Model #: SU2200RTXL2U
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SU2200RTXL2U
Smart Online Expandable Rack/Tower UPS System - On-line, double-conversion protection for mission-critical
applications
Highlights
2200VA on-line 2U expandable rack / tower UPS
Enhanced serial communications port and SNMP/Web card slot
Maintains 120V +/-2% output during overvoltages to 138 and brownouts as low as 65V
2 load banks, 7 outlets (5-15/20, L5-20)
Fault tolerant auto-bypass
$250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only)
Description
Tripp Lite's Smart Online SU2200RTXL2U on-line, double conversion UPS protects critical server, networking and telecommunications equipment
from blackouts, voltage fluctuations and transient surges. Multi-use form factor occupies only 2 rack spaces (2U) in standard 19 inch rackmount
configuration and includes tower stands to support upright placement. Large capacity 2.2kVA/1600 watt UPS continuously converts incoming AC
power to DC power, then back to perfect sine wave AC output at 120V AC (+/-2%). Removes harmonic distortion, fast electrical impulses, frequency
fluctuations and other hard-to-solve power problems not addressed by other UPS types. True sine wave output and zero transfer time offers
guaranteed compatibility with all equipment types. Includes 7 outlets arranged in two individually switchable load banks. These outlet banks can be
independently controlled via software interface to selectively reboot remote equipment, or shed less critical loads to extend battery runtime for more
critical equipment. Battery support can be extended indefinitely through the addition of external 2U rackmount battery packs (part# BP48V21-2U).
Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port for unattended shutdown, remote control and monitoring of UPS
system and power data. Compatible with Tripp Lite's Watchdog system service software.
Applications
Ideal for protection of critical 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or
tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM
workstations, concentrators, IP telephony and traditional PBX switching systems.
Package Includes
SU2200RTXL2U On-line Double-Conversion UPS System
PowerAlert Software and cabling
Mounting hardware for 4 post rackmount installation/tower stands
Instruction manual with warranty information
Features
True on-line, double conversion UPS provides pure, sine wave AC output at all times
Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
Removes harmonic distortion, electrical impulses, frequency variations and other hard to solve power problems
Accepts input voltages between 80 and 138 (65 to 138 at loads under 70%), regulating output to 120v +/-2%
2200VA/1600 watt power capacity with 7 total outlets (6 NEMA 5-15/20R & 1 NEMA L5-20)
Standard internal battery set provides 18 minutes runtime at half load
Expandable runtime with multiple external battery packs (part# BP48V21-2U)
Innovative design makes unit adaptable for rackmount or tower applications (tower stands included)
Uses only 2 rack spaces (2U) in standard 19 inch rack
DB9 serial port for network interface; SNMP compatible
Slot for optional SNMP/web card (part# SNMPWEBCARD)
PowerAlert unattended shutdown software and 6 ft. network cable included
Fault tolerant auto-bypass maintians continuous utility output to connected equipment, even in cases where the UPS is overloaded or
suffers an internal failure that requires service
Compatible with Tripp Lite's Watchdog system service software
Mounting hardware included for 4 post rackmount installation, optional separate purchase accessory 2POSTRMKIT enables installation in 2
post telecom racks
Installed NEMA 5-20P input plug connects to 20A wall receptacle, includes user installable NEMA 5-15P replacement plug to enable
connection to a standard 15A wall socket
Diagnostic LEDs
Battery replacement door
$250,000 Ultimate Lifetime connected equipment insurance
2 year manufacturers product warranty
Specifications
OUTPUT
Frequency
compatibility
50 / 60 Hz
Output VA
2200
Output watts
1600
Output nominal
voltage
120V AC
Output voltage
regulation
Maintains full-time sine wave output within 2% of 120V, less than 5% total harmonic distortion
Output frequency
regulation
Regulates line frequency to 50/60Hz +/- 0.05Hz
Overload protection
Via 30A input breaker and dual 15A output breakers
Outlet quantity /
type
7 outlets (6 NEMA 5-15/20R, 1 NEMA L5-20)
Customized load
management
receptacles
"2 individually controllable load banks support automated load shedding and remote reboot on demand of locked
network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to
increase available runtime for servers and other critical devices. (each bank includes 3 outlets)"
INPUT
UPS Input cord
length (ft.)
10 ft. 12 gauge
Recommended
Electrical Service
120v
Maximum Input
Amps (A)
16.2
Maximum Input
Watts
1885
Input connection
type
NEMA 5-20P (includes user installable NEMA 5-15P replacement plug)
Voltage
compatibility (VAC)
120
BATTERY
Expandable battery
runtime
Supports extended runtime with optional external battery pack BP48V212U (multi-pack compatible)
DC system voltage
(VDC)
48
Battery Access
User replaceable, hot swap battery replacement supported via front access panel
Full load runtime
Internal batteries — 6 min.
1 BP48V212U battery pack (2200VA) — 24 min.
Half load runtime
Internal batteries — 18 min.
1 BP48V212U battery pack (1100VA) — 64 min.
Battery Pack
Accessory
(optional)
BP48V212U (optional)
Typical battery
lifespan
3-6 years, depending on usage
Battery recharge
rate
2-4 hours to 90%
VOLTAGE REGULATION
Voltage regulation
description
On-line, double-conversion power conditioning maintains output within 2% of 120 volts at all times
Overvoltage
correction
Maintains output of 120V +/-2% during overvoltages to 138V AC
Brownout
correction
Maintains output of 120V +/-2% during undervoltages to 80V AC
Severe brownout
correction
At load levels less than 70%, UPS maintains output of 120V +/-2% during undervoltages to 65V AC
LEDS ALARMS & SWITCHES
Alarms
Multi-function audible alarm offers notification of UPS start, backup operation, low battery warning, overload, UPS fault
and remote shutdown
Switches
Includes main power off/on switch, plus 1 switch to select battery charge / load level display
Front panel LEDs
6 LED STATUS DISPLAY: line power (green), online (green), bypass (yellow), on battery (green), overload (red),
battery low (yellow)
4 LED LOAD / BATTERY LEVEL DISPLAY (100%, 75%, 50%, 25%)
SURGE / NOISE SUPPRESSION
UPS AC
suppression joule
rating
2440 joules
EMI / RFI AC noise
suppression
Yes
AC suppression
response time
Instantaneous
PHYSICAL
Shipping weight
(lbs)
69.4
Shipping weight
(kg)
31.5
Cooling method
Built-in cooling fan
Unit Dimensions
(HWD/in)
3.5 x 17.5 x 22
Unit Dimensions
(HWD/cm)
8.89 x 44.5 x 52.8
Unit weight (lbs)
54.6
Unit weight (kg)
24.8
Material of
construction
Steel
Form factors
supported
Supports 2U rackmount installation in 4 post rack enclosures. 2 post rackmount installation supported with optional
2POSTRMKIT. Upright tower installation supported with included tower stands
ENVIRONMENTAL
Relative Humidity
0 to 95%, non-condensing
COMMUNICATIONS
WatchDog
compatibility
Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft
reboot of application / OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications
Network
monitoring port
One built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure basic monitoring
capability
EPO port
Supports "Emergency Power Off" via special-order cabling, contact Tripp Lite for more information
SNMP compatibility
Yes, includes slot for optional SNMPWEBCARD accessory (#SNMPWEBCARD)
Software and
cabling included
Yes, includes PowerAlert software CD-ROM and complete cabling
LINE / BATTERY TRANSFER
Transfer time from
line power to
battery mode
Zero, online UPS continuously converts incoming AC-to-DC, then back to AC. When commercial power is interrupted,
UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.
Low voltage
transfer to battery
power
Maintains continuous operation during undervoltages as low as 80V (65V at load levels under 70%). Below this
switchover point, output is supported from battery derived AC power.
High voltage
transfer to battery
power
Maintains continuous operation without using battery power during overvoltages to 138V. Above this point, output is
supported from battery derived AC power.
SPECIAL FEATURES
Appearance
Attractive black steel rackmount housing
Cold Start
Yes, inverter can be "cold started" to enable temporary AC output during a power failure
CERTIFICATIONS
Certifications
Tested to UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico)
WARRANTY
Product Warranty
Period (Worldwide)
2-year limited warranty
Optional Coverage
3-5 year warranties, plus next day and on-site warranty coverage available for select opportunities. Contact Tripp Lite
for additional information.
Connected
Equipment
Insurance (U.S.,
Canada & Puerto
Rico)
$250,000 Ultimate Lifetime Insurance
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?variables.txtModelID=2475.
Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising