Type II / Type IIIA / Type IIIB / RCMP Security

Type II / Type IIIA / Type IIIB / RCMP Security
®
CRD Distribution Inc.
Type II (Level 6) / Type II / Type IIIA / Type IIIB / RCMP Security Equipment Guide listed Machines
The easiest and most effective way to protect government information is to shred it with a Dahle
high security paper shredder, for secure document destruction of your Protected A, B, C,
Secret, Top Secret and COMSEC information.
Small Office
Office
Department
Te l : 8 7 7 . 9 7 4 . 3 6 7 8 / F a x : 5 1 9 . 4 7 4 . 0 6 6 1 / E m a i l : i n f o @ c r d d i s t r i b u t i o n . c a / We b : w w w. d a h l e . c a
High Capacity
Canadian Government Standards
Federal Government approved paper shredders
Approved destruction equipment and processes are limited to specified media and security classifications and are
listed in the Security Equipment Guide (SEG). The SEG is available to government departments only and can be
found on the internet at: http://www.rcmp-grc.gc.ca/physec-secmat/res-lim/pubs/seg/html/home_e.htm
Types of Paper Shredders
Type II (Level 6) - A special sub-category reserved for NSA (USA) approved high security paper shredders. These are
recommended for cases where a TRA recommends a higher degree of security (eg: embassies, overseas deployments,
smaller than 12 point text size).
Type II - A shredder approved for the secure destruction of Secret, Top Secret and Protected C information written
on paper or other text based media. Type II destruction equipment have been assessed as capable of reducing
information classified Secret, Top Secret and Protected C or lower to a size that, under the threat and risk conditions
existing in urban Canada and with known reconstruction methodology, is deemed safe to dispose of or recycle as
unclassified waste.
Type III - a shredder approved for the secure destruction of Confidential and Protected B (subject to a TRA)
information written on paper or other text based media. Type III destruction equipment is capable of reducing
information classified Confidential and Protected B or lower to a size that, under the threat and risk conditions
existing in urban Canada and with known reconstruction methodology, is deemed safe to dispose of or recycle as
unclassified waste.
Type IIIA and Type IIIB - Sub-categories of Type III for office shredders. Type IIIA is for regular use and Type IIIB is
for the destruction of information in bulk (only).
Only equipment that is submitted for testing and meets all requirements of the RCMP standard DNI (2005) is listed
in the SEG. Such requirements include electrical safety certification, sound levels to the Canadian Occupational
Health and Safety requirements and standardized throughput rate categorization. SEG listed equipment must be
supported by an authorized Canadian distributor providing complete repair and maintenance services.
Classification
Protected B
General Office Use
(where a TRA recommends the
use of approved equipment)
Bulk Destruction
IIIA
Shred Size
Maximum
2mm x 15mm
IIIB
6mm x 50mm
Type
Disintegrator
Comments
Screen Size
10mm
Type IIIB equipment is approved for bulk
destruction only and must not be used
for periodic destruction
13mm
Protected C
General Office Use
II
1mm x 14.3mm
6mm
Confidential
General Office Use
IIIA
2mm x 15mm
10mm
Bulk Destruction
IIIB
6mm x 50mm
13mm
Type II
1mm x 14.3mm
6mm
Secret & Top Secret
General Office Use
(extract from the RCMP SEG - Destruction Equipment Selection, Section 2)
Select Type II (Level 6) equipment where
a TRA recommends
Type IIIB equipment is approved for bulk
destruction only and must not be used
for periodic destruction
Select Type II (Level 6) equipment where
a TRA recommends
DAHLE Professional Type II (Level 6)
Dahle Type II (Level 6) paper shredders exceed the security and performance standard of the RCMP Destruction Standard
and are recommended for a higher degree of security. In order to destroy highly sensitive information of national interest,
our military and government departments require higher levels of security from the paper shredders. The Type II (Level 6)
models have been further endorsed by the U.S. National Security Agency to reduce an 216mm x 279mm (8 1/2" x 11") piece
of paper into 16,000 particles 1mm x 4.7mm in size (NSA/CSS Specification 02-01) and it is impossible to reassemble any
document you shred with these machines.
40334 Small Office Shredder
•
•
•
•
•
•
•
•
•
40434 Office Shredder
Shred Size: 1 mm x 4.7 mm - Type II, (Level 6)
Feed Width: 260mm (10 1/4")
Sheet Capacity: 6/8
Motor: 648 Watts (.87hp)
Waste Volume: 92 L / 23 Gallons
Dimensions, mm: 864 H x 540 W x 432 D
Dimensions, inches: 341/4 H x 211/2 W x 171/8 D
SmartPower Management
Integrated Auto Oiler
40534 Department Shredder
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Shred Size: 1mm x 4.7mm - Type II (Level 6)
Feed Width: 260mm (101/4")
Sheet Capacity: 8/10
Motor: 900 Watts (1.2hp)
Waste Volume: 120 L / 30 Gallons
Dimensions, mm: 914 H x 533 W x 432 D
Dimensions, inches: 363/4 H x 211/2 W x 171/2 D
SmartPower Management
Integrated Auto Oiler
20394 High Capacity Shredder
Shred Size: 1mm x 4.7mm - Type II (Level 6)
Feed Width: 310mm (12")
Sheet Capacity: 8/10
Motor: 900 Watts (1.2hp)
Waste Volume: 152 L / 38 Gallons
Dimensions, mm: 876 H x 737 W x 508 D
Dimentions, inches: 341/2 H x 29 W x 20 D)
Integrated Auto Oiler
•
•
•
•
•
•
•
•
•
•
Shred Size: 1mm x 4.7mm - Type II (Level 6)
Feed Width: 405mm (16")
Sheet Capacity: 9 / 11
Speed: 10.7 m/min (35 ft/min)
Motor: 1500 watts (2 hp)
Dimensions, mm: 1181 H x 699 W x 610 D
Dimensions, inches: 461/2 H x 271/2 W x 24 D
Waste Volume: 200 L / 50 Gallons
Chain driven providing slip free power
Fully automatic
DAHLE CleanTEC® Type II (Level 6)
The DAHLE CleanTEC® advantage is an intelligently designed shredder that provides air filtration (traps up to 98% of fine
dust particles), highly advanced safety features, ESP protection, and integrated automatic oiler along with added benefits
such as Dahle’s SmartPower Energy Management System.
41334 Small Office Shredder
•
•
•
•
•
•
•
•
•
•
Shred Size: 1mm x 4.7mm - Type II (Level 6)
Feed Width: 260mm (101/4")
Sheet Capacity: 5/6
Motor: 648 Watts (.87hp)
Waste Volume: 92 L / 23 Gallons
Dimensions, mm: 864 H x 540 W x 432 D
Dimensions, inches: 341/4 H x 21½ W x 171/8 D
DAHLE CleanTEC® Filtration
Safe Technology & SmartPower Management
Integrated Auto Oiler
41534 Small Department Shredder
•
•
•
•
•
•
•
•
•
•
Shred Size: 1mm x 4.7mm - Type II (Level 6)
Feed Width: 310mm (12")
Sheet Capacity: 8/10
Motor: 900 Watts (1.2hp)
Waste Volume: 152 L / 38 Gallons
Dimensions, mm: 876 H x 737 W x 508 D
Dimentions, inches: 341/2 H x 29 W x 20 D)
DAHLE CleanTEC® Filtration
Safe Technology & SmartPower Management
Integrated Auto Oiler
41434 Office Shredder
•
•
•
•
•
•
•
•
•
•
Shred Size: 1mm x 4.7mm - Type II (Level 6)
Feed Width: 260mm (101/4")
Sheet Capacity: 8/10
Motor: 900 Watts (1.2hp)
Waste Volume: 120 L / 30 Gallons
Dimensions, mm: 914 H x 533 W x 432 D
Dimensions, inches: 363/4 H x 211/2 W x 171/2 D
DAHLE CleanTEC® Filtration
Safe Technology & SmartPower Management
Integrated Auto Oiler
DAHLE Deployment Shredder Type II (Level 6)
Do you need a portable shredder to destroy Top Secret documents in the field? Dahle’s Deployment Shredder exceeds the
RCMP Destruction Standard and is easily transported. The shredder itself features two solid steel cutting cylinders that will
reduce paper to a 1mm x 4.7mm particle size. A wooden cabinet and recessed handles make this machine durable and easy
to lift. The sliding drawer catches the shredded waste and allows for easy disposal. Inside this case, the shredder is protected
by foam padding and an airtight and watertight seal to prevent corrosion.
20434 DXC Deployment Shredder
•
•
•
•
•
•
•
•
•
Shred Size: 1mm x 4.7mm - Type II (Level 6)
Feed Width: 240mm (91/2")
Sheet Capacity: 4 / 6
Speed: 4 m/min (13 ft/min)
Motor: 375 Watts (1/2 hp)
Dimensions, mm: 457 H x 406 W x 356 D
Dimensions, inches: 18 H x 16 W x 14 D
Solid Steel cutting head
Hard lockable case is lined, airtight, watertight, and
corrosion proof
DAHLE Professional Type II
Dahle Type II paper shredders are approved for the secure destruction of Secret, Top Secret and Protected C information
written on paper or other text based media. Proficiency best describes Dahle shredders with their ability to get the job
done quickly and easily with minimal effort. Dahle is the best line of defense in preventing unauthorized access and to
destroy confidential information.
40330 Small Office Shredder
•
•
•
•
•
•
•
•
•
Shred Size: 0.8mm x 12mm (1/32" x 7/16") - Type II
Feed Width: 260mm (10 1/4")
Sheet Capacity: 6/8
Motor: 648 Watts (.87hp)
Waste Volume: 92 L / 23 Gallons
Dimensions, mm: 864 H x 540 W x 432 D
Dimensions, inches: 341/4 H x 211/2 W x 171/8 D
SmartPower Management
Integrated Auto Oiler
40530 Small Department Shredder
•
•
•
•
•
•
•
•
•
Shred Size: 0.8mm x 12mm (1/32" x 7/16") - Type II
Feed Width: 310mm (12")
Sheet Capacity: 10/12
Motor: 900 Watts (1.2hp)
Waste Volume: 152 L / 38 Gallons
Dimensions, mm: 876 H x 737 W x 508 D
Dimensions, inches: 341/2 H x 29 W x 20 D
SmartPower Management
Integrated Auto Oiler
40430 Office Shredder
•
•
•
•
•
•
•
•
•
Shred Size: 0.8mm x 12mm (1/32" x 7/16") - Type II
Feed Width: 260mm (10 1/4")
Sheet Capacity: 9/11
Motor: 900 Watts (1.2hp)
Waste Volume: 120 L / 30 Gallons
Dimensions, mm: 914 H x 533 W x 432 D
Dimensions, inches: 363/4 H x 211/2 W x 171/2 D
SmartPower Management
Integrated Auto Oiler
40630 Department Shredder
•
•
•
•
•
•
•
•
•
Shred Size: 0.8mm x 12mm (1/32" x 7/16") - Type II
Feed Width: 405mm (16")
Sheet Capacity: 11/13 Sheet Capacity
Motor: 1640 Watts (2.2hp)
Waste Volume: 180 L / 45 Gallons
Dimensions, mm: 965 H x 737 W x 508 D
Dimensions, inches: 38 H x 29 W x 20 D
SmartPower Management
Integrated Auto Oiler
DAHLE MHP Oil Free Type IIIB
Dahle Oil-Free MHP Shredders are not only convenient to use and economical to maintain, but also easier on the environment.
No oil is required for powerful, jam resistant shredding. Plus, MHP features Smart Power automatic shut down and a lifetime
warrantee on the cylinders.
Oil free shredding is made possible by the hybrid Matrix High Performance (MHP) cutting cylinders. Aggressive cutting
edges are fused to a solid steel shaft, creating an incredibly strong bond, and providing superior shredding capabilities. The
cylinders' Trident Grip design produces three continuous points of contact with the paper, pulling it straight through. This
smooth, even pull prevents the paper from becoming wedged to either side, providing unprecedented jam protection.
50464 Oil Free Small Department Shredder
•
•
•
•
•
•
•
•
•
•
•
Shred Size: 4mm x 38mm (3/16" x 11/2")
Feed Width: 305mm (12")
Sheet Capacity: 24 / 26
Speed: 6 m/min (20 ft/min)
Motor: 900 Watts (1.2hp)
Dimensions, mm: 457 H x 533 W x 940 D
Dimensions, inches: 18 H x 21 W x 37 D
Oil Free / Maintenance Free
Cutting Cylinders guaranteed for life
Trident Grip Jam Protection
Smart Power - powers down automatically
DAHLE CleanTEC Type IIIA
Dahle CleanTEC® models include CleanTEC® filtration, Safe Technology, SmartPower Management, and an integrated
automatic oiler. Models 41422, 41522 & 41622 are RCMP tested to Top Secret for CD's/DVD's.
41322 Small Office Shredder
•
•
•
•
•
•
•
•
Shred Size: 2mm x 15mm (1/12" x 9/16" ) - Type
IIIA
Feed Width: 260mm (101/4")
Sheet Capacity: 9/11
Motor: 648 Watts (.87hp)
Waste Volume: 92 L / 23 Gallons
Dimensions, mm: 864 H x 540 W x 432 D
Dimensions, inches: 341/4 H x 211/2 W x 171/8 D
Will shred paper clips, staples, and credit cards
41522 Small Department Shredder
•
•
•
•
•
•
•
•
Shred Size: 2mm x 15mm (1/12" x 9/16") - Type IIIA
Feed Width: 310mm (12")
Sheet Capacity: 11/13
Motor: 900 Watts (1.2hp)
Waste Volume: 152 L / 38 Gallons
Dimensions, mm: 876 H x 737 W x 508 D
Dimensions, inches: 341/2 H x 29 W x 20 D
Shreds paper clips, staples, credit cards, CD's, & DVD's
41422 Office Shredder
•
•
•
•
•
•
•
•
Shred Size: 2mm x 15mm (1/12" x 9/16") - Type IIIA
Feed Width: 260mm (101/4") Feed Width
Sheet Capacity: 12/14
Motor: 900 Watts (1.2hp)
Waste Volume: 120 L / 30 Gallons
Dimensions, mm: 914 H x 533 W x 432 D
Dimensions, inches: 363/4 H x 211/2 W x 171/2D
Shred paper clips, staples, credit cards, CD's and
DVD's
41622 Department Shredder
•
•
•
•
•
•
•
•
Shred Size: 2mm x 15mm (1/12" x 9/16") - Type IIIA
Feed Width: 405mm (16")
Sheet Capacity: 15/19
Motor: 1640 Watts (2.2hp)
Waste Volume: 180 L / 45 Gallons
Dimensions, mm: 965 H x 737 W x 508 D
Dimensions, inches: 38 H x 29 W x 20 D
Shreds paper clips, staples, credit cards, CD's, &
DVD's
DAHLE Shredder Accessories
Dahle Shredder Supplies & Accessories are specifically designed for Dahle shredders. By using the following products you
are guaranteed to achieve optimal performance and greatly prolong the life of your shredder.
Filters
The DAHLE CleanTEC® is the World's only
shredder with a fine dust filtration system.
The CleanTEC® filter permanently traps up to
98% of the fine dust, and provides a cleaner,
healthier work environment.
Item
Number
20710
For CleanTEC® Shredder Models
Quantity
All DAHLE CleanTEC Shredders
1/box
Shred Bags
Specifically designed to fit your Dahle
shredder, these 1.5 mil thick shred bags
feature gusseted sides to allow for greater
volume of waste material.
Item
Professional and CleanTEC®
Number
Shredder Models
20725 (705) 403xx, 413xx, 404xx, 414xx, 504xx
20726 (706) 405xx, 415xx, 406xx, 416xx
Quantity
100/box
100/box
Shredder Oil
Formulated for Dahle shredders, this oil
offers high cling value and low dust retention. Proper oiling guidelines for your Dahle
shredder and an MSDS is provided for your
convenience.
Item
Number
20740
20741
For All Shredder Models
Quantity
All Shredder Models
All Shredder Models
6 - 355 ml bottles
4 - 3.78 L bottles
Shred Samples
Shred Sample Size - 1mm x 4.7mm
Cross Cut Type II (Level 6)
Shred Sample Size - 0.8mm x 12mm
(1/32" x 7/16") Cross Cut Type II
Shred Sample Size 2mm x 15mm
(1/12" x 9/16") Cross Cut Type IIIA
Shred Sample Size 3.9mm x 40mm
(1/8" x 1 9/16") Cross Cut Type IIIB
The Dahle
ADVANTAGE
11
®
DAHLE Shredders
Standard Features
2
10
1
All Steel Frame: Keeps the cutting cylinders
2
Solid Cutting Head: A solid block of German
Steel is milled to create each cutting cylinder.
3
Door Open Interlock: Prevents the shredder
4
Thermally Protected Motor: Prevents the
5
Rubber Shock Mounts: Provides a barrier
6
Shred Bag: Features gusseted sides to expand
7
Wooden Cabinet w/Swivel Casters:
8
SmartPower Energy Management: Reduces
power consumption when idle, and eliminates
power use after 30 minutes of inactivity.
9
Chain Driven: Provides slip-free power to the
12
1
9
3
4
13
8
in perfect alignment for optimal performance.
from operating with the door open. This safety
feature is found on all models.
motor from overheating during extended use.
between the cutting head and cabinet to isolate noise
and reduce vibration.
to the shredders maximum internal capacity.
Attractive cabinet blends in with any decor and
the swivel casters allow for easy movability.
cutting mechanism for maximum throughput.
*Some components not available on certain models.
5
DAHLE CleanTEC ®
Special Features
10 Dust Filtration: Eliminates up to 98% of the
shredders fine dust particles and provides a
cleaner, healthier work environment.
7
6
11 Safe Technology: Verbal and Contact Emergency Shutdown-Simply yell "Stop" or hit the top
cover and the shredder immediately stops.
12 ESP Protection: The shredder "knows" how
much you're shredding and will not operate if
sheet capacity is exceeded.
13 EvenFlow Lubricator: This automatic oiler
provides slow, continuous lubrication across the
entire cutting mechanism.
CRD Distribution Inc.
Te l : 8 7 7 . 9 7 4 . 3 6 7 8 / F a x : 6 1 3 . 8 2 1 . 6 1 5 6 / E m a i l : i n f o @ c r d d i s t r i b u t i o n . c a / We b : w w w. d a h l e . c a
Government of Canada
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising