bretford antimicrobial product solutions pre

bretford antimicrobial product solutions pre
BRETFORD ANTIMICROBIAL PRODUCT SOLUTIONS
PRE-ASSEMBLED NOTEBOOK STORAGE CART
Features multi-surface antimicrobial protection that
is intended to inhibit the growth of bacteria odors,
mold, mildew and fungi.
Made In The USA
LAPTG15SA & LAPTG15ESA
have been tested by TUV to UL
60950 Safety of Informational
Technology Standards for the United
States and Canadian markets.
FEATURES
• Cart features a multi-surface antimicrobial finish that is incorporated during the manufacturing process which is intended to inhibit growth of
bacteria odors, mold, mildew and fungus. The antimicrobial finish will not wash off and is effective for the useful life of the product.
• Welded and ships fully assembled from the factory, simply uncrate and use.
• LAPTG15SA-CTMBT does not include any electrical components.
• LAPTG15ESA-CTMBT includes 15-outlet, UL listed, overload protected, electrical panel to charge laptops. Electrical panel is accessed by a rear
door, door is secured with a combination padlock.
• Cart features two shelves with eight compartments per shelf for up to 16 laptops, shelf dividers may be removed for storing larger items.
• Top shelf can be used as a space for laptop and printer or as a general working surface.
• Individual cord holders for each laptop provide convenient cord management.
• Solid steel construction and locking doors ensure security of equipment.
• Doors lock with a Bretford re-settable combination lock, two locks included.
• Single grommet hole in back of unit enables electrical unit to be plugged into wall for easy charging of laptops.
• 5" casters, two lock, allow cart to be rolled easily from room to room.
• Features ventilation holes in the back panel to cool equipment when charging.
• Constructed using an average 30% post-consumer recycled steel content and finished in environmentally friendly antimicrobial powder paint.
Steel components are 100% recyclable at the end of the product life cycle.
• Made in the USA.
DIMENSIONS
Overall:
ponents are fully recyclable at the end of the product life cycle.
35-1⁄2"w x 21-1/2"d x 38"h
Storage Compartments - Top Shelf: 4"w x 14-3/4"d x 13-1⁄2"h
Storage Compartments - Bottom Shelf: 4"w x 20"d x 13-1⁄2"h
CART ASSEMBLY SPECIFICATIONS
Notebook Storage Cart shall come fully assembled and have one (1)
33-1⁄2"w x 22-1⁄2"d, 18-gauge steel work surface shelf which shall
COLOR & FINISH
Concrete (-CTMBT) antimicrobial powder paint
have one (1) 2" diameter grommet hole in rear of shelf to feed cords
to electrical units. Cart shall also have one (1) 33-1⁄2"w x 21-1⁄2"d, 18gauge steel bottom shelf, and one (1) 33-1/2"w x 19-1/2"d middle
shelf. Middle shelf includes a welded 14-gauge steel lock bracket that
protrudes through the front doors and secures using a padlock.
Concrete
-CTMBT
Bottom and middle shelves can be divided with up to seven (7)
divider shelves that create up to eight 4-3⁄16"w x 15/1/2"d x 13-1⁄2"h
computer compartments per shelf. Dividers may be removed for
STANDARD EQUIPMENT
33-1/2"w x 21-1/2"d Top Shelf
33-1/2"w x 19-1/2"d Bottom Shelf
33-1/2"w x 19"d Interior Shelf
Steel Divider Panels (14)
Non Slip Rubber Shelf Mats (3)
Back Door Panel
Front Doors Panels (2)
15 Outlet Electrical Panel (1) [LAPTG15ESA-CTMBT Only]
5" Plate Casters (4)
Built In Handle (2)
Four Dial Combination Padlocks (2)
WEIGHT AND FREIGHT CLASS
LAPTG15SA-CTMBT: 139 lbs., Freight class 125 LTL
LAPTG15ESA-CTMBT: 154 lbs., Freight class 125 LTL
Ships pre-assembled in one (1) carton pack
CARTON DIMENSIONS & UPC CODE
Carton: 40"w x 26"d x 42-1/2"h
Note: All laptop carts are secured to a 42"w x 30"d skid at the time
of shipping. Carriers are instructed not to remove the product from
the skid to prevent damage.
LAPTG15SA-CTMBT: 0 96633 32796 6
LAPTG15ESA-CTMBT: 0 96633 32795 9
MADE IN THE USA
LAP series laptop storage carts are made at Bretford’s Chicago area
larger equipment. Dividers are 18-gauge steel. Top shelf shall be
covered with a black rubber mat so equipment does not slide and
bottom and middle shelves shall be also be covered with a black
rubber mat cut to accommodate divider shelves. Cabinet structure
comes pre-assembled and consists of a pre-welded 18-gauge, 1"
square tubing frame, 20-gauge pre-welded steel side panels, and a
20-gauge pre-welded back panel. Two 20-gauge steel doors mount
to the front of the cabinet and secure using a re-programmable, fourdial combination padlock. Rear access door is 20-gauge steel and
perforated to ventilate equipment. Rear door secures using a reprogrammable, four-dial combination padlock. Back panel has one (1)
2" diameter grommet hole located at the bottom rear for cord
management. LAPTG15ESA-CTMBT shall have one (1) UL listed,
fifteen (15) outlet electrical panel which shall be attach inside the
upper back of the cabinet and is accessed by the back door panel.
Unit has four (4) 5" stem casters, two with locking brakes. Cart shall
have two (2) integrated push handles to easily move cart from one
location to another. Each model painted in antimicrobial Concrete
powder paint and is constructed from “prime” steel which contains
25% to 35% post-consumer recycled content. Ships assembled by
truck only.
ELECTRICAL UNIT SPECIFICATIONS
Electrical panel on the LAPTG15ESA-CTMBT is attached to the upper
back section of the cabinet and is accessed by the rear door. Unit is
UL listed, overload protected, includes a 20' power cord, and has an
on/off switch located on the side. The electrical unit is rated for a
maximum of 15 amps usage, however, to prevent nuisance tripping of
the breaker you should not
manufacturing facility using union labor.
an extended period of time,
ANTIMICROBIAL FINISH SPECIFICATIONS
Notebook carts are finished in antimicrobial powder paint, which is
intended to inhibit the growth of bacteria odors, mold, mildew and
fungi. Antimicrobial properties are incorporated into a powder paint
finish and applied during the finishing process, covering the entire
product. Antimicrobial finish is colorless, odorless, will not wash off,
and remains effective for the life of the product.
ENVIRONMENTAL SPECIFICATIONS
THE BACK OF THE UNIT
OPENS FOR EASY ACCESS
TO THE ELECTRICAL UNIT.
The LAPTG15 series carts are constructed using “prime” steel which
has a 25% to 35% post-consumer recycled content and all steel com-
11000 SEYMOUR AVENUE
FRANKLIN PARK, ILLINOIS 60131 USA
TOLL FREE PHONE 800-521-9614
PHONE 847-678-2545
TOLL FREE FAX 800-343-1779
FAX 847-678-0852
WWW.BRETFORD.COM
©2002 Bretford / mbt_laptop_assembled_laptg15 / 07-28-2010
exceed 13 amps of usage for
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising