S122 - 2" Define DIP_RDIP - Direct Indirect

S122 - 2" Define DIP_RDIP - Direct Indirect
Neo-Ray
DESCRIPTION
The Define series by Neo-Ray characterizes the ultimate in minimalist
simplicity by providing clean, uniform lines of illumination in virtually any
architectural environment. Powered by Eaton’s most advanced linear LED
technology, the Define series delivers outstanding efficacy in a variety of
profile widths. 2”, 3”, 4” and 5” luminaire widths are all specifiable to the
nearest foot as standard product and can be fitted with flush, regress and
drop lensing. Custom corners and transitions are also available. Robust
construction and adaptable, modular components make installation simple
and ensure laser straight runs.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
Construction
Electrical
Housing extruded from 6063
aluminum. Nominal 2’ -12’
illuminated sections. Used in run
configuration and/or individual
fixtures. All components are
RoHs compliant.
Long-life LED system coupled
with electrical driver to deliver
optimal performance. LED’s are
available in 2700K, 3000K, 3500K
or 4000K with a typical CRI ≤ 85.
Projected life is 153,000 hours at
>79% lumen output. Electronic
drivers are available for 120277V applications. Fixtures and
electrical components certified to
UL and CUL standards. Fixtures
are damp location listed.
Lens
Snap in lens available in flush
and drop lens profiles. Snap
in end clips eliminate light leak
and prevent moisture and insect
ingress.
Controls
Finish
Fixture housings are high
reflectance white using
electrostatically applied polyester
powder coat paint.
Equipped standard with a 0-10V
continuous dimming driver
compatible with most standard
dimming devices (refer to
website for specific compatibility
reference).
Combine with FifthLight DALI and
other energy saving products like
sensors, daylighting controls and
building management systems to
maximize energy savings.
Mounting
Suspended.
Pendant with single aircraft cable and
circular canopy. Standard length of
canopy is 48”.
Warranty
Five year warranty.
Define 2
Pendant
LED
Direct / InDirect
CERTIFICATION DATA
5.13”
130 mm
4.13”
105 mm
cULus - 1598
Damp Location Listed
LM79/LM80 Compliant
RoHS Compliant
Lumawatt Pro Wireless
1.68”
43 mm
1.68”
43 mm
2”
51 mm
2”
51 mm
ORDERING INFORMATION
Sample Number: S122DIP-U1-235-SC48-ETG0048-1D-UDD-1-5-W
LIGHT
DISTRIBUTION
LIGHT LEVEL
UP1
LIGHT LEVEL
DOWN1
COLOR
TEMP
MOUNTING
CABLE LENGTH
DIP = D
irect / Indirect Pendant
RDIP = Regressed Direct / Indirect
-ULO = Light Level ULO
-LO = Light Level LO
-SC48 = 48” (std)
-U1
-1
27 = 2700K
30 = 3000K
35 = 3500K
40 = 4000K
SERIES
S122 = Define 2
Pendant
-U2
CIRCUITING
-1 = Single Circuit
-2 = Dual Circuit
CIRCUIT TYPE
D=
C=
B=
E=
G=
Dimming (std)
Non-Dimming
Battery Pack 8
Emergency
Bodine GTD
437 Lm/Ft*
= Light Level U1
851 Lm/Ft*
= Light Level U2
1225 Lm/Ft*
-2
299 Lm/Ft*
= Light Level 1
582 Lm/Ft*
= Light Level 2
838 Lm/Ft*
See page 2 for lumen output
See page 2 for lumen output
*Tested with no lens up
*Tested with satin lens down
VOLTAGE
LED DRIVER
SHIELDING DOWN
-1 = 120V
-2 = 277V
-U = U
niversal
ED = Non-Dimming
DD = 0-10 V Dimming (std)
HCD = 1% 0-10 V Dimming
5L = DALI Dimming 7
-1 = Satin White Diffuser
-3 = Asymmetric Flush
-4 = Satin Drop Diffuser
120V-277V
-3 = 347V 6
Adjustable Cable
-SC120 = 120”
Adjustable Cable
-SC240 = 240”
Adjustable Cable
SHIELDING UP
-NA = No Lens
(standard)
-5 = Satin White
Diffuser
CEILING TYPE2
LENGTH3
-ETG = 15/16” Flat T-Grid
-FTG = 9/16” Flat T-Grid
-ITG = 9/16” Interlude T-Grid
-STG = 9/16” Slot T-Grid
-JB = Gypsum board
-ST = Structure
0024 = 2’ Individual4
0048 = 4’ Individual
0072 = 6’ Individual
0096 = 8’ Individual
0144 = 12’ Individual
XXXX = Configurable
COLOR
-W = Matte White
-S = Silver
-B = Black
-C = Custom Color
Run5
OPTIONS 9
SVPD1 = Integrated Sensor13
LWIPD1 = Lumawatt Pro Wireless
Integral Sensor13
-90 = 90-CRI (Lower Lumens)
-R = GLR Fast Fusing
-F = GMR Slow Fusing
Notes:
* See page 4 for specific notes.
PS524034EN
2017-02-22
Neo-Ray
Photometric Data - All data certified to LM-79 standards in a NAVLAB approved testing facility
180°
1,213
Filename: S122DIP-U1-135-SC48-SR0048-1D-UDD-1-NA-W
Test Number: P189501
Lumens: 5731.6 Lms
Watts: 52 W
LPW: 110.2 Lm/W
CCT: 3500K
175°
160°
145°
910
130°
606
303
115°
0
90°
ZONAL LUMEN STUDY
75°
60°
LUMINANCE DATA (cd / sq.m
Zone
Lumens
% Fixture
Angle
0-Deg
45-Deg
90-Deg
0-30
684
11.9
45
12336
3863
12226
0-40
1100
19.2
55
11529
2767
11377
0-60
1880
32.8
65
10528
1804
10269
0-90
2330
40.6
75
8830
923
8574
90-180
3402
59.4
85
5807
211
5553
45°
30°
0°
180°
1,746
15°
Filename: S122DIP-U2-235-SC48-SR0048-1D-UDD-1-NA-W
Test Number: P27986
Lumens: 8252 Lms
Watts: 80.3 W
LPW: 102.8 Lm/W
CCT: 3500K
175°
160°
145°
1,310
130°
873
437
115°
0
90°
ZONAL LUMEN STUDY
75°
60°
45°
LUMINANCE DATA (cd / sq.m
Zone
Lumens
% Fixture
Angle
0-Deg
45-Deg
0-30
985
11.9
45
17760
5562
90-Deg
17603
0-40
1583
19.2
55
16600
3983
16380
0-60
2706
32.8
65
15157
2597
14783
0-90
3354
40.6
75
12711
1328
12344
90-180
4898
59.4
85
8348
304
7985
30°
0°
15°
PS524034EN
2017-02-22
Neo-Ray
LIGHT OUTPUT, 3500K, ≤85CRI Typical
Light Level Up: ULO
Light
Level
Down
Light Level Up: U1
Lm
Total
% Dn
% Up
Lm/ft
Down
Lm/ft
Up
Total
Watts
0
2495
40.6%
59.4%
299
437
26.9
1
4076
57.1%
42.9%
582
437
40.1
2
5100
65.7%
34.3%
838
437
55.2
Lm
Total
Light
Level
Down
Light Level Up: U2
% Dn
% Up
Lm/ft
Down
Lm/ft
Up
Total
Watts
0
4600
26.0%
74.0%
299
851
38.8
1
5732
40.6%
59.4%
582
851
52.0
2
6755
49.6%
50.4%
838
851
67.0
Lm
Total
Light
Level
Down
% Dn
% Up
Lm/ft
Down
Lm/ft
Up
Total
Watts
52.2
0
6097
19.6% 80.4%
299
1225
1
7229
32.2% 67.8%
582
1225
65.5
2
8252
40.6% 59.4%
838
1225
80.5
Correlation based on 4’ luminaire S122DIP-U2-235-SC48-ST0048-1D-UDD-1-NA-W, Report: P27986
Mounting Information - Refer to installation instructions for detailed mounting information
2ft Individual (0024)
Wire Feed
8ft Individual (0096)
25”
(635mm)
Wire Feed
97”
(2464mm)
Mounting
Locations
0.50”
(12.7mm)
24”
(610mm)
Mounting
Locations
0.50”
(12.7mm)
0.50”
(12.7mm)
4ft Individual (0048)
Wire Feed
Mounting
Locations
0.50”
(12.7mm)
0.50”
(12.7mm)
12ft Individual (0144)
49”
(1245mm)
48”
(1220mm)
96”
(2438mm)
0.50”
(12.7mm)
Wire Feed
0.50”
(12.7mm)
Mounting
Locations
145”
(3683mm)
144”
(3658mm)
0.50”
(12.7mm)
Lens Information - Direct (Downward) Lens Details
1”
26 mm
1 - Flush Satin Diffuser
Asymmetric Flush Diffuser
Regressed Satin Diffuser
Lens Information - Indirect (Upward) Lens Details
NA - No Diffuser (standard)
5 - Flush Satin Diffuser
1”
26 mm
4 - Satin Drop Down Diffuser
Neo-Ray
I N T E GRATED SENSO R DETAI LS AN D PLACEM EN T 13
Sensor Series
4ft
Individual
8ft
Individual
SV
Integrated Sensor
for Local Control
LWI
Lumawatt Pro
Wireless Integral
Occupancy
Technology
P
Passive
Infrared
Sensing
Technology
D
Dimming
Daylight
Harvesting
(Closed Loop)
Coverage
Pattern
1
~144 ft2
12ft
Individual
NOTES
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
11. 12. 13. Additional lower light levels available. Please consult factory for specific details.
Not all ceiling types are shown; consult factory for specific ceiling types not listed.
All lengths are nominal. Refer to submittal drawings for actual sizes.
Not all dimming options available for every length; please consult factory for specific details.
For configurable runs specify length to nearest foot. Standard runs ship in 12ft increments. Ensure to specify 8ft increments if 12ft
are too large to recieve. Additional charges may apply; please consult factory for details.
347V is achieved using remote transformer.
FifthLight DALI is achieved using digital analog converter.
Battery pack options are not available in every length; please consult factory for specific details. Battery pack is remote installation only.
For all options; consult factory for specific requirements.
Not available with 347V circuit.
Asymmetric lens is not available as standard product on regressed housing RDR.
Standard product is configured with snap-in lens end caps at the beginning and end of a run or individual fixture. End caps are provided
for ease of installation and removal of the lens and eliminate light leak from the end of the fixture when flush satin lens is selected.
Please contact factory if lens end-caps are not desired as alternate configurations are available.
Integrated LumaWatt Pro Sensor available as a PDR in 4ft, 8ft, and 12ft configurations. Continuous runs and alternate lengths are also
available. Please consult factory for details. One sensor for every 8ft of fixture length. Standard configurations include Universal
voltage, single circuit and ‘DD’ driver selection. Not available with regressed housing or emergency options.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton Lighting
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Specifications and
dimensions subject to
change without notice.
PS524034EN
2017-02-22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising