DATASHEET MT Range of Multi-Tone Sounders and Beacons

DATASHEET MT Range of Multi-Tone Sounders and Beacons
DATASHEET
MT Range of Multi-Tone
Sounders and Beacons
Banshee
Wafer
MT
MT
MT
FlashTone
MT
FlashDome
VIMPEX
Shaping Alarm Technology
MT Range
The MT Range of Multi-Tone sounders and beacons represents
the most modern, acoustically advanced and by far the most
versatile range of conventional electronic sounders, combined
units and dedicated beacons available on the market today.
The BansheeMT, FlashToneMT and WaferMT come with 32 userselectable tones incorporating low frequencies, high
frequencies, European, American and Australian norms and
all industry-standard frequency patterns. Tested and approved
to EN 54 Part 3, the MT range boasts leading acoustics,
modern curves and low power consumption.
MT
The Wafer is the thinnest platform sounder on the market and is renowned for its 360° sound dispersal.
MT
With beauty running in the family, the FlashTone sounder/beacon unit offers all the modern features and
MT
functionality of the Banshee but with the addition of several different coloured beacon lenses to enhance
MT
the evacuation signal. The FlashDome stand-alone beacon features ultra-efficient LEDs and is ideal for use
in fire alarm systems which need to be upgraded or designed for conformity to DDA requirements.
The Multi-Tone range is complemented by a wide selection of accessories to suit all applications. Together,
the MT Range is unmatched for diversity and ease of installation.
Banshee
MT
Industry leading sounder with enhanced aesthetics
32 user-selectable tones - industry standard compatible
EN 54 part 3 tested and compliant with the CPD
LPCB and VdS approved
Simple push and twist bayonet mounting with locking screw
Easy to install with side and rear cable entry
Robust 'two in two out' 2.5mm terminals
Choice of three volume levels
Very low current consumption
Extensive series of accessories
for a wide range of applications
0832
MT
Wafer
32 tones designed to be compatible with Banshee
MT
EN 54 part 3 tested and compliant with the CPD
Slimmest profile in the industry
Colours matched to leading detectors
Omni-directional sound (see Polar Plot overleaf)
Low current consumption
Choice of three volume levels
Installer friendly terminals
Suitable for ceiling or wall mounting
Front plate for stand-alone use available
Robust and easily connected 'two in two out' 2.5mm terminals
Supplied with fixing screws
0832
MT
FlashTone
LED & Xenon Sounder/Beacons
With the option of low current LED or
bright Xenon beacons, the FlashToneMT
series is highly versatile.
Whilst most other manufacturers'
strobe/sounders require a link to be
manually inserted between terminals to
enable the sounder and beacon functions
MT
to operate together, FlashTone products
are fully operational without modification a true AV unit.
Choice of LED or Xenon beacon
Sounder and beacon operate
with no links required
Easily isolated for two stage
operation
Wide range of colour
combinations
EN 54 part 3 tested and
compliant with the CPD
MT
If the FlashTone is required to operate as
a dual function sounder/beacon, then the
incoming terminals can be easily isolated
by cutting two obvious links to allow for
staged alarms and two stage gas
extinguishant systems.
MT
FlashDome
0832
LED Beacon
MT
Building on the success of the Banshee
range and completing this class-leading
group of products, is the FlashDomeMT.
MT
The FlashDome features ultra-efficient
LEDs and is ideal for use in fire alarm
systems which need to be upgraded or
designed for conformity to DDA
requirements.
Ultra-efficient LEDs
Very low current consumption
Compatible with other MT
products and accessories
Sleek, low-profile design
MT
The FlashDome is 100% compatible with
the rest of the MT range and utilises the
same shallow and deep bases and broad
range of accessories.
VIMPEX
Shaping Alarm Technology
Specification
MT
Model
MT
MT
Wafer
Banshee
.
Operating Voltage
MT
FlashTone (Xenon)
FlashTone (LED)
FlashDome
.
10 - 28 Vdc
----
12 Vdc (10 - 14 Vdc) / 24 Vdc (20 - 28 Vdc)
Operating Voltage (EN54-3)
MT
Mean Current @12V
Note 1
Note 1
Strobe: 90mA + Sounder Strobe: 5mA + Sounder
5mA
Mean Current @24V
Note 1
Note 1
Strobe: 40mA + Sounder Strobe: 5mA + Sounder
5mA
Body Colours
Red, White & Grey
Various whites
to match detectors
Red & White
Red
Temperature Range
-40 to +70 C
-40 to +70 C
-20 to +55 C
-25 to +70 C
-25 to +70 C
Weatherproofing
(IP66 requires deep base)
IP45 or IP66
Internal use only
IP45 or IP66
IP45 or IP66
IP45 or IP66
Volume control
(3 switch settings)
High, Medium (-10dBA), High, Medium (-6dBA), High, Medium (-10dBA), High, Medium (-10dBA), ---Low (-20dBA)
Low (-12dBA)
Low (-20dBA)
Low (-20dBA)
o
o
Red
o
o
o
2
Screw terminals for 0.28 to 2.5mm wire conductor
Connections
Light Output Rating
----
----
1W
0.5Cd
1.0Cd
Flash Rate
----
----
60/Minute
60/Minute
60/Minute
Lens Colour (Polycarbonate) ----
----
Red, Clear, Green
Blue & Amber
Red & Clear
Red
Further manufacturers acoustic data is available upon request
Note1. See Tone Specification table on back page
Installation - MT Range Common Base
Standard
Deep Base (IP66)
92
92
Hole x2
4.5
Slot x4
4.5
Hole x2
4.5
Slot x4
4.5
o
o
45
45
48
48
50
62
67
View from
inside base
46
View from
inside base
Dimensions (mm)
MT
Installation - Banshee
MT
Banshee
with Standard Base (Type A)
Locking
screw
MT
Banshee
with Deep Base (Type B)
71.27
95.27
30
20.3
14
Dimensions (mm)
Cable gland entries x2
(x1 on reverse) - 21
36.8
MT
Installation - FlashTone
MT
FlashToneMT with Standard Base (Type A)
Locking
screw
FlashTone with Deep Base (Type A)
80
64
64
102.8
30
20.3
16
14
16
36.8
Cable gland entries
x2 (x1 on reverse) - 21
Dimensions (mm)
MT
Installation - FlashDome
FlashDome
MT
MT
FlashDome with Deep Base
with Standard Base
Locking
screw
65
89
30
20.3
Cable gland entries x2
(x1 on reverse) - 21
14
36.8
Dimensions (mm)
Installation - WaferMT
MT
MT
Wafer (Type A)
Wafer Sound Output Polar Plot
50
102.25
Hole x2
4.4
Slot x2
4.4 x 14.4
15
5
ON
o
o
1 2 3 4 5 6 7 8
SOUND
SELECTION
VOL.
Alt. Sound
13/99
0v
+V
9-30v dc
MULTI-TONE
WAFER SOUNDER
Hosiden Besson Ltd.
MADE IN UK
10
70
20.8
Dimensions (mm)
165
VIMPEX
Shaping Alarm Technology
Accessories Specification
Part No.
Accessory
Use with
MT
BansheeMT FlashToneMT FlashDome
Flush Mounting Ring
8502900
ü
ü
ü
Combination Bracket
8503000
ü
ü
ü
Mains Pack
8502700
ü
ü
ü
Wall Fixing Clip
8503100
ü
ü
ü
WaferMT Cable Spacing Ring
8502800
Steel Web Stopper:
S9615/A
ü
ü
ü
S9605
ü
ü
ü
WaferMT
110/230 Vac to 24 Vdc
ü
Low Profile Cage
(Supplied with full fixing kit)
Steel Web Stopper:
ü
Surface Wiring Cage
(Supplied with full fixing kit)
S9604
Steel Web Stopper:
ü
Wafer/Bell Cage - Flush wiring
(Supplied with full fixing kit)
Accessories Installation
Flush Mounting Ring
34
134
105
3.4
Spring steel ears
15 x 30 swg
Dimensions (mm)
Accessories Installation
Dimensions (mm)
Combination Bracket
Wall Fixing Clip & Deep Base
Deep Base
106
Cable gland entries x2
(x1 on reverse)
44.5
5.3
17.6
Fixing Clip
21
75
4.5
25
100 206
30
108
122
83
5.0
Thickness
18.5
60
20.3
36.8
Mains Pack
MT
Wafer
Cable Spacing Ring
108.7
70
13.7
47
36.8
92
58.8
7.6
Steel Web Stopper
Low Profile Cage
Surface Wiring Cage
Wafer Cage
180
95
175
120
75
100
125
80
VIMPEX
Shaping Alarm Technology
VIMPEX
Vimpex Ltd
Star Lane, Great Wakering
Essex, SS3 0PJ England.
Tel: +44 (0) 1702 216999
Fax: +44 (0) 1702 216699
E-mail: sales@vimpex.co.uk
Quality System Certificate No. 456
Assessed to ISO 9001:2000
We reserve the right to change or amend any
design or specification in line with our policy
of continuing development and improvement.
Part No: DS/BNSMT/ISS 10
†
MT
Continuous LF
Back Up Alarm LF
7
8
Australian Evacuation Signal
23
Swedish Tone (Fire)
Swedish Tone (All Clear)
ISO8201 LF
ISO8201 HF
BT Banshee (FP1063.1)
BT Banshee (FP1063.1)
Bell Tone
26
27
28
29
30
31
32
US Temporal Tone HF
Australian Alert Signal
22
25
French Fire Sound
21
US Temporal Tone LF
Din Tone (DK)
20
24
Alternate HF
Slow Whoop
18
19
Banshee HF Fast Sweep (New)
Back Up Alarm HF
16
17
Banshee/Bedlam HF Slow Sweep
Banshee/Bedlam HF Continuous
14
15
Banshee/Bedlam HF Buzz
Banshee/Bedlam HF Fast Sweep
12
13
Medium Sweep LF
Alternate LF
10
11
Alternate LF
Medium Sweep LF
9
Banshee LF Fast Sweep (New)
Banshee LF Slow Sweep
Banshee LF Continuous
3
4
5
Banshee LF Fast Sweep
2
6
Banshee LF Buzz
1
No. Description
Tone Information
†
†
†
†
†
†
Water Leakage Detection Systems
†
Stopper Range of Vandal Deterrent Products
Fire-Cryer Voice Enhanced Sounders
®
Fire Alarm Bells
Beacons and Strobe Lights
Sounder Accessories & Fire System Ancillaries
Bell Tone
†
Continuous 1000Hz
†
Yodel 800Hz/1000Hz, 0.25s each frequency
Intermittent 2900Hz 500ms on, 500ms off
Intermittent 970Hz 500ms on, 500ms off
Continuous 660Hz
Intermittent 660Hz 150ms on, 150ms off
†
2900Hz for 0.5s on 0.5s off, for 3 phases, silence for 1.5s & repeat
950Hz for 0.5s on 0.5s off, for 3 phases, silence for 1.5s & repeat
500Hz to 1200Hz sweeping, 3.75s on, 0.25s off
420Hz repeating 0.625s on, 0.625s off
554Hz for 100ms and 440Hz for 400ms
1200Hz falling to 500Hz over 1s, silence 10ms, repeat
500Hz rising to 1200Hz over 3.5s, silence 0.5s, repeat
Alternating Tones 2400/2900 at 3Hz
Intermittent at 2900Hz 1s on, 1s off
2450Hz to 3100Hz swept at 9Hz
Continuous 2900Hz
2400Hz to 2900Hz at 3Hz
2400Hz to 2900Hz at 9Hz
2400Hz to 2900Hz at 120Hz
Alternating Tones 800/950 at 3Hz
†
800Hz to 1000Hz swept at 0.5s
Alternating 800Hz/1000Hz, 0.5s each sound
Intermittent at 950Hz 1s on, 1s off
Continuous at 970Hz
†
800Hz to 970Hz swept at 1Hz
830Hz to 970Hz swept at 9Hz
Continuous at 850Hz
†
800Hz to 950Hz swept at 3Hz
†
800Hz to 950Hz swept at 9Hz
†
800Hz to 950Hz swept at 120Hz
Frequency and Timing
#
2nd Tone
4
94
6
32
96
8
8
8
93
95
8
4
5
4
6
3
6
3
5
6
6
12
7
12
12
12
12
12
6
5
8
4
6
6
6
6
6
6
31
106
96
84
81
105
96
96
88
90
93
96
104
105
103
105
103
103
102
96
95
94
97
97
95
95
95
94
94
31
29
28
27
26
15
4
4
4
4
4
4
15
15
15
15
15
15
15
4
4
4
4
7
7
4
4
4
4
mA
(Typ) (Typ)
dBA
mA
101
102
101
112
103
89
87
112
103
103
94
96
101
101
110
112
110
112
110
110
110
103
101
101
103
103
102
101
101
100
100
100
17
17
14
15
7
14
7
12
6
12
6
10
14
12
25
15
25
30
25
25
25
14
12
14
7
12
12
12
12
12
12
12
(Typ) (Typ)
dBA
BansheeMT BansheeMT
FlashToneMT FlashToneMT
(12V)
(24V)
6
7
8
6
84
84
80
4
8
83
95
3
5
86
87
6
95
5
4
88
84
3
83
5
5
13
94
88
4
8
87
14
87
95
84
15
13
90
94
15
15
90
92
6
7
84
84
7
7
4
84
84
84
6
6
84
84
6
6
84
6
84
84
85
mA
(Typ)
dBA
(Typ)
WaferMT
(12V)
87
90
90
101
91
93
92
101
90
94
90
90
93
95
100
101
94
100
96
98
96
90
90
90
90
90
90
90
90
90
90
91
(Typ)
dBA
12
16
14
17
8
10
6
13
8
10
5
8
10
10
28
16
31
30
30
30
30
14
13
14
8
14
13
13
13
13
13
13
(Typ)
mA
WaferMT
(24V)
Tone Specification
Notes:
# 2nd tone is for Banshee and Wafer only and has not been verified to be EN54-3 compliant.
MT
- Full manufacturers data is available upon request.
Tone meets frequency requirements of BS 5839 pt.1 2002.
www.vimpex.co.uk
Other Products
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising