Samsung | LE-32D450G1WXZF | Datasheet | Samsung LE32D450ZF 32" HD-Ready Black

E-MANUAL
imagine the possibilities
Thank you for purchasing this Samsung
product. To receive more complete service,
please register your product at
www.samsung.com/register
Model___________ Serial No._____________
Contents
Other Information
Preference Features
Channel Setting
64
• Analogue Channel Teletext Feature
167
• System Menu
92
• Anti-theft Kensington Lock
171
• Support Menu
114
• Connections Common Interface Slot
173
5
• Troubleshooting
175
7
• Licence
192
• Using the INFO button (Now & Next
guide)
1
• Using Channel menu (Watch TV)
2
• Schedule Manager
• Channel List
• Network
• Channel Manager
11
• Retuning Channels
17
Basic Features
for LCD 550 series and above
Advanced Features
• My Downloads
122
• Anynet+
149
• AllShare™
• Picture Menu
35
• Sound Menu
52
for LCD 550 series and above
163
❑❑ Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV programme information for each channel
according to the broadcasting time.
●● Scroll ◄, ► to view information for a desired programme while watching the
current channel.
●● Scroll ▲, ▼ to view information for other channels. If you want to move to the
currently selected channel, press the ENTERE button.
▶
All
Information
* It may differ depending on the model.
English
❑❑ Using Channel menu (Watch TV)
Press the CONTENT button to select Watch TV, then select the desired menu.
Each screen will be displayed.
■■ Guide
◀
The EPG (Electronic Programme
Guide) information is provided by
broadcasters. Using programme
schedules provided by broadcasters,
you can specify programmes you want
to watch in advance so that the channel
automatically changes to the selected
programme channel at the specified
time. Programme entries may appear
blank or out of date depending on a
channel status.
English
Watch TV
Guide
Schedule Manager
Channel List
Channel Manager
My Downloads
Source
▶
Using Guide
Guide
2:10 Tue 1 Jun
DTV Air 3 five
Home and Away
18:00 - 18:30
Drama
Dani is devastated when scott makes clear his views on marriage...
800 five
Channel View - All
Today
◀
19:00
2 DiscoveryH&L
Tsunami Pri...
The Curious...
Home and...
No Information
No Information
5 QVC
No Information
▼ 6 R4DTT
No Information
B
D C
Sche.Mgr
1
A
B
-24 DHours
2
C
A B
CHours
A DB
+24
3
D
20:30
Tine Team
American Chopper
4 price-drop.tv
A
20:00
1 Discovery
3 five
C
19:30
Dark Angel
Ch. Mode
; Information
4
5
* It may differ depending on the model.
English
Fiv...
k Page
6
E Schedule
7
▶
1C
B
D
Red
(Sche.Mgr):
Moves to the reserved programmes in Sche.Mgr.
2A
D (-24 Hours): Viewing the list of programmes to be broadcasted before 24
Green
hours.
3
A B
D Hours): Viewing the list of programmes to be broadcasted after 24
Yellow
(+24
hours.
4
Blue (Ch. Mode): Select the type of channels you want to display on the Channel
List window. (All, TV, Radio, Data/Other, Favourites 1-5)
C
A
A
B
B
C
D
5 ; (Information): Displays details of the selected programme.
◀ 6 k (Page): Move to previous or next page.
7 E (Watch / Schedule)
●● When selecting the current programme, you can watch the selected
programme.
●● When selecting the future programme, you can reserve to watch the selected
programme. To cancel the schedule, press the ENTERE button again and
select Cancel Schedules.
English
▶
■■ Schedule Manager
Cancel or set the Timer Viewing to display the channel you want at the intended
time.
Using Timer Viewing
You can set a desired channel to be displayed automatically at the intended time.
Set the current time first to use this function.
1. Press the ENTERE button to add programme to schedule manually.
◀
2. Press the ◄/►/▲/▼ button to set the Antenna, Channel, Repeat, Date,
Start Time.
●● Antenna: Select the desired broadcasting signal.
●● Channel: Select the desired channel.
English
▶
●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at
your convenience. If you select Manual, you can set the day you want.
NN The (c) mark indicates the day is selected.
●● Date: You can set desired date.
NN It is available when you select Once in Repeat.
●● Start Time: You can set start time you want.
NN If you want to edit or cancel the schedule, select the reserved schedule on
◀
the Schedule List, and select the Edit or Cancel Schedules.
English
▶
■■ Channel List
You can view channel information, All,
TV, Radio, Data/Other, Analogue or
Favourites 1-5.
NN When you press the CH LIST
◀
button on the remote control,
Channel List screen will be
displayed at once.
●● All: Shows all currently available
channels.
●●
●●
●●
●●
●●
Channel List
All
1
TV#6
The Spo...
2
BBC ONE glogal News
3
Pardon...
4
Real Sp...
6
The Daily
7
Pros vs.
8
Today
9
Pardon...
Air
C
A Antenna
B
CDProgramme
A B View DL CH Mode
E Watch
k Page
▶
TV: Shows all currently available TV channels.
Radio: Shows all currently radio channels.
Data/Other: Shows all currently available MHP or other channels.
Analogue: Shows all currently available analogue channels.
Favourites 1-5: Shows all favourite channels.
English
NN Favourites 1-5 will be displayed when you set Add to Favourites.
NN If you want to view favourite channels you added, press the CH LIST button
and use L (CH Mode) button to move Favourites 1-5.
NN Using the remote control buttons with the Channel List.
●C●
●●
◀
A
B
D
Red
(Antenna):
Switches to Air, Cable or Satellite
for LCD 570 series
.
A B
D
Yellow
(Programme
View /Channel View): Displays the programme
when digital channel is selected. Returns to the channel view.
C
●● L (CH Mode/Channel): Move to the All, TV, Radio, Data/Other,
Analogue or Favourites 1-5. / Change channels.
NN When you press the
A B
D
(Programme
View) button, you can move to
other channels using L (Channel) button.
C
English
▶
●● E (Watch/Information): Watches the channel you select. / Displays
details of the selected programme.
●● k (Page): Move to next or previous page.
Channel Status Display Icons
Icon
◀
Operations
a
An analogue channel.
)
A reserved programme.
\
A locked channel.
▶
English
How to use Timer Viewing in Channel List (digital channels only)
When you set the Timer Viewing in Channel List, you can only set the programme in
Programme View.
1. Press the CH LIST button, then select a desired digital channel.
2. Press the
C
A B
D
(Programme
View) button.
3.Press the ▲ / ▼ buttons to select the desired programme, then press the
ENTERE or INFO button.
◀
4. Select Timer Viewing, then press the ENTERE button when done.
NN If you want to cancel Timer Viewing, follow steps 1 through 3. Select Cancel
Schedules.
English
▶
■■ Channel Manager
You can edit the channel to your preference.
●● (
●● (
) Channels: Shows the channel list according to channel type.
) Favourites 1-5: Shows
favourite channels.
Channel Manager
All
Selected item: 4 ChannelNumber
●● (
) Satellite: Shows the
channel list according to satellite
signal. for LCD 570 series
NN Using the colour buttons with the
◀
Channel Manager.
B
D
●C● A Red
(Antenna):
Switches to Air, Cable or
Satellite for LCD 570 series .
C
A
B
●●
D
Air
C
A Antenna
B
D
C
A
B
D Sorting E Select T Tools R Return
* It may differ depending on the model.
Blue (Sorting): Changes the list ordered by number or name.
English
▶
Channel Status Display Icons
Icon
Operations
a
An analogue channel.
c
A channel selected.
F
A channel set as a favourite.
\
A locked channel.
T
Displays the Channel Manager option menu.
◀
▶
English
Channel Manager Option Menu t
Set each channel using the Channel Manager menu options (Watch, Add to
Favourites/Edit Favourites, Lock/Unlock, Edit Channel Name, Edit Channel
Number, Delete, Select All/Deselect All, Reorder for LCD 570 series ).
Option menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
◀
▶
English
●● Watch: Watch the selected channel.
●● Add to Favourites/Edit Favourites: Set channels you watch frequently as
favourites. / Add or Delete the selected channel in Favourites 1-5.
1.
Select the Add to Favourites/Edit Favourites, then press the ENTERE
button.
NN If the channel is already added to favourite channel, Edit Favourites will
be shown.
◀
2.
Press the ENTERE button to select Favourites 1-5, then press the OK
button.
NN One favourite channel can be added in several of Favourites among
Favourites 1-5.
English
▶
●● Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed.
NN NOTE
●● This function is available only when the Channel Lock is set to On.
●● The PIN input screen appears. Enter your 4-digit PIN, Change the PIN
using the Change PIN option.
●● Edit Channel Name (analogue channels only): Assign your own channel name.
●● Edit Channel Number: Edit the number by pressing the number buttons desired.
◀
NN Some area may not be able to support Edit Channel Name and Edit
Channel Number function.
English
▶
●● Delete: You can delete a channel to display the channels you want.
●● Deselect All: Deselect all the selected channels.
NN You can only select Deselect All when one or more channels are selected.
●● Select All: Select all the channels in the channel list.
●● Reorder (when the Antenna is set to Satellite)
for LCD 570 series
: Rearrange the
channel list in numerical order.
◀
▶
English
❑❑ Retuning Channels
OO MENUm → Channel → ENTERE
■■ Antenna (Air / Cable / Satellite for LCD 570 series ) t
Before your television can begin memorising the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air, Cable or
Satellite for LCD 570 series system).
◀
▶
English
■■ Country
(depending on the country)
The PIN input screen appears. Enter your 4 digit PIN number.
●● Digital Channel: Change the country for digital channels.
●● Analogue Channel: Change the country for analogue channels.
◀
▶
English
■■ Auto Tuning
(depending on the country)
Scans for a channel automatically and stores in the TV.
NN Automatically allocated programme numbers may not correspond to actual
◀
or desired programme numbers. If a channel is locked, the PIN input window
appears.
●● Auto Tuning
Air / Cable / Satellite for LCD 570 series : Select the antenna source to
memorise.
Digital & Analogue / Digital / Analogue: Select the channel source to
memorise.
English
▶
When Antenna Source is set to Air or Cable:
When selecting Cable → Digital & Analogue or Digital: Provide a value to
scan for cable channels.
–– Search Mode (Full / Network / Quick): Scans for all channels with active
broadcast stations and stores them in the TV.
NN If you select Quick, you can set up the Network, Network ID,
Frequency, Modulation and Symbol Rate manually by pressing the
button on the remote control.
◀
–– Network (Auto / Manual): Selects the Network ID setting mode among
Auto or Manual.
–– Network ID: When Network is Manual, you can set up Network ID using
the numeric buttons.
English
▶
–– Frequency: Displays the frequency for the channel. (differs in each
country)
–– Modulation: Displays available modulation values.
–– Symbol Rate: Displays available symbol rates.
●● Cable Search Option
(depending on the country & cable channels only)
Sets additional search options such as the frequency and symbol rate for a
cable network search.
◀
Start frequency / Stop frequency: Set the start or stop frequency (differs in
each country).
Symbol Rate: Displays available symbol rates.
Modulation: Displays available modulation values.
English
▶
■■ Manual Tuning
Scans for a channel manually and stores in the TV.
NN If a channel is locked, the PIN input window appears.
NN According to channel source, Manual Tuning may be supported.
When Antenna Source is set to Air, Cable or Satellite:
●● Digital Channel Tuning: Scans for a digital channel manually and stores
◀
C A (New)
B
D
in the TV. Press the
button to search the digital channels. When
scanning has finished, a channel is updated in the channel list.
–– When selecting Antenna → Air: Channel, Frequency, Bandwidth
–– When selecting Antenna → Cable: Frequency, Modulation, Symbol
Rate
–– When selecting Antenna → Satellite: Satellite, Channel
English
for LCD 570 series
▶
C
●● Analogue Channel Tuning : Scans for an analogue channel. Press the
A
B
D
(New) button to search the digital channels by adjusting the Programme,
Colour System, Sound System, Channel, Search.
NN Channel mode
–– P (programme mode): When tuning is complete, the broadcasting
stations in your area have been assigned to position numbers from
P0 to P99. You can select a channel by entering the position number
in this mode.
◀
–– C (aerial channel mode) / S (cable channel mode): These two modes
allow you to select a channel by entering the assigned number for
each aerial broadcasting station or cable channel.
English
▶
When Antenna Source is set to Satellite
for LCD 570 series
:
●● Transponder: Selects the transponder using the up/down buttons.
●● Scan Mode (All Channels / Free Channels Only): Selects either free or all
channels to store.
●● Network Search (Disable / Enable): Enable / Disable network search using
the up/down buttons.
●● Signal Quality: Display the current status of broadcasting signal.
◀
NN Information on a satellite and its transponder is subject to change depending
on the broadcasting conditions.
NN When setting is completed, move to Search and press the ENTERE
button. Channel scan is started.
English
▶
■■ Satellite System for LCD 570 series
The PIN input screen appears. Enter your 4 digit PIN number. Satellite System
is available when Antenna is set to Satellite. Before running Auto Store, set
Satellite System. Then channel scan is run normally.
●● Satellite Selection: You can choose the satellites for this TV.
NN This function is available when Antenna is set to Satellite.
●● LNB Power (Off / On): Enables or disables the power supply for the LNB.
●● LNB Settings: Configures the outdoor equipment.
◀
Satellite: Selects the satellite for receiving digital broadcasts.
Transponder: Selects a transponder from the list or adds a new transponder.
DiSEqC Mode: Selects DiSEqC mode for the selected LNB.
Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.
English
▶
Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.
Tone 22 kHz (Off / On / Auto): Selects the Tone 22 kHz depending on the
LNB type. For a universal LNB it should be Auto.
Signal Quality: Display the current status of broadcasting signal.
●● SatCR/Unicable Settings
NN It is available when LNB Power is set to On.
NN During using this function, the sound will be mute temporarily.
◀
SatCR/Unicable Settings(On / Off): Enable or disable single cable installation
support.
Slot Number: Select the SatCR user slot number for this receiver. Choose it
in the range of 1 to 8.
English
▶
Slot Frequency: Enter the appropriate frequency to receive the signal from
SatCR.
NN It has the entire range from 950MHz to 2150NHz. The predefined values
are 1210MHz, 1420MHz, 1680MHz, 2040MHz.
Detect Slot Frequency: Detect the signal frequency automatically for the
selected slot number.
Verify Slot Frequency: Verify that the entered frequency corresponds to the
selected slot number.
◀
▶
English
●● Positioner Settings: Configures the antenna positioner.
Positioner (On / Off): Enables or disables the positioned control.
Positioner Type (USALS / DiSEqC 1.2): Sets the positioned type between
DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System).
–– My Longitude: Sets the longitude for my location.
–– My Latitude: Sets the latitude for my location.
–– Satellite Longitude Settings: Sets the longitude of user defined satellites.
◀
▶
English
User Mode: Sets the position of satellite antenna according to each satellite.
If you store the current position of satellite antenna according to a certain
satellite, when the signal of that satellite is needed, the satellite antenna can
be moved to pre-populated position.
–– Satellite: Selects the satellite to set the position for.
–– Transponder: Selects a transponder from the list for signal reception.
–– Moving Mode: Selects the movement mode between discrete and
continuous movement.
◀
–– Step Size: Adjusts the step size degrees for the antenna rotation. Step
Size is available when Moving Mode is set to Step.
–– Go to Stored Position: Rotates the antenna to the stored satellite
position.
English
▶
–– Antenna Position: Adjusts and stores the antenna position for the
selected satellite.
–– Store Current Position: Stores current position as the selected positioner
limit.
–– Signal Quality: Display the current status of broadcasting signal.
Installer Mode: Sets limits to the scope of movement of satellite antenna or
reset the position. Generally, installation guide uses this function.
◀
–– Limit Position (East / West): Selects the direction of the positioner Limit.
–– Antenna Position: Adjusts and stores the antenna position for the
selected satellite.
English
▶
–– Store Current Position: Stores the current position as the selected
positioner Limit.
–– Go to Zero: Moves the antenna to the reference position.
–– Reset Positioner Limit: Allows the antenna to rotate over the full arc.
●● Reset All Setting (OK / Cancel): All satellite settings will be reset to the initial
values.
◀
▶
English
■■ Edit Channel Number (Disable / Enable)
(depending on the country)
Use this to change channel number. When channel number is changed, channel
information is not updated automatically.
◀
▶
English
■■ Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel manually.
NN Fine tuned channels are marked with an asterisk “*”.
NN To reset the fine-tuning, select Reset.
◀
▶
English
■■ Transfer Channel List
(depending on the country)
Imports or exports the channel map. You should connect a USB storage to use
this function.
NN The PIN number input screen appears. Enter your 4 digit PIN number.
●● Import from USB: Import channel list from USB.
●● Export to USB: Export channel list to USB.
◀
▶
English
❑❑ Changing the Preset Picture Mode
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode
Select your preferred picture type.
NN When connecting a PC, you can only make changes to the Entertain and
Standard.
●● Dynamic: Suitable for a bright room.
◀
●●
●●
●●
●●
Standard: Suitable for a normal environment.
Natural
for LCD 550 series and above
: Suitable for reducing eye strain.
Movie: Suitable for watching movies in a dark room.
Entertain: Suitable for watching movies and games.
NN It is only available when connecting a PC.
English
▶
❑❑ Adjusting Picture Settings
■■ Samsung MagicAngle
for LCD 450 (19”, 22”) Model
OO MENUm → Picture → Samsung MagicAngle → ENTERE
Adjust screen viewing Angle to optimize screen quality according to your viewing
position.
●● Samsung MagicAngle: When viewing the screen at an angle from below
◀
or bove by setting the appropriate mode for each position you can obtain a
similar picture quality as viewing the screen directly from the front.
Off: Select when viewing from the front position.
Lean Back Mode: Select when viewing from a slightly lower position.
Standing Mode: Select when viewing from the upper position.
●● Mode: Adjust screen viewing angle.
NN When Samsung MagicAngle is set to Lean Back Mode or Standing Mode,
Gamma is not available.
English
▶
■■ Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
OO MENUm → Picture → Backlight → ENTERE
NN NOTE
●● In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R)
function is not available.
●● When connecting a PC, you can only make changes to Backlight,
◀
Contrast, Brightness and Sharpness.
●● Settings can be adjusted and stored for each external device connected
to the TV.
English
▶
■■ Screen Adjustment
Set the various picture options such as picture size and aspect ratio.
●● Picture Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most of the
time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
◀
NN Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
NN Adjusts the Zoom or Position by using ▲, ▼ button.
English
▶
4:3: Sets the picture to basic (4:3) mode.
NN Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
◀
Smart View1
for LCD 550 series and above
: Reduces original screen by 50%.
Smart View2
for LCD 550 series and above
: Reduces original screen by 25%.
▶
NN NOTE
●● Smart View1 is enabled only in HDMI mode.
●● Smart View2 is enabled only in DTV and HDMI modes.
●● The picture size can vary depending on the input resolution when
content is played using Videos under My Downloads.
English
●● Position: Adjust the picture position. It is only available in Screen Fit or Wide
Zoom.
●● Zoom/Position: Adjust the picture position. It is only available in Zoom.
NN NOTE
●● After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i
/ 1080p) mode, you may need to centre the picture:
1. Press the u or d button to select Position.
◀
2. Press the ENTERE button.
3. Press the u, d, l or r button to move the picture.
●● Depending on the input source, the picture size options may vary.
●● If you want to reset the position you adjusted, select Reset in the
Position screen. The picture will be set to its default position.
English
▶
●● The available items may differ depending on the selected mode.
●● When connecting a PC, only 16:9 and 4:3 modes can be adjusted.
●● Settings can be adjusted and stored for each external device connected
to an input on the TV.
●● If you use the Screen Fit function with HDMI 720p input, 1 line will be cut
at the top, bottom, left and right as in the overscan function.
●● 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when
◀
picture size is set to Auto Wide. You can determine the desired picture size
at the 4:3 WSS (Wide Screen Service) size or the original size. Each European
country requires different picture size.
English
▶
●● PC Screen Adjustment
NN It is available in PC mode.
Coarse / Fine: Removes or reduces picture noise. If the noise is not removed
by Fine-tuning alone, then adjust the frequency as best as possible (Coarse)
and Fine-tune again. After the noise has been reduced, readjust the picture so
that it is aligned to the centre of screen.
◀
Position: Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjust the Vertical-Position. Press the ◄ or ►
button to adjust the Horizontal-Position.
Image Reset: Resets the image to default settings.
English
▶
■■ Auto Adjustment t
OO MENUm → Picture → Auto Adjustment → ENTERE
Adjust frequency values/positions and fine tune the settings automatically.
NN It is available in PC mode.
NN Not available when connecting with an HDMI/DVI cable.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
◀ Depending on the version of Windows and the video card, the actual screens on your ▶
PC may differ in which case the same basic set-up information will almost always be
applied. (If not, contact your computer manufacturer or Samsung Dealer.)
English
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control Panel” window and a display
dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
●● The correct size setting (resolution]
●● If a vertical-frequency option exists on your display settings dialog box, the
◀
correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog
box.
English
▶
❑❑ Changing the Picture Options
■■ Advanced Settings
OO MENUm → Picture → Advanced Settings → ENTERE
(available in Standard / Movie mode)
You can adjust the detailed setting for the
screen including colour and contrast.
NN When connecting a PC, you can
◀
only make changes to Gamma and
White Balance.
●● Black Tone (Off / Dark / Darker /
Darkest): Select the black level to
adjust the screen depth.
Advanced Settings
: Off
Dynamic Contrast
: Medium
Shadow Detail
:0
Gamma
:0
RGB Only Mode
: Off
Colour Space
: Native
▶
White Balance
▼
U Move
English
►
Black Tone
E Enter
R Return
●●
●●
●●
●●
Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.
Shadow Detail: Increase the brightness of dark images.
Gamma: Adjust the primary colour intensity.
RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and
Blue colour for making fine adjustments to the hue and saturation.
●● Colour Space (Auto / Native): Adjust the range of colours available to create
the image.
◀
▶
English
●● White Balance: Adjust the colour temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
●● Flesh Tone: Emphasize pink “Flesh Tone.”
●● Edge Enhancement (Off / On): Emphasize object boundaries.
●● Motion Lighting (Off / On): Reduce power consumption by brightness
◀
▶
control adapted motion.
English
■■ Picture Options
OO MENUm → Picture → Picture Options → ENTERE
NN When connecting a PC, you can only
make changes to the Colour Tone.
●● Colour Tone (Cool / Standard /
Warm1 / Warm2)
NN Warm1 or Warm2 will be
◀
Picture Options
Colour Tone
: Standard
Digital Noise Filter
: Auto
MPEG Noise Filter
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
►
deactivated when the picture
mode is Dynamic.
NN Settings can be adjusted and
stored for each external device
connected to an input on the TV.
English
▶
U Move
E Enter
R Return
●● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation):
If the broadcast signal received by your TV is weak, you can activate the
Digital Noise Filter feature to reduce any static and ghosting that may appear
on the screen.
NN When the signal is weak, try other options until the best picture is
displayed.
Auto Visualisation: When changing analogue channels, displays signal
strength.
◀
NN Only available for analogue channels.
NN When the INFO button is pressed, the signal strength bar is displayed.
NN When bar is green, you are receiving the best possible signal.
●● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG
noise to provide improved picture quality.
English
▶
●● HDMI Black Level (Low / Normal): Selects the black level on the screen to
adjust the screen depth.
NN Available only in HDMI mode (RGB signals).
●● Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and
process film signals from all sources and adjust the picture for optimum
quality.
NN Available in TV mode, AV, COMPONENT (480i / 1080i) and HDMI (1080i).
◀
NN If the screen does not seem natural, change its option to Off / Auto1 /
Auto2 in Film Mode.
English
▶
■■ Reset Picture (OK / Cancel)
Resets your current picture mode to its default settings.
◀
▶
English
❑❑ Changing the Preset Sound Mode
OO MENUm → Sound → Sound Mode → ENTERE
■■ Sound Mode t
◀
●●
●●
●●
●●
●●
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Amplify: Increase the intensity of high-frequency sound to allow a better
listening experience for the hearing impaired.
NN If Speaker Select is set to External Speaker, Sound Mode is disabled.
English
▶
❑❑ Sound Systems, Etc.
OO MENUm → Sound → Sound Effect → ENTERE
■■ Sound Effect
(standard sound mode only)
Use the up and down arrow keys to select an option, and then press ENTERE.
●● SRS TruSurround HD (Off / On)
(standard sound mode only)
◀
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
technology.
●● SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialog can be heard more clearly.
English
▶
●● Equalizer
Use Equalizer to customize sound setting for each speaker.
Balance: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
level of specific bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
NN If Speaker Select is set to External Speaker, Sound Mode is disabled.
◀
▶
English
■■ Broadcast Audio Options
●● Audio Language
(digital channels only)
Change the default value for audio languages.
NN The available language may differ depending on the broadcast.
●● Audio Format
(digital channels only)
◀
When sound is emitted from both the main speaker and the audio receiver,
a sound echo may occur due to the decoding speed difference between
the main speaker and the audio receiver. In this case, use the TV Speaker
function.
NN Audio Format option may differ depending on the broadcast. 5.1ch
Dolby digital sound is only available when connecting an external speaker
through an optical cable.
English
▶
●● Audio Description
(not available in all locations) (digital channels only)
This function handles the Audio Stream for the AD (Audio Description) which
is sent along with the Main audio from the broadcaster.
NN Audio Description (Off / On): Turn the audio description function on or
off.
NN Volume: Adjust the audio description volume.
◀
▶
English
■■ Additional Setting
●● DTV Audio Level (MPEG / HE-AAC): (digital channels only) This function
allows you to reduce the disparity of a voice signal (which is one of the signals
received during a digital TV broadcast) to a desired level.
NN According to the type of broadcast signal, MPEG / HE-AAC can be
adjusted between -10dB and 0dB.
NN To increase or decrease the volume, adjust between the range 0 and -10
respectively.
◀
▶
English
●● SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital
sound, reducing interference going to speakers and various digital devices
such as a DVD player.
Audio Format: You can select the Digital Audio output(SPDIF) format. The
available Digital Audio output(SPDIF) format may differ depending on the input
source.
NN By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your
interactive 3D sound experience.
◀
Audio Delay: Correct audio-video sync problems, when watching TV or
video, and when listening to digital audio output using an external device such
as an AV receiver (0ms ~ 250ms).
English
▶
●● Dolby Digital Comp (Line / RF): This function minimizes signal disparity
between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC,
ATV Sound).
NN Select Line to obtain dynamic sound, and RF to reduce the difference
between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to
either -20dB or -31dB.
◀
RF: Set the output level for signals greater or less than -20dB (reference) to
either -10dB or -20dB.
English
▶
■■ Speaker Settings
●● Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to External
Speaker.
NN When Speaker Select is set to External Speaker, the volume and
MUTE buttons will not operate and the sound settings will be limited.
NN When Speaker Select is set to External Speaker.
◀
●● TV Speaker: Off, External Speaker: On
NN When Speaker Select is set to TV Speaker.
●● TV Speaker: On, External Speaker: On
NN If there is no video signal, both speakers will be mute.
English
▶
●● Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
NN To use the volume control on the source device connected to the TV as
shown below, set Auto Volume to Off on the TV. Otherwise, a change to
the volume control of the source device may not be applied.
◀
▶
English
■■ Reset Sound (OK / Cancel)
Reset all sound settings to the factory defaults.
◀
▶
English
❑❑ Selecting the Sound Mode
OO DUAL I-II → ENTERE
When you set to Dual I-II, the current sound mode is displayed on the screen.
A2 Stereo
◀
NICAM Stereo
Audio Type
Dual I-II
Mono
Mono
Stereo
Stereo ↔ Mono
Dual
Dual I ↔ Dual II
Mono
Mono
Stereo
Mono ↔ Stereo
Mono → Dual I
Dual
 Dual II 
Default
Automatic change
Dual I
Automatic change
Dual I
NNIf the stereo signal is weak and an automatic switching, occurs, then switch to
the mono.
NNOnly activated in stereo sound signal.
NNOnly available when the Source is set to TV.
English
▶
❑❑ Setting the Network
For LCD 550 series and above
■■ Network Settings
OO MENUm → Network → Network Settings → ENTERE
Set the network connection to use AllShare™ and perform software upgrade.
■■ Network Status
OO MENUm → Network → Network Status → ENTERE
◀
You can check the current network and Internet status.
■■ AllShare Settings
OO MENUm → Network → AllShare Settings → ENTERE
Selects whether to use the call arrivals text message contents, and schedules
set on the network. For details on set up options, refer to the “AllShare™”
instructions.
English
▶
❑❑ Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
●● You can attach your TV to your LAN by connecting the LAN port on the back
of your TV to an external modem using a LAN cable. See the diagram below.
TV Rear Panel
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
◀
▶
LAN Cable
Modem Cable
English
●● You can attach your TV to your LAN by connecting the LAN port on the back
of your TV to a IP Sharer which is connected to an external modem. Use LAN
cable for the connection. See the diagram below.
TV Rear Panel
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
◀
Modem Cable
IP Sharer
(having DHCP server)
LAN Cable
English
LAN Cable
▶
●● Depending on how your network is configured, you may be able to attach
your TV to your LAN by connecting the LAN port on the back of your TV
directly to a network wall outlet using a LAN cable. See the diagram below.
Note that the wall outlet is attached to a modem or router elsewhere in your
house.
TV Rear Panel
The LAN Port on the Wall
◀
▶
LAN Cable
English
●● If you have a Dynamic Network, you should use an ADSL modem or router
◀
that supports Dynamic Host Configuration Protocol (DHCP). Modems and
routers that support DHCP automatically provide the IP address, subnet mask,
gateway, and DNS values your TV needs to access the Internet so you do not
have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static
IP address, you must enter the IP address, subnet mask, gateway, and DNS
values manually on your TV’s Cable Setup Screen when you set up the
network connection. To get the IP address, subnet mask, gateway, and DNS
values, contact your Internet Service Provider (ISP). If you have a Windows
computer, you can also get these values through your computer.
NN You can use ADSL modems that support DHCP if your network requires
a Static IP address. ADSL modems that support DHCP also let you use
Static IP addresses.
NN A network speed of lower than 10 Mbps is not supported.
English
▶
■■ Network Setup (Auto)
Use the Automatic Network Setup when connecting your TV to a network that
supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
How to set up automatically
1. Go to Network Settings screen. To enter it, follow the directions of Network
Settings.
◀
2. Select the Wired.
▶
Network Settings
3. The network connection screen
appears, and network setting is
done.
Select a network connection type.
Wired
Wireless
(general)
WPS(PBC)
One Foot
Connection
Connect to the network using a LAN cable.
Please make sure that the LAN cable is
connected.
U Move
English
E Enter
e Exit
NN If it fails to set automatically, check
the connection of LAN port.
Network Settings
Wired network and Internet connection completed.
MAC Address
NN If you cannot find network
connection values or if you want
to set connection manually, set it
to Manual. Refer to following “How
to set up manually”.
192.168.10.21
Subnet Mask
255.255.255.0
Gateway
192.168.10.1
DNS Server
203.248.252.2
Internet is connected successfully.
If you have a problem with using Internet service, contact your Internet service
provider.
IP Settings
a Previous
◀
00:40:30:30:20:10
IP Address
OK
L Move
E Enter
R Return
▶
English
■■ Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these
steps:
1. Right click the Network icon on the bottom right of the screen.
◀
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network connection values
are displayed.
English
▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set up automatically” procedure.
2. Select the IP Settings on network test screen.
3. Set IP Mode to Manual.
IP Settings
4. Press the ▼ button on your remote
to go to the first entry field.
◀
IP Mode
►
Manual
IP Address
0
.
0
.
0
.
0
Subnet Mask
0
.
0
.
0
.
0
Gateway
0
.
0
.
0
.
0
.
0
DSN Mode
Manual
DNS Server
0
.
0
.
0
OK
U Move
English
E Enter
R Return
▶
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values.
Use the number buttons on your remote to enter numbers and the arrow
buttons to move from one entry field to another.
6. When done, select the OK.
7. The network connection screen appears, and network setting is done.
◀
▶
English
❑❑ Connecting to a Wireless Network
For LCD 550 series and above
To connect your TV to your network wireless, you need a wireless router or modem
and a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN),
which you connect to your TV’s back or side panel USB port. See the illustration
below.
Wireless IP sharer
(Wireless router having DHCP
Server)
◀
TV Side Panel
▶
The LAN Port on the Wall
Samsung Wireless
LAN Adapter
LAN Cable
English
or
Samsung’s Wireless LAN adapter is sold separately and is offered by select
retailers, Ecommerce sites. Samsung’s Wireless LAN adapter supports the IEEE
802.11a/b/g and n communication protocols. Samsung recommends using IEEE
802.11n. When you play video over a network connection, the video may
not be played smoothly.
NN NOTE
●● You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN,
WIS09ABGN2, WIS10ABGN) to use a wireless network.
◀
●● Samsung Wireless LAN Adapter and The USB extension Cable are sold
separately and are offered by select retailers and Ecommerce sites.
English
▶
●● To use a wireless network, your TV must be connected to a wireless IP
sharer (either a router or a modem). If the wireless IP sharer supports
DHCP, your TV can use a DHCP or static IP address to connect to the
wireless network.
●● Select a channel for the wireless IP sharer that is not currently being used.
If the channel set for the wireless IP sharer is currently being used by
another device nearby, this will result in interference and communication
failure.
◀
●● If you apply a security system other than the systems listed below, it will
not work with the TV.
English
▶
●● If HIGH PURE THROUGHPUT (Greenfield) 802.11n mode is selected
and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed)
for your wireless router, Samsung TVs will not support a connection in
compliance with new Wi-Fi certification specifications.
●● If your wireless router supports WPS (Wi-Fi Protected Setup), you can
connect to the network via PBC (Push Button Configuration) or PIN
(Personal Identification Number). WPS will automatically configure the
SSID and WPA key in either mode.
◀
▶
English
●● If your router, modem, or device is not certified, it may not connect to the
TV via the “Samsung Wireless LAN Adapter.”
●● Ensure the TV is turned off before you connect the Samsung Wireless
LAN Adapter.
●● Connection Methods: You can setup the wireless network connection on
five ways.
◀
––
––
––
––
––
Auto Setup (Using the Auto Network Search function)
Manual Setup
WPS (PBC)
▶
One Foot Connection
Ad hoc
●● The Samsung Wireless LAN Adapter may not be recognized when using
a connection via a USB hub or via a USB extension cable other than the
cable supplied.
English
Notice
The picture may appear corrupted or have static for some channels when the TV
is connected to the Samsung Wireless LAN Adapter. In such a case, establish a
connection using one of the following methods or connect the Samsung Wireless LAN
Adapter using a USB cable in a place that is not affected by radio interference.
Method 1
Connect using the USB right angle adapter To connect the Samsung Wireless LAN
Adapter using the USB right angle adapter, follow these steps:
◀ 1. Connect the USB right angle adapter to the
Samsung Wireless LAN Adapter.
2. Connect the other end of the right angle
adapter to the USB (HDD) port.
English
▶
Method 2
Connect via an extension cable
To reconnect the Samsung Wireless LAN
Adapter using the extension cable, follow these
steps:
or
1. Connect the extension cable to the USB
(HDD) port.
◀
2. Connect the extension cable and Samsung
Wireless LAN Adapter.
3. Attach the Samsung Wireless LAN Adapter to the back of the TV near the top,
using double-sided adhesive tape.
NN The Samsung Wireless LAN Adapter should be installed in an interferencefree area in order to avoid interference between the adapter and tuner.
English
▶
■■ Network Setup (Auto)
Most wireless networks have an optional security system that requires devices
that access the network to transmit an encrypted security code called an Access
or Security Key. The Security Key is based on a Pass Phrase, typically a word or a
series of letters and numbers of a specified length you were asked to enter when
you set up security for your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your wireless network, you
will have to enter the Pass Phrase during the setup process.
◀
How to set up automatically
1. Go to Network Settings screen. To enter it, follow the directions of Network
Settings.
English
▶
2. Select the Wireless(general).
Network Settings
Select a network connection type.
3. The Network function searches
for available wireless networks.
When done, it displays a list of
the available networks.
◀
Wired
Wireless
(general)
WPS(PBC)
4. In the list of networks, press
the ▲ or ▼ button to select a
network, and then press the
ENTERE button.
Set up wireless network by selecting your wireless router.
You may need to enter security key depending on the
setting of the wireless router.
One Foot
Connection
U Move
E Enter
R Return
NN If the wireless router is set to Hidden (Invisible), you have to select Add
Network and enter the correct network Name (SSID) and Security key to
establish the connection.
5. If the Security screen pop-up appears, go to step 6. If you select the wireless
router which does not have security, go to step 7.
English
▶
6. If the wireless router has security,
enter the Security key(Security or
PIN), then select Done.
Network Settings
Enter security key.
NN When you enter the Security
key(Security or PIN), use
▲/▼/◄ /► buttons on your
remote to select number/
characters.
◀
0 entered
a
b
c
d
e
f
1
2
3
g
h
i
j
k
l
4
5
6
m
n
o
p
q
r
7
8
9
s
t
u
v
w
x
y
z
0
a/A
F
Delete
a Previous
Space
n Move
E Enter
Done
R Return
NN You should be able to find the
Pass Phrase on one of the set up screens you used to set up your router
or modem.
7. The network connection screen appears, and network setting is done.
NN If it fails to set Security key(Security or PIN), select Retry or IP Settings.
NN If you want to set connection manually, select the IP Settings. Refer to
following “How to set up manually”.
English
▶
■■ Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these
steps:
1. Right click the Network icon on the bottom right of the screen.
◀
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network connection values
are displayed.
English
▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 7 in the “How to set up automatically” procedure.
2. Select the IP Settings on network test screen.
3. Set IP Mode to Manual.
4. Press the ▼ button on your remote to go to the first entry field.
◀
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values.
Use the number buttons on your remote to enter numbers and the arrow
buttons to move from one entry field to another.
6. When done, select the OK.
7. The network connection screen appears, and network setting is done.
English
▶
■■ Network Setup (WPS(PBC))
How to set up using WPS(PBC)
If your router has a WPS (PBS) button, follow these steps:
1.Go to Network Settings screen. To enter it, follow the directions of Network
Settings.
2. Select the WPS(PBC).
◀
Network Settings
3.Press the WPS(PBC) button on
your router within 2 minutes. Your
TV automatically acquires all the
network setting values it needs
and connects to your network.
4.The network connection screen
appears, and network setting is
done.
English
Select a network connection type.
Wired
▶
Wireless
(general)
WPS(PBC)
One Foot
Connection
Connect to the wireless router easily by pressing the
WPS(PBC) button. Choose this if your wireless router
supports Push button configuration(PBC).
U Move
E Enter
R Return
■■ Network Setup (One Foot Connection)
The One Foot Connection make you easy to connect samsung TV and samsung
wireless router by placing samsung wireless router within 1foot(25cm) from
samsung TV. If your wireless router does not support One Foot Connection, you
must connect using one of the other methods.
NN You can check for equipment that supports One Foot Connection on www.
samsung.com.
How to set up using One Foot Connection
◀
Turn on the power of wireless router and TV.
1.Go to Network Settings screen. To enter it, follow the directions of Network
Settings.
English
▶
2.Select the One Foot Connection.
3.Place the wireless router in parallel
with the Samsung Wireless LAN
Adapter giving a gap no larger
than 25cm.
4. Wait until the connection is
automatically established.
◀
Network Settings
Select a network connection type.
Wired
Wireless
(general)
WPS(PBC)
One Foot
Connection
Connect to wireless network automatically if your
wireless router supports One Foot Connection. Select this
connection type after placing the wireless router within 10
inches(25 cm) of your TV.
U Move
E Enter
R Return
5. The network connection screen
appears, and network setting is done.
6. Place the wireless router in a desired location.
NN If the wireless router settings change or you install a new wireless router,
you must perform the One Foot Connection procedure again, beginning
from Step 1.
English
▶
■■ Network Setup (Ad-Hoc)
You can connect to a mobile device supporting Ad-hoc without an wireless router
through the “Samsung Wireless LAN Adapter”. When connecting mobile device,
you can use files on device or connect internet using AllShare or Multimedia
function.
How to connect to new Ad-hoc
1. Go to Network Settings screen. To enter it, follow the directions of Network
Settings.
◀
▶
2. Select the Wireless(general).
3. When select the Ad hoc, the message "Ad hoc service supports a direct
connection with Wi-Fi compatible devices like a cell phone or PC. The
existing network system may have limited functionality. Do you want to
change the network connection?". is displayed.
English
4. Input the generated Network Name (SSID) and Security Key into the
device you want to connect.
NN If network does not operate normally, check the Network Name (SSID)
and Security key again. An incorrect Security key may cause a
malfunction.
NN If a device is connected once, it is displayed in Network Setting list.
When you connect it again, you can find it in network setting list.
◀
▶
English
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because your ISP has permanently
registered the MAC address (a unique identifying number) of your PC or modem, which
it then authenticates each time you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC address, your ISP can not
authenticate its MAC address, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures required to connect devices
other than a PC (such as your TV) to the Internet.
◀
If your Internet service provider requires an ID or password to connect to the Internet,
your TV may not be able to connect to the Internet. If this is the case, you must enter
your ID or password when connecting to the Internet.
The internet connection may fail because of a firewall problem. If this is the case, contact
your Internet service provider.
If you cannot connect to the Internet even after you have followed the procedures of
your Internet service provider, please contact Samsung Electronics.
English
▶
❑❑ Setting the Time
OO MENUm → System → Time → ENTERE
■■ Time
NN The current time will appear every time you press the INFO button.
●● Clock: Setting the clock is for using various timer features of the TV.
NN If you disconnect the power cord, you have to set the clock again.
Clock Mode: Set up the current time manually or automatically.
◀
–– Auto: Set the current time automatically using the time from a digital
channel.
NN The antenna must be connected in order to set the time automatically.
English
▶
–– Manual: Set the current time manually.
NN Depending on the broadcast station and signal, the auto time set up may
not be correct. In this case, set the time manually.
Clock Set: Set the Day, Month, Year, Hour and Minute manually.
NN Available only when Clock Mode is set to Manual.
Time Zone (depending on the country): Select your time zone.
NN This function is only available when the Clock Mode is set to Auto.
◀
NN When selecting Manual in Time Zone, GMT and DST will be activated.
English
▶
❑❑ Using the Sleep Timer
OO MENUm → System → Time → Sleep Timer → ENTERE
●● Sleep Timer t: Automatically shuts off the TV after a preset period of
time. (30, 60, 90, 120, 150 and 180 minutes).
NN To cancel Sleep Timer, select Off.
❑❑ Setting the On / Off Timer
◀
OO MENUm → System → Time → On
Timer <or> Off Timer → ENTERE
●● On Timer 1 / On Timer 2 / On Timer
3: Three different on timer settings
can be made. You must set the clock
first.
On Timer 1
Setup
Sun
Mon
Tue
▶
Wed
Thu
Fri
Sat
Once
Volume
On Time
04
Source
TV
00
20
Antenna
ATV
Channel
3
U Adjust L Move E Enter R Return
English
–– Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at your convenience. If you select Manual, you can set up
the day you want to activate the timer.
NN The c mark indicates the day is selected.
–– On Time: Set the hour, minute.
–– Volume: Set the desired volume level.
–– Source: Select TV or USB content to be played when the TV is turned on
◀
automatically. (USB can be selected only when a USB device is connected
to the TV)
–– Antenna (when the Source is set to TV): Select ATV or DTV.
–– Channel (when the Source is set to TV): Select the desired channel.
–– Music / Photo (when the Source is set to USB): Select a folder in the
USB device containing music or photo files to be played when the TV is
turned on automatically.
English
▶
NN NOTE
●● If there is no music file on the USB device or the folder containing
a music file is not selected, the Timer function does not operate
correctly.
●● When there is only one photo file in the USB device, the Slide
Show will not play.
●● If a folder name is too long, the folder cannot be selected.
●● Each USB you use is assigned its own folder. When using
◀
more than one of the same type of USB, make sure the folders
assigned to each USB have different names.
●● It is recommended that you use a USB memory stick and a multi
card reader when using On Timer.
●● The On Timer function may not work with USB devices
with a built-in battery, MP3 players, or PMPs made by some
manufacturers because these devices take a long time to be
recognized.
English
▶
●● Off Timer 1 / Off Timer 2 / Off Timer 3:
Three different off timer settings can be
made. You must set the clock first.
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at you convenience. If
you select Manual, you can set up the
day you want to activate the timer.
◀
NN The c mark indicates the day is
selected.
Off Time: Set the hour, minute.
English
Off Timer 1
Setup
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Once
Off Time
04
00
L Move U Adjust E Enter R Return
▶
❑❑ Locking Programme
OO MENUm → System → Security → ENTERE
■■ Security
NN The PIN input screen appears before the setup screen.
NN Enter your 4-digit PIN. Change the PIN using the Change PIN option.
●● Channel Lock (Off / On): Lock channels in Channel Manager, to prevent
unauthorized users, such as children, from watching unsuitable programme.
◀
NN Only available when the Input source is set to TV.
English
▶
●● Programme Rating Lock (depending on the country): Prevent unauthorized
users, such as children, from watching unsuitable programme with a userdefined 4-digit PIN code. If the selected channel is locked, the “\” symbol will
be displayed.
NN The items of Program Rating Lock differs depending on the country.
●● Change PIN: Change your personal ID number required to set up the TV.
●● Adult Services (Off / On): You can adjust the Adult Service. (UK only)
◀
NN The Adult Services is available for Freesat antenna only.
English
▶
❑❑ Picture In Picture (PIP)
OO MENUm → System → PIP → ENTERE
■■ PIP t
You can watch the TV tuner and one external video source simultaneously. PIP
(Picture-in-Picture) does not function in the same mode.
NN NOTE
◀
●● For PIP sound, refer to the Sound Select instructions.
●● If you turn the TV off while watching in PIP mode, the PIP window will
disappear.
●● You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
English
▶
●● PIP settings
◀
●●
●●
●●
●●
●●
Main picture
Sub picture
Component, HDMI, PC
TV
PIP (Off / On): Activate or deactivate the PIP function.
Channel: Select the channel for the sub-screen.
Size (Õ / Ã): Select a size for the sub-picture.
Position (à / – / — / œ): Select a position for the sub-picture.
Sound Select (Main / Sub): You can choose the desired sound (Main /
Sub) in PIP mode.
English
▶
❑❑ Economical Solutions
OO MENUm → System → Eco Solution → ENTERE
■■ Eco Solution
●● Energy Saving (Off / Low / Medium / High / Picture Off) t: This
adjusts the brightness of the TV in order to reduce power consumption. If you
select Picture Off, the screen is turned off, but the sound remains on. Press
any button except volume button to turn on the screen.
◀
●● Eco Sensor (Off / On)
: To enhance your power
savings; the picture settings will automatically adapt to the light in the room.
for LCD 550 series and above
NN If you adjust the Backlight, the Eco Sensor will be set to Off.
Min Backlight: When Eco sensor is On, the minimum screen brightness can
be adjusted manually.
NN If Eco Sensor is On, the display brightness may change (become slightly
darker or brighter) depending on the surrounding light intensity.
English
▶
●● No-Signal Power Off (Off / 15 min / 30 min / 60 min):
To avoid unnecessary energy consumption, set how long you want the TV to
remain on if it’s not receiving a signal.
NN Disabled when the PC is in power saving mode.
●● Auto Power Off (Off / On): The TV will be automatically turned off when no
user operation is received for 4 hours.
◀
▶
English
❑❑ Other Features
OO MENUm → System → ENTERE
■■ Language
●● Menu Language: Set the menu language.
●● Teletext Language(depending on the country): Set a desired language for
teletext.
NN English is the default in cases where the selected language is unavailable
◀
in the broadcast.
●● Preference (Primary Audio Language / Secondary Audio Language /
Primary Subtitle Language / Secondary Subtitle Language / Primary
Teletext Language / Secondary Teletext Language): Select a language,
which will be the default language when a channel is selected.
NN Primary Teletext Language and Secondary Teletext Language may
not be supported in some locations.
English
▶
■■ Subtitle
Use this menu to set the Subtitle mode.
●● Subtitle (Off / On): Switches subtitles on or off.
●● Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode.
●● Subtitle Language: Sets the subtitle language.
NN If the programme you are watching does not support the Hearing
Impaired function, Normal automatically activates even if the Hearing
Impaired mode is selected.
◀
NN English is the default in cases where the selected language is unavailable ▶
in the broadcast.
English
■■ Digital Text (Disable / Enable)
(UK only)
If the programme broadcasts with digital text, this feature is enabled.
NN MHEG (Multimedia and Hypermedia Information Coding Experts Group)
◀
An International standard for data encoding systems used in multimedia
and hypermedia. This is at a higher level than the MPEG system which
includesdata-linking hypermedia such as still images, character service,
animation, graphic and video files as well as multimedia data. MHEG is user
runtime interaction technology and is being applied to various fields including
VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce),
teleeducation, tele-conferencing, digital libraries and network games.
English
▶
■■ Auto Protection Time
●● Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the
screen remains idle with a still image for a certain period of time defined by the
user, the screen saver is activated to prevent the formation of ghost images
on the screen.
◀
▶
English
■■ General
●● Game Mode (Off / On): When connecting to a game console such as
PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game mode.
NN NOTE
●● Precautions and limitations for game mode
–– To disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
◀
–– If you display the TV menu in Game Mode, the screen shakes ▶
slightly.
●● Game Mode is not available in PC and TV mode.
English
●● After connecting the game console, set Game Mode to On to
prevent poor picture quality.
●● If Game Mode is On:
–– Picture Mode is set to Standard and Sound Mode is set to
Movie.
●● Menu Transparency (Bright / Dark): Set the Transparency of the menu.
●● Boot Logo (Off / On): Display Samsung logo when the TV is turned on.
●● TV name for LCD 550 series and above : Make changes the TV name.
◀
NN If you select User Input, you can make TV name manually.
English
▶
■■ Anynet+(HDMI-CEC)
For details on set up options, refer to the “Anynet+(HDMI-CEC)” instructions.
◀
▶
English
■■ DivX® Video On Demand
Shows the registration code authorized for the TV. If you connect to the DivX web
site and register, you can download the VOD registration file. If you play the VOD
registration using My Downloads, the registration is completed.
NN For more information on DivX® VOD, visit “http://vod.divx.com”.
◀
▶
English
■■ Common Interface
●● CI Menu: This enables the user to select from the CAM-provided menu.
Select the CI Menu based on the menu PC Card.
●● Application Info: View information on the CAM inserted into the CI slot and
on the “CI or CI+ CARD” which is inserted into the CAM. You can install the
CAM anytime whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by phone.
◀
2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the
arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the common interface
slot, in the direction of the arrow so that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal channel.
English
▶
■■ Network Remote Control
for LCD 550 series and above
Turn on/off or give permission to Samsung mobile phones devices to connect
with and control the TV.
You must have a Samsung Mobile phone/device which supports Network Remote
Control. For more details, refer to each device’s manual.
◀
▶
English
❑❑ Support Menu
OO MENUm → Support → e-Manual → ENTERE
■■ e-Manual
You can read the introduction and instructions about the TV features stored in
your TV.
NN For the detailed information about e-Manual Screen, refer to “How to view the
e-Manual” in User Manual.
◀
▶
English
■■ Self Diagnosis
NN Self Diagnosis might take few seconds, this is part of the normal operation
of the TV.
●● Picture Test (Yes / No): Use to check for picture problems.
●● Sound Test (Yes / No): Use the built-in melody sound to check for sound
problems.
NN If you hear no sound from the TV’s speakers, before performing the
◀
sound test, make sure Speaker Select is set to TV Speaker in the
Sound menu.
NN The melody will be heard during the test even if Speaker Select is set to
External Speaker or the sound is muted by pressing the MUTE button.
English
▶
●● Signal Information: (digital channels only) HDTV channel’s reception quality is
either perfect or the channels are unavailable. Adjust your antenna to increase
signal strength.
●● Troubleshooting: If the TV seems to have a problem, refer to this description.
NN If none of these troubleshooting tips apply, contact the Samsung
customer service centre.
◀
▶
English
■■ Software Upgrade
Software Upgrade can be performed
by downloading the latest firmware from
“www.samsung.com” to a USB memory
device.
Current Version the software already
installed in the TV.
NN Software is represented as “Year/
◀
Software Upgrade
Current Version
2011/01/18_000001
By USB
By Online
By Channel
Alternative Software
----/--/--_------
Standby Mode Upgrade
: Off
Month/Day_Version”.
U Move E Enter R Return
* It may differ depending on the model.
English
▶
Installing the Latest Version
●● By USB: Insert a USB drive containing the
◀
TV Side Panel
firmware upgrade file, downloaded from
“www.samsung.com,” into the TV. Please
be careful not to disconnect the power
or remove the USB drive until upgrades
are complete. The TV will be turned off
and on automatically after completing
* It may differ depending on the model.
the firmware upgrade. When software is
upgraded, video and audio settings you
have made will return to their default settings. We advise you to to write down
your settings so that you can easily reset them after the upgrade.
English
▶
●● By Online
for LCD 550 series and above
: Upgrade the software using the Internet.
NN First, configure your network. For detailed procedures on using the
Network Setup, refer to the “Network Connection” instructions.
NN If the internet connection doesn’t operate properly, the connection may
be broken. Please retry downloading. If the problem persists, download
by USB and upgrade.
●● By Channel: Upgrade the software using the broadcasting signal.
◀
NN If the function is selected during the software transmission period,
software will be automatically searched and downloaded.
NN The time required to download the software is determined by the signal
status.
English
▶
●● Alternative Software (backup)
: If there is an issue
with the new firmware and it is affecting operation, you can change the
software to the previous version.
for LCD 450 series and above
NN If the software was changed, existing software is displayed.
●● Standby Mode Upgrade (Off / 1 hour later / 2 hours later/ 00:00 /
◀
02:00 / 12:00 / 14:00) for LCD 450 series and above : A manual upgrade will be
automatically performed at selected time. Since the power of the unit is
turned on internally, the screen may be turned on slightly for the product. This
phenomenon may continue for more than 1 hour until the software upgrade is
complete.
English
▶
■■ Contact Samsung
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information regarding our call centres, and
how to download products and software.
■■ Contents Home
You can enjoy useful and various contents.
◀
▶
English
❑❑ Using the My Downloads
Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC)
device and/or your PC.
1. Press the CONTENT button to select My Downloads.
2. Press ▲/▼ button to select desired My Downloads
menu (Videos, Photos, Music),
then press the ENTERE button.
Source
◀
Videos
Photos
Music
Watch TV
* It may differ depending on the model.
English
▶
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo,
music and/or movie files to the USB jack
on the side of the TV.
3. When USB is connected to the TV,
popup window appears. Then you can
select New device connected.
◀
English
TV Side Panel
* It may differ depending on the model.
▶
NN It might not work properly with unlicensed multimedia files.
NN Need-to-Know List before using My Downloads
●● MTP (Media Transfer Protocol) is not supported.
●● The file system supports FAT16, FAT32 and NTFS.
●● Certain types of USB Digital camera and audio devices may not be compatible
with this TV.
●● My Downloads only supports USB Mass Storage Class (MSC) devices.
◀
MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC
are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
●● Before connecting your device to the TV, please back up your files to prevent
them from damage or loss of data. SAMSUNG is not responsible for any data
file damage or data loss.
English
▶
●● USB (HDD) is not supported. for LCD 400, 450 series
●● Connect a USB HDD to the dedicated port, USB 1 (HDD) port.
for LCD 550 series and above
●● Do not disconnect the USB device while it is loading.
●● The higher the resolution of the image, the longer it takes to display on the
screen.
●● The maximum supported JPEG resolution is 15360 x 8640 pixels.
●● For unsupported or corrupted files, the “Not Supported File Format” message
◀
is displayed.
●● If the files are sorted by Folder View, up to 1000 files can be displayed in
each folder.
English
▶
●● MP3 files with DRM that have been downloaded from a non-free site cannot
be played. Digital Rights Management (DRM) is a technology that supports
the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the
content providers, the prevention of the illegal copying of contents, as well as
managing billings and settlements.
●● If more than 2 PTP devices are connected, you can only use one at a time.
●● If more than two MSC devices are connected, some of them may not be
◀
recognized. A USB device that requires high power (more than 500mA or 5V)
may not be supported.
English
▶
●● If an over-power warning message is displayed while you are connecting or
using a USB device, the device may not be recognized or may malfunction.
●● If the TV has been no input during time set in Auto Protection Time, the
Screensaver will run.
●● The power-saving mode of some external hard disk drives may be released
automatically when connected to the TV.
◀
▶
English
●● If a USB extension cable is used, the USB device may not be recognized or
the files on the device may not be read.
●● If a USB device connected to the TV is not recognized, the list of files on the
device is corrupted or a file in the list is not played, connect the USB device to
the PC, format the device and check the connection.
●● If a file deleted from the PC is still found when My Downloads is run, use the
“Empty the Recycle Bin” function on the PC to permanently delete the file.
◀
●● My Downloads only supports sequential jpeg format.
●● The scene search and thumbnail functions are not supported in the Videos.
●● If the number of files and folders saved on a USB storage device is
approximately over 4000, the files and folders may not appear and some
folders may not be opened.
English
▶
❑❑ Connecting to the PC through network for LCD 550 Series and above
You can play pictures, music and videos saved on your PC or on your TV through
a network connection in the My Downloads mode.
NN If you want to use My Downloads to play files saved on your PC over your
TV, you should download “AllShare PC Software” and users manual from
“www.samsung.com.”
1. For more information on how to configure your network, refer to ‘Network
Connection’.
◀
–– You are recommended to locate both TV and PC in same subnet. The
first 3 parts of the IP address of the TV and PC should be the same and
only the last part (the host address) should be changed. (e.g. IP Address:
123.456.789.**)
English
▶
2. Using a LAN cable, connect between the external modem and the PC onto
which the AllShare PC Software programme will be installed.
–– You can connect the TV to the PC directly without connecting it through a
Sharer (Router).
NN Functions that are not supported when connecting to a PC through a
network:
●● The Background Music and Background Music Setting functions.
●● The � (REW) or µ (FF) button while a movie is playing.
◀ NN The DivX DRM, Multi-audio, embedded caption does not supported.
▶
NN AllShare PC Software should be permitted by the firewall programme on your PC.
English
NN When you use My Downloads mode through a network connection, according
to functions of the provided server:
●● The sorting method may vary.
●● The � (REW), µ (FF) or � (Pause) buttons may not work depending on
the content information.
NN If you experience any file stuttering issue while playing a video over a wireless
network, we recommend using a wired network.
◀
▶
English
❑❑ Screen Display
Move to the desired file using the ◄/►/▲/▼ buttons and then press the
ENTERE or � (Play) button. The file is played. My Downloads screen may
differ depending on the way to enter the screen.
◀
Information:
You can ascertain the
selected device name,
contents mode, folder/
file name, page and
sorting list.
Videos
1/1 page
File List Section:
You can confirm the
files and groups that are
sorted by category.
Page
Contents mode / Device name:
You can select the desired
Contents mode or Device name.
T Tools
R Return
Operation Buttons:
A B (Edit
D Mode); Selects the desired music. The check
- C Yellow
box is shown in the screen to check the music you want. It is only
available in Music.
(Page); Move to next or previous page.
- T Tools; Displays the option menu.
- R Return; Move to the previous step.
English
▶
■■ Videos
Playing Video
1. Press the ◄/►/▲/▼ button to
select the desired video in the file
list.
2. Press the ENTERE button or
� (Play) button.
◀
–– The selected file name is
displayed on the top with its
playing time.
L Jump
T Tools
R Return
–– If video time information is unknown, play time and progress bar are not
displayed.
English
▶
–– During video playback, you can search using ◄ and ► button.
–– You can use (�) (REW) and (µ) (FF) buttons during playback.
NN In this mode, you can enjoy movie clips contained on a Game, but you
cannot play the Game itself.
●● Supported Subtitle Formats
◀
Name
File extension
Format
MPEG-4 time-based text
.ttxt
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
English
▶
●● Supported Video Formats
File Extention
*.avi
*.mkv
◀
Container
AVI
MKV
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
DivX 3.11/4.
x/5.1/6.0
1920 x 1080
6 ~ 30
8
XviD
1920 x 1080
6 ~ 30
8
H.264 BP/MP/
HP
1920 x 1080
6 ~ 30
25
MPEG4 SP/ASP
1920 x 1080
6 ~ 30
8
Motion JPEG
640 x 480
6 ~ 30
8
English
Audio Codec
MP3 / AC3 /
LPCM / ADPCM /
DTS Core
▶
File Extention
*.asf
Container
ASF
◀
*.wmv
ASF
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
DivX 3.11/4.
x/5.1/6.0
1920 x 1080
6 ~ 30
8
XviD
1920 x 1080
6 ~ 30
8
H.264 BP/MP/
HP
1920 x 1080
6 ~ 30
25
MPEG4 SP/ASP
1920 x 1080
6 ~ 30
8
Motion JPEG
640 x 480
6 ~ 30
8
1920 x 1080
6 ~ 30
25
Window Media
Video v9
English
Audio Codec
MP3 / AC3 /
LPCM / ADPCM /
WMA
▶
WMA
File Extention
Container
Video Codec
H.264 BP/MP/
HP
*.mp4
MP4
MPEG4 SP/
ASP
XVID
H.264 BP/MP/
◀
*.3gp
3GPP
HP
MPEG4 SP/
*.vro
VOB
Frame rate
(fps)
Bit rate
(Mbps)
1920 x 1080
6 ~ 30
25
Audio Codec
MP3 / ADPCM /
1920 x 1080
6 ~ 30
8
1920 x 1080
6 ~ 30
8
1920 x 1080
6 ~ 30
25
1920 x 1080
6 ~ 30
8
MPEG2
1920 x 1080
24/25/30
30
MPEG1
1920 x 1080
24/25/30
30
ASP
VRO
Resolution
English
AAC
ADPCM / AAC /
HE-AAC
AC3 / MPEG /
LPCM
▶
File Extention
*.mpg
*.mpeg
◀
Container
PS
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
MPEG1
1920 x 1080
24/25/30
30
MPEG2
1920 x 1080
24/25/30
30
H.264
1920 x 1080
6 ~ 30
25
MPEG2
1920 x 1080
24/25/30
30
AC3 / MPEG /
LPCM / AAC
AC3 / AAC /
*.ts
*.tp
Audio Codec
TS
H.264
1920 x 1080
6 ~ 30
25
MP3 / DD+ /
HE-AAC
*.trp
VC1
1920 x 1080
English
6 ~ 30
25
▶
Other Restrictions
NN NOTE
●● Video content will not play, or not play correctly, if there is an error in the
content or the container.
●● Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
◀
●● If the Index Table is in error, the Seek (Jump) function is not supported.
●● When playing the video through network, it may not work depending on
the network status. When you play video over a network connection, the
video may not be played smoothly. for LCD 550 series and above
●● The menu can be displayed late if the video is over 10Mbps(bit rate).
●● Some USB/digital camera devices may not be compatible with the player.
●● Video content can not be played, if there are many contents in one file.
English
▶
Video Decoder
●●
●●
Supports up to H.264, Level 4.1
●●
XVID, MPEG4 SP, ASP:
●●
GMC is not support.
Audio Decoder
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4
and AVCHD are not supported.
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
◀
●●
●●
Supports up to WMA 7, 8, 9, STD, 9 PRO
●●
WMA sampling rate 22050 Hz mono is not
WMA Lossless, Voice Lossless, Voice is
not supported.
supported.
▶
English
■■ Music
Playing Music
1. Press the ◄/►/▲/▼ button to
select the desired Music in the file
list.
Music
2. Press the ENTERE button or
� (Play) button.
◀
–– You can use � (REW)
▶
and µ (FF) buttons during
playback.
E Pause L Pages T Tools R Return
English
NN Only displays the files with MP3 file extension. Other file extensions are not
displayed, even if they are saved on the same USB device.
NN If the sound is abnormal when playing MP3 files, adjust the Equalizer in the
Sound menu. (An over-modulated MP3 file may cause a sound problem.)
Playing selected music
1. Press the
C
A B Mode)
D
(Edit
button.
2. Select the desired music.
◀
NN The check box appears to the left of the selected files.
3. Press the TOOLS button and select Play Selected Contents.
NN You can select or deselect all music pressing the Select All / Deselect
All.
English
▶
■■ Photos
Viewing a Photo (or Slide Show)
1. Press the ◄/►/▲/▼ button to
select the desired photo in the file
list.
Nomal
2. Press the ENTERE button.
●● When a selected photo
◀
is displayed, press the
ENTERE button to start the
slide show.
E Pause L Previous/Next T Tools R Return
●● During the slide show, all files in the file list will be displayed in order.
NN When you press the � (Play) button in the file list, slide show will be
started immediately.
English
▶
NN Music files can be automatically played during the Slide Show if the
Background Music is set to On.
❑❑ My Downloads - Additional Functions
Videos/Music/Photos Play Option menu
During playing a file, press the TOOLS button.
Category
◀
Operation
Videos
Title Search
You can move the other file
directly.
c
Time Search
You can search the video using
◄ and ► button at one minute
interval or entering the number
directly.
c
Shuffle Mode
You can play the music randomly.
English
Music
Photos
▶
c
Category
◀
Operation
Videos
Music
c
Repeat Mode
You can play movie and music
files repeatedly.
c
Picture Size
You can adjust the picture size to
your preference.
c
Picture Mode
You can adjust the picture
setting.
c
Sound Mode
You can adjust the sound setting.
c
English
Photos
c
c
c
▶
Category
Operation
You can enjoy video in one
of supported languages as
required. The function is only
Subtitle Language
enabled when stream-type files
which support multiple audio
formats are played.
◀
Subtitle Setting
You can play the video with
Subtitles. This function only
works if the subtitles are the
same file name as the video.
English
Videos
Music
Photos
c
c
▶
Category
Start Slide Show /
Operation
Videos
Music
Photos
You can start or pause a Slide
Show.
c
You can select the slide show
speed during the slide show.
c
You can on/off background
Background Music music when watching a Slide
Show.
c
Pause Slide Show
Slide Show Speed
◀
▶
English
Category
Operation
Videos
Music
You can select background
Background Music
music when watching a Slide
Setting
Show.
◀
Photos
c
Zoom
You can zoom into images in full
screen mode.
c
Rotate
You can rotate images in full
screen mode.
c
Information
You can see detailed information
about the played file.
English
c
c
c
▶
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that
support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used
only with Samsung devices that have the Anynet+ feature. To be sure your Samsung
device has this feature, check if there is an Anynet+ logo on it.
NN For the method of connecting external devices, refer to the supported user
manual.
NN NOTE
◀
●● Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack
on your TV and the Digital Audio Input on the Home Theatre.
English
▶
●● When following the connection above, the Optical jack only outputs 2 channel
audio. You will only hear sound from the Home Theatre’s Front Left and Right
speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e.
Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.
●● You can connect only one Home Theatre.
●● You can connect an Anynet+ device using the HDMI cable. Some HDMI
cables may not support Anynet+ functions.
◀
●● Anynet+ works when the AV device supporting Anynet+ is in the standby or
on status.
●● Anynet+ supports up to 12 AV devices in total. Note that you can connect up
to 3 devices of the same type.
English
▶
Anynet+ Menu
OO TOOLST → Anynet+ (HDMI-CEC) → ENTERE
The Anynet+ menu changes depending on the type and status of the Anynet+ devices
connected to the TV.
Anynet+ Menu
View TV
◀
Device List
(device_name)
MENU
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is
connected, the disc menu of the DVD recorder will appear.
English
▶
◀
Anynet+ Menu
Description
(device_name)
TOOLS
Shows the play menu of the connected device. E.g. If a DVD
recorder is connected, the play menu of the DVD recorder will
appear.
Shows the title menu of the connected device. E.g. If a DVD
(device_name) Title recorder is connected, the title menu of the DVD recorder will
appear.
Menu
NN Depending on the device, this menu may not be available.
Receiver
Sound is played through the receiver.
English
▶
❑❑ Setting Up Anynet+
OO MENUm → System → Anynet+ (HDMI-CEC) → ENTERE
■■ Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMICEC) must be set to On.
NN When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related
◀
operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically
when the TV is turned off.
NN If Auto Turn Off is set to Yes, running external devices will turn off at the
same time as the TV powers off.
NN May not be enabled depending on the device.
English
▶
❑❑ Switching between Anynet+ Devices
1. Press the TOOLS button, then select Anynet+ (HDMI-CEC).
2. Anynet+ devices connected to the TV are listed in Device List.
C
NN If you cannot find a device you want, press the
A
B
Dto refresh the list.
button
3. Select a device and press the ENTERE button. You can switch to the selected
device.
NN Only when you set Anynet+ (HDMI-CEC) to On in the System menu, the
◀
Device List menu appears.
●● Switching to the selected device may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
●● If you have selected external input mode by pressing the SOURCE
button, you cannot use the Anynet+ function. Make sure to switch to an
Anynet+ device by using the Device List.
English
▶
❑❑ Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV
speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
NN If your receiver supports audio only, it may not appear in the device list.
NN The receiver will work when you have properly connected the optical in
◀
jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
NN When the receiver (i.e Home Theatre) is set to On, you can hear sound
output from the TV’s Optical jack. When the TV is displaying a DTV (air)
signal, the TV will send out 5.1 channel sound to the receiver. When the
source is a digital component such as a DVD and is connected to the TV
via HDMI, only 2 channel sound will be heard from the receiver.
English
▶
NN NOTE
●● You can only control Anynet+ devices using the TV remote control, not
the buttons on the TV.
●● The TV remote control may not work under certain conditions. If this
occurs, reselect the Anynet+ device.
◀
▶
English
❑❑ Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
●● Check if the device is an Anynet+ device. The Anynet+
system supports Anynet+ devices only.
●● Only one receiver (home theatre) can be connected.
●● Check if the Anynet+ device power cord is properly
connected.
◀
●● Check the Anynet+ device’s Video/Audio/HDMI cable
connections.
●● Check whether Anynet+ (HDMI-CEC) is set to On in
the System menu.
English
▶
Problem
Anynet+ does not work.
Possible Solution
●● Check whether the TV remote control is in TV mode.
●● Check whether the remote control is Anynet+
compatible.
●● Anynet+ does not work in certain situations. (Searching
channels, operating My Downloads or Plug & Play
(initial setup), etc.)
◀
●● When connecting or removing the HDMI cable, please
make sure to search devices again or turn your TV off
and on again.
●● Check if the Anynet+ Function of Anynet+ device is set
on.
English
▶
Problem
I want to start Anynet+.
Possible Solution
●● Check if the Anynet+ device is properly connected to
the TV and check if the Anynet+ (HDMI-CEC) is set to
On in the System menu.
●● Press the TOOLS button to display the Anynet+ menu
and select a menu you want.
I want to exit Anynet+.
◀
●● Select View TV in the Anynet+ menu.
●● Press the SOURCE button on the TV remote control
and select a device other than Anynet+ devices.
●● Press > CH <, CH LIST and PRE-CH to change
the TV mode. (Note that the channel button operates
only when a tuner-embedded Anynet+ device is not
connected.)
English
▶
Problem
Possible Solution
●● You cannot use the remote control when you are
The message
“Connecting to Anynet+
configuring Anynet+ or switching to a view mode.
device...” appears on the ●●
Use the remote control when the Anynet+ setting or
screen.
switching to view mode is complete.
The Anynet+ device does ●● You cannot use the play function when Plug & Play
not play.
(initial setup) is in progress.
◀
▶
English
Problem
Possible Solution
The connected device is ●● Check whether or not the device supports Anynet+
not displayed.
functions.
●● Check whether or not the HDMI cable is properly
connected.
●● Check whether Anynet+ (HDMI-CEC) is set to On in
the System menu.
◀
●● Search Anynet+ devices again.
●● You can connect an Anynet+ device using the HDMI
cable only. Some HDMI cables may not support
Anynet+ functions.
●● If it is terminated by an abnormal situation such as
disconnecting the HDMI cable or power cord or a
power failure, please repeat the device scan.
English
▶
Problem
The TV sound is not
output through the
receiver.
Possible Solution
●● Connect the optical cable between TV and the receiver.
◀
▶
English
❑❑ About AllShare™
for LCD 550 series and above
AllShare™ connects your TV and compatible Samsung mobile phones / devices
through a network. In addition, you can play media contents including videos,
photos and music saved on your mobile phones or the other devices (such as
your PC) by controlling them on the TV via the network.
NN For more information, visit “www.samsung.com” or contact the Samsung call
centre. Mobile devices may need additional software installation. For details,
refer to each device’s user’s guide.
◀
▶
English
❑❑ Setting Up AllShare™
OO MENUm → Network → AllShare Settings → ENTERE
■■ AllShare Settings
AllShare Settings
●● Media (On / Off): Enables or disables
◀
the media function. When the media
function is on, Media contents play
can be controlled by mobile phones
or other devices that support DLNA
DMC.
Media
:
►
▶
U Move
English
On
E Enter
R Return
■■ Media
Shows a list of mobile phones or connected devices which have been set up with
this TV for using the Media function.
NN The Media function is available in all devices which support DLNA DMC.
●● Allow / Deny: Allows/Blocks the devices.
B
D Deletes the devices from the list.
●C● A Delete:
NN This function only deletes the name of the devices from the list. If the
◀
deleted device is turned on or tries to connect to the TV, it may appear
on the list again.
English
▶
Using the Media Function
You can play media contents including videos, photos and music saved on your
mobile phones or the other devices (such as your PC) by controlling them on the TV
via the network.
●● To turn off the media contents transmission from the devices, set Media to
Off in the AllShare Settings.
●● Contents may not be played on your TV depending on their resolution and
format.
◀
●● The ENTERE and ◄ / ► buttons may not work depending on the type of
media content.
●● Using the devices, you can control the media playing. For details, refer to each
device’s user’s guide.
English
▶
❑❑ Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the service.
For Teletext information to be displayed correctly, channel reception must be stable.
Otherwise, information may be missing or some pages may not be displayed.
You can change Teletext pages by pressing the numeric buttons on the remote
control.
●● 0 (mode): Selects the Teletext mode (LIST/FLOF). If pressed during LIST
◀
mode, switches the mode to List save mode. In List save mode, you can save
a Teletext page into a list using the 8(store) button.
●● / (Teletext on/mix/off): Activates the Teletext mode for the current
channel. Press the button twice to overlap the Teletext mode with the current
broadcasting screen. Press it one more time to exit teletext.
English
▶
●● 1 (sub-page): Displays the available sub-page.
●● 8 (store): Stores the Teletext pages.
●● 6 (index): Displays the index (contents) page at any time while you are
viewing Teletext.
●● 4 (size): Displays the teletext on the upper half of the screen in double-size.
To move the text to the lower half of the screen, press it again. For normal
display, press it once again.
●● 9 (hold): Holds the display at the current page, in the case that there are
◀
several secondary pages that follow automaticially. To undo, press it again.
●● 2 (page up): Displays the next Teletext page.
●● 3 (page down): Displays the previous Teletext page.
English
▶
●● 5 (reveal): Displays the hidden text (answers to quiz games, for example). To
display the normal screen, press it again.
●● 7 (cancel): Shrinks the Teletext display to overlap with the current broadcast.
●● Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by
the broadcasting company, the different topics on a Teletext page are colourcoded and can be selected by pressing the coloured buttons. Press the
colour corresponding to the topic of your choice. A new colourcoded page is
displayed. Items can be selected in the same way. To display the previous or
next page, press the corresponding coloured button.
◀
▶
English
The Teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
◀
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information. FASTEXT information.
A
B
C
D
E
F
English
▶
❑❑ Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically
fix the system when using it in a public place. The appearance and locking
method may differ from the illustration depending on the manufacturer. Refer
to the manual provided with the Kensington Lock for additional information on
proper use.
NN Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K”
icon.
◀
NN The position and color may
▶
differ depending on the model.
1
TV Rear
Optional
English
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as
desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of
the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product 1.
4. Lock the lock.
◀
NN NOTE
●● These are general instructions. For exact instructions, see the User
manual supplied with the locking device.
●● The locking device has to be purchased separately.
●● The location of the Kensington slot may be different depending on the TV
model.
English
▶
❑❑ Connections Common Interface Slot
To watch paid channels, the “CI or CI+ CARD” must
be inserted.
●● If you do not insert the “CI or CI+ CARD,” some
channels will display the message “Scrambled
Signal”.
●● The pairing information containing a telephone
◀
* It may differ depending on the model.
number, the “CI or CI+ CARD” ID, the Host ID
and other information will be displayed in about 2~3 minutes. If an error message
is displayed, please contact your service provider.
●● When the configuration of channel information has finished, the message “Updating
Completed” is displayed, indicating the channel list is updated.
English
▶
NN NOTE
●● You must obtain a “CI or CI+ CARD” from a local cable service provider.
●● When removing the “CI or CI+ CARD”, carefully pull it out with your hands
since dropping the “CI or CI+ CARD” may cause damage to it.
●● Insert the “CI or CI+ CARD” in the direction marked on the card.
●● The location of the COMMON INTERFACE slot may be different depending on
the model.
●● “CI or CI+ CARD” is not supported in some countries and regions; check with
◀
your authorized dealer.
●● If you have any problems, please contact a service provider.
●● Insert the “CI or CI+ CARD” that supports the current antenna settings. The
screen will be distorted or will not be seen.
English
▶
❑❑ Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these
troubleshooting tips apply, please visit “www.samsung.com”, then click on
Support.
◀
Issues
Solutions and Explanations
Picture Quality
First of all, please perform the Picture Test and confirm that
your TV is properly displaying test image. (go to MENU Support - Self Diagnosis - Picture Test) If the test image
is properly displayed, the poor picture may caused by the
source or signal.
English
▶
Issues
Solutions and Explanations
The TV image does
not look as good as it
did in the store.
●● If you have an analogue cable/set top box, upgrade to a
digital set top box. Use HDMI or Component cables to
deliver HD (high definition) picture quality.
●● Cable/Satellite subscribers: Try HD stations from the
channel line up.
●● Antenna connection: Try HD stations after performing
◀
Auto tuning.
NN Many HD channels are up scaled from
SD(Standard Definition) contents.
●● Adjust the Cable/Set top box video output resolution to
1080i or 720p.
●● Make sure you are watching the TV at the minimum
recommended distance based on the size and definition
of the signal.
English
▶
Issues
Solutions and Explanations
The picture is
distorted: macroblock
error, small block,
dots, pixelization
●● Compression of video contents may cause picture
distortion especially in fast moving pictures such as
sports and action movies.
●● Low signal level or bad quality can cause picture
distortion. This is not a TV issue.
●● Mobile phones used close to the TV (cca up to 1m) may
◀ Colour is wrong or
missing.
cause noise in picture on analog and digital TV.
●● If you’re using a component connection, make sure
the component cables are connected to the correct
jacks. Incorrect or loose connections may cause colour
problems or a blank screen.
English
▶
Issues
Solutions and Explanations
There is poor colour
or brightness.
●● Adjust the Picture options in the TV menu. (go to Picture
Mode / Colour / Brightness / Sharpness)
●● Adjust Energy Saving option in the TV menu. (go to
MENU - System - ECO solution - Energy Saving)
●● Try resetting the picture to view the default picture
settings. (go to MENU - Picture - Reset Picture)
◀
There is a dotted line
on the edge of the
screen.
●● If the picture size is set to Screen Fit, change it to 16:9.
The picture is black
and white.
If you are using an AV composite input, connect the video
cable (yellow) to the Green jack of component input 1 on
the TV.
●● Change cable/satellite box resolution.
English
▶
Issues
Solutions and Explanations
When changing
channels, the picture
freezes or is distorted
or delayed.
●● If connected with a cable box, please try to reset the
cable box. Reconnect the AC cord and wait until the
cable box reboots. It may take up to 20 minutes.
●● Set the output resolution of the cable box to 1080i or
720p.
Sound Quality
◀
First of all, please perform the Sound Test to confirm
that your TV audio is properly operating. (go to MENU Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may caused by the
source or signal.
There is no sound or
the sound is too low
at maximum volume.
●● Please check the volume of the device (Cable/Sat Box,
DVD, Blu-ray etc) connected to your TV.
English
▶
Issues
Solutions and Explanations
The picture is good
but there is no sound.
●● Set the Speaker Select option to TV Speaker in the
sound menu.
●● If you are using an external device, make sure the audio
cables are connected to the correct audio input jacks on
the TV.
●● If you are using an external device, check the device’s
◀
audio output option (ex. you may need to change your
cable box’s audio option to HDMI when you have a
HDMI connected to your TV).
●● If you are using a DVI to HDMI cable, a separate audio
cable is required.
●● Reboot the connected device by reconnecting the
device’s power cable.
●● If your TV has a headphone jack, make sure there is
nothing plugged into it.
English
▶
Issues
Solutions and Explanations
The speakers
are making an
inappropriate noise.
●● Check the cable connections. Make sure a video cable
is not connected to an audio input.
●● For antenna or cable connections, check the signal
strength. Low signal level may cause sound distortion.
No Picture, No Video
◀
The TV will not turn
on.
●● Make sure the AC power cord is securely plugged in to
the wall outlet and the TV.
●● Make sure the wall outlet is working.
●● Try pressing the POWER button on the TV to make sure
the problem is not the remote. If the TV turns on, refer to
“The remote control does not work” below.
English
▶
Issues
Solutions and Explanations
The TV turns off
automatically.
●● Ensure the Sleep Timer is set to Off in the System
menu.
●● If your PC is connected to the TV, check your PC power
settings.
●● Make sure the AC power cord is plugged in securely to
the wall outlet and the TV.
◀
●● When watching TV from an antenna or cable connection,
the TV will turn off after 10 ~ 15 minutes if there is no
signal.
English
▶
Issues
Solutions and Explanations
There is no picture/
video.
●● Check cable connections (remove and reconnect all
cables connected to the TV and external devices).
●● Set your external devices’ (Cable/Set top Box, DVD,
Blu-ray etc) video outputs to match the connections to
the TV input. For example, if an external device’s output
is HDMI, it should be connected to an HDMI input on
the TV.
◀
●● Make sure your connected devices are powered on.
●● Be sure to select the TV’s correct source by pressing the
SOURCE button on the TV remote.
●● Reboot the connected device by reconnecting the
device’s power cable.
English
▶
Issues
Solutions and Explanations
RF(Cable/Antenna) Connection
The TV is not receiving ●● Make sure the Antenna cable is connected securely.
all channels.
●● Please try Plug & Play (Initial setup) to add available
channels to the channel list. Go to MENU - System
- Plug & Play (Initial setup) and wait for all available
channels to be stored.
◀
●● Verify the Antenna is positioned correctly.
●● Compression of video contents may cause picture
The picture is
distorted: macro block
distortion. especially on fast moving pictures such as
error small block,
sports and action movies.
dots, pixelization
●● A low signal can cause picture distortion. This is not a
TV issue.
English
▶
Issues
Solutions and Explanations
PC Connection
◀
A “Mode Not
Supported” message
appears.
●● Set your PC’s output resolution so it matches the
“PC” is always shown
on the source list,
even if a PC is not
connected.
●● This is normal; “PC” is always shown on the source list,
The video is OK but
there is no audio.
●● If you are using a HDMI connection, check the audio
resolutions supported by the TV.
regardless of whether a PC is connected.
output setting on your PC.
English
▶
Issues
Network Connection
The wireless network
connection failed.
Solutions and Explanations
for LCD 550 series and above
●● Samsung Wireless USB dongle is required to use a
wireless network.
●● Make sure the Network Connection is set to Wireless.
●● Make sure the TV is connected to a wireless IP sharer
(Router).
◀ Software Upgrade
over the network fails.
●● Try Network Settings in Network menu.
●● If you have latest SW version, SW upgrade will not
proceed.
English
▶
Issues
Solutions and Explanations
Others
The picture will not
display in full screen.
●● HD channels will have black bars on either side of the
screen when displaying up scaled SD (4:3) contents.
●● Black bars on the top and bottom will appear during
movies that have aspect ratios different from your TV.
●● Adjust the picture size options on your external device or
◀
TV to full screen.
The remote control
does not work.
●● Replace the remote control batteries with the poles (+/–)
in the right direction.
●● Clean the sensor’s transmission window on the remote.
●● Try pointing the remote directly at the TV from 5~6 feet
away.
English
▶
Issues
Solutions and Explanations
The cable/set top box ●● Programme the Cable/Set top box remote control to
remote control doesn’t
operate the TV. Refer to the Cable/Set user manual for
turn the TV on or off,
the SAMSUNG TV code.
or adjust the volume.
A “Mode Not
Supported” message
appears.
●● Check the supported resolution of the TV, and adjust the
external device’s output resolution accordingly.
◀ There is a plastic smell ●● This smell is normal and will dissipate over time.
from the TV.
●● This function is only available with digital channels from
The TV Signal
Information is
an Antenna / RF / Coax connection.
unavailable in the Self
Diagnosis Test menu.
English
▶
Issues
Solutions and Explanations
TV is tilted to the right
or left side.
●● Remove the stand base from the TV and reassemble it.
There are difficulties
assembling the stand
base.
●● Make sure the TV is placed on a flat surface. If you
The Channel menu is
grey out (unavailable).
●● The Channel menu is only available when the TV source
◀ Your settings are lost
after 30 minutes or
every time the TV is
turned off.
can not remove the screws from the TV, please use a
magnetized screw driver.
is selected.
●● If the TV is in the Store Demo mode, it will reset audio
and picture settings every 30 minutes. Change the
settings from Store Demo mode to Home Use mode
in the Plug & Play (Initial setup) procedure. Press the
SOURCE button to select TV mode, and go to MENU
→ System → Plug & Play (Initial setup) → ENTERE.
English
▶
Issues
Solutions and Explanations
You have intermittent
loss of audio or video.
●● Check the cable connections and reconnect them.
●● Loss of audio or video can be caused by using overly
rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall,
we recommend using cables with 90 degree connectors.
◀
You see small particles ●● This is part of the product’s design and is not a defect.
when you look closely
at the edge of the
frame of the TV.
The PIP menu is not
available.
●● PIP functionality is only available when you are using a
HDMI, PC or components source.
English
▶
Issues
Solutions and Explanations
You turned the TV off ●● It is normal. The TV operates the OTA (Over The Aerial)
45 minutes ago, and it
function itself to upgrade firmware downloaded whilst
turned on again.
your watching TV.
The message
“Scramble signal”
or “Weak Signal/No
Signal” appears.
◀ There are recurrent
●● If you are using a CAM CARD (CI/CI+), check that it is
installed into the common interface slot.
●● If there is still a problem, pull the CAM CARD out of the
TV and insert it into the slot again.
●● Check and change the signal/source.
picture/sound issues.
A reaction may occur
between the rubber
cushion pads on the
base stand and the
top finish of some
furniture.
●● To prevent this, use felt pads on any surface of the TV
that comes in direct contact with furniture.
English
▶
❑❑ Licence
Manufactured under licence from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
◀
Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued
& pending. DTS and the Symbol are registered trademarks. & DTS 2.0+
Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes
software. © DTS, Inc. All Rights Reserved.
English
▶
DivX Certified to play DivX video up to HD 1080p, including premium content.
◀
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official
DivX Certified device that plays DivX video. Visit www.divx.com for more information and
software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD)
content. To generate the registration code, locate the DivX VOD section in the device setup
menu. Go to vod.divx.com with this code to complete the registration process and learn
more about DivX VOD. Pat. 7,295,673;7,460,688; 7,519,274
English
▶
TheaterSound, SRS and
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under licence from SRS Labs, Inc.
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the
product menu. Open Source Licence Notice is written only English.
◀
English
Download PDF

advertising