Emergency lighting units Batteries NiCd Battery pack 1.6
Emergency lighting units
Batteries
NiCd Battery pack 1.6 – 4.5 Ah
Nickel-cadmium cells (NiCd)
Product description
•High-temperature NiCd battery pack for use
with emergency lighting units
•4-year design life
•1-year guarantee
Properties
•Good charging properties at high temperature
•High energy maintenance of the charged battery
•Certified quality manufacturer
Fig. 1
•Casing material made of polycarbonate
•1.0 m integrated double-insulated cable
•1.0 mm² solid wire
•Complies with IEC 61951-2 (constant charging load test)
•Suitable for emergency lighting equipment as per IEC 60598-2-22
È
Standards, page 4
Fig. 2
Fig. 3
Fig. 4
Data sheet 10/15-EM010-13
Subject to change without notice.
www.tridonic.com
1
Emergency lighting units
Batteries
37
NiCd Battery pack 1.6 – 4.5 Ah
Nickel-cadmium cells (NiCd)
1000
37
Fig. 1
200±5
34
Fig. 2
70
70
4,2
152
200±5
Fig. 3
Data sheet 10/15-EM010-13
Subject to change without notice.
www.tridonic.com
2
25
Emergency lighting units
Batteries
50
50
4,2
119
200±5
Fig. 4
Technical data
Battery voltage per cell
1.2 V
Cell temperature (for a life of 4 years)
0 ... +55 °C
Casing temperature tc
0 ... +45 °C
Temperature range of battery (NiCd) at tc point
0 ... +40 °C
Ordering data
Article number
Packaging,
carton
Packaging,
outer box
Weight
per pc.
Pack-NiCd 3C
89899676
5 pc(s).
25 pc(s).
0.302 kg
Pack-NiCd 4C
89899677
5 pc(s).
25 pc(s).
0.342 kg
Pack-NiCd 5C
89899678
5 pc(s).
25 pc(s).
0.390 kg
Pack-NiCd 6C
89899679
5 pc(s).
25 pc(s).
0.430 kg
Pack-NiCd 3C CON
28001221
5 pc(s).
10 pc(s).
0.200 kg
Pack-NiCd 4C CON
28001222
5 pc(s).
10 pc(s).
0.250 kg
Pack-NiCd 3D CON
89800389
5 pc(s).
10 pc(s).
0.534 kg
Pack-NiCd 4D CON
89800390
5 pc(s).
10 pc(s).
0.661 kg
Pack-NiCd 5D CON
28001181
5 pc(s).
10 pc(s).
0.840 kg
Pack-NiCd 6D CON
89800391
5 pc(s).
10 pc(s).
0.990 kg
Type
Battery pack 1.6 Ah
Battery pack 1.8 Ah
Battery pack 4.5 Ah
Spezific technical data
Type
Article number
Figure
Number of cells
Capacity
Dimensions
Battery pack 1.6 Ah
Pack-NiCd 3C
89899676
1
3
1.6 Ah
216 x 70 x 37 mm
Pack-NiCd 4C
89899677
1
4
1.6 Ah
216 x 70 x 37 mm
Pack-NiCd 5C
89899678
1
5
1.6 Ah
216 x 70 x 37 mm
Pack-NiCd 6C
89899679
1
6
1.6 Ah
216 x 70 x 37 mm
Pack-NiCd 3C CON
28001221
4
3
1.8 Ah
119 x 50 x 25 mm
Pack-NiCd 4C CON
28001222
4
4
1.8 Ah
119 x 50 x 25 mm
Pack-NiCd 3D CON
89800389
3
3
4.5 Ah
152 x 70 x 34 mm
Pack-NiCd 4D CON
89800390
3
4
4.5 Ah
152 x 70 x 34 mm
Pack-NiCd 5D CON
28001181
2
5
4.5 Ah
216 x 70 x 37 mm
Pack-NiCd 6D CON
89800391
2
6
4.5 Ah
216 x 70 x 37 mm
Battery pack 1.8 Ah with connector
Battery pack 4.5 Ah with connector
Data sheet 10/15-EM010-13
Subject to change without notice.
www.tridonic.com
3
Emergency lighting units
Batteries
Standards
The battery cells are designed to comply with the IEC international standard and
tested according to the normative permanent charge endurance test described in
the IEC 61951-2 standard. This performance is mandatory for use in Emergency
Lighting Units to comply with the IEC 60598 2.22.
Technical data Accu
Capacity Cs
Rated minimum capacity
Typical weight per cell
Cell dimensions:
• Diameter
• Height
1.6 Ah / 1.8 Ah / 4.5 Ah
45 g / 45 g / 124 g
22.5 mm / 22.5 mm / 32.5 mm
42.5 mm / 42.5 mm / 60.5 mm
Consult individual emergency module data sheet for maximum allowable temperatures.
Mechanical details
Battery pack 1.6 Ah
Battery leads
Pre-assembled length: Wire type: 1 m double insulated lead
1 mm2 solid wire, UL 1015, from -20 °C to 105 °C, 600 V
Module end termination
9.0 mm stripped insulation insulated with a shrink-on tube.
Battery pack 1.8 Ah / 4.5 Ah
Battery leads
Pre-assembled length: 0.2 m double insulated lead with connector on side of the battery pack
0.8 m double insulated lead on one side with connector
Module end termination
9.0 mm stripped insulation
Technical data housing
Glow-wire test according to EN60598-1 with increased temperature of 960 °C
passed.
Storage
•Store batteries within the specified temperature range in low
humidity conditions. Optimal storage conditions are:
– temperature: +5 ... +25 °C
– humidity: 65 % ±5 %
•Avoid atmosphere with corrosive gas
•Disconnect batteries before store or delivery
•Avoid storage of discharged batteries
•A long term storage in open circuit leads to battery self discharge and
deactivation of chemical components. It could be required to charge and
discharge the batteries a few times to recover the initial performance.
Additional information
Additional technical information at
www.tridonic.com → Technical Data
Guarantee conditions at
www.tridonic.com → Services
No warranty if battery pack was opened.
Safety
•Do not short-circuit the battery pack – when installing the luminaire make sure
sharp edges do not come into contact with cables.
•Do not open or damage the battery pack or throw it into a fire.
•Protect the battery against moisture and keep away from water.
•Do not expose the battery to direct sunlight or excessive heat (see storage conditions).
•Transport and store the battery only in its original packaging.
•Comply with the transport conditions of the transport company.
•Follow the instructions on the safety data sheets.
Damage/improper use
If the battery is damaged or user incorrectly vapours and liquids may
escape from it. If you come into contact with battery fluid wash immediate
with water and seek medical assistance if necessary.
Disposal
•Do not dispose of batteries with normal waste.
•Comply with local regulations when disposing of batteries.
Data sheet 10/15-EM010-13
Subject to change without notice.
www.tridonic.com
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising