power w6
POWER
W6
POWER
W6
COMPETITION
KEY FEATURES
•
•
•
High power handling (100 W RMS)
High mechanical resistance kevlar cone
Designed for low-medium frequencies reproduction
TECHNICAL SPECIFICATIONS
Nominal diameter
Nominal impedance
Power handling / maximum
Sensitivity
Frequency range
Voice coil diameter
Bl factor
Moving mass
165 mm. 6.5 in.
4 ohms
100 W RMS / 200 W
89 dB 1w @ 1m
45 - 4000 Hz
38.5 mm. 1.5 in.
6.7 N / A
0.016 Kg.
DIMENSION DRAWINGS
THIELE-SMALL PARAMETERS
Resonant frequency, fs
D.C. voice coil resistance, Re
Mechanical quality factor, Qms
Electrical quality factor, Qes
Total quality factor, Qts
Equivalent air volume to Cms, Vas
Efficiency, ho (%)
Effective surface area, Sd
Xmax
Voice coil inductance, Le @ 1kHz
62 Hz
3.7 ohms.
5.69
0.54
0.49
9l
0.42
130 cm2
4 mm
0.4 mH
CAJA CERRADA
FREQUENCY RESPONSE
FREE AIR IMPEDANCE CURVE
Note: on axis frequency response measured with loudspeaker
standing on infinite baffle in anechoic chamber, 1w @ 1m.
056
Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
·Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail:beyma@beyma.com·
PH-25
PH-25
SOUND CONCEPT
KEY FEATURES
•
•
•
•
•
•
High sensitivity (95 dB)
Extended frequency range (2 - 22 KHz)
Titanium diaphragm
Neodymium magnet
Aluminium front cover
Designed for the high frequencies reproduction
TECHNICAL
TECHNICAL SPECIFICATIONS
SPECIFICATIONS
Nominal impedance
Power handling / maximum
Sensitivity
Frequency range
Recommended crossover frequency
Resonant frequency, fs
Voice coil diameter
Diaphragm material
4 ohms
15 W RMS / 30 W
95 dB 1w @ 1m
2 - 22 kHz
3 kHz, 12 dB/oct.
1.8 kHz
25.8 mm. 1.02 in.
Titanium
DIMENSION DRAWINGS
MOUNTING INFORMATION
Overall diameter
Depth
Baffle cutout dimensions
56 mm. 2.21 in.
33 mm. 1.30 in.
49 mm. 1.93 in.
CAJA CERRADA
FREQUENCY RESPONSE
IMPEDANCE CURVE
Note: on axis frequency response measured on anechoic chamber,
applying 1w@1m.
056
Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
·Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail:beyma@beyma.com·
CKX-2
CKX-2
COMPETITION
KEY FEATURES
2 way passive filter
18 dB/octave attenuation slope
Excellent power handling (150 w RMS)
Optional tweeter attenuation (0, -2, -4, -6, -8 dB)
Carefully designed to work with Competition drivers
TECHNICAL SPECIFICATIONS
Type
Crossover frequency
Power capacity
Low / High frequency impedance
Attenuation slope
H.F. attenuation
FREQUENCY RESPONSE
DIMENSION DRAWINGS
2 way
3 kHz
150 w RMS
4 ohms.
18 dB/oct.
0, -2, -4, -6, -8 dB
Polígono Industrial Moncada II · C/. Pont Sec, 1c · 46113 MONCADA - Valencia (Spain)
·Tel. ( 34 ) 96 130 13 75 · Fax ( 34 ) 96 130 15 07 · http://www.beyma.com · E-mail:beyma@beyma.com·
037
•
•
•
•
•
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising