Maverick High Frequency Chargers

Maverick High Frequency Chargers
Maverick™MultiPro™
Multi Volt, Multi Amp Opportunity Charger
Maverick MultiPro Multi Volt, Multi Amp Opportunity Charger using Insulated
Gate Bipolar Transistors (IGBT), returns more energy at a lower cost than low
frequency opportunity chargers. It has a very high power factor and is one of
the most efficient chargers available, resulting in the lowest operating cost.
Additionally, the MultiPro automatically determines battery voltage and
adjusts its output accordingly and has lower battery heating due to a very low
ripple current.
These features combined with a full two-year warranty, make the Maverick
line of High Frequency Chargers the absolute best value in the marketplace.
MAVERICK ™ CHARGERS
Go green with Maverick high frequency, and high efficiency
battery chargers. The Mavericks minimize the amount of power drawn, giving users
of electric utility vehicles real cost savings, reduced CO2 emissions and additional
power capacity. All of the Maverick products are designed to provide excellent
re-charging with the minimal consumption of energy.
Features & Benefits
Delayed start from fifteen minutes to four hours in fifteen minute intervals
Equalize can be done manually, automatically with daytime setting, or every five cycles
Automatic refresh charge every 24 hours
Programmable charge block out time (peak demand electrical cost control)
Remote Control Interface for use when mounted above arms reach
Auto start with five second delay
Selectable start rate of 18 or 25 Amp per 100 Amp Hour
Cool down time displayed
CHARGERS
Programmable voltage and amp hour capability
Quickly determines battery voltage without any peripheral devices
(AES proprietary battery integration algorithm)
Automatic Shutdown for the following:
•80% or final charge exceeds time limit
•Volts per cell outside safe limits
•Charging current too high or too low
Digital Readout Display:
•Time remaining to 80% charge
•Charge current/voltage
•Equalize in process
•Fault codes
LED Charge Status Indicators:
•Gas gauge
•Charging
•80% charged
•Maximum battery temperature
exceeded with optional sensor
•Charger internal temperature outside
of specification
•Charge data twenty five cycles
(time, AH returned and Voltage)
•Charger setup
•Charge complete
•Equalize
•Fault shutdown
Options
19 in.
MAVERICK
HIGH FREQUENCY
OPPORTUNITY CHARGER
MAVERICK
CONVENTIONAL
CHARGER
MAVERICK
HIGH FREQUENCY
MULTI AMP MULTI-PRO™
•Battery electrolyte temperature sensor •Custom output cable lengths
up to 20 ft max
•Wall mount
•Remote control box
•Weight: Approx.150 lbs.
•Stackable with no brackets required
(depending on model size)
Product Safety
22in.
22 in.
• UL Listed
• AC Specifications three phase 480 VAC
•UL Listed to Canadian Safety Standards
Warranty Details
See warranty certificate. CAUTION: disconnecting the battery from the charger
during the charge cycle without manually stopping the charger can cause
damage to both operator and equipment and void the warranty.
THE POWER OF EXCELLENCE
THE POWER OF EXCELLENCE
Tel: 585-538-4421
800-836-2132
Fax: 585-538-6345
One Technology Place
Caledonia, New York 14423
www.AppliedEnergySol.com
Tel: 585-538-4421
800-836-2132
Fax: 585-538-6345
One Technology Place
Caledonia, New York 14423
www.AppliedEnergySol.com
Maverick™High Frequency
Conventional Charger
Maverick™High Frequency
Opportunity Charger
The Maverick High Frequency Conventional Charger, using Insulated Gate
Bipolar Transistors (IGBT), returns more energy at a lower cost than low
frequency conventional chargers.
These features, combined with a full two-year warranty, make the
Maverick line of high frequency chargers the absolute best value in
the market.
The Maverick High Frequency Opportunity Charger, using Insulated Gate
Bipolar Transistor (IGBT), returns more energy at a lower cost than low
frequency opportunity chargers. It has a very high power factor and is the
most efficient charger available, resulting in the lowest operating cost.
Additionally, its design allows for lower battery heating due to a very low
ripple current.
These features combined with a full two-year warranty, make the
Maverick line of High Frequency Chargers the absolute best value in
the marketplace.
Features & Benefits
Features & Benefits
Delayed start from fifteen minutes to two hours in fifteen minute intervals
No battery modifications are required
Equalize can be done manually every five cycles
Includes the TCC 2.0 Controller:
•Delayed start form fifteen minutes to
four hours in fifteen minute intervals
•Equalize can be done manually,
automatically with day/time setting, or
every five cycles
•Automatic refresh charge every
24 hours
•Programmable charge block out time
(peak demand electrical cost control)
It has a high power factor and is one of the most efficient chargers
available, resulting in the lowest operating cost. Additionally, its design
allows for lower battery heating due to a very low ripple current.
Automatic refresh charge every 12 hours
Remote Control Interface for use when mounted above arms reach
Auto start with five second delay
Automatic Shutdown for the following:
•80% or final charge exceeds
•Charging current too low
time limit
•Charger internal temperature outside
•Volts per cell outside safe limits
of specification
Digital Readout Display:
•Charge current/voltage
•Equalize in process
LED Charge Status Indicators:
•Gas gauge
•Charging
•80% charged
Cool down time displayed
•Fault codes
Manual jump start for over-discharged batteries
•Charge complete
•Equalize
•Fault shutdown
Automatic Shutdown for the following:
•80% or final charge exceeds
time limit
•Volts per cell outside safe limits
•Charging current too high or too low
•Maximum battery temperature
exceeded with optional sensor
•Charger internal temperature
outside of specification
Digital Readout Display:
•Time remaining to 80% and
full charge
•Charge current/voltage
•Equalize in process
•Fault codes
•Charge data twenty five cycles
(time, AH returned and voltage)
•Charger setup
LED Charge Status Indicators:
•Gas gauge
•Charging
•80% charged
•Charge complete
•Equalize
•Fault shutdown
Options
•Wall mount
•Remote control box
•Stackable with no brackets required
•Custom output cable lengths
up to 20 ft max
•Weight: Approx.150 lbs.
(depending on model size)
Product Safety
•UL Listed
•AC Specifications three phase
480 VAC
17 in.
•UL Listed to Canadian Safety
Standards
Options
19 in.
•Battery electrolyte temperature sensor •Custom output cable lengths
•Wall mount
up to 20 ft max
•Remote control box
•Weight: Approx.150 lbs.
•Stackable with no brackets required
(depending on model size)
Warranty Details
22in.
22 in.
•Programmable charge termination
when battery voltage reaches the
gassing point, to prevent excessive
gassing
•Remote Control Interface for use
when mounted above arms reach
•Auto start with five second delay
•Selectable start rate of 18 or 25
Amp per 100 Amp Hour
See warranty certificate. CAUTION: disconnecting the battery from the charger
during the charge cycle without manually stopping the charger can cause
damage to both operator and equipment and void the warranty.
22in.
22 in.
Product Safety
• UL Listed
• AC Specifications three phase 480 VAC
•UL Listed to Canadian Safety
Standards
Warranty Details
See warranty certificate. CAUTION: disconnecting the battery from the charger
during the charge cycle without manually stopping the charger can cause
damage to both operator and equipment and void the warranty.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising