ROBIN® MMX Spot

ROBIN® MMX Spot
06-01-2014
ROBIN® MMX Spot
The Robe MMX is a new technology discharge fixture that has similar
light output to most existing 1200W luminaires. The unit is based on the
all new Robin advanced technology design that provides Brighter, more
efficient, physically lighter and smaller fixtures than previously possible.
The MMX includes the Robe exclusive Hot-Spot lamp control feature that
allows remote adjustment of flat beam uniformity or power beam hotspot.
Key feature of the MMX is the 'Dual Graphics Wheel' - 2 fully controllable
contra-rotating plates that can be positioned anywhere across the light
path to produce unique visual effects.
Source
Lamp: Compact high-presure metal halide lamp
Base: PGJX36
Approved model: Philips MSR Platinum 35, 1200 W equivalent
Control: Automatic and remote on/off
Ballast: Electronic
Optical System
Fixture total lumen output: 26141 lm
Dichroic glass reflector for maximising the light efficiency
Beam angle: Zoom range: 8.5° – 46.5° (8.5° – 42.5° for gobo, 9.8° – 46.5° for open hole)
Electrical Specification
Power supply: Electronic auto-ranging
Input voltage range: 100–240 V, 50/60 Hz
Power consumption: 1020 W at 230 V / 50 Hz
Mechanical Specification
Height: 722 mm (28.4") – head in vertical position
Width: 446 mm (17.6")
Depth: 530 mm (20.8")
Weight: 25.5 kg (56.2 lbs)
Fixation option: Pan/Tilt-lock mechanism
Thermal
Maximum ambient temperature: 45 °C (104 °F)
Head office: ROBE lighting s .r.o. | Hážovice 2090 | 756 61 Rožnov pod Radhoštěm | Czech Republic
Tel.: +420 571 751 500 | Fax: +420 571 751 515 | E-mail: robe@robe.cz
06-01-2014
Maximum ambient temperature: 45 °C (104 °F)
Maximum surface temperature: 100 °C (212 °F)
Rotating Gobos
Glass gobos - outside diameter: 26.8 mm, image diameter: 22.0 mm, thickness: 1.1 mm, max.
thickness: 4.0 mm, high temperature borofloat or better glass
Control and Programming
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2
Optional wireless version available: CRMX™ technology from Lumen Radio
Control channels: 38, 31, 29
3 DMX protocol modes
3-editable programs, each up to 100 steps
Stand-alone operation
QVGA Robe touch screen with battery backup gravitation sensor for auto screen positioning
operation memory service log with RTC
Pan/Tilt resolution: 8 or 16 bit
Movement control: Tracking and vector
Colour wheel positioning: 8 or 16bit
Rotating gobo wheel positioning: 8 or 16bit
Gobo indexing & rotation: 8 or 16bit
Dual Graphic Wheel: 8 bit
Iris: 8 or 16bit
Frost: 8 bit
Zoom: 8 or 16bit
Focus: 8 or 16bit
Dimmer: 8 or 16bit
Ethernet port: Art-Net protocol, ready for ACN
Data in/out: Locking 3-pin & 5-pin XLR
Built-in analyser for easy fault finding
Electromechanical Effects
Cyan: 0–100%
Magenta: 0–100%
Yellow: 0–100%
CTO: 0–100%
Hot-spot control: Hot-or-not-spot
Colour wheel: 6 dichroic filters + white
Dual Graphic Wheel
Rotating Gobo wheel 1: 7 rotating, indexable, replaceable "SLOT&LOCK" glass gobos + open
Rotating Gobo wheel 2: 7 rotating, indexable, replaceable "SLOT&LOCK" glass gobos + open
Iris: Motorized, stepless, pulse effects up to 3 Hz
Prism: 5-facet prism rotating in both directions at different speeds
Frost effect: Separate, variable
Dimmer/Shutter: Full range dimming and variable strobe effect, Electronic strobbing "ZAP" effect
Motorized zoom and focus
Pan: 540°
Tilt: 270°
Rigging
Mounting points: 2 pairs of ¼-turn locks
2 x Omega brackets with ¼-turn quick locks
Head office: ROBE lighting s .r.o. | Hážovice 2090 | 756 61 Rožnov pod Radhoštěm | Czech Republic
Tel.: +420 571 751 500 | Fax: +420 571 751 515 | E-mail: robe@robe.cz
06-01-2014
Head office: ROBE lighting s .r.o. | Hážovice 2090 | 756 61 Rožnov pod Radhoštěm | Czech Republic
Tel.: +420 571 751 500 | Fax: +420 571 751 515 | E-mail: robe@robe.cz
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising