industrial switch Industrial Switch 10/100BASE-TX to 100BASE-FX SISTM101x-1xx-LRT Managed Redundant Industrial Switch Ordering Information Extended Operating Temperature -40°C to +75°C Industrial Redundant Ring Topologies SISTM1010-180-LRT (8) 10/100BASE-TX (RJ-45) [100 m/328 ft.] SISTM1011-162-LRT (6) 10/100BASE-TX (RJ-45) [100 m/328 ft.] to (2) 100BASE-FX 1300nm MM (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB SISTM1013-162-LRT (6) 10/100BASE-TX (RJ-45) [100 m/328 ft.] to (2) 100BASE-FX 1300nm MM (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB Features SISTM1014-162-LRT (6) 10/100BASE-TX (RJ-45) [100 m/328 ft.] to (2) 100BASE-FX 1310nm SM (SC) [20 km/12.4 mi.] Link Budget: 17.0 dB AutoCross™ Optional Accessories (sold separately) IEEE 802.1P, 4-level priority queuing IGMP Snooping V1 with Query mode Auto-Negotiation Specifications IEEE 802.1Q VLAN capability Standards IEEE Std. 802.3, 802.1p, 802.1Q, 802.3u, 802.1d, 802.1w, 802.3x Status LEDs PWR (Power): ON = power connected R.M.: ON = Device is the Master in the redundant ring network PWR 1 (Power): ON = primary power connected PWR 2 (Power): ON = backup power connected Fault: ON = Fault on port link or loss of PWR 1 or PWR 2 LNK/ACT (Fiber): ON = Link on fiber 100 Mbps; Flashing = data transmitting FDX/COL (Fiber): ON = Full duplex link on fiber; Flashing = collisions occurring Ingress Packet Filtering Data Transfer Rate 10BASE-T: 14,880 pps; 100BASE-TX: 148,800 pps DHCP Client Support MAC Addresses 2K Spanning Tree/Rapid Spanning Tree Max Packet Size 1536 bytes TFTP Firmware Update Data Memory Buffer 1 Mb Dual Homing Application Support Backplane 2.0 Gbps Auto-Sensing Redundant DC Power Inputs SNMP MIB RFC 1213 MIBII, RFC 1493 Bridge MIB, RMON RFC 1757, RFC 2674 VLAN MIB, RFC 1643 Ethernet like MIB, RFC 1215 Trap MIB Dimensions Width: 2.1" [54 mm] Depth: 4.1" [105 mm] Height: 5.3" [135 mm] Ingress Protection IP 31 Input Power 12 to 48 VDC, 0.2A, redundant inputs with reverse polarity protection; Additional barrel connector cable Power Consumption -180 models: 4.6 Watts -162 models: 6.0 Watts Environment -40 to +75°C Ext. operating temp. -40 to +85°C storage temp. 5 – 95% humidity non-condensing 0 – 10,000 ft. altitude Redundant Ring Switching Technology (recovery time < 300ms) SNMP trap and SMTP email trap support SNTP Clock Synchronization Bandwidth Allocation Dry Contact Relays System Configuration Restore/Backup Extended (-40°C to 75°C) operating temperature Barrel connector interface cable included for connecting external AC/DC power supply 2 lbs. [0.90 kg] Safety Compliance UL 60950; cUL60950 EMI Compliance CISPR22/EN55022; EN60950 Class A; FCC Class A; CE Mark; EN61000-4-2; EN61000-4-3; EN61000-4-4; EN61000-4-5; EN61000-4-6 Warranty Lifetime tel: 952.941.7600 / 800.526.9267 fax: 952.941.2322 email@example.com http://www.transition.com Incorporate Redundant Ring technology into your industrial automation network to increase reliability and system uptime. Critical communication needs can now be protected using redundant copper or fiber links with switching recovery times of less than 300ms. These 8-port switches can be SNMP managed via web browser to configure all of the latest advanced industrial networking capability including IGMP snooping, VLANs, QoS, port mirroring and trunking. Transition Networks’ Industrial Switches are hardened devices designed to reliably operate in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments. Shipping Weight Transition Networks, Inc. Worldwide Headquarters: 10900 Red Circle Drive Minnetonka, MN 55343 USA External AC/DC Power Supply SPS-UA12DHT (100-240 VDC input 0°C to +70°C operating temperature) 25083 Universal AC/DC Input DIN Rail Mountable +12 VDC Power Supply ©2011 Transition Networks, Inc. All trade marks are the property of their respective owners. Technical information is subject to change without notice.