高 清 车 载 摄 像 机
FHD-Car Black BOX
Operating Instructions
Button Introduciton
1. 2.7” screen
2. Power/Menu
3. Mode/Compulsive Recording/Up
4. Down
5. Confirm/Recroding
6. MIC hole
7. HDMI port
8. TF card slot
9. Reset
10. Super Night Vision Lamp
11. Speaker
12. Camera
13. Bracket Slot
14. GPS-IN port
15. USB port
16. TV OUT
Accessoris:AV Cable, USDB Car Charger, USB cable, Bracket, User manual,
GPS module (optional)
Function and Operation
Installment
This DVR is very easy to install, put the bracket on the windshield, connect
the USB car charge to cigarette lighter, and hide the cables.
Charging:
A. Power supplied by rechargeable Li-battery
Charging way:(1)connect to USB Car charger (2)connect to PC with
USB cable
The red indicator will be on when charging, when battery is full, the red
indicator will be off.
B. Connect to USB car charger
DVR will start recording automatically recording when engine starts. 10
sec after car power off, DVR will turn off and save the previous video file
automatically.
Video Recording Mode
Long press power button (2) or connect to USB car charger, DVR will go to
video recording mode automatically(Pls insert TF card)Now, the blue
indicator will flash, file will be saved in TF card automatically. When unplug
USB car charger or long press power button (2) to shut down the DVR, the
blue indicator will stop flashing.
Emergency Lock
Short press Mode button (3) when recording, will lock the current video file,
i.e. this file will not be deleted in loop recording.
DC Mode
Turn on DVR and press Play button (5) to stop video recording, and then
short press Mode key (3) to enter DC mode, press Confirm button (5) to take
photos.
View and Delete Files
Turn on DVR and press Play button (5) to stop video recording, short press
Mode button (3) twice to enter photo playback mode, and short press Mode
button (3) again. Press UP (3) and DOWN (4) button to select file and press
Confirm button (5) to display or preview. If need to delete file, press Menu
button (2) after file stops display to enter delete mode. Press Down button (4)
to select delete or format. Keep pressing Menu button (2) to quit operation.
Function Setting
Turn on DVR and stop recording, press Menu button (2) to enter Menu
Setting. Select desired parameter by UP/DOWN button, press Confirm button
(5) to confirm operation. Press Menu button (2) to quite Setting when finish
all the settings.
1. Video resolution:1080FHD 1920×1080(default),720P 1280×720,
WVGA(848×480),VGA 640×480
2. Loop recording:off,1min,2 min,3 min,5 min,10 min
3. WDR:on,off (default);
4. Exposure compensation:-2~2
5. Motion detection:On,off (default);when enabled, it will start video
recording when there is moving object, otherwise it will stop recording.
6. Video sound:on (default),off
7. Date tag:on (default),off
8. G-SENSOR:off,low,mid,high
9. GPS:on,off (default);when choose to buy the GPS module, can choose
to enable, can view the car track and speed by special display software
10. Plate Number:input your plate number manually
11.Date/time : Press Menu button (4) twice in standby mode to enter
date/time setting, press UP/DOWN to set and press CONFIRM button (7)
to save.
12.Auto power on/off:off (default),3 min,5 min,10 min
13.Key sound:on (default),off
14.Language:support multi-language
15.TV system:PAL( default),NTSC
16. Light source frequency:50Hz(default),60Hz
17.Screen saver:off (default),1min,3min,5min
18.LED setting:off (default),on
19.Auto set EV:it will judge day or night automatically according to the
system time to adjust the exposure parameter to optimize the video effect
(this function requires the correct system time)
20.Format:format TF card
21.Default Setting:resume to the default
22.Version:display the software version and issue time
Download file
Connect DVR to PC via USB cable, there will be 2 options (Storage/PC
camera), do not forget to insert TF card, choose “storage” to download
files.
HDMI output
Connect DVR to TV via HDMI cable, the HD images will display on TV
GPS input
Connect external GPS module (optional), can check the car track
Specification
1. Video resolution: ( 1920×1080 ) ( 1440×1080 ) (1280×720)
(848×480)(640×480)(320×240)
2. Compressed format:H.264
3. Loop recording /Motion detection
4. Power supply:rechargeable Li-battery/USB car charger/portable power
5. TF Card:up to 32G
6. Sound recording:can select on or off
7. Input:GPS signal input
8. Output:HDMI output
9. Lens: AR0330 Sensor
10. Night vision lamp:1 super night vision lamp
11. Display: 2.7” TFT LCD
12. Battery:250mAh anti-explosion Li-Polymer battey
13.Working temperature:-20℃ ~ +65℃
FAQ
Pls refer to the below solutions if there are problems during normal
operation:
Ⅰ.Video lagged
1. Because the video is real 1920*1080P, so if the video will be lagged on
some low configuration computers, so pls change a better computer.
2.The USB modules on the main board of different brands are different, some
may cause the card reader reading lag. So pls change a card read or
download the video file to the PC hard disc to display.。
Ⅱ.DVR does not work (dead)
1.Use charge object (such as pin, needle) to inset into the RESET hole to
reboot the system.
2.Mostly it is due to the over current protection of the DVR, so pls avoid to
exposure the DVR under strong sun light for long time.
3.Format the TF card.
Ⅲ.Screen flashing against the fluorescent lamp
Fluorescent lamp has its own frequency, set the DVR frequency to 50 or
60Hz can solve this problem.。
Ⅳ.Video indistinct
1.Clean the lens with cloth by alcohol or other cleaners, avoid touch the lens,
also keep the windshield clean.
2.Check whether the lens protective film has been removed.
Ⅴ.Photo indistinct
Pls fix the DVR on the bracket to take phone, because it is not professional
DC, does not have anti-shake function.
Ⅵ.Too bright at daytime
It may too bright when the lens against the sun, pls adjust the EV value to
“low” if there is special requirement. The default EV value is 0, can just
between -2 to +2.
Ⅶ.Too dark at night
If the video is too dark at night, adjust the EV value to “high”, but it may too
bright at daytime. The default EV value is 0, can just between -2 to +2.
Ⅷ.Display memory card full or do not record, auto power off, recording
lagged
Pls format the TF card by DVR format function.
Ⅸ. Cannot turn on by pressing the power button without connecting to
carcharger
It will enable the battery protection when the battery is fully charged to
prevent more electricity into the battery, so it may cause cannot turn on the
DVR by pressing Power button, pls press RESET button by sharp object or
charge by car charger one more time will solve this problem.
PS. Real operation is different from this manual
Due to software updates, if there are any operation differences, pls ask the dealer for the
latest manual.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising