Downlighting LyteCaster

Downlighting LyteCaster
Project:
Downlighting
Location:
Cat.No:
Type:
LyteCaster
Lamps: Qty:
Notes:
5" Round downlight
1000 Lumens
Philips Lightolier LyteCaster LED Downlights feature a 3.5" luminaire height
that conserves plenum space without compromising the 70 ° physical and
reflected cutoff. The modular and interchangeable light engine allows for
an easy future upgrade. The downlight is wet location listed and comes
in 3 standard options.
Complete product = Frame-in kit + Adjustable light engine / Trim Order each separately
Ordering guide: Frame-In kit
Series
Example: L5RAE1VA
Frame type
Dimming
Input voltage
L5R
L5R
LyteCaster 5" Round
Version
VA
A
AirSeal IC, New Construction, Screw
ANAirSeal IC, New Construction, Nail
E ELV dimming
1 120V
Z10
0-10V
U Universal
Ordering guide: Light engine
Series
Example: L5R10827VA
Lumens
CRI
CCT
10
L5R
L5R
LyteCaster 5" Round
VA Version A 1
Version
VA
10
1000
8
80
27 2700K
30 3000K
35 3500K
40 4000K
9
90
27 2700K
VA Version A 1
Note: Lumen output is calculated based on 80 CRI and 3500K CCT. Please consult adjustment factors table on page 4 for other lumen outputs.
Ordering guide: Trim
Series
Example: L5RDW
Luminaire type
Finish
D
Open Downlight
D Clear diffuse (with white flange)
W White (with white flange)
B
Baffle Downlight
W White (with white flange)
L5R
L5R
LyteCaster 5" Round
1. Version A (VA) frames and light engines are not compatible with previous versions.
LyteCaster L5R Downlight Spec 12/15 page 1 of 4
BAFFLE TRIM
4 3/8"
(111mm)
6 1/8"
(155mm)
8"
(202mm)
FRAME-IN KIT
5"
13" Min. (330mm)
24" Max. (610mm)
2 5/16"
(59mm)
L5R 5" LyteCaster 5" Round
4 3/8"
2"
13 1/(111mm)
6 1/8"
(342mm)
(155mm)
11 5/8"
(296mm)
General purpose downlight, 1000 lumens
Frame-in kit
5"
BOTTOM VIEW
8 1/4"
(210mm)
Bottom view
Side view
11 1/2"
(292mm)
13 1/2"
(342mm)
11 5/8"
(296mm)
8 1/4"
(210mm)
8"
(202mm)
3 3/8"
(86mm)
5"
2 5/16"
(59mm)
5"
(127mm)
13" Min. (330mm)
24" Max. (610mm)
5 1/2"
(140mm)
Cut out
6 7/16"
(163mm)
DOWNLIGHT TRIM
1 1/4"
(32mm)
FRAME-IN
KIT
Max.
ADJUSTABL
8"
(202mm)
BOTTOM VIEW
Downlight trim
13" Min. (330mm)
24" Max. (610mm)
5"
Light engine
2 5/16"
(59mm)
4 3/8"
(111mm)
6 1/8" WARM GLOW
(155mm) LIGHT MODULE
11 "
(292mm)
1/2
BOTTOM VIEW
3 3/8"
(86mm)
FRAME-IN KIT
LIGHT MODULE
5"
1 1/4"
13 1/2"
11 1/2"5 1/2"
Electrical
(32mm)
(342mm)
WARM GLOW
(140mm)
(292mm)
LIGHT MODULE
5/8
1.Housing: .026" galvanizedCut
steel.
lifetime
clips: Permit easy
6.Driver: ELV: 120V,
out 4. Retaining Max.
11 50/60Hz.
" LIGHT MODULELifetime: Expected
UL listed for direct contact with
50,000 hours and backed by a
and fast installation of
RoHS compliant,
Class 2 power
(296mm)
1
3
/
/
4
thermal insulation. Airseal®
5-year warranty.
light engine/trim. 3 8"
supply. Complies with FCC 8 "
(210mm)
(86mm)
DOWNLIGHT TRIM
housing minimizes air leakage
(seeTRIM
Philips.com/warranties
rules
per Title 47
Part 15 (Class BAFFLE
ADJUSTABLE
TRIM
5. Mounting bars: .059"
to less than 2 CFM at 1.57PSF
for details)
B) for EMI / RFI (conducted &
galvanized steel. Bars pivot
(or 75PA), which complies
radiated). Class A sound rating.
for easy attachment
and
Recommended dimmers
with Title 24, the International 5 1/2"
0-10V: 120/277V, 50/60Hz.
1 1/4"
wire-in below ceiling line.
(32mm)
Energy Conservation Code, and
RoHS compliant, Class 2 power
(140mm) Bars extend to
See LED-DIM Specification Sheet.
accommodate
Washington State Energy Code
supply. Complies with FCC
Cut out 16" (406mm) toMax.
24" (610mm)
(Section 502.4). This reduces
rules per Title 47 Part 15 (Class
Labels
O.C. joist spacing. Bars can
heat loss and condensation
A) for EMI / RFI (conducted &
accommodate 12" (305mm)
cULus
Listed
BAFFLE
TRIM Type I.C., frames
DOWNLIGHT TRIM
in ceiling. Access door for
radiated).
Class A sound
ADJUSTABLE
TRIM rating.
O.C. joist spacing after a
are suitable for damp location.
inspection of junction box.
slight field modification (see
7. Ceiling cutout: 5 ½" (140mm).
Trims are cULus suitable for
2. Lower frame and top cover:
Instruction sheet). Features
wet13"
location
(no shower lens
8"
Min. (330mm)
Options and Accessories
.026" galvanized steel.
integral self tapping phillips/
unit
required).
Complies with
(202mm)
24"
Max. (610mm)
Accommodates
ceilings up to
square drive screws for secure
FRAME-IN
KIT
For fire rated box accessory, use
Air Leakage.
1 ¼" (32mm) thick. 3/8" (9.5mm)
attachment to wood or metal
Fireline:
deep integral lip with four
construction. Also available
notches at 90° apart to simplify
with integral nails. Attaches
16FR2X10 16" on center 2x10
alignment. Locks into position
to T-bar ceilings without the
construction
along length of mounting bars
need of accessories. Bars
16FR2X6
16" on center 2x6
with locking screws.
installed on shortest dimension
construction
of frame,but can be easily
3. Junction Box: 2.5" X 5 3/8" X
BOTTOM VIEW
repositioned 90 degrees from
See
Fireline
spec
sheets for more
2" (27 cu. in) .032" galvanized
original position.
information.
steel. UL listed 90 ˚ supply
Features
conductors. Rated for branch
circuit wiring supplying
connected luminaires (daisy
chaining).
11 1/2"
(292mm)
3 3/8"
(86mm)
LyteCaster L5R Downlight Spec 12/15 page 2 of 4
5 1/2"
(140mm)
Cut out
1 1/4"
(32mm)
Max.
L5R LyteCaster 5" Round
General purpose downlight, 1000 lumens
Reflector: Round downlight
1
5" Std
7
2
3
4
5
6
1.Housing: (0.05”) thick
powder coated aluminum
provides integrated thermal
management allowing for a low
profile at less than 3-1/2” tall.
2. LED board: High efficiency
mid-flux LED’s.
3. Mixing chamber: 98% reflective,
highly diffuse film.
4. Diffusion lens: (0.06”) thick
acrylic opal lens provides an
even source of illumination.
5. Retaining ring: (0.04”) thick
powder coated aluminum,
secures module components.
6.Reflector: 30% glass reinforced
injection molded polycarbonate
is durable and provides a 70°
cutoff to the source.
7. Retaining clips: 29 gauge
Stainless Steel, allows
tool-less installation of
light engine to trim.
Electrical
Screw / Nail Frame-in kit
Electrical specifications
L5RAE1VA
L5RAZ10UVA
Input volts Input freq.
Input current
LED drive current
Input power
LED power THD factor Power factor
120V
50/60Hz
0.10A
260mA
12W
10W
<20%
>0.9
120V
50/60Hz
0.11A
260mA
13W
11W
<10%
>0.9
277V
50/60Hz
0.06A
260mA
13W
11W
<15%
>0.9
1
LyteCaster L5R Downlight Spec 12/15 page 3 of 4
6" Std
7
2
L5R LyteCaster 5" Round
General purpose downlight, 1000 lumens
80 CRI, 1000 lumens
200
400
600
Frame: L5RAE1VA
Light engine: L5R10835VA
Trim: L5RDW
Output lumens: 1190 lm
Input Watts1:
11.6 W
Spacing Criterion: 1.2
Angle Mean CP Lumens
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
546
541
529
515
490
459
429
385
340
289
236
184
135
91
63
45
28
12
0
51
Single unit data
5'
6'
7'
8'
9'
145
212
241
222
Coefficients of utilization
Height to
Initial Center Beam Beam
Dia. (ft)*
Lighted Plane
Foot-Candles
22
15
11
9
7
6.0'
7.2'
8.4'
9.6'
10.8'
* Beam diameter is where foot-candles
drop to 50% of maximum.
165
93
48
Spacing
on center
Initial Center Beam
Foot-Candles
5'
6'
7'
8'
9'
49.5
32.5
23.2
19.3
15.5
13
Report no3: 685GFR
Efficacy: 102.6 lm/W
3500 K
CCT 2:
CRI:
≥ 80
Multiple unit data - RCR 2
Watts
per Sq. Ft.
38'x38'x10' Room, Workplane 2.5'
above floor, 80/50/20% Reflectances
0.51
0.34
0.24
0.20
0.16
Ceiling
Wall
80%
70
RCR
Room Cavity Ratio
Candela Curves
50
30
70%
10
50
50%
10
50
10
30%
50
0%
10
0
Zonal cavity method - Effective floor reflectance = 20%
0
1
2
3
4
5
6
7
8
9
10
119
110
101
93
86
80
74
69
64
60
56
119
106
94
84
75
68
61
56
51
47
44
119
102
88
76
67
59
53
48
43
40
36
119 116 116
99 104 97
83 92 82
70 82 70
61 74 60
53 67 53
47 60 47
42 55 42
38 51 38
34 47 34
31 43 31
111
99
89
79
71
65
59
54
49
46
42
111 106 106
94 96 91
80 85 78
69 77 67
60 69 59
52 63 52
47 57 46
42 52 41
38 48 37
34 45 34
31 41 31
Zonal lumens & percentages
CRI and CCT
adjustment factors
Zone Lumens %Luminaire
90CRI 2700K: = 0.71
0-30
0-40
0-60
0-90
408
649
1036
1190
34.3%
54.5%
87.1%
100.0%
100
87
74
64
56
49
44
39
35
32
29
80CRI 2700K: = 0.89
80CRI 3000K: = 0.97
80CRI 3500K: = 1.00
1. Wattage: controlled to within ± 5%
2.Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C78.377-2008: Specifications for the Chromaticity of Solid State Lighting Products.
3.Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products.
© 2015 Koninklijke Philips N.V. All rights reserved.
Philips reserves the right to make changes in specifications
and/or to discontinue any product at any time without notice
or obligation and will not be liable for any consequences
resulting from the use of this publication.
philips.com/luminaires
LyteCaster L5R Downlight Spec 12/15 page 4 of 4
Philips Lighting, North America Corporation
200 Franklin Square Drive, Somerset, NJ 08873
Tel. 855-486-2216
Philips Lighting Canada Ltd.
281 Hillmount Rd, Markham, ON, Canada L6C 2S3
Tel. 800-668-9008
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising