Power Distribution Components

Power Distribution Components
Power distribution components
Smart solutions for
electrical distribution
in commercial and
industrial applications
• MCB Distribution boards
and enclosures
• MCCB Panelboards
• Switch and protection devices
• Industrial switch and fusegear
• Enclosed motor, heating
and lighting control
• HRC cartridge fuselinks
& fuse units
• Power factor correction capacitors
2
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Power distribution components
Contents
1
Product overview
2
Memshield 3 MCB distribution boards and enclosures
3
Distribution board switch and protection devices45
4
Modular control and switching devices53
5
Memshield 3 MCCB panelboards65
6
Industrial switch & fusegear93
7
HRC cartridge fuselinks & fuse units105
8
Enclosed motor, heating and lighting control115
9
Power factor correction capacitors121
10
Technical data
125
Indices
185
5
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
31
3
4
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Product overview
1
Eaton’s comprehensive range of power distribution
solutions have been developed to meet today’s
challenging electrical sub-distribution applications
in commercial and industrial buildings. Through
a proven competency in electrical distribution,
Eaton delivers an innovative approach to aid
compliance with the wider regulatory requirements
associated with modern buildings.
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
TYPE A, SPN 125A DISTRIBUTION BOARDS AND PAN ASSEMBLIES.................................................................................... 6
TYPE B, TPN 125A/250A DISTRIBUTION BOARDS AND PAN ASSEMBLIES........................................................................... 8
TYPE B, TPN 250A DISTRIBUTION BOARDS........................................................................................................................... 10
DISTRIBUTION BOARD METERING SOLUTIONS................................................................................................................... 12
DISTRIBUTION BOARD SWITCH AND PROTECTION DEVICES............................................................................................. 13
MODULAR CONTROL AND SWITCHING DEVICES................................................................................................................. 14
MCCB PANELBOARDS AND PAN ASSEMBLIES...................................................................................................................... 15
SURGE PROTECTION DEVICES................................................................................................................................................ 16
INDUSTRIAL SWITCH & FUSEGEAR........................................................................................................................................ 17
Glasgow fuse-switch-disconnectors & switch-disconnectors...................................................................................................... 17
Glasgow busbar chamber system................................................................................................................................................ 18
Exel 2 switch-disconnectors & switch-disconnector fuses........................................................................................................... 19
Rotary isolators and changeover switches.................................................................................................................................. 20
Exel – distribution fuseboards..................................................................................................................................................... 21
HRC cartridge fuselinks, carriers and bases................................................................................................................................ 22
ENCLOSED MOTOR, HEATING AND LIGHTING CONTROL.................................................................................................... 24
POWER FACTOR CORRECTION CAPACITORS......................................................................................................................... 26
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
5
1.1
Product overview
Type A, SPN 125A distribution boards
IP3X robust steel enclosure
to suit all applications
Modern, curved full door, covers all devices
Twist action handle, with optional
door barrel locks also available
Hinged doors provide 180°
opening for easy access
Removable gland plates are provided
top/bottom for ease of installation
High quality clear sub circuit
identification labels
Cover screwed by means of
combination screws
Dual rated MCBs 10/15kA to
New 125A Switch Disconnector
incomer option
IEC 60898 and IEC 60947-2 from 1A–63A
Features & benefits
General characteristics
• Unique ‘full form’ blanking modules for unused MCB
ways. Provides secure shrouding of unused busbar stabs
for increased electrical safety. Blanking modules have
interlinking form for improved positional security.
Eaton’s Memshield 3 MCB Distribution boards have
evolved through an intimate knowledge and feedback from
Electrical Contractors to provide solutions to a wide range of
electrical distribution applications in commercial buildings.
Memshield 3 delivers safe, reliable and high performance
protection of electrical power distribution systems.
• Main busbar is removable for flexible installation.
• Fully shrouded Neutral busbar for increased safety.
• Choice of metering option to suit application needs and aid
compliance with latest Building Regulation – part L2.
• Door opens 180° to provide easy access and device operation.
• Standard incomer Switch Disconnector rating of 125A
provides higher rated solution for commercial buildings.
Type A Distribution boards are fully type tested with a
conditional short circuit rating of 15kA to BS EN 61439.
Associated devices are high performance MCBs, developed
for Commercial and Industrial applications, dual rated at 10kA
IEC – 60898 & 15kA IEC 60947-2 in B, C or D curves.
• Optional coupling kit available to electrically connect
two distribution boards together vertically from a single
supply cable to expand number of MCB ways.
6
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Product overview
Type A, SPN 125A distribution boards
Maximised wiring space for RCBOs when
incorporated within the installation
1.1
Fully shrouded Neutral busbar
for increased safety
Easy access earth bar can
accommodate up to 25mm2 cables
Combination scew heads on all devices
Unique “full form” blanking
modules for unused MCB ways
Stand-off foot form for stable installation
Type A SPN distribution boards
Incoming devices
The SPN boards are rated at 125A as standard and available in
5 sizes with a choice of 4, 7, 10, 13 and 16 single pole outgoing
ways. A choice of metering solutions are available as standard,
providing clear electrical consumption information as well as a
permanent capability of visualising information on a variety of
other electrical parameters. The metering options have been
developed to provide simple solutions to aid compliance with
part L2 of the Building Regulations of England and Wales. A wide
range of accessories including full profile blanking modules for
unused MCB ways and door locking options, enhance electrical
safety, whilst clean earth kits and vertical inter-connection kits
to join two boards together, improves versatility of the range.
A range of incoming options are available, with the 125A SPSN
switch disconnector being the most popular. In addition, there
are a number of 100A RCCB options, which provide the added
security of earth fault protection, covering 30mA–300mA
applications. A direct connection terminal arrangement is also
available for applications not requiring local isolation. Type A
distribution boards can be stacked vertically to expand the
number of outgoing ways using the vertical interconnection kit.
For larger SP applications, requiring more outgoing ways – see
our type B distribution boards with Single phase kit options.
Type A SPN pan assemblies
The SPN pan assemblies offer a high degree of flexibility
for custom applications and inclusion in other factory built
assemblies. SPN types are rated at 125A and available
with 4, 7, 10, 13, and 16 single pole outgoing ways.
Outgoing devices
For type A distribution boards, there is a choice of single pole
MCBs plus RCBOs. MCBs are available in current ratings from
1A–63A, with trip types B, C and D, 10kA to IEC 60898 and 15kA
to IEC 60947-2. RCBOs to IEC EN 61009 10kA are also available
in a choice of trip sensitivity options from 10mA–100mA.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
7
1.2
Product overview
Type B, TPN 125A/250A distribution boards
Removable gland plates are provided
top/bottom for ease of installation.
IP42 gland plate kit option
Modern curved edges enhance
appearance of board
IP4X robust steel enclosure to suit
all applications. IP42 available
with gland plate accesory
Twist action access handle, with optional
door barrel locks also available
Gland plate
4 x screws, nuts
and washers
provided
Cable trunking
Covers fit within enclosure dimensions
allowing adjacent mounting
Existing case end screws
Cable trunking interface kit available
Cable trunking interface kit fitting diagram
Removable front door to aid
accessibility to devices
High quality clear sub circuit
identification labels
Secondary cover slides over two
location screws at bottom of
board for easier fastening
Features & benefits
• Welded ‘case end’ design board with removable gland plates
provides super ‘stiff’ construction, even with gland plates
removed. Construction virtually eliminates distortion during
installation, ensuring final assembly fit and alignment.
• Additional Functional Earthing options and Clean Earth options
available.
• Unique cable trunking interface kit simplifies mounting of cable
trunking and protects cables.
• Removable door aids installation and ‘easy hang’ hinge design
makes re-attachment of door simple.
• Improved Neutral cable clamp design for simple & secure cable
connection.
• Unique ‘full form’ blanking modules for unused MCB ways,
provides secure shrouding of unused busbar stabs for increased
safety. Blanking modules have interlinking form for improved
positional security.
• Auto-formed, curved construction of main cover adds to board
rigidity, with improved appearance.
• 125A Switch Disconnector Incomer for general commercial
building applications.
• 250A options on 18 and 24 way boards.
• Compact 250A options on 18 and 24 way boards, where used
with cable trunking.
• Removable busbar assembly to assist installation.
8
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Product overview
Type B, TPN 125A/250A distribution boards
1.2
General characteristics
Eaton’s Memshield 3 MCB distribution boards have evolved
through an intimate knowledge and feedback from electrical
contractors, consulting engineers and end users to provide
solutions to a wide range of electrical distribution applications in
commercial buildings. Memshield 3 delivers safe, reliable and high
performance protection of electrical power distribution systems.
Type B distribution boards are fully type tested with a
conditional short circuit rating of 25kA to BS EN 61439.
Associated devices are high performance MCBs, developed
for commercial and industrial applications, dual rated at 10kA
IEC – 60898 & 15kA IEC 60947-2 in B, C or D curve.
Where used with 250A sized incomers, an extension
box or the provision of suitable sized cable trunking is
required to accommodate incoming cabling. A new cable
trunking interface kit is available to provide additional
mechanical protection of incoming cables.
A choice of metering solutions are available as standard,
providing clear electrical consumption information as well as a
permanent capability of visualising information on a variety of
other electrical parameters. The metering options have been
developed to provide simple solutions to aid compliance with
part L2 of the Building Regulations of England and Wales.
A wide range of accessories including full profile blanking modules
for unused MCB ways and door locking options, enhance electrical
safety, whilst clean earth kits improve versatility of the range.
Type B TPN standard distribution boards
Incoming devices – 125A standard TPN board
The optimised design for 125A TPN applications provides a
choice of boards in sizes – 4, 6, 8, 12, 18 and 24 TP ways. 12,
18 & 24 TP way variants are also suitable for 250A applications,
where the number of MCB ways could require a larger supply
current rating. A choice of incomers are available to suit different
applications including RCCB options and a single phasing
kit to provide a large single phase board arrangement.
The most popular choice will be the 125A switch disconnector
incomer option, but other choices include a 4-pole TPSN, 2P
SPSN, a range of RCCB switches and a contactor controlled
incomer with switch disconnector for remote control of
the supply to the board. A direct connection option is also
available for applications that do not require local isolation.
Increased width of board to 440mm
to maximise wiring space
Combination screw heads on all devices
Dual rated MCBs 10/15kA to IEC 60898
and IEC 60947-2 from 1A–63A
Unique “full form” blanking
modules for unused MCB ways
Terminal shield covers for increased safety
125A incomer kits available as
standard with 250A incomer options
for 12, 18 & 24 way boards
Reversed Earth & Neutral bar
assembly, to ease installation and
improve access for testing
Type B SPN pan assemblies
The TPN pan assemblies offer
a high degree of flexibility
for custom applications and
inclusion in other factory
built assemblies. 125A TPN
types are available with 4, 6,
8, and 12 triple pole outgoing
ways. 250A TPN types are
available with 12, 18, and 24
triple pole outgoing ways.
Improved neutral box clamp
with disconnection link
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
9
1.3
Product overview
Type B, TPN 250A distribution boards
125A/250A board
High load 250A board
18mm MCB only
18mm + 27mm MCB
Ways
18mmWays27mm
6
8
250A incomer option on 12,
18 and 24 way boards only
16
12
18
24
125A within standard enclosure
4
0+2
4+2
6+2
10+2
16+2
22+2
Integrated cable box as standard
Type B, TPN 250A distribution board solutions
Cable box or cable trunking
required for 250A incomer option
440mm
440mm
High load board has adequate
integral cabling space and no
extension box is required
Type B TPN 250A High Load distribution boards
Removable gland plates are provided
top/bottom for ease of installation
Removable front door to aid
accessibility to devices
Covers fit within enclosure dimensions
allowing adjacent mounting
10
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Modern, curved edges enhance
appearance of board
Choice of SP & TP 18mm dual rated
MCBs 10/15kA to IEC 60898 and
IEC 60947-2 from 1A–63A
Two TP 27mm MCB ways, rated up to 125A
Secondary cover, slides over two
location screws at bottom of
board for easier fastening
Product overview
Type B, TPN 250A distribution boards
1.3
Type B TPN 250A High Load distribution boards
Outgoing devices
Developed to respond to the needs of modern commercial
building applications, a new 250A TPN range of MCB
boards delivers increased versatility by having the ability to
supply and protect sub loads up to 125A. Based principally
around standard 18mm MCBs and RCBOs, this range
has provision for two TP 27mm MCBs, up to 125A.
For type B distribution boards, there is a choice of single
pole or triple pole MCBs plus SP and TP RCBOs. MCBs are
available in current ratings from 1A–63A, with trip types B, C
and D, 10kA to IEC 60898 and 15kA to IEC 60947-2. RCBOs to
IEC 61009 10kA are also available in a choice of trip sensitivity
options from 10mA–100mA. For the 250A “High Load” board,
provision is given to accommodate a number of 27mm MCBs
available in SP or TP sizes from 20A–125A to IEC 60947-2 .
Available in sizes 2, 6, 8, 12, 18 and 24 TP ways, of which
two ways are dedicated to the 27mm MCBs. 27mm MCBs
are available SP or TP with ratings from 20A–125A.
Incoming devices – 250A TPN board
and 18/24 way 125A board
These incomer options can be used with the 250A board
or with the 18 or 24 way variant of the 125A board to
provide a greater choice of solutions at 250A.
The most popular choice will be the 250A TPN switch
disconnector incomer option, but other choices include
a 4-pole TPSN switch disconnector, a choice of MCCB
incomers from 160A to 250A and a contactor controlled
incomer pack. There is also a direct connection option
available for applications that do not require local isolation.
Combination screw heads on all devices
Terminal shield covers fitted
for increased safety
Complete range of incomer kits available
Maximised wiring space integrated
in the board length
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
11
1.4
Product overview
Distribution board metering solutions
200A TPN type B distribution board, with
integrated split meter for power/lighting
Metering solutions – type A metered boards
• TPN distribution board with ‘smart’
meter for power and lighting loads.
• Split load versions utilise a two channel
meter, feeding two independent busbars
and groups of MCB/RCBOs.
• Unique meter design calculates net values
for each busbar section and total board load.
• Meter has both Pulsed and
Modbus outputs as standard.
• Split load versions provide independent
monitoring of “Power” and
“Lighting” loads and total load.
• Embedded vt technology and RJ 11
connections at meter minimises visible wiring.
• Aids compliance with Part L2 of the
Building Regulations (England & Wales).
• Supplied complete with factory fitted 200A
Switch Disconnector incomer switch.
• See page 127 for dimensions.
• Suitable for TPN and SPN applications
as supplied (shorting link included).
• Increased earthing options
supplied as standard.
The feature packed Eaton
meter packs and boards
To meet the needs of part L2 of the Building
Regulations introduced in England and Wales in
2006, Eaton’s Memshield 3 meter packs provide
simple integration with matched aesthetics. The
EBMMPCT250 employs a multi-function, DIN rail
mounted meter to measure electrical parameters
on LV supplies to TPN distribution boards. It can
also be used to meter single-phase loads. The
unit is supplied complete with CTs and wiring
terminals. This version is suitable for 100A–250A
applications and as well as a pulsed output
for kWh, the meter can be used to monitor
other parameters, including line voltage and
current. Electrical connection to the associated
distribution board does not occupy any of the
outgoing circuits. Modbus and MID certified
meter versions are also available – see page 36.
The EBMMPDC120 is supplied as a 120A direct
connection solution, not requiring CTs. Cabling
is simple and the meter provides a pulsed
output for kWh. The meter is an MID certified
unit, providing clear kWh information.
Double meter pack for two standard TPN
distribution boards facilitate separate
monitoring of “small power” and
“lighting” from one main supply.
For single phase EAM boards, a 65A meter
pack provides simple integration. (Amps, kW,
kWh, kVar and kVarh pulsed output, MID
compliant. See page 32 for single phase
EAM boards with factory fitted meters,
including split power and lighting boards.)
12
• Type A SPN boards with integrated meter.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Metering solutions – type B
meter pack assemblies
Eaton’s Memshield 3 meter packs provide
simple integration with matched aesthetics.
Split metering for separate small power and
lighting has been added to the range to meet
the needs of the L2 Regulations introduced in
England and Wales in 2006. The meters provide
a pulsed output for kWh and display other
useful parameters, including line voltage and
current. Modbus versions are also available
and provide remote access to additional
electrical parameters. For details refer to
page 36. For dimensions refer to page 127.
Product overview
Distribution board switch and protection devices
Miniature circuit breakers (MCBs)
1.5
Toggle colour for commercial MCBs changes
dependant on the rating as shown below:
The Eaton range of 10kA/15kA high
performance miniature circuit breakers
(MCBs) have been designed to meet the
latest UK, European and international
standards, with ratings from 1A up to 63A.
< 2A
16A
The Eaton miniature circuit breakers are
designed and tested in accordance with
BS EN 60898 and are available in B, C and
D characteristic curve as standard.
2A
20A
Technical characteristics
4A
25A
6A
32A
8A
40A
10A
50A
13A
63A
• Modular design, DIN rail mountable.
• 1, 2, 3, and 4-pole MCBs for commercial
and Industrial applications.
• Rated braking capacity 10kA to IEC
60898 and 15kA to IEC 60947-2.
• Rated currents from 1–63A in B,
C and D characteristics.
• Positive contact indication.
• Box clamp barrier to prevent
incorrect cable/busbar insertion.
• Calibrated at 40° C.
• Can be used with both pin and
comb type busbars.
• Suitable for use in Eaton Memshield 3
distribution boards and a wide
range of other applications.
Residual current circuit breakers (RCCBs)
The Eaton range of residual current
circuit breakers without integral overload
protection (RCCBs), provide protection
solutions to a wide range of applications.
Residual current circuit breakers with
overcurrent protection (RCBOs)
The Eaton range of combined residual current
circuit breakers with integral overload protection
(RCBOs), combine the highest level of protection
for both people and circuits for both single
phase / single module and three phase / four
module devices. Fully comply to IEC 61009.
Technical characteristics – single phase RCBOs
• Available from 6A to 45A in types B and C
trip characteristics with a choice of 10mA,
30mA, and 100mA trip sensitivities.
The Eaton range of 2 and 4-pole RCDs are
available with 10mA, 30mA, 100mA and
300mA sensitivities, and can be equipped
with a wide range of modular accessories
Technical characteristics
• Modular design, DIN rail mountable,
2 or 4 modules wide.
• Double and four pole RCD for commercial
and industrial applications.
• Rated short circuit capacity
10kA with fuse back up.
• Compact modular design, DIN rail
mountable, one module wide.
• Trip sensitivities 10, 30, 100 and 300mA.
• Suitable for use in Memshield 3 single
and three phase distribution boards.
• Positive contact indication.
• Unswitched neutral.
• Test trip button.
• Positive contact indication.
• Rated currents from 16–100A.
• Rated breaking capacity 10kA.
• Trip test button.
Technical characteristics – three phase RCBOs
• Options from 6A to 32A in type B, C, and D
trip characteristics with a choice of 30mA,
100mA, and 300mA trip sensitivities.
• Compact modular design, DIN rail
mountable, four modules wide.
• Suitable for use in Memshield 3
three phase distribution boards.
• Unswitched neutral.
• Positive contact and earth fault trip indication.
• Rated breaking capacity 10kA.
• Trip test button.
The RCBO takes up 4 pole ways in a 3-phase
distribution board, i.e. L1 / L2 / L3 and the 4th
pole of the device fits over, and is insulated from,
the L1 phase position of the neighbour circuit.
Therefore the neighbour circuit only has two phase
circuits available for single phase circuit feeds.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
13
1.6
Product overview
Modular control and switching devices
Switches and Twilight Switches
Timers & Twilight Switches are applied in any residential, commercial and industrial buildings wherever automatic control
is required on predefined times and/or depending on daylight intensity.
The Eaton range comprises of a wide variety of different products which include analogue Timers, digital Timers, Twilight
Switches and Staircase Timers.
These Timers can either be controlled by a 50 Hz netsynchronisation, quartz control and time synchronisation or using the
DCF signal or GPS antenna, which guarantees 100% accuracy at all times. Except for net-synchronised timers all units
do have self power reserve to secure the time setting and program storage in case a power interruption does occur.
Dedicated computer software and memory cards are available to support the programming of our most advanced timers.
Automatic summer and winter time, holiday and random switching programs complete the functionality of our range.
Twilight Switches are supplied with a remote light sensor, which can be easily installed on the outside wall
where the required light intensity threshold can be simply adjusted on the modular device itself.
Technical characteristics (depending on type)
• Modular design.
• Analogue and digital timers.
• Time adjustment by 50 Hz net, quartz control, DCF1) or GPS signal reception2)
• Manual override switching function.
• Power reserve for all quartz and DCF or GPS driven switches.
• Remote Light Sensor for Twilight Switching.
Benefits
• Easily programmable on front of device.
• Computer aided programming software available.
• Compact 18 mm design for restricted space opportunities.
• Separate IP40 covers are available for direct wall mounting.
• High level of accuracy.
• Automatic summer and winter time adjustment.
• Holiday & Random program settings.
• High power reserve up to 10 years.
Notes: 1) Automatic calculation of sunrise and sunset times throughout the year, including the possibility of astro times + / -2 hour shift.
2) The DCF-signal can only be received within a 1000 km radius.
Contactors and impulse switches
Contactors are frequently applied for switching of lamp loads, fans or pumps in both utility as well as industrial areas.
Eaton’s “CR” contactors are very specific due to the applied operating coil and the construction of the main contacts.
All contactors with ac/dc coils ensure silent operation which is further enhanced by a low power consumption.
Optimal contacts and low heat dissipation guarantee a long lifetime of the contactor which is available in a wide range of
characteristics.
Technical characteristics
• Designed according to IEC 60947-4-1 and IEC 61095 standards.
• Suitable for applications in general control, heating & lighting applications.
• Available in 20, 25, 40 & 63 A ratings with up to 4-pole contacts.
• Optional add-on auxiliary contact available.
• DIN modular profile.
• Spacers available to extend lifetime (it is recommended to use 1 spacer between every 2 contactors installed).
• Day/night contactors available with manual override function.
Advantages of Eaton contactors
• Low inrush power for all ac/dc types.
• Availability of combined ac/dc type contactors ensure silent operation.
• Contactors of ac/dc coil type are operable on both ac and dc voltage. The 20 A and 25 A versions are also available
with ac coil. All combined ac/dc type versions are equipped with surge protecion on the operating coil.
• Equipped with contact indication.
• Optimal quality of contacts and low heat dissipation ensure a long life time.
14
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Product overview
MCCB panelboards and pan assemblies
1.7
The feature packed Memshield 3 MCCB
panelboard distribution system
A complete range of MCCB panelboards and pan assemblies
providing all the options you need from a straightforward
panelboard to a comprehensive panelboard system. The range
now offers a variety of incoming devices and a greater choice of
outgoing ways to provide more flexibility and choice to the user.
• 250A, 400A, 630A & 800A panelboard versions available.
• Can be configured for incomer device at top of panelboard.
• 3 or 4 pole incoming devices can be fitted.
• 4 to 18 outgoing TP ways.
• Outgoing MCCBs up to 400A, available in
25, 36 and 50kA breaking capacity.
• All TP & 4P MCCBs have adjustable thermal and magnetic trip
units as standard except for 630A and 800A incomer MCCBs
which are fixed thermal / adjustable magnetic trip. MCCBs with
additional trip unit functionality are available to special order:
•
Distribution circuit protection, electronic.
•
Motor protection, thermal/magnetic.
•
Motor protection, electronic.
•
Motor protection without overload release.
•
Selective (discriminative) and generator protection, electronic.
• IP3X construction.
• Form 3b type 2 segregation.
• Tin–plated busbar systems throughout the range.
• Incoming and outgoing metering options to ensure Part
L2 Building Regulations compliance. Plug-in cabling
system provides for faster and error-proof installation.
• Reliable & safe operation assured through
DEKRA testing & certification.
• Wide range of extension boxes, metering, surge protection,
and earth leakage incomer options available.
• Versatile solution, accommodating different frame size
outgoing MCCBs to best match application needs.
• Enhanced safety through fully shrouded incoming
devices, to protect against contact with live parts.
• Blanking plates finger protect unused outgoing ways.
Factory built assemblies
• Complete factory built assemblies can be specified for individual
projects, on which the factory will be pleased to advise.
• Simple derivatives include: The fitment of side extension
boxes, dual incomers and metering options etc.
• Through a modular panelboard system, more custom
solutions can be accommodated to include:
Option to remove top and bottom cross rails provides the ability
to lay cables into the board instead of feeding them through
the gland plate aperture, resulting in big time savings.
• 4-pole switching options.
• Fused combination switch options for both
incomers and outgoing ways.
• Form 4 type 2 solutions.
• For more details on these services please contact
our customer support team on 08700 545 333.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
15
1.8
Product overview
Surge Protection Devices
Surge protection devices (SPD) for MCB distribution boards and MCCB panelboards
In order to enable designers, specifiers, and installers to comply with surge protection requirements
in BS 7671 - IET Wiring Regulations - 17th Edition (Section 534), Eaton has a combined lightning
current and surge arrester, as well as an individual surge arrester to provide a coordinated
solution for lightning protection and surge suppression fully tested to BS EN 62305. This range of
coordinated enclosed kits provides peace of mind that all equipment has comprehensive transient
overvoltage protection caused by lightning strokes and switching in low voltage systems.
Surge arrester protection for distribution boards
EM3SSK1T2 (SPN distribution boards) & EM3SSK3T2 (TPN distribution boards) technical summary:
• For the protection of low voltage distribution systems against transient
overvoltage caused by indirect lightning strike and switching operations.
• The 3+1 circuit offers a universal solution for surge protection in low voltage distribution systems.
• Suitable for TT- and TN-S systems according to IEC 60364-5-53 Clause 534.
• Test class II according to IEC 61643-1+A1.
• SPD-type T2 according to EN 61643-11.
Combined lightning arrester and surge arrester protection
for distribution boards and panelboards
EM3SSK3T12 (TPN distribution boards) & EPBN1SPD123 (panelboards) technical summary:
• Lightning protection classes III and IV in accordance with IEC 62305.
• For the protection of low voltage distribution systems against transient overvoltage
caused by direct and indirect lightning strike and switching operations.
• Application according to IEC 60364-5-53 Clause 534.
• Test class I, II, III in accordance with IEC 61643-1.
• SPD-type T1, T2, T3 in accordance with EN 61643-11.
Combined lightning arrester and surge arrester protection for panelboards
EPBN1SPD1234 technical summary:
• Lightning protection classes I, II, III and IV in accordance with IEC 62305.
• For the protection of low voltage distribution systems against direct lightning
strike into the overhead power supply line or external lightning protection
system and against indirect lightning stroke and switching operations.
• Application according to IEC 60364-5-53 Clause 534.
• Test class I, II, III in accordance with IEC 61643-1.
• SPD-type T1, T2, T3 in accordance with EN 61643-11.
• No discharge of ionised gases during operation.
16
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Product overview
Industrial switch & fusegear
1.9
Glasgow fuse-switch-disconnectors & switch-disconnectors
For many years, the Glasgow product name has been synonymous with quality, trust and reliability
and as part of our long standing commitment to its tried and tested design we’ve reinvested
for the future by re-tooling the whole range. All units are supplied with fuselinks or switchlinks
fitted. Glasgow fuse switch disconnectors and switch disconnectors meet the constructional
requirements for isolation of and are type tested to BS EN 60947-3. Conditional short circuit
current rating tests at a value of 80kA rms Ue 415V have been carried out with Eaton HRC fuses
fitted. Five frame sizes are available to provide a range from 63A to 800A, with utilisation category
AC22A and AC23A Ue 415V ratings. Switch-disconnectors fitted with copper links give assigned
AC20A Ui 660V and AC21A Ue 415V ratings. All units have retractable operating handles which
drive overcentre mechanisms incorporating powerful operating springs. Opening and closing of
the switches is thus independent of the action of the operator. Moving contact assemblies can
be removed to facilitate installation or for contact inspection or renewal. Flag “on-off” indication is
provided and terminal cover shields prevent contact with live metal. TPSN indicates triple-pole and
switched neutral, the neutral pole making first and breaking last. Rated Insulation Voltage Ui 660V.
Enclosures
Surface-mounting enclosures comprise heavy gauge steel body plates incorporating cast iron
frame members and are rustprotected, with a light grey paint finish (RAL7004). Front access
doors, which are detachable, are fitted with dust-excluding gaskets and are interlocked to
prevent opening when the switch is ‘on’. The interlock can be defeated by a competent person
for maintenance purposes. Operating handles may be locked in both the ‘on’ and ‘off’ positions.
Castell type interlocks can be supplied to special order. Internal fixing holes allow units to
be mounted closely side by side and all models have removable top and bottom end plates.
These are pierced for connections, divided into front and rear (fixed) portions to simplify cabling
using Eaton’s MEM series split-type cable boxes, and provided with undrilled cover plates.
Fuses
Glasgow units are designed for use with HRC cartridge fuse links to BS88: Part 2. 63A and 100A
units employ off-set contact fuse links. Details of suitable types of HRC cartridge fuse links are
listed on page 101. All performance tests have been carried out using Eaton BS88 fuselinks.
Motor ratings
The motor ratings assigned to TPN switch-disconnector units are utilisation category AC23A
(frequent operation) to BS EN 60947-3, which calls for make and break testing at 10 and 8
times rated current respectively for units having a motor rating up to and including 100 Amps.
Ratings for switch-disconnector-fuses are dependent on suitable HRC fuses being fitted.
Auxiliary equipment
A comprehensive range of extension boxes and spreader boxes is available. Units are
fitted with HRC Fuselinks of maximum rating but will accept fuselinks of a lower rating,
refer to the Paramount HRC Fuselinks section on page 101. SPSN and TPSN indicate
switched neutral. Neutral makes first and breaks last. If DP fuse-switch-disconnectors are
required, use SPSN and replace the supplied switch link with a compatible fuselink.
Definitions of utilisation category
AC20a – Connecting and disconnecting under no load condition.
AC21a – Switching of resistive loads including moderate overloads.
AC22a – Switching of mixed resistive and inductive loads including moderate overloads.
AC23a – Switching of motor, or other high inductive loads.
Cable extension boxes
Fabricated sheet steel boxes boxes can be fitted top/bottom of Glasgow switch units to provide
additional space for spreading multi-core PVC insulated cables with solid aluminium conductors
and for some larger cables with stranded copper conductors. For 1–3PCB, a plain flame retardant
plywood plate is provided for fitting between the box and switch unit, the steel endplate supplied
fitted to the switch unit being used on the box’s cable entry side. For 4PCB, a plain steel plate is
provided for cable entry on box. The switch enclosure has 8mm thick insulated endplates fitted
both ends. For 5–6PCB, a 10mm thick insulated plate is provided for cable entry on box. The switch
enclosure has 10mm thick insulated endplates fitted both ends, 5PCB includes a flame-retardant
plywood packer for fitting between PCB and switch unit’s endplate to provide lid flange clearance.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
17
1.9
Product overview
Industrial switch & fusegear
Spreader boxes
Cast metal split pattern, supplied with fixing bolts and plain bushes. Two types are available,
suitable for straight or angled entry. They permit conductor spreading of larger PVC cables
and fit directly on to Glasgow fuse-switch-disconnectors and switch-disconnectors.
Glasgow busbar chamber system
Eaton’s busbar chamber system is designed to provide either compact, wall-mounting installations
or – by using optional pedestal sets – easily assembled switchboards. Every facility is provided
to enable Eaton’s switchgear and distribution gear to be mounted easily and economically to
busbar chambers which can be applied either to a suitable load-bearing vertical surface; or,
by means of a pedestal set, affixed to a vertical surface which need not be load-bearing.
Busbar chambers
These are produced in 100, 200, 400, 630 and 800 Amp. ratings and in four nominal lengths.
100, 200 and 400 Amp units are available in all four sizes; 630 and 800 Amp ratings are offered in
the three longest units only. All units in the range share the same height and depth dimensions.
Similarly the twin busbars are located in precisely the same positions throughout the range and
vary in size only in their front-to-back dimensions according to rating. Detachable end plates enable
all units to be extended by coupling to a second busbar chamber using extension sets. Both top
and bottom plates are also readily detachable so that marking out and machining can be carried out
conveniently on a bench to accommodate Eaton’s switchgear either above or below the chamber.
Complete mounting kits, including templates, are available for mounting all Exel and Glasgow
switchgear. Eaton chambers are fabricated from rust-protected sheet steel with a light grey paint
finish. They have been type tested to BS EN 61439 with a rated conditional short circuit current
rating of 63kA at Ue 550V and a rated short-time withstand current Icw 20 times nominal rated
current for one second. They are designed for use in factory-built assemblies to BS EN 61439. All
chambers are subjected to an on-line dielectric test unit which provides a high voltage test between
poles; and from poles to earth. Earth continuity is also tested. Rated insulation voltage 660V.
Connection sets for Glasgow fuse-switch-disconnectors & switch-disconnectors
Cable clamps covering all ratings are available for switchgear up to 200A. For connecting
Glasgow units of 160A and above, solid copper connection sets are recommended as cost
effective and convenient. These comprise pre-formed, insulated links in 4-pole sets supplied
with all necessary clamps and fasteners. The appropriate switchgear mounting set (41,
51 or 61 BBMS) must be used with connection sets for 160–800A Glasgow units.
Busbar cable clamps and sockets
Incoming main cable clamps or sockets are not supplied due to the wide range which would
be necessary to meet all requirements. Busbar cable clamps comprise plated brass U-clamps
and steel slides with all bolts and washers. They are suitable for the connection of small
solid or stranded copper conductors and also aluminium conductors using a barrier grease.
Busbar cable sockets are plated brass castings complete with clamps and fixings, suitable
for the termination of either copper or aluminium conductors. Both clamps and sockets
allow for clamping on the busbars without drilling. For cabling direct on to busbars of 630–
800A rating a special cable extension is required which can be made to special order.
Switchgear mounting sets
Available for all ratings of Exel switch-disconnectors/switchdisconnector fuses and Glasgow
fuse-switch disconnectors and switchdisconnectors enabling these units to be mounted
simply and efficiently either above or below the busbar chamber. Each mounting set
comprises a template with instructions for machining the top/bottom plate of the busbar
chamber; clamping channels, ready pierced for fasteners; all necessary fastenings; and,
for Glasgow units, insulated shields and switch filler plates where appropriate.
18
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Product overview
Industrial switch & fusegear
1.9
Exel 2 switch-disconnectors & switch-disconnector fuses
Exel 2 switch disconnectors and switch-disconnector fuses meet the constructional requirements
for isolation of and are type tested to BS EN 60947-3. Switches are of the quick make and break
type, suitable for use on AC or DC. Units have removable moving contact assemblies to facilitate
wiring. Exel 2 surface-mounting enclosures are fabricated from rust-protected sheet steel with a light
grey paint finish. Removable blank top and bottom end plates (except for 20 and 32A top end plates
which incorporate knockouts) and gasket doors give IP41 protection. Chromium-plated front operated
handles, with “ON (I) OFF (O)” indication, and internal fixing enabling units to be mounted closely
side by side. Interiors comprise porcelain bases fitted with non-ferrous conducting components.
Fuses and fuse carriers
HRC fuse carriers are designed for offset contact fuse links to BS 88: Part 2. Eaton HRC fuse links
fitted to switchdisconnector- fuses are suitable on systems up to 415V AC. Eaton fuses used in
these products are also suitable for 250V DC systems. All performance tests have been carried out
using Eaton BS88 fuselinks. Units are fitted with HRC Fuselinks of maximum rating but will accept
fuselinks of a lower rating, refer to the Paramount HRC Fuselinks section on page 101. HRC pattern
switchfuses are fitted with type SCH carriers (20A, 32A, 63A-moulded; 100A, 125A-porcelain).
Motor ratings
The motor ratings assigned to TPN switch-disconnector units are utilisation category AC23A
(frequent operation) to BS EN 60947-3, which calls for make and break testing at 10 and 8
times rated current respectively for units having a motor rating up to and including 100 Amps.
Ratings for switch-disconnector-fuses are dependent on suitable HRC fuses being fitted.
Cable size
Maximum cable sizes are: 20A–6mm2, 32A–10mm2, 63A–35mm2, 100/125A–70mm2.
Type test compliance with standards
This range has been satisfactorily type-tested in accordance with
BS EN 60947-3 with Eaton HRC fuselinks fitted.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
19
1.9
Product overview
Industrial switch & fusegear
Rotary isolators
Local switch-disconnectors standard duty, 20–63A, IP65, 3, 3+N, 6, and 8 poles
Complying with IEC/EN 60947-3, VDE 0660, and IEC/EN 60204, the surface
mounting range of rotary switch disconnectors are suitable for on load switching of
general distribution a.c. power circuits and infrequent duty motor isolation.
Light grey, moulded silicon and halogen free thermoplastic enclosures provide protection
to IP65 making them suitable for most indoor and outdoor environmental conditions.
These compact isolators are fitted with red/yellow operating handles
padlockable in the ‘OFF’ position with up to three padlocks.
The enclosure design allows for easy access for cabling. Solid neutral
and earth termination points are a standard feature.
Changeover switches
20-100A, IP65, 4 pole
Suitable for on-load control of alternative supplies. Surface mounted, 4
pole on-load changeover switches have a rated voltage of 690V.
Switches comply with IEC/EN 60947-3, VDE 0660, IEC/EN 60204.
In all cases ample cable space is provided for both incoming and outgoing cables.
Each unit is provided with an insulated IP65 black handle which may be padlocked
in the ‘OFF’ position. Clear ‘ON’ (I) and ‘OFF’ (O) indication is provided.
20
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Product overview
Industrial switch & fusegear
1.9
Exel – distribution fuseboards
The Exel fuseboard range is available with standard enclosures to IP4X for the complete range of 20A
to 200A distribution boards. A variety of extra features have been incorporated in the range including
increased cabling space, superior door latches and locking devices (there is a choice of barrel lock
or padlocking device), improved lid hinges and a unique safety carrier which effectively blanks off a
single fuse-way allowing the circuit to be worked on in safety. Safety carriers have no provision for
accepting a fuselink. The Exel distribution fuse boards are designed to comply with the requirements
of BSEN 61439-2. All phase parts are fully shrouded so that additional circuits may be wired and
connected in safety whilst the existing circuits remain live and on load. The type of enclosure available
gives protection to IP4X and is supplied with removable endplates. The range covers a wide variety
of ratings from 20–200A; 20A and 32A with up to 12 ways in SPN and TPN configurations; 63A up to
8 ways, 100A up to 8 ways and 200A 4 way in TPN configurations. All ratings available with moulded
HRC carriers to BS88: Part 2. Testing has been carried out using Eaton ‘S’ type HRC fuselinks. Fuse
base mouldings are of high quality thermosetting material. The fuse units have skirted fuse carriers to
prevent accidental contact with live parts when inserting or withdrawing a carrier. Separate shields are
provided for the base contacts to prevent accidental contact when the carrier has been withdrawn.
All fuseboards are suitable for systems with a rated insulation voltage Ue 660V AC, 500V DC.
Safety carriers
A range of safety carriers are available for insertion in a fusebase when its normal
fuse carrier has been removed for isolation. The safety carriers are marked
yellow for identification and have no provision for fuselink fixing.
Enclosures
Rust protected sheet steel IP4X enclosures have a light grey paint finish and are fitted with internal
fixing holes. Enclosures have a robust, reliable construction. Enclosures for units from 20A to
100A are of all welded construction, 200A IP4X units have cast corner pieces. Removable top
and bottom endplates incorporate knockouts on 20A and 32A units while 63–200A boards have
blank endplates. Blank endplates are available on request for 20A and 32A boards. The enclosure
allows gasketed access doors to be reversed for left hand or right hand opening. All sides are
free from external projections and fuseboards can be mounted in inverted form if required.
Main terminations
32A, 2-way fuseboards have the main phase termination (tunnel type) attached to the fusebanks.
All other fuseboards have the main terminations mounted on the back of the enclosure and are
intended for use with cable sockets (sweating or crimp type) which are not provided. Busbar
and main terminals are fully shrouded. A cable shroud to cover the cable socket is provided.
Earthing and neutral bars
Multi-way earthing bars are fitted with an integral earth bolt and have an outgoing terminal per fuse.
They are rail mounted adjacent to the fully rated neutral bars. Neutral bars have main terminals of
the same capacity as the phase terminals and have one outgoing terminal per fuse. Earth/neutral bar
rails are fitted at the bottom of enclosures on 20A and 32A fuseboards and at the top on all others.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
21
1.9
Product overview
Industrial switch & fusegear
HRC cartridge fuselinks, carriers and bases
Eaton’s comprehensive range offers a selection of fuses to cater for many applications:
Compact 415V a.c. S type industrial fuselinks complying with BS EN 60269-1 (BS88
– 1) or BS88 – 2 with ratings from 2 to 1250A. Skilful design techniques have meant
that power dissipation has frequently been reduced despite the significant reduction in
barrel size. Many ratings have also been tested for use in circuits up to 250V d.c.
Compact 415V a.c. S type motor circuit protection fuselinks complying with BS EN 60269-1 (BS88
– 1) or BS88 – 2 with ratings from 20M25A to 400M500A. This extended range of fuselinks is
designed to withstand the inrush current associated with direct on line start motors whilst saving
cost on the size of equipment to which they are fitted by virtue of their small dimensions.
Compact 240V and 415V a.c. SS, SN and SP type offset blade contact
fuselinks complying with BS EN 60269-1 (BS88 – 1) or BS88 – 6 with ratings
from 2 to 63A for use in industrial and commercial installations.
Compact 415V a.c. J type feeder pillar fuselinks complying with BS88 – 2 (formerly BS88:
Part 5) for use by the Electricity Supply Industry in distribution systems. Ratings from
63–400A with 82mm fixing centres and 63–800A with 92mm fixing centres for wedge
tightening contacts and 63–250A in ferrule form for single phase pole mounted cut outs.
Eaton HRC fuselinks are manufactured to exacting standards using precision assembly methods
and undergo rigorous quality checking before dispatch including resistance testing all production.
This ensures that performance will be consistent and conform with published characteristics within
close tolerances. Type tests on Eaton equipment have been performed using Eaton fuselinks.
Eaton industrial and general purpose fuselinks have a breaking range and utilisation
category gG which replaces the old class Q1 fusing factor. “g” indicates a full range
breaking capacity fuselink and “G” indicates a fuselink for general application.
Eaton motor circuit protection fuselinks have a breaking range and utilisation category
gM indicating a full range breaking capacity fuselink for the protection of motor
circuits. These fuselinks have a dual current rating separated by the letter “M”.
The lower current rating is the maximum continuous rating which also determines the rating
and size of equipment to which the fuse is fitted. The higher current rating is the time current
characteristic of the fuselink which determines its ability to withstand the motor starting current.
Their selection frequently permits the use of lower rated switch and/or fusegear than would be
the case using gG fuselinks with a consequent cost saving. Type gG fuselinks however may still be
used and are the preferred option for assisted start motors where starting currents are reduced.
Eaton fuselinks are designed and manufactured in accordance with a Quality Management
System in accordance with ISO 9001. Most fuselinks are ASTA Certified for a breaking
capacity of 80kA at 415V a.c. and are endorsed ASTA 20 CERT showing compliance
with the rules of the ASTA 20 scheme which includes assessment of the Quality
Management System to ISO 9002 and detailed auditing of fuselink manufacture.
Eaton have for many years participated in developing and influencing fuse standards
through BEAMA and BSI at national level and IEC at international level and therefore
are able to produce designs incorporating forthcoming changes to standards.
22
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Product overview
Industrial switch & fusegear
1.9
Fuse carriers and bases – specification
A range of moulded HRC fuse units designed to accept bolt-in and clip-in HRC fuselinks.
Each unit is fully shrouded to prevent accidental contact with live parts when inserting
or withdrawing a carrier and once the carrier has been removed completely.
The carrier and base mouldings are manufactured from high quality thermosetting material.
Units accepting bolt-in HRC fuselinks are available in ratings of 20, 32,
63, 100 and 200A and can be supplied in front connected, front/busbar
connected, front/back connected and back connected versions.
They are designed to comply with BS88 – 2 and are suitable for systems up to 660V.
Suitable HRC fuselinks are also to BS88 – 2. A full range of neutral links is available.
Those units which accept the clip-in fuselinks are rated at 32A and 63A, 415V.
They comply with BS88 – 2 and accept clip-in HRC fuselinks to the same standard.
Clip-in type units allow fuselinks to be replaced very simply – no tools are
required. Fuselinks are removed from the carrier using side pressure on the
fuselink end tags while replacement involves a simple push fit only.
Terminal capacities: 20A 6mm2, 32A 16mm2, 63A 35mm2, 100A 70mm2, 200A 150mm2.
Fuse units are available in four types:
Type A – providing for busbar connection at one end and cable termination at the other.
Type B – providing for cable connection at each end.
Type C – with back connecting studs.
Type D – providing for cable connection at one end with back connecting stud at the other.
Fuse units have been ASTA certified to BS88 – 2 and are suitable for systems up to 660V.
100A fuse units may be fitted with SB3, SB4 or S0 fuselinks having
73mm fixing centres if used with adaptor 100MFLK.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
23
1.10
Product overview
Enclosed motor, heating and lighting control
Eaton’s wide range of Motor Control Gear and Heating and Lighting Control
equipment is an integral part of our single source commitment.
Since the late 1920’s we have built countless motor starters, fitted and trusted by generations of
contractors, while the increasing requirements of our markets have led us to constantly update and
expand our ADS range to allow for an increased choice of current ratings and ingress protection.
This wealth of experience and expertise in the design and manufacture of Motor Control Gear is
mirrored by our Heating and Lighting range which offers a versatile and comprehensive choice.
Standards
• IEC 60947-4-1
• VDE 0660
• IEC 60269
• BS EN 60947-4-1
ADS8 AC motor starters
Enclosures – moulded
• 9kW DOL max
• Tough polycarbonate in grey provides high IP protection to IP65
• Start and stop pushbuttons
• Internal earth terminals
• Cable entries – 20mm knockouts for M20 threaded glands
Enclosures – metalclad
• Attractively styled rust protected pressed steel finished in grey polyester powder paint
• Start and mushroom-headed stop pushbuttons
• Substantial earth terminal
• Cable entries – 20mm knockouts for M20 threaded glands
Switch-disconnectors
• Means of isolation and switching for mechanical maintenance
• Padlocking facility available
• Isolators type tested for on-load disconnection
• Interlocked with main cover
Overload relays
• Adjustable thermal pattern connected directly to contactor
• Ambient temperature compensated between -40°C to +60°C
• Phase failure sensitive relays
• Changeover trip contact
• Simple Auto-reset
Contactors
• Modern block type
• 6–15 x 106 mechanical and 1.5 x 106 electrical operations – AC3 duty.
• Provisions for fitting additional auxiliary contacts either N/O or N/C – depending on version
Optional fittings and specials
• Provision for various optional fitments on standard starters
• Special starter arrangements
24
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Product overview
Enclosed motor, heating and lighting control
1.10
MSU pushbutton control units
• The Push Button Units are supplied with robust plastic enclosure
to IP67, in one, two and three push button types.
• Complies with IEC/EN 60947-5
• Simplicity, versatility and robust construction successfully allied to attractive styling
• One, two and three button types available in a variety of configurations
• 3-button type M23MSUL supplied with 2 sets of button legends, FORWARD, REVERSE
and UP, DOWN. The required legend should be clipped onto the button as required
• Each contact block comprises 1 – N/O and 1 – N/C contact
• Start units are push to make (N/O)
• Stop units are push to break (N/C)
• Latching device where fitted holds stop pushbutton in depressed position
until latch is released by clockwise rotation of mushroom head.
• Various conduit knockout options on side and rear of enclosures
Autoline heating and lighting contactors
Open contactors
• 18A, 25A and 32A, 4-pole, with optional auxiliary contacts
Enclosed contactors
• 25A and 40A, 4-pole; 40A and 64A, 2-pole; 70A and 112A, single pole with fitted neutral link
• Robust pressed steel enclosures, rust protected with grey paint finish
• 220…240V units available with or without rectifiers for silent running
• 90-225A, 3-pole enclosed contactors can be supplied with switchdisconnector-fuse including HRC main fuses
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
25
1.11
Product overview
Power factor correction capacitors
Power factor correction capacitors
Active power
How can you economise?
Reactive power
A great deal of money is spent annually to achieve savings in
production methods, improved plant efficiency and optimum
lighting arrangements; essential in the highly competitive world
of industry today. However, poorly managed energy supplies
result in unnecessary, and avoidable wastage. Power factor
correction is the established method of reducing electricity costs
in industry and commerce. You can eliminate waste in electricity
consumption by improving your power factor and saving up to
20% on your electricity costs. This could also help you to increase
your output without the need to install new cables or extra supply
capacity. To find out more contact us for a power factor check.
SUPPLY
MOTORS
What is power factor correction?
Active power
Most loads on an electrical distribution system fall into one of
three categories; resistive, inductive or capacitive. In your own
plant, the most common is likely to be inductive. Typical examples
of this include transformers, fluorescent lighting and AC induction
motors. Most inductive loads use a conductive coil winding to
produce an electromagnetic field, allowing the motor to function.
Reactive power
Available active
power
All inductive loads require two kinds of power to operate:
• Active power (kwatts) to produce the motive force
• Reactive power (kvar) to energise the magnetic field
The operating power from the distribution system is composed
of both active (working) and reactive (non-working) elements.
The active power does useful work in driving the motor
whereas the reactive power only provides the magnetic field.
The bad news is that you are charged for both!
The objective, therefore, should be to reduce the reactive
power drawn from the supply by improving the power factor.
If an AC motor were 100% efficient it would consume only
active power but, since most motors are only 75% to 80%
efficient, they operate at a low power factor. This means poor
energy and cost efficiency because the Regional Electricity
Companies charge you at penalty rates for a poor power factor.
By installing capacitors to improve your power factor
you could SAVE MONEY on your electricity bill.
Additional potential benefits include:
• Reduction of heating losses in transformers
and distribution equipment
• Longer plant life
SUPPLY
MOTORS
CAPACITOR
leaving the capacitor working at a slightly lower output. Over
the years, your capacitors could have lost so much output that
you could be paying the penalty for a poor power factor.
Our engineers would be pleased to carry out a test on your
installation to determine whether it is running economically.
As the power factor drops the system becomes
less efficient. A drop from 1.0 to 0.9 results in 15%
more current being required for the same load.
A power factor of 0.7 requires approximately 43% more
current; and a power factor of 0.5 requires approximately
100% (twice as much) to handle the same load.
Do you have a problem with harmonics?
If you have…
• Nuisance tripping of circuit breakers or fuses blowing
• Erroneous operation of control system equipment
• Electronic communication interference
• Stabilised voltage levels
• Excessive heating and failure of transformers, motors,
capacitors, fluorescent lighting ballasts etc.
• Increase in capacity of your existing system and equipment
• Excessive neutral current
• Improved profitability
…you could have a harmonic problem.
What do I have to do to save money?
Our engineers will be pleased to check this for you.
200
% Current
Simply contact us on +44(0)121 685 2011 and we will arrange
for an engineer to carry out a power factor survey. This will
be done quickly, with no interruption to your operations and
with absolutely no obligation on your part. We shall then
be able to advise you of the savings you can achieve which
could be as much as 20% of your current electricity bill.
150
Do you need to take action if you already have capacitors?
Modern capacitors are made of metallised polypropylene film.
If they develop a fault, then instead of the whole capacitor
failing, only a small section of the metallisation burns away,
26
100
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
1
0.9
0.8
0.7
0.6
Power factor COS ø
0.5
Product overview
Power factor correction capacitors
1.11
Eaton capacitors non-auto range
The Eaton non-auto range of capacitors is designed for individual correction of motors,
transformers and other items of plant. The capacitors are manufactured in robust
steel cases suitable for the work place. They can be supplied with open terminals for
mounting within cubicles or other switchgear or with fully enclosed terminals for use
elsewhere. Single or three phase units are available in a wide range of sizes.
• Low loss • Self healing • Non flammable • Easily maintained • Environmentally friendly
Eaton capacitors non-auto application
Most AC electrical machines draw from the electricity supply apparent power in excess of the useful
power required by the machine. By connecting the Eaton capacitor into circuit, it is possible to reduce
the excess current. This saves energy and makes the most efficient use of your electricity installation.
Eaton capacitors non-auto construction
The capacitor consists of a number of low loss self healing elements assembled
in a robust steel case which is suitable for the work place.
Protection system
Each element is fitted with a protection system which ensures an
extended capacitor life and complete end of life safety.
Elements are self healing and have an over pressure double pole automatic
disconnect feature that ensures that if the element fails it is electrically safe.
Capacitor features
Low loss – less than 0.5 Watts per kvar, including discharge resistors.
Environmentally safe – The dry type construction eliminates flammable
impregnants and does not cause leakage or pollution problems.
Eaton capacitors 100
The Eaton 100 range of capacitors is designed for the automatic power factor correction
of industrial loads. The capacitors are manufactured in robust steel cases suitable for the
work place. The equipment is arranged to switch capacitors as the load requirement varies,
thus ensuring that the system power factor is maintained at an economic level.
• Low loss • Self healing • Non flammable • Easily maintained
• Environmentally friendly • Fully automatic control
Eaton capacitors 100 application
Most AC electrical machines draw from the electricity supply apparent power in excess of the useful
power required by the machine. By connecting the Eaton capacitor into circuit, it is possible to reduce
the excess current. This saves energy and makes the most efficient use of your electricity installation.
Eaton capacitors 100 construction
The capacitor consists of a number of low loss self healing elements
assembled in a robust steel case which is suitable for the work place. Each
unit is available with a fusebase/fuseswitch or MCCB incomer.
Protection system
Each element is fitted with a protection system which ensures an
extended capacitor life and complete end of life safety.
Elements are self healing and have an over pressure double pole automatic
disconnect feature that ensures that if the element fails it is electrically safe.
Capacitor features
Low loss – less than 0.5 Watts per kvar, including discharge resistors.
Environmentally safe – The dry type construction eliminates flammable
impregnants and does not cause leakage or pollution problems.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
27
1.11
Product overview
Power factor correction capacitors
Eaton capacitors 300 – standard
The Eaton capacitors 300 cubicle is designed for the automatic power factor correction of industrial
loads. It can be supplied with a reactive sensing relay or arranged to operate from existing
control devices (slave). The equipment is arranged to switch capacitors as the load requirement
varies, thus ensuring that the system power factor is maintained at an economic level.
• Fully automatic control • Easily extendable • Low loss • Self‑healing
• Individually protected elements • Non flammable construction
• Environmentally friendly • Easy maintenance • Front or rear cable access
The cubicle is designed to be compatible with switchboards, its construction, therefore,
is to the same exacting standards required by a switchboard manufacturer.
Hinged doors are fitted as standard which permits easy inspection and maintenance.
The equipment is designed for full front access both for installation and
maintenance. It can, therefore, be fitted where space is at a premium.
The modular body construction as standard, enables the equipment
to be easily extended at a later date if required.
The cubicle incorporates capacitor units
with the following features:
Dry long life low dielectric loss.
Metallised polypropylene windings encapsulated in epoxy
resin and mounted within a sheet steel case.
Fitted with an internal fuse.
Self-healing – internal faults vaporize the metallisation.
Low losses – less than 0.5 W/kvar.
Environmentally friendly, non-toxic and non-flammable.
Complete with discharge resistors.
Cubicle construction
Each Eaton capacitors 300 cubicle can house up to 300 kvar of capacitors
switched in stages of 25 to 100 kvar dependent upon requirements.
The control equipment comprises:
• Set of DIN removable fuses and carriers per 1 or 2 switching stages.
• Suitably rated contactor per switching stage.
• Hand/Off/Auto selector switch per switching stage when required.
• ‘Capacitor Energised’ indication lamp per switching stage when required.
• Set of control fuses.
The cubicle has throughgoing busbars and all internal wiring and
interconnections. Control wiring is clearly labelled.
All switching stages are clearly numbered and the panel is
complete with all necessary information labels.
28
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Product overview
Power factor correction capacitors
1.11
Eaton capacitors 300 – detuned
The Eaton capacitors 300 cubicle is designed for the automatic power factor correction of
industrial loads. It can be supplied with a reactive sensing relay or arranged to operate from
existing control devices. The equipment is arranged to switch capacitors as the load requirement
varies, thus ensuring that the system power factor is maintained at an economic level.
• De-tuned to reduce harmonics • Reduced nuisance tripping of MCCBs
• Fully automatic control • Easily extendable • Low loss • Self‑healing
• Individually protected elements • Non flammable construction
• Environmentally friendly • Easy maintenance • Front or rear cable access
The cubicle is designed to be compatible with switchboards, its construction, therefore,
is to the same exacting standards required by a switchboard manufacturer.
Hinged doors are fitted as standard which permits easy inspection and maintenance.
The equipment is designed for full front access both for installation and
maintenance. It can, therefore, be fitted where space is at a premium.
The modular body construction as standard, enables the equipment
to be easily extended at a later date if required.
The cubicle incorporates capacitor units
with the following features:
Dry long life low dielectric loss.
Metallised polypropylene windings encapsulated in epoxy
resin and mounted within a sheet steel case.
Fitted with an internal fuse.
Self-healing – internal faults vaporize the metallisation.
Low losses – less than 0.5 W/kvar.
Environmentally friendly, non-toxic and non-flammable.
Complete with discharge resistors.
Cubicle construction
Each Eaton capacitors 300 cubicle can house up to 250 kvar of
capacitors switched in stages of 25 to 100 kvar dependent
upon requirements.
The control equipment comprises:
• Set of DIN removable fuses and carriers per switching stage.
• Suitably rated contactor per switching stage.
• Hand/Off/Auto selector switch per switching stage when required.
• ‘Capacitor Energised’ indication lamp per switching stage when required.
• Set of control fuses.
• Natural ventilation is deemed acceptable, however forced ventilation is available on request.
The cubicle has throughgoing busbars and all internal wiring and
interconnections. Control wiring is clearly labelled.
All switching stages are clearly numbered and the panel is
complete with all necessary information labels.
Reactor details:
• Aluminium or Copper windings (on request, dependant on customer specification).
• Low losses.
• Low noise.
• High overloading capacity.
• 7% de-tuning factor as standard, others available on request.
• 189Hz as standard.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
29
1.11
Product overview
Power factor correction capacitors
What are harmonics?
Harmonic distortion in electrical power systems is becoming more and more prevalent.
The ever increasing use of devices having non-linear operating characteristics
means more harmonics are being produced in the power system.
This section looks at the problems this is causing and the solutions
that can be achieved by the use of Eaton capacitors.
Harmonic problems must not be confused with transient disturbances. Harmonics
are continuous, steady state disturbances whereas transient disturbances
are of short duration caused by ‘spikes’, surges, or impulses.
For most electrical engineering applications it is assumed that all
alternating currents and voltages have a sinusoidal waveform.
An alternating waveform that is not sinusoidal is said to be complex. This complex
waveform may be shown to be built up of a series of sinusoidal waveforms whose
frequencies are integral multiples of a frequency of the fundamental, or basic, wave.
The sinusoidal components of a complex wave are called the harmonics.
Thus the second harmonic has a frequency of twice the fundamental, the third three times, etc.
30
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Memshield 3 MCB distribution boards and enclosures
2
Eaton’s Memshield 3 MCB distribution boards have
evolved through an intimate knowledge and feedback
from electrical contractors, consulting engineers
and end users to provide solutions to a wide range
of electrical distribution applications in commercial
buildings. Memshield 3 delivers safe, reliable and
high performance protection of electrical power
distribution systems in accordance with BS EN 61439.
2.1
TYPE A SPN DISTRIBUTION BOARDS
125A SPN, type A distribution boards......................................................................................................................................... 32
Incoming devices ........................................................................................................................................................................ 32
Meterpack assemblies ................................................................................................................................................................ 32
Surge protection devices ............................................................................................................................................................ 32
Outgoing devices, MCBs & RCBOs ........................................................................................................................................... 33
General accessories ................................................................................................................................................................... 34
2.2
TYPE B TPN DISTRIBUTION BOARDS
125A TPN, type B distribution boards ......................................................................................................................................... 35
125A Incomer kits ...................................................................................................................................................................... 35
250A TPN, type B distribution boards ......................................................................................................................................... 35
250A Incomer kits ...................................................................................................................................................................... 36
Meterpack assemblies ................................................................................................................................................................ 36
Split metered power and lighting board ..................................................................................................................................... 36
Surge protection devices ............................................................................................................................................................ 36
Outgoing devices, MCBs & RCBOs ........................................................................................................................................... 37
General accessories ................................................................................................................................................................... 40
2.3
2.4
MODULAR ENCLOSURES
Enclosure accessories ................................................................................................................................................................ 41
MCB PAN ASSEMBLIES............................................................................................................................................................ 42
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
31
2.1
Memshield 3 MCB distribution boards and enclosures
Type A, SPN distribution boards
See page 126 for technical data and overall dimensions
EAM10
125A SPN, type A distribution boards
• When more than 16 SP ways are required, see our TPN board ranges, complete with single phase kit options
• IP3X
EAMS1251N
Description
Rating
(A)
Total no. of
outgoing ways
Eaton list
number
4 way SPN, type A distribution board
7 way SPN, type A distribution board
10 way SPN, type A distribution board
13 way SPN, type A distribution board
16 way SPN, type A distribution board
125
125
125
125
125
4
7
10
13
16
EAM4
EAM7
EAM10
EAM13
EAM16
Incoming devices for SPN, type A distribution boards
• Incoming devices supplied separate to distribution board
EAMMP65
Description
Rating
Poles
(A)
Switch-disconnector
RCCB incoming device for SPN, type A distribution board
RCCB incoming device for SPN, type A distribution board
RCCB incoming device for SPN, type A distribution board
Direct connection kit for SPN, type A distribution board
125
90
90
90
100
Sensitivity
Eaton list
(mA)number
SPSN–
1P+N
30
1P+N
100
1P+N
300
1P+N
–
EAMS1251N
EAMS100HE
EAMS100ME
EAMS100LE
EAMBT1002
Metered SPN, type A distribution boards & standard meter packs
• Type A SPN boards, fitted with multifunction meters, can display; Amps, kW, kWh, kVar
and kVarh pulsed output etc.
• Split load versions utilise a two channel meter, feeding two independent busbars and groups of MCB/RCBOs
• Split load versions provide independent monitoring of “Power” and “Lighting” loads and total load.
• Aids compliance with Part L2 of the building regulations (England & Wales and Section 6 Scotland)
•IP3X
Description
Rating
(A)
Total no. of
outgoing ways
Installed meter,
Eaton list
characteristics3)number
Meterpack for SPN, type A distribution boards
9 way SPN, type A distribution board1)
9 way SPN, type A distribution board1)
12 way SPN, type A distribution board1)
12 way SPN, type A distribution board1)
Split metered SPN, type A distribution board1), 2)
Split metered SPN, type A distribution board1), 2)
Split metered SPN, type A distribution board1), 2)
Split metered SPN, type A distribution board1), 2)
65
–
Pulsed output, kWh EAMMP65
65
9
Pulsed output, kWh EAM9M
659 Modbus
EAM9MB
65
12
Pulsed output, kWh EAM12M
6512Modbus
EAM12MB
100
9 + 3
Pulsed output, kWh EAMSL93M
100
9 + 3
Modbus
EAMSL93MB
100
6 + 6
Pulsed output, kWh EAMSL66M
100
6 + 6
Modbus
EAMSL66MB
Includes factory fitted switch disconnector and single channel meter
Includes two channel meter, 65A max load per channel
3) Output type is Pulsed or Modbus
1)
2)
EM3SSK1T2
Surge protection device for SPN, type A distribution boards
• See page 126 for technical data
Description
Eaton list
number
Enclosed surge protection kit for SPN boards – type 2
32
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EM3SSK1T2
2.1
Memshield 3 MCB distribution boards and enclosures
Type A, SPN distribution boards
EMDH104
Outgoing devices, MCBs – 10/15kA, single pole
• Trip types B, C and D
• Dual rated, 10kA to IEC 60898 and 15kA to IEC 60947-2
Description
Rated current (A)
Width
(mm)
Short circuit
rating (kA)
Eaton list number
Trip type B
Trip type C
Trip type D
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
1
2
4
6
8
10
13
16
20
25
32
40
50
63
18
18
18
18
18
18
18
18
18
18
18
18
18
18
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
EMBH101
EMBH102
EMBH104
EMBH106
EMBH108
EMBH110
EMBH113
EMBH116
EMBH120
EMBH125
EMBH132
EMBH140
EMBH150
EMBH163
EMCH101
EMCH102
EMCH104
EMCH106
EMCH108
EMCH110
EMCH113
EMCH116
EMCH120
EMCH125
EMCH132
EMCH140
EMCH150
EMCH163
EMDH101
EMDH102
EMDH104
EMDH106
EMDH108
EMDH110
EMDH113
EMDH116
EMDH120
EMDH125
EMDH132
EMDH140
EMDH1501)
EMDH1631)
1)
EMCH116R30C
15kA to IEC60947-2 rating only
Outgoing devices, RCBOs single pole – trip type C – 30mA sensitivity
• Eaton’s range of residual current circuit breakers with integral overload protection (RCBOs), are manufactured to IEC/
EN 61009 and meet the latest European and international standards.
• For other RCBO sensitivity options refer to full details on page 49.
EMBH116R30C
Description
Rating
Trip type
(A)
Sensitivity
Eaton list
(mA)number
Eaton RCBO 6A 10kA type C SP Eaton RCBO 10A 10kA type C SP
Eaton RCBO 16A 10kA type C SP
Eaton RCBO 20A 10kA type C SP
Eaton RCBO 25A 10kA type C SP Eaton RCBO 32A 10kA type C SP Eaton RCBO 40A 6kA type C SP
Eaton RCBO 45A 6kA type C SP
6
10
16
20
25 32
40
45
30
30
30
30
30 30
30
30
C
C
C
C
C
C
C
C
EMCH106R30C
EMCH110R30C
EMCH116R30C
EMCH120R30C
EMCH125R30C
EMCH132R30C
EMCH140R30C
EMCH145R30C
Outgoing devices, RCBOs single pole – trip type B – 30mA sensitivity
Description
Rating
Trip type
(A)
Sensitivity
Eaton list
(mA)number
Eaton RCBO 6A 10kA type B SP Eaton RCBO 10A 10kA type B SP
Eaton RCBO 16A 10kA type B SP
Eaton RCBO 20A 10kA type B SP
Eaton RCBO 32A 10kA type B SP Eaton RCBO 40A 6kA type B SP
Eaton RCBO 45A 6kA type B SP
6
10
16
20
32
40
45
30
30
30
30
30
30
30
B
B
B
B
B
B
B
EMBH106R30C
EMBH110R30C
EMBH116R30C
EMBH120R30C
EMBH132R30C
EMBH140R30C
EMBH145R30C
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
33
2.1
EMDL
Memshield 3 MCB distribution boards and enclosures
Type A, SPN distribution boards
General accessories for SPN, type A distribution boards
Description
Eaton list
number
EMPL
MCB blanking module – 18mm
Half MCB blanking strip – 9mm
Universal device lockout attachment – fits MCBs, RCCBs and RCBOs
Padlock suitable for ASPDL
Door barrel lock with 2 keys
Door padlocking kit
Padlock suitable for EMPL
Vertical coupling kit for connecting 2 SPN Distribution boards (125A max. total load)1)
Clean earth for A board 5 terminals
Clean earth for A board 11 terminals
1)
34
Incominging device required for each linked distribution boards
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EMBP
EMABP
ASPDL
PD2
EMDL
EMPL
PD1
EAMCK
EAME5
EAME11
2.2
Memshield 3 MCB distribution boards and enclosures
Type B, TPN distribution boards
See page 126 for technical data and overall dimensions
EBM81
125A/250A TPN, type B distribution boards
• IP4X
Description
Rating
(A)
4 way TPN, type B distribution board
6 way TPN, type B distribution board
8 way TPN, type B distribution board
12 way TPN, type B distribution board
16 way TPN, type B distribution board 12 way TPN, type B distribution board
18 way TPN, type B distribution board
24 way TPN, type B distribution board
125
4
125
6
125
8
125
12
125 16
125/2251)12
125/2501)18
125/2501)24
1)
EBM121D
Total no. of
outgoing ways
Eaton list
number
EBM41
EBM61
EBM81
EBM121
EBM161
EBM122
EBM182
EBM242
225A/250A options – if used with cable extension box or with cable trunking. See 250A incomer options below
125A SPSN, type B distribution board • SPSN main switch disconnector fitted
•IP4X
EBMS1253
Description
Rating
(A)
Total no. of
outgoing ways
Eaton list
number
12 way SPSN type B distribution board 125 12
EBM121D
Description
Rating
(A)
Pole
Eaton list
configurationnumber
Switch disconnector
Switch disconnector kit (including single phasing link)
Switch disconnector
Direct connection (lugs connector)
30mA RCCB1)
100mA RCCB1)
300mA RCCB1)
300mA RCCB with time delay
Switch disconnector feeding 125A TP AC1 contactor, housed in extension box
125
TP
EBMS1253
125
SPSN
EBMS1251N
125
TPSN
EBMS1253N
125/250
TP
EBMBT2503
100TPSN
EBMR30
100TPSN
EBMR100
100TPSN
EBMR300
100
TPSN
EBMR300T
125
TP
EBMCC1253
125A incomer options for type B distribution boards
• Incoming devices supplied separate to distribution board.
1)
EBM62H
Includes 50mm2 terminal adapter
250A TPN, type B high load distribution board
• These boards include 2 TPN outgoing ways for 27mm MCB (upto 125A)
• Adequate integral cabling space means that no extension box is required.
• IP4X
• Fitted with door lock as standard.
Description
Rating
(A)
Total no. of 18mm
TP outgoing ways
(63A max)
Total no. of 27mm
Total no. of
TP outgoing ways outgoing ways
(125A max)
Eaton list
number
2 way TPN, type B distribution board
6 way TPN, type B distribution board
8 way TPN, type B distribution board
12 way TPN, type B distribution board
18 way TPN, type B distribution board
24 way TPN, type B distribution board
0
4
6
10
16
22
2
2
2
2
2
2
EBM22H
EBM62H
EBM82H
EBM122H
EBM182H
EBM242H
200
250
250
250
250
250
2
6
8
12
18
24
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
35
2.2
EBMMB250
Memshield 3 MCB distribution boards and enclosures
Type B, TPN distribution boards
250A incomer options for type B distribution boards
• Incoming devices supplied separate to distribution board.
• Where used with EBM122 or EBM242, a separate cable extension box or suitable cable trunking is required
Description
Rating
(A)
Pole
Eaton list
configurationnumber
Switch-disconnector
250TP
Direct connection (lugs connector)
250
TP
MCCB incomer kit (includes MCCB)
250
TP
MCCB incomer kit (includes MCCB)
200
TP
MCCB incomer kit (includes MCCB)
160
TP
Switch disconnector feeding 250A TP AC1 contactor, housed in extension box
250
TP
Single phase conversion kit for 250A rated board only (requires EBMS2503 to be ordered seperately)
EBMMPCT250
EBMSL642MB
EBMS2503
EBMBT2503
EBMMB250
EBMMB200
EBMMB160
EBMCC2503
EBMS25
Meterpack assemblies – TPN, type B distribution boards Description
Rating (A)
(total load)
Installed meter, characteristics
Eaton list
number
Meterpack for TPN, type B distribution boards
Meterpack for TPN, type B distribution boards
Meterpack for TPN, type B distribution boards
Double meterpack for 2 x TPN, type B distribution boards
Double meterpack for 2 x TPN, type B distribution boards
Double meterpack for 2 x TPN, type B distribution boards
Double meterpack for 2 x TPN, type B distribution boards
Meterpack for TPN, type B distribution boards
250
250
250
250
250
125
125
120
Pulsed output, kWh
Modbus + pulsed output, kWh
MID certified meter
Pulsed output, kWh
Modbus + pulsed output, kWh
Pulsed output, kWh
Modbus + pulsed output, kWh
MID certified meter
EBMMPCT250
EBMMPCT250M
EBMMPCT250MID
EBMMPSL250
EBMMPSL250M
EBMMPSL125
EBMMPSL125M
EBMMPDC120
Split metered power and lighting board – 200A TPN, type B
• Includes factory fitted 200A switch disconnector and two channel meter
• Adequate integral cabling space means that no extension box is required.
•IP4X
• Meter has both pulsed and Modbus outputs as standard.
• Fitted with door lock as standard.
• Single phasing kit included to be used if required
EM3SSK3T12
Description
Rating
(A)
Total no. of outgoing ways
Installed meter, characteristics
Eaton list
number
Split metered TPN, type B distribution board Split metered TPN, type B distribution board Split metered TPN, type B distribution board Split metered TPN, type B distribution board
200
200
200
200
6+4
8+6
10+8
14+10
Modbus + pulsed output, kWh
Modbus + pulsed output, kWh
Modbus + pulsed output, kWh
Modbus + pulsed output, kWh
EBMSL642MPMB
EBMSL862MPMB
EBMSL1082MPMB
EBMSL14102MPMB
Surge protection device for type B distribution boards
• See page 126 for technical data
Description
Eaton list
number
Enclosed surge protection kit for TPN boards – type 1&2
Enclosed surge protection kit for TPN boards – type 2
36
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EM3SSK3T12
EM3SSK3T2
2.2
Memshield 3 MCB distribution boards and enclosures
Type B, TPN distribution boards
EMDH104
Outgoing devices – MCBs – 10/15kA, single pole
• Trip types B, C and D
• Dual rated, 10kA to IEC 60898 and 15kA to IEC 60947-2
Description
Rated
current (A)
Width
(mm)
Short circuit
rating (kA)
Eaton list number
Trip type B
Trip type C
Trip type D
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
1
2
4
6
8
10
13
16
20
25
32
40
50
63
18
18
18
18
18
18
18
18
18
18
18
18
18
18
10 /15
10 /15
10 /15
10 /15
10 /15
10 /15
10 /15
10 /15
10 /15
10 /15
10 /15
10 /15
10 /15
10 /15
EMBH101
EMBH102
EMBH104
EMBH106
EMBH108
EMBH110
EMBH113
EMBH116
EMBH120
EMBH125
EMBH132
EMBH140
EMBH150
EMBH163
EMCH101
EMCH102
EMCH104
EMCH106
EMCH108
EMCH110
EMCH113
EMCH116
EMCH120
EMCH125
EMCH132
EMCH140
EMCH150
EMCH163
EMDH101
EMDH102
EMDH104
EMDH106
EMDH108
EMDH110
EMDH113
EMDH116
EMDH120
EMDH125
EMDH132
EMDH140
EMDH1501)
EMDH1631)
1)
EMCH310
15kA to IEC60947-2 rating only
Outgoing devices – MCBs – 10/15kA, three pole
• Trip types B, C and D
• Dual rated, 10kA to IEC 60898 and 15kA to IEC 60947-2
Description
Rated
current (A)
Width
(mm)
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
1
2
4
6
8
10
13
16
20
25
32
40
50
63
5410/15
EMBH301
54
10/15
EMBH302
54
10/15
EMBH304
54
10/15
EMBH306
54
10/15
EMBH308
54
10/15
EMBH310
54
10/15
EMBH313
54
10/15
EMBH316
54
10/15
EMBH320
54
10/15
EMBH325
54
10/15
EMBH332
54
10/15
EMBH340
54
10/15
EMBH350
54
10/15
EMBH363
1)
EMCS1100
Short circuit
rating (kA)
Eaton list number
Trip type B
Trip type C
Trip type D
EMCH301
EMCH302
EMCH304
EMCH306
EMCH308
EMCH310
EMCH313
EMCH316
EMCH320
EMCH325
EMCH332
EMCH340
EMCH350
EMCH363
EMDH301
EMDH302
EMDH304
EMDH306
EMDH308
EMDH310
EMDH313
EMDH316
EMDH320
EMDH325
EMDH332
EMDH340
EMDH3501)
EMDH3631)
15kA to IEC60947-2 rating only
Outgoing devices (for 250A high load distribution board only) – MCBs, single pole
Rated current
In (A)
Width
(mm)
Short circuit rating Eaton list number
(IEC/EN 60947-2)
Trip type B
Trip type C
20 32 40 50 63 80
100
125
27 25kA EMBS120 27 25kA EMBS132 27 25kA EMBS140 27 25kA EMBS150 27 25kA EMBS163 2720kA
EMBS180
2720kA
EMBS1100
2715kA
EMBS1125
EMCS120 EMCS132 EMCS140 EMCS150 EMCS163 EMCS180
EMCS1100
EMCS1125
Trip type D
EMDS120
EMDS132
EMDS140
EMDS150
EMDS163
EMDS180
EMDS1100
–
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
37
2.2
EMCS3125
EMCH116R30C
Memshield 3 MCB distribution boards and enclosures
Type B, TPN distribution boards
Outgoing devices (for 250A high load distribution board only) – MCBs, three pole
Rated current
In (A)
Width
(mm)
Short circuit rating Eaton list number
(IEC/EN 60947-2)
Trip type B
Trip type C
20 32 40 50 63 80
100
125
81 25kA EMBS320 81
25kA EMBS332 81 25kA EMBS340 81 25kA EMBS350 81 25kA EMBS363 8120kA
EMBS380
8120kA
EMBS3100
8115kA
EMBS3125
EMCS320 EMCS332 EMCS340 EMCS350 EMCS363 EMCS380
EMCS3100
EMCS3125
Trip type D
EMDS320
EMDS332
EMDS340
EMDS350
EMDS363
EMDS380
EMDS3100
–
Outgoing devices, RCBOs single pole – trip type C – 30mA sensitivity
• Eaton’s range of residual current circuit breakers with integral overload protection (RCBOs), are manufactured to IEC/
EN 61009 and meet the latest European and international standards.
• For other RCBO sensitivity options refer to full details on page 49.
EMBH116R30C
38
Description
Rating
Trip type
(A)
Sensitivity
Eaton list
(mA)number
Eaton RCBO 6A 10kA type C SP Eaton RCBO 10A 10kA type C SP
Eaton RCBO 16A 10kA type C SP
Eaton RCBO 20A 10kA type C SP
Eaton RCBO 25A 10kA type C SP Eaton RCBO 32A 10kA type C SP Eaton RCBO 40A 6kA type C SP
Eaton RCBO 45A 6kA type C SP
6
10
16
20
25 32
40
45
30
EMCH106R30C
30
EMCH110R30C
30
EMCH116R30C
30
EMCH120R30C
30 EMCH125R30C
30
EMCH132R30C
30
EMCH140R30C
30EMCH145R30C
C
C
C
C
C
C
C
C
Outgoing devices, RCBOs single pole – trip type B – 30mA sensitivity
Description
Rating
Trip type
(A)
Sensitivity
Eaton list
(mA)number
Eaton RCBO 6A 10kA type B SP Eaton RCBO 10A 10kA type B SP
Eaton RCBO 16A 10kA type B SP
Eaton RCBO 20A 10kA type B SP
Eaton RCBO 32A 10kA type B SP Eaton RCBO 40A 10kA type B SP
Eaton RCBO 45A 6kA type B SP
6
10
16
20
32
40
45
30
EMBH106R30C
30
EMBH110R30C
30
EMBH116R30C
30
EMBH120R30C
30
EMBH132R30C
30
EMBH140R30C
30EMBH145R30C
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
B
B
B
B
B
B
B
2.2
Memshield 3 MCB distribution boards and enclosures
Type B, TPN distribution boards
169639
Outgoing devices, 10kA 3P +N RCBOs
• Conditionally surge current-proof 250A.
• Sensitivity type A, providing protection against AC and pulsating DC earth fault currents.
• Trip types B, C, and D
• Trip sensitivity 30mA, 100mA or 300mA
Description Characteristic B
Rating (A) Sensitivity Type designation (mA) Eaton list
number
3P+N RCBO 10A 10kA trip B 3P+N RCBO 13A 10kA trip B 3P+N RCBO 16A 10kA trip B 3P+N RCBO 20A 10kA trip B 3P+N RCBO 10A 10kA trip B 3P+N RCBO 13A 10kA trip B 3P+N RCBO 16A 10kA trip B 3P+N RCBO 20A 10kA trip B 3P+N RCBO 10A 10kA trip B 3P+N RCBO 13A 10kA trip B 3P+N RCBO 16A 10kA trip B 3P+N RCBO 20A 10kA trip B 10 13 16 20 10 13 16 20 10 13 16 20 30 30 30 30
100 100 100 100 300 300
300 300 169636
169637
169638
169639
169670
169671
169584
169585
169598
169599
169600
169601
Description Characteristic C
Rating (A) Sensitivity Type designation (mA) Eaton list
number
3P+N RCBO 6A 10kA trip C 3P+N RCBO 10A 10kA trip C 3P+N RCBO 13A 10kA trip C 3P+N RCBO 16A 10kA trip C 3P+N RCBO20A 10kA trip C 3P+N RCBO 25A 10kA trip C 3P+N RCBO 32A 10kA trip C 3P+N RCBO 6A 10kA trip C 3P+N RCBO 10A 10kA trip C 3P+N RCBO 13A 10kA trip C 3P+N RCBO 16A 10kA trip C 3P+N RCBO 20A 10kA trip C 3P+N RCBO 25A 10kA trip C 3P+N RCBO 32A 10kA trip C 3P+N RCBO 6A 10kA trip C 3P+N RCBO 10A 10kA trip C 3P+N RCBO 13A 10kA trip C 3P+N RCBO 16A 10kA trip C 3P+N RCBO 20A 10kA trip C
3P+N RCBO 25A 10kA trip C 3P+N RCBO 32A 10kA trip C 6
10 13 16 20 25 32 6
10 13 16 20 25 32 6
10 13 16 20 25 32 30 30 30 30 30 30 30 100 100 100 100 100 100 100 300 300 300 300 300 300 300 169640
169641
169642
169643
169644
169645
169646
169586
169587
169588
169589
169590
169591
169592
169602
169603
169604
169605
169606
169607
169608
Description Characteristic D
Rating (A) Sensitivity Type designation (mA) Eaton list
number
3P+N RCBO 6A 10kA trip D 3P+N RCBO 10A 10kA trip D 3P+N RCBO 13A 10kA trip D 3P+N RCBO 16A 10kA trip D 3P+N RCBO 20A 10kA trip D 3P+N RCBO 25A 10kA trip D 3P+N RCBO 6A 10kA trip D 3P+N RCBO 10A 10kA trip D 3P+N RCBO 13A 10kA trip D 3P+N RCBO 16A 10kA trip D 3P+N RCBO 20A 10kA trip D 3P+N RCBO 25A 10kA trip D 3P+N RCBO 6A 10kA trip D 3P+N RCBO 10A 10kA trip D 3P+N RCBO 13A 10kA trip D 3P+N RCBO 16A 10kA trip D 3P+N RCBO 20A 10kA trip D 3P+N RCBO 25A 10kA trip D 6
10 13 16 20 25 6
10 13 16 20 25 6
10 13 16 20 25 30 30 30 30 30 30 100 100 100 100 100 100 300 300 300 300 300 300 169647
169648
169649
169650
169651
169652
169593
169594
169618
169619
169620
169621
169609
169610
169611
169612
169613
169614
mRBM4-10/3/B/003-A-UK-PT
mRBM4-13/3/B/003-A-UK-PT mRBM4-16/3/B/003-A-UK-PT mRBM4-20/3/B/003-A-UK-PT mRBM4-10/3/B/01-A-UK-PT mRBM4-13/3/B/01-A-UK-PT mRBM4-16/3/B/01-A-UK-PT mRBM4-20/3/B/01-A-UK-PT mRBM4-10/3/B/03-A-UK-PT mRBM4-13/3/B/03-A-UK-PT mRBM4-16/3/B/03-A-UK-PT mRBM4-20/3/B/03-A-UK-PT mRBM4-6/3/C/003-A-UK-PT mRBM4-10/3/C/003-A-UK-PT mRBM4-13/3/C/003-A-UK-PT mRBM4-16/3/C/003-A-UK-PT mRBM4-20/3/C/003-A-UK-PT mRBM4-25/3/C/003-A-UK-PT mRBM4-32/3/C/003-A-UK-PT mRBM4-6/3/C/01-A-UK-PT mRBM4-10/3/C/01-A-UK-PT mRBM4-13/3/C/01-A-UK-PT mRBM4-16/3/C/01-A-UK-PT mRBM4-20/3/C/01-A-UK-PT mRBM4-25/3/C/01-A-UK-PT mRBM4-32/3/C/01-A-UK-PT mRBM4-6/3/C/03-A-UK-PT mRBM4-10/3/C/03-A-UK-PT mRBM4-13/3/C/03-A-UK-PT mRBM4-16/3/C/03-A-UK-PT mRBM4-20/3/C/03-A-UK-PT mRBM4-25/3/C/03-A-UK-PT mRBM4-32/3/C/03-A-UK-PT mRBM4-6/3/D/003-A-UK-PT mRBM4-10/3/D/003-A-UK-PT mRBM4-13/3/D/003-A-UK-PT mRBM4-16/3/D/003-A-UK-PT mRBM4-20/3/D/003-A-UK-PT mRBM4-25/3/D/003-A-UK-PT mRBM4-6/3/D/01-A-UK-PT mRBM4-10/3/D/01-A-UK-PT mRBM4-13/3/D/01-A-UK-PT mRBM4-16/3/D/01-A-UK-PT mRBM4-20/3/D/01-A-UK-PT mRBM4-25/3/D/01-A-UK-PT mRBM4-6/3/D/03-A-UK-PT mRBM4-10/3/D/03-A-UK-PT mRBM4-13/3/D/03-A-UK-PT mRBM4-16/3/D/03-A-UK-PT mRBM4-20/3/D/03-A-UK-PT mRBM4-25/3/D/03-A-UK-PT POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
39
2.2
EMBP
Memshield 3 MCB distribution boards and enclosures
Type B, TPN distribution boards
General accessories, type B
Description
Eaton list
number
EBMTK
EBMXPC1
EBMNE8
40
EMBP
EMABP
EMBPH
ASPDL
ASPDL27
131669
158056
158053
PD2
EMDL
EMPL
PD1
EBMGP4
EMGP142
EBMTK
EBLB1
EBLB2
EBMMBKIT
MCB blanking module – 18mm
Half MCB blanking strip – 9mm
MCB blanking module – 27mm
Universal device lockout attachment – fits MCBs, RCCBs and RCBOs
Lockout attachment for 27mm MCBs
Lockout attachment for 250A switch/MCCB
Shunt trip 230-240V AC for 250A switch/MCCB
Undervoltage release 230–240V AC for 250A switch/MCCB
Padlock suitable for ASPDL & ASPDL27
Door barrel lock with 2 keys
Door padlocking kit
Padlock suitable for EMPL
Top/bottom gland plate
IP42 gland plate kit
Cable trunking interface kit
Spare way label 12 way – pack of 5
Spare way label 18 way – pack of 5
Enclosure for NZM1 3-pole MCCB incomer
Cable extension boxes, type B
Description
Box
Eaton list
heightnumber
Cable spreader extension box
Cable spreader extension box
180mm 250mm EBMXPC1
EBMXPC2
High integrity/clean earth kit
Description
No. of
Eaton list
waysnumber
High integrity/clean earth kit for type B Board
Note: Up to 4 high integrity earth bars can be fitted to a type B distribution board
8
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EBMNE8
2.3
Memshield 3 MCB distribution boards and enclosures
Type B, TPN distribution boards
EBMXDC9
Modular enclosures
• Modular enclosures will accept MCBs, RCCBs, RCBOs, fuse modules and command control products.
• Modular enclosures EBMXDC6 to EBMXDC45 are fitted with earth and neutral bars as standard.
• Modular enclosures EBMXDC15 and EBMXDCG15 have same profile width suitable for mounting
onto type A, SPN distribution board EAM13 or any type B, TPN distribution board.
See page 127 for technical data and overall dimensions.
EBMXE15
Description
Capactiy in
Glazed door
18mm modules
Eaton list
number
Modular enclosure, 15 module din rail – glazed door Modular enclosure, 6 module din rail – unglazed door
Modular enclosure, 9 module din rail – unglazed door Modular enclosure, 15 module din rail – unglazed door Modular enclosure, 18 module din rail – unglazed door Modular enclosure, 2 x 15 module din rail – unglazed door Modular enclosure, 3 x 15 module din rail – unglazed door Half MCB blanking strip – 9mm
15 Yes EBMXDCG15
6
No EBMXDC6
9
No EBMXDC9
15 No EBMXDC15
18 No EBMXDC18
30 No
EBMXDC30
45 No EBMXDC45
––EMABP
Enclosure accessories
Description
Eaton list
number
EBMXE15
EMDL
EMPL
PD1
Additional earth bar (15 additional holes) Door barrel lock with 2 keys Door padlocking kit Padlock suitable for EMPL Distribution boards type A and type B – cable capacities
Cable capacities
Type A
125A switch disconnector
100A RCCB (type A = 90A)
250A switch disconnector
160A–250A MCCB incomer
100A direct connection kit
250A direct connection lugs
125A contactor incomer
250A contactor incomer
Enclosure earth stud
Incoming earth terminal
Incomming neutral terminal
Outgoing earth terminal
Outgoing neutral terminal
50mm250mm2
35mm250mm2
–
120mm2 (+ M8 lugs)
–
250A = 120mm2 (+ M8 lugs)
35mm2–
–
120mm2 (+ M8 lugs)
–
50mm2
–
120mm2 (+ M8 lugs)
M6
M8
25mm2
125A = 25mm2, 250A = 70mm2
90/100A = 35mm2, 125A = 50mm2
125A = 50mm2, 250A = 120mm2 (+ M8 lugs)
25mm225mm2
25mm225mm2
Type B
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
41
2.4
MCB pan assemblies
Interiors & incoming devices for single phase and three phase
Technical characteristics
Eaton MCB pan assemblies offer a high degree of flexibility for
custom applications. SPN types are available with 4, 7, 10, 13, and
16 ways. TPN types are available with 4, 6, 8, 12,18 and 24 ways.
• Eaton MCB pan assemblies are suitable for
inclusion in other factory built assemblies and as
replacements for distribution board interiors.
• MCB pan assemblies feature fully shrouded busbars.
See pages 129 -130 for the technical details of Eaton MCB pan assemblies.
EAMP10
EAMS1251N
125A SPN type A pan assemblies with earth & neutral bars
Description Rating
(A)
Total no. of outgoing ways
Eaton list
number
4 way SPN, type A pan assembly
7 way SPN, type A pan assembly
10 way SPN, type A pan assembly
13 way SPN, type A pan assembly
16 way SPN, type A pan assembly
125
125
125
125
125
4
7
10
13
16
EAMP4
EAMP7
EAMP10
EAMP13
EAMP16
Incoming devices for SPN, type A pan assemblies
• Incoming devices supplied separate to pan assembly
EBMP61
EBMS1253
Description
Rating
Poles
(A)
Sensitivity
Eaton list
(mA)number
Switch-disconnector
RCCB RCCB
RCCB
Direct connection kit
125 100
100
100
100 SPSN 1P+N 1P+N 1P+N 1P+N –
30
100
300 –
EAMS1251N
EAMS100HE
EAMS100ME
EAMS100LE
EAMBT1002
Description Rating
(A)
Total no. of outgoing ways
Eaton list
number
4 way TPN, type B pan assembly
6 way TPN, type B pan assembly
8 way TPN, type B pan assembly
12 way TPN, type B pan assembly
12 way TPN, type B pan assembly
18 way TPN, type B pan assembly
24 way TPN, type B pan assembly
125
125
125
125
225
250 250
4
6
8
12
12
18
24
EBMP41
EBMP61
EBMP81
EBMP121
EBMP122
EBMP182
EBMP242
Description Rating (A) Pole
configuration
Eaton list
number
Switch disconnector
Switch disconnector kit (including single phasing link)
Switch disconnector
Direct connection (lugs connector)
30mA RCCB
100mA RCCB
300mA RCCB
300mA RCCB with time delay
125
125
125
250
100
100
100
100
TP
SPSN
TPSN
TP
TPSN
TPSN
TPSN
TPSN
EBMS1253
EBMS1251N
EBMS1253N
EBMBT2503
EBMR30
EBMR100
EBMR300
EBMR300T
125A/250A TPN type B pan assemblies with earth & neutral bars
125A incomer options for type B pan assemblies
• Incoming devices supplied separate to pan assembly
42
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
2.4
MCB pan assemblies
EBMMB250
250A incomer options for type B pan assemblies
• Incoming devices supplied separate to pan assembly
Description Rating (A) Pole
configuration
Switch-disconnector
250TP
Direct connection (lugs connector)
250
TP
MCCB incomer kit (includes mCCB)
250
TP
MCCB incomer kit (includes MCCB)
200
TP
MCCB incomer kit (includes mCCB)
160
TP
Single phase conversion kit for 250A rated board only (requires EBMS2503 to be ordered separately)
Eaton list
number
EBMS2503
EBMBT2503
EBMMB250
EBMMB200
EBMMB160
EBMS25
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
43
44
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Distribution board switch and protection devices
3
Eaton provides a comprehensive range of modular
solutions for circuit protection and control. Eaton’s
10/15kA MCBs are high performance current limiting
devices with the ability to disconnect overloads and
short circuits. They are available with trip types
B, C and D with many features of benefit to all
customers. RCBOs with overload protection combine
protection for people and circuits in a single module
width device where space is at a premium.
Double pole and four pole RCCBs are available
in a range of current ratings and four trip
sensitivities, 10, 30, 100 and 300mA.
3.1
3.2
3.3
3.4
MINIATURE CIRCUIT BREAKERS (MCBs) ............................................................................................................................... 46
RESIDUAL CURRENT CIRCUIT BREAKERS (RCCBs) .............................................................................................................. 48
RESIDUAL CURRENT CIRCUIT BREAKER WITH OVERCURRENT PROTECTION (RCBOs) .................................................. 49
ACCESSORIES .......................................................................................................................................................................... 51
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
45
3.1
Distribution board switch and protection devices
Miniature circuit breakers, MCBs , 18mm, 1A-63A
MCBs are available in current ratings from 1A–63A, with trip types B, C and D, 10kA to IEC 60898 and 15kA to IEC 60947-2
See page 135 for technical data and overall dimensions
EMDH104
Miniature circuit breakers – dual rated 10/15kA, single pole
Description
Rated
current (A)
Width
(mm)
Short circuit
rating (kA)
Eaton list number
Trip type B
Trip type C
Trip type D
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
1
2
4
6
8
10
13
16
20
25
32
40
50
63
18
18
18
18
18
18
18
18
18
18
18
18
18
18
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
EMBH101
EMBH102
EMBH104
EMBH106
EMBH108
EMBH110
EMBH113
EMBH116
EMBH120
EMBH125
EMBH132
EMBH140
EMBH150
EMBH163
EMCH101
EMCH102
EMCH104
EMCH106
EMCH108
EMCH110
EMCH113
EMCH116
EMCH120
EMCH125
EMCH132
EMCH140
EMCH150
EMCH163
EMDH101
EMDH102
EMDH104
EMDH106
EMDH108
EMDH110
EMDH113
EMDH116
EMDH120
EMDH125
EMDH132
EMDH140
EMDH1501)
EMDH1631)
Trip type D
1)
EMBH125N
Miniature circuit breakers – dual rated 10/15kA, single pole + neutral
Description
Rated
current (A)
Width
(mm)
Short circuit
rating (kA)
Eaton list number
Trip type B
Trip type C
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
1
2
4
6
8
10
13
16
20
25
32
40
50
63
36
36
36
36
36
36
36
36
36
36
36
36
36
36
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
EMBH101N
EMBH102N
EMBH104N
EMBH106N
EMBH108N
EMBH110N
EMBH113N
EMBH116N
EMBH120N
EMBH125N
EMBH132N
EMBH140N
EMBH150N
EMBH163N
EMCH101NEMDH101N
EMCH102N
EMDH102N
EMCH104N
EMDH104N
EMCH106N
EMDH106N
EMCH108N
EMDH108N
EMCH110N
EMDH110N
EMCH113N
EMDH113N
EMCH116N
EMDH116N
EMCH120N
EMDH120N
EMCH125N
EMDH125N
EMCH132N
EMDH132N
EMCH140N
EMDH140N
EMCH150N
EMDH150N1)
EMCH163N
EMDH163N1)
1)
EMCH220
15kA to IEC60947-2 rating only
Miniature circuit breakers – dual rated 10/15kA, double pole
Description
Rated
Width (mm)
current (A)
Short circuit
rating (kA)
Eaton list number
Trip type B
Trip type C
Trip type D
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
1
2
4
6
8
10
13
16
20
25
32
40
50
63
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
EMBH201
EMBH202
EMBH204
EMBH206
EMBH208
EMBH210
EMBH213
EMBH216
EMBH220
EMBH225
EMBH232
EMBH240
EMBH250
EMBH263
EMCH201
EMCH202
EMCH204
EMCH206
EMCH208
EMCH210
EMCH213
EMCH216
EMCH220
EMCH225
EMCH232
EMCH240
EMCH250
EMCH263
EMDH201
EMDH202
EMDH204
EMDH206
EMDH208
EMDH210
EMDH213
EMDH216
EMDH220
EMDH225
EMDH232
EMDH240
EMDH2501)
EMDH2631)
1)
46
15kA to IEC60947-2 rating only
36
36
36
36
36
36
36
36
36
36
36
36
36
36
15kA to IEC60947-2 rating only
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
3.1
Distribution board switch and protection devices
Miniature circuit breakers, MCBs
EMCH363
Miniature circuit breakers – dual rated 10/15kA, three pole
Description
Rated
current (A)
Width
(mm)
Short circuit
rating (kA)
Eaton list number
Trip type B
Trip type C
Trip type D
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
1
2
4
6
8
10
13
16
20
25
32
40
50
63
54
54
54
54
54
54
54
54
54
54
54
54
54
54
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
10/15
EMBH301
EMBH302
EMBH304
EMBH306
EMBH308
EMBH310
EMBH313
EMBH316
EMBH320
EMBH325
EMBH332
EMBH340
EMBH350
EMBH363
EMCH301
EMCH302
EMCH304
EMCH306
EMCH308
EMCH310
EMCH313
EMCH316
EMCH320
EMCH325
EMCH332
EMCH340
EMCH350
EMCH363
EMDH301
EMDH302
EMDH304
EMDH306
EMDH308
EMDH310
EMDH313
EMDH316
EMDH320
EMDH325
EMDH332
EMDH340
EMDH3501)
EMDH3631)
Eaton list number
Trip type B
Trip type C
Trip type D
1)
EMCH410
15kA to IEC60947-2 rating only
Miniature circuit breakers – dual rated 10/15kA, four pole
Description
Rated
current (A)
Width
(mm)
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
1
2
4
6
8
10
13
16
20
25
32
40
50
63
72
10/15
EMBH401
72
10/15
EMBH402
72
10/15
EMBH404
72
10/15
EMBH406
72
10/15
EMBH408
72
10/15
EMBH410
72
10/15
EMBH413
72
10/15
EMBH416
7210/15
EMBH420
72
10/15
EMBH425
72
10/15
EMBH432
72
10/15
EMBH440
72
10/15
EMBH450
72
10/15
EMBH463
1)
Short circuit
rating (kA)
EMCH401
EMDH401
EMCH402
EMDH402
EMCH404
EMDH404
EMCH406
EMDH406
EMCH408
EMDH408
EMCH410
EMDH410
EMCH413
EMDH413
EMCH416
EMDH416
EMCH420
EMDH420
EMCH425
EMDH425
EMCH432
EMDH432
EMCH440
EMDH440
EMCH450
EMDH4501)
EMCH463EMDH4631)
15kA to IEC60947-2 rating only
Miniature circuit breakers, MCBs, 27mm, 20A-­125A
MCBs are available in current ratings from 20A–125A, with trip types B, C and D, 15kA to 25kA to IEC 60947-2
See page 136 for technical data and overall dimensions
Miniature circuit breakers - single pole
Description
Rated
current (A)
Width
(mm)
Short circuit
rating (kA)
Eaton list number
Trip type B
Trip type C
Trip type D
Miniature circuit breaker
20
27
25kA
EMBS120EMCS120EMDS120
Miniature circuit breaker
32
27
25kA
EMBS132EMCS132EMDS132
Miniature circuit breaker
40
27
25kA
EMBS140EMCS140EMDS140
Miniature circuit breaker
50
27
25kA
EMBS150EMCS150EMDS150
Miniature circuit breaker
632725kA
EMBS163EMCS163EMDS163
Miniature circuit breaker
80
27
20kA
EMBS180EMCS180EMDS180
Miniature circuit breaker
100
27
20kA
EMBS1100EMCS1100EMDS1100
Miniature circuit breaker
125
27
15kA
EMBS1125EMCS1125–
Miniature circuit breakers - three pole
Description
Rated
current (A)
Width
(mm)
Short circuit
rating (kA)
Eaton list number
Trip type B
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
Miniature circuit breaker
20
32
40
50
63
80
100
125
81
81
81
81
81
81
81
81
25kA
25kA
25kA
25kA
25kA
20kA
20kA
15kA
EMBS320EMCS320EMDS320
EMBS332EMCS332EMDS332
EMBS340EMCS340EMDS340
EMBS350EMCS350EMDS350
EMBS363EMCS363EMDS363
EMBS380EMCS380EMDS380
EMBS3100EMCS3100EMDS3100
EMBS3125EMCS3125–
Trip type C
Trip type D
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
47
3.2
Distribution board switch and protection devices
Residual current circuit breakers
See page 137 for technical data and overall dimensions
EAM162H
EAM402M
EAM802L
EAM404H
EAM404M
EAM404L
48
RCCBs – 2-pole double module – 10mA–30mA sensitivity
Description
Poles
Rating
Sensitivity
(A)(mA)
Eaton list
number
16A 2-pole RCCB 10mA
16A 2-pole RCCB 30mA
25A 2-pole RCCB 30mA
40A 2-pole RCCB 30mA
63A 2-pole RCCB 30mA
80A 2-pole RCCB 30mA
100A 2-pole RCCB 30mA
16
16
25
40
63
80
100
EAM162V
EAM162H
EAM252H
EAM402H
EAM632H
EAM802H
EAM1002H
2P
2P
2P
2P
2P
2P
2P
10
30
30
30
30
30
30
RCCBs – 2-pole double module – 100mA sensitivity
Description
Poles
Rating
Sensitivity
(A)(mA)
Eaton list
number
25A 2-pole RCCB 100mA
40A 2-pole RCCB 100mA
63A 2-pole RCCB 100mA
80A 2-pole RCCB 100mA
100A 2-pole RCCB 100mA
25
40
63
80
100
EAM252M
EAM402M
EAM632M
EAM802M
EAM1002M
2P
2P
2P
2P
2P
100
100
100
100
100
RCCBs – 2-pole double module – 300mA sensitivity
Description
Poles
Rating
Sensitivity
(A)(mA)
Eaton list
number
25A 2-pole RCCB 300mA
40A 2-pole RCCB 300mA
80A 2-pole RCCB 300mA
100A 2-pole RCCB 300mA
25
40
80
100
EAM252L
EAM402L
EAM802L
EAM1002L
2P
2P
2P
2P
300
300
300
300
RCCBs – 4-pole – 30mA sensitivity
Description
Poles
Rating
Sensitivity
(A)(mA)
Eaton list
number
40A 4-pole RCCB 30mA
63A 4-pole RCCB 30mA
80A 4-pole RCCB 30mA
100A 4-pole RCCB 30mA
40
63
80
100
EAM404H
EAM634H
EAM804H
EAM1004H
4P
4P
4P
4P
30
30
30
30
RCCBs – 4-pole – 100mA sensitivity
Description
Poles
Rating
Sensitivity
(A)(mA)
Eaton list
number
40A 4-pole RCCB 100mA
63A 4-pole RCCB 100mA
80A 4-pole RCCB 100mA
100A 4-pole RCCB 100mA
40
63
80
100
EAM404M
EAM634M
EAM804M
EAM1004M
4P
4P
4P
4P
100
100
100
100
RCCBs – 4-pole – 300mA sensitivity
Description
Poles
Rating
Sensitivity
(A)(mA)
Eaton list
number
40A 4-pole RCCB 300mA
63A 4-pole RCCB 300mA
80A 4-pole RCCB 300mA
100A 4-pole RCCB 300mA
100A 4-pole RCCB 300mA
40
63
80
100
100
EAM404L
EAM634L
EAM804L
EAM1004L
EAM1004LT
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
4P
4P
4P
4P
4P
300
300
300
300
300, trip time delay
3.3
Distribution board switch and protection devices
Residual current circuit breaker with overcurrent protection (RCBOs)
See page 138 for technical data and overall dimensions
EMBH106R10C
EMBH110R30C
EMBH116R100C
EMCH120R10C
EMCH110R30C
EMCH132R100C
RCBOs single pole – trip type B – 10mA sensitivity
Description
Rating
Trip type
(A)
Sensitivity
Eaton list
(mA)number
Eaton RCBO 6A 10kA type B SP Eaton RCBO 10A 10kA type B SP
Eaton RCBO 16A 10kA type B SP
Eaton RCBO 20A 10kA type B SP
Eaton RCBO 32A 10kA type B SP 6
10
16
20
32
10
10
10
10
10
B
B
B
B
B
EMBH106R10C
EMBH110R10C
EMBH116R10C
EMBH120R10C
EMBH132R10C
RCBOs single pole – trip type B – 30mA sensitivity
Description
Rating
Trip type
(A)
Sensitivity
Eaton list
(mA)number
Eaton RCBO 6A 10kA type B SP Eaton RCBO 10A 10kA type B SP
Eaton RCBO 16A 10kA type B SP
Eaton RCBO 20A 10kA type B SP
Eaton RCBO 32A 10kA type B SP Eaton RCBO 40A 6kA type B SP
Eaton RCBO 45A 6kA type B SP
6
10
16
20
32
40
45
30
30
30
30
30
30
30
B
B
B
B
B
B
B
EMBH106R30C
EMBH110R30C
EMBH116R30C
EMBH120R30C
EMBH132R30C
EMBH140R30C
EMBH145R30C
RCBOs single pole – trip type B – 100mA sensitivity
Description
Rating
Trip type
(A)
Sensitivity
Eaton list
(mA)number
Eaton RCBO 6A 10kA type B SP Eaton RCBO 10A 10kA type B SP
Eaton RCBO 16A 10kA type B SP
Eaton RCBO 20A 10kA type B SP
Eaton RCBO 32A 10kA type B SP 6
10
16
20
32
100
100
100
100
100
B
B
B
B
B
EMBH106R100C
EMBH110R100C
EMBH116R100C
EMBH120R100C
EMBH132R100C
RCBOs single pole – trip type C – 10mA sensitivity
Description
Rating
Trip type
(A)
Sensitivity
Eaton list
(mA)number
Eaton RCBO 6A 10kA type C SP Eaton RCBO 10A 10kA type C SP
Eaton RCBO 16A 10kA type C SP
Eaton RCBO 20A 10kA type C SP
Eaton RCBO 32A 10kA type C SP 6
10
16
20
32
10
10
10
10
10
C
C
C
C
C
EMCH106R10C
EMCH110R10C
EMCH116R10C
EMCH120R10C
EMCH132R10C
RCBOs single pole – trip type C – 30mA sensitivity
Description
Rating
Trip type
(A)
Sensitivity
Eaton list
(mA)number
Eaton RCBO 6A 10kA type C SP Eaton RCBO 10A 10kA type C SP
Eaton RCBO 16A 10kA type C SP
Eaton RCBO 20A 10kA type C SP
Eaton RCBO 25A 10kA type C SP Eaton RCBO 32A 10kA type C SP Eaton RCBO 40A 6kA type C SP
Eaton RCBO 45A 6kA type C SP
6
10
16
20
25 32
40
45
30
30
30
30
30 30
30
30
C
C
C
C
C
C
C
C
EMCH106R30C
EMCH110R30C
EMCH116R30C
EMCH120R30C
EMCH125R30C
EMCH132R30C
EMCH140R30C
EMCH145R30C
RCBOs single pole – trip type C – 100mA sensitivity
Description
Rating
Trip type
(A)
Sensitivity
Eaton list
(mA)number
Eaton RCBO 6A 10kA type C SP Eaton RCBO 10A 10kA type C SP
Eaton RCBO 16A 10kA type C SP
Eaton RCBO 20A 10kA type C SP
Eaton RCBO 32A 10kA type C SP 6
10
16
20
32
100
100
100
100
100
C
C
C
C
C
EMCH106R100C
EMCH110R100C
EMCH116R100C
EMCH120R100C
EMCH132R100C
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
49
3.3
169608
Distribution board switch and protection devices
Residual current circuit breaker with overcurrent protection (RCBOs)
RCBOs 3P+N 10kA
• Conditionally surge current-proof 250A.
• Sensitivity type A, providing protection against AC and pulsating DC earth fault currents.
• Trip types B, C, and D
• Trip sensitivity 30mA, 100mA or 300mA
50
Description Characteristic B
Rating (A) Sensitivity Type designation (mA) Eaton list
number
3P+N RCBO 10A 10kA trip B 3P+N RCBO 13A 10kA trip B 3P+N RCBO 16A 10kA trip B 3P+N RCBO 20A 10kA trip B 3P+N RCBO 10A 10kA trip B 3P+N RCBO 13A 10kA trip B 3P+N RCBO 16A 10kA trip B 3P+N RCBO 20A 10kA trip B 3P+N RCBO 10A 10kA trip B 3P+N RCBO 13A 10kA trip B 3P+N RCBO 16A 10kA trip B 3P+N RCBO 20A 10kA trip B 10 13 16 20 10 13 16 20 10 13 16 20 30 30 30 30
100 100 100 100 300 300
300 300 169636
169637
169638
169639
169670
169671
169584
169585
169598
169599
169600
169601
Description Characteristic C
Rating (A) Sensitivity Type designation (mA) Eaton list
number
3P+N RCBO 6A 10kA trip C 3P+N RCBO 10A 10kA trip C 3P+N RCBO 13A 10kA trip C 3P+N RCBO 16A 10kA trip C 3P+N RCBO20A 10kA trip C 3P+N RCBO 25A 10kA trip C 3P+N RCBO 32A 10kA trip C 3P+N RCBO 6A 10kA trip C 3P+N RCBO 10A 10kA trip C 3P+N RCBO 13A 10kA trip C 3P+N RCBO 16A 10kA trip C 3P+N RCBO 20A 10kA trip C 3P+N RCBO 25A 10kA trip C 3P+N RCBO 32A 10kA trip C 3P+N RCBO 6A 10kA trip C 3P+N RCBO 10A 10kA trip C 3P+N RCBO 13A 10kA trip C 3P+N RCBO 16A 10kA trip C 3P+N RCBO 20A 10kA trip C
3P+N RCBO 25A 10kA trip C 3P+N RCBO 32A 10kA trip C 6
10 13 16 20 25 32 6
10 13 16 20 25 32 6
10 13 16 20 25 32 30 30 30 30 30 30 30 100 100 100 100 100 100 100 300 300 300 300 300 300 300 169640
169641
169642
169643
169644
169645
169646
169586
169587
169588
169589
169590
169591
169592
169602
169603
169604
169605
169606
169607
169608
Description Characteristic D
Rating (A) Sensitivity Type designation (mA) Eaton list
number
3P+N RCBO 6A 10kA trip D 3P+N RCBO 10A 10kA trip D 3P+N RCBO 13A 10kA trip D 3P+N RCBO 16A 10kA trip D 3P+N RCBO 20A 10kA trip D 3P+N RCBO 25A 10kA trip D 3P+N RCBO 6A 10kA trip D 3P+N RCBO 10A 10kA trip D 3P+N RCBO 13A 10kA trip D 3P+N RCBO 16A 10kA trip D 3P+N RCBO 20A 10kA trip D 3P+N RCBO 25A 10kA trip D 3P+N RCBO 6A 10kA trip D 3P+N RCBO 10A 10kA trip D 3P+N RCBO 13A 10kA trip D 3P+N RCBO 16A 10kA trip D 3P+N RCBO 20A 10kA trip D 3P+N RCBO 25A 10kA trip D 6
10 13 16 20 25 6
10 13 16 20 25 6
10 13 16 20 25 30 30 30 30 30 30 100 100 100 100 100 100 300 300 300 300 300 300 169647
169648
169649
169650
169651
169652
169593
169594
169618
169619
169620
169621
169609
169610
169611
169612
169613
169614
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
mRBM4-10/3/B/003-A-UK-PT
mRBM4-13/3/B/003-A-UK-PT mRBM4-16/3/B/003-A-UK-PT mRBM4-20/3/B/003-A-UK-PT mRBM4-10/3/B/01-A-UK-PT mRBM4-13/3/B/01-A-UK-PT mRBM4-16/3/B/01-A-UK-PT mRBM4-20/3/B/01-A-UK-PT mRBM4-10/3/B/03-A-UK-PT mRBM4-13/3/B/03-A-UK-PT mRBM4-16/3/B/03-A-UK-PT mRBM4-20/3/B/03-A-UK-PT mRBM4-6/3/C/003-A-UK-PT mRBM4-10/3/C/003-A-UK-PT mRBM4-13/3/C/003-A-UK-PT mRBM4-16/3/C/003-A-UK-PT mRBM4-20/3/C/003-A-UK-PT mRBM4-25/3/C/003-A-UK-PT mRBM4-32/3/C/003-A-UK-PT mRBM4-6/3/C/01-A-UK-PT mRBM4-10/3/C/01-A-UK-PT mRBM4-13/3/C/01-A-UK-PT mRBM4-16/3/C/01-A-UK-PT mRBM4-20/3/C/01-A-UK-PT mRBM4-25/3/C/01-A-UK-PT mRBM4-32/3/C/01-A-UK-PT mRBM4-6/3/C/03-A-UK-PT mRBM4-10/3/C/03-A-UK-PT mRBM4-13/3/C/03-A-UK-PT mRBM4-16/3/C/03-A-UK-PT mRBM4-20/3/C/03-A-UK-PT mRBM4-25/3/C/03-A-UK-PT mRBM4-32/3/C/03-A-UK-PT mRBM4-6/3/D/003-A-UK-PT mRBM4-10/3/D/003-A-UK-PT mRBM4-13/3/D/003-A-UK-PT mRBM4-16/3/D/003-A-UK-PT mRBM4-20/3/D/003-A-UK-PT mRBM4-25/3/D/003-A-UK-PT mRBM4-6/3/D/01-A-UK-PT mRBM4-10/3/D/01-A-UK-PT mRBM4-13/3/D/01-A-UK-PT mRBM4-16/3/D/01-A-UK-PT mRBM4-20/3/D/01-A-UK-PT mRBM4-25/3/D/01-A-UK-PT mRBM4-6/3/D/03-A-UK-PT mRBM4-10/3/D/03-A-UK-PT mRBM4-13/3/D/03-A-UK-PT mRBM4-16/3/D/03-A-UK-PT mRBM4-20/3/D/03-A-UK-PT mRBM4-25/3/D/03-A-UK-PT 3.4
Distribution board switch and protection devices
Accessories – MCBs, RCCBs & RCBOs
ASPDL
Padlocking devices
For MCBs, RCCBs, RCBOs & switch disconnectors
• The wide range of Eaton devices are complimented by a range of padlocking devices.
• For MCBs and RCCBs the device mechanism is trip free which allows it to be padlocked ‘ON’ for security, but in
the event of a fault condition the device will still operate to disconnect the fault. The device will move to the tripped
position when the lock is removed. These devices can also be padlocked in the ‘OFF’ position.
Description
Eaton list
number
ASPDL
ASPDL27
PD2
Universal device lockout attachment – fits MCBs, RCCBs and RCBOs Lockout attachment for 27mm MCBs
Padlock
ASALMSN
Auxiliary and alarm contacts including test function
For 18mm MCB & RCBO
Auxiliary and alarm contact devices can be fitted together on one MCB. Each is incorporated in a 1/2
module (9 mm) casing with terminals protected to IP 20 capable of accepting cable up to 2.5 mm2.
These devices are designed and manufactured to IEC 60947-5-1 and incorporate a changeover switch
providing remote indication of an MCB which has tripped under fault conditions.
Technical characteristics
• This auxiliary switch allows remote indication of the position of the MCB contacts.
• Auxiliary and Alarm contact ratings:
•
AC14
240 Vac 50Hz, 6A.
•
DC14
125 Vdc, 1A.
• The auxiliary contact will not differentiate between an MCB that is “off” or “tripped”.
• The auxiliary contact can be used in conjunction with a remote supply and signal lamps, bells or buzzers.
Description
Quantity
per carton
Eaton list
number
Auxiliary switch incorporating a test function Alarm switch incorporating reset and test function 1
1
ASAUXSN1)
ASALMSN1)
1)
ASSNTSN415
Not suitable for use in distribution boards
Shunt trips
For 18mm MCB & RCBO
Technical characteristics
• Suitable for all Eaton MCBs including those with either auxiliary or alarm contacts.
• A shunt trip and undervoltage release can be fitted together on one MCB.
• Each is incorporated in a 1 module (18 mm) casing with terminals protected to IP 20 capable of accepting
cable up to 2.5 mm2.
• The shunt trip and UVR are simply clipped to the left hand side of an MCB and have terminals at one end to allow
connection to pan assemblies and comb busbar.
• A shunt release provides remote trippping of an MCB with three voltage options for AC & DC applications.
Description dc characteristics ac characteristics Quantity
per carton
Eaton list
number
MCB shunt trip MCB shunt trip 1
1
ASSNTSN1101)
ASSNTSN4151)
48 V–60 Vdc 110 Vdc 48 V–110 Vac 240 Vac 1) Not suitable for use in distribution boards
Other voltages are available.
ASUVRSC230
Under voltage release
For 18mm MCB & RCBO
• Under voltage release (UVR) for remote tripping of an emergency stop loop.
• The UVR is simply clipped to the left hand side of an MCB and have terminals at one end to allow
connection to pan assemblies and comb busbar.
Description
ac characteristics
Quantity
per carton
Eaton list
number
Under voltage release 1
ASUVRSC2301)
1)
240 Vac Not suitable for use in distribution boards
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
51
52
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Modular control and switching devices
4
Eaton’s wide range of modular timers and twilight
switches are suitable for any residential or commercial
application offering automatic lighting control. Contactors
are frequently applied for switching of lamp loads, fans
or pumps in both utility as well as industrial areas.
4.1
MODULAR SWITCHES / TIMERS AND TWILIGHT SWITCHES
Universal declaration type coding................................................................................................................................................. 54
Analogue time switches - 50 Hz mains synchronised................................................................................................................. 55
Analogue time switches - Quartz controlled ............................................................................................................................... 55
Analogue weekly time switches - Quartz controlled .................................................................................................................. 55
Digital weekly time switches, 1 channel ..................................................................................................................................... 56
Digital weekly time switches, 2 channel ..................................................................................................................................... 57
Twilight switches for DIN rail mounting ...................................................................................................................................... 58
Twilight switch for surface mounting .......................................................................................................................................... 59
Antenna for DCF signal reception ............................................................................................................................................... 60
Antenna including power supply for GPS signal reception ......................................................................................................... 60
Programming software kit including memory card ..................................................................................................................... 60
4.2
4.3
CONTACTORS
Contactors, 20A .......................................................................................................................................................................... 61
Contactors, 25A .......................................................................................................................................................................... 61
Contactors, 40A .......................................................................................................................................................................... 61
Contactors, 63A .......................................................................................................................................................................... 62
Day/night contactors ................................................................................................................................................................... 62
Auxiliary contacts ....................................................................................................................................................................... 62
TRANSFORMERS AND EARTH LEAKAGE RELAYS
Transformer 8/12v 1.0A ............................................................................................................................................................... 63
Earth leakage relays and current transformers ........................................................................................................................... 63
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
53
4.1
Modular control and switching devices
Timers and twilight switches
1
Switches and twilight switches Technical characteristics (depending on type)
Timers & Twilight Switches are applied in any residential,
commercial and industrial buildings wherever automatic control
• Modular design.
is required on predefined times and/or depending on daylight
• Analogue and digital timers.
intensity.
• Time adjustment by 50 Hz net, quartz control, DCF1)
Timers & Twilight Switches are applied in any residential,
• or GPS signal
reception 2).
Technical
characteristics
(depending on type)
•Modular
Manual override
design. switching function.
The
Eaton range
of a widewherever
variety ofautomatic
different control
commercial
and comprises
industrial buildings
is required on predefined times and/or depending on daylight
products
which include analogue Timers, digital Timers, Twilight
intensity.
Switches and Staircase Timers.
O and digital
•Analogue
Power reserve
for alltimers.
quartz and DCF or GPS driven switches.
O adjustment
by 50
net, quartz
control, DCF
•Time
Remote
light sensor
forHz
twilight
switching.
2)
1)
O The Eaton range comprises of a wide variety of different
products which include analogue Timers, digital Timers, Twilight
These
Timers
either be
controlled by a 50Hz
Switches
andcan
Staircase
Timers.
net-synchronisation, quartz control and time synchronisation
These Timers can either be controlled by a 50 Hz netsynchronisation,
control
and time synchronisation
using
or
using the DCF quartz
signal or
GPS antenna,which
guaranteesor
100%
the DCF signal or GPS antenna, which guarantees 100% accuracy
accuracy
at all
times.for
Except
for net-synchronised
all units
at all times.
Except
net-synchronised
timers alltimers
units do
have
self
power
reserve
to
secure
the
time
setting
and
program
do have self power reserve to secure the time setting and program
storage in case a power interruption does occur.
storage in case a power interruption does occur.
Dedicated computer software and memory cards are available to
support the programming of our most advanced timers.
Dedicated
software
memory
are available to
Automaticcomputer
summer and
winterand
time,
holidaycards
and random
switching
complete
functionality
our range.
support
theprograms
programming
of ourthe
most
advancedof
timers.
Automatic
summerare
andsupplied
winter time,
holiday
and
random
Twilight Switches
with a
remote
light
sensor, which
can be easily installed on the outside wall where the required
switching
programs complete the functionality of our range.
light intensity threshold can be simply adjusted on the modular
device itself.
or GPS signal reception .
Manual override switching function.
Benefits
O O Power reserve for all quartz and DCF or GPS driven
•switches.
Easily programmable on front of device.
light
sensor
for twilightsoftware
switching.
•Remote
Computer
aided
programming
available.
O • Compact 18 mm design for restricted space opportunities.
Benefits
• Separate IP40 covers are available for direct wall mounting.
O Easily programmable on front of device.
•Computer
High level aided
of accuracy.
programming software available.
O •Compact
Automatic
and winter
time adjustment.
18summer
mm design
for restricted
space opportunities.
O •Separate
Holiday &IP40
Random
program
settings.
covers
are available
for direct wall mounting.
O of reserve
accuracy.
•High
Highlevel
power
up to 10 years.
O O Automatic summer and winter time adjustment.
Notes:
Holiday & Random program settings.
O 1)
O High
powercalculation
reserve upoftosunrise
10 years.
Automatic
and sunset times throughout
Twilight Switches are supplied with a remote light sensor, which
the year, including the possibility of astro times + / -2 hour shift.
Notes:
can be easily installed on the outside wall where the required
1)
2)
2)
device itself.
Automatic
calculation
of sunrise
and sunset
throughout
The
DCF-signal
can only
be received
within times
a 1000
km radius.
the year, including the possibility of astro times + / -2 hour shift.
light intensity threshold can be simply adjusted on the modular
The DCF-signal can only be received within a 1000 km radius.
Universal declaration
declaration type
type coding
coding
Universal
Type coding - analogue switches
Type coding - digital switches
TS
Q
D
1NO
TS
D
W
1CO
-
TS
S
D
1NO
TS
D
W
2CO
-
TS
Q
D
1CO
TS
D
W
1CO
A
TS
S
D
1CO
TS
D
W
1CO
DG
Q
W
1CO
TS
D
W
1CO
MIN
TS
TS
Q/S
D/W
1NO / 1CO
=
=
=
=
Switch
Quartz / 50 Hz net-synchronisation
Day / week programme
Create / change (contact configuration)
Type coding - digital switches and accessories
A
DCF
SR
S
D
1NO
-
TS
A
GPSKIT
SR
S
W
1NO
-
TS
A
MEMKIT
SR
C
D
1CO
-
TS
A
MEM
SR
S
D
1CO
W
Switch
Accessory
DCF-antenna
Antenna for GPS signal reception including
power supply
MEMKIT = Programming software kit
MEM
= iMemory
=
=
=
=
SWITCHCLOCK AND LIGHT SWITCHES
54
Type coding - twilight switches
TS
TS
A
DCF
GPSKIT
4
TS
= Switch
D
= Digital
W
= Week programme
1CO / 2CO = Exchange / 2 x changeover (contact configuration)
A
= Astroclock
DG
= DCF or GPS controlled
MIN
= Compact 18mm design version
SR
=
S/C
=
D/W
=
1NO / 1CO =
W
=
CA081003EN - January 2013
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Twilight switch
With or without sensor
DIN rail mounting / surface mounting
Create / change (contact configuration)
Wide adjustable sensitivity (2 - 50000 lux)
4.1
Modular control and switching devices
Analogue timers
Technical characteristics (dependant of type)
• Supply voltage 230 V / 50 - 60 Hz (50 Hz for just synchronised versions)
• 50 Hz-mains synchronised or Quartz controlled.
• Daily or weekly programme.
• Manual override switching function.
• Compact 18mm design for restricted space opportunities.
See page 60 for accessories
See page 139 for technical data
167391
167389
167390
167388
167392
Analogue time switches - 50 Hz mains synchronised
Standard version
Program
range
Type
Channels
Contact
configuration
Power
reserve
Min. cycling
time
Width
Type
QPC
Eaton list
number
Day CO -
15 min. 167391
50 Hz-net 1
52.5 mm TSSD1CO 1
Analogue time switches - 50 Hz mains synchronised
18 mm compact design
Program
range
Type
Channels
Contact
configuration
Power
reserve
Min. cycling
time
Width
Type
QPC
Eaton list
number
Day NO -
15 min.
167389
50 Hz-net 1
17.5mm TSSD1NO 1
Analogue time switches - Quartz controlled
Standard version
Program
range
Type
Channels
Contact
configuration
Power
reserve
Min. cycling
time
Width
Type
QPC
Eaton list
number
Day CO
200 hrs 15 min. 167390
Quartz 1
52.5 mm TSQD1CO 1
Analogue time switches - Quartz controlled
18 mm compact design
Program
range
Type
Channels
Contact
configuration
Power
reserve
Min. cycling
time
Width
Type
QPC
Eaton list
number
Day NO 3 y rs 15 min. 167388
Quartz 1
17.5 mm TSQD1NO 1
Analogue weekly timer switches - Quartz controlled
Standard version
Program
range
Type
Channels
Contact
configuration
Power
reserve
Min. cycling
time
Width
Type
QPC
Eaton list
number
Week CO 200 hrs 2 hrs 167392
Quartz 1
52.5 mm TSQW1CO POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
1
55
4.1
Modular control and switching devices
Digital timers
Technical characteristics
• Display back light (switchable).
• Operating voltage 230 V / 50 - 60 Hz.
• Compact 18mm design for restricted space.
• 1 or 2 channel.
• Automatic summer and winter adjustment.
• Quartz controlled.
• Holiday programme.
• 3 to 10 year power reserve.
• Zero crossing switching relay for longer life.
• Weekly programme.
• Integrated operating hour counter.
• Manual ON (and depending on type OFF) switching.
• TSDW1CO, TSDW2CO, TSDW1COA, TSDW1CODG:
• Text-oriented user guidance in display.
• Interface for memory.
See page 60 for accessories
See page 141 for technical data
167379
167383
167382
167381
56
Digital weekly time switches, 1 channel
Standard version
Program
range
Type
Channels
Contact
configuration
Power
reserve
Min. cycling
time
Width
Type
QPC
Eaton list
number
Week CO 10 year 1 min. 167379
Quartz 1
56 35.8 mm TSDW1CO 1
Digital weekly time switches, 1 channel
1TE wide version
Program
range
Type
Channels
Contact
configuration
Power
reserve
Min. cycling
time
Width
Type
QPC
Eaton list
number
Week CO 3 year 1 min. 167383
Quartz 1
28 17.5 mm TSDW1COMIN 1
Digital weekly time switches, 1 channel
Version with Antenna connection
Program
range
Type
Channels
Contact
configuration
Power
reserve
Min. cycling
time
Width
Type
QPC
Eaton list
number
Quartz,
Week DCF / GPS CO 10 year 1 sec. 167382
1
84 35.8 mm TSDW1CODG 1
Digital weekly time switches, 1 channel
Astronomical
Program
range
Type
Channels
Contact
configuration
Power
reserve
Min. cycling
time
Width
Type
QPC
Eaton list
number
Week
CO 10 year 1 min. 167381
Quartz with
astronomical 1
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
56 35.8 mm TSDW1COA 1
4.1
Modular control and switching devices
Digital timers
167380
Digital weekly time switches, 2 channels
Standard version
Program
range
Type
Channels
Contact
configuration
Power
reserve
Min. cycling
time
Width
Type
QPC
Eaton list
number
Week 2 x CO 10 year 1 min. 167380
Quartz 2
56 35.8 mm T SDW2CO POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
1
57
4.1
Modular control and switching devices
Twilight switches for DIN rail mounting
Technical characteristics
• Operating voltage 220 - 240 V / 50 - 60 Hz.
• 1 channel.
• Controlled by external light sensor (supplied).
• Built-in time delay included for unwanted switching e.g. due to car lamp influences (adjustable to
type SRSD1COW and SRCD1CO).Manual ON (and depending on type OFF) switching.
• Text-oriented user guidance in display.
• Switching status indication.
• Adjustable light intensity level.
SRCD1CO
• Manual ON and OFF switching.
• Back lit display.
• Automatic summer and winter time adjustment.
• Holiday programme.
• Zero crossing switching relay for longer life.
• Integrated operating hour counter.
• Memory interface.
• Test function.
See page 60 for accessories
See page 143 for the technical data
167375
Twilight switches for DIN rail mounting
18 mm compact design
Adjustable
Contact
Eaton list
Description
Channels sensitivity
configuration Width
Type
QPC
number
Twilight switch with light sensor 167378
1
2 - 100 lux NO 17.5 mm SRSD1NO 1
167375
Twilight switches for DIN rail mounting
Advanced version, 1 channel
Adjustable
Contact
Eaton list
Description
Channels sensitivity
configuration Width
Type
QPC
number
Twilight switch with light sensor 167377
1
2 - 200 lux CO 54 mm SRSD1COW 1
167378
Twilight switches for DIN rail mounting
Combined version
Adjustable
Contact
Eaton list
Program range
Channels
sensitivity
configuration
Width
Type
QPC
number
Week
58
1
2 - 200 lux POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
CO 72 mm SRCD1CO 1
167377
4.1
Modular control and switching devices
Twilight switch for surface mounting
Technical characteristics
• Operating voltage 220 - 230 V / 50 - 60 Hz.
• 1 channel.
• Integrated light sensor.
• Time delay included for unwanted switching,
adjustable (e.g. due to car lamp influences).
• Back or bottom cable entry.
• Adjustable light intensity on the outside.
• Large light level (180 degrees).
• Test button.
• Degree of protection: IP55.
See page 60 for accessories
See page 143 for technical data
167376
Twilight switch for surface mounting
1 channel
Adjustable
Contact
Eaton list
Program range
Channels
sensitivity
configuration
Width
Type
QPC
number
Week 1
2 - 2.000 lux NO 85 mm SRSW1NO POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
1
167376
59
4.1
167384
Modular control and switching devices
Accessories
Antenna for DCF signal reception
• By using DCF reception 100% accuracy is obtained. A DCF antenna is required to be
mounted on an outside wall. The DCF signal reception is only operable when the timer
is connected to the remote DCF antenna and fed by a DCF power supply.
• DCF antenna for digital TSDW1CODG.
Eaton list
DescriptionType
QPC
number
DCF-antenna 1 167385
TSADCF 1
167384
Antenna includes power supply for GPS signal reception
• Antenna includes power supply for TSDW1CODG.
Eaton list
DescriptionType
QPC
number
Antenna for GPS signal reception, includes power supply 167387
TSAGPSKIT 1
167385
Programming software kit
• For SRCD1CO, TSDW1CO, TSDW2CO, TSDW1COA, TSDW1CODG.
Eaton list
DescriptionType
QPC
number
Programming software kit including adaptor cable, software and memory card
TSAMEMKIT 1
167386
Memory cardTSAMEM
1
167387
See pages 139-144 for timers and twilight switches technical data and overall dimensions.
60
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
4.2
Modular control and switching devices
Contactors
• For other coil voltages contact technical support
CR2011230A
See pages 145-146 for contactors technical data and overall dimensions.
Contactors, 20 A – ac coil
When several contactors are mounted it is advisable to fit a blanking module, List number EMBP, every two contactors.
CR2020024
Description
Rating (A)
Coil voltage
(Vac)
Coil voltage
(Vdc)
Width
Contacts
(mm)
Eaton list
number
Contactor
Contactor
Contactor
20
230
–
18
1 NO + 1 NC CR2011230A
20230– 182 NC
CR2002230A
20230– 182 NO
CR2020230A
Contactors, 20 A – ac/dc coil
When several contactors are mounted it is advisable to fit a blanking module, List number EMBP, every two contactors.
CR2540230A
Description
Rating
(A)
Coil voltage
(Vac)
Coil voltage
(Vdc)
Width
Contacts
(mm)
Eaton list
number
Contactor
Contactor
Contactor
20
230
220
18
1 NO + 1 NC CR2011230
20 23022018 2 NCCR2002230
20 23022018 2 NO
CR2020230
Contactors, 25 A – ac coil
When several contactors are mounted it is advisable to fit a blanking module, List number EMBP, every two contactors.
CR2504024
Description
Rating
(A)
Coil voltage
(Vac)
Coil voltage
(Vdc)
Contactor
Contactor
Contactor
Contactor
25
230
–
25230–
25230–
25230–
Width
Contacts
(mm)
Eaton list
number
36
2 NO + 2 NC CR2522230A
363 NO
CR2530230A
364 NC
CR2504230A
364 NO
CR2540230A
Contactors, 25 A – ac/dc coil
When several contactors are mounted it is advisable to fit a blanking module, List number EMBP, every two contactors.
CR4030024
Description
Rating
(A)
Coil voltage
(Vac)
Coil voltage
(Vdc)
Width
Contacts
(mm)
Contactor
Contactor
Contactor
Contactor
25
25
25
25
230
220
36
23022036
23022036
23022036
Eaton list
number
2 NO + 2 NC CR2522230
3 NO
CR2530230
4 NCCR2504230
4 NO
CR2540230
Contactors, 40 A – ac/dc coil
When several contactors are mounted it is advisable to fit a blanking module, List number EMBP, every two contactors.
Description
Rating
(A)
Coil voltage
(Vac)
Coil voltage
(Vdc)
Width
Contacts
(mm)
Contactor
Contactor
Contactor
Contactor
40
40
40
40
23022054
23022054
23022054
23022054
Eaton list
number
2 NCCR4002230
2 NO
CR4020230
3 NO
CR4030230
4 NO
CR4040230
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
61
4.2
CR6320230
Modular control and switching devices
Contactors
Contactors, 63 A – ac/dc coil
When several contactors are mounted it is advisable to fit a blanking module, List number EMBP, every two contactors.
CRM2540230A
Description
Rating
(A)
Coil voltage
(Vac)
Coil voltage
(Vdc)
Width
Contacts
(mm)
Eaton list
number
Contactor
Contactor
63 23022054 2 NO
CR6320230
63 23022054 4 NO
CR6340230
Day/night contactors, 20–25 A – ac coil
When several contactors are mounted it is advisable to fit a blanking module or spacer every two contactors.
Day/night contactors do have a manual override function, which enables the user to bring the contactor in either
a forced “ON” or “OFF” position. The contactor can only be brought into the forced “ON” position when it is
de-energised. When the contactor is energised the operation will return into the normal/automatic position.
CRA611
Description
Rating
(A)
Coil voltage
(Vac)
Width
Contacts
(mm)
Eaton list
number
Contactor
Contactor
20230182 NO
CRM2020230A
25230364 NO
CRM2540230A
Auxiliary contacts
Can be connected at the right-side of the contactor.
DescriptionRating
Width
Contacts
Eaton list
(A)
(mm)number
Auxiliary
6
9
1 NO + 1 NC CRA611
Auxiliary 692 NO
CRA620
62
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
4.3
Modular control and switching devices
Transformers and earth leakage relays
TR-G3/8
Transformers
Eaton list
Description
Volts
Amps
Width (mm)
Module
number
Bell Transformer 2 module
12
0.6
81.0
36
1
TR-G3/8
Earth leakage relays & CTs
50/60Hz. Output contacts (volt-free) rated at 250V ac, 6A.
Power and system LEDs show status of the relay, CT continuity,
level of earth leakage, earth leakage trip. Eaton earth leakage
relays are designed & tested in accordance with IEC61008-1.
Suitable for use with all Eaton MCCBs & MCBs to provide
add-on earth leakage protection functionality. The earth
leakage relay is used with an ELRCT series current transformer
(core balance) and an appropriate MCB/MCCB shunt trip or
undervoltage release. Power supply required 220-240V ac,
PFR-5
See page 147 for dimensional details.
Earth leakage relays – adjustable trip
Description Sensitivity Time delay Width Eaton list
number
Earth leakage relay
PFR-003
Adjustable 30mA,100mA, 300mA, 500mA, 1A, 3A, 5A
Adjustable 0.02, 0.1, 0.3, 0.5, 1, 3, 5s 36mm PFR-5
Earth leakage relays – fixed trip
Description Sensitivity Time delay Width Eaton list
number
Earth leakage relay
Earth leakage relay
PFR-W-20–
PFR-W-105
Fixed 30mA
Fixed 300mA
Instantaneous (0.02s)
Instantaneous (0.02s)
36mm PFR-003
36mm PFR-03
Current transformers (core balance)
• One current transformer required per relay.
Description Inner Eaton list
dimensionnumber
Current Transformer
20mm diameter
30mm diameter
35mm diameter
70mm diameter
105mm diameter
140mm diameter
210mm diameter
PFR-W-20
PFR-W-30
PFR-W-35
PFR-W-70
PFR-W-105
PFR-W-140
PFR-W-210
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
63
64
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Memshield 3 MCCB panelboards and associated devices
5
A complete range of MCCB panelboards and pan
assemblies providing all the options you need from
a straightforward panelboard to a comprehensive
panelboard system. The range now offers a variety of
incoming devices and a greater choice of outgoing ways
to provide more flexibility and choice to the user.
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
INCOMING DEVICE RATINGS UP TO 250A – OUTGOING DEVICE RATINGS UP TO 160A ................................................. 66
INCOMING DEVICE RATINGS UP TO 400A – OUTGOING DEVICE RATINGS UP TO 160A ................................................. 70
INCOMING DEVICE RATINGS UP TO 400A – OUTGOING DEVICE RATINGS UP TO 250A .................................................. 74
INCOMING DEVICE RATINGS UP TO 630A – OUTGOING DEVICE RATINGS UP TO 250A ................................................. 78
INCOMING DEVICE RATINGS UP TO 800A – OUTGOING DEVICE RATINGS UP TO 400A ................................................. 82
PLUG-IN INCOMING METERING ............................................................................................................................................. 86
PLUG-IN OUTGOING METERING ............................................................................................................................................ 88
LIGHTNING & SURGE SUPPRESSION FOR MCCB PANELBOARDS .................................................................................... 90
MCCB PAN ASSEMBLIES ......................................................................................................................................................... 91
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
65
5.1
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 250A – outgoing device ratings up to 160A
Specification
Features
• Panelboards to IEC61439-2. Form 3b Type 2
• 4, 6, 8, or 12 outgoing TP ways
• Busbar system KEMA certified 50kA Icc, Icw 25kA 1s
• Outgoing devices; NZM1 16A–125A SP & 20A–160A TP
• IP3X construction
• Tin–plated busbars
• MCCBs to IEC60947-2. kA ratings shown are Ics=Icu at 400V ac
• Can be configured for incomer device at top of panelboard
• Switch disconnectors to IEC60947-3
• Removable side gland plates as standard
• Wide range of extension boxes, metering, surge
protection, and earth leakage incomer options available
See pages 149-151 for dimensions.
EPBN1425
• Minimum ordering requirement: panelboard + incoming device + incomer
connection kit + outgoing devices + blanking plates
Description
Associated
incoming device
Current rating
No. of ways
(A)
Eaton list
number
Incoming rating up to 250A, outgoing ratings up to 160A
NZM2 MCCB or N2 switch disconnector
250
4
EPBN1425
or direct lugs connection6EPBN1625
8
EPBN1825
12
EPBN11225
NZMC2-A250KCO
MCCB incoming device
• 36kA or 50kA options
• Select appropriate incomer device from table below
• Maximum cable capacity 185mm2
• Adjustable trip. Thermal trip adjustment 0.8 to 1 x In, Magnetic trip adjustment 6 to 10 x In
Poles
Incoming device
Current rating Eaton list number
type
(A)
Short circuit rating
36kA
50kA
3-pole
NZM2 MCCB 160
NZMC2-A160KCONZMN2-A160KCO
200
NZMC2-A200KCONZMN2-A200KCO
250
NZMC2-A250KCONZMN2-A250KCO
4-pole (3 phase and switched neutral)
NZM2 MCCB 160
NZMC2-4-A160KCONZMN2-4-A160KCO
200
NZMC2-4-A200KCONZMN2-4-A200KCO
250
NZMC2-4-A250KCONZMN2-4-A250KCO
N2-250KCO
Switch disconnector (non-automatic) incoming device
• Select appropriate incomer device from table below
• Maximum cable capacity 185mm2
66
Poles
Incoming device
type
Current rating
(A)
Eaton list
number
3-pole
4-pole
N2 Switch disconnector
N2 Switch disconnector
250
250
N2-250KCO
N2-4-250KCO
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
5.1
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 250A – outgoing device ratings up to 160A
EPBKN125L
Incomer connection kit/metering connection kit
• See incoming metering section below to order metering components
Poles
Maximum rating
(A)
Eaton list
number
3-pole incomer connection kit
3-pole incomer connection kit – includes metering CT and CT to meter cable
4-pole incomer connection kit
4-pole incomer connection kit – includes metering CT and CT to meter cable
Direct connection lugs kit
Direct connection lugs kit – includes metering CT and CT to meter cable
Adapter kit for use when incomer device mounted at top of panelboard
250
250
250
250
250
250
230
EPBKN1253
EPBKN1253M
EPBKN1254
EPBKN1254M
EPBKN125L
EPBKN125LM
EPBKTFSN21)
1)
NZMB1-1-AF63
and NZMB1-A160
Maximum rating of panelboard when top fed is 230A
Outgoing devices – NZM1 frame MCCBs
• Maximum cable capacity 70mm2
• Single pole fixed trip. Triple pole thermal trip adjustment 0.8 to 1 x In, magnetic trip adjustment 6 to 10 x In
EPBN1BP1
Rating
(A)
Eaton list number
Single pole 25kA
16
20
32
40
50
63
80
100
125
160
NZMB1-1-AF16–
NZMB1-1-AF20NZMB1-A20
NZMB1-1-AF32NZMB1-A32
NZMB1-1-AF40NZMB1-A40
NZMB1-1-AF50NZMB1-A50
NZMB1-1-AF63NZMB1-A63
NZMB1-1-AF80NZMB1-A80
NZMB1-1-AF100NZMB1-A100
NZMB1-1-AF125NZMB1-A125
–NZMB1-A160
1)
36kA triple pole also available, change ‘B’ to ‘C’ in list number, ie NZMC1-A125
2)
50kA triple pole also available, change ‘B’ to ‘N’ in list number, ie NZMN1-A125
Triple pole 25kA1) 2)
Accessories
Description Eaton list
number
SP blanking module NZM1 frame (i.e. order 3 per TP way)
Panel door lock with 2 keys (have same key code)
Terminal shroud for outgoing MCCB type NZM1 1P
Terminal shroud for outgoing MCCB type NZM1 3P
Shunt trip 208-250AC/DC for NZM1 (excl. 1P)
Shunt trip 208-250AC/DC for NZM2/N2
Undervoltage release 208–240AC for NZM1 (excl. 1P)
Undervoltage release 208–240AC for NZM2/N2
Handle lock for MCCB type NZM1
Handle lock for MCCB types NZM2 and NZM3
EPBN1425SXB
EPBN1BP1
EPBDLK1
NZM1-1-XKSA
NZM1-XKSA
259744
259763
259471
259499
260199
260201
Cable extension boxes – side mounted
Description Eaton list
number
To fit 4 way panelboard EPBN1425
To fit 6 way panelboard EPBN1625
To fit 8 way panelboard EPBN1825
To fit 12 way panelboard EPBN11225
EPBN1425SXB
EPBN1625SXB
EPBN1825SXB
EPBN11225SXB
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
67
5.1
EPBN1EX250
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 250A – outgoing device ratings up to 160A
Cable extension boxes – top/bottom mounted
Description Eaton list
number
EPBN1EX250
250mm high
EPBN1CX250
Corner filler boxes
Description Eaton list
number
EPBN1CX250
For use where top/bottom/meter boxes are fitted in conjunction with side cable boxes
EPBN1EXDIN
Din rail extension boxes
Description Height
Number 18mm
Din modules
Eaton list
number
For housing din rail mounted command/control equipment, ie timers/contactors
15
EPBN1EXDIN
250mm
Metering components – refer to pages 86-89 for more explanation
(Requires appropriate incomer connection kit with metering option selected from above)
EPBMETER1
Incoming metering – digital
• Includes both Modbus and Pulsed outputs
Description
Eaton list
number
Incomer meter enclosure (can be fitted to top or bottom of panelboard). Meter not included
Multifunction meter measuring parameters:
Voltage (P-P / P/N) (individual/average)
Current (I1, I2, I3) (individua/average)
Frequency
Power factor (individual/average)
Active, reactive, apparent power (individual/total)
Active, reactive, apparent energy (total)
Voltage supply to meter tap off kit (includes protection fuses). One per panelboard required, irrespective of number of meters
EPBN1EX250M
68
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EPBMETER1
EPBN1SUPM
5.1
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 250A – outgoing device ratings up to 160A
EPBN11225SXM
Outgoing side mounted metering – digital
Description
Number of meter
Number of meter
spaces in metering blanking plates
enclosureincluded
Eaton list
number
Side mounted metering enclosure to fit 4 way panelboard EPBN1425
21EPBN1425SXM1)
Side mounted metering enclosure to fit 6 way panelboard EPBN1625
32EPBN1625SXM1)
Side mounted metering enclosure to fit 8 way panelboard EPBN1825
43EPBN1825SXM1)
Side mounted metering enclosure to fit 12 way panelboard EPBN11225 65EPBN11225SXM1)
Outgoing CT Kit (1 off required per metered outgoing TP way) to suit NZM1 frame MCCBs.
160A maximum rating. Includes CT to meter plug-in cable and meter to meter voltage supply linking cable with connectors
EPBCTMT160
Three phase splitter box to allow separate monitoring of a three phase current transformer on individual energy meters
EPBCTMT3P
Meter includes both Modbus and Pulsed outputs
Multifunction meter measuring parameters:
Voltage (P-P / P/N) (individual/average)
Current (I1, I2, I3) (individua/average)
Frequency
Power factor (individual/average)
Active, reactive, apparent power (individual/total)
Active, reactive, apparent energy (total)
EPBMETER1
Voltage supply to meter tap off kit (includes protection fuses), not required if incoming metering is being used
EPBN1SUPM
Extra long (2m) meter to meter voltage supply linking cable with connectors
EPBN3LKKTM
Extra long (2.5m) CT to meter plug-in cable
EPBN3LKRJ45
CT supporting mount to allow CT to be fitted in side mounted cable extension box if terminal shields being fitted to MCCBs
EPBSXBCTMT
Spare blanking plate for unused meter ways in metering enclosure
EM96BP
1)
EPBN1SPD123
S uffix ‘M’ indicates cut-outs for meters and hinged door for outgoing metering suitable for left and right
hand applications. Can be used with side mounted cable extension boxes if required
Transient voltage surge suppression units, externally mounted in own enclosure
• See page 90 for full technical specification
• Includes 63A TP NZM1 MCCB for protection/isolation
• See page 131 for dimensions
Description
Eaton list
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes III and IV in accordance with IEC 62305
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes I, II, III and IV in accordance with IEC 62305
EPBN1SPD123
EPBN1SPD1234
number
EPBKEL250
Earth leakage protection
• Direct bolt-on module used in conjunction with 4-pole incomer device, 250A maximum rating
• Sensitivity adjustable from 0.1A to 3A. Time delay adjustable from 60ms to 450ms
Description Eaton list
number
Earth leakage protection add-on kit for incomer device. 250mm high extension box included
EPBKEL250
Cable size summary
Incoming cables
MCCB or switch disconnector size max/type
185mm2/tunnel terminals
Direct connection lugs incomer
M8
NeutralM8
EarthM10
Outgoing cables
NZM1 MCCB size max/type
70mm2/cable clamp (95mm2 can be fitted depending on cable manufacturer)
Neutral size max/type
50mm2 tunnel terminals and 2 x M8 bolts
Earth size max/type
50mm2 tunnel terminals
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
69
5.2
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 400A – outgoing device ratings up to 160A
Specification
Features
• Panelboards to IEC61439-2. Form 3b Type 2
• 6 or 12 outgoing TP ways
• Busbar system KEMA certified 50kA Icc, Icw 30kA 1s
• Outgoing devices; NZM1 16A–125A SP & 20A–160A TP
• IP3X construction
• Tin–plated busbars
• MCCBs to IEC60947-2. kA ratings shown are Ics=Icu at 400V ac
• Can be configured for incomer device at top of panelboard
• Switch disconnectors to IEC60947-3
• Removable side gland plates as standard
• Wide range of extension boxes, metering, surge
protection, and earth leakage incomer options available
See pages 149 -151 for dimensions.
EPBN1640
NZMN3-A400
• Minimum ordering requirement: panelboard + incoming device + incomer
connection kit + outgoing devices + blanking plates
Description
Associated
incoming device
Current rating
No. of ways
(A)
Eaton list
number
Incoming rating up to 400A,
outgoing ratings up to 160A
NZM3 MCCB or N3 switch disconnector
400
6
EPBN1640
or direct lugs connection12
EPBN11240
MCCB incoming device
• 50kA
• Select appropriate incomer device from table below
• Maximum cable capacity 240mm2
• Adjustable trip. Thermal trip adjustment 0.8 to 1 x In, Magnetic trip adjustment 6 to 10 x In
Poles
Incoming device
type
Current rating
(A)
3-pole
NZM3 MCCB 4-pole (3 phase and switched neutral)
NZM3 MCCB N3-400
Eaton list number
Short circuit rating
250
NZMN3-A250
320
NZMN3-A320
400
NZMN3-A400
250
NZMN3-4-A250
320
NZMN3-4-A320
400
NZMN3-4-A400
Switch disconnector (non-automatic) incoming device
• Select appropriate incomer device from table below
• Maximum cable capacity 240mm2
70
Poles
Incoming device
type
Current rating
(A)
Eaton list
number
3-pole
4-pole
N2 switch disconnector
N2 switch disconnector
400
400
N3-400
N3-4-400
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
5.2
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 400A – outgoing device ratings up to 160A
EPBKN2403
Incomer connection kit/metering connection kit
• See incoming metering section below to order metering components
NZMB1-1-AF63
and NZMB1-A160
Poles
Maximum rating
Eaton list
(A)number
3-pole incomer connection kit
3-pole incomer connection kit – includes metering CT and CT to meter cable
4-pole incomer connection kit
4-pole incomer connection kit – includes metering CT and CT to meter cable
Direct connection lugs kit
Direct connection lugs kit – includes metering CT and CT to meter cable
Adapter kit for use when incomer device mounted at top of panelboard
400
400
400
400
400
400
370
1)
Requires use of cable extension box EPBN2EX250
2)
Maximum rating of panelboard when top fed is 370A
EPBKN2403
EPBKN2403M
EPBKN24041)
EPBKN2404M
EPBKN240L
EPBKN240LM
EPBKTFSN32)
Outgoing devices – NZM1 frame MCCBs
• Maximum cable capacity 70mm2
• Single pole fixed trip. Triple pole thermal trip adjustment 0.8 to 1 x In, magnetic trip adjustment 6 to 10 x In
EPBDLK1
Rating
(A)
Eaton list number
Single pole 25kA
16
20
32
40
50
63
80
100
125
160
NZMB1-1-AF16–
NZMB1-1-AF20NZMB1-A20
NZMB1-1-AF32NZMB1-A32
NZMB1-1-AF40NZMB1-A40
NZMB1-1-AF50NZMB1-A50
NZMB1-1-AF63NZMB1-A63
NZMB1-1-AF80NZMB1-A80
NZMB1-1-AF100NZMB1-A100
NZMB1-1-AF125NZMB1-A125
–NZMB1-A160
1)
36kA triple pole also available, change ‘B’ to ‘C’ in list number, ie NZMC1-A125
2)
50kA triple pole also available, change ‘B’ to ‘N’ in list number, ie NZMN1-A125
Triple pole 25kA1) 2)
Accessories
Description Eaton list
number
SP blanking module NZM1 frame (i.e. order 3 per TP way)
Panel door lock with 2 keys (have same key code)
Terminal shroud for outgoing MCCB type NZM1 1P
Terminal shroud for outgoing MCCB type NZM1 3P
Shunt trip 208–250AC/DC for NZM1 (excl. 1P)
Shunt trip 208–250AC/DC for NZM3/N3
Undervoltage release 208–240AC for NZM1 (excl. 1P)
Undervoltage release 208–240AC for NZM3/N3
Handle lock for MCCB type NZM1
Handle lock for MCCB types NZM2 and NZM3
EPBN21240SXB
EPBN1BP1
EPBDLK1
NZM1-1-XKSA
NZM1-XKSA
259744
259763
259471
259499
260199
260201
Cable extension boxes – side mounted
Description Eaton list
number
To fit 6 way panelboard EPBN1640
To fit 12 way panelboard EPBN11240
EPBN2640SXB
EPBN21240SXB
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
71
5.2
EPBN2EX250
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 400A – outgoing device ratings up to 160A
Cable extension boxes – top/bottom mounted
Description Eaton list
number
EPBN2EX250
250mm high
EPBN2CX250
Corner filler boxes
Description Eaton list
number
EPBN2CX250
For use where top/bottom/meter boxes are fitted in conjunction with side cable boxes
EPBN2EXDIN
Din rail extension boxes
Description Height
Number 18mm
Din modules
Eaton list
number
For housing din rail mounted command/control equipment, ie timers/contactors
15
EPBN2EXDIN
250mm
Metering components – refer to pages 86-89 for more explanation
(Requires appropriate incomer connection kit with metering option selected from above)
EPBN2EX250M
Incoming metering – digital
• Includes both Modbus and Pulsed outputs
• See page 86 for detailed selection guide
Description
Eaton list
Incomer meter enclosure (can be fitted to top or bottom of panelboard). Meter not included
Multifunction meter measuring parameters:
Voltage (P-P / P/N) (individual/average)
Current (I1, I2, I3) (individual/average)
Frequency
Power factor (individual/average)
Active, reactive, apparent power (individual/total)
Active, reactive, apparent energy (total)
Voltage supply to meter tap off kit (includes protection fuses). One per panelboard required, irrespective of number of meters
EPBN2EX250M
number
72
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EPBMETER1
EPBN3SUPM
5.2
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 400A – outgoing device ratings up to 160A
EPBN21240SXM
Outgoing side mounted metering – digital
• See page 88 for detailed selection guide
Description
Number of meter
Number of meter
spaces in metering blanking plates
enclosureincluded
Side mounted metering enclosure to fit 6 way panelboard EPBN1640
3
2
Side mounted metering enclosure to fit 12 way panelboard EPBN11240
6
5
Outgoing CT Kit (1 off required per metered outgoing TP way) to suit NZM1 frame MCCBs. 160A maximum rating.
Includes CT to meter plug-in cable and meter to meter voltage supply linking cable with connectors
Outgoing CT Kit (1 off required per metered outgoing TP way) to suit NZM1 frame MCCBs. 250A maximum rating.
Includes CT to meter plug-in cable and meter to meter voltage supply linking cable with connectors
Three phase splitter box to allow separate monitoring of a three phase current transformer on individual energy meters
Meter includes both Modbus and Pulsed outputs
Multifunction meter measuring parameters:
Voltage (P-P / P/N) (individual/average)
Current (I1, I2, I3) (individual/average)
Frequency
Power factor (individual/average)
Active, reactive, apparent power (individual/total)
Active, reactive, apparent energy (total)
Voltage supply to meter tap off kit (includes protection fuses), not required if incoming metering is being used
Extra long (2m) meter to meter voltage supply linking cable with connectors
Extra long (2.5m) CT to meter plug-in cable
CT supporting mount to allow CT to be fitted in side mounted cable extension box if terminal shields being fitted to MCCBs
Spare blanking plate for unused meter ways in metering enclosure
1)
EPBN1SPD123
Eaton list
number
EPBN2640SXM1)
EPBN21240SXM1)
EPBCTMT160
EPBCTMT250
EPBCTMT3P
EPBMETER1
EPBN3SUPM
EPBN3LKKTM
EPBN3LKRJ45
EPBSXBCTMT
EM96BP
S uffix ‘M’ indicates cut-outs for meters and hinged door for outgoing metering suitable for left and right
hand applications. Can be used with side mounted cable extension boxes if required
Transient voltage surge suppression units, externally mounted in own enclosure
• See page 90 for full technical specification
• Includes 63A TP NZM1 MCCB for protection/isolation
• See page 131 for dimensions
Description
Eaton list
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes III and IV in accordance with IEC 62305
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes I, II, III and IV in accordance with IEC 62305
EPBN1SPD123
EPBN1SPD1234
number
EPBKEL400
Earth leakage protection
• Kit comprises 350mm high extension box fitted with earth leakage relay, core balance
transformer, all cables/terminals/protection fuses, and 230V shunt trip (for tripping of
incomer device). Requires 4-pole incomer device. 400A maximum rating
• Sensitivity adjustable from 30mA to 5A. Time delay adjustable from 0.02 to 5 seconds
Description Eaton list
number
Earth leakage protection add-on module for incomer device
EPBKEL400
Cable size summary
Incoming cables
MCCB or switch disconnector size max/type
240mm2/M12 bolt
Direct connection lugs incomer
M12
NeutralM8
EarthM10
Outgoing cables
NZM1 MCCB size max/type
70mm2/cable clamp. (95mm2 can be fitted depending on cable manufacturer)
Neutral size max/type
50mm2 tunnel terminals and 2 x M8 bolts
Earth size max/type
50mm2 tunnel terminals
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
73
5.3
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 400A – outgoing device ratings up to 250A
Specification
Features
• Panelboards to IEC61439-2. Form 3b Type 2
• 6, 12 or 18 outgoing TP ways
• Busbar system KEMA certified 50kA Icc, Icw 35kA 1s
• Outgoing devices; these panelboards utilise two
frame sizes of MCCB: NZM2 125A–250A TP, and
NZM1 SP 16A–125A or TP 20A–160A
• IP3X construction
• MCCBs to IEC60947-2. kA ratings shown are Ics=Icu at 400V ac
• Switch disconnectors to IEC60947-3
• Tin–plated busbars
• Can be configured for incomer device at top of panelboard
• Removable side gland plates as standard
• Wide range of extension boxes, metering, surge
protection, and earth leakage incomer options available
See pages 149 -151 for dimensions.
EPBN2640
• Minimum ordering requirement: panelboard + incoming device + incomer
connection kit + outgoing devices + blanking plates
Description
Associated
incoming device
Current
No. of outgoing ways
rating (A)
Incoming rating up to 400A, outgoing ratings up to 250A
NZM3 MCCB or N3 Switch Disconnector
400
or direct lugs connection
NZMN3-A400
Eaton list
number
6 (2 x 250A + 4 x 160A) EPBN2640
12 (2 x 250A + 10 x 160A) EPBN21240
18 (2 x 250A + 16 x 160A) EPBN21840
MCCB incoming device
• 50kA
• Select appropriate incomer device from table below
• Maximum cable capacity 240mm2
• Adjustable trip. Thermal trip adjustment 0.8 to 1 x In, Magnetic trip adjustment 6 to 10 x In
Poles
Incoming device
type
Current rating
Eaton list
(A)number
3-pole
NZM3 MCCB 4-pole (3 phase and switched neutral)
NZM3 MCCB N3-400
250
NZMN3-A250
320
NZMN3-A320
400
NZMN3-A400
250
NZMN3-4-A250
320
NZMN3-4-A320
400
NZMN3-4-A400
Switch disconnector (non-automatic) incoming device
• Select appropriate incomer device from table below
• Maximum cable capacity 240mm2
74
Poles
Incoming device
type
Current rating
(A)
Eaton list
number
3-pole
4-pole
N2 switch disconnector
N2 switch disconnector
400
400
N3-400
N3-4-400
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
5.3
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 400A – outgoing device ratings up to 250A
EPBKN2404
Incomer connection kit/metering connection kit
• See incoming metering section below to order metering components
NZMC2-A250-BT
Poles
Maximum rating
Eaton list
(A)number
3-pole incomer connection kit
3-pole incomer connection kit – includes metering CT and CT to meter cable
4-pole incomer connection kit
4-pole incomer connection kit – includes metering CT and CT to meter cable
Direct connection lugs kit
Direct connection lugs kit – includes metering CT and CT to meter cable
Adapter kit for use when incomer device mounted at top of panelboard
400
400
400
400
400
400
370
1)
Requires use of cable extension box EPBN2EX250
2)
Maximum rating of panelboard when top fed is 370A
EPBKN2403
EPBKN2403M
EPBKN24041)
EPBKN2404M
EPBKN240L
EPBKN240LM
EPBKTFSN32)
Outgoing devices – NZM2 frame MCCBs
• Maximum cable capacity 185mm2
• Up to 2 can be fitted
• Adjustable trip. Thermal trip adjustment 0.8 to 1 x In, magnetic trip adjustment 6 to 10 x In
NZMB1-1-AF63
and NZMB1-A160
Rating
(A)
Eaton list number
Triple pole 36kA
125
160
200
250
NZMC2-A125-BTNZMN2-A125-BT
NZMC2-A160-BTNZMN2-A160-BT
NZMC2-A200-BTNZMN2-A200-BT
NZMC2-A250-BTNZMN2-A250-BT
Triple pole 50kA
Outgoing devices – NZM1 frame MCCBs
• Maximum cable capacity 70mm2
• Single pole fixed trip. Triple pole thermal trip adjustment 0.8 to 1 x In, magnetic trip adjustment 6 to 10 x In
Rating
(A)
Eaton list number
Single pole 25kA
16
20
32
40
50
63
80
100
125
160
NZMB1-1-AF16–
–
NZMB1-1-AF20NZMB1-A20 NZMC1-A20
NZMB1-1-AF32NZMB1-A32 NZMC1-A32
NZMB1-1-AF40NZMB1-A40 NZMC1-A40
NZMB1-1-AF50NZMB1-A50 NZMC1-A50
NZMB1-1-AF63NZMB1-A63 NZMC1-A63
NZMB1-1-AF80NZMB1-A80 NZMC1-A80
NZMB1-1-AF100NZMB1-A100 NZMC1-A100
NZMB1-1-AF125NZMB1-A125 NZMC1-A125
–
NZMB1-A160NZMC1-A160
1)
EPBN1BP1
tunnel terminals
Triple pole 36kA1)
50kA triple pole also available, change ‘C’ to ‘N’ in list number, ie NZMN1-A125
Accessories
Description Eaton list
number
SP blanking module NZM1 frame (i.e. order 3 per TP way)
TP blanking module NZM2 frame
Panel door lock with 2 keys (have same key code)
Terminal shroud for outgoing MCCB type NZM1 1P
Terminal shroud for outgoing MCCB type NZM1 3P
Terminal shroud for outgoing MCCB type NZM2 3P
Shunt trip 208–250AC/DC for NZM1 (excl. 1P)
Shunt trip 208–250AC/DC for NZM2/N2
Shunt trip 208–250AC/DC for NZM3/N3
Undervoltage release 208–240AC for NZM1 (excl. 1P)
Undervoltage release 208–240AC for NZM2/N2 Undervoltage release 208–240AC for NZM3/N3
Handle lock for MCCB type NZM1
Handle lock for MCCB types NZM2 and NZM3
Triple pole 25kA
EPBN1BP1
EPBN2BP3
EPBDLK1
NZM1-1-XKSA
NZM1-XKSA
NZM2-XKSA
259744
259763
259763
259471
259499
259499
260199
260201
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
75
5.3
EPBN2640SXB
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 400A – outgoing device ratings up to 250A
Cable extension boxes – side mounted
Description Eaton list
number
To fit 6 way panelboard EPBN2640
To fit 12 way panelboard EPBN21240
To fit 18 way panelboard EPBN21840
EPBN2EX250
EPBN2640SXB
EPBN21240SXB
EPBN21840SXB
Cable extension boxes – top/bottom mounted
Description Eaton list
number
EPBN2EX250
250mm high
EPBN2CX250
Corner filler boxes
Description Eaton list
number
EPBN2CX250
For use where top/bottom/meter boxes are fitted in conjunction with side cable boxes
EPBN2EXDIN
Din rail extension boxes
Description Height
Number 18mm
Din modules
Eaton list
number
For housing din rail mounted command/control equipment, ie timers/contactors
18
EPBN2EXDIN
250mm
Metering components – refer to pages 86-89 for more explanation
(Requires appropriate incomer connection kit with metering option selected from above)
EPBN2EX250M
Incoming metering – digital
• Includes both Modbus and Pulsed outputs
• See page 86 for detailed selection guide
Description
Eaton list
Incomer meter enclosure (can be fitted to top or bottom of panelboard). Meter not included
Multifunction meter measuring parameters:
Voltage (P-P / P/N) (individual/average)
Current (I1, I2, I3) (individual/average)
Frequency
Power factor (individual/average)
Active, reactive, apparent power (individual/total)
Active, reactive, apparent energy (total)
Voltage supply to meter tap off kit (includes protection fuses). One per panelboard required, irrespective of number of meters
EPBN2EX250M
number
76
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EPBMETER1
EPBN3SUPM
5.3
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 400A – outgoing device ratings up to 250A
EPBN21240SXM
Outgoing side mounted metering – digital
• See page 88 for detailed selection guide
Description
Number of meter
Number of meter
spaces in metering blanking plates
enclosureincluded
Eaton list
number
Side mounted metering enclosure to fit 6 way panelboard EPBN2640
3
2
EPBN2640SXM1)
Side mounted metering enclosure to fit 12 way panelboard EPBN21240
6
5
EPBN21240SXM1)
Side mounted metering enclosure to fit 18 way panelboard EPBN21840 9
8
EPBN21840SXM
Outgoing CT Kit (1 off required per metered outgoing TP way) to suit NZM1 frame MCCBs. 160A maximum rating.
Includes CT to meter plug-in cable and meter to meter voltage supply linking cable with connectors
EPBCTMT160
Outgoing CT Kit (1 off required per metered outgoing TP way) to suit NZM2 frame MCCBs. 250A maximum rating.
Includes CT to meter plug-in cable and meter to meter voltage supply linking cable with connectors
EPBCTMT250
Three phase splitter box to allow separate monitoring of a three phase current transformer on individual energy metersEPBCTMT3P
Meter includes both Modbus and Pulsed outputs
Multifunction meter measuring parameters:
Voltage (P-P / P/N) (individual/average)
Current (I1, I2, I3) (individual/average)
Frequency
Power factor (individual/average)
Active, reactive, apparent power (individual/total)
Active, reactive, apparent energy (total)
EPBMETER1
Voltage supply to meter tap off kit (includes protection fuses), not required if incoming metering is being used
EPBN3SUPM
Extra long (2m) meter to meter voltage supply linking cable with connectors
EPBN3LKKTM
Extra long (2.5m) CT to meter plug-in cable
EPBN3LKRJ45
CT supporting mount to allow CT to be fitted in side mounted cable extension box if terminal shields being fitted to MCCBs
EPBSXBCTMT
Spare blanking plate for unused meter ways in metering enclosure
EM96BP
1)
EPBN1SPD123
S uffix ‘M’ indicates cut-outs for meters and hinged door for outgoing metering suitable for left and right
hand applications. Can be used with side mounted cable extension boxes if required
Transient voltage surge suppression units, externally mounted in own enclosure
• See page 90 for full technical specification
• Includes 63A TP NZM1 MCCB for protection/isolation
• See page 131 for dimensions
Description
Eaton list
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes III and IV in accordance with IEC 62305
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes I, II, III and IV in accordance with IEC 62305
EPBN1SPD123
EPBN1SPD1234
number
EPBKEL400
Earth leakage protection
• Kit comprises 350mm high extension box fitted with earth leakage relay, core balance
transformer, all cables/terminals/protection fuses, and 230V shunt trip (for tripping of
incomer device). Requires 4-pole incomer device. 400A maximum rating
• Sensitivity adjustable from 30mA to 5A. Time delay adjustable from 0.02 to 5 seconds
Description Eaton list
number
Earth leakage protection add-on kit for incomer device
EPBKEL400
Cable size summary
Incoming cables
MCCB or switch disconnector size max/type
240mm2/M12 bolt
Direct connection lugs incomer
M12
NeutralM8
EarthM10
Outgoing cables
NZM2 MCCB size max/type
185mm2/cable clamp
NZM1 MCCB size max/type
70mm2/cable clamp. (95mm2 can be fitted depending on cable manufacturer)
Neutral size max/type
50mm2 tunnel terminals and 4 x M8 bolts
Earth size max/type
50mm2 tunnel terminals and 4 x M8 bolts
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
77
5.4
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 630A – outgoing device ratings up to 250A
Specification
Features
• Panelboards to IEC61439-2. Form 3b Type 2
• 6, 12 or 18 outgoing TP ways
• Busbar system KEMA certified 50kA Icc, Icw 50kA 1s
• Outgoing devices; these panelboards utilise two
frame sizes of MCCB: NZM2 125A–250A TP, and
NZM1 SP 16A–125A or TP 20A–160A
• IP3X construction
• MCCBs to IEC60947-2. kA ratings shown are Ics=Icu at 400V ac
• Switch disconnectors to IEC60947-3
• Tin–plated busbars
• Can be configured for incomer device at top of panelboard
• Removable side gland plates as standard
• Wide range of extension boxes, metering, surge
protection, and earth leakage incomer options available
• Door lock included
See pages 149-151 for dimensions.
EPBN2863
• Minimum ordering requirement: panelboard + incoming device + incomer
connection kit + outgoing devices + blanking plates
Description
Associated
incoming device
Current
No. of outgoing ways
rating (A)
Incoming rating 630A, outgoing ratings up to 250A
NZMLW MCCB or NLW CBS
630
or direct lugs connection
NZMLW-630
Eaton list
number
8 (4 x 250A + 4 x 160A) EPBN2863
12 (4 x 250A + 8 x 160A) EPBN21263
18 (4 x 250A + 14 x 160A) EPBN21863
MCCB incoming device
• 50kA
• Select appropriate incomer device from table below
• Maximum cable capacity 2 x 300mm2
• Thermal trip fixed at 630A, Magnetic trip adjustment 2 to 8 x In
NLW-630
Poles
Incoming device
type
Current rating
Eaton list
(A)number
3-pole
4-pole (3 phase and switched neutral)
NZMLW MCCB NZMLW MCCB 630
630
NZMLW-A630
NZMLW-4-A630
Circuit breaker switch incoming device
• 50kA
• Select appropriate incomer device from table below
• Maximum cable capacity 2 x 300mm2
EPBKN2633
Poles
Incoming device
type
Current rating
Eaton list
(A)number
3-pole
4-pole
NLW Circuit breaker switch
NLW Circuit breaker switch
630
630
NLW-630
NLW-4-630
Incomer connection kit/metering connection kit
• See incoming metering section below to order metering components
Poles
Maximum rating
Eaton list
(A)number
3-Pole incomer connection kit
3-Pole incomer connection kit – includes metering CT and CT to meter cable
4-Pole incomer connection kit
4-Pole incomer connection kit – includes metering CT and CT to meter cable
Direct connection lugs kit
Direct connection lugs kit – includes metering CT and CT to meter cable
Adapter kit for use when incomer device mounted at top of panelboard
630
630
630
630
630
630
570
1)
78
Maximum rating of panelboard when top fed is 570A
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EPBKN2633
EPBKN2633M
EPBKN2634
EPBKN2634M
EPBKN263L
EPBKN263LM
EPBKTFSLW1)
5.4
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 630A – outgoing device ratings up to 250A
NZMC2-A250-BT
Outgoing devices – NZM2 frame MCCBs
• Maximum cable capacity 185mm2
• Up to 4 can be fitted
• Adjustable trip. Thermal trip adjustment 0.8 to 1 x In, magnetic trip adjustment 6 to 10 x In
NZMB1-1-AF63
and NZMB1-A160
Rating
(A)
Eaton list number
Triple pole 36kA
125
160
200
250
NZMC2-A125-BTNZMN2-A125-BT
NZMC2-A160-BTNZMN2-A160-BT
NZMC2-A200-BTNZMN2-A200-BT
NZMC2-A250-BTNZMN2-A250-BT
Triple pole 50kA
Outgoing devices – NZM1 frame MCCBs
• Maximum cable capacity 70mm2
• Single pole fixed trip. Triple pole thermal trip adjustment 0.8 to 1 x In, magnetic trip adjustment 6 to 10 x In
Rating
(A)
Eaton list number
Single pole 25kA
16
20
32
40
50
63
80
100
125
160
NZMB1-1-AF16–
–
NZMB1-1-AF20NZMB1-A20 NZMC1-A20
NZMB1-1-AF32NZMB1-A32 NZMC1-A32
NZMB1-1-AF40NZMB1-A40 NZMC1-A40
NZMB1-1-AF50NZMB1-A50 NZMC1-A50
NZMB1-1-AF63NZMB1-A63 NZMC1-A63
NZMB1-1-AF80NZMB1-A80 NZMC1-A80
NZMB1-1-AF100NZMB1-A100 NZMC1-A100
NZMB1-1-AF125NZMB1-A125 NZMC1-A125
–
NZMB1-A160NZMC1-A160
1)
EPBN1BP1
Triple pole 25kA
Triple pole 36kA1)
50kA triple pole also available, change ‘C’ to ‘N’ in list number, ie NZMN1-A125
Accessories
Description Eaton list
number
SP blanking module NZM1 frame (i.e. order 3 per TP way)
TP blanking module NZM2 frame
Terminal shroud for outgoing MCCB type NZM1 1P
Terminal shroud for outgoing MCCB type NZM1 3P
Terminal shroud for outgoing MCCB type NZM2 3P
Shunt trip 208–250AC/DC for NZM1 (excl. 1P)
Shunt trip 208–250AC/DC for NZM2/N2
Shunt trip 110V–240VAC for NZMLW/NLW
Undervoltage release 208–240AC for NZM1 (excl. 1P)
Undervoltage release 208–240AC for NZM2/N2
Undervoltage release 240VAC for NZMLW/NLW
Handle lock for MCCB type NZM1
Handle lock for MCCB types NZM2 and NZM3
EPBN21863SXB
EPBN1BP1
EPBN2BP3
NZM1-1-XKSA
NZM1-XKSA
NZM2-XKSA
259744
259763
SNT4LP11K
259471
259499
UVH4LP11K
260199
260201
Cable extension boxes – side mounted
Description Eaton list
number
To fit 8 way panelboard EPBN2863
To fit 12 way panelboard EPBN21263
To fit 18 way panelboard EPBN21863
EPBN21263SXB
EPBN21263SXB
EPBN21863SXB
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
79
5.4
EPBN3EX250
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 630A – outgoing device ratings up to 250A
Cable extension boxes – top/bottom mounted
Description Eaton list
number
EPBN3EX250
250mm high
EPBNCX250
Corner filler boxes
Description Eaton list
number
EPBN2CX250
For use where top/bottom/meter boxes are fitted in conjunction with side cable boxes
EPBN3EXDIN
Din rail extension boxes
Description Height
Number 18mm
Din modules
Eaton list
number
For housing din rail mounted command/control equipment, ie timers/contactors
30
EPBN3EXDIN
250mm
Metering components – refer to pages 86-89 for more explanation
(Requires appropriate incomer connection kit with metering option selected from above)
EPBN3EX250M
Incoming metering – digital
• Includes both Modbus and Pulsed outputs
• See page 86 for detailed selection guide
Description
Eaton list
Incomer meter enclosure (can be fitted to top or bottom of panelboard). Meter not included
Multifunction meter measuring parameters:
Voltage (P-P / P/N) (individual/average)
Current (I1, I2, I3) (individual/average)
Frequency
Power factor (individual/average)
Active, reactive, apparent power (individual/total)
Active, reactive, apparent energy (total)
Voltage supply to meter tap off kit (includes protection fuses). One per panelboard required, irrespective of number of meters
EPBN3EX250M
number
80
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EPBMETER1
EPBN3SUPM
5.4
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 630A – outgoing device ratings up to 250A
EPBN21263SXM
Outgoing side mounted metering – digital
• See page 88 for detailed selection guide
Description
Number of meter
Number of meter
spaces in metering blanking plates
enclosureincluded
Eaton list
number
Side mounted metering enclosure to fit 8 way panelboard EPBN2863
65EPBN21263SXM
Side mounted metering enclosure to fit 12 way panelboard EPBN21263 65EPBN21263SXM
Side mounted metering enclosure to fit 18 way panelboard EPBN21863 98EPBN21863SXM
Outgoing CT Kit (1 off required per metered outgoing TP way) to suit NZM1 frame MCCBs. 160A maximum rating.
Includes CT to meter plug-in cable and meter to meter voltage supply linking cable with connectors
EPBCTMT160
Outgoing CT Kit (1 off required per metered outgoing TP way) to suit NZM2 frame MCCBs. 250A maximum rating.
Includes CT to meter plug-in cable and meter to meter voltage supply linking cable with connectors
EPBCTMT250
Three phase splitter box to allow separate monitoring of a three phase current transformer on individual energy meters
EPBCTMT3P
Meter includes both Modbus and Pulsed outputs
Multifunction meter measuring parameters:
Voltage (P-P / P/N) (individual/average)
Current (I1, I2, I3) (individual/average)
Frequency
Power factor (individual/average)
Active, reactive, apparent power (individual/total)
Active, reactive, apparent energy (total)
EPBMETER1
Voltage supply to meter tap off kit (includes protection fuses), not required if incoming metering is being used
EPBN3SUPM
Extra long (2m) meter to meter voltage supply linking cable with connectors
EPBN3LKKTM
Extra long (2.5m) CT to meter plug-in cable
EPBN3LKRJ45
CT supporting mount to allow CT to be fitted in side mounted cable extension box if terminal shields being fitted to MCCBs
EPBSXBCTMT
Spare blanking plate for unused meter ways in metering enclosure
EM96BP
1)
EPBN1SPD123
S uffix ‘M’ indicates cut-outs for meters and hinged door for outgoing metering suitable for left and right
hand applications. Can be used with side mounted cable extension boxes if required
Transient voltage surge suppression units, externally mounted in own enclosure
• See page 90 for full technical specification
• Includes 63A TP NZM1 MCCB for protection/isolation
• See page 131 for dimensions
Description
Eaton list
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes III and IV in accordance with IEC 62305
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes I, II, III and IV in accordance with IEC 62305
EPBN1SPD123
EPBN1SPD1234
number
EPBKEL800
Earth leakage protection
• Kit comprises 350mm high extension box fitted with earth leakage relay, core balance
transformer, all cables/terminals/protection fuses, and 230V shunt trip (for tripping of
incomer device). Requires 4-pole incomer device. 630A maximum rating
• Sensitivity adjustable from 30mA to 5A. Time delay adjustable from 0.02 to 5 seconds
Description Eaton list
number
Earth leakage protection add-on kit for incomer device
EPBKEL800
Cable size summary
Incoming cables
MCCB or switch disconnector size max/type
2 x 300mm2/M10 bolt
Direct connection lugs incomer
M12
NeutralM12
EarthM10
Outgoing cables
NZM2 MCCB size max/type
185mm2/cable clamp
NZM1 MCCB size max / type
70mm2/cable clamp. (95mm2 can be fitted depending on cable manufacturer)
Neutral size max / type
50mm2 tunnel terminals and 4 x M8 bolts
Earth size max / type
50mm2 tunnel terminals and 8 x M8 bolts
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
81
5.5
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 800A – outgoing device ratings up to 400A
Specification
Features
• Panelboards to IEC61439-2. Form 3b Type 2
• 8, or 12 outgoing TP ways
• Busbar system KEMA certified 50kA Icc, Icw 50kA 1s
• Outgoing devices; these panelboards utilise three frame
sizes of MCCB: NZM3 250A -400A, NZM2 125A–250A
TP, and NZM1 SP 16A–125A or TP 20A–160A
• IP3X construction
• Outgoing MCCBs to IEC60947-2. kA ratings
shown are Ics=Icu at 400V ac
• Tin–plated busbars
• Can be configured for incomer device at top of panelboard
• Incoming MCCB/circuit breaker switch to
IEC60947-2 Icu 50kA, Ics 25kA
• Removable side gland plates as standard
• Wide range of extension boxes, metering, surge
protection, and earth leakage incomer options available
• Door lock included
See pages 149-151 for dimensions.
EPBN31280
• Minimum ordering requirement: panelboard + incoming device + incomer
connection kit + outgoing devices + blanking plates
Description
Associated
incoming device
Current
No. of outgoing ways
rating (A)
Incoming rating 800A, NZMLW MCCB or NLW CBS
800
outgoing ratings up to 400A
NZMLW-800
Eaton list
number
8 (2 x 400A + 2 x 250A + 4 x 160A) EPBN3880
12 (2 x 400A + 4 x 250A + 6 x 160A) EPBN31280
MCCB incoming device
• 50kA
• Select appropriate incomer device from table below
• Maximum cable capacity 2 x 300mm2
• Thermal trip fixed at 800A, Magnetic trip adjustment 2 to 8 x In
NLW-800
Poles
Incoming device
type
Current rating
(A)
Eaton list number
Short circuit rating 50kA
3-pole
4-pole (3 phase and switched neutral)
NZMLW MCCB NZMLW MCCB 800
800
NZMLW-A800
NZMLW-4-A800
Circuit breaker switch incoming device
• 50kA
• Select appropriate incomer device from table below
• Maximum cable capacity 2 x 300mm2
EPBKN3803
Poles
Incoming device
type
Current rating
Eaton list
(A)number
3-pole
4-pole
NLW Circuit breaker switch
NLW Circuit breaker switch
800
800
NLW-800
NLW-4-800
Incomer connection kit/metering connection kit
• See incoming metering section below to order metering components
Poles
Maximum rating
Eaton list
(A)number
3-Pole incomer connection kit
3-Pole incomer connection kit – includes metering CT and CT to meter cable
4-Pole incomer connection kit
4-Pole incomer connection kit – includes metering CT and CT to meter cable
Adapter kit for use when incomer device mounted at top of panelboard
800
800
800
800
720
1)
82
Maximum rating of panelboard when top fed is 720A
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EPBKN3803
EPBKN3803M
EPBKN3804
EPBKN3804M
EPBKTFSLW1)
5.5
Memshield 3 panelboards and associated devices
Incoming device ratings up to 800A – outgoing device ratings up to 400A
NZMN3-A400-BT
Outgoing devices – NZM3 frame MCCBs.
• Maximum cable capacity 240mm2
• Up to 2 can be fitted
• Adjustable trip. Thermal trip adjustment 0.8 to 1 x In, magnetic trip adjustment 6 to 10 x In
NZMC2-A250-BT
Rating
(A)
Eaton list number
Triple pole 50kA
250
320
400
NZMN3-A250-BT
NZMN3-A320-BT
NZMN3-A400-BT
Outgoing devices – NZM2 frame MCCBs
• Maximum cable capacity 185mm2
• Up to 4 can be fitted
• Adjustable trip. Thermal trip adjustment 0.8 to 1 x In, magnetic trip adjustment 6 to 10 x In
NZMB1-1-AF63
and NZMB1-A160
Rating
(A)
Eaton list number
Triple pole 36kA
125
160
200
250
NZMC2-A125-BTNZMN2-A125-BT
NZMC2-A160-BTNZMN2-A160-BT
NZMC2-A200-BTNZMN2-A200-BT
NZMC2-A250-BTNZMN2-A250-BT
Triple pole 50kA
Outgoing devices – NZM1 frame MCCBs
• Maximum cable capacity 70mm2
• Single pole fixed trip. Triple pole thermal trip adjustment 0.8 to 1 x In, magnetic trip adjustment 6 to 10 x In
Rating
(A)
Eaton list number
Single pole 25kA
16
20
32
40
50
63
80
100
125
160
NZMB1-1-AF16–
–
NZMB1-1-AF20NZMB1-A20 NZMC1-A20
NZMB1-1-AF32NZMB1-A32 NZMC1-A32
NZMB1-1-AF40NZMB1-A40 NZMC1-A40
NZMB1-1-AF50NZMB1-A50 NZMC1-A50
NZMB1-1-AF63NZMB1-A63 NZMC1-A63
NZMB1-1-AF80NZMB1-A80 NZMC1-A80
NZMB1-1-AF100NZMB1-A100 NZMC1-A100
NZMB1-1-AF125NZMB1-A125 NZMC1-A125
–
NZMB1-A160NZMC1-A160
1)
EPBN3BP3
Triple pole 25kA
Triple pole 36kA1)
50kA triple pole also available, change ‘C’ to ‘N’ in list number, ie NZMN1-A125
Accessories
Description Eaton list
number
SP blanking module NZM1 frame (i.e. order 3 per TP way)
EPBN1BP1
TP blanking module NZM2 frame
EPBN2BP3
TP blanking module NZM3 frame
EPBN3BP3
Terminal shroud for outgoing MCCB type NZM1 1P
NZM1-1-XKSA
Terminal shroud for outgoing MCCB type NZM1 3P
NZM1-XKSA
Terminal shroud for outgoing MCCB type NZM2 3P
NZM2-XKSA
Terminal shroud for outgoing MCCB type NZM3 3P NZM3-XKSA
Shunt trip 208–250AC/DC for NZM1 (excl. 1P)
259744
Shunt trip 208–250AC/DC for NZM2/N2
259763
Shunt trip 208–250AC/DC for NZM3/N3
259763
Shunt trip 110V–240VAC for NZMLW/NLW
SNT4LP11K
Undervoltage release 208–240AC for NZM1 (excl. 1P)
259471
Undervoltage release 208–240AC for NZM2/N2
259499
Undervoltage release 208–240AC for NZM3/N3
259499
Undervoltage release 240VAC for NZMLW/NLW
UVH4LP11K
Handle lock for MCCB type NZM1
260199
Handle lock for MCCB types NZM2 and NZM3
260201
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
83
5.5
EPBN21863SXB
Memshield 3 MCCB panelboards and associated devices
Incoming device ratings up to 800A – outgoing device ratings up to 400A
Cable extension boxes – side mounted
Description Eaton list
number
To fit 8 way panelboard EPBN3880
To fit 12 way panelboard EPBN31280
EPBN3EX250
EPBN21263SXB
EPBN21863SXB
Cable extension boxes – top/bottom mounted
Description Eaton list
number
EPBN3EX250
250mm high
EPBN2CX250
Corner filler boxes
Description Eaton list
number
EPBN2CX250
For use where top/bottom/meter boxes are fitted in conjunction with side cable boxes
EPBN3EXDIN
Din rail extension boxes
Description Height
Number 18mm
Din modules
Eaton list
number
For housing din rail mounted command/control equipment, ie timers/contactors
30
EPBN3EXDIN
250mm
Metering components – refer to pages 86-89 for more explanation
(Requires appropriate incomer connection kit with metering option selected from above)
EPBN3EX250M
Incoming metering – digital
• Includes both Modbus and Pulsed outputs
• See page 86 for detailed selection guide
Description
Eaton list
Incomer meter enclosure (can be fitted to top or bottom of panelboard). Meter not included
Multifunction meter measuring parameters:
Voltage (P-P / P/N) (individual/average)
Current (I1, I2, I3) (individual/average)
Frequency
Power factor (individual/average)
Active, reactive, apparent power (individual/total)
Active, reactive, apparent energy (total)
Voltage supply to meter tap off kit (includes protection fuses). One per panelboard required, irrespective of number of meters
EPBN3EX250M
number
84
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EPBMETER1
EPBN3SUPM
5.5
Memshield 3 panelboards and associated devices
Incoming device ratings up to 800A – outgoing device ratings up to 400A
EPBN21263SXM
Outgoing side mounted metering – digital
• See page 88 for detailed selection guide
Description
Number of meter
Number of meter
spaces in metering blanking plates
enclosureincluded
Eaton list
number
Side mounted metering enclosure to fit 8 way panelboard EPBN3880
65EPBN21263SXM
Side mounted metering enclosure to fit 12 way panelboard EPBN31280 98EPBN21863SXM
Outgoing CT Kit (1 off required per metered outgoing TP way) to suit NZM1 frame MCCBs. 160A maximum rating.
Includes CT to meter plug-in cable and meter to meter voltage supply linking cable with connectors
EPBCTMT160
Outgoing CT Kit (1 off required per metered outgoing TP way) to suit NZM2 frame MCCBs. 250A maximum rating.
Includes CT to meter plug-in cable and meter to meter voltage supply linking cable with connectors
EPBCTMT250
Outgoing CT Kit (1 off required per metered outgoing TP way) to suit NZM3 frame MCCBs. 400A maximum rating.
Includes CT to meter plug-in cable and meter to meter voltage supply linking cable with connectors.
EPBCTMT400
Three phase splitter box to allow separate monitoring of a three phase current transformer on individual energy meters
EPBCTMT3P
Meter includes both Modbus and Pulsed outputs
Multifunction meter measuring parameters:
Voltage (P-P / P/N) (individual/average)
Current (I1, I2, I3) (individual/average)
Frequency
Power factor (individual/average)
Active, reactive, apparent power (individual/total)
Active, reactive, apparent energy (total)
EPBMETER1
Voltage supply to meter tap off kit (includes protection fuses), not required if incoming metering is being used
EPBN3SUPM
Extra long (2m) meter to meter voltage supply linking cable with connectors
EPBN3LKKTM
Extra long (2.5m) CT to meter plug-in cable
EPBN3LKRJ45
CT supporting mount to allow CT to be fitted in side mounted cable extension box if terminal shields being fitted to MCCBs
EPBSXBCTMT
Spare blanking plate for unused meter ways in metering enclosure
EM96BP
1)
EPBN1SPD123
S uffix ‘M’ indicates cut-outs for meters and hinged door for outgoing metering suitable for left and right
hand applications. Can be used with side mounted cable extension boxes if required
Transient voltage surge suppression units, externally mounted in own enclosure
• See page 90 for full technical specification
• Includes 63A TP NZM1 MCCB for protection/isolation
• See page 131 for dimensions
Description
Eaton list
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes III and IV in accordance with IEC 62305
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes I, II, III and IV in accordance with IEC 62305
EPBN1SPD123
EPBN1SPD1234
number
EPBKEL800
Earth leakage protection
• Kit comprises 350mm high extension box fitted with earth leakage relay, core balance
transformer, all cables/terminals/protection fuses, and 230V shunt trip (for tripping of
incomer device). Requires 4-pole incomer device. 800A maximum rating
• Sensitivity adjustable from 30mA to 5A. Time delay adjustable from 0.02 to 5 seconds
Description Eaton list
number
Earth leakage protection add-on kit for incomer device
EPBKEL800
Cable size summary
Incoming cables
MCCB or switch disconnector size max/type
2 x 300mm2/M12 bolt
NeutralM12
EarthM10
Outgoing cables
NZM3 MCCB size max/type
240mm2/cable clamp
NZM2 MCCB size max /type
185mm2/cable clamp
NZM1 MCCB size max /type
70mm2/cable clamp. (95mm2 can be fitted depending on cable manufacturer)
Neutral size max/type
50mm2 tunnel terminals and 4 x M8 bolts
Earth size max/type
50mm2 tunnel terminals and 8 x M8 bolts
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
85
5.6
Memshield 3 MCCB panelboards and associated devices
Plug-in incoming metering
When configuring panelboard incoming metering, simply
identify panelboard and incomer type, then order the
following modules detailed in the selection chart below-
Meter connection arrangement
1. Incoming meter connection kit
2. Incoming meter enclosure
3. Meter
4. Voltage supply to meter tap-off kit
5. Top or bottom mounted cable extension
box (When necessary see note)
Plug-in connectivity is provided between meter, CT and supply.
Incoming metering can be configured with outgoing metering.
Incoming metering module selection
Meter module
Panelboard
E PBN1425, EPBN1625, EPBN1825, EPBN11225
EPBN1640, EPBN11240
E PBN2640, EPBN21240, EPBN21840
250A 3P
250A 4P
250A 3P
400A 3P
400A 4P
400A 3P
400A 3P
400A 4P
400A 3P
MCCB/switch
MCCB/switchlugsMCCB/switch
MCCB/switchlugsMCCB/switch
MCCB/switchlugs
EPBKN1253M
✓
EPBKN1254M ✓
EPBKN125LM ✓
EPBKN2403M✓✓
EPBKN2404M✓✓
EPBKN240LM✓✓
Incoming meter enclosureEPBN1EX250M
✓
✓
✓
EPBN2EX250M✓
✓
✓
✓
✓
✓
MeterEPBMETER1
✓
✓
✓
✓
✓
✓
✓
✓
✓
Voltage supply to
EPBN1SUPM
✓
✓
✓
meter tap-off kit
EPBN3SUPM✓
✓
✓
✓
✓
✓
Cable extension box1)
EPBN2EX250✓
✓✓
✓
Incoming metering
connection kit
Meter module
Panelboard
E PBN2863, EPBN21263, EPBN21863
630A 3P
630A 4P
630A 3P
MCCB/switchMCCB/switch
lugs
EPBN3880, EPBN31280
800A 3P
800A 4P
MCCB/switchMCCB/switch
Incoming meteringEPBKN2633M✓
connection kit EPBKN2634M ✓
EPBKN3803M✓
EPBKN3804M✓
EPBKN263LM ✓
Incoming meter enclosureEPBN3EX250M
✓
✓
✓
✓
✓
MeterEPBMETER1
✓
✓
✓
✓
✓
Voltage supply to
EPBN3SUPM
✓
✓
✓
✓
✓
meter tap-off kit
Cable extension box1)
1)
EPBN3EX250
✓
✓✓
When incoming meter enclosure is fitted at the feed end of the panelboard there is no need for a cable extension box
86
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
✓
Memshield 3 MCCB panelboards and associated devices
Plug-in incoming metering
5.6
Meter
Meter is available with pulsed and modbus outputs.
Simply installed with 2 locking screws.
Incoming meter enclosure
250mm high enclosure with hinged front door.
Simply bolted to the top or the bottom of the panelboard.
Supply tap-off
Provision to fit tap-off to either the left and/or right hand side of the pan assembly.
Only 1 per panelboard is required but provision to fit two is an option.
Incoming metering connection kit
This includes all copper connectors, CT, shielding and CT
to meter cable. Can be top or bottom fed.
This does not include the incoming device, which has to be ordered separately.
Cable extension box (when necessary)
250mm high enclosure, fitted incoming end.
When incoming meter enclosure is fitted at the feed end of the
400A/630A/800A boards there is no need for a cable extension box.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
87
5.7
Memshield 3 MCCB panelboards and associated devices
Plug-in outgoing metering
When configuring panelboard outgoing metering, simply identify
panelboard and number of outgoing breaker type, then order
the following modules detailed in the selection chart below:
Meter connection arrangement
1. Outgoing CT kit
2. Outgoing side mounted meter extension box
3. Meter
4. Voltage supply to meter tap-off kit
5. Extra long meter to meter voltage linking kit to feed to meter
extension box on other side of panelboard if necessary
6. Extra long CT to meter linking cable if required
7. Three phase splitter box to allow separate monitoring of a three
phase current transformer on individual energy meters if required
Plug-in connectivity is provided between meter, CT and supply.
Meter module
Panelboard
EPBN1425
EPBN1625
EPBN1825
EPBN11225
EPBN1640
EPBN11240
EPBN2640
EPBN21240
EPBN21840
EPBN2863
EPBN21263
EPBN21863
EPBN3880
EPBN31280
Outgoing metering can be configured with incoming metering.
Outgoing CT kit (1 off required per outgoing way)
Outgoing side mounted
meter extension box
Meter
Voltage supply to
meter tap-off kit
CT mount for outgoing
meter cable way 1)
Extra long meter to meter voltage linking kit
Extra long CT to meter linking kit
Three phase splitter box EPBCTMT160 (NZM1 160A)
EPBCTMT250 (NZM2 250A)
EPBCTMT400 (NZM3 400A)
EPBN1425SXM
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
EPBN1625SXM
EPBN1825SXM
EPBN11225SXM
EPBN2640SXM
EPBN21240SXM
EPBN21840SXM
EPBN21263SXM
EPBN21863SXM
EPBMETER1
EPBN1SUPM
EPBN3SUPM
EPBSXBCTMT
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
EPBN3LKKTM
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
EPBN3LKRJ45
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
EPBCTMT3P ✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Outgoing metering module selection
1)
Only required when terminal shields are fitted to outgoing MCCBs. The CT can be fitted in a side-mounted cable extension box. One CT mount per outgoing CT.
88
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
✓
✓
✓
✓
Memshield 3 MCCB panelboards and associated devices
Plug-in outgoing metering
Meter
Outgoing meter kit
Meter is available with pulsed and modbus outputs.
One kit per outgoing way, includes
CT, CT to meter cable, and meter
to meter voltage linking cable.
Simply installed with 2 locking screws.
5.7
NZM1 – 160A max
NZM2 – 250A max
NZM3 – 400A max
Outgoing side mounted
meter extension box
Can be fitted on the left and right
hand side of the panelboard.
All outgoing meter apertures, except one,
have removable blanking shields fitted.
Three phase splitter box
Allows for separate monitoring of
a three phase current transformer
on individual energy meters
Supply tap-off
Provision to fit tap-off to either the left and/or right hand side of the pan assembly.
Only 1 per panelboard is required but provision to fit two is an option.
Extra long meter to meter voltage linking kit
Extra long CT to meter linking cable
Required when CT is fitted on opposite side to meter extension box. 2.5m long.
Required when:
Incoming and outgoing metering on one side = 1 off
Outgoing metering on both sides = 2 off
Incoming and outgoing metering on both sides = 3 off
2m long
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
89
5.8
Memshield 3 MCCB panelboards and associated devices
Lightning & surge suppression for MCCB panelboards
In order to enable designers, specifiers, and installers to comply
with surge protection requirements in BS 7671 - IET Wiring
Regulations - 17th Edition (Section 534), these combined
lightning arrester and surge suppression devices have been
developed specifically for applications with MCCB panelboards
ensuring outstanding product performance for all sensitive,
mission critical and general purpose loads. Providing protection
from direct and indirect lightning strikes, the IEC 61643
tested devices have impressive voltage protection levels (Up),
nominal discharge current (8/20) µs In & maximum discharge
current Imax for transient surge suppression, combined with
impulse current Iimp (10/350) µs for lightning strike protection.
These devices are fully compliant with BS EN 62305.
EPBN1SPD1234 technical summary:
• For the protection of low voltage distribution systems
against direct lightning strike into the overhead power
supply line or external lightning protection system and
against indirect lightning strike and switching operations.
• Application according to IEC 60364-5-53 Clause 534.
• Test class I, II, III in accordance with IEC 61643-1.
• SPD-type T1, T2, T3 in accordance with EN 61643-11.
• No discharge of ionised gases during operation.
• Lightning protection classes I, II, III and IV
in accordance with IEC 62305.
EPBN1SPD123 technical summary:
• For the protection of low voltage distribution systems
against transient overvoltage caused by direct and
indirect lightning strike and switching operations.
• Application according to IEC 60364-5-53 Clause 534.
• Test class I, II, III in accordance with IEC 61643-1.
• SPD-type T1, T2, T3 in accordance with EN 61643-11.
• Lightning protection classes III and IV in
accordance with IEC 62305.
EPBN1SPD123
Description Eaton list
number
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes III and IV in accordance with IEC 62305
SPD-type T1, T2, T3 in accordance with EN 61643-11, lightning protection classes I, II, III and IV in accordance with IEC 62305
90
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EPBN1SPD123
EPBN1SPD1234
5.9
Memshield 3 MCCB panelboards and associated devices
MCCB pan assemblies
MCCB pan assemblies, interiors, three
phase, with earth & neutral bars
• Eaton MCCB pan assemblies offer a high degree of
flexibility, suitable for inclusion in other factory built
assemblies and as replacements for panelboard interiors.
• For incoming and outgoing device compatibility
see associated panelboard details.
See pages 153-154 for dimensional drawings
EPBPN31280
Product range
Description Current rating
(A) Total no of
outgoing ways
Eaton list
number
Memshield 3 panelboard pan assembly 250A, 4 Way. Outgoing up to 160A
Memshield 3 panelboard pan assembly 250A, 6 Way. Outgoing up to 160A
Memshield 3 panelboard pan assembly 250A, 8 Way. Outgoing up to 160A
Memshield 3 panelboard pan assembly 250A, 12 Way. Outgoing up to 160A
Memshield 3 panelboard pan assembly 400A, 6 Way. Outgoing up to 160A
Memshield 3 panelboard pan assembly 400A, 12 Way. Outgoing up to 160A
Memshield 3 panelboard pan assembly 400A, 6 Way. Outgoing up to 250A
Memshield 3 panelboard pan assembly 400A, 12 Way. Outgoing up to 250A
Memshield 3 panelboard pan assembly 400A, 18 Way. Outgoing up to 250A
Memshield 3 panelboard pan assembly 630A, 8 Way. Outgoing up to 250A
Memshield 3 panelboard pan assembly 630A, 12 Way. Outgoing up to 250A
Memshield 3 panelboard pan assembly 630A, 18 Way. Outgoing up to 250A
Memshield 3 panelboard pan assembly 800A, 8 Way. Outgoing up to 400A
Memshield 3 panelboard pan assembly 800A, 12 Way. Outgoing up to 400A
250
250
250
250
400
400
400
400
400
630
630
630
800
800
4
6
8
12
6
12
6
12
18
8
12
18
8
12
EPBPN1425
EPBPN1625
EPBPN1825
EPBPN11225
EPBPN1640
EPBPN11240
EPBPN2640
EPBPN21240
EPBPN21840
EPBPN2863
EPBPN21263
EPBPN21863
EPBPN3880
EPBPN31280
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
91
92
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Industrial switch & fusegear
6
Eaton’s MEM series products have earned a worldwide
reputation for reliable high quality switch and
fusegear – and above all market leading status.
Constantly updated and refined to comply with
the very latest international standards, the market
leading switchgear range, specialist heavy duty
items and dedicated distribution and control
equipment fulfils the diverse requirements of the
contractor, specifier, OEM and distributor alike.
6.1
6.2
6.3
6.4
6.5
GLASGOW FUSE-SWITCH-DISCONNECTORS & SWITCH-DISCONNECTORS..................................................................... 94
GLASGOW BUSBAR CHAMBER SYSTEM................................................................................................................................ 98
EXEL 2 SWITCH-DISCONNECTORS & SWITCH-DISCONNECTOR FUSES.......................................................................... 100
ROTARY ISOLATORS AND CHANGEOVER SWITCHES ......................................................................................................... 102
EXEL – DISTRIBUTION FUSEBOARDS.................................................................................................................................... 103
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
93
6.1
Industrial switch & fusegear
Glasgow fuse-switch-disconnectors & switch-disconnectors
See page 155 for technical data and overall dimensions.
103GNL
Glasgow switch-disconnector
• All listed are TPN
Nominal unit Nominal rating, rating, Ie AC21 (A) Copper switch Motor ratings AC23A Ue 415V
links fitted kW
HP
Eaton list
number
63
100
160 (use 200A switch-disconnector)
200
315 (use 400A switch-disconnector)
400
500 (use 630A switch-disconnector)
630
800
125
125
–
315
–
630
–
1000
1000
63MLK 100MLK –
200MLK –
400MLK –
630MLK 800MLK 63GNL
103GNL
–
203GNL
–
403GNL
–
603GNL
803GNL
22
22
–
90
–
110
–
225
300
30
30
–
125
–
150
–
300
400
Stud size: 63/100A = tunnel terminal, 160/200A = M10, 300/400 = M14, 500/800A = see page 156, “copper terminal plate”
203GNC
Glasgow fuse-switch-disconnector
• Units are fitted with HRC Fuselinks of maximum rating but will accept fuselinks of a
lower rating, refer to the Paramount HRC Fuselinks section on page 106.
• SPSN and TPSN indicate switched neutral.
• Neutral makes first and breaks last.
Nominal unit rating, Ie (A)
Eaton 415V fuse(s) fitted
Suitable fuselinks
Suitable copper switch links
Motor ratings AC23A Ue 415V
Poles
kW
HP
Eaton list
number
63
63SB4
SB3 & SB4
63MLK
22
30
SPSN
61GNC
1)
DP
TPN
63GNC
TPSN
64GC
100
100SD5
SB3, SB4, SO & SD5
100MLK
22
30
SPSN
101GNC
1)
DP
TPN
103GNC
TPSN
104GC
160
160SF6
SF3 & SF6
200MLK
90
125
SPSN
151GNC
1)
DP
TPN
153GNC
TPSN
154GC
200
200SF6
SF3 & SF6
200MLK
90
125
SPSN
201GNC
1)
DP
TPN
203GNC
TPSN
204GC
315
315SF7
SF3 & SF7
400MLK
110
150
TPN
303GNC
TPSN
304GC
400
400SF8
SF3 & SF8
400MLK
110
150
TPN
403GNC
TPSN
404GC
500
500SH9
SH8 & SH9
630MLK
225
300
TPN
503GNC
630 630SH9–
630MLK 225 300 TPN
603GNC
TPSN
604GC
800
800SH10
SH8 & SH10
800MLK
300
400
TPN
803GNC
TPSN
804GC
1) If DP fuse-switch-disconnectors are required, use SPSN and replace the supplied switch link with a compatible fuselink.
Stud size: 63/100A = tunnel terminal, 160/200A = M10, 300/400 = M14, 500/800A = see page 156, “copper terminal plate”
94
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Industrial switch & fusegear
Glasgow fuse-switch-disconnectors & switch-disconnectors
50CSB
6.1
Spreader boxes
• Provide additional space for spreading multi-core PVC insulated cables
• Supplied with fixing bolts and plain bushes
• Adapter plates required for each unit, see page 96
Nominal unit rating, Ie (A)
Eaton list number
Straight
45° angled
63
100
160/200
315/400
500/630
800
50CSB50CSBA
50CSB50CSBA
60CSB60CSBA
70CSB70CSBA
90CSB90CSBA
90CSB90CSBA
Extension boxes
• For fitting to Glasgow switch units to provide additional space for spreading multi-core PVC insulated
cables with solid aluminium conductors and for some larger cables with stranded copper conductors
Nominal unit Fuse switch-disconnector/switch-disconnector
rating (A)
Eaton list
number
6361GNC
63GNC/63GNL
64GC
100101GNC
103GNC/103GNL
104GC
160151GNC
153GNC 154GC
200201GNC
203GNC/203GNL (315A AC21)
204GC
315303GNC
304GC
400
403GNC/use 403GNL (630A AC21)
404GC
500503GNC
504GC
630
603GNC/use 603GNL (1000A, AC21)
604GC
800
803GNC/use 803GNL (1000A, AC21)
804GC
1PCB1)
2PCB1)
1PCB2)
2PCB2)
2PCB3)
3PCB3)
2PCB
3PCB
4PCB
5PCB4)
1)
Not required for copper cables or al. below 35mm2
2)
Not required for copper cables or al. below 50mm2
3)
Not required for copper cables
4)
For parallel cables use 6 PCB + 802 GCC + 2 x 90 CSB or CSBA (see diagram on page 156)
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
95
6.1
506APL
Industrial switch & fusegear
Glasgow fuse-switch-disconnectors & switch-disconnectors
Adapter plate to fit spreader boxes
• Available for fitting to spreader boxes, tapped to receive Type B compression glands to BS6121-1.
Supplied complete with fixing bolts
Nominal unit rating, Ie (A)
Straight spreader box
45° angled Cable mm2 spreader box
PVC SWA stranded cables:
63
50CSB
50CSBA
16
2-core
25
2-core
35
2-core
100
50CSB
50CSBA
25
2-core
Eaton list
number
1)
4-core
1)
4-core 1)
4-core
1)
4-core
1)
35
2-core 4-core
1)
50
2-core
4-core
405 APL
1)
160
50CSB
50CSBA
50
2-core 4-core
405 APL
1)
70
2-core 4-core
405 APL
95
2-core 405 APL
4-core
505 APL
1)
60CSB
60CSBA
50
2-core 4-core
406 APL
1)
70
2-core 4-core
406 APL
95 2-core 406 APL
4-core
506 APL
1)
200
50CSB
50CSBA
70
2-core 4-core 405 APL
95
2-core 405 APL
4-core
505 APL
120
2-core 405 APL
4-core
505 APL
1)
60CSB
60CSBA
70
2-core 4-core
406 APL
95
2-core
406 APL
4-core
506 APL
120
2-core
406 APL
4-core
506 APL
150
2-core 4-core
506 APL
300/400
70CSB
70CSBA
150
– 4-core
507 APL
185
– 4-core
637 APL
240
– 4-core
637 APL
300
– 4-core
757 APL
500/630
90CSB
90CSBA
240
– 4-core
639 APL
300
– 4-core
759 APL
400
– 4-core
759 APL
Parallel cables2)
2/150
– 4-core
2 x 509 APL2)
2/185
– 4-core
2 x 639 APL2)
2/240
– 4-core
2 x 639 APL2)
800
90CSB
90CSBA
2/300
–
4-core
2 x 759 APL2)
96
1)
Sufficient spreading space in switch-disconnector units to mount ‘B’ gland on to enclosure.
2)
For 500 / 630 & 800A unit applications where parallel cables are used you need to order; 6PCB + 802GCC
(copper connection piece) + 2x 90CSB or 90CSBA see configuration on page 156.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Industrial switch & fusegear
Glasgow fuse-switch-disconnectors & switch-disconnectors
EBK110SP
6.1
Glasgow spares
Nominal unit rating, Ie (A)
Eaton list
number
Moving contact fuse carrier; 1 per pole
63
100 160…200 315…400 Fixed contact base complete; 1 per pole
63…100 160…200 315…400 (2 per pole) EBK110SP
OBK103SP
EBK105SP
EBK113SP
102GCEBSP
202GCEBSP
402GCEBSP
Aerosol spray paint, Light grey to RAL7004. Eaton list number: 2AP
PD1
Handle locking devices
• Facilities are provided for locking off operating handles
Current rating Eaton list
(A)number
PD11)
Handle locking 63–800
1)
Operating handles of all units can be locked ‘ON’ or ‘OFF’ using padlock only.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
97
6.2
Industrial switch & fusegear
Glasgow busbar chamber system
See page 157 for technical data and overall dimensions.
142BBC
Busbar chambers
Nominal unit
rating, Ie (A)
Nominal length,
mm
Eaton list
number
100550
142 BBC
900
143 BBC
1350
144 BBC
1800
146 BBC
200550
242 BBC
900
243 BBC
1350
244 BBC
1800
246 BBC
400550
442 BBC
900
443 BBC
1350
444 BBC
1800
446 BBC
630900
643 BBC
1350
644 BBC
1800
646 BBC
800900
843 BBC
1350
844 BBC
1800
846 BBC
21BBL
Busbar chamber extension sets
Nominal rating,
Ie (A)
Eaton list
number
630 800 81 BBL
81 BBL
For busbar supports, see page 158 for details
400FSCS
98
Connection sets for Glasgow fuse-switch-disconnectors & switch-disconnectors
Nominal rating,
Ie (A)
Eaton list
number
160, 200
315, 400
500, 630, 800
200 FSCS
400 FSCS
800 FSCS
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Industrial switch & fusegear
Glasgow busbar chamber system
62BBSK
6.2
Busbar clamps and sockets – 100–200A Busbars
Type
Nominal rating, Ie (A)
Bore diameter
mm
Capacity
Eaton list
mm2number
U-Clamps
20–63
63–100
100–200
–
–
–
25 70 120 2 BBCL
3 BBCL
6 BBCL
Busbar clamps and lugs connection – 400–800A Busbars
21BBMS
Type
Nominal rating, Ie (A)
Bore diameter
mm
Capacity
mm2
Eaton list
number
U-Clamps
Lugs connection
20–63
63–100
100–200
315–400
–
–
–
22.5 25 70 120 240 4 BBCL
5 BBCL
6 BBCL
82 BBSK
Description
Nominal rating, Ie (A)
Eaton list
number
Exel Switch-disconnector-fuses/ Switch-disconnectors Glasgow Fuse-switch-disconnectors/ Switch-disconnectors 20, 32
63, 100, 125
63, 100
160, 200
315, 400
500, 630, 800
11 BBMS
21 BBMS
31 BBMS
41 BBMS
51 BBMS
61 BBMS
Switchgear mounting sets
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
99
6.3
Industrial switch & fusegear
Exel 2 switch-disconnectors & switch-disconnector fuses
See page 159 for technical data and overall dimensions.
15AXTN2
Exel 2 switch-disconnector
Nominal
rating, Ie (A)
Utilisation category at
Ue 415V to BS EN 60947-3
AC22A (A)
AC23A (A)
250V DC rating Blank
Poles
to BS5419 endplate
DC23 (A)
20
20
–
201)
EP 842
11
–
32
32
–
32
22
–
63
63
–
63
EP 539
39
–
100
100
–
100
52
–
125
125
52
–
SPSN indicates switched neutral.
100KXSC2F
1)
SPSN
DP
TPN
SPSN
DP
TPN
SPSN
DP
TPN
SPSN
DP
TPN
TPN
Eaton list
number
–
15AXD2
15AXTN2
–
30AXD2
30AXTN2
–
60AXD2
60AXTN2
–
100AXD2
100AXTN2
125AXTN2
20A units are DC22.
Exel 2 switch-disconnector-fuse
Nominal
rating, Ie (A)
Utilisation category at
Ue 415V to BS EN 60947-3
AC22A (A)
AC23A (A)
250V DC rating to BS5419 (A)
Blank
endplate
fitted
Eaton
Poles
HRC fuses
DC23
Eaton list
number
2020– 201)
EP 842
20SA2
SPSN
15KXSC2F2)
DP
15KXDC2F
11–TPN
15KXTNC2F
3232– 32– 32SB3
SPSN
30KXSC2F
DP
30KXDC2F
22––
TPN
30KXTNC2F
6363– 63EP 539
63SB4
SPSN
60KXSC2F
DP
60KXDC2F
39––
TPN
60KXTNC2F
100100– 100– 100SD52)SPSN 100KXSC2F
DP
100KXDC2F
52––TPN
100KXTNC2F
12512552 – 125SD62)TPN
125KXTNC2F
SPSN indicates switched neutral.
2)
100
1)
20A units are DC22.
These units have dual fixings to accept SB3, SB4 and SO fuselinks. 2x M5 screws required
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Industrial switch & fusegear
Exel 2 switch-disconnectors & switch-disconnector fuses
PD4
6.3
Handle locking devices
• Facilities are provided for locking off operating handles
Current rating
Eaton list
(A)number
PD4
Handle locking 20–125
Exel 2 Spares
Description
Rating
Quantity required
(A)
Eaton list
number
Moving contact assembly
Switch base with arc shroud
20
1
321
631
100/1251
32
1 per pole
63
1 per pole
OLV727SP
OLV728SP
OLV725SP
OLV726SP
230AXEBSP1)
260AXEBSP1)
Combined switch/fusebase with arc shroud
Fusebase only
Arc shroud only
100/125
100/125
32
63
100/125
32
63
100/125
2100AXEBSP1)
2100AXDEBSP
230KXEBSP
260KXEBSP
100MBDEBSP
SH265SP
SH754SP
CV1109SP
1)
1 per pole
1 per pole
1 per pole
1 per pole
1 per pole
1 per pole
1 per pole
1 per pole
1 required for switched neutral pole on SPSN switchfuses.
Aerosol spray paint, Light grey to RAL7004. Eaton list number: 2AP
600MEB
Main earthing terminal bars
• Memform terminal bars are intended for the connection of circuit protective conductors, main bonding
conductors and functional earthing conductors, etc., as referred to in IEE Wiring Regulation 542-04 (BS7671)
• A bolted link facilitates testing of earthing resistance
• Manufactured from solid hard drawn copper and mounted on painted steel
supports complete with fixing holes and warning labels
• For ease of installation all terminals are captive
• Extra terminals are provided for supplementary bonding
Maximum
Size and number of terminals
incomer, Earthing
Protective Ie (A)
bonding
Overall
length
mm
Overall
width
mm
Copper thickness
mm
600
1 x M10
1000
2 x M12
1 x M8
320
32
31.75 x 6.35 600MEB
665
51
50.8 x 6.35
3 x M10
2 x M6
3 x M12
8 x M8
Eaton list
number
1000MEB
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
101
6.4
Industrial switch & fusegear
Rotary isolators & changeover switches
See pages 163-164 for technical data and overall dimensions.
xxxxx
207149-GV
Rotary isolators
• 20A to 63 A
• IP65
• Red/yellow handle
• Lockable in the 0 (Off) position
• Surface mounting
• IEC 60947-3
Rated current Iu (A)
Motor rating AC-23A, 400V, Poles
Auxiliary contact
50 - 60 Hz (kW)
Eaton List Number
20
20
20
20
25
25
32
32
32
63
63
63
63
63
6.5
6.5
6.5
6.5
13
13
13
13
13
30
30
30
22
22
207149-GV
207151-GV
207153-GV
207161-GV
226902-GV
227860-GV
207202-GV
207210-GV
207212-GV
207348-GV
207349-GV
207350-GV
207246-GV
207248-GV
3
1 NO
3+N
3+N
1 NO + 1 NC
6
1 NO + 1 NC
3
1 NO + 1 NC
3+N
3+N
1 NO + 1 NC
6
1 NO + 1 NC
8
3
1 NO + 1 NC
3+N
3+N
1 NO + 1 NC
6
1 NO + 1 NC
8
Changeover switches
• 20A to 63 A
• IP65
• Black handle
• Surface mounting
• IEC 60947-3
102
Rated current Iu (A)
Motor rating AC-23A, 400V,
Poles
50 - 60 Hz (kW)
20
32
63
6.5
13
22
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Eaton List Number
4
207136-GV
4
207191-GV
4
207230-GV
Industrial switch & fusegear
Exel – distribution fuseboards
6.5
See page 160 for technical data and overall dimensions.
304XTNC
Exel distribution fuseboards
Nominal
Poles
No. of
Max. terminal
rating, Ie (A)
ways
capacity mm2 (copper cables)
Main
Outgoing
Outgoing Suitable terminal bore HRC
diameter, mm fuselinks
Spare Safety
fuse
carrier
carrier
Eaton list
number
(without fuselinks)
IP4X enclosures
20 SPN
49564SA2
20 MFH
20 MFS
204XSNC
69564SA2
20 MFH
20 MFS
206XSNC
8120
64SA2
20 MFH
20 MFS
208XSNC
12
120
6
4
SA2
20 MFH
20 MFS
212XSNC
TPN
49564SA2
20 MFH
20 MFS
204XTNC
69564SA2
20 MFH
20 MFS
206XTNC
8120
64SA2
20 MFH
20 MFS
208XTNC
32
SPN
4
95
16
5.5
SB3
32 MFH
32 MFS
304XSNC
6
95
16
5.5
SB3
32 MFH
32 MFS
306XSNC
8
150
16
5.5
SB3
32 MFH
32 MFS
308XSNC
12
150
16
5.5
SB3
32 MFH
32 MFS
312XSNC
TPN
4
95
16
5.5
SB3
32 MFH
32 MFS
304XTNC
6
95
16
5.5
SB3
32 MFH
32 MFS
306XTNC
8
150
16
5.5
SB3
32 MFH
32 MFS
308XTNC
10
150
16
5.5
SB3
32 MFH
32 MFS
310XTNC
12
150
16
5.5
SB3
32 MFH
32 MFS
312XTNC
63
TPN
2
240
35
8
SB3 & SB4 63 MFH
63 MFS
602XTNC
4
240
35
8
SB3 & SB4 63 MFH
63 MFS
604XTNC
6
240
35
8
SB3 & SB4 63 MFH
63 MFS
606XTNC
8
240
35
8
SB3 & SB4 63 MFH
63 MFS
608XTNC
100 TPN
4 2407012SD51)
100 MFH 100 MFS
1004XTNC
65002)
7012SD51)
2)
8500 7012SD51)
2)
200
TPN4 630 150
18
SF6
100 MFH
100 MFH
200 MFH
100 MFS
100 MFS
200 MFS
1006XTNC
1008XTNC
2004XTNC
All units are supplied without fuselinks which must be ordered separately.
8LD
1)
SB3, SB4 and SO fuselinks may be fitted if used with adaptor – Eaton list number 100MFLK.
1)
Can be adapted to allow fitment of 2–240mm2 max. cable sockets with suitable copper spacing piece Eaton list number WA1212 (set of 4).
Lid locking facilities
• A choice of locking device is available
Description
Eaton list
number
Barrel lock for 20A to 100A units
Padlock bracket for 20A to 100A units
Padlock for use with above
1CLX
9LD
PD1
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
103
6.5
ETM2209SP
Industrial switch & fusegear
Exel – distribution fuseboards
Exel distribution fuseboard – spares
Description
Boards
SP outgoing ways
number
Earth bars – 20/32A fuseboards
Neutral bars – 20/32A fuseboards
104
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
–
–
–
–
–
–
–
–
up to 12
up to 18
up to 24
up to 36
up to 12
up to 18
up to 24
up to 36
Eaton list
ETM2209SP
ETM2210SP
ETM2211SP
ETM2212SP
ETM2223SP
ETM2224SP
ETM2225SP
ETM2226SP
HRC cartridge fuselinks and fuse units
7
• Options to suit every application
• Compact 415V fuselinks
• Breaking capacity of 80kA at 415V
• Motor rated fuselinks
• Compact moulded HRC fuse units
• Fully shrouded for safety
• For bolt-in & clip-in fuselinks
7.1
7.2
PARAMOUNT........................................................................................................................................................................... 106
FUSE CARRIERS & BASES....................................................................................................................................................... 112
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
105
7.1
HRC cartridge fuselinks and fuse units
Paramount
See page 161 for overall dimensions.
10SA2
415V industrial fuselinks – offset bolted contacts
• S-Type compact industrial bolted pattern fuselinks with offset contacts. ASTA 20 Certified
BS EN 60269-1 (BS88 – 1) or BS88 – 2 for a breaking capacity of 80 kA at 415V a.c.
Fixing
BS88 ref
Rating, In
Dimensional equivalents
centres, mm
Normal
Motor
GEC/Lawson
Brush/Hawker
Bussmann/
(A)
(A)Dorman
20SB3
63SB4
100SD5
106
Eaton list
number
44.5
A1 2 – NIT22F21NITD2
2SA2
4 – NIT44F21NITD4
4SA2
6 – NIT66F21NITD6
6SA2
10 –
NIT1010F21NITD10
10SA2
16 –
NIT1616F21NITD16
16SA2
20 –
NIT2020F21NITD20
20SA2
25
NIT20M2520M25F21NITD20M25
20SA2M25
32
NIT20M3220M32F21NITD20M32
20SA2M32
–
25 –
NIT2525F21NITD25
25SA2
32 –
NIT3232F21NITD32
32SA2
40
NIT32M40
–NITD32M40
32SA2M40
50
NIT32M50
–NITD32M50
32SA2M50
63
NIT32M63
–NITD32M63
32SA2M63
73
A2 2
–
TIA2 2HO7AAO22SB3
4
–
TIA4 4HO7AAO44SB3
6
–
TIA6 6HO7AAO66SB3
10
–
TIA10 10HO7AAO1010SB3
16
–
TIA16 16HO7AAO1616SB3
20
–
TIA20 20HO7AAO2020SB3
25
–
TIA25 25HO7AAO2525SB3
32
–
TIA32 32HO7AAO3232SB3
40
TIA32M40
32M40HO7
AAO32M40
32SB3M40
50
TIA32M50
32M50HO7
AAO32M50
32SB3M50
63
TIA32M63
32M63HO7
AAO32M63
32SB3M63
A335–TIS35
––35SB4
40
–
TIS40 40KO7BAO4040SB4
50
–
TIS50 50KO7BAO5050SB4
63
–
TIS63 63KO7BAO6363SB4
80
TIS63M80
63M80KO7
BAO63M80
63SB4M80
100
TIS63M100
63M100KO7
BAO63M100
63SB4M100
–80–OS80/TIS80
80KO7R
OSD80
80SO
100
–
OS100/TIS100100KO7R
OSD100
100SO
125
OS100M125/
–OSD100M125
100SOM125
TIS100M125
160
––OSD100M160
100SOM160
125
–OOT125
––125S0
160
–00T160
––160SO
200
––––200SO
94
A4 32 –
TCP3232L14 CEO3532SD5
40 –
TCP4040L14 CEO4040SD5
50 –
TCP5050L14 CEO5050SD5
63 –
TCP6363L14 CEO6363SD5
80 –
TCP8080L14 CEO8080SD5
100 –
TCP100100L14 CEO100100SD5
125
TCP100M125
100M125L14
CEO100M125
100SD5M125
160
TCP100M160
100M160L14
CEO100M160
100SD5M160
200
TCP100M200
100M200L14
CEO100M200
100SD5M200
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
HRC cartridge fuselinks and fuse units
Paramount
7.1
415V industrial fuselinks – offset bolted contacts (contd)
Fixing
BS88 ref
Rating, In
Dimensional equivalents
centres, mm
Normal
Motor
GEC/Lawson
Brush/Hawker
Bussmann/
(A)
(A)Dorman
Eaton list
number
–125
–TFP125
125M14
DEO125
125SD6
160
–
TFP160 160M14DEO160 160SD6
200
–
TFP200 200M14DEO200 200SD6
250
TFP200M250
200M250M14
DEO200M250
200SD6M250
315
–––200SD6M315
These industrial bolted pattern fuselinks are of two types – with offset contacts of ratings 2–200A and with centre contacts of ratings 2–1250A.
They are available to BS references A1 to A4, B1 to B4, C1 to C3, D1 and in certain other sizes.
20SE3
415V industrial fuselinks – centre bolted contacts
• S-Type compact industrial bolted pattern fuselinks with centre contacts. ASTA 20 Certified or
tested to BS EN 60269-1 (BS88-1) or BS88-2 for a breaking capacity of 80 kA at 415V a.c.
Fixing
BS88 ref
centres, mm
32SF3
200SF6
Rating In
Normal (A)
Motor
Dimensional equivalents
Eaton list
GEC/Lawson
Brush/Hawker
Bussmann/Dorman number
97 –2–TB2
2KO8
AC2
2SE3
4
– TB4 4KO8AC4 4SE3
6
– TB6 6KO8AC6 6SE3
10
–
TB10 10KO8AC10 10SE3
16
–
TB16 16KO8AC16 16SE3
20
–
TB20 20KO8AC20 20SE3
25
–
TB25 25KO8AC25 25SE3
32
–
TB32 32KO8AC32 32SE3
111 –2–TBC2
2KO9
AD2
2SF3
4
– TBC44KO9AD4 4SF3
6
– TBC66KO9AD6 6SF3
10
–
TBC1010KO9AD10 10SF3
16
–
TBC1616KO9AD16 16SF3
20
–
TBC2020KO9AD20 20SF3
25
–
TBC2525KO9AD25 25SF3
32
–
TBC3232KO9AD32 32SF3
97 –40–TB40
40KO8
BC40
40SE4
50
–
TB50 50KO8BC50 50SE4
63
–
TB63 63KO8BC63 63SE4
97 –6380–––63SE4M80
100
–––63SE4M100
111
B1 40
–
TBC4040KO9BD40 40SF4
50
–
TBC5050KO9BD50 50SF4
63
–
TBC6363KO9BD63 63SF4
80–––63SF4M80
100
–––63SF4M100
80 –
TC80 80LO9CD80 80SF5
100 –
TC100 100LO9CD100 100SF5
125
TC100M125
100M125LO9
CD100M125
100SF5M125
160
TC100M160
100M160LO9
CD100M160
100SF5M160
200
TC100M200
100M200LO9
CD100M200
100SF5M200
B2
125
–
TF125 125MO9DD125 125SF6
160
–
TF160 160MO9DD160 160SF6
200
–
TF200 200MO9DD200 200SF6
250
TF200M250
200M250M09
DD200M250
200SF6M250
315
–––200SF6M315
B3
250
–
TKF250 250NO9ED250 250SF7
315
–
TKF315 315NO9ED315 315SF7
400
–––315SF7M400
133 –250
–TKM250
250N11
EFS250
250SG7
315
–
TKM315315N11 EFS315 315SG7
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
107
7.1
400SH8
HRC cartridge fuselinks and fuse units
Paramount
415V industrial fuselinks – centre bolted contacts (contd)
Fixing
BS88 ref
centres, mm
630SY9
1250SJ11
20SN2
Rating In
Normal (A)
Motor (A)
Dimensional equivalents
Eaton list
GEC/Lawson
Brush/Hawker
Bussmann/Dorman number
111
B4
355
–
TMF355355PO9 ED355 355SF8
400
–
TMF400400PO9 ED400 400SF8
500
TMF400M500
–ED400M500
400SF8M500
133/184 C1
355 –
TM355 355P11EF355 355SH8
400 –
TM400 400P11EF400 400SH8
133/184 C2
450
–
TTM450450R11 FF450 450SH9
500
–
TTM500500R11 FF500 500SH9
560
–
TTM560560R11 FF560 560SH9
630
–
TTM630630R11 FF630 630SH9
165/229
–450
–TT450
450R12
FG450
450SY9
500 –
TT500 500R12FG500 500SY9
630 –
TT630 630R12GG630 630SY9
133/184 C3
710
–
TLM710700S11 GF710 710SH10
800
–
TLM800800S11 GF800 800SH10
165/229
–710
–TLT710
700S12
GG700
710SY10
800 –
TLT800 800S12GG800 800SY10
149
D1
1000
–
TXU10001000U44GH1000 1000SJ11
1250
–
TXU12501250U44GH1250 1250SJ11
SN type offset blade fuselinks
• ASTA 20 Certified or tested to BS EN 60269-1 (BS88-1) and BS88-6 for a breaking capacity
of 80 kA at 415V a.c. For use in industrial and commercial installations.
Overall
Overall
Rating InEquivalentsEaton list
length, mm
dia. mm
Normal (A)
Motor (A)
GEC/Lawson
Brush/Hawker
Bussmann/Dorman number
60
14 2 – NS2 2FO6NSD22SN2
4 – NS4 4FO6NSD44SN2
6 – NS6 6FO6NSD66SN2
10 –
NS10 10FO6NSD1010SN2
16 –
NS16 16FO6NSD1616SN2
20 –
NS20 20FO6NSD2020SN2
25
NS20M25
20M25FO6
NSD20M25
20SN2M25
32
NS20M32
20M32FO6
NSD20M32
20SN2M32
25 –
NS25 25FO6NSD2525SN2
32 –
NS32 32FO6NSD3232SN2
58 17.5
3240NS32M40
– NSD32M40
32SN2M40
50
NS32M50
–NSD32M50
32SN2M50
63
NS32M63
–NSD32M63
32SN2M63
108
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
HRC cartridge fuselinks and fuse units
Paramount
63SP
7.1
SP type offset blade fuselinks
• ASTA 20 Certified to BS EN 60269-1 (BS88 – 1) and BS88 – 6 for a breaking capacity
of 80 kA at 415V a.c. For use in industrial and commercial installations.
Overall
Overall
Rating InEquivalentsEaton list
length, mm
dia. mm
(A)
GEC/Lawson
Brush/Hawker
Bussmann/Dorman number
68 1716 – – ESD16
16SP
20 ––ESD20
20SP
25 ––ESD25
25SP
32 ––ESD32
32SP
4040ES
40GO5
ESD40
40SP
5050ES
50GO5
ESD50
50SP
6363ES
63GO5
ESD63
63SP
604R
R and RL type house service cut-out fuselinks
• Type IIa (R) and IIb (RL) house service cut-out fuselinks. ASTA 20 Certified or tested to BS88-3 for a breaking capacity
of 33 kA at 415V a.c. For use in domestic and commercial installations mainly in supply authorities cut-outs.
Overall
Overall
Rating, InEquivalentsEaton list
length, mm
dia. mm
Normal (A)
GEC/Lawson
Brush/Hawker
Bussmann/Dorman number
57
22.23 15
RHF15 15KR85–
154R
20RHF20
20KR85
–204R
30RHF30
30KR85
RHD30
304R
40RHF40
40KR85
RHD40
404R
45–
45KR85
–454R
50RHF50
50KR85
RHD50
504R
60RHF60
60KR85
RHD60
604R
80RHF80
80KR85
RHD80
804R
100–
100KR85
–1004R
57 3030 RHL30
30LR85
RHLD30
304RL
60RHL60
60LR85
RHLD60
604RL
80RHL80
80LR85
RHLD80
804RL
100RHL100
100LR85
RHLD100
1004RL
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
109
7.1
6LS
HRC cartridge fuselinks and fuse units
Paramount
LS type street lighting fuselinks
• ASTA 20 Certified to BS EN 60269-1 (BS88-1) for a breaking capacity of 50kA at 240V a.c.
Also compies with BS7654 for use in street ligting cut-out.
Fixing
centres, mm
OverallOverallRating, In
Equivalents1)Eaton list
length, mm
dia. mm
(A)
GEC
Brush
Dorman/Bussmann number
LS-Type, offset contacts
38 47142 LST2
2D19L
STD2
2LS
4LST4
4D19L
STD4
4LS
6LST6
6D19L
STD6
6LS
10
LST10
10D19L
STD10
10LS
16
LST16
16D19L
STD16
16LS
20
LST20
20D19L
STD20
20LS
25
LST25
25D19L
STD25
25LS
32
LST32
32D19L
STD32
32LS
1)
Equivalent columns list fuselinks having similar ratings and fixing centres.
20SS
SS type offset blade fuselinks
• ASTA 20 Certified to BS EN 60269-1 (BS88-1) for a breaking capacity of 50kA at 240V a.c.
Also compies with BS7654 for use in street ligting cut-out.
Fixing
centres, mm
OverallOverallRating, Equivalents1)Eaton list
length, mm
dia. mm
In (A)
GEC
Brush
Dorman/Bussmann number
–
51122 SS2
2DO4
SSD2
2SS
4SS4
4DO4
SSD4
4SS
6SS6
6DO4
SSD6
6SS
10
SS10
10DO4
SSD10
10SS
16
SS16
16DO4
SSD15
16SS
20
SS20
20DO4
SSD20
20SS
25
SS25
25DO4
SSD25
25SS
32
SS32
32DO4
SSD32
32SS
1)
Equivalent columns list fuselinks having similar ratings and fixing centres.
110
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
HRC cartridge fuselinks and fuse units
Paramount
315JCS82
7.1
J type feeder pillar fuselinks
• ASTA 20 Certified or tested to BS88 – 2 (formerly BS88: Part 5) for a breaking capacity of 80 kA at 415V a.c.
• Available in standard 82mm and 92mm fixing centres up to 400A and 800A respectively for wedge
tightening contacts. Also available in ferrule form up to 250A for pole mounted cut-outs.
• For use by the Electricity Supply Industry in distribution systems.
• Available with silver elements, details on request.
Fixing
EquivalentsRating, Eaton list
centres, mm
Fluvent
Lawson
SIBA
GEC
EMP
Dorman
Bussmann/ In (A)
number
Brush
400JCS92
82
DL2-2
JPU5002301
JP 2/EJA
JPDMJ30
63 63JCS82
80
80JCS82
100
100JCS82
125
125JCS82
160
160JCS82
200
200JCS82
250
250JCS82
315
315JCS82
PJ30
355
355JCS82
400
400JCS82
92
DL3-2
JSU5002601
JS 3/EJB
JSDMJ31
63 63JCS92
80
80JCS92
100
100JCS92
125
125JCS92
160
160JCS92
200
200JCS92
250
250JCS92
315
315JSC92
PJ31
355
355JCS92
400
400JCS92
RJ31
450
450JCS92
500
500JCS92
SJ31
560
560JCS92
630
630JCS92
710
710JCS92
800
800JCS92
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
111
7.2
HRC cartridge fuselinks and fuse units
Fuse carriers and bases
See page 162 for overall dimensions.
3SCHF
Fuse carriers
Nominal
rating Ie (A)
Fuse type fitted
Eaton list number
HRC Fuse Carrier
1010SA2
1 SCHF
2020SA2
2 SCHF
3232SB3
3 SCHF
6363SB4
6 SCHF
100SD5
100SCHF
100
20MFA
Complete fuse units (carriers and bases) – bolt-in type A (front/busbar)
Nominal
Colour
Neutral link
rating, In (A)
20
32
63
100
Suitable Eaton
HRC fuselinks
20MLK2-20SA2
32MLK2-32SB3
63MLK
35-63SB4 or 2-32SB3
100MLK32-100SD51)
1)
SB3, SB4 or SO fuselinks may be fi tted if used with adaptor – Eaton list number: 100MFLK.
32MFB
Black
Black
Black
Black
Eaton list
number
20MFA
32MFA
63MFA
100MFA
Complete fuse units (carriers and bases) – bolt-in type B (front/front)
Nominal
Colour
Neutral link
rating, In (A)
Suitable Eaton HRC fuselinks
Eaton list
number
20
Black 20MLK2-20SA2
20MFB
32
Black 32MLK2-32SB3
32MFB
63
Black
63MLK
35-63SB4 or 2-32SB3
63MFB
100
Black 100MLK32-100SD51)
100MFB
Compact range
32
Black 20MLK2-32SA2
32CMFB
63
Black
32MLK
35-63SB4 or 2-32SB3
63CMFB
100
Black
63MLK
80-100SO or 35-63SB4
100CMFB
200
Black
100MLK
125-200SD6 or 32-100SD5
200CMFB
1)
SB3, SB4 or SO fuselinks may be fitted if used with adaptor – Eaton list number: 100MFLK.
63MFC
Complete fuse units (carriers and bases) – bolt-in type C (back/back)
Nominal
Colour
rating, In (A)
Suitable Eaton HRC fuselinks
20
Black 20MLK2-20SA2
63
Black
63MLK
35-63SB4 or 2-32SB3
100
Black 100MLK32-100SD51)
Compact range
100
Black
63MLK
80-100SO or 35-63SB4
1)
SB3, SB4 or SO fuselinks may be fitted if used with adaptor – Eaton list number: 100MFLK.
112
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Eaton list
number
20MFC
63MFC
100MFC
100CMFC
HRC cartridge fuselinks and fuse units
Fuse carriers and bases
63MFD
Complete fuse units (carriers and bases) – bolt-in type D (front/back)
Nominal
Colour
Neutral link
rating, In (A)
32
63
32CFF
7.2
Suitable Eaton HRC fuselinks
Black 32MLK2-32SB3
Black
63MLK
35-63SB4 or 2-32SB3
Eaton list
number
32MFD
63MFD
Complete fuse units (carriers and bases) –clip-in type
Nominal
Colour
Suitable Eaton HRC fuselinks
Eaton list
rating, In (A)number
Front/Front
32
Black
2-32SN2
32CFF
White2-32SN232CFFW
63
Black
16-63SP
63CFF
White16-63SP63CFFW
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
113
114
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Enclosed motor, heating and lighting control
8
Since the late 1920’s we have built countless
motor starters, fitted and trusted by generations of
contractors, while the increasing requirements of
our markets have led us to constantly update and
expand our ADS range to allow for an increased
choice of current ratings and ingress protection.
This wealth of experience and expertise in the
design and manufacture of Motor Control Gear is
mirrored by our Heating and Lighting range which
offers a versatile and comprehensive choice.
8.1
8.2
8.3
ADS8 AC CONTACTORS, STARTERS AND ASSEMBLIES...................................................................................................... 116
PUSHBUTTON CONTROL UNITS – MSU ............................................................................................................................... 118
AUTOLINE HEATING AND LIGHTING CONTACTORS............................................................................................................ 119
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
115
8.1
Enclosed motor, heating and lighting control
ADS8 AC contactors, starters and assemblies
This chapter covers the ADS8 range of DOL, DOL Reversing and
Star Delta starters with associated overload relays. Overload
relays are supplied separately and enclosures are IP54 metal clad.
A higher rated IP65 moulded 9kW DOL starter is also available.
See page 117 for overload relays.
See page 176 for trip and electrical life curves.
See page 166 for dimensional drawings.
• IEC / EN60947-4
28ADSM1X
9kW DOL starter without switch disconnect
• IP 65 moulded surface mounting enclosure, less overload relay
Maximum current rating (AC3) A
Maximum kW rating AC3
415v 3ph
189
28ADS2X
Control coil voltage 50Hz
Vac
Eaton list
number
220–240
28ADSM1X
380–415
48ADSM1X
11kW DOL starter without switch disconnect
• IP 54 metalclad surface mounting enclosure, less overload relay
Maximum current rating (AC3) A
Maximum kW rating AC3
415v 3ph
189
2511
28ADSA1X
Control coil voltage 50Hz
Vac
Eaton list
number
220–240
28ADS1X
380–415
48ADS1X
220–240
28ADS2X
380–415
48ADS2X
11kW DOL starter with switch disconnect
• IP 54 metalclad surface mounting enclosure, less overload relay
Maximum current rating (AC3) A
Maximum kW rating AC3
415v 3ph
189
2511
48ARD1X
Control coil voltage 50Hz
Vac
Eaton list
number
220–240
28ADSA1X
380–415
48ADSA1X
220–240
28ADSA2X
380–415
48ADSA2X
11kW DOL Reversing starter without switch disconnect
• IP 54 metalclad surface mounting enclosure, less overload relay
Maximum current rating (AC3) A
Maximum kW rating AC3
415v 3ph
18
9
25
11
116
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Control coil voltage 50Hz
Vac
Eaton list
number
220–240 380–415 220–240 380–415 28ARD1X
48ARD1X
28ARD2X
48ARD2X
Enclosed motor, heating and lighting control
ADS8 AC contactors, starters and assemblies
28SDA2X18
8.1
22kW Star Delta starter without switch disconnect
• IP 54 metalclad surface mounting enclosure, less overload relay
Maximum current rating (AC3) A
Maximum kW rating AC3
415v 3ph
Control coil voltage 50Hz
Vac
3115
4322
8TT92
8TT92SD
Eaton list
number
220–240
28SDA2X18
380–415
48SDA2X18
220–240
28SDA3X25
380–415
48SDA3X25
DOL, DOL reversing, line connected thermal overload relays
Full load current
Motor rating
AkW
Eaton list
number
0.63–10.37
1–1.60.55
1.6–2.51.1
2.5–41.5
4–62.2
5.5–83.7
7–104
10–135.5
13–189
18–2511
8TT87
8TT88
8TT89
8TT90
8TT91
8TT98
8TT92
8TT93
8TT94
8TT104
Star Delta, phase connected thermal overload relays
Full load current
Motor rating
AkW
Eaton list
number
4.3–6.93
6.9–10.45.5
9.5–13.87
12.1–17.39
17.3–22.511
22.5–3115
31–4322
8TT90SD
8TT91SD
8TT98SD
8TT92SD
8TT93SD
8TT94SD
8TT104SD
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
117
8.2
Enclosed motor, heating and lighting control
Pushbutton control units
This chapter covers the moulded IP66
pushbutton control units – type MSU
• IEC / EN60947-4
• Surface mounting
See page 179 for overall dimensions.
M22MSU
MSU pushbutton control units (moulded IP66)
Number
Description
Contacts
Button Colour
Cover Colour
buttons
1
1
1
1
1
1
2
2
3
1)
118
Eaton List Number
Start control
1 N/O, 1 N/C
Green
Light Grey
M21MSSU
Stop control
1 N/O, 1 N/C
Red
Yellow
M21MSU
Key selector switch, 2 position, 0/1
1 N/O
Black
Light Grey
M21MSU2K
Key selector switch, 2 position, 0/1, spring return
1 N/O, 1 N/C
Black
Light Grey
M21MSU2SK
Mushroom head, push to latch, key release
1 N/C
Red
Light Grey
M21MSULK
Stop control, mushroom head, push to latch, 1 N/O, 1 N/C
Red
Yellow
M21MSUML
turn to release
2-way, start / stop
1 N/O, 1 N/C (each button)
Green / red
Light Grey
M22MSU
2-way, start / stop mushroom head, push to latch,
1 N/O, 1 N/C (each button)
Green / red
Light Grey
M22MSUL turn to release
3-way, up / down / stop mushroom head, push to latch,
1 N/O, 1 N/C (each button)
Black / black / red
Light Grey M23MSUL1) turn to release
M23MSUL units are supplied with 2 sets of button legends, FORWARD, REVERSE, and UP, DOWN to be clipped on the buttons as required.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Enclosed motor, heating and lighting control
Autoline heating and lighting contactors
This chapter covers the range of Autoline heating and lighting
contactors, in 1 pole, 2 pole and 4 pole configuration, with ratings
at AC1 and AC5a. Metalclad enclosures have an IP55 rating.
8.3
See page 174 for overall dimensions.
• IEC / EN60947-4
•IEC408
248ALCFP
Heating and lighting contactors
Description
Cable
Coil voltage
capacity
50 Hz
2
mm Heating and general Lighting load,
mixed loads, amps per pole
slightly inductive, AC5a
amps per pole AC1
Eaton list
number
4P enclosed without rectifier
4P enclosed without rectifier
4P enclosed without rectifier
4P enclosed without rectifier
4P enclosed with rectifier
4P enclosed with rectifier
2P enclosed without rectifier
2P enclosed without rectifier
2P enclosed with rectifier
2P enclosed with rectifier
1P enclosed without rectifier
1P enclosed without rectifier
1P enclosed with rectifier
1P enclosed with rectifier
25
25
40
40
25
40
40
64
40
64
70
112
70
112
228ALCFP
248ALCFP
428ALCFP
448ALCFP
228ALCFPR
428ALCFPR
228ALCDP
428ALCDP
228ALCDPR
428ALCDPR
228ALCSPN
428ALCSPN
228ALCSPNR
428ALCSPNR
4
4
10
10
4
10
16
25
16
25
50
50
50
50
220–240
380–415
220–240
380–415
220–240
220–240
220–240
220–240
220–240
220–240
220–240
220–240
220–240
220–240
12
12
32
32
12
32
25
40
25
40
50
50
50
50
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
119
120
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Power factor correction capacitors
9
Eaton’s power factor correction products are available
in three types. The economical non-auto low voltage
capacitors are an ideal choice for use in electrical
installations where the total load changes very little from
hour to hour and day to day. For installations where
the load is more variable, Eaton offers 100 standard
and 300 standard and de-tuned products, which
constantly monitor the power factor of the installation
and automatically adjust the correction so that it
accurately matches the instantaneous requirements.
9
Eaton capacitors non-auto range............................................................................................................................................... 122
Eaton capacitors 100 auto......................................................................................................................................................... 122
Eaton capacitors 300 – standard............................................................................................................................................... 122
Eaton capacitors 300 – detuned................................................................................................................................................ 123
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
121
9
EP2541E
MC25M1
Power factor correction capacitors
Non-auto, 100 auto and 300 standard
Eaton capacitors non-auto
KVAR
(415V)
TerminalTerminalEarth studWeight Eaton list
sizectr’ssize(Kg)number
25
50
75
100
M835
M835
M1060
M1060
M86
M88
M1016
M1018
EP2541E
EP5041E
EP7541E
EP10041E
Eaton capacitors 100 auto
KVAR
Stages
(415V)
Weight
Incoming
(Kg)device
25
1 x 25
20
Fusebase
21Fuseswitch
MCCB 50
2 x 25
25
Fusebase
26Fuseswitch
MCCB 75
3 x 25
31
Fusebase
33Fuseswitch
MCCB 100
4 x 25
35
Fusebase
37Fuseswitch
MCCB Eaton list
number
MC25M1
MC25M1S
MC25M1M
MC50M2
MC50M2S
MC50M2M
MC75M3
MC75M3S
MC75M3M
MC100M4
MC100M4S
MC100M4M
If you require a specific KVAR rating other than the above, please contact Eaton for further details.
MC25M5
Eaton capacitors 300 standard
KVAR
Stages
(415V)
Weight
Incoming
(Kg)device
Eaton list
number
125
5 x 25
210
Direct connection
MC125M5
Fuseswitch
MC125M5S
MCCB MC125M5M
150
3 x 50
235
Direct connection
MC150M3
Fuseswitch
MC150M3S
MCCB MC150M3M
175
3 ×50 + 1 × 25
245
Direct connection
MC175M4
Fuseswitch
MC175M4S
MCCB MC175M4M
200
4 x 50
260
Direct connection
MC200M4
Fuseswitch
MC200M4S
MCCB MC200M4M
225
4 ×50 + 1 × 25
270
Direct connection
MC225M5
Fuseswitch
MC225M5S
MCCB MC225M5M
250
5 x 50
280
Direct connection
MC250M5
Fuseswitch
MC250M5S
MCCB MC250M5M
275
5 ×50 + 1 × 25
290
Direct connection
MC275M6
Fuseswitch
MC275M6S
MCCB MC275M6M
300
6 x 50
300
Direct connection MC300M6
Fuseswitch MC300M6S
MCCB MC300M6M
Applications above 300KVAR are also available, please contact Eaton for further details.
122
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
9
Power factor correction capacitors
300 detuned
MC100M2DT
Eaton capacitors 300 detuned
KVAR
Stages
(415V)
Weight
Incoming
(Kg)device
Eaton list
number
100
2 x 50
230
Direct connection
MC100M2DT
Fuseswitch
MC100M2SDT
MCCB MC100M2MDT
125
2 x 50 + 1 x 25
240
Direct connection
MC125M3DT
Fuseswitch
MC125M3SDT
MCCB MC125M3MDT
150
3 x 50
260
Direct connection
MC150M3DT
Fuseswitch
MC150M3SDT
MCCB MC150M3MDT
175
3 x 50 + 1 x 25
400
Direct connection
MC175M4DT
Fuseswitch
MC175M4SDT
MCCB MC175M4MDT
200
4 x 50
420
Direct connection MC200M4DT
Fuseswitch MC200M4SDT
MCCB MC200M4MDT
225
4 x 50 + 1 x 25
430
Direct connection
MC225M5DT
Fuseswitch
MC225M5SDT
MCCB MC225M5MDT
250
5 x 50
440
Direct connection
MC250M5DT
Fuseswitch
MC250M5SDT
MCCB MC250M5MDT
275
5 x 50 + 1 x 25
450
Direct connection
MC275M6DT
Fuseswitch
MC275M6SDT
MCCB MC275M6MDT
300
6 x 50
470
Direct connection MC300M6DT
Fuseswitch MC300M6SDT
MCCB MC300M6MDT
325
6 x 50 + 1 x 25
480
Direct connection
MC325M7DT
Fuseswitch
MC325M7SDT
MCCB MC325M7MDT
350
7 x 50
500
Direct connection
MC350M7DT
Fuseswitch
MC350M7SDT
MCCB MC350M7MDT
375
7 x 50 + 1 x 25
510
Direct connection
MC375M8DT
Fuseswitch
MC375M8SDT
MCCB MC375M8MDT
400
8 x 50
530
Direct connection MC400M8DT
Fuseswitch MC400M8SDT
MCCB MC400M8MDT
425
8 x 50 + 1 x 25
540
Direct connection
MC425M9DT
MCCB MC425M9MDT
450
9 x 50
560
Direct connection
MC450M9DT
MCCB MC450M9MDT
475
9 x 50 + 1 x 25
700
Direct connection
MC475M10DT
MCCB MC475M10MDT
500
10 x 50
720
Direct connection MC500M10DT
MCCB MC500M10MDT
525
10 x 50 + 1 x 25 730
Direct connection MC525M11DT
MCCB MC525M11MDT
550
11 x 50
750
Direct connection MC550M11DT
MCCB MC550M11MDT
575
11 x 50 + 1 x 25 760
Direct connection MC575M12DT
MCCB MC575M12MDT
600
12 x 50
780
Direct connection MC600M12DT
MCCB MC600M12MDT
Applications above 600KVAR are also available. Applications above 400KVAR are also available with an ACB as the protective device
Please contact Eaton for further details.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
123
124
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
10
10.1
MEMSHIELD 3 TYPE A SPN, TYPE B TPN DISTRIBUTION BOARDS .................................................................................... 126
SPLIT METERED POWER AND LIGHTING BOARD – 200A TPN, MEMSHIELD 3 METER PACK ASSEMBLIES ................. 128
MEMSHIELD 3 TYPE A SPN, TYPE B TPN PAN ASSEMBLIES .............................................................................................. 129
SURGE PROTECTION DEVICES ............................................................................................................................................. 131
METER PACK ASSEMBLIES ................................................................................................................................................... 132
18MM MINIATURE CIRCUIT BREAKERS (MCBS) ................................................................................................................. 134
27MM MINIATURE CIRCUIT BREAKERS (FOR 250A HIGH LOAD DISTRIBUTION BOARDS) ........................................... 136
RESIDUAL CURRENT CIRCUIT BREAKERS (RCCBS) ........................................................................................................... 137
RESIDUAL CURRENT CIRCUIT BREAKERS – WITH OVERLOAD (RCBOS) ......................................................................... 138
CONTROL AND SWITCHING DEVICES DIMENSIONS AND DATA ...................................................................................... 139
EARTH LEAKAGE RELAYS AND CTS ..................................................................................................................................... 147
10.2
MCCBS, MAX ZS (OHMS) FIGURES ..................................................................................................................................... 148
PANELBOARD DIMENSIONAL DRAWINGS .......................................................................................................................... 149
PANELBOARD MULTIFUNCTION METER, TECHNICAL CHARACTERISTICS AND SPECIFICATION ................................. 152
MCCB PAN ASSEMBLIES, DIMENSIONS............................................................................................................................... 153
10.3
10.4
10.5
ENCLOSED SWITCH & FUSEGEAR......................................................................................................................................... 155
Glasgow fuse-switch-disconnectors & switch-disconnectors.................................................................................................... 155
Glasgow busbar chamber system.............................................................................................................................................. 157
Exel 2 switch-disconnectors & switch-disconnector fuses......................................................................................................... 159
Exel distribution fuseboards....................................................................................................................................................... 160
HRC cartridge fuselinks, carriers and bases............................................................................................................................... 161
Rotary isolators........................................................................................................................................................................... 163
ADS8 AND AUTOLINE AC CONTACTORS, STARTERS AND ASSEMBLIES........................................................................... 165
PUSHBUTTON CONTROL UNITS – MSU................................................................................................................................ 179
POWER FACTOR CORRECTION CAPACITORS........................................................................................................................ 180
DEGREES OF PROTECTION – IP.............................................................................................................................................. 184
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
125
10.1
Technical data
Memshield 3 type A SPN, type B TPN distribution boards
Distribution boards type A and type B, technical overview
Type A
Type B
IP Rating
Enclosure body type
Paint specification
Conditional short circuit rating
Busbar short time withstand (Icw) Cable Capacities
125A switch disconnector
100A RCCB (type A = 90A)
250A switch disconnector
160A – 250A MCCB incomer
100A direct connection kit
250A direct connection lugs
125A contactor incomer
250A contactor incomer
Enclosure earth stud
Incoming earth terminal
Incomming neutral terminal
Outgoing earth terminal
Outgoing neutral terminal
IP3X
Steel – welded case end with cable glad plate
RAL 7004 epoxy polyester
15kA to BS EN 61439
5kA 0.1s
IP4X
Steel – welded case end with cable glad plate
RAL 7004 epoxy polyester
25kA to BS EN 61439
10kA 0.5s / 17kA 0.25s
50mm250mm2
35mm250mm2
–
120mm2 (+ M8 lugs)
–
250A = 120mm2 (+ M8 lugs)
35mm2–
–
120mm2 (+ M8 lugs)
–
50mm2
–
120mm2 (+ M8 lugs)
M6
M8
25mm2
125A = 25mm2, 250A = 70mm2
90/100A = 35mm2, 125A = 50mm2
125A = 50mm2, 250A = 120mm2 (+ M8 lugs)
25mm225mm2
25mm225mm2
Type 1/type 2 combined lightning/surge arrester, technical data
Electrical
EM3SSK3T12 & EMSSK3T12L
EM3SSK3T12P
Lightning protection system class
III, IV
I, II, III, IV
Responding time (rate of voltage rise 5 kV/µs)
L-N/ N-PE
< 25 ns / < 100 ns
< 25 ns
Voltage protection level Up
L-N/L-PE / N-PE
< 1.5kV
1.5 kV
Maximum continuous operating voltage UC L-N/N-PE
280 VAC/255 VAC
440 VAC / 260 VAC
Temporary overvoltage test value UT (5 s) L-N/L-PE
348 VAC/370 VAC
(200 ms) N-PE
1200 VAC
200 VAC (200 ms)
Rated frequency
50/60 Hz
50/60 Hz
Discharge current (8/20) µs Imax/In
–
100 kA
Open circuit voltage Uoc
20 kV
–
Nominal discharge current (8/20) µs In
L-N/N-PE
3x25 kA/100 kA
–
Maximum discharge current Imax
L-N/N-PE
3x50 kA/100 kA
–
Impulse current Iimp (10/350) µs:
Peak current
L-N/N-PE
3x12.5 kA/100 kA
100 kA
Charge Q 50 As
50 As
Specific energy 2500 kJ/Ω
2500 kJ/Ω
Follow current interrupt rating Ifi
N-PE 100 Ar.m.s–
at 260 V
L-(PE)N/N-PE
–
3kArms/100Arms
at 440 V
L-(PE)N/N-PE
–
1,5kArms/–
Short-circuit current strength at max. back-up fuse
–
25kArms
Maximum back-up fuse
160 AgL/gG
125 AgL
Maximum short-circuit current
50 kAr.m.s–
Type 2 surge arrester technical data
ElectricalEM3SSK1T2
EM3SSK3T2
Responding time (rate of voltage rise 5 kV/µs)
L-N/N-PE/L-PE < 25ns/< 100ns/< 100ns Maximum continuous operating voltage UCL-N/N-PE 335VAC/260VAC
Temporary overvoltage test value UT (5 s)
L-N
415 VAC
(200 ms)
N-PE
1200 VAC
Rated frequency
50/60 Hz
Nominal discharge current In
L-N/N-PE/L-PE
20 kA (8/20)µs
Voltage protection level Up at InL-N/N-PE/L-PE
≤1600V/≤1000V/≤1650V
Maximum discharge current Imax
L-N/N-PE/L-PE
40 kA (8/20)µs
< 25ns/< 100ns/< 100ns
280VAC/260VAC
350 VAC
1200 VAC
50/60 Hz
20 kA (8/20)µs
≤1000V/≤1000V/≤1300V
40 kA (8/20)µs
126
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
10.1
Technical data
Memshield 3 type A SPN, type B TPN distribution boards
Memshield 3 type A SPN Distribution Board,
dimensional drawing
Memshield 3 type B TPN Distribution Board,
dimensional drawing
10
100
326
10
130
130
100
M6 Keyhole
fixing
440
83
A
Cable
terminations
37.6
A
B
161
254
C
=
B
M6 KEYHOLE FIXINGS
=
List No.
A (mm)
EAM4, EBMXDC6
EAMMP65
EAM7, EBMXDC9
EAM10
EAM13, EBMXDC15, EBMXDCG15
EAM9M/MB
EAM16, EBMXDC18
EAM12M/MB
EAMSL66M/MB
EAMSL93M/MB
238
163
238163
292
217
346271
440
365
440365
454
379
454379
454379
454379
180
or
250
B (mm)
270
List No. A (mm) B (mm)
C (mm)
125A250ALugs
incomerincomerincomer
EBM41
429245144–
EBM61
482
298
144
–
EBM81, EBMXDC30
564380173–
EBM121, EBM121D, EBMXDC45 724540227–
EBM161
830540227–
EBM122
86167733476
EBM182
1021
837
334
76
EBM242
1180
996
334
76
250A high load boards1)
EBM22H
817
633
–
237
EBM62H
1020
836
–
296
EBM82H
1055
871
–
277
EBM122H
1180
996
–
296
EBM182H
1342
1158
–
298
EBM242H
1501
1317
–
298
1)
Cable Box
(if fitted)
150
150
179
233
233
340
340
340
500
559
540
559
561
561
Cable box not required
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
127
10.1
Technical data
Split metered power and lighting board – 200A TPN
Split metered power and lighting board –
200A TPN, dimensional drawing
326
10
130
100
M6 Keyhole
fixing
440
83
B
A
270
List No.
A (mm)
EBMSL642MPMB1130
EBMSL862MPMB1236
EBMSL1082MPMB1342
EBMSL14102MPMB1501
128
B (mm)
946
1052
1158
1317
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Memshield 3 type A SPN pan assemblies
10.1
List No. Dimensions (mm)Minimum
recommended
abcdef ghj enclosure size (mm)
EAMP4
EAMP7
EAMP10
EAMP13
EAMP16
190
105.5
107.7
48.8
180
160
96
70
274
129.5
160.9
79
180
214
96
70
328
164
214.1
127.5
180
266
96
70
382183.5
267.3
131.3
19231910982
435226.5
320.5
141.5
19837210579
77
238 (W) x 254 (L)
107
292 (W) x 254 (L)
127.5
346 (W) x 254 (L)
161440 (W) x 260 (L)
171495 (W) x 260 (L)
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
129
10.1
Technical data
Memshield 3 type B TPN pan assemblies
279
List No.
Dimensions (mm)Minimum
recommended
abcdef enclosure size (mm)
EBMP41
EBMP61
EBMP81
EBMP121
EBMP122
EBMP182
EBMP242
130
333.6
413.7
511.5
638.1
750
910
1070
303.3
383.5
481.2
589.2
710
870
1030
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
107.5
160.6
213.7
319.9
319.9
479.2
638.5
35.7
35.7
53.2
22.2
16.7
16.7
16.7
–
–
–
–
336.5
435
515
21
21
21
40
40
40
40
440 (W) x 425 (L)
440 (W) x 478 (L)
440 (W) x 560 (L)
440 (W) x 720 (L)
440 (W) x 861 (L)
440 (W) x 1016 (L)
440 (W) x 1176 (L)
Technical data
Memshield 3, surge protection devices
10.1
Memshield 3, surge protection devices, dimensional drawings
EM3SSK1T2
EM3SSKT2/EM3SSKT12
List No.
A (mm)
EM3SSK1T2
254238163161
B (mm)
C (mm)
D (mm)
List No.
A (mm)
EM3SSK3T2
EM3SSK3T12
254238163161
254238163161
B (mm)
C (mm)
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
D (mm)
131
10.1
Technical data
Memshield 3, meter pack assemblies
Memshield 3, Meter pack assemblies, dimensional drawings
EBMMPCD120
EBMMPCT250/EBMMPCT250M/EBMMPCT250MID
Memshield 3, contactor incomer, dimensional drawings
132
List No.
A (mm) B (mm) C (mm) D (mm) E (mm) F (mm)
EBMCC1253
EBMCC2503
440252270161170130
440595270501130130
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Memshield 3, meter pack assemblies
10.1
Memshield 3, Meter pack assemblies, dimensional drawings (contd)
EBMMPSL250/EBMMPSL250M
EBMMPSL125/EBMMPSL125M
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
133
10.1
Technical data
18mm miniature circuit breakers (MCBs)
18mm miniature circuit breakers (MCBs), technical data
Tripping characteristic type B, C & D
7200
Eaton’s range of 10/15kA high performance miniature circuit
breakers (MCBs) are manufactured and tested to IEC EN 60898,
and IEC EN 60947-2, meeting the latest UK, European and
international standards, with ratings from 1A to 63A as standard.
Eaton miniature circuit breakers are available with B, C and
D characteristic curve as standard. Type C MCBs are most
commonly used in commercial and general applications where
there are lighting or motor loads involving high switching
surges that may cause unwanted operation of type B
devices. Type D devices are more commonly used on general
industrial applications with much higher inrush surges.
IEC/EN 60898
Type
Instantaneous Trip Current (x In)
Typical
Application
Eaton 10/15A
MCB type
B
3 to 5 General distribution EMBH
C
5 to 10
Commercial
EMCH
Light industrial
D
10 to 20
General
EMDH
Industrial
600
1
conventional non-tripping current
Int = 1.13 IN : t > 1 h
2
conventional tripping current
It = 1.45 IN : t < 1 h
300
3
120
4
3
60
5
30
6
7
8
9
10
2.55 IN : t = 1–60 s (IN < 32A)
t = 1-120 s (IN > 32A)
Type B: 3 IN : t > 0.1 s
5 IN : t < 0.1 s
Type C: 5 IN : t > 0.1 s
10 IN : t < 0.1 s
Type D: 10 IN : t > 0.1 s
20 IN : t < 0.1 s
t [sec]
5
2
1
3
0.5
0.2
0.1
5
B6
4
0.05
C
7
8
9
D
0.02
0.01
0.005
0.002
0.001
0.0005
Type B: Suitable for general, domestic and commercial
installations having little or no switching surges.
Type C: Suitable for general use in commercial or industrial
applications where the greater use of fluorescent lighting
and small motors can produce switching surges, which
may cause nuisance tripping of type B breakers.
Type D: Suitable for general industrial applications where there are
a lot of high inrush switching surges associated with equipment
such as transformers, large motors , welding and X ray equipment.
Earth fault loop impedances (Zs) to provide compliance
with BS 7671
The wiring regulations BS 7671 makes specific reference
to MCB types and the maximum earth loop impedance
allowable to meet the required disconnection times.
It can be seen that it is much easier to achieve
adequate disconnection times with type B devices
than it is with types C and indeed type D devices.
Maximum earth fault loop impedance i.e. Zs ohms for final circuits
fed from miniature circuit breakers MCBs or RCBOs with Uo of
230V, for instantaneous operation giving compliance with 0.4s
disconnection time of Reg 411.3.2.2 and 5s disconnection time
of 411.3.2.3
Note: A minimum Voltage factor Cmin = 0.95 has been introduced
to take account of variations in supply voltage depending on
time, place and transformer settings etc., in accordance with
Electricity Safety, Quality and Continuity regulations 2002.
The effect of this is to reduce the previous BS7671
maximum earth loop impedance Zs values by 5%.
134
1
1200
DIN rail mountable and suitable for use with both pin and
comb type busbar systems, Eaton’s MCBs are suitable for use
on 230/400 VAC systems and are calibrated for use at 40°C.
These devices suite with the other modular devices including
RCBOs, RCCBs and isolators, for use within Eaton Memshield 3
Distribution boards and a wide range of other applications.
The Eaton MCBs are fitted with box clamp terminals suitable
for use with cables up to 25mm2, and have a unique box
clamp barrier to prevent incorrect cable insertion.
2
3600
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
1
2
3
4
5
6
7 8 9 10
I/IN
15
20
30
40
50
Technical data
18mm miniature circuit breakers (MCBs)
10/15kA MCBs dimensional drawings
1-pole
(1P)
2-pole (2P),
1-pole+N (1P+N)
3-pole (3P)
MCB Max Zs (Ohms) figures (Data in line with BS7671)
4-pole (4P)
10/15kA MCBs technical data
Product standard
IEC EN 60898 & IEC EN 60947-2
No of poles
1p, 1p&N, 2p, 3p, 4p
Mechanical specification
Device width (pole)
17.7mm
Terminal type
Box clamp
Terminal capacity
1–25mm2
Terminal Screw
M5 combination
Terminal torque
2.0Nm – 2.4Nm max
Mounting
DIN rail
Degree of protection
IP 20
Positive contact indication
Red/Green flag indicator
Electrical specification
Rated voltage
230/240 V AC
48V DC (per pole)
Current ratings
1, 2, 4, 6, 10, 13, 16, 20,
25, 32, 40, 50, 63 A
Rated impulse and withstand voltage
4kV (1.2/50) u sec
Rated short circuit capacity10kA to IEC EN 60898 and
15kA to IEC EN 60947-2
Selectivity class
3 to EN 60898
Tripping characteristic
Instantaneous tripping current I mt
Type B: 3 In < Imt < 5 In
Type C: 5 In < Imt < 10 In
Type D: 10In < Imt < 20 In
Conventional non tripping current
I nt = 1.13 In
Conventional tripping current It = 1.45 In
Ref/Calibration temp
40o C
Number of operating cycles elec
>4000
Number of operating cycles mech
>20000
10.1
Range
In (A)
Disconnection 0.4s Disconnection 5s
Type B (EMBH Series)
Type C (EMCH Series)
Type D (EMDH Series)
1
2
4
6
8
10
13
16
20
25
32
40
50
63
1
2
4
6
8
10
13
16
20
25
32
40
50
63
1
2
4
6
8
10
13
16
20
25
32
40
50
63
43.70
43.70
21.8521.85
10.9310.93
7.287.28
5.465.46
4.374.37
3.363.36
2.732.73
2.192.19
1.751.75
1.371.37
1.091.09
0.870.87
0.690.69
21.85
21.85
10.9310.93
5.465.46
3.643.64
2.732.73
2.192.19
1.681.68
1.371.37
1.091.09
0.870.87
0.680.68
0.550.55
0.440.44
0.350.35
10.93
21.85
5.4610.93
2.735.46
1.823.64
1.372.73
1.092.19
0.841.68
0.681.37
0.551.09
0.440.87
0.340.68
0.270.55
0.220.44
0.170.35
Note : Values take account of minimum voltage factor Cmin - in accordance with
BS7671 Amendment 3
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
135
10.1
Technical data
27mm style miniature circuit breakers (for 250A distribution boards)
27mm style miniature circuit breakers
(for 250A distribution boards)
Tripping characteristic type B, C & D
7200
Eaton’s 27mm style miniature circuit breakers (MCBs) are
manufactured and tested to IEC EN 60947-2, meeting the
latest UK, European and international standards, with ratings
from 20A to 125A single and triple pole as standard.
2
3600
1
1200
600
Eaton’s MCBs are suitable for use on 230/400 VAC systems and
are calibrated for use at 40°C. and are available with B, C, and
D characteristic curve, with breaking capacities up to 25kA.
1
conventional non-tripping current
Int = 1.13 IN : t > 1 h
2
conventional tripping current
I t = 1.45 IN : t < 1 h
300
3
120
4
3
60
5
30
6
7
15/25kA MCBs technical data
Miniature circuit breakers – dimensional drawings
Type B: 3 IN : t > 0.1 s
5 IN : t < 0.1 s
Type C: 5 IN : t > 0.1 s
10 IN : t < 0.1 s
Type D:10 IN : t > 0.1 s
20 IN : t < 0.1 s
5
t [sec]
Product standard
IEC EN 60947-2
No of poles
1p, 3p
Mechanical specification
Device width (pole)
27mm
Terminal type
Lower Box clamp
Upper Box clamp
Terminal capacity
1 - 25 mm2
2 - 16 mm2
Terminal Screw
MS Combination
MS Combination
Terminal torque
2.4Nm max
1.5Nm max
Mounting
DIN rail
Degree of protection
IP 20
Positive contact indicationRed/Green flag indicator
Electrical specification
Rated voltage
230/400 V AC
60V DC (per pole)
Current ratings
63, 80, 100, 125 A
Rated impulse and withstand voltage
4kV (1.2/50) u sec
Rated short circuit capacity Types B and C
20–63A
– 25kA
80–100A – 20kA
125A – 15kA
Rated short circuit capacity Type D
20–63A
– 25kA
80A
– 20kA
100A
– 15kA
Selectivity class
In accordance with class C
Tripping characteristic
Instantaneous Tripping current I mt
Type B: 3 In < Imt < 5 In
Type C: 5 In < Imt < 10 In
Type D: 10In < Imt < 20 In
Conventional non tripping current
I nt = 1.13 In
Conventional tripping current It = 1.45 In
Ref/Calibration temp
40o C
Number of operating cycles elec
>20000
8
9
10
2.55 IN: t = 1- 60 s (IN < 32A)
t = 1-120 s (IN > 32A)
2
1
3
0.5
0.2
0.1
5
B6
4
0.05
C
7
8
9
D
0.02
0.01
0.005
0.002
0.001
0.0005
1
2
3
4
5
6
7 8 9 10
15
20
30
Eaton Memshield-3 MCB Max Zs (Ohms)
Data in line with BS7671
Range
In (A)
Type B (EMBS Series)
Type C (EMCS Series)
Type D (EMDS Series)
20
2.19
2.19
32 1.371.37
40 1.091.09
50 0.870.87
63 0.690.69
80 0.550.55
100 0.440.44
125 0.350.35
20
1.09
1.09
32 0.680.68
40 0.550.55
50 0.440.44
63 0.350.35
80 0.270.27
100 0.220.22
125 0.170.17
20
0.55
1.09
32 0.340.68
40 0.270.55
50 0.220.44
63 0.170.35
80 0.140.27
100 0.110.22
Disconnection 0.4s Disconnection 5s
Note : Values take account of minimum voltage factor Cmin - in accordance with
136
40
I/IN
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
BS7671 Amendment 3
50
Technical data
Residual current circuit breakers (RCCBs)
Residual current circuit breakers (RCCBs) technical data
10.1
RCCB dimensions (mm)
PFIM
PFIM
Eaton’s range of residual current circuit breakers without integral
Overload protection (RCCBs), are manufactured2Pto IEC EN/61008
and meet the latest European and International standards.
4P2P 2P
DIN rail mountable in 2 and 4 module widths these RCCBs
provide protection solutions to a wide range of applications.
With standard thermal ratings of 16A to 100A and trip
80
sensitivities of 10mA, 30mA, 100mA and 300mA, these devices
can be equipped with a range of modular accessories.
5,5
30,5 4P
4,5
5,5
30,5
4,5
T
80
80
The Eaton RCCBs suite with the complete range of modular
35
devices, and are for use within Eaton’s Memshield 3
distribution boards and other applications.
45 80
10,5
70
35
44
70
44
60
These devices will accommodate cables up to 35mm .
60
2
4P
Terminology
RCD – Residual current device:- This is the generic term covering a
range of devices that are able to detect residual currents sometimes
also referred to as earth leakage current. The residual current is
measured by detecting the difference between the current flowing
in the live and neutral conductors of a circuit and where the residual
current is above a predefined level the RCD will trip. RCDs are
available in a range of trip sensitivities for different applications.
RCCB – Residual current circuit breaker is an RCD which
will cause disconnection of the electrical supply should it
detect a residual current passing through the device, above a
specified tripping current limit e.g. 30mA. This device does not
provide over current protection and is therefore also referred
to as an RCCB without integral over-current protection.
RCBO – Residual current circuit breaker, with overload protection,
is an RCCB which will cause disconnection of the electrical supply
should it detect a residual current above a specified tripping
current limit, combined with integral overload, over-current, and
shortcircuit protection associated with a miniature circuit breaker.
The 17th Edition of the IEE wiring regulations BS7671 now places
much greater emphasis on the use of 30mA RCDs to provide
“additional protection” in many areas covered by the regulations,
such as circuits feeding socket outlets and for
the protection of concealed wiring.
Trip sensitivities
10mA – Provides the highest degree of RCD protection in
hazardous environments where supplementary protection against
electric shock is required. This very high sensitivity should only
be applied to final circuits where a high degree of risk exists.
30mA – Provides a high degree of protection against electric
shock due to direct and indirect contact. A 30mA RCD will trip
within 40mS when a fault current of 150mA is detected.
This type of RCD is required to satisfy the requirements for
“additional protection” in accordance with BS7671 (IEE wiring regs.)
100mA – Provides a degree of protection against
electric shock resulting from indirect contact, and is
generally used to protect a group of circuits as well
as providing overall protection against Fire risk.
300mA – Provides a lower level of RCD protection in
the form of an overall protection against the risk of
fire resulting from faults in electrical wiring etc.
RCCB technical data
Specifications
2-pole RCCB
4-pole RCCB
Product standard
IEC EN 61008
IEC EN 61008
No of poles
2p
4p
Mechanical specification
Device width
35 mm
70 mm
Terminal type
Box clamp Box clamp
Terminal capacity
1.5–35mm235mm2
Terminal Screw
M5 combination
M5 combination
Terminal torque
2.4Nm max
2.4Nm max
Mounting
DIN rail DIN rail
Degree of protection
IP 20
IP 20
Positive contact indication Yes (toggle position)
Red/green flag
Electrical specification
Rated voltage
230/400 V AC
230/400 V AC
Current ratings
16, 40, 63, 80,100 A
16, 40, 63, 80,100 A
Rated impulse
4kV (1.2/50) u sec
4kV (1.2/50) u sec
and withstand voltage
Rated short circuit capacity 10kA (with back up)
10kA (with back up)
Sensitivity AC AC
Tripping characteristic
Rated tripping currents
10, 30, 100, 300 mA
10, 30, 100, 300 mA
Tripping type Instantaneous
Instantaneous
Number of
>4000
>4000
operating cycles elec
Number of
>20000
>20000
operating cycles mech
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
137
10.1
Technical data
Residual current circuit breakers – with overload (RCBOs)
Residual current circuit breakers – with overload protection (RCBOs) technical data
Eaton’s range of residual current circuit breakers with integral overload protection (RCBOs), are
manufactured to IEC EN 61009 and meet the latest European and International standards.
Trip Sensitivity
Provides a high degree of protection against electric shock due to direct contact. A 30mA
RCD will trip within 40mS when a fault current of 150mA is detected.
This type of RCD is required to satisfy the requirements for “additional protection” in accordance with BS7671 (IET wiring regs.)
RCBOs dimensions (mm)
Single phase RCBO technical data
PKS6
Specifications
Product standard
No of poles
Mechanical specification
Device width
Terminal type
Terminal capacity
Terminal Screw
Terminal torque
Mounting
Degree of protection
Positive contact indication
Electrical specification
Rated voltage
Current ratings
Rated impulse and withstand voltage
Rated short circuit capacity
Sensitivity Tripping characteristic
Instantaneous Tripping current I mt
Conventional non tripping current
Conventional tripping current Ref/Calibration temp
Rated tripping currents
Tripping type Number of operating cycles elec
Number of operating cycles mech
IEC EN 61009
1p & solid N
17.7 mm
Lower-Box clamp
1–25mm2
M5 combination
2.4Nm max
DIN rail
IP 20
Yes (Red/Green flag)
Upper-Box clamp
2-16mm2
M4 combination
1.5Nm max
102
102
230/240 V AC
6, 10, 16, 20, 25, 32, 40, 45A
4kV (1.2/50) u sec
10kA
Type A
Type B: 3 In < Imt < 5 In
Type C: 5 In < Imt < 10 In
I nt = 1.13 In
It = 1.45 In
40o C
10, 30, 100mA
Instantaneous
>400
>20000
Three phase RCBO technical data
Electrical
Design according to Tripping
line voltage-independent Rated voltage Ue Rated tripping current IΔn Rated non-tripping current IΔno Sensitivity Selectivity class Rated breaking capacity Rated current Rated peak withstand voltage Uimp IEC/EN 61009
instantaneous 250A (8/20μs)
surge current-proof
240/415V; 50Hz
0, 100, 300 mA
0.5 IΔn
Type A (AC and pulsating DC)
3
10 kA
6 - 32 A
4 kV (1.2/50μs)
Characteristic B, C, D
Maximum back-up fuse (short circuit) 100 A gL (>10 kA)
Endurance electrical comp. ≥ 4,000 operating cycles
mechanical comp. ≥ 20,000 operating cycles
138
Mechanical
Frame size Device height Device width Upper and lower terminals Terminal capacity Degree of protection Operating temperature Resistance to climatic conditions POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
45 mm
80 mm
70 mm
open mouthed/lift terminals
1 - 25 mm2
IP20
-25°C to +40°C
acc. to IEC/EN 61009
10.1
Technical data
Control and switching devices dimensions and data
Analogue time switches
TSSD1CO TSSD1NO General
Operating voltage 230V AC 230 V AC Frequency 50 Hz 50 Hz Stand-by power 0.5 W 0.5 W Time control Net Net Accuracy acc. Net acc. Net Power reserve -
-
/
Battery type -
-
Degree of protection (EN 60529) IP20 IP20 Ambient temperature -20 ˚C...+55 ˚C -20 ˚C...+50 ˚C Protection class (EN 60730-1) II II Switching contact(s)
Type of switching contact 1 x CO 1 x NO Switching capacity at 250 V~, cos = 1 16 A 16 A Switching capacity at 250 V~, cos = 0,6 4A 4A
Programming features
Period of program Day Day Number of channels 1
1
Minimum cycle time 15 min. 15 min. Programmable every 15 min. every 15 min. Program steps 96 96 On, Off, Auto On, Off, Auto Manual / Hand / Permanent switching 1) Switching status indication x
x
Dimensions and weight
Number of module width 3
1
Dimensions Width 52.5 mm 17.5 mm Height 90 mm 90 mm Depth 65.5 mm 65.5 mm Mounting DIN-rail DIN-rail Terminals
Terminal screw size M3.5 M3.5 TSQW1CO TSQD1CO TSQD1NO
110 - 230 V AC 50 - 60 Hz 0.5 W Quartz ± 1 sec. / day 200 hrs / 100 hrs at 110 V
NiMH IP20 -20 ˚C...+55 ˚C II 110 - 230 V AC 50 - 60 Hz 0.5 W Quartz ± 1 sec. / day 200 hrs/
100 hrs at 110 V
NiMH IP20 -20 ˚C...+55 ˚C II 230 - 240 V AC
50 - 60 Hz
0.5 W
Quartz
± 1 sec. / day
±3 days
NiMH
IP20
-10 ˚C...+50 ˚C
II
1 x CO 16 A 4A
1 x CO 16 A 4A
1 x NO
16 A
4A
Week 1
2 hrs every 2 hrs 84 On, Off, Auto x
Day 1
15 min. every15 min. 96 On, Off, Auto x
Day
1
15 min.
every 15 min.
96
On, Off, Auto
x
3
52.5 mm 90 mm 65.5 mm DIN-rail 3
52.5 mm 90 mm 65.5 mm DIN-rail 1
17.5 mm
90 mm
65.5 mm
DIN-rail
M3.5 M3.5 M3.5
) Remark
1
ON = Permanent ON
OFF = Permanant OFF
Hands = ON or OFF. valid until next program cycle overrules
Auto = According program
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
139
10.1
Technical data
Technical data
Control and switching devices dimensions and data
7
Analogue
dailyand
andweekly
weekly
timers,
dimensional
drawings
Analogue daily
timers,
dimensional
drawings
.
.
.
.
7
.
Analogue
time
switches,
wiring
diagrams
Analoguedaily
dailyand
andweekly
weekly
time
switches,
wiring
diagrams
CA081003EN - January 2013 TECHNICAL DATA
140
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
13
10.1
Technical data
Control and switching devices dimensions and data
Digital timers - week programme
General
Nominal operating voltage Frequency Stand-by power Time base control 1) Accuracy Power reserve Type of battery Protection class (acc. EN 60529) Permissible ambient temperature Protection class at proper installation (acc. EN 60730-1) Switching contact(s)
Type of switching contact Switching capacity at 250 V~, cosϕ = 1
Switching capacity bij 250 V~, cosϕ = 0,6
Switching capacity for lighting
- Incandescent lamp - Halogen lamp Programming features
Period of programme Number of channels Minimum switching capacity Minimum cycle time Maximum programming steps in memory Summer / wintertime automatic (or manual on/off)
Random programme Holiday programme Cycle programme Astro function Pulse switching Manual switching 2) LCD backlighting PIN code Dimensions and weight
Number of module width Dimensions Width Height Depth Mounting Terminals
Terminal type 1) Remark:
TSDW1CO TSDW1COMIN TSDW2CO TSDW1COA TSDW1CODG
220 - 240 V AC 50 - 60 Hz 0,8 W Quartz ± 0,5 sec. / day 10 year Lithium IP20 -30 ˚C...+55 ˚C II 240 V AC 50 - 60 Hz 0,4 W Quartz ±0,5 sec. / day 10 year Lithium (exchangeable) IP20 -25 ˚C...+55 ˚C II 220 - 240 V AC 50 - 60 Hz 0,8 W Quartz ± 0,5 sec. / day 10 year Lithium IP20 -30 ˚C...+55 ˚C II 230 - 240 V AC 50 - 60 Hz 0,8 W Astro
± 0,5 sec. / day 10 year Lithium IP20 -30 ˚C...+55 ˚C II 230 - 240 V AC
50 - 60 Hz
1,4 W
Quartz or DCF / GPS
± 0,5 sec. / day
10 year
Lithium
IP20
-30 ˚C...+55 ˚C
II
1 x CO 16 A 10 A 1 x CO 16 A 6A
2 x CO 16 A 10 A 1 x CO 16 A 10 A 1 x CO
16 A
10 A
2600 W 2600 W 1000 W 1000 W 2600 W 2600 W 2600 W 2600 W 2600 W
2600 W
Week 1
10 mA 1 min. 56 Yes No Yes No No No On, Off, Auto Yes
Yes Week 1
-
1 min. 56 Yes No Yes No No No On, Off, Auto -
Yes Week 2
10 mA 1 min. 56 Yes No Yes No No No On, Off, Auto Yes Yes Week 1
10 mA
1 min. 56 Yes No Yes No Yes No On, Off, Auto Yes Yes Week
1
1 sec.
84
Yes
Yes (2)
Yes
Yes
No
Yes
On, Off, Auto
Yes
Yes
2
35.8 mm 90.1 mm 69.2 mm DIN-rail 1
17.5 mm 90 mm 65.5 mm DIN-rail 2
35.8 mm 90.1 mm 69.2 mm DIN-rail 2
35.8 mm 90.1 mm 69.2 mm DIN-rail 2
35.8 mm
90.1 mm
69.2 mm
DIN-rail
Spring Screw Spring Spring Spring
) Remark:
2
Astro function: Automatic calculation of sunrise and sunset times
ON = Permanent ON
DCF / GPS: Time synchronization is possible by connecting external antenna (TSADCF of TSAGPSKIT).
OFF = Permanent OFF
Auto = According Programme
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
141
10.1
Technical data
7
Technical data
Control and switching devices dimensions and data
Digital weekly time switches, dimensional drawings
drawings
.
.
.
.
.
.
.
.
7
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Digital weekly timers, wiring diagrams
diagrams
142
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
CA081003EN - January 2013 TECHNICAL DATA
15
Technical data
Control and switching devices dimensions and data
10.1
Twilight switches and combination with timer
General
Nominal operating voltage Frequency Stand-by power Photosensitivity Maximum cable length for sensor Maximum cable length for sensor Protection class at proper installation - modular device Switching contact(s)
Type of switching contact Contact type Switching capacity at 250 V~,
cos = 1 Switching capacity at 250 V~,
cos = 0,3 Maximum lamp load:
- Incandescent lamp - Energy saving lamp - Fluorescent lamp load - single fitting
uncompensated (inductive)
Switching delay off Switching status indication (not delayed) Programming features
Period of programme Number of channels
Programming using software and memory Summer / wintertime automatic (or manual on/off) Random programme
Holiday programme Cycle programme LCD backlighting Dimensions and weight
Number of module width Dimensions Width Height Depth Terminals
Terminal type SRSD1NO SRSD1COW SRCD1CO SRSW1NO
220 - 240 V AC 50 - 60 Hz 0,8 W 2 - 100 lux 25 mtr. -25 ˚C...+50 ˚C II 220 - 240 V AC 50 - 60 Hz 1,1 W 2 - 2000 lux 100 mtr. -30 ˚C...+55 ˚C II 220 - 240 V AC 50 - 60 Hz 1,3 W 2 - 2.000 lux 100 mtr. -30 ˚C...+55 ˚C II 220 - 230 V AC
50 - 60 Hz
0,6 W
2 - 2.000 lux
-35 ˚C...+55 ˚C
II
1 x NO Floating 16 A -
1 x CO Floating
16 A -
1 x CO Floating (not for SELV)
16 A 10 A 1 x NO
Floating 230 V
16 A
10 A
2300 W 9 x 7 W, 7 x 11 W,
7x 15 W, 7 x 20W,
7 x 23 W
2300 VA 2300 W 9 x 7 W, 7 x 11 W,
7x 15 W, 7 x 20W
7 x 23 W
2300 VA 2600 W 22 x 7 W, 18 x 11 W,
16 x 15 W, 16 x 20 W,
14 x 23 W
2300 VA
2300 W
9 x 7 W, 7 x 11 W,
7 x 15 W, 7 x 20 W,
7 x 23 W
2300VA
20 sec. Yes 0 - 20 min.
Yes 0 - 59 min. -
2 - 100 sec.
Yes
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Week 1
Yes Yes No Yes No Yes -
1
17.5 mm 85.5 mm 65.5 mm 2
54 mm 86 mm 65.5 mm 3
72 mm 86 mm 65.5 mm 85 mm
118.4 mm
49.4 mm
Screw Spring Spring (duo fix) -
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
143
10.1
Technical data
Control and switching devices dimensions and data
7
Technical data
Twilight
switches
and
combinations
with
timer,
dimensional
drawings
Twilight
switches
and
combinations
with
timer,
dimensional
drawings
.
.
.
.
7
.
.
.
.
.
.
Twilight
switches
and
combinations
with
timer,
wiring
diagrams
Twilight
switches
and
combinations
with
timer,
wiring
diagrams
144
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
CA081003EN - January 2013 TECHNICAL DATA
17
Technical data
Control and switching devices dimensions and data
10.1
Contactors type CR
Products
ContactorsAux. contact
Rating
20 A
25 A
40 A
63 A
6A
General
Standards
IEC 60947-4-1, IEC 61095
IEC 60947-5-1
Nominal operating voltage 1-phase Ue 1-ph.
230 V
230 V
230 V
230 V
230 V
Nominal operating voltage 3-phase Ue 3-ph.
400 V
400 V
400 V
-
Overvoltage protection on coil
430 V (*5)
430 V (*5)
430 V
430 V
Mechanical endurance (switching cycles) 3.000.0003.000.0003.000.0003.000.0003.000.000
Protection class (acc. DIN 40 050, IEC 529)
IP20
IP20
IP20
IP20
IP20
Permissible ambient temperature
-5…+55 ˚C
-5…+55 ˚C
-5…+55 ˚C
-5…+40 ˚C
-5…+55 ˚C
Storage temperature
-30…+80 ˚C
-30…+80 ˚C
-30…+80 ˚C
-30..+80 ˚C
-30…+80 ˚C
Contact rating
Rated insulation voltage Ui
440 V
440 V
500 V
500 V
500 V
Frequency
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz‘
50/60 Hz
Rated impulse withstand voltage Uimp
4 kV
4 kV
4 kV
4 kV
4 kV
Rated thermal current Ith
20 A
25 A
40 A
63 A
6A
AC1/AC7a Rated operational current Ie
20 A
25 A
40 A
63 A
–
AC1/AC7a Operational power rating at Ue = 230 Vac Pmax
4 kW
9 kW
16 kW
24 kW
–
AC1/AC7a Operational power rating at Ue = 400 Vac Pmax
16 kW
26 kW
40 kW
–
–
AC3/AC7b Operational power rating at Ue = 230 Vac Pmax
1,3 kW (*1)
2,2 kW
5,5 kW
8,5 kW
–
AC3/AC7b Operational power rating at Ue = 400 Vac Pmax
4 kW
11 kW
15 kW
-
–
DC1 Rated thermal current at Ue = 24 Vdc Ie
20 A
25 A
40 A
63 A
–
DC1 Rated thermal current at Ue = 110 Vdc Ie
1A
2A
4A
4A
–
DC1 Rated thermal current at Ue = 220 Vdc Ie
0,5 A
0,5 A
0,8 A
0,8 A
–
DC1 Rated thermal current at Ue = 24 Vdc (2-poles in series) Ie
20 A
25 A
40 A
63 A
–
DC1 Rated thermal current at Ue = 110 Vdc (2-poles in series) Ie
3 A
4 A
10 A
10 A
–
DC1 Rated thermal current at Ue = 220 Vdc (2-poles in series) Ie
1,5 A
1,5 A
6 A
6 A
–
DC1 Rated thermal current at Ue = 24 Vdc (3-poles in series)
–
25 A
40 A
63 A
–
DC1 Rated thermal current at Ue =110 Vdc (3-poles in series)
–
6:00 AM
30 A
35 A
–
DC1 Rated thermal current at Ue = 220 Vdc (3-poles in series)
–
2,5 A
20 A
30 A
–
Electrical endurance
Maximum operating cycles at AC1/AC7a application
200.000 x
200.000 x
100.000 x
100.000 x
–
Maximum operating cycles at AC3/AC7b application
300.000 x
500.000 x
150.000 x
150.000 x
–
Maximum operating cycles at AC5a application
100.000 x
100.000 x
100.000 x
100.000 x
–
Maximum operating cycles at AC5b application
100.000 x (*2)
100.000 x (*2)
100.000 x (*3)
100.000 x (*4)
–
Maximum operating cycles per hour
600 x
600 x
600 x
600 x
600 x
Power dissipation per contact at In
1,7 W
2,2 W
4 W
8 W
–
Maximum back-up fuse
25 A gL
35 A gL
63 A gL
80 A gL
–
Rating
20 A
25 A
40 A
63 A
6A
Operating coil (for combined ac/dc types only – CR…)
Coil inrush power (for all voltage ratings)
2,5 W 3 W
5 W
5 W
–
Coil consumption (for all voltage ratings)
2,5 W
3 W
5 W
5 W
–
Closing delay
15-25 ms
15-30 ms
15-20 ms
15-20 ms
–
Opening delay
35-45 ms
50-80 ms
35-45 ms
35-45 ms
–
Operating coil (for ac types only – CR…A)
Coil inrush power (for all voltage ratings)
13 W/15 VA
17 W/27 VA
–
Coil consumption (for all voltage ratings)
2 W/5 VA
1 W/2.7 VA
–
–
–
Closing delay
15 ms
15-25 ms
–
–
–
Opening delay
10 ms
35-45 ms
–
–
–
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
145
10.1
Technical data
Control and switching devices dimensions and data
Contactors type CR (continued)
Products
ContactorsAux. contact
Dimensions
Width
18 mm
35 mm
54 mm
54 mm
9 mm
Height
85 mm
85 mm
85 mm
85 mm
85 mm
Depth
60 mm
60 mm
60 mm
60 mm
60 mm
Terminals for main & auxiliairy contacts
Terminal capacity – fine stranded wire
1…6 mm2
1…6 mm2
1…16 mm2
1…16 mm2
1…2,5 mm2
Terminal capacity – solid wire
1…10 mm2
1…10 mm2
1…25 mm2
1…25 mm2
1…2,5 mm2
Terminal screw size
M3,5
M3,5
M5
M5
M3
Terminal screw head type (Pozidrive)
PZ Size 1
PZ Size 1
PZ Size 2
PZ Size 2
PZ Size 1
Maximum torque
1,2 Nm
1,2 Nm
2,0 Nm
2,0 Nm
0,8 Nm
Terminals for operating coils
Terminal capacity – fine stranded wire
1…2,5 mm2
1…2,5 mm2
1…2,5 mm2
1…2,5 mm2
Terminal capacity – solid wire
1…2,5 mm2
1…2,5 mm2
1…2,5 mm2
1…2,5 mm2
Terminal screw size
M3M3M3M3
Terminal screw head type (Pozidrive)
PZ Size 1
PZ Size 1
PZ Size 1
PZ Size 1
Maximum torque
0,6 Nm
0,6 Nm
0,6 Nm
0,6 Nm
Remarks:
*1) Only applicable for normally open contact(s)
*2) At 1,5 kW
*3) At 3 kW
*4) At 5 kW
*5) For CR… types only (combined ac/dc types), NOT for CR… A types
Contactors, type CR20, CR25
Contactors, type CR40, CR63
Day/night contactors, type CRM20, CRM25
Auxiliairy contact
146
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Earth leakage relays and CTs
10.1
Earth leakage relays and CTs, dimensional drawings
PFR-W-30
PFR-W-20
PFR-W-30
Type A
B
C
D
E
PFR-W-35 PFR-W-70 PFR-W-105 PFR-W-140 PFR-W-210 100 130 170 220 299 79 110 146 196 284 26 32 38 48.5 69 48.5 66 94 123 161 35
70
105
140
210
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
147
10.2
Technical data
NZM MCCBs, maximum Zs (Ohms) figures to achieve disconnection at 0.4s and 5s
MCCB type
Rating (A)
NZM1 range
NZM2 range
NZM3 range
NZMLW range
Disconnection 0.4s
Minimum setting
Maximum setting
Maximum setting
16
-1.366
-1.485
20 1.8211.0931.4961.188
32 1.1380.6830.9360.742
40 0.9100.5460.7490.594
50 0.7290.4370.5990.475
63 0.5780.3470.4750.377
80 0.4550.2740.3740.297
100 0.3640.2190.2990.238
125 0.2920.1750.2390.190
160 0.2280.1370.1870.148
125 0.2920.1750.2390.190
160 0.2280.1370.1870.148
200 0.1820.1090.1500.119
250 0.1450.0870.1200.095
250 0.1450.0870.1200.095
320 0.1140.0680.0930.074
400 0.0910.0550.0750.060
630 0.1740.0440.1740.044
800 0.1370.0340.1370.034
Note : Values take account of minimum voltage factor Cmin - in accordance with BS7671 Amendment 3
148
Disconnection 5s
Minimum setting
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Panelboard dimensional drawings
10.2
Panelboard dimensional drawings
Panelboards
Side extension boxes
Extension boxes
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
149
10.2
Technical data
Panelboard dimensional drawings
Panelboard dimensions
Description Eaton list number
Dimensions (mm)
A
B
Extension boxes
Filler boxes
Panelboards
Side cable box
Meter packs
Side meter box
Din enclosures
Surge suppression box
EPBN1EX250
EPBN2EX250
EPBN3EX250
EPBN1CX250
EPBN2CX250
EPBN1425
EPBN1625
EPBN1825
EPBN11225
EPBN1640
EPBN11240
EPBN2640
EPBN21240
EPBN21840
EPBN2863
EPBN21263
EPBN21863
EPBN3880
EPBN31280
EPBN1425SXB
EPBN1525SXB
EPBN1825SXB
EPBN11225SXB
EPBN2640SXB
EPBN21240SXB
EPBN21840SXB
EPBN21263SXB
EPBN21863SXB
EPBN1EX250M
EPBN2EX250M
EPBN3EX250M
EPBN1425SXM
EPBN1525SXM
EPBN1825SXM
EPBN11225SXM
EPBN2640SXM
EPBN21240SXM
EPBN21840SXM
EPBN21263SXM
EPBN21863SXM
EPBN1EXDIN
EPBN2EXDIN
EPBN3EXDIN
EPBN1SPD123
EPBN1SPD1234
705525185.5
90 – – –
855525210.5
165– – –
980 625 210.5177.5– – –
185.5
––––––
210.5
––––––
830544703185.5
52514389
920544703185.5
52518889
1010.5837.5703 185.5525 86.5 89
1191.51002 703 185.5525 94.7589
1291.5956.5853 210.5525 167.5164
1563 1228 853 210.5525 167.5164
1291.5956.5853 210.5525 167.5164
1563 1228 853 210.5525 167.5164
1834.51499.5853 210.5 525 167.5 164
1650 1315 978 210.5625 167.5176.5
1650 1315 978 210.5625 167.5176.5
1915.51580.5978 210.5 625 167.5 176.5
1650 1315 978 210.5625 167.5176.5
1915.51580.5978 210.5 625 167.5 176.5
830544143185.5
– – –
920544188185.5
– – –
1010.5837.586.5 185.5– – –
1191.51002 94.75185.5– – –
1291.5856.5167.5210.5– – –
1563 1228 167.5210.5– – –
1834.51499.5167.5 210.5 –
–
–
1650 1315 167.5210.5– – –
1915.51580.5167.5 210.5 –
–
–
705525185.5
90 – – –
855525210.5
165– – –
980 625 210.5177.5– – –
830544143185.5
– – –
920544188185.5
– – –
1010.5837.586.5 185.5– – –
1191.51002 94.75185.5– – –
1291.5856.5167.5210.5– – –
1563 1228 167.5210.5– – –
1834.51499.5167.5 210.5 –
–
–
1650 1315 167.5210.5– – –
1915.51580.5167.5 210.5 –
–
–
705525185.5
90 – – –
855525210.5
165– – –
980 625 210.5177.5– – –
185.5
––––––
210.5
––––––
150
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
C
D
E
F
G
Technical data
Panelboard dimensional drawings
Rating (A) Panelboard/incomer connection kit combination
10.2
Dimensions A (mm)
250
EPBN1425
EPBKN1253210
EPBN1625
EPBKN1253M
EPBN1825
EPBKN1254
EPBN11225
EPBKN1254M
EPBN1425
398
EPBN1625
EPBKN125L
EPBN1825
EPBKN125LM
EPBN11225
400
EPBN1640
EPBKN2403380
EPBN11240
EPBKN2403M
EPBN2640
EPBKN2404
EPBN21240
EPBKN2404M
EPBN21840
EPBN1640
731
EPBN11240
EPBKN240L
EPBN2640
EPBKN240LM
EPBN21240
EPBN21840
630
EPBN2863
EPBKN2633705
EPBN21263
EPBKN2633M
EPBN21863
EPBKN2634
EPBKN2634M
EPBN2863
EPBKN263L775
EPBN21263
EPBKN263LM
EPBN21863
800
EPBN3880
EPBKN3803454
EPBN31280
EPBKN3803M
EPBKN3804
EPBKN3804M
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
151
10.2
Technical data
Panelboard multifunction meter, technical characteristics and specification
• 3 phase 3 or 4 wire system.
• Liquid crystal display with backlight. 4 lines, 4 digits per line to
show electrical parameters. 5th line, 8 digits to show energy.
Bar graph for current indication as percentage of CT rating.
• Meter is self-powered from voltage supply.
Auxiliary voltage supply not required.
• Front panel indicator when Pulse Output or Comms operates.
• Fast installation plug-ib cabling for current and voltage
inputs. Feed-through voltage supply capability.
The range of meter is a class 1 multi-function, panel
mounting meter to measure electrical parameters on LV
supplies to The meter is a Class 1 multi-function, panel
mounting meter to measure electrical parameters on
LV supplies to and from TP&N distribution boards. It is
ideal for applications such as:
• Phase sequence detection and correction capability.
• Energy monitoring.
• Multifunction meter measuring parameters:
• Power factor analysis.
• 96 x 96mm panel mount, 55mm rear panel.
• Modbus comms & pulse output.
•
Voltage (P-P / P/N) (individual/average)
• Supply capacity.
•
Current (I1, I2, I3) (individual/average)
• Building regs part L2.
•
Frequency
• Building performance.
•
Power factor (individual/average)
• Environmental standards e.g. IS14001, EMAS, ECA.
•
Active, reactive, apparent power (individual/total)
• Climate change levy.
•
Active, reactive, apparent energy (total)
• Carbon trading.
• Display scrolling selectable for automatic or manual.
• Carbon footprints.
The six dedicated buttons are labelled as V, I, VAF, PF, P, E. The parameters available by pressing each key are detailed below:
Measurements available via:
Button 1 (V)
Button 2 (I)
Button 3 (VAF)
Button 4 (PF)
Button 5 (P)
Button 6 (E)
Line to neutral voltage of three phase and average line to line voltage
Line to line voltage of three phase and average line to line voltage
Phase current of three phase and average phase current.
Phase current of three phase and maximum phase current.
Voltage, current, power factor of first phase and frequency
Voltage, current, power factor of second phase and frequency
Voltage, current, power factor of third phase and frequency
Average value of voltage, current, power factor of three phase and frequency
Power factor of three phase and average power factor
Active power of three phase and total active power
Reactive power of three phase and total reactive power
Apparent power of three phase and total apparent power
Active, reactive, apparent power and power factor of first phase
Active, reactive, apparent power and power factor of second phase
Active, reactive, apparent power and power factor of third phase
Total active, reactive, apparent power and average power factor of three phase
Maximum active power demand, reactive power demand, apparent power demand
Minimum active power demand, reactive power demand
Active energy of three phase
Apparent energy of three phase
Reactive energy of three phase
Accuracy
Accuracy
MeasurementAccuracy
MeasurementAccuracy
Voltage VL-N
± 0.5% of full scale
Voltage VL-L
± 0.5% of full scale
Current
± 0.5% of full scale
Frequency± 0.1%
For voltage >20V L-N
For voltage >35V L-N
Active power
Class 1
Apparent power
Class 1
Reactive power
Class 1
Power factor
Active energy
Apparent energy
Reactive energy
MAX / MIN active power
MAX / MIN reactive power
MAX apparent power
152
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
± 0.01
Class 1
Class 1
Class 1
Class 1
Class 1
Class 1
Technical data
MCCB pan assemblies, dimensions
250A pan assembly dimensions EPBPN1425–EPBPN11225
10.2
400A pan assembly dimensions EPBPN1640–EPBPN21840
Eaton listA
B
C
D
number
EPBPN142529.5
483
592.5
181.5
EPBPN162529.5
578.5
683
272
EPBPN1825131
669
773.5
362.5
EPBPN11225131
850
954.5
543.5
Eaton list ABCDE F GHJ
number
EPBPN1640 167 N/A473.5923 979.5222.25
N/AN/A318.25
EPBPN11240 167 438.5725.51175 1231.8358 N/A N/A 454
EPBPN2640167N/A473.5
923979.5
17796.75
102383
EPBPN21240 1673487451194.5
1251312.75
232.5
102518.75
EPBPN21840 167 529 1016.51466 1522.5448.25368.25102 654.5
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
153
10.2
Technical data
MCCB pan assemblies, dimensions
630–800A pan assembly dimensions EPBPN2863, EPBPN21263, EPBPN21863, EPBPN3880, EPBPN31280
154
Eaton list
number
ABCDE F GHJ K
EPBPN2863
EPBPN21263
EPBPN21863
EPBPN3880
EPBPN31280
167N/A543.5
9961052.5
1240129117796.75
601.5
167 N/A 724.511771233.5
14211472267.5187.25
692
167 438.5996 1448.5
150516921743403.25
323 828
167 N/A 580.510331089.5
12771328177 96.75638.5
167 N/A 761.512141270.5
14581509222.25
142 794.5
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Enclosed switch & fusegear
10.3
Glasgow fuse-switch-disconnectors and switch-disconnectors dimensions
Nominal
Poles
unit rating, In (A)
Dimensions, mm
ABCDE F HJ R
63
100
160, 200
315, 400
500, 630, 800
289
289 327 327 431 431 501 596 SPSN, DP
TPN, TPSN SPSN, DP TPN, TPSN SPSN, DP TPN, TPSN TPN, TPSN TPN, TPSN 199
275 199 275 280 340 467 680 180
180 180 180 229 229 291 381 283 283 283 283 383 383 545 715 203 203 241 241 340 340 385 440 127 203 127 203 140 200 375 550 7.9 7.9 7.9 7.9 7
7
10 14 43 43 43 43 45 45 58 78 36
36
35
35
70
70
46
65
Units have retractable handles. ‘D’ dimension indicates fully extended operating position.
Rating to BS EN 60947-3 general performance characteristics
Nominal unit rating, Ie (A)
Utilisation category at Ue 415V to BS EN 60947-3
Switch-disconnectoreFuse-switch-disconnector
AC21A Ie
AC22A Ie
AC23A Ie
63
100
160
200
315
400
500
630
800
125A
125A
Use 200A
315A
Use 400A
400A
Use 630A
630A
800A
63A41A
100A41A
160A
160A
200A160A
315A
200A
400A200A
500A
385A
630A385A
800A500A
Operational performance
• In accordance with BS EN 60947-3: “A” categories all ratings have been tested to values specified below:
Rated operational current, Ie (A)
Operating cycles
Without current
With current
63–100
160–315
400–630
800
8,5001,50010,000
7,0001,0008,000
4,0001,0005,000
2,500500 3,000
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Total
155
10.3
Technical data
Enclosed switch & fusegear
Glasgow parallel cable connection & copper terminal plate
35
CRS
Parallel cable connection
A = 803GNC
B = 6PCB
C = 90CSB/A
CRS
Copper terminal plate
An 802GCC (copper connection piece) is required in addition
to switch enclosure for parallel cable connection.
Each copper terminal plate has 1-M16 x 50mm bolt, nut and washers for single hole
sockets. 4-M10 tapped holes are also provided for 4 hole sockets or solid copper.
Cable extension boxes dimensions
Eaton list
number
Dimensions, mm
ABC
1PCB 2PCB 3PCB 4PCB 5PCB 6PCB 148 148 148 302 213 213 133 209 259 347 515 515 113
113
132
184
187
327
Spreader boxes dimensions
Eaton list
number
Straight entry
50 CSB 60 CSB 70 CSB 90 CSB 45° Angled entry
50 CSBA 60 CSBA 70 CSBA 90 CSBA 156
Dimensions, mm
Fixing bolts
ABCE F No.
Type
83 108 133 133 232 283 384 530 170 260 322 450 67 89 114 114 171 216 318 457 4
4
4
4
M6
M8
M8
M10
83 108 133 133 232 283 384 530 250 310 390 510 67 89 114 114 171 216 318 457 4
4
4
4
M6
M8
M8
M10
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Enclosed switch & fusegear
10.3
Busbar chambers
Eaton’s busbar chamber system is designed for wall-mounting installations. All units in the range share the same
height and depth dimensions. Similarly the twin busbars are located in precisely the same positions throughout
the range and vary in size only in their front-to-back dimensions according to rating. Detachable end plates
enable all units to be extended by coupling to a second busbar chamber using extension sets.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
157
10.3
Technical data
Enclosed switch & fusegear
Busbar chamber – dimensions
Nominal
Dimensions, mm
length, mm
ABCDE F G
550 900 1350 1800 562 912 1362 1812 364 364 364 364 222 222 222 222 280 280 280 280 474 824 1274 1724 –
–
–
862 4
4
4
6
Operational performance
• In accordance with BS EN 60947-3 all ratings have been tested to values specified below:
DescriptionCycles
Operating cycles without current
Operating cycles at rated current
158
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
8500
1500
Total10000
Technical data
Enclosed switch & fusegear
10.3
Exel 2 dimensions
Current
Dimensions, mm
rating, A
ABCDE F GHJ K
Switch-disconnectors
20 15919392 127112114– 5.6 38.534
32 1732451011371161141146.4 38.534
63 2303101291731521681686.7 58 54
100/125
3293671672102412212216.7 58 54
Switch-disconnector-fuses
20 21919392 127171114– 5.6 38.534
32 2672451011372091141146.4 38.534
63 3513101291732731681686.7 58 54
100/125
5033671672104162212216.7 58 54
Single hole fixing for 20A only
Performance values
Unit
Short time withstand current
(r.m.s. amps for 1 second)
Short circuit making capacity
(peak amps at 415v ac)
Rated fused short-circuit
(prospective r.m.s. amps at 415v ac)
20A
32A
63A
100/125A
640A
960A
2000A
3750A
2.96 kA
5.12 kA
6.62 kA
8.42 kA
80 kA
80 kA
80 kA
80 kA
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
159
10.3
Technical data
Enclosed switch & fusegear
Exel distribution fuseboards – diversity factors
No. of ways
Maximum rated operational current per way, Ie
200A100A63A 32A <20A
2–1–––
4 0.80.90.90.90.9
6 – 0.80.80.80.8
8 – 0.660.80.80.8
10–––0.66
–
12–––0.66
–
Therefore, incomer rating =
2––126A
––
4 640A360A227A115A72A
6 – 480A302A154A96A
8 – 528A403A205A128A
10–––211A
–
12–––253A
–
Exel distribution fuseboards – enclosure dimensions IP4X (mm)
Nominal
Poles
rating, Ie
Number of ways
20ASPN4
6
8
12
TPN4
6
8
32ASPN4
6
8
12
TPN4
6
8
10
12
63ATPN2
4
6
8
100A
TPN4
6
8
200A
TPN4
A
B
C
D crs
E crs
F dia.
3863041482521918
3863041482521918
3863681482522558
3864481482523358
6313041484421918
6313041484421918
6313681484422558
3863041482521918
3863041482521918
3863681482522558
3864961482523838
7103041485761918
7103041485761918
7103681485762558
7104481485763358
7104961485763838
54647322745836910
97233022788422610
97233022788422610
97247322788436910
106633022797822610
106654922797844510
106654922797844510
1560529270133432510
Exel distribution fuseboards – earth bar terminal capacities
Description
Nominal rating of fuseboard, Ie
20A32A63A100A200A
Main (stud)
Outgoing, mm2
M10M10M10M10M10
1010252570
160
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Enclosed switch & fusegear
10.3
Exel distribution fuseboards – main terminal stud sizes
Description
No. of
Nominal rating of fuseboard, Ie
ways
20A32A63A100A200A
SPN
TPN
4 M10M10– – –
6 M10M10– – –
8 M10M10– – –
12M10
––––
2––M12
––
3––M12
––
4 M10M10M12M12M16
6 M10M10M12M16–
8 M10M10M16M16–
10–M10
–––
12–M10
–––
1
Tunnel terminal 35mm2 max.
415V industrial fuselinks – offset bolted contacts, dimensions
Eaton list
number
Dimension, mm
A max. B max.
SA2
SA2M (25–40A)
SA2M (50–63A)
SB3
SB3M
SB4
SB4M
SO (80–100A)
SOM
SO (125–200A)
SD5
SD5M (125–160A)
SD5M (200A)
SD6
SD6M
341454110.844.5
4.8–
341454110.844.5
4.8–
3617.5
55111.244.5
4.8–
3514859 1.2735.58
5622869 1.2735.58
3517.5
869 1.2735.58
562288131.2735.510
552186131.2735.510
552691131.2735.510
473190193.2736.1–
5922110153.2949 –
5826109153.2949 11
4731110193.2949 10
4731110193.2949 10
4731110193.2949 10
D max.
E
F
G nom.
H
J
SB3, SB3M, SB4, SB4M, SD5M, SD6,
SD6M, SO (80–100A) & SOM types
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
161
10.3
Technical data
Enclosed switch & fusegear
415V industrial fuselinks – centre bolted contacts, dimensions
Fuse link
type
Dimensions, mm
A max. B max.
SE3
SF3
SE4
SF4
SE4M
SF4M
SF5
SF5M (125–160A)
SF5M200
SF6
SF6M
SF7
SF7 (315)
SF7M
SG7
SG7 (315)
SF8
SF8M
SH8
SH9
SY9
SH10
SY10
SJ11
5722114131.6977.110–
5722129141.61118.712–
5722114131.6977.110–
5722129141.61118.712–
5722114131.6977.110–
5821126143.21118.711–
5922127143.21118.711–
5826126143.21118.711–
4731136193.21119 12.5
–
4731136193.21119 12.5
–
4731136193.21119 12.5
–
4731136193.21119 12.5
–
5038136254.81119 12.5
–
5038136254.81119 12.5
–
4759158193.213310.5
12.5
–
5038209254.813310.5
12.5
25
5039136254.81119 12.5
–
7553135254.81119 12.5
–
5040209254.813310.5
12.5
25.4
8074209256.313310.5
1625.4
8074261386.316510.5
1632
8483209259.513310.5
1625.4
8083261386.316510.5
1632
83 10019863.59.5 14914.319 32
D max.
E
F
G nom.
H
J
L
Complete fuse units – dimensions
NominalDimensions, mmHole dia. (mm min) insulated stud
rating, In ABCDE F GHJ KL (types C and D)
20A
32A
32A clip-in
63A
63A clip-in
100A
Compact range
32A
63A
100A
200A
162
8779275063566 5.5– – – 12
109101316260786 5.512.7
6.4– 12
75–2557.7
––65.5
––4.4
–
118110357271798 5.512.7
6.4– 14.5
88.7
–31.5
66.34
––85.5
––4.8
–
1541545410880117106.51922– 18.5
877927––5665.5
–––12
109
101
31––7865.5
12.7
6.4
–12
118110357271798 5.512.7
6.4– 14.5
1541545410880117106.51922– 18.5
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Enclosed switch & fusegear
10.3
Local switch-disconnectors - rotary isolators, 20–63A, IP65, 3–8 poles
AC-23A Rating (kW)
AC-3 rating, motor load switch (kW)
Nominal unit
400V 3ph
230V 1ph
230V 230V star
400V 400V star delta Rated short-time rating Ie (A)
delta
withstand current
Icw 1s (A)
Terminal capacity
(flexible with
ferules) (mm2)
20
6.5
3.5
3
4
4
4.5
320
25
13
7
5.5
5.5
7.5
7.5
640
32
13
7.5
6.5
11
12
18.5
650
(3 & 3+N pole)
30
18.5
15
15
30
30
1260
(6 & 8 pole)
22
15
15
22
22
37
1300
1 x 0.75 - 1.5
2 x 0.75 - 1.5
1x1-4
2x1-4
1 x 0.75 - 4
2 x 0.75 - 4
1 x 1.5 - 25
2 x 1.5 - 6
1 x 1.5 - 25
2 x 1.5 - 10
Local switch-disconnectors - rotary isolators, 20–63A, IP65, 3–8 poles –dimensions
Eaton List Number
ABCDE F GHI
207149-GV 137120807535M20 - - 207151-GV 137120807535M20 - - 207153-GV 137120809535M20 - - 207161-GV 137120809535M20 - - 226902-GV 18016010080 35 M25 - M25≤ 8
227860-GV 18016010080 35 M25 - M25≤ 8
207202-GV 18016010010035 M25 - M25≤ 8
207210-GV 18016010010035 M25 - M25≤ 8
207212-GV 18016010010035 M25 - M25≤ 8
207348-GV
240
-
160
95
44
M25 / M32
M20
-
207349-GV
240
-
160
95
44
M25 / M32
M20
-
207350-GV
240
-
160
95
44
M25 / M32
M20
-
207246-GV 240
-160
160
44
- --207248-GV 240
-160
160
44
- --Dimensions (mm)
I ON
o
B
H
o
H
A
OFF
OFF
I
D
C
F
E
G
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
163
10.3
Technical data
Enclosed switch & fusegear
Rotary change over isolators, 20–63A, IP65, 4 poles AC-23A Rating (kW)
AC-3 rating, motor load switch (kW)
Nominal unit
400V 3ph
230V 1ph
230V 230V star
400V 400V star delta Rated short-time Terminal capacity
rating Ie (A)
delta
withstand current
(mm2)
Icw 1s (A)
20
6.5
3.5
3
4
4
5.5
320
32
13
7.5
6.5
11
12
18.5
650
63 22
15
15
22
22
37
1300
1 x 1 - 2.5
2 x 1 - 2.5
1 x 1- 6
2 x 1- 6
1 x 2.5 - 35
2 x 2.5 - 16
Local switch-disconnectors - rotary isolators, 20–63A, IP65, 3–8 poles –dimensions
Nominal unit
rating
Ie (A)
ABCDE F GHI
20
137120809527M20 - - 32
18016010010035 M25 - M25≤ 8
63
240- 16016029 M25 / M32 M20- -
Dimensions (mm)
I ON
o
B
H
o
H
A
OFF
OFF
I
D
C
F
164
G
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
E
Technical data
Enclosed motor, heating and lighting control
10.3
AC motors, 3 phase full load current table, 1450rpm approx.
Provided as a guide to the selection of suitable Eaton control gear
The tables are based on motors of approx, 1450 rpm of average efficiency and power factor. Motors of higher speed
than 1450 rpm usually take a lower current than that shown in the table; while motors of lower speed usually take
higher current. Wide variations from these figures can arise, especially on single phase motors and engineers should,
whenever possible, determine the actual full load current (F.L.C.) from the motor rating plate in each case
Motor rating
Approx F.L.C. at line voltage
kW 220V240V380V400–415V
550V
0.07
–––––
0.10.70.60.40.40.3
0.121 0.90.50.50.3
0.181.31.20.80.70.4
0.251.61.50.90.90.6
0.372.52.31.41.30.8
0.563.12.81.81.61.1
0.753.53.22 1.81.4
1.15 4.52.82.61.9
1.56.45.83.73.42.6
2.29.58.75.55 3.5
3 12117 6.54.7
3.715138 8 6
41614986
5.5201912118
7.52725161511
9.33432201814
103734222015
114137232216
156450312821
18.5
6762393626
227470433930
309991575241
AC motors, 1 phase full load current table, 1450rpm approx.
Motor rating
(kW)
Approx F.L.C. at line voltage
110V220V230–240V
0.07
0.1
0.12
0.18
0.25
0.37
0.56
0.75
1.1
1.5
2.2
3
3.7
4
5.5
7.5
2.41.21.1
3.31.61.5
3.81.91.7
4.52.32.1
5.82.92.6
7.93.93.6
11 5.55
15 7.36.7
21109
261312
371917
492422
542725
603027
854138
11055 50
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
165
10.3
Technical data
Enclosed motor, heating and lighting control
9kW DOL starter without switch disconnect, IP 65 moulded surface mounting enclosure, dimensional drawings
2 X 5.3mm DIA
Elongated Fixing Holes
4 X 21.5mm
Conduit Knockouts
150 mm 5.3
88 mm
11kW DOL starter without switch disconnect, IP 54 metalclad surface mounting enclosure, dimensional drawings
129.2 mm
(172 mm)
166
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
159.4 mm
(223 mm)
28.5 mm
(30.0 mm)
• Dimensions in brackets refer to type 2528ADS(2X) size enclosure
105.8 mm
(141mm)
140.0 mm
120.0 mm
150 mm
166 mm
20mm
50.5 mm
10.3
Technical data
Enclosed motor, heating and lighting control
11kW DOL starter without switch disconnect, IP 54 metalclad surface mounting enclosure, dimensional drawings (contd)
38 mm
(47 mm)
6-20mm
Conduit Knockout
(7-20/25mm
Conduit Knockout)
125.5 mm
(168.5 mm)
112 mm
(154 mm)
117.5mm
(165.0mm)
=
=
29 mm
(41.mm)
25 mm
18 mm
2 X 6.0 DIA Fixing Holes
(3 X 6.0 DIA Fixing Holes)
(80.0 mm Fixing Holes)
100 mm
(137 mm)
Dimensions in brackets refer to
types 2528ADS(2X) & 3228ADS(3X)
11kW DOL starter with switch disconnect, IP 54 metalclad surface mounting enclosure,
dimensional drawings
sized enclosures
221.5 mm
29mm
159.5 mm
34 mm
Outline and
Knockout Dimensions
154 mm
140mm
29 mm
)
185mm
Box Fixing Dimensions
171.5 mm
114 mm
4-6.0 Diameter
Fixing Holes
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
167
10.3
Technical data
Enclosed motor, heating and lighting control
11kW DOL reversing starter without switch disconnect, IP 54 metalclad surface mounting enclosure, dimensional drawings
• 8 X 20.9mm (3/4”) conduit knockouts are provided for cable entry at top,bottom and side of the enclosure and the earth
terminal may be reversed for external connection but the components must be assembled in the same order as supplied.
Outline and Knockout Dimensions
221.5 mm
34 mm
29mm
MEM
154 mm
166.5 mm
140mm
4-6.0 Diameter
Fixing Holes
114 mm
171.5 mm
29 mm
Box Fixing Dimensions
20 MM CONDUIT KNOCKOUTS
168
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Reverse
159.5 mm
Forward
Technical data
Enclosed motor, heating and lighting control
10.3
22kW Star Delta starter without switch disconnect, IP 54 metalclad surface mounting enclosure, dimensional drawings
• Star Delta starter enclosure (IP54 to BSEN60529:1992) 20.9mm (3/4”) conduit knockouts are provided
for cable entry at top, bottom and side of the enclosure and the earth terminal may be reversed for
external connection, but the components must be assembled in the same order as supplied.
221.5 mm
159.5 mm
34 mm
29 mm*
MEM
29 mm
(53 mm)
154 mm
166.5 mm
140 mm
(155 mm)
= =
Box Fixing Dimensions
171.5 mm
4 - 6.0 mm
Diameter
Fixing Holes
=
=
=
114 mm
=
STAR DELTA STARTER ENCLOSURE (IP54 to BSEN60529:1992).
8 X 20.9mm (3/4”) conduit knockouts are provided for cable entry at top, bottom and side of the enclosure and
The earth terminal may be reversed for external connection but the components must be assembled in the
same order as supplied.
OUTLINE AND KNOCKOUT DIMENSIONS
View shows type 28/48SDA2X18
Dimensions in brackets ( ) are for types
28/48SDA3X25 and 28/48SDA3X32
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
169
10.3
Technical data
Enclosed motor, heating and lighting control
11kW DOL starter without switch disconnect, moulded & metal surface mounting enclosure, wiring diagrams
A. Three phase motors-DOL starter. Local 3-wire (pushbutton) control.
Supply
17
18 A2
Start
Remote
Push
Buttons
Z
Y
A1
L1
L2
L3
A2
1
3
5
Stop
13
14
17
18
Start
96
2
4
Remote start/inch/stop control
97
O
Stop
98
95
6
Inch
X
Connect as above except remove lead
X and add connections shown.
Motor
B. Single phase motors-DOL starter. Local 3-wire (pushbutton) control.
17 18
Supply
Connect
Cable
N
A1
L
Start
Remote
Push
Buttons
Z
Y
A2
2
L1
L2
L3
1
3
5
4
N
13
14
Stop
17
18
Start
96
97
95
6
A2
X
98
Local & remote 3-wire
(pushbutton) control
O
Stop
Connect as above except remove lead
X and add connections shown.
L
Motor
Coil phase to neutral: remove connector Y, connect Neutral to A1
Separate coil supply: remove connectors Y and Z, connect coil supply to A1 and 96.
Coil voltage: Ensure correct voltage coil is fitted for separate coil supply and phase to neutral applications.
External interlock: Remove connection Z and insert interlock between 5 and 96.
Alarm circuit: At trip an alarm signal voltage equal to the coil voltage is available between 98 and A1
when a link is added between 96 & 97. The switch is rated at 440VA, 500V maximum.
Control circuit fuses (10A MAX).
Coil connected Phase to neutral (1 fuse): remove connector Z and connect fuse between 5 and 96.
Coil Connected Phase to Phase (2 fuses): remove connector Z and connect fuse between
5 and 96. Remove connector Y and connect fuse between 1 and A1.
Note: the voltage rating of the fuse(s) must be suitable for the control circuit voltage.
Short circuit protection: Maximum sizes of fuses or MCB’s to give short-circuit protection to this starter are tabulated on page 173.
To reverse direction of rotation (3-Phase Motors): Interchange any two supply lines 1, 3 or 5.
170
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Enclosed motor, heating and lighting control
10.3
11kW DOL starter with switch disconnect, IP 54 metalclad surface mounting enclosure, wiring diagrams
Three phase motors-DOL starter isolator local 3-wire (pushbutton) control
Supply
A1
Y
L1 L2 L3
1 3 5
A2
Z
Start
4
6
X
Isolator
Switch
97
96
Stop
98
Remote start/inch/stop control
Connect as above except remove lead
X and add connections shown
O
95
Inch
Stop
18
2
Start
Remote
Push
Buttons
13
17
14
18 A2
17
(L1) (L2) (L3)
1 3 5
Motor
Single phase motors-DOL starter isolator local 3-wire (pushbutton) control
Connect supply to 1 and 5 at the isolator. Connect motor to 4 and 6 at the
overload relay. Remove existing cable P and connect a cable of crosssectional area equal to the supply cable between 2 and 3 as shown.
Supply
Connect
Cable
A1
(L)
1
Y
L1 L2 L3
1 3 5
A2
Z
13
14 17
6
Start
Remote
Push
Buttons
Stop
Local & remote 3-wire
(pushbutton) control
Start
18
4
A2
P
96
2
(N)
5
17 18
95
X
Isolator
Switch
97
Connect as above except remove lead
X and add connections shown
O
98
Stop
Motor
Coil phase to neutral: remove connector Y, connect Neutral to A1
Separate coil supply: remove connectors Y and Z, connect coil supply to A1 and 96.
Coil voltage: Ensure correct voltage coil is fitted for separate coil supply and phase to neutral applications.
Control circuit fuses (10A MAX).
Coil connected Phase to neutral (1 fuse): remove connector Z and connect fuse between 5 and 96.
Coil Connected Phase to Phase (2 fuses): remove connector Z and connect fuse between
5 and 96. Remove connector Y and connect fuse between 1 and A1.
Note: the voltage rating of the fuse(s) must be suitable for the control circuit voltage.
External interlock: Remove connection Z and insert interlock between 5 and 96.
Alarm circuit: At trip an alarm signal voltage equal to the coil voltage is available between 98 and A1
when a link is added between 96 & 97. The switch is rated at 440VA, 500V maximum.
Short circuit protection: Maximum sizes of fuses or MCB’s to give short-circuit protection to this starter are tabulated on page 173.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
171
10.3
Technical data
Enclosed motor, heating and lighting control
11kW DOL reversing starter without switch disconnect, IP 54 metalclad surface mounting enclosure, wiring diagrams
Circuit Diagrams:- Power
Control
Remote Control Option
R
5
Z
3
4
2
F
5
6
1
3
2
5
4
17
53
6
R
18
R
2
4
17
R
R
54
18
54
21
21
F
22
A2
F
6
95
53
F
F
96
REMOTE PB
95
1
22
A2
OFF
17
ON(R)
ON(F)
R
A1
F
18
54
R
A1
A1 1
3
5
A1 1
3
53 63 17
F
4
6
22 A2
18
21
F
F
A1
ON F
OFF
A1
4
U
6
V
1
ON R
5
53
F
R
R
54
W
M
3
22
A2
Mechanical Interlock
Separate Supply of
Control Circuit
98 97 95 96
2
21
1 R
54 64 18
4 6 22 A2
2
R
54
R
A1
R
54 64 18
2
21
5
53 63 17
53
R
Mechanical Iinterlock
L3
21
17
22
A2
1 R
L2
REMOVE LINK FOR
REMOTE OPERATION
53
F
Y
L1
R
5
96
54
14
95
96
Option for Remote Control
Coil phase to neutral: Remove connector Y, connect Neutral to A1 F
Separate coil supply: Remove connectors Y and Z, connect coil supply to A1 R and 96.
Coil voltage: Ensure correct voltage coil is fitted for separate coil supply and phase to neutral applications.
Control circuit fuses (10A MAX).
Coil connected Phase to neutral (1 fuse): remove connector Z and connect fuse between 5 and 96.
Coil Connected Phase to Phase (2 fuses): remove connector Z and connect fuse between
5 and 96. Remove connector Y and connect fuse between 1 and A1 R.
Note: The voltage rating of the fuses must be suitable for the control circuit voltage.
External interlock: Remove connector Z and connect interlock between 5 and 96. When using
remote control, connect external interlock in series with remote 2 wire (switch control).
To reverse direction of rotation: (3 Phase Motors) interchange any two supply lines 1, 3 or 5.
Alarm circuit: At trip an alarm signal voltage equal to the coil voltage is available between 98 and A1
when a link is added between 96 and 97. The switch is rated at 400VA, 500V maximum.
Short circuit protection: Maximum sizes of fuses or MCB’s to give short-circuit protection to this starter are tabulated on page 173.
Limit Switch Connections
Forward limit: Remove connection between 54Forward and 21Reverse – connect limit switch between 54F and 21R.
Reverse limit: Remove connection between 54Reverse and 21Forward–- connect limit switch between 54R and 21F.
172
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
10.3
Technical data
Enclosed motor, heating and lighting control
25kW Star Delta starter without switch disconnect, IP 54 metalclad surface mounting enclosure, wiring diagram
Control
Circuit Diagram; Power
Remote Control Option
5
3
1
5
M
1
3
5
D
2
4
6
3
1
6
4
4
2
2
6
4
6
96
Remote PB
95
17
13
D
M
18
1
3
L2
5
55
M
2
4
6
3
5
1
3
S
D
2
4
S
6
2
4
4
M
21
67
21
A2
M
A1
A1
X
X
A1 1
M
A1
A2
A2
D
M
A1
A1
Y
1
D
1
ON
OFF
5
13
D
M
S
2. Coil Voltage different to Power
Voltage
Scheme A
3. Remote Control Option
Scheme B
S
22
A2
Y
Control Connections
to be made
21
S
A1
D
M
67
21
22
A2
U2 V2 W2
68
M
D
D
V2 W2 U2
1. Coil Voltage same as Power
Voltage
No Change
56
22
A2
6
55
S
22
6
54
M
D
S
2
68
56
5
U1 V1 W1
M
3
M
14
53
S
L3
Remove link for
Remote Operation
13
ON
54
1
95
OFF
14
53
Power Connections to be made
L1
D
Z
96
S
2
5
D
Z
5
D
54
S
14
A
95
96
B
X
Short circuit protection
Overload Relay list number
Motor FLC Ie (A)
Direct on line
8TT87
8TT88
8TT89
8TT90
8TT91
8TT98
8TT92
8TT93
8TT94
8TT104
Star Delta
8TT90SD
8TT91SD
8TT98SD
8TT92SD
8TT93SD
8TT94SD
8TT104SD
SCPD Back-up protection MAX HRC fuse BS88:1 aM (A)
Back-up protection
Max MCB Type C
0.63–14
1–1.66
1.6–2.510
2.5–416
4–616
5.5–8.020
7–1025
10–1332
13–1840
18–2550
EMCH306
EMCH306
EMCH306
EMCH310
EMCH310
EMCH316
EMCH320
EMCH320
EMCH332
EMCH340
4.3–6.916
6.9–10.416
9.5–13.820
12.1–17.325
17.3–22.532
22.5–3140
31–4350
EMCH310
EMCH310
EMCH316
EMCH320
EMCH320
EMCH332
EMCH340
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
173
10.3
Technical data
Enclosed motor, heating and lighting control
Heating and lighting contactors
(159.4 mm)
(223 mm)
(165 mm)
117.5 mm
21 mm
(34.5 mm)
6-20mm
Conduit Knockout
(7-20/25mm
Conduit Knockout)
(80 mm)
105.8 mm
(141 mm)
116.5mm
(125 mm)
2-Fixing Holes
6.3 mm DIA
(3-Fixing Holes
6.3 mm DIA)
Dimensions in brackets ( ) refer to 228ALDPR, 228ALCSPN/R, 428ALCFP/R, 448ALCFP, 428ALCDP/R,
TO:DIMENSIONS
428ALCSPN/R
. All others REFER
refer to list
numbers; 228ALCFP/R, 248ALCFP and 228ALCDP.
228ALCFP, 248ALCFP, 228ALCDP, 228ALCDPR *, 228ALCFPR
TO:( ) REFER
IN BRACKETS
DIMENSIONS
Additional
side mounting
auxilary contacts
for DOL,
DOL reversing, Star Delta starters and Autoline
428ALCFP, 448ALCFP, 428ALCDP, 428ALCDPR *, 428ALCSPN,
228ALCSPN,
• 1 NO,
1NC Ith 10A Ui228ALCSPNR*,
600v
428ALCSPNR
Description
*
Current rating Coil voltage
(A)
DOL Starter
25
DOL Starter
25
Starter with disconnector
18
Starter with disconnector
18
Starter with disconnector
25
Starter with disconnector
25
Reversing starter
18
Reversing starter
18
Reversing starter
25
Reversing starter
25
Star Delta starter
18
Star Delta starter
18
Star Delta starter
25
Star Delta starter
25
Autoline 4 pole
Autoline 4 pole with rectifier
174
220–240
380–415
220–240
380–415
220–240
380–415
220–240
380–415
220–240
380–415
220–240
380–415
220–240
380–415
230–240
230–240
Starter list number
Maximum side mount auxilaries
28ADS2X2
48ADS2X2
28ADSA1X2
48ADSA1X2
28ADSA2X1
48ADSA2X1
28ARD1X
1 reverse, 1 forward
48ARD1X
1 reverse, 1 forward
28ARD2X
1 reverse, 1 forward
48ARD2X
1 reverse, 1 forward
28SDA2X18
1 main, 1 star
48SDA2X18
1 main, 1 star
28SDA3X25
1 main, 1 star
48SDA3X25
1 main, 1 star
228ALCFP2
228ALCFPR1
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Eaton list
number
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
Technical data
Enclosed motor, heating and lighting control
10.3
Additional side mounting auxilary contacts for DOL, DOL reversing, Star Delta starters and Autoline (contd)
Description
Current rating Coil voltage
(A)
Autoline 4 pole
Autoline 2 pole
Autoline 2 pole with rectifier
Autoline 1 pole and neutral
Autoline 1 pole and neutral with rectifier Autoline 4 pole
Autoline 4 pole with rectifier
Autoline 4 pole
Autoline 2 pole
Autoline 2 pole with rectifier
Autoline 1 pole and neutral
Autoline 1 pole and neutral with rectifier Starter list number
Maximum side mount auxilaries
248ALCFP2
228ALCDP2
228ALCDPR1
228ALCSPN1
228ALCSPNR1
428ALCFP2
428ALCFPR1
448ALCFP2
428ALCDP2
428ALCDPR1
428ALCSPN1
428ALCSPNR1
400–415
230–240
230–240
230–240
230–240
230–240
230–240
400–415
230–240
230–240
230–240
230–240
Eaton list
number
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
8TA8DN11
Replacement front mounting auxiliary contacts for Star Delta
• 1 NO, 1NC Ith 10A Ui 600v
For Star Delta
Front mounting auxilary
Eaton list
number
28SDA2X18
8TA1DN11
28SDA2X25
8TA1DN11
28SDA2X32
8TA1DN11
48SDA2X18
8TA1DN11
48SDA2X25
8TA1DN11
48SDA2X32
8TA1DN11
Tightening torques for Star Delta and DOL starters
Starter type
Maximum starter
(Nm)
Relay tightening torque (Nm)
rating (kW)
Power
DOL
DOL
DOL
Star delta
Star delta
Star delta
1.851.21.71.2
1.851.2 1.851.85
2.51.22.51.2
1.851.21.71.2
1.851.2 1.851.85
2.51.22.51.2
9
11
15
15
22
25
Contactor tightening torque
Aux
Power Aux
Tightening torques for Autoline contactors
Starter type
Contactor tightening torque (Nm)
Power
228ALCFP1.7
248ALCFP1.7
428ALCFP2.5
448ALCFP2.5
228ALCFPR1.7
428ALCFPR2.5
228ALCDP3.0
428ALCDP3.5
228ALCDPR3.0
428ALCDPR3.0
228ALCSPN3.5
428ALCSPN4.0
228ALCSPNR4.0
428ALCSPNR4.0
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
175
10.3
Technical data
Enclosed motor, heating and lighting control
8TT series, overload relay tripping characteristics
Balanced operation, 3–phase, from cold state
Balanced operation, 3–phase, after a long period at the set current (hot state)
Operation following the loss of one phase (single phase tripping) from cold state
176
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Enclosed motor, heating and lighting control
10.3
Contactor utilisation category, AC1 (Ue_<440v) electrical life curve
Contactor utilisation category, AC2 (Ue_<440v) electrical life curve
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
177
10.3
Technical data
Enclosed motor, heating and lighting control
Contactor utilisation category, AC3 (Ue_<440v) electrical life curve
178
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Enclosed motor, heating and lighting control
10.3
80
M20
66.5
M20
44
MSU pushbutton control units (moulded IP66) dimensions
M4
C
33
b
a
56
17.8
M20/M25
M20
48
d (max button height)
M20
Dimensions a (mm)
Dimensions b (mm)
Dimensions c (mm)
Dimensions Cable entries
d (mm)
Eaton list number
72
72
72
72
72
72
120
120
153
42.6
42.6
42.6
42.6
42.6
42.6
85.6
85.6
118.6
58.5
58.5
58.5
58.5
58.5
58.5
106.5
106.5
139.5
10
16.4
20.6
20.6
48
48
16.4
48
48
M21MSSU
M21MSU
M21MSU2K
M21MSU2SK
M21MSULK
M21MSUML
M22MSU
M22MSUL
M23MSUL
2 x M16
2 x M16
2 x M16
2 x M16
2 x M16
2 x M16
2 x M20
2 x M20
2 x M20
3 x M20
3 x M20
3 x M20
3 x M20
3 x M20
3 x M20
3 x M20
3 x M20
2 x M25
2 x M25
2 x M25
2 x M25
2 x M25
2 x M25
2 x M25
2 x M25
2 x M25
4 x M20
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
a
179
10.4
Technical data
Power factor correction capacitors
Non-auto capacitor dimensions
C
FIXING HOLES
12mm DIA
A
D
E
B
KVAR (415V)
ABCDE
25
50
75
100
190190376212245
190190376212245
346190628405435
346190628405435
Non-auto capacitor specification
Manufacturing standards:
IEC 61439-2, IEC 60439-1
Voltage range:
Standard voltage 400V capacitors suitable for use on other voltages (200–660V) supplied on request
Frequency range:
50Hz or 60Hz (dependent on customer specification)
Phases:
3 phase (single phase on request)
Terminals:
3 Terminal standard (2 and 6 on request)
Discharge resistors:
Fitted as standard and permanently connected across the capacitor terminals
Customer connections:
By means of M4, 6, 8, 10, 12 brass set screws. The size of screw dependent on capacitor size
Case material:
Zinc plated steel
Case thickness:
1mm
Location:
Interior (exterior cases are available on request)
Protection:IP21
Ambient temperature:
–25° +40°C
Losses (including discharge resistors):
Less than 0.5 watts/kvar
Cubicle paint colour:
Light grey RAL 7035
Variations to above specifications available on request.
180
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Power factor correction capacitors
10.4
100 capacitor dimensions
G
C
FIXING HOLES
12mm DIA
G
C
FIXING HOLES
12mm DIA
D
E
D
B
A
E
F
KVAR (415V)
25
B
F
50
75
100
ABCDE F G
A
400200905425245253n/a
400200905425455253n/a
390350980425455403215
390350980425455403215
100 capacitor specification
Manufacturing standards:
IEC 61439-2, IEC 60439-1
Voltage range:
Standard voltage 400V capacitors suitable for use on other voltages (200–660V) supplied on request
Frequency range:
50Hz or 60Hz (dependent on customer specification)
Phases:
3 phase (single phase on request)
Terminals:
3 terminal standard (2 and 6 on request)
Discharge resistors:
Fitted as standard and permanently connected across the capacitor terminals
Customer connections:
By means of M4, 6, 8, 10, 12 brass set screws. The size of screw dependent on capacitor size
Case material:
Zinc plated steel
Case thickness:
1mm
Location:
Interior (exterior cases are available on request)
Protection:IP21
Ambient temperature:
–25° +40°C
Losses (including discharge resistors):
Less than 0.5 watts/kvar
Cubicle paint colour:
Light grey RAL 7035
Variations to above specifications available on request.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
181
10.4
Technical data
Power factor correction capacitors
300 standard cubicle dimensions
G
J
F
C
D
FIXING HOLES
16mm DIA
H
B
A
E
KVAR (415V)
ABCDE1)F GHJ
125
150
175
200
225
250
275
300
60060021002000680455487440430
60060021002000680455487440430
60060021002000680455487440430
60060021002000680455487440430
60060021002000680455487440430
60060021002000680455487440430
60060024002300680455487440430
60060024002300680455487440430
1)
Not applicable for direct connection
300 standard cubicle specifications
Manufacturing standards:
Voltage Range:
Frequency range:
Cable chamber and customer cable entry arrangements:
Cubicle material:
Earthing:
Fixing:
Protection:
Ambient temperature:
IEC 61439-2, IEC 60439-1
Standard operating voltages 380/400/415Vac, 3ph
50Hz (60Hz rating on request)
Undrilled detachable gland plate. Top or bottom entry as required.
2mm mild steel enclosure (1.6mm doors) painted light grey - RAL 7035 (other colours dependant on customer specification)
Internal earth bar linked to framework.
Floor fixing by means of 4 x 16mm diameter holes per cubicle.
IP31 indoor. (IP42 on request – Derating may be required)
-25°C +55°C.
Variations to above specifications available on request.
Terminal compartment
A terminal compartment is fitted as standard complete
with suitably rated incoming connection points*.
Alternatively, an incoming protective device
can be fitted to the incoming section.
The device can be fitted to the top or bottom of the capacitor bank.
A detachable undrilled gland plate is fitted as standard.
To accept top or bottom cable entry. Cable entry
will be bottom, unless otherwise specified.
* Accomodation of oversized cables is available, if specified.
182
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
Technical data
Power factor correction capacitors
10.4
300 detuned cubicle dimensions
G
J
F
C
D
FIXING HOLES
16mm DIA
H
B
A
E
KVAR (415V)
ABC DE1)F GHJ
100
125
150
175
200
225
250
275
300
325
350
375
400
425
450
475
500
525
550
575
600
60060024002300680455487440430
60060024002300680455487440430
60060024002300680455487440430
120060024002300680455487440430
120060024002300680455487440430
120060024002300680455487440430
120060024002300680455487440430
120060024002300680455487440430
120060024002300680455487440430
120060024002300680455487440430
120060024002300680455487440430
120060024002300680455487440430
120060024002300680455487440430
180060024002300680455487440430
180060024002300680455487440430
180060024002300680455487440430
180060024002300680455487440430
180060024002300680455487440430
180060024002300680455487440430
180060024002300680455487440430
180060024002300680455487440430
1)
Not applicable for direct connection
300 detuned cubicle specifications
Manufacturing standards:
Voltage range:
Frequency range:
Cable chamber and customer cable entry arrangements:
Cubicle material:
Earthing:
Fixing:
Protection:
Ambient temperature:
IEC 61439-2, IEC 60439-1
Standard operating voltages 380/400/415Vac, 3ph
50Hz (60Hz rating on request)
Undrilled detachable gland plate. Top or bottom entry as required
2mm mild steel enclosure (1.6mm doors) painted light grey - RAL 7035 (other colours dependant on customer specification)
Internal earth bar linked to framework
Floor fixing by means of 4 x 16mm diameter holes per cubicle
IP31 indoor. (IP42 on request – derating may be required)
-25°C +55°C
Variations to above specifications available on request.
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
183
10.5
Technical data
Degrees of protection – IP
The degrees of protection against ingress of foreign bodies
and liquids are indicated by the first two characteristic
numerals as detailed in tables 1 and 2. For switch and
control gear the classification is recognised internationally
and is described in detail in BS EN 60529.
First number
Protection against solid foreign objects
IP
Requirements
Meaning protection of persons against
access to hazardous parts with:
0
1
2
3
4
5
6
non-protected
back of hand
finger
No protection
Full penetration of 50mm diameter sphere not allowed. Contact with hazardous parts not permitted
Full penetration of 12.5mm diameter sphere not allowed
The jointed test finger shall have adequate clearance from hazardous parts
The access probe of 2.5mm diameter shall not penetrate
The access probe of 1.0mm diameter shall not penetrate
Limited ingress of dust permitted (no harmful deposit)
Totally protected against ingress of dust
tool
wire
wire
wire
Second number
Protection against harmful ingress of water
IPRequirements
Meaning protection from water
0
1
2
3
4
5
6
7
No protection.
Protected against vertically falling drops of water – limited ingress permitted
Protected against vertically falling drops of water
with enclosure tilted 15° from the vertical – limited ingress permitted
Protected against sprays to 60° from the vertical – limited ingress permitted
Protected against water splashed from all directions – limited ingress permitted
Protected against low pressure jets of water from all directions – limited ingress permitted
Protected against strong jets of water – limited ingress permitted
Protected against the effects of immersion between 15cm and 1m
non-protected
vertically dripping
dripping up to 15° from the vertical
8
Protected against long periods of immersion under pressure
continuous immersion
limited spraying
splashing from all directions
hosing jets from all directions
strong hosing jets from all directions.
temporary immersion
Additional letter
(Optional)
IP
Requirements
Meaning protection of persons against
access to hazardous parts with:
A for use with O
B for use with 0 & 1
Penetration of 50mm diameter sphere up to guard face must not contact hazardous parts.
Test finger penetration to a maximum of 80mm must not contact hazardous parts.
back of hand
finger
C for use with 1 & 2
D for use with 1, 2 & 3 Wire of 2.5mm diameter x 100mm long must not contact
hazardous parts when spherical stop face is partially entered.
Wire of 1.0mm diameter x 100mm long must not contact
hazardous parts when spherical stop face is partially entered.
tool
Note: limited penetration allowed with all four additional letters.
184
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
wire
Indices
Eaton list number index
131669...................................................................................40
158053...................................................................................40
158056...................................................................................40
167375...................................................................................58
167376...................................................................................59
167377...................................................................................58
167378...................................................................................58
167379...................................................................................56
167380...................................................................................57
167381...................................................................................56
167382...................................................................................56
167383...................................................................................56
167384...................................................................................60
167385...................................................................................60
167386...................................................................................60
167387...................................................................................60
167389...................................................................................55
167390...................................................................................55
167391...................................................................................55
167392...................................................................................55
167398...................................................................................55
169584.............................................................................39, 50
169585.............................................................................39, 50
169586.............................................................................39, 50
169587.............................................................................39, 50
169588.............................................................................39, 50
169589.............................................................................39, 50
169590.............................................................................39, 50
169591.............................................................................39, 50
169592.............................................................................39, 50
169593.............................................................................39, 50
169594..............................................................................39,50
169598.............................................................................39, 50
169599.............................................................................39, 50
169600.............................................................................39, 50
169601.............................................................................39, 50
169602.............................................................................39, 50
169603.............................................................................39, 50
169604.............................................................................39, 50
169605.............................................................................39, 50
169606.............................................................................39, 50
169607.............................................................................39, 50
169608..............................................................................39,50
169609.............................................................................39, 50
169610.............................................................................39, 50
169611.............................................................................39, 50
169612.............................................................................39, 50
169613.............................................................................39, 50
169614.............................................................................39, 50
169618.............................................................................39, 50
169619.............................................................................39, 50
169620.............................................................................39, 50
169621.............................................................................39, 50
169636.............................................................................39, 50
169637.............................................................................39, 50
169638.............................................................................39, 50
169639.............................................................................39, 50
169640.............................................................................39, 50
169641.............................................................................39, 50
169642.............................................................................39, 50
169643.............................................................................39, 50
169644.............................................................................39, 50
169645.............................................................................39, 50
169646.............................................................................39, 50
169647.............................................................................39, 50
169648.............................................................................39, 50
169649.............................................................................39, 50
169650.............................................................................39, 50
169651.............................................................................39, 50
169652.............................................................................39, 50
169670.............................................................................39, 50
169671.............................................................................39, 50
259471...........................................................67, 71, 75, 79, 83
259499.......................................................................75, 79, 83
259744...........................................................67, 71, 75, 79, 83
259763...........................................................67, 71, 75, 79, 83
260199...........................................................67, 71, 75, 79, 83
260201...........................................................67, 71, 75, 79, 83
1 SCHF..................................................................................112
100 SCHF..............................................................................112
1000MEB..............................................................................101
1000SJ11.............................................................................108
1004R...................................................................................108
1004RL.................................................................................108
1004XTNC............................................................................103
1006XTNC............................................................................103
1008XTNC............................................................................103
100AXD2..............................................................................100
100AXTN2............................................................................100
100CMFB..............................................................................112
100CMFC..............................................................................112
100JCS82.............................................................................111
100JCS92.............................................................................111
100KXDC2F..........................................................................100
100KXSC2F...........................................................................100
100KXTNC2F........................................................................100
100MBDEBSP.......................................................................101
100MFA................................................................................112
100MFB................................................................................112
100MFC................................................................................112
100MFLK......................................................................103, 112
100SD5.................................................................................106
100SD5M125.......................................................................106
100SD5M160.......................................................................106
100SD5M200.......................................................................106
100SF5.................................................................................107
100SF5M125........................................................................107
100SF5M160........................................................................107
100SF5M200........................................................................107
100SO...................................................................................106
100SOM125.........................................................................106
100SOM160.........................................................................106
101GNC..................................................................................94
102GCEBSP............................................................................97
103GNC..................................................................................94
103GNL..................................................................................94
104GC.....................................................................................94
10LS.....................................................................................110
10SA2...................................................................................106
10SB3...................................................................................106
10SE3...................................................................................107
10SF3...................................................................................107
10SN2..................................................................................108
10SS.....................................................................................110
11 BBMS................................................................................99
1250SJ11.............................................................................108
125AXTN2............................................................................100
125JCS82.............................................................................111
125JCS92.............................................................................111
125KXTNC2F........................................................................100
125SD6.................................................................................107
125SF6.................................................................................107
125SO...................................................................................106
142 BBC..................................................................................98
143 BBC..................................................................................98
144 BBC..................................................................................98
146 BBC..................................................................................98
151GNC..................................................................................94
153GNC..................................................................................94
154GC.....................................................................................94
154R.....................................................................................108
15AXD2................................................................................100
15AXTN2..............................................................................100
15KXDC2F............................................................................100
15KXSC2F.............................................................................100
15KXTNC2F..........................................................................100
160JCS82.............................................................................111
160JCS92.............................................................................111
160SD6.................................................................................107
160SF6.................................................................................107
160SO...................................................................................106
16LS.....................................................................................110
16SA2...................................................................................106
16SB3...................................................................................106
16SE3...................................................................................107
16SF3...................................................................................107
16SN2..................................................................................108
16SP.....................................................................................108
16SS.....................................................................................110
1CLX.....................................................................................103
1PCB.......................................................................................95
2 BBCL....................................................................................99
2 SCHF..................................................................................112
200 FSCS................................................................................98
2004XTNC............................................................................103
200CMFB..............................................................................112
200JCS82.............................................................................111
200JCS92.............................................................................111
200SD6.................................................................................107
200SD6M250.......................................................................107
200SD6M315.......................................................................107
200SF6.................................................................................107
200SF6M250........................................................................107
200SF6M315........................................................................107
200SO...................................................................................106
201GNC..................................................................................94
202GCEBSP............................................................................97
203GNC..................................................................................94
203GNL..................................................................................94
204GC.....................................................................................94
204R.....................................................................................108
204XSNC..............................................................................103
204XTNC..............................................................................103
206XSNC..............................................................................103
206XTNC..............................................................................103
207136-GV...........................................................................102
207149-GV...........................................................................102
207151-GV...........................................................................102
207153-GV...........................................................................102
207161-GV...........................................................................102
207191-GV...........................................................................102
207202-GV...........................................................................102
207210-GV...........................................................................102
207212-GV...........................................................................102
207230-GV...........................................................................102
207246-GV...........................................................................102
207248-GV...........................................................................102
207348-GV...........................................................................102
207349-GV...........................................................................102
207350-GV...........................................................................102
208XSNC..............................................................................103
208XTNC..............................................................................103
20LS.....................................................................................110
20MFA..................................................................................112
20MFB..................................................................................112
20MFC..................................................................................112
20SA2...................................................................................106
20SA2M25...........................................................................106
20SA2M32...........................................................................106
20SB3...................................................................................106
20SE3...................................................................................107
20SF3...................................................................................107
20SN2..................................................................................108
20SN2M25...........................................................................108
20SN2M32...........................................................................108
20SP.....................................................................................108
20SS.....................................................................................110
21 BBMS................................................................................99
2100AXEBSP........................................................................101
212XSNC..............................................................................103
226902-GV...........................................................................102
227860-GV...........................................................................102
228ALCDP............................................................................119
228ALCDPR..........................................................................119
228ALCFP.............................................................................119
228ALCFPR...........................................................................119
228ALCSPN..........................................................................119
228ALCSPNR........................................................................119
230AXEBSP..........................................................................101
230KXEBSP..........................................................................101
242 BBC..................................................................................98
243 BBC..................................................................................98
244 BBC..................................................................................98
246 BBC..................................................................................98
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
185
Indices
Eaton list number index
248ALCFP.............................................................................119
250JCS82.............................................................................111
250JCS92.............................................................................111
250SF7.................................................................................107
250SG7.................................................................................107
25LS.....................................................................................110
25SA2...................................................................................106
25SB3...................................................................................106
25SE3...................................................................................107
25SF3...................................................................................107
25SN2..................................................................................108
25SP.....................................................................................108
25SS.....................................................................................110
60AXEBSP............................................................................101
260KXEBSP..........................................................................101
28ADS1X..............................................................................116
28ADS2X..............................................................................116
28ADSA1X...........................................................................116
28ADSA2X...........................................................................116
28ADSM1X..........................................................................116
28ARD1X..............................................................................116
28ARD2X..............................................................................116
28SDA2X18..........................................................................117
28SDA3X25..........................................................................117
2LS.......................................................................................110
2PCB.......................................................................................95
2SA2.....................................................................................106
2SB3.....................................................................................106
2SE3.....................................................................................107
2SF3.....................................................................................107
2SN2....................................................................................108
2SS.......................................................................................110
3 BBCL....................................................................................99
3 SCHF..................................................................................112
303GNC..................................................................................94
304GC.....................................................................................94
304R.....................................................................................108
304RL...................................................................................108
304XSNC..............................................................................103
304XTNC..............................................................................103
306XSNC..............................................................................103
306XTNC..............................................................................103
308XSNC..............................................................................103
308XTNC..............................................................................103
30AXD2................................................................................100
30AXTN2..............................................................................100
30KXDC2F............................................................................100
30KXSC2F.............................................................................100
30KXTNC2F..........................................................................100
31 BBMS................................................................................99
310XTNC..............................................................................103
312XSNC..............................................................................103
312XTNC..............................................................................103
315JCS82.............................................................................111
315SF7.................................................................................107
315SF7M400........................................................................107
315SG7.................................................................................107
32CFF....................................................................................113
32CFFW................................................................................113
32CMFB................................................................................112
32LS.....................................................................................110
32MFA..................................................................................112
32MFB..................................................................................112
32MFD..................................................................................113
32SA2...................................................................................106
32SA2M40...........................................................................106
32SA2M50...........................................................................106
32SA2M63...........................................................................106
32SB3...................................................................................106
32SB3M40...........................................................................106
32SB3M50...........................................................................106
32SB3M63...........................................................................106
32SD5...................................................................................106
32SE3...................................................................................107
32SF3...................................................................................107
32SN2..................................................................................108
32SN2M40...........................................................................108
32SN2M50...........................................................................108
186
32SN2M63...........................................................................108
32SP.....................................................................................108
32SS.....................................................................................110
355JCS82.............................................................................111
355JCS92.............................................................................111
355SF8.................................................................................108
355SH8.................................................................................108
35SB4...................................................................................106
3PCB.......................................................................................95
4 BBCL....................................................................................99
400 FSCS................................................................................98
400JCS82.............................................................................111
400JCS92.............................................................................111
400SF8.................................................................................108
400SF8M500........................................................................108
400SH8.................................................................................108
402GCEBSP............................................................................97
403GNC..................................................................................94
403GNL..................................................................................94
404GC.....................................................................................94
404R.....................................................................................108
405 APL..................................................................................96
406 APL..................................................................................96
40SB4...................................................................................106
40SD5...................................................................................106
40SE4...................................................................................107
40SF4...................................................................................107
40SP.....................................................................................108
41 BBMS................................................................................99
428ALCDP............................................................................119
428ALCDPR..........................................................................119
428ALCFP.............................................................................119
428ALCFPR...........................................................................119
428ALCSPN..........................................................................119
428ALCSPNR........................................................................119
442 BBC..................................................................................98
443 BBC..................................................................................98
444 BBC..................................................................................98
446 BBC..................................................................................98
448ALCFP.............................................................................119
450JCS92.............................................................................111
450SH9.................................................................................108
450SY9.................................................................................108
454R.....................................................................................108
48ADS1X..............................................................................116
48ADS2X..............................................................................116
48ADSA1X...........................................................................116
48ADSA2X...........................................................................116
48ADSM1X..........................................................................116
48ARD1X..............................................................................116
48ARD2X..............................................................................116
48SDA2X18..........................................................................117
48SDA3X25..........................................................................117
4LS.......................................................................................110
4PCB.......................................................................................95
4SA2.....................................................................................106
4SB3.....................................................................................106
4SE3.....................................................................................107
4SF3.....................................................................................107
4SN2....................................................................................108
4SS.......................................................................................110
5 BBCL....................................................................................99
50 CSB....................................................................................95
50 CSBA ................................................................................95
500JCS92.............................................................................111
500SH9.................................................................................108
500SY9.................................................................................108
503GNC..................................................................................94
504GC.....................................................................................94
504R.....................................................................................108
505 APL..................................................................................96
506 APL..................................................................................96
507 APL..................................................................................96
509 APL..................................................................................96
50CSBA..................................................................................95
50SB4...................................................................................106
50SD5...................................................................................106
50SE4...................................................................................107
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
50SF4...................................................................................107
50SP.....................................................................................108
51 BBMS................................................................................99
560JCS92.............................................................................111
560SH9.................................................................................108
5PCB.......................................................................................95
6 BBCL....................................................................................99
6 SCHF..................................................................................112
60 CSB....................................................................................95
60 CSBA ................................................................................95
600MEB................................................................................101
602XTNC..............................................................................103
603GNC..................................................................................94
603GNL..................................................................................94
604GC.....................................................................................94
604R.....................................................................................108
604RL...................................................................................108
604XTNC..............................................................................103
606XTNC..............................................................................103
608XTNC..............................................................................103
60AXD2................................................................................100
60AXTN2..............................................................................100
60CSBA..................................................................................95
60KXDC2F............................................................................100
60KXSC2F.............................................................................100
60KXTNC2F..........................................................................100
61 BBMS................................................................................99
61GNC....................................................................................94
630JCS92.............................................................................111
630SH9.................................................................................108
630SY9.................................................................................108
637 APL..................................................................................96
639 APL..................................................................................96
63CFF....................................................................................113
63CFFW................................................................................113
63CMFB................................................................................112
63GNC....................................................................................94
63GNL....................................................................................94
63JCS82...............................................................................111
63JCS92...............................................................................111
63MFA..................................................................................112
63MFB..................................................................................112
63MFC..................................................................................112
63MFD..................................................................................113
63SB4...................................................................................106
63SB4M100.........................................................................106
63SB4M80...........................................................................106
63SD5...................................................................................106
63SE4...................................................................................107
63SE4M100..........................................................................107
63SE4M80............................................................................107
63SF4...................................................................................107
63SF4M100..........................................................................107
63SF4M80............................................................................107
63SP.....................................................................................108
643 BBC..................................................................................98
644 BBC..................................................................................98
646 BBC..................................................................................98
64GC.......................................................................................94
6LS.......................................................................................110
6SA2.....................................................................................106
6SB3.....................................................................................106
6SE3.....................................................................................107
6SF3.....................................................................................107
6SN2....................................................................................108
6SS.......................................................................................110
70CSB ....................................................................................95
70CSBA .................................................................................95
710JCS92.............................................................................111
710SH10...............................................................................108
710SY10...............................................................................108
757 APL..................................................................................96
759 APL..................................................................................96
800 FSCS................................................................................98
800JCS92.............................................................................111
800SH10...............................................................................108
800SY10...............................................................................108
802GCC..................................................................................96
Indices
Eaton list number index
803GNC..................................................................................94
803GNL..................................................................................94
804GC.....................................................................................94
804R.....................................................................................108
804RL...................................................................................108
80JCS82...............................................................................111
80JCS92...............................................................................111
80SD5...................................................................................106
80SF5...................................................................................107
80SO.....................................................................................106
81 BBL....................................................................................98
82 BBSK.................................................................................99
843 BBC..................................................................................98
844 BBC..................................................................................98
846 BBC..................................................................................98
8TT104.................................................................................117
8TT104SD.............................................................................117
8TT87...................................................................................117
8TT88...................................................................................117
8TT89...................................................................................117
8TT90...................................................................................117
8TT90SD...............................................................................117
8TT91...................................................................................117
8TT91SD...............................................................................117
8TT92...................................................................................117
8TT92SD...............................................................................117
8TT93...................................................................................117
8TT93SD...............................................................................117
8TT94...................................................................................117
8TT94SD...............................................................................117
8TT98...................................................................................117
8TT98SD...............................................................................117
90 CSB ...................................................................................95
90 CSBA ................................................................................95
90CSBA..................................................................................96
9LD.......................................................................................103
ASALMSN..............................................................................51
ASAUXSN..............................................................................51
ASPDL........................................................................34, 40, 51
ASPDL27..........................................................................40, 51
ASSNTSN110.........................................................................51
ASSNTSN415.........................................................................51
ASUVRSC230.........................................................................51
CR2002230.............................................................................61
CR2002230A..........................................................................61
CR2011230.............................................................................61
CR2011230A..........................................................................61
CR2020230.............................................................................61
CR2020230A..........................................................................61
CR2504230.............................................................................61
CR2504230A..........................................................................61
CR2522230.............................................................................61
CR2522230A..........................................................................61
CR2530230.............................................................................61
CR2530230A..........................................................................61
CR2540230.............................................................................61
CR2540230A..........................................................................61
CR4002230.............................................................................61
CR4020230.............................................................................61
CR4030230.............................................................................61
CR4040230.............................................................................61
CR6320230.............................................................................62
CR6340230.............................................................................62
CRA611..................................................................................62
CRA620..................................................................................62
CRM2020230A.......................................................................62
CRM2540230A.......................................................................62
CV1109SP.............................................................................101
EAM10...................................................................................32
EAM1002H.............................................................................48
EAM1002L..............................................................................48
EAM1002M............................................................................48
EAM1004H.............................................................................48
EAM1004L..............................................................................48
EAM1004LT............................................................................48
EAM1004M............................................................................48
EAM12M................................................................................32
EAM12MB..............................................................................32
EAM13...................................................................................32
EAM16...................................................................................32
EAM162H...............................................................................48
EAM162V...............................................................................48
EAM252H...............................................................................48
EAM252L................................................................................48
EAM252M..............................................................................48
EAM4.....................................................................................32
EAM402H...............................................................................48
EAM402L................................................................................48
EAM402M..............................................................................48
EAM404H...............................................................................48
EAM404L................................................................................48
EAM404M..............................................................................48
EAM632H...............................................................................48
EAM632M..............................................................................48
EAM634H...............................................................................48
EAM634L................................................................................48
EAM634M..............................................................................48
EAM7.....................................................................................32
EAM802H...............................................................................48
EAM802L................................................................................48
EAM802M..............................................................................48
EAM804H...............................................................................48
EAM804L................................................................................48
EAM804M..............................................................................48
EAM9M..................................................................................32
EAM9MB................................................................................32
EAMBT1002.....................................................................32, 42
EAMCK...................................................................................34
EAME11.................................................................................34
EAME5...................................................................................34
EAMMP65..............................................................................32
EAMP10.................................................................................42
EAMP13.................................................................................42
EAMP16.................................................................................42
EAMP4...................................................................................42
EAMP7...................................................................................42
EAMS100HE.....................................................................32, 42
EAMS100LE.....................................................................32, 42
EAMS100ME....................................................................32, 42
EAMS1251N....................................................................32, 42
EAMSL66M............................................................................32
EAMSL66MB..........................................................................32
EAMSL93M............................................................................32
EAMSL93MB..........................................................................32
EBK105SP...............................................................................97
EBK110SP...............................................................................97
EBK113SP...............................................................................97
EBLB1.....................................................................................40
EBLB2.....................................................................................40
EBM121..................................................................................35
EBM121D...............................................................................35
EBM122..................................................................................35
EBM122H...............................................................................35
EBM161..................................................................................35
EBM182..................................................................................35
EBM182H...............................................................................35
EBM22H.................................................................................35
EBM242..................................................................................35
EBM242H...............................................................................35
EBM41....................................................................................35
EBM61....................................................................................35
EBM62H.................................................................................35
EBM81....................................................................................35
EBM82H.................................................................................35
EBMBT2503.........................................................35, 36, 42, 43
EBMCC1253...........................................................................35
EBMGP4.................................................................................40
EBMMB160......................................................................36, 43
EBMMB200......................................................................36, 43
EBMMB250......................................................................36, 43
EBMMPCT250........................................................................36
EBMMPCT250M....................................................................36
EBMMPCT250MID.................................................................36
EBMMPDC120.......................................................................36
EBMMPSL125........................................................................36
EBMMPSL125M.....................................................................36
EBMMPSL250........................................................................36
EBMMPSL250M.....................................................................36
EBMNE8.................................................................................40
EBMP121................................................................................42
EBMP122................................................................................42
EBMP182................................................................................42
EBMP242................................................................................42
EBMP41..................................................................................42
EBMP61..................................................................................42
EBMP81..................................................................................42
EBMR100.........................................................................35, 42
EBMR30...........................................................................35, 42
EBMR300.........................................................................35, 42
EBMR300T.......................................................................35, 42
EBMS1251N.....................................................................35, 42
EBMS1253.......................................................................35, 42
EBMS1253N.....................................................................35, 42
EBMS25...........................................................................36, 43
EBMS2503.............................................................................36
EBMSL1082MPMB................................................................36
EBMSL14102MPMB..............................................................36
EBMSL642MPMB..................................................................36
EBMSL862MPMB..................................................................36
EBMTK...................................................................................40
EBMXDC15.............................................................................41
EBMXDC18.............................................................................41
EBMXDC30.............................................................................41
EBMXDC45.............................................................................41
EBMXDC6...............................................................................41
EBMXDC9...............................................................................41
EBMXDCG15..........................................................................41
EBMXE15...............................................................................41
EBMXPC1...............................................................................40
EBMXPC2...............................................................................40
EM3SSK1T2...........................................................................32
EM3SSK3T12.........................................................................36
EM3SSK3T2...........................................................................36
EM96BP..........................................................69, 73, 77, 81, 85
EMABP.......................................................................34, 40, 41
EMBH101...................................................................33, 37, 46
EMBH101N............................................................................46
EMBH102...................................................................33, 37, 46
EMBH102N............................................................................46
EMBH104...................................................................33, 37, 46
EMBH104N............................................................................46
EMBH106...................................................................33, 37, 46
EMBH106N............................................................................46
EMBH106R100C.....................................................................49
EMBH106R10C.......................................................................49
EMBH106R30C...........................................................33, 38, 49
EMBH108...................................................................33, 37, 46
EMBH108N............................................................................46
EMBH110...................................................................33, 37, 46
EMBH110N............................................................................46
EMBH110R100C.....................................................................49
EMBH110R10C.......................................................................49
EMBH110R30C...........................................................33, 38, 49
EMBH113...................................................................33, 37, 46
EMBH113N............................................................................46
EMBH116...................................................................33, 37, 46
EMBH116N............................................................................46
EMBH116R100C.....................................................................49
EMBH116R10C.......................................................................49
EMBH116R30C...........................................................33, 38, 49
EMBH120...................................................................33, 37, 46
EMBH120N............................................................................46
EMBH120R100C.....................................................................49
EMBH120R10C.......................................................................49
EMBH120R30C...........................................................33, 38, 49
EMBH125...................................................................33, 37, 46
EMBH125N............................................................................46
EMBH132...................................................................33, 37, 46
EMBH132N............................................................................46
EMBH132R100C.....................................................................49
EMBH132R10C.......................................................................49
EMBH132R30C...........................................................33, 38, 49
EMBH140...................................................................33, 37, 46
EMBH140N............................................................................46
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
187
Indices
Eaton list number index
EMBH140R30C...........................................................33, 38, 49
EMBH145R30C...........................................................33, 38, 49
EMBH150...................................................................33, 37, 46
EMBH150N............................................................................46
EMBH163...................................................................33, 37, 46
EMBH163N............................................................................46
EMBH201...............................................................................46
EMBH202...............................................................................46
EMBH204...............................................................................46
EMBH206...............................................................................46
EMBH208...............................................................................46
EMBH210...............................................................................46
EMBH213...............................................................................46
EMBH216...............................................................................46
EMBH220...............................................................................46
EMBH225...............................................................................46
EMBH232...............................................................................46
EMBH240...............................................................................46
EMBH250...............................................................................46
EMBH263...............................................................................46
EMBH301.........................................................................37, 47
EMBH302.........................................................................37, 47
EMBH304.........................................................................37, 47
EMBH306.........................................................................37, 47
EMBH308.........................................................................37, 47
EMBH310.........................................................................37, 47
EMBH313.........................................................................37, 47
EMBH316.........................................................................37, 47
EMBH320.........................................................................37, 47
EMBH325.........................................................................37, 47
EMBH332.........................................................................37, 47
EMBH340.........................................................................37, 47
EMBH350.........................................................................37, 47
EMBH363.........................................................................37, 47
EMBH401...............................................................................47
EMBH402...............................................................................47
EMBH404...............................................................................47
EMBH406...............................................................................47
EMBH408...............................................................................47
EMBH410...............................................................................47
EMBH413...............................................................................47
EMBH416...............................................................................47
EMBH420...............................................................................47
EMBH425...............................................................................47
EMBH432...............................................................................47
EMBH440...............................................................................47
EMBH450...............................................................................47
EMBH463...............................................................................47
EMBP................................................................................34, 40
EMBPH...................................................................................40
EMBS1100.......................................................................37, 47
EMBS1125.......................................................................37, 47
EMBS120.........................................................................37, 47
EMBS132.........................................................................37, 47
EMBS140.........................................................................37, 47
EMBS150.........................................................................37, 47
EMBS163.........................................................................37, 47
EMBS180.........................................................................37, 47
EMBS3100.......................................................................38, 47
EMBS3125.......................................................................38, 47
EMBS320.........................................................................38, 47
EMBS332.........................................................................38, 47
EMBS340.........................................................................38, 47
EMBS350.........................................................................38, 47
EMBS363.........................................................................38, 47
EMBS380.........................................................................38, 47
EMCH101...................................................................33, 37, 46
EMCH101N............................................................................46
EMCH102...................................................................33, 37, 46
EMCH102N............................................................................46
EMCH104...................................................................33, 37, 46
EMCH104N............................................................................46
EMCH106...................................................................33, 37, 46
EMCH106N............................................................................46
EMCH106R100C.....................................................................49
EMCH106R10C.......................................................................49
EMCH106R30C...........................................................33, 38, 49
EMCH108...................................................................33, 37, 46
188
EMCH108N............................................................................46
EMCH110...................................................................33, 37, 46
EMCH110N............................................................................46
EMCH110R100C.....................................................................49
EMCH110R10C.......................................................................49
EMCH110R30C...........................................................33, 38, 49
EMCH113...................................................................33, 37, 46
EMCH113N............................................................................46
EMCH116...................................................................33, 37, 46
EMCH116N............................................................................46
EMCH116R100C.....................................................................49
EMCH116R10C.......................................................................49
EMCH116R30C...........................................................33, 38, 49
EMCH120...................................................................33, 37, 46
EMCH120N............................................................................46
EMCH120R100C.....................................................................49
EMCH120R10C.......................................................................49
EMCH120R30C...........................................................33, 38, 49
EMCH125...................................................................33, 37, 46
EMCH125N............................................................................46
EMCH125R30C...........................................................33, 38, 49
EMCH132...................................................................33, 37, 46
EMCH132N............................................................................46
EMCH132R100C.....................................................................49
EMCH132R10C.......................................................................49
EMCH132R30C...........................................................33, 38, 49
EMCH140...................................................................33, 37, 46
EMCH140N............................................................................46
EMCH140R30C...........................................................33, 38, 49
EMCH145R30C...........................................................33, 38, 49
EMCH150...................................................................33, 37, 46
EMCH150N............................................................................46
EMCH163...................................................................33, 37, 46
EMCH163N............................................................................46
EMCH201...............................................................................46
EMCH202...............................................................................46
EMCH204...............................................................................46
EMCH206...............................................................................46
EMCH208...............................................................................46
EMCH210...............................................................................46
EMCH213...............................................................................46
EMCH216...............................................................................46
EMCH220...............................................................................46
EMCH225...............................................................................46
EMCH232...............................................................................46
EMCH240...............................................................................46
EMCH250...............................................................................46
EMCH263...............................................................................46
EMCH301.........................................................................37, 47
EMCH302.........................................................................37, 47
EMCH304.........................................................................37, 47
EMCH306.........................................................................37, 47
EMCH308.........................................................................37, 47
EMCH310.........................................................................37, 47
EMCH313.........................................................................37, 47
EMCH316.........................................................................37, 47
EMCH320.........................................................................37, 47
EMCH325.........................................................................37, 47
EMCH332.........................................................................37, 47
EMCH340.........................................................................37, 47
EMCH350.........................................................................37, 47
EMCH363.........................................................................37, 47
EMCH401...............................................................................47
EMCH402...............................................................................47
EMCH404...............................................................................47
EMCH406...............................................................................47
EMCH408...............................................................................47
EMCH410...............................................................................47
EMCH413...............................................................................47
EMCH416...............................................................................47
EMCH420...............................................................................47
EMCH425...............................................................................47
EMCH432...............................................................................47
EMCH440...............................................................................47
EMCH450...............................................................................47
EMCH463...............................................................................47
EMCS1100.......................................................................37, 47
EMCS1125.......................................................................37, 47
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
EMCS120.........................................................................37, 47
EMCS132.........................................................................37, 47
EMCS140.........................................................................37, 47
EMCS150.........................................................................37, 47
EMCS163.........................................................................37, 47
EMCS180.........................................................................37, 47
EMCS3100.......................................................................38, 47
EMCS3125.......................................................................38, 47
EMCS320.........................................................................38, 47
EMCS332.........................................................................38, 47
EMCS340.........................................................................38, 47
EMCS350.........................................................................38, 47
EMCS363.........................................................................38, 47
EMCS380.........................................................................38, 47
EMDH101...................................................................33, 37, 46
EMDH101N............................................................................46
EMDH102...................................................................33, 37, 46
EMDH102N............................................................................46
EMDH104...................................................................33, 37, 46
EMDH104N............................................................................46
EMDH106...................................................................33, 37, 46
EMDH106N............................................................................46
EMDH108...................................................................33, 37, 46
EMDH108N............................................................................46
EMDH110...................................................................33, 37, 46
EMDH110N............................................................................46
EMDH113...................................................................33, 37, 46
EMDH113N............................................................................46
EMDH116...................................................................33, 37, 46
EMDH116N............................................................................46
EMDH120...................................................................33, 37, 46
EMDH120N............................................................................46
EMDH125...................................................................33, 37, 46
EMDH125N............................................................................46
EMDH132...................................................................33, 37, 46
EMDH132N............................................................................46
EMDH140...................................................................33, 37, 46
EMDH140N............................................................................46
EMDH150...................................................................33, 37, 46
EMDH150N............................................................................46
EMDH163...................................................................33, 37, 46
EMDH163N............................................................................46
EMDH201...............................................................................46
EMDH202...............................................................................46
EMDH204...............................................................................46
EMDH206...............................................................................46
EMDH208...............................................................................46
EMDH210...............................................................................46
EMDH213...............................................................................46
EMDH216...............................................................................46
EMDH220...............................................................................46
EMDH225...............................................................................46
EMDH232...............................................................................46
EMDH240...............................................................................46
EMDH250...............................................................................46
EMDH263...............................................................................46
EMDH301.........................................................................37, 47
EMDH302.........................................................................37, 47
EMDH304.........................................................................37, 47
EMDH306.........................................................................37, 47
EMDH308.........................................................................37, 47
EMDH310.........................................................................37, 47
EMDH313.........................................................................37, 47
EMDH316.........................................................................37, 47
EMDH320.........................................................................37, 47
EMDH325.........................................................................37, 47
EMDH332.........................................................................37, 47
EMDH340.........................................................................37, 47
EMDH350.........................................................................37, 47
EMDH363.........................................................................37, 47
EMDH401...............................................................................47
EMDH402...............................................................................47
EMDH404...............................................................................47
EMDH406...............................................................................47
EMDH408...............................................................................47
EMDH410...............................................................................47
EMDH413...............................................................................47
EMDH416...............................................................................47
Indices
Eaton list number index
EMDH420...............................................................................47
EMDH425...............................................................................47
EMDH432...............................................................................47
EMDH440...............................................................................47
EMDH450...............................................................................47
EMDH463...............................................................................47
EMDL..........................................................................34, 40, 41
EMDS1100.......................................................................37, 47
EMDS120.........................................................................37, 47
EMDS132.........................................................................37, 47
EMDS140.........................................................................37, 47
EMDS150.........................................................................37, 47
EMDS163.........................................................................37, 47
EMDS180.........................................................................37, 47
EMDS3100.......................................................................38, 47
EMDS320.........................................................................38, 47
EMDS332.........................................................................38, 47
EMDS340.........................................................................38, 47
EMDS350.........................................................................38, 47
EMDS363.........................................................................38, 47
EMDS380.........................................................................38, 47
EMGP142...............................................................................40
EMPL..........................................................................34, 40, 41
EPBCTMT160.................................................69, 73, 77, 81, 85
EPBCTMT250.......................................................73, 77, 81, 85
EPBCTMT3P...................................................69, 73, 77, 81, 85
EPBCTMT400.........................................................................85
EPBDLK1...........................................................................71, 75
EPBKEL250.............................................................................69
EPBKEL400.......................................................................73, 77
EPBKEL800.......................................................................81, 85
EPBKN1253............................................................................67
EPBKN1253M.........................................................................67
EPBKN1254............................................................................67
EPBKN1254M.........................................................................67
EPBKN125L............................................................................67
EPBKN125LM.........................................................................67
EPBKN2403......................................................................71, 75
EPBKN2403M...................................................................71, 75
EPBKN2404......................................................................71, 75
EPBKN2404M...................................................................71, 75
EPBKN240L......................................................................71, 75
EPBKN240LM...................................................................71, 75
EPBKN2633............................................................................78
EPBKN2633M.........................................................................78
EPBKN2634............................................................................78
EPBKN2634M.........................................................................78
EPBKN263L............................................................................78
EPBKN263LM.........................................................................78
EPBKN3803............................................................................82
EPBKN3803M.........................................................................82
EPBKN3804............................................................................82
EPBKN3804M.........................................................................82
EPBKTFSLW......................................................................78, 82
EPBKTFSN2............................................................................67
EPBKTFSN3............................................................................71
EPBMETER1.....................68, 69, 72, 73, 76, 77, 80, 81, 84, 85
EPBN11225............................................................................66
EPBN11225SXB......................................................................67
EPBN11225SXM....................................................................69
EPBN11240............................................................................70
EPBN1425..............................................................................66
EPBN1425SXB........................................................................67
EPBN1425SXM......................................................................69
EPBN1625..............................................................................66
EPBN1625SXB........................................................................67
EPBN1625SXM......................................................................69
EPBN1640..............................................................................70
EPBN1825..............................................................................66
EPBN1825SXB........................................................................67
EPBN1825SXM......................................................................69
EPBN1BP1......................................................67, 71, 75, 79, 83
EPBN1CX250..........................................................................68
EPBN1EX250..........................................................................68
EPBN1EX250M.......................................................................68
EPBN1EXDIN..........................................................................68
EPBN1SPD123................................................69, 73, 77, 81, 85
EPBN1SPD1234..............................................69, 73, 77, 81, 85
EPBN1SUPM....................................................................68, 69
EPBN21240............................................................................74
EPBN21240SXB......................................................................76
EPBN21240SXM..............................................................73, 77
EPBN21263............................................................................78
EPBN21263SXB................................................................79, 84
EPBN21263SXM..............................................................81, 85
EPBN21840............................................................................74
EPBN21840SXB......................................................................76
EPBN21840SXM....................................................................77
EPBN21863............................................................................78
EPBN21863SXB................................................................79, 84
EPBN21863SXM..............................................................81, 85
EPBN2640..............................................................................74
EPBN2640SXB..................................................................71, 76
EPBN2640SXM................................................................73, 77
EPBN2863..............................................................................78
EPBN2BP3..................................................................75, 79, 83
EPBN2CX250........................................................72, 76, 80, 84
EPBN2EX250....................................................................72, 76
EPBN2EX250M.................................................................72, 76
EPBN2EXDIN..............................................................72, 76, 84
EPBN31280............................................................................82
EPBN3880..............................................................................82
EPBN3BP3..............................................................................83
EPBN3EX250....................................................................80, 84
EPBN3EX250M.................................................................80, 84
EPBN3EXDIN..........................................................................80
EPBN3LKKTM.................................................69, 73, 77, 81, 85
EPBN3LKRJ45................................................69, 73, 77, 81, 85
EPBN3SUPM................................72, 73, 76, 77, 80, 81, 84, 85
EPBPN11225..........................................................................91
EPBPN11240..........................................................................91
EPBPN1425............................................................................91
EPBPN1625............................................................................91
EPBPN1640............................................................................91
EPBPN1825............................................................................91
EPBPN21240..........................................................................91
EPBPN21263..........................................................................91
EPBPN21840..........................................................................91
EPBPN21863..........................................................................91
EPBPN2640............................................................................91
EPBPN2863............................................................................91
EPBPN31280..........................................................................91
EPBPN3880............................................................................91
EPBSXBCTMT.................................................69, 73, 77, 81, 85
ETM2209SP..........................................................................104
ETM2210SP..........................................................................104
ETM2211SP..........................................................................104
ETM2212SP..........................................................................104
ETM2223SP..........................................................................104
ETM2224SP..........................................................................104
ETM2225SP..........................................................................104
ETM2226SP..........................................................................104
M21MSSU...........................................................................118
M21MSU..............................................................................118
M21MSU2K.........................................................................118
M21MSU2SK.......................................................................118
M21MSULK..........................................................................118
M21MSUML........................................................................118
M22MSU..............................................................................118
M22MSUL............................................................................118
M23MSUL............................................................................118
MC100M2DT........................................................................123
MC100M2MDT....................................................................123
MC100M2SDT.....................................................................123
MC100M4............................................................................122
MC100M4M.........................................................................122
MC100M4S..........................................................................122
MC125M3DT........................................................................123
MC125M3MDT....................................................................123
MC125M3SDT.....................................................................123
MC125M5............................................................................122
MC125M5M.........................................................................122
MC125M5S..........................................................................122
MC150M3............................................................................122
MC150M3DT........................................................................123
MC150M3M.........................................................................122
MC150M3MDT....................................................................123
MC150M3S..........................................................................122
MC150M3SDT.....................................................................123
MC175M4............................................................................122
MC175M4DT........................................................................123
MC175M4M.........................................................................122
MC175M4MDT....................................................................123
MC175M4S..........................................................................122
MC175M4SDT.....................................................................123
MC200M4............................................................................122
MC200M4DT........................................................................123
MC200M4M.........................................................................122
MC200M4MDT....................................................................123
MC200M4S..........................................................................122
MC200M4SDT.....................................................................123
MC225M5............................................................................122
MC225M5DT........................................................................123
MC225M5M.........................................................................122
MC225M5MDT....................................................................123
MC225M5S..........................................................................122
MC225M5SDT.....................................................................123
MC250M5............................................................................122
MC250M5DT........................................................................123
MC250M5M.........................................................................122
MC250M5MDT....................................................................123
MC250M5S..........................................................................122
MC250M5SDT.....................................................................123
MC25M1..............................................................................122
MC25M1M...........................................................................122
MC25M1S............................................................................122
MC275M6............................................................................122
MC275M6DT........................................................................123
MC275M6M.........................................................................122
MC275M6MDT....................................................................123
MC275M6S..........................................................................122
MC275M6SDT.....................................................................123
MC300M6............................................................................122
MC300M6DT........................................................................123
MC300M6M.........................................................................122
MC300M6MDT....................................................................123
MC300M6S..........................................................................122
MC300M6SDT.....................................................................123
MC325M7DT........................................................................123
MC325M7MDT....................................................................123
MC325M7SDT.....................................................................123
MC350M7DT........................................................................123
MC350M7MDT....................................................................123
MC350M7SDT.....................................................................123
MC375M8DT........................................................................123
MC375M8MDT....................................................................123
MC375M8SDT.....................................................................123
MC400M8DT........................................................................123
MC400M8MDT....................................................................123
MC400M8SDT.....................................................................123
MC425M9DT........................................................................123
MC425M9MDT....................................................................123
MC450M9DT........................................................................123
MC450M9MDT....................................................................123
MC475M10DT......................................................................123
MC475M10MDT..................................................................123
MC500M10DT......................................................................123
MC500M10MDT..................................................................123
MC50M2..............................................................................122
MC50M2M...........................................................................122
MC50M2S............................................................................122
MC525M11DT......................................................................123
MC525M11MDT..................................................................123
MC550M11DT......................................................................123
MC550M11MDT..................................................................123
MC575M12DT......................................................................123
MC575M12MDT..................................................................123
MC600M12DT......................................................................123
MC600M12MDT..................................................................123
MC75M3..............................................................................122
MC75M3M...........................................................................122
MC75M3S............................................................................122
N2-250KCO............................................................................66
N2-4-250KCO.........................................................................66
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
189
Indices
Eaton list number index
N3-400...................................................................................70
N3-4-400................................................................................70
NLW-4-630.............................................................................78
NLW-4-800.............................................................................82
NLW-630................................................................................78
NLW-800................................................................................82
NZM1-1-XKSA...............................................67, 71, 75, 79, 83
NZM1-XKSA...................................................67, 71, 75, 79, 83
NZM2-XKSA...............................................................75, 79, 83
NZMB1-1-AF100............................................67, 71, 75, 79, 83
NZMB1-1-AF125............................................67, 71, 75, 79, 83
NZMB1-1-AF16..............................................67, 71, 75, 79, 83
NZMB1-1-AF20..............................................67, 71, 75, 79, 83
NZMB1-1-AF32..............................................67, 71, 75, 79, 83
NZMB1-1-AF40..............................................67, 71, 75, 79, 83
NZMB1-1-AF50..............................................67, 71, 75, 79, 83
NZMB1-1-AF63..............................................67, 71, 75, 79, 83
NZMB1-1-AF80..............................................67, 71, 75, 79, 83
NZMB1-A100.................................................67, 71, 75, 79, 83
NZMB1-A125.................................................67, 71, 75, 79, 83
NZMB1-A160.................................................67, 71, 75, 79, 83
NZMB1-A20...................................................67, 71, 75, 79, 83
NZMB1-A32...................................................67, 71, 75, 79, 83
NZMB1-A40...................................................67, 71, 75, 79, 83
NZMB1-A50...................................................67, 71, 75, 79, 83
NZMB1-A63...................................................67, 71, 75, 79, 83
NZMB1-A80...................................................67, 71, 75, 79, 83
NZMC1-A100.............................................................75, 79, 83
NZMC1-A125.............................................................75, 79, 83
NZMC1-A160.............................................................75, 79, 83
NZMC1-A20...............................................................75, 79, 83
NZMC1-A32...............................................................75, 79, 83
NZMC1-A40...............................................................75, 79, 83
NZMC1-A50...............................................................75, 79, 83
NZMC1-A63...............................................................75, 79, 83
NZMC1-A80...............................................................75, 79, 83
NZMC2-4-A160KCO...............................................................66
NZMC2-4-A200KCO...............................................................66
NZMC2-4-A250KCO...............................................................66
NZMC2-A125-BT........................................................75, 79, 83
NZMC2-A160-BT........................................................75, 79, 83
NZMC2-A160KCO..................................................................66
NZMC2-A200-BT........................................................75, 79, 83
NZMC2-A200KCO..................................................................66
NZMC2-A250-BT........................................................75, 79, 83
NZMC2-A250KCO..................................................................66
NZMLW-4-A630.....................................................................78
NZMLW-4-A800.....................................................................82
NZMLW-A630........................................................................78
NZMLW-A800........................................................................82
NZMN2-4-A160KCO..............................................................66
NZMN2-4-A200KCO..............................................................66
NZMN2-4-A250KCO..............................................................66
NZMN2-A125-BT.......................................................75, 79, 83
NZMN2-A160-BT.......................................................75, 79, 83
NZMN2-A160KCO..................................................................66
NZMN2-A200-BT.......................................................75, 79, 83
NZMN2-A200KCO..................................................................66
NZMN2-A250-BT.......................................................75, 79, 83
NZMN2-A250KCO..................................................................66
NZMN3-4-A250...............................................................70, 74
NZMN3-4-A320...............................................................70, 74
NZMN3-4-A400...............................................................70, 74
NZMN3-A250...................................................................70, 74
NZMN3-A250BT....................................................................83
NZMN3-A320...................................................................70, 74
NZMN3-A320BT....................................................................83
NZMN3-A400...................................................................70, 74
NZMN3-A400BT....................................................................83
OBK103SP..............................................................................97
OLV725SP.............................................................................101
OLV726SP.............................................................................101
OLV727SP.............................................................................101
OLV728SP.............................................................................101
PD1...............................................................34, 40, 41, 97, 103
PD2.............................................................................34, 40, 51
PD4.......................................................................................101
PFR-003..................................................................................63
190
PFR-03....................................................................................63
PFR-5......................................................................................63
PFR-W-105.............................................................................63
PFR-W-140.............................................................................63
PFR-W-20...............................................................................63
PFR-W-210.............................................................................63
PFR-W-30...............................................................................63
PFR-W-35...............................................................................63
PFR-W-70...............................................................................63
SH265SP..............................................................................101
SH754SP..............................................................................101
SNT4LP11K......................................................................79, 83
TR-G3/8..................................................................................63
UVH4LP11K......................................................................79, 83
WA1212...............................................................................103
POWER DISTRIBUTION COMPONENTS PG01414001U – March 2015
At Eaton, we’re energized by the challenge of powering a world that demands more. With over 100 years experience in electrical power management, we have the expertise to see beyond today. From groundbreaking products to turnkey design and engineering
services, critical industries around the globe count on Eaton.
We power businesses with reliable, efficient and safe electrical
power management solutions. Combined with our personal
service, support and bold thinking, we are answering tomorrow’s
needs today. Follow the charge with Eaton.
Visit eaton.com/electrical.
Eaton Electric Limited
Grimshaw Lane
Middleton
Manchester M24 1GQ
United Kingdom
Customer Support Centre
Tel: +44 (0)8700 545 333
Fax: +44 (0)8700 540 333
email: [email protected]
© 2015 Eaton Corporation
All Rights Reserved
Printed in UK
Form No. PG01414001U
March 2015
www.eaton.uk.com/electrical
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement