the
warranty period, SDI will repair or, at its discretion, replace this product without
charge. This decision is subject to verification of the defect or malfunction upon
delivery of this product to the Factory Service Center authorized by SDI Customer
Service. The product must include proof of purchase, including date of purchase. An
out-of-warranty fee for service will be charged for units that are received without
proof of purchase.
Before returning this product for service, please first replace the batteries (if applicable)
with fresh ones, as exhausted or defective batteries are the most common cause of
problems encountered.
If service is still required:
1. Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the
address of the Factory Service Center.
2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy
corrugated box. SDI is not responsible for damage that occurs during shipping to
the Factory Service Center.
3. Enclose a photocopy of your sales receipt, credit card statement, or other proof
of the date of purchase, if within the warranty period. Also include your name and
address information, a brief description for why the unit is being returned, and the
return authorization number. No unit can be processed without a return authorization
number.
4. Write the return authorization number on the side of the shipping package and
send the unit prepaid and insured to the Factory Service Center address authorized
by SDI Customer Service.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it
was designed. It does not cover (i) products which have been damaged by negligence
or willful actions, misuse or accident, or which have been modified or repaired by
unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive
heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv)
the cost of shipping this product to the Factory Service Center and its return to the
owner.
This warranty is valid only in the United States of America and does not extend to
owners of the product other than to the original purchaser. In no event will SDI or
any of its affiliates, contractors, resellers, their officers, directors,
shareholders, members or agents be liable to you or any third party for any
consequential or incidental damages, any lost profits, actual, exemplary or punitive
damages. (Some states do not allow limitations on implied warranties or exclusion
of consequential damages, so these restrictions may not apply to you.) This warranty
gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above
mentioned disclaimer of warranty is contractually binding to you upon your transfer
of currency (money order, cashier's check, or credit card) for purchase of your SDI
product.
iHM50R-05152013-A
Printed in China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement