B
C
E
B
C
E
A
A
D
Figure/Imagen 1
Figure/Imagen 2 Figure/Imagen 3
CDO-006 ACDL133
D
Figure/Imagen 1
Figure/Imagen 2 Figure/Imagen 3
CDO-006 ACDL133
OttLite LED Flip Light
Lampe pliable à DEL OttLite
Lámpara con convertor OttLite LED
49039C 49080C 49021C 490009 490G59 49000C 459PN9
490WBC 49008C 49090C 471CMC 471KTC 471TUC 47147C
ENGLISH
CONGRATULATIONS!
You’ve purchased the finest in natural lighting technology with your new OttLite ® product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product
Registration Form and return it today by mail, or register online by going to:
OttLite.com/warranty.
1. Remove product from the package.
2. Install three (3) AAA batteries (not included) per BATTERY INSTALLATION/REPLACEMENT section.
3. To turn the light ON, flip open cover (A). This will release switch (B) and turn the light on automatically.
4. To turn the light OFF, close the cover (A) until it is secured in place and switch (B) is pushed down.
5. To attach to a belt or strap, hold open clip
(E) and slide the light over the belt or strap.
BATTERY INSTALLATION/
REPLACEMENT
Your OttLite ® LED Flip Light is powered by 3 AAA batteries. Batteries are not included.
Warning: Keep away from children. If swallowed, promptly see doctor. Do not install backwards, charge, put in fire or mix with other battery types – may explode or leak causing injury.
1. To install batteries, make sure cover (A) is closed and the light is facing down.
2. Open the battery compartment cover (C) by sliding it away from the bottom of the light (Figure 1), then swing the cover open
(Figure 2).
3. Using a clean dry cloth, wipe the battery contacts and also the contacts on the inside of the battery compartment.
4. Install the 3 AAA batteries as indicated by the graphic inside the battery compartment.
5. Swing battery cover (C) down then push it toward the bottom of the light to engage tabs (D) (Figure 3) and fully close.
6. Test battery installation by briefly turning on the light.
Notice: Only replace batteries as a simultaneous set and do not mix with older batteries. Remove batteries if consumed or if the light has not been in use for a long period of time.
Enjoy your OttLite ® LED Flip Light!
INS150169 REV050415
OttLite LED Flip Light
Lampe pliable à DEL OttLite
Lámpara con convertor OttLite LED
49039C 49080C 49021C 490009 490G59 49000C 459PN9
490WBC 49008C 49090C 471CMC 471KTC 471TUC 47147C
ENGLISH
CONGRATULATIONS!
You’ve purchased the finest in natural lighting technology with your new OttLite ® product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product
Registration Form and return it today by mail, or register online by going to:
OttLite.com/warranty.
1. Remove product from the package.
2. Install three (3) AAA batteries (not included) per BATTERY INSTALLATION/REPLACEMENT section.
3. To turn the light ON, flip open cover (A). This will release switch (B) and turn the light on automatically.
4. To turn the light OFF, close the cover (A) until it is secured in place and switch (B) is pushed down.
5. To attach to a belt or strap, hold open clip
(E) and slide the light over the belt or strap.
BATTERY INSTALLATION/
REPLACEMENT
Your OttLite ® LED Flip Light is powered by 3 AAA batteries. Batteries are not included.
Warning: Keep away from children. If swallowed, promptly see doctor. Do not install backwards, charge, put in fire or mix with other battery types – may explode or leak causing injury.
1. To install batteries, make sure cover (A) is closed and the light is facing down.
2. Open the battery compartment cover (C) by sliding it away from the bottom of the light (Figure 1), then swing the cover open
(Figure 2).
3. Using a clean dry cloth, wipe the battery contacts and also the contacts on the inside of the battery compartment.
4. Install the 3 AAA batteries as indicated by the graphic inside the battery compartment.
5. Swing battery cover (C) down then push it toward the bottom of the light to engage tabs (D) (Figure 3) and fully close.
6. Test battery installation by briefly turning on the light.
Notice: Only replace batteries as a simultaneous set and do not mix with older batteries. Remove batteries if consumed or if the light has not been in use for a long period of time.
Enjoy your OttLite ® LED Flip Light!
INS150169 REV050415
