ManualsLib - Makes it easy to find manuals online!

ManualsLib - Makes it easy to find manuals online!
Downloaded from www.Manualslib.com manuals search engine
CONTENTS
In-Dash DVD/MP3/CD Receiver
With Motorized, Flip Out 7-Inch Widescreen
Touch Screen TFT Monitor
And Front Panel A/V Aux Input
Welcome
3
Warning
3
Note
4
Features
5
Basic Operation
6
Panel Arrangement
7
Panel Button Control Instruction
8
Outlook And Basic Function
9
Main Menu Touch Operation
11
OSD Setup
12
Adjust Mode
13
Remote Control Function
14
Loading
16
Touchscreen Display For Disc Playback
17
DVD Mode
18
RDS User Operation
20
Radio Operation
22
DVD Basic Operation
23
VCD Basic Operation
33
CD/MP3 Basic Operation
36
Music Surroundings Setting
38
EQ Setting
39
Audio Frequency/Tone
40
Other Play Mode
41
Trouble Shooting
42
Wiring Diagram
43
Specifications
44
Accessory
45
Downloaded from www.Manualslib.com manuals search engine
INSTRUCTIONS
WELCOME
Thank you for choosing Boss Audio for your A/V product.
To properly use this product, please go through this instruction manual for installation
and operation, put it in a safe place for future use!
WARNING
1. Please keep the disc slot clean, wipe it off when there is some dirt on it. You should
wipe off any dirt on the disc before you place it into the unit. If the disc is dirty and you
place it inside the unit, it will cause the unit to go into an error and will not play the
disc. Please ask professional to clean the laser.
2. Playing the radio at higher volumes for a long period of time may cause hearing
issues. You should play this unit at a moderate listen level.
3. This unit is set up by precision parts. If you open up this unit, you will void any and
all of your warranty.
4. Please do not touch LCD display with any hard object so that you prevent it from
getting scratched or damaged.
5. To avoid an accident caused by watching the LCD screen. This unit has a vehicle
lock out wire so that you will not be allowed to watch a video while driving down the
road.
6. This unit is meant for a 12V power and negative ground system from a vehicle.
NOTE:
We keep improving this product all the time. There may be some changes in it that are
not in this manual.
Downloaded from www.Manualslib.com manuals search engine
INSTRUCTIONS
INSTRUCTIONS
ACCESSORY
NOTE
● This unit can play the following disc
Accessory
MODE
ICON
CONTENT
DISC SIZE
DVD
Sound, image
12cm
VCD
Sound, image
12cm
MP3
Sound only
12cm
CD
Sound only
12cm
Note: 1. This unit is compatible with MP4/DVD/VCD1.0/2.0/3.0 version,
DVD, CD-R, CD-RW, MP3, WMA, JPEG.
2. When playing a DVD, VCD, MP3, CD disc the display will auto
identify the disc and show corresponding word.
When appears
on the display, that means that there is no function, please choose
another mode.
Downloaded from www.Manualslib.com manuals search engine
Quantity
User Manual
1PC
Wire
1PC
USB Cable
1PC
Keys
2PCS
Install metal bar
1PC
Remote controller
1PC
Warranty card
2PCS
INSTRUCTIONS
INSTRUCTIONS
SPECIFICATIONS:
FEATURES
Power supply
DC 12V
Power range
10.8-16.0V DC
Max operate current
10A
Dimensions
155X182X53MM
Negative ground
Ground system
Amp Rating
85 Watts x 4 Channels
FM tuner
European frequency range
USA frequency range
Signal/Noisse ratio
Stereo separation
Search station volt
Distortion rate
87.5-108MHz
87.5-107.9MHz
55dB
30dB
20-30dBuv
1.5%
AM tuner
European frequency range
522-1620KHz
USA frequency range
Limit noise sensitivity
530-1710KHz
32dB
DVD PLAYER
Signal/Noise ratio
Frequency response
Downloaded from www.Manualslib.com manuals search engine
70dB
20Hz-20KHz
DVD PLAYER
1. MPEG-4 Decoder Technology
2. Compatible with MP4 (AVI/5.X), DVD (DVD-R/DVD-RW), VCD,
SVCD, CD-RW, WMA, MP3, JPG
3. Supporting Multiple Subtitles, Angles, Languages
4. Child lock function
5. 4-Channel Audio Output
6. Pause, Play, Up/Down, Stop, Zoom, PBC Function
RADIO
1. AM/FM Radio Tuner
2. 30 Radio Preset Stations (18FM, 12AM)
LCD DISPLAY
1. 7” - 16:9 TFT LCD Display
2. Touchscreen
INSTRUCTIONS
INSTRUCTIONS
WIRING DIAGRAM
BASIC OPERATION
1. SOURCE ON/OFF
Press SRC button on panel or SOURCE button on remote control quickly to power on.
Press SRC button on panel or SOURCE button on remote control longer to power off.
2. PLAYING SOURCE CHOOSE
Press SOURCE button on remote control, unit will switch sources in the following
sequence: RADIO → DVD → AUX
This player is equipped with ISO standard connector, please follow below instruction:
●
Red - ACC ON (+12V)
●
Grey/Grey black - Right front speaker (+/-)
●
Yellow – 12 V Constant
●
White/White black - Left front speaker (+-)
●
Black – Ground wire
●
Purple/Purple black - Right rear speaker (+/-)
●
Blue - Power Antenna / Remote Amp Turn On
●
Green/Green black - Left rear speaker (+/-)
●
Orange – Back-Up Camera Trigger (+)
●
Pink – Parking Brake (-)
3. MUTE CONTROL
Press MUTE button on panel or MUTE button on remote control shortly to turn off
sound output, press again to back to sound output.
4. VOLUME ADJUSTMENT
1) Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch
button on display to adjust volume level.
2) The volume setting on this unit is 0 - 39.
BASS, TREBLE, BALANCE & FADER ADJUSTING (SELECT)
Press SEL button on remote control to choose your desired Bass, Treble, Balance &
Fader level:
VOL
BAS
TRE
L/R
F/R
NOTE:
1) DVD playing mode, MBP & User will be automatically activated.
2) After 5 seconds you choose desired mode, do not adjust volume button. The mode will
automatically take you back to status before adjustment.
5. RESET
1) If unit is not working correctly, you should press the RES button. This will reset the
radio and should start working correctly afterwards.
2) After reset, all settings will resume back to the factory default settings.
Downloaded from www.Manualslib.com manuals search engine
Note:
The “PARKING BRAKE” wire must be connected to the parking brake system
of your car. When the parking brake is engages, the LCD will be allowed to view
your video. If not, the screen will produce an image saying, “PARKING BRAKE”.
This is a safety feature designed for the driver not to watch a video while driving.
The video output on this unit will not be affected by this.
INSTRUCTIONS
INSTRUCTIONS
TROUBLE SHOOTING
PROBLEM
PANEL ARRANGEMENT
CAUSE
SOLUTION
Check whether power fuse
blew or not
Change fuse same as the old one
Some factor cause MPU wrong
operation
Press RESET button on the panel by pen
point, then, power on
After ignition
switch off, setting
information all lose
Wrong connection between
ignition line ACC and
Constant 12 Volt wire
Change the wiring around
Remote control no
function
No enough power supply
from battery
Change battery in remote control
Poor performance
of radio station
Improper length of antenna,
poor connection of antenna
grounding
Check whether antenna is connected or not,
or poor connection
Can not load disc
The disc will not go in all
the way
Remove the 2 screws on top of the radio
Disc is scratched
Change new disc
Put wrong side of disc into unit
Slot in the disc with sign side up
Can not power on
Can not play disc
Lens has dirty
Clean lens by lens clean disc
Can not switch
language/subtitle
There is only one language/
subtitle in disc
If disc is not with multi-language/subtitle, it
cannot switch language/subtitle
No image
Video line between unit and
TV is not properly connected
Reconnect lines
Downloaded from www.Manualslib.com manuals search engine
INSTRUCTIONS
INSTRUCTIONS
PANEL BUTTON CONTROL INSTRUCTION
OTHER PLAY MODE
AUX IN:
1.
SRC On/Off / Function MODE button
2.
Disc out button
3.
BAND/SYS /P.N button
4.
AMS Program Preset/Play Repeat button
5.
Radio station selection/Previous song
6.
Radio station selection/Next song
7.
Pause button
8.
Release button
9.
SD socket
AUX IN OPERATION
1) Press “Source” button on remote control or touch “AUX” on the touch screen, to
switch to AUX mode.
2) This will allow you to listen and or watch any source that you have plugged into this
section of the radio.
3) This unit has 1 - Video RCA input & 1 pair of Audio RCA’s for this feature.
CCD (Back-Up Camera)
10. A/V AUX External Input
11.
USB socket
12. Reset button
13. LCD Display window
14. Disc load slot
15. Remote Controller Receiving Window
16. (VOL/SEL) Volume adjustment mode
17. PIC Color Selection button
18. UP Adjustment(TFT Screen)
19. DN Adjustment(TFT Screen)
20. MENU button
21. TFT Display Screen Extend/Retreat
22. MUTE / TFT on/off button
Downloaded from www.Manualslib.com manuals search engine
1) If there is a back-up camera installed onto your car, you will need to connect it to
the CCD video input.
2) When you are backing up the car there you will see this image
on your screen.
3) You can set CCD image according to your car's own position in general setting mode.
INSTRUCTIONS
INSTRUCTIONS
AUDIO FREQUENCY
OUTLOOK AND BASIC FUNCTION
1. Power On/Off / Function MODE button
Press this button for a short moment to turn on power, and long press it to turn off power.
Every button-press to switch audio source mode.
2. Disc Out button
Press this button can eject the disc.
3. BAND/SYS /P.N
In radio mode, press this button to switch band, every time to choose band, the sequence
is as follows:
FM1 → FM2 → FM3 → AM1 → AM2
In playing state, press this button to switch video system, AUTO, NTSC, PAL.
This function shows that the effect of standard audio output.
4. AMS Program preset/Play Repeat button
In radio mode, press this button for a short moment to start scanning preset programs.
In PLAY mode, press it to repeat playing a single song, and press it again to turn off
this function.
5. Radio station selection/Previous song
At radio state, short press this button to manual seek radio frequency to forward direction,
long press this button to automatically seek radio frequency to forward direction;
At voice playing state, short press this button to select the previous song;
.
TONE
6. Radio station selection/Next song
At radio state, short press this button to manual seek radio frequency to backward direction,
Long press this button to automatically seek radio frequency to backward direction;
At voice playing state, short press this button to select the next song;
7. Pause button
In playing state, press this button to execute play/pause.
8. Release button
Press this button can take off the control panel.
9. SD socket
This is a high-spees transmission interface, which can read high-capacity date in MP3
or MP4 format.
Note: You can change the timbre of the sound in DVD mode. We suggest keep it in the
original place.
10. A/V AUX External Input
External connection for A/V input.
11. USB socket
Connect the USB memory to this socket, and the unit can play music format files
supported by this unit in the USB memory.
12. Reset button
Press this button can back to default mode.
40
Downloaded from www.Manualslib.com manuals search engine
INSTRUCTIONS
13. LCD Display Window
Under radio mode, channel and frequency are displayed; Under play mode, the
directory of the song and time elapsed are displayed.
INSTRUCTIONS
EQ SETTING
14. Disc load slot
Opening for disc to enter or retreat.
15. Remote Controller Receiving Window
It receives infra red signals from the remote controller which fits this device.
16. (VOL/SEL) Volume adjustment mode
Repeat pressing this button can select the VOL. BAS. TRE. FAD adjustment mode.
Then can rotate the button to adjust VOL. BAS. TRE. FAD as your likes.
17. PIC Color selection button
Short press this button to chroma setup in the following level:
Bright → Soft → Sharp → Standard → Self Set
18. UP Adjustment(TFT Screen)
After the display screen is extended, press this button to adjust the upward view angle
of the screen in 5 steps of adjusting angle.
19. DN Adjustment(TFT Screen)
After the display screen is extended, press this button to adjust the downward view
angle of the screen in 5 steps of adjusting angle.
20. MENU button
Press this button in any mode to go back to the main menu.
21. TFT Display screen extend/Retreat
Press this button to extend the TFT screen from the device or retreat it back. The
maximum angle of extension is 104 degree.
Attention: Under the disc playing mode, there is no image display at the moment of
screen extension after the button is pushed. It will become normal in 3 seconds.
22. MUTE / TFT on/off button
Press this button to shut off the sound output, re-press this button can resume the
sound output, long press this button can turn off the TFT LCD display.
Downloaded from www.Manualslib.com manuals search engine
User defined
Rock
Classic
Jazz
Standard
Pop
INSTRUCTIONS
INSTRUCTIONS
MUSIC SURROUNDINGS SETTING (PIC 7)
MAIN MENU TOUCH OPERATION (PIC 1)
OSD SET
DVD
USB/SD
RADIO
GPS
Passive
Church
Wide
Concert
Live
CDC
TV
POWER
Note: This function only is used with the remote control in CD/MP3/USB/SD mode.
Once you have one of these settings on. You will no longer have Bass & Treble
adjustments until this feature is set to off.
BLUETOOTH
AUX INPUT
* This unit without CDC/TV/GPS/BLUETOOTH function.
Downloaded from www.Manualslib.com manuals search engine
INSTRUCTIONS
INSTRUCTIONS
OSD SETUP (PIC 2)
Minute
Hour
PROG
TC
1 _ _ : _ _
TC
5 _ _ : _ _
TC
9 _ _ : _ _
TC
13 _ _ : _ _
2 _ _ : _ _
6 _ _ : _ _
10 _ _ : _ _
14 _ _ : _ _
3 _ _ : _ _
4 _ _ : _ _
7 _ _ : _ _
8 _ _ : _ _
PLAY
11 _ _ : _ _
12 _ _ : _ _
DELETE
15 _ _ : _ _
16 _ _ : _ _
Input the number of the song you want to program by the remote control, program the
first song, input your desired song, for example, the sixth song, and press number button
6 on the remote control. Program the second song, press
button move the cursor to
2
. Input your desired song, for example, the ninth song, press number button 9 on
the remote control. Press
button to program play.
Back to the normal mode, press the ST/PROG button, then press
button.
Note: This function can only be worked by the remote control.
Exit
11. MP3 Program Play
In MP3 mode, you can set the sequence of playing by the program function, the
operation is as follows:
When MP3 is playing, press ST/PROG button, then the display shows:
Radio frequency setting
Back-up Camera
left/right selection
RDS on/off optional
10. CD Program Play
In CD mode, you can set the sequence of playing by the program function, the operation
is as follows:
When CD is playing, press ST/PROG button, then the display shows:
Note: Touch corresponding function,
it will display in yellow words reminding,
and blue back ground reminding.
Time setting
Note: There are 3 buttons automatically changed according to your setting change in
radio state when you activate or exit RDS; Changes are as following:
PTY
LOUD; TA
EQ; AF
ST
TIME DISPLAY AND ADJUST
Time display: Touch main menu into adjust mode, press time setup button, the
corresponding function will be display in yellow words.
(1)Press “+” on hour to add hour, press “-” to reduce hour;
(2)Press “+” on minute to add minute, press “-” to reduce minute.
NOTE: Touch the correspondence function, will be display in green background.
The unit include two times system: Europe time (24 hour setup), America time (12
hour setup), when show the AM mark it indicate morning time, when appear the PM
mark, it show the time of afternoon.
Remark: This unit is with RDS function, it will automatically adjust the time when you
activate RDS function or have received RDS radio channels. At no received RDS radio
channels or AM state, you should adjust the time.
Downloaded from www.Manualslib.com manuals search engine
PROG
TC
1 _ _ : _ _
TC
5 _ _ : _ _
TC
9 _ _ : _ _
TC
13 _ _ : _ _
2 _ _ : _ _
6 _ _ : _ _
10 _ _ : _ _
14 _ _ : _ _
3 _ _ : _ _
4 _ _ : _ _
7 _ _ : _ _
8 _ _ : _ _
PLAY
11 _ _ : _ _
12 _ _ : _ _
DELETE
15 _ _ : _ _
16 _ _ : _ _
Then, input desired song by remote control.
For example: Program the first song, input 01, press
button move the cursor to the
second lattice, input desired song, for example the third song. Program the second song,
press
button, work with
button, move the cursor to 2
. Input 01, press button
move the cursor to the second lattice, input desired song, for example, the sixth song
(press 6). Press
button to program play.
Back to the normal mode, press the ST/PROG button and then press
button.
Note: This function can only be worked by the remote control.
INSTRUCTIONS
INSTRUCTIONS
ADJUST MODE (PIC 3)
CD/MP3 BASIC OPERATION (Look at Picture #4)
Slide in CD/MP3 disc, unit will play it automatically. If disc is in slot, press DVD touch
button on main menu can to play.
1. Repeat Play
In CD/MP3 mode, press AMS/RPT button on remote control, to startup following, repeat
CD disc: Single song repeat→ Repeat play off.
MP3 disc: Single song repeat→Directory repeat→ Repeat play off.
2. Fast Forward/Fast Rewind
Press SEEK + / SEEK - button on remote control, or
speed forward or backward playing.
Note: Hold above button a bit longer to operate.
/
Volume: press
/
button to adjust volume
Back main menu
Bass: press / button to
adjust bass level
Adjust front and
rear speaker
touch button on display to
3. Previous/Next Song Play
In playing mode, press SEEK + / SEEK - on remote control, or
display to choose previous/next song.
4. Pause Play
In play mode, press
button on remote control, or
Press again to go back to normal play.
Sharp: press / button to adjust
sharp sound high and low
/
touch button on
Adjust left and
right speaker
button on display to pause.
5. Stop Play
In play mode:
1) Press
button on remote control to enter the pause mode, the position will be stored
in unit. At that time, press
button on remote control or touch button on display to
resume playing at the stored position.
2) Press
button on remote control twice to enter into stop mode, here, press
button on remote control or touch button on display, unit will play from the first song.
6. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
7. Randomly Play
In CD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
8. EQ Mode
1) This function can only be worked by remote control.
2) When playing CD/MP3, press the “ZOOM” button on the remote control, you can
choose the sound mode.
3) When enter this function, press the button / / / to move the course to select
sound mode which in the system menu, after your selection position will show red color
to indicate the confirmation.
9. OPEN
Press EJECT button on pedestal to eject disc.
Downloaded from www.Manualslib.com manuals search engine
Exit setup
EQ mode
From Rock POP
Off
Resume standard video
Classic
Choose the best listening
place; this function will
make you enjoy the best
comfortable sound effects
Loud: press once off LOUD
on, press again to turn off
DBAS on/off: press
once to DBAS on, press
again to DBAS off
INSTRUCTIONS
INSTRUCTIONS
REMOTE CONTROL FUNCTION
4. SOURCE Button
Press this button to choose audio sources.
5. EQ Button
Press this button to choose POP, ROCK, EQ off.
6. SEEK + (
) / SEEK - (
) Button
Press this button to manual turning, speed
or quick back, previous song and next song.
7. VOL + (
) / VOL - (
)
Press this button to increase or decrease
volume level.
8. SEL Button
Press this button to choose sound feature.
9. LOUD Button
Press this button to startup LOUD function.
10. BAND - P/N Button
In radio mode, press this button to choose band.
In VCD, DVD mode, press this button to choose
AUTO, PAL or NTSC system.
11. LOC/RDM Button
In radio mode, press this button to switch
between local and direction. In VCD, CD mode,
press this key to randomly play.
12. STOP Button
Press this button to stop playing.
1. POWER
13. PLAY/PAUSE Button
Press once to switch on, press again to Press this button to switch between play and
switch off.
pause. In stop mode, press this button to play.
2. MUTE Button
Press once to turn off audio output,
press again to resume volume level.
3. DSP
Press this button to show the time.
14. ST/ PROG Button
In radio mode, press this button to choose
stereo or mono station. In audio mode, it
can help STOP button to programmed play.
Downloaded from www.Manualslib.com manuals search engine
15. PBC (MENU) Play
In VCD mode, press this button then play the PBC and display will show whole menu
in disc, work with number button to choose song. When you are playing either song
of the PBC, and you want to stop to select another song, press the button to turn off.
Note:
1) This function can be worked by the control.
2) PBC is suitable for the SVCD and VCD 2.0 disc.
3) In PBC mode, you can not press number button only to choose song.
16. VCD Program Playing
In VCD mode, you can set playing sequence of songs by program play function.
The program playing operation steps are as follows:
In VCD mode, press ST/PTOG button, display will show:
PROG
TC
1 _ _ : _ _
TC
5 _ _ : _ _
TC
9 _ _ : _ _
TC
13 _ _ : _ _
2 _ _ : _ _
6 _ _ : _ _
10 _ _ : _ _
14 _ _ : _ _
3 _ _ : _ _
4 _ _ : _ _
7 _ _ : _ _
8 _ _ : _ _
PLAY
11 _ _ : _ _
12 _ _ : _ _
DELETE
15 _ _ : _ _
16 _ _ : _ _
Input the songs which you want to programmed by the number buttons on remote control.
For example: Program the first song, input your desires song, for example, the fourth song,
and press number button 4 on the remote control. Program the second song, press
button move the cursor to 2
. Input your desired song, for example, the eighth song,
press number button 8 on the remote control. Press
button to program play. Back to
the normal mode, press the ST/PROG button, then press
button.
Note: This function can only be worked by the remote control.
INSTRUCTIONS
8. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
9. Number Buttons
In VCD mode, press 0-9 number button to input song. For example, you want to choose
13th song, press 10+ button, and then press 3 button once to play 13th song.
Note: This function can only be worked by the remote control.
10. Repeat Play
In playing mode, press AMS/RPT button on remote control, to startup following, repeat
function. Single song repeat→ Repeat play off.
Note:
1) When playing VCD disc, if PBC is on, no repeat function.
2) After unit is power off or mode is switched to other playing mode except VCD mode.
if you switch back to VCD mode, repeat playing will be cancelled.
11. Randomly Play
In VCD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
Note: When VCD disc, if PBC is on, RDM will not work.
INSTRUCTIONS
15. 0 - 10 + Button
Press this button to choose desired song,
section, preset stations.
* Decimal numbers, for example the 19th
song, press 1,9 button;
* Centesimal numbers, for example, the
120th song, press 1,2,0 button.
16. AMS / RPT Button
In radio mode, press this button to browse
stored stations. In audio mode, press this
button to play repeatedly.
17. TITLE Button
In DVD mode, press this button to play
back to the top menu of disc.
18. AUDIO Button
In DVD mode, press this button to switch
language of dialogue. In VCD mode, press
this button to choose left track, right track,
and stereo.
12. Scan Play
In playing mode, it will play each song for 15 seconds to scan for your desired song.
1) Press 3/INT touch button on display to scan and play from the first song.
2) When you hear your desired song, press this button to cancel scan playing.
It will go back to normal playing.
19. SET Playing Time
In DVD mode, press this button, you can
define playing time.
13. Switch Track
In VCD mode, press AUDIO button on remote control to switch track as following
sequence:
Stereo
Right
Left
20. SUBTITLE Button
In DVD mode, press this button to switch
language of subtitle.
14. OPEN
Press EJECT button on pedestal to eject disc.
21. PBC Button
In VCD mode, press this button to display
all song menus, work with number button
to choose songs.
25. SETUP Button
In audio mode, press this button to choose
different set items.
26. OSD Display
Press this button to display the title chapter
and the left time.
27. ZOOM Button
In DVD/VCD mode, press this button to
ZOOM in. In CD/MP3/USB/SD mode,
press this button to choose EQ.
28. MENU Button
Press button to back to the main menu.
BATTERY CHANGE
When control distance of remote control
becomes shorter or no function, please
change battery. Please confirm polarity
before change.
One hand press stopper, then pull out battery.
22. UP, DOWN, LEFT, RIGHT, ENTER
Button
In DVD mode, press this button to move
cursor up, down, left, right to choose item
in menu. Press the enter button to confirm
choice.
23. SLOW Button
In audio mode, press this button to slow
backward and slow forward.
Downloaded from www.Manualslib.com manuals search engine
24. ANGLE Button
In DVD mode, press this button to change
play angle.
Put battery into controller.
Insert battery holder into controller.
INSTRUCTIONS
LOADING
INSTRUCTIONS
VCD BASIC OPERATION (Look at picture #4)
Slide in the VCD disc, it will play it automatically. If the disc is in slot, press DVD touch
button on main menu can to play.
1. Pause Play
In playing mode, press
button on remote control, or
Press again to back to normal play.
on display to pause.
2. Stop Play
In playing mode, 1) Press
button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press
button on remote control or touch
button on display to resume playing at the stored position.
2) Press
button on remote control twice to enter into stop mode, here, press
button
on remote control or touch button on display, unit will play from the first song.
3. Fast Forward/Rewind Function
In playing mode, press SEEK + button on remote control, or
touch button on display
to speed play.
When you need quick back, press SEEK - button on remote control, or
touch button
on display to quick back play.
Note: Hold above button a bit longer to operate.
This white bar shows the rate
of process of loading a disc.
Note: When loading a disc, touch screen function can not be used.
4. Previous/Next Song Play
In playing mode, press SEEK + / SEEK - on remote control, or
display to choose previous/next song.
/
touch button on
5. Switch System
In playing mode, short press the BAND/P/N button on remote control, to select PAL,
AUTO, NTSC TV system.
Note: This function can only be worked by the remote control.
6. Slow Play
Press SLOW button on remote control to slow play. The level of slow playing is as follows.
Sequence is : SLOW 1/2
SLOW 1/3
SLOW 1/4
SLOW 1/5
PLAY
SLOW 1/7
SLOW 1/6
Note: This function can only be worked by the remote control.
7. Zoom In / Zoom Out
Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are
as follows:
ZOOM IN 1/2
ZOOM IN 2
ZOOM IN 3
ZOOM IN 4
ZOOM IN 1/4
ZOOM IN 1/3
ZOOM IN OFF
Note:
1. This function can only be worked by the remote control.
2. Image which is zoomed in can be moved by up/down/left/right cursor to move.
3. Image which is zoomed out cannot be moved.
Downloaded from www.Manualslib.com manuals search engine
INSTRUCTIONS
INSTRUCTIONS
TOUCHSCREEN DISPLAY FOR DISC PLAYBACK (PIC4)
DIGITAL SETUP
1. Press
or
button
2. Press
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
/
/
button, then to enter.
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
LINE OUT
RF REMOD
EXIT SETUP
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
Touch this area to
enter & exit main
menu.
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
FULL
6/8
4/8
2/8
OFF
MP3 mode, press this button so
you can move the cursor to
left/right/up/down and select the
songs which in the system menu
EXIT SETUP
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
/
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
STEREO
MONO L
MONO R
MIX MONO
DVD mode, press
this area to show
function icons
Touch option:
next song;
previous songs;
adjust monitor angles;
Pls refer to Pic 5 when touch “SET” button;
There is a yellow remind when touch any
button.
EXIT SETUP
You can select “X2→X4→X8→X16→X20→Play”
to speed up when you press this button
.
You can select “X2→X4→X8→X16→X20→Play”
to backward when you press this button
.
Downloaded from www.Manualslib.com manuals search engine
INSTRUCTIONS
INSTRUCTIONS
DVD MODE (PIC 5)
VIDEO SETUP
AUDIO SETTING ON TOUCH SCREEN
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
EXIT SETUP
VIDEO SETUP
Audio selection:
VOL → BAS → TRE → BAL → FAD
EQ mode: Touch the button
to change settings:
ROCK → POP → CLASSIC → OFF
When using this function, the position
bar will be highlighted.
Change the
listening position
Bass choosing: when
touched the button will be
yellow, touch this button
to exit, touch it again to
resume.
Loud choosing: this function is defined
open, when it is touched at the first time,
the loud function will be closed, at the
same time, yellow light disappear.
Downloaded from www.Manualslib.com manuals search engine
12
10
8
6
4
2
0
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
EXIT SETUP
8
6
4
2
0
INSTRUCTIONS
INSTRUCTIONS
VIDEO SETTING ON TOUCH SCREEN
VIDEO SETUP
1. Press
or
button
2. Press
/
VIDEO SETUP
/
/
button, then to enter.
You can choose: Brightness, Contrast, Color,
Hue, adjust the image effect according to
your sight. The blue bar will show your level.
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
EXIT SETUP
VIDEO SETUP
12
10
8
6
4
2
0
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
EXIT SETUP
12
10
8
6
4
2
0
Video mode: When using this
function, the position will be darker
on the screen.
VIDEO SETUP
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
EXIT SETUP
Downloaded from www.Manualslib.com manuals search engine
+6
+4
+2
0
-2
-4
-6
Image mode: You can choose the area in the
broken line on the panel, standard, defined,
soft, according what you need to choose,
the blue back light will disappear.
INSTRUCTIONS
INSTRUCTIONS
RDS USER OPERATION (PIC 6)
LANGUAGE SETUP
Press PTY, when PTY is on, it means there
is strong RDS signals output.
Press this button to choose radio
channels' name, please refer to details
user manual.
Short press on this button to
decrease radio frequency;
longer press on this button to
seek radio channels frequency
decreased direction.
Press this button to close sound
output, re-press this button to
resume sound.
Short press on this button to
increase radio frequency;
longer press on this button to
seek radio channels frequency
increased direction.
Touch this area to
enter & exit main
menu.
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
EXIT SETUP
AUDIO SETUP
1. Press
or
button
2. Press
AUDIO SETUP
Press this button to
adjust angles of the
monitor.
AUDIO OUT
KEY
In the radio state, press “APS” button,
it will automatically seek radio
channels in the whole band and preset
the strongest radio channels.
/
/
/
button, then to enter.
AUDIO SETUP
AUDIO OUT
KEY
EXIT SETUP
Press “SEL” to adjust other
functions, please refer to pic 3.
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
EXIT SETUP
Press this button each time, it
will automatically execute the
following operation in an
order of FM1 → FM2 → FM3 →
AM1 → AM2
Press TA, when TA is on, it
means the unit is automatically
track RDS radio channels.
AUDIO SETUP
AUDIO OUT
KEY
AUDIO SETUP
AUDIO OUT
KEY
For details of RDS operation, please refer to other instruction
EXIT SETUP
Downloaded from www.Manualslib.com manuals search engine
EXIT SETUP
#
+4
+2
0
-2
-4
INSTRUCTIONS
INSTRUCTIONS
LANGUAGE SETUP
1. Press
or
button
2. Press
LANGUAGE SETUP
/
/
/
button, then to enter.
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
EXIT SETUP
LANGUAGE SETUP
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
EXIT SETUP
LANGUAGE SETUP
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
RDS
1. EON (RDS Mark)
Indicate main unit is on auto tracking RDS mode.
2. AF (RDS Auto Tracking Mark)
Indicate radio is auto tracking RDS channel.
3. TA (RDS Signal Increasing Output)
Indicate RDS channel have signal increasing output.
4. TP (RDS Channel Stereo Mark)
Indicate RDS channel is on stereo playing mode.
5. POP.M (RDS Channel Mark)
Indicate RDS channel name.
1. RDS Tracking System
Press AF button in FM mode, and then press
/
last 2 minutes, RDS will auto search
channel up and down, it will stop searching when RDS channel be founded, but “AF”
will keep remaining on the screen and waits for the next traffic emergency report.
2. RDS Tracking on Playing Mode
In playing mode, “AF” tracking system keeps on opening and waits for traffic emergency
report.
1) PTY: RDS button, press once will show music mode POP, press 1-6 function
memory button, every group have 2 channel.
POP M
ROCK M
EASY M
OTHER M
LIGHT M
CLASSICS M
JAZZ
NATION
COUNTRY
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
EXIT SETUP
Downloaded from www.Manualslib.com manuals search engine
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
2) Press PTY button twice and then press 1-6 function memory button, every
button have 3 channel.
INFORMATION
NEWS
AFFAIRS
SPORT
DRAMA
EDUCATION
SCIENCE
CULTURE
CHILDREN
RELIGION
PHONING
SOCIETT
TRAVEL
Note: RDS channel in broken line is available.
AF: RDS auto search button, in radio mode also can press this button shortly auto
tracking RDS channel, press this button shortly can cancel RDS function.
TA: In RDS mode, press this button can output TA signal, and check RDS channel is
exist or not, if no RDS signal TFT will show “NO.TA.TP”.
INSTRUCTIONS
INSTRUCTIONS
RADIO OPERATION (Please look at picture #6)
SYSTEM SETUP
1. Band Selection
In radio mode, press BAND button, BAND/P/N button on remote control, or touch position
on screen every time to choose band, the sequence is as follows:
FM2
FM1
AM2
FM3
AM1
2. Adjust Frequency
Manually Adjust Frequency:
Press SEEK + button on remote control, or
touch button on display shortly every time,
frequency will increase one step by one step till you get desired frequency. Press SEEK button on remote control, or
touch button on display shortly every time, frequency will
ecrease on step by step till you get desired frequency.
Search Station:
Press SEEK + / SEEK - button on remote control, or
/
touch button on display
shortly every time to search station in up/down direction. When get one station, it will
auto stop searching.
3. Browse / Auto Search and Store Station
1) In radio mode, press AMS/RPT button on remote control, or APS button on display
shortly to browse preset station on 1-6;
2) In radio mode, press AMS/RPT button on remote control, or APS button on display
longer to auto search in whole band from present frequency and store 6 most strong
frequency on 1-6;
3) This unit has FM1, FM2, FM3, AM1, AM2 Bands. Each band can store 6 stations,
so a total 30 preset stations.
Note: After preset station, unit will cancel the former preset stations.
4. Mono/Stereo Selection
In radio mode, press ST/PTOG button on remote control or ST touch position on display
to choose mono/stereo program.
Note: In radio mode, start up the stereo function automatic, touch the ST button again on
the display, the TFT display will show the ST OFF & MOMO mark, that is to turn off the
stereo. When the right under foot appear the MONO mark, it show the MONO on.
5. Manual Preset and Store Station
In radio mode, press 1-6 button on remote control, or 1-6 position on display longer to
store preset frequency into preset channel. For example, the present frequency is
89.8MHz, press 2 button longer, then 89.8MHz frequency is stored in 2 channel.
Downloaded from www.Manualslib.com manuals search engine
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
Note:
1. After input code “0000” press ENTER button to
turn on child lock;
2. Move cursor to level item, choose desired level;
3. Only child lock is in can you choose.
SYSTEM SETUP
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
SYSTEM SETUP
1. KID SAFE
2. G
3. PG
4. PG 13
5. PG-R
6. R
7. NC-17
8. ADULT
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
RESTORE
INSTRUCTIONS
INSTRUCTIONS
SYSTEM SETUP
1. Press
or
button
DVD BASIC OPERATION (Please link with touch operation at pic 4)
2. Press
SYSTEM SETUP
/
/
/
button, then to enter.
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
SYSTEM SETUP
NTSC
PAL
AUTO
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
SYSTEM SETUP
S-VIDEO
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
EXIT SETUP
on the display to pause.
3. Fast Forward/Fast Backward Play
In playing mode, press SEEK + button on remote control, or
touch button on display
to speed play.
When you need quick back, press SEEK - button on remote control, or
touch button
on display to quick back play.
Note: Hold above button a bit longer to operate.
4. Previous/Next Song Play
In playing mode, press SEEK + / SEEK - on remote control, or
display to choose previous/next song.
/
touch button on
5. Switch System
In playing mode, short press the BAND/P/N button on remote control, to select PAL,
AUTO, NTSC TV system.
Note: This function can only be worked by the remote control.
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
1. Pause Play
In playing mode, press
button on remote control, or
Press again to go back to normal play.
2. Stop Play
In playing mode, 1) Press
button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press
button on remote control or touch
button on display to resume playing at the stored position.
2) Press
button on remote control twice to enter into stop mode, here, press
button on remote control or touch button on display, unit will play from the first song.
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
Slide in DVD disc, unit will play it automatically. If disc is in slot, press DVD touch button
on main menu to play disc.
6. Slow Play
Press SLOW button on remote control to slow play. The level of slow playing is as follows.
Sequence is : SLOW 1/2
SLOW 1/3
SLOW 1/4
SLOW 1/5
PLAY
4:3 PS
4:3 LB
16:9
SLOW 1/7
SLOW 1/6
Note: This function can only be worked by the remote control.
7. Zoom In/Zoom Out
Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are
as follows:
ZOOM IN 1/2
ZOOM IN 2
ZOOM IN 3
ZOOM IN 4
ZOOM IN 1/4
ZOOM IN 1/3
ZOOM IN OFF
Note:
1. This function can only be worked by the remote control.
2. Image which is zoomed in can be moved by up/down/left/right cursor to move.
3. Image which is zoomed out cannot be moved.
Downloaded from www.Manualslib.com manuals search engine
INSTRUCTIONS
INSTRUCTIONS
8. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
9. Repeatedly Play
In play mode, press AMS/RPT button on remote control to start up follow repeat function.
Repeat (chapter)
Repeat (section)
14. MENU Select
In playing mode, press PBC button on remote control to back to the menu, display will
show chapter and section in disc. Work with
/ button on remote control or touch
button on display to choose your desired song. Press
button / ENTER button to play.
Note: This function can only be worked by the remote control.
OPEN: Press EJECT button on pedestal to eject disc.
Repeat (off)
10. Angle Switch
If the DVD disc is recorded with multi-angles, you can press the ANGLE button to switch
the angle during playing.
The sequence is as follow:
ANGLE 1 → ANGLE 2 → ANGLE 3
Note:
1. It just can be worked by the remote control.
2. It is only for the DVD disc which has multi-angle.
3. If there is a
sign on the cover of the DVD disc. The number in the sign means
how many angles the disc has.
4. You can not switch the angle when slow playing.
11.Multi-Audio
There are different languages of dialogue and audio systems in DVD disc.
If the DVD disc is recorded with multi-audio, you can switch the language of dialogue and
the audio systems when playing.
Press the AUDIO button repeatedly to change the language of dialogue.
Note
1. It just can be worked by the remote control.
2. It is only for the DVD disc which has multi-language.
3. If there is a
sign on the cover of the DVD disc,
means that it was recorded
by multi-language/audio system.
4. In VCD mode, press the AUDIO button to select the L/R or STEREO track.
12.Multi-Subtitle
If the DVD disc is recorded with multi-subtitle, you can switch the languages of subtitle.
Press the sub-t button repeatedly to change the language.
Note:
1. It just can be worked by the remote control.
2. It only for the DVD disc which is recorded with multi-wubtitle.
3. If there is a
sign on the cover of the DVD disc
means theat it has several
subtitle.
13. Title Select
In DVD mode, press TITLE button to back to the title menu. Display shows all the titles of
the disc. You can select the chapter you want by the cursor, press play button to play the
chapter.
Note: It just can be worked by the remote control.
Downloaded from www.Manualslib.com manuals search engine
15. Program Play
In DVD mode, you can set the sequence of playing by the program function, the operation
is as follow:
PROG
TC
1 0 1 : 0 3
2 0 1 : 0 6
3 _ _ : _ _
4 _ _ : _ _
TC
5 _ _ : _ _
TC
9 _ _ : _ _
TC
13 _ _ : _ _
6 _ _ : _ _
10 _ _ : _ _
14 _ _ : _ _
7 _ _ : _ _
8 _ _ : _ _
PLAY
11 _ _ : _ _
12 _ _ : _ _
DELETE
15 _ _ : _ _
16 _ _ : _ _
When DVD is playing, press ST / PROG button, then display shows:
For example, program the first song, input 01, press
button move the cursor to the
second lattice, input desired song, for example, the third song. Program the second song,
press button, move the cursor to 2
. input 01, press button move the cursor to
the second lattice, input desired song, for example, the 6th song (press 6). Press button
to program play. Back to the normal mode, press the ST/PROG button, then press
button.
Note: This function can only be worked by the remote control.
16. Digital Album
Play the disc contains JPEG pictures, read the picture menu first.
1. Press
button on remote control, the pictures will be browsed automatically. (It also
can be worked to press number 6 button on the unit.)
2. Press ENTER button on the remote control, it can be manual browsed by SEEK + and
SEEK -.
3. ZOOM in picture function: During auto browsing, press pause button stop the screen,
press ZOOM button to zoom in or zoom out the picture. During manual browsing, you
can press ZOOM button to zoom in or zoom out picture directly.
4.Under zoom in picture, you can move the picture by
.
Note: You can not move picture in normal mode and zoom out mode.
17. Setup
Press SETUP button, display will show the system setup menu and the submenu, select
the item you want by
, after selecting the proper item, press
/ / / to press
ENTER to confirm.
Note:
1. It just can be worked by the remote control.
2. Some function setting maybe different because of the different model or disc.
3. If the selected language is not recorded in the disc, then unit will show the appointed
language,
4. About the “SETUP”, please read the follow.
Press “SETUP” on the remote control, it will appear the following touch menu:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising