P L E A S E T H I N K B E F O R E Y O U P RI NT Specifications SMART Board™ Interactive Whiteboard Model V280 Physical Specifications Size Active Screen Area (maximum interactive, projected image) Weight 64" W × 53 1/8" H × 4" D (162.4 cm × 134.9 cm × 10.1 cm) 61 5/8" W × 46 1/4" H (156.5 cm × 117.3 cm) 77" diagonal (195.6 cm) 30 lb. (13.6 kg) Shipping Size 1 unit 8 units on pallet 58 7/8" W × 74" H × 6 5/8" D (149.5 cm × 188 cm × 16.8 cm) 58 7/8" W × 78 1/2" H × 52 7/8" D (149.5 cm × 199.4 cm × 134.4 cm) Shipping Weight 1 unit 8 units on pallet 70 lb. (31.8 kg) 585 lb. (265.4 kg) All dimensions +/- 1/8" (0.3 cm). All weights +/- 2 lb. (0.9 kg). Standard Features Software Includes SMART Notebook software. Software upgrades are available at www.smarttech.com/support/software/index.asp. Warranty Your interactive whiteboard has a two-year limited equipment warranty or a five-year limited equipment warranty upon registration. See warranty document for details. NOTE To take full advantage of all the interactive features, you must connect a digital projector (not included). 2 | SPE CIF I CA TI ONS – S M A RT B O A R D I NT E R A C T I V E W HI TE B O A R D MOD EL V28 0 Interactive Whiteboard Features Pen Tray Pens Resolution Screen Surface Digitizing Technology Frame Finish Wall-Mount Bracket Computer Connection A simple, robust pen tray spans the width of your interactive whiteboard. Two pens, each powered by one AAA battery Touch resolution is approximately 4096 × 4096. The hard laminate surface is puncture-resistant and optimized for projection. DViT™ (Digital Vision Touch) technology uses two digital cameras to track the infrared pen tip across the display surface. Graphite gray frame and pen tray (approximates Pantone® 425C) and Ultrasonic Chrome valance (approximates metallic Pantone 877C) 32" (81.3 cm) wide with five screws and drywall anchors to support a wall-mounted interactive whiteboard High-speed connection via a proprietary 16' (5 m) USB 2.0 cable (supplied) NOTES – Power Requirements Security Certifications and Compliance You must use the cable supplied (Part No. 93-00611-20) to connect the SMART Board V280 interactive whiteboard to a computer. – The USB 2.0 cable meets the specific delay times, characteristic impedance, attenuation and shielding required for USB 2.0. Cables designed for USB 1.1 don’t work with your interactive whiteboard. The computer provides power directly through the USB cable for Windows® computers. Power consumption is less than 2.5 W (500 mA at 5V). Three Kensington® security slots CSA (U.S./Canada), CB, CE, China EIP, RoHS (Europe), WEEE Computer Requirements Windows Computers • • • • • Intel® Pentium® III, 1.2 GHz processor or faster 512 MB of RAM (1 GB recommended) 1 GB of free hard disk space for minimum installation (2 GB for full installation with Gallery collections) Laptops must be connected to an external power source Dedicated high-speed USB 2.0 compliant interface IMPORTANT – • • • Make sure your interactive whiteboard is connected to a USB 2.0 receptacle using the supplied USB 2.0 cable. – If you use USB 1.1 receptacles or cables that are designed specifically for USB 1.1, your interactive whiteboard doesn’t function. See the Computer Connection section above for more information. Windows XP operating system Service Pack 2 or later Updated USB Video Class (UVC) driver for Windows XP Service Pack 2 (recommended). See Microsoft® Corporation document 899271. Internet Explorer® Internet browser 6.0 or later 3 | SPE CIF I CA TI ONS – S M A RT B O A R D I NT E R A C T I V E W HI TE B O A R D MOD EL V28 0 • • Adobe® Flash® Player version 8 Microsoft DirectX® technology 8.1 or later (required for SMART Video Player) Disclaimer: The user acknowledges and accepts that the processing power of the computer stated above is required when the SMART Board V280 interactive whiteboard is used with a standard projector. The user further acknowledges and accepts that in the event that accessories are added to the computer (including but not limited to the AirLiner™ slate, the SMART Response (formerly Senteo™) interactive response system and/or the SMART Document Camera), the user will be required to increase the processing power of the computer substantially. SMART will not be held responsible or liable for any damage caused or loss suffered as a result of insufficient processing power. Storage and Operating Specifications Storage Operation -40°F to 120°F (-40°C to 50°C) 41°F to 95°F (5°C to 35°C) with up to 80% humidity non-condensing SMART Order Numbers SBV280 77" (195.6 cm) diagonal SMART Board V280 interactive whiteboard Optional Accessories 93-00611-20 RPEN-SBV280 FRU-NIB-SBV280 FSV280 FSV280-WLS2-FSV WLS2-FSV USB-XT 16' (5 m) USB 2.0 cable for SMART Board V280 interactive whiteboards Replacement pen for SMART Board V280 interactive whiteboards Replacement pen nib for SMART Board V280 interactive whiteboards Mobile floor stand for SMART Board V280 interactive whiteboards (optional wheel kit available) Mobile floor stand for SMART Board V280 interactive whiteboards (two wheels included) Set of two wheels for the SMART Board V280 interactive whiteboard’s mobile floor stand SMART Active USB Extension Cable NOTE Use this extension cable (USB-XT) with the included cable (Part No. 93-00611-20). 4 | SPE CIF I CA TI ONS – S M A RT B O A R D I NT E R A C T I V E W HI TE B O A R D MOD EL V28 0 IMPORTANT • Connect an external power supply (not included) to your SMART Board V280 interactive whiteboard when using a bus-powered hub, such as the SMART Active USB Extension Cable, with your product. This power supply ensures that your interactive whiteboard receives enough power to function reliably. • Only use USB extension cables that are active. (An active device includes circuitry for regenerating the USB signals.) • The external power supply (when required) must meet the Limited Power Source (LPS) requirements of CSA/UL/IEC/EN 60950-1. This external power supply should meet the following specifications. Specification Parameter Power Supply • 5V DC with 5% or better regulation • 1.5A of current (typical draw = 500 mA) Connector 1/4" × 1/8" (6.4 mm × 3.2 mm), center positive coaxial connector International Support 120-240 VAC input Certifications and Compliance Limited Power Source (LPS) requirements of CSA/UL/IEC/EN 60950-1 5 | SPE CIF I CA TI ONS – S M A RT B O A R D I NT E R A C T I V E W HI TE B O A R D MOD EL V28 0 Physical Dimensions Wall-Mounted Side View Wall-Mounted Cutaway View 3" (7.7 cm) 6" (15.2 cm) 5 3/8" (13.7 cm) Leave at least 5/8" (1.6 cm) headroom to wall-mount your SMART Board V280 interactive whiteboard. 4" (10.1 cm) Wall-Mounted Front View 64" (162.4 cm) 46 1/4" (117.3 cm) 53 1/8" (134.9 cm) 61 5/8" (156.5 cm) " 77 .6 95 (1 cm ) The recommended wall-mounted installation height to the top of your SMART Board V280 interactive whiteboard for average sized adults is 84" (213.4 cm). USB Connection Location www.smarttech.com/support www.smarttech.com/contactsupport Support +1.403.228.5940 or Toll Free 1.866.518.6791 (U.S./Canada) ©2009 SMART Technologies ULC. All rights reserved. The SMART logo, DViT, SMART Board, AirLiner, Senteo and smarttech are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. Microsoft, Windows, Internet Explorer and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. All other third-party product and company names may be trademarks of their respective owners. Patent No. US5448263; US6141000; US6320597; US6326954; US6337681; US6741267; US6747636; US6803906; US6947032; US6954197; US7151533; US7184030; US7236162; US7289113; US7499033; CA2058219; CA2252302; EP1297488; ES2279823; ZL0181236.0; and DE60124549. Other patents pending. Contents subject to change without notice. 11/2009.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project