Tripp Lite | SM5000RT3UTAA | Datasheet | Tripp Lite SM5000RT3UTAA uninterruptible power supply (UPS)

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SM5000RT3UTAA
TAA Compliant SmartPro 5kVA Line Interactive Sine Wave UPS, Extended-run & SNMPWEBCARD options, 6U
Rack/Tower, USB, Serial, EPO, 208+120V
Highlights
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule
purchases
5000VA / 5kVA line interactive, extended-run 6U rack / tower UPS (3U Power
Module + 3U Battery Pack)
Maintains sine-wave 208V and simultaneous 120V nominal output during
brownouts to 151 and overvoltages to 260V
Network communications supported via 2 USB ports, 2 serial ports,
SNMP/Web card slot and EPO interface
Current monitoring and switched PDU control via 8 single-outlet load banks
Input: L6-30P (208V 30A) / Output: 1 L6-30R (208V), 1 L14-30R (208/120V
split phase), 2 NEMA 5-20R (120V), 10 NEMA 5-15R (120V)
2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA, Puerto
Rico & Canada only)
Description
Tripp Lite's line-interactive SM5000RT3UTAA UPS System is compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
This UPS protects server, networking or telecommunications equipment from blackouts, voltage fluctuations and surges in a compact
tower/rackmount housing. In rack configuration, the power module and battery pack occupy only 3 rack spaces (3U) each. Large capacity
5000VA/4000W power module converts raw 208V AC input to fully regulated dual output 208/120 voltage for simultaneous protection of both highand low-voltage equipment loads. True sine wave output at all times offers guaranteed compatibility with all equipment types. Includes 14 outlets, 8
of which can be individually reset via software interface to selectively reboot remote equipment or shed less critical loads to extend battery runtime
for more critical equipment. Battery support can be extended indefinitely with additional external 3U rackmount battery packs. Includes slot for
internal SNMP/web card, plus two DB9 and two USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS
system and power data.
Package Includes
SM5000RT3UTAA UPS System
BP48V60RT3U battery pack
PowerAlert Software and cabling
Mounting hardware
Instruction manual with warranty information
Features
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Large 5000VA/4000W output capacity with full-time sine wave output offers guaranteed compatibility with all equipment types
High power density 5kVA power module and battery pack occupy only 3 rack spaces (3U) each (UPS and battery pack require 6U total
installed)
38 min. half load runtime, expandable with multiple external battery packs (part# BP48V60RT3U)
Line-interactive voltage regulation corrects severe brownouts and overvoltages without using battery power
Line-interactive voltage regulation corrects severe brownouts and overvoltages without using battery power
Dual voltage output is simultaneously compatible with both 208V and 120V equipment
14 total outlets (120V: 10 x 5-15R, 2 x 5-20R/208V: 1 x L6-30R, 1 x L14-30R)
Diagnostic LEDs provide visual indication of 17 separate performance conditions
Included PowerAlert Software provides e-mail notification of power problems and simultaneous automatic unattended shutdown of multiple
servers
4 built-in communications ports (2 x DB9, 2 x USB) for remote monitoring and unattended shutdown
Slot for SNMP/web card SNMPWEBCARD and environmental sensor ENVIROSENSE for remote communications in large IP environments
8 customized load management receptacles can be individually powered off and back on again via software interface to reboot remote
equipment or perform "load shedding" of less critical loads to extend battery runtime for the most critical equipment
Emergency Power Off (EPO) interface for emergency shutoff in large facilities
Hot-swappable/user replaceable batteries allow on-site battery replacement through the front panel without powering off connected
equipment or removing the UPS from the rack
UPS battery set ships fully assembled and ready for connection to the power module, no time consuming, connection of individual internal
batteries by user is necessary
$250,000 Ultimate Lifetime Insurance (USA & Canada Only). No warranty cards required for coverage!
NAFTA compliant
2-year manufacturer's product warranty
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
5000
Output kVA capacity
(kVA)
5
Output Watt Capacity
(watts)
4000
Output kW capacity
4
Output power factor
0.8
Nominal Output
Voltage(s) Supported
120V; 208V
Frequency
compatibility
60 Hz
Output voltage
regulation (line mode)
208 & 120V (-10%, +20%)
Output voltage
regulation (Battery
mode)
+/- 5%
Built-in UPS output
receptacles
10 5-15R outlet(s); 2 5-15/20R outlet(s); 1 L14-30R outlet(s); 1 L6-30R outlet(s)
Built-in controllable
switched load banks
Eight switchable single-outlet 5-15R load banks
Output circuit breaker
15A branch rated (x3) - 2 breakers support 5 5-15R outlets each, one breaker supports 2 5-20R outlets, L6-30R
and L14-30R outlets are unbreakered
Basic PDU options
PDU1220 (1U / 13 5-15/20R outlets); PDU1230 (1U / 2 C19, 16 C13 outlets); PDUV20 (0U / 12 5-15/20R outlets);
PDU40TDUAL (0U / 40 5-15/20R outlets); PDUV30HV (0U / 6 C19, 32 C13 outlets)
Metered PDU options
PDUMH20 (1U / 13 5-15/20R outlets); PDUMH20AT (1U / 16 5-15/20R outlets)*; PDUMV20 (0U / 16 5-15/20R
outlets); PDUMV40 (0U / 32 5-15/20R outlets); PDUMV30HV (0U / 6 C19, 24 C13 outlets)
Switched PDU options
PDUMH20ATNET (1U / 16 5-15/20R outlets)*; PDUMH30HVNET (2U / 16 C13 outlets); PDUMV20NET (0U / 24
5-15/20R outlets); PDUMV30HVNET (0U / 4 C19, 24 C13 outlets)
External PDU
redundancy options
*Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS
models only
Output AC waveform
(AC mode)
Sine wave
INPUT
Nominal Input
Voltage(s) Supported
208V AC
UPS input connection
type
L6-30P
Input circuit breaker
30A double-pole
UPS Input cord length
(ft.)
10
UPS Input cord length
(m)
3
Recommended
Electrical Service
30A 208V
Input cord length (ft.)
10
Input cord length (m)
3
BATTERY
Full load runtime
(minutes)
16 min. (4000w)
Half load runtime
(minutes)
38 min. (2000w)
Expandable battery
runtime
Extended runtime supported via optional external battery packs
External battery pack
compatibility
BP48V60RT-3U (multi-pack compatible)
DC system voltage
(VDC)
48
Battery recharge rate
(included batteries)
Less than 4 hours from 10% to 90%
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 282
Overvoltage correction
Input voltages between 240V and 282 are reduced by 12%
Undervoltage
correction
Input voltages between 180V and 199 are boosted by 12%
Severe undervoltage
correction
Input voltages between 151V and 179 are boosted by 24%
LEDS ALARMS & SWITCHES
LED Indicators
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms
Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
1020
UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form
factors supported with
included accessories
4 post 19 inch rackmount (mounting rail kit included)
Installation form
factors supported with
optional accessories
2 post rackmount (2POSTRMKITWM); Tower (2-9USTAND)
Optional mounting
accessory notes
2 sets of 2POSTRMKITWM required for 2 post rackmount installation of separate power module and battery pack
Primary form factor
Rackmount
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)
5.2 x 17.5 x 22.5
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)
13.3 x 44.4 x 57.2
Installed whole system
maximum rack depth
(inches)
22.8
Installed whole system
maximum rack depth
(cm)
57.8
Installed whole system
total rack space height
(rack spaces)
6U
Secondary form factor
Tower (requires 2-9USTAND)
UPS / Power Module
weight (kg)
0
UPS dimensions details
Includes 3U power module and 3U external battery pack
Included battery pack
dimensions (height x
width x depth / inches)
5.2 x 17.5 x 22.8
Included battery pack
dimensions (height x
width x depth / cm)
13.3 x 44.4 x 57.8
Included battery pack
weight (lbs)
135
Included battery pack
weight (kg)
61.3
UPS Shipping
dimensions (height x
width x depth / cm)
22.8 x 23 x 31.5
Shipping weight (lbs)
320
Shipping weight (kg)
145.3
UPS housing material
Steel
Cooling method
Fans
ENVIRONMENTAL
Operating Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature
Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity
0 to 95%, non-condensing
AC mode BTU / hr. (full
load)
868.1
Battery mode BTU / hr.
(full load)
1511.1
COMMUNICATIONS
Communications
interface
USB; DB9 Serial; Contact closure
Network monitoring
port description
Supports detailed monitoring of UPS and site power conditions; 2 USB ports, 1 DB9 serial and 1 DB9 contact
closure port (4 total)
PowerAlert software
Included
Communications cable
USB and DB9 cabling included
WatchDog compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time
2-4 milliseconds
Low voltage transfer to
battery power (setpoint)
151
High voltage transfer
to battery power
(setpoint)
282
SPECIAL FEATURES
Grounding lug
Back panel grounding lug
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Hot swappable batteries
Green & high efficiency
features
Individually controllable load banks
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A
(EMI); TAA Compliant
WARRANTY
Product Warranty
Period (U.S., Canada &
Puerto Rico)
2-year limited warranty
Connected Equipment
Insurance (U.S.,
Canada & Puerto Rico)
$250,000 Ultimate Lifetime Insurance
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=4852.
Copyright © 2011 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Download PDF

advertising