Product list Machine Safety

Product list Machine Safety
Product list
Machine Safety - Jokab Safety products
Contents
Programmable Safety Controller
Control devices
20
Pluto3
3
Safeball – One hand devices
20
Accessories for Programmable Safety Controllers
Safeball – Two hand devices
20
JSHD – Top units 20
3
AS-interface
5
JSHD – Bottom part
21
Pluto AS-i
5
JSHD – Three position device and button
21
AS-i adaption units for safety inputs
5
Fox23
AS-i integrated safety sensors
5
Accessories for Control Devices
23
Accessories for AS-interface
6
Emergency stops and Pilot devices
25
Safety Controller Vital and Tina Units
7
Inca25
Vital7
Smile25
Tina7
Accessories for Smile and INCA
26
Emergency stop EStrongZ and Grab wire safety switch LineStrong
26
Accessories, connectors and cables
31
Safety relays
8
Safety relay – RT-series
8
Safety relay – JSB-series
8
Safety timers
9
Fencing System Quick-Guard
33
Expansion relays
9
Aluminium profiles 33
Fixing34
Optical Safety Devices
10
Fixing for switches
35
Light curtains Orion 10
Door components
35
Light grids Orion 11
Express sections height 2000 and 2200
37
Spot 11
Express sections height 1400
38
Orion Wet
11
Cover and list
39
Orion Stand
12
Surfaces and fixations
39
Mirrors for Orion
12
Accessories - Fencing system Quick-Guard
40
Lens protection Orion Shield
12
Accessories for Orion
12
Accessories for Focus
13
Accessories for Spot
14
Sensors, switches and locks
15
Eden - Non - contact safety sensor
15
Accessories for Eden - Non - contact safety sensor
15
MKey - Interlock Switch
15
Sense - Magnetic Switch
16
Magne – Magnetic process lock
17
Dalton – Process lock
17
Knox – Safety and process lock
18
Accessories for process lock
19
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  2
Programmable Safety Controller
Pluto
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Pluto A20 v2
2TLA020070R4500
Safety PLC with Pluto safety bus. Totally 20 I/O: 8 failsafe inputs + 8 nonfailsafe outputs/failsafe inputs + 2 individually failsafe relay outputs + 2
individually failsafe transistor outputs. Current monitoring on Q16 + Q17.
Pluto S20 v2
2TLA020070R4700
Safety PLC. Totally 20 I/O: 8 failsafe inputs + 8 non-failsafe outputs/failsafe
inputs + 2 individually failsafe relay outputs + 2 individually failsafe transistor
outputs. (Without Pluto safety bus).
Pluto B20 v2
2TLA020070R4600
Safety PLC with Pluto safety bus. Totally 20 I/O: 8 failsafe inputs + 8 nonfailsafe outputs/failsafe inputs + 2 individually failsafe relay outputs + 2
individually failsafe transistor outputs.
Pluto B22
2TLA020070R4800
Safety PLC with Pluto safety bus. Totally 22 I/O: 14 failsafe inputs + 8 nonfailsafe outputs/failsafe inputs. (Without Pluto safety outputs)
Pluto D20
2TLA020070R6400
Safety PLC with Pluto safety bus and analogue inputs. Totally 20 I/O: 4
combined failsafe analogue and digital inputs + 4 failsafe inputs + 8 nonfailsafe outputs/failsafe inputs + 2 individually failsafe relay outputs + 2
individually failsafe transistor outputs. Analogue input range 0-10V/4-20mA.
Pluto O2
2TLA020070R8500
Safety PLC with Pluto safety bus. Safety output module. Totally 6 I/O: 2
Failsafe inputs for monitoring + 2 non-failsafe outputs/failsafe inputs + 2
individually failsafe relay outputs (with 3 contacts each).
Pluto B46 v2
2TLA020070R1700
Safety PLC with Pluto safety bus. Totally 46 I/O: 24 failsafe inputs + 16
non-failsafe outputs/failsafe inputs + 4 individually failsafe relay outputs + 2
individually failsafe transistor outputs.
Pluto S46 v2
2TLA020070R1800
Safety PLC. Totally 46 I/O: 24 failsafe inputs + 16 non-failsafe outputs/failsafe
inputs + 4 individually failsafe relay outputs + 2 individually failsafe transistor
outputs. (Without Pluto safety bus).
Pluto D45
2TLA020070R6600
Safety PLC with Pluto safety bus and analogue inputs. Totally 45 I/O: 8
combined failsafe analogue and digital inputs + 16 failsafe inputs + 15
non-failsafe outputs/failsafe inputs + 4 individually failsafe relay outputs + 2
individually failsafe transistor outputs. Analogue input range 0-10V/4-20mA.
Accessories for Programmable Safety Controllers
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Gate-P2
Pluto Gateway
PROFIBUS-DP
2TLA020071R8000
Gateway for 2-way communication between the Pluto bus and Profibus.
Gate-C2
Pluto Gateway
CANopen
2TLA020071R8100
Gateway for 2-way communication between the Pluto bus and CANopen.
Gate-D2
Pluto Gateway
DeviceNet
2TLA020071R8200
Gateway for 2-way communication between the Pluto bus and Devicenet.
Gate-EIP
Pluto Gateway EtherNet
2TLA020071R9000
Gateway for 2-way communication between the Pluto bus and Ethernet.
Ethernet protocol EtherNet I/P
Gate-EC
2TLA020071R9100
Pluto Gateway EtherCAT
Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet
protocol EtherCAT
Gate-S3
Pluto Gateway Sercos III
2TLA020071R9200
Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet
protocol SERCOS III
Gate-PN
Pluto Gateway
PROFINET
2TLA020071R9300
Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet
protocol PROFINET
Gate-MT
Pluto Gateway Modbus
TCP
2TLA020071R9400
Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet
protocol Modbus TCP
IDFIX-R
2TLA020070R2000
Identifier, read only. For assigning Pluto an address on the Pluto bus. The
IDFIX number is fixed by delivery.
IDFIX-RW
2TLA020070R2100
Identifier, read/write. For assigning Pluto an address on the Pluto bus. The
IDFIX number is programmable.
IDFIX DATA
2TLA020070R2300
Identifier, read/write and AS-i safety codes. For assigning Pluto an address
on the Pluto bus and storage of AS-i safety codes. The IDFIX number is
programmable. Intended for Pluto AS-i and B42 AS-i but can be used for all
Pluto types.
IDFIX-PROG 2k5
2TLA020070R2400
External program memory, 2.5 kbyte. For projects with only one Pluto the
memory can store the PLC program. Can also be used to give Pluto AS-i a
specific address.
IDFIX-PROG 10k
2TLA020070R2600
External program memory, 10 kbyte. For projects with only one Pluto the
memory can store the PLC program. Can also be used to give Pluto AS-i a
specific address.
R-120
2TLA020070R2200
Terminating resistor for Pluto bus.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  3
Pluto programming
cable
2TLA020070R5600
Cable for connecting PC serial port to Pluto for programming and on-line
monitoring. 9-pole D-sub connector to straight modbus contact.
Pluto communication
cable for HMI
2TLA020070R5700
Cable for connecting HMI-panel to Pluto programming port. Connector at
HMI-side: 15-pole D-sub, Pluto side: 90 degrees angled modbus contact.
Pluto programming
cable USB
2TLA020070R5800
For connecting PC, USB port to Pluto for programming and on-line
monitoring.
CAN-Bus cable
1 x 2 x 0.75 mm2
2TLA020070R6800
CAN-Bus cable, yellow, 1 x 2 x 0.75 mm2. UL & CSA approved.
Absolute encoder RSA
597 w. connector
2TLA020070R3600
Absolute encoder RSA 597, single turn, connector, 10mm shaft.
Absolute encoder RSA
698 multi-turn
2TLA020070R3700
Absolute encoder RSA 698, multi-turn, M12 connector, 10 mm shaft.
Absolute encoder RSA
597 w. 1.5 m cable
2TLA020070R3300
Absolute encoder RSA 597, single turn, 1.5 m cable, 10 mm shaft.
Absolute encoder RHA
597 w. 2 m cable
2TLA020070R3400
Absolute encoder RHA 597, single turn, 2 m cable, hollow shaft, 12 mm hole.
Absolute encoder RHA
597 w. 10 m cable
2TLA020070R5900
Absolute encoder RHA 597, singel turn, 10 m cable, hollow shaft, 12 mm
hole.
Absolute encoder RSA
698 multi-turn 6 mm
shaft
2TLA020071R7800
Absolute encoder RSA 698, multi-turn, M12 connector, 6 mm shaft.
Absolute encoder RHA
698 multi-turn hollow
shaft
2TLA020071R7900
Absolute encoder RHA 698, multi-turn, M12 connector, hollow shaft, 12 mm
hole.
Connector for absolute
encoder
2TLA020070R3900
Connector for absolute encoder RSA 597 with connector.
M12-C01
CAN-Termination
2TLA020061R0300
M12 connector plug with termination resistor for encoders
Pluto
kommunikationskabel
för CP600 HMI
2TLA020070R6900
Cable for connecting HMI-panel ABB CP600 to Pluto programming port.
Connector at HMI-side: 9-pole D-sub
Pluto
kommunikationskabel
för CP400 HMI
2TLA020070R6700
Cable for connecting HMI-panel ABB CP400 to Pluto programming port.
Connector at HMI-side: 9-pole D-sub
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  4
AS-interface
Pluto AS-i
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Pluto AS-i v2
2TLA020070R1100
Safety PLC with AS-i bus and Pluto safety bus. Totally 12 I/O: 4 failsafe inputs
+ 4 non-failsafe outputs/failsafe inputs + 2 individual failsafe relay outputs + 2
individual failsafe transistor outputs.
Pluto B42 AS-i
2TLA020070R1400
Safety PLC with AS-i bus and Pluto safety bus. Totally 42 I/O: 20 failsafe
inputs + 16 non-failsafe outputs/failsafe inputs + 4 individually failsafe relay
outputs + 2 individually failsafe transistor outputs.
AS-i adaption units for safety inputs
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
URAX-A1
2TLA020072R0000
Safe input slave for AS-i bus with 1 safe input for dynamic sensors + 1 nonsafe output.
URAX-A1R
2TLA020072R0100
Safe input slave for AS-i bus with 1 safe input for dynamic sensors + 1 nonsafe output. Input for local reset.
URAX-B1R
2TLA020072R0200
Safe input slave for AS-i bus with 1 safe input for dynamic sensors + 3 nonsafe outputs. Input for local reset.
URAX-C1
2TLA020072R0300
Safe input slave for AS-i bus with 2 safe inputs for devices with dual channel
contacts.
URAX-C1R
2TLA020072R0400
Safe input slave for AS-i bus with 2 safe inputs for devices with dual channel
contacts. Input for local reset.
URAX-D1R
2TLA020072R0500
Safe input slave for AS-i bus with 1 safe dual channel input for safety devices
with transistor outputs (OSSD) + 3 non-safe outputs. Input for local reset.
URAX-E1
2TLA020072R0600
Safe input slave for AS-i bus with safe inputs for two-hand control devices
according to EN 574 type IIIC.
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Smile 11 EA AS-i
2TLA030052R0000
Emergency stop in Smile enclosure, adapted for AS-i system, programable
status LED in button, 1 × M12 5-pin male connector.
Smile 41 WWWWA AS-i
2TLA030056R0000
Push button box according to Smile design with 4 buttons. The box is
adapted for AS-i system. The buttons have programable status LED in
button. Connection via a M12 5-pin male connector.
Smile 41 EWWWA AS-i
2TLA030056R0100
Push button box according to Smile design with 4 buttons, one of which
is an emergency stop. The box is adapted for AS-i system. The buttons
have programable status LED in button. Connection via a M12 5-pin male
connector.
Smile 41 EKWWA AS-i
2TLA030056R0200
Push button box according to Smile design with 4 buttons, one of which
is an emergency stop and another a safe key switch. The box is adapted
for AS-i system. The buttons have programable status LED in button.
Connection via a M12 5-pin male connector.
JSHD4-2-AF-A
2TLA019995R0700
Three-position device incl. LEDs, front button and top button with M12
connection (4 poles) and 2 AS-i nodes (for front and top button) and Antitamper PCB.
Eva AS-i
2TLA020051R8000
Eva actuator for use with Adam AS‑i sensors in the Eden sensor system,
IP69K, yellow, 4 pcs of DA2 spacer rings are included.
1
-A1
AX
UR
1
R
-A1
AX
UR
1
3
R
-B1
AX
UR
1
3
-C1
AX
UR
1
3
R
-C1
AX
UR
1
3
R
-D1
AX
UR
1
3
-E1
AX
UR
AS-i integrated safety sensors
IMAGES
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  5
Adam AS-i M12
2TLA020051R6000
Adam safety sensor unit with a fixed M12 male connector, AS‑i node, IP69K,
yellow, 4 pcs of DA1 protection plate and 4 pcs of DA2 spacer rings are
included.
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
AS-i T-connector
with M12
2TLA020073R0000
Flat cable connector to M12 5-pole.
AS-i Splitter box
2TLA020073R0300
Flat cable splitter. Makes it possible to make T-connections and also possible
to extend cables.
JSM D25 Bracket
for URAX/FLEX
2TLA020072R9800
Bracket including fasteners for URAX mounting on ABB Jokab Safety fence
system.
URAX/FLEX
Bottom Plate
2TLA020072R9900
URAX Bottom Plate.
JSAUR1 M12 plug
2TLA020073R0100
Auto reset plug for URAX-R.
M12-CT0214
Transfer cable 8->5 pol.
Tina 4/8 and Urax
2TLA020060R0100
Transfer cable, 20 cm 5/8 × 0.34 mm2 + screen with straight M12 8-pole
female + 5-pole male connectors. Screen connected to pin7 (0VDC) on male
connector. Can be used for connection of Dalton to URAX or Tina4/8.
Accessories for AS-interface
IMAGES
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  6
Safety Controller Vital and Tina Units
Vital
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Vital 1
2TLA020052R1000
Safety module with one single channel input for dynamic sensors. Relay
outputs 2NO.
Vital 2
2TLA020070R4300
Safety module with two single channel inputs for dynamic sensors.
Vital 3
2TLA020070R4400
Safety module with one single channel input for dynamic sensors, and one
dual channel input for closing switches.
Tina
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Tina 1A
2TLA020054R0000
Tina 1A is a device that is designed for use with the connection block
Tina 4A or 8A, where it is used as a blind plug in unused M12 connection.
Tina 2A
2TLA020054R0100
Adaption unit for dynamic circuits. Tina 2A is with M20 fitting for connection
of emergency stops and other safety devices having a suitable combination
of potential free contacts.
Tina 2B
2TLA020054R1100
Adaption unit for dynamic circuits. Tina 2B with cable for internal assembly in
emergency stops and other safety sensors with potential free contacts.
Tina 3A
2TLA020054R0200
Adaption unit for dynamic circuits. Tina 3A with M12 connection and M20
fitting for use with emergency stop and other safety sensors with potential
free contacts.
Tina 3Aps
2TLA020054R1400
Adaption unit for dynamic circuits. Tina 3A with M12 connection and M20
fitting for use with emergency stop and other safety sensors with potential
free contacts. Ps-version is with connection for 24VDC and 0VDC.
Tina 4A
2TLA020054R0300
Connection block with adaption unit for dynamic circuits. Four M12 5-pole
connectors for sensor input. Each sensors information status can be wired
separatly. Cable connection diameter range: 7–12 mm.
Tina 5A ver G
2TLA020054R1900
Bypass unit for dynamic units with supervision of the bypass lamp.
Tina 7A
2TLA020054R0700
Adaption unit for dynamic circuits. Tina 7A for installation on DIN rails in
Electrical cabinets. Electrical connection via detachable terminal blocks. Tina
7A is used for emergency stops in the same Electrical cabinet.
Tina 8A
2TLA020054R0500
Connection block with adaption unit for dynamic circuits. Eight M12 5-pole
connectors for sensor input. Each sensors information status can be wired
separatly. Cable connection diameter range: 7–12 mm.
Tina 10A
2TLA020054R1200
Adaption unit were OSSD outputs (PNP) from Focus II can be transformed
for dynamic circuits.
Tina 10B
2TLA020054R1300
Adaption unit were OSSD outputs (PNP) from Focus II can be transformed
for dynamic circuits. Tina 10B has an extra M12 connector were a reset unit
like FMI-1B can be connected (reset, a reset lamp and power off).
Tina 10C
2TLA020054R1600
Adaption unit were OSSD outputs (PNP) from Focus II can be transformed
for dynamic circuits. Tina 10C has an extra M12 connector were a the light
protections transmitter can be connected (For power).
Tina 11A
2TLA020054R1700
Connection block with adaption unit for dynamic circuits. Two M12 5-pole
connectors for sensor input.
Tina 12A
2TLA020054R1800
Connection block with adaption unit for dynamic circuits. Two M12 8-pole
connectors for sensor input. For example Dalton and Magne locks.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  7
Safety relays
Safety relay - RT-series
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
RT6 24 VDC
Safety relay
2TLA010026R0000
A universal safety relay for several safety applications. Relay outputs 3NO / 1NC.
RT6 24 VAC
Safety relay
2TLA010026R0200
A universal safety relay for several safety applications. Relay outputs 3NO / 1NC.
RT6 115 VAC
Safety relay
2TLA010026R0400
A universal safety relay for several safety applications. Relay outputs 3NO / 1NC.
RT6 230 VAC
Safety relay
2TLA010026R0500
A universal safety relay for several safety applications. Relay outputs 3NO / 1NC.
RT7A 1.5s 24 VDC
Safety relay
2TLA010028R2000
A universal safety relay for several safety applications. 2 delayed outputs of
1.5 sec. Relay outputs 2NO / 2NO / 1NC.
RT7A 1.5s 24 VAC
Safety relay
2TLA010028R2200
A universal safety relay for several safety applications. 2 delayed outputs of
1.5 sec. Relay outputs 2NO / 2NO / 1NC.
RT7A 1.5s 115 VAC
Safety relay
2TLA010028R2400
A universal safety relay for several safety applications. 2 delayed outputs of
1.5 sec. Relay outputs 2NO / 2NO / 1NC.
RT7A 1.5s 230 VAC
Safety relay
2TLA010028R2500
A universal safety relay for several safety applications. 2 delayed outputs of
1.5 sec. Relay outputs 2NO / 2NO / 1NC.
RT7B 3s 24 VDC
Safety relay
2TLA010028R1000
A universal safety relay for several safety applications. 2 delayed outputs of
3 sec. Relay outputs 2NO / 2NO / 1NC.
RT7B 3s 115 VAC
Safety relay
2TLA010028R1400
A universal safety relay for several safety applications. 2 delayed outputs of
3 sec. Relay outputs 2NO / 2NO / 1NC.
RT7B 3s 230 VAC
Safety relay
2TLA010028R1500
A universal safety relay for several safety applications. 2 delayed outputs of
3 sec. Relay outputs 2NO / 2NO / 1NC.
RT9 24 VDC
Safety relay
2TLA010029R0000
A universal safety relay for several safety applications. Relay outputs 2NO.
JSBRT11 24 VDC
Safety relay
2TLA010025R0000
A flexible safety relay with many outputs. Relay outputs 7NO / 2NC.
JSBRT11 115 VAC
Safety relay
2TLA010025R0400
A flexible safety relay with many outputs. Relay outputs 7NO / 2NC.
JSBRT11 230 VAC
Safety relay
2TLA010025R0500
A flexible safety relay with many outputs. Relay outputs 7NO / 2NC.
Safety relay – JSB-series
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSBR4 24 VDC
Safety relay
2TLA010002R0000
Safety relay for two hand device and many other safety products. Power
supply 24 VDC. Relay outputs 3NO / 1NC.
JSBR4 24 VAC
Safety relay
2TLA010002R0200
Safety relay for two hand device and many other safety products. Power
supply 24 VAC. Relay outputs 3NO / 1NC.
JSBR4 115 VAC
Safety relay
2TLA010002R0400
Safety relay for two hand device and many other safety products. Relay
outputs 3NO / 1NC.
JSBR4 230 VAC
Safety relay
2TLA010002R0500
Safety relay for two hand device and many other safety products. Relay
outputs 3NO / 1NC.
JSBT4 24 VDC
Safety relay
2TLA010004R0000
Safety relay with synchronised dual input channels Relay outputs 3NO / 1NC.
BT50 24 VDC
Safety relay
2TLA010033R0000
Safety relay/expansion relay. Relay outputs 3NO / 1NC.
BT50T 24 VDC
Safety relay
2TLA010033R1000
Safety relay/expansion relay. Time delay 0-1.5 sec. Relay outputs: 4NO.
BT51 24 VDC
Safety relay
2TLA010033R2000
Safety relay/expansion relay. Relay outputs 4NO.
BT51T 24 VDC
Safety relay
2TLA010033R3000
Safety relay/expansion relay. Time delay 0-1.5 sec. Relay outputs: 3NO / 1NC.
JSBT5 24 VAC/VDC
Safety relay
2TLA010005R0100
Single channel and ”dual” channel safety relay. Relay outputs 3NO / 1NC.
JSBT5 12 VDC
Safety relay
2TLA010005R0700
Single channel and ”dual” channel safety relay. Relay outputs 3NO / 1NC.
JSBT5T 24 VAC/VDC
Safety relay
2TLA010005R1100
Single channel and ”dual” channel safety relay. Relay outputs 3NO / 1NC.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  8
Safety timers
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSHT1A 24 VDC
Time module
2TLA010011R0000
Safety timer for time reset and time bypassing. Hardwired time selection
5-20 sec. Relay outputs 1NO + 1NO.
JSHT1B 24 VDC
Time module
2TLA010011R1000
Safety timer for time reset and time bypassing. Hardwired time selection
5-40 sec. Relay Outputs 1NO + 1NO.
JSHT2A 24 VDC
Time module
2TLA010012R0000
Safety timer for time bypassing and inching. Hardwired time selection
0.2‑1 sec. Relay Outputs 1NO + 1NO.
JSHT2B 24 VDC
Time module
2TLA010012R1000
Safety timer for time bypassing and inching. Hardwired time selection
5-20 sec. Relay Outputs 1NO + 1NO.
JSHT2C 24 VDC
Time module
2TLA010012R2000
Safety timer for time bypassing and inching. Hardwired time selection
05‑40 sec. Relay Outputs 1NO + 1NO.
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
E1T 0s 24 VDC
Expansion relay
2TLA010030R0000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 0 sec. Relay outputs 4NO.
E1T 0.5s 24 VDC
Expansion relay
2TLA010030R1000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 0.5 sec. Relay outputs 4NO.
E1T 1s 24 VDC
Expansion relay
2TLA010030R2000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 1 sec. Relay outputs 4NO.
E1T 1.5s 24 VDC
Expansion relay
2TLA010030R3000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 1.5 sec. Relay outputs 4NO.
E1T 2s 24 VDC
Expansion relay
2TLA010030R4000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 2 sec. Relay outputs 4NO.
E1T 3s 24 VDC
Expansion relay
2TLA010030R5000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 3 sec. Relay outputs 4NO.
JSR1T 0s 24 VDC
Expansion relay
2TLA010015R0000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 0 sec. Relay outputs 4NO / 1NC.
JSR1T 1.5s 24 VDC
Expansion relay
2TLA010015R0500
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 1.5 sec. Relay outputs 4NO / 1NC.
JSR1T 8s 24 VDC
Expansion relay
2TLA010015R0600
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 8 sec. Relay outputs 4NO / 1NC.
JSR1T 0.5s 24 VDC
Expansion relay
2TLA010015R1000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 0.5 sec. Relay outputs 4NO / 1NC.
JSR1T 10s 24 VDC
Expansion relay
2TLA010015R2000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 10 sec. Relay outputs 4NO / 1NC.
JSR1T 1s 24 VDC
Expansion relay
2TLA010015R3000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 1 sec. Relay outputs 4NO / 1NC.
JSR1T 2s 24 VDC
Expansion relay
2TLA010015R4000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 2 sec. Relay outputs 4NO / 1NC.
JSR1T 3s 24 VDC
Expansion relay
2TLA010015R5000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 3 sec. Relay outputs 4NO / 1NC.
JSR1T 5s 24 VDC
Expansion relay
2TLA010015R6000
Safety expansion relay - for expanding the outputs of safety relays. Time
delay 5 sec. Relay outputs 4NO / 1NC.
JSR2A 24 VAC/VDC
Expansion relay
2TLA010027R0100
Expansions relay for more outputs. Higher switching capacity. Up to 10 amps
per output. Relay outputs 3NO / 1NC.
JSR2A 115 VAC
Expansion relay
2TLA010027R0400
Expansions relay for more outputs. Higher switching capacity. Up to 10 amps
per output. Relay outputs 3NO / 1NC.
JSR2A 230 VAC
Expansion relay
2TLA010027R0500
Expansions relay for more outputs. Higher switching capacity. Up to 10 amps
per output. Relay outputs 3NO / 1NC.
JSR3T 24 VAC/VDC
Expansion relay
2TLA010017R0100
Safety expansion relay for safe delayed outputs. Hardwire Selectable Delay
0.5 - 10.0 sec. Relay Outputs 1NO + 1NO.
Expansion relays
IMAGES
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  9
Optical Safety Devices
Light curtains Orion
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Orion1-4-14-015-B
2TLA022300R0000
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 150 mm
Orion1-4-14-030-B
2TLA022300R0100
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 300 mm
Orion1-4-14-045-B
2TLA022300R0200
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 450 mm
Orion1-4-14-060-B
2TLA022300R0300
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 600 mm
Orion1-4-14-075-B
2TLA022300R0400
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 750 mm
Orion1-4-14-090-B
2TLA022300R0500
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 900 mm
Orion1-4-14-105-B
2TLA022300R0600
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 1050 mm
Orion1-4-14-120-B
2TLA022300R0700
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 1200 mm
Orion1-4-14-135-B
2TLA022300R0800
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 1350 mm
Orion1-4-14-150-B
2TLA022300R0900
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 1500 mm
Orion1-4-14-165-B
2TLA022300R1000
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 1650 mm
Orion1-4-14-180-B
2TLA022300R1100
Orion1 Base Transmitter + Receiver - R = 14 mm - H = 1800 mm
Orion1-4-30-015-B
2TLA022302R0000
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 150 mm
Orion1-4-30-030-B
2TLA022302R0100
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 300 mm
Orion1-4-30-045-B
2TLA022302R0200
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 450 mm
Orion1-4-30-060-B
2TLA022302R0300
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 600 mm
Orion1-4-30-075-B
2TLA022302R0400
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 750 mm
Orion1-4-30-090-B
2TLA022302R0500
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 900 mm
Orion1-4-30-105-B
2TLA022302R0600
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 1050 mm
Orion1-4-30-120-B
2TLA022302R0700
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 1200 mm
Orion1-4-30-135-B
2TLA022302R0800
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 1350 mm
Orion1-4-30-150-B
2TLA022302R0900
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 1500 mm
Orion1-4-30-165-B
2TLA022302R1000
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 1650 mm
Orion1-4-30-180-B
2TLA022302R1100
Orion1 Base Transmitter + Receiver - R = 30 mm - H = 1800 mm
Orion1-4-14-030-E
2TLA022301R0100
Orion1 Extended Transmitter + Receiver - R = 14 mm - H = 300 mm
Orion1-4-14-045-E
2TLA022301R0200
Orion1 Extended Transmitter + Receiver - R = 14 mm - H = 450 mm
Orion1-4-14-060-E
2TLA022301R0300
Orion1 Extended Transmitter + Receiver - R = 14 mm - H = 600 mm
Orion1-4-14-075-E
2TLA022301R0400
Orion1 Extended Transmitter + Receiver - R = 14 mm - H = 750 mm
Orion1-4-14-090-E
2TLA022301R0500
Orion1 Extended Transmitter + Receiver - R = 14 mm - H = 900 mm
Orion1-4-14-105-E
2TLA022301R0600
Orion1 Extended Transmitter + Receiver - R = 14 mm - H = 1050 mm
Orion1-4-14-120-E
2TLA022301R0700
Orion1 Extended Transmitter + Receiver - R = 14 mm - H = 1200 mm
Orion1-4-14-135-E
2TLA022301R0800
Orion1 Extended Transmitter + Receiver - R = 14 mm - H = 1350 mm
Orion1-4-14-150-E
2TLA022301R0900
Orion1 Extended Transmitter + Receiver - R = 14 mm - H = 1500 mm
Orion1-4-14-165-E
2TLA022301R1000
Orion1 Extended Transmitter + Receiver - R = 14 mm - H = 1650 mm
Orion1-4-14-180-E
2TLA022301R1100
Orion1 Extended Transmitter + Receiver - R = 14 mm - H = 1800 mm
Orion1-4-30-030-E
2TLA022303R0100
Orion1 Extended Transmitter + Receiver - R = 30 mm - H = 300 mm
Orion1-4-30-045-E
2TLA022303R0200
Orion1 Extended Transmitter + Receiver - R = 30 mm - H = 450 mm
Orion1-4-30-060-E
2TLA022303R0300
Orion1 Extended Transmitter + Receiver - R = 30 mm - H = 600 mm
Orion1-4-30-075-E
2TLA022303R0400
Orion1 Extended Transmitter + Receiver - R = 30 mm - H = 750 mm
Orion1-4-30-090-E
2TLA022303R0500
Orion1 Extended Transmitter + Receiver - R = 30 mm - H = 900 mm
Orion1-4-30-105-E
2TLA022303R0600
Orion1 Extended Transmitter + Receiver - R = 30 mm - H = 1050 mm
Orion1-4-30-120-E
2TLA022303R0700
Orion1 Extended Transmitter + Receiver - R = 30 mm - H = 1200 mm
Orion1-4-30-135-E
2TLA022303R0800
Orion1 Extended Transmitter + Receiver - R = 30 mm - H = 1350 mm
Orion1-4-30-150-E
2TLA022303R0900
Orion1 Extended Transmitter + Receiver - R = 30 mm - H = 1500 mm
Orion1-4-30-165-E
2TLA022303R1000
Orion1 Extended Transmitter + Receiver - R = 30 mm - H = 1650 mm
Orion1-4-30-180-E
2TLA022303R1100
Orion1 Extended Transmitter + Receiver - R = 30 mm - H = 1800 mm
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  10
Light grids Orion
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Orion2-4-K2-050-B
2TLA022304R0000
Orion2 Base Transmitter + Receiver - 2 beams - H = 500 mm
Orion2-4-K3-080-B
2TLA022304R0100
Orion2 Base Transmitter + Receiver - 3 beams - H = 800 mm
Orion2-4-K4-090-B
2TLA022304R0200
Orion2 Base Transmitter + Receiver - 4 beams - H = 900 mm
Orion2-4-K4-120-B
2TLA022304R0300
Orion2 Base Transmitter + Receiver - 4 beams - H = 1200 mm
Orion2-4-K2-050-E
2TLA022305R0000
Orion2 Extended Transmitter + Receiver - 2 beams - H = 500 mm
Orion2-4-K3-080-E
2TLA022305R0100
Orion2 Extended Transmitter + Receiver - 3 beams - H = 800 mm
Orion2-4-K4-090-E
2TLA022305R0200
Orion2 Extended Transmitter + Receiver - 4 beams - H = 900 mm
Orion2-4-K4-120-E
2TLA022305R0300
Orion2 Extended Transmitter + Receiver - 4 beams - H = 1200 mm
Orion3-4-K1C-050-B
2TLA022306R0000
Orion3 Base - Active unit - 2 beams - H = 500 mm
Orion3-4-K2C-080-B
2TLA022306R0100
Orion3 Base - Active unit - 3 beams - H = 800 mm
Orion3-4-K2C-090-B
2TLA022306R0200
Orion3 Base - Active unit - 4 beams - H = 900 mm
Orion3-4-K2C-120-B
2TLA022306R0300
Orion3 Base - Active unit - 4 beams - H = 1200 mm
Orion3-4-M1C-050
2TLA022306R1000
Orion3 Base - Passive unit (mirror) - H = 500 mm
Orion3-4-M2C-080
2TLA022306R1100
Orion3 Base - Passive unit (mirror) - H = 800 mm
Orion3-4-M2C-090
2TLA022306R1300
Orion3 Base - Passive unit (mirror) - H = 900 mm
Orion3-4-M2C-120
2TLA022306R1400
Orion3 Base - Passive unit (mirror) - H = 1200 mm
Orion3-4-K1C-050-E
2TLA022307R0000
Orion3 Extended - Active unit - 2 beams - H = 500 mm
Orion3-4-K2C-080-E
2TLA022307R0100
Orion3 Extended - Active unit - 3 beams - H = 800 mm
Orion3-4-K2C-090-E
2TLA022307R0200
Orion3 Extended - Active unit - 4 beams - H = 900 mm
Orion3-4-K2C-120-E
2TLA022307R0300
Orion3 Extended - Active unit - 4 beams - H = 1200 mm
Orion3-4-M1C-050
2TLA022306R1000
Orion3 Extended - Passive unit (mirror) - H = 500 mm
Orion3-4-M2C-080
2TLA022306R1100
Orion3 Extended - Passive unit (mirror) - H = 800 mm
Orion3-4-M2C-090
2TLA022306R1300
Orion3 Extended - Passive unit (mirror) - H = 900 mm
Orion3-4-M2C-120
2TLA022306R1400
Orion3 Extended - Passive unit (mirror) - H = 1200 mm
Spot
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Spot 10 T/R
2TLA020009R0600
Safety light beam for up to 10 m distance. M18 steel casing with M12
connector.
Orion Wet
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Orion WET-015
Orion WET-030
Orion WET-045
Orion WET-060
Orion WET-075
Orion WET-090
Orion WET-105
Orion WET-120
Orion WET-135
Orion WET-150
Orion WET-165
Orion WET-180
Orion WET-K050
Orion WET-K080
Orion WET-K090
Orion WET-K120
2TLA022313R0000
2TLA022313R0100
2TLA022313R0200
2TLA022313R0300
2TLA022313R0400
2TLA022313R0500
2TLA022313R0600
2TLA022313R0700
2TLA022313R0800
2TLA022313R0900
2TLA022313R1000
2TLA022313R1100
2TLA022313R3000
2TLA022313R3100
2TLA022313R3200
2TLA022313R3300
Protective tube for corresponding Orion1 Base. H = 150 mm
Protective tube for corresponding Orion1 Base. H = 300 mm
Protective tube for corresponding Orion1 Base. H = 450 mm
Protective tube for corresponding Orion1 Base. H = 600 mm
Protective tube for corresponding Orion1 Base. H = 750 mm
Protective tube for corresponding Orion1 Base. H = 900 mm
Protective tube for corresponding Orion1 Base. H = 1050 mm
Protective tube for corresponding Orion1 Base. H = 1200 mm
Protective tube for corresponding Orion1 Base. H = 1350 mm
Protective tube for corresponding Orion1 Base. H = 1500 mm
Protective tube for corresponding Orion1 Base. H = 1650 mm
Protective tube for corresponding Orion1 Base. H = 1800 mm
Protective tube for corresponding Orion2. H = 500 mm
Protective tube for corresponding Orion2. H = 800 mm
Protective tube for corresponding Orion2. H = 900 mm
Protective tube for corresponding Orion2. H = 1200 mm
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  11
Orion Stand
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Orion Stand 060
2TLA022312R0000
Height 600 mm. Fits Orion1 Mirror 060 and shorter.
Orion Stand 100
2TLA022312R0100
Height 1000 mm. Fits Orion1 Mirror 090 and shorter
Orion Stand 120
2TLA022312R0200
Height 1200 mm. Fits Orion1 Mirror 120 and shorter.
Orion Stand 165
2TLA022312R0300
Height 1650 mm. Fits Orion1 Mirror 165 and shorter.
Orion Stand 190
2TLA022312R0400
Height 1900 mm. Fits Orion1 Mirror 190 and shorter.
JSM Orion06
2TLA022310R0400
Kit for mounting of Orion1 & Orion2 in Stand (4 pieces)
JSM Orion07
2TLA022310R0500
Kit for mounting of Orion1 & Orion2 in Stand (6 pieces)
JSM Orion08
2TLA022310R0600
Kit for mounting of Orion3 in Stand (4 pieces)
JSM Orion09
2TLA022310R0700
Kit for mounting of Orion3 in Stand (6 pieces)
JSM Orion11
2TLA022310R0900
Kit for mounting of Orion1 Mirror in Stand
Orion Stand Plate
2TLA022312R5000
Orion Plate kit for adjustment of protective stand
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Orion1 Mirror 060
2TLA022311R0100
Can be used up to Orion1-4-xx-045-x
Orion1 Mirror 090
2TLA022311R0200
Can be used up to Orion1-4-xx-075-x
Orion1 Mirror 120
2TLA022311R0300
Can be used up to Orion1-4-xx-105-x
Orion1 Mirror 165
2TLA022311R0400
Can be used up to Orion1-4-xx-150-x
Orion1 Mirror 190
2TLA022311R0500
Can be used up to Orion1-4-xx-180-x
Orion Mirror K050
2TLA022312R1000
Used with Orion2-4-K2-050-B/E and Orion3-4-K1C-050-B/E. Height 1000 mm.
Orion Mirror K080
2TLA022312R1100
Used with Orion2-4-K3-080-B/E and Orion3-4-K2C-080-B/E. Height 1200 mm.
Orion Mirror K090
2TLA022312R1200
Used with Orion2-4-K4-090-B/E and Orion3-4-K2C-090-B/E. Height 1650 mm.
Orion Mirror K120
2TLA022312R1300
Used with Orion2-4-K4-120-B/E and Orion3-4-K2C-120-B/E. Height 1650 mm.
Mirrors for Orion
IMAGES
Lens protection Orion Shield
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Orion Shield-015
2TLA022313R5000
Lens shield for Orion1-4-xx-015-B
Orion Shield-030
2TLA022313R5100
Lens shield for Orion1-4-xx-030-B
Orion Shield-045
2TLA022313R5200
Lens shield for Orion1-4-xx-045-B
Orion Shield-060
2TLA022313R5300
Lens shield for Orion1-4-xx-060-B
Orion Shield-075
2TLA022313R5400
Lens shield for Orion1-4-xx-075-B
Orion Shield-090
2TLA022313R5500
Lens shield for Orion1-4-xx-090-B
Orion Shield-105
2TLA022313R5600
Lens shield for Orion1-4-xx-105-B
Orion Shield-120
2TLA022313R5700
Lens shield for Orion1-4-xx-120-B
Orion Shield-135
2TLA022313R5800
Lens shield for Orion1-4-xx-135-B
Orion Shield-150
2TLA022313R5900
Lens shield for Orion1-4-xx-150-B
Orion Shield-165
2TLA022313R6000
Lens shield for Orion1-4-xx-165-B
Orion Shield-180
2TLA022313R6100
Lens shield for Orion1-4-xx-180-B
Orion Shield-K050
2TLA022313R8000
Lens shield for Orion2-4-K2-050-B
Orion Shield-K080
2TLA022313R8100
Lens shield for Orion2-4-K3-080-B
Orion Shield-K090
2TLA022313R8200
Lens shield for Orion2-4-K4-090-B
Orion Shield-K120
2TLA022313R8300
Lens shield for Orion2-4-K4-120-B
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Orion TP-14
2TLA022310R5200
Orion Test Piece 14 mm
Orion TP-30
2TLA022310R5300
Orion Test Piece 30 mm
Orion Laser
2TLA022310R5000
Orion Laser pointer
JSM Orion01
2TLA022310R0000
4 standard brackets for Orion1 & Orion2
JSM Orion02
2TLA022310R1000
4 standard brackets for Orion3
Accessories for Orion
IMAGES
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  12
JSM Orion03
2TLA022310R0100
4 rotation brackets for Orion1 Base
JSM Orion04
2TLA022310R0200
4 rotation brackets for Orion2
JSM Orion05
2TLA022310R0300
4 rotation brackets for Orion3
JSM Orion06
2TLA022310R0400
Kit for mounting of Orion1 & Orion2 in Stand (4 pieces)
JSM Orion07
2TLA022310R0500
Kit for mounting of Orion1 & Orion2 in Stand (6 pieces)
JSM Orion08
2TLA022310R0600
Kit for mounting of Orion3 in Stand (4 pieces)
JSM Orion09
2TLA022310R0700
Kit for mounting of Orion3 in Stand (6 pieces)
JSM Orion10
2TLA022310R0800
Kit for mounting Orion1 Mirror on a wall
JSM Orion11
2TLA022310R0900
Kit for mounting of Orion1 Mirror in Stand
Orion Stand Plate
2TLA022312R5000
Orion Plate kit for adjustment of protective stand
M12-C02PT2T
2TLA022315R0100
Transmitter cable for Orion1 Extended
M12-C02PT6RB
2TLA022315R0200
Receiver cable for Orion1 Extended when no muting
M12-C02PT62RM
2TLA022315R0300
Receiver cable for Orion1 Extended when muting
PT-C1PT
2TLA022315R1000
Cascade cable for Orion1 Extended, 1 m
PT-C05PT
2TLA022315R1100
Cascade cable for Orion1 Extended, 0.5 m
PT-C005PT
2TLA022315R1200
Cascade cable for Orion1 Extended, 0.05 m
M12-C65
2TLA020056R7200
Straight M12-12 female connector with 6 m shielded cable
M12-C105
2TLA020056R7300
Straight M12-12 female connector with 10 m shielded cable
M12-C205
2TLA020056R7500
Straight M12-12 female connector with 20 m shielded cable
JSMA44-L
Post 1000 mm
2TLA040001R0000
Aluminum post 44 × 44, 1000 mm with end cap.
JSMA44-L
Post 1300 mm with feet
brackets
2TLA040001R1000
Aluminum post 44 × 44, 1300 mm with 3 pcs feet brackets and end cap.
JSMA44A-L
Post 1100 mm with feet
brackets
2TLA040001R1100
Aluminum post 44 × 44, 1100 mm with 3 pcs feet brackets and end cap.
JSMA44A-LM
Post 1100 mm for
muting
2TLA040001R1300
Aluminum post 44 x 44, 1100 mm, 2 pcs 500 mm with 3 pcs feet brackets,
2 pcs T-brackets and end cap.
JSMA44A-LM
Post 1300 mm for
muting
2TLA040001R1400
Aluminum post 44 x 44, 1300 mm, 2 pcs 500 mm with 3 pcs feet brackets,
2 pcs T-brackets and end cap.
Accessories for Focus
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
FMC-1
2TLA022042R0000
FMC-1 Focus muting connection unit with 4 connectors. With connectors
for muting sensors (A+B), reset, power off and muting lamp (R) and muting
lamp (M).
FMC-2
2TLA022042R1000
FMC-2 Focus muting connection unit with 6 connectors. With connectors
for muting sensors (A1, A2+B1, B2), reset, power off and muting lamp (R) and
muting lamp (M).
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  13
FMI-1A
2TLA022043R0000
FMI-1A muting lamp unit with M12 connector.
FMI-1B
2TLA022043R0100
FMI-1B muting lamp unit with reset+lamp, power off button and with M12
connector.
FMI-1C
2TLA022043R0200
FMI-1C unit with reset+lamp, power off button and M12 connector.
FMI-1D
2TLA022043R0300
FMI-1D unit with reset+lamp, power off button, muting resistor and
M12‑connector.
FMI-1E
2TLA022043R0400
FMI-1E (pre) reset button blue. FMI-1E unit with reset+lamp and
M12‑connector.
FMI-1G
2TLA022043R0500
FMI-1G reset+lamp and muting resistor with M12 connector.
FMC-1 Tina
2TLA022045R0000
FMC-1 Tina Focus connection to Vital or Pluto. 4 connectors for muting.
With connectors for muting sensors (A+B), reset, power off and muting lamp
(R) and muting lamp (M). Tina unit is for adaption to Vital or Pluto dynamic
circuit.
FMC-2 Tina
2TLA022046R0000
FMC-2 Tina Focus connection to Vital or Pluto. 6 connectors for muting. With
connectors for muting sensors (A1, A2+B1, B2), reset, power off and muting
lamp (R) and muting lamp (M). Tina unit is for adaption to Vital or Pluto
dynamic circuit.
FRM-1A
2TLA022048R0000
FRM-1A relay unit for Focus II with 8-pin M12‑connectors.
BP-1
2TLA022090R2300
Blanking programming unit for Focus II light curtains.
JSAP-1
2TLA022070R1000
JSAP-1 Adapter plug including resistor and 2 jumpers.
Bolt set to Focus II
2TLA022090R0000
Bolt set Focus II. 2 × M6 × 14 stainless steel bolts with washers, plastic
washers and lock nuts.
Accessories for Spot
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSM60-L
2TLA040003R0000
JSM60-L Bracket for JSM9 or JSM63. Includes screws for profile.
JSM62-L
2TLA040004R0000
JSM62-L Bracket for JSM9 for horizontal angling around a machine. Includes
screws for profile.
JSM7A
Mirror medium
2TLA040006R0500
Mirror for 0-20 m, adjustable mirror plate. Dimensions: 115 × 80 × 30 mm.
Screws for bracket included.
JSM9
Bracket for mirror
2TLA040007R0000
JSM9 Bracket for mirror.
JSM64
Bracket with angle
possibility for M18
2TLA040007R0200
Adjustable mounting bracket with rotational knuckle for 18 mm barrel style
sensors. Example, Spot 10T/R or MUTE R (FSTR1).
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  14
Sensors, switches and locks
Eden - Non - contact safety sensor
IMAGES
Eden AS-i
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Adam AS-i M12
2TLA020051R6000
Adam safety sensor unit with a fixed M12 male connector, AS-i node, IP69K,
yellow, 4pcs of DA 1 protection plate and 4pcs of DA 2B spacer rings are included.
Eva AS-i
2TLA020051R8000
Eva actuator for use with Adam AS-i sensors in the Eden sensor system, IP69K,
yellow, 4pcs of DA2 spacer rings are included.
Adam DYN-Info 5
M12-5 contact
2TLA020051R5100
Adam safety sensor unit with dynamic signal, information output, fixed 5-pole
M12 male connector, IP69K, yellow, 4pcs of DA 1B protection plate and 4pcs
of DA 2B spacer rings are included.
Adam DYN-Reset 5
M12-8 contact
2TLA020051R5300
Adam safety sensor unit with dynamic signal, reset with indication, fixed 5-pole
M12 male connector, IP69K, yellow, 4pcs of DA 1B protection plate and 4pcs
of DA 2B spacer rings are included.
Eva General code
2TLA020046R0800
Eva actuator with general code for use with Adam DYN/OSSD sensors in the
Eden sensor system, IP69K, yellow, 4pcs of DA 2B spacer rings are included.
Eva Unique code
2TLA020046R0900
Eva actuator with unique code for use with Adam DYN/OSSD sensors in the
Eden sensor system, IP69K, yellow, 4pcs of DA 2B spacer rings are included.
Adam OSSD-Info
M12-5 contact
2TLA020051R5400
Adam safety sensor unit with OSSD signals, information output, fixed 5-pole
M12 male connector, IP69K, yellow, 4pcs of DA 1B protection plate and 4pcs
of DA 2B spacer rings are included.
Adam OSSD-Info
M12-8 contact
2TLA020051R5700
Adam safety sensor unit with OSSD signals, information output, fixed 8-pole
M12 male connector, IP69K, yellow, 4pcs of DA 1B protection plate and 4pcs
of DA 2B spacer rings are included.
Adam OSSD-Reset
M12-5 contact
2TLA020051R5600
Adam safety sensor unit with OSSD signals, reset with indication, fixed 5-pole
M12 male connector, IP69K, yellow, 4pcs of DA 1B protection plate and 4pcs
of DA 2B spacer rings are included.
Adam OSSD-Reset
M12-8 contact
2TLA020051R5900
Adam safety sensor unit with OSSD signals, reset with indication, fixed 8-pole
M12 male connector, IP69K, yellow, 4pcs of DA 1B protection plate and 4pcs
of DA 2B spacer rings are included.
Eva General code
2TLA020046R0800
Eva actuator with general code for use with Adam DYN/OSSD sensors in the
Eden sensor system, IP69K, yellow, 4pcs of DA 2B spacer rings are included.
Eva Unique code
2TLA020046R0900
Eva actuator with unique code for use with Adam DYN/OSSD sensors in the
Eden sensor system, IP69K, yellow, 4pcs of DA 2B spacer rings are included.
Eden Dynamic
Eden OSSD
Accessories for Eden - Non - contact safety sensor
DA 1B Distance plate
2TLA020053R0700
Protection plate, thickness 2.5 mm, yellow PCB. For Adam M12 and associated
Eva. Not suitable for Adam E and Eva E.
DA 2B Distance ring
2TLA020053R0300
Mounting spacer 4.5 x 8 x 4 mm, in black polyamide, for use with Adam and
Eva units (Eden AS-i/Dynamic and OSSD).
DA 3A Mounting
converting plate for
Eden E
2TLA020053R0600
Mounting converting plate for Eden E, for use with Adam and Eva units.
M12
M12 Torque wrench
2TLA020053R0900
Controlled fastening of circular plug connectors with hexagonal head according
to specified torque 0,6 Nm. Robust, glass-fibre reinforced plastic combines
the high quality hexagonal stainless steel insert with the blade tang of chromevanadium-molybdenum steel.
Safety screw SM4 × 20
2TLA020053R4200
Special safety screw to eliminate risk of manipulation. Lenght adapted for
Adam and Eva. 1 pcs M4 × 20 mm.
Safety screw SM4 × 25
2TLA020053R4300
Special safety screw to eliminate risk of manipulation. Lenght adapted for
Adam and Eva, E-version. 1 pcs M4 × 25 mm.
Smile 12 RF
2TLA030053R2600
Reset button in Smile enclosure, adapted for use with Eden DYN-Reset and
Eden OSSD‑Reset M12 5-pin connector.
Smile 12 RG
2TLA030053R2700
Reset button in Smile enclosure, adapted for use with Eden DYN-Reset and
Eden OSSD‑Reset M12 8-pin connector.
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
MKey5 - 12N
2TLA050003R0100
Safety interlock switch, 2NC / 1NO, full plastic body, 3 x M20 Conduits entries,
12N holding force, standard key.
MKey5+ - 40N
2TLA050003R0101
Safety interlock switch, 2NC / 1NO, full plastic body, 3 x M20 Conduits entries,
40N holding force, standard key.
MKey5 - 12N
2TLA050003R0110
Safety interlock switch, 2NC / 1NO, plastic body, stainless steel head, 3 x M20
Conduits entries, 12N holding force, standard key.
MKey5+ - 40N
2TLA050003R0111
Safety interlock switch, 2NC / 1NO, plastic body, stainless steel head, 3 x M20
Conduits entries, 40N holding force, standard key.
MKey - Interlock Switch
IMAGES
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  15
MKey8 - 24 VDC
2TLA050011R0132
Safety interlock switch, 2NC + 2NC, die cast housing and spring lock, 3 x M20
Conduits entries, 24 VDC, standard key.
MKey8Z - 24 VDC
2TLA050011R0122
Safety interlock switch, 2NC + 2NC, stainless steel housing and spring lock,
3 x M20 Conduits entries, 24 VDC, standard key.
MKey8M - 24 VDC
2TLA050013R0132
Safety interlock switch, 2NC + 2NC, die cast housing and magnetic lock,
3 x M20 Conduits entries, 24 VDC, standard key.
MKey9 - 24 VDC
2TLA050007R0112
Safety interlock switch, rugged polyester housing and spring lock, stainless
steel head, standard key, 1 x M20 Conduits entries, 24 VDC.
MKey9M - 24 VDC
(power to lock)
2TLA050009R0112
Safety interlock switch, rugged polyester housing and electro-magnetic lock,
stainless steel head, standard key, 1 x M20 Conduits entries, 24 VDC.
MKey 4,5 Std.
Key Plastic Head
2TLA050040R0201
Standard key to Safety Interlock Switch 4 and 5 with a plastic head (around the
key entrance). Stainless steel 316 key.
MKey 4,5,6,8,9 Std.
Key Metal Head
2TLA050040R0202
Standard key to Safety Interlock Switch 4, 5, 6, 8 and 9 with a stainless steel
head (around the key entrance). Stainless steel 316 key.
MKey 4,5,6,8,9
Flat Key
2TLA050040R0220
Flat key to Safety Interlock Switch 4, 5, 6, 8 and 9 with a stainless steel head
(around the key entrance). Stainless steel 316 key, plastic shroud.
MKey 4,5,6 Flex
Key Plastic
2TLA050040R0221
Flexible key to Safety Interlock Switch 4, 5 and 6 with a plastic head (around
the key entrance). Stainless steel 316 key, plastic housing.
MKey 4,5,6,8,9 Flex
Key Metal
2TLA050040R0203
Flexible key to Safety Interlock Switch 4, 5, 6, 8 and 9 with a stainless steel
head (around the key entrance). Stainless steel 316 key, die cast metal housing.
MKey 6,8,9 SS Flex
Key SS
2TLA050040R0204
Flexible key to Safety Interlock Switch 4, 5, 6, 8 and 9 with a stainless steel
head (around the key entrance). Stainless steel 316 key, stainless steel housing.
Sense - Magnetic Switch
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Sense7
2 m cable
2TLA050056R4100
Safety Magnetic Switch, 2NC / 1NO, plastic, LED, 2 m cable.
Sense7
5 m cable
2TLA050056R5100
Safety Magnetic Switch, 2NC / 1NO, plastic, LED, 5 m cable.
Sense7
10 m cable
2TLA050056R6100
Safety Magnetic Switch, 2NC / 1NO, plastic, LED, 10 m cable.
Sense7
Quick-connect
2TLA050056R2100
Safety Magnetic Switch, 2NC / 1NO, plastic, LED, 250 mm cable with
M12‑contact.
Sense7Z
5 m cable
2TLA050056R5120
Safety Magnetic Switch, 2NC / 1NO, stainless steel, LED, 5 m cable.
Sense7Z
10 m cable
2TLA050056R6120
Safety Magnetic Switch, 2NC / 1NO, stainless steel, LED, 10 m cable.
Sense7Z
Quick-connect
2TLA050056R2120
Safety Magnetic Switch, 2NC / 1NO, stainless steel, LED, 250 mm cable with
M12 contact.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  16
Magne – Magnetic process lock
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Magne 2A v2
2TLA042022R1600
Magnetic lock with safety sensor. Electro-magnet with 8-pole M12‑contact.
Anchor plate. Cell rubber. Adam (built-in) + Eva (free) door position sensor.
Magne 2B v2
2TLA042022R1800
Magnetic lock with indication. Electro-magnet with 8-pole M12-contact.
Anchor plate with permanent magnet. Cell rubber. Adam (built-in) + Eva
(included) door position sensor.
Magne 2Ax v2
2TLA042022R1700
Magnetic lock with indication. Electro-magnet with 5-pole M12-contact.
Anchor plate. Cell rubber. Adam (built-in) + Eva (included) door position
sensor.
Magne 2Bx v2
2TLA042022R1900
Magnetic lock with indication. Electro-magnet with 5-pole M12-contact.
Anchor plate with permanent magnet. Cell rubber. Adam (built-in) + Eva
(included) door position sensor.
Magne 3A
2TLA042022R2500
Electromagnet with 5-pole M12-contact. Holding force 1500N. IP67. Anchor
plate included. Cellular rubber included
Magne 3B
2TLA042022R2600
Electromagnet with 5-pole M12-contact. Holding force 1500N. IP67. Anchor
plate with permanent magnet included. Cellular rubber included.
Handle profile for
Magne
2TLA042023R0100
Aluminum profile used as both door handle and mounting kit for Magne.
Completely covers Magne unit when the door is closed.
JSM D21B
2TLA042023R0500
Mounting kit for Magne. For conventional door (5–15 mm door gap). Fits all
Magne. Note: When used with Magne 2A/B,–2Ax/Bx a mounting kit for Eva
is also required (JSM D24).
JSM D23
2TLA042023R0200
Mounting kit for Magne. For sliding door. Fits all Magne.
JSM D24
2TLA042023R0300
Mounting kit for Eva. For conventional door.
Magne Anchor Plate
32A
2TLA042023R1300
Spare part. Anchor plate A (without permanent magnet). Width 32 mm.
Included to Magne 1/2.
Magne Anchor Plate32B 2TLA042023R0400
Spare part. Anchor plate B (with permanent magnet). Width 32 mm.
Included to Magne 1/2.
JSM D27
Handle mounting kit
2TLA042023R1000
Handle/screw for JSM D21 Magne installation kit.
Magne cellular rubber
2TLA042023R3600
Spare part. Cellular rubber t=10 mm.
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Dalton L00
2TLA020038R3000
Ball latch only, no electrical functions.
Dalton M11
2TLA020038R3100
Lockable ball latch, 8-pin male plug.
Dalton M12
2TLA020038R3200
Lockable ball latch, 8-pin male plug, 5-pin female to Adam.
Dalton M31
2TLA020038R3300
Lockable ball latch, 5-pin male plug.
Dalton tongue A
2TLA020039R0800
Lock tongue for front entry.
Dalton tongue B
2TLA020039R1000
Lock tongue for top and bottom entry.
Dalton – Process lock
IMAGES
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  17
Dalton bracket 1
2TLA020039R0000
Fixing plates for Dalton and lock tongue.
Dalton bracket 2
2TLA020039R0100
Fixing plates for Dalton and Adam and also for lock tongue and Eva.
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Knox 1A-R v2
2TLA020105R5000
Knox door part for outward-opening door with hinges to the right.
Knox 1A-L v2
2TLA020105R5100
Knox door part for outward-opening door with hinges to the left.
Knox 1B-R v2
2TLA020105R5200
Knox door part for inward-opening door with hinges to the right. Lock housing
is mounted on inside of door.
Knox 1B-L v2
2TLA020105R5300
Knox door part for inward-opening door with hinges to the left. Lock housing
is mounted on inside of door.
Knox 1AX-R v2
2TLA020105R5800
Knox door part for outward-opening door with hinges to the right. With the
option for manual unlocking from the outside.
Knox 1AX-L v2
2TLA020105R5900
Knox door part for outward-opening door with hinges to the left. With the option
for manual unlocking from the outside.
Knox 1F-R v2
2TLA020105R6000
Knox door part for sliding door that opens to the right. Incl. additional fastening
fixtures for the frame.
Knox 1F-L v2
2TLA020105R6100
Knox door part for a sliding door that opens to the left. Incl. additional fastening
fixtures for the frame.
Knox 1BX-R v2
2TLA020105R6200
Knox door part for inward-opening door with hinges to the right. With the option
for manual unlocking from the outside. Lock housing is mounted on inside of door.
Knox 1BX-L v2
2TLA020105R6300
Knox door part for inward-opening door with hinges to the left. With the option for
manual unlocking from the outside. Lock housing is mounted on inside of door.
Knox 1FX-R v2
2TLA020105R6400
Knox door part for sliding door that opens to the right with the option for manual
unlocking from the outside. Incl. additional fastening fixtures for the frame.
Knox 1FX-L v2
2TLA020105R6500
Knox door part for sliding door that opens to the left with the option for manual
unlocking from the outside. Incl. additional fastening fixtures for the frame.
Knox 2A v2
2TLA020105R2200
Safety lock Knox frame part with 8-pin M12 contact. Delivered for door with hinges
to the right, but can be mirrored. See instructions for mirroring in Knox manual.
Knox 2X v2
2TLA020105R2300
Process lock version of Knox (no duplicate unlocking signal), with 5-pin M12
contact. Delivered for door with hinges to the right, but can be mirrored. See
instructions for mirroring in Knox manual.
Knox PC plate for mesh
door
2TLA020106R0000
When mounting Knox on door with mesh the accessory PC plate for Knox is
recommended. This is to avoid emergency opening from the outside.
Knox Escutcheon plate
2TLA020106R0600
When mounting Knox on a low door it is recommended to replace emergency
release handle to prevent opening from the outside by reaching over.
Knox Shear Pin
2TLA020106R0800
Spare part for Knox outer handle.
Knox man. unlock.
seal-label
2TLA020106R0700
Extra seal labels for Knox with manual unlock. 10 pcs per package.
Knox silver handle
2TLA020106R0900
Knox silver handle. Spare part.
Knox red handle
2TLA020106R1000
Knox red handle. Spare part.
Knox – Safety and process lock
IMAGES
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  18
Accessories for process lock
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Panic Exit Device
P-1165
2TLA040033R7000
Panic Exit Device P-1165 black/green. The device can be used on conventional
doors with 600-1270mm openings. The panic device is suitable for both rightand left-hand doors.
Lever Handle for Panic
Exit Dev. P-1165
2TLA040033R7100
Lever Handle for Panic Exit Device P-1165. Handle is pre-set for left-hand doors
when delivered, it can easily be set for right-hand doors. Three keys are included.
Mounting kit for Panic
Exit Dev. P-1165
2TLA040033R7200
Mounting kit for Panic Exit Dev. P-1165. The brackets are made in stainless
steel and delivered pre-assembled with screws.
Tina 12A
2TLA020054R1800
Connection block with adaption unit for dynamic circuits. Two M12 8-pole
connectors for sensor input. For example Dalton and Magne locks.
M12-CT0214
2TLA020060R0100
Transfer cable, 20 cm 8/5 × 0.34 mm2 + screen with straight M12 8-pole female
+ 5-pole male connectors. Screen connected to pin7 (0VDC) on male connector.
Can be used for connection of Dalton to URAX or Tina 4/8.
M12-CT0212M
2TLA020060R0700
Transfer cable, 20 cm 5 × 0.34 mm2 +screen with straight M12 5-pole
male + 5-pole female connectors. Screen connected to pin3 (0VDC) on male
connector. Can be used when connecting Magne 1 to a non-safe output on URAX.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  19
Control devices
Safeball – One hand devices
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSTD1-A
Safeball 2 m cable
2TLA020007R3000
JSTD1-A Safeballs each have 1NO & 1NC independent switches, maximum
load of 30 VDC - 2A resistive. Ergonomic design with several grip possibilities
and low activation force (approx. 2N) and flexible mounting options. Provides
highest level of safety for use in two hand control applications when using two
Safeballs in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67
protection degree, plastic body, 2 meters molded cable.
JSTD1-B
Safeball 200 mm cable
2TLA020007R3100
JSTD1-B Safeballs each have 1NO & 1NC independent switches, maximum load
of 30 VDC - 2A resistive. Ergonomic design with several grip possibilities and
low activation force (approx. 2N) and flexible mounting options. Provides highest
level of safety for use in two hand control applications when using two Safeballs
in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67 protection
degree, plastic body, 0.2 m wires × 4 for direct connection into an enclosure.
JSTD1-C
Safeball 10 m cable
2TLA020007R3200
JSTD1-C Safeballs each have 1NO & 1NC independent switches, maximum
load of 30 VDC - 2A resistive. Ergonomic design with several grip possibilities
and low activation force (approx. 2N) and flexible mounting options. Provides
highest level of safety for use in two hand control applications when using two
Safeballs in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67
protection degree, plastic body, 10 meters molded cable.
JSTD1-E
Safeball 1NO+1NO
200 mm cable
2TLA020007R3400
JSTD1-E Safeballs each have 2NO independent switches, maximum load of
30 VDC - 2A resistive. Ergonomic design with several grip possibilities and low
activation force (approx. 2N) and flexible mounting options. Provides highest
level of safety for use in two hand control applications when using two Safeballs
in conjunction with a JSBR4 safety relay or Pluto Safety PLC. IP67 protection
degree, plastic body, 0.2 m wires × 4 for direct connection into an enclosure.
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSTD20A
Twohand station
2TLA020007R2000
Two-hand device with conventional operating buttons. Operating push buttons
are 60 mm in diameter, black, 9N operating force, 1 NO + 1 NC contacts, rated
current of 10A. Buttons are mounted in black painted steel housing designed
for two-hand applications. IP65. Terminal blocks within housing for connection
to buttons. Highest level of safety can be achieved when using in conjunction
with a JSBR4 safety relay for two-hand buttons or a Pluto Safety PLC.
JSTD20C
Twohand station
housing
2TLA020007R2200
Two-hand housing only. Steel and black painted. Accepts up to 60  mm operating
buttons for two-hand device and 40 mm e-stop button.
JSTD25F
Twohand station,
5-pole M12 Male
2TLA020007R6000
Two-hand device with JSTD1-B Safeballs. Buttons are side mounted 44 × 88
extruded aluminum profile designed for two hand applications. Pre-wired to a
M12 5-pin connector with protective flanges of the safeballs. Highest level of
safety can be achieved when used in conjunction with a JSBR4 safety relay or
Pluto Safety PLC.
JSTD25H
Twohand station,
8-pole M12 Male
2TLA020007R6300
Two-hand device with JSTD1-B Safeballs. Buttons are side mounted 44 × 88
extruded aluminum profile designed for two hand applications. Pre-wired to a
M12 8-pin connector with protective flanges of the safeballs. Highest level of
safety can be achieved when used in conjunction with a JSBR4 safety relay or
Pluto Safety PLC.
JSTD25P-1
Twohand station
2TLA020007R6500
Two-hand device with JSTD1-B Safeballs. Safeballs each have 1NO & 1NC
independent switches, maximum load of 30 VDC - 2A resistive. Ergonomic
design with several grip possibilities and low activation force (approx. 2N).
Buttons are side mounted on black aluminum profile designed for two-hand
applications. Pre-wired to a 9-pin Zylin connector with dual protective flanges
of the safeballs. Integrated Eva inside housing for Eden sensor suspension
shelf JSM C14. Highest level of safety can be achieved when used in
conjunction with a JSBR4 safety relay or Pluto Safety PLC.
JSTK0-A
2TLA020007R6600
JSTK0-A Connector for JSTD25P-1.
JSTK40S
2TLA020007R6700
JSTK40S Spiral cable 4 m for JSTD25P-1.
JSTK80S
2TLA020007R6800
JSTK80S Spiral cable 8 m for JSTD25P-1.
Universal shelf for
JSTD25P-1.
2TLA020007R8000
Universal shelf for JSTD25P-1.
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSHD4-1
2TLA020006R2100
Three-position device.
Safeball – Two hand devices
IMAGES
JSHD – Top units
IMAGES
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  20
JSHD4-2
2TLA020006R2200
Three-position device incl. LEDs, front button and top button.
JSHD4-3
2TLA020006R2300
Three-position device incl. LEDs.
JSHD4-4
2TLA020006R2400
Three-position device incl. LEDs and front button.
JSHD4-5
2TLA020006R2500
Three-position device incl. LEDs and top button.
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSHD4 bottom part AA
2TLA020005R1000
Bottom part with cable gland.
JSHD4 bottom part AB
2TLA020005R1100
Bottom part with Cannon connection.
JSHD4 bottom part AC
2TLA020005R1200
Bottom part with M12 connection (5 poles).
JSHD4 bottom part AD
2TLA020005R1300
Bottom part with M12 connection (8 poles).
JSHD4 bottom part AE
2TLA020005R1400
Bottom part with M12 connection (8 poles) and emergency stop.
JSHD4 bottom part AF
2TLA020005R1500
Bottom part with M12 connection (4 poles) and 2 AS-i nodes (for front and
top button).
JSHD4 bottom part AG
2TLA020005R1600
Bottom part with M12 connection (4 poles) and 1 AS-i node (without front and
top button).
JSHD4 bottom part AH
2TLA020005R1700
Bottom part with cable gland and PCB with 10 screw connections.
JSHD4 bottom part AJ
2TLA020005R1800
Bottom part with cable gland and PCB with 16 screw connections.
JSHD – Bottom part
IMAGES
JSHD – Three position device and button
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSHD2C type A
2TLA020001R1100
JSHD2C type A 3-position pushbutton, 3 cables 190 mm, Au, IP40.
JSHD2C type E
2TLA020001R1000
JSHD2C type E 3-position pushbutton, 3 cables 200 mm, Au, IP54.
JSHD2C type F
2TLA020001R1400
JSHD2C type F 3-position pushbutton, 3 cables 850 mm, Au, IP54.
JSHD2C type K
2TLA020001R1300
JSHD2C type K 3-position pushbutton, 2 cables 290 mm, Ag, IP54.
JSHD4-1-AA
2TLA019995R0000
Three-position device with cable gland.
JSHD4-1-AC
2TLA019995R0100
Three-position device with M12 connection (5 poles).
JSHD4-2-AB
2TLA019995R0200
Three-position device incl. LEDs, front button and top button with Cannon
connection.
JSHD4-2-AB-A
2TLA019995R0300
Three-position device incl. LEDs, front button and top button with Cannon
connection and Anti‑tamper PCB.
JSHD4-2-AD
2TLA019995R0400
Three-position device incl. LEDs, front button and top button with M12
connection (8 poles).
JSHD4-2-AD-A
2TLA019995R0500
Three-position device incl. LEDs, front button and top button with M12
connection (8 poles) and Anti‑tamper PCB.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  21
JSHD4-2-AF
2TLA019995R0600
Three-position device incl. LEDs, front button and top button with M12
connection (4 poles) and 2 AS-i nodes (for front and top button).
JSHD4-2-AF-A
2TLA019995R0700
Three-position device incl. LEDs, front button and top button with M12
connection (4 poles) and 2 AS-i nodes (for front and top button) and
Anti‑tamper PCB.
JSHD4-2-AH
2TLA019995R0800
Three-position device incl. LEDs, front button and top button with cable
gland and PCB with 10 screw connections.
JSHD4-2-AH-A
2TLA019995R0900
Three-position device incl. LEDs, front button and top button with cable
gland and PCB with 10 screw connections and Anti‑tamper PCB.
JSHD4-2-AJ
2TLA019995R1000
Three-position device incl. LEDs, front button and top button with cable
gland and PCB with 16 screw connections.
JSHD4-2-AJ-A
2TLA019995R1100
Three-position device incl. LEDs, front button and top button with cable gland
and PCB with 16 screw connections and Anti‑tamper PCB.
JSHD4-3-AB
2TLA019995R1200
Three-position device incl. LEDs with cable gland.
JSHD4-3-AB-A
2TLA019995R1300
Three-position device incl. LEDs with cable gland and Anti‑tamper PCB.
JSHD4-3-AD
2TLA019995R1400
Three-position device incl. LEDs with M12 connection (8 poles).
JSHD4-3-AD-A
2TLA019995R1500
Three-position device incl. LEDs with M12 connection (8 poles) and
Anti‑tamper PCB.
JSHD4-3-AE
2TLA019995R1600
Three-position device incl. LEDs with M12 connection (8 poles) and
emergency stop.
JSHD4-3-AF
2TLA019995R1700
Three-position device incl. LEDs with M12 connection (4 poles) and 2 AS-i
nodes (for front and top button).
JSHD4-3-AF-A
2TLA019995R1800
Three-position device incl. LEDs with M12 connection (4 poles) and 2 AS-i
nodes (for front and top button) and Anti‑tamper PCB.
JSHD4-3-AG
2TLA019995R1900
Three-position device incl. LEDs with M12 connection (4 poles) and 1 AS-i
node (without front and top button).
JSHD4-3-AH
2TLA019995R2000
Three-position device incl. LEDs with cable gland and PCB with 10 screw
connections.
JSHD4-3-AH-A
2TLA019995R2100
Three-position device incl. LEDs with cable gland and PCB with 10 screw
connection and Anti‑tamper PCB.
JSHD4-3-AJ
2TLA019995R2200
Three-position device incl. LEDs with cable gland and PCB with 16 screw
connections.
JSHD4-3-AJ-A
2TLA019995R2300
Three-position device incl. LEDs with cable gland and PCB with 16 screw
connections and Anti‑tamper PCB.
JSHD4-4-AB
2TLA019995R2400
Three-position device incl. LEDs and front button with Cannon connection.
JSHD4-4-AB-A
2TLA019995R2500
Three-position device incl. LEDs and front button with Cannon connection
and Anti-tamper PCB.
JSHD4-4-AD
2TLA019995R2600
Three-position device incl. LEDs and front button with M12 connection
(8 poles).
JSHD4-4-AD-A
2TLA019995R2700
Three-position device incl. LEDs and front button with M12 connection
(8 poles) and Anti-tamper PCB.
JSHD4-4-AF
2TLA019995R2800
Three-position device incl. LEDs and front button with M12 connection
(4 poles) and 2 AS-i nodes (for front and top button).
JSHD4-4-AF-A
2TLA019995R2900
Three-position device incl. LEDs and front button with M12 connection
(4 poles) and 2 AS-i nodes (for front and top button) and Anti-tamper PCB.
JSHD4-4-AH
2TLA019995R3000
Three-position device incl. LEDs and front button with cable gland and PCB
with 10 screw connection.
JSHD4-4-AH-A
2TLA019995R3100
Three-position device incl. LEDs and front button with cable gland and PCB
with 10 screw connection and Anti‑tamper PCB.
JSHD4-4-AJ
2TLA019995R3200
Three-position device incl. LEDs and front button with cable gland and PCB
with 16 screw connections.
JSHD4-4-AJ-A
2TLA019995R3300
Three-position device incl. LEDs and front button with cable gland and PCB
with 16 screw connections and Anti‑tamper PCB.
JSHD4-5-AB
2TLA019995R3400
Three-position device incl. LEDs and top button with Cannon connection.
JSHD4-5-AB-A
2TLA019995R3500
Three-position device incl. LEDs and top button with Cannon connection
and Anti‑tamper PCB.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  22
JSHD4-5-AD
2TLA019995R3600
Three-position device incl. LEDs and top button with M12 connection
(8 poles).
JSHD4-5-AD-A
2TLA019995R3700
Three-position device incl. LEDs and top button with M12 connection
(8 poles) and Anti-tamper PCB.
JSHD4-5-AF
2TLA019995R3800
Three-position device incl. LEDs and top buttonwith M12 connection
(4 poles) and 2 AS-i nodes (for front and top button).
JSHD4-5-AF-A
2TLA019995R3900
Three-position device incl. LEDs and top buttonwith M12 connection
(4 poles) and 2 AS-i nodes (for front and top button) and Anti-tamper PCB.
JSHD4-5-AH
2TLA019995R4000
Three-position device incl. LEDs and top button with cable gland and PCB
with 10 screw connection.
JSHD4-5-AH-A
2TLA019995R4100
Three-position device incl. LEDs and top button with cable gland and PCB
with 10 screw connection and Anti‑tamper PCB.
JSHD4-5-AJ
2TLA019995R4200
Three-position device incl. LEDs and top button with cable gland and PCB
with 16 screw connections.
JSHD4-5-AJ-A
2TLA019995R4300
Three-position device incl. LEDs and top button with cable gland and PCB
with 16 screw connections and Anti‑tamper PCB.
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Fox 221
2TLA020160R4100
1 pedal safety foot switch with two positions. Robust metal housing.
Fox 222
2TLA020160R4200
2 pedal safety foot switch with two positions. Robust metal housing.
Fox 231
2TLA020160R3100
1 pedal safety foot switch with three positions. Reset function for buttom
position. Robust metal housing.
Fox 232
2TLA020160R3200
2 pedal safety foot switch with three positions. Reset function for buttom
position. Robust metal housing.
Fox
IMAGES
Accessories for Control Devices
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSM C5
2TLA020007R0900
Accessories Safeball. Ball & socket for flexible mount for mounting the
Safeball to Enclosures, machines or table tops.
Safeball protection coat
2TLA020007R1900
Extra protection coat for Safeball.
Protective plates
2TLA020007R6400
Protective plates for Safeball (kit) including fasteners.
JSM C7
2TLA020007R1200
JSM C7 Suspension shelf for JSTD25 F/G/H.
JSHD4H2A
2TLA020002R0200
JSHD4H2A Three-position control device for external panel mounting.
JSHD4H2
2TLA020002R3100
JSHD4H2 Three-position control device for internal panel mounting.
JSM55
2TLA040005R0500
JSM55 Wall bracket for three position device.
JSM5B
2TLA040005R0700
JSM5B Wall bracket for 2 JSNY5 (ordered separately).
JSHD4 protection coat
2TLA020200R4600
Extra protection coat for JSHD4.
JSHK0
2TLA020003R0300
Accessories JSHD4. 12-pole female Cannon connector for cable mounting.
JSHK1-B
2TLA020003R0900
Accessories JSHD4. 12-pole male Cannon connector for cable mounting.
JSHK1-A
2TLA020003R0800
Accessories JSHD4. 12-pole female Cannon connector for cabinet
mounting.
JSHK1-C
2TLA020003R0700
Accessories JSHD4. 12-pole male Cannon connector for cabinet mounting.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  23
HK5
2TLA020003R4700
HK5 Cable 5 m and Cannon connection.
HK10
2TLA020003R4800
HK10 Cable 10 m and Cannon connection.
HK20
2TLA020003R4900
HK20 Cable 20 m and Cannon connection.
HK16S4
2TLA020003R5000
HK16S4 spiral cable 1.6 m and Cannon connection.
HK20S4
2TLA020003R5100
HK20S4 spiral cable 2.0 m and Cannon connection.
HK32S4
2TLA020003R5200
HK32S4 spiral cable 3.2 m and Cannon connection.
HK40S4
2TLA020003R3500
HK40S4 spiral cable 4.0 m and Cannon connection.
HK60S4
2TLA020003R3600
HK60S4 spiral cable 6.0 m and Cannon connection.
HK80S4
2TLA020003R5300
HK80S4 spiral cable 8.0 m and Cannon connection.
HKC12
2TLA020003R5500
HKC12 Cable 12 × 0.25 cut to length.
JSHD4 Anti-tamper
PCBA
2TLA020005R0900
Accessories JSHD4. Anti-tamper PCB. Works with top part JSHD4-2 to
JSHD4-5, combined with botten part AB, AD, AF, AG, AH or AJ.
JSM 50G
2TLA020205R6300
Accessories JSHD4. Big Bottom plate. Makes it possible to mount Safety
Interlock Keys on the JSHD4 to ensure the tree-position device postition
when not in use. Works with the bracket JSM5B.
JSM 50H
2TLA020205R6400
Accessories JSHD4. Makes it possible to mount the non-contact sensor
Eden (Eva-part) on the JSHD4 to ensure the tree-position device postition
when not in use.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  24
Emergency stops and Pilot devices
INCA
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
INCA 1 Tina
2TLA030054R0000
Emergency stop button for panel mounting, 22.5 mm holes, Tina adaption
unit included for dynamic ciruit, Status LED in button, terminal blocks.
INCA 1
2TLA030054R0100
Emergency stop button for panel mounting, 22.5 mm holes, 2 × NC, Status
LED in button, terminal blocks.
INCA 1S Tina
2TLA030054R0200
Machine stop (Black button) for panel mounting, 22.5 mm holes, Tina
adaption unit included for dynamic ciruit, Status LED in button, terminal
blocks.
INCA 1S
2TLA030054R0300
Machine stop (Black button) for panel mounting, 22.5 mm holes, 2 × NC,
Status LED in button, terminal blocks.
Smile
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Smile 10 EA
2TLA030051R0400
Emergency stop in Smile enclosure, 2 × NC, Status LED in button, 1 m
5-pole cable out of bottom.
Smile 10 EA Tina
2TLA030050R0400
Emergency stop in Smile enclosure, Tina adaption unit included for dynamic
ciruit, Status LED in button, 1 m 5-pole cable out from bottom.
Smile 10 EK
2TLA030051R0600
Emergency stop in Smile enclosure, 2 × NC, 1 m 4-pole cable out of
bottom.
Smile 11 EA
2TLA030051R0000
Emergency stop in Smile enclosure, 2 × NC, Status LED in button, 1 × M12
5-pin male connector.
Smile 11 EA AS-i
2TLA030052R0000
Emergency stop in Smile enclosure, adapted for AS-i system, programable
status LED in button, 1 × M12 5-pin male connector.
Smile 11 EA Tina
2TLA030050R0000
Emergency stop in Smile enclosure, Tina adaption unit included for dynamic
ciruit, Status LED in button, 1 × M12 5-pin male connector.
Smile 11 EAR
2TLA030051R0100
Emergency stop in Smile enclosure, 2 × NC, Status LED in button, 1 × M12
5-pin male connector, reversed button attachement (from bottom).
Smile 11 EAR Tina
2TLA030050R0100
Emergency stop in Smile enclosure, Tina adaption unit included for dynamic
ciruit, Status LED in button, 1 × M12 5-pin male connector, reversed button
attachement (from bottom).
Smile 11 RA
2TLA030053R0000
Reset button in Smile enclosure, 1 × NO button, 1 × Blue LED, 1 × M12
5-pin male connector.
Smile 11 RB
2TLA030053R0100
Reset button in Smile enclosure, Pluto Lightbutton connection,
1 button+Blue LED, 1 × M12 5-pin male connector.
Smile 12 RF
2TLA030053R2600
Reset button in Smile enclosure, adapted for use with Eden DYN-Reset and
Eden OSSD‑Reset M12 5-pin connector.
Smile 12 RG
2TLA030053R2700
Reset button in Smile enclosure, adapted for use with Eden DYN-Reset and
Eden OSSD‑Reset M12 8-pin connector.
Smile 11 SA
2TLA030051R0900
Machine stop (Black button) in Smile enclosure, 2 × NC, Status LED in
button, 1 × M12 5-pin male connector.
Smile 11 SA Tina
2TLA030050R0500
Machine stop (Black button) in Smile enclosure, Tina adaption unit included
for dynamic ciruit, Status LED in button, 1 × M12 5-pin male connector.
Smile 11 SAR
2TLA030051R1100
Machine stop (Black button) in Smile enclosure, 2 × NC, Status LED in button,
1 × M12 5-pin male connector, reversed button attachement (from bottom).
Smile 12 EA
2TLA030051R0200
Emergency stop in Smile enclosure, 2 × NC, Status LED in button, 1 × M12
5-pin male connector and 1 × M12 5-pin female connector.
Smile 12 EA Tina
2TLA030050R0200
Emergency stop in Smile enclosure, Tina adaption unit included for dynamic
ciruit, Status LED in button, 1 × M12 5-pin male connector and 1 × M12
5-pin female connector.
Smile 12 SAR Tina
2TLA030050R0800
Machine stop (Black button) in Smile enclosure, Tina adaption unit included
for dynamic ciruit, Status LED in button, 1 × M12 5-pin male connector
and 1 × M12 5-pin female connector, reversed button attachement (from
bottom).
Smile 41 WWWWP
2TLA030057R0000
Push button box according to Smile design with 4 buttons. The box is
adapted for connection to Pluto IQ using lightbutton function. Connection
via a M12 8-pin male connector.
Smile 41 EWWWP
2TLA030057R0100
Push button box according to Smile design with 4 buttons, one of which
is an emergency stop. The box is adapted for connection to Pluto IQ using
lightbutton function. Connection via a M12 8-pin male connector.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  25
Smile 41 WWWW4 ASi
2TLA030056R0000
Push button box according to Smile design with 4 buttons. The box is
adapted for AS-i system. The buttons have programable status LED in
button. Connection via a M12 5-pin male connector.
Smile 41 EWWW4 ASi
2TLA030056R0100
Push button box according to Smile design with 4 buttons, one of which
is an emergency stop. The box is adapted for AS-i system. The buttons
have programable status LED in button. Connection via a M12 5-pin male
connector.
Smile 41 EKWW4 ASi
2TLA030056R0200
Push button box according to Smile design with 4 buttons, one of which
is an emergency stop and another a safe key switch. The box is adapted
for AS-i system. The buttons have programable status LED in button.
Connection via a M12 5-pin male connector.
Accessories for Smile and INCA
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Yellow surround for Inca
2TLA030054R0400
Elevated yellow surround for panel mounted emergency stop button.
Emergency Stop Sign
2TLA030054R0500
ellow surround for panel mounted emergency stop button, for 22.5 mm
Y
hole, with text in Swedish, Danish and Finnish.
2TLA030054R0600
ellow surround for panel mounted emergency stop button, for 22.5 mm
Y
hole, with text in English, French and German.
2TLA030054R0700
ellow surround for panel mounted emergency stop button, for 32.5 mm
Y
hole, with text in Swedish, Danish and Finnish.
2TLA030054R0800
ellow surround for panel mounted emergency stop button, for 32.5.5 mm
Y
hole, with text in English, French and German.
2TLA030054R0900
Yellow surround for panel mounted emergency stop button, for 22.5 mm hole.
2TLA030054R1000
Yellow surround for panel mounted emergency stop button, for 32.5 mm hole.
2TLA030051R1300
Termination for Smile 12, M12 5-pole connector, connects pin 1 with pin 5,
and pin 2 with pin 4.
JST2
Emergency stop EStrongZ and Grab wire safety switch LineStrong
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
EStrongZ
2TLA050220R0020
Emergency stop, 2NC / 2NO, stainless steel 316 body, conduit entry
3 x M20.
EStrongZ (LED)
2TLA050220R0222
Emergency stop, 2NC / 2NO, stainless steel 316 body, LED status
indication, conduit entry 3 x M20.
LineStrong1
2TLA050200R0030
Emergency stop grab wire safety switch, 2NC + 2NO, up to 50 m length, die
cast housing, conduit entry 3 x M20.
LineStrong2Z
2TLA050202R0332
Emergency stop grab wire safety switch, 2NC + 2NO, up to 100 m length,
stainless steel 316 body, LED status indication, conduit entry 3 x M20.
LineStrong3L
2TLA050206R0332
Emergency stop grab wire safety switch, 4NC + 2NO, switch placement to
the left, up to 125 m length, yellow die cast housing, LED status indication,
conduit entry 3 x M20
LineStrong3R
2TLA05028R0332
Emergency stop grab wire safety switch, 4NC + 2NO, Switch placement to
the right, up to 125 m length, yellow die cast housing, LED status indication,
conduit entry 3 x M20.
LineStrong3D
2TLA050204R0332
Emergency stop grab wire safety switch, 4NC + 4NO, entries from both
sides of the grab wire switch, up to 250 m length, yellow die cast housing,
LED status indication, conduit entry 3 x M20.
10 m Wire Kit,
Galvanized
2TLA050210R0130
10 m galvanized wire pull kit. Includes 10 m wire (one end is terminated with
thimble and permanent clamp), 5 pcs eyebolts, 1 pcs tensioner, 1 pcs allen
key.
20 m Wire Kit,
Galvanized
2TLA050210R0330
20 m galvanized wire pull kit. Includes 20 m wire (one end is terminated with
thimble and permanent clamp), 9 pcs eyebolts, 1 pcs tensioner, 1 pcs allen
key.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  26
80 m Wire Kit,
Galvanized
2TLA050210R0630
80 m galvanized wire pull kit. Includes 80 m wire, 30 pcs eyebolts, 2 pcs
tensioner, 1 pcs allen key.
100 m Wire Kit,
Galvanized
2TLA050210R0730
100 m galvanized wire pull kit. Includes 100 m wire, 37 pcs eyebolts, 2 pcs
tensioner, 1 pcs allen key.
Wire Tensioner,
Galvanized
2TLA050210R4030
Wire tensioner/gripper for emergency pull wire switch systems, galvanized.
Corner pulley,
Galvanized
2TLA050210R6030
Corner pulley for emergency pull wire switch systems, galvanized. For
navigating corners, both inside and outside.
Eyebolt M8x1.25,
Galvanized
2TLA050210R8030
Eyebolt M8 x 1.25 for emergency pull wire switch systems, galvanized.
Spring, 220mm,
Stainless Steel
2TLA050211R0004
Spring for emergency pull wire switch systems, 220 mm, stainless steel.
When using one emergency pull wire switch the wire should be anchored at
the other end using this spring.
Screwdriver,
Torx T20
2TLA050211R0006
Screwdriver, Anti-Tamper, Torx T20
Gland M20 x 1.5
2TLA050040R0002
Gland M20 x 1.5
Conduit Plug M20 x 1.5
2TLA050040R0004
Conduit plug M20 x 1.5
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  27
Accessories, connectors and cables
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
Tina 12A
2TLA020054R1800
Connection block with adaption unit for dynamic circuits. Two M12 8-pole
connectors for sensor input. For example Dalton and Magne locks.
M12-3A
2TLA020055R0000
M12 Y connector for series connection of dynamic safety devices such as
Eden Sensors, Smile E-Stops, Inca E-Stops, Spot Single Beams, and Tina
Dynamic Adapters. 5-pole M12 female connector (2) for connection of the
safety device, 5-pole M12 male connector (1) for connecting 24 VDC, 0 VDC
and the dynamic transmit signal to the field devices and 5-pole M12 female
connector (3) for either the continuation of the circuit or the return of the
dynamic receive signal to the Vital 1/Pluto controller.
M12-3B
2TLA020055R0100
M12 Y connector for the parallel connection of 2 pcs of dynamic safety
devices such as Eden Sensors, Spot Signal Beams and Tina Dynamic
Adapters. Two 5-pole M12 female connectors (2.3) for connection of the
safety devices and one 5-pole M12 male connector (1) for connection to the
Vital 1/Pluto controller.
M12-3D
2TLA020055R0300
M12 Y connector for easy installation of Light Grids and Light Curtains
Transmitter and receiver. One M12 8-pole female connector for connection of
the Focus Receiver (1), one M12 5-Pole female connector (3) for connection
of the Focus Transmitter and one M12 8-pole male connector (1) for cabling
to safety control unit.
M12-3E
2TLA020055R0200
M12 Y connector for the connection of 2 different safety or non-safety
circuits in one cable. One 5-pole M12 female connector (2) for connection
of the first circuit. One 5-pole M12 female connector (3) for connection of
the second circuit. 5-pole M12 male connector (1) for connection to IQs on
the Pluto controller.
M12-3G
2TLA020055R0700
M12 Y connector for series connection of Eden OSSD safety sensor. 8-pole
M12 female connector(2) for connection of the safety device, 8-pole M12 male
connector(1) for connecting 24VDC, 0VDC and the OSSD signals to the field
devices and 8-pole M12 female connector(3) for either the continuation of the
circuit or the return of the signals to the safety controller.
M12-3H
2TLA020055R0800
M12 Y connector for series connection of safety devices such as Eden OSSD
sensors. 8-pole M12 female connector(2) for connection of the safety device,
5-pole M12 male connector(1) for connecting 24VDC, 0VDC and the OSSD
signals to the field devices and 5-pole M12 female connector (3) for either the
continuation of the circuit or the return of the signals to the safety controller.
M12-C61
2TLA020056R0000
6 m cable 5 × 0.34 mm2 + screen with straight M12 female connector.
M12-C101
2TLA020056R1000
10 m cable 5 × 0.34 mm2 + screen with straight M12 female connector.
M12-C201
2TLA020056R1400
20 m cable 5 × 0.34 mm2 + screen with straight M12 female connector.
M12-C61 V
2TLA020056R0100
6 m cable 5 × 0.34 mm2 + screen with angled M12 female connector.
M12-C101 V
2TLA020056R1100
10 m cable 5 × 0.34 mm2 + screen with angled M12 female connector.
M12-C62
2TLA020056R0200
6 m cable 5 × 0.34 mm2 + screen with straight M12 male connector. Screen
connected to pin3 (0VDC) on male connector.
M12-C102
2TLA020056R1200
10 m cable 5 × 0.34 mm2 + screen with straight M12 male connector. Screen
connected to pin3 (0 VDC) on male connector.
M12-C00612
2TLA020056R6300
60 mm cable 5 x 0.34 mm2 + screen with straight M12 female + male
connectors. Screen connected to pin3 (0VDC) on male connector.
M12-C0312
2TLA020056R5800
300 mm cable 5 x 0.34 mm2 + screen with straight M12 female + male
connectors. Screen connected to pin3 (0VDC) on male connector.
M12-C112
2TLA020056R2000
1 m cable 5 × 0.34 mm2 + screen with straight M12 female + male
connectors. Screen connected to pin3 (0 VDC) on male connector.
M12-C312
2TLA020056R2100
3 m cable 5 × 0,.34 mm2 + screen with straight M12 female + male
connectors. Screen connected to pin3 (0 VDC) on male connector.
M12-C612
2TLA020056R2200
6 m cable 5 × 0.34 mm2 + screen with straight M12 female + male
connectors. Screen connected to pin3 (0 VDC) on male connector.
M12-C1012
2TLA020056R2300
10 m cable 5 × 0.34 mm2 + screen with straight M12 female + male
connectors. Screen connected to pin3 (0 VDC) on male connector.
M12-C2012
2TLA020056R2400
20 m cable 5 × 0.34 mm2 + screen with straight M12 female + male
connectors. Screen connected to pin3 (0 VDC) on male connector.
M12-C63
2TLA020056R3000
6 m cable 8 × 0.34 mm2 + screen with straight M12 female connector.
M12-C103
2TLA020056R4000
10 m cable 8 × 0.34 mm2 + screen with straight M12 female connector.
M12-C203
2TLA020056R4100
20 m cable 8 × 0.34 mm2 + screen with straight M12 female connector.
M12-C00634
60 mm kabel
2TLA020056R6400
60 mm cable 8 x 0.34 mm2 + screen with straight M12 female + male
connectors. Screen connected to pin7 (0VDC) on male connector.
M12-C134
2TLA020056R5000
1 m cable 8 × 0.34 mm2 + screen with straight M12 female + male
connector. Screen connected to pin7 (0 VDC) on male connector.
M12-C334
2TLA020056R5100
3 m cable 8 × 0.34 mm2 + screen with straight M12 female + male
connectors. Screen connected to pin7 (0 VDC) on male connector.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  31
M12-CT0214
2TLA020060R0100
Transfer cable, 20 cm 8/5 × 0.34 mm2 + screen with straight M12 8-pole
female + 5-pole male connectors. Screen connected to pin7 (0 VDC) on male
connector. Can be used for connection of Dalton to URAX or Tina 4/8.
M12-CT134
2TLA020060R0300
Transfer cable, 1 m 8 × 0.34 mm2 +screen with straight M12 8-pole male
+ 8-pole female connectors. Screen connected to pin7 (0 VDC) on male
connector. Can be used when FMC need to direct muting signals to Pluto
instead of Focus. Muting is then made in Pluto.
M12-CT0212
2TLA020060R0400
Transfer cable, 20 cm 5 × 0.34 mm2 + screen with straight M12 5-pole
female + 5-pole male connectors. Screen connected to pin3 (0 VDC) on
male connector. Can be used for connection of dynamic sensors to a
Tina4/8 were the ”info-pin” for each M12 connector works like a individual
safe signal. Note! Only allowed when connected to a Pluto IQ input.
M12-CT0212M
2TLA020060R0700
Transfer cable, 20 cm 5 × 0.34 mm2 +screen with straight M12 5-pole
male + 5-pole female connectors. Screen connected to pin3 (0 VDC) on
male connector. Can be used when connecting Magne 1 to a non-safe
output on URAX.
C5
2TLA020057R0000
Cable 5 × 0.34 mm2 + screen, specify length.
C8
2TLA020057R1000
Cable 8 × 0.34 mm2 + screen, specify length.
C9
2TLA020057R1500
Cable 7 × 0.5 mm2 + 2 × 0.75 mm2 + screen, specify length. For Tina 4A.
C13
2TLA020057R2000
Cable 11 × 0.5 mm2 + 2 × 0.75 mm2 + screen,specify length. For Tina 8A.
HKC12
2TLA020003R5500
HKC12 Cable 12 × 0.25 cut to length.
M12-C01
2TLA020055R1000
Straight M12 female connector with cable screw connection. Cable diameter
range 2.5–6.5 mm. 5-pole.
M12-C02
2TLA020055R1100
Straight M12 male connector with cable screw connection. Cable diameter
range 2.5–6.5 mm. 5-pole.
M12-C03
2TLA020055R1600
Straight M12 female connector with cable screw connection. Cable diameter
range 2.5–6.5 mm. 8-pole.
M12-C04
2TLA020055R1700
Straight M12 male connector with cable screw connection. Cable diameter
range 2.5–6.5 mm. 8-pole.
M12, protection cap
2TLA020055R2100
Protect the M12 male connector from dust.
JSSP-1
2TLA022070R0000
JSSP-1 M12. Protection cap for female connector.
Safety screw SM4 × 20
2TLA020053R4200
Special safety screw to eliminate risk of manipulation. Lenght adapted for
Adam & Eva. 1 pcs M4 × 20 mm.
Safety screw SM4 × 25
2TLA020053R4300
Special safety screw to eliminate risk of manipulation. Lenght adapted for
Adam & Eva, E-version. 1 pcs M4 × 25 mm.
Safety nut M4
2TLA020053R0400
Special safety nut to eliminate risk of manipulation. M4.
Safety nut M5
2TLA020053R0500
Special safety nut to eliminate risk of manipulation. M5.
SBIT Safety bit
2TLA020053R5000
Safety screwdriver bit SBITS.
Safety Screw Kit
SM4 x 20 mm
2TLA020053R6200
Special safety screw to eliminate risk of manipulation. Lenght adapted for
Adam & Eva. 4 pcs M4 × 20 mm + 1 pcs Safety screw Bit.
Safety Screw Kit
SM4 x 25mm
2TLA020053R6300
Special safety screw to eliminate risk of manipulation. Lenght adapted for
Adam & Eva, E-version. 4 pcs M4 × 25 mm + 1 pcs Safety screw Bit.
HK5
2TLA020003R4700
HK5 Cable 5 m and Cannon connection.
HK10
2TLA020003R4800
HK10 Cable 10 m and Cannon connection.
HK20
2TLA020003R4900
HK20 Cable 20 m and Cannon connection.
HK16S4
2TLA020003R5000
HK16S4 spiral cable 1.6 m and Cannon connection.
HK20S4
2TLA020003R5100
HK20S4 spiral cable 2.0 m and Cannon connection.
HK32S4
2TLA020003R5200
HK32S4 spiral cable 3.2 m and Cannon connection.
HK40S4
2TLA020003R3500
HK40S4 spiral cable 4.0 m and Cannon connection.
HK60S4
2TLA020003R3600
HK60S4 spiral cable 6.0 m and Cannon connection.
HK80S4
2TLA020003R5300
HK80S4 spiral cable 8.0 m and Cannon connection.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  32
Fencing System Quick-Guard
Aluminium profiles
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSM A4416
2TLA040037R7000
Aluminium profile, 44 × 16 mm, natural anodized cut to length max
6000 mm.
2TLA040037R7400
Aluminium profile, 44 × 16 mm, natural anodized L=6000 mm.
2TLA040037R8000
Aluminium profile, 44 × 26 mm, natural anodized cut to length, max
6000 mm.
2TLA040037R8100
Alluminium profile 44 × 26 mm, natural anodized L=6000 mm.
2TLA040037R3500
Aluminium profile, 44 x 44 mm, natural anodized cut to length.
2TLA040037R3600
Aluminium profile, 44 x 44 mm, natural anodized L=1100 mm.
2TLA040037R9800
Aluminium profile, 44 x 44 mm, natural anodized L=1400 mm.
2TLA040037R3700
Aluminium profile, 44 x 44 mm, natural anodized L=2000 mm.
2TLA040037R3800
Aluminium profile, 44 x 44 mm, natural anodized L=2200 mm.
2TLA040037R3900
Aluminium profile, 44 x 44 mm, natural anodized L=2400 mm.
2TLA040037R4000
Aluminium profile, 44 x 44 mm, natural anodized L=2500 mm.
2TLA040037R4100
Aluminium profile, 44 x 44 mm, natural anodized L=6000 mm.
2TLA040037R4200
Aluminium profile, 44 x 88 mm, natural anodized cut to length.
2TLA040037R4300
Aluminium profile, 44 x 88 mm, natural anodized L=2000 mm.
2TLA040037R4400
Aluminium profile, 44 x 88 mm, natural anodized L=2200 mm.
2TLA040037R4500
Aluminium profile, 44 x 88 mm, natural anodized L=6000 mm.
2TLA040037R7500
Aluminium profile, 88 × 88 mm, natural anodized cut to length, max
6000 mm.
2TLA040037R7900
Aluminium profile, 88 × 88 mm, natural anodized L=6000 mm.
JSM A12
2TLA040037R2800
U-profile for Quick-Guard E. Natural anodized aluminium. Cut to length, max
2000 mm.
JSM A12-1076
2TLA040037R2700
U-profile for Quick-Guard E with length 1100 mm c-c profiles. Natural
anodized aluminium. Length 1076 mm.
JSM A12-1476
2TLA040037R4600
U-profile for Quick-Guard E with length 1500 mm c-c profiles. Natural
anodized aluminium. Length 1476 mm.
JSM A12-2000
2TLA040037R4700
U-profile for Quick-Guard E. Natural anodized aluminium. Length 2000 mm.
JSM A13
2TLA040037R5000
H-profile for Quick-Guard E. Natural anodized aluminium. Cut to length, max
2020 mm.
JSM A13-1076
2TLA040037R5100
H-profile for Quick-Guard E. Natural anodized aluminium. Length 1076 mm.
JSM A13-1476
2TLA040037R5200
H-profile for Quick-Guard E. Natural anodized aluminium. Length 1476 mm.
JSM A13-2020
2TLA040037R5300
H-profile for Quick-Guard E. Natural anodized aluminium. Length 2020 mm.
JSM A3130C
Löpskena sjutdörr
2TLA040037R9900
Guiding rail. JSM D5 fit this rail. Natural anodized Aluminium, standard length
6100mm. Max length 6100mm
JSM A56
2TLA040037R4900
Guiding rails for slidingdoors. JSM D5 fit this rail. Natural anodized
aluminium, max length 6000 mm.
2TLA040037R0800
Guiding rails for slidingdoors. JSM D5 fit this rail. Natural anodized
aluminium, length 2000 mm.
2TLA040037R4800
Guiding rails for slidingdoors. JSM D5 fit this rail. Natural anodized
aluminium, length 6000 mm.
JSM A25A
2TLA040037R1300
Cable duct 44 × 25 mm with holes c-c =500 mm diameter=5. Natural
anodized aluminium. Lenght 2000 mm.
JSM A60A
2TLA040037R1500
Cable duct 44 × 60 mm with holes c-c =500 mm diameter=5. Natural
anodized aluminium. Lenght 2000 mm.
JSM A88
2TLA040037R3300
Cable duct 88 × 68 mm without holes. Natural anodized aluminium. Length
2000 mm.
JSM AS1
2TLA040037R9500
Mounting profile for 25 mm sound-absorbing panels. Natural anodized
aluminium, cut to length, max 2000 mm.
2TLA040037R0900
Mounting profile for 25 mm sound-absorbing panels. Natural anodized
aluminium, length 2000 mm.
JSM A4426
JSM A44A
JSM A4488A
JSM A8888
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  33
JSM AS2
2TLA040037R9600
Mounting profile for double polycarbonate sheets (2 × 5 mm). Natural
anodized aluminium, cut to length, max 2000 mm.
2TLA040037R1000
Mounting profile for double polycarbonate sheets (2 × 5 mm). Natural
anodized aluminium, length 2000 mm.
2TLA042021R8000
Profile for 50 mm sound-absorbing panel, cut to length.
2TLA042021R8100
Profile for 50 mm sound-absorbing panel,
L=6000 mm.
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSM 30B-K
2TLA040030R0600
Floor bracket in aluminium. Dimension 42 × 100 × 100 mm, pre-mounted.
JSM 39-K
2TLA040030R1400
Floor bracket in aluminium. Dimension 40 × 70 × 100 mm, pre-assembled.
Not recommended for fences with height over 2500 mm.
JSM 30B-K1
2TLA040030R1100
Big angled bracket in aluminium. Dimension 42 × 100 × 100 mm, preassembled with 4 screws.
JSM 31A1-K
2TLA040030R0400
Small angled bracket in aluminium. Dimension 40 × 40 × 40 mm. with two
counter sunk holes, pre-assembled with M8 screw in one hole.
JSM31B-K
2TLA040030R1300
Small angled bracket in aluminium. Dimension 40 × 40 × 40 mm. with two
counter sunk holes, pre-assembled with M8 screws in both holes.
JSM 32B-K
2TLA040030R0700
L- shaped mounting bracket in aluminium for mounting the profiles together,
pre-assembled.
JSM 42
L-shape
2TLA042020R3200
L-shaped in aluminium. Pre-assembled with K6S M8 (16pcs) and JSM 8M.
JSM 33B-K
2TLA040030R0800
T- shaped mounting bracket in aluminium for mounting the profiles together,
pre-assembled.
JSM 34B-K
2TLA040030R1500
I- shaped mounting bracket in aluminium for mounting the profiles together.
Dimension 41 × 85 × 6 mm, pre-assembled.
JSM 43
U‑shape
2TLA042020R3100
U-shaped special mounting bracket in aluminium for mounting profiles
together, pre-assembled.
JSM 35-K
2TLA040033R1400
Hinge C/C 47 mm in Zinc-plated steel, pre-assembled. Used as angled
bracket in Quick-Guard S.
JSM 37
2TLA040033R3100
Spacer screw for Quick-Guard E. Used to keep the distance between the
mesh and the floor.
JSM 40
Angle bracket
2TLA042021R5600
Angle bracket 45º. Pre-assembled with K6S M8 and JSM 8M
JSM AS3
Fixing
IMAGES
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  34
Fixing for switches
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSM D4E
2TLA040033R1800
Fitting for Sense7 in aluminium, conventional door. Need two pieces for one
door.
JSM D4G
2TLA040033R3300
Fitting for magnetic non-contact sensors like Sense7. In Aluminium, for
sliding door.
JSM D4H
2TLA040033R3600
Fitting for Adam & Eva (Eden) for conventional- and folding door/hatch. Need
two pieces for a complete Eden.
JSM D4K
2TLA040033R4500
Fitting for Eden/Eden E in Stainless steel for conventional- and folding door/
hatch. Need two pieces for one complete Eden.
JSM D4J
2TLA042020R4000
Fitting for Adam/Eva. folding door/hatch.
JSM D29A
2TLA040033R6000
Fitting in stainless steel for Mkey 5, conventional door.
JSM D29B
2TLA040033R6100
Fitting in stainless steel for Mkey 5, sliding door.
JSM D29C
2TLA040033R6200
Fitting in stainless steel for Mkey 8/9, conventional door.
JSM D29D
2TLA040033R6300
Fitting in stainless steel for Mkey 8/9, sliding door.
JSM D29E
2TLA040033R6400
Spacer in stainless steel for Mkey flexible key.
Door components
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSM D1A
2TLA040033R1500
Hinge C/C 62 mm in Zinc-plated steel, pre-assembled. Used for conventional
doors/hatches. Not as angled bracket because its gap can exceed 20 mm.
JSM D1B
2TLA042020R4700
Spring hing, pre-assembled.
JSM D1C
2TLA040033R4800
Hinge C/C 45mm in fiberglass-reinforced polymide, pre-assembled. Used for
conventional doors/hatches. Can also be used as angled bracket.
JSM D2
2TLA040033R0100
JSM D2 handle including screw.
JSM D18
2TLA042020R5000
Handle incl. bracket, for “inside” sliding doors.
JSM D5
2TLA040033R0400
Suspension wheel for sliding-/folding door. Suitable in JSM A3130B and
JSM A56.
JSM D6
2TLA040033R0500
Rectangular sliding element in Polyamide.
JSM D7
2TLA040033R0600
Round Sliding element in Polyamide.
JSM D8
2TLA040033R0700
Guide sliding element in Polyamide.
JSM D26
2TLA042020R3700
Guide sliding.
JSM D9
2TLA040033R0800
Support wheel with lock/brake, without angled bracket. Wheel diameter
75mm, height 97mm. Maximal load 60kg
JSM D9-K
2TLA040033R1100
Support wheel with lock/brake, including angled bracket. Wheel diameter
75 mm, height 97 mm. Maximal load 60kg.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  35
JSM D9A
2TLA040033R1200
Fixed support wheel, without angled bracket. Wheel diameter 75mm, height
95mm. Maximal load 70kg
JSM D9A-K
2TLA040033R1300
Fixed support wheel, inclding angled bracket. Wheel diameter 75 mm, height
95 mm. Maximal load 70kg.
JSM D12
2TLA040033R2200
Guide bracket for sliding door, vertical profile. Material aluminium and PA6-6.
JSM D12A
2TLA040033R2300
Guide bracket for sliding door, horizontal profile. Material aluminium and
PA6-6.
JSM D12B
2TLA040033R2400
Guide plate for sliding door. Material aluminium.
JSM D13
2TLA040033R2500
Door stop, with vibration damper in zinc-plated steel, for sliding door, vertical
profile.
JSM D13A
2TLA040033R2600
Door stop for conventional doors and hatches in Natural anodized
aluminium.
JSM D13B
2TLA040033R2700
Door stop, with vibration damper in Zinc-plated steel, for sliding door,
horizontal profile.
JSM D14
2TLA040033R2800
Cross bar for door 20 × 5 L=1160 mm. Natural anodized aluminium.
JSM D14A
2TLA042021R7300
Cross bar for door 20 x 5 L=400 mm.
JSM D3
2TLA040033R0200
Door closer incl. mounting components, for conventional door/hatch.
JSM D19
2TLA042020R5600
Door closer incl. mounting components, for sliding door.
JSM D11B
2TLA040033R4100
Ball latch for conventional door/hatch.
JSM D11C
2TLA040033R4200
Ball latch for sliding door.
JSM D11D
2TLA042020R5200
Ball latch for folding door (with guiding rail JSM A3130B).
JSM D22
2TLA042024R1000
Gas spring incl. fittings. Stroke 300 mm.
JSM D22A
2TLA042024R1100
Gas spring incl. fitting. Stroke 350 mm.
JSM D10
2TLA040033R2000
Pullock for doors down to floor. Brackets are in zinc-plated steel, rod are in
stainless steel. Total height 280 mm.
JSM D10A
2TLA040033R2100
Spring-loaded pullock for above the door. Brackets are in zinc‑plated steel,
rod are in stainless steel. Total height 1130 mm.
JSM D10B
2TLA040033R3800
Door bolt with spring for doors down to floor. Brackets are in zinc-plated
steel, rod are in stainless steel. Total height 995 mm.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  36
JSM D20
Skjutregel för Eden
2TLA020302R1000
Sliding unit for Eden for conventional doors. Made in steel, yellow. Eden is
not included.
JSM D15
2TLA040033R3900
Cam lock including. fitting. Bracket are in aluminium and lockunit in black
polymide. Keys are excluded.
JSM D16
2TLA040033R4400
Key to fit JSM D15 in black zinc.
JSM D17
2TLA042020R2200
Bracket for padlock hasp, zinc plated steel. Need two pieces for one
complete unit.
Express sections height 2000 and 2200
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSM E11-N20X4
2TLA040101R0200
Quick-Guard E section with one 44 x 44 mm profile and welded mesh
1074 x 1816 mm. Total height 2000 mm, width 1100 mm c-c profiles.
JSM E11-N20X8
2TLA040101R0300
Quick-Guard E section with one 44 x 88 mm profile and welded mesh
1074 x1816 mm. Total height 2000 mm, width 1100 mm c-c profiles.
JSM E15-N20X8
2TLA040101R0900
Quick-Guard E section with one 44 x 88 mm profile and welded mesh
1474 x 1816 mm. Total height 2000 mm, width 1500 mm c-c profiles.
JSM E11-PC20X8
2TLA040101R5300
Quick-Guard E section with one 44 x 88 mm profile and polycarbonate
1074 x 1816 mm. Total height 2000 mm, width 1100 mm c-c profiles.
JSM E11-N/PC20X8
2TLA040104R0100
Quick-Guard E section with one 44 x 88 mm profile, welded mesh and
polycarbonate. Total height 2000 mm, width 1100 mm c-c profiles.
JSM E11-N20Z
2TLA040101R0400
Quick-Guard E section without profiles. Including components welded mesh
1074 x 1816 mm, netlocks and edge protection. Total height 2000 mm, width
1100 mm c-c profiles.
JSM E15-N20Z
2TLA040101R1000
Quick-Guard E section without profiles. Including components welded mesh
1474 x 1816 mm, netlocks and edge protection. Total height 2000 mm, width
1500 mm c-c profiles.
JSM E11-PC20Z
2TLA040101R5400
Quick-Guard E section without profiles. Including components
Polycarbonate 1074 x 1816 mm, netlocks and edge protection. Total height
2000 mm, width 1100 mm c-c profiles.
JSM E11-N/PC20Z
2TLA040104R0200
Quick-Guard E section without profiles. Including components welded mesh,
polycarbonate, netlocks and edge protection. Total height 2000 mm, width
1100 mm c-c profiles.
JSM E11-N20G
2TLA040101R0500
Quick-Guard E door section with 44x44/44x88 mm profiles. Including
components profiles, floor brackets, netlocks, pre-mounted doorleaf with
welded mesh. Total height 2000 mm, width 1100 mm c-c profiles.
JSM E11-PC20G
2TLA040101R5500
Quick-Guard E door section with 44 x 44/44 x 88 mm profiles. Including
components profiles, polycarbonate, floor brackets and netlocks. Total
height 2000 mm, width 1100 mm c-c profiles.
JSM E11-N/PC20G
2TLA040104R0300
Quick-Guard E door section with 44 x 44/44 x 88mm profiles. Including
components profiles, welded mesh, polycarbonate, floor brackets and
netlocks. Total height 2000 mm, width 1100 mm c-c profiles.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  37
JSM E11-N20S
2TLA040101R0600
Quick-Guard E slidingdoor section with 44 x 44/44 x 88 mm profiles.
Including components profiles, welded mesh, suspension wheels, guiding
components, floor brackets and netlocks. Total height 2000 mm, door width
1100 mm c-c profiles.
JSM E15-N20S
2TLA040101R1100
Quick-Guard E slidingdoor section with 44 x 44/44 x 88 mm profiles.
Including components profiles,suspension wheels, guiding components,
floor brackets and netlocks. Total height 2000 mm, door width 1500 mm c-c
profiles.
JSM E11-PC20S
2TLA040101R5700
Quick-Guard E slidingdoor section with 44 x 44/44 x 88 mm profiles.
Including components profiles, polycarbonate, suspension wheels, guiding
components, floor brackets and netlocks. Total height 2000 mm, door width
1100 mm c-c profiles.
JSM E11-N/PC20S
2TLA040104R0400
Quick-Guard E slidingdoor section with 44 x 44/44 x 88 mm profiles.
Including components profiles, welded mesh, polycarbonate, suspension
wheels, guiding components, floor brackets and netlocks . Total height
2000 mm, door width 1100 mm c-c profiles.
JSM E11-20Y4
2TLA040103R2000
44 × 44 mm profile length 2000 mm, two floor brackets and one support
screw.
JSM E11-20Y8
2TLA040103R2100
44 × 88 mm profile length 2000 mm, two floor brackets and one support
screw.
JSM E11-22Y4
2TLA040103R4000
44 × 44 mm profile length 2200 mm, two floor brackets and one support
screw.
JSM E11-22Y8
2TLA040103R4100
44 × 88 mm profile length 2200 mm, two floor brackets and one support
screw.
Express sections height 1400
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSM E11-N14X4
2TLA040106R0200
Quick-Guard E section with one 44 x 44 mm profile and welded mesh
1074 x 1216 mm. Total height 1400 mm, width 1100 mm c-c profiles.
JSM E11-N14X8
2TLA040106R0300
Quick-Guard E section with one 44 x 88 mm profile and welded mesh
1074 x 1216 mm. Total height 1400 mm, width 1100 mm c-c profiles.
JSM E15-N14X4
2TLA040106R1000
Quick-Guard E section with one 44 x 44 mm profile and welded mesh
1474 x1216mm. Total height 1400 mm, width 1500 mm c-c profiles.
JSM E15-N14X8
2TLA040106R0700
Quick-Guard E section with one 44 x 88 mm profile and welded mesh
1474 x 1216 mm. Total height 1400 mm, width 1500 mm c-c profiles.
JSM E11-PC14X4
2TLA040106R5200
Quick-Guard E section with one 44 x 44 mm profile and polycarbonate
1074 x 1216 mm. Total height 1400 mm, width 1100 mm c-c profiles.
JSM E11-PC14X8
2TLA040106R5300
Quick-Guard E section with one 44 x 88 mm profile and polycarbonate
1074 x 1216 mm. Total height 1400 mm, width 1100 mm c-c profiles.
JSM E11-N14Z
2TLA040106R0400
Quick-Guard E section without profiles. Including components welded mesh
1074 x 1216 mm, netlocks and edge protection. Total height 1400 mm, width
1100 mm c-c profiles.
JSM E15-N14Z
2TLA040106R0800
Quick-Guard E section without profiles. Including components welded mesh
1474 x 1216 mm, netlocks and edge protection. Total height 1400 mm, width
1500 mm c-c profiles.
JSM E11-PC14Z
2TLA040106R5400
Quick-Guard E section without profiles. Including components,
polycarbonate 1074 x 1216 mm, netlocks and edge protection. Total height
1400 mm, width 1100 mm c-c profiles.
JSM E11-N14G
2TLA040106R0500
Quick-Guard E door section with 44 x 44/44 x 88 mm profiles. Including
components profiles, floor brackets, netlocks, pre-mounted doorleaf with
welded mesh. Total height 1400 mm, width 1100 mm c-c profiles.
JSM E11-PC14G
2TLA040106R5500
Quick-Guard E door section with 44 x 44/44 x 88 mm profiles. Including
components profiles, polycarbonate, floor brackets and netlocks. Total
height 1400 mm, width 1100 mm c-c profiles.
JSM E11-14Y4
2TLA040106R8000
44 x 44 mm profile Length 1400 mm, two floor brackets and one support
screw.
JSM E11-14Y8
2TLA040106R8100
44 x 88 mm profile Length 1400 mm, two floor brackets and one support
screw.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  38
Cover and list
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSM L4A
2TLA040034R0400
Terminal cap in yellow for profiles 44 × 88 mm. Made in Polymide.
JSM L4B
2TLA040034R0500
Terminal cap in grey for profiles 44 × 88 mm. Made in Polymide.
JSM L2
2TLA040034R0100
Terminal cap in grey for JSM A25 25 × 44 mm. Made in Polymide.
JSM L3
2TLA040034R0200
Terminal cap in grey for JSM A60 60 × 44 mm. Made in Polymide.
JSM T3A
2TLA040037R3100
Cover strip in yellow ABS, length 2000 mm, wide 16 mm.
JSM T3B
2TLA040037R3200
Cover strip in grey ABS, length 2000 mm, wide 16 mm.
JSM T2A
2TLA040037R1900
Cover strip in yellow PVC, soft material. 40 mm wide, 25 m/coil.
Surfaces and fixations
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSM NL2
2TLA040031R0600
Net lock in plastic for welded mesh with outer wire. Used in Quick-Guard E.
JSM NL3
2TLA040031R0800
Net lock in zinc for welded mesh with or without outer wire. Used in QuickGuard S with mesh.
JSM PL3
2TLA040038R1100
Panel lock in zinc for polycarbonate and steelpanels.
JSM PL1A
2TLA040038R0100
Infill securing strip in black ABS plastic. L=842 mm for 5 mm panels. Used
to fence with 5 mm polycarbonate also to 1 mm steelpanels and 3 mm weld
protected polycarbonate sheets (together JSM G2).
JSM PL1B
2TLA040038R0200
Infill securing strip in black ABS plastic. L=1152 mm for 5 mm panels. Used
to fence with 5 mm polycarbonate also to 1 mm steelpanels and 3 mm weld
protected polycarbonate sheets (together JSM G2).
JSM PL1C
2TLA040038R0300
Infill securing strip in black ABS plastic. L=2000 mm for 5 mm panels. Used
to fence with 5 mm polycarbonate also to 1 mm steelpanels and 3 mm weld
protected polycarbonate sheets (together JSM G2).
JSM PL1D
2TLA040038R0400
Infill securing strip in black ABS plastic. L=732 mm for 5 mm panels. Used
to fence with 5 mm polycarbonate also to 1 mm steelpanels and 3 mm weld
protected polycarbonate sheets (together JSM G2).
JSM PL2A
2TLA040038R0700
Infill securing strip in black ABS plastic. L=842 mm for 4 mm panels.
JSM PL2B
2TLA040038R0800
Infill securing strip in black ABS plastic. L=1152 mm for 4 mm panels.
JSM PL2C
2TLA040038R0900
Infill securing strip in black ABS plastic. L=2000 mm for 4 mm panels.
JSM PL2D
2TLA040038R1000
Infill securing strip in black ABS plastic. L=2000 mm for 4 mm panels.
JSM G2
2TLA040038R0600
Cellular rubber 20 × 25 mm self-adhesive.
JSM G3
2TLA041930R0600
Fixinglist for Laminated glass. Material is EPDM.
3
1
2
1
2
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  39
JSM YN40W1
2TLA040040R1300
Welded steelmesh 40 × 40 × 3.5 mm powder coated in black, dimension
2020 × 865 mm.
JSM YN40W2
2TLA040040R1400
Welded steelmesh 40 × 40 × 3.5 mm powder coated in black dimension
1074 × 1816 mm (uses in Quick-Guard E with 1100 mm c-c and height
2000 mm).
JSM YN40W3
2TLA040040R1500
Welded steelmesh 40 × 40 × 3.5 mm powder coated in black dimension
1074 × 2016 mm (uses in Quick-Guard E with 1100 mm c-c and height
2200 mm).
JSM YN40W4
2TLA040040R2000
Welded steelmesh 40 × 40 × 3.5 mm powder coated in black dimension
1474 × 2016 mm (uses in Quick-Guard E with 1500 mm c-c profiles and
height 2200 mm).
JSM YN40W5
2TLA040040R2100
Welded steelmesh 40 × 40 × 3.5 mm powder coated in black dimension
1474 × 1816 mm (uses in Quick-Guard E with 1500 mm c-c profiles and
height 2000 mm).
JSM YN40W6
2TLA040040R2600
Welded steelmesh 40 × 40 × 3.5 mm powder coated in black, dimension
2020 × 754 mm.
JSM YN40W7
2TLA040040R2700
Welded steelmesh 40 × 40 × 3.5 mm powder coated in black, dimension
2020 × 1174 mm.
JSM YN40W9
2TLA040040R1600
Welded steelmesh 40 × 40 × 3.5 mm powder coated in black, cut to size,
max dimension 2020 × 1474 mm.
JSM YN40W10
2TLA040040R2800
Welded steelmesh 40 × 40 × 3.5 mm powder coated in black, dimension
1474 × 1216 mm.
JSM YN40W11
2TLA040040R2900
Welded steelmesh 40 × 40 × 3.5 mm powder coated in black, dimension
1074 × 1216 mm.
JSM YN40W12
2TLA040040R2900
Svart svetsat stålnät. Nätmaska 40 x 40 x 3,5 mm, dimension
2020 x 1152 mm.
JSM YPC5A1
2TLA040039R1000
5 mm clear polycarbonate dimension 2020 × 864 mm.
JSM YPC5A2
2TLA040039R1100
5 mm clear polycarbonate dimension 2020 × 1174 mm.
JSM YPC5A3
2TLA040039R1700
5 mm clear polycarbonate dimension 1074 × 1816 mm.
JSM YPC5A4
2TLA040039R1800
5 mm clear polycarbonate dimension 1074 × 2016 mm.
JSM YPC5A5
2TLA040039R1900
5 mm clear polycarbonate dimension 960 × 1698 mm.
JSM YPC5A9
2TLA040039R1200
5 mm clear polycarbonate max dimension 2050 × 3050 mm.
JSM YPC3AC1
2TLA040039R2500
3 mm dark tinted polycarbonate weld-protected panel, 2050 × 3000.
JSM YPC3AC9
2TLA040039R2400
3 mm dark tinted polycarbonate weld-protected panel, cut to size.
JSM YGP1A9
2TLA040039R0700
1.0 mm cross-bent galvanized panel.
JSM YLA25A1
2TLA040039R2600
Sound-absorbing panel 25 mm smooth (white polyester)/perforated
(galvanized), core material is mineral wool, sound reduction 29dB Rw.
dimension 1963 × 1200 mm.
JSM YLA25A9
2TLA040037R1100
Sound-absorbing panel 25 mm smooth (white polyester)/perforated
(galvanized). Core material is mineral wool, cut to size. Sound reduction
29dB Rw.
JSM YLA50A9
2TLA042150R2300
Sound-absorbing panel 50 mm smooth (white polyester)/perforated
(galvanized). core material is mineral wool, cut to size. Sound reduction 33dB
Rw.
JSM YN30W1
2TLA042150R1800
Welded steelmesh 30 × 30 × 3 mm powder coated in black, dimension
2020 × 1123 mm.
Accessories - Fencing system Quick-Guard
IMAGES
DESIGNATION
ARTICLE NUMBER
DESCRIPTION
JSM M4B
2TLA040035R0700
Special nut, M4 galvanized.
JSM M5B
2TLA040035R0400
Special nut, M5 galvanized.
JSM M6B
2TLA040035R0500
Special nut, M6 galvanized.
JSM M8B
2TLA040035R0600
Special nut, M8 galvanized.
JSM M10A
2TLA041069R0000
Endnut M10 for JSM A44
JSM B4C
2TLA040035R5000
Centring washer M4 galvanized steel.
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  40
JSM B5C
2TLA040035R5100
Centring washer M4 galvanized steel.
JSM B6C
2TLA040035R5200
Centring washer M6 galvanized steel.
JSM B8C
2TLA040035R5300
Centring washer M8 galvanized steel.
JSM S8E
2TLA041019R0100
Screw for guiding rail JSM A56 M8 × 12, zinc plated steel.
JSM S5B
2TLA041039R0100
Screw for cable ducting M5 × 12, Zinc plated steel.
JSM S6A
2TLA041039R0200
Screw for hinge cross-slotted Z (pozidrive) M6 × 12, zinc plated steel.
JSM S8A
2TLA041019R0000
Screw for brackets and accessories. M8x16 GEOMET.
JSM X1
2TLA040033R4300
Cable tie holder including screw and nut, nylon black.
JSM X2
2TLA041900R4300
Expansion-shell bolt M10 × 68, zinc plated steel.
JSM X4
2TLA041911R0100
Mesh clipping tool L=300 mm.
JSM X5B
2TLA041810R0300
ABB Safety Products sign. Förmonterade med skruv. Dimensions
220x40x1,5mm. Pre-assembled
Product list, Machine safety - Jokab Safety products | 2TLC172005B0201 rev.C |  41
ABB AB
Jokab Safety
Tel. +46 21-32 50 00
www.abb.com/jokabsafety
Note: We reserve the right to make technical changes or
modify the contents of this document without prior notice.
With regard to purchase orders, the agreed particulars shall
prevail. ABB AB, Jokab Safety does not accept any responsibility
whatsoever for potential errors or possible lack of information in this
document.
We reserve all rights in this document and in the subject matter
and illustrations contained therein. Any reproduction, disclosure to
third parties or utilization of its contents – in whole or in parts – is
forbidden without prior written consent of ABB AB, Jokab Safety.
Copyright © 2016 ABB
All rights reserved
© Copyright ABB 2TLC172005B0201 rev.C
Contact us
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising