USER MANUAL 18" Class Slim HD Widescreen Monitor L185V TABLE OF CONTENTS 1 Getting Started Package Includes Installation 2 Front Panel / Back Panel Front Panel Back Panel 3 On Screen Display 4 Technical Specs 5 Care & Maintenance 6 Troubleshooting No Power Power on but no screen image Wrong or Abnormal Colors 7 Safety info & FCC warning GETTING STARTED 1 Package Includes • AC Power Cord • VGA Cable • Quick Start Guide AC Power Cord VGA Cable GETTING STARTED Installation 1. Insert post into base 3. Connect Video Cable, Connect Power Cord 4. Power on Computer and Monitor 2. Slide Post into monitor slot CONTROL PANEL / BACK PANEL 2 Control Panel Menu Auto Back Panel VESA VGA AC Power ON SCREEN DISPLAY 3 Using On Screen Display (OSD) Function Display main menu Menu Exit from OSD menu Auto Auto Adjust of the screen Select the desired item when in OSD menu When not in OSD menu, directly enters COLOR VISION MODE Select the desired item when in OSD menu When not in OSD menu, directly enters CONTRAST/BRIGHTNESS + Recall both of Contrast and Brightness (when not in OSD menu) Menu + Power Lock (when not in OSD menu) Menu + OSD Lock (when not in OSD menu) Main Menu ON SCREEN DISPLAY Short Cuts Function from the button(s) Auto Image Adjust To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen To manually adjust the CONTRAST, BRIGHTNESS, DCR and ECO of screen image CONTRAST: To adjust the foreground white level of screen image increase contrast Contrast/Brightness decrease contrast BRIGHTNESS: To adjust the luminance of the video increase contrast decrease contrast DCR: To detect the distribution of the visual signals inputs, and create an optimized contrast ECO: Allows the user to change the ECO mode. Brightness adjustment will be disabled when ECO is active To select the color for improving brightness and color saturation between COOL, NORMAL, WARM, USER COLOR COOL: Adds blue to screen image for cooler white NORMAL: Adds red to screen image for warmer white and richer red Color Adjust WARM: Adds green to screen image for a darker color USER COLOR: Individual adjustments for red (R), green (G), Blue (B) 1. Press MENU button to select the desired color 2. Press Information or button to adjust selected color To display the information, regarding the current input signal coming from the graphic card in your computer. Note: See your graphic card user guide for more information about changing the resolution and refresh rate. ON SCREEN DISPLAY Short Cuts Function from the button(s) To manually adjust the H. / V. Position, Horizontal size, Fine tune, Sharpness, Aspect Ratio and Color Vision Mode. H. / V. Position: To adjust the width of the screen image. Manual Image Adjustment H. Position: move screen to the right, : move screen to the left. V. Position: move screen up, move screen down. Horizontal Size: To adjust the width of the screen image. increase the width of screen image, decrease the width of screen image Fine tune: To adjust the delay time of data and clock Press or to adjust to your preference. Sharpness: To adjust the clarity of a non-WXSGA+ Resolution (1366x768) signal with or button Aspect Ratio: To select the video mode from FULL SCREEN or 4:3 Color Vision Mode: Provides an optimum display environment depending on the contents displayed. It contains 5 user-selectable presets. • Standard is for general windows environment and monitor default setting. • Game optimized for PC game environment • Video optimized for movie and video environment • Landscape optimized for displaying outdoor scenery images. • Text optimized for text editing and viewing in a word processing environment To set up Language select, OSD Position, OSD time out and OSD background Language Select: To allow users to choose from available languages Menu Setting OSD Position: Press or button to select between horizontal and vertical OSD Position Adjustment. OSD H. Position: To horizontally adjust the OSD Position move OSD to the right, move OSD to the left OSD V. Position: To vertically adjust the OSD position. move OSD up, move OSD down. OSD time out: To automatically turn off On Screen Display (OSD) after a preset period of time. OSD background: Allows the user to turn the OSD background On or Off Memory recall To recall factory settings for Video controls. Press MENU button to select the Memory Recall menu option. TECHNICAL SPECS 4 Technical Specification LED Panel Power Management Displayable Resolution 47.0 cm (18.5”) TFT (with LED back light) Off Mode, < 0.5 W 1366 x 768 max. Vertical Frequency 60Hz max. Pixel Dimension 0.3 x 0.3 mm LED Display Color Tilt 16.7M -3°~18° (±2°) Active Display Area 409.8 mm x 230.4 mm Temperature Operating: 0°C ~ + 40°C Storage: -20°C ~ + 60°C Compliance CE Power Input Voltage AC100-240 V CARE & MAINTENANCE 5 Care • Avoid exposing your monitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare. • Put your monitor in a well ventilated area. • Do not place any heavy things on top of your monitor • Make certain your monitor is installed in a clean and moisture-free area. • Keep your monitor away from magnets, motors, transformers, speakers, and TV sets. Safety Tips • If smoke, abnormal noise or odor came out from your monitor, caution you should remove the power cord immediately and call your service center. • Never remove the rear cover of your monitor cabinet. The display unit inside contains high-voltage parts and may cause electric shock to human bodies. • Never try to repair your monitor yourself. Always call your service center or a qualified technician to fix it. TROUBLESHOOTING 6 No Power • Make sure AC power cord is securely connected to the power adapter and the power supply is firmly connected to the monitor • Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage • Make sure all signal cables are installed Power on but no screen image • Make sure the video cable supplied with the monitor is tightly secured to the video output port on back of the computer. If not, tightly secure it. • Adjust brightness Wrong or abnormal colors • If any colors (red, green, blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection • Connect the monitor to another computer SAFETY & FCC WARNING 7 Safety Precautions This monitor is manufactured and tested to ensure user’s safety. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following warnings before installation and keep this guide handy. WARNINGS • This monitor should be operated only at the correct power sources indicated on the label on the rear end of the monitor. If you’re unsure of the power supply in your residence, consult your local dealer or power company. • Do not try to repair the monitor yourself as it contains no user-serviceable parts. The monitor should only be repaired by a qualified technician. • Do not remove the monitor cabinet. There is high-voltage parts inside that may cause electric shock, even when the power cord is disconnected . • Stop using the monitor if the cabinet is damaged. Have it checked by a service technician. • Put your monitor only in a clean, dry environment. Unplug the monitor immediately if gets wet and consult your service technician. • Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto the glass screen. • Keep the monitor away from magnetic objects, motors, TV sets, and transformer. • Do not place heavy objects on the cable or power cord. • Due to safety concerns, if the VESA mounting kit is purchased separately, please make sure the mounting kit is UL-Listed, and replaceable only by service personnel. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. This monitor generates, uses, and can radiate radio frequency energy. Harmful interference to radio communication may be led as a result if it‘s not properly installed and used. However, there is no guarantee that interference will not occur in a particular installation. If this monitor does cause serious interference to radio or television reception, resetting the monitor may determine it. Moreover, users are encouraged to correct interference by doing one or more of the following: • Reorient or relocate the receiving antenna. • Move the monitor and the receiver further away from each other. • Connect the monitor into an outlet on a circuit different from that to which the receiver is connected. • Consult your local dealer or an qualified technician. FCC Warning: To assure a continued FCC compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this monitor would void the user‘s authority to operate this device. Note: If necessary, shielded interface cables and AC power cord must be used to meet the emission level limits.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project