Manufacturer`s Specification Sheet

Manufacturer`s Specification Sheet
TRUE FOOD SERVICE
EQUIPMENT, INC.
2001 East Terra Lane • O’Fallon, Missouri 63366
(636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
AIA #
Project Name:
Location:
Item #:
SIS #
Qty:
Model #:
Horizontal Freezer:
Model:
TFM-51AL
Glass Angled Lid
TFM-51AL
True’s horizontal freezers are
uniquely designed to promote
high-profit frozen novelties in high
impulse retail traffic areas. Ideal
for bolstering incremental sales of
frozen merchandise and seasonal
specialties.
Cold wall, environmentally friendly
(134A) refrigeration system.
Maintains -10°F (-23.33°C), ideal for
both ice cream and frozen food.
Exterior - non-peel or chip white
laminated vinyl, durable and
permanent; with gray mitered
plastic top and lid frames.
Interior - NSF approved, white
aluminum with 300 series stainless
steel floor.
Angled tempered, hard coated,
"Low-E" glass slide lids. Reduces
solar heat gain, enhances
energy efficiency and minimizes
condensation.
Locks standard, provide security,
prevents theft.
Convenient defrost drain.
2 1/2" (64 mm) diameter stem
castors.
Entire cabinet structure is foamedin-place using Ecomate. A high
density, polyurethane insulation
that has zero ozone depletion
potential (ODP) and zero global
warming potential (GWP).
Rough-In Data
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Cabinet Dimensions
(inches)
(mm)
Model
TFM-51AL
Lids
2
L
D
H*
HP
Voltage
Amps
NEMA
Config.
511/4
263/8
315/8
1/3
115/60/1
4.1
5-15P
1302
670
804
* Height does not include 31/4" (83 mm) for castors & 5/8" (16mm) for lid handle.
Approvals:
Printed in U.S.A.
Available At:
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
9
215
2.74
98
Model:
Horizontal Freezer:
TFM-51AL
Glass Angled Lid
Standard Features
DESIGN
• True’s horizontal freezers are
uniquely designed to promote
high-profit frozen novelties in high
impulse retail traffic areas. Ideal for
bolstering incremental sales of frozen
merchandise and seasonal specialties.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free)
134A refrigerant.
• Cold wall refrigeration system.
Maintains -10° F (-23.33°C) cabinet
temperature, ideal for both ice cream
and frozen food.
• Condensing unit is accessed from
behind grill on right side; slides out
for easy maintenance.
• Manual defrost system; convenient
drain located on front of cabinet.
CABINET CONSTRUCTION
• Exterior - non-peel or chip white
laminated vinyl, durable and
permanent; with gray mitered plastic
top and lid frames.
• Interior - attractive, NSF approved,
white aluminum liner; non-rust, peel
or chip. 300 series stainless steel floor.
• Insulation - entire cabinet structure
is foamed-in-place using Ecomate. A
high density, polyurethane insulation
that has zero ozone depletion
potential (ODP) and zero global
warming potential (GWP).
• 2 1/2" (64mm) diameter stem castors.
LIDS
• Angled tempered, hard coated,
"Low-E", single pane glass slide lid
assemblies. The latest in energy
efficient technology; reduces
solar heat gain and minimizes
condensation.
• Designed for convenient access, fast
service and attractive display.
• Lid lock standard.
MODEL FEATURES
• Self-contained, portable system. No
plumbing required.
• Low profile design permits easier
placement, saves aisle space.
• Interior mounted thermometer.
• NSF-7 compliant for open food
product.
ELECTRICAL
• Unit completely pre-wired at factory
and ready for final connection to a
115/60/1 phase, 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/
ACCESSORIES Upcharge and
lead times may apply.
❑❑Black vinyl exterior.
❑❑Heavy duty novelty baskets
(accommodates 4).
❑❑Dividers for novelty baskets.
Plan View
Cubic Feet/Liters 13.3/379
* Based on ANSI/AHAM HRF-1-2004
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
Model
Elevation Right
Plan
3D
Back
TFM-51AL
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising