Tripp Lite | SMART1050SLTAA | Datasheet | Tripp Lite SMART1050SLTAA uninterruptible power supply (UPS)

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SMART1050SLTAA
TAA Compliant SmartPro Tower UPS - Intelligent, line-interactive network power management system
Highlights
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule
purchases
1050VA / 1.05kVA line-interactive tower UPS system for networks
Maintains sine-wave 120V nominal output over an input range of 95 to 145V
Simultaneous communications via SNMPWEBCARD slot, HID enabled USB
and DB9 serial ports
Free PowerAlert UPS monitoring software manages an unlimited number of
network UPS systems
Input: NEMA 5-15P (120V 15A) / Output: 8 NEMA 5-15R (120V)
2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA, Puerto
Rico & Canada only)
Description
The SMART1050SLTAA is compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. 1050VA line-interactive tower
UPS system for server, networking and telecommunications equipment. Upright tower form factor. Offers sine wave 100V, 110V or 120V nominal
output in both AC and battery modes. Switches to battery-derived AC output during power failures and extreme voltage variations. Line-interactive
automatic voltage regulation (AVR) provides voltage boost during brownouts and voltage cut during overvoltages to maintain regulated 100V, 110V
or 120V nominal output over an input voltage range of 95-145V. Features NEMA 5-15P input plug and 8 NEMA 5-15R output receptacles.
Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB port, DB9 serial
port and SNMPWEBCARD slot. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of
Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3
network interfaces. Includes PowerAlert monitoring software and complete cabling. Features 3-stage metered current monitoring and battery charge
status LEDs. Dataline surge suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm.
Self-test. Field replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme. Two-year warranty and
$250,000connected equipment insurance; extended warranty and service contracts available.
Package Includes
SMART1050SLTAA TAA Compliant UPS System
PowerAlert Software CD
USB and serial cabling
Owner's manual with warranty information
Features
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
SmartPro line-interactive UPS system is ideal for voice, data, medical and industrial networking applications
Line-interactive automatic voltage regulation (AVR) maintains selectable 100V, 110V or 120V nominal output during brownouts as low as
83V and overvoltages to 145V
Enables continuous operation through blackouts, voltage fluctuations and surges
Enables continuous operation through blackouts, voltage fluctuations and surges
Line-interactive AVR provides a 14% boost during brownouts and a 12% voltage cut during overvoltages
Standard internal battery set offers 19 min. runtime at half load (325W) and 7 min. at full load (650W)
Space-saving upright tower format
Network interfaces support simultaneous communications via built-in USB port, DB9 serial port and SNMPWEBCARD slot
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus
any number of additional servers over IP
UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current,
battery capacity, timed inverter sutoff, activate self-test and output power control
NEMA 5-15P input plug; 8 x battery-supported NEMA 5-15R output receptacles
Front panel LEDs offer current monitoring, voltage regulation and battery charge level information
UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required
Single-line tel/DSL or network Ethernet line surge suppression
2-year warranty; $250,000 Ultimate Lifetime Insurance (USA & Canada only)
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
1050
Output kVA capacity (kVA)
1
Output Watt Capacity
(watts)
650
Output power factor
0.6
Nominal Output
Voltage(s) Supported
100V; 110V; 120V
Nominal Voltage details
120V default (voltage selection via back panel switches)
Frequency compatibility
50 / 60 Hz
Output voltage regulation
(line mode)
-13%, + 15%
Output voltage regulation
(Battery mode)
+/- 5%
Built-in UPS output
receptacles
8 5-15R outlet(s)
Basic PDU options
PDU1215 (1U / 13 5-15R outlets); PDUNV (1U / 2 C19, 12 C13 outlets); PDU1415 (0U / 14 5-15R outlets);
PDUV15 (0U / 12 5-15R outlets)
Metered PDU options
PDUMH15 (1U / 13 5-15R outlets); PDUMH15AT (1U / 8 5-15R outlets)*; PDUMV15 (0U / 16 5-15R outlets)
Switched PDU options
PDUMH15ATNET (1U / 8 5-15R outlets)*; PDUMV15NET (0U / 16 5-15R outlets)
External PDU redundancy
options
Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS
models only
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT
Rated input current (at
maximum load)
6.1A (120V), 6.6A (110V), 7.2A (100V)
Nominal Input Voltage(s)
Supported
100V AC; 110V AC; 120V AC
UPS input connection
type
5-15P
UPS Input cord length (ft.)
6
UPS Input cord length (m)
1.8
Recommended Electrical
Service
15A 120V
BATTERY
Full load runtime
(minutes)
7 min. (650w)
Half load runtime
(minutes)
19 min. (325w)
DC system voltage (VDC)
24
Battery recharge rate
(included batteries)
Less than 6 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
RBC24-SLT
Battery Access
Battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 95 to 145
(120v), 87 to 133 (110v), 83 to 121 (100v)
Overvoltage correction
Voltage reduction of 12% applies when input is 127 to 145 (120v), 116 to 133 (110v), 111 to 121 (100v)
Undervoltage correction
Voltage boost of 14% applies when input is 95 to 108 (120v), 87 to 99 (110v), 83 to 90 (100v)
LEDS ALARMS & SWITCHES
LED Indicators
9 LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter
for load and battery charge level
Site wiring fault indication
Rear panel site wiring fault LED
Alarms
Audible alarm indicates power failure and overload conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches
support nominal voltage selection
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
690
UPS AC suppression
response time
Instantaneous
UPS Dataline suppression
1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form factors
supported with included
accessories
Tower
Primary form factor
Tower
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)
10.2 x 6.8 x 13.2
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)
26 x 17.1 x 33.7
UPS / Power Module
weight (lbs)
36
UPS / Power Module
weight (kg)
16.3
UPS Shipping
dimensions (height x
width x depth / inches)
14 x 9.8 x 18.5
UPS Shipping
dimensions (height x
width x depth / cm)
35.6 x 24.8 x 47
Shipping weight (lbs)
39.6
Shipping weight (kg)
18
UPS housing material
Steel
Cooling method
Fan
ENVIRONMENTAL
Operating Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.
Storage Temperature
Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.
Relative Humidity
0 to 95%, non-condensing
AC mode BTU / hr. (full
load)
141.1
Battery mode BTU / hr.
(full load)
452.7
Audible Noise
Audible Noise < 50 dBA at Front Side 1 Meter
COMMUNICATIONS
Communications interface
USB; DB9 Serial; Slot for SNMP/Web interface
Network monitoring port
description
Supports detailed monitoring of UPS and site power conditions
PowerAlert software
Included
Communications cable
USB and DB9 cabling included
WatchDog compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications.
LINE / BATTERY TRANSFER
Transfer time
4-6 milliseconds
Low voltage transfer to
battery power (setpoint)
95V (120V), 87V (110V), 83V (100V)
High voltage transfer to
battery power (setpoint)
145V (120V), 133V (110V), 121V (100V)
SPECIAL FEATURES
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Hot swappable batteries
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B
(EMI); TAA Compliant
WARRANTY
Product Warranty Period
(U.S., Canada & Puerto
Rico)
2-year limited warranty
Connected Equipment
Insurance (U.S., Canada
& Puerto Rico)
$250,000 Ultimate Lifetime Insurance
Related Items
Optional Products
Product Type
Related Model
Description
Qty.
Extended Warranties
WEXT3-500-1500
3-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 1500VA or less
1
Extended Warranties
WEXT5-500-1500
5-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 1500VA or less
1
Power Distribution
PDU1215
Basic PDU / Power Distribution Unit - Safe, reliable power distribution
for critical networking equipment
1
SNMP Accessories
ENVIROSENSE
Monitors temperature, humidity and contact-closure inputs. (Requires
SNMPWEBCARD or switched PDU.)
1
SNMP Accessories
SNMPWEBCARD
For remote monitoring and control via SNMP, Web, or Telnet.
1
Software
WATCHDOGSW
WatchDog Service Monitoring / Reboot Software
1
Surge Protectors
DCATV
Network Surge Suppressor - Essential protection for TV/VCR coaxial
lines
1
Surge Protectors
DNET1
Network Surge Suppressor - Essential protection for data and
communication lines
1
Surge Protectors
DTEL2
Network Surge Suppressor - Essential protection for data and
communication lines
1
UPS Accessories
CT120
Instant-Read- AC Outlet Circuit Tester
1
USB Hubs/Accessories
U022-010
10-ft. USB2.0 A/B Gold Device Cable
(A Male to B Male)
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=4389.
Copyright © 2011 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Download PDF

advertising