EBA 5560 - Professional guillotine with hydraulic blade and clamp

EBA 5560 - Professional guillotine with hydraulic blade and clamp
EBA 5560 / 5560 LT
Professional guillotine with hydraulic blade and clamp drive,
EASY-CUT, programmable power backgauge with touch pad
and IR light beam safety curtain on the front table.
55 cm
Cutting length
550 mm
Cutting height
95 / 92* mm
Narrow cut
32 / 60* mm
Table depth
570 mm
* with false clamp installed
Technical specifications
230 V / 50 Hz / 1~
1.5 kW 0.1 kW backgauge drive
Dimensions 1370 x 1070 x 1400 mm (H x W x D)
width with side tables 1630 mm
369 kg without side tables
386 kg with side tables
Product characteristics
Hydraulic blade and clamp drive. Equipped with the new, patented EASY-CUT blade activating
bars for convenient and safe cutting. Comprehensive SCS safety package: IR light beam safety
curtain on the front table; safety cover on the rear table; lockable main switch; electronically
controlled true two-hand operation; 24 volt controls (low voltage); s­ afety drive; automatic blade
and clamp return from every position; blade changing device with covered cutting edge; blade
depth adjustment from the outside of the m
­ achine; easy blade and cutting stick change from
the front of the machine without removing covers. Foot pedal for pre-clamping or as mechanical cutting line indicator. Optical cutting line with bright and durable LEDs. Electric backgauge
drive with touch pad for easy setting, multilingual operator guidance and digital display.
Measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch). 99 programs
with 99 steps in each program (up to 15 repeat cuts can be integrated into a program as one
single program step). Program runs automatically. 10-button key pad for presetting of
measurement. Pre-programmed measurements for A3 to A6 standard paper sizes. Memory key
for repeat cuts. Automatic SET function for ­reference measurement via start button.
Programmable EJECT function - for pushing out the paper. Self-diagnostic system with
error indication on display. Electronic hand wheel for manual backgauge positioning with
­infinitely variable speed c­ ontrol (from very slow to very fast). Adjusting knob for infinitely
variable clamp pressure (min. 200 / max. 1100 daN) and pressure gauge. False clamp plate for
delicate work. Solid front table made of die-cast aluminium with stainless steel worktops.
Blade made of high quality HSS steel. Hydraulic swing cut for high cutting precision. Die-cast
aluminium blade carrier and adjustable blade guides. Aluminium clamp bar. Adjustable blade
depth. Sturdy cast iron machine frame. Movable on castors. Complete with practical tool holder
and stacking angle. Optional set of side tables (left and right) available at an extra cost.
EBA 5560 LT with air table (air jets on front and rear table).
EBA 5560 / 5560 LT
Patented EASY-CUT activating bars
The light beam safety curtain in the working
area of this professional guillotines ensures
the highest level of safety and cutting convenience.
Ideal for manual backgauge positioning, the
electronic hand wheel has infinitely variable
speed control from very slow to very fast.
A cut can be executed conveniently by means
of the patented EASY-CUT blade activating
bars, which guarantee a safe two-hand
EASY-TO-USE Touch pad
Practical tool holder
Extremely convenient: Electronic, programmable
control module for the power backgauge with
multi-lingual touch pad. 99 programs with
99 steps in each program can be stored.
The practical hook-in tool holder is placed on
the back table and keeps all necessary tools
for blade change and service jobs within reach.
Safe and convenient blade change without
removing covers. Blade changing device covers
cutting edge of blade to protect the operator.
Technical data approximate. Subject to change. 01/2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF