2040756 Equipment Lock
Assembly Instructions
Perks™
Equipment Lock
Page 1 of 2
Figure A
Tools Required
■
⁄16" Drill Bit
11
Installation
Removable
Lock Core
1. The Equipment Lock consists of two locks tethered together
by a stainless steel cable. The rear of each lock has a
T-shaped prong which engages into the Kensington slot that
is located in laptop computers, docking stations, printers,
CPU towers and other portable electronic equipment. The
two locks are equipped with removable lock cores which can
be re-keyed to suit user-preference. (Figure A).
Kensington
Anchor
Kensington Slot
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2112656 Revision A-09
Assembly Instructions
Perks™
Page 2 of 2
Installation (continued)
Figure C
Scenario
■
■
The Senario Tables have a Kensington slot machined into
each undersurface support arm. One end of the security
cable secures to the slot in the furniture, the other can be
secured into the Kensington slot in the portable equipment.
(Figure B).
The round Scenario tables have a Kensington slot located in
the mounting plate on the underside of the worksurface.
(Figure C).
Kensington Slot
Hum
■
The Hum cable managers have Kensington slots stamped
into the lower floor of the tray. One end of the security
cable secures to the slot in the cable manager, the other end
can be secured into the Kensington slot in the portable
equipment. (Figure D).
Figure D
Kensington Slot
Kensington Wood Anchor
T 800.482.1818
F 812.482.8300
The Kensington Wood Anchor can be field-installed into
any wood-based panel. Bore an 11⁄16 x 1⁄2" deep hole into the
furniture, push the Kensington Wood Anchor into the hole,
and tighten the screw to secure the anchor to the furniture.
We recommend the underside of a worksurface (near a
grommet hole) or the inside of an end panel as potential
hole location. (Figure E).
Figure B
Figure E
Kensington Slot
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2112656
Revision A-09
Printed in U.S.A. © 2009 Kimball International, Inc.
■
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising