The GSL Series Loader* with standard brushless motor

The GSL Series Loader* with standard brushless motor
Gold Standard Brushless Loader
GSL Series: 19 lb. ( 8.6 kg.) Capacity
Based on PC Pellets @ 38 lb/ft3
The GSL Series Loader* with standard brushless motor, pendant control and
pivot access, boasts a 5-Year Warranty – No Exclusions!
CONVEY
Brushless loader motors last 4 to 5 times as long as motors
with brushes. Tired of changing brushes, constantly cleaning loader filters and having load failures because of pellets
getting stuck between the throat and the flapper valve? The
GSL Series Loader solves all of these problems and more!
• Long Life Brushless Motor Reduces Maintenance
and has a 5-Year Warranty
Brushless motors last 4 to 5 times as long as brushed
motors because in addition to brush wear, the
commutator also wears, creating an increasing gap for
sparks and for contamination to occur. These factors
cause brushes to wear down faster and faster with each
change, leading to added maintenance and downtime.
In fact motor manufacturers recommend discarding
vacuum motors after 3 brush sets due to this very issue.
• Double Pivot Access
Loader operates in upright position then pivots and locks
in place for easy access.
• Full-featured, Standard Plug-In Pendant Control
User-friendly, full-featured control is mounted on loader.
A 12’ cable (standard) puts control at your fingertips, so
changing loader parameters is easy.
• Patent Pending MicroBurst Filter Cleaning Keeps
Filters Clean
High intensity, sequential MicroBurst of air blasts the
whole filter area to remove dust and fines and ensures
that dump throat is clear for proper sealing.
• SureSeal Flapper Valve Avoids Loading Failures
First, there is no gasket to trap pellets or wear out.
Second, the patented MicroBurst ensures that any
residual dust is removed from the dump throat flapper.
This reduces maintenance allowing the loader to work at
top efficiency.
*GS Loader patent pending
GSL-19
GSL-19
Closed & Open
Plus:
•
•
•
•
•
•
•
115V/1ph/50-60 Hz operation
15 ft. (4.6m) length of flex hose, pickup wand and hose clamps
Dual reinforced polyester disc
filter media
All material contact points are
non-ferrous
Dump Valve with integrated
demand level switch
on standard models
Conveying rate up to 1000 lb/hr
5-Year warranty
Application
Brushless Vacuum Motor Lasts 4X Longer with No Brush Changes!
GSL
BRUSHLESS
Vacuum Motor
Conventional
BRUSH type
Vacuum Motor
5000 HR Runtime - 5 Year Warranty
$$$
1250 HR
3 Brush Sets
1250 HR
3 Brush Sets
$$$
1250 HR
3 Brush Sets
$$$
1250 HR
3 Brush Sets
No Warranty
GSL-19 Loader
15’ Flex Hose
with Clamps
Control Pendant can be
Loader or Remote Mounted
(12’ Pendant Included)
Magnetic Backed Control
Pendant Mounts on Hopper
and other Metal Surfaces
Convenient to the Operator
Pick-up Wand
Full-featured control includes load time,
no-load alarm, alarm light and silencer as
well as proportioning and purging.”
Upright Operating Position
Brushless Vacuum Motor for
Long-Life and
Reduced Maintenance
Isolated Exhaust Air Protects
Motor From Fines
Adjustable Inlet Position for
Convenient Installation
Removable Control Pendant
for Remote Operation
Modular Construction for
Easy Installation
Discharge Shroud Protects
Dump Throat
CONVEY
Loader pivots forward from operating position and captive
detent pin locks loader in place during operation. Lid pivots
back and locks in place for easy access.
Easy Pivot Access
for Clean out
Pivot Position for Easy Access
Hinge Design Holds
Lid Open For Cleaning
MicroBurst Blowback
Stainless Steel Body
Locking Base
Cast Aluminum Cone/Pivot Stop
Specifications:
Model
Capacity* Inlet O.D.
Motor
amps/hp
Discharge
Diameter
GSL-19
19 lb.
1.5
14/1.3
3
GSL-19-MM
19 lb.
1.5
14/1.3
3
56.60°
37.11
*Based on PC pellets @ 38 lb./ft3
**Pivoting and opening top requires 6” ( 15.2 cm) for clearance on
GSL-19. Recommended throughput: GSL-19 = up to 1000 lb/hr. (450 kg/hr)
GSL-19-MM Machine Mount Model includes 8 lb. JIT Glass Hopper with
height adjustable photo eye demand switch. Overall height = 42.75
30°
Accessories:
(Show as separate line item on order - shipped with Unit) See price list #302.)
19.58
Replacement Plug-N-Play Control Pendant with 12 ft. cable:
Part # GVL-CP (One included with each GSL)
Replacement 12 ft. cable:
Part # ehccF-XL
External Proportioning Valve: (Includes coupler, wand, hose and clamps.)
1.5” O.D Part# EPV-15T-24
2.0” O.D. Part# EPV-20T-24
Level Switch, Capacitance, 30mm dia., 2m cable:
Part # LSC-30
Capacitance Level Switch in lieu of Photo-eye Sensor
(for GSL-MM models): Part # KIT-C022
31.01
5.16
Options:
GSL-19
Dimensions
2” Inlet (in lieu of 1.5”): Add -20 to P/N (GSL-19-20 or GSL-19-20-MM)
15.67
21.23
48.35
14.00
42.29
10.38” O.D.
9.00” Dia
Bolt Hole Circle
14.22
.3125” Dia.
Typ. (4 places)
GSL-19-MM
Flange Dimensions
6” x 6”
GSL-19-MM
Dimensions
·
Mounting Flexibility
Standard mounting hole pattern
plus adapter ring allows GSL to
replace any NOVATEC loader as
well as competitive models.
222 East Thomas Avenue Baltimore, MD 21225 USA Phone: 410-789-4811 • Fax: 410-789-4638 • 1-800-BESTDRY (800-237-8379) • sales@novatec.com • www.novatec.com
All information in this bulletin is subject to change without notice.
© 2013 NOVATEC, Inc. All rights reserved
Form #GSL 2013-05-21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising