Power Distribution Units
Power Distribution Units
www.crenlo.com/emcor | 507-287-3535
Our Commitment
Crenlo’s objective is to define our customer’s quality requirements, and to produce products and
services that meet or exceed those expectations. Crenlo is committed to continuous improvement
through education, process advancements and problem prevention.
Power Distribution Units
Crenlo offers one of the largest selection of enclosure power distribution units (PDUs) available on the market.
This complete suite of power products is designed specifically to help IT professionals meet rapidly escalating
power requirements.
Crenlo’s PDUs are distinguished by their quality, dependability and versatility in robust electrical applications.
All products are designed with an emphasis on safety and reliability. The line includes an extensive range
of vertical, Zero U products, which do not occupy server space in racks, as well as 1U horizontal formats.
Environmental Monitoring options are also available. All units ship with mounting brackets and hardware.
High Density Power Solutions
Everyday higher levels of performance are expected without sacrificing reliability. Crenlo offers high power
density solutions to meet your needs. We offer both rack mount and vertical mount three-phase PDUs ranging
from 50A to 60A input capacities. These sophisticated units allow an entire rack of equipment to be powered
from a single power cord input.
Custom Power Strips Delivered In Days
Crenlo can accommodate custom power strip requests with remarkable turnaround times. Simply provide your
specifications (use our custom order form) and we will provide the design, specs, and quote in just days. Final
product often ships in under two weeks.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
1
How Much Power Is Needed?
Add the power ratings in Watts (W) from the label(s) of the equipment you want to put in the cabinet.
Example: 30 servers each using 300 Watts = 30 x 300 = 9,000 Watts, or 9kW.
Sometimes, the labels indicate Amps (A) instead of Watts (W).
In this case, multiply Voltage (V) and Current (A) values to get an approximate value for power.
Power Rating and Requirements for a Single AC Feed
The chart below shows the relationship between single and three phase power feeds and the
associated kW load that they will support when de-rated by 80% per UL®/NEC requirements.
2
Amps
Amps
Volts
Volts
[Nameplate]
[Branch Circuit Rating]
[Nameplate]
[Actual Delivered]
Phase
80% Watts (kW)
Watts
12
15
125
120
1
1,440 (1.4)
1,800
16
20
125
120
1
1,920 (1.9)
2,400
24
30
125
120
1
2,880 (2.8)
3,600
16
20
250
208
1
3,328 (3.3)
4,160
24
30
250
208
1
4,992 (4.9)
6,240
35
50
250
208
1
7,280 (7.3)
10,400
48
60
250
208
1
9,984 (10.0)
12,480
4,600
16
20
230
230
1
3,680 (3.7)
24
30
230
230
1
5,520 (5.5)
9,600
48
60
230
230
1
11,040 (11.0)
13,800
16
20
208
208
3
5,757 (5.7)
7,197
24
30
208
208
3
8,636 (8.6)
10,795
35
50
208
208
3
12,594 (12.6)
17,992
48
60
208
208
3
17,272 (17.2)
21,590
80
100
208
208
3
28,787 (28.8)
35,984
100
125
208
208
3
35,984 (36.0)
44,980
120
150
208
208
3
43,181 (43.2)
53,976
16
20
230
230
3
11,040 (11.0)
13,800
24
30
230
230
3
16,560 (16.6)
20,700
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Table of Contents
PDU Overview .................................................. 4
Basic PDUs ....................................................... 6
Metered PDUs .................................................. 8
Monitored PDUs ............................................. 12
Switched PDUs .............................................. 18
Environmental Monitoring .............................. 26
Environmental Monitoring Accessories .......... 38
Mounting Brackets .......................................... 41
Reference ........................................................ 43
80% De-rating Factor
Since most customers base their PDU input current specifications on the branch circuit ratings
that the PDU is intended to be connected to we have set up our catalog to reflect this. However,
when you receive a PDU from us, the label may carry a nameplate current rating that is 80% of
the branch circuit rating in order to comply with UL®/NEC requirements.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
3
Overview
Type
Part Number
Amps
Volts
kW
Total Receptacle Qty
Configuration
Page #
Basic
PDU-615R-PC
15
120
1.4
6
19” Hor
6
Basic
WM-180615-DW
15
120
1.4
6
18” Vert
6
Basic
WM-481015-DW
15
120
1.4
10
48” Vert
6
Basic
PDU-620R-PC
20
120
1.4
6
19” Hor
6
Basic
WM-180615-PC
15
120
1.4
6
18” Vert
7
Basic
WM-481015-PC
15
120
1.4
10
48” Vert
7
Basic
WM-180620-PC
20
120
1.4
6
18” Vert
7
Basic
WM-481020-PC
20
120
1.4
10
48” Vert
7
Basic
WM-482430-PC
30
120
1.4
24
48” Vert
7
Metered - Power
PDUG-JBCN200-102D20DST5
20 x 2
120 x 2
1.9 x 2
20
66” Vert
9
Metered - Power
PDUG-JBCN200-102D20DTL5
20 x 2
120 x 2
1.9 x 2
20
66” Vert
9
Metered - Power
PDUG-VRELCN080-103I44TL6
30
208
4.9
8
17” Vert / Hor
9
Metered - Power
PDUG-XPBC240-103D20TL6
30
208
4.9
24
66” Vert
9
Metered - Power
PDUG-XPBC300-103IN6TL6
30
208
4.9
30
66” Vert
9
Metered - Current
PDUG-VHVBAN248-102D20TL21
20 X 3~
120 / 208 WYE
5.7
24
66” Vert
10
Metered - Current
PDUG-VHVBAN308-102IN6TL21
20 X 3~
120 / 208 WYE
5.7
30
66” Vert
10
Metered - Current
PDUG-VHVBAN309-102M11TL21
20 X 3~
120 / 208 WYE
5.7
30
66” Vert
10
Metered - Current
PDUG-XPBA248-103D20TL21
30 X 3~
120 / 208 WYE
8.6
24
66” Vert
11
Metered - Current
PDUG-XPBA308-103IN6TL21
30 X 3~
120 / 208 WYE
8.6
30
66” Vert
11
Metered - Current
PDUG-XPBA308-103IN6TL15
30 X 3~
208 DELTA
8.6
30
66” Vert
11
Metered - Current
PDUG-ZPBA300-106IN6PS6
60
208
9.9
30
66” Vert
11
Power Monitoring
PDUG-RCXRN102-102D20ST5-D
20
120
1.9
10
19” Hor
14
Power Monitoring
PDUG-RCXRN102-102D20TL5-D
20
120
1.9
10
19” Hor
14
Power Monitoring
PDUG-RCXRN122-102C13C20-D
20
120 or 208
1.9 or 3.3
12
19” Hor
14
Power Monitoring
PDUG-RCXBN242-102D20ST5-D
20
120
1.9
24
66” Vert
15
Power Monitoring
PDUG-RCXBN242-102D20TL5-D
20
120
1.9
24
66” Vert
15
Power Monitoring
PDUG-RCXBN302-102IN6ST6-D
20
208
3.3
30
66” Vert
15
Power Monitoring
PDUG-RCXBN302-102IN6TL6-D
20
208
3.3
30
66” Vert
15
Power Monitoring
PDUG-RCXBN243-102D20TL21-D
20 X 3~
120 / 208 WYE
5.7
24
66” Vert
16
Power Monitoring
PDUG-RCXBN308-102IN6TL21-D
20 X 3~
120 / 208 WYE
5.7
30
66” Vert
16
Power Monitoring
PDUG-RCXB240-103D20TL5-D
30
120
2.8
24
66” Vert
16
Power Monitoring
PDUG-RCXB240-103D20TL6-D
30
208
4.9
24
66” Vert
16
Power Monitoring
PDUG-RCXB300-103IN6TL6-D
30
208
4.9
30
66” Vert
16
Power Monitoring
PDUG-RCXB243-103D20TL21-D
30 X 3~
120 / 208 WYE
8.6
24
66” Vert
17
Power Monitoring
PDUG-RCXB308-103IN6TL21-D
30 X 3~
120 / 208 WYE
8.6
30
66” Vert
17
Power Monitoring
PDUG-RCXW368-105IT6CS15-35D
35 X 3~
208 DELTA
10.0
36
70” Vert
17
Power Monitoring
PDUG-RCXW308-105IN6CS15-D
50 X 3~
208 DELTA
14.4
30
72” Vert
17
Power Monitoring
PDUG-RCXW308-106IN6PS15-D
60 X 3~
208 DELTA
17.2
30
72” Vert
17
Switched
PDUG-RCMW240-103S15TL5-OD
30
120
2.8
24
70” Vert
20
Switched
PDUG-RCMW240-103PJ4TL6-OD
30
208
4.9
24
70” Vert
20
Switched
PDUG-RCMW248-103PK3TL21-OD
30 X 3~
120 / 208 WYE
8.6
24
72” Vert
21
Switched
PDUG-RCMW248-103PK3TL15-OD
30 X 3~
208 DELTA
8.6
24
72” Vert
21
Switched Ultra
PDUG-RCURN082-002L13C20-OD
20
120 or 208
1.9 or 3.3
8
19” Hor
24
Switched Ultra
PDUG-RCUBN248-102PK3TL21-OD
20 X 3~
120 / 208 WYE
5.7
24
66” Vert
24
Switched Ultra
PDUG-RCUW240-103PJ4TL6-OD
30
208
4.9
24
70” Vert
24
Switched Ultra
PDUG-RCUW248-103PK3TL21-OD
30 X 3~
120 / 208 WYE
8.6
24
72” Vert
24
Switched Ultra
PDUG-RCUW248-105PK3CS15-35OD
35 X 3~
208 DELTA
10.0
24
72” Vert
25
Switched Ultra
PDUG-RCUB248-106PH6PS15-OD
60 X 3~
208 DELTA
17.2
24
66” Vert
25
Environmental Control Parts and Accessories
4
26-39
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Overview
Type
Part Number
Receptacle Type / Qty
Basic
PDU-615R-PC
5-20R / 6
Basic
WM-180615-DW
Basic
WM-481015-DW
Basic
Breaker Amp / Qty
Cord Length
Plug Type
Page #
-
15’
5-15P
6
5-20R / 6
-
12” Leads
-
6
5-20R / 10
-
12” Leads
-
6
PDU-620R-PC
5-20R / 6
-
15’
5-20P
6
Basic
WM-180615-PC
5-20R / 6
-
15’
5-15P
7
Basic
WM-481015-PC
5-20R / 10
-
15’
5-15P
7
Basic
WM-180620-PC
5-20R / 6
-
15’
5-20P
7
Basic
WM-481020-PC
5-20R / 10
-
15’
5-20P
7
Basic
WM-482430-PC
5-20R / 24
-
15 / 2 X 2P
12’
L5-30P
7
Metered - Power
PDUG-JBCN200-102D20DST5
5-20R / 20
-
-
10’ x 2
5-20P
9
Metered - Power
PDUG-JBCN200-102D20DTL5
5-20R / 20
-
-
10’ x 2
L5-20P
9
Metered - Power
PDUG-VRELCN080-103I44TL6
C-13 / 4
C-19 / 4
15 / 4
10’
L6-30P
9
Metered - Power
PDUG-XPBC240-103D20TL6
6-20R / 24
-
20 / 2 X 2P
10’
L6-30P
9
Metered - Power
PDUG-XPBC300-103IN6TL6
C-13 / 24
C-19 / 6
20 / 2 X 2P
10’
L6-30P
9
Metered - Current
PDUG-VHVBAN248-102D20TL21
6-20R / 24
-
-
10’
L21-20P
10
Metered - Current
PDUG-VHVBAN308-102IN6TL21
C-13 / 24
C-19 / 6
-
10’
L21-20P
10
Metered - Current
PDUG-VHVBAN309-102M11TL21
L6-20R / 6
5-20R / 24
-
10’
L21-20P
10
Metered - Current
PDUG-XPBA248-103D20TL21
6-20R / 24
-
20 / 3 x 2P
10’
L21-30P
11
Metered - Current
PDUG-XPBA308-103IN6TL21
C-13 / 24
C-19 / 6
20 / 3 x 2P
10’
L21-30P
11
Metered - Current
PDUG-XPBA308-103IN6TL15
C-13 / 24
C-19 / 6
20 / 3 x 2P
10’
L15-30P
11
Metered - Current
PDUG-ZPBA300-106IN6PS6
C-13 / 24
C-19 / 6
20 / 3 x 2P
10’
2P / 3W
11
Power Monitoring
PDUG-RCXRN102-102D20ST5-D
5-20R / 10
-
-
10’
5-20P
14
Power Monitoring
PDUG-RCXRN102-102D20TL5-D
5-20R / 10
-
-
10’
L5-20P
14
Power Monitoring
PDUG-RCXRN122-102C13C20-D
C-13 / 12
-
-
-
C-20
14
Power Monitoring
PDUG-RCXBN242-102D20ST5-D
5-20R / 24
-
-
10’
5-20P
15
Power Monitoring
PDUG-RCXBN242-102D20TL5-D
5-20R / 24
-
-
10’
L5-20P
15
Power Monitoring
PDUG-RCXBN302-102IN6ST6-D
C-13 / 24
C-19 / 6
-
10’
6-20P
15
Power Monitoring
PDUG-RCXBN302-102IN6TL6-D
C-13 / 24
C-19 / 6
-
10’
L6-20P
15
Power Monitoring
PDUG-RCXBN243-102D20TL21-D
5-20R / 24
-
-
10’
L21-20P
16
Power Monitoring
PDUG-RCXBN308-102IN6TL21-D
C-13 / 24
C-19 / 6
-
10’
L21-20P
16
Power Monitoring
PDUG-RCXB240-103D20TL5-D
5-20R / 24
-
20 / 2
10’
L5-30P
16
Power Monitoring
PDUG-RCXB240-103D20TL6-D
6-20R / 24
-
20 / 2 x 2P
10’
L6-30P
16
Power Monitoring
PDUG-RCXB300-103IN6TL6-D
C-13 / 24
C-19 / 6
20 / 2 x 2P
10’
L6-30P
16
Power Monitoring
PDUG-RCXB243-103D20TL21-D
5-20R / 24
-
-
10’
L21-30P
17
Power Monitoring
PDUG-RCXB308-103IN6TL21-D
C-13 / 24
C-19 / 6
-
10’
L21-30P
17
Power Monitoring
PDUG-RCXW368-105IT6CS15-35D
C-13 / 30
C-19 / 6
20 / 3 x 2P
10’
3P / 4W
17
Power Monitoring
PDUG-RCXW308-105IN6CS15-D
C-13 / 24
C-19 / 6
20 / 6 x 2P
10’
3P / 4W
17
Power Monitoring
PDUG-RCXW308-106IN6PS15-D
C-13 / 24
C-19 / 6
20 / 6 x 2P
10’
3P / 4W
17
Switched
PDUG-RCMW240-103S15TL5-OD
5-15R / 24
-
20 / 2
10’
L5-30P
20
Switched
PDUG-RCMW240-103PJ4TL6-OD
C-13 / 20
C-19 / 4
20 / 2 x 2P
10’
L6-30P
20
Switched
PDUG-RCMW248-103PK3TL21-OD
C-13 / 21
C-19 / 3
20 / 3 x 2P
10’
L21-30P
21
Switched
PDUG-RCMW248-103PK3TL15-OD
Locking C-13 / 21
Locking C-19 / 3
20 / 3 x 2P
10’
L15-30P
21
Switched Ultra
PDUG-RCURN082-002L13C20-OD
Locking C-13 / 8
-
-
-
C-20
24
Switched Ultra
PDUG-RCUBN248-102PK3TL21-OD
Locking C-13 / 21
Locking C-19 / 3
-
10’
L21-20P
24
Switched Ultra
PDUG-RCUW240-103PJ4TL6-OD
Locking C-13 / 20
Locking C-19 / 4
20 / 2 x 2P
10’
L6-30P
24
Switched Ultra
PDUG-RCUW248-103PK3TL21-OD
Locking C-13 / 21
Locking C-19 / 3
20 / 3 x 2P
10’
L21-30P
24
Switched Ultra
PDUG-RCUW248-105PK3CS15-35OD
Locking C-13 / 21
Locking C-19 / 3
20 / 3 x 2P
10’
3P / 4W
25
Switched Ultra
PDUG-RCUB248-106PH6PS15-OD
Locking C-13 / 18
Locking C-19 / 6
20 / 6 x 2P
10’
3P / 4W
25
Environmental Control Parts and Accessories
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
26-39
5
Basic
Available in a range of power capacities and configurations, basic PDUs provide reliable power distribution.
They are the best value for simple power distribution in server cabinets and data centers.
Front View
Part Number / Description
PDU-615R-PC
Amps: 15 (Single Phase)
Volts: 120
kW: 1.4
Rear View
Receptacles
Type / QTY
5-15R / 6 (on rear)
Breaker
Amperage / QTY
15 / 1
Monitoring
Dimensions
W x H x D (“)
5-15P Straight-Blade
15’ Cord
N/A
1U 19” Horizontal
19.00 x 1.75 x 2.57
5-20P Straight Blade
15’ Cord
N/A
1U 19” Horizontal
19.00 x 1.75 x 2.57
Monitoring
Dimensions
W x H x D (“)
N/A
0U 18” Vertical
1.43 x 18.00 x 1.13
N/A
0U 48” Vertical
1.43 x 48.00 x 1.13
Plug / Inlet Type
On-Off Switch
Yes
PDU-620R-PC
Amps: 20 (Single Phase)
Volts: 120
kW: 1.4
5-20R / 6 (on rear)
20 / 1
On-Off Switch
Yes
Includes mounting hardware.
Part Number / Description
WM-180615-DW
Amps: 15 (Single Phase)
Volts: 120
kW: 1.4
Receptacles
Type / QTY
5-15R / 6
Breaker
Amperage / QTY
Plug / Inlet Type
N/A
6” Direct Wire Leads
On-Off Switch
Threaded for 3/4”
conduit fitting.
No
WM-481015-DW
Amps: 15 (Single Phase)
Volts: 120
kW: 1.4
5-15R / 10
N/A
6” Direct Wire Leads
On-Off Switch
Threaded for 3/4”
conduit fitting.
No
Mounting (p. 41-42): Includes Spring Clips and mounting hardware.
6
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Basic
Part Number / Description
WM-180615-PC
Amps: 15 (Single Phase)
Volts: 120
kW: 1.4
Receptacles
Type / QTY
5-15R / 6
Breaker
Amperage / QTY
15 / 1
Monitoring
Dimensions
W x H x D (“)
5-15P Straight-Blade
15’ Cord
N/A
0U 18” Vertical
1.62 x 18.00 x 1.21
5-20P Straight Blade
15’ Cord
N/A
0U 18” Vertical
1.62 x 18.00 x 1.21
Monitoring
Dimensions
W x H x D (“)
5-15P Straight-Blade
15’ Cord
N/A
0U 48” Vertical
1.62 x 48.00 x 1.21
5-20P Straight Blade
15’ Cord
N/A
0U 48” Vertical
1.62 x 48.00 x 1.21
L5-30P Locking
12’ Cord
N/A
0U 48” Vertical
1.50 x 48.00 x 2.87
Plug / Inlet Type
On-Off Switch
No
WM-180620-PC
Amps: 20 (Single Phase)
Volts: 120
kW: 1.4
5-20R / 6
20 / 1
On-Off Switch
No
Mounting (p. 41-42): Includes Spring Clips and mounting hardware.
Part Number / Description
WM-481015-PC
Amps: 15 (Single Phase)
Volts: 120
kW: 1.4
Receptacles
Type / QTY
5-15R / 10
Breaker
Amperage / QTY
15 / 1
Plug / Inlet Type
On-Off Switch
No
WM-481020-PC
Amps: 20 (Single Phase)
Volts: 120
kW: 1.4
5-20R / 10
20 / 1
On-Off Switch
No
WM-482430-PC
Amps: 30 (Single Phase)
Volts: 120
kW: 1.4
5-20R / 24
15 / 2
On-Off Switch
No
Mounting (p. 41-42): Includes Spring Clips and mounting hardware.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
7
Metered - Power and Current
Metered PDU’s
Metered PDUs contain a local meter to provide essential real-time information crucial for rack load capacity
and balancing. This data is critical to insure breakers are not tripped by exceeding maximum current capacity.
Additional information including voltage, wattage and power factor provide a more comprehensive power
overview ideal for preventative maintenance and rack diagnostics.
Power Meter
The power meter offers more detailed power information through a scrolling display
of the four critical power measurements: Power Factor, Amps, Volts and Watts.
This meter is especially useful when adding, removing or adjusting equipment,
because it provides instant power usage feedback, helping you avoid overloading
your PDU.
Specification
+/- 2% Accuracy with Full Scale
50/60Hz sine wave input
Power Factor –
The ratio of Real Power to
Apparent Power. Apparent
Power is the calculation of
Volts RMS* and Amps RMS*.
Volts –
Displays Voltage RMS*
Amps –
Displays Current Draw
in Amps RMS*
Watts –
Displays power in Watts
RMS*. Value is integration
of instantaneous current and
volt, referred to as real Power.
* RMS - Acronym for Root Mean Squared
Current Meter
The current meter option provides an accurate True RMS reading of the current
draw to monitor PDU performance closely and ensure that equipment power usage
is within acceptable ranges - helping avoid nuisance breaker trips.
This meter is especially useful when adding, removing or adjusting equipment,
because it provides instant power usage feedback, helping you avoid overloading
your PDU.
Specification
+/- 3.5% Accuracy with Full Scale
50/60Hz sine wave input
Amps –
Displays current draw
in Amps RMS*.
Circuit 1 –
Represents Phase X
Circuit 2 –
Represents Phase Y
Circuit 3 –
Represents Phase Z
* RMS - Acronym for Root Mean Squared
8
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Metered - Power
Part Number / Description
PDUG-JBCN200-102D20DST5
Amps: 20 x 2 (Single Phase)
Volts: 120 x 2
kW: 1.9 x 2
Receptacles
Type / QTY
5-20R / 20
20 / 2
Monitoring (local)
Dimensions
W x H x D (“)
(2) 5-20P Straight-Blade
10’ Cord
•Power Meter: (Amps, Volts, Watts,
Power Factor)
0U 66” Vertical
1.85 x 66.25 x 1.30
(2) L5-20P Twist-Lock
10’ Cord
•Power Meter: (Amps, Volts, Watts,
Power Factor)
0U 66” Vertical
1.85 x 66.25 x 1.30
Plug / Inlet Type
On-Off Switch
Non-Surge
PDUG-JBCN200-102D20DTL5
Amps: 20 x 2 (Single Phase)
Volts: 120 x 2
kW: 1.9 x 2
Breaker
Amperage / QTY
No
5-20R / 20
20 / 2
On-Off Switch
Non-Surge
No
Detailed monitoring specs available on page 8. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
Part Number / Description
PDUG-VRELCN080-103I44TL6
Amps: 30 (Single Phase)
Volts: 208
kW: 4.9
Receptacles
Type / QTY
C-13 / 4
C-19 / 4
Breaker
Amperage / QTY
15 / 4
Plug / Inlet Type
Monitoring (local)
L6-30P Twist-Lock
10’ Cord
•Power Meter: (Amps, Volts, Watts,
Power Factor)
Dimensions
W x H x D (“)
0U 17” Vertical
1.72 x 17.00 x 1.85 /
1U 19” Horizontal
On-Off Switch
Non-Surge
No
Detailed monitoring specs available on page 8. | Mounting (p. 41-42): Includes 19” Horizontal Brackets, Mini “L” Vertical Brackets and mounting hardware.
Part Number / Description
PDUG-XPBC240-103D20TL6
Amps: 30 (Single Phase)
Volts: 208
kW: 4.9
Receptacles
Type / QTY
6-20R / 24
Non-Surge
20 / 2 X 2P
Plug / Inlet Type
Monitoring (local)
Dimensions
W x H x D (“)
L6-30P Twist-Lock
10’ Cord
•Power Meter: (Amps, Volts, Watts,
Power Factor)
0U 66” Vertical
2.00 x 66.25 x 2.00
L6-30P Twist-Lock
10’ Cord
•Power Meter: (Amps, Volts, Watts,
Power Factor)
0U 66” Vertical
2.00 x 66.25 x 2.00
On-Off Switch
Non-Surge
PDUG-XPBC300-103IN6TL6
Amps: 30 (Single Phase)
Volts: 208
kW: 4.9
Breaker
Amperage / QTY
No
C-13 / 24
C-19 / 6
20 / 2 X 2P
On-Off Switch
No
Detailed monitoring specs available on page 8. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
9
Metered - Current
Part Number / Description
PDUG-VHVBAN248-102D20TL21
Amps: 20 (3 Phase)
Volts: 120 / 208 WYE
kW: 5.7
Receptacles
Type / QTY
6-20R / 24
Non-Surge
Monitoring (local)
Dimensions
W x H x D (“)
L21-20P Twist-Lock
10’ Cord
•Current Meter: (3 Phase Scrolling)
0U 66” Vertical
2.00 x 66.25 x 2.00
L21-20P Twist-Lock
10’ Cord
•Current Meter: (3 Phase Scrolling)
0U 66” Vertical
2.00 x 66.25 x 2.00
L21-20P Twist-Lock
10’ Cord
•Current Meter: (3 Phase Scrolling)
0U 66” Vertical
2.00 x 66.25 x 2.00
No
C-13 / 24
C-19 / 6
N/A
On-Off Switch
Non-Surge
PDUG-VHVBAN309-102M11TL21
Amps: 20 (3 Phase)
Volts: 120 / 208 WYE
kW: 5.7
N/A
Plug / Inlet Type
On-Off Switch
Non-Surge
PDUG-VHVBAN308-102IN6TL21
Amps: 20 (3 Phase)
Volts: 120 / 208 WYE
kW: 5.7
Breaker
Amperage / QTY
No
5-20R / 24
L6-20R / 6
N/A
On-Off Switch
No
Detailed monitoring specs available on page 8. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
3 phase units have color-coded receptacle configurations or labeling for easy identification and load balancing.
10
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Metered - Current
Part Number / Description
PDUG-XPBA248-103D20TL21
Amps: 30 (3 Phase)
Volts: 120 / 208 WYE
kW: 8.6
Receptacles
Type / QTY
6-20R / 24
Monitoring (local)
Dimensions
W x H x D (“)
L21-30P Twist-Lock
10’ Cord
•Current Meter: (3 Phase Scrolling)
0U 66” Vertical
2.00 x 66.25 x 2.00
L21-30P Twist-Lock
10’ Cord
•Current Meter: (3 Phase Scrolling)
0U 66” Vertical
2.00 x 66.25 x 2.00
L15-30P Twist-Lock
10’ Cord
•Current Meter: (3 Phase Scrolling)
0U 66” Vertical
2.00 x 66.25 x 2.00
No
C-13 / 24
C-19 / 6
20 / 3 X 2P
On-Off Switch
Non-Surge
PDUG-XPBA308-103IN6TL15
Amps: 30 (3 Phase)
Volts: 208 DELTA
kW: 8.6
20 / 3 X 2P
Plug / Inlet Type
On-Off Switch
Non-Surge
PDUG-XPBA308-103IN6TL21
Amps: 30 (3 Phase)
Volts: 120 / 208 WYE
kW: 8.6
Breaker
Amperage / QTY
No
C-13 / 24
C-19 / 6
20 / 3 X 2P
On-Off Switch
Non-Surge
No
Detailed monitoring specs available on page 8. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
3 phase units have color-coded receptacle configurations or labeling for easy identification and load balancing.
Part Number / Description
PDUG-ZPBA300-106IN6PS6
Amps: 60 (Single Phase)
Volts: 208
kW: 9.9
Non-Surge
Receptacles
Type / QTY
C-13 / 24
C-19 / 6
Breaker
Amperage / QTY
20 / 3 X 2P
Plug / Inlet Type
2P / 3W Pin & Sleeve
10’ Cord
Monitoring (local)
•Current Meter: (3 Breaker Scrolling)
Dimensions
W x H x D (“)
0U 66” Vertical
2.00 x 66.25 x 2.00
On-Off Switch
No
Detailed monitoring specs available on page 8. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
11
Monitored - Power
Monitored Power
Power Monitoring PDUs provide a comprehensive remote view of your installation’s power utilization. In addition to
Amps, Volts, Real Power, Apparent Power, Power Factor and kWatt-Hours, these versatile units provide jacks for
optional environmental monitoring. Each of these variables can play a critical role in uptime at your site in addition to
insuring energy use efficiency.
These PDUs allow local and remote current monitoring and offers alarms for issues that can arise at the breaker, circuit,
phase and aggregate level. With the advantage of seeing current usage feedback in an instant, the chances of overloading the unit when adding, removing or adjusting equipment is minimized.
Feature
Benefit
Remote power monitoring
Prevent down-time with early notification of power threshold breach
2 Remote environmental sensor ports
Monitor temperature, air flow, humidity and dew point via connected sensors
Threshold alarms - remote and local
Convenient notification via e-mail, SNMP traps and/or local audible alarm via RSD
Remote LCD display (RSD)
Easily viewable power data via RSD
Interfaces with IP web cameras
Visual monitoring of cabinet or computer room
Accessible via any web browser
Easy installation and maintenance - No external software
View data graphs and analyze historical logs.
DCiM software is available and all intelligent units (monitored and switched) have SNMP built in.
12
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Monitored - Power
Power Monitoring Connectivity Diagram
ETHERNETETHERNETETHERNET
RSD
Remote Display
Temperature
Sensor
Temperature, Airflow, Dew point
and Humidity Sensor
Optional Remote Sensors Connect via RJ12
Static IP Address
for set-up and
configuration
DLink® Web
Enabled Camera
Specifications
• Ethernet Connection Jack
Power On Indicator
• Idle Indicator
• Activity Indicator
• Software Reset Button
• External Sensor Connection Ports
Two RJ12 Jacks - add up to 16 Remote Sensors
• FCC Part 15 Class A Conformance
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
• Internal Power Sensors
Volts RMS: 80-280 VAC
Amps RMS: 0-32A
• Remote Display (RSD2X8) Connection Jack
13
Monitored - Power
Front View
Rear View
Front View
Rear View
Front View
Rear View
Part Number / Description
PDUG-RCXRN102-102D20ST5-D
Amps: 20 (Single Phase)
Volts: 120
kW: 1.9
Receptacles
Type / QTY
5-20R / 10 (on rear)
Breaker
Amperage / QTY
N/A
Plug / Inlet Type
Monitoring (remote)
Dimensions
W x H x D (“)
5-20P Straight-Blade
10’ Cord
•Aggregate: Total Unit (Amps, Volts,
Volt-Amps, Watts, VA, kWh, Power
Factor, Frequency)
1U 19” Horizontal
17.00 x 1.75 x 6.5
L5-20P Twist-Lock
10’ Cord
•Aggregate: Total Unit (Amps, Volts,
Volt-Amps, Watts, VA, kWh, Power
Factor, Frequency)
1U 19” Horizontal
17.00 x 1.75 x 6.5
C-20
IEC Power Inlet with
Retaining Clamp
•Aggregate: Total Unit (Amps, Volts,
Volt-Amps, Watts, VA, kWh, Power
Factor, Frequency)
1U 19” Horizontal
17.00 x 1.75 x 6.5
On-Off Switch
No
PDUG-RCXRN102-102D20TL5-D
Amps: 20 (Single Phase)
Volts: 120
kW: 1.9
5-20R / 10 (on rear)
N/A
On-Off Switch
No
PDUG-RCXRN122-102C13C20-D
Amps: 20 (Single Phase)
Volts: 120 or 208
kW: 1.9 or 3.3
C-13 / 12 (on rear)
N/A
On-Off Switch
No
Detailed monitoring specs available on page 13. | Mounting (p. 41-42): Includes 19” Horizontal Adjustable Bracket.
IEC inlet units allow the PDU to supply 120V or 208V. The voltage distributed is determined by the voltage input
14
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Monitored - Power
Part Number / Description
PDUG-RCXBN242-102D20ST5-D
Amps: 20 (Single Phase)
Volts: 120
kW: 1.9
Receptacles
Type / QTY
5-20R / 24
Breaker
Amperage / QTY
N/A
Plug / Inlet Type
Monitoring (remote)
Dimensions
W x H x D (“)
5-20P Straight-Blade
10’ Cord
•Aggregate: Total Unit (Amps, Volts,
Volt-Amps, Watts, VA, kWh, Power
Factor, Frequency)
0U 66” Vertical
2.00 x 66.25 x 2.25
L5-20P Twist-Lock
10’ Cord
•Aggregate: Total Unit (Amps, Volts,
Volt-Amps, Watts, VA, kWh, Power
Factor, Frequency)
0U 66” Vertical
2.00 x 66.25 x 2.25
6-20P Straight-Blade
10’ Cord
•Aggregate: Total Unit (Amps, Volts,
Volt-Amps, Watts, VA, kWh, Power
Factor, Frequency)
0U 66” Vertical
2.00 x 66.25 x 2.25
L6-20P Twist-Lock
10’ Cord
•Aggregate: Total Unit (Amps, Volts,
Volt-Amps, Watts, VA, kWh, Power
Factor, Frequency)
0U 66” Vertical
2.00 x 66.25 x 2.25
On-Off Switch
No
PDUG-RCXBN242-102D20TL5-D
Amps: 20 (Single Phase)
Volts: 120
kW: 1.9
5-20R / 24
N/A
On-Off Switch
No
PDUG-RCXBN302-102IN6ST6-D
Amps: 20 (Single Phase)
Volts: 208
kW: 3.3
C-13 / 24
C-19 / 6
N/A
On-Off Switch
No
PDUG-RCXBN302-102IN6TL6-D
Amps: 20 (Single Phase)
Volts: 208
kW: 3.3
C-13 / 24
C-19 / 6
N/A
On-Off Switch
No
Detailed monitoring specs available on page 13. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
15
Monitored - Power
Part Number / Description
PDUG-RCXBN243-102D20TL21-D
Amps: 20 (3 Phase)
Volts: 120 / 208 WYE
kW: 5.7
Receptacles
Type / QTY
5-20R / 24
Breaker
Amperage / QTY
N/A
Plug / Inlet Type
Monitoring (remote)
Dimensions
W x H x D (“)
L21-20P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Phase: X Y Z (Amps, Volts, Watts, VA,
kWh, Power Factor)
0U 66” Vertical
2.00 x 66.25 x 2.25
L21-20P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Phase: X Y Z (Amps, Volts, Watts, VA,
kWh, Power Factor)
0U 66” Vertical
2.00 x 66.25 x 2.25
On-Off Switch
No
PDUG-RCXBN308-102IN6TL21-D
Amps: 20 (3 Phase)
Volts: 120 / 208 WYE
kW: 5.7
C-13 / 24
C-19 / 6
N/A
On-Off Switch
No
Detailed monitoring specs available on page 13. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
3 phase units have color-coded receptacle configurations or labeling for easy identification and load balancing.
Part Number / Description
PDUG-RCXB240-103D20TL5-D
Amps: 30 (Single Phase)
Volts: 120
kW: 2.8
Receptacles
Type / QTY
5-20R / 24
Breaker
Amperage / QTY
20 / 2
Dimensions
W x H x D (“)
Plug / Inlet Type
Monitoring (remote)
L5-30P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Circuit/Breaker: (Amps, Volts, Watts,
VA, kWh, Power Factor)
0U 66” Vertical
2.00 x 66.25 x 2.25
L6-30P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Circuit/Breaker: (Amps, Volts, Watts,
VA, kWh, Power Factor)
0U 66” Vertical
2.00 x 66.25 x 2.25
L6-30P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Circuit/Breaker: (Amps, Volts, Watts,
VA, kWh, Power Factor)
0U 66” Vertical
2.00 x 66.25 x 2.25
On-Off Switch
No
PDUG-RCXB240-103D20TL6-D
Amps: 30 (Single Phase)
Volts: 208
kW: 4.9
6-20R / 24
20 / 2 X 2P
On-Off Switch
No
PDUG-RCXB300-103IN6TL6-D
Amps: 30 (Single Phase)
Volts: 208
kW: 4.9
C-13 / 24
C-19 / 6
20 / 3 X 2P
On-Off Switch
No
Detailed monitoring specs available on page 13. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
16
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Monitored - Power
Part Number / Description
PDUG-RCXB243-103D20TL21-D
Amps: 30 (3 Phase)
Volts: 120 / 208 WYE
kW: 8.6
Receptacles
Type / QTY
5-20R / 24
Breaker
Amperage / QTY
20 / 3
Plug / Inlet Type
Monitoring (remote)
Dimensions
W x H x D (“)
L21-30P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Phase: X Y Z (Amps, Volts, Watts, VA,
kWh, Power Factor)
0U 66” Vertical
2.00 x 66.25 x 2.00
L21-30P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Phase: X Y Z (Amps, Volts, Watts, VA,
kWh, Power Factor)
0U 66” Vertical
2.00 x 66.25 x 2.00
On-Off Switch
No
PDUG-RCXB308-103IN6TL21-D
Amps: 30 (3 Phase)
Volts: 120 / 208 WYE
kW: 8.6
C-13 / 24
C-19 / 6
20 / 3
On-Off Switch
No
Detailed monitoring specs available on page 13. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
3 phase units have color-coded receptacle configurations or labeling for easy identification and load balancing.
Part Number / Description
PDUG-RCXW308-106IN6PS15-D
Amps: 60 (3 Phase)
Volts: 208 DELTA
kW: 17.2
Receptacles
Type / QTY
C-13 / 24
C-19 / 6
Breaker
Amperage / QTY
20 / 6 X 2P
Plug / Inlet Type
3P / 4W Pin & Sleeve
10’ Cord
On-Off Switch
Monitoring (remote)
•Aggregate: Total Unit (kWh, Watts)
•Phase: X Y Z (Amps)
•Circuit: XY YZ ZX (Volts, Watts, VA,
kWh, Power Factor)
Dimensions
W x H x D (“)
0U 72” Vertical
2.30 x 72.00 x 3.45
No
Detailed monitoring specs available on page 13. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
3 phase units have color-coded receptacle configurations or labeling for easy identification and load balancing.
Part Number / Description
PDUG-RCXW368-105IT6CS15-35D
Amps: 35 (3 Phase)
Volts: 208 DELTA
kW: 10.0
Receptacles
Type / QTY
C-13 / 30
C-19 / 6
Breaker
Amperage / QTY
20 / 3 X 2P
Plug / Inlet Type
Monitoring (remote)
Dimensions
W x H x D (‘)
3P / 4W (CA Style)
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Phase: X Y Z (Amps) Circuit/Breaker:
•XY YZ ZX (Volts, Watts, VA, kWh,
Power Factor)
0U 70” Vertical
2.00 x 70.00 x 2.25
3P / 4W (CA Style)
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Phase: X Y Z (Amps)
•Circuit: XY YZ ZX (Volts, Watts, VA,
kWh, Power Factor)
0U 72” Vertical
2.30 x 72.00 x 3.45
On-Off Switch
No
PDUG-RCXW308-105IN6CS15-D
Amps: 50 (3 Phase)
Volts: 208 DELTA
kW: 14.4
C-13 / 24
C-19 / 6
20 / 6 X 2P
On-Off Switch
No
Detailed monitoring specs available on page 13. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
3 phase units have color-coded receptacle configurations or labeling for easy identification and load balancing.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
17
Switched
Switched Power
Switched PDUs provide hands-on control remotely. While Monitored PDUs can display information remotely, Switched
units offer the ability to use that information and stay in control of individual power outlets. These PDUs manage whatever issues arise with the click of a few buttons on a smart phone or computer. Also, disable problem equipment by
cutting power to specific outlets, reboot equipment remotely by turning power on and off, and save time and money by
avoiding sending live technicians to the source of the issue.
Feature
Benefit
Remote switching of individual receptacles
Eliminate emergency service calls by rebooting unresponsive equipment via your smart phone
Conserve energy with remote shut down of equipment during non-working hours
Sequential start-up
Avoid power interruptions due to high in rush currents
Equipment start up in desired sequence
Remote circuit level power monitoring
Prevent down-time with early notification of power threshold breaches
2 Remote environmental sensor ports
Monitor temperature, air flow, humidity and dew point via connected sensors
Threshold alarms - remote and local
Convenient notification via e-mail, SNMP traps XML and/or local audible alarm
(RSD for audible)
Remote LCD display (RSD)
Easily viewable power and environmental data
Interfaces with IP web cameras
Visual monitoring of cabinet or computer room
Accessible via any web browser
Easy installation and maintenance - No external software
DCiM software is available and all intelligent units (monitored and switched) have SNMP built in.
18
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Switched
Switched Power Connectivity Diagram
RCM
ETHERNETETHERNETETHERNET
RSD
Remote Display
Temperature, Airflow, Dew point
and Humidity Sensor
Temperature
Sensor
Static IP Address
for set-up and
configuration
Optional Remote Sensors Connect via RJ12
eb
DLink® Web
Enabled Camera
Specifications
• Internal Power Sensors
Volts RMS: 80-280 VAC
Amps RMS: 0-32A
• Ethernet Connection Jack
• Power On Indicator
• Idle Indicator
•
•
•
•
Activity Indicator
Software Reset Button
Remote Display Connection Jack
External Sensor Connection Ports
Two RJ12 Jacks - connect up to 16 Remote Sensors via Splitters
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
19
Switched
Part Number / Description
PDUG-RCMW240-103S15TL5-OD
Amps: 30 (Single Phase)
Volts: 120
kW: 2.8
Receptacles
Type / QTY
5-15R / 24
Breaker
Amperage / QTY
20 / 2
Dimensions
W x H x D (“)
Plug / Inlet Type
Monitoring (remote)
L5-30P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Circuit/Breaker: (Amps, Volts, Watts,
VA, kWh, Power Factor)
0U 70” Vertical
2.50 x 70.00 x 2.25
L6-30P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Circuit/Breaker: (Amps, Volts, Watts,
VA, kWh, Power Factor)
0U 70” Vertical
2.50 x 70.00 x 2.25
On-Off Switch
No
PDUG-RCMW240-103PJ4TL6-OD
Amps: 30 (Single Phase)
Volts: 208
kW: 4.9
C-13 / 20
C-19 / 4
20 / 2
On-Off Switch
No
Detailed monitoring specs available on page 19. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
20
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Switched
Part Number / Description
PDUG-RCMW248-103PK3TL15-OD
Amps: 30 (3 Phase)
Volts: 208 DELTA
kW: 8.6
Receptacles
Type / QTY
Locking
C-13 / 21
Locking
C-19 / 3
Breaker
Amperage / QTY
20 / 3 X 2P
Plug / Inlet Type
Monitoring (remote)
Dimensions
W x H x D (“)
L15-30P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
0U 72” Vertical
•Phase: X Y Z (Amps)
2.50 x 72.00 x 2.25
•Circuit/Breaker: XY YZ ZX (Volts, Watts,
VA, kWh, Power Factor)
L21-30P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Phase: X Y Z (Amps, Volts, Watts, VA,
kWh, Power Factor)
On-Off Switch
No
PDUG-RCMW248-103PK3TL21-OD
Amps: 30 (3 Phase)
Volts: 208 DELTA
kW: 8.6
Locking
C-13 / 21
Locking
C-19 / 3
20 / 3 X 2P
0U 72” Vertical
2.50 x 72.00 x 2.25
On-Off Switch
No
Detailed monitoring specs available on page 19. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
3 phase units have color-coded receptacle configurations or labeling for easy identification and load balancing.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
21
Switched Ultra
Ultra Switched Power
These PDUs provide hands-on control remotely. While Monitored PDUs can display information remotely, Switched
units offer the ability to use that information and stay in control of individual power outlets. They manage whatever
issues arise with the click of a few buttons on a smart phone or computer. Also, disable problem equipment by cutting
power to specific outlets, reboot equipment remotely by turning power on and off, and save time and money by avoiding sending live technicians to the source of the issue. In addition to their switching capabilities, these units have outlet level power monitoring for granular power consumption data of all equipment. Finally, a Max Group Amps (MGA)
feature offers an extra level of protection by preventing circuit overload by letting users set the threshold for maximum
number of amps threshold settings.
Feature
Benefit
Remote switching of individual receptacles
Eliminate emergency service calls by rebooting unresponsive equipment via your smart phone
Conserve energy with remote shut down of equipment during non-working hours
Sequential start-up
Avoid power interruptions due to high in rush currents
Equipment start up in desired sequence
Remote circuit level power monitoring
Prevent down-time with early notification of power threshold breaches
Remote outlet level power monitoring
Monitor and log server power consumption data
Max Groups Amps (MGA)
Prevent circuit overload with group amps threshold settings
2 Remote environmental sensor ports
Monitor temperature, air flow, humidity and dew point via connected sensors
Threshold alarms - remote and local
Convenient notification via e-mail, SNMP traps XML and/or local audible alarm
(RSD for audible)
Remote LCD display (RSD)
Easily viewable power and environmental data
Interfaces with IP web cameras
Visual monitoring of cabinet or computer room
Accessible via any web browser
Easy installation and maintenance - No external software
DCiM software is available and all intelligent units (monitored and switched) have SNMP built in.
22
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Switched Ultra
Switched Ultra Power Connectivity Diagram
RCU
ETHERNETETHERNETETHERNET
RSD
Remote Display
Temperature, Airflow, Dew point
and Humidity Sensor
Temperature
Sensor
Static IP Address
for set-up and
configuration
Optional Remote Sensors Connect via RJ12
eb
a
DLink® Web
Enabled Camera
Specifications
• Internal Power Sensors
Volts RMS: 80-280 VAC
Amps RMS: 0-32A
• Ethernet Connection Jack
• Power On Indicator
• Idle Indicator
•
•
•
•
Activity Indicator
Software Reset Button
Remote Display (RSD2X8) Connection Jack
External Sensor Connection Ports
Jack Two RJ12 Jacks - connect up to 15 Remote Sensors via Splitters
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
23
Switched Ultra
Front View
Rear View
Part Number / Description
PDUG-RCURN082-002L13C20-OD
Amps: 20 (Single Phase)
Volts: 120 or 208
kW: 1.9 or 3.3
Receptacles
Type / QTY
Locking
C-13 / 8 (on rear)
Breaker
Amperage / QTY
N/A
Plug / Inlet Type
C-20
IEC Power Inlet with
Retaining Clamp
On-Off Switch
Monitoring (remote)
•Aggregate: Total Unit (Amps,
Volts, Volt-Amps, Watts, VA, kWh,
Frequency, Power Factor)
•Outlet: (Amps, Volts, Watts, kWh)
Dimensions
W x H x D (“)
1U 19” Horizontal
17.00 x 1.75 x 8.50
No
Detailed monitoring specs available on page 23. | Mounting (p. 41-42): Includes 19” Horizontal Adjustable Bracket.
IEC inlet units allow the PDU to supply 120V or 208V. The voltage distributed is determined by the voltage input.
Part Number / Description
PDUG-RCUBN248-102PK3TL21-OD
Amps: 20 (3 Phase)
Volts: 120 / 208 WYE
kW: 5.7
Receptacles
Type / QTY
Locking
C-13 / 21
Locking
C-19 / 3
Breaker
Amperage / QTY
N/A
Plug / Inlet Type
L21-20P Twist-Lock
10’ Cord
On-Off Switch
Monitoring (remote)
•Aggregate: Total Unit (kWh, Watts)
•Outlet: (Amps, Volts, Watts, kWh)
•Phase: X Y Z (Amps, Volts, Watts,
VA, kWh, Power Factor)
Dimensions
W x H x D (“)
0U 66” Vertical
2.50 x 66.25 x 2.25
No
Detailed monitoring specs available on page 23. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
3 phase units have color-coded receptacle configurations or labeling for easy identification and load balancing.
Part Number / Description
PDUG-RCUW240-103PJ4TL6-OD
Amps: 30 (Single Phase)
Volts: 208
kW: 4.9
Receptacles
Type / QTY
Locking
C-13 / 20
Locking
C-19 / 4
Breaker
Amperage / QTY
Plug / Inlet Type
Monitoring (remote)
20 / 2 X 2P
L6-30P Twist-Lock
10’ Cord
•Aggregate: Total Unit (kWh, Watts)
•Circuit/Breaker: (Amps, Volts, Watts,
VA, kWh, Power Factor)
•Outlet: (Amps, Volts, Watts, kWh)
On-Off Switch
Dimensions
W x H x D (“)
0U 70” Vertical
2.50 x 70.00 x 2.25
No
Detailed monitoring specs available on page 23. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
Part Number / Description
PDUG-RCUW248-103PK3TL21-OD
Amps: 30 (3 Phase)
Volts: 120 / 208 WYE
kW: 8.6
Receptacles
Type / QTY
Locking
C-13 / 21
Locking
C-19 / 3
Breaker
Amperage / QTY
20 / 3 X 2P
On-Off Switch
Plug / Inlet Type
L21-30P Twist-Lock
10’ Cord
Monitoring (remote)
•Aggregate: Total Unit (kWh, Watts)
•Outlet: (Amps, Volts, Watts, kWh)
•Phase: X Y Z (Amps, Volts, Watts,
VA, kWh, Power Factor)
Dimensions
W x H x D (“)
0U 72” Vertical
2.50 x 72.00 x 2.25
No
Detailed monitoring specs available on page 23. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
3 phase units have color-coded receptacle configurations or labeling for easy identification and load balancing.
24
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Switched Ultra
Part Number / Description
PDUG-RCUW248-105PK3CS15-35OD
Amps: 35 (3 Phase)
Volts: 208 DELTA
kW: 10.0
Receptacles
Type / QTY
Locking
C-13 / 21
Locking
C-19 / 3
Breaker
Amperage / QTY
20 / 3 X 2P
Plug / Inlet Type
3P / 4W (CA Style)
10’ Cord
On-Off Switch
Monitoring (remote)
•Aggregate: Total Unit (kWh, Watts)
•Outlet: (Amps, Volts, Watts, kWh)
•Phase: X Y Z (Amps)
•Circuit/Breaker: XY YZ ZX (Volts,
Watts, VA, kWh, Power Factor)
Dimensions
W x H x D (“)
0U 72” Vertical
2.50 x 72.00 x 2.25
No
Detailed monitoring specs available on page 23 | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
3 phase units have color-coded receptacle configurations or labeling for easy identification and load balancing
Part Number / Description
PDUG-RCUB248-106PH6PS15-OD
Amps: 60 (3 Phase)
Volts: 208 DELTA
kW: 17.2
Receptacles
Type / QTY
Locking
C-13 / 18
Locking
C-19 / 6
Breaker
Amperage / QTY
20 / 6 X 2P
Plug / Inlet Type
3P / 4W Pin & Sleeve
10’ Cord
On-Off Switch
No
Monitoring (remote)
•Aggregate: Total Unit (kWh, Watts)
•Outlet: (Amps, Volts, Watts, kWh)
•Phase: X Y Z (Amps)
•Circuit: XY YZ ZX (Volts, Watts, VA,
kWh, Power Factor)
•Breaker: XY XY YZ YZ ZX ZX
(Amps, Volts)
Dimensions
W x H x D (“)
0U 66” Vertical
4.00 x 66.25 x 3.45
Detailed monitoring specs available on page 23. | Mounting (p. 41-42): Includes Full Length Bracket and mounting hardware.
3 phase units have color-coded receptacle configurations or labeling for easy identification and load balancing.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
25
Environmental Monitoring
Environmental Monitoring
Temperature, Humidity and Dew Point are three of the most critical conditions to monitor in computing space. While temperature
is often given moderate attention, relative humidity and dew point levels can often be overlooked. As a site works to decrease
temperature, they may inadvertently decrease humidity below recommended levels. Humidity and dew point have the potential to
create condensation leading to corrosion and the possibility of electrical failures or if relative humidity is too low, static discharges
can cause serious problems.
Part Number
PDUG-GBB15
Feature
Benefit
Power over Ethernet enabled
Does not require power outlet access (PoE injector needed to facilitate PoE function)
On-board temperature sensor
Real-time status and trend data for temperature conditions
On-board dew point and humidity sensor
Real-time status and trend data for humidity and dew point conditions
Threshold alarms
Convenient notification via e-mail, SNMP traps and/or XML
Small profile
Allows you to mount it in tight locations such as wall mounted cabinets
Interfaces with IP web cameras
Visual monitoring of cabinet or computer room
Accessible via any web browser
Easy installation and maintenance - No external software
View data graphs and analyze historical logs
Easy installation and maintenance - No external software
View data graphs and analyze historical logs
DCiM software is available and all intelligent units (monitored and switched) have SNMP built in.
26
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Environmental Monitoring
a
ETHER
DLink® Web
Enabled Camera
NET
Environmental Monitor Connectivity Diagram
Specifications
• Ethernet Connection Jack
• External Sensor Connection Ports
Two RJ12 Jacks - connect up to 4 Remote Sensor
(excluding IOE and Satellite Current monitoring)
• On-board Environmental Sensors
Temperature Range: -4 to 176F
Temperature Accuracy: +/-.09F typical
Humidity: 20% to 80%, +/-2% typical
Dew Point: -35 to 167F, +/-4.5F (20-80%RH)
• Dimensions: 1.50” x 5.25” x 1.50” (HxWxD)
• FCC Part 15 Class A Conformance
• DC Connection Jack
6VDC Power Supply Included
Note
This Environmental Monitor features PoE (Power over Ethernet) is ideal if you are having trouble accessing power but need to
monitor temperature, humidity and dew point. These small modules can be placed discreetly and be up and running within minutes
with only a single ethernet connection for access.
Part Number
PDUG-POI-2000
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
27
Environmental Monitoring
Temperature Monitoring
The Temperature Monitor Plus is well suited for strategic temperature monitoring in tight locations, plus monitoring up to 16
additional external sensors. Choose from a wide variety of external sensors, including web-enabled cameras, to monitor all
critical environmental conditions in your data center.
Part Number
PDUG-RSMINI-P
Feature
Benefit
On-board temperature sensor
On-board temperature sensor Current status and trend data for temperature conditions
RJ12 port
5-port or 16-port splitters to connect up to 16 external sensors
Connect I/O sensors using CCATs to adapt them to RJ12 connections
Threshold alarms
Convenient notification via e-mail, SNMP traps and/or XML
Small profile
Allows mounting in tight locations such as wall mounted cabinets
Interfaces with IP web cameras
Visual monitoring of cabinet or computer room
Accessible via any web browser
Easy installation and maintenance - No external software
View data graphs and analyze historical logs
DCiM software is available and all intelligent units (monitored and switched) have SNMP built in.
28
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Environmental Monitoring
Temperature Monitor Connectivity Diagram
Sp
5-
Po
rt
Water
Sensor
ET
ERN
ET H
litt
er
Internal
Temperature
Sensor
D-Link® Web
Enabled Camera
CC
AT
CC
AT
C
C
AT
Smoke
Alarm Kit
Door
Position
Sensor
Temperature, Airflow,
Dew point and
Humidity Sensor
Temperature
Sensor
Specifications
• Ethernet Connection Jack
• Internal Environmental Sensors
Temperature Range:-40F to 254F
Temperature Accuracy: +/- 1.8F from 40F to 122F
• External Sensor Connection Ports
One RJ12 Jack - connect up to 16 Remote Sensors
• Dimensions: 1.50” x 5.25” x 1.50” (HxWxD)
• FCC Part 15 Class A Conformance
• DC Connection Jack
6VDC Power Supply Included
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
29
Environmental Monitoring
Monitoring Aggregator
Airflow dynamics can create pockets of hot air which adversely affect the performance and life span of your IT equipment. The
monitoring aggregator is ideal for connecting up to 19 sensors in a convenient, 1U device. Satisfy current ASHRAE standards by
monitoring top, middle and bottom cabinet inlet temperatures on up to 5 cabinets with a single monitoring device. Addition of I/O
senors allow additional parameter monitoring of water, smoke or power failure.
Part Number
PDUG-RSMINI163
Feature
Benefit
On-board temperature sensor
Current status and trend data for temperature conditions
Automatically begins logging data as soon as the unit is powered up
3 I/O sensor ports
Ability to monitor contact closure devices or scale 0-5V signals
16 Remote climate RJ12 sensor ports
Eliminate the use of splitters
Monitor temperature, airflow, humidity and dew point via connected sensors
Threshold alarms
Convenient notification via e-mail, SNMP traps and/or XML
Interfaces with IP web cameras
Visual monitoring of cabinet or computer room
Accessible via any web browser
Easy installation and maintenance - No external software
View data graphs and analyze historical logs
DCiM software is available and all intelligent units (monitored and switched) have SNMP built in.
30
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Environmental Monitoring
Monitoring Aggregator Connectivity Diagram
Optional Remote Sensors Connect via I/O Port
Door Position Sensor
Temperature
Sensor
Smoke Alarm Kit
Temperature, Airflow,
Dew point and
Humidity Sensor
Water Sensor
Power Fail Monitor
Static IP Address
for set-up and
configuration
D-Link® Web
Enabled Camera
Optional Remote Sensors Connect via RJ12
ETHERNETETHERNETETHERNETETHERNETETHERNETETHERNET
Specifications
•
•
•
•
•
Ethernet Connection Jack
• Software Reset Button
Power On Indicator
• FCC Part 15 Class A Conformance
Idle Indicator
• External Sensor Connection Ports
Activity Indicator
16 RJ12 Jacks - add up to 16 Remote Sensors
Dimensions: 1.61” x 17.00” x 1.61” (HxWxD)
Three I/O Ports- 0-5 VDC analog or contact closure
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
• Internal Environmental Sensors
Temperature Range: -40F to 254F
Temperature Accuracy: +/- 1.8F from 40F to 122F
• DC Connection Jack
6VDC Power Supply Included
31
Environmental Monitoring
Environmental Monitoring Plus
IT managers must operate equipment within a fairly narrow temperature range to ensure reliable long lasting computer and network
gear. Server failure rates are known to increase as the temperature rises above the manufacturer’s set parameters. Humidity, airflow,
water and security all introduce potential points of failure if not closely monitored and controlled. The Environmental Monitor Plus
can address each of these threats and more with 5 internal sensors and expansion capacity for up to 16 remote sensors. Lights out
site managers around the world rest easier knowing they have access to a clear picture of their environmental conditions and will be
alerted with ample time to respond to critical conditions before they become detrimental.
Part Number
PDUG-RSE-B
Feature
Benefit
5 On-board environmental sensors
Current status and trend data for environmental conditions including temperature, relative humidity, airflow, light and sound
3 I/O sensor ports
Ability to monitor contact closure devices or scale 0-5V signals
5 Remote climate sensor ports
Add additional temperature, airflow, humidity and dew point sensors
Threshold alarms
Convenient notification via e-mail, SNMP traps and/or XML
Interfaces with IP web cameras
Visual monitoring of cabinet or computer room
Accessible via any web browser
Easy installation and maintenance - No external software
View data graphs and analyze historical logs
DCiM software is available and all intelligent units (monitored and switched) have SNMP built in.
32
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Environmental Monitoring
Environmental Monitor Plus Connectivity Diagram
Optional Remote Sensors Connect via I/O Port
Door Position Sensor
Smoke Alarm Kit
Temperature
Sensor
Water Sensor
Temperature, Airflow,
Dew point and
Humidity Sensor
Power Fail Monitor
Static IP Address
for set-up and
configuration
D-Link® Web
Enabled Camera
Optional Remote Sensors Connect via RJ12
ETHERNETETHERNETETHERNETETHERNETETHERNETETHERNET
Specifications
•
•
•
•
•
•
Ethernet Connection Jack
Power On Indicator
Idle Indicator
Activity Indicator
Dimensions: 1.61” x 17.00” x 1.61” (HxWxD)
DC Connection Jack
6VDC Power Supply Included
• Software Reset Button
• External Sensor Connection Ports
Five RJ12 Jacks - add up to 16 Remote Sensors
Three I/O Ports - 0-5 VDC analog or contact closure
• Cable Management Brackets Attached
• FCC Part 15 Class A Conformance
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
• Internal Environmental Sensors
Temperature Range: -40F to 254F
Temperature Accuracy: +/- .9F from 50F to 185F
Humidity: 0-100%, +/- 5%
Airflow: 0-99, relative
Sound Level: 0-99, relative
Light Level: 0-99, relative
33
Environmental Monitoring
Environmental Monitoring + Display
Comprehensive environmental monitoring is crucial to providing a reliable and stable data center. Round the clock measurements
facilitate trend and pattern analysis. This data will reveal use patterns which vary with time of day and day of week as well as
uncover adverse affects caused by equipment modifications within the cabinet. Detailed information can provide opportunity
for energy savings in addition to the maximization of uptime. Within minutes of connecting the Environmental Monitor + Display
you will have temperature, humidity, airflow, sound level and light level readings at your finger tips. Additionally the local display
can simplify moves, adds and changes by providing instantaneous feedback to the installer.
Part Number
PDUG-RSE2X16
Feature
Benefit
On board scrolling display
Provides local reading of user selected critical data
5 On-board environmental sensors
Current status and trend data for environmental conditions including temperature, relative humidity, airflow, light and sound
3 I/O sensor ports
Ability to monitor contact closure devices or scale 0-5V signals
5 Remote climate sensor ports
Add additional temperature, airflow, humidity and dew point sensors
Threshold alarms
Convenient notification via e-mail, SNMP traps and/or XML
Interfaces with IP web cameras
Visual monitoring of cabinet or computer room
Accessible via any web browser
Easy installation and maintenance - No external software
View data graphs and analyze historical logs
DCiM software is available and all intelligent units (monitored and switched) have SNMP built in.
34
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Environmental Monitoring
Environmental Monitor + Display Connectivity Diagram
Optional Remote Sensors Connect via I/O Port
Door Position Sensor
Smoke Alarm Kit
Temperature
Sensor
Water Sensor
Temperature, Airflow,
Dew point and
Humidity Sensor
Power Fail Monitor
Static IP Address
for set-up and
configuration
D-Link® Web
Enabled Camera
Optional Remote Sensors Connect via RJ12
ETHERNETETHERNETETHERNETETHERNETETHERNETETHERNET
Specifications
•
•
•
•
•
•
•
Ethernet Connection Jack
Power On Indicator
Idle Indicator
Activity Indicator
LCD Display
Audible Alarm
Dimensions: 1.61” x 17.00” x 1.61” (HxWxD)
• Software Reset Button
External Sensor Connection Ports
Five RJ12 Jacks - add up to 16 Remote Sensors
Three I/O Ports - 0-5 VDC analog or contact closure
• Cable Management Brackets
• FCC Part 15 Class A Conformance
• DC Connection Jack
6VDC Power Supply Included
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
• Internal Environmental Sensors
Temperature Range: -40F to 254F
Temperature Accuracy: +/- .9F from 50F to 185F
Humidity: 0-100%, +/- 5%
Airflow: 0-99, relative
Sound Level: 0-99, relative
Light Level: 0-99, relative
35
Environmental Monitoring
Environmental Monitoring + Relays
Data center managers are faced daily with the task of keeping servers cool enough to perform optimally in order to reduce energy
wasted by over cooling. To succeed at this delicate balancing act, managers must collect strategic environmental data and have
a rapid means to respond to changes in conditions. The Environmental Monitor + Relays provides IT managers with the information and tools needed to minimize excess cooling and maximize uptime. Remote sensors selected for your specific installation are
monitored and alarmed based on user defined thresholds. Relay control actions are configured to respond to conditions which are
outside acceptable ranges. Site managers can circumvent overheating through event trigger actuation of air conditioners, vents or
sirens for audible alarming. These simple and timely precautions optimize energy efficiency.
Part Number
PDUG-RSO
Feature
Benefit
On board scrolling display
Provides local reading of user selected critical data
On-board temperature sensor
Current status and trend data for temperature conditions
6 I/O sensor ports
Ability to monitor contact closure devices or scale 0-5V signals
4 Remote climate sensor ports
Add additional temperature, airflow, humidity and dew point sensors
3 Internal control relays
Control external devices such as air conditioners, heaters, vents, sirens, etc. to counteract unacceptable site conditions
Threshold alarms
Convenient notification via e-mail, SNMP traps and/or XML
Interfaces with IP web cameras
Visual monitoring of cabinet or computer room
Accessible via any web browser
Easy installation and maintenance - No external software
View data graphs and analyze historical logs
DCiM software is available and all intelligent units (monitored and switched) have SNMP built in.
36
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Environmental Monitoring
Environmental Monitor + Relay Connectivity Diagram
Optional Remote Sensors Connect via I/O Port
Door Position Sensor
Smoke Alarm Kit
Temperature
Sensor
Water Sensor
Power Fail Monitor
Static IP Address
for set-up and
configuration
Temperature, Airflow,
Dew point and
Humidity Sensor
D-Link® Web
Enabled Camera
Optional Remote Sensors Connect via RJ12
ETHERNETETHERNETETHERNETETHERNETETHERNETETHERNET
Specifications
•
•
•
•
•
•
•
Ethernet Connection Jack
Power On Indicator
Idle Indicator
Activity Indicator
LCD Display
Audible Alarm
Dimensions: 1.61” x 17.00” x 2.50” (HxWxD)
• Software Reset Button
• External Sensor Connection Ports
Four RJ12 Jacks - add up to 16 Remote Sensors
• Six I/O Ports - 0-5 VDC analog or contact closure
Three Internal Control Relays - DC: 60V, 30W
AC: 30VRMS, 1A
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
• Internal Environmental Sensors
Temperature Range: -40F to 254F
Temperature Accuracy: +/- 1.8 from 40F to 122F
• DC Connection Jack
6VDC Power Supply Included
• FCC Part 15 Class A Conformance
37
Environmental Monitoring Accessories
RJ Port Sensors
These optional remote sensors connect via RJ12 ports.
Temperature Sensor
Precisely monitor “hot spots” throughout your installation.
• Temperature: -40F to 254F
• Temperature Accuracy: +/- 1.8F from 40F to 122F
• 12’ Cord
Part Number
PDUG-SRT-12
Temperature, Airflow, Humidity and Dew Point Sensor
Monitor four environmental conditions in this single cord sensor. Ideal
for placement near air intake (coldest/driest conditions) and air exhaust
(warmest/moistest conditions).
•
•
•
•
•
Temperature: -40F to 254F
Temperature Accuracy: +/- .9F from 50F to 185F
Airflow ow: 0-99 - relative
Humidity: RH Accuracy +/- 2% RH, Range: 0 to 100 % RH, non-condensing
12’ Cord
Part Number
PDUG-RTAFHD3-12
RJ12 5-Port Splitter
Expand the number of sensors connected to your PDU with RJ12
sensor ports. Especially ideal for compact units such as the Temperature
Monitor Plus.
Part Number
PDUG-SP-5
38
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Environmental Monitoring Accessories
I/O Port Sensors
These optional remote sensors connect via I/O port or CCAT.
Door Position Sensor Magnetic Switch 0-99 - relative
Monitor cabinet door position -open vs. closed- with this magnetic sensor.
Set alarms to alert when a secure cabinet has been opened. (30’ Cord)
Part Number
PDUG-RDPS
Water Sensor 0-99 - relative
Acts as a conductivity bridge to detect the presence of moisture or water
in your facility. (20’ Cord)
Part Number
PDUG-RWS
Smoke Alarm Kit 0-99 - relative
Integrate smoke alarm functionality into your system and receive remote
alarm notification. Kit features Kidde® 1275 with interface module and
5-15P straight-blade plug.
Part Number
PDUG-SA-1
Power Fail Monitor 0-99 - relative
This sensor is connected directly to your utility power feed to alert you
when utility power has been affected. Ideal for down-time prevention when
PDUs are connected directly to a UPS. Notification of a possible outage
prior to UPS battery exhaustion is critical. Power supply included. (100’ cord)
Part Number
PDUG-RCP-2-100 US
I/O to RJ Remote Sensor Converter
This handy accessory enables connection of I/O devices into RJ12 jacks.
Device is programmed for the specific sensor and available for use with I/O
remote sensors.
Part Number
PDUG-CCAT-Digital
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
39
Environmental Monitoring Accessories
I/O Port Water Sensing Cable Kits
With the advent of liquid cooling in data centers, water has become increasingly integrated into the computer room environment.
Water Sensing Cable Kits feature detection cables which sense the presence of water along the entire cable length. These
kits are ideal for detecting moisture over a wide area such as the perimeter of a group of racks and cabinets. When connected
to PDU’s with I/O ports, you can be alerted to potential dangers via e-mail or SNMP traps. Select from one of two kits.
Specifications
•
•
•
•
•
Plenum Rating: CL2P/CMP C(UL)
Sheer Strength: >180 lbs.
Cut Resistance: >40 lbs. with .005” blade
Abrasion Resistance: 60 cycles per UL 719
Connector: 4 pin, 0.96” diameter
Operating Environment
•
•
•
•
•
•
Temperature: 32º to 167ºF
Humidity: 5% to 95% RH, non-condensing
Altitude: 10,000 ft. max.
Storage: -22º to 185ºF
Diameter of cable: not more than 0.25”
Weight: .02 lbs/ft
Water Sensing Cable Kit Application
Top View of Server Room Floor
Water Alarm
To I/O
Interface
Box
Fault Alarm
EOL Terminator Plug
Leader
Cable
Water Sensing Cable
6 VDC
Power
Supply
J-Clips
Part Number
Kit Contents
Part Number
Kit Contents
PDUG-WSCK-10
Interface Box
PDUG-WSCK-40
Interface Box
40
15’ Leader Cable
15’ Leader Cable
10’ Leak Detection Cable with EOL (end of line) connector
40’ Leak Detection Cable with EOL (end of line) connector
Power Supply (6’ length)
Power Supply (6’ length)
50’ Connection Wire (interface box to I/O port)
50’ Connection Wire (interface box to I/O port)
J Clips (10 pack)
J Clips (25 pack)
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Vertical Mounting Brackets
Spring Clips
Included with each 18” and 48” vertical unit. Attach the spring clips to
the cabinet making sure the top clip is no more than 1 inch from the
top of the unit. Once the spring clips are secure, snap the PDU into
position. Stand off brackets are included.
Full Length Bracket
Included with each 66”, 70” and 72” vertical unit. Easily mounts
to the struts inside of the cabinet. Allows up to 180° rotation on
most PDUs.
A
B
Mini “L” Brackets
Included with 17” vertical units for vertical mounting. Turned into the
unit, these brackets are ideal for rack rail mounting. Turned away
from the unit, they extend your mounting options by 8”.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
41
Horizontal Mounting Brackets
19” Horizontal Adjustable Brackets
Included with 19” horizontal units. These steel brackets allow
numerous recess and flush mounting options.
42
19” Horizontal Brackets
Included with 17” vertical units for horizontal mounting. These versatile
brackets allow for 19” flush rack mounting.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Reference
What is an Amp?
An Amp (or Ampere) is the standard measure of electrical current. Much like water flowing through a pipe, the Amp is a measure of how much
electricity is moving through a wire at a given time. The Amp draw of a circuit is dependent on the needs of the devices plugged into it, and is
limited by the branch circuit protection.
What is a Volt?
A Volt is the standard measure of electrical potential and a fixed value for every circuit. Voltage is measured with respect to a reference point
(usually between the two respective conductors of the circuit). Voltage is analogous to pressure in a water pipe. Higher pressures, or higher
voltages, allow more energy to flow within a given amount of time for a given wire size.
What is a Watt?
A Watt is the measure of total work performed by the energy consumed in a system. The calculation is: Watts = Volts x Amps x Power Factor.
What is Energy?
Energy is electricity as a raw material, measured in Volts and Amps available to do work.
What is AC?
Alternating Current, or AC, is energy delivered in a form that can travel the long distances necessary from generating plants to homes and
businesses. The term AC reflects the fact that the voltage and current are always changing in value, or alternating between a positive and
negative threshold over a centerline.
What is DC?
Direct Current, or DC, is energy that does not alternate over a fixed period of time, but rather has a steady value with reference to zero.
DC does not travel great distances well.
What is Apparent Power?
Apparent Power is the instantaneous calculation of Volts x Amps.
What is Power Factor?
Power Factor is the ratio of Real Power to Apparent Power. Its value ranges from 0 to 1. A value of 1, or 100% is unity power. Lower values
of Power Factor indicate that the circuit is wasting energy. Any difference between the RMS value of Watts and the Volt-Amps value indicates
inefficiencies in the way power is being used by the equipment on the circuit.
What does RMS mean?
RMS stands for Root-Mean-Squared. It is used in conjunction with AC Volts and AC Amps to express an average value. A true RMS calculation takes into account the shape and phases of the wave forms being delivered to a circuit. AC voltage and current are ever-changing values.
Using RMS measurements provides useful values.
What rating should I use to correctly select a PDU for my installation?
There are several factors to consider when selecting a PDU to ensure that the PDU has sufficient capacity for the intended application.
The three main factors to consider are:
• NAMEPLATE: The nameplate rating marked on a PDU is the intended operating voltage range and maximum operating input current.
Nameplate ratings are based on both regulatory requirements and design factors and represent the continuous total current that the PDU
will be able to deliver to a load. The PDU should not be installed in an application where the nameplate ratings are exceeded.
• RECEPTACLE: The PDU’s output power is connected to information technology equipment through either NEMA or IEC receptacles. The
PDU should not be installed in a manner that will exceed the maximum current rating of any individual receptacle. For example, a NEMA
5-15R receptacle should not be loaded to over 15A regardless of the nameplate rating of the PDU it is installed in.
• INTERNAL BREAKERS: Our PDUs can be equipped with internal circuit breakers that are used to protect the circuit in case of overload or
earth fault conditions. For PDUs rated 12A or 16A, the circuit breakers are optional components that act as supplementary protectors. For
PDUs rated higher than 16A, the circuit breakers are required components that provide primary overcurrent and earth fault protection for the
PDU’s internal circuits. The PDU should not be connected to a load that will exceed the current rating of an internal breaker. For maximum
protection against nuisance tripping, it is recommended that internal breakers are only loaded to 80% of the breaker current rating.
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
43
Reference
Why are the cord-connected units listed with a de-rated Amperage?
Our cord-connected PDUs carry a nameplate current rating that is 80% of the branch circuit rating listed in the catalog specification. The nameplate
current rating has been lowered in order to comply with UL®/NEC requirements.
Can I purchase a PDU without a circuit breaker?
Yes, some configurations can be purchased without an internal circuit breaker. All PDUs require an appropriately sized branch circuit breaker in
the building installation. Branch circuit breakers should be sized according to the PDUs namplate rating, and electrical code requirements. To
comply with the NEC the circuit breaker in the building installation should have a trip current rating that is 25% higher than the PDU’s nameplate.
For example, a 16A rated PDU requires a 20A circuit breaker.
What are the benefits of utilizing two 20A breakers versus two 15A breakers on a 30A PDU?
20A breakers in a 30A unit allow maximum flexibility of load connection without nuisance tripping. The receptacles in a 30A PDU are divided
into two independent groups. A 30A PDU distributing to 15A or 20A receptacles must be broken down into either 15A or 20A circuits internally.
By opting for 20A internal circuits, PDU circuit balance is less critical. One circuit may be loaded to >15A. This would not be possible if each
breaker were rated at 15A.
What are the advantages of bringing 3 Phase power to my cabinet?
• Less wire under the floor improves airflow and reduces wiring confusion. A 20A 3 Phase installation contains 5 wires where the equivalent single
phase system would require 9 wires (3x3).
•
Fewer whips to pull save you time and money. A 3 Phase system has one whip for the electrician to bring to the cabinet where the equivalent
single phase system would have 3 whips. This saves both material and labor cost.
•
Simplified load balancing reduces technician installation and troubleshooting time. With all 3 Phases available in a single cabinet, load balancing can be achieved at the cabinet level where similar type equipment is often found. In a single phase system, a minimum of 3 cabinets may
need to be looked at to balance the same load.
Why should I consider designing my installation with 208V instead of 120V?
The electrical power consumption of electrical appliances is measured in Watts (W). Wattage (Watts value) is a product of the rated Voltage (V) and
Current (I). W = V x I. The higher the Voltage the lower the current required to supply the same Watts. The same size wire can carry nearly 2x as
much power (Watts) @ 208V versus 120V. A Voltage of 208V instead of 120V, yields 1.73 times more power.
Can you distribute both 120V and 208V from a PDU with a single input cord?
PDUs with 3 Phase WYE input allow for the option of distributing 120V and 208V in a single power strip. 3 phase WYE consists of 3 Phases, 1
Neutral and 1 Ground conductor. 208V output is achieved across two phase conductors and 120V output is achieved across one phase conductor
and the neutral conductor.
44
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
Plug & Receptacle Configuration Chart
Power Distribution Units (PDUs) | www.crenlo.com/emcor | 507-287-3535 | CRN.4015.03.17
45
Emcor Product Portfolio
Emcor® Enclosures
This standard product lineup includes a range of vertical racks and cabinets, which can be
configured or modified with numerous accessories and sizes to meet your diverse needs.
ESQ®
G-Series®
10 Series®
Data Center
Emcor® Consoles
This standard product lineup includes a range of monitoring and control consoles,
which can be configured and modified in countless modular configurations.
FP1
FP2
ESQ®
Air Traffic Control
Custom Products
For those needs that fall outside of Crenlo’s standard Emcor products, we
can build completely custom solutions to meet the needs of any customer.
Inverter Enclosure
Kiosk
NEMA
Package Drop Box
Crenlo I 1600 4th Avenue NW I Rochester, MN 55901
507-289-3371 I www.crenlo.com | CRN.4015.03.17
© 2015 Crenlo Cab Products, Inc. All Rights Reserved. Crenlo® and the Crenlo® Logo are registered trademarks in the United States [and various other countries] of Crenlo Cab Products, Inc.
© 2015 Emcor Enclosures, Inc. All Rights Reserved. Emcor®, 10 Series®, G-Series®, ESQ® and Compudesk® are registered trademarks in the United States [and various other countries] of Emcor Enclosures, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising