Visio-08280620 Rev0408.vsd
INSTALLATION INSTRUCTIONS
14-2 SEVEN DAY PROGRAMMABLE TIMER
Setting the Day of the Week and the Time
To set the day of the week:
1. Press the CLOCK key and the DAY key. The day of the week will change.
2. Release both keys when the correct day is shown. The day of the week will be set.
To set the hour of the day:
1. Press the CLOCK key and the HOUR key. The hour digits and AM/PM will change.
2. Holding the CLOCK and HOUR keys for more than 3 seconds, will cause the digits to change faster.
3. Release both keys when the hour and AM/PM indicators are correct. The hour will be set.
To set the minute digits:
1. Press the Clock key and the MIN key. The minute digits will change.
2. Holding the CLOCK and the MIN keys for more than 3 seconds will cause the digits to change faster.
3. Release both keys when the correct minute digits are shown. The minutes will be set.
NOTICE: Setting the hour and minute digits will reset the seconds digits to zero.
Setting the programs ON/OFF times:
1. Press the TIMER key to enter into the Program mode.
2. The “1” and the “ON” indicators mean that the “ON” time for program #1 can be set.
3. Press the DAY key to select the day(s) of the week.
Individual Days:
MO; TU; WE; TH; FR; SA; or SU
Week Days Only: MO + TU + WE + TH + FR
Weekends Only:
SA + SU
Every Day:
MO through SU
4. Press the HOUR key to set the “ON” time hour of the day including AM/PM.
5. Press the MIN key to set the “ON” time minutes of the hour.
6. After setting the Program #1 “ON” time and day. Press the TIMER key to set the Program #1 “OFF” time and day. The “1” and the “OFF”
indicators mean that the “OFF” time for Program #1 can be set.
7. Repeat steps 3 to 5 for Program #1 “OFF” setting. (Time and Day)
8. After setting Program #1 “ON” and “OFF” times, repeat steps 1 to 7 to set the “ON” and “OFF” times for Programs #2 through #6.
9. Press the CLOCK key to return to the present time and day of the week display.
Resetting the 14-2 timer.
To Reset the Timer unit, press the small RESET button.
Warning: Reset will clear all previous time and program settings.
Selecting the Automatic or Manual Mode of Operation.
Pressing the MANUAL key will move the selector bar to either the ON, AUTO or OFF position. Manually turning on the 14-2 timer will not change the
programmed settings for program #1 to #6.
1. with the selector bar in the AUTO position, the output contacts will turn on and off according to the programmed settings (Programs #1 to #6).
2. Moving the selector bar from AUTO to ON will manually turn on the output contacts. The Normally Open (N/O) contacts #3 and #5 will close and
the Normally Closed (N/C) #3 and #4 will open and the LED indicator will turn on.
3. Moving the selector bar from AUTO to OFF will manually turn off the output contacts.
Electrical Ratings for the 14-2 Timer:
Timer Input Voltage: 14-2-12: 12VAC/12VDC ; 50mA Max. (Pins #1 and #2)
14-2-24: 24VAC/24VDC; 50mA Max. (Pins #1 and #2)
Output Contact Rating: SPDT; 16Amps (Resistive load) @ 30 volts AC, DC
Common
Normally Closed
Normally Open
(Com) – Pin #3
(N/C) - Pin #4
(N/O) - Pin #5
Wiring diagram also on back of 14-2 Timer unit.
08280620 Rev.04/08
1
2
AC/DC
INPUT
3
COM
4
5
N/C N/O
PAGE 1 OF 2
LCD Display
LED Power Indicator
High Current SPDT Relay Output
24 Hour Format
12 Programmable Time Periods (Single Days, Mon-Fri, Weekly, Weekends)
12 Programmable Actions (6-ON, 6-OFF) per Time Period
Manual Button for ON/OFF Override
Power Supply: 12/24 VDC/VAC
Contact Rating: 16 Amps (resistive load) @ 30 volts AC/DC
Program Resolution: 1 Minute
Timing Resolution: 1 Minute
12 or 24
VDC
POWER
SUPPLY
12 or 24
VDC
POWER
SUPPLY
+
1
+
2
-
3
4
5
COM N/C N/O
14-2 TIMER
-
FAIL
SAFE
LOCK
+
1
+
2
-
FAIL
SECURE
LOCK
3
4
5
COM N/C N/O
14-2 TIMER
1. Installation must be according to wire diagram. Please see the back of the unit.
2. Press RESET button before use.
3. Recharge the battery
08280620 Rev.04/08
PAGE 2 OF 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising