Quick-start guide
Quick start guide: Olympus DM670 digital voice recorder
Quick-start guide
Power supply
When the recorder is not being used, turn the power off to reduce the battery
consumption to a minimum. Even if the power is turned off, existing data, mode
settings, and clock settings will be maintained.
Turning on the power
While the recorder is turned off, slide the Power/Hold switch down and hold for a
second or so. The display will turn on and the power will be turned on.
Turning off the power
Slide the Power/Hold switch down and hold for a second or so. The display shuts off,
and the power will be turned off.
Power save mode
If the recorder is on and is not used for 10 minutes or longer (default), the display shuts
off and it goes into power save mode. To exit power save mode press any button.
Recording
1. Select the recording folder
Before starting a recording, select a folder from A-E from within the Recorder menu.
2. Press the REC button to record
The record symbol will appear on the display
3. Press the STOP button to stop recording
The stop symbol will appear on the display along with the file length. A double beep will
sound.
Playback
1. Select the file to be played back from within the relevant folder A-E.
2. Press the OK/Play button to start playback.
3. Press the Up or Down button to adjust the volume to a comfortable listening level.
Page 1 of 3
Quick start guide: Olympus DM670 digital voice recorder
4. Press the Stop button at any point you want to stop the playback, this will stop the
file being played.
Setting an index mark or a temp mark
Index marks and temp marks enable you to quickly find a location you want to listen to
again; a bit like highlighting a point, or putting a book mark in a book. They are useful
for marking when the slide was changed.
1. While the recorder is in recording mode or playback mode, press the F2 (INDEX)
button.
A number appears on the display and an index mark or temp mark will be placed.
When listening back to the recording, use the fast forward or rewind buttons to move
through the index marks.
Erasing files
A selected file can be erased from a folder. Also, all files in a folder can be erased
simultaneously.
1. Select the file you want to erase.
2. While the recorder is in stop mode in the file display, press the Erase button.
3. Press the Up or Down button to select [Erase in folder] or [File erase].
4. Press the OK/Play button.
5. Press the Up button to select [Start].
6. Press the OK/Play button.
The display changes to [Erase!] and erasing will start. [Erase Done] is displayed when
the file is erased.
Page 2 of 3
Quick start guide: Olympus DM670 digital voice recorder
Charging by connecting to a computer via USB
You can charge the batteries by connecting to a USB port on a PC. When charging, be
sure to correctly place the rechargeable batteries (supplied) into the recorder.
1. Start up the PC.
2. Connect the USB cable to the USB port on the PC.
3. While the recorder is in stop mode or turned off, connect the USB cable to the
connecting terminal on the bottom of the recorder.
4. Press the OK/Play button to start charging while [Press OK/Play to start charging]
flashes on the display.
5. Charging is completed when the battery indication symbol shows an F.
Charging time: approximately three hours*
* The charging time will be changed depending on the remaining amount and the
condition of the batteries.
Page 3 of 3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising