Camera Wizard TM Camera Wizard II

Camera Wizard TM Camera Wizard II
Camera
Wizard II
TM
IP AND CCTV CAMERA TESTER
12 IP AND CCTV CAMERA TESTS !
IP CAMERA TESTS:
Port flicker: Blink a port’s link LED to identify cable location
IP address scan: Scan IP cameras and network device’s for IP address
Link monitor: Displays all IP addresses for a given gateway
PING test: Contacts and and test link for entered IP address
POE tester: Displays PoE voltage
CAT5/6 cable tester.: Performs a pairs test on CAT5/6 cables
Note: IP video image is not displayed on LCD
CCTV CAMERA TESTS:
Video image display: 3.5" LCD with 960x240 resolution
Video signal level meter: Display peak to peak value
PTZ camera controls for numerous camera types
RS485/RS422 input and data logging
3.5mm audio input
Built in speaker
Color bar signal generator
BNC input with 3' M-to-M BNC pigtail
POWER AND ACCESSORIES:
Up to 12 hour battery life
4 hour recharge time
12VDC 1A output to power camera with 3' pigtail
5VDC 2A AC adaptor powers and charges tester
Li-ion 3.7V 3000mAh rechargeable battery
Carrying case included
FINDS THE CAMERA’S IP ADDRESS !
IP Answer Stick
VTX455
TM
Connect your Notebook to a PoE Powered Device
ALIGN / FOCUS AN IP CAMERA ON THE JOBSITE
CONFIGURE A ROUTER AT THE ROUTER LOCATION
CONFIGURE AN ACCESS POINT AT ITS LOCATION
AND AT THE SAME TIME
IP DEVICE POWER
>15 WATTS
MONITOR PoE VOLTS, WATTS
AND LINK ACTIVITY
> 10 WATTS
5 - 10 WATTS
< 5 WATTS
OFF
CONNECT IP CAMERA HERE
(OR OTHER IP DEVICE)
ACTIVITY LED
POE VOLTS
> 50 VOLTS
40 - 50 VOLTS
< 40 VOLTS
CONNECT NOTEBOOK HERE
TO ALIGN,
FOCUS AND CONFIGURE
THE IP DEVICE
IPAS10
CONNECT
PoE SOURCE HERE
CONNECT
PoE POWER
POWER
SOURCE
(POE SWITCH ORHERE
INJECTOR)
(POE SWITCH OR INJECTOR)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising