Technical Information

Technical Information
STIH)
Technical Information
28.2010
Accessories for STIHL cut-off machines / drills
Contents
1. New pressurized water tank
2. Summary
1.
New pressurized water tank
The previous pressurized water tank
4223 670 6001 is replaced by the new version
0000 670 6000.
Spare parts
The previous pressurized water tank
4223 670 6001 is no longer available.
All individual parts for the previous pressurized
water tank 4223 670 6001 remain available.
TI_28_2010_30_01_01.fm
englisch / English
Page 2
1.1
Technical Information 28.2010
1.3
Assembling the pressurized water tank
Unlocking the pump handle
1
3
1
2
3701TI079 KN
3701TI077 KN
4
.
Turn the pump handle (1) approx. 1/4 turn to the
left or right – until it is in the middle position
.
Observe safety instructions when dealing with
the pressurized water tank, see Instruction
Manual
.
Insert hose (1) with screen (2) in the discharge
opening (3) on the bottom of the pressurized
water tank
1.4
Attach union nut (4) to the discharge opening
and tighten by hand
Carry out a visual inspection
.
1.2
Inspecting the pressurized water tank
Locking the pump handle
2
1
3
.
370TI080 KN
3701TI078 KN
1
Press down the unlocked pump handle (1) and
turn approx. 1/4 turn to the left or right – until it
snaps into place
.
Check that the pressurized water tank (1),
pump (2) and hose (3) are in good working
order prior to use
TI_28_2010_30_01_01.fm
Technical Information 28.2010
Page 3
Inspect the safety valve
4
.
3701TI084 KN
3701TI081 KN
2
3
.
Unscrew the pump (2) from the pressurized
water tank (3) by continuing to turn it
counterclockwise
.
Fill the tank with water – do not exceed the
maximum capacity (see b 1.7)
Pressurize the tank – move the unlocked pump
handle (4) of the empty pressurized water
tank (1) up and down approx. 10 times
1.5
.
Pull the red knob of the safety valve (5) –
pressure must escape audibly
Filling the pressurized water tank
Pull up the red knob of the safety valve until the
pressurized water tank is depressurized
2
1
3
3701TI083 KN
.
.
If necessary. push the pump handle (1) down
and turn it counterclockwise – until the pump
handle (1) snaps into position and is locked
TI_28_2010_30_01_01.fm
3701TI086 KN
.
3701TI085 KN
3701TI082 KN
5
Screw the pump (2) into the pressurized water
tank (3)
Page 4
Technical Information 28.2010
After use
3701TI087 KN
1
.
Pressurize the tank – move the unlocked pump
handle (1) up and down several times – stop
before the maximum operating pressure is
reached (see b 1.7)
If the maximum operating pressure is exceeded, the
safety valve releases the excess pressure.
.
1.6
Press the pump handle down and lock it
(see b 1.2)
Using the pressurized water tank
Disconnect the quick-action coupling from the
cut-off machine or drill used
.
Pull up the red knob of the safety valve until the
pressurized water tank is depressurized
.
Empty the pressurized water tank
.
For drying and storage, keep the pressurized
water tank in a dry, frost-free environment where
it is shielded from the sun's rays
.
If necessary, unscrew the hose and clean the
screen under running water
1.7
Specifications
Max. capacity:
Total contents:
Max. operating pressure
Empty weight:
Tank material:
10 l (2.6 gal.)
12.5 l (3.3 gal.)
3 bar (43.5 PSI)
2.7 kg (6 lb)
Polyethylene
2
370TI088 KN
1
.
.
Connect the quick-action coupling (1) on the
hose of the pressurized water tank with the
water connection (2) on the cut-off machine or
drill used
.
Open the shut-off cock on the cut-off machine or
drill used – the water begins to flow
.
If the pressure in the pressurized water tank falls
to < 0.5 bar (7 PSI), the tank must be pumped
up again
.
If the pressurized water tank is empty, it must be
refilled
TI_28_2010_30_01_01.fm
Technical Information 28.2010
2.
Page 5
Summary
2
17
19
4
11
6
7
8
9
10
20
5
12
24
15
14
13
23
18
16
23
1
21
23
Left:
Right:
Item
1
2
3
4
5
6
7
8
9
10
11
12
370TI089 KN
21
22
previous pressurized water tank 4223 670 6001
new pressurized water tank 0000 670 6000
Part Name
Previous
New
Rem.
Pressurized water tank (complete):
including Items 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, 13, 17,
19, 21, 23
Pressurized water tank (complete):
including Items 5, 12, 14, 15, 16, 18, 20, 21, 22, 23,
24
Water tank;
including Items 2, 3
Sleeve (set of 2)
Insert
Handle;
including Item 6
Handle
O-ring A 14x1.78-NBR70
Filler cap;
including Item 8
O-ring A 56.52x5.33-NBR70
Piston;
including Item 10
O-ring A 37.5x3.15-NBR70
Pump barrel;
including Item 13
Pump barrel;
including Items 14, 15, 16
4223 670 6001
---
1)
---
0000 670 6000
4223 670 6010
-*-
2)
4223 677 8300
4223 678 1600
4223 670 7700
-------
2)
2)
2)
--9645 945 7560
4223 670 8600
0000 670 7700
-----
2)
2)
9645 945 8240
4223 670 8200
-----
2)
2)
9645 945 7958
4223 670 6600
-----
2)
2)
---
0000 670 6600
TI_28_2010_30_01_01.fm
Page 6
Technical Information 28.2010
Item
Part Name
Previous
New
Rem.
13
14
15
16
17
Valve
Valve
O-ring N 46.99x5.33-NBR70
Funnel
Valve;
including Item 19
Valve;
including Item 20
O-ring A 8.76x1.78-NBR70
O-ring N 17x2.5-NBR70
Hose 4 m (13 ft)
Hose;
including Items 21, 22, 23
Screen
Coupling sleeve 1/2"
Warning pictogram
Set of gaskets;
including Items 14, 15, 20
4223 678 2600
------4223 670 5000
---*-*0000 676 0500
---
2)
---
0000 670 5000
9645 945 7494
--4309 678 1100
---
---*4309 678 1100
0000 670 0300
--4201 670 1700
-----
0000 670 0400
4201 670 1700
0000 967 7304
0000 007 1600
18
19
20
21
22
23
24
2)
2)
Modification to be introduced : continuously
Remarks
1) Previous version is no longer available from factory
2) Previous version of part remains available for older versions
© ANDREAS STIHL AG & Co. KG, 2010
Technical Documentation
D1/MTK-fr
TI_28_2010_30_01_01.fm
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising